ASCEND-MIBT1NET-MIB

File: ASCEND-MIBT1NET-MIB.mib (97312 bytes)

Imported modules

ASCEND-MIB RFC1155-SMI RFC-1212

Imported symbols

configuration IpAddress OBJECT-TYPE

Defined Objects

mibt1NetworkProfileV1 1.3.6.1.4.1.529.23.126
OBJECT IDENTIFIER    

mibt1NetworkProfileV1Table 1.3.6.1.4.1.529.23.126.1
A list of mibt1NetworkProfile_v1 profile entries.
OBJECT-TYPE    
  SEQUENCE OF  
    Mibt1NetworkProfileV1Entry

mibt1NetworkProfileV1Entry 1.3.6.1.4.1.529.23.126.1.1
A mibt1NetworkProfile_v1 entry containing objects that maps to the parameters of mibt1NetworkProfile_v1 profile.
OBJECT-TYPE    
  Mibt1NetworkProfileV1Entry  

t1NetworkProfileV1-ProfileNumber 1.3.6.1.4.1.529.23.126.1.1.1
For potential backwards compatibility. The current design consists of one line profile numbered 0.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-Name 1.3.6.1.4.1.529.23.126.1.1.2
Name of DS1 line.
OBJECT-TYPE    
  DisplayString  

t1NetworkProfileV1-PhysicalAddress-Shelf 1.3.6.1.4.1.529.23.126.1.1.3
The number of the shelf that the addressed physical device resides on.
OBJECT-TYPE    
  INTEGER anyShelf(1), shelf1(2), shelf2(3), shelf3(4), shelf4(5), shelf5(6), shelf6(7), shelf7(8), shelf8(9), shelf9(10)  

t1NetworkProfileV1-PhysicalAddress-Slot 1.3.6.1.4.1.529.23.126.1.1.4
The number of the slot that the addressed physical device resides on.
OBJECT-TYPE    
  INTEGER anySlot(1), slot1(2), slot2(3), slot3(4), slot4(5), slot5(6), slot6(7), slot7(8), slot8(9), slot9(10), slot10(11), slot11(12), slot12(13), slot13(14), slot14(15), slot15(16), slot16(17), slot17(18), slot18(19), slot19(20), slot20(21), slot21(22), slot22(23), slot23(24), slot24(25), slot25(26), slot26(27), slot27(28), slot28(29), slot29(30), slot30(31), slot31(32), slot32(33), slot33(34), slot34(35), slot35(36), slot36(37), slot37(38), slot38(39), slot39(40), slot40(41), aLim(55), bLim(56), cLim(57), dLim(58), leftController(49), rightController(50), controller(42), firstControlModule(53), secondControlModule(54), trunkModule1(45), trunkModule2(46), controlModule(51), slotPrimary(59)  

t1NetworkProfileV1-PhysicalAddress-ItemNumber 1.3.6.1.4.1.529.23.126.1.1.5
A number that specifies an addressable entity within the context of shelf and slot.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-BackToBack 1.3.6.1.4.1.529.23.126.1.1.6
Indicates whether the Multiband is connected back-to-back to another Muliband, rather than a DPNSS PBX. If this field is TRUE, than we don't need to disable receiving interrupts when too many are coming in beyond our processing power. NOTE: GPT's iSDX keeps re-transmitting a frame at 8 ms intervals until it receives an acknowledgement.
OBJECT-TYPE    
  INTEGER false(1), true(2)  

t1NetworkProfileV1-PrimaryChannelUsage 1.3.6.1.4.1.529.23.126.1.1.7
This is the use of the first T1 interface.
OBJECT-TYPE    
  INTEGER lineUnavailable(1), lineDisable(2), t1LineQuiesce(3), dropAndInsert(4), dualNetworkInterface(5), tOnlineUsrInterface(6), tOnlineZgrInterface(7)  

t1NetworkProfileV1-SecondaryChannelUsage 1.3.6.1.4.1.529.23.126.1.1.8
The Multiband uses the first T1 interface as the primary interface and treats the secondary interface special. This is the use of the second interface.
OBJECT-TYPE    
  INTEGER lineUnavailable(1), lineDisable(2), t1LineQuiesce(3), dropAndInsert(4), dualNetworkInterface(5), tOnlineUsrInterface(6), tOnlineZgrInterface(7)  

t1NetworkProfileV1-TertiaryChannelUsage 1.3.6.1.4.1.529.23.126.1.1.9
This is the use of the 3rd T1 interface.
OBJECT-TYPE    
  INTEGER lineUnavailable(1), lineDisable(2), t1LineQuiesce(3), dropAndInsert(4), dualNetworkInterface(5), tOnlineUsrInterface(6), tOnlineZgrInterface(7)  

t1NetworkProfileV1-Action-o 1.3.6.1.4.1.529.23.126.1.1.10
OBJECT-TYPE    
  INTEGER noAction(1), createProfile(2), deleteProfile(3)  

mibt1NetworkProfileV1-LineInterfaceTable 1.3.6.1.4.1.529.23.126.2
A list of mibt1NetworkProfile_v1__line_interface profile entries.
OBJECT-TYPE    
  SEQUENCE OF  
    Mibt1NetworkProfileV1-LineInterfaceEntry

mibt1NetworkProfileV1-LineInterfaceEntry 1.3.6.1.4.1.529.23.126.2.1
A mibt1NetworkProfile_v1__line_interface entry containing objects that maps to the parameters of mibt1NetworkProfile_v1__line_interface profile.
OBJECT-TYPE    
  Mibt1NetworkProfileV1-LineInterfaceEntry  

t1NetworkProfileV1-LineInterface-Name 1.3.6.1.4.1.529.23.126.2.1.1
OBJECT-TYPE    
  DisplayString  

t1NetworkProfileV1-LineInterface-Index-o 1.3.6.1.4.1.529.23.126.2.1.2
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-Enabled 1.3.6.1.4.1.529.23.126.2.1.3
TRUE if the line is enabled, otherwise FALSE.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

t1NetworkProfileV1-LineInterface-TOnlineType 1.3.6.1.4.1.529.23.126.2.1.4
The tonline type of an e1 line.
OBJECT-TYPE    
  INTEGER none(1), nt(2), te(3), numberOfTonline(4)  

t1NetworkProfileV1-LineInterface-FrameType 1.3.6.1.4.1.529.23.126.2.1.5
The super-framing mode that is used on the physical link(s).
OBJECT-TYPE    
  INTEGER d4(1), esf(2), g703(3), n-2ds(4)  

t1NetworkProfileV1-LineInterface-Encoding 1.3.6.1.4.1.529.23.126.2.1.6
The layer 1 line encoding used for the physical link(s).
OBJECT-TYPE    
  INTEGER ami(1), b8zs(2), hdb3(3), none(4)  

t1NetworkProfileV1-LineInterface-ClockSource 1.3.6.1.4.1.529.23.126.2.1.7
OBJECT-TYPE    
  INTEGER eligible(1), notEligible(2)  

t1NetworkProfileV1-LineInterface-ClockPriority 1.3.6.1.4.1.529.23.126.2.1.8
Clock priority assigned to the T1 line. Used to select particular lines as clock source.
OBJECT-TYPE    
  INTEGER highPriority(2), middlePriority(3), lowPriority(4)  

t1NetworkProfileV1-LineInterface-SignalingMode 1.3.6.1.4.1.529.23.126.2.1.9
Inband, ISDN, ISDN_NFAS, PBX or SS7 signaling.
OBJECT-TYPE    
  INTEGER inband(1), isdn(2), isdnNfas(3), e1R2Signaling(5), e1KoreanSignaling(6), e1P7Signaling(7), e1ChineseSignaling(8), e1MeteredSignaling(9), e1NoSignaling(10), e1DpnssSignaling(11), e1ArgentinaSignaling(13), e1BrazilSignaling(14), e1PhilippineSignaling(15), e1IndianSignaling(16), e1CzechSignaling(17), e1MalaysiaSignaling(19), e1NewZealandSignaling(20), e1IsraelSignaling(21), e1ThailandSignaling(22), e1KuwaitSignaling(23), e1MexicoSignaling(24), dtmfR2Signaling(25), tunneledPriSignaling(27), inbandFgdInFgdOut(28), inbandFgdInFgcOut(29), inbandFgcInFgcOut(30), inbandFgcInFgdOut(31), e1VietnamSignaling(32), ss7SigTrunk(33), h248DataTrunk(34)  

t1NetworkProfileV1-LineInterface-IsdnEmulationSide 1.3.6.1.4.1.529.23.126.2.1.10
Side the line will emulate: TE (user), or NT (network).
OBJECT-TYPE    
  INTEGER te(1), nt(2)  

t1NetworkProfileV1-LineInterface-RobbedBitMode 1.3.6.1.4.1.529.23.126.2.1.11
Wink start, idle start, incoming wink.
OBJECT-TYPE    
  INTEGER winkStart(1), idleStart(2), incW200(3), incW400(4), loopStart(5), groundStart(6)  

t1NetworkProfileV1-LineInterface-DefaultCallType 1.3.6.1.4.1.529.23.126.2.1.12
Specify the default call-type for incoming calls, for purposes of call routing and signalling.
OBJECT-TYPE    
  INTEGER digital(1), voice(2), dnisOrVoice(3), dnisOrDigital(4), voip(5), dnisOrVoip(6)  

t1NetworkProfileV1-LineInterface-SwitchType 1.3.6.1.4.1.529.23.126.2.1.13
The network switch type, needed for ISDN/NFAS signaling.
OBJECT-TYPE    
  INTEGER attPri(1), ntiPri(2), globandPri(3), japanPri(4), vn3Pri(5), onetr6Pri(6), net5Pri(7), danishPri(8), australPri(9), natIsdn2Pri(10), taiwanPri(31), isdxDpnss(11), islxDpnss(12), mercuryDpnss(13), dass2(14), btSs7(32), unknownBri(15), att5essBri(16), dms100Nt1Bri(17), nisdn1Bri(18), vn2Bri(19), btnr191Bri(20), net3Bri(21), ptpNet3Bri(22), kddBri(23), belgianBri(24), australBri(25), swissBri(26), german1tr6Bri(27), dutch1tr6Bri(28), switchCas(29), idslPtpBri(30)  

t1NetworkProfileV1-LineInterface-NfasGroupId 1.3.6.1.4.1.529.23.126.2.1.14
For NFAS lines: the nfas group id. Not used with robbed bit signaling.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-NfasId 1.3.6.1.4.1.529.23.126.2.1.15
For NFAS lines: the interface id. For SS7 lines when Q.931+ control protocol is used: interface id. Not used with robbed bit signaling.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-IncomingCallHandling 1.3.6.1.4.1.529.23.126.2.1.16
This parameter is used to determine the type of processing required for incoming calls from this line.
OBJECT-TYPE    
  INTEGER rejectAll(1), internalProcessing(2), ss7GatewayProcessing(3)  

t1NetworkProfileV1-LineInterface-DeleteDigits 1.3.6.1.4.1.529.23.126.2.1.17
Number of digits to delete from numbers received from a PBX.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-AddDigitString 1.3.6.1.4.1.529.23.126.2.1.18
String of digits to prepend to phone number received from PBX.
OBJECT-TYPE    
  DisplayString  

t1NetworkProfileV1-LineInterface-CallByCall 1.3.6.1.4.1.529.23.126.2.1.19
Call-by-call value to set when routing calls from PBX to network.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-PbxAnswerNumber 1.3.6.1.4.1.529.23.126.2.1.20
The answer number that is the equivalent of a port answer-number used for the network to pbx routing.
OBJECT-TYPE    
  DisplayString  

t1NetworkProfileV1-LineInterface-AnswerService 1.3.6.1.4.1.529.23.126.2.1.21
The switched service type (or none) that is used for routing network calls to the pbx.
OBJECT-TYPE    
  INTEGER voice(1), n-56kRestricted(2), n-64kClear(3), n-64kRestricted(4), n-56kClear(5), n-384kRestricted(6), n-384kClear(7), n-1536kClear(8), n-1536kRestricted(9), n-128kClear(10), n-192kClear(11), n-256kClear(12), n-320kClear(13), dws384Clear(14), n-448Clear(15), n-512Clear(16), n-576Clear(17), n-640Clear(18), n-704Clear(19), n-768Clear(20), n-832Clear(21), n-896Clear(22), n-960Clear(23), n-1024Clear(24), n-1088Clear(25), n-1152Clear(26), n-1216Clear(27), n-1280Clear(28), n-1344Clear(29), n-1408Clear(30), n-1472Clear(31), n-1600Clear(32), n-1664Clear(33), n-1728Clear(34), n-1792Clear(35), n-1856Clear(36), n-1920Clear(37), x30RestrictedBearer(39), v110ClearBearer(40), n-64kX30Restricted(41), n-56kV110Clear(42), modem(43), atmodem(44), n-2456kV110(46), n-4856kV110(47), n-9656kV110(48), n-19256kV110(49), n-38456kV110(50), n-2456krV110(51), n-4856krV110(52), n-9656krV110(53), n-19256krV110(54), n-38456krV110(55), n-2464kV110(56), n-4864kV110(57), n-9664kV110(58), n-19264kV110(59), n-38464kV110(60), n-2464krV110(61), n-4864krV110(62), n-9664krV110(63), n-19264krV110(64), n-38464krV110(65), v32(66), phs64k(67), voiceOverIp(68), atmSvc(70), frameRelaySvc(71), vpnTunnel(72), wormarq(73), n-14456kV110(74), n-28856kV110(75), n-14456krV110(76), n-28856krV110(77), n-14464kV110(78), n-28864kV110(79), n-14464krV110(80), n-28864krV110(81), modem31khzAudio(82), x25Svc(83), n-144kClear(255), iptoip(263)  

t1NetworkProfileV1-LineInterface-oPBXType 1.3.6.1.4.1.529.23.126.2.1.22
The PBX Class as defined in the enumeration above.
OBJECT-TYPE    
  INTEGER hostPbxVoice(1), hostPbxData(2), hostPbxLeasedData(3), hostPbxLeased11(4)  

t1NetworkProfileV1-LineInterface-DataSense 1.3.6.1.4.1.529.23.126.2.1.23
D-channel normal or inverted data. Currently unused (normal data is always selected.
OBJECT-TYPE    
  INTEGER normal(1), inv(2)  

t1NetworkProfileV1-LineInterface-IdleMode 1.3.6.1.4.1.529.23.126.2.1.24
D-channel mark or flag idle. Currently unused (flag idle is always selected.
OBJECT-TYPE    
  INTEGER markIdle(1), flagIdle(2)  

t1NetworkProfileV1-LineInterface-oFDL 1.3.6.1.4.1.529.23.126.2.1.25
Who's FDL are we using. Used only if frame-type is ESF - Ignored otherwise.
OBJECT-TYPE    
  INTEGER none(1), atNT(2), ansi(3), sprint(4)  

t1NetworkProfileV1-LineInterface-FrontEndType 1.3.6.1.4.1.529.23.126.2.1.26
The front end type (CSU/DSX) of the T1 transceiver.
OBJECT-TYPE    
  INTEGER csu(1), dsx(2)  

t1NetworkProfileV1-LineInterface-oDSXLineLength 1.3.6.1.4.1.529.23.126.2.1.27
The length of the physical T1 line (for DSX lines).
OBJECT-TYPE    
  INTEGER n-1133(1), n-134266(2), n-267399(3), n-400533(4), n-534655(5)  

t1NetworkProfileV1-LineInterface-oCSUBuildOut 1.3.6.1.4.1.529.23.126.2.1.28
Line buildout value for CSU lines.
OBJECT-TYPE    
  INTEGER n-0Db(1), n-75Db(2), n-15Db(3), n-2255Db(4)  

t1NetworkProfileV1-LineInterface-OverlapReceiving 1.3.6.1.4.1.529.23.126.2.1.29
TRUE if overlap receiving procedure may be used to handle incoming call, FALSE if not
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

t1NetworkProfileV1-LineInterface-PriPrefixNumber 1.3.6.1.4.1.529.23.126.2.1.30
The unique prefix of the PRI called party number. It is used to determine whether SETUP message contains any trailing digits when overlap receiving procedure is used to handle the incoming call. Defaults to '' to not count the trailing digits.
OBJECT-TYPE    
  DisplayString  

t1NetworkProfileV1-LineInterface-TrailingDigits 1.3.6.1.4.1.529.23.126.2.1.31
Number of trailing digits expected from the called party number information elements of INFORMATION messages when overlap receiving procedure is used to handle the incoming call. SETUP message may contain some trailing digits in the called party number information element. Defaults to 2.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-T302Timer 1.3.6.1.4.1.529.23.126.2.1.32
Number of milliseconds to wait for additional called number information elements for an incoming call using overlap receiving procedure. Defaults to 10000.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-Layer3End 1.3.6.1.4.1.529.23.126.2.1.33
If x-side, layer 3 favors outgoing call when a call collision occurs.
OBJECT-TYPE    
  INTEGER false(1), true(2)  

t1NetworkProfileV1-LineInterface-Layer2End 1.3.6.1.4.1.529.23.126.2.1.34
This parameter is used to determine the address to send when two PBXs are connected back-to-back; one side must act as an ET, and the other side acts as a PBX. If a-side, layer 2 acts as ET.
OBJECT-TYPE    
  INTEGER false(1), true(2)  

t1NetworkProfileV1-LineInterface-NlValue 1.3.6.1.4.1.529.23.126.2.1.35
Number of re-transmissions; default to 64.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-LoopAvoidance 1.3.6.1.4.1.529.23.126.2.1.36
Loop Avoidance; the number of transit PBXs through which a call may be routed (1 to 26 default 7).
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-MaintenanceState 1.3.6.1.4.1.529.23.126.2.1.37
TRUE if the line is in user-requested maintenance mode, otherwise FALSE.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

t1NetworkProfileV1-LineInterface-NumberComplete 1.3.6.1.4.1.529.23.126.2.1.38
The criteria for having received enough digits on an incoming R2 call. Can either be 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 13, 14, or 15 digits received, or the end-of-pulsing signal received, or time-out.
OBJECT-TYPE    
  INTEGER n-1Digits(1), n-2Digits(2), n-3Digits(3), n-4Digits(4), n-5Digits(5), n-6Digits(6), n-7Digits(7), n-8Digits(8), n-9Digits(9), n-10Digits(10), endOfPulsing(11), n-0Digits(12), n-11Digits(13), n-12Digits(14), n-13Digits(15), n-14Digits(16), n-15Digits(17), timeOut(18)  

t1NetworkProfileV1-LineInterface-GroupBAnswerSignal 1.3.6.1.4.1.529.23.126.2.1.39
The group B signal to send prior to answering a call.
OBJECT-TYPE    
  INTEGER signalB1(1), signalB2(2), signalB3(3), signalB4(4), signalB5(5), signalB6(6), signalB7(7), signalB8(8), signalB9(9), signalB10(10), signalB11(11), signalB12(12), signalB13(13), signalB14(14), signalB15(15)  

t1NetworkProfileV1-LineInterface-GroupBBusySignal 1.3.6.1.4.1.529.23.126.2.1.40
The group B signal to send to reject a call.
OBJECT-TYPE    
  INTEGER signalB1(1), signalB2(2), signalB3(3), signalB4(4), signalB5(5), signalB6(6), signalB7(7), signalB8(8), signalB9(9), signalB10(10), signalB11(11), signalB12(12), signalB13(13), signalB14(14), signalB15(15)  

t1NetworkProfileV1-LineInterface-GroupBNoMatchSignal 1.3.6.1.4.1.529.23.126.2.1.41
The group B signal to send to reject a call with invalid call number.
OBJECT-TYPE    
  INTEGER signalB1(1), signalB2(2), signalB3(3), signalB4(4), signalB5(5), signalB6(6), signalB7(7), signalB8(8), signalB9(9), signalB10(10), signalB11(11), signalB12(12), signalB13(13), signalB14(14), signalB15(15)  

t1NetworkProfileV1-LineInterface-GroupBCollectSignal 1.3.6.1.4.1.529.23.126.2.1.42
The group B signal to send to answer/reject a collect call.
OBJECT-TYPE    
  INTEGER signalB1(1), signalB2(2), signalB3(3), signalB4(4), signalB5(5), signalB6(6), signalB7(7), signalB8(8), signalB9(9), signalB10(10), signalB11(11), signalB12(12), signalB13(13), signalB14(14), signalB15(15)  

t1NetworkProfileV1-LineInterface-GroupIiSignal 1.3.6.1.4.1.529.23.126.2.1.43
The group II signal to send after sending all address digits.
OBJECT-TYPE    
  INTEGER signalIi1(1), signalIi2(2), signalIi3(3), signalIi4(4), signalIi5(5), signalIi6(6), signalIi7(7), signalIi8(8), signalIi9(9), signalIi10(10), signalIi11(11), signalIi12(12), signalIi13(13), signalIi14(14), signalIi15(15)  

t1NetworkProfileV1-LineInterface-InputSampleCount 1.3.6.1.4.1.529.23.126.2.1.44
The number of Goertzel input samples (each Goertzel sample is of length N=205) to compute in order to decode DTMF tones, the more samples, the more acccurate the detection result
OBJECT-TYPE    
  INTEGER oneSample(1), twoSamples(2)  

t1NetworkProfileV1-LineInterface-AnswerDelay 1.3.6.1.4.1.529.23.126.2.1.45
Number of milliseconds to wait before answering an incoming R2 call.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-CallerId 1.3.6.1.4.1.529.23.126.2.1.46
TRUE if the caller Id is enabled, otherwise FALSE.
OBJECT-TYPE    
  INTEGER noCallerId(1), getCallerId(2)  

t1NetworkProfileV1-LineInterface-LineSignaling 1.3.6.1.4.1.529.23.126.2.1.47
The line signaling of E1 line.
OBJECT-TYPE    
  INTEGER abBitsLineSignaling(1), aBitOnly0EqualBBit(2), aBitOnly1EqualBBit(3)  

t1NetworkProfileV1-LineInterface-Timer1CollectCall 1.3.6.1.4.1.529.23.126.2.1.48
Adjustable between 0 ~ 2000ms
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-Timer2CollectCall 1.3.6.1.4.1.529.23.126.2.1.49
Adjustable between 10 ~ 2000ms
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-SendDiscVal 1.3.6.1.4.1.529.23.126.2.1.50
Number of seconds before sending ISDN disconnect to switch. 0 means disable.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-HuntGrpPhoneNumber1 1.3.6.1.4.1.529.23.126.2.1.51
The hunt group phone number associated with this line. Manually entered field which is read-write accessible via SNMP.
OBJECT-TYPE    
  DisplayString  

t1NetworkProfileV1-LineInterface-HuntGrpPhoneNumber2 1.3.6.1.4.1.529.23.126.2.1.52
The hunt group phone number associated with this line. Manually entered field which is read-write accessible via SNMP.
OBJECT-TYPE    
  DisplayString  

t1NetworkProfileV1-LineInterface-HuntGrpPhoneNumber3 1.3.6.1.4.1.529.23.126.2.1.53
The hunt group phone number associated with this line. Manually entered field which is read-write accessible via SNMP.
OBJECT-TYPE    
  DisplayString  

t1NetworkProfileV1-LineInterface-PriTypeOfNumber 1.3.6.1.4.1.529.23.126.2.1.54
PRI Called Party element's Type-Of-Number value for outgoing T1-to-PRI calls.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-PriNumberingPlanId 1.3.6.1.4.1.529.23.126.2.1.55
PRI Called Party element's Numbering-Plan-ID value for outgoing T1-to-PRI calls.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-SuperFrameSrcLineNumber 1.3.6.1.4.1.529.23.126.2.1.56
The line from which the the Super-Frame sync pulse is taken. Needed by the 'Dropped&Inserted' line so that it can become synchronized to the source line.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-CollectIncomingDigits 1.3.6.1.4.1.529.23.126.2.1.57
TRUE collect incoming called/calling digits, otherwise FALSE.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

t1NetworkProfileV1-LineInterface-T1InterDigitTimeout 1.3.6.1.4.1.529.23.126.2.1.58
Inter-Digit Timeout (in milliseconds) for inband T1 and E1 R2 lines.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-R1UseAnir 1.3.6.1.4.1.529.23.126.2.1.59
TRUE if the line is to use R1 signaling ANIR (CLID), otherwise FALSE.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

t1NetworkProfileV1-LineInterface-R1FirstDigitTimer 1.3.6.1.4.1.529.23.126.2.1.60
The timer between sending KPA and receiving first Digit in R1 signaling in milliseconds.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-R1AnirDelay 1.3.6.1.4.1.529.23.126.2.1.61
Delay in milliseconds between receiving ST and sending ANIR signal.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-R1AnirTimer 1.3.6.1.4.1.529.23.126.2.1.62
Time in milliseconds of ANIR signal.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-R1Modified 1.3.6.1.4.1.529.23.126.2.1.63
Use R1 modified signaling. Default is FALSE.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

t1NetworkProfileV1-LineInterface-FirstDs0 1.3.6.1.4.1.529.23.126.2.1.64
When using fractional T1/E1 the first DS0 used. Default is 1
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-LastDs0 1.3.6.1.4.1.529.23.126.2.1.65
When using fractional T1/E1 the last DS0 used. Default is 24
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-NailedGroup 1.3.6.1.4.1.529.23.126.2.1.66
A number that identifies the set of lines that makes up a nailed group. 0 means this line is not part of a nailed group.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-Ss7Continuity-IncomingProcedure 1.3.6.1.4.1.529.23.126.2.1.67
Procedure used for incoming continuity check on this line.
OBJECT-TYPE    
  INTEGER loopback(2), transponder(3)  

t1NetworkProfileV1-LineInterface-Ss7Continuity-OutgoingProcedure 1.3.6.1.4.1.529.23.126.2.1.68
Procedure used for outgoing continuity check on this line.
OBJECT-TYPE    
  INTEGER singleTone2010(2), send2010Expect1780(3), send1780Expect2010(4), singleTone2000(5), send2000Expect1780(6), send1780Expect2000(7)  

t1NetworkProfileV1-LineInterface-LineProvision 1.3.6.1.4.1.529.23.126.2.1.69
Line Provision.
OBJECT-TYPE    
  INTEGER lineProvisionNone(1), lineProvisionH0(2), lineProvisionH11(3), lineProvisionH0H11(4), lineProvisionH12(5), lineProvisionH0H12(6), lineProvisionH11H12(7), lineProvisionH0H11H12(8)  

t1NetworkProfileV1-LineInterface-Gr303Mode 1.3.6.1.4.1.529.23.126.2.1.70
GR-303 Mode.
OBJECT-TYPE    
  INTEGER gr303Disabled(1), gr3035essPri(2), gr303DmsPri(3), gr303Secondary(4), gr303Normal(5)  

t1NetworkProfileV1-LineInterface-Gr303GroupId 1.3.6.1.4.1.529.23.126.2.1.71
For GR303 lines: the interface group id.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-Gr303Ds1Id 1.3.6.1.4.1.529.23.126.2.1.72
For GR303 lines: The logical DS1 id.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-SwitchVersion 1.3.6.1.4.1.529.23.126.2.1.73
Switch Version.
OBJECT-TYPE    
  INTEGER switchVersionGeneric(1), switchVersionDefinityG3v4(2)  

t1NetworkProfileV1-LineInterface-GroupBNoChargeSignal 1.3.6.1.4.1.529.23.126.2.1.74
The group B signal to send if subscriber line is idle / no charge
OBJECT-TYPE    
  INTEGER signalB1(1), signalB2(2), signalB3(3), signalB4(4), signalB5(5), signalB6(6), signalB7(7), signalB8(8), signalB9(9), signalB10(10), signalB11(11), signalB12(12), signalB13(13), signalB14(14), signalB15(15)  

t1NetworkProfileV1-LineInterface-StatusChangeTrapEnable 1.3.6.1.4.1.529.23.126.2.1.75
When set to yes, a line status change trap is sent. NOTE: when the line status change results from a higher level line status change, i.e., ds3, then no trap for the ds1 are sent. The default setting is No.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

t1NetworkProfileV1-LineInterface-DownTransDelay 1.3.6.1.4.1.529.23.126.2.1.76
To control the delay in line state transition from up to down when loss of carrier is detected. Each unit of this value is equal to .1 seconds of Delay in UP to DOWN transition.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-UpTransDelay 1.3.6.1.4.1.529.23.126.2.1.77
To control the delay in line state transition from down to up when carrier is detected. Each unit of this value is equal to .1 seconds of Delay in DOWN to UP transition.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-NetworkSpecificFacilities 1.3.6.1.4.1.529.23.126.2.1.79
Network Specific Facilities (NSF) value to store in the NSF IE of the outgoing Q.931 Setup message. This sets the full 8 bits of the IE.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-CauseCodeVerificationEnable 1.3.6.1.4.1.529.23.126.2.1.80
When set to yes, the received CAUSE value will be verified to ensure that cause is defined for the configured switch type. If the switch does not support the cause code, then INVALID ELEM CONTENTS (Cause value 100) will be used for generating PSTN Q931 response. When set to no, the received CAUSE value will be used to generate the PSTN Q931 response.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

mibt1NetworkProfileV1-LineInterface-ChannelConfigTable 1.3.6.1.4.1.529.23.126.3
A list of mibt1NetworkProfile_v1__line_interface__channel_config profile entries.
OBJECT-TYPE    
  SEQUENCE OF  
    Mibt1NetworkProfileV1-LineInterface-ChannelConfigEntry

mibt1NetworkProfileV1-LineInterface-ChannelConfigEntry 1.3.6.1.4.1.529.23.126.3.1
A mibt1NetworkProfile_v1__line_interface__channel_config entry containing objects that maps to the parameters of mibt1NetworkProfile_v1__line_interface__channel_config profile.
OBJECT-TYPE    
  Mibt1NetworkProfileV1-LineInterface-ChannelConfigEntry  

t1NetworkProfileV1-LineInterface-ChannelConfig-Name 1.3.6.1.4.1.529.23.126.3.1.1
OBJECT-TYPE    
  DisplayString  

t1NetworkProfileV1-LineInterface-ChannelConfig-Index-o 1.3.6.1.4.1.529.23.126.3.1.2
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-ChannelConfig-Index1-o 1.3.6.1.4.1.529.23.126.3.1.3
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-ChannelConfig-ChannelUsage 1.3.6.1.4.1.529.23.126.3.1.4
The usage for this specific channel. May be different than the usage for the line, e.g. a nailed channel (clear 64) in a line otherwise used for switched calls.
OBJECT-TYPE    
  INTEGER unusedChannel(1), switchedChannel(2), nailed64Channel(3), dChannel(4), nfasPrimaryDChannel(5), nfasSecondaryDChannel(6), semiPermChannel(7), ss7SignalingChannel(8)  

t1NetworkProfileV1-LineInterface-ChannelConfig-TrunkGroup 1.3.6.1.4.1.529.23.126.3.1.5
The trunk group assigned to this channel.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-ChannelConfig-PhoneNumber 1.3.6.1.4.1.529.23.126.3.1.6
The phone number of this channel. This is the number sent to the far end in an inverse multiplexed call when instructing the far end to add more bandwidth. The number should contain the minimum number of digits to identify the channel. If the channel is part of a hunt group, the phone number should be blank.
OBJECT-TYPE    
  DisplayString  

t1NetworkProfileV1-LineInterface-ChannelConfig-RoutePort-SlotNumber-SlotNumber 1.3.6.1.4.1.529.23.126.3.1.7
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-ChannelConfig-RoutePort-SlotNumber-ShelfNumber 1.3.6.1.4.1.529.23.126.3.1.8
TNT is a multi shelf system. To minimise the changes required to existing code the shelf number is added to this structure as it will almost always be needed when a slot number is needed.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-ChannelConfig-RoutePort-RelativePortNumber-RelativePortNumber 1.3.6.1.4.1.529.23.126.3.1.9
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-ChannelConfig-NailedGroup 1.3.6.1.4.1.529.23.126.3.1.13
A number that identifies the set of channels that makes up a nailed group.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-ChannelConfig-ChanGroup 1.3.6.1.4.1.529.23.126.3.1.14
A number that identifies the channel-group to which this channel belongs.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-ChannelConfig-DestChanGroup 1.3.6.1.4.1.529.23.126.3.1.15
A number that identifies the channel-group to which any incoming calls on this channel will be directed.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-ChannelConfig-DialPlanNumber 1.3.6.1.4.1.529.23.126.3.1.16
A number that identifies the dial plan from the dial plan menu.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-ChannelConfig-NumberOfDialPlanSelectDigits 1.3.6.1.4.1.529.23.126.3.1.17
The number of leading digits in the incoming phone number to use for selecting the Dial Plan.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-ChannelConfig-IdlePattern 1.3.6.1.4.1.529.23.126.3.1.18
The idle pattern is the data pattern sent on a channel when it is idle. The idle pattern can be any value from 0(0x00) to 255(0xff)
OBJECT-TYPE    
  INTEGER  

mibt1NetworkProfile 1.3.6.1.4.1.529.23.127
OBJECT IDENTIFIER    

mibt1NetworkProfileTable 1.3.6.1.4.1.529.23.127.1
A list of mibt1NetworkProfile profile entries.
OBJECT-TYPE    
  SEQUENCE OF  
    Mibt1NetworkProfileEntry

mibt1NetworkProfileEntry 1.3.6.1.4.1.529.23.127.1.1
A mibt1NetworkProfile entry containing objects that maps to the parameters of mibt1NetworkProfile profile.
OBJECT-TYPE    
  Mibt1NetworkProfileEntry  

t1NetworkProfile-Shelf-o 1.3.6.1.4.1.529.23.127.1.1.1
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-Slot-o 1.3.6.1.4.1.529.23.127.1.1.2
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-Item-o 1.3.6.1.4.1.529.23.127.1.1.3
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-Name 1.3.6.1.4.1.529.23.127.1.1.4
Name of DS1 line.
OBJECT-TYPE    
  DisplayString  

t1NetworkProfile-PhysicalAddress-Shelf 1.3.6.1.4.1.529.23.127.1.1.5
The number of the shelf that the addressed physical device resides on.
OBJECT-TYPE    
  INTEGER anyShelf(1), shelf1(2), shelf2(3), shelf3(4), shelf4(5), shelf5(6), shelf6(7), shelf7(8), shelf8(9), shelf9(10)  

t1NetworkProfile-PhysicalAddress-Slot 1.3.6.1.4.1.529.23.127.1.1.6
The number of the slot that the addressed physical device resides on.
OBJECT-TYPE    
  INTEGER anySlot(1), slot1(2), slot2(3), slot3(4), slot4(5), slot5(6), slot6(7), slot7(8), slot8(9), slot9(10), slot10(11), slot11(12), slot12(13), slot13(14), slot14(15), slot15(16), slot16(17), slot17(18), slot18(19), slot19(20), slot20(21), slot21(22), slot22(23), slot23(24), slot24(25), slot25(26), slot26(27), slot27(28), slot28(29), slot29(30), slot30(31), slot31(32), slot32(33), slot33(34), slot34(35), slot35(36), slot36(37), slot37(38), slot38(39), slot39(40), slot40(41), aLim(55), bLim(56), cLim(57), dLim(58), leftController(49), rightController(50), controller(42), firstControlModule(53), secondControlModule(54), trunkModule1(45), trunkModule2(46), controlModule(51), slotPrimary(59)  

t1NetworkProfile-PhysicalAddress-ItemNumber 1.3.6.1.4.1.529.23.127.1.1.7
A number that specifies an addressable entity within the context of shelf and slot.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-Enabled 1.3.6.1.4.1.529.23.127.1.1.8
TRUE if the line is enabled, otherwise FALSE.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

t1NetworkProfile-LineInterface-TOnlineType 1.3.6.1.4.1.529.23.127.1.1.9
The tonline type of an e1 line.
OBJECT-TYPE    
  INTEGER none(1), nt(2), te(3), numberOfTonline(4)  

t1NetworkProfile-LineInterface-FrameType 1.3.6.1.4.1.529.23.127.1.1.10
The super-framing mode that is used on the physical link(s).
OBJECT-TYPE    
  INTEGER d4(1), esf(2), g703(3), n-2ds(4)  

t1NetworkProfile-LineInterface-Encoding 1.3.6.1.4.1.529.23.127.1.1.11
The layer 1 line encoding used for the physical link(s).
OBJECT-TYPE    
  INTEGER ami(1), b8zs(2), hdb3(3), none(4)  

t1NetworkProfile-LineInterface-ClockSource 1.3.6.1.4.1.529.23.127.1.1.12
OBJECT-TYPE    
  INTEGER eligible(1), notEligible(2)  

t1NetworkProfile-LineInterface-ClockPriority 1.3.6.1.4.1.529.23.127.1.1.13
Clock priority assigned to the T1 line. Used to select particular lines as clock source.
OBJECT-TYPE    
  INTEGER highPriority(2), middlePriority(3), lowPriority(4)  

t1NetworkProfile-LineInterface-SignalingMode 1.3.6.1.4.1.529.23.127.1.1.14
Inband, ISDN, ISDN_NFAS, PBX or SS7 signaling.
OBJECT-TYPE    
  INTEGER inband(1), isdn(2), isdnNfas(3), e1R2Signaling(5), e1KoreanSignaling(6), e1P7Signaling(7), e1ChineseSignaling(8), e1MeteredSignaling(9), e1NoSignaling(10), e1DpnssSignaling(11), e1ArgentinaSignaling(13), e1BrazilSignaling(14), e1PhilippineSignaling(15), e1IndianSignaling(16), e1CzechSignaling(17), e1MalaysiaSignaling(19), e1NewZealandSignaling(20), e1IsraelSignaling(21), e1ThailandSignaling(22), e1KuwaitSignaling(23), e1MexicoSignaling(24), dtmfR2Signaling(25), tunneledPriSignaling(27), inbandFgdInFgdOut(28), inbandFgdInFgcOut(29), inbandFgcInFgcOut(30), inbandFgcInFgdOut(31), e1VietnamSignaling(32), ss7SigTrunk(33), h248DataTrunk(34)  

t1NetworkProfile-LineInterface-IsdnEmulationSide 1.3.6.1.4.1.529.23.127.1.1.15
Side the line will emulate: TE (user), or NT (network).
OBJECT-TYPE    
  INTEGER te(1), nt(2)  

t1NetworkProfile-LineInterface-RobbedBitMode 1.3.6.1.4.1.529.23.127.1.1.16
Wink start, idle start, incoming wink.
OBJECT-TYPE    
  INTEGER winkStart(1), idleStart(2), incW200(3), incW400(4), loopStart(5), groundStart(6)  

t1NetworkProfile-LineInterface-DefaultCallType 1.3.6.1.4.1.529.23.127.1.1.17
Specify the default call-type for incoming calls, for purposes of call routing and signalling.
OBJECT-TYPE    
  INTEGER digital(1), voice(2), dnisOrVoice(3), dnisOrDigital(4), voip(5), dnisOrVoip(6)  

t1NetworkProfile-LineInterface-SwitchType 1.3.6.1.4.1.529.23.127.1.1.18
The network switch type, needed for ISDN/NFAS signaling.
OBJECT-TYPE    
  INTEGER attPri(1), ntiPri(2), globandPri(3), japanPri(4), vn3Pri(5), onetr6Pri(6), net5Pri(7), danishPri(8), australPri(9), natIsdn2Pri(10), taiwanPri(31), isdxDpnss(11), islxDpnss(12), mercuryDpnss(13), dass2(14), btSs7(32), unknownBri(15), att5essBri(16), dms100Nt1Bri(17), nisdn1Bri(18), vn2Bri(19), btnr191Bri(20), net3Bri(21), ptpNet3Bri(22), kddBri(23), belgianBri(24), australBri(25), swissBri(26), german1tr6Bri(27), dutch1tr6Bri(28), switchCas(29), idslPtpBri(30)  

t1NetworkProfile-LineInterface-NfasGroupId 1.3.6.1.4.1.529.23.127.1.1.19
For NFAS lines: the nfas group id. Not used with robbed bit signaling.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-NfasId 1.3.6.1.4.1.529.23.127.1.1.20
For NFAS lines: the interface id. For SS7 lines when Q.931+ control protocol is used: interface id. Not used with robbed bit signaling.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-IncomingCallHandling 1.3.6.1.4.1.529.23.127.1.1.21
This parameter is used to determine the type of processing required for incoming calls from this line.
OBJECT-TYPE    
  INTEGER rejectAll(1), internalProcessing(2), ss7GatewayProcessing(3)  

t1NetworkProfile-LineInterface-DeleteDigits 1.3.6.1.4.1.529.23.127.1.1.22
Number of digits to delete from numbers received from a PBX.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-AddDigitString 1.3.6.1.4.1.529.23.127.1.1.23
String of digits to prepend to phone number received from PBX.
OBJECT-TYPE    
  DisplayString  

t1NetworkProfile-LineInterface-CallByCall 1.3.6.1.4.1.529.23.127.1.1.24
Call-by-call value to set when routing calls from PBX to network.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-PbxAnswerNumber 1.3.6.1.4.1.529.23.127.1.1.25
The answer number that is the equivalent of a port answer-number used for the network to pbx routing.
OBJECT-TYPE    
  DisplayString  

t1NetworkProfile-LineInterface-AnswerService 1.3.6.1.4.1.529.23.127.1.1.26
The switched service type (or none) that is used for routing network calls to the pbx.
OBJECT-TYPE    
  INTEGER voice(1), n-56kRestricted(2), n-64kClear(3), n-64kRestricted(4), n-56kClear(5), n-384kRestricted(6), n-384kClear(7), n-1536kClear(8), n-1536kRestricted(9), n-128kClear(10), n-192kClear(11), n-256kClear(12), n-320kClear(13), dws384Clear(14), n-448Clear(15), n-512Clear(16), n-576Clear(17), n-640Clear(18), n-704Clear(19), n-768Clear(20), n-832Clear(21), n-896Clear(22), n-960Clear(23), n-1024Clear(24), n-1088Clear(25), n-1152Clear(26), n-1216Clear(27), n-1280Clear(28), n-1344Clear(29), n-1408Clear(30), n-1472Clear(31), n-1600Clear(32), n-1664Clear(33), n-1728Clear(34), n-1792Clear(35), n-1856Clear(36), n-1920Clear(37), x30RestrictedBearer(39), v110ClearBearer(40), n-64kX30Restricted(41), n-56kV110Clear(42), modem(43), atmodem(44), n-2456kV110(46), n-4856kV110(47), n-9656kV110(48), n-19256kV110(49), n-38456kV110(50), n-2456krV110(51), n-4856krV110(52), n-9656krV110(53), n-19256krV110(54), n-38456krV110(55), n-2464kV110(56), n-4864kV110(57), n-9664kV110(58), n-19264kV110(59), n-38464kV110(60), n-2464krV110(61), n-4864krV110(62), n-9664krV110(63), n-19264krV110(64), n-38464krV110(65), v32(66), phs64k(67), voiceOverIp(68), atmSvc(70), frameRelaySvc(71), vpnTunnel(72), wormarq(73), n-14456kV110(74), n-28856kV110(75), n-14456krV110(76), n-28856krV110(77), n-14464kV110(78), n-28864kV110(79), n-14464krV110(80), n-28864krV110(81), modem31khzAudio(82), x25Svc(83), n-144kClear(255), iptoip(263)  

t1NetworkProfile-LineInterface-oPBXType 1.3.6.1.4.1.529.23.127.1.1.27
The PBX Class as defined in the enumeration above.
OBJECT-TYPE    
  INTEGER hostPbxVoice(1), hostPbxData(2), hostPbxLeasedData(3), hostPbxLeased11(4)  

t1NetworkProfile-LineInterface-DataSense 1.3.6.1.4.1.529.23.127.1.1.28
D-channel normal or inverted data. Currently unused (normal data is always selected.
OBJECT-TYPE    
  INTEGER normal(1), inv(2)  

t1NetworkProfile-LineInterface-IdleMode 1.3.6.1.4.1.529.23.127.1.1.29
D-channel mark or flag idle. Currently unused (flag idle is always selected.
OBJECT-TYPE    
  INTEGER markIdle(1), flagIdle(2)  

t1NetworkProfile-LineInterface-oFDL 1.3.6.1.4.1.529.23.127.1.1.30
Who's FDL are we using. Used only if frame-type is ESF - Ignored otherwise.
OBJECT-TYPE    
  INTEGER none(1), atNT(2), ansi(3), sprint(4)  

t1NetworkProfile-LineInterface-FrontEndType 1.3.6.1.4.1.529.23.127.1.1.31
The front end type (CSU/DSX) of the T1 transceiver.
OBJECT-TYPE    
  INTEGER csu(1), dsx(2)  

t1NetworkProfile-LineInterface-oDSXLineLength 1.3.6.1.4.1.529.23.127.1.1.32
The length of the physical T1 line (for DSX lines).
OBJECT-TYPE    
  INTEGER n-1133(1), n-134266(2), n-267399(3), n-400533(4), n-534655(5)  

t1NetworkProfile-LineInterface-oCSUBuildOut 1.3.6.1.4.1.529.23.127.1.1.33
Line buildout value for CSU lines.
OBJECT-TYPE    
  INTEGER n-0Db(1), n-75Db(2), n-15Db(3), n-2255Db(4)  

t1NetworkProfile-LineInterface-OverlapReceiving 1.3.6.1.4.1.529.23.127.1.1.34
TRUE if overlap receiving procedure may be used to handle incoming call, FALSE if not
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

t1NetworkProfile-LineInterface-PriPrefixNumber 1.3.6.1.4.1.529.23.127.1.1.35
The unique prefix of the PRI called party number. It is used to determine whether SETUP message contains any trailing digits when overlap receiving procedure is used to handle the incoming call. Defaults to '' to not count the trailing digits.
OBJECT-TYPE    
  DisplayString  

t1NetworkProfile-LineInterface-TrailingDigits 1.3.6.1.4.1.529.23.127.1.1.36
Number of trailing digits expected from the called party number information elements of INFORMATION messages when overlap receiving procedure is used to handle the incoming call. SETUP message may contain some trailing digits in the called party number information element. Defaults to 2.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-T302Timer 1.3.6.1.4.1.529.23.127.1.1.37
Number of milliseconds to wait for additional called number information elements for an incoming call using overlap receiving procedure. Defaults to 10000.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-Layer3End 1.3.6.1.4.1.529.23.127.1.1.38
If x-side, layer 3 favors outgoing call when a call collision occurs.
OBJECT-TYPE    
  INTEGER false(1), true(2)  

t1NetworkProfile-LineInterface-Layer2End 1.3.6.1.4.1.529.23.127.1.1.39
This parameter is used to determine the address to send when two PBXs are connected back-to-back; one side must act as an ET, and the other side acts as a PBX. If a-side, layer 2 acts as ET.
OBJECT-TYPE    
  INTEGER false(1), true(2)  

t1NetworkProfile-LineInterface-NlValue 1.3.6.1.4.1.529.23.127.1.1.40
Number of re-transmissions; default to 64.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-LoopAvoidance 1.3.6.1.4.1.529.23.127.1.1.41
Loop Avoidance; the number of transit PBXs through which a call may be routed (1 to 26 default 7).
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-MaintenanceState 1.3.6.1.4.1.529.23.127.1.1.42
TRUE if the line is in user-requested maintenance mode, otherwise FALSE.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

t1NetworkProfile-LineInterface-NumberComplete 1.3.6.1.4.1.529.23.127.1.1.43
The criteria for having received enough digits on an incoming R2 call. Can either be 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 13, 14, or 15 digits received, or the end-of-pulsing signal received, or time-out.
OBJECT-TYPE    
  INTEGER n-1Digits(1), n-2Digits(2), n-3Digits(3), n-4Digits(4), n-5Digits(5), n-6Digits(6), n-7Digits(7), n-8Digits(8), n-9Digits(9), n-10Digits(10), endOfPulsing(11), n-0Digits(12), n-11Digits(13), n-12Digits(14), n-13Digits(15), n-14Digits(16), n-15Digits(17), timeOut(18)  

t1NetworkProfile-LineInterface-GroupBAnswerSignal 1.3.6.1.4.1.529.23.127.1.1.44
The group B signal to send prior to answering a call.
OBJECT-TYPE    
  INTEGER signalB1(1), signalB2(2), signalB3(3), signalB4(4), signalB5(5), signalB6(6), signalB7(7), signalB8(8), signalB9(9), signalB10(10), signalB11(11), signalB12(12), signalB13(13), signalB14(14), signalB15(15)  

t1NetworkProfile-LineInterface-GroupBBusySignal 1.3.6.1.4.1.529.23.127.1.1.45
The group B signal to send to reject a call.
OBJECT-TYPE    
  INTEGER signalB1(1), signalB2(2), signalB3(3), signalB4(4), signalB5(5), signalB6(6), signalB7(7), signalB8(8), signalB9(9), signalB10(10), signalB11(11), signalB12(12), signalB13(13), signalB14(14), signalB15(15)  

t1NetworkProfile-LineInterface-GroupBNoMatchSignal 1.3.6.1.4.1.529.23.127.1.1.46
The group B signal to send to reject a call with invalid call number.
OBJECT-TYPE    
  INTEGER signalB1(1), signalB2(2), signalB3(3), signalB4(4), signalB5(5), signalB6(6), signalB7(7), signalB8(8), signalB9(9), signalB10(10), signalB11(11), signalB12(12), signalB13(13), signalB14(14), signalB15(15)  

t1NetworkProfile-LineInterface-GroupBCollectSignal 1.3.6.1.4.1.529.23.127.1.1.47
The group B signal to send to answer/reject a collect call.
OBJECT-TYPE    
  INTEGER signalB1(1), signalB2(2), signalB3(3), signalB4(4), signalB5(5), signalB6(6), signalB7(7), signalB8(8), signalB9(9), signalB10(10), signalB11(11), signalB12(12), signalB13(13), signalB14(14), signalB15(15)  

t1NetworkProfile-LineInterface-GroupIiSignal 1.3.6.1.4.1.529.23.127.1.1.48
The group II signal to send after sending all address digits.
OBJECT-TYPE    
  INTEGER signalIi1(1), signalIi2(2), signalIi3(3), signalIi4(4), signalIi5(5), signalIi6(6), signalIi7(7), signalIi8(8), signalIi9(9), signalIi10(10), signalIi11(11), signalIi12(12), signalIi13(13), signalIi14(14), signalIi15(15)  

t1NetworkProfile-LineInterface-InputSampleCount 1.3.6.1.4.1.529.23.127.1.1.49
The number of Goertzel input samples (each Goertzel sample is of length N=205) to compute in order to decode DTMF tones, the more samples, the more acccurate the detection result
OBJECT-TYPE    
  INTEGER oneSample(1), twoSamples(2)  

t1NetworkProfile-LineInterface-AnswerDelay 1.3.6.1.4.1.529.23.127.1.1.50
Number of milliseconds to wait before answering an incoming R2 call.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-CallerId 1.3.6.1.4.1.529.23.127.1.1.51
TRUE if the caller Id is enabled, otherwise FALSE.
OBJECT-TYPE    
  INTEGER noCallerId(1), getCallerId(2)  

t1NetworkProfile-LineInterface-LineSignaling 1.3.6.1.4.1.529.23.127.1.1.52
The line signaling of E1 line.
OBJECT-TYPE    
  INTEGER abBitsLineSignaling(1), aBitOnly0EqualBBit(2), aBitOnly1EqualBBit(3)  

t1NetworkProfile-LineInterface-Timer1CollectCall 1.3.6.1.4.1.529.23.127.1.1.53
Adjustable between 0 ~ 2000ms
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-Timer2CollectCall 1.3.6.1.4.1.529.23.127.1.1.54
Adjustable between 10 ~ 2000ms
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-SendDiscVal 1.3.6.1.4.1.529.23.127.1.1.55
Number of seconds before sending ISDN disconnect to switch. 0 means disable.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-HuntGrpPhoneNumber1 1.3.6.1.4.1.529.23.127.1.1.56
The hunt group phone number associated with this line. Manually entered field which is read-write accessible via SNMP.
OBJECT-TYPE    
  DisplayString  

t1NetworkProfile-LineInterface-HuntGrpPhoneNumber2 1.3.6.1.4.1.529.23.127.1.1.57
The hunt group phone number associated with this line. Manually entered field which is read-write accessible via SNMP.
OBJECT-TYPE    
  DisplayString  

t1NetworkProfile-LineInterface-HuntGrpPhoneNumber3 1.3.6.1.4.1.529.23.127.1.1.58
The hunt group phone number associated with this line. Manually entered field which is read-write accessible via SNMP.
OBJECT-TYPE    
  DisplayString  

t1NetworkProfile-LineInterface-PriTypeOfNumber 1.3.6.1.4.1.529.23.127.1.1.59
PRI Called Party element's Type-Of-Number value for outgoing T1-to-PRI calls.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-PriNumberingPlanId 1.3.6.1.4.1.529.23.127.1.1.60
PRI Called Party element's Numbering-Plan-ID value for outgoing T1-to-PRI calls.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-SuperFrameSrcLineNumber 1.3.6.1.4.1.529.23.127.1.1.61
The line from which the the Super-Frame sync pulse is taken. Needed by the 'Dropped&Inserted' line so that it can become synchronized to the source line.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-CollectIncomingDigits 1.3.6.1.4.1.529.23.127.1.1.62
TRUE collect incoming called/calling digits, otherwise FALSE.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

t1NetworkProfile-LineInterface-T1InterDigitTimeout 1.3.6.1.4.1.529.23.127.1.1.63
Inter-Digit Timeout (in milliseconds) for inband T1 and E1 R2 lines.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-R1UseAnir 1.3.6.1.4.1.529.23.127.1.1.64
TRUE if the line is to use R1 signaling ANIR (CLID), otherwise FALSE.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

t1NetworkProfile-LineInterface-R1FirstDigitTimer 1.3.6.1.4.1.529.23.127.1.1.65
The timer between sending KPA and receiving first Digit in R1 signaling in milliseconds.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-R1AnirDelay 1.3.6.1.4.1.529.23.127.1.1.66
Delay in milliseconds between receiving ST and sending ANIR signal.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-R1AnirTimer 1.3.6.1.4.1.529.23.127.1.1.67
Time in milliseconds of ANIR signal.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-R1Modified 1.3.6.1.4.1.529.23.127.1.1.68
Use R1 modified signaling. Default is FALSE.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

t1NetworkProfile-LineInterface-FirstDs0 1.3.6.1.4.1.529.23.127.1.1.69
When using fractional T1/E1 the first DS0 used. Default is 1
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-LastDs0 1.3.6.1.4.1.529.23.127.1.1.70
When using fractional T1/E1 the last DS0 used. Default is 24
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-NailedGroup 1.3.6.1.4.1.529.23.127.1.1.71
A number that identifies the set of lines that makes up a nailed group. 0 means this line is not part of a nailed group.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-Ss7Continuity-IncomingProcedure 1.3.6.1.4.1.529.23.127.1.1.72
Procedure used for incoming continuity check on this line.
OBJECT-TYPE    
  INTEGER loopback(2), transponder(3)  

t1NetworkProfile-LineInterface-Ss7Continuity-OutgoingProcedure 1.3.6.1.4.1.529.23.127.1.1.73
Procedure used for outgoing continuity check on this line.
OBJECT-TYPE    
  INTEGER singleTone2010(2), send2010Expect1780(3), send1780Expect2010(4), singleTone2000(5), send2000Expect1780(6), send1780Expect2000(7)  

t1NetworkProfile-LineInterface-LineProvision 1.3.6.1.4.1.529.23.127.1.1.74
Line Provision.
OBJECT-TYPE    
  INTEGER lineProvisionNone(1), lineProvisionH0(2), lineProvisionH11(3), lineProvisionH0H11(4), lineProvisionH12(5), lineProvisionH0H12(6), lineProvisionH11H12(7), lineProvisionH0H11H12(8)  

t1NetworkProfile-LineInterface-Gr303Mode 1.3.6.1.4.1.529.23.127.1.1.75
GR-303 Mode.
OBJECT-TYPE    
  INTEGER gr303Disabled(1), gr3035essPri(2), gr303DmsPri(3), gr303Secondary(4), gr303Normal(5)  

t1NetworkProfile-LineInterface-Gr303GroupId 1.3.6.1.4.1.529.23.127.1.1.76
For GR303 lines: the interface group id.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-Gr303Ds1Id 1.3.6.1.4.1.529.23.127.1.1.77
For GR303 lines: The logical DS1 id.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-SwitchVersion 1.3.6.1.4.1.529.23.127.1.1.78
Switch Version.
OBJECT-TYPE    
  INTEGER switchVersionGeneric(1), switchVersionDefinityG3v4(2)  

t1NetworkProfile-BackToBack 1.3.6.1.4.1.529.23.127.1.1.79
Indicates whether the Multiband is connected back-to-back to another Muliband, rather than a DPNSS PBX. If this field is TRUE, than we don't need to disable receiving interrupts when too many are coming in beyond our processing power. NOTE: GPT's iSDX keeps re-transmitting a frame at 8 ms intervals until it receives an acknowledgement.
OBJECT-TYPE    
  INTEGER false(1), true(2)  

t1NetworkProfile-ChannelUsage 1.3.6.1.4.1.529.23.127.1.1.80
This is the use of the first T1 interface.
OBJECT-TYPE    
  INTEGER lineUnavailable(1), lineDisable(2), t1LineQuiesce(3), dropAndInsert(4), dualNetworkInterface(5), tOnlineUsrInterface(6), tOnlineZgrInterface(7)  

t1NetworkProfile-Action-o 1.3.6.1.4.1.529.23.127.1.1.81
OBJECT-TYPE    
  INTEGER noAction(1), createProfile(2), deleteProfile(3)  

t1NetworkProfile-LineInterface-GroupBNoChargeSignal 1.3.6.1.4.1.529.23.127.1.1.82
The group B signal to send if subscriber line is idle / no charge
OBJECT-TYPE    
  INTEGER signalB1(1), signalB2(2), signalB3(3), signalB4(4), signalB5(5), signalB6(6), signalB7(7), signalB8(8), signalB9(9), signalB10(10), signalB11(11), signalB12(12), signalB13(13), signalB14(14), signalB15(15)  

t1NetworkProfile-LineInterface-StatusChangeTrapEnable 1.3.6.1.4.1.529.23.127.1.1.83
When set to yes, a line status change trap is sent. NOTE: when the line status change results from a higher level line status change, i.e., ds3, then no trap for the ds1 are sent. The default setting is No.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

t1NetworkProfile-LineInterface-DownTransDelay 1.3.6.1.4.1.529.23.127.1.1.84
To control the delay in line state transition from up to down when loss of carrier is detected. Each unit of this value is equal to .1 seconds of Delay in UP to DOWN transition.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-UpTransDelay 1.3.6.1.4.1.529.23.127.1.1.85
To control the delay in line state transition from down to up when carrier is detected. Each unit of this value is equal to .1 seconds of Delay in DOWN to UP transition.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-NetworkSpecificFacilities 1.3.6.1.4.1.529.23.127.1.1.87
Network Specific Facilities (NSF) value to store in the NSF IE of the outgoing Q.931 Setup message. This sets the full 8 bits of the IE.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-CauseCodeVerificationEnable 1.3.6.1.4.1.529.23.127.1.1.88
When set to yes, the received CAUSE value will be verified to ensure that cause is defined for the configured switch type. If the switch does not support the cause code, then INVALID ELEM CONTENTS (Cause value 100) will be used for generating PSTN Q931 response. When set to no, the received CAUSE value will be used to generate the PSTN Q931 response.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

mibt1NetworkProfile-LineInterface-ChannelConfigTable 1.3.6.1.4.1.529.23.127.2
A list of mibt1NetworkProfile__line_interface__channel_config profile entries.
OBJECT-TYPE    
  SEQUENCE OF  
    Mibt1NetworkProfile-LineInterface-ChannelConfigEntry

mibt1NetworkProfile-LineInterface-ChannelConfigEntry 1.3.6.1.4.1.529.23.127.2.1
A mibt1NetworkProfile__line_interface__channel_config entry containing objects that maps to the parameters of mibt1NetworkProfile__line_interface__channel_config profile.
OBJECT-TYPE    
  Mibt1NetworkProfile-LineInterface-ChannelConfigEntry  

t1NetworkProfile-LineInterface-ChannelConfig-Shelf-o 1.3.6.1.4.1.529.23.127.2.1.1
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-ChannelConfig-Slot-o 1.3.6.1.4.1.529.23.127.2.1.2
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-ChannelConfig-Item-o 1.3.6.1.4.1.529.23.127.2.1.3
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-ChannelConfig-Index-o 1.3.6.1.4.1.529.23.127.2.1.4
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-ChannelConfig-ChannelUsage 1.3.6.1.4.1.529.23.127.2.1.5
The usage for this specific channel. May be different than the usage for the line, e.g. a nailed channel (clear 64) in a line otherwise used for switched calls.
OBJECT-TYPE    
  INTEGER unusedChannel(1), switchedChannel(2), nailed64Channel(3), dChannel(4), nfasPrimaryDChannel(5), nfasSecondaryDChannel(6), semiPermChannel(7), ss7SignalingChannel(8)  

t1NetworkProfile-LineInterface-ChannelConfig-TrunkGroup 1.3.6.1.4.1.529.23.127.2.1.6
The trunk group assigned to this channel.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-ChannelConfig-PhoneNumber 1.3.6.1.4.1.529.23.127.2.1.7
The phone number of this channel. This is the number sent to the far end in an inverse multiplexed call when instructing the far end to add more bandwidth. The number should contain the minimum number of digits to identify the channel. If the channel is part of a hunt group, the phone number should be blank.
OBJECT-TYPE    
  DisplayString  

t1NetworkProfile-LineInterface-ChannelConfig-RoutePort-SlotNumber-SlotNumber 1.3.6.1.4.1.529.23.127.2.1.8
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-ChannelConfig-RoutePort-SlotNumber-ShelfNumber 1.3.6.1.4.1.529.23.127.2.1.9
TNT is a multi shelf system. To minimise the changes required to existing code the shelf number is added to this structure as it will almost always be needed when a slot number is needed.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-ChannelConfig-RoutePort-RelativePortNumber-RelativePortNumber 1.3.6.1.4.1.529.23.127.2.1.10
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-ChannelConfig-NailedGroup 1.3.6.1.4.1.529.23.127.2.1.14
A number that identifies the set of channels that makes up a nailed group.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-ChannelConfig-ChanGroup 1.3.6.1.4.1.529.23.127.2.1.15
A number that identifies the channel-group to which this channel belongs.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-ChannelConfig-DestChanGroup 1.3.6.1.4.1.529.23.127.2.1.16
A number that identifies the channel-group to which any incoming calls on this channel will be directed.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-ChannelConfig-DialPlanNumber 1.3.6.1.4.1.529.23.127.2.1.17
A number that identifies the dial plan from the dial plan menu.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-ChannelConfig-NumberOfDialPlanSelectDigits 1.3.6.1.4.1.529.23.127.2.1.18
The number of leading digits in the incoming phone number to use for selecting the Dial Plan.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-ChannelConfig-IdlePattern 1.3.6.1.4.1.529.23.127.2.1.19
The idle pattern is the data pattern sent on a channel when it is idle. The idle pattern can be any value from 0(0x00) to 255(0xff)
OBJECT-TYPE    
  INTEGER  

Defined Objects

DisplayString  
OCTET STRING    

Mibt1NetworkProfileEntry  
SEQUENCE    
  INTEGER as t1NetworkProfile-Shelf-o  
  INTEGER as t1NetworkProfile-Slot-o  
  INTEGER as t1NetworkProfile-Item-o  
  DisplayString as t1NetworkProfile-Name  
  INTEGER as t1NetworkProfile-PhysicalAddress-Shelf  
  INTEGER as t1NetworkProfile-PhysicalAddress-Slot  
  INTEGER as t1NetworkProfile-PhysicalAddress-ItemNumber  
  INTEGER as t1NetworkProfile-LineInterface-Enabled  
  INTEGER as t1NetworkProfile-LineInterface-TOnlineType  
  INTEGER as t1NetworkProfile-LineInterface-FrameType  
  INTEGER as t1NetworkProfile-LineInterface-Encoding  
  INTEGER as t1NetworkProfile-LineInterface-ClockSource  
  INTEGER as t1NetworkProfile-LineInterface-ClockPriority  
  INTEGER as t1NetworkProfile-LineInterface-SignalingMode  
  INTEGER as t1NetworkProfile-LineInterface-IsdnEmulationSide  
  INTEGER as t1NetworkProfile-LineInterface-RobbedBitMode  
  INTEGER as t1NetworkProfile-LineInterface-DefaultCallType  
  INTEGER as t1NetworkProfile-LineInterface-SwitchType  
  INTEGER as t1NetworkProfile-LineInterface-NfasGroupId  
  INTEGER as t1NetworkProfile-LineInterface-NfasId  
  INTEGER as t1NetworkProfile-LineInterface-IncomingCallHandling  
  INTEGER as t1NetworkProfile-LineInterface-DeleteDigits  
  DisplayString as t1NetworkProfile-LineInterface-AddDigitString  
  INTEGER as t1NetworkProfile-LineInterface-CallByCall  
  INTEGER as t1NetworkProfile-LineInterface-NetworkSpecificFacilities  
  DisplayString as t1NetworkProfile-LineInterface-PbxAnswerNumber  
  INTEGER as t1NetworkProfile-LineInterface-AnswerService  
  INTEGER as t1NetworkProfile-LineInterface-oPBXType  
  INTEGER as t1NetworkProfile-LineInterface-DataSense  
  INTEGER as t1NetworkProfile-LineInterface-IdleMode  
  INTEGER as t1NetworkProfile-LineInterface-oFDL  
  INTEGER as t1NetworkProfile-LineInterface-FrontEndType  
  INTEGER as t1NetworkProfile-LineInterface-oDSXLineLength  
  INTEGER as t1NetworkProfile-LineInterface-oCSUBuildOut  
  INTEGER as t1NetworkProfile-LineInterface-OverlapReceiving  
  DisplayString as t1NetworkProfile-LineInterface-PriPrefixNumber  
  INTEGER as t1NetworkProfile-LineInterface-TrailingDigits  
  INTEGER as t1NetworkProfile-LineInterface-T302Timer  
  INTEGER as t1NetworkProfile-LineInterface-Layer3End  
  INTEGER as t1NetworkProfile-LineInterface-Layer2End  
  INTEGER as t1NetworkProfile-LineInterface-NlValue  
  INTEGER as t1NetworkProfile-LineInterface-LoopAvoidance  
  INTEGER as t1NetworkProfile-LineInterface-MaintenanceState  
  INTEGER as t1NetworkProfile-LineInterface-NumberComplete  
  INTEGER as t1NetworkProfile-LineInterface-GroupBAnswerSignal  
  INTEGER as t1NetworkProfile-LineInterface-GroupBBusySignal  
  INTEGER as t1NetworkProfile-LineInterface-GroupBNoMatchSignal  
  INTEGER as t1NetworkProfile-LineInterface-GroupBCollectSignal  
  INTEGER as t1NetworkProfile-LineInterface-GroupBNoChargeSignal  
  INTEGER as t1NetworkProfile-LineInterface-GroupIiSignal  
  INTEGER as t1NetworkProfile-LineInterface-InputSampleCount  
  INTEGER as t1NetworkProfile-LineInterface-AnswerDelay  
  INTEGER as t1NetworkProfile-LineInterface-CallerId  
  INTEGER as t1NetworkProfile-LineInterface-LineSignaling  
  INTEGER as t1NetworkProfile-LineInterface-Timer1CollectCall  
  INTEGER as t1NetworkProfile-LineInterface-Timer2CollectCall  
  INTEGER as t1NetworkProfile-LineInterface-SendDiscVal  
  DisplayString as t1NetworkProfile-LineInterface-HuntGrpPhoneNumber1  
  DisplayString as t1NetworkProfile-LineInterface-HuntGrpPhoneNumber2  
  DisplayString as t1NetworkProfile-LineInterface-HuntGrpPhoneNumber3  
  INTEGER as t1NetworkProfile-LineInterface-PriTypeOfNumber  
  INTEGER as t1NetworkProfile-LineInterface-PriNumberingPlanId  
  INTEGER as t1NetworkProfile-LineInterface-SuperFrameSrcLineNumber  
  INTEGER as t1NetworkProfile-LineInterface-CollectIncomingDigits  
  INTEGER as t1NetworkProfile-LineInterface-T1InterDigitTimeout  
  INTEGER as t1NetworkProfile-LineInterface-R1UseAnir  
  INTEGER as t1NetworkProfile-LineInterface-R1FirstDigitTimer  
  INTEGER as t1NetworkProfile-LineInterface-R1AnirDelay  
  INTEGER as t1NetworkProfile-LineInterface-R1AnirTimer  
  INTEGER as t1NetworkProfile-LineInterface-R1Modified  
  INTEGER as t1NetworkProfile-LineInterface-FirstDs0  
  INTEGER as t1NetworkProfile-LineInterface-LastDs0  
  INTEGER as t1NetworkProfile-LineInterface-NailedGroup  
  INTEGER as t1NetworkProfile-LineInterface-Ss7Continuity-IncomingProcedure  
  INTEGER as t1NetworkProfile-LineInterface-Ss7Continuity-OutgoingProcedure  
  INTEGER as t1NetworkProfile-LineInterface-LineProvision  
  INTEGER as t1NetworkProfile-LineInterface-Gr303Mode  
  INTEGER as t1NetworkProfile-LineInterface-Gr303GroupId  
  INTEGER as t1NetworkProfile-LineInterface-Gr303Ds1Id  
  INTEGER as t1NetworkProfile-LineInterface-SwitchVersion  
  INTEGER as t1NetworkProfile-LineInterface-DownTransDelay  
  INTEGER as t1NetworkProfile-LineInterface-UpTransDelay  
  INTEGER as t1NetworkProfile-LineInterface-StatusChangeTrapEnable  
  INTEGER as t1NetworkProfile-LineInterface-CauseCodeVerificationEnable  
  INTEGER as t1NetworkProfile-BackToBack  
  INTEGER as t1NetworkProfile-ChannelUsage  
  INTEGER as t1NetworkProfile-Action-o  

Mibt1NetworkProfile-LineInterface-ChannelConfigEntry  
SEQUENCE    
  INTEGER as t1NetworkProfile-LineInterface-ChannelConfig-Shelf-o  
  INTEGER as t1NetworkProfile-LineInterface-ChannelConfig-Slot-o  
  INTEGER as t1NetworkProfile-LineInterface-ChannelConfig-Item-o  
  INTEGER as t1NetworkProfile-LineInterface-ChannelConfig-Index-o  
  INTEGER as t1NetworkProfile-LineInterface-ChannelConfig-ChannelUsage  
  INTEGER as t1NetworkProfile-LineInterface-ChannelConfig-TrunkGroup  
  DisplayString as t1NetworkProfile-LineInterface-ChannelConfig-PhoneNumber  
  INTEGER as t1NetworkProfile-LineInterface-ChannelConfig-RoutePort-SlotNumber-SlotNumber  
  INTEGER as t1NetworkProfile-LineInterface-ChannelConfig-RoutePort-SlotNumber-ShelfNumber  
  INTEGER as t1NetworkProfile-LineInterface-ChannelConfig-RoutePort-RelativePortNumber-RelativePortNumber  
  INTEGER as t1NetworkProfile-LineInterface-ChannelConfig-NailedGroup  
  INTEGER as t1NetworkProfile-LineInterface-ChannelConfig-ChanGroup  
  INTEGER as t1NetworkProfile-LineInterface-ChannelConfig-DestChanGroup  
  INTEGER as t1NetworkProfile-LineInterface-ChannelConfig-DialPlanNumber  
  INTEGER as t1NetworkProfile-LineInterface-ChannelConfig-NumberOfDialPlanSelectDigits  
  INTEGER as t1NetworkProfile-LineInterface-ChannelConfig-IdlePattern  

Mibt1NetworkProfileV1Entry  
SEQUENCE    
  INTEGER as t1NetworkProfileV1-ProfileNumber  
  DisplayString as t1NetworkProfileV1-Name  
  INTEGER as t1NetworkProfileV1-PhysicalAddress-Shelf  
  INTEGER as t1NetworkProfileV1-PhysicalAddress-Slot  
  INTEGER as t1NetworkProfileV1-PhysicalAddress-ItemNumber  
  INTEGER as t1NetworkProfileV1-BackToBack  
  INTEGER as t1NetworkProfileV1-PrimaryChannelUsage  
  INTEGER as t1NetworkProfileV1-SecondaryChannelUsage  
  INTEGER as t1NetworkProfileV1-TertiaryChannelUsage  
  INTEGER as t1NetworkProfileV1-Action-o  

Mibt1NetworkProfileV1-LineInterfaceEntry  
SEQUENCE    
  DisplayString as t1NetworkProfileV1-LineInterface-Name  
  INTEGER as t1NetworkProfileV1-LineInterface-Index-o  
  INTEGER as t1NetworkProfileV1-LineInterface-Enabled  
  INTEGER as t1NetworkProfileV1-LineInterface-TOnlineType  
  INTEGER as t1NetworkProfileV1-LineInterface-FrameType  
  INTEGER as t1NetworkProfileV1-LineInterface-Encoding  
  INTEGER as t1NetworkProfileV1-LineInterface-ClockSource  
  INTEGER as t1NetworkProfileV1-LineInterface-ClockPriority  
  INTEGER as t1NetworkProfileV1-LineInterface-SignalingMode  
  INTEGER as t1NetworkProfileV1-LineInterface-IsdnEmulationSide  
  INTEGER as t1NetworkProfileV1-LineInterface-RobbedBitMode  
  INTEGER as t1NetworkProfileV1-LineInterface-DefaultCallType  
  INTEGER as t1NetworkProfileV1-LineInterface-SwitchType  
  INTEGER as t1NetworkProfileV1-LineInterface-NfasGroupId  
  INTEGER as t1NetworkProfileV1-LineInterface-NfasId  
  INTEGER as t1NetworkProfileV1-LineInterface-IncomingCallHandling  
  INTEGER as t1NetworkProfileV1-LineInterface-DeleteDigits  
  DisplayString as t1NetworkProfileV1-LineInterface-AddDigitString  
  INTEGER as t1NetworkProfileV1-LineInterface-CallByCall  
  INTEGER as t1NetworkProfileV1-LineInterface-NetworkSpecificFacilities  
  DisplayString as t1NetworkProfileV1-LineInterface-PbxAnswerNumber  
  INTEGER as t1NetworkProfileV1-LineInterface-AnswerService  
  INTEGER as t1NetworkProfileV1-LineInterface-oPBXType  
  INTEGER as t1NetworkProfileV1-LineInterface-DataSense  
  INTEGER as t1NetworkProfileV1-LineInterface-IdleMode  
  INTEGER as t1NetworkProfileV1-LineInterface-oFDL  
  INTEGER as t1NetworkProfileV1-LineInterface-FrontEndType  
  INTEGER as t1NetworkProfileV1-LineInterface-oDSXLineLength  
  INTEGER as t1NetworkProfileV1-LineInterface-oCSUBuildOut  
  INTEGER as t1NetworkProfileV1-LineInterface-OverlapReceiving  
  DisplayString as t1NetworkProfileV1-LineInterface-PriPrefixNumber  
  INTEGER as t1NetworkProfileV1-LineInterface-TrailingDigits  
  INTEGER as t1NetworkProfileV1-LineInterface-T302Timer  
  INTEGER as t1NetworkProfileV1-LineInterface-Layer3End  
  INTEGER as t1NetworkProfileV1-LineInterface-Layer2End  
  INTEGER as t1NetworkProfileV1-LineInterface-NlValue  
  INTEGER as t1NetworkProfileV1-LineInterface-LoopAvoidance  
  INTEGER as t1NetworkProfileV1-LineInterface-MaintenanceState  
  INTEGER as t1NetworkProfileV1-LineInterface-NumberComplete  
  INTEGER as t1NetworkProfileV1-LineInterface-GroupBAnswerSignal  
  INTEGER as t1NetworkProfileV1-LineInterface-GroupBBusySignal  
  INTEGER as t1NetworkProfileV1-LineInterface-GroupBNoMatchSignal  
  INTEGER as t1NetworkProfileV1-LineInterface-GroupBCollectSignal  
  INTEGER as t1NetworkProfileV1-LineInterface-GroupBNoChargeSignal  
  INTEGER as t1NetworkProfileV1-LineInterface-GroupIiSignal  
  INTEGER as t1NetworkProfileV1-LineInterface-InputSampleCount  
  INTEGER as t1NetworkProfileV1-LineInterface-AnswerDelay  
  INTEGER as t1NetworkProfileV1-LineInterface-CallerId  
  INTEGER as t1NetworkProfileV1-LineInterface-LineSignaling  
  INTEGER as t1NetworkProfileV1-LineInterface-Timer1CollectCall  
  INTEGER as t1NetworkProfileV1-LineInterface-Timer2CollectCall  
  INTEGER as t1NetworkProfileV1-LineInterface-SendDiscVal  
  DisplayString as t1NetworkProfileV1-LineInterface-HuntGrpPhoneNumber1  
  DisplayString as t1NetworkProfileV1-LineInterface-HuntGrpPhoneNumber2  
  DisplayString as t1NetworkProfileV1-LineInterface-HuntGrpPhoneNumber3  
  INTEGER as t1NetworkProfileV1-LineInterface-PriTypeOfNumber  
  INTEGER as t1NetworkProfileV1-LineInterface-PriNumberingPlanId  
  INTEGER as t1NetworkProfileV1-LineInterface-SuperFrameSrcLineNumber  
  INTEGER as t1NetworkProfileV1-LineInterface-CollectIncomingDigits  
  INTEGER as t1NetworkProfileV1-LineInterface-T1InterDigitTimeout  
  INTEGER as t1NetworkProfileV1-LineInterface-R1UseAnir  
  INTEGER as t1NetworkProfileV1-LineInterface-R1FirstDigitTimer  
  INTEGER as t1NetworkProfileV1-LineInterface-R1AnirDelay  
  INTEGER as t1NetworkProfileV1-LineInterface-R1AnirTimer  
  INTEGER as t1NetworkProfileV1-LineInterface-R1Modified  
  INTEGER as t1NetworkProfileV1-LineInterface-FirstDs0  
  INTEGER as t1NetworkProfileV1-LineInterface-LastDs0  
  INTEGER as t1NetworkProfileV1-LineInterface-NailedGroup  
  INTEGER as t1NetworkProfileV1-LineInterface-Ss7Continuity-IncomingProcedure  
  INTEGER as t1NetworkProfileV1-LineInterface-Ss7Continuity-OutgoingProcedure  
  INTEGER as t1NetworkProfileV1-LineInterface-LineProvision  
  INTEGER as t1NetworkProfileV1-LineInterface-Gr303Mode  
  INTEGER as t1NetworkProfileV1-LineInterface-Gr303GroupId  
  INTEGER as t1NetworkProfileV1-LineInterface-Gr303Ds1Id  
  INTEGER as t1NetworkProfileV1-LineInterface-SwitchVersion  
  INTEGER as t1NetworkProfileV1-LineInterface-DownTransDelay  
  INTEGER as t1NetworkProfileV1-LineInterface-UpTransDelay  
  INTEGER as t1NetworkProfileV1-LineInterface-StatusChangeTrapEnable  
  INTEGER as t1NetworkProfileV1-LineInterface-CauseCodeVerificationEnable  

Mibt1NetworkProfileV1-LineInterface-ChannelConfigEntry  
SEQUENCE    
  DisplayString as t1NetworkProfileV1-LineInterface-ChannelConfig-Name  
  INTEGER as t1NetworkProfileV1-LineInterface-ChannelConfig-Index-o  
  INTEGER as t1NetworkProfileV1-LineInterface-ChannelConfig-Index1-o  
  INTEGER as t1NetworkProfileV1-LineInterface-ChannelConfig-ChannelUsage  
  INTEGER as t1NetworkProfileV1-LineInterface-ChannelConfig-TrunkGroup  
  DisplayString as t1NetworkProfileV1-LineInterface-ChannelConfig-PhoneNumber  
  INTEGER as t1NetworkProfileV1-LineInterface-ChannelConfig-RoutePort-SlotNumber-SlotNumber  
  INTEGER as t1NetworkProfileV1-LineInterface-ChannelConfig-RoutePort-SlotNumber-ShelfNumber  
  INTEGER as t1NetworkProfileV1-LineInterface-ChannelConfig-RoutePort-RelativePortNumber-RelativePortNumber  
  INTEGER as t1NetworkProfileV1-LineInterface-ChannelConfig-NailedGroup  
  INTEGER as t1NetworkProfileV1-LineInterface-ChannelConfig-ChanGroup  
  INTEGER as t1NetworkProfileV1-LineInterface-ChannelConfig-DestChanGroup  
  INTEGER as t1NetworkProfileV1-LineInterface-ChannelConfig-DialPlanNumber  
  INTEGER as t1NetworkProfileV1-LineInterface-ChannelConfig-NumberOfDialPlanSelectDigits  
  INTEGER as t1NetworkProfileV1-LineInterface-ChannelConfig-IdlePattern