ASCEND-MIBSHDSLSTAT-MIB

File: ASCEND-MIBSHDSLSTAT-MIB.mib (18399 bytes)

Imported modules

ASCEND-MIB RFC1155-SMI RFC-1212

Imported symbols

configuration IpAddress OBJECT-TYPE

Defined Objects

mibshdslDslLineStatus 1.3.6.1.4.1.529.23.157
OBJECT IDENTIFIER    

mibshdslDslLineStatusTable 1.3.6.1.4.1.529.23.157.1
A list of mibshdslDslLineStatus profile entries.
OBJECT-TYPE    
  SEQUENCE OF  
    MibshdslDslLineStatusEntry

mibshdslDslLineStatusEntry 1.3.6.1.4.1.529.23.157.1.1
A mibshdslDslLineStatus entry containing objects that maps to the parameters of mibshdslDslLineStatus profile.
OBJECT-TYPE    
  MibshdslDslLineStatusEntry  

shdslDslLineStatus-Shelf-o 1.3.6.1.4.1.529.23.157.1.1.1
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-Slot-o 1.3.6.1.4.1.529.23.157.1.1.2
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-Item-o 1.3.6.1.4.1.529.23.157.1.1.3
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-PhysicalAddress-Shelf 1.3.6.1.4.1.529.23.157.1.1.4
The number of the shelf that the addressed physical device resides on.
OBJECT-TYPE    
  INTEGER anyShelf(1), shelf1(2), shelf2(3), shelf3(4), shelf4(5), shelf5(6), shelf6(7), shelf7(8), shelf8(9), shelf9(10)  

shdslDslLineStatus-PhysicalAddress-Slot 1.3.6.1.4.1.529.23.157.1.1.5
The number of the slot that the addressed physical device resides on.
OBJECT-TYPE    
  INTEGER anySlot(1), slot1(2), slot2(3), slot3(4), slot4(5), slot5(6), slot6(7), slot7(8), slot8(9), slot9(10), slot10(11), slot11(12), slot12(13), slot13(14), slot14(15), slot15(16), slot16(17), slot17(18), slot18(19), slot19(20), slot20(21), slot21(22), slot22(23), slot23(24), slot24(25), slot25(26), slot26(27), slot27(28), slot28(29), slot29(30), slot30(31), slot31(32), slot32(33), slot33(34), slot34(35), slot35(36), slot36(37), slot37(38), slot38(39), slot39(40), slot40(41), aLim(55), bLim(56), cLim(57), dLim(58), leftController(49), rightController(50), controller(42), firstControlModule(53), secondControlModule(54), trunkModule1(45), trunkModule2(46), controlModule(51), slotPrimary(59)  

shdslDslLineStatus-PhysicalAddress-ItemNumber 1.3.6.1.4.1.529.23.157.1.1.6
A number that specifies an addressable entity within the context of shelf and slot.
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-LineState 1.3.6.1.4.1.529.23.157.1.1.7
The overall state of the line.
OBJECT-TYPE    
  INTEGER doesNotExist(1), disabled(2), active(3)  

shdslDslLineStatus-SparePhysicalAddress-Shelf 1.3.6.1.4.1.529.23.157.1.1.8
The number of the shelf that the addressed physical device resides on.
OBJECT-TYPE    
  INTEGER anyShelf(1), shelf1(2), shelf2(3), shelf3(4), shelf4(5), shelf5(6), shelf6(7), shelf7(8), shelf8(9), shelf9(10)  

shdslDslLineStatus-SparePhysicalAddress-Slot 1.3.6.1.4.1.529.23.157.1.1.9
The number of the slot that the addressed physical device resides on.
OBJECT-TYPE    
  INTEGER anySlot(1), slot1(2), slot2(3), slot3(4), slot4(5), slot5(6), slot6(7), slot7(8), slot8(9), slot9(10), slot10(11), slot11(12), slot12(13), slot13(14), slot14(15), slot15(16), slot16(17), slot17(18), slot18(19), slot19(20), slot20(21), slot21(22), slot22(23), slot23(24), slot24(25), slot25(26), slot26(27), slot27(28), slot28(29), slot29(30), slot30(31), slot31(32), slot32(33), slot33(34), slot34(35), slot35(36), slot36(37), slot37(38), slot38(39), slot39(40), slot40(41), aLim(55), bLim(56), cLim(57), dLim(58), leftController(49), rightController(50), controller(42), firstControlModule(53), secondControlModule(54), trunkModule1(45), trunkModule2(46), controlModule(51), slotPrimary(59)  

shdslDslLineStatus-SparePhysicalAddress-ItemNumber 1.3.6.1.4.1.529.23.157.1.1.10
A number that specifies an addressable entity within the context of shelf and slot.
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-SparingState 1.3.6.1.4.1.529.23.157.1.1.11
The sparing state of the line.
OBJECT-TYPE    
  INTEGER sparingNone(1), primaryActive(2), primaryInactive(3), secondaryActive(4), secondaryInactive(5)  

shdslDslLineStatus-SparingChangeReason 1.3.6.1.4.1.529.23.157.1.1.12
The reson for the last sparing state change.
OBJECT-TYPE    
  INTEGER unknown(1), manual(2), automatic(3), test(4)  

shdslDslLineStatus-SparingChangeTime 1.3.6.1.4.1.529.23.157.1.1.13
The time of the last sparing state change.
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-SparingChangeCounter 1.3.6.1.4.1.529.23.157.1.1.14
The number of sparing state changes.
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-VpiVciRange 1.3.6.1.4.1.529.23.157.1.1.15
The valid range of vpi and vci for the circuits established for the line. This range can change only after LIM reboot.
OBJECT-TYPE    
  INTEGER vpi01Vci321023(6), vpi03Vci32511(1), vpi07Vci32255(2), vpi015Vci32127(3), vpi031Vci3263(4), notApplicable(5)  

shdslDslLineStatus-VpSwitchingVpi 1.3.6.1.4.1.529.23.157.1.1.16
VPI to be used for the VP switching. Rest of the VPIs will be used for the VC switching.
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-PhysicalStatus-IfGroupIndex 1.3.6.1.4.1.529.23.157.1.1.17
Interface groups index assigned to this physical port.
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-PhysicalStatus-UnitType 1.3.6.1.4.1.529.23.157.1.1.18
Unit types defines if the node is operating Central Office or Customer Premise equipment software.
OBJECT-TYPE    
  INTEGER coe(1), cpe(2)  

shdslDslLineStatus-PhysicalStatus-InterfaceType 1.3.6.1.4.1.529.23.157.1.1.19
Interface type defines if the node is operating on SHDSL or GSHDSL
OBJECT-TYPE    
  INTEGER default(1), gShdsl(2), hdsl2(3)  

shdslDslLineStatus-PhysicalStatus-DevLineState 1.3.6.1.4.1.529.23.157.1.1.20
Display of current interface state.
OBJECT-TYPE    
  INTEGER portUp(2), test(3), startupHandshake(4), startupTraining(5), startupDownload(6), idle(7), down(8), outOfService(9), unknown(10), analogLoopback(11), digitalLoopback(12)  

shdslDslLineStatus-PhysicalStatus-OperationalRate 1.3.6.1.4.1.529.23.157.1.1.21
Operational up and down stream rate. Zero means unknown.
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-PhysicalStatus-FirmwareVer 1.3.6.1.4.1.529.23.157.1.1.22
Firmware version ID.
OBJECT-TYPE    
  DisplayString  

shdslDslLineStatus-PhysicalStatus-HardwareVer 1.3.6.1.4.1.529.23.157.1.1.23
Hardware chip version.
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-PhysicalStatistic-LineUpTimer-Days 1.3.6.1.4.1.529.23.157.1.1.24
Number of days that the DSL line has been up.
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-PhysicalStatistic-LineUpTimer-Hours 1.3.6.1.4.1.529.23.157.1.1.25
Number of hours that the DSL line has been up.
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-PhysicalStatistic-LineUpTimer-Minutes 1.3.6.1.4.1.529.23.157.1.1.26
Number of minutes that the DSL line has been up.
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-PhysicalStatistic-RxSignalPresent 1.3.6.1.4.1.529.23.157.1.1.27
State if the receive signal is present or not.
OBJECT-TYPE    
  INTEGER yes(3), no(2)  

shdslDslLineStatus-PhysicalStatistic-LineQuality 1.3.6.1.4.1.529.23.157.1.1.28
While the port is in the up state, this parameter displays the line quality.
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-PhysicalStatistic-UpDwnCntr 1.3.6.1.4.1.529.23.157.1.1.29
Interface Up Down counter value displays the number of times the interface trasitions from a down to up state.
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-PhysicalStatistic-SelfTest 1.3.6.1.4.1.529.23.157.1.1.30
Hardware/firmware self test results.
OBJECT-TYPE    
  INTEGER passed(1), selfTestFailed(2), localLoopBackFailed(3)  

shdslDslLineStatus-PhysicalStatistic-TransmitPower 1.3.6.1.4.1.529.23.157.1.1.31
Transmit power in DB.
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-PhysicalStatistic-FramerSyncStatus 1.3.6.1.4.1.529.23.157.1.1.32
Framer sync status
OBJECT-TYPE    
  INTEGER inSync(2), outOfSync(1)  

shdslDslLineStatus-PhysicalStatistic-CodeViolations 1.3.6.1.4.1.529.23.157.1.1.33
Line is defined as a count of SHDSL CRC anomalies occuring during the accumuation period.
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-PhysicalStatistic-ErroredSecond 1.3.6.1.4.1.529.23.157.1.1.34
Errored second is defined as a count of 1 second intervals during which one or more CRC anomalies are declaired and/or one or more LOSW defects are declared.
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-PhysicalStatistic-SeverelyErroredSecond 1.3.6.1.4.1.529.23.157.1.1.35
Line is defined as a count of 1 second intervals for during which at least 50 CRC anomalies are declared or one or more LOSW defects are declared.
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-PhysicalStatistic-LoswSecond 1.3.6.1.4.1.529.23.157.1.1.36
Line is defined as a count of 1 second intervals during which one or more SHDSL LOSW defects are declared.
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-PhysicalStatistic-UnavailableSecond 1.3.6.1.4.1.529.23.157.1.1.37
Line is a count of 1 second intervals for which the SHDSL line is unavailable. The SHDSL line becomes unavailable at the onset of 10 contiguous SES-L's. Once unavailable the SHDSL line becomes available at the onset of 10 contiguous seconds with no SES-L's.
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-PhysicalStatistic-LoopAttenuation 1.3.6.1.4.1.529.23.157.1.1.38
Current loop attenuation in DB.
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-Action-o 1.3.6.1.4.1.529.23.157.1.1.39
OBJECT-TYPE    
  INTEGER noAction(1), createProfile(2), deleteProfile(3)  

shdslDslLineStatus-PhysicalStatistic-Snr 1.3.6.1.4.1.529.23.157.1.1.40
While the port is in the up state, this parameter displays the Signal to Noise Ratio.
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-PhysicalStatistic-SturLoopAttenuation 1.3.6.1.4.1.529.23.157.1.1.41
Current loop attenuation in DB from the STU-R.
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-PhysicalStatistic-SturSnr 1.3.6.1.4.1.529.23.157.1.1.42
While the port is in the up state, this parameter displays the Signal to Noise Ratio from the STU-R.
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-PhysicalStatus-NetworkType 1.3.6.1.4.1.529.23.157.1.1.43
Current Standard Network type. Either Annex A, Annex B or Annex B ANFP.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

Defined Objects

DisplayString  
OCTET STRING    

MibshdslDslLineStatusEntry  
SEQUENCE    
  INTEGER as shdslDslLineStatus-Shelf-o  
  INTEGER as shdslDslLineStatus-Slot-o  
  INTEGER as shdslDslLineStatus-Item-o  
  INTEGER as shdslDslLineStatus-PhysicalAddress-Shelf  
  INTEGER as shdslDslLineStatus-PhysicalAddress-Slot  
  INTEGER as shdslDslLineStatus-PhysicalAddress-ItemNumber  
  INTEGER as shdslDslLineStatus-LineState  
  INTEGER as shdslDslLineStatus-SparePhysicalAddress-Shelf  
  INTEGER as shdslDslLineStatus-SparePhysicalAddress-Slot  
  INTEGER as shdslDslLineStatus-SparePhysicalAddress-ItemNumber  
  INTEGER as shdslDslLineStatus-SparingState  
  INTEGER as shdslDslLineStatus-SparingChangeReason  
  INTEGER as shdslDslLineStatus-SparingChangeTime  
  INTEGER as shdslDslLineStatus-SparingChangeCounter  
  INTEGER as shdslDslLineStatus-VpiVciRange  
  INTEGER as shdslDslLineStatus-VpSwitchingVpi  
  INTEGER as shdslDslLineStatus-PhysicalStatus-IfGroupIndex  
  INTEGER as shdslDslLineStatus-PhysicalStatus-UnitType  
  INTEGER as shdslDslLineStatus-PhysicalStatus-InterfaceType  
  INTEGER as shdslDslLineStatus-PhysicalStatus-DevLineState  
  INTEGER as shdslDslLineStatus-PhysicalStatus-OperationalRate  
  DisplayString as shdslDslLineStatus-PhysicalStatus-FirmwareVer  
  INTEGER as shdslDslLineStatus-PhysicalStatus-HardwareVer  
  INTEGER as shdslDslLineStatus-PhysicalStatus-NetworkType  
  INTEGER as shdslDslLineStatus-PhysicalStatistic-LineUpTimer-Days  
  INTEGER as shdslDslLineStatus-PhysicalStatistic-LineUpTimer-Hours  
  INTEGER as shdslDslLineStatus-PhysicalStatistic-LineUpTimer-Minutes  
  INTEGER as shdslDslLineStatus-PhysicalStatistic-RxSignalPresent  
  INTEGER as shdslDslLineStatus-PhysicalStatistic-LineQuality  
  INTEGER as shdslDslLineStatus-PhysicalStatistic-UpDwnCntr  
  INTEGER as shdslDslLineStatus-PhysicalStatistic-SelfTest  
  INTEGER as shdslDslLineStatus-PhysicalStatistic-TransmitPower  
  INTEGER as shdslDslLineStatus-PhysicalStatistic-FramerSyncStatus  
  INTEGER as shdslDslLineStatus-PhysicalStatistic-CodeViolations  
  INTEGER as shdslDslLineStatus-PhysicalStatistic-ErroredSecond  
  INTEGER as shdslDslLineStatus-PhysicalStatistic-SeverelyErroredSecond  
  INTEGER as shdslDslLineStatus-PhysicalStatistic-LoswSecond  
  INTEGER as shdslDslLineStatus-PhysicalStatistic-UnavailableSecond  
  INTEGER as shdslDslLineStatus-PhysicalStatistic-LoopAttenuation  
  INTEGER as shdslDslLineStatus-PhysicalStatistic-Snr  
  INTEGER as shdslDslLineStatus-PhysicalStatistic-SturLoopAttenuation  
  INTEGER as shdslDslLineStatus-PhysicalStatistic-SturSnr  
  INTEGER as shdslDslLineStatus-Action-o