
| ASCEND-MIB | RFC1155-SMI | RFC-1212 |
| configuration | IpAddress | OBJECT-TYPE |
| mibtermSrvProfile | 1.3.6.1.4.1.529.23.133 | ||
| OBJECT IDENTIFIER | |||
| mibtermSrvProfileTable | 1.3.6.1.4.1.529.23.133.1 | ||
| A list of mibtermSrvProfile profile entries. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MibtermSrvProfileEntry | |||
| mibtermSrvProfileEntry | 1.3.6.1.4.1.529.23.133.1.1 | ||
| A mibtermSrvProfile entry containing objects that maps to the parameters of mibtermSrvProfile profile. | |||
| OBJECT-TYPE | |||
| MibtermSrvProfileEntry | |||
| termSrvProfile-Index-o | 1.3.6.1.4.1.529.23.133.1.1.1 | ||
| OBJECT-TYPE | |||
| INTEGER | |||
| termSrvProfile-Enabled | 1.3.6.1.4.1.529.23.133.1.1.2 | ||
| Terminal server availability flag. When set to no all terminal server functions are disabled. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| termSrvProfile-SecurityMode | 1.3.6.1.4.1.529.23.133.1.1.3 | ||
| Indicates the type of terminal server security (if any). | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), partial(2), full(3) | ||
| termSrvProfile-ModemConfiguration-V42-mnp | 1.3.6.1.4.1.529.23.133.1.1.4 | ||
| Describes the modem error correction mode. Error correction can be required, not used, or optional. | |||
| OBJECT-TYPE | |||
| INTEGER | wontV42(1), willV42(2), mustV42(3) | ||
| termSrvProfile-ModemConfiguration-MaxBaudRate | 1.3.6.1.4.1.529.23.133.1.1.5 | ||
| Describes the maximum connection baud rate the modems should try. | |||
| OBJECT-TYPE | |||
| INTEGER | n-33600MaxBaud(1), n-31200MaxBaud(2), n-28800MaxBaud(3), n-26400MaxBaud(4), n-24000MaxBaud(5), n-21600MaxBaud(6), n-19200MaxBaud(7), n-16800MaxBaud(8), n-14400MaxBaud(9), n-12000MaxBaud(10), n-9600MaxBaud(11), n-7200MaxBaud(12), n-4800MaxBaud(13), n-2400MaxBaud(14) | ||
| termSrvProfile-ModemConfiguration-ModemTransmitLevel | 1.3.6.1.4.1.529.23.133.1.1.6 | ||
| The transmit attenuate level the modems should try. | |||
| OBJECT-TYPE | |||
| INTEGER | level-13DbMdmTrnLevel(11), level-14DbMdmTrnLevel(12), level-15DbMdmTrnLevel(13), level-16DbMdmTrnLevel(14), level-17DbMdmTrnLevel(15), level-18DbMdmTrnLevel(16) | ||
| termSrvProfile-ModemConfiguration-CellModeFirst | 1.3.6.1.4.1.529.23.133.1.1.7 | ||
| If yes, the modem attempts cellular connection first - then land connection. If no, land based is attempted first, then cellular. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| termSrvProfile-ModemConfiguration-CellLevel | 1.3.6.1.4.1.529.23.133.1.1.8 | ||
| The modem cellular communications transmit and receive level. Valid values are -10 db .. -18 db. | |||
| OBJECT-TYPE | |||
| INTEGER | level-18DbCellLevel(1), level-17DbCellLevel(2), level-16DbCellLevel(3), level-15DbCellLevel(4), level-14DbCellLevel(5), level-13DbCellLevel(6), level-12DbCellLevel(7), level-11DbCellLevel(8), level-10DbCellLevel(9) | ||
| termSrvProfile-ModemConfiguration-o7Even | 1.3.6.1.4.1.529.23.133.1.1.9 | ||
| If set to yes, all incoming data has its parity bit cleared and all outgoing data is forced to 7 bits with even parity. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| termSrvProfile-ModemConfiguration-ModemMod | 1.3.6.1.4.1.529.23.133.1.1.10 | ||
| The modulation protocol to be attempted by the modems. | |||
| OBJECT-TYPE | |||
| INTEGER | k56Modulation(1), v34Modulation(2), v90Modulation(3), v92Modulation(4) | ||
| termSrvProfile-ModemConfiguration-oATAnswerString | 1.3.6.1.4.1.529.23.133.1.1.11 | ||
| Allows the user to enter any additional AT commands in the modem answer string. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| termSrvProfile-TerminalModeConfiguration-SilentMode | 1.3.6.1.4.1.529.23.133.1.1.12 | ||
| Don't generate any status messages upon connection. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| termSrvProfile-TerminalModeConfiguration-ClearScreen | 1.3.6.1.4.1.529.23.133.1.1.13 | ||
| Clear the screen at terminal server startup. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| termSrvProfile-TerminalModeConfiguration-SystemPassword | 1.3.6.1.4.1.529.23.133.1.1.14 | ||
| Global terminal server system access password. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| termSrvProfile-TerminalModeConfiguration-Banner | 1.3.6.1.4.1.529.23.133.1.1.15 | ||
| The terminal server login banner. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| termSrvProfile-TerminalModeConfiguration-LoginPrompt | 1.3.6.1.4.1.529.23.133.1.1.16 | ||
| The string used to prompt for user name when authentication is in use. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| termSrvProfile-TerminalModeConfiguration-PasswordPrompt | 1.3.6.1.4.1.529.23.133.1.1.17 | ||
| The string used to prompt for password when authentication is in use. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| termSrvProfile-TerminalModeConfiguration-ThirdLoginPrompt | 1.3.6.1.4.1.529.23.133.1.1.18 | ||
| An optional third prompt for a terminal server login. If this value is null no third prompt is used. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| termSrvProfile-TerminalModeConfiguration-ThirdPromptSequence | 1.3.6.1.4.1.529.23.133.1.1.19 | ||
| Select where the third prompt should appear in the login sequence: either before or after user name & password. | |||
| OBJECT-TYPE | |||
| INTEGER | last(1), first(2) | ||
| termSrvProfile-TerminalModeConfiguration-Prompt | 1.3.6.1.4.1.529.23.133.1.1.20 | ||
| The current terminal server prompt. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| termSrvProfile-TerminalModeConfiguration-TerminalType | 1.3.6.1.4.1.529.23.133.1.1.21 | ||
| The default terminal type for telnet and rlogin sessions. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| termSrvProfile-TerminalModeConfiguration-ClearCall | 1.3.6.1.4.1.529.23.133.1.1.22 | ||
| Select operation when a telnet/rlogin/tcp session terminates. When set to yes, the dial-in session will also terminate. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| termSrvProfile-TerminalModeConfiguration-BufferChars | 1.3.6.1.4.1.529.23.133.1.1.23 | ||
| Whether to buffer termserv characters or to forward them without buffering. Buffering provides better throughput at a slight increase in latency. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| termSrvProfile-TerminalModeConfiguration-Ping | 1.3.6.1.4.1.529.23.133.1.1.24 | ||
| Enable/disable the ping command from the terminal server. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| termSrvProfile-TerminalModeConfiguration-Traceroute | 1.3.6.1.4.1.529.23.133.1.1.25 | ||
| Enable/disable the traceroute command from the terminal server. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| termSrvProfile-TerminalModeConfiguration-Tcp | 1.3.6.1.4.1.529.23.133.1.1.26 | ||
| Enable/disable the tcp command from the terminal server. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| termSrvProfile-TerminalModeConfiguration-TsAraEnabled | 1.3.6.1.4.1.529.23.133.1.1.27 | ||
| TRUE if terminal server users are allowed to intiate async ARA sessions. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| termSrvProfile-TerminalModeConfiguration-RloginOptions-Rlogin | 1.3.6.1.4.1.529.23.133.1.1.28 | ||
| Enable/disable the rlogin command from the terminal server. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| termSrvProfile-TerminalModeConfiguration-RloginOptions-MaxSourcePort | 1.3.6.1.4.1.529.23.133.1.1.29 | ||
| A highest limit of the port number used by rlogin. For BSD's rlogin, the client source port range is 512 to 1023. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| termSrvProfile-TerminalModeConfiguration-RloginOptions-MinSourcePort | 1.3.6.1.4.1.529.23.133.1.1.30 | ||
| A lowest limit of the port number used by rlogin. For BSD's rlogin, the client source port range is 512 to 1023. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| termSrvProfile-TerminalModeConfiguration-TelnetOptions-Telnet | 1.3.6.1.4.1.529.23.133.1.1.31 | ||
| Enable/disable the use of the telnet terminal server command. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| termSrvProfile-TerminalModeConfiguration-TelnetOptions-TelnetMode | 1.3.6.1.4.1.529.23.133.1.1.32 | ||
| Selects default Telnet mode: ASCII, Binary, or Transparent. | |||
| OBJECT-TYPE | |||
| INTEGER | ascii(1), binary(2), transparent(3) | ||
| termSrvProfile-TerminalModeConfiguration-TelnetOptions-AutoTelnet | 1.3.6.1.4.1.529.23.133.1.1.33 | ||
| If set to 'yes' unknown terminal server commands will be treated as the name of a host to telnet to. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| termSrvProfile-TerminalModeConfiguration-TelnetOptions-LocalEcho | 1.3.6.1.4.1.529.23.133.1.1.34 | ||
| Defines the default echo mode for telnet sessions. The default mode can be overridded on the command line. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| termSrvProfile-TerminalModeConfiguration-TelnetOptions-Security | 1.3.6.1.4.1.529.23.133.1.1.35 | ||
| Level of security used to authenticate telnet sessions. | |||
| OBJECT-TYPE | |||
| INTEGER | telnetSecurityNone(1), telnetSecurityGlobal(2), telnetSecurityProfile(3), telnetSecurityAuthSetting(4) | ||
| termSrvProfile-TerminalModeConfiguration-IpAddMsg | 1.3.6.1.4.1.529.23.133.1.1.36 | ||
| This is a text field that will be printed in front of the IP address in the terminal server when going into PPP. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| termSrvProfile-TerminalModeConfiguration-PromptFormat | 1.3.6.1.4.1.529.23.133.1.1.37 | ||
| TRUE if the terminal server prompt should interpret \n. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| termSrvProfile-TerminalModeConfiguration-IpNetmaskMsg | 1.3.6.1.4.1.529.23.133.1.1.38 | ||
| This is a text field that will be printed in front of the IP Netmask in the terminal server when going into SLIP. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| termSrvProfile-TerminalModeConfiguration-IpGwAddMsg | 1.3.6.1.4.1.529.23.133.1.1.39 | ||
| This is a text field that will be printed in front of the IP Gateway address in the terminal server when going into SLIP. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| termSrvProfile-TerminalModeConfiguration-LoginTimeout | 1.3.6.1.4.1.529.23.133.1.1.40 | ||
| The number of seconds to wait at the login prompt for the user to login. A value of 0 disables the timeout. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| termSrvProfile-TerminalModeConfiguration-PacketizeWaitTime | 1.3.6.1.4.1.529.23.133.1.1.41 | ||
| The number of milliseconds to accumulate modem data in a packet. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| termSrvProfile-TerminalModeConfiguration-PacketizeChars | 1.3.6.1.4.1.529.23.133.1.1.42 | ||
| The number of characters to accumulate modem data in a packet. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| termSrvProfile-ImmediateModeOptions-Service | 1.3.6.1.4.1.529.23.133.1.1.43 | ||
| enable/disable immediate mode and specify the service type. Immediate mode is where a user is automatically connected to a remote host using the specified service. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), telnet(2), rawTcp(3), rlogin(4), x25Pad(5), x25T3pos(6) | ||
| termSrvProfile-ImmediateModeOptions-TelnetHostAuth | 1.3.6.1.4.1.529.23.133.1.1.44 | ||
| Option defines if telnet is started directly bypassing the local authentication process. When enabled, authentication is the responsibility of the telnet host. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| termSrvProfile-ImmediateModeOptions-Host | 1.3.6.1.4.1.529.23.133.1.1.45 | ||
| Name or IP address or X.121 address of the immediate TELNET, TCP, or X.25/Pad host to connect to. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| termSrvProfile-ImmediateModeOptions-Port | 1.3.6.1.4.1.529.23.133.1.1.46 | ||
| TCP port to which the TELNET or TCP stream is to be redirected to. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| termSrvProfile-MenuModeOptions-StartWithMenus | 1.3.6.1.4.1.529.23.133.1.1.47 | ||
| Terminal server interface will start in menu mode when this field is 'yes'. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| termSrvProfile-MenuModeOptions-ToggleScreen | 1.3.6.1.4.1.529.23.133.1.1.48 | ||
| When enabled, users are able to toggle between menu mode and the normal terminal server command line. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| termSrvProfile-MenuModeOptions-RemoteConfiguration | 1.3.6.1.4.1.529.23.133.1.1.49 | ||
| When enabled, the text and host addresses that make up the menu will be retrieved from RADIUS (if RADIUS is enabled). | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| termSrvProfile-MenuModeOptions-Text1 | 1.3.6.1.4.1.529.23.133.1.1.50 | ||
| The text to put in the terminal server menu for the first login host when remote configuration isn't available. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| termSrvProfile-MenuModeOptions-Host1 | 1.3.6.1.4.1.529.23.133.1.1.51 | ||
| The address of the first host to access when terminal server menu mode is being used without remote configuration. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| termSrvProfile-MenuModeOptions-Service1 | 1.3.6.1.4.1.529.23.133.1.1.52 | ||
| Type of service required for this selection. | |||
| OBJECT-TYPE | |||
| INTEGER | telnet(1), rlogin(2), ppp(3), rawtcp(4) | ||
| termSrvProfile-MenuModeOptions-Port1 | 1.3.6.1.4.1.529.23.133.1.1.53 | ||
| The port for contacting host. Used only for telnet service. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| termSrvProfile-MenuModeOptions-User1 | 1.3.6.1.4.1.529.23.133.1.1.54 | ||
| The user name for this selection. Used only for rlogin service. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| termSrvProfile-MenuModeOptions-Text2 | 1.3.6.1.4.1.529.23.133.1.1.55 | ||
| The text to put in the terminal server menu for the second login host when remote configuration isn't available. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| termSrvProfile-MenuModeOptions-Host2 | 1.3.6.1.4.1.529.23.133.1.1.56 | ||
| The address of the second host to access when terminal server menu mode is being used without remote configuration. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| termSrvProfile-MenuModeOptions-Service2 | 1.3.6.1.4.1.529.23.133.1.1.57 | ||
| Type of service required for this selection. | |||
| OBJECT-TYPE | |||
| INTEGER | telnet(1), rlogin(2), ppp(3), rawtcp(4) | ||
| termSrvProfile-MenuModeOptions-Port2 | 1.3.6.1.4.1.529.23.133.1.1.58 | ||
| The port for contacting host. Used only for telnet service. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| termSrvProfile-MenuModeOptions-User2 | 1.3.6.1.4.1.529.23.133.1.1.59 | ||
| The user name for this selection. Used only for rlogin service. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| termSrvProfile-MenuModeOptions-Text3 | 1.3.6.1.4.1.529.23.133.1.1.60 | ||
| The text to put in the terminal server menu for the third login host when remote configuration isn't available. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| termSrvProfile-MenuModeOptions-Host3 | 1.3.6.1.4.1.529.23.133.1.1.61 | ||
| The address of the third host to access when terminal server menu mode is being used without remote configuration. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| termSrvProfile-MenuModeOptions-Service3 | 1.3.6.1.4.1.529.23.133.1.1.62 | ||
| Type of service required for this selection. | |||
| OBJECT-TYPE | |||
| INTEGER | telnet(1), rlogin(2), ppp(3), rawtcp(4) | ||
| termSrvProfile-MenuModeOptions-Port3 | 1.3.6.1.4.1.529.23.133.1.1.63 | ||
| The port for contacting host. Used only for telnet service. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| termSrvProfile-MenuModeOptions-User3 | 1.3.6.1.4.1.529.23.133.1.1.64 | ||
| The user name for this selection. Used only for rlogin service. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| termSrvProfile-MenuModeOptions-Text4 | 1.3.6.1.4.1.529.23.133.1.1.65 | ||
| The text to put in the terminal server menu for the forth login host when remote configuration isn't available. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| termSrvProfile-MenuModeOptions-Host4 | 1.3.6.1.4.1.529.23.133.1.1.66 | ||
| The address of the forth host to access when terminal server menu mode is being used without remote configuration. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| termSrvProfile-MenuModeOptions-Service4 | 1.3.6.1.4.1.529.23.133.1.1.67 | ||
| Type of service required for this selection. | |||
| OBJECT-TYPE | |||
| INTEGER | telnet(1), rlogin(2), ppp(3), rawtcp(4) | ||
| termSrvProfile-MenuModeOptions-Port4 | 1.3.6.1.4.1.529.23.133.1.1.68 | ||
| The port for contacting host. Used only for telnet service. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| termSrvProfile-MenuModeOptions-User4 | 1.3.6.1.4.1.529.23.133.1.1.69 | ||
| The user name for this selection. Used only for rlogin service. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| termSrvProfile-MenuModeOptions-MenuSelectionString | 1.3.6.1.4.1.529.23.133.1.1.70 | ||
| The selection string for the menu mode. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| termSrvProfile-PppModeConfiguration-Ppp | 1.3.6.1.4.1.529.23.133.1.1.71 | ||
| Enable/disable the PPP terminal server command. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| termSrvProfile-PppModeConfiguration-Delay | 1.3.6.1.4.1.529.23.133.1.1.72 | ||
| The number of seconds to wait for PPP before putting up the login banner and converting to telnet mode. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| termSrvProfile-PppModeConfiguration-Direct | 1.3.6.1.4.1.529.23.133.1.1.73 | ||
| Option defines if PPP negotiation is started directly after 'PPP' Term Server command is received or, not. When disabled, we wait to receive a PPP packet before sending. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| termSrvProfile-PppModeConfiguration-Info | 1.3.6.1.4.1.529.23.133.1.1.74 | ||
| Enable/Disable the PPP/SLIP start up message. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), modePpp(2), sessionPpp(3) | ||
| termSrvProfile-SlipModeConfiguration-Slip | 1.3.6.1.4.1.529.23.133.1.1.75 | ||
| Enable/disable the SLIP command from the terminal server. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| termSrvProfile-SlipModeConfiguration-SlipBootp | 1.3.6.1.4.1.529.23.133.1.1.76 | ||
| Enable/disable the SLIP command from the terminal server. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| termSrvProfile-SlipModeConfiguration-Info | 1.3.6.1.4.1.529.23.133.1.1.77 | ||
| Level of information displayed in SLIP start up message. | |||
| OBJECT-TYPE | |||
| INTEGER | basicSlip(1), advancedSlip(2) | ||
| termSrvProfile-SlipModeConfiguration-CslipAutoDetect | 1.3.6.1.4.1.529.23.133.1.1.78 | ||
| Enable/disbale auto detecting of SLIP header compression. This feature will try to auto-detect if the caller is using Van Jacobson header compression, and if so, the box will automatically switch to CSLIP mode. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| termSrvProfile-DialoutConfiguration-Enabled | 1.3.6.1.4.1.529.23.133.1.1.79 | ||
| Allow/disallow modem outdial from the terminal server. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| termSrvProfile-DialoutConfiguration-DirectAccess | 1.3.6.1.4.1.529.23.133.1.1.80 | ||
| Allows direct connection to a modem by TELNETing to a configurable modem port. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| termSrvProfile-DialoutConfiguration-PortForDirectAccess | 1.3.6.1.4.1.529.23.133.1.1.81 | ||
| The telnet port number for direct access to a modem. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| termSrvProfile-DialoutConfiguration-PasswordForDirectAccess | 1.3.6.1.4.1.529.23.133.1.1.82 | ||
| The password that must be used to gain direct access to a modem | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| termSrvProfile-DialoutConfiguration-SecurityForDirectAccess | 1.3.6.1.4.1.529.23.133.1.1.83 | ||
| The security method used to control direct modem access. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), global(2), user(3) | ||
| termSrvProfile-Action-o | 1.3.6.1.4.1.529.23.133.1.1.84 | ||
| OBJECT-TYPE | |||
| INTEGER | noAction(1), createProfile(2), deleteProfile(3) | ||
| termSrvProfile-ModemConfiguration-ModemOnHoldTimeout | 1.3.6.1.4.1.529.23.133.1.1.85 | ||
| The allowable Modem-on-Hold timeout values. | |||
| OBJECT-TYPE | |||
| INTEGER | mohDisabled(1), n-10SecMohTimeout(2), n-20SecMohTimeout(3), n-30SecMohTimeout(4), n-40SecMohTimeout(5), n-1MinMohTimeout(6), n-2MinMohTimeout(7), n-3MinMohTimeout(8), n-4MinMohTimeout(9), n-6MinMohTimeout(10), n-8MinMohTimeout(11), n-12MinMohTimeout(12), n-16MinMohTimeout(13), noLimitMohTimeout(14), connProfileUseGlobal(15) | ||
| termSrvProfile-ModemConfiguration-QuickConnectEnabled | 1.3.6.1.4.1.529.23.133.1.1.86 | ||
| If set to yes, Quick-Connect will be enabled. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| termSrvProfile-ModemConfiguration-MaxV92ReceiveBaudRate | 1.3.6.1.4.1.529.23.133.1.1.87 | ||
| The maximum V.92 receive baud rate to be attempted by the modems. | |||
| OBJECT-TYPE | |||
| INTEGER | n-48000MaxV92Baud(1), n-46667MaxV92Baud(2), n-45333MaxV92Baud(3), n-44000MaxV92Baud(4), n-42667MaxV92Baud(5), n-41333MaxV92Baud(6), n-40000MaxV92Baud(7), n-38667MaxV92Baud(8), n-37333MaxV92Baud(9), n-36000MaxV92Baud(10), n-34667MaxV92Baud(11), n-33333MaxV92Baud(12), n-32000MaxV92Baud(13), n-30667MaxV92Baud(14), n-29333MaxV92Baud(15), n-28000MaxV92Baud(16), n-26667MaxV92Baud(17), n-25333MaxV92Baud(18), n-24000MaxV92Baud(19) | ||
| termSrvProfile-ModemConfiguration-V44Enabled | 1.3.6.1.4.1.529.23.133.1.1.88 | ||
| If set to yes, allow V.44 compression to be negotiated | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| DisplayString | |||
| OCTET STRING | |||
| MibtermSrvProfileEntry | |||
| SEQUENCE | |||
| INTEGER as termSrvProfile-Index-o | |||
| INTEGER as termSrvProfile-Enabled | |||
| INTEGER as termSrvProfile-SecurityMode | |||
| INTEGER as termSrvProfile-ModemConfiguration-V42-mnp | |||
| INTEGER as termSrvProfile-ModemConfiguration-MaxBaudRate | |||
| INTEGER as termSrvProfile-ModemConfiguration-ModemTransmitLevel | |||
| INTEGER as termSrvProfile-ModemConfiguration-CellModeFirst | |||
| INTEGER as termSrvProfile-ModemConfiguration-CellLevel | |||
| INTEGER as termSrvProfile-ModemConfiguration-o7Even | |||
| INTEGER as termSrvProfile-ModemConfiguration-ModemMod | |||
| DisplayString as termSrvProfile-ModemConfiguration-oATAnswerString | |||
| INTEGER as termSrvProfile-ModemConfiguration-ModemOnHoldTimeout | |||
| INTEGER as termSrvProfile-ModemConfiguration-QuickConnectEnabled | |||
| INTEGER as termSrvProfile-ModemConfiguration-MaxV92ReceiveBaudRate | |||
| INTEGER as termSrvProfile-ModemConfiguration-V44Enabled | |||
| INTEGER as termSrvProfile-TerminalModeConfiguration-SilentMode | |||
| INTEGER as termSrvProfile-TerminalModeConfiguration-ClearScreen | |||
| DisplayString as termSrvProfile-TerminalModeConfiguration-SystemPassword | |||
| DisplayString as termSrvProfile-TerminalModeConfiguration-Banner | |||
| DisplayString as termSrvProfile-TerminalModeConfiguration-LoginPrompt | |||
| DisplayString as termSrvProfile-TerminalModeConfiguration-PasswordPrompt | |||
| DisplayString as termSrvProfile-TerminalModeConfiguration-ThirdLoginPrompt | |||
| INTEGER as termSrvProfile-TerminalModeConfiguration-ThirdPromptSequence | |||
| DisplayString as termSrvProfile-TerminalModeConfiguration-Prompt | |||
| DisplayString as termSrvProfile-TerminalModeConfiguration-TerminalType | |||
| INTEGER as termSrvProfile-TerminalModeConfiguration-ClearCall | |||
| INTEGER as termSrvProfile-TerminalModeConfiguration-BufferChars | |||
| INTEGER as termSrvProfile-TerminalModeConfiguration-Ping | |||
| INTEGER as termSrvProfile-TerminalModeConfiguration-Traceroute | |||
| INTEGER as termSrvProfile-TerminalModeConfiguration-Tcp | |||
| INTEGER as termSrvProfile-TerminalModeConfiguration-TsAraEnabled | |||
| INTEGER as termSrvProfile-TerminalModeConfiguration-RloginOptions-Rlogin | |||
| INTEGER as termSrvProfile-TerminalModeConfiguration-RloginOptions-MaxSourcePort | |||
| INTEGER as termSrvProfile-TerminalModeConfiguration-RloginOptions-MinSourcePort | |||
| INTEGER as termSrvProfile-TerminalModeConfiguration-TelnetOptions-Telnet | |||
| INTEGER as termSrvProfile-TerminalModeConfiguration-TelnetOptions-TelnetMode | |||
| INTEGER as termSrvProfile-TerminalModeConfiguration-TelnetOptions-AutoTelnet | |||
| INTEGER as termSrvProfile-TerminalModeConfiguration-TelnetOptions-LocalEcho | |||
| INTEGER as termSrvProfile-TerminalModeConfiguration-TelnetOptions-Security | |||
| DisplayString as termSrvProfile-TerminalModeConfiguration-IpAddMsg | |||
| INTEGER as termSrvProfile-TerminalModeConfiguration-PromptFormat | |||
| DisplayString as termSrvProfile-TerminalModeConfiguration-IpNetmaskMsg | |||
| DisplayString as termSrvProfile-TerminalModeConfiguration-IpGwAddMsg | |||
| INTEGER as termSrvProfile-TerminalModeConfiguration-LoginTimeout | |||
| INTEGER as termSrvProfile-TerminalModeConfiguration-PacketizeWaitTime | |||
| INTEGER as termSrvProfile-TerminalModeConfiguration-PacketizeChars | |||
| INTEGER as termSrvProfile-ImmediateModeOptions-Service | |||
| INTEGER as termSrvProfile-ImmediateModeOptions-TelnetHostAuth | |||
| DisplayString as termSrvProfile-ImmediateModeOptions-Host | |||
| INTEGER as termSrvProfile-ImmediateModeOptions-Port | |||
| INTEGER as termSrvProfile-MenuModeOptions-StartWithMenus | |||
| INTEGER as termSrvProfile-MenuModeOptions-ToggleScreen | |||
| INTEGER as termSrvProfile-MenuModeOptions-RemoteConfiguration | |||
| DisplayString as termSrvProfile-MenuModeOptions-Text1 | |||
| DisplayString as termSrvProfile-MenuModeOptions-Host1 | |||
| INTEGER as termSrvProfile-MenuModeOptions-Service1 | |||
| INTEGER as termSrvProfile-MenuModeOptions-Port1 | |||
| DisplayString as termSrvProfile-MenuModeOptions-User1 | |||
| DisplayString as termSrvProfile-MenuModeOptions-Text2 | |||
| DisplayString as termSrvProfile-MenuModeOptions-Host2 | |||
| INTEGER as termSrvProfile-MenuModeOptions-Service2 | |||
| INTEGER as termSrvProfile-MenuModeOptions-Port2 | |||
| DisplayString as termSrvProfile-MenuModeOptions-User2 | |||
| DisplayString as termSrvProfile-MenuModeOptions-Text3 | |||
| DisplayString as termSrvProfile-MenuModeOptions-Host3 | |||
| INTEGER as termSrvProfile-MenuModeOptions-Service3 | |||
| INTEGER as termSrvProfile-MenuModeOptions-Port3 | |||
| DisplayString as termSrvProfile-MenuModeOptions-User3 | |||
| DisplayString as termSrvProfile-MenuModeOptions-Text4 | |||
| DisplayString as termSrvProfile-MenuModeOptions-Host4 | |||
| INTEGER as termSrvProfile-MenuModeOptions-Service4 | |||
| INTEGER as termSrvProfile-MenuModeOptions-Port4 | |||
| DisplayString as termSrvProfile-MenuModeOptions-User4 | |||
| DisplayString as termSrvProfile-MenuModeOptions-MenuSelectionString | |||
| INTEGER as termSrvProfile-PppModeConfiguration-Ppp | |||
| INTEGER as termSrvProfile-PppModeConfiguration-Delay | |||
| INTEGER as termSrvProfile-PppModeConfiguration-Direct | |||
| INTEGER as termSrvProfile-PppModeConfiguration-Info | |||
| INTEGER as termSrvProfile-SlipModeConfiguration-Slip | |||
| INTEGER as termSrvProfile-SlipModeConfiguration-SlipBootp | |||
| INTEGER as termSrvProfile-SlipModeConfiguration-Info | |||
| INTEGER as termSrvProfile-SlipModeConfiguration-CslipAutoDetect | |||
| INTEGER as termSrvProfile-DialoutConfiguration-Enabled | |||
| INTEGER as termSrvProfile-DialoutConfiguration-DirectAccess | |||
| INTEGER as termSrvProfile-DialoutConfiguration-PortForDirectAccess | |||
| DisplayString as termSrvProfile-DialoutConfiguration-PasswordForDirectAccess | |||
| INTEGER as termSrvProfile-DialoutConfiguration-SecurityForDirectAccess | |||
| INTEGER as termSrvProfile-Action-o | |||