ASCEND-MIBIMAGROUP-MIB

File: ASCEND-MIBIMAGROUP-MIB.mib (8984 bytes)

Imported modules

ASCEND-MIB RFC1155-SMI RFC-1212

Imported symbols

configuration IpAddress OBJECT-TYPE

Defined Objects

mibimaGroupConfig 1.3.6.1.4.1.529.23.23
OBJECT IDENTIFIER    

mibimaGroupConfigTable 1.3.6.1.4.1.529.23.23.1
A list of mibimaGroupConfig profile entries.
OBJECT-TYPE    
  SEQUENCE OF  
    MibimaGroupConfigEntry

mibimaGroupConfigEntry 1.3.6.1.4.1.529.23.23.1.1
A mibimaGroupConfig entry containing objects that maps to the parameters of mibimaGroupConfig profile.
OBJECT-TYPE    
  MibimaGroupConfigEntry  

imaGroupConfig-Name 1.3.6.1.4.1.529.23.23.1.1.1
Name of IMA Group Config profile.
OBJECT-TYPE    
  DisplayString  

imaGroupConfig-Active 1.3.6.1.4.1.529.23.23.1.1.2
TRUE if the line is enabled, otherwise FALSE.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

imaGroupConfig-NailedGroup 1.3.6.1.4.1.529.23.23.1.1.3
The nailed group to which this IMA group belongs to
OBJECT-TYPE    
  INTEGER  

imaGroupConfig-GroupSymmetryMode 1.3.6.1.4.1.529.23.23.1.1.4
Symmetry mode of group to which this link belongs to
OBJECT-TYPE    
  INTEGER symmetricOperation(2), asymmetricOperation(3), configurationAsymmetric(4)  

imaGroupConfig-Version 1.3.6.1.4.1.529.23.23.1.1.5
IMA spec version
OBJECT-TYPE    
  INTEGER v10(2), v11(4)  

imaGroupConfig-DoVersionFallback 1.3.6.1.4.1.529.23.23.1.1.6
Automatically fall back to v 1.0 if FE is detected to be v 1.0, otherwise move to configAborted state
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

imaGroupConfig-Lasr 1.3.6.1.4.1.529.23.23.1.1.7
enable/disable LASR (Link addition and slow recovery) procedures
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

imaGroupConfig-NeTxClkMode 1.3.6.1.4.1.529.23.23.1.1.8
Group Clocking mode
OBJECT-TYPE    
  INTEGER ctc(2), itc(3)  



imaGroupConfig-ImaId 1.3.6.1.4.1.529.23.23.1.1.11
IMA ID of the group
OBJECT-TYPE    
  INTEGER  

imaGroupConfig-FrameLength 1.3.6.1.4.1.529.23.23.1.1.12
Frame length for the group (M)
OBJECT-TYPE    
  INTEGER n-32(33), n-64(65), n-128(129), n-256(257)  

imaGroupConfig-DiffDelayMax 1.3.6.1.4.1.529.23.23.1.1.13
Maximum differential delay of group in msec
OBJECT-TYPE    
  INTEGER  

imaGroupConfig-CheckFarEndImaId 1.3.6.1.4.1.529.23.23.1.1.14
check/compare the expected-far-end-ima-id with the far-end IMA ID during group start up
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

imaGroupConfig-ExpectedFarEndImaId 1.3.6.1.4.1.529.23.23.1.1.15
if check-far-end-ima-id set to yes, then the far-end IMA ID is compared against this number during group startup, GSM moves to ConfigAborted if it does not match
OBJECT-TYPE    
  INTEGER  

imaGroupConfig-FarEndCheckFrameLength 1.3.6.1.4.1.529.23.23.1.1.16
check/compare the Expected frame length with the far-end frame length during group start up
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

imaGroupConfig-ExpectedFarEndFrameLength 1.3.6.1.4.1.529.23.23.1.1.17
If far-end-check-frame-length is set to yes, then the far-end frame length is compared against this number during group startup, GSM moves to ConfigAborted, if it does not match.
OBJECT-TYPE    
  INTEGER n-32(33), n-64(65), n-128(129), n-256(257)  

imaGroupConfig-AtmIfDelay 1.3.6.1.4.1.529.23.23.1.1.18
minimum time (in seconds) between the subsequent ATM layer (ie IDCR changes) indications
OBJECT-TYPE    
  INTEGER  


imaGroupConfig-TppTestPattern 1.3.6.1.4.1.529.23.23.1.1.20
The test pattern transmitted in the ICP cell (octet 17) on the link during the IMA Test Pattern Procedure.
OBJECT-TYPE    
  INTEGER  

imaGroupConfig-TppState 1.3.6.1.4.1.529.23.23.1.1.21
Enable or disable the Test Pattern Procedure.
OBJECT-TYPE    
  INTEGER disabled(2), operating(3)  

imaGroupConfig-VpSwitchingVpi 1.3.6.1.4.1.529.23.23.1.1.22
The Vpi to be used for the VP switching. Rest of the valid VPIs in valid vpi-vci-range will be used for the VC switching. Changes in this range will take effect immediately. THE USER SHOULD BE VERY CAREFUL WHILE CHANGING THIS VALUE BECAUSE ALL CONNECTIONS ON THE LIM WHERE THIS PORT BELONGS WILL BE DROPPED IN ORDER TO MAKE THIS NEW VALUE EFFECTIVE IMMEDIATELY.
OBJECT-TYPE    
  INTEGER  

imaGroupConfig-Action-o 1.3.6.1.4.1.529.23.23.1.1.23
OBJECT-TYPE    
  INTEGER noAction(1), createProfile(2), deleteProfile(3)  

imaGroupConfig-IgnoreLineup 1.3.6.1.4.1.529.23.23.1.1.24
Ignore line up value for this IMA Group.
OBJECT-TYPE    
  INTEGER systemDefined(1), no(2), yes(3)  

Defined Objects

DisplayString  
OCTET STRING    

MibimaGroupConfigEntry  
SEQUENCE    
  DisplayString as imaGroupConfig-Name  
  INTEGER as imaGroupConfig-Active  
  INTEGER as imaGroupConfig-NailedGroup  
  INTEGER as imaGroupConfig-GroupSymmetryMode  
  INTEGER as imaGroupConfig-Version  
  INTEGER as imaGroupConfig-DoVersionFallback  
  INTEGER as imaGroupConfig-IgnoreLineup  
  INTEGER as imaGroupConfig-Lasr  
  INTEGER as imaGroupConfig-NeTxClkMode  
  INTEGER as imaGroupConfig-TxMinNumLinks  
  INTEGER as imaGroupConfig-RxMinNumLinks  
  INTEGER as imaGroupConfig-ImaId  
  INTEGER as imaGroupConfig-FrameLength  
  INTEGER as imaGroupConfig-DiffDelayMax  
  INTEGER as imaGroupConfig-CheckFarEndImaId  
  INTEGER as imaGroupConfig-ExpectedFarEndImaId  
  INTEGER as imaGroupConfig-FarEndCheckFrameLength  
  INTEGER as imaGroupConfig-ExpectedFarEndFrameLength  
  INTEGER as imaGroupConfig-AtmIfDelay  
  INTEGER as imaGroupConfig-TppTestLink  
  INTEGER as imaGroupConfig-TppTestPattern  
  INTEGER as imaGroupConfig-TppState  
  INTEGER as imaGroupConfig-VpSwitchingVpi  
  INTEGER as imaGroupConfig-Action-o