BAS-ALIAS-CABLE-DEVICE-MIB

File: BAS-ALIAS-CABLE-DEVICE-MIB.mib (56251 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC BAS-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE IpAddress
Unsigned32 Integer32 Counter32
DisplayString RowStatus DateAndTime
TruthValue TEXTUAL-CONVENTION basAliasDocsCd
BasChassisId BasSlotId BasInterfaceId
BasLogicalPortId

Defined Objects

basAliasDocsCdMib 1.3.6.1.4.1.3493.2.7.9.1
This MIB module defines the Alias DocsCd MIB objects for a Broadband Access System Cluster.
MODULE-IDENTITY    

basDocsDevMIBObjects 1.3.6.1.4.1.3493.2.7.9.1.1
OBJECT IDENTIFIER    

basDocsDevBase 1.3.6.1.4.1.3493.2.7.9.1.1.1
OBJECT IDENTIFIER    

basDocsDevBaseTable 1.3.6.1.4.1.3493.2.7.9.1.1.1.1
OBJECT-TYPE    
  SEQUENCE OF  
    BasDocsDevBaseEntry

basDocsDevBaseEntry 1.3.6.1.4.1.3493.2.7.9.1.1.1.1.1
OBJECT-TYPE    
  BasDocsDevBaseEntry  

basDocsDevRole 1.3.6.1.4.1.3493.2.7.9.1.1.1.1.1.1
Defines the current role of this device.
OBJECT-TYPE    
  INTEGER cm(1), cmtsActive(2), cmtsBackup(3)  

basDocsDevDateTime 1.3.6.1.4.1.3493.2.7.9.1.1.1.1.1.2
The date and time, with optional timezone information.
OBJECT-TYPE    
  DateAndTime  

basDocsDevResetNow 1.3.6.1.4.1.3493.2.7.9.1.1.1.1.1.3
Setting this object to true(1) causes the device to reset. Reading this object always returns false(2).
OBJECT-TYPE    
  TruthValue  

basDocsDevSerialNumber 1.3.6.1.4.1.3493.2.7.9.1.1.1.1.1.4
The manufacturer's serial number for this device.
OBJECT-TYPE    
  DisplayString  

basDocsDevSTPControl 1.3.6.1.4.1.3493.2.7.9.1.1.1.1.1.5
This object controls operation of the spanning tree protocol (as distinguished from transparent bridging). If set to stEnabled(1) then the spanning tree protocol is enabled, subject to bridging constraints. If noStFilterBpdu(2), then spanning tree is not active, and Bridge PDUs received are discarded. If noStPassBpdu(3) then spanning tree is not active and Bridge PDUs are transparently forwarded. Note that a device need not implement all of these options, but that noStFilterBpdu(2) is required.
OBJECT-TYPE    
  INTEGER stEnabled(1), noStFilterBpdu(2), noStPassBpdu(3)  

basDocsDevChassis 1.3.6.1.4.1.3493.2.7.9.1.1.1.1.1.6
The BAS Chassis ID of this card.
OBJECT-TYPE    
  BasChassisId  

basDocsDevSlot 1.3.6.1.4.1.3493.2.7.9.1.1.1.1.1.7
The BAS Slot ID of this card.
OBJECT-TYPE    
  BasSlotId  

basDocsDevIf 1.3.6.1.4.1.3493.2.7.9.1.1.1.1.1.8
The BAS interface ID of this card.
OBJECT-TYPE    
  BasInterfaceId  

basDocsDevLPort 1.3.6.1.4.1.3493.2.7.9.1.1.1.1.1.9
The BAS logical port ID of this card.
OBJECT-TYPE    
  BasLogicalPortId  

basDocsDevNmAccessTable 1.3.6.1.4.1.3493.2.7.9.1.1.2
This table controls access to SNMP objects by network management stations. If the table is empty, access to SNMP objects is unrestricted.
OBJECT-TYPE    
  SEQUENCE OF  
    BasDocsDevNmAccessEntry

basDocsDevNmAccessEntry 1.3.6.1.4.1.3493.2.7.9.1.1.2.1
Controls access to SNMP objects by a particular network management station. For each entry in this table, the contents are not readable unless the management station has read-write permission.
OBJECT-TYPE    
  BasDocsDevNmAccessEntry  

basDocsDevNmAccessIndex 1.3.6.1.4.1.3493.2.7.9.1.1.2.1.1
Index used to order the application of access entries.
OBJECT-TYPE    
  INTEGER 1..2147483647  

basDocsDevNmAccessIp 1.3.6.1.4.1.3493.2.7.9.1.1.2.1.2
The IP address (or subnet) of the network management station. The address 255.255.255.255 is defined to mean any NMS. If traps are enabled for this entry, then the value must be the address of a specific device.
OBJECT-TYPE    
  IpAddress  

basDocsDevNmAccessIpMask 1.3.6.1.4.1.3493.2.7.9.1.1.2.1.3
The IP subnet mask of the network management stations. If traps are enabled for this entry, then the value must be 255.255.255.255.
OBJECT-TYPE    
  IpAddress  

basDocsDevNmAccessCommunity 1.3.6.1.4.1.3493.2.7.9.1.1.2.1.4
The community string to be matched for access by this entry. If set to the null string then any community string will match.
OBJECT-TYPE    
  DisplayString  

basDocsDevNmAccessControl 1.3.6.1.4.1.3493.2.7.9.1.1.2.1.5
Specifies the type of access allowed to this NMS. Setting this object to none(1) causes the table entry to be destroyed. Read(2) allows access by 'get' and 'get-next' PDUs. ReadWrite(3) allows access by 'set' as well. RoWithtraps(4), rwWithTraps(5), and trapsOnly(6) control distribution of Trap PDUs transmitted by this device.
OBJECT-TYPE    
  INTEGER none(1), read(2), readWrite(3), roWithTraps(4), rwWithTraps(5), trapsOnly(6)  

basDocsDevNmAccessInterfaces 1.3.6.1.4.1.3493.2.7.9.1.1.2.1.6
Specifies the set of interfaces from which requests from this NMS will be accepted. Each octet within the value of this object specifies a set of eight interfaces, with the first octet specifying ports 1 through 8, the second octet specifying interfaces 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered interface, and the least significant bit represents the highest numbered interface. Thus, each interface is represented by a single bit within the value of this object. If that bit has a value of '1' then that interface is included in the set. Note that entries in this table apply only to link-layer interfaces (e.g., Ethernet and CATV MAC). Upstream and downstream channel interfaces must not be specified.
OBJECT-TYPE    
  OCTET STRING  

basDocsDevNmAccessStatus 1.3.6.1.4.1.3493.2.7.9.1.1.2.1.7
Controls and reflects the status of rows in this table.
OBJECT-TYPE    
  RowStatus  

basDocsDevNmAccessChassis 1.3.6.1.4.1.3493.2.7.9.1.1.2.1.8
The BAS Chassis ID of this card.
OBJECT-TYPE    
  BasChassisId  

basDocsDevNmAccessSlot 1.3.6.1.4.1.3493.2.7.9.1.1.2.1.9
The BAS Slot ID of this card.
OBJECT-TYPE    
  BasSlotId  

basDocsDevNmAccessIf 1.3.6.1.4.1.3493.2.7.9.1.1.2.1.10
The BAS interface ID of this card.
OBJECT-TYPE    
  BasInterfaceId  

basDocsDevNmAccessLPort 1.3.6.1.4.1.3493.2.7.9.1.1.2.1.11
The BAS logical port ID of this card.
OBJECT-TYPE    
  BasLogicalPortId  

basDocsDevSoftware 1.3.6.1.4.1.3493.2.7.9.1.1.3
OBJECT IDENTIFIER    

basDocsDevSwTable 1.3.6.1.4.1.3493.2.7.9.1.1.3.1
OBJECT-TYPE    
  SEQUENCE OF  
    BasDocsDevSwEntry

basDocsDevSwEntry 1.3.6.1.4.1.3493.2.7.9.1.1.3.1.1
OBJECT-TYPE    
  BasDocsDevSwEntry  

basDocsDevSwServer 1.3.6.1.4.1.3493.2.7.9.1.1.3.1.1.1
The address of the TFTP server used for software upgrades.
OBJECT-TYPE    
  IpAddress  

basDocsDevSwFilename 1.3.6.1.4.1.3493.2.7.9.1.1.3.1.1.2
The file name of the software image to be loaded into this device. Unless set via SNMP, this is the file name specified by the provisioning server that corresponds to the software version that is desired for this device. If unknown, the string '(unknown)' is returned.
OBJECT-TYPE    
  DisplayString SIZE(0..64)  

basDocsDevSwAdminStatus 1.3.6.1.4.1.3493.2.7.9.1.1.3.1.1.3
If set to upgradeFromMgt(1), the device will initiate a TFTP software image download using docsDevSwFilename. After successfully receiving an image, the device will set its state to ignoreProvisioningUpgrade(3) and reboot. If the download process is interrupted by a reset or power failure, the device will load the previous image and, after re-initialization, continue to attempt loading the image specified in docsDevSwFilename. If set to allowProvisioningUpgrade(2), the device will use the software version information supplied by the provisioning server when next rebooting (this does not cause a reboot). When set to ignoreProvisioningUpgrade(3), the device will disregard software image upgrade information from the provisioning server. Note that reading this object can return upgradeFromMgt(1). This indicates that a software download is currently in progress, and that the device will reboot after successfully receiving an image.
OBJECT-TYPE    
  INTEGER upgradeFromMgt(1), allowProvisioningUpgrade(2), ignoreProvisioningUpgrade(3)  

basDocsDevSwOperStatus 1.3.6.1.4.1.3493.2.7.9.1.1.3.1.1.4
InProgress(1) indicates that a TFTP download is underway, either as a result of a version mismatch at provisioning or as a result of a upgradeFromMgt request. CompleteFromProvisioning(2) indicates that the last software upgrade was a result of version mismatch at provisioning. CompleteFromMgt(3) indicates that the last software upgrade was a result of setting docsDevSwAdminStatus to upgradeFromMgt. Failed(4) indicates that the last attempted download failed, ordinarily due to TFTP timeout.
OBJECT-TYPE    
  INTEGER inProgress(1), completeFromProvisioning(2), completeFromMgt(3), failed(4), other(5)  

basDocsDevSwChassis 1.3.6.1.4.1.3493.2.7.9.1.1.3.1.1.5
The BAS Chassis ID of this card.
OBJECT-TYPE    
  BasChassisId  

basDocsDevSwSlot 1.3.6.1.4.1.3493.2.7.9.1.1.3.1.1.6
The BAS Slot ID of this card.
OBJECT-TYPE    
  BasSlotId  

basDocsDevSwIf 1.3.6.1.4.1.3493.2.7.9.1.1.3.1.1.7
The BAS interface ID of this card.
OBJECT-TYPE    
  BasInterfaceId  

basDocsDevSwLPort 1.3.6.1.4.1.3493.2.7.9.1.1.3.1.1.8
The BAS logical port ID of this card.
OBJECT-TYPE    
  BasLogicalPortId  

basDocsDevServer 1.3.6.1.4.1.3493.2.7.9.1.1.4
OBJECT IDENTIFIER    

basDocsDevServerTable 1.3.6.1.4.1.3493.2.7.9.1.1.4.1
OBJECT-TYPE    
  SEQUENCE OF  
    BasDocsDevServerEntry

basDocsDevServerEntry 1.3.6.1.4.1.3493.2.7.9.1.1.4.1.1
OBJECT-TYPE    
  BasDocsDevServerEntry  

basDocsDevServerBootState 1.3.6.1.4.1.3493.2.7.9.1.1.4.1.1.1
If operational(1), the device has completed loading and processing of configuration parameters and the CMTS has completed the Registration exchange. If disabled(2) then the device was administratively disabled, possibly by being refused network access in the configuration file. If waitingForDhcpOffer(3) then a DHCP Discover has been transmitted and no offer has yet been received. If waitingForDhcpResponse(4) then a DHCP Request has been transmitted and no response has yet been received. If waitingForTimeServer(5) then a Time Request has been transmitted and no response has yet been received. If waitingForTftp(6) then a request to the TFTP parameter server has been made and no response received. If refusedByCmts(7) then the Registration Request/Response exchange with the CMTS failed. If forwardingDenied(8) then the registration process completed, but the network access option in the received configuration file prohibits forwarding.
OBJECT-TYPE    
  INTEGER operational(1), disabled(2), waitingForDhcpOffer(3), waitingForDhcpResponse(4), waitingForTimeServer(5), waitingForTftp(6), refusedByCmts(7), forwardingDenied(8), other(9), unknown(10)  

basDocsDevServerDhcp 1.3.6.1.4.1.3493.2.7.9.1.1.4.1.1.2
The IP address of the DHCP server that assigned an IP address to this device. Returns 0.0.0.0 if DHCP was not used for IP address assignment.
OBJECT-TYPE    
  IpAddress  

basDocsDevServerTime 1.3.6.1.4.1.3493.2.7.9.1.1.4.1.1.3
The IP address of the Time server (RFC-868).
OBJECT-TYPE    
  IpAddress  

basDocsDevServerTftp 1.3.6.1.4.1.3493.2.7.9.1.1.4.1.1.4
The IP address of the TFTP server responsible for downloading provisioning and configuration parameters to this device.
OBJECT-TYPE    
  IpAddress  

basDocsDevServerConfigFile 1.3.6.1.4.1.3493.2.7.9.1.1.4.1.1.5
The name of the device configuration file read from the TFTP server.
OBJECT-TYPE    
  DisplayString  

basDocsDevServerChassis 1.3.6.1.4.1.3493.2.7.9.1.1.4.1.1.6
The BAS Chassis ID of this card.
OBJECT-TYPE    
  BasChassisId  

basDocsDevServerSlot 1.3.6.1.4.1.3493.2.7.9.1.1.4.1.1.7
The BAS Slot ID of this card.
OBJECT-TYPE    
  BasSlotId  

basDocsDevServerIf 1.3.6.1.4.1.3493.2.7.9.1.1.4.1.1.8
The BAS interface ID of this card.
OBJECT-TYPE    
  BasInterfaceId  

basDocsDevServerLPort 1.3.6.1.4.1.3493.2.7.9.1.1.4.1.1.9
The BAS logical port ID of this card.
OBJECT-TYPE    
  BasLogicalPortId  

basDocsDevEvent 1.3.6.1.4.1.3493.2.7.9.1.1.5
OBJECT IDENTIFIER    

basDocsDevEvTable 1.3.6.1.4.1.3493.2.7.9.1.1.5.1
OBJECT-TYPE    
  SEQUENCE OF  
    BasDocsDevEvEntry

basDocsDevEvEntry 1.3.6.1.4.1.3493.2.7.9.1.1.5.1.1
OBJECT-TYPE    
  BasDocsDevEvEntry  

basDocsDevEvControl 1.3.6.1.4.1.3493.2.7.9.1.1.5.1.1.1
Setting this object to resetLog(1) empties the event log. All data is deleted. Setting it to useDefaultReporting(2) returns all event priorities to their factory-default reporting. Reading this object always returns useDefaultReporting(2).
OBJECT-TYPE    
  INTEGER resetLog(1), useDefaultReporting(2)  

basDocsDevEvSyslog 1.3.6.1.4.1.3493.2.7.9.1.1.5.1.1.2
The IP address of the Syslog server. If 0.0.0.0, syslog transmission is inhibited.
OBJECT-TYPE    
  IpAddress  

basDocsDevEvThrottleAdminStatus 1.3.6.1.4.1.3493.2.7.9.1.1.5.1.1.3
Controls the transmission of traps and syslog messages with respect to the trap pacing threshold. unconstrained(1) causes traps and syslog messages to be transmitted without regard to the threshold settings. maintainBelowThreshold(2) causes trap transmission and syslog messages to be suppressed if the number of traps would otherwise exceed the threshold. stopAtThreshold(3) causes trap transmission to cease at the threshold, and not resume until directed to do so. inhibited(4) causes all trap transmission and syslog messages to be suppressed. A single event is always treated as a single event for threshold counting. That is, an event causing both a trap and a syslog message is still treated as a single event. Writing to this object resets the thresholding state.
OBJECT-TYPE    
  INTEGER unconstrained(1), maintainBelowThreshold(2), stopAtThreshold(3), inhibited(4)  

basDocsDevEvThrottleInhibited 1.3.6.1.4.1.3493.2.7.9.1.1.5.1.1.4
If true(1), trap and syslog transmission is currently inhibited due to thresholds and/or the current setting of docsDevEvThrottleAdminStatus.
OBJECT-TYPE    
  TruthValue  

basDocsDevEvThrottleThreshold 1.3.6.1.4.1.3493.2.7.9.1.1.5.1.1.5
Number of trap/syslog events per docsDevEvThrottleInterval to be transmitted before throttling. A single event is always treated as a single event for threshold counting. That is, an event causing both a trap and a syslog message is still treated as a single event.
OBJECT-TYPE    
  Unsigned32  

basDocsDevEvThrottleInterval 1.3.6.1.4.1.3493.2.7.9.1.1.5.1.1.6
The interval over which the trap threshold applies.
OBJECT-TYPE    
  INTEGER 1..2147483647  

basDocsDevEvChassis 1.3.6.1.4.1.3493.2.7.9.1.1.5.1.1.7
The BAS Chassis ID of this card.
OBJECT-TYPE    
  BasChassisId  

basDocsDevEvSlot 1.3.6.1.4.1.3493.2.7.9.1.1.5.1.1.8
The BAS Slot ID of this card.
OBJECT-TYPE    
  BasSlotId  

basDocsDevEvIf 1.3.6.1.4.1.3493.2.7.9.1.1.5.1.1.9
The BAS interface ID of this card.
OBJECT-TYPE    
  BasInterfaceId  

basDocsDevEvLPort 1.3.6.1.4.1.3493.2.7.9.1.1.5.1.1.10
The BAS logical port ID of this card.
OBJECT-TYPE    
  BasLogicalPortId  

basDocsDevEvControlTable 1.3.6.1.4.1.3493.2.7.9.1.1.5.7
Allows control of the reporting of event classes.
OBJECT-TYPE    
  SEQUENCE OF  
    BasDocsDevEvControlEntry

basDocsDevEvControlEntry 1.3.6.1.4.1.3493.2.7.9.1.1.5.7.1
Allows configuration of the reporting mechanisms for a particular event priority.
OBJECT-TYPE    
  BasDocsDevEvControlEntry  

basDocsDevEvPriority 1.3.6.1.4.1.3493.2.7.9.1.1.5.7.1.1
The priority level that is controlled by this entry.
OBJECT-TYPE    
  INTEGER emergency(1), alert(2), critical(3), error(4), warning(5), notice(6), information(7), debug(8)  

basDocsDevEvReporting 1.3.6.1.4.1.3493.2.7.9.1.1.5.7.1.2
Defines the action to be taken on occurrence of this event class. Implementations may not necessarily support all options for all event classes, but at minimum must allow traps and syslogging to be disabled.
OBJECT-TYPE    
  BITS local(0), traps(1), syslog(2)  

basDocsDevEvControlChassis 1.3.6.1.4.1.3493.2.7.9.1.1.5.7.1.3
The BAS Chassis ID of this card.
OBJECT-TYPE    
  BasChassisId  

basDocsDevEvControlSlot 1.3.6.1.4.1.3493.2.7.9.1.1.5.7.1.4
The BAS Slot ID of this card.
OBJECT-TYPE    
  BasSlotId  

basDocsDevEvControlIf 1.3.6.1.4.1.3493.2.7.9.1.1.5.7.1.5
The BAS interface ID of this card.
OBJECT-TYPE    
  BasInterfaceId  

basDocsDevEvControlLPort 1.3.6.1.4.1.3493.2.7.9.1.1.5.7.1.6
The BAS logical port ID of this card.
OBJECT-TYPE    
  BasLogicalPortId  

basDocsDevEventTable 1.3.6.1.4.1.3493.2.7.9.1.1.5.8
Contains a log of network and device events that may be of interest in fault isolation and troubleshooting.
OBJECT-TYPE    
  SEQUENCE OF  
    BasDocsDevEventEntry

basDocsDevEventEntry 1.3.6.1.4.1.3493.2.7.9.1.1.5.8.1
Describes a network or device event that may be of interest in fault isolation and troubleshooting.
OBJECT-TYPE    
  BasDocsDevEventEntry  

basDocsDevEvIndex 1.3.6.1.4.1.3493.2.7.9.1.1.5.8.1.1
Provides relative ordering of the objects in the event log. This object will always increase except when (a) the log is reset via docsDevEvControl, (b) the device reboots and does not implement nonvolatile storage for this log, or (c) it reaches the value 2^31. The next entry for all the above cases is 1.
OBJECT-TYPE    
  INTEGER 1..2147483647  

basDocsDevEvFirstTime 1.3.6.1.4.1.3493.2.7.9.1.1.5.8.1.2
The time that this entry was created.
OBJECT-TYPE    
  DateAndTime  

basDocsDevEvLastTime 1.3.6.1.4.1.3493.2.7.9.1.1.5.8.1.3
If multiple events are reported via the same entry, the time that the last event for this entry occurred.
OBJECT-TYPE    
  DateAndTime  

basDocsDevEvCount 1.3.6.1.4.1.3493.2.7.9.1.1.5.8.1.4
The number of consecutive event instances reported by this entry.
OBJECT-TYPE    
  Counter32  

basDocsDevEvLevel 1.3.6.1.4.1.3493.2.7.9.1.1.5.8.1.5
The priority level of this event.
OBJECT-TYPE    
  INTEGER emergency(1), alert(2), critical(3), error(4), warning(5), notice(6), information(7), debug(8)  

basDocsDevEvId 1.3.6.1.4.1.3493.2.7.9.1.1.5.8.1.6
For this product, uniquely identifies the type of event that is reported by this entry.
OBJECT-TYPE    
  Unsigned32  

basDocsDevEvText 1.3.6.1.4.1.3493.2.7.9.1.1.5.8.1.7
Provides a human-readable description of the event, including all relevant context (interface numbers, etc.).
OBJECT-TYPE    
  DisplayString  

basDocsDevEvEventChassis 1.3.6.1.4.1.3493.2.7.9.1.1.5.8.1.8
The BAS Chassis ID of this card.
OBJECT-TYPE    
  BasChassisId  

basDocsDevEvEventSlot 1.3.6.1.4.1.3493.2.7.9.1.1.5.8.1.9
The BAS Slot ID of this card.
OBJECT-TYPE    
  BasSlotId  

basDocsDevEvEventIf 1.3.6.1.4.1.3493.2.7.9.1.1.5.8.1.10
The BAS interface ID of this card.
OBJECT-TYPE    
  BasInterfaceId  

basDocsDevEvEventLPort 1.3.6.1.4.1.3493.2.7.9.1.1.5.8.1.11
The BAS logical port ID of this card.
OBJECT-TYPE    
  BasLogicalPortId  

basDocsDevFilter 1.3.6.1.4.1.3493.2.7.9.1.1.6
OBJECT IDENTIFIER    

basDocsDevFilterTable 1.3.6.1.4.1.3493.2.7.9.1.1.6.1
Contains a log of network and device events that may be of interest in fault isolation and troubleshooting.
OBJECT-TYPE    
  SEQUENCE OF  
    BasDocsDevFilterEntry

basDocsDevFilterEntry 1.3.6.1.4.1.3493.2.7.9.1.1.6.1.1
Describes a network or device event that may be of interest in fault isolation and troubleshooting.
OBJECT-TYPE    
  BasDocsDevFilterEntry  

basDocsDevFilterLLCDefault 1.3.6.1.4.1.3493.2.7.9.1.1.6.1.1.1
If set to discard(1), all packets not matching an LLC filter will be discarded. If set to accept(2), all packets not matching an LLC filter will be accepted for further processing (e.g., bridging).
OBJECT-TYPE    
  INTEGER discard(1), accept(2)  

basDocsDevFilterChassis 1.3.6.1.4.1.3493.2.7.9.1.1.6.1.1.2
The BAS Chassis ID of this card.
OBJECT-TYPE    
  BasChassisId  

basDocsDevFilterSlot 1.3.6.1.4.1.3493.2.7.9.1.1.6.1.1.3
The BAS Slot ID of this card.
OBJECT-TYPE    
  BasSlotId  

basDocsDevFilterIf 1.3.6.1.4.1.3493.2.7.9.1.1.6.1.1.4
The BAS interface ID of this card.
OBJECT-TYPE    
  BasInterfaceId  

basDocsDevFilterLPort 1.3.6.1.4.1.3493.2.7.9.1.1.6.1.1.5
The BAS logical port ID of this card.
OBJECT-TYPE    
  BasLogicalPortId  

basDocsDevFilterLLCTable 1.3.6.1.4.1.3493.2.7.9.1.1.6.2
A list of filters to apply to (bridged) LLC traffic, which forwards or drops packets on the basis of the layer three protocol type.
OBJECT-TYPE    
  SEQUENCE OF  
    BasDocsDevFilterLLCEntry

basDocsDevFilterLLCEntry 1.3.6.1.4.1.3493.2.7.9.1.1.6.2.1
Describes a single filter to apply to (bridged) LLC traffic received on a specified interface.
OBJECT-TYPE    
  BasDocsDevFilterLLCEntry  

basDocsDevFilterLLCIndex 1.3.6.1.4.1.3493.2.7.9.1.1.6.2.1.1
Index used for the identification of filters (note that LLC filter order is irrelevant).
OBJECT-TYPE    
  INTEGER 1..2147483647  

basDocsDevFilterLLCStatus 1.3.6.1.4.1.3493.2.7.9.1.1.6.2.1.2
Controls and reflects the status of rows in this table.
OBJECT-TYPE    
  RowStatus  

basDocsDevFilterLLCIfIndex 1.3.6.1.4.1.3493.2.7.9.1.1.6.2.1.3
The entry interface to which this filter applies. The value corresponds to ifIndex for either a CATV MAC or another network interface. If the value is zero, the filter applies to all interfaces. In Cable Modems, the default value is the customer side interface. In Cable Modem Termination Systems, this object has to be specified to create a row in this table.
OBJECT-TYPE    
  InterfaceIndexOrZero  

basDocsDevFilterLLCProtocolType 1.3.6.1.4.1.3493.2.7.9.1.1.6.2.1.4
The format of the value in docsDevFilterLLCProtocol: either a two-byte Ethernet Ethertype, or a one-byte 802.2 SAP value. EtherType(1) also applies to SNAP- encapsulated frames.
OBJECT-TYPE    
  INTEGER ethertype(1), dsap(2)  

basDocsDevFilterLLCProtocol 1.3.6.1.4.1.3493.2.7.9.1.1.6.2.1.5
The layer three protocol for which this filter applies. The protocol value format depends on docsDevFilterLLCProtocolType. Note that for SNAP frames, etherType filtering is performed rather than DSAP=0xAA.
OBJECT-TYPE    
  INTEGER 0..65535  

basDocsDevFilterLLCMatches 1.3.6.1.4.1.3493.2.7.9.1.1.6.2.1.6
Counts the number of times this filter was matched.
OBJECT-TYPE    
  Counter32  

basDocsDevFilterLLCChassis 1.3.6.1.4.1.3493.2.7.9.1.1.6.2.1.7
The BAS Chassis ID of this card.
OBJECT-TYPE    
  BasChassisId  

basDocsDevFilterLLCSlot 1.3.6.1.4.1.3493.2.7.9.1.1.6.2.1.8
The BAS Slot ID of this card.
OBJECT-TYPE    
  BasSlotId  

basDocsDevFilterLLCIf 1.3.6.1.4.1.3493.2.7.9.1.1.6.2.1.9
The BAS interface ID of this card.
OBJECT-TYPE    
  BasInterfaceId  

basDocsDevFilterLLCLPort 1.3.6.1.4.1.3493.2.7.9.1.1.6.2.1.10
The BAS logical port ID of this card.
OBJECT-TYPE    
  BasLogicalPortId  

basDocsDevFilterIpDefTable 1.3.6.1.4.1.3493.2.7.9.1.1.6.3
Contains a log of network and device events that may be of interest in fault isolation and troubleshooting.
OBJECT-TYPE    
  SEQUENCE OF  
    BasDocsDevFilterIpDefEntry

basDocsDevFilterIpDefEntry 1.3.6.1.4.1.3493.2.7.9.1.1.6.3.1
Describes a network or device event that may be of interest in fault isolation and troubleshooting.
OBJECT-TYPE    
  BasDocsDevFilterIpDefEntry  

basDocsDevFilterIpDefault 1.3.6.1.4.1.3493.2.7.9.1.1.6.3.1.1
If set to discard(1), all packets not matching an IP filter will be discarded. If set to accept(2), all packets not matching an IP filter will be accepted for further processing (e.g., bridging).
OBJECT-TYPE    
  INTEGER discard(1), accept(2)  

basDocsDevFilterIpDefChassis 1.3.6.1.4.1.3493.2.7.9.1.1.6.3.1.2
The BAS Chassis ID of this card.
OBJECT-TYPE    
  BasChassisId  

basDocsDevFilterIpDefSlot 1.3.6.1.4.1.3493.2.7.9.1.1.6.3.1.3
The BAS Slot ID of this card.
OBJECT-TYPE    
  BasSlotId  

basDocsDevFilterIpDefIf 1.3.6.1.4.1.3493.2.7.9.1.1.6.3.1.4
The BAS interface ID of this card.
OBJECT-TYPE    
  BasInterfaceId  

basDocsDevFilterIpDefLPort 1.3.6.1.4.1.3493.2.7.9.1.1.6.3.1.5
The BAS logical port ID of this card.
OBJECT-TYPE    
  BasLogicalPortId  

basDocsDevFilterIpTable 1.3.6.1.4.1.3493.2.7.9.1.1.6.4
An ordered list of filters to apply to IP traffic. Filter application is ordered by the filter index, rather than by a best match algorithm. Packets which match no filters are discarded or forwarded according to the setting of docsDevFilterIpDefault.
OBJECT-TYPE    
  SEQUENCE OF  
    BasDocsDevFilterIpEntry

basDocsDevFilterIpEntry 1.3.6.1.4.1.3493.2.7.9.1.1.6.4.1
Describes a filter to apply to IP traffic received on a specified interface. Both source and destination addresses must match for the filter to apply.
OBJECT-TYPE    
  BasDocsDevFilterIpEntry  

basDocsDevFilterIpIndex 1.3.6.1.4.1.3493.2.7.9.1.1.6.4.1.1
Index used to order the application of filters. The filter with the lowest index is always applied first.
OBJECT-TYPE    
  INTEGER 1..2147483647  

basDocsDevFilterIpStatus 1.3.6.1.4.1.3493.2.7.9.1.1.6.4.1.2
Controls and reflects the status of rows in this table.
OBJECT-TYPE    
  RowStatus  

basDocsDevFilterIpControl 1.3.6.1.4.1.3493.2.7.9.1.1.6.4.1.3
If set to discard(1), all packets matching this filter will be discarded and scanning of the remainder of the filter list will be aborted. If set to accept(2), all packets matching this filter will be accepted for further processing (e.g., bridging) and scanning of the remainder of the filter list will be aborted.
OBJECT-TYPE    
  INTEGER discard(1), accept(2)  

basDocsDevFilterIpIfIndex 1.3.6.1.4.1.3493.2.7.9.1.1.6.4.1.4
The entry interface to which this filter applies. The value corresponds to ifIndex for either a CATV MAC or another network interface. If the value is zero, the filter applies to all interfaces. Default value in Cable Modems is the customer-side interface. In Cable Modem Termination Systems, this object has to be specified to create a row in this table.
OBJECT-TYPE    
  InterfaceIndexOrZero  

basDocsDevFilterIpDirection 1.3.6.1.4.1.3493.2.7.9.1.1.6.4.1.5
Determines whether the filter is applied to inbound(1) traffic, outbound(2) traffic, or traffic in both(3) directions.
OBJECT-TYPE    
  INTEGER inbound(1), outbound(2), both(3)  

basDocsDevFilterIpBroadcast 1.3.6.1.4.1.3493.2.7.9.1.1.6.4.1.6
If set to true(1), the filter only applies to multicast and broadcast traffic. If set to false(2), the filter applies to all traffic.
OBJECT-TYPE    
  TruthValue  

basDocsDevFilterIpSaddr 1.3.6.1.4.1.3493.2.7.9.1.1.6.4.1.7
The source IP address, or portion thereof, that is to be matched for this filter.
OBJECT-TYPE    
  IpAddress  

basDocsDevFilterIpSmask 1.3.6.1.4.1.3493.2.7.9.1.1.6.4.1.8
A bit mask that is to be applied to the source address prior to matching. This mask is not necessarily the same as a subnet mask, but 1's bits must be leftmost and contiguous.
OBJECT-TYPE    
  IpAddress  

basDocsDevFilterIpDaddr 1.3.6.1.4.1.3493.2.7.9.1.1.6.4.1.9
The destination IP address, or portion thereof, that is to be matched for this filter
OBJECT-TYPE    
  IpAddress  

basDocsDevFilterIpDmask 1.3.6.1.4.1.3493.2.7.9.1.1.6.4.1.10
A bit mask that is to be applied to the destination address prior to matching. This mask is not necessarily the same as a subnet mask, but 1's bits must be leftmost and contiguous
OBJECT-TYPE    
  IpAddress  

basDocsDevFilterIpProtocol 1.3.6.1.4.1.3493.2.7.9.1.1.6.4.1.11
The IP protocol value that is to be matched.
OBJECT-TYPE    
  INTEGER icmp(1), tcp(6), udp(17), any(256)  

basDocsDevFilterIpSourcePortLow 1.3.6.1.4.1.3493.2.7.9.1.1.6.4.1.12
If docsDevFilterIpProtocol is udp or tcp, this is the inclusive lower bound of the transport-layer source port range that is to be matched.
OBJECT-TYPE    
  INTEGER 0..65535  

basDocsDevFilterIpSourcePortHigh 1.3.6.1.4.1.3493.2.7.9.1.1.6.4.1.13
If docsDevFilterIpProtocol is udp or tcp, this is the inclusive upper bound of the transport-layer source port range that is to be matched.
OBJECT-TYPE    
  INTEGER 0..65535  

basDocsDevFilterIpDestPortLow 1.3.6.1.4.1.3493.2.7.9.1.1.6.4.1.14
If docsDevFilterIpProtocol is udp or tcp, this is the inclusive lower bound of the transport-layer destination port range that is to be matched.
OBJECT-TYPE    
  INTEGER 0..65535  

basDocsDevFilterIpDestPortHigh 1.3.6.1.4.1.3493.2.7.9.1.1.6.4.1.15
If docsDevFilterIpProtocol is udp or tcp, this is the inclusive upper bound of the transport-layer destination port range that is to be matched.
OBJECT-TYPE    
  INTEGER 0..65535  

basDocsDevFilterIpMatches 1.3.6.1.4.1.3493.2.7.9.1.1.6.4.1.16
Counts the number of times this filter was matched.
OBJECT-TYPE    
  Counter32  

basDocsDevFilterIpChassis 1.3.6.1.4.1.3493.2.7.9.1.1.6.4.1.17
The BAS Chassis ID of this card.
OBJECT-TYPE    
  BasChassisId  

basDocsDevFilterIpSlot 1.3.6.1.4.1.3493.2.7.9.1.1.6.4.1.18
The BAS Slot ID of this card.
OBJECT-TYPE    
  BasSlotId  

basDocsDevFilterIpIf 1.3.6.1.4.1.3493.2.7.9.1.1.6.4.1.19
The BAS interface ID of this card.
OBJECT-TYPE    
  BasInterfaceId  

basDocsDevFilterIpLPort 1.3.6.1.4.1.3493.2.7.9.1.1.6.4.1.20
The BAS logical port ID of this card.
OBJECT-TYPE    
  BasLogicalPortId  

Defined Objects

InterfaceIndexOrZero  
This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits the additional value of zero. the value zero is object-specific and must therefore be defined as part of the description of any object which uses this syntax. Examples of the usage of zero might include situations where interface was unknown, or when none or all interfaces need to be referenced.
TEXTUAL-CONVENTION    
  Integer32 0..2147483647  

BasDocsDevBaseEntry  
SEQUENCE    
  INTEGER as basDocsDevRole  
  DateAndTime as basDocsDevDateTime  
  TruthValue as basDocsDevResetNow  
  DisplayString as basDocsDevSerialNumber  
  INTEGER as basDocsDevSTPControl  
  BasChassisId as basDocsDevChassis  
  BasSlotId as basDocsDevSlot  
  BasInterfaceId as basDocsDevIf  
  BasLogicalPortId as basDocsDevLPort  

BasDocsDevNmAccessEntry  
SEQUENCE    
  INTEGER as basDocsDevNmAccessIndex  
  IpAddress as basDocsDevNmAccessIp  
  IpAddress as basDocsDevNmAccessIpMask  
  DisplayString as basDocsDevNmAccessCommunity  
  INTEGER as basDocsDevNmAccessControl  
  OCTET STRING as basDocsDevNmAccessInterfaces  
  RowStatus as basDocsDevNmAccessStatus  
  BasChassisId as basDocsDevNmAccessChassis  
  BasSlotId as basDocsDevNmAccessSlot  
  BasInterfaceId as basDocsDevNmAccessIf  
  BasLogicalPortId as basDocsDevNmAccessLPort  

BasDocsDevSwEntry  
SEQUENCE    
  IpAddress as basDocsDevSwServer  
  DisplayString as basDocsDevSwFilename  
  INTEGER as basDocsDevSwAdminStatus  
  INTEGER as basDocsDevSwOperStatus  
  BasChassisId as basDocsDevSwChassis  
  BasSlotId as basDocsDevSwSlot  
  BasInterfaceId as basDocsDevSwIf  
  BasLogicalPortId as basDocsDevSwLPort  

BasDocsDevServerEntry  
SEQUENCE    
  INTEGER as basDocsDevServerBootState  
  IpAddress as basDocsDevServerDhcp  
  IpAddress as basDocsDevServerTime  
  IpAddress as basDocsDevServerTftp  
  DisplayString as basDocsDevServerConfigFile  
  BasChassisId as basDocsDevServerChassis  
  BasSlotId as basDocsDevServerSlot  
  BasInterfaceId as basDocsDevServerIf  
  BasLogicalPortId as basDocsDevServerLPort  

BasDocsDevEvEntry  
SEQUENCE    
  INTEGER as basDocsDevEvControl  
  IpAddress as basDocsDevEvSyslog  
  INTEGER as basDocsDevEvThrottleAdminStatus  
  TruthValue as basDocsDevEvThrottleInhibited  
  Unsigned32 as basDocsDevEvThrottleThreshold  
  INTEGER as basDocsDevEvThrottleInterval  
  BasChassisId as basDocsDevEvChassis  
  BasSlotId as basDocsDevEvSlot  
  BasInterfaceId as basDocsDevEvIf  
  BasLogicalPortId as basDocsDevEvLPort  

BasDocsDevEvControlEntry  
SEQUENCE    
  INTEGER as basDocsDevEvPriority  
  BITS as basDocsDevEvReporting  
  BasChassisId as basDocsDevEvControlChassis  
  BasSlotId as basDocsDevEvControlSlot  
  BasInterfaceId as basDocsDevEvControlIf  
  BasLogicalPortId as basDocsDevEvControlLPort  

BasDocsDevEventEntry  
SEQUENCE    
  INTEGER as basDocsDevEvIndex  
  DateAndTime as basDocsDevEvFirstTime  
  DateAndTime as basDocsDevEvLastTime  
  Counter32 as basDocsDevEvCount  
  INTEGER as basDocsDevEvLevel  
  Unsigned32 as basDocsDevEvId  
  DisplayString as basDocsDevEvText  
  BasChassisId as basDocsDevEvEventChassis  
  BasSlotId as basDocsDevEvEventSlot  
  BasInterfaceId as basDocsDevEvEventIf  
  BasLogicalPortId as basDocsDevEvEventLPort  

BasDocsDevFilterEntry  
SEQUENCE    
  INTEGER as basDocsDevFilterLLCDefault  
  BasChassisId as basDocsDevFilterChassis  
  BasSlotId as basDocsDevFilterSlot  
  BasInterfaceId as basDocsDevFilterIf  
  BasLogicalPortId as basDocsDevFilterLPort  

BasDocsDevFilterLLCEntry  
SEQUENCE    
  INTEGER as basDocsDevFilterLLCIndex  
  RowStatus as basDocsDevFilterLLCStatus  
  InterfaceIndexOrZero as basDocsDevFilterLLCIfIndex  
  INTEGER as basDocsDevFilterLLCProtocolType  
  INTEGER as basDocsDevFilterLLCProtocol  
  Counter32 as basDocsDevFilterLLCMatches  
  BasChassisId as basDocsDevFilterLLCChassis  
  BasSlotId as basDocsDevFilterLLCSlot  
  BasInterfaceId as basDocsDevFilterLLCIf  
  BasLogicalPortId as basDocsDevFilterLLCLPort  

BasDocsDevFilterIpDefEntry  
SEQUENCE    
  INTEGER as basDocsDevFilterIpDefault  
  BasChassisId as basDocsDevFilterIpDefChassis  
  BasSlotId as basDocsDevFilterIpDefSlot  
  BasInterfaceId as basDocsDevFilterIpDefIf  
  BasLogicalPortId as basDocsDevFilterIpDefLPort  

BasDocsDevFilterIpEntry  
SEQUENCE    
  INTEGER as basDocsDevFilterIpIndex  
  RowStatus as basDocsDevFilterIpStatus  
  INTEGER as basDocsDevFilterIpControl  
  InterfaceIndexOrZero as basDocsDevFilterIpIfIndex  
  INTEGER as basDocsDevFilterIpDirection  
  TruthValue as basDocsDevFilterIpBroadcast  
  IpAddress as basDocsDevFilterIpSaddr  
  IpAddress as basDocsDevFilterIpSmask  
  IpAddress as basDocsDevFilterIpDaddr  
  IpAddress as basDocsDevFilterIpDmask  
  INTEGER as basDocsDevFilterIpProtocol  
  INTEGER as basDocsDevFilterIpSourcePortLow  
  INTEGER as basDocsDevFilterIpSourcePortHigh  
  INTEGER as basDocsDevFilterIpDestPortLow  
  INTEGER as basDocsDevFilterIpDestPortHigh  
  Counter32 as basDocsDevFilterIpMatches  
  BasChassisId as basDocsDevFilterIpChassis  
  BasSlotId as basDocsDevFilterIpSlot  
  BasInterfaceId as basDocsDevFilterIpIf  
  BasLogicalPortId as basDocsDevFilterIpLPort