
| ASCEND-MIB | RFC1155-SMI | RFC-1212 |
| configuration | IpAddress | OBJECT-TYPE |
| mibx25Profile | 1.3.6.1.4.1.529.23.140 | ||
| OBJECT IDENTIFIER | |||
| mibx25ProfileTable | 1.3.6.1.4.1.529.23.140.1 | ||
| A list of mibx25Profile profile entries. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Mibx25ProfileEntry | |||
| mibx25ProfileEntry | 1.3.6.1.4.1.529.23.140.1.1 | ||
| A mibx25Profile entry containing objects that maps to the parameters of mibx25Profile profile. | |||
| OBJECT-TYPE | |||
| Mibx25ProfileEntry | |||
| x25Profile-X25Name | 1.3.6.1.4.1.529.23.140.1.1.1 | ||
| Name of the X.25 profile. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| x25Profile-Active | 1.3.6.1.4.1.529.23.140.1.1.2 | ||
| Indicates whether this profile is to be included in the X.25 table. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| x25Profile-Kludge | 1.3.6.1.4.1.529.23.140.1.1.3 | ||
| This is a kludge to indicate that the physical line is to be brought down before connecting. It is also used for outsequence on a reset. This byte formally a fill. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| x25Profile-NailedUpGroup | 1.3.6.1.4.1.529.23.140.1.1.4 | ||
| Specifies the nailed group number. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| x25Profile-NailedMode | 1.3.6.1.4.1.529.23.140.1.1.5 | ||
| Specifies whether it is a nailed or switched. | |||
| OBJECT-TYPE | |||
| INTEGER | off(1), ft1(2), ft1Mpp(3), bri(4), ft1Bo(5), dChan(6), aodi(7), megamax(8) | ||
| x25Profile-CalledNumberType | 1.3.6.1.4.1.529.23.140.1.1.6 | ||
| Indication of whether national national number, international number, etc. is specified. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| x25Profile-SwitchedCallType | 1.3.6.1.4.1.529.23.140.1.1.7 | ||
| Type of bearer channel capability to set up for each switched call in the session. | |||
| OBJECT-TYPE | |||
| INTEGER | voice(1), n-56kRestricted(2), n-64kClear(3), n-64kRestricted(4), n-56kClear(5), n-384kRestricted(6), n-384kClear(7), n-1536kClear(8), n-1536kRestricted(9), n-128kClear(10), n-192kClear(11), n-256kClear(12), n-320kClear(13), dws384Clear(14), n-448Clear(15), n-512Clear(16), n-576Clear(17), n-640Clear(18), n-704Clear(19), n-768Clear(20), n-832Clear(21), n-896Clear(22), n-960Clear(23), n-1024Clear(24), n-1088Clear(25), n-1152Clear(26), n-1216Clear(27), n-1280Clear(28), n-1344Clear(29), n-1408Clear(30), n-1472Clear(31), n-1600Clear(32), n-1664Clear(33), n-1728Clear(34), n-1792Clear(35), n-1856Clear(36), n-1920Clear(37), x30RestrictedBearer(39), v110ClearBearer(40), n-64kX30Restricted(41), n-56kV110Clear(42), modem(43), atmodem(44), n-2456kV110(46), n-4856kV110(47), n-9656kV110(48), n-19256kV110(49), n-38456kV110(50), n-2456krV110(51), n-4856krV110(52), n-9656krV110(53), n-19256krV110(54), n-38456krV110(55), n-2464kV110(56), n-4864kV110(57), n-9664kV110(58), n-19264kV110(59), n-38464kV110(60), n-2464krV110(61), n-4864krV110(62), n-9664krV110(63), n-19264krV110(64), n-38464krV110(65), v32(66), phs64k(67), voiceOverIp(68), atmSvc(70), frameRelaySvc(71), vpnTunnel(72), wormarq(73), n-14456kV110(74), n-28856kV110(75), n-14456krV110(76), n-28856krV110(77), n-14464kV110(78), n-28864kV110(79), n-14464krV110(80), n-28864krV110(81), modem31khzAudio(82), x25Svc(83), n-144kClear(255), iptoip(263) | ||
| x25Profile-PhoneNumber | 1.3.6.1.4.1.529.23.140.1.1.8 | ||
| The phonenumber of the named host. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| x25Profile-BillingNumber | 1.3.6.1.4.1.529.23.140.1.1.9 | ||
| A number used for billing purposes. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| x25Profile-TransitNumber | 1.3.6.1.4.1.529.23.140.1.1.10 | ||
| The string for use in the 'transit network ie' for PRI calling when going through a LEC. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| x25Profile-CallByCallId | 1.3.6.1.4.1.529.23.140.1.1.11 | ||
| Id for the call-by-call signalling for PRI. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| x25Profile-oT1Val | 1.3.6.1.4.1.529.23.140.1.1.12 | ||
| The time interval during which the LAPB shall expect to receive an acknowledgment to an outstanding I PDU or an expected response to a sent unnumbered PDU. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| x25Profile-oT2Val | 1.3.6.1.4.1.529.23.140.1.1.13 | ||
| The maximum delay at LAPB before transmitting a delayed RR. This must be considerably less than T1 the Acknowledgment Timer value. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| x25Profile-oN2Val | 1.3.6.1.4.1.529.23.140.1.1.14 | ||
| Maximum number of times that a PDU is sent following the expiry of the Acknowledgment Timer. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| x25Profile-KVal | 1.3.6.1.4.1.529.23.140.1.1.15 | ||
| LAPB Window size specifying the number of unacknowledged I PDUs which may be sent. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| x25Profile-oPktWindow | 1.3.6.1.4.1.529.23.140.1.1.16 | ||
| X.25 Packet Window size. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| x25Profile-oPktSize | 1.3.6.1.4.1.529.23.140.1.1.17 | ||
| X.25 default Packet size. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| x25Profile-oMinPktSize | 1.3.6.1.4.1.529.23.140.1.1.18 | ||
| X.25 log base 2 of min packet size in negotiation. | |||
| OBJECT-TYPE | |||
| INTEGER | n-6(7), n-7(8), n-8(9), n-9(10), n-10(11), n-11(12), n-12(13) | ||
| x25Profile-oMaxPktSize | 1.3.6.1.4.1.529.23.140.1.1.19 | ||
| Maximum X.25 Packet size which will be negotiated on calls. | |||
| OBJECT-TYPE | |||
| INTEGER | n-6(7), n-7(8), n-8(9), n-9(10), n-10(11), n-11(12), n-12(13) | ||
| x25Profile-LowestPVC | 1.3.6.1.4.1.529.23.140.1.1.20 | ||
| X.25 logical channel number assigned to the lowest PVC. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| x25Profile-HighestPVC | 1.3.6.1.4.1.529.23.140.1.1.21 | ||
| X.25 logical channel number assigned to the highest PVC. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| x25Profile-LowestSVC | 1.3.6.1.4.1.529.23.140.1.1.22 | ||
| X.25 logical channel number assigned to the lowest SVC. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| x25Profile-HighestSVC | 1.3.6.1.4.1.529.23.140.1.1.23 | ||
| X.25 logical channel number assigned to the highest SVC. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| x25Profile-ClearDiag | 1.3.6.1.4.1.529.23.140.1.1.24 | ||
| X.25 Clear request has DIAG. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| x25Profile-ResetDiag | 1.3.6.1.4.1.529.23.140.1.1.25 | ||
| X.25 reset request has DIAG. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| x25Profile-RestartDiag | 1.3.6.1.4.1.529.23.140.1.1.26 | ||
| X.25 restart request has DIAG. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| x25Profile-PktOptions | 1.3.6.1.4.1.529.23.140.1.1.27 | ||
| X.25 packet level options. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), npws(2), afna(3), npwsAfna(4) | ||
| x25Profile-PktT20 | 1.3.6.1.4.1.529.23.140.1.1.28 | ||
| X.25 restart request response timer. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| x25Profile-PktR20 | 1.3.6.1.4.1.529.23.140.1.1.29 | ||
| Number of times an X.25 restart request will be retried. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| x25Profile-PktT21 | 1.3.6.1.4.1.529.23.140.1.1.30 | ||
| X.25 call request response timer. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| x25Profile-PktT22 | 1.3.6.1.4.1.529.23.140.1.1.31 | ||
| X.25 reset request response timer. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| x25Profile-PktR22 | 1.3.6.1.4.1.529.23.140.1.1.32 | ||
| Number of times an X.25 reset request will be retried. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| x25Profile-PktT23 | 1.3.6.1.4.1.529.23.140.1.1.33 | ||
| X.25 clear request response timer. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| x25Profile-PktR23 | 1.3.6.1.4.1.529.23.140.1.1.34 | ||
| Number of times an X.25 clear request will be retried. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| x25Profile-DteFlag | 1.3.6.1.4.1.529.23.140.1.1.36 | ||
| Indicates the DTE/DCE nature of the X.25 protocol. | |||
| OBJECT-TYPE | |||
| INTEGER | dce(1), dte(2) | ||
| x25Profile-NetType | 1.3.6.1.4.1.529.23.140.1.1.37 | ||
| Net Type Enum | |||
| OBJECT-TYPE | |||
| INTEGER | ccitt(1), ddn(2) | ||
| x25Profile-oDiscMode | 1.3.6.1.4.1.529.23.140.1.1.38 | ||
| Disc Mode: Active or passive | |||
| OBJECT-TYPE | |||
| INTEGER | passive(1), active(2) | ||
| x25Profile-oSeqNumbers | 1.3.6.1.4.1.529.23.140.1.1.39 | ||
| Sequence numbers mode: normal or extended | |||
| OBJECT-TYPE | |||
| INTEGER | normal(1), extended(2) | ||
| x25Profile-ReverseChargeAcceptance | 1.3.6.1.4.1.529.23.140.1.1.40 | ||
| Reverse Charge Acceptance if set permits the use of reverse charges on Incoming Call packets. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| x25Profile-oVceTimerVal | 1.3.6.1.4.1.529.23.140.1.1.41 | ||
| Virtual Call Establishment Timer Interval: number of seconds to maintain a connection to a character oriented device that has not established a virtual call. A value of 0 disables the timer box-wide | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| x25Profile-oX25DTeiValue | 1.3.6.1.4.1.529.23.140.1.1.42 | ||
| TEI to be used when D-channel X.25 | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| x25Profile-oPriNumberValue | 1.3.6.1.4.1.529.23.140.1.1.43 | ||
| Phone number to be used for BAP | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| x25Profile-Action-o | 1.3.6.1.4.1.529.23.140.1.1.44 | ||
| OBJECT-TYPE | |||
| INTEGER | noAction(1), createProfile(2), deleteProfile(3) | ||
| x25Profile-IdleVal | 1.3.6.1.4.1.529.23.140.1.1.45 | ||
| Timer used to poll the the remote LAPB when there is no activity on the link to ensure the remote station is still alive. A value of zero disables this function. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| x25Profile-Maxwinsize | 1.3.6.1.4.1.529.23.140.1.1.46 | ||
| Maximum X.25 Window size which will be negotiated on calls. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| x25Profile-Defwinsize | 1.3.6.1.4.1.529.23.140.1.1.47 | ||
| Default X.25 Window size to use if not specified during call establishment. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| x25Profile-Defpktsize | 1.3.6.1.4.1.529.23.140.1.1.48 | ||
| Default X.25 Packet size to use if not specified during call establishment. | |||
| OBJECT-TYPE | |||
| INTEGER | n-6(7), n-7(8), n-8(9), n-9(10), n-10(11), n-11(12), n-12(13) | ||
| x25Profile-Pktdiag | 1.3.6.1.4.1.529.23.140.1.1.49 | ||
| Incoming Restart, Clear and Reset Indications will contain the diagnostic byte | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| x25Profile-X25SrcAddress | 1.3.6.1.4.1.529.23.140.1.1.50 | ||
| X.25 source address | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| x25Profile-ClosedUserGroups | 1.3.6.1.4.1.529.23.140.1.1.51 | ||
| Type of Closed User Group facilities subscribed to. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), noiob(2), noioe(3), prefb(4), prefe(5), oab(6), oae(7) | ||
| DisplayString | |||
| OCTET STRING | |||
| Mibx25ProfileEntry | |||
| SEQUENCE | |||
| DisplayString as x25Profile-X25Name | |||
| INTEGER as x25Profile-Active | |||
| INTEGER as x25Profile-Kludge | |||
| INTEGER as x25Profile-NailedUpGroup | |||
| INTEGER as x25Profile-NailedMode | |||
| INTEGER as x25Profile-CalledNumberType | |||
| INTEGER as x25Profile-SwitchedCallType | |||
| DisplayString as x25Profile-PhoneNumber | |||
| DisplayString as x25Profile-BillingNumber | |||
| DisplayString as x25Profile-TransitNumber | |||
| INTEGER as x25Profile-CallByCallId | |||
| INTEGER as x25Profile-oT1Val | |||
| INTEGER as x25Profile-oT2Val | |||
| INTEGER as x25Profile-oN2Val | |||
| INTEGER as x25Profile-KVal | |||
| INTEGER as x25Profile-IdleVal | |||
| INTEGER as x25Profile-oPktWindow | |||
| INTEGER as x25Profile-Maxwinsize | |||
| INTEGER as x25Profile-Defwinsize | |||
| INTEGER as x25Profile-oPktSize | |||
| INTEGER as x25Profile-oMinPktSize | |||
| INTEGER as x25Profile-Defpktsize | |||
| INTEGER as x25Profile-oMaxPktSize | |||
| INTEGER as x25Profile-LowestPVC | |||
| INTEGER as x25Profile-HighestPVC | |||
| INTEGER as x25Profile-LowestSVC | |||
| INTEGER as x25Profile-HighestSVC | |||
| INTEGER as x25Profile-ClearDiag | |||
| INTEGER as x25Profile-ResetDiag | |||
| INTEGER as x25Profile-RestartDiag | |||
| INTEGER as x25Profile-Pktdiag | |||
| INTEGER as x25Profile-PktOptions | |||
| INTEGER as x25Profile-PktT20 | |||
| INTEGER as x25Profile-PktR20 | |||
| INTEGER as x25Profile-PktT21 | |||
| INTEGER as x25Profile-PktT22 | |||
| INTEGER as x25Profile-PktR22 | |||
| INTEGER as x25Profile-PktT23 | |||
| INTEGER as x25Profile-PktR23 | |||
| DisplayString as x25Profile-X25SrcAddress | |||
| INTEGER as x25Profile-DteFlag | |||
| INTEGER as x25Profile-NetType | |||
| INTEGER as x25Profile-oDiscMode | |||
| INTEGER as x25Profile-oSeqNumbers | |||
| INTEGER as x25Profile-ReverseChargeAcceptance | |||
| INTEGER as x25Profile-ClosedUserGroups | |||
| INTEGER as x25Profile-oVceTimerVal | |||
| INTEGER as x25Profile-oX25DTeiValue | |||
| DisplayString as x25Profile-oPriNumberValue | |||
| INTEGER as x25Profile-Action-o | |||