
| RFC1155-SMI | RFC1213-MIB | RFC-1215 |
| enterprises | OBJECT-TYPE | IpAddress |
| Counter | Gauge | TimeTicks |
| mgmt | DisplayString | PhysAddress |
| TRAP-TYPE |
| mib-2 | 1.3.6.1.2.1 | ||
| OBJECT IDENTIFIER | |||
| snmp | 1.3.6.1.2.1.11 | ||
| OBJECT IDENTIFIER | |||
| coldStart | 1.3.6.1.2.1.11.0 | ||
| A coldStart trap signifies that the sending protocol entity is reinitializing itself such that the agent's configuration or the protocol entity implementation may be altered. | |||
| TRAP-TYPE | |||
| authenticationFailure | 1.3.6.1.2.1.11.4 | ||
| An authenticationFailure trap signifies that the sending protocol entity is the addressee of a protocol message that is not properly authenticated. While implementations of the SNMP must be capable of generating this trap, they must also be capable of suppressing the emission of such traps via an implementation- specific mechanism. | |||
| TRAP-TYPE | |||
| axis | 1.3.6.1.4.1.368 | ||
| OBJECT IDENTIFIER | |||
| products | 1.3.6.1.4.1.368.1 | ||
| OBJECT IDENTIFIER | |||
| trapPrinter | 1.3.6.1.4.1.368.1 | ||
| A printer error has occurred. | |||
| TRAP-TYPE | |||
| portIndex | |||
| portDescr | |||
| portOnLine | |||
| portBusy | |||
| portEndOfForms | |||
| portFault | |||
| nps | 1.3.6.1.4.1.368.1.1 | ||
| OBJECT IDENTIFIER | |||
| print-server | 1.3.6.1.4.1.368.2 | ||
| OBJECT IDENTIFIER | |||
| trapNewIPaddr | 1.3.6.1.4.1.368.2 | ||
| The IP address has been changed by RARP or an 'arp -s'. | |||
| TRAP-TYPE | |||
| adminOldIntAddr | |||
| status | 1.3.6.1.4.1.368.2.1 | ||
| OBJECT IDENTIFIER | |||
| ports | 1.3.6.1.4.1.368.2.1.1 | ||
| OBJECT IDENTIFIER | |||
| portNumber | 1.3.6.1.4.1.368.2.1.1.1 | ||
| The number of ports. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| portTable | 1.3.6.1.4.1.368.2.1.1.2 | ||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| PortEntry | |||
| portEntry | 1.3.6.1.4.1.368.2.1.1.2.1 | ||
| OBJECT-TYPE | |||
| PortEntry | |||
| portIndex | 1.3.6.1.4.1.368.2.1.1.2.1.1 | ||
| The port's number. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| portDescr | 1.3.6.1.4.1.368.2.1.1.2.1.2 | ||
| The port descriptor, name and type. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| portOnLine | 1.3.6.1.4.1.368.2.1.1.2.1.3 | ||
| The port's On-Line status. | |||
| OBJECT-TYPE | |||
| INTEGER | on-line(1), off-line(2), no-value(3) | ||
| portBusy | 1.3.6.1.4.1.368.2.1.1.2.1.4 | ||
| The port's Busy status. | |||
| OBJECT-TYPE | |||
| INTEGER | ready(1), busy(2) | ||
| portEndOfForms | 1.3.6.1.4.1.368.2.1.1.2.1.5 | ||
| The port's End-of-Forms status. | |||
| OBJECT-TYPE | |||
| INTEGER | no-error(1), end-of-forms(2), no-value(3) | ||
| portFault | 1.3.6.1.4.1.368.2.1.1.2.1.6 | ||
| The port's Fault status. | |||
| OBJECT-TYPE | |||
| INTEGER | no-error(1), fault(2), no-value(3) | ||
| portOutputBytes | 1.3.6.1.4.1.368.2.1.1.2.1.7 | ||
| The number of bytes sent out on the port during a printout in progress or the last printout. | |||
| OBJECT-TYPE | |||
| Counter | |||
| portInputBytes | 1.3.6.1.4.1.368.2.1.1.2.1.8 | ||
| The number of bytes received on the port during a printout in progress or the last printout. | |||
| OBJECT-TYPE | |||
| Counter | |||
| portPrintouts | 1.3.6.1.4.1.368.2.1.1.2.1.9 | ||
| The number of printouts started on the port. | |||
| OBJECT-TYPE | |||
| Counter | |||
| portAvailable | 1.3.6.1.4.1.368.2.1.1.2.1.10 | ||
| If the port is assigned for a printout. | |||
| OBJECT-TYPE | |||
| INTEGER | available(1), printing(2) | ||
| portIsInput | 1.3.6.1.4.1.368.2.1.1.2.1.11 | ||
| If the port is assigned as an input port (bidirectional). | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| admin | 1.3.6.1.4.1.368.2.2 | ||
| OBJECT IDENTIFIER | |||
| adminUnitStatus | 1.3.6.1.4.1.368.2.2.1 | ||
| The units's operational status. A other than (1) will reset the unit. | |||
| OBJECT-TYPE | |||
| INTEGER | running(1), softReset(2), hardReset(3) | ||
| adminConfigStatus | 1.3.6.1.4.1.368.2.2.2 | ||
| The units's configuration status. read-only values: (1) reserved for future use. (2) reserved for future use. write-only values : (3) will load permanent values . (4) will save current configuration permanently. (5) load default configuration. | |||
| OBJECT-TYPE | |||
| INTEGER | configUnknown(1), configUnknown(2), configLoadRequest(3), configSaveRequest(4), configDefaultRequest(5) | ||
| adminOldIntAddr | 1.3.6.1.4.1.368.2.2.3 | ||
| The Internet Address at power-on or before change by RARP or 'arp -s'. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| setup | 1.3.6.1.4.1.368.2.3 | ||
| OBJECT IDENTIFIER | |||
| config | 1.3.6.1.4.1.368.2.3.1 | ||
| OBJECT IDENTIFIER | |||
| ethAddr | 1.3.6.1.4.1.368.2.3.1.2 | ||
| The Ethernet Address. | |||
| OBJECT-TYPE | |||
| PhysAddress | |||
| rootPwd | 1.3.6.1.4.1.368.2.3.1.7 | ||
| The Root Password. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| users | 1.3.6.1.4.1.368.2.3.1.8 | ||
| The User Defintions. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| hpJetadmin | 1.3.6.1.4.1.368.2.3.1.13 | ||
| HP JetAdmin Support. | |||
| OBJECT-TYPE | |||
| INTEGER | yes(1), no(2) | ||
| axisPrintSystem | 1.3.6.1.4.1.368.2.3.1.15 | ||
| The AXIS Print System enable switch. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| baseUrl | 1.3.6.1.4.1.368.2.3.1.17 | ||
| The base URL. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| defOut | 1.3.6.1.4.1.368.2.3.1.60 | ||
| Internal Printout Destination. | |||
| OBJECT-TYPE | |||
| INTEGER | pr1(1), pr2(2), pr3(3), pr4(4), pr5(5), pr6(6), pr7(7), pr8(8), lpt1(9), com1(10), lpt2(11) | ||
| tcpip | 1.3.6.1.4.1.368.2.3.2 | ||
| OBJECT IDENTIFIER | |||
| intAddr | 1.3.6.1.4.1.368.2.3.2.1 | ||
| The Internet Address. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| defRout | 1.3.6.1.4.1.368.2.3.2.3 | ||
| The Default Router. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| netMask | 1.3.6.1.4.1.368.2.3.2.4 | ||
| The Net Mask. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| tcpEnb | 1.3.6.1.4.1.368.2.3.2.5 | ||
| The TCP protocol stack enable switch. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| tcpKey | 1.3.6.1.4.1.368.2.3.2.6 | ||
| The TCP protocol stack enable software key. | |||
| OBJECT-TYPE | |||
| OCTET STRING | |||
| prosPwd | 1.3.6.1.4.1.368.2.3.2.9 | ||
| The PROS password. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| prosPrt | 1.3.6.1.4.1.368.2.3.2.11 | ||
| The PROS TCP Port. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| lpdBanner | 1.3.6.1.4.1.368.2.3.2.12 | ||
| The LPD banner page switch. | |||
| OBJECT-TYPE | |||
| INTEGER | off(0), auto(1), last(2) | ||
| rtnOpt | 1.3.6.1.4.1.368.2.3.2.18 | ||
| The Reverse Telnet option handling switch. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| rTelPr1 | 1.3.6.1.4.1.368.2.3.2.601 | ||
| The TCP port for reverse Telnet to logical printer 1. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| rTelPr2 | 1.3.6.1.4.1.368.2.3.2.602 | ||
| The TCP port for reverse Telnet to logical printer 2. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| rTelPr3 | 1.3.6.1.4.1.368.2.3.2.603 | ||
| The TCP port for reverse Telnet to logical printer 3. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| rTelPr4 | 1.3.6.1.4.1.368.2.3.2.604 | ||
| The TCP port for reverse Telnet to logical printer 4. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| rTelPr5 | 1.3.6.1.4.1.368.2.3.2.605 | ||
| The TCP port for reverse Telnet to logical printer 5. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| rTelPr6 | 1.3.6.1.4.1.368.2.3.2.606 | ||
| The TCP port for reverse Telnet to logical printer 6. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| rTelPr7 | 1.3.6.1.4.1.368.2.3.2.607 | ||
| The TCP port for reverse Telnet to logical printer 7. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| rTelPr8 | 1.3.6.1.4.1.368.2.3.2.608 | ||
| The TCP port for reverse Telnet to logical printer 8. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dnsEnb | 1.3.6.1.4.1.368.2.3.2.670 | ||
| The DNS on/off switch. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| dnsPrimaryAddr | 1.3.6.1.4.1.368.2.3.2.671 | ||
| The Primary DNS Server Address. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| dnsSecondaryAddr | 1.3.6.1.4.1.368.2.3.2.672 | ||
| The Secondary DNS Server Address. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| ipDomain | 1.3.6.1.4.1.368.2.3.2.673 | ||
| The Domain Name. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| slpScopeList | 1.3.6.1.4.1.368.2.3.2.680 | ||
| The SLP Scope List. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| winsEnb | 1.3.6.1.4.1.368.2.3.2.692 | ||
| The WINS on/off switch. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| winsPrimaryAddr | 1.3.6.1.4.1.368.2.3.2.693 | ||
| The Primary WINS Server Address. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| winsSecondaryAddr | 1.3.6.1.4.1.368.2.3.2.694 | ||
| The Secondary WINS Server Address. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| nbtScopeId | 1.3.6.1.4.1.368.2.3.2.695 | ||
| The NBT Scope ID. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| dhcpEnb | 1.3.6.1.4.1.368.2.3.2.696 | ||
| The dhcp on/off switch. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| bootpEnb | 1.3.6.1.4.1.368.2.3.2.698 | ||
| The bootp on/off switch. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| rarpEnb | 1.3.6.1.4.1.368.2.3.2.699 | ||
| The rarp on/off switch. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| snmpcontrol | 1.3.6.1.4.1.368.2.3.3 | ||
| OBJECT IDENTIFIER | |||
| readCommunity | 1.3.6.1.4.1.368.2.3.3.701 | ||
| The community having read-only access to all objects except WriteCommunity. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| writeCommunity | 1.3.6.1.4.1.368.2.3.3.702 | ||
| The community having full access to all objects. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| trapAddress | 1.3.6.1.4.1.368.2.3.3.705 | ||
| The IP address to send traps to. No traps if set to 0.0.0.0 . | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| trapCommunity | 1.3.6.1.4.1.368.2.3.3.706 | ||
| The community used when sending traps. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| enableAuthenTraps | 1.3.6.1.4.1.368.2.3.3.715 | ||
| Same as snmpEnableAuthenTraps in MIB-II. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| enablePrinterTraps | 1.3.6.1.4.1.368.2.3.3.716 | ||
| Enables the enterprise specific 'trapPrinter' traps. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| netware | 1.3.6.1.4.1.368.2.3.4 | ||
| OBJECT IDENTIFIER | |||
| netwEnb | 1.3.6.1.4.1.368.2.3.4.400 | ||
| The NetWare protocol stack enable switch. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| psName | 1.3.6.1.4.1.368.2.3.4.401 | ||
| The NetWare print server name. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| confServ | 1.3.6.1.4.1.368.2.3.4.402 | ||
| The NetWare configuration file server name. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| psPoll | 1.3.6.1.4.1.368.2.3.4.405 | ||
| The NetWare print server poll time. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| autoScan | 1.3.6.1.4.1.368.2.3.4.406 | ||
| Determines scanning mode of print server. | |||
| OBJECT-TYPE | |||
| INTEGER | off(1), pserver(2), rprinter(3), both(4) | ||
| fr-802-3 | 1.3.6.1.4.1.368.2.3.4.420 | ||
| The 802.3 frame support switch for NetWare. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| fr-eth-2 | 1.3.6.1.4.1.368.2.3.4.421 | ||
| The Ethernet-2 frame support switch for NetWare. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| fr-802-2 | 1.3.6.1.4.1.368.2.3.4.422 | ||
| The 802.2 frame support switch for NetWare. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| fr-snap | 1.3.6.1.4.1.368.2.3.4.423 | ||
| The SNAP frame support switch for NetWare. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| login1 | 1.3.6.1.4.1.368.2.3.4.432 | ||
| File server, print queue and logical printer def. . | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| login2 | 1.3.6.1.4.1.368.2.3.4.433 | ||
| File server, print queue and logical printer def. . | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| login3 | 1.3.6.1.4.1.368.2.3.4.434 | ||
| File server, print queue and logical printer def. . | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| login4 | 1.3.6.1.4.1.368.2.3.4.435 | ||
| File server, print queue and logical printer def. . | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| login5 | 1.3.6.1.4.1.368.2.3.4.436 | ||
| File server, print queue and logical printer def. . | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| login6 | 1.3.6.1.4.1.368.2.3.4.437 | ||
| File server, print queue and logical printer def. . | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| login7 | 1.3.6.1.4.1.368.2.3.4.438 | ||
| File server, print queue and logical printer def. . | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| login8 | 1.3.6.1.4.1.368.2.3.4.439 | ||
| File server, print queue and logical printer def. . | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| login9 | 1.3.6.1.4.1.368.2.3.4.440 | ||
| File server, print queue and logical printer def. . | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| login10 | 1.3.6.1.4.1.368.2.3.4.441 | ||
| File server, print queue and logical printer def. . | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| login11 | 1.3.6.1.4.1.368.2.3.4.442 | ||
| File server, print queue and logical printer def. . | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| login12 | 1.3.6.1.4.1.368.2.3.4.443 | ||
| File server, print queue and logical printer def. . | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| login13 | 1.3.6.1.4.1.368.2.3.4.444 | ||
| File server, print queue and logical printer def. . | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| login14 | 1.3.6.1.4.1.368.2.3.4.445 | ||
| File server, print queue and logical printer def. . | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| login15 | 1.3.6.1.4.1.368.2.3.4.446 | ||
| File server, print queue and logical printer def. . | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| login16 | 1.3.6.1.4.1.368.2.3.4.447 | ||
| File server, print queue and logical printer def. . | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| rprinter1 | 1.3.6.1.4.1.368.2.3.4.470 | ||
| Pserver name and printer number on pserver. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| rprinter2 | 1.3.6.1.4.1.368.2.3.4.471 | ||
| Pserver name and printer number on pserver. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| rprinter3 | 1.3.6.1.4.1.368.2.3.4.472 | ||
| Pserver name and printer number on pserver. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| rprinter4 | 1.3.6.1.4.1.368.2.3.4.473 | ||
| Pserver name and printer number on pserver. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| rprinter5 | 1.3.6.1.4.1.368.2.3.4.474 | ||
| Pserver name and printer number on pserver. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| rprinter6 | 1.3.6.1.4.1.368.2.3.4.475 | ||
| Pserver name and printer number on pserver. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| rprinter7 | 1.3.6.1.4.1.368.2.3.4.476 | ||
| Pserver name and printer number on pserver. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| rprinter8 | 1.3.6.1.4.1.368.2.3.4.477 | ||
| Pserver name and printer number on pserver. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| lservlmgr | 1.3.6.1.4.1.368.2.3.5 | ||
| OBJECT IDENTIFIER | |||
| lslmEnb | 1.3.6.1.4.1.368.2.3.5.800 | ||
| The Lan Serv/Lan Mgr protocol stack enable switch. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| lslmFrameType | 1.3.6.1.4.1.368.2.3.5.801 | ||
| Determines which frame type to use. | |||
| OBJECT-TYPE | |||
| INTEGER | auto(1), fr-802-2(2), dix(3) | ||
| lPrint1 | 1.3.6.1.4.1.368.2.3.5.810 | ||
| The Lan Serv/Lan Mgr printer 1 name. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| lLogic1 | 1.3.6.1.4.1.368.2.3.5.811 | ||
| The Lan Serv/Lan Mgr printer 1's logical printer. | |||
| OBJECT-TYPE | |||
| INTEGER | pr1(1), pr2(2), pr3(3), pr4(4), pr5(5), pr6(6), pr7(7), pr8(8), lpt1(9), com1(10), lpt2(11) | ||
| lPrint2 | 1.3.6.1.4.1.368.2.3.5.820 | ||
| The Lan Serv/Lan Mgr printer 1 name. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| lLogic2 | 1.3.6.1.4.1.368.2.3.5.821 | ||
| The Lan Serv/Lan Mgr printer 1's logical printer. | |||
| OBJECT-TYPE | |||
| INTEGER | pr1(1), pr2(2), pr3(3), pr4(4), pr5(5), pr6(6), pr7(7), pr8(8), lpt1(9), com1(10), lpt2(11) | ||
| lPrint3 | 1.3.6.1.4.1.368.2.3.5.830 | ||
| The Lan Serv/Lan Mgr printer 3 name. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| lLogic3 | 1.3.6.1.4.1.368.2.3.5.831 | ||
| The Lan Serv/Lan Mgr printer 3's logical printer. | |||
| OBJECT-TYPE | |||
| INTEGER | pr1(1), pr2(2), pr3(3), pr4(4), pr5(5), pr6(6), pr7(7), pr8(8), lpt1(9), com1(10), lpt2(11) | ||
| lPrint4 | 1.3.6.1.4.1.368.2.3.5.840 | ||
| The Lan Serv/Lan Mgr printer 4 name. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| lLogic4 | 1.3.6.1.4.1.368.2.3.5.841 | ||
| The Lan Serv/Lan Mgr printer 4's logical printer. | |||
| OBJECT-TYPE | |||
| INTEGER | pr1(1), pr2(2), pr3(3), pr4(4), pr5(5), pr6(6), pr7(7), pr8(8), lpt1(9), com1(10), lpt2(11) | ||
| lPrint5 | 1.3.6.1.4.1.368.2.3.5.850 | ||
| The Lan Serv/Lan Mgr printer 5 name. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| lLogic5 | 1.3.6.1.4.1.368.2.3.5.851 | ||
| The Lan Serv/Lan Mgr printer 5's logical printer. | |||
| OBJECT-TYPE | |||
| INTEGER | pr1(1), pr2(2), pr3(3), pr4(4), pr5(5), pr6(6), pr7(7), pr8(8), lpt1(9), com1(10), lpt2(11) | ||
| lPrint6 | 1.3.6.1.4.1.368.2.3.5.860 | ||
| The Lan Serv/Lan Mgr printer 6 name. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| lLogic6 | 1.3.6.1.4.1.368.2.3.5.861 | ||
| The Lan Serv/Lan Mgr printer 6's logical printer. | |||
| OBJECT-TYPE | |||
| INTEGER | pr1(1), pr2(2), pr3(3), pr4(4), pr5(5), pr6(6), pr7(7), pr8(8), lpt1(9), com1(10), lpt2(11) | ||
| lPrint7 | 1.3.6.1.4.1.368.2.3.5.870 | ||
| The Lan Serv/Lan Mgr printer 7 name. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| lLogic7 | 1.3.6.1.4.1.368.2.3.5.871 | ||
| The Lan Serv/Lan Mgr printer 7's logical printer. | |||
| OBJECT-TYPE | |||
| INTEGER | pr1(1), pr2(2), pr3(3), pr4(4), pr5(5), pr6(6), pr7(7), pr8(8), lpt1(9), com1(10), lpt2(11) | ||
| lPrint8 | 1.3.6.1.4.1.368.2.3.5.880 | ||
| The Lan Serv/Lan Mgr printer 8 name. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| lLogic8 | 1.3.6.1.4.1.368.2.3.5.881 | ||
| The Lan Serv/Lan Mgr printer 8's logical printer. | |||
| OBJECT-TYPE | |||
| INTEGER | pr1(1), pr2(2), pr3(3), pr4(4), pr5(5), pr6(6), pr7(7), pr8(8), lpt1(9), com1(10), lpt2(11) | ||
| apple | 1.3.6.1.4.1.368.2.3.6 | ||
| OBJECT IDENTIFIER | |||
| atlkEnb | 1.3.6.1.4.1.368.2.3.6.500 | ||
| The AppleTalk protocol stack enable switch. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| atlkKey | 1.3.6.1.4.1.368.2.3.6.501 | ||
| The AppleTalk protocol stack software key. | |||
| OBJECT-TYPE | |||
| OCTET STRING | |||
| atlkZone | 1.3.6.1.4.1.368.2.3.6.502 | ||
| The AppleTalk zone name. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| atlkHPZoner | 1.3.6.1.4.1.368.2.3.6.503 | ||
| Enable/Disable support for HP Zoner. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| atlkFont | 1.3.6.1.4.1.368.2.3.6.504 | ||
| How to respond to a FontListQuery. | |||
| OBJECT-TYPE | |||
| INTEGER | default(1), f35n(2), all(3) | ||
| atlkBinary | 1.3.6.1.4.1.368.2.3.6.505 | ||
| Support binary files or not. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| atlkBinaryType | 1.3.6.1.4.1.368.2.3.6.506 | ||
| Specifies which Binary Communications Protocol to use. | |||
| OBJECT-TYPE | |||
| INTEGER | tbcp(1), bcp(2) | ||
| aPrint1 | 1.3.6.1.4.1.368.2.3.6.510 | ||
| The AppleTalk printer 1 name. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| aType1 | 1.3.6.1.4.1.368.2.3.6.511 | ||
| The AppleTalk printer 1 type. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| aLogic1 | 1.3.6.1.4.1.368.2.3.6.512 | ||
| The AppleTalk printer 1's logical printer. | |||
| OBJECT-TYPE | |||
| INTEGER | pr1(1), pr2(2), pr3(3), pr4(4), pr5(5), pr6(6), pr7(7), pr8(8), lpt1(9), com1(10), lpt2(11) | ||
| aBinaryType1 | 1.3.6.1.4.1.368.2.3.6.513 | ||
| Specifies which Binary Communications Protocol to use for AppleTalk printer 1. | |||
| OBJECT-TYPE | |||
| INTEGER | tbcp(1), bcp(2), none(3) | ||
| aPrint2 | 1.3.6.1.4.1.368.2.3.6.520 | ||
| The AppleTalk printer 2 name. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| aType2 | 1.3.6.1.4.1.368.2.3.6.521 | ||
| The AppleTalk printer 2 type. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| aLogic2 | 1.3.6.1.4.1.368.2.3.6.522 | ||
| The AppleTalk printer 2's logical printer. | |||
| OBJECT-TYPE | |||
| INTEGER | pr1(1), pr2(2), pr3(3), pr4(4), pr5(5), pr6(6), pr7(7), pr8(8), lpt1(9), com1(10), lpt2(11) | ||
| aBinaryType2 | 1.3.6.1.4.1.368.2.3.6.523 | ||
| Specifies which Binary Communications Protocol to use for AppleTalk printer 2. | |||
| OBJECT-TYPE | |||
| INTEGER | tbcp(1), bcp(2), none(3) | ||
| aPrint3 | 1.3.6.1.4.1.368.2.3.6.530 | ||
| The AppleTalk printer 3 name. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| aType3 | 1.3.6.1.4.1.368.2.3.6.531 | ||
| The AppleTalk printer 3 type. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| aLogic3 | 1.3.6.1.4.1.368.2.3.6.532 | ||
| The AppleTalk printer 3's logical printer. | |||
| OBJECT-TYPE | |||
| INTEGER | pr1(1), pr2(2), pr3(3), pr4(4), pr5(5), pr6(6), pr7(7), pr8(8), lpt1(9), com1(10), lpt2(11) | ||
| aBinaryType3 | 1.3.6.1.4.1.368.2.3.6.533 | ||
| Specifies which Binary Communications Protocol to use for AppleTalk printer 3. | |||
| OBJECT-TYPE | |||
| INTEGER | tbcp(1), bcp(2), none(3) | ||
| logicals | 1.3.6.1.4.1.368.2.3.7 | ||
| OBJECT IDENTIFIER | |||
| logPrNumber | 1.3.6.1.4.1.368.2.3.7.1 | ||
| The number of logical printers. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| logPrTable | 1.3.6.1.4.1.368.2.3.7.2 | ||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| LogPrEntry | |||
| logPrEntry | 1.3.6.1.4.1.368.2.3.7.2.1 | ||
| OBJECT-TYPE | |||
| LogPrEntry | |||
| logPrIndex | 1.3.6.1.4.1.368.2.3.7.2.1.1 | ||
| The logical printer's number. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| logPrOut | 1.3.6.1.4.1.368.2.3.7.2.1.2 | ||
| The logical printer's output port. | |||
| OBJECT-TYPE | |||
| INTEGER | lpt1(1), com1(2), lpt2(3) | ||
| logPrScnd | 1.3.6.1.4.1.368.2.3.7.2.1.3 | ||
| The logical printer's secondary output port. | |||
| OBJECT-TYPE | |||
| INTEGER | pr1(1), pr2(2), pr3(3), pr4(4), pr5(5), pr6(6), pr7(7), pr8(8), lpt1(9), com1(10), lpt2(11) | ||
| logPrWait | 1.3.6.1.4.1.368.2.3.7.2.1.4 | ||
| The logical printer's wait for printer available switch. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| logPrIn | 1.3.6.1.4.1.368.2.3.7.2.1.5 | ||
| The logical printer's input port. If set to auto, the Print Server will try to use the port specified as output port for both output and input. | |||
| OBJECT-TYPE | |||
| INTEGER | com1(2), none(4), auto(5) | ||
| logPrBef | 1.3.6.1.4.1.368.2.3.7.2.1.7 | ||
| The logical printer's string-before-job. | |||
| OBJECT-TYPE | |||
| OCTET STRING | |||
| logPrStr | 1.3.6.1.4.1.368.2.3.7.2.1.8 | ||
| The logical printer's string-to-string substitution defs. | |||
| OBJECT-TYPE | |||
| OCTET STRING | |||
| logPrCset | 1.3.6.1.4.1.368.2.3.7.2.1.10 | ||
| The logical printer's character set conversion table. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), iso-to-ibm(2), uk-to-ibm7(3), sw-to-ibm7(4), ge-to-ibm7(5), fr-to-ibm7(6), nd-to-ibm7(7), dec-to-ibm(8) | ||
| logPrFilt | 1.3.6.1.4.1.368.2.3.7.2.1.11 | ||
| The logical printer's data stream filter. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), postscr(2), autops(3) | ||
| logPrAft | 1.3.6.1.4.1.368.2.3.7.2.1.12 | ||
| The logical printer's string-after-job. | |||
| OBJECT-TYPE | |||
| OCTET STRING | |||
| logPrDump | 1.3.6.1.4.1.368.2.3.7.2.1.14 | ||
| The logical printer's hexdump filter. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| logPrSize | 1.3.6.1.4.1.368.2.3.7.2.1.17 | ||
| The logical printer's ASCII-to-PostScript conversion page size. | |||
| OBJECT-TYPE | |||
| INTEGER | a4(1), letter(2), legal(3), execut(4) | ||
| logPrOrnt | 1.3.6.1.4.1.368.2.3.7.2.1.18 | ||
| The logical printer's ASCII-to-PostScript conversion page orientation. | |||
| OBJECT-TYPE | |||
| INTEGER | portr(1), lands(2), rportr(3), rlands(4) | ||
| logPrForm | 1.3.6.1.4.1.368.2.3.7.2.1.19 | ||
| The logical printer's ASCII-to-PostScript conversion page format. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| logPrFont | 1.3.6.1.4.1.368.2.3.7.2.1.20 | ||
| The logical printer's PostScript font. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| output | 1.3.6.1.4.1.368.2.3.8 | ||
| OBJECT IDENTIFIER | |||
| centrLPT1 | 1.3.6.1.4.1.368.2.3.8.20 | ||
| The LPT1 port speed. | |||
| OBJECT-TYPE | |||
| INTEGER | ibmpc(1), stndrd(2), fast(3), hispeed(4) | ||
| bsyTimLPT1 | 1.3.6.1.4.1.368.2.3.8.21 | ||
| The LPT1 busy time-out. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| mgmInfoLPT1 | 1.3.6.1.4.1.368.2.3.8.22 | ||
| Get management information on LPT1. | |||
| OBJECT-TYPE | |||
| INTEGER | auto(1), disable(2) | ||
| comLPT1 | 1.3.6.1.4.1.368.2.3.8.23 | ||
| Printer comment for printer on LPT1. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| bidirLPT1 | 1.3.6.1.4.1.368.2.3.8.24 | ||
| LPT1 bidirectional control. | |||
| OBJECT-TYPE | |||
| INTEGER | disable(1), auto(2) | ||
| readTimCOM1 | 1.3.6.1.4.1.368.2.3.8.27 | ||
| The COM1 input time-out. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| handshCOM1 | 1.3.6.1.4.1.368.2.3.8.29 | ||
| The COM1 handshake mode. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), xonxoff(2), robust(3), rdybsy(4), both(5), robustBoth(6) | ||
| baudrCOM1 | 1.3.6.1.4.1.368.2.3.8.30 | ||
| The COM1 baudrate. The settings b57600 and b115200 are not valid for all products, please refer to the corresponding User Manual. | |||
| OBJECT-TYPE | |||
| INTEGER | b300(1), b600(2), b1200(3), b2400(4), b4800(5), b9600(6), b19200(7), b38400(8), b57600(9), b115200(10) | ||
| stopBitsCOM1 | 1.3.6.1.4.1.368.2.3.8.31 | ||
| The COM1 no of stopbits. | |||
| OBJECT-TYPE | |||
| INTEGER | one(1), two(2) | ||
| parityCOM1 | 1.3.6.1.4.1.368.2.3.8.32 | ||
| The COM1 no of parity bits. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), odd(2), even(3) | ||
| noBitsCOM1 | 1.3.6.1.4.1.368.2.3.8.33 | ||
| The COM1 no of bits. | |||
| OBJECT-TYPE | |||
| INTEGER | seven(1), eight(2) | ||
| bsyTimCOM1 | 1.3.6.1.4.1.368.2.3.8.34 | ||
| The COM1 busy time-out. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| mgmInfoCOM1 | 1.3.6.1.4.1.368.2.3.8.35 | ||
| Get management information on COM1. | |||
| OBJECT-TYPE | |||
| INTEGER | auto(1), disable(2) | ||
| comCOM1 | 1.3.6.1.4.1.368.2.3.8.36 | ||
| Printer comment for printer on COM1. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| centrLPT2 | 1.3.6.1.4.1.368.2.3.8.40 | ||
| The LPT2 port speed. | |||
| OBJECT-TYPE | |||
| INTEGER | ibmpc(1), stndrd(2), fast(3), hispeed(4) | ||
| bsyTimLPT2 | 1.3.6.1.4.1.368.2.3.8.41 | ||
| The LPT2 busy time-out. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| mgmInfoLPT2 | 1.3.6.1.4.1.368.2.3.8.42 | ||
| Get management information on LPT2. | |||
| OBJECT-TYPE | |||
| INTEGER | auto(1), disable(2) | ||
| comLPT2 | 1.3.6.1.4.1.368.2.3.8.43 | ||
| Printer comment for printer on LPT2. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| bidirLPT2 | 1.3.6.1.4.1.368.2.3.8.44 | ||
| LPT2 bidirectional control. | |||
| OBJECT-TYPE | |||
| INTEGER | disable(1), auto(2) | ||
| panel | 1.3.6.1.4.1.368.2.3.9 | ||
| OBJECT IDENTIFIER | |||
| defOut | 1.3.6.1.4.1.368.2.3.9.60 | ||
| The default logical printer. | |||
| OBJECT-TYPE | |||
| INTEGER | pr1(1), pr2(2), pr3(3), pr4(4), pr5(5), pr6(6), pr7(7), pr8(8), lpt1(9), com1(10), lpt2(11) | ||
| nds-netware | 1.3.6.1.4.1.368.2.3.10 | ||
| OBJECT IDENTIFIER | |||
| nds-netwEnb | 1.3.6.1.4.1.368.2.3.10.900 | ||
| The NetWare protocol stack enable switch. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| nds-psName | 1.3.6.1.4.1.368.2.3.10.901 | ||
| The print server name. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| nds-netwProt | 1.3.6.1.4.1.368.2.3.10.902 | ||
| The NetWare protocol switch. | |||
| OBJECT-TYPE | |||
| INTEGER | ipx(1), ip(2), dual(3) | ||
| nds-fr-802-3 | 1.3.6.1.4.1.368.2.3.10.910 | ||
| The 802.3 frame support switch for NetWare. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| nds-fr-eth-2 | 1.3.6.1.4.1.368.2.3.10.911 | ||
| The Ethernet-2 frame support switch for NetWare. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| nds-fr-802-2 | 1.3.6.1.4.1.368.2.3.10.912 | ||
| The 802.2 frame support switch for NetWare. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| nds-fr-snap | 1.3.6.1.4.1.368.2.3.10.913 | ||
| The SNAP frame support switch for NetWare. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| jobCheckDelay | 1.3.6.1.4.1.368.2.3.10.920 | ||
| Print queue polling interval. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| confCheckDelay | 1.3.6.1.4.1.368.2.3.10.921 | ||
| Configuration scanning interval. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| pserverNDS | 1.3.6.1.4.1.368.2.3.10.926 | ||
| Initial file server and NDS print server name. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| pserverBindery1 | 1.3.6.1.4.1.368.2.3.10.930 | ||
| Bindery file server. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| pserverBindery2 | 1.3.6.1.4.1.368.2.3.10.931 | ||
| Bindery file server. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| pserverBindery3 | 1.3.6.1.4.1.368.2.3.10.932 | ||
| Bindery file server. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| pserverBindery4 | 1.3.6.1.4.1.368.2.3.10.933 | ||
| Bindery file server. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| pserverBindery5 | 1.3.6.1.4.1.368.2.3.10.934 | ||
| Bindery file server. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| pserverBindery6 | 1.3.6.1.4.1.368.2.3.10.935 | ||
| Bindery file server. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| pserverBindery7 | 1.3.6.1.4.1.368.2.3.10.936 | ||
| Bindery file server. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| pserverBindery8 | 1.3.6.1.4.1.368.2.3.10.937 | ||
| Bindery file server. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| pserverBindery9 | 1.3.6.1.4.1.368.2.3.10.938 | ||
| Bindery file server. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| pserverBindery10 | 1.3.6.1.4.1.368.2.3.10.939 | ||
| Bindery file server. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| pserverBindery11 | 1.3.6.1.4.1.368.2.3.10.940 | ||
| Bindery file server. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| pserverBindery12 | 1.3.6.1.4.1.368.2.3.10.941 | ||
| Bindery file server. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| pserverBindery13 | 1.3.6.1.4.1.368.2.3.10.942 | ||
| Bindery file server. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| pserverBindery14 | 1.3.6.1.4.1.368.2.3.10.943 | ||
| Bindery file server. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| pserverBindery15 | 1.3.6.1.4.1.368.2.3.10.944 | ||
| Bindery file server. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| pserverBindery16 | 1.3.6.1.4.1.368.2.3.10.945 | ||
| Bindery file server. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| nprinter1 | 1.3.6.1.4.1.368.2.3.10.970 | ||
| Pserver name and slot number on pserver. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| nprinter2 | 1.3.6.1.4.1.368.2.3.10.971 | ||
| Pserver name and slot number on pserver. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| nprinter3 | 1.3.6.1.4.1.368.2.3.10.972 | ||
| Pserver name and slot number on pserver. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| nprinter4 | 1.3.6.1.4.1.368.2.3.10.973 | ||
| Pserver name and slot number on pserver. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| nprinter5 | 1.3.6.1.4.1.368.2.3.10.974 | ||
| Pserver name and slot number on pserver. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| nprinter6 | 1.3.6.1.4.1.368.2.3.10.975 | ||
| Pserver name and slot number on pserver. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| nprinter7 | 1.3.6.1.4.1.368.2.3.10.976 | ||
| Pserver name and slot number on pserver. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| nprinter8 | 1.3.6.1.4.1.368.2.3.10.977 | ||
| Pserver name and slot number on pserver. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| PortEntry | |||
| SEQUENCE | |||
| INTEGER as portIndex | |||
| DisplayString as portDescr | |||
| INTEGER as portOnLine | |||
| INTEGER as portBusy | |||
| INTEGER as portEndOfForms | |||
| INTEGER as portFault | |||
| Gauge as portOutputBytes | |||
| Gauge as portInputBytes | |||
| Counter as portPrintouts | |||
| INTEGER as portAvailable | |||
| INTEGER as portIsInput | |||
| PortStats | |||
| SEQUENCE | |||
| INTEGER as portIndex | |||
| Counter as portOutputBytes | |||
| Counter as portInputBytes | |||
| AdminMenu | |||
| SEQUENCE | |||
| INTEGER as adminUnitStatus | |||
| INTEGER as adminConfigStatus | |||
| IpAddress as adminOldIntAddr | |||
| ConfigMenu | |||
| SEQUENCE | |||
| PhysAddress as ethAddr | |||
| DisplayString as rootPwd | |||
| DisplayString as users | |||
| INTEGER as hpJetadmin | |||
| INTEGER as axisPrintSystem | |||
| INTEGER as defOut | |||
| DisplayString as baseUrl | |||
| TCPIPMenu | |||
| SEQUENCE | |||
| IpAddress as intAddr | |||
| IpAddress as defRout | |||
| IpAddress as netMask | |||
| INTEGER as tcpEnb | |||
| OCTET STRING as tcpKey | |||
| DisplayString as prosPwd | |||
| INTEGER as prosPrt | |||
| INTEGER as lpdBanner | |||
| INTEGER as rtnOpt | |||
| INTEGER as rTelPr1 | |||
| INTEGER as rTelPr2 | |||
| INTEGER as rTelPr3 | |||
| INTEGER as rTelPr4 | |||
| INTEGER as rTelPr5 | |||
| INTEGER as rTelPr6 | |||
| INTEGER as rTelPr7 | |||
| INTEGER as rTelPr8 | |||
| INTEGER as dnsEnb | |||
| IpAddress as dnsPrimaryAddr | |||
| IpAddress as dnsSecondaryAddr | |||
| DisplayString as ipDomain | |||
| DisplayString as slpScopeList | |||
| INTEGER as winsEnb | |||
| IpAddress as winsPrimaryAddr | |||
| IpAddress as winsSecondaryAddr | |||
| DisplayString as nbtScopeId | |||
| INTEGER as dhcpEnb | |||
| INTEGER as bootpEnb | |||
| INTEGER as rarpEnb | |||
| SnmpMenu | |||
| SEQUENCE | |||
| DisplayString as readCommunity | |||
| DisplayString as writeCommunity | |||
| IpAddress as trapAddress | |||
| DisplayString as trapCommunity | |||
| INTEGER as enableAuthenTraps | |||
| INTEGER as enablePrinterTraps | |||
| NetwareMenu | |||
| SEQUENCE | |||
| INTEGER as netwEnb | |||
| DisplayString as psName | |||
| DisplayString as confServ | |||
| INTEGER as psPoll | |||
| INTEGER as autoScan | |||
| INTEGER as fr-802-3 | |||
| INTEGER as fr-eth-2 | |||
| INTEGER as fr-802-2 | |||
| INTEGER as fr-snap | |||
| DisplayString as login1 | |||
| DisplayString as login2 | |||
| DisplayString as login3 | |||
| DisplayString as login4 | |||
| DisplayString as login5 | |||
| DisplayString as login6 | |||
| DisplayString as login7 | |||
| DisplayString as login8 | |||
| DisplayString as login9 | |||
| DisplayString as login10 | |||
| DisplayString as login11 | |||
| DisplayString as login12 | |||
| DisplayString as login13 | |||
| DisplayString as login14 | |||
| DisplayString as login15 | |||
| DisplayString as login16 | |||
| DisplayString as rprinter1 | |||
| DisplayString as rprinter2 | |||
| DisplayString as rprinter3 | |||
| DisplayString as rprinter4 | |||
| DisplayString as rprinter5 | |||
| DisplayString as rprinter6 | |||
| DisplayString as rprinter7 | |||
| DisplayString as rprinter8 | |||
| LServLMgrMenu | |||
| SEQUENCE | |||
| INTEGER as lslmEnb | |||
| INTEGER as lslmFrameType | |||
| DisplayString as lPrint1 | |||
| INTEGER as lLogic1 | |||
| DisplayString as lPrint2 | |||
| INTEGER as lLogic2 | |||
| DisplayString as lPrint3 | |||
| INTEGER as lLogic3 | |||
| DisplayString as lPrint4 | |||
| INTEGER as lLogic4 | |||
| DisplayString as lPrint5 | |||
| INTEGER as lLogic5 | |||
| DisplayString as lPrint6 | |||
| INTEGER as lLogic6 | |||
| DisplayString as lPrint7 | |||
| INTEGER as lLogic7 | |||
| DisplayString as lPrint8 | |||
| INTEGER as lLogic8 | |||
| AppletalkMenu | |||
| SEQUENCE | |||
| INTEGER as atlkEnb | |||
| OCTET STRING as atlkKey | |||
| DisplayString as atlkZone | |||
| INTEGER as atlkHPZoner | |||
| INTEGER as atlkFont | |||
| INTEGER as atlkBinary | |||
| INTEGER as atlkBinaryType | |||
| DisplayString as aPrint1 | |||
| DisplayString as aType1 | |||
| INTEGER as aLogic1 | |||
| INTEGER as aBinaryType1 | |||
| DisplayString as aPrint2 | |||
| DisplayString as aType2 | |||
| INTEGER as aLogic2 | |||
| INTEGER as aBinaryType2 | |||
| DisplayString as aPrint3 | |||
| DisplayString as aType3 | |||
| INTEGER as aLogic3 | |||
| INTEGER as aBinaryType3 | |||
| LogPrEntry | |||
| SEQUENCE | |||
| INTEGER as logPrIndex | |||
| INTEGER as logPrOut | |||
| INTEGER as logPrScnd | |||
| INTEGER as logPrWait | |||
| INTEGER as logPrIn | |||
| OCTET STRING as logPrBef | |||
| OCTET STRING as logPrStr | |||
| INTEGER as logPrCset | |||
| INTEGER as logPrFilt | |||
| OCTET STRING as logPrAft | |||
| INTEGER as logPrDump | |||
| INTEGER as logPrSize | |||
| INTEGER as logPrOrnt | |||
| DisplayString as logPrForm | |||
| DisplayString as logPrFont | |||
| OutputMenu | |||
| SEQUENCE | |||
| INTEGER as centrLPT1 | |||
| INTEGER as bsyTimLPT1 | |||
| INTEGER as mgmInfoLPT1 | |||
| DisplayString as comLPT1 | |||
| INTEGER as bidirLPT1 | |||
| INTEGER as readTimCOM1 | |||
| INTEGER as handshCOM1 | |||
| INTEGER as baudrCOM1 | |||
| INTEGER as stopBitsCOM1 | |||
| INTEGER as parityCOM1 | |||
| INTEGER as noBitsCOM1 | |||
| INTEGER as bsyTimCOM1 | |||
| INTEGER as mgmInfoCOM1 | |||
| DisplayString as comCOM1 | |||
| INTEGER as centrLPT2 | |||
| INTEGER as bsyTimLPT2 | |||
| INTEGER as mgmInfoLPT2 | |||
| DisplayString as comLPT2 | |||
| INTEGER as bidirLPT2 | |||
| PanelMenu | |||
| SEQUENCE | |||
| INTEGER as defOut | |||
| NDS-NetwareMenu | |||
| SEQUENCE | |||
| INTEGER as nds-netwEnb | |||
| DisplayString as nds-psName | |||
| INTEGER as jobCheckDelay | |||
| INTEGER as confCheckDelay | |||
| INTEGER as nds-fr-802-3 | |||
| INTEGER as nds-fr-eth-2 | |||
| INTEGER as nds-fr-802-2 | |||
| INTEGER as nds-fr-snap | |||
| DisplayString as pserverNDS | |||
| DisplayString as pserverBindery1 | |||
| DisplayString as pserverBindery2 | |||
| DisplayString as pserverBindery3 | |||
| DisplayString as pserverBindery4 | |||
| DisplayString as pserverBindery5 | |||
| DisplayString as pserverBindery6 | |||
| DisplayString as pserverBindery7 | |||
| DisplayString as pserverBindery8 | |||
| DisplayString as pserverBindery9 | |||
| DisplayString as pserverBindery10 | |||
| DisplayString as pserverBindery11 | |||
| DisplayString as pserverBindery12 | |||
| DisplayString as pserverBindery13 | |||
| DisplayString as pserverBindery14 | |||
| DisplayString as pserverBindery15 | |||
| DisplayString as pserverBindery16 | |||
| DisplayString as nprinter1 | |||
| DisplayString as nprinter2 | |||
| DisplayString as nprinter3 | |||
| DisplayString as nprinter4 | |||
| DisplayString as nprinter5 | |||
| DisplayString as nprinter6 | |||
| DisplayString as nprinter7 | |||
| DisplayString as nprinter8 | |||