
| RFC1213-MIB | RFC1155-SMI | RFC-1212 |
| DisplayString | enterprises | Counter |
| IpAddress | OBJECT-TYPE |
| atmForum | 1.3.6.1.4.1.353 | ||
| OBJECT IDENTIFIER | |||
| atmForumAdmin | 1.3.6.1.4.1.353.1 | ||
| OBJECT IDENTIFIER | |||
| atmfTransmissionTypes | 1.3.6.1.4.1.353.1.2 | ||
| OBJECT IDENTIFIER | |||
| atmfUnknownType | 1.3.6.1.4.1.353.1.2.1 | ||
| OBJECT IDENTIFIER | |||
| atmfSonetSTS3c | 1.3.6.1.4.1.353.1.2.2 | ||
| OBJECT IDENTIFIER | |||
| atmfDs3 | 1.3.6.1.4.1.353.1.2.3 | ||
| OBJECT IDENTIFIER | |||
| atmf4B5B | 1.3.6.1.4.1.353.1.2.4 | ||
| OBJECT IDENTIFIER | |||
| atmf8B10B | 1.3.6.1.4.1.353.1.2.5 | ||
| OBJECT IDENTIFIER | |||
| atmfMediaTypes | 1.3.6.1.4.1.353.1.3 | ||
| OBJECT IDENTIFIER | |||
| atmfMediaUnknownType | 1.3.6.1.4.1.353.1.3.1 | ||
| OBJECT IDENTIFIER | |||
| atmfMediaCoaxCable | 1.3.6.1.4.1.353.1.3.2 | ||
| OBJECT IDENTIFIER | |||
| atmfMediaSingleMode | 1.3.6.1.4.1.353.1.3.3 | ||
| OBJECT IDENTIFIER | |||
| atmfMediaMultiMode | 1.3.6.1.4.1.353.1.3.4 | ||
| OBJECT IDENTIFIER | |||
| atmfMediaStp | 1.3.6.1.4.1.353.1.3.5 | ||
| OBJECT IDENTIFIER | |||
| atmfMediaUtp | 1.3.6.1.4.1.353.1.3.6 | ||
| OBJECT IDENTIFIER | |||
| atmfTrafficDescrTypes | 1.3.6.1.4.1.353.1.4 | ||
| OBJECT IDENTIFIER | |||
| atmfNoDescriptor | 1.3.6.1.4.1.353.1.4.1 | ||
| OBJECT IDENTIFIER | |||
| atmfPeakRate | 1.3.6.1.4.1.353.1.4.2 | ||
| OBJECT IDENTIFIER | |||
| atmfNoClpNoScr | 1.3.6.1.4.1.353.1.4.3 | ||
| OBJECT IDENTIFIER | |||
| atmfClpNoTaggingNoScr | 1.3.6.1.4.1.353.1.4.4 | ||
| OBJECT IDENTIFIER | |||
| atmfClpTaggingNoScr | 1.3.6.1.4.1.353.1.4.5 | ||
| OBJECT IDENTIFIER | |||
| atmfNoClpScr | 1.3.6.1.4.1.353.1.4.6 | ||
| OBJECT IDENTIFIER | |||
| atmfClpNoTaggingScr | 1.3.6.1.4.1.353.1.4.7 | ||
| OBJECT IDENTIFIER | |||
| atmfClpTaggingScr | 1.3.6.1.4.1.353.1.4.8 | ||
| OBJECT IDENTIFIER | |||
| atmForumUni | 1.3.6.1.4.1.353.2 | ||
| OBJECT IDENTIFIER | |||
| atmfPhysicalGroup | 1.3.6.1.4.1.353.2.1 | ||
| OBJECT IDENTIFIER | |||
| atmfPortTable | 1.3.6.1.4.1.353.2.1.1 | ||
| A table of physical layer status and parameter information for the UNI's physical interface. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AtmfPortEntry | |||
| atmfPortEntry | 1.3.6.1.4.1.353.2.1.1.1 | ||
| An entry in the table, containing information about the physical layer of a UNI interface. | |||
| OBJECT-TYPE | |||
| AtmfPortEntry | |||
| atmfPortIndex | 1.3.6.1.4.1.353.2.1.1.1.1 | ||
| A unique value which identifies this port. The value of 0 has the special meaning of identifying the local UNI. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2147483647 | ||
| atmfPortAddress | 1.3.6.1.4.1.353.2.1.1.1.2 | ||
| This object should not be implemented except as required for backward compatibility with version 2.0 of the UNI specification. The Address Group, defined as part of the separate Address Registration MIB should be used instead. | |||
| OBJECT-TYPE | |||
| AtmAddress | |||
| atmfPortTransmissionType | 1.3.6.1.4.1.353.2.1.1.1.3 | ||
| The transmission type of this port. For example, for a port using the Sonet STS-3c physical layer at 155.52 Mbs, this object would have the Object Identifier value: atmfSonetSTS3c. | |||
| OBJECT-TYPE | |||
| OBJECT IDENTIFIER | |||
| atmfPortMediaType | 1.3.6.1.4.1.353.2.1.1.1.4 | ||
| The type of media being used on this port. For example, for a port using coaxial cable, this object would have the Object Identifier value: atmfMediaCoaxCable. | |||
| OBJECT-TYPE | |||
| OBJECT IDENTIFIER | |||
| atmfPortOperStatus | 1.3.6.1.4.1.353.2.1.1.1.5 | ||
| The operational (i.e., actual) state of this port. The ILMI should not alarm on a physical interface for when the value of this object is outOfService(3). This capability is useful if equipment is to be disconnected, or for troubleshooting purposes. A value of loopBack(4) indicates that a local loopback is in place. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), inService(2), outOfService(3), loopBack(4) | ||
| atmfPortSpecific | 1.3.6.1.4.1.353.2.1.1.1.6 | ||
| This object 'points' to additional transmission and/or media specific information relating to this port. In particular, this object's value is the name of a specific instance of the first columnar object of a MIB table with such additional information, where the specific instance is the one which corresponds to this port. For example, for a DS3 interface, this object would contain the value, as defined in RFC 1407: dsx3LineIndex.i where i would be the integer value uniquely identifying the DS3 interface corresponding to this port. If no additional transmission and/or media specific information is available, this object has the value { 0 0 }. | |||
| OBJECT-TYPE | |||
| OBJECT IDENTIFIER | |||
| atmfPortMyIfName | 1.3.6.1.4.1.353.2.1.1.1.7 | ||
| A textual name of this interface. If this systme is manageable through SNMP, and supports the object ifName, the value of this object must be identical with that of ifName for the ifEntry of the lowest level physical interface for this port. This interface must be uniquely names on this system to distinguish parallel links with a neighboring system. If this interface does not have a textual name, the value of this object is a zero length string. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| atmfMyIpNmAddress | 1.3.6.1.4.1.353.2.1.2 | ||
| An IP Address to which a Network Management Station can send Network Management protocol, e.g. SNMP messages to UDP port 161, in order to access network management information concerning the operation of the ATM devide local to this UME. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| atmfAtmLayerGroup | 1.3.6.1.4.1.353.2.2 | ||
| OBJECT IDENTIFIER | |||
| atmfAtmLayerTable | 1.3.6.1.4.1.353.2.2.1 | ||
| A table of ATM layer status and parameter information for the UNI's physical interface. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AtmfAtmLayerEntry | |||
| atmfAtmLayerEntry | 1.3.6.1.4.1.353.2.2.1.1 | ||
| An entry in the table, containing information about the ATM layer of a UNI interface. | |||
| OBJECT-TYPE | |||
| AtmfAtmLayerEntry | |||
| atmfAtmLayerIndex | 1.3.6.1.4.1.353.2.2.1.1.1 | ||
| The unique value which identifies the UNI port. The value of 0 has the special meaning of identifying the local UNI. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2147483647 | ||
| atmfAtmLayerMaxVPCs | 1.3.6.1.4.1.353.2.2.1.1.2 | ||
| The maximum number of switched and permanent VPCs supported on this UNI. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| atmfAtmLayerMaxVCCs | 1.3.6.1.4.1.353.2.2.1.1.3 | ||
| The maximum number of switched and permanent VCCs supported on this UNI. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..16777215 | ||
| atmfAtmLayerConfiguredVPCs | 1.3.6.1.4.1.353.2.2.1.1.4 | ||
| The number of permanent VPCs configured for use on this UNI. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| atmfAtmLayerConfiguredVCCs | 1.3.6.1.4.1.353.2.2.1.1.5 | ||
| The number of permanent VCCs configured for use on this UNI. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..16777215 | ||
| atmfAtmLayerMaxVpiBits | 1.3.6.1.4.1.353.2.2.1.1.6 | ||
| The number of active VPI bits on this interface. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..8 | ||
| atmfAtmLayerMaxVciBits | 1.3.6.1.4.1.353.2.2.1.1.7 | ||
| The number of active VCI bits on this interface. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..16 | ||
| atmfAtmLayerUniType | 1.3.6.1.4.1.353.2.2.1.1.8 | ||
| The type of the ATM UNI, either public or private. | |||
| OBJECT-TYPE | |||
| INTEGER | public(1), private(2) | ||
| atmfAtmLayerUniVersion | 1.3.6.1.4.1.353.2.2.1.1.9 | ||
| An indication of the latest version of the ATM Forum UNI Specification that is supported on this UNI. If this value is not present, a version of the UNI earlier than 3.1 is supported. If a value greated than version3point1 is persent, then UNI 3.1 communication should be attempt. If the peer UNE's value of this object is the same as, or later than the local UME's value, then the version corresponding to the local UME's value should be attempted. Otherwise, if the peer UME's value of this object is earlier, and supported locally, then the local UME should attempt the version corresponding to the peer UME's value. Otherwise, compatability of the two UMEs cannot be assumed. | |||
| OBJECT-TYPE | |||
| INTEGER | version2point0(1), version3point0(2), version3point1(3) | ||
| atmfAtmStatsGroup | 1.3.6.1.4.1.353.2.3 | ||
| OBJECT IDENTIFIER | |||
| atmfAtmStatsTable | 1.3.6.1.4.1.353.2.3.1 | ||
| A table of ATM layer statistics information for the UNI's physical interface. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AtmfAtmStatsEntry | |||
| atmfAtmStatsEntry | 1.3.6.1.4.1.353.2.3.1.1 | ||
| An entry in the table, containing statistics for the ATM layer of a UNI interface. | |||
| OBJECT-TYPE | |||
| AtmfAtmStatsEntry | |||
| atmfAtmStatsIndex | 1.3.6.1.4.1.353.2.3.1.1.1 | ||
| The unique value which identifies the UNI port. The value of 0 has the special meaning of identifying the local UNI. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2147483647 | ||
| atmfAtmStatsReceivedCells | 1.3.6.1.4.1.353.2.3.1.1.2 | ||
| The accumulated number of ATM cells received on this UNI which were assigned and not dropped. | |||
| OBJECT-TYPE | |||
| Counter | |||
| atmfAtmStatsDroppedReceivedCells | 1.3.6.1.4.1.353.2.3.1.1.3 | ||
| The accumulated number of ATM cells which were dropped for the reasons defined in section 4.4.4.2. | |||
| OBJECT-TYPE | |||
| Counter | |||
| atmfAtmStatsTransmittedCells | 1.3.6.1.4.1.353.2.3.1.1.4 | ||
| The accumulated number of assigned ATM cells which were transmitted across this interface. | |||
| OBJECT-TYPE | |||
| Counter | |||
| atmfVpcGroup | 1.3.6.1.4.1.353.2.4 | ||
| OBJECT IDENTIFIER | |||
| atmfVpcTable | 1.3.6.1.4.1.353.2.4.1 | ||
| A table of status and parameter information on the virtual path connections which cross this UNI. These is one entry in this table for each permanent virtual path connection. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AtmfVpcEntry | |||
| atmfVpcEntry | 1.3.6.1.4.1.353.2.4.1.1 | ||
| An entry in the table, containing information about a particular virtual path connection. | |||
| OBJECT-TYPE | |||
| AtmfVpcEntry | |||
| atmfVpcPortIndex | 1.3.6.1.4.1.353.2.4.1.1.1 | ||
| The unique value which identifies the UNI port. The value of 0 has the special meaning of identifying the local UNI. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2147483647 | ||
| atmfVpcVpi | 1.3.6.1.4.1.353.2.4.1.1.2 | ||
| The VPI value of this Virtual Path Connection at the local UNI. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| atmfVpcOperStatus | 1.3.6.1.4.1.353.2.4.1.1.3 | ||
| The present actual operational status of the VPC. A value of end2endUp(2) or end2endDown(3) would be used if the end-to-end status is known. If only local status information is available, a value of localUpEnd2endUnknown(4) or localDown(5) would be used. | |||
| OBJECT-TYPE | |||
| INTEGER | unknown(1), end2endUp(2), end2endDown(3), localUpEnd2endUnknown(4), localDown(5) | ||
| atmfVpcTransmitTrafficDescriptorType | 1.3.6.1.4.1.353.2.4.1.1.4 | ||
| The type of traffic management, applicable to the transmit direction of this VPC. The type may indicate none, or a type with one or more parameters. These parameters are specified as a parameter vector, in the corresponding instances of the objects: atmfVpcTransmitTrafficDescriptorParam1, atmfVpcTransmitTrafficDescriptorParam2, atmfVpcTransmitTrafficDescriptorParam3, atmfVpcTransmitTrafficDescriptorParam4, and atmfVpcTransmitTrafficDescriptorParam5. | |||
| OBJECT-TYPE | |||
| OBJECT IDENTIFIER | |||
| atmfVpcTransmitTrafficDescriptorParam1 | 1.3.6.1.4.1.353.2.4.1.1.5 | ||
| The first parameter of the transmit parameter vector for this VPC, used according to the value of atmfVpcTransmitTrafficDescriptorType. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2147483647 | ||
| atmfVpcTransmitTrafficDescriptorParam2 | 1.3.6.1.4.1.353.2.4.1.1.6 | ||
| The second parameter of the transmit parameter vector for this VPC, used according to the value of atmfVpcTransmitTrafficDescriptorType. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2147483647 | ||
| atmfVpcTransmitTrafficDescriptorParam3 | 1.3.6.1.4.1.353.2.4.1.1.7 | ||
| The third parameter of the transmit parameter vector for this VPC, used according to the value of atmfVpcTransmitTrafficDescriptorType. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2147483647 | ||
| atmfVpcTransmitTrafficDescriptorParam4 | 1.3.6.1.4.1.353.2.4.1.1.8 | ||
| The fourth parameter of the transmit parameter vector for this VPC, used according to the value of atmfVpcTransmitTrafficDescriptorType. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2147483647 | ||
| atmfVpcTransmitTrafficDescriptorParam5 | 1.3.6.1.4.1.353.2.4.1.1.9 | ||
| The fifth parameter of the transmit parameter vector for this VPC, used according to the value of atmfVpcTransmitTrafficDescriptorType. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2147483647 | ||
| atmfVpcReceiveTrafficDescriptorType | 1.3.6.1.4.1.353.2.4.1.1.10 | ||
| The type of traffic management, applicable to the traffic in the receive direction of this VPC. The type may indicate none, or a type with one or more parameters. These parameters are specified as a parameter vector, in the corresponding instances of the objects: atmfVpcReceiveTrafficDescriptorParam1, atmfVpcReceiveTrafficDescriptorParam2, atmfVpcReceiveTrafficDescriptorParam3, atmfVpcReceiveTrafficDescriptorParam4, and atmfVpcReceiveTrafficDescriptorParam5. | |||
| OBJECT-TYPE | |||
| OBJECT IDENTIFIER | |||
| atmfVpcReceiveTrafficDescriptorParam1 | 1.3.6.1.4.1.353.2.4.1.1.11 | ||
| The first parameter of the receive parameter vector for this VPC, used according to the value of atmfVpcReceiveTrafficDescriptorType. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2147483647 | ||
| atmfVpcReceiveTrafficDescriptorParam2 | 1.3.6.1.4.1.353.2.4.1.1.12 | ||
| The second parameter of the receive parameter vector for this VPC, used according to the value of atmfVpcReceiveTrafficDescriptorType. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2147483647 | ||
| atmfVpcReceiveTrafficDescriptorParam3 | 1.3.6.1.4.1.353.2.4.1.1.13 | ||
| The third parameter of the receive parameter vector for this VPC, used according to the value of atmfVpcReceiveTrafficDescriptorType. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2147483647 | ||
| atmfVpcReceiveTrafficDescriptorParam4 | 1.3.6.1.4.1.353.2.4.1.1.14 | ||
| The fourth parameter of the receive parameter vector for this VPC, used according to the value of atmfVpcReceiveTrafficDescriptorType. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2147483647 | ||
| atmfVpcReceiveTrafficDescriptorParam5 | 1.3.6.1.4.1.353.2.4.1.1.15 | ||
| The fifth parameter of the receive parameter vector for this VPC, used according to the value of atmfVpcReceiveTrafficDescriptorType. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2147483647 | ||
| atmfVpcQoSCategory | 1.3.6.1.4.1.353.2.4.1.1.16 | ||
| This object should not be implemented except as required for backward compatibility with version 2.0 of the UNI specification. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), deterministic(2), statistical(3), unspecified(4) | ||
| atmfVpcTransmitQoSClass | 1.3.6.1.4.1.353.2.4.1.1.17 | ||
| The QoS Class, as defined in section 4 of Appendix A, for the transmit direction of this VPC connection at the local UNI. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| atmfVpcReceiveQoSClass | 1.3.6.1.4.1.353.2.4.1.1.18 | ||
| The QoS Class, as defined in section 4 of Appendix A, for the receive direction of this VPC connection at the local UNI. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| atmfVccGroup | 1.3.6.1.4.1.353.2.5 | ||
| OBJECT IDENTIFIER | |||
| atmfVccTable | 1.3.6.1.4.1.353.2.5.1 | ||
| A table of status and parameter information on the virtual channel connections which are visible at this UNI. There is one entry in this table for each permanent virtual channel connection, including reserved VCC that are supported: e.g., signalling, OAM flows, and ILMI, but not unassigned cells. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AtmfVccEntry | |||
| atmfVccEntry | 1.3.6.1.4.1.353.2.5.1.1 | ||
| An entry in the table, containing information about a particular virtual channel connection. | |||
| OBJECT-TYPE | |||
| AtmfVccEntry | |||
| atmfVccPortIndex | 1.3.6.1.4.1.353.2.5.1.1.1 | ||
| The unique value which identifies the UNI port. The value of 0 has the special meaning of identifying the local UNI. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2147483647 | ||
| atmfVccVpi | 1.3.6.1.4.1.353.2.5.1.1.2 | ||
| The VPI value of this Virtual Channel Connection at the local UNI. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| atmfVccVci | 1.3.6.1.4.1.353.2.5.1.1.3 | ||
| The VCI value of this Virtual Channel Connection at the local UNI. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| atmfVccOperStatus | 1.3.6.1.4.1.353.2.5.1.1.4 | ||
| The present actual operational status of the VCC. A value of end2endUp(2) or end2endUp(3) is used if the end to end status is known. If only local status is known a value of localUpEnd2endUnknown(4) or localDown(5) is used. | |||
| OBJECT-TYPE | |||
| INTEGER | unknown(1), end2endUp(2), end2endDown(3), localUpEnd2endUnknown(4), localDown(5) | ||
| atmfVccTransmitTrafficDescriptorType | 1.3.6.1.4.1.353.2.5.1.1.5 | ||
| The type of traffic management, applicable to the transmit direction of this VCC. The type may indicate none, or a type with one or more parameters. These parameters are specified as a parameter vector, in the corresponding instances of the objects: atmfVccTransmitTrafficDescriptorParam1, atmfVccTransmitTrafficDescriptorParam2, atmfVccTransmitTrafficDescriptorParam3, atmfVccTransmitTrafficDescriptorParam4, and atmfVccTransmitTrafficDescriptorParam5. | |||
| OBJECT-TYPE | |||
| OBJECT IDENTIFIER | |||
| atmfVccTransmitTrafficDescriptorParam1 | 1.3.6.1.4.1.353.2.5.1.1.6 | ||
| The first parameter of the transmit parameter vector for this VCC, used according to the value of atmfVccTransmitTrafficDescriptorType. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2147483647 | ||
| atmfVccTransmitTrafficDescriptorParam2 | 1.3.6.1.4.1.353.2.5.1.1.7 | ||
| The second parameter of the transmit parameter vector for this VCC, used according to the value of atmfVccTransmitTrafficDescriptorType. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2147483647 | ||
| atmfVccTransmitTrafficDescriptorParam3 | 1.3.6.1.4.1.353.2.5.1.1.8 | ||
| The third parameter of the transmit parameter vector for this VCC, used according to the value of atmfVccTransmitTrafficDescriptorType. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2147483647 | ||
| atmfVccTransmitTrafficDescriptorParam4 | 1.3.6.1.4.1.353.2.5.1.1.9 | ||
| The fourth parameter of the transmit parameter vector for this VCC, used according to the value of atmfVccTransmitTrafficDescriptorType. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2147483647 | ||
| atmfVccTransmitTrafficDescriptorParam5 | 1.3.6.1.4.1.353.2.5.1.1.10 | ||
| The fifth parameter of the transmit parameter vector for this VCC, used according to the value of atmfVccTransmitTrafficDescriptorType. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2147483647 | ||
| atmfVccReceiveTrafficDescriptorType | 1.3.6.1.4.1.353.2.5.1.1.11 | ||
| The type of traffic management, applicable to the traffic in the receive direction of this VCC. The type may indicate none, or a type with one or more parameters. These parameters are specified as a parameter vector, in the corresponding instances of the objects: atmfVccReceiveTrafficDescriptorParam1, atmfVccReceiveTrafficDescriptorParam2, atmfVccReceiveTrafficDescriptorParam3, atmfVccReceiveTrafficDescriptorParam4, and atmfVccReceiveTrafficDescriptorParam5. | |||
| OBJECT-TYPE | |||
| OBJECT IDENTIFIER | |||
| atmfVccReceiveTrafficDescriptorParam1 | 1.3.6.1.4.1.353.2.5.1.1.12 | ||
| The first parameter of the receive parameter vector for this VCC, used according to the value of atmfVccReceiveTrafficDescriptorType. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2147483647 | ||
| atmfVccReceiveTrafficDescriptorParam2 | 1.3.6.1.4.1.353.2.5.1.1.13 | ||
| The second parameter of the receive parameter vector for this VCC, used according to the value of atmfVccReceiveTrafficDescriptorType. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2147483647 | ||
| atmfVccReceiveTrafficDescriptorParam3 | 1.3.6.1.4.1.353.2.5.1.1.14 | ||
| The third parameter of the receive parameter vector for this VCC, used according to the value of atmfVccReceiveTrafficDescriptorType. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2147483647 | ||
| atmfVccReceiveTrafficDescriptorParam4 | 1.3.6.1.4.1.353.2.5.1.1.15 | ||
| The fourth parameter of the receive parameter vector for this VCC, used according to the value of atmfVccReceiveTrafficDescriptorType. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2147483647 | ||
| atmfVccReceiveTrafficDescriptorParam5 | 1.3.6.1.4.1.353.2.5.1.1.16 | ||
| The fifth parameter of the receive parameter vector for this VCC, used according to the value of atmfVccReceiveTrafficDescriptorType. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2147483647 | ||
| atmfVccQoSCategory | 1.3.6.1.4.1.353.2.5.1.1.17 | ||
| This object should not be implemented except as required for backward compatibility with version 2.0 of the UNI specification. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), deterministic(2), statistical(3), unspecified(4) | ||
| atmfVccTransmitQoSClass | 1.3.6.1.4.1.353.2.5.1.1.18 | ||
| The QoS Class, as defined in section 4 of Appendix A, for the transmit direction of this VCC connection at the local UNI. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| atmfVccReceiveQoSClass | 1.3.6.1.4.1.353.2.5.1.1.19 | ||
| The QoS Class, as defined in section 4 of Appendix A, for the receive direction of this VCC connection at the local UNI. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| atmfAddressGroup | 1.3.6.1.4.1.353.2.6 | ||
| OBJECT IDENTIFIER | |||
| atmfAddressTable | 1.3.6.1.4.1.353.2.6.1 | ||
| A table implemented by the network-side of an ATM UNI port, containing the ATM-layer addresses in effect on the user-side of the UNI. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AtmfAddressEntry | |||
| atmfAddressEntry | 1.3.6.1.4.1.353.2.6.1.1 | ||
| Information about a single ATM-layer address in effect on the user-side of a UNI port. Note that the index variable atmfAddressAtmAddress is a variable-length string, and as such the rule for variable-length strings in section 4.1.6 of RFC 1212 applies. | |||
| OBJECT-TYPE | |||
| AtmfAddressEntry | |||
| atmfAddressPort | 1.3.6.1.4.1.353.2.6.1.1.1 | ||
| A unique value which identifies the UNI port for which the ATM address is in effect. The value of 0 has the special meaning of identifying the local UNI. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2147483647 | ||
| atmfAddressAtmAddress | 1.3.6.1.4.1.353.2.6.1.1.2 | ||
| The ATM address which is in effect on the user-side of the ATM UNI port. | |||
| OBJECT-TYPE | |||
| AtmAddress2 | |||
| atmfAddressStatus | 1.3.6.1.4.1.353.2.6.1.1.3 | ||
| An indication of the validity of the ATM address at the user-side of the UNI port. To configure a new address in this table, the user-side must set the appropriate instance of this object to the value valid(1). To delete an existing address in this able, the user-side must set the appropriate instance of this object to the value invalid(2). If circumstances occur on the network-side which cause an address to become invalid, the network-side modifies the value of the appropriate instance of this object to invalid(2). Whenever the value of this object for a particular address becomes invalid(2), the conceptual row for that address may be removed from the table at anytime, either immediately or subsequently. | |||
| OBJECT-TYPE | |||
| INTEGER | valid(1), invalid(2) | ||
| atmfNetPrefixGroup | 1.3.6.1.4.1.353.2.7 | ||
| OBJECT IDENTIFIER | |||
| atmfNetPrefixTable | 1.3.6.1.4.1.353.2.7.1 | ||
| A table implemented by the UNI Management Entity on the user-side of an ATM UNI port, containing the network-prefix(es) for ATM-layer addresses in effect on the user-side of the UNI. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AtmfNetPrefixEntry | |||
| atmfNetPrefixEntry | 1.3.6.1.4.1.353.2.7.1.1 | ||
| Information about a single network-prefix for ATM-layer addresses in effect on the user-side of a UNI port. Note that the index variable atmfNetPrefixPrefix is a variable-length string, and as such the rule for variable-length strings in section 4.1.6 of RFC 1212 applies. | |||
| OBJECT-TYPE | |||
| AtmfNetPrefixEntry | |||
| atmfNetPrefixPort | 1.3.6.1.4.1.353.2.7.1.1.1 | ||
| A unique value which identifies the UNI port for which the network prefix for ATM addresses is in effect. The value of 0 has the special meaning of identifying the local UNI. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2147483647 | ||
| atmfNetPrefixPrefix | 1.3.6.1.4.1.353.2.7.1.1.2 | ||
| The network prefix for ATM addresses which is in effect on the user-side of the ATM UNI port. | |||
| OBJECT-TYPE | |||
| NetPrefix | |||
| atmfNetPrefixStatus | 1.3.6.1.4.1.353.2.7.1.1.3 | ||
| An indication of the validity of the network prefix for ATM addresses on the user-side of the UNI port. To configure a new network prefix in this table, the network-side must set the appropriate instance of this object to the value valid(1). To delete an existing network prefix in this table, the network-side must set the appropriate instance of this object to the value invalid(2). If circumstances occur on the user-side which cause a prefix to become invalid, the user-side modifies the value of the appropriate instance of this object to invalid(2). Whenever the value of this object for a particular prefix becomes invalid(2), the conceptual row for that prefix may be removed from the table at anytime, either immediately or subsequently. | |||
| OBJECT-TYPE | |||
| INTEGER | valid(1), invalid(2) | ||
| AtmAddress | |||
| OCTET STRING | SIZE(0..32) | ||
| AtmAddress2 | |||
| OCTET STRING | SIZE(8 | 20) | ||
| NetPrefix | |||
| OCTET STRING | SIZE(8 | 13) | ||
| AtmfPortEntry | |||
| SEQUENCE | |||
| INTEGER as atmfPortIndex | |||
| AtmAddress as atmfPortAddress | |||
| OBJECT IDENTIFIER as atmfPortTransmissionType | |||
| OBJECT IDENTIFIER as atmfPortMediaType | |||
| INTEGER as atmfPortOperStatus | |||
| OBJECT IDENTIFIER as atmfPortSpecific | |||
| DisplayString as atmfPortMyIfName | |||
| AtmfAtmLayerEntry | |||
| SEQUENCE | |||
| INTEGER as atmfAtmLayerIndex | |||
| INTEGER as atmfAtmLayerMaxVPCs | |||
| INTEGER as atmfAtmLayerMaxVCCs | |||
| INTEGER as atmfAtmLayerConfiguredVPCs | |||
| INTEGER as atmfAtmLayerConfiguredVCCs | |||
| INTEGER as atmfAtmLayerMaxVpiBits | |||
| INTEGER as atmfAtmLayerMaxVciBits | |||
| INTEGER as atmfAtmLayerUniType | |||
| INTEGER as atmfAtmLayerUniVersion | |||
| AtmfAtmStatsEntry | |||
| SEQUENCE | |||
| INTEGER as atmfAtmStatsIndex | |||
| Counter as atmfAtmStatsReceivedCells | |||
| Counter as atmfAtmStatsDroppedReceivedCells | |||
| Counter as atmfAtmStatsTransmittedCells | |||
| AtmfVpcEntry | |||
| SEQUENCE | |||
| INTEGER as atmfVpcPortIndex | |||
| INTEGER as atmfVpcVpi | |||
| INTEGER as atmfVpcOperStatus | |||
| OBJECT IDENTIFIER as atmfVpcTransmitTrafficDescriptorType | |||
| INTEGER as atmfVpcTransmitTrafficDescriptorParam1 | |||
| INTEGER as atmfVpcTransmitTrafficDescriptorParam2 | |||
| INTEGER as atmfVpcTransmitTrafficDescriptorParam3 | |||
| INTEGER as atmfVpcTransmitTrafficDescriptorParam4 | |||
| INTEGER as atmfVpcTransmitTrafficDescriptorParam5 | |||
| OBJECT IDENTIFIER as atmfVpcReceiveTrafficDescriptorType | |||
| INTEGER as atmfVpcReceiveTrafficDescriptorParam1 | |||
| INTEGER as atmfVpcReceiveTrafficDescriptorParam2 | |||
| INTEGER as atmfVpcReceiveTrafficDescriptorParam3 | |||
| INTEGER as atmfVpcReceiveTrafficDescriptorParam4 | |||
| INTEGER as atmfVpcReceiveTrafficDescriptorParam5 | |||
| INTEGER as atmfVpcQoSCategory | |||
| INTEGER as atmfVpcTransmitQoSClass | |||
| INTEGER as atmfVpcReceiveQoSClass | |||
| AtmfVccEntry | |||
| SEQUENCE | |||
| INTEGER as atmfVccPortIndex | |||
| INTEGER as atmfVccVpi | |||
| INTEGER as atmfVccVci | |||
| INTEGER as atmfVccOperStatus | |||
| OBJECT IDENTIFIER as atmfVccTransmitTrafficDescriptorType | |||
| INTEGER as atmfVccTransmitTrafficDescriptorParam1 | |||
| INTEGER as atmfVccTransmitTrafficDescriptorParam2 | |||
| INTEGER as atmfVccTransmitTrafficDescriptorParam3 | |||
| INTEGER as atmfVccTransmitTrafficDescriptorParam4 | |||
| INTEGER as atmfVccTransmitTrafficDescriptorParam5 | |||
| OBJECT IDENTIFIER as atmfVccReceiveTrafficDescriptorType | |||
| INTEGER as atmfVccReceiveTrafficDescriptorParam1 | |||
| INTEGER as atmfVccReceiveTrafficDescriptorParam2 | |||
| INTEGER as atmfVccReceiveTrafficDescriptorParam3 | |||
| INTEGER as atmfVccReceiveTrafficDescriptorParam4 | |||
| INTEGER as atmfVccReceiveTrafficDescriptorParam5 | |||
| INTEGER as atmfVccQoSCategory | |||
| INTEGER as atmfVccTransmitQoSClass | |||
| INTEGER as atmfVccReceiveQoSClass | |||
| AtmfNetPrefixEntry | |||
| SEQUENCE | |||
| INTEGER as atmfNetPrefixPort | |||
| NetPrefix as atmfNetPrefixPrefix | |||
| INTEGER as atmfNetPrefixStatus | |||
| AtmfAddressEntry | |||
| SEQUENCE | |||
| INTEGER as atmfAddressPort | |||
| AtmAddress2 as atmfAddressAtmAddress | |||
| INTEGER as atmfAddressStatus | |||