ASCEND-MIBL2TUNNEL-MIB

File: ASCEND-MIBL2TUNNEL-MIB.mib (24848 bytes)

Imported modules

ASCEND-MIB RFC1155-SMI RFC-1212

Imported symbols

configuration IpAddress OBJECT-TYPE

Defined Objects

mibl2TunnelGlobal 1.3.6.1.4.1.529.23.90
OBJECT IDENTIFIER    

mibl2TunnelGlobalTable 1.3.6.1.4.1.529.23.90.1
A list of mibl2TunnelGlobal profile entries.
OBJECT-TYPE    
  SEQUENCE OF  
    Mibl2TunnelGlobalEntry

mibl2TunnelGlobalEntry 1.3.6.1.4.1.529.23.90.1.1
A mibl2TunnelGlobal entry containing objects that maps to the parameters of mibl2TunnelGlobal profile.
OBJECT-TYPE    
  Mibl2TunnelGlobalEntry  

l2TunnelGlobal-Index-o 1.3.6.1.4.1.529.23.90.1.1.1
OBJECT-TYPE    
  INTEGER  

l2TunnelGlobal-PptpEnabled 1.3.6.1.4.1.529.23.90.1.1.2
Enables or disables support for the Point to Point Tunneling Protocol (PPTP).
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

l2TunnelGlobal-ServerProfileRequired 1.3.6.1.4.1.529.23.90.1.1.3
When set to 'YES', it requires that an enabled TUNNEL-SERVER profile exists before a tunnel is created. When set to 'NO', if a matching profile can't be found, the server is assumed enabled and the tunnel can be created.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

l2TunnelGlobal-L2tpMode 1.3.6.1.4.1.529.23.90.1.1.4
Layer 2 Tunneling Protocol operating mode.
OBJECT-TYPE    
  INTEGER disabled(1), lac(2), lns(3), lacAndLns(4)  

l2TunnelGlobal-L2tpAuthEnabled 1.3.6.1.4.1.529.23.90.1.1.5
Enables or disables L2TP tunnel authentication.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

l2TunnelGlobal-L2tpRxWindow 1.3.6.1.4.1.529.23.90.1.1.6
This value is the advertised L2TP receive window size for the data channel. A value of zero indicates that this box will ask for no flow control for inbound L2TP payloads.
OBJECT-TYPE    
  INTEGER  

l2TunnelGlobal-MaxLnsClients 1.3.6.1.4.1.529.23.90.1.1.7
The maximum number of clients that this box is allowed to support in LNS mode.
OBJECT-TYPE    
  INTEGER  

l2TunnelGlobal-L2tpSystemName 1.3.6.1.4.1.529.23.90.1.1.8
Sent to the remote tunnel endpoint during L2TP session establishment. An empty string indicates that the actual system name plus domain name will be used.
OBJECT-TYPE    
  DisplayString  

l2TunnelGlobal-L2tpConfig-FirstRetryTimer 1.3.6.1.4.1.529.23.90.1.1.9
The first interval before the L2TP Control Channel Transport Layer retransmits a control packet, in milliseconds. Subsequent retransmissions will increase the interval.
OBJECT-TYPE    
  INTEGER  

l2TunnelGlobal-L2tpConfig-RetryCount 1.3.6.1.4.1.529.23.90.1.1.10
The maximum number of times the L2TP Control Channel Transport Layer will retransmit a control packet.
OBJECT-TYPE    
  INTEGER  

l2TunnelGlobal-L2tpConfig-HelloTimer 1.3.6.1.4.1.529.23.90.1.1.11
The number of seconds that an L2TP Control Channel will be idle before sending a HELLO packet. If set to 0, HELLO packets will not be sent.
OBJECT-TYPE    
  INTEGER  

l2TunnelGlobal-L2tpConfig-ControlConnectEstablishTimer 1.3.6.1.4.1.529.23.90.1.1.12
The timeout interval for L2TP to establish a control connection session with its peer, in seconds.
OBJECT-TYPE    
  INTEGER  

l2TunnelGlobal-L2tpConfig-LacIncomingCallTimer 1.3.6.1.4.1.529.23.90.1.1.13
The timeout interval for the LAC to setup an incoming call with the LNS, in seconds.
OBJECT-TYPE    
  INTEGER  

l2TunnelGlobal-L2tpConfig-LnsIncomingCallTimer 1.3.6.1.4.1.529.23.90.1.1.14
The timeout interval for the LNS to setup an incoming call with the LAC, in seconds.
OBJECT-TYPE    
  INTEGER  

l2TunnelGlobal-L2tpConfig-BaseUdpPort 1.3.6.1.4.1.529.23.90.1.1.15
This value defines the base L2TP udp port to use for a card. A value of zero (the default) means that a non private port will be allocated dynamically.
OBJECT-TYPE    
  INTEGER  

l2TunnelGlobal-L2tpConfig-DialoutAuthLns 1.3.6.1.4.1.529.23.90.1.1.16
Restricts the LAC to accept dialout requests only from the LNS which has authenticated during the tunnel setup.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

l2TunnelGlobal-L2tpConfig-DialoutSendProfileName 1.3.6.1.4.1.529.23.90.1.1.17
Enables the LNS to send the Connection Profile Name VSA along with the Dialout Request.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

l2TunnelGlobal-L2tpConfig-AcctTunnelConnectionEncoding 1.3.6.1.4.1.529.23.90.1.1.18
Encoding of the Acct-Tunnel-Connection radius attribute
OBJECT-TYPE    
  INTEGER normal(1), decimalCallSerialNumber(2), hexadecimalCallSerialNumber(3)  

l2TunnelGlobal-L2fMode 1.3.6.1.4.1.529.23.90.1.1.20
Layer Two Forwarding operating mode.
OBJECT-TYPE    
  INTEGER disabled(1), nas(2), gw(3), nasAndGw(4)  

l2TunnelGlobal-L2fSystemName 1.3.6.1.4.1.529.23.90.1.1.21
Sent to the remote tunnel endpoint during L2F tunnel establishment. An empty string indicates that the actual system name plus domain name will be used.
OBJECT-TYPE    
  DisplayString  

l2TunnelGlobal-L2fRetryCount 1.3.6.1.4.1.529.23.90.1.1.22
The number of times L2F will resend control packets. The standard value as outlined in RFC2341 is 4.
OBJECT-TYPE    
  INTEGER  

l2TunnelGlobal-L2fRetryInterval 1.3.6.1.4.1.529.23.90.1.1.23
The interval between retries in seconds. A value of 0 (zero) means that an adaptative retry interval based on the retry number is used.
OBJECT-TYPE    
  INTEGER  

l2TunnelGlobal-L2fTunnelSecret 1.3.6.1.4.1.529.23.90.1.1.24
The authentication method used on the NAS to authenticate the home Gateway during L2F Tunnel establishment.
OBJECT-TYPE    
  INTEGER sharedTunnelSecret(1), distinctTunnelSecrets(2), eitherSharedOrDistinctTunnelSecret(3)  

l2TunnelGlobal-L2fIgnoreMidSequence 1.3.6.1.4.1.529.23.90.1.1.25
Determines whether a common sequence number is used for the L2F_PROTO PDUs for both the tunnel (MID=0) and the client connection.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

l2TunnelGlobal-Action-o 1.3.6.1.4.1.529.23.90.1.1.26
OBJECT-TYPE    
  INTEGER noAction(1), createProfile(2), deleteProfile(3)  

l2TunnelGlobal-L2tpConfig-VerifyRemoteHostName 1.3.6.1.4.1.529.23.90.1.1.27
If Tunnel Authentication is enabled, also verify the remote peer HostName AVP.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

l2TunnelGlobal-L2tpConfig-DefaultTunnelServer 1.3.6.1.4.1.529.23.90.1.1.28
Default tunnel server profile name. Used for dialout only.
OBJECT-TYPE    
  DisplayString  

l2TunnelGlobal-L2tpConfig-TunnelServerPreSccrqLookup 1.3.6.1.4.1.529.23.90.1.1.29
When Tunnel Authentication is enabled, this parameter controls whether a lookup is to be done for the Tunnel-Server profile before sending of the SCCRQ.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

l2TunnelGlobal-L2tpConfig-SuppressEndpointDiscriminator 1.3.6.1.4.1.529.23.90.1.1.30
When set to 'yes', in the absence of a MRRU LCP option, the LAC will suppress the Endpoint Discriminator LCP option from the LCP AVPs sent to the LNS.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

l2TunnelGlobal-L2tpConfig-LnsNasPortType 1.3.6.1.4.1.529.23.90.1.1.31
LNS NAS Port Type reporting. If Virtual, report virtual. If PortTypeAvp, report as specified by LAC.
OBJECT-TYPE    
  INTEGER virtual(1), portTypeAvp(2)  

l2TunnelGlobal-L2tpConfig-DigitalAsyncNasPortType 1.3.6.1.4.1.529.23.90.1.1.32
If LNS Acct NPT is set to PortTypeAvp but the LAC did not supply the NAS Port Type, report digital-async calls as specified here.
OBJECT-TYPE    
  INTEGER v120(3), v110(4)  

l2TunnelGlobal-L2tpConfig-RetryTimerMode 1.3.6.1.4.1.529.23.90.1.1.33
The mode in which the L2TP Control Channel Transport Layer retry timer operates. The default is Linear.
OBJECT-TYPE    
  INTEGER linear(1), exponential(2)  

l2TunnelGlobal-L2tpConfig-MaxRetryTimer 1.3.6.1.4.1.529.23.90.1.1.34
The maximum timeout interval used by the L2TP Control Channel Transport Layer before retransmitting a packet, in milliseconds. 0 indicates no limit.
OBJECT-TYPE    
  INTEGER  

l2TunnelGlobal-L2tpConfig-DataPktUdpCksum 1.3.6.1.4.1.529.23.90.1.1.35
If IP-GLOBAL:udp-cksum is set to TRUE, setting this field to 'no' disables the locally originated UDP checksum calculation for L2TP data packets.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

l2TunnelGlobal-L2tpConfig-MaxCallsPerTunnel 1.3.6.1.4.1.529.23.90.1.1.36
This value restricts the maximum number of calls that a tunnel can have at a given instance of time. When set to 0 the limit is removed.
OBJECT-TYPE    
  INTEGER  

mibtunnelServer 1.3.6.1.4.1.529.23.91
OBJECT IDENTIFIER    

mibtunnelServerTable 1.3.6.1.4.1.529.23.91.1
A list of mibtunnelServer profile entries.
OBJECT-TYPE    
  SEQUENCE OF  
    MibtunnelServerEntry

mibtunnelServerEntry 1.3.6.1.4.1.529.23.91.1.1
A mibtunnelServer entry containing objects that maps to the parameters of mibtunnelServer profile.
OBJECT-TYPE    
  MibtunnelServerEntry  

tunnelServer-ServerEndpoint 1.3.6.1.4.1.529.23.91.1.1.1
The name of the remote tunnel endpoint. It should be the hostname or IP address that identifies the remote tunnel server, as required by the specific tunnel protocol. Usually, it matches the 'Tunnel-Server-Endpoint' RADIUS attribute but it may be different.
OBJECT-TYPE    
  DisplayString  

tunnelServer-Enabled 1.3.6.1.4.1.529.23.91.1.1.2
A tunnel server can be disabled by setting this field to 'no'.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

tunnelServer-SharedSecret 1.3.6.1.4.1.529.23.91.1.1.3
The shared secret (password) needed to bring up an L2TP Control Channel or an L2F tunnel with this server.
OBJECT-TYPE    
  DisplayString  

tunnelServer-MaxClients 1.3.6.1.4.1.529.23.91.1.1.4
The maximum number of clients that this tunnel may carry.
OBJECT-TYPE    
  INTEGER  

tunnelServer-ValidCallTypes 1.3.6.1.4.1.529.23.91.1.1.5
The valid call types that can be carried on this tunnel.
OBJECT-TYPE    
  INTEGER allCalls(1), analogCalls(2), digitalCalls(3)  

tunnelServer-IpsecProfile 1.3.6.1.4.1.529.23.91.1.1.6
Name of the ipsec profile which should be used to build the IPSec Scheme for the IP Packets sent and received from this server.
OBJECT-TYPE    
  DisplayString  

tunnelServer-ClientAuthId 1.3.6.1.4.1.529.23.91.1.1.7
The system name used by the Tunnel Initiator during Tunnel establishment for the purposes of tunnel authentication. This is different and independent from user authentication. In L2TP, this name is sent on the SCCRQ command. Used on L2TP and L2F.
OBJECT-TYPE    
  DisplayString  

tunnelServer-ServerAuthId 1.3.6.1.4.1.529.23.91.1.1.8
The system name used by the Tunnel Terminator during Tunnel establishment for the purposes of tunnel authentication. This is different and independent from user authentication. In L2TP, this name is sent on the SCCRP command. Used on L2TP and L2F.
OBJECT-TYPE    
  DisplayString  

tunnelServer-DialoutOptions-Enabled 1.3.6.1.4.1.529.23.91.1.1.9
Enables/Disables L2TP Dialout from this tunnel-server.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

tunnelServer-Action-o 1.3.6.1.4.1.529.23.91.1.1.16
OBJECT-TYPE    
  INTEGER noAction(1), createProfile(2), deleteProfile(3)  

tunnelServer-DialoutOptions-DialNumberLookup 1.3.6.1.4.1.529.23.91.1.1.17
If enabled, uses the dial number passed by the LNS to lookup a connection profile.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

tunnelServer-DialoutOptions-LookupPrefix 1.3.6.1.4.1.529.23.91.1.1.18
A short text string prepended to the username portion of a RADIUS L2TP dial number lookup request. It is used to distinguish between DNIS and CLID authentication requests and L2TP lookup request.
OBJECT-TYPE    
  DisplayString  

tunnelServer-DialoutOptions-DialNumberPrefix 1.3.6.1.4.1.529.23.91.1.1.19
A number to be prepended to the dialout number when placing the call. It can be used to provide locally required prefixes such as trunk numbers.
OBJECT-TYPE    
  DisplayString  

mibtunnelServer-DialoutOptions-DefaultCallMappingTable 1.3.6.1.4.1.529.23.91.2
A list of mibtunnelServer__dialout_options__default_call_mapping profile entries.
OBJECT-TYPE    
  SEQUENCE OF  
    MibtunnelServer-DialoutOptions-DefaultCallMappingEntry

mibtunnelServer-DialoutOptions-DefaultCallMappingEntry 1.3.6.1.4.1.529.23.91.2.1
A mibtunnelServer__dialout_options__default_call_mapping entry containing objects that maps to the parameters of mibtunnelServer__dialout_options__default_call_mapping profile.
OBJECT-TYPE    
  MibtunnelServer-DialoutOptions-DefaultCallMappingEntry  

tunnelServer-DialoutOptions-DefaultCallMapping-ServerEndpoint 1.3.6.1.4.1.529.23.91.2.1.1
OBJECT-TYPE    
  DisplayString  

tunnelServer-DialoutOptions-DefaultCallMapping-Index-o 1.3.6.1.4.1.529.23.91.2.1.2
OBJECT-TYPE    
  INTEGER  

tunnelServer-DialoutOptions-DefaultCallMapping-ValidEntry 1.3.6.1.4.1.529.23.91.2.1.3
When FALSE, this entry should be skipped when mapping calls.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

tunnelServer-DialoutOptions-DefaultCallMapping-BearerType 1.3.6.1.4.1.529.23.91.2.1.4
The bearer type used for the outgoing call.
OBJECT-TYPE    
  INTEGER any(4), digital(2), analog(3)  

tunnelServer-DialoutOptions-DefaultCallMapping-FramingType 1.3.6.1.4.1.529.23.91.2.1.5
The framing type used for the outgoing call.
OBJECT-TYPE    
  INTEGER any(4), sync(2), async(3)  

tunnelServer-DialoutOptions-DefaultCallMapping-DataService 1.3.6.1.4.1.529.23.91.2.1.6
The type of data service used for outgoing call for this bearer and framing type combination.
OBJECT-TYPE    
  INTEGER voice(1), n-56kRestricted(2), n-64kClear(3), n-64kRestricted(4), n-56kClear(5), n-384kRestricted(6), n-384kClear(7), n-1536kClear(8), n-1536kRestricted(9), n-128kClear(10), n-192kClear(11), n-256kClear(12), n-320kClear(13), dws384Clear(14), n-448Clear(15), n-512Clear(16), n-576Clear(17), n-640Clear(18), n-704Clear(19), n-768Clear(20), n-832Clear(21), n-896Clear(22), n-960Clear(23), n-1024Clear(24), n-1088Clear(25), n-1152Clear(26), n-1216Clear(27), n-1280Clear(28), n-1344Clear(29), n-1408Clear(30), n-1472Clear(31), n-1600Clear(32), n-1664Clear(33), n-1728Clear(34), n-1792Clear(35), n-1856Clear(36), n-1920Clear(37), x30RestrictedBearer(39), v110ClearBearer(40), n-64kX30Restricted(41), n-56kV110Clear(42), modem(43), atmodem(44), n-2456kV110(46), n-4856kV110(47), n-9656kV110(48), n-19256kV110(49), n-38456kV110(50), n-2456krV110(51), n-4856krV110(52), n-9656krV110(53), n-19256krV110(54), n-38456krV110(55), n-2464kV110(56), n-4864kV110(57), n-9664kV110(58), n-19264kV110(59), n-38464kV110(60), n-2464krV110(61), n-4864krV110(62), n-9664krV110(63), n-19264krV110(64), n-38464krV110(65), v32(66), phs64k(67), voiceOverIp(68), atmSvc(70), frameRelaySvc(71), vpnTunnel(72), wormarq(73), n-14456kV110(74), n-28856kV110(75), n-14456krV110(76), n-28856krV110(77), n-14464kV110(78), n-28864kV110(79), n-14464krV110(80), n-28864krV110(81), modem31khzAudio(82), x25Svc(83), n-144kClear(255), iptoip(263)  

Defined Objects

DisplayString  
OCTET STRING    

MibtunnelServerEntry  
SEQUENCE    
  DisplayString as tunnelServer-ServerEndpoint  
  INTEGER as tunnelServer-Enabled  
  DisplayString as tunnelServer-SharedSecret  
  INTEGER as tunnelServer-MaxClients  
  INTEGER as tunnelServer-ValidCallTypes  
  DisplayString as tunnelServer-IpsecProfile  
  DisplayString as tunnelServer-ClientAuthId  
  DisplayString as tunnelServer-ServerAuthId  
  INTEGER as tunnelServer-DialoutOptions-Enabled  
  INTEGER as tunnelServer-DialoutOptions-DialNumberLookup  
  DisplayString as tunnelServer-DialoutOptions-LookupPrefix  
  DisplayString as tunnelServer-DialoutOptions-DialNumberPrefix  
  INTEGER as tunnelServer-Action-o  

MibtunnelServer-DialoutOptions-DefaultCallMappingEntry  
SEQUENCE    
  DisplayString as tunnelServer-DialoutOptions-DefaultCallMapping-ServerEndpoint  
  INTEGER as tunnelServer-DialoutOptions-DefaultCallMapping-Index-o  
  INTEGER as tunnelServer-DialoutOptions-DefaultCallMapping-ValidEntry  
  INTEGER as tunnelServer-DialoutOptions-DefaultCallMapping-BearerType  
  INTEGER as tunnelServer-DialoutOptions-DefaultCallMapping-FramingType  
  INTEGER as tunnelServer-DialoutOptions-DefaultCallMapping-DataService  

Mibl2TunnelGlobalEntry  
SEQUENCE    
  INTEGER as l2TunnelGlobal-Index-o  
  INTEGER as l2TunnelGlobal-PptpEnabled  
  INTEGER as l2TunnelGlobal-ServerProfileRequired  
  INTEGER as l2TunnelGlobal-L2tpMode  
  INTEGER as l2TunnelGlobal-L2tpAuthEnabled  
  INTEGER as l2TunnelGlobal-L2tpRxWindow  
  INTEGER as l2TunnelGlobal-MaxLnsClients  
  DisplayString as l2TunnelGlobal-L2tpSystemName  
  INTEGER as l2TunnelGlobal-L2tpConfig-RetryTimerMode  
  INTEGER as l2TunnelGlobal-L2tpConfig-FirstRetryTimer  
  INTEGER as l2TunnelGlobal-L2tpConfig-MaxRetryTimer  
  INTEGER as l2TunnelGlobal-L2tpConfig-RetryCount  
  INTEGER as l2TunnelGlobal-L2tpConfig-HelloTimer  
  INTEGER as l2TunnelGlobal-L2tpConfig-ControlConnectEstablishTimer  
  INTEGER as l2TunnelGlobal-L2tpConfig-LacIncomingCallTimer  
  INTEGER as l2TunnelGlobal-L2tpConfig-LnsIncomingCallTimer  
  INTEGER as l2TunnelGlobal-L2tpConfig-BaseUdpPort  
  INTEGER as l2TunnelGlobal-L2tpConfig-DataPktUdpCksum  
  INTEGER as l2TunnelGlobal-L2tpConfig-DialoutAuthLns  
  INTEGER as l2TunnelGlobal-L2tpConfig-DialoutSendProfileName  
  INTEGER as l2TunnelGlobal-L2tpConfig-VerifyRemoteHostName  
  INTEGER as l2TunnelGlobal-L2tpConfig-AcctTunnelConnectionEncoding  
  DisplayString as l2TunnelGlobal-L2tpConfig-DefaultTunnelServer  
  INTEGER as l2TunnelGlobal-L2tpConfig-TunnelServerPreSccrqLookup  
  INTEGER as l2TunnelGlobal-L2tpConfig-SuppressEndpointDiscriminator  
  INTEGER as l2TunnelGlobal-L2tpConfig-MaxCallsPerTunnel  
  INTEGER as l2TunnelGlobal-L2tpConfig-LnsNasPortType  
  INTEGER as l2TunnelGlobal-L2tpConfig-DigitalAsyncNasPortType  
  INTEGER as l2TunnelGlobal-L2fMode  
  DisplayString as l2TunnelGlobal-L2fSystemName  
  INTEGER as l2TunnelGlobal-L2fRetryCount  
  INTEGER as l2TunnelGlobal-L2fRetryInterval  
  INTEGER as l2TunnelGlobal-L2fTunnelSecret  
  INTEGER as l2TunnelGlobal-L2fIgnoreMidSequence  
  INTEGER as l2TunnelGlobal-Action-o