ASCEND-MIBSDSLNET-MIB

File: ASCEND-MIBSDSLNET-MIB.mib (14289 bytes)

Imported modules

ASCEND-MIB RFC1155-SMI RFC-1212

Imported symbols

configuration IpAddress OBJECT-TYPE

Defined Objects

mibsdslNetworkProfile 1.3.6.1.4.1.529.23.8
OBJECT IDENTIFIER    

mibsdslNetworkProfileTable 1.3.6.1.4.1.529.23.8.1
A list of mibsdslNetworkProfile profile entries.
OBJECT-TYPE    
  SEQUENCE OF  
    MibsdslNetworkProfileEntry

mibsdslNetworkProfileEntry 1.3.6.1.4.1.529.23.8.1.1
A mibsdslNetworkProfile entry containing objects that maps to the parameters of mibsdslNetworkProfile profile.
OBJECT-TYPE    
  MibsdslNetworkProfileEntry  

sdslNetworkProfile-Shelf-o 1.3.6.1.4.1.529.23.8.1.1.1
OBJECT-TYPE    
  INTEGER  

sdslNetworkProfile-Slot-o 1.3.6.1.4.1.529.23.8.1.1.2
OBJECT-TYPE    
  INTEGER  

sdslNetworkProfile-Item-o 1.3.6.1.4.1.529.23.8.1.1.3
OBJECT-TYPE    
  INTEGER  

sdslNetworkProfile-Name 1.3.6.1.4.1.529.23.8.1.1.4
For future use. The current design does not use the name field but instead references Sdsl lines by the physical address; we may in the future support referencing Sdsl lines by name as well as by address. The name consists of a null terminated ascii string supplied by the user; it defaults to the ascii form of the Sdsl line physical address.
OBJECT-TYPE    
  DisplayString  

sdslNetworkProfile-PhysicalAddress-Shelf 1.3.6.1.4.1.529.23.8.1.1.5
The number of the shelf that the addressed physical device resides on.
OBJECT-TYPE    
  INTEGER anyShelf(1), shelf1(2), shelf2(3), shelf3(4), shelf4(5), shelf5(6), shelf6(7), shelf7(8), shelf8(9), shelf9(10)  

sdslNetworkProfile-PhysicalAddress-Slot 1.3.6.1.4.1.529.23.8.1.1.6
The number of the slot that the addressed physical device resides on.
OBJECT-TYPE    
  INTEGER anySlot(1), slot1(2), slot2(3), slot3(4), slot4(5), slot5(6), slot6(7), slot7(8), slot8(9), slot9(10), slot10(11), slot11(12), slot12(13), slot13(14), slot14(15), slot15(16), slot16(17), slot17(18), slot18(19), slot19(20), slot20(21), slot21(22), slot22(23), slot23(24), slot24(25), slot25(26), slot26(27), slot27(28), slot28(29), slot29(30), slot30(31), slot31(32), slot32(33), slot33(34), slot34(35), slot35(36), slot36(37), slot37(38), slot38(39), slot39(40), slot40(41), aLim(55), bLim(56), cLim(57), dLim(58), leftController(49), rightController(50), controller(42), firstControlModule(53), secondControlModule(54), trunkModule1(45), trunkModule2(46), controlModule(51), slotPrimary(59)  

sdslNetworkProfile-PhysicalAddress-ItemNumber 1.3.6.1.4.1.529.23.8.1.1.7
A number that specifies an addressable entity within the context of shelf and slot.
OBJECT-TYPE    
  INTEGER  

sdslNetworkProfile-Enabled 1.3.6.1.4.1.529.23.8.1.1.8
TRUE if the line is enabled, otherwise FALSE.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

sdslNetworkProfile-ProfileNumber 1.3.6.1.4.1.529.23.8.1.1.9
For potential backwards compatibility. The current design consists of one line profile numbered 0.
OBJECT-TYPE    
  INTEGER  

sdslNetworkProfile-LineConfig-TrunkGroup 1.3.6.1.4.1.529.23.8.1.1.10
The trunk group to which this line is assigned. 0 means this line is not part of a trunk group.
OBJECT-TYPE    
  INTEGER  

sdslNetworkProfile-LineConfig-NailedGroup 1.3.6.1.4.1.529.23.8.1.1.11
A number that identifies the set of lines that makes up a nailed group. 0 means this line is not part of a nailed group.
OBJECT-TYPE    
  INTEGER  

sdslNetworkProfile-LineConfig-RoutePort-SlotNumber-SlotNumber 1.3.6.1.4.1.529.23.8.1.1.12
OBJECT-TYPE    
  INTEGER  

sdslNetworkProfile-LineConfig-RoutePort-SlotNumber-ShelfNumber 1.3.6.1.4.1.529.23.8.1.1.13
TNT is a multi shelf system. To minimise the changes required to existing code the shelf number is added to this structure as it will almost always be needed when a slot number is needed.
OBJECT-TYPE    
  INTEGER  

sdslNetworkProfile-LineConfig-RoutePort-RelativePortNumber-RelativePortNumber 1.3.6.1.4.1.529.23.8.1.1.14
OBJECT-TYPE    
  INTEGER  

sdslNetworkProfile-LineConfig-Activation 1.3.6.1.4.1.529.23.8.1.1.15
Line activation mode.
OBJECT-TYPE    
  INTEGER static(1), dsrActive(2), dcdDsrActive(3)  

sdslNetworkProfile-LineConfig-DataRateMode 1.3.6.1.4.1.529.23.8.1.1.19
The data rate mode defines the mode for modem training. This parameter does not pertain to the old 16 port sdsl card.
OBJECT-TYPE    
  INTEGER autobaud(2), singlebaud(3), fastautobaud(4)  

sdslNetworkProfile-LineConfig-MaxRate 1.3.6.1.4.1.529.23.8.1.1.20
The symetrical interface rate. This parameter does not pertain to the old 16 port sdsl card.
OBJECT-TYPE    
  INTEGER n-144000(1), n-272000(2), n-400000(3), n-528000(4), n-784000(5), n-1168000(6), n-1552000(7), n-2320000(8), n-160000(9), n-192000(10), n-208000(11), n-384000(12), n-416000(13), n-768000(14), n-1040000(15), n-1152000(16), n-1536000(17), n-1568000(18), n-1680000(19), n-1920000(20), n-2160000(21)  

sdslNetworkProfile-LineConfig-UnitType 1.3.6.1.4.1.529.23.8.1.1.21
The Unit Type defines if a line is acting as either a Central Office (COE) or Customer Premise Equipment (CPE). Note that the remote unit needs to be configured opposite to this configureation. This parameter does not pertain to the old 16 port sdsl card.
OBJECT-TYPE    
  INTEGER coe(1), cpe(2)  

sdslNetworkProfile-Action-o 1.3.6.1.4.1.529.23.8.1.1.22
OBJECT-TYPE    
  INTEGER noAction(1), createProfile(2), deleteProfile(3)  

sdslNetworkProfile-LineConfig-Enabled 1.3.6.1.4.1.529.23.8.1.1.24
TRUE if the line is enabled, otherwise FALSE.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

sdslNetworkProfile-LineConfig-AutoBaseRate 1.3.6.1.4.1.529.23.8.1.1.25
When the Rate Mode is set to auto. This parameter defines the base rate that the auto rate mechanism uses to start its initial training with.
OBJECT-TYPE    
  INTEGER n-144000(1), n-272000(2), n-400000(3), n-528000(4), n-784000(5), n-1168000(6), n-1552000(7), n-2320000(8), n-160000(9), n-192000(10), n-208000(11), n-384000(12), n-416000(13), n-768000(14), n-1040000(15), n-1152000(16), n-1536000(17), n-1568000(18), n-1680000(19), n-1920000(20), n-2160000(21)  

sdslNetworkProfile-LineConfig-DataSense 1.3.6.1.4.1.529.23.8.1.1.26
If this value is set to Inverted, the Tx data will be inverted and the Rx data will be expected to be inverted. Otherwise the Tx and Rx data will be non-inverted.
OBJECT-TYPE    
  INTEGER normal(1), inv(2)  

sdslNetworkProfile-LineConfig-VpSwitchingVpi 1.3.6.1.4.1.529.23.8.1.1.27
The Vpi to be used for the VP switching. Rest of the valid VPIs in valid vpi-vci-range will be used for the VC switching. Changes in this range will take effect immediately. THE USER SHOULD BE VERY CAREFUL WHILE CHANGING THIS VALUE BECAUSE ALL CONNECTIONS ON THE LIM WHERE THIS PORT BELONGS WILL BE DROPPED IN ORDER TO MAKE THIS NEW VALUE EFFECTIVE IMMEDIATELY.
OBJECT-TYPE    
  INTEGER  

sdslNetworkProfile-DhcpConfig-IpAddress 1.3.6.1.4.1.529.23.8.1.1.28
The static address to be assigned to dhcp client.
OBJECT-TYPE    
  IpAddress  

sdslNetworkProfile-DhcpConfig-MaxLease 1.3.6.1.4.1.529.23.8.1.1.29
A number representing maximum number lease requests that would be granted.
OBJECT-TYPE    
  INTEGER  

sdslNetworkProfile-LineConfig-SdslDataFormat 1.3.6.1.4.1.529.23.8.1.1.30
If this value is set to Mag bit 1st, the sdsl-data-format outputs the magnitude before the sign bit. Otherwise with value set to sign bit 1st, the sdsl-data-format outputs the sign before the magnitude bit. This is our default.
OBJECT-TYPE    
  INTEGER serial(1)  

sdslNetworkProfile-SparingMode 1.3.6.1.4.1.529.23.8.1.1.31
Port sparing operational mode for this port.
OBJECT-TYPE    
  INTEGER inactive(1), manual(2), automatic(3)  

sdslNetworkProfile-LineConfig-LineMode 1.3.6.1.4.1.529.23.8.1.1.32
This line can be configured to run in ATM or HDLC serial mode.
OBJECT-TYPE    
  INTEGER atm(1), hdlc(2)  

sdslNetworkProfile-LineConfig-LoopBack 1.3.6.1.4.1.529.23.8.1.1.33
Configuration of different modem loopbacks.
OBJECT-TYPE    
  INTEGER none(1), analog(2), digital(3)  

sdslNetworkProfile-IgnoreLineup 1.3.6.1.4.1.529.23.8.1.1.34
Ignore line up value for this port.
OBJECT-TYPE    
  INTEGER systemDefined(1), no(2), yes(3)  

Defined Objects

DisplayString  
OCTET STRING    

MibsdslNetworkProfileEntry  
SEQUENCE    
  INTEGER as sdslNetworkProfile-Shelf-o  
  INTEGER as sdslNetworkProfile-Slot-o  
  INTEGER as sdslNetworkProfile-Item-o  
  DisplayString as sdslNetworkProfile-Name  
  INTEGER as sdslNetworkProfile-PhysicalAddress-Shelf  
  INTEGER as sdslNetworkProfile-PhysicalAddress-Slot  
  INTEGER as sdslNetworkProfile-PhysicalAddress-ItemNumber  
  INTEGER as sdslNetworkProfile-Enabled  
  INTEGER as sdslNetworkProfile-SparingMode  
  INTEGER as sdslNetworkProfile-ProfileNumber  
  INTEGER as sdslNetworkProfile-IgnoreLineup  
  INTEGER as sdslNetworkProfile-LineConfig-TrunkGroup  
  INTEGER as sdslNetworkProfile-LineConfig-NailedGroup  
  INTEGER as sdslNetworkProfile-LineConfig-VpSwitchingVpi  
  INTEGER as sdslNetworkProfile-LineConfig-RoutePort-SlotNumber-SlotNumber  
  INTEGER as sdslNetworkProfile-LineConfig-RoutePort-SlotNumber-ShelfNumber  
  INTEGER as sdslNetworkProfile-LineConfig-RoutePort-RelativePortNumber-RelativePortNumber  
  INTEGER as sdslNetworkProfile-LineConfig-Activation  
  INTEGER as sdslNetworkProfile-LineConfig-DataSense  
  INTEGER as sdslNetworkProfile-LineConfig-SdslDataFormat  
  INTEGER as sdslNetworkProfile-LineConfig-DataRateMode  
  INTEGER as sdslNetworkProfile-LineConfig-MaxRate  
  INTEGER as sdslNetworkProfile-LineConfig-AutoBaseRate  
  INTEGER as sdslNetworkProfile-LineConfig-UnitType  
  INTEGER as sdslNetworkProfile-LineConfig-Enabled  
  INTEGER as sdslNetworkProfile-LineConfig-LineMode  
  INTEGER as sdslNetworkProfile-LineConfig-LoopBack  
  IpAddress as sdslNetworkProfile-DhcpConfig-IpAddress  
  INTEGER as sdslNetworkProfile-DhcpConfig-MaxLease  
  INTEGER as sdslNetworkProfile-Action-o