
| RFC1155-SMI | SNMPv2-SMI | HOST-RESOURCES-MIB |
| RFC-1215 | RFC-1212 | RFC1213-MIB |
| DMTF-DMI-MIB |
| dmtf | 1.3.6.1.4.1.412 | ||
| OBJECT IDENTIFIER | |||
| dmtfStdMifs | 1.3.6.1.4.1.412.2 | ||
| OBJECT IDENTIFIER | |||
| dmtfServiceLayerMIF | 1.3.6.1.4.1.412.2.1 | ||
| OBJECT IDENTIFIER | |||
| dMTFComponentIDTable | 1.3.6.1.4.1.412.2.1.1 | ||
| This group defines the attributes common to all components. This group is required. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdMTFComponentID | |||
| dMTFComponentIDEntry | 1.3.6.1.4.1.412.2.1.1.1 | ||
| This group defines the attributes common to all components. This group is required. | |||
| OBJECT-TYPE | |||
| SdMTFComponentID | |||
| manufacturerAtt1 | 1.3.6.1.4.1.412.2.1.1.1.1 | ||
| Manufacturer of this system. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| productAtt2 | 1.3.6.1.4.1.412.2.1.1.1.2 | ||
| Product name for this system. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| versionAtt3 | 1.3.6.1.4.1.412.2.1.1.1.3 | ||
| Version number of this system. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| serialNumberAtt4 | 1.3.6.1.4.1.412.2.1.1.1.4 | ||
| Serial number for this system. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| installationAtt5 | 1.3.6.1.4.1.412.2.1.1.1.5 | ||
| The time and date when this component was installed. | |||
| OBJECT-TYPE | |||
| DmiDate | |||
| verifyAtt6 | 1.3.6.1.4.1.412.2.1.1.1.6 | ||
| A code that provides a level of verification that the component is still installed and working. | |||
| OBJECT-TYPE | |||
| INTEGER | anErrorOccurredCheckStatusCode(0), thisComponentDoesNotExist(1), verificationIsNotSupported(2), reserved(3), thisComponentExistsButTheFunctionalityIsUntested(4), thisComponentExistsButTheFunctionalityIsUnknown(5), thisComponentExistsAndIsNotFunctioningCorrectly(6), thisComponentExistsAndIsFunctioningCorrectly(7) | ||
| dmtfSystemsMIF | 1.3.6.1.4.1.412.2.4 | ||
| OBJECT IDENTIFIER | |||
| dMTFGeneralInformationTable | 1.3.6.1.4.1.412.2.4.1 | ||
| This group defines general information about this system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdMTFGeneralInformation | |||
| dMTFGeneralInformationEntry | 1.3.6.1.4.1.412.2.4.1.1 | ||
| This group defines general information about this system. | |||
| OBJECT-TYPE | |||
| SdMTFGeneralInformation | |||
| systemNameAtt1 | 1.3.6.1.4.1.412.2.4.1.1.1 | ||
| A name to identify this system. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| systemLocationAtt2 | 1.3.6.1.4.1.412.2.4.1.1.2 | ||
| The physical location of this system. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| systemPrimaryUserNameAtt3 | 1.3.6.1.4.1.412.2.4.1.1.3 | ||
| The name of the primary user or owner of this system. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| systemPrimaryUserPhoneAtt4 | 1.3.6.1.4.1.412.2.4.1.1.4 | ||
| The phone number of the primary user of this system. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| systemBootupTimeAtt5 | 1.3.6.1.4.1.412.2.4.1.1.5 | ||
| The time at which the system was last booted. | |||
| OBJECT-TYPE | |||
| DmiDate | |||
| systemDateTimeAtt6 | 1.3.6.1.4.1.412.2.4.1.1.6 | ||
| The actual system date and time. | |||
| OBJECT-TYPE | |||
| DmiDate | |||
| dMTFOperatingSystemTable | 1.3.6.1.4.1.412.2.4.2 | ||
| This group defines general information about operating systems installed on this system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdMTFOperatingSystem | |||
| dMTFOperatingSystemEntry | 1.3.6.1.4.1.412.2.4.2.1 | ||
| This group defines general information about operating systems installed on this system. | |||
| OBJECT-TYPE | |||
| SdMTFOperatingSystem | |||
| dMTFOperatingSystemState | 1.3.6.1.4.1.412.2.4.2.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| operatingSystemIndexAtt1 | 1.3.6.1.4.1.412.2.4.2.1.1 | ||
| The index into the operating system table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| operatingSystemNameAtt2 | 1.3.6.1.4.1.412.2.4.2.1.2 | ||
| The name of this operating system. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| operatingSystemVersionAtt3 | 1.3.6.1.4.1.412.2.4.2.1.3 | ||
| The version number of this operating system. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| primaryOperatingSystemAtt4 | 1.3.6.1.4.1.412.2.4.2.1.4 | ||
| If true, this is the primary operating system. | |||
| OBJECT-TYPE | |||
| INTEGER | false(0), true(1) | ||
| operatingSystemBootDeviceStorageTypeAtt5 | 1.3.6.1.4.1.412.2.4.2.1.5 | ||
| An index into the Disks Table to indicate the device from which this operating system was booted. To fully access the Disks Table, this index must be combined with the attribute Boot Device Index. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), hardDisk(3), floppyDisk(4), opticalROM(5), opticalWORM(6), opticalRW(7), compactDisk(8), flashDisk(9), bernoulli(10), opticalFloppyDisk(11) | ||
| operatingSystemBootDeviceIndexAtt6 | 1.3.6.1.4.1.412.2.4.2.1.6 | ||
| An index into the Disks Table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| operatingSystemBootPartitionIndexAtt7 | 1.3.6.1.4.1.412.2.4.2.1.7 | ||
| An index into the Partition table indicating the partition from which this operating system booted. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| operatingSystemDescriptionAtt8 | 1.3.6.1.4.1.412.2.4.2.1.8 | ||
| A description of this operating system. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| dMTFSystemBIOSTable | 1.3.6.1.4.1.412.2.4.3 | ||
| This group defines the attributes for the System BIOS. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdMTFSystemBIOS | |||
| dMTFSystemBIOSEntry | 1.3.6.1.4.1.412.2.4.3.1 | ||
| This group defines the attributes for the System BIOS. | |||
| OBJECT-TYPE | |||
| SdMTFSystemBIOS | |||
| dMTFSystemBIOSState | 1.3.6.1.4.1.412.2.4.3.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| bIOSIndexAtt1 | 1.3.6.1.4.1.412.2.4.3.1.1 | ||
| The index into the system BIOS table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| bIOSManufacturerAtt2 | 1.3.6.1.4.1.412.2.4.3.1.2 | ||
| The name of the company that wrote this System BIOS. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| bIOSVersionAtt3 | 1.3.6.1.4.1.412.2.4.3.1.3 | ||
| The version number or version string of this BIOS. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| bIOSROMSizeAtt4 | 1.3.6.1.4.1.412.2.4.3.1.4 | ||
| The physical size of this BIOS ROM device in kilobytes. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| bIOSStartingAddressAtt5 | 1.3.6.1.4.1.412.2.4.3.1.5 | ||
| The starting physical address for the memory which the BIOS occupies. | |||
| OBJECT-TYPE | |||
| DmiInteger64 | |||
| bIOSEndingAddressAtt6 | 1.3.6.1.4.1.412.2.4.3.1.6 | ||
| The ending physical address for the memory which the BIOS occupies. | |||
| OBJECT-TYPE | |||
| DmiInteger64 | |||
| bIOSLoaderVersionAtt7 | 1.3.6.1.4.1.412.2.4.3.1.7 | ||
| The BIOS flash loader version number or string. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| bIOSReleaseDateAtt8 | 1.3.6.1.4.1.412.2.4.3.1.8 | ||
| The BIOS release date. | |||
| OBJECT-TYPE | |||
| DmiDate | |||
| primaryBIOSAtt9 | 1.3.6.1.4.1.412.2.4.3.1.9 | ||
| If true, this is the primary System BIOS. | |||
| OBJECT-TYPE | |||
| INTEGER | false(0), true(1) | ||
| dMTFProcessorTable | 1.3.6.1.4.1.412.2.4.5 | ||
| This group defines the attributes for each and every processor installed in this system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdMTFProcessor | |||
| dMTFProcessorEntry | 1.3.6.1.4.1.412.2.4.5.1 | ||
| This group defines the attributes for each and every processor installed in this system. | |||
| OBJECT-TYPE | |||
| SdMTFProcessor | |||
| dMTFProcessorState | 1.3.6.1.4.1.412.2.4.5.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| processorIndexAtt1 | 1.3.6.1.4.1.412.2.4.5.1.1 | ||
| An index into the processor table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| processorTypeAtt2 | 1.3.6.1.4.1.412.2.4.5.1.2 | ||
| The type of processor currently in the system. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), centralProcessor(3), mathProcessor(4), dSPProcessor(5), videoProcessor(6) | ||
| processorFamilyAtt3 | 1.3.6.1.4.1.412.2.4.5.1.3 | ||
| The family of processors to which this processor belongs. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), x8086(3), x80286(4), x80386(5), x80486(6), x8087(7), x80287(8), x80387(9), x80487(10), pentiumFamily(11), pentiumPro(12), pentiumII(13), pentiumMMX(14), celeron(15), xeon(16), m1Family(18), m2Family(19), k5Family(25), k6Family(26), powerPCFamily(32), powerPC601(33), powerPC603(34), powerPC603-1(35), powerPC604(36), alphaFamily(48), mIPSFamily(64), sPARCFamily(80), x68040(96), x68xxxFamily(97), x68000(98), x68010(99), x68020(100), x68030(101), hobbitFamily(112), weitek(128), pARISCFamily(144), v30Family(160) | ||
| processorVersionInformationAtt4 | 1.3.6.1.4.1.412.2.4.5.1.4 | ||
| The version number or string for this processor. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| maximumSpeedAtt5 | 1.3.6.1.4.1.412.2.4.5.1.5 | ||
| The maximum processor speed supported by this system in MHz. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| currentSpeedAtt6 | 1.3.6.1.4.1.412.2.4.5.1.6 | ||
| The current speed (in MHz) of this processor. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| processorUpgradeAtt7 | 1.3.6.1.4.1.412.2.4.5.1.7 | ||
| The method by which this processor can be upgraded, if upgrades are supported. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), daughterBoard(3), zIFSocket(4), replacementPiggyBack(5), none(6), lIFSocket(7), slot1(8), slot2(9) | ||
| fRUGroupIndexAtt8 | 1.3.6.1.4.1.412.2.4.5.1.8 | ||
| If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a FRU. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| operationalGroupIndexAtt9 | 1.3.6.1.4.1.412.2.4.5.1.9 | ||
| The index into the Operational State Table for this device if applicable. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| level1CacheIndexAtt10 | 1.3.6.1.4.1.412.2.4.5.1.10 | ||
| An index into the System Cache table that identifies the entry that describes the L1 cache for this processor. If more than one processor points to the same cache entry this means they share that cache. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| level2CacheIndexAtt11 | 1.3.6.1.4.1.412.2.4.5.1.11 | ||
| An index into the System Cache table that identifies the entry that describes the L2 cache for this processor If more than one processor points to the same cache entry this means they share that cache. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| level3CacheIndexAtt12 | 1.3.6.1.4.1.412.2.4.5.1.12 | ||
| An index into the System Cache table that identifies the entry that describes the L3 cache for this processor. If more than one processor points to the same cache entry this means they share that cache. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dMTFSystemCacheTable | 1.3.6.1.4.1.412.2.4.9 | ||
| This group defines the attributes for different System Caches installed in this system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdMTFSystemCache | |||
| dMTFSystemCacheEntry | 1.3.6.1.4.1.412.2.4.9.1 | ||
| This group defines the attributes for different System Caches installed in this system. | |||
| OBJECT-TYPE | |||
| SdMTFSystemCache | |||
| dMTFSystemCacheState | 1.3.6.1.4.1.412.2.4.9.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| systemCacheIndexAtt1 | 1.3.6.1.4.1.412.2.4.9.1.1 | ||
| An index into the System Cache table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| systemCacheLevelAtt2 | 1.3.6.1.4.1.412.2.4.9.1.2 | ||
| Is this the primary System Cache, or a subsidiary cache? | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), primary(3), secondary(4), tertiary(5) | ||
| systemCacheSpeedAtt3 | 1.3.6.1.4.1.412.2.4.9.1.3 | ||
| The speed of this System Cache module in nanoseconds. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| systemCacheSizeAtt4 | 1.3.6.1.4.1.412.2.4.9.1.4 | ||
| The size of this System Cache module in kilobytes. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| systemCacheWritePolicyAtt5 | 1.3.6.1.4.1.412.2.4.9.1.5 | ||
| Is this a write-back or a write-through cache? | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), writeBack(3), writeThrough(4), variesWithAddress(5) | ||
| systemCacheErrorCorrectionAtt6 | 1.3.6.1.4.1.412.2.4.9.1.6 | ||
| The error correction scheme supported by this cache component. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), none(3), parity(4), singleBitECC(5), multiBitECC(6) | ||
| fRUGroupIndexAtt7-1 | 1.3.6.1.4.1.412.2.4.9.1.7 | ||
| If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a FRU. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| operationalGroupIndexAtt8-2 | 1.3.6.1.4.1.412.2.4.9.1.8 | ||
| The index into the Operational State Table for this device. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| systemCacheTypeAtt9 | 1.3.6.1.4.1.412.2.4.9.1.9 | ||
| This defines the system cache type. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), instruction(3), data(4), unified(5) | ||
| lineSizeAtt10 | 1.3.6.1.4.1.412.2.4.9.1.10 | ||
| The size, in bytes, of a single cache bucket or line. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| volatilityAtt11 | 1.3.6.1.4.1.412.2.4.9.1.11 | ||
| This defines the volatility of the cache. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), temporaryVolatile(3), volatile(4), permanentNonVolatile(5), temporaryNonVolatile(6), uPSNonVolatile(7) | ||
| replacementPolicyAtt12 | 1.3.6.1.4.1.412.2.4.9.1.12 | ||
| The algorithm used by the cache to determine which cache lines or buckets should be re-used. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), leastRecentlyUsedLRU(3), firstInFirstOutFIFO(4), lastInFirstOutLIFO(5), leastFrequentlyUsedLFU(6), mostFrequentlyUsedMFU(7) | ||
| readPolicyAtt13 | 1.3.6.1.4.1.412.2.4.9.1.13 | ||
| The policy that shall be employed by the cache for handling read requests. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), read(3), readAhead(4), readAndReadAhead(5) | ||
| flushTimerAtt14 | 1.3.6.1.4.1.412.2.4.9.1.14 | ||
| The maximum amount of time, in seconds, dirty lines or buckets may remain in the cache before they are flushed. A value of zero indicated that a cache flush is not controlled by a flushing timer. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| associativityAtt15 | 1.3.6.1.4.1.412.2.4.9.1.15 | ||
| This defines the system cache associativity (direct-mapped, 2-way, 4-way, etc). | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), directMapped(3), x2WaySetAssociative(4), x4WaySetAssociative(5), fullyAssociative(6) | ||
| dMTFParallelPortsTable | 1.3.6.1.4.1.412.2.4.10 | ||
| This group defines the attributes for parallel ports in this system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdMTFParallelPorts | |||
| dMTFParallelPortsEntry | 1.3.6.1.4.1.412.2.4.10.1 | ||
| This group defines the attributes for parallel ports in this system. | |||
| OBJECT-TYPE | |||
| SdMTFParallelPorts | |||
| dMTFParallelPortsState | 1.3.6.1.4.1.412.2.4.10.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| parallelPortIndexAtt1 | 1.3.6.1.4.1.412.2.4.10.1.1 | ||
| An index into the parallel ports table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| parallelBaseIOAddressAtt2 | 1.3.6.1.4.1.412.2.4.10.1.2 | ||
| Base I/O address for this parallel port. | |||
| OBJECT-TYPE | |||
| DmiInteger64 | |||
| iRQUsedAtt3-1 | 1.3.6.1.4.1.412.2.4.10.1.3 | ||
| IRQ number that is being used by this parallel port. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| logicalNameAtt4-1 | 1.3.6.1.4.1.412.2.4.10.1.4 | ||
| The logical name of the I/O device on this parallel port, under this operating environment. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| connectorTypeAtt5-1 | 1.3.6.1.4.1.412.2.4.10.1.5 | ||
| The connector used to interface with the I/O device on this parallel port. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), dB25Female(3), dB25Male(4), centronics(5), miniCentronics(6), proprietary(7), centronics14(160), dB36Female(161), miniCentronics20(162) | ||
| connectorPinoutAtt6 | 1.3.6.1.4.1.412.2.4.10.1.6 | ||
| The pinout used by the I/O device on this parallel port. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), xTAT(3), pS2(4), iEEE1284(5), proprietary(6), pC98(160), pC98Hireso(161), pCH98(162), pC98Note(163), pC98Full(164) | ||
| dMASupportAtt7 | 1.3.6.1.4.1.412.2.4.10.1.7 | ||
| If true, DMA is supported. | |||
| OBJECT-TYPE | |||
| INTEGER | false(0), true(1) | ||
| parallelPortCapabilitiesAtt8 | 1.3.6.1.4.1.412.2.4.10.1.8 | ||
| Capabilities of this parallel port. This is a bit field mask with the bits defined as follows: Bit 0 (2^0) set = XT/AT compatible, Bit 1 (2^1) set = PS/2 compatible, Bit 2 (2^2) set = ECP, Bit 3 (2^3) set = EPP, Bit 4 (2^4) set = PC-98, Bit 5 (2^5) set = PC-98-Hireso, Bit 6 (2^6) set = PC-H98 | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| operationalGroupIndexAtt9-1 | 1.3.6.1.4.1.412.2.4.10.1.9 | ||
| The index into the Operational State Table for this device. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| parallelPortSecuritySettingsAtt10 | 1.3.6.1.4.1.412.2.4.10.1.10 | ||
| Attribute describing the current hardware security settings on this device | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), none(3), externalInterfaceLockedOut(4), externalInterfaceEnabled(5), bootBypass(6) | ||
| dMTFSerialPortsTable | 1.3.6.1.4.1.412.2.4.11 | ||
| This group defines the attributes for serial ports in this system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdMTFSerialPorts | |||
| dMTFSerialPortsEntry | 1.3.6.1.4.1.412.2.4.11.1 | ||
| This group defines the attributes for serial ports in this system. | |||
| OBJECT-TYPE | |||
| SdMTFSerialPorts | |||
| dMTFSerialPortsState | 1.3.6.1.4.1.412.2.4.11.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| serialPortIndexAtt1 | 1.3.6.1.4.1.412.2.4.11.1.1 | ||
| An index into the serial ports table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| serialBaseIOAddressAtt2 | 1.3.6.1.4.1.412.2.4.11.1.2 | ||
| Base I/O address for this serial port. | |||
| OBJECT-TYPE | |||
| DmiInteger64 | |||
| iRQUsedAtt3 | 1.3.6.1.4.1.412.2.4.11.1.3 | ||
| IRQ number that is being used by this serial port. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| logicalNameAtt4 | 1.3.6.1.4.1.412.2.4.11.1.4 | ||
| The logical name of this serial port under this operating environment. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| connectorTypeAtt5 | 1.3.6.1.4.1.412.2.4.11.1.5 | ||
| The connector used to interface with the I/O device on this serial port. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), dB9PinMale(3), dB9PinFemale(4), dB25PinMale(5), dB25PinFemale(6), rJ11(7), rJ45(8), proprietary(9), circularDIN8Male(10), circularDIN8Female(11), miniCentronicsType14(160), miniCentronicsType26(161) | ||
| maximumSpeedAtt6 | 1.3.6.1.4.1.412.2.4.11.1.6 | ||
| Maximum transfer speed of the device on this serial port in bits per second. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| serialPortCapabilitiesAtt7 | 1.3.6.1.4.1.412.2.4.11.1.7 | ||
| The capabilities of this Serial port. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), xTATCompatible(3), x16450Compatible(4), x16550Compatible(5), x16550ACompatible(6), x8251Compatible(160), x8251FIFOCompatible(161) | ||
| operationalGroupIndexAtt8-1 | 1.3.6.1.4.1.412.2.4.11.1.8 | ||
| The index into the Operational State Table for this device. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| serialPortSecuritySettingsAtt9 | 1.3.6.1.4.1.412.2.4.11.1.9 | ||
| Attribute describing the current hardware security settings on this device | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), none(3), externalInterfaceLockedOut(4), externalInterfaceEnabled(5), bootBypass(6) | ||
| dMTFPowerSupplyTable | 1.3.6.1.4.1.412.2.4.16 | ||
| This group defines various attributes for power supplies in this system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdMTFPowerSupply | |||
| dMTFPowerSupplyEntry | 1.3.6.1.4.1.412.2.4.16.1 | ||
| This group defines various attributes for power supplies in this system. | |||
| OBJECT-TYPE | |||
| SdMTFPowerSupply | |||
| dMTFPowerSupplyEvt1 | 1.3.6.1.4.1.412.2.4.16.1 | ||
| powerSupplyStatusChange | |||
| TRAP-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dMTFPowerSupplyEvSys | |||
| dMTFPowerSupplyEvSub | |||
| dMTFPowerSupplyState | 1.3.6.1.4.1.412.2.4.16.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| powerSupplyIndexAtt1 | 1.3.6.1.4.1.412.2.4.16.1.1 | ||
| The index number of the current power supply. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| fRUGroupIndexAtt2-1 | 1.3.6.1.4.1.412.2.4.16.1.2 | ||
| If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a FRU. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| operationalGroupIndexAtt3-1 | 1.3.6.1.4.1.412.2.4.16.1.3 | ||
| The index into the Operational State table for this device. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| powerUnitIndexAtt4 | 1.3.6.1.4.1.412.2.4.16.1.4 | ||
| This is the ID of the Power Unit (logical power supply) to which this Power Supply belongs. This value matches up with the Power Unit Table Index attribute defined in the Power Unit Global Table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| powerSupplyTypeAtt5 | 1.3.6.1.4.1.412.2.4.16.1.5 | ||
| This attribute describes the type of Power Supply, e.g. Linear, Switching, Battery, etc. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), linear(3), switching(4), battery(5), uPS(6), converter(7), regulator(8) | ||
| inputVoltageCapabilityDescriptionAtt6 | 1.3.6.1.4.1.412.2.4.16.1.6 | ||
| An expanded description of the Input Voltage Capability for this Power Supply. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| range1InputVoltageLowAtt7 | 1.3.6.1.4.1.412.2.4.16.1.7 | ||
| The low voltage of Input Voltage Range 1 for this Power Supply, in millivolts. A value of 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| range1InputVoltageHighAtt8 | 1.3.6.1.4.1.412.2.4.16.1.8 | ||
| The high voltage of Input Voltage Range 1 for this Power Supply, in millivolts. A value of 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| range1VoltageProbeIndexAtt9 | 1.3.6.1.4.1.412.2.4.16.1.9 | ||
| Index into the Voltage Probe table identifying the voltage probe monitoring this input range. 0 indicates no probe provided. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| range1ElectricalCurrentProbeIndexAtt10 | 1.3.6.1.4.1.412.2.4.16.1.10 | ||
| Index into the Elelctrical Current Probe table identifying the Electrical current probe monitoring this input range. 0 indicates no probe provided. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| range2InputVoltageLowAtt11 | 1.3.6.1.4.1.412.2.4.16.1.11 | ||
| The low voltage of Input Voltage Range 2 for this Power Supply, in millivolts. A value of 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| range2InputVoltageHighAtt12 | 1.3.6.1.4.1.412.2.4.16.1.12 | ||
| The high voltage of Input Voltage Range 2 for this Power Supply, in millivolts. A value of 0x80000000 denotes 'unknown' | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| range2VoltageProbeIndexAtt13 | 1.3.6.1.4.1.412.2.4.16.1.13 | ||
| Index into the Voltage Probe table identifying the voltage probe monitoring this input range. 0 indicates no probe provided. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| range2CurrentProbeIndexAtt14 | 1.3.6.1.4.1.412.2.4.16.1.14 | ||
| Index into the Current Probe table identifying the current probe monitoring this input range. 0 indicates no probe provided. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| activeInputVoltageRangeAtt15 | 1.3.6.1.4.1.412.2.4.16.1.15 | ||
| The value of this attribute indicates which input voltage range of this Power Supply is currently active. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), range1(3), range2(4), both(5) | ||
| inputVoltageRangeSwitchingAtt16 | 1.3.6.1.4.1.412.2.4.16.1.16 | ||
| This attribute describes the kind of input voltage range switching that is implemented in this power supply. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), manual(3), autoswitch(4), wideRange(5), notApplicable(6) | ||
| range1InputFrequencyLowAtt17 | 1.3.6.1.4.1.412.2.4.16.1.17 | ||
| The frequency at the low end of this power supply's Input Frequency Range 1. A value of zero implies DC. A value of 0x80000000 denotes 'unknown' | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| range1InputFrequencyHighAtt18 | 1.3.6.1.4.1.412.2.4.16.1.18 | ||
| The frequency at the high end of this power supply's Input Frequency Range 1. A value of zero implies DC. A value of 0x80000000 denotes 'unknown' | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| range2InputFrequencyLowAtt19 | 1.3.6.1.4.1.412.2.4.16.1.19 | ||
| The frequency at the low end of this power supply's Input Frequency Range 2. A value of zero implies DC. A value of 0x80000000 denotes 'unknown' | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| range2InputFrequencyHighAtt20 | 1.3.6.1.4.1.412.2.4.16.1.20 | ||
| The frequency at the high end of this power supply's Input Frequency Range 2. A value of zero implies DC. A value of 0x80000000 denotes 'unknown' | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| totalOutputPowerAtt21 | 1.3.6.1.4.1.412.2.4.16.1.21 | ||
| This attribute value represents the total output power of this power supply in milliWatts. 0x80000000 denotes 'unknown' | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dMTFPowerSupplyEvt2 | 1.3.6.1.4.1.412.2.4.16.2 | ||
| powerControlRequest | |||
| TRAP-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dMTFPowerSupplyEvSys | |||
| dMTFPowerSupplyEvSub | |||
| dMTFPowerSupplyEvSys | 1.3.6.1.4.1.412.2.4.16.6 | ||
| The major functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dMTFPowerSupplyEvSub | 1.3.6.1.4.1.412.2.4.16.7 | ||
| The minor functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dMTFCoolingDeviceTable | 1.3.6.1.4.1.412.2.4.17 | ||
| This group defines various attributes for cooling devices in this system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdMTFCoolingDevice | |||
| dMTFCoolingDeviceEntry | 1.3.6.1.4.1.412.2.4.17.1 | ||
| This group defines various attributes for cooling devices in this system. | |||
| OBJECT-TYPE | |||
| SdMTFCoolingDevice | |||
| dMTFCoolingDeviceEvt1 | 1.3.6.1.4.1.412.2.4.17.1 | ||
| coolingDeviceStatusChange | |||
| TRAP-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dMTFCoolingDeviceEvSys | |||
| dMTFCoolingDeviceEvSub | |||
| dMTFCoolingDeviceState | 1.3.6.1.4.1.412.2.4.17.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| coolingDeviceTableIndexAtt1 | 1.3.6.1.4.1.412.2.4.17.1.1 | ||
| An index into the cooling device table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| fRUGroupIndexAtt2 | 1.3.6.1.4.1.412.2.4.17.1.2 | ||
| If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a FRU. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| operationalGroupIndexAtt3 | 1.3.6.1.4.1.412.2.4.17.1.3 | ||
| The index into the Operational State table for this device. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| coolingUnitIndexAtt4 | 1.3.6.1.4.1.412.2.4.17.1.4 | ||
| This is the ID of the Cooling Unit (logical cooling device) of which this Cooling Device is a part. This value matches up with the Cooling Unit Table Index attribute defined in the Cooling Unit Global Table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| coolingDeviceTypeAtt5 | 1.3.6.1.4.1.412.2.4.17.1.5 | ||
| The type of Cooling Device that this is e.g. Fan, Heat Pipe, etc. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), fan(3), centrifugalBlower(4), chipFan(5), cabinetFan(6), powerSupplyFan(7), heatPipe(8), integratedRefrigeration(9), activeCooling(32), passiveCooling(33) | ||
| temperatureProbeIndexAtt6 | 1.3.6.1.4.1.412.2.4.17.1.6 | ||
| Index into the Temperature Probe table identifying the temperatu e probe monitoring this cooling device. 0 indicates no probe provided. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dMTFCoolingDeviceEvt2 | 1.3.6.1.4.1.412.2.4.17.2 | ||
| temperatureFault | |||
| TRAP-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dMTFCoolingDeviceEvSys | |||
| dMTFCoolingDeviceEvSub | |||
| dMTFCoolingDeviceEvSys | 1.3.6.1.4.1.412.2.4.17.6 | ||
| The major functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dMTFCoolingDeviceEvSub | 1.3.6.1.4.1.412.2.4.17.7 | ||
| The minor functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dMTFSystemSlotsTable | 1.3.6.1.4.1.412.2.4.18 | ||
| This group defines the attributes for the different system expansion slots supported in this system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdMTFSystemSlots | |||
| dMTFSystemSlotsEntry | 1.3.6.1.4.1.412.2.4.18.1 | ||
| This group defines the attributes for the different system expansion slots supported in this system. | |||
| OBJECT-TYPE | |||
| SdMTFSystemSlots | |||
| dMTFSystemSlotsState | 1.3.6.1.4.1.412.2.4.18.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| slotIndexAtt1 | 1.3.6.1.4.1.412.2.4.18.1.1 | ||
| An index into the system slot table. This is the hardware ID number for each expansion slot, whether it is occupied or not (starting with 1). | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| slotTypeAtt2 | 1.3.6.1.4.1.412.2.4.18.1.2 | ||
| The bus type supported in this slot. This is a bit field with the following definitions: Bit 0 (2^0), if 1, it is a long-length card; if 0, it is a short-length card, Bit 1 (2^1) if set, indicates ISA, Bit 2 (2^2) indicates EISA, Bit 3 (2^3) indicates MCA, Bit 4 (2^4) indicates PCI, Bit 5 (2^5) indicates VL, Bit 6 (2^6) indicates PCMCIA, Bit 7 (2^7) refers to NuBus, Bit 8 (2^8) indicates PC-98/C20, Bit 9 (2^9) indicates PC-98/C24, Bit 10 (2^10) indicates PC-98/E, Bit 11 (2^ | |||
| OBJECT-TYPE | |||
| DmiInteger64 | |||
| slotWidthAtt3 | 1.3.6.1.4.1.412.2.4.18.1.3 | ||
| The maximum bus width of cards accepted in this slot. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), x8BitCard(3), x16BitCard(4), x32BitCard(5), x64BitCard(6), x128BitCard(7) | ||
| currentUsageAtt4 | 1.3.6.1.4.1.412.2.4.18.1.4 | ||
| Is this slot is currently in use? | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), available(3), inUse(4) | ||
| slotDescriptionAtt5 | 1.3.6.1.4.1.412.2.4.18.1.5 | ||
| The card currently occupying this slot. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| slotCategoryAtt6 | 1.3.6.1.4.1.412.2.4.18.1.6 | ||
| The word 'slot' is used to refer to bus slots. The last case (motherboard) refers to situations where a functional element is integrated onto, say, a motherboard and connects to a bus without a connector. It still takes up an expansion site on the bus but this is termed a 'virtual slot' as opposed to a physical slot (see the attribute 'Virtual Slot'). Virtual slots are in effect permanently occupied expansion sites. This attribute establishes which category of physical slot this table entry is defining. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), busConnector(3), pCMCIASlot(4), motherboard(5) | ||
| virtualSlotAtt7 | 1.3.6.1.4.1.412.2.4.18.1.7 | ||
| This attribute indicates whether this is a 'virtual slot' or not. A 'virtual slot' is an expansion site that is permanently occupied because of the level of integration of an expandable component. An example of a virtual slot is an I/O bus position taken up by a LAN controller that is integrated onto a motherboard. A slot with the 'Slot Category' of Motherboard is typically a Virtual Slot. | |||
| OBJECT-TYPE | |||
| INTEGER | false(0), true(1), unknown(2) | ||
| resourceUserIDAtt8 | 1.3.6.1.4.1.412.2.4.18.1.8 | ||
| Value used to locate the rows in the System Resources 2 table for the resources associated with this slot or expansion site. 0 = 'unspecified . | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dMTFFRUTable | 1.3.6.1.4.1.412.2.4.29 | ||
| A Field Replaceable Unit (FRU), is defined as a hardware component which is designed to be separately removable for replacement or repair. For the purposes of this definition, a motherboard and a fixed hard disk are FRUs, whereas a fixed hard disk platter or a chip fixed in place on the motherboard are not FRUs since they are not designed to be separately removable. Each instance within the FRU table should contain the device group and instance data for the associated hardware component. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdMTFFRU | |||
| dMTFFRUEntry | 1.3.6.1.4.1.412.2.4.29.1 | ||
| A Field Replaceable Unit (FRU), is defined as a hardware component which is designed to be separately removable for replacement or repair. For the purposes of this definition, a motherboard and a fixed hard disk are FRUs, whereas a fixed hard disk platter or a chip fixed in place on the motherboard are not FRUs since they are not designed to be separately removable. Each instance within the FRU table should contain the device group and instance data for the associated hardware component. | |||
| OBJECT-TYPE | |||
| SdMTFFRU | |||
| dMTFFRUState | 1.3.6.1.4.1.412.2.4.29.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| fRUIndexAtt1 | 1.3.6.1.4.1.412.2.4.29.1.1 | ||
| The index into the Field Replaceable Unit table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| deviceGroupIndexAtt2 | 1.3.6.1.4.1.412.2.4.29.1.2 | ||
| The group ID of the group referencing this Field Replaceable Unit instance. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| descriptionAtt3 | 1.3.6.1.4.1.412.2.4.29.1.3 | ||
| A clear description of this Field Replaceable Unit. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| manufacturerAtt4 | 1.3.6.1.4.1.412.2.4.29.1.4 | ||
| The name of the company manufacturing or providing this Field Replaceable Unit. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| modelAtt5 | 1.3.6.1.4.1.412.2.4.29.1.5 | ||
| The manufacturer's model number for this Field Replaceable Unit. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| partNumberAtt6 | 1.3.6.1.4.1.412.2.4.29.1.6 | ||
| A part number by which a replacement part can be ordered for this Field Replaceable Unit. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| fRUSerialNumberAtt7 | 1.3.6.1.4.1.412.2.4.29.1.7 | ||
| The manufacturer's serial number for this Field Replaceable Unit. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| revisionLevelAtt8 | 1.3.6.1.4.1.412.2.4.29.1.8 | ||
| The revision level of this Field Replaceable Unit. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| warrantyStartDateAtt9 | 1.3.6.1.4.1.412.2.4.29.1.9 | ||
| The start date of the service warranty for this Field Replaceabl Unit. | |||
| OBJECT-TYPE | |||
| DmiDate | |||
| warrantyDurationAtt10 | 1.3.6.1.4.1.412.2.4.29.1.10 | ||
| The total duration of this Field Replaceable Unit warranty in months. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| supportPhoneNumberAtt11 | 1.3.6.1.4.1.412.2.4.29.1.11 | ||
| The phone number(s) for support for this Field Replaceable Unit. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| fRUInternetUniformResourceLocatorAtt12 | 1.3.6.1.4.1.412.2.4.29.1.12 | ||
| The Internet Uniform Resource Locator string that can be used through a World Wide Web browser to obtain further information about this FRU | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| dMTFOperationalStateTable | 1.3.6.1.4.1.412.2.4.30 | ||
| This group provides the operational state, usage, and availabili y status,and administrative state indicators for specific Device Group instances | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdMTFOperationalState | |||
| dMTFOperationalStateEntry | 1.3.6.1.4.1.412.2.4.30.1 | ||
| This group provides the operational state, usage, and availabili y status,and administrative state indicators for specific Device Group instances | |||
| OBJECT-TYPE | |||
| SdMTFOperationalState | |||
| dMTFOperationalStateState | 1.3.6.1.4.1.412.2.4.30.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| operationalStateInstanceIndexAtt1 | 1.3.6.1.4.1.412.2.4.30.1.1 | ||
| The Index into the Operational State table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| deviceGroupIndexAtt2-1 | 1.3.6.1.4.1.412.2.4.30.1.2 | ||
| The group ID of the group referencing this instance. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| operationalStatusAtt3 | 1.3.6.1.4.1.412.2.4.30.1.3 | ||
| The operational status of the Device Group instance. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), enabled(3), disabled(4), notApplicable(5) | ||
| usageStateAtt4 | 1.3.6.1.4.1.412.2.4.30.1.4 | ||
| The usage state of the Device Group instance. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), idle(3), active(4), busy(5), notApplicable(6) | ||
| availabilityStatusAtt5 | 1.3.6.1.4.1.412.2.4.30.1.5 | ||
| The availability status of the Device Group instance. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), running(3), warning(4), inTest(5), notApplicable(6), powerOff(7), offLine(8), offDuty(9), degraded(10), notInstalled(11), installError(12), powerSave(13) | ||
| administrativeStateAtt6 | 1.3.6.1.4.1.412.2.4.30.1.6 | ||
| The administrative state of the Device Group instance. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), locked(3), unlocked(4), notApplicable(5), shuttingDown(6) | ||
| fatalErrorCountAtt7 | 1.3.6.1.4.1.412.2.4.30.1.7 | ||
| The accumulated Fatal or Non-recoverable error count for this Device Group instance. | |||
| OBJECT-TYPE | |||
| DmiCounter | |||
| majorErrorCountAtt8 | 1.3.6.1.4.1.412.2.4.30.1.8 | ||
| The accumulated Major or Critical error count for this Device Group instance. | |||
| OBJECT-TYPE | |||
| DmiCounter | |||
| warningErrorCountAtt9 | 1.3.6.1.4.1.412.2.4.30.1.9 | ||
| The accumulated Warning or Non-Critical error count for this Device Group instance. | |||
| OBJECT-TYPE | |||
| DmiCounter | |||
| currentErrorStatusAtt10 | 1.3.6.1.4.1.412.2.4.30.1.10 | ||
| This attribute presents the current error status for this Device Group instance. The most critical error status in effect should be presented. I.e. if a part of the Device Group instance is 'Critical', while other status is 'Non-critical' then the status'Critical' should be reported. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), oK(3), nonCritical(4), critical(5), nonRecoverable(6) | ||
| devicePredictedFailureStatusAtt11 | 1.3.6.1.4.1.412.2.4.30.1.11 | ||
| Enumeration describing the current Device Predicted Failure Status (e.g.: the S.M.A.R.T. status of the device). | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), notSupportedByThisDevice(3), noFailurePredictedByTheDevice(4), deviceFailurePredictedByTheDevice(5), mediaFailurePredictedByTheDevice(6) | ||
| dMTFPhysicalMemoryArrayTable | 1.3.6.1.4.1.412.2.4.33 | ||
| This group represents an array of physical memory as a collectio of one or more Memory Devices associated in sets and partitions. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdMTFPhysicalMemoryArray | |||
| dMTFPhysicalMemoryArrayEntry | 1.3.6.1.4.1.412.2.4.33.1 | ||
| This group represents an array of physical memory as a collectio of one or more Memory Devices associated in sets and partitions. | |||
| OBJECT-TYPE | |||
| SdMTFPhysicalMemoryArray | |||
| dMTFPhysicalMemoryArrayEvt1 | 1.3.6.1.4.1.412.2.4.33.1 | ||
| memoryError | |||
| TRAP-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dMTFPhysicalMemoryArrayEvSys | |||
| dMTFPhysicalMemoryArrayEvSub | |||
| dMTFPhysicalMemoryArrayState | 1.3.6.1.4.1.412.2.4.33.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| memoryArrayTableIndexAtt1 | 1.3.6.1.4.1.412.2.4.33.1.1 | ||
| A unique number that identifies this row. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| memoryArrayLocationAtt2 | 1.3.6.1.4.1.412.2.4.33.1.2 | ||
| The physical location of the Memory Array, whether on the system board or an add-on board. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), systemBoardOrMotherboard(3), iSAAddOnCard(4), eISAAddOnCard(5), pCIAddOnCard(6), mCAAddOnCard(7), pCMCIAAddOnCard(8), proprietaryAddOnCard(9), nuBus(16), pC98C20AddOnCard(160), pC98C24AddOnCard(161), pC98EAddOnCard(162), pC98LocalBusAddOnCard(163), pC98CardSlotAddOnCard(164) | ||
| memoryArrayUseAtt3 | 1.3.6.1.4.1.412.2.4.33.1.3 | ||
| What this Memory Array is used for. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), systemMemory(3), videoMemory(4), flashMemory(5), nonVolatileRAM(6), cacheMemory(7) | ||
| maximumMemoryCapacityAtt4 | 1.3.6.1.4.1.412.2.4.33.1.4 | ||
| The maximum memory capacity, in kilobytes, on this array. 0x80000000denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| numberOfMemoryDeviceSocketsAtt5 | 1.3.6.1.4.1.412.2.4.33.1.5 | ||
| The number of SIMM slots or sockets available for Memory Devices in this array. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| numberOfMemoryDeviceSocketsUsedAtt6 | 1.3.6.1.4.1.412.2.4.33.1.6 | ||
| The number of SIMM slots or sockets in use for Memory Devices in this array. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| memoryErrorCorrectionAtt7 | 1.3.6.1.4.1.412.2.4.33.1.7 | ||
| The main hardware error correction or detection method supported by this Memory Array. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), none(3), parity(4), singleBitECC(5), multiBitECC(6), cRC(7) | ||
| arrayErrorTypeAtt8 | 1.3.6.1.4.1.412.2.4.33.1.8 | ||
| The type of error that is associated with the current status reported in Operational State for this Memory Array. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), oK(3), badRead(4), parityError(5), singleBitError(6), doubleBitError(7), multiBitError(8), nibbleError(9), checksumError(10), cRCError(11), correctedSingleBitError(12), correctedError(13), uncorrectableError(14) | ||
| lastErrorUpdateAtt9 | 1.3.6.1.4.1.412.2.4.33.1.9 | ||
| System state during which last error status was collected. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), noUpdateSinceLastInstrumentationStart(3), updatedFromInformationObtainedPriorToInstrumentati(4), updatedDuringInstrumentationRunTime(5) | ||
| errorOperationAtt10 | 1.3.6.1.4.1.412.2.4.33.1.10 | ||
| The memory access operation that caused the current error. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), read(3), write(4), partialWrite(5) | ||
| errorDataSizeAtt11 | 1.3.6.1.4.1.412.2.4.33.1.11 | ||
| The size of the data transfer that caused the error, in bits. Zero indicates no error, 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| errorDataAtt12 | 1.3.6.1.4.1.412.2.4.33.1.12 | ||
| Data captured during the erroneous Memory Array access. The data occupy the first n bytes of the octet string required to hold 'Error Data Size' bits of the data. Data are stored least-significant byte first. | |||
| OBJECT-TYPE | |||
| DmiOctetstring | |||
| vendorSyndromeAtt13 | 1.3.6.1.4.1.412.2.4.33.1.13 | ||
| Vendor-specific syndrome or CRC data associated with the erroneous access. | |||
| OBJECT-TYPE | |||
| DmiOctetstring | |||
| errorAddressAtt14 | 1.3.6.1.4.1.412.2.4.33.1.14 | ||
| Physical address of the error based on the addressing of the bus that the Memory Array is connected to. 0x8000 0000 0000 0000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger64 | |||
| errorResolutionAtt15 | 1.3.6.1.4.1.412.2.4.33.1.15 | ||
| Range in bytes that the error can be determined to be within, when an Error Address is given. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| fRUGroupIndexAtt16 | 1.3.6.1.4.1.412.2.4.33.1.16 | ||
| If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a FRU. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| operationalGroupIndexAtt17 | 1.3.6.1.4.1.412.2.4.33.1.17 | ||
| The index into the Operational State Table for this Memory Array. The Operational State row is used to hold the overall error count and error status for this array. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dMTFPhysicalMemoryArrayEvt2 | 1.3.6.1.4.1.412.2.4.33.2 | ||
| initializationFailure | |||
| TRAP-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dMTFPhysicalMemoryArrayEvSys | |||
| dMTFPhysicalMemoryArrayEvSub | |||
| dMTFPhysicalMemoryArrayEvSys | 1.3.6.1.4.1.412.2.4.33.6 | ||
| The major functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dMTFPhysicalMemoryArrayEvSub | 1.3.6.1.4.1.412.2.4.33.7 | ||
| The minor functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dMTFMemoryArrayMappedAddressesTable | 1.3.6.1.4.1.412.2.4.34 | ||
| This table presents ranges of physical addresses that are mapped to a given Memory Array. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdMTFMemoryArrayMappedAddresses | |||
| dMTFMemoryArrayMappedAddressesEntry | 1.3.6.1.4.1.412.2.4.34.1 | ||
| This table presents ranges of physical addresses that are mapped to a given Memory Array. | |||
| OBJECT-TYPE | |||
| SdMTFMemoryArrayMappedAddresses | |||
| dMTFMemoryArrayMappedAddressesState | 1.3.6.1.4.1.412.2.4.34.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| memoryArrayMappedAddressesTableIndexAtt1 | 1.3.6.1.4.1.412.2.4.34.1.1 | ||
| A unique number that identifies this row. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| memoryArrayIndexAtt2 | 1.3.6.1.4.1.412.2.4.34.1.2 | ||
| The ID of the Memory Array that this address range is mapped to. Multiple address ranges may be mapped to a Memory Array. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| mappedRangeStartingAddressAtt3 | 1.3.6.1.4.1.412.2.4.34.1.3 | ||
| The physical starting address, in kilobytes, of a range of memory mapped to the specified Memory Array. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| mappedRangeEndingAddressAtt4 | 1.3.6.1.4.1.412.2.4.34.1.4 | ||
| The physical ending address of the last kilobyte of a range of addresses mapped to the specified Memory Array. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| partitionIDAtt5 | 1.3.6.1.4.1.412.2.4.34.1.5 | ||
| Identifies a Memory Partition associated with the Memory Array specified by Memory Array Table Index. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| partitionWidthAtt6 | 1.3.6.1.4.1.412.2.4.34.1.6 | ||
| The number of Memory Devices that form a single row of memory for the partition. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| operationalGroupIndexAtt7 | 1.3.6.1.4.1.412.2.4.34.1.7 | ||
| The index into the Operational State Table for this Memory Range. Generally, there will be a 1:1 correspondence between a mapped range and a partition. In which case, the Operational State will be for the partition as well. In the case that there is more than one mapped range for a partion, it will be necessary to check the Operational State entries for each range to determine the overall status of the partition. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dMTFMemoryDeviceTable | 1.3.6.1.4.1.412.2.4.35 | ||
| This group presents information about individual memory devices in the system. A memory device can be a SIMM, a SIPP, or a single chip, or an entire card-based on the resolution to which a memory error can be determined and whether the device is replaceable as a unit. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdMTFMemoryDevice | |||
| dMTFMemoryDeviceEntry | 1.3.6.1.4.1.412.2.4.35.1 | ||
| This group presents information about individual memory devices in the system. A memory device can be a SIMM, a SIPP, or a single chip, or an entire card-based on the resolution to which a memory error can be determined and whether the device is replaceable as a unit. | |||
| OBJECT-TYPE | |||
| SdMTFMemoryDevice | |||
| dMTFMemoryDeviceState | 1.3.6.1.4.1.412.2.4.35.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| memoryDeviceTableIndexAtt1 | 1.3.6.1.4.1.412.2.4.35.1.1 | ||
| A unique number that identifies this row. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| memoryArrayIndexAtt2-1 | 1.3.6.1.4.1.412.2.4.35.1.2 | ||
| The ID of the Memory Array that this Memory Device is a part of. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| deviceLocatorAtt3 | 1.3.6.1.4.1.412.2.4.35.1.3 | ||
| A string identifying the physically labeled socket or board position where the memory device is located. Eg. 'SIMM 3' or 'IC12'. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| bankLocatorAtt4 | 1.3.6.1.4.1.412.2.4.35.1.4 | ||
| A string identifying the physically labeled bank where the memory device is located. Eg. 'Bank 0' or 'A'. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| sizeAtt5 | 1.3.6.1.4.1.412.2.4.35.1.5 | ||
| Size of this memory device, in bytes. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| formFactorAtt6 | 1.3.6.1.4.1.412.2.4.35.1.6 | ||
| Implementation form factor for this memory device. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), sIMM(3), sIP(4), chip(5), dIP(6), zIP(7), proprietaryCard(8), dIMM(9), tSOP(10), rowOfChips(11) | ||
| totalWidthAtt7 | 1.3.6.1.4.1.412.2.4.35.1.7 | ||
| Total width of this memory device, including check or error correction bits, in bits. If there are no error correction bits, the value in this attribute should match that specified in Data Width. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dataWidthAtt8 | 1.3.6.1.4.1.412.2.4.35.1.8 | ||
| Data width of this memory device, in bits. A data width of 0 and a Total Width of 8 would indicate that the device is solely being used to provide eight error correction bits. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| memoryTypeAtt9 | 1.3.6.1.4.1.412.2.4.35.1.9 | ||
| Type of memory used in this memory device. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), dRAM(3), eDRAM(4), vRAM(5), sRAM(6), rAM(7), rOM(8), fLASH(9), eEPROM(10), fEPROM(11), ePROM(12) | ||
| typeDetailAtt10 | 1.3.6.1.4.1.412.2.4.35.1.10 | ||
| Additional detail on the device type. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), fastPaged(3), staticColumn(4), pseudoStatic(5), rAMBUS(6), synchronous(7), cMOS(8), eDO(9), windowDRAM(10), cacheDRAM(11), nonVolatile(12) | ||
| deviceSetAtt11 | 1.3.6.1.4.1.412.2.4.35.1.11 | ||
| This attribute is used to identify when the Memory Device is one of a set of Memory Devices that must be populated with all devices of the same type and size, and which set the device belongs to. For example, when one SIMM belongs to a set of four. 0 indicates the Memory Device isn't part of a set. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| deviceErrorTypeAtt12 | 1.3.6.1.4.1.412.2.4.35.1.12 | ||
| The type of error that is associated with the current status reported in Operational State for this Memory Device. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), oK(3), badRead(4), parityError(5), singleBitError(6), doubleBitError(7), multiBitError(8), nibbleError(9), checksumError(10), cRCError(11), correctedSingleBitError(12), correctedError(13), uncorrectableError(14) | ||
| errorGranularityAtt13 | 1.3.6.1.4.1.412.2.4.35.1.13 | ||
| Specifies whether the current error's location can be resolved to the partition or device level. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), deviceLevel(3), memoryPartitionLevel(4) | ||
| lastErrorUpdateAtt14 | 1.3.6.1.4.1.412.2.4.35.1.14 | ||
| System state during which the last error update was collected. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), noUpdateSinceLastInstrumentationStart(3), updatedFromInformationObtainedPriorToInstrumentati(4), updatedDuringInstrumentationRunTime(5) | ||
| errorOperationAtt15 | 1.3.6.1.4.1.412.2.4.35.1.15 | ||
| The memory access operation that caused the current error. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), read(3), write(4), partialWrite(5) | ||
| errorDataSizeAtt16 | 1.3.6.1.4.1.412.2.4.35.1.16 | ||
| The size of the data transfer that caused the error,in bits. Zero indicates no error, 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| errorDataAtt17 | 1.3.6.1.4.1.412.2.4.35.1.17 | ||
| Data captured during the erroneous Memory Array access. The data occupies the first n bytes of the octet string required to hold 'Error Data Size' bits of the data. Data is stored least-significant byte first. | |||
| OBJECT-TYPE | |||
| DmiOctetstring | |||
| vendorSyndromeAtt18 | 1.3.6.1.4.1.412.2.4.35.1.18 | ||
| Vendor-specific syndrome or CRC data associated with the erroneous access. | |||
| OBJECT-TYPE | |||
| DmiOctetstring | |||
| deviceErrorAddressAtt19 | 1.3.6.1.4.1.412.2.4.35.1.19 | ||
| Physical address of the error relative to the start of the device, in bytes. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| arrayErrorAddressAtt20 | 1.3.6.1.4.1.412.2.4.35.1.20 | ||
| Physical address of the kilobyte where the error is located, relative to the bus for the Memory Array. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| errorResolutionAtt21 | 1.3.6.1.4.1.412.2.4.35.1.21 | ||
| Range in bytes that the error can be determined to be within,whe an Error Address is given. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| fRUGroupIndexAtt22 | 1.3.6.1.4.1.412.2.4.35.1.22 | ||
| If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a FRU. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| operationalGroupIndexAtt23 | 1.3.6.1.4.1.412.2.4.35.1.23 | ||
| The index into the Operational State Table for this device. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dMTFMemoryDeviceMappedAddressesTable | 1.3.6.1.4.1.412.2.4.36 | ||
| This table presents ranges of physical addresses that are mapped to a given Memory Device Set. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdMTFMemoryDeviceMappedAddresses | |||
| dMTFMemoryDeviceMappedAddressesEntry | 1.3.6.1.4.1.412.2.4.36.1 | ||
| This table presents ranges of physical addresses that are mapped to a given Memory Device Set. | |||
| OBJECT-TYPE | |||
| SdMTFMemoryDeviceMappedAddresses | |||
| dMTFMemoryDeviceMappedAddressesState | 1.3.6.1.4.1.412.2.4.36.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| memoryDeviceMappedAddressesTableIndexAtt1 | 1.3.6.1.4.1.412.2.4.36.1.1 | ||
| A unique number that identifies this row. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| memoryDeviceSetIDAtt2 | 1.3.6.1.4.1.412.2.4.36.1.2 | ||
| The row in the Memory Device table that this address range is for. This matches with a Memory Device Table Index. There may be multiple rows in Memory Device Mapped addresses for a single Memory Device. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| partitionAtt3 | 1.3.6.1.4.1.412.2.4.36.1.3 | ||
| Identifies the Memory partition in the Memory Array Mapped Addresses table that this Memory Device is part of. Partition number should be positive. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| mappedRangeStartingAddressAtt4 | 1.3.6.1.4.1.412.2.4.36.1.4 | ||
| The physical starting address, in kilobytes, of a range of memory mapped to the specified Memory Device set. The address is specified relative to the bus that the device is connected to. 0x80000000 denotes 'unknown . | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| mappedRangeEndingAddressAtt5 | 1.3.6.1.4.1.412.2.4.36.1.5 | ||
| The physical ending address of the last kilobyte of a range of addresses mapped to the specified Memory Device. The address is specified relative to the bus that the device is connected to. 0x80000000 denotes 'unknown . | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| partitionRowPositionAtt6 | 1.3.6.1.4.1.412.2.4.36.1.6 | ||
| This specifies the position of the device in a row of the partition. For example, if it takes two 8-bit memory devices to form a 16-bit row, then a value of '2'in this attribute means the device is the second device. 0 is an invalid return value. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| interleavePositionAtt7 | 1.3.6.1.4.1.412.2.4.36.1.7 | ||
| The position of this device in an interleave. 0 indicates non-interleaved. 1 indicates the first position 2 the second, and so on. For example, in a 2:1 interleave, a value of '1' would indicate the device is in the 'even' position, in a 4:1 interleave this would be the first of four possible positions). 0x80000000 denotes 'unknown' or'unsupported'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dataDepthAtt8 | 1.3.6.1.4.1.412.2.4.36.1.8 | ||
| The maximum number of consecutive rows accessed from this device in a single interleaved transfer. For example, if a device transfers two rows each time it is read, its Interleaved Data Depth would be 2. If that device is 2:1 interleaved and in Interleave Position '1', then the rows mapped to that device would be rows 1,2,5,6,9,10, etc. If the device is not part of an interleave, this value should be 0. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dMTFSystemResources2Table | 1.3.6.1.4.1.412.2.4.37 | ||
| This group describes the base level of Memory, I/O, DMA, and INT (interrupt) resources that are used by a device in the system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdMTFSystemResources2 | |||
| dMTFSystemResources2Entry | 1.3.6.1.4.1.412.2.4.37.1 | ||
| This group describes the base level of Memory, I/O, DMA, and INT (interrupt) resources that are used by a device in the system. | |||
| OBJECT-TYPE | |||
| SdMTFSystemResources2 | |||
| dMTFSystemResources2State | 1.3.6.1.4.1.412.2.4.37.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| systemResourcesIndexAtt1 | 1.3.6.1.4.1.412.2.4.37.1.1 | ||
| A number that uniquely identifies the rows in this table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| resourceUserAtt2 | 1.3.6.1.4.1.412.2.4.37.1.2 | ||
| A unique number for each different 'resource user' that has resources specified in this table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| resourceSetAtt3 | 1.3.6.1.4.1.412.2.4.37.1.3 | ||
| A number used as the ID of a set of Memory, I/O, DMA and/or INT resources for the resource user. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| resourceAssignmentAtt4 | 1.3.6.1.4.1.412.2.4.37.1.4 | ||
| Describes the state of the assignment of this set of resources. (Note: This value must be the same for all resources within a given set.) | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), allocated(3), assignable(4), temporaryAssignment(5) | ||
| resourceTypeAtt5 | 1.3.6.1.4.1.412.2.4.37.1.5 | ||
| The type of resource described by this row. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), memory(3), iO(4), iRQ(5), dMA(6) | ||
| resourceNumberAtt6 | 1.3.6.1.4.1.412.2.4.37.1.6 | ||
| DMA or IRQ number - 0 for Memory and I/O ranges. This is the interrupt or DMA number relative to the bus that the interrupt is sourced from. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| resourceInfoIDAtt7 | 1.3.6.1.4.1.412.2.4.37.1.7 | ||
| ID of the row in the 'Info' table for this type of system resource. E.g. if this Resource Type is 'I/O' then this would be an index into the 'System Resource I/O Info' table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| startAddressAtt8 | 1.3.6.1.4.1.412.2.4.37.1.8 | ||
| Starting physical address for this memory range, or the minimum base address if this attribute is being used to describe a programmable range. 0 for IRQ and DMA resources. | |||
| OBJECT-TYPE | |||
| DmiInteger64 | |||
| endAddressAtt9 | 1.3.6.1.4.1.412.2.4.37.1.9 | ||
| Ending physical address (address of last byte) for this memory range, or the maximum configurable base address if this attribute is being used to describe a programmable range. 0 for IRQ and DMA resources. | |||
| OBJECT-TYPE | |||
| DmiInteger64 | |||
| resourceSizeAtt10 | 1.3.6.1.4.1.412.2.4.37.1.10 | ||
| jNumber of consecutive bytes that a memory or I/O resource consumes. 0 for IRQ and DMA resources. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| baseAlignmentAtt11 | 1.3.6.1.4.1.412.2.4.37.1.11 | ||
| Alignment of Start Address, in bytes. Indicates the granularity of the increments in which a programmable range can be set. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| shareableAtt12 | 1.3.6.1.4.1.412.2.4.37.1.12 | ||
| Indicates whether the resource is shareable. | |||
| OBJECT-TYPE | |||
| INTEGER | false(0), true(1), unknown(2) | ||
| sharedAtt13 | 1.3.6.1.4.1.412.2.4.37.1.13 | ||
| Indicates whether this resource, or a portion of this resource, is shared with another device. | |||
| OBJECT-TYPE | |||
| INTEGER | false(0), true(1), unknown(2) | ||
| dMTFSystemResourceDeviceInfoTable | 1.3.6.1.4.1.412.2.4.38 | ||
| This group describes the base level of Memory, I/O, DMA, and INT (interrupt) resources that are used by a device in the system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdMTFSystemResourceDeviceInfo | |||
| dMTFSystemResourceDeviceInfoEntry | 1.3.6.1.4.1.412.2.4.38.1 | ||
| This group describes the base level of Memory, I/O, DMA, and INT (interrupt) resources that are used by a device in the system. | |||
| OBJECT-TYPE | |||
| SdMTFSystemResourceDeviceInfo | |||
| dMTFSystemResourceDeviceInfoState | 1.3.6.1.4.1.412.2.4.38.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| resourceUserAtt1 | 1.3.6.1.4.1.412.2.4.38.1.1 | ||
| A number that uniquely identifies this device. This number may be derived from the 'device number' that is assigned by 'Plug N Play', or may be uniquely assigned by the component instrumentation. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| deviceIDAtt2 | 1.3.6.1.4.1.412.2.4.38.1.2 | ||
| Physical Device ID from Config manager info. Equal to the CISTPL-MANFID field for PCMCIA devices. 0xFFFFFFFF = Unknown | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| deviceSerialNumberAtt3 | 1.3.6.1.4.1.412.2.4.38.1.3 | ||
| Device Serial Number from Config manager info. 0 = Undefined | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| logicalDeviceIDClassCodeAtt4 | 1.3.6.1.4.1.412.2.4.38.1.4 | ||
| Logical device ID for PnP ISA devices, Class code for PCI devices, CISTPL-FUNCID for PCMCIA devices. 0xFFFFFFFF = Undefined, 0 = reserved | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| deviceFlagsAtt5 | 1.3.6.1.4.1.412.2.4.38.1.5 | ||
| Device flags from config manager info. Bit 0: 1 = device has been initialized, Bit 1: 1 = device is enabled, Bit 2: 1 = device config has been locked, Bit 3: 1 = device has temporary config resources assigned, Bit 4: 1 = device is reconfigurable | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| deviceNumberAtt6 | 1.3.6.1.4.1.412.2.4.38.1.6 | ||
| Device Number for PCI Devices, Logical Device number for PnP Devices. 0 otherwise. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| functionNumberAtt7 | 1.3.6.1.4.1.412.2.4.38.1.7 | ||
| Function Number for PCI & EISA Devices. 0 otherwise. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| busTypeAtt8 | 1.3.6.1.4.1.412.2.4.38.1.8 | ||
| Bus number (0-255) for PCI Devices, Slot number for EISA and PnP Devices, Card logical socket number for PCMCIA devices. Zero otherwise. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| cMReservedAtt9 | 1.3.6.1.4.1.412.2.4.38.1.9 | ||
| Data from the Reserved field of the Configuration Manager bus access structure, or 0. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dMTFSystemResourceMemoryInfoTable | 1.3.6.1.4.1.412.2.4.39 | ||
| This group presents additional information about memory resource that have been defined in the System Resources table. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdMTFSystemResourceMemoryInfo | |||
| dMTFSystemResourceMemoryInfoEntry | 1.3.6.1.4.1.412.2.4.39.1 | ||
| This group presents additional information about memory resource that have been defined in the System Resources table. | |||
| OBJECT-TYPE | |||
| SdMTFSystemResourceMemoryInfo | |||
| dMTFSystemResourceMemoryInfoState | 1.3.6.1.4.1.412.2.4.39.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| systemResourceMemoryInfoIndexAtt1 | 1.3.6.1.4.1.412.2.4.39.1.1 | ||
| A number the uniquely identifies rows in this table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| iSAPCMCIARangeDescriptorAtt2 | 1.3.6.1.4.1.412.2.4.39.1.2 | ||
| For PnP ISA/PCMCIA memory range descriptor compatibility. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), x8BitMemoryOnly(3), x16BitMemoryOnly(4), x8And16BitMemorySupported(5), x32BitMemoryOnly(6) | ||
| eISARangeDescriptorAtt3 | 1.3.6.1.4.1.412.2.4.39.1.3 | ||
| For PnP EISA memory range descriptor compatibility. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), x8BitMemoryOnly(3), x16BitMemoryOnly(4), x8And16BitMemorySupported(5), x32BitMemoryOnly(6) | ||
| decodeSupportAtt4 | 1.3.6.1.4.1.412.2.4.39.1.4 | ||
| For PnP memory range descriptor compatibility. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), decodeSupportsHighAddress(3), decodeSupportsRangeLength(4) | ||
| cacheableAtt5 | 1.3.6.1.4.1.412.2.4.39.1.5 | ||
| Indicates whether it is allowable for this memory range to be cached or not. | |||
| OBJECT-TYPE | |||
| INTEGER | false(0), true(1), unknown(2) | ||
| cacheTypeAtt6 | 1.3.6.1.4.1.412.2.4.39.1.6 | ||
| Indicates Cache Type that is compatible with this resource. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), writeBack-1(3), writeThrough-1(4) | ||
| readWriteAtt7 | 1.3.6.1.4.1.412.2.4.39.1.7 | ||
| Indicates the read-write accessibility of this memory resource. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), rOMReadOnly(3), rAMReadwrite(4) | ||
| dMTFSystemResourceIOInfoTable | 1.3.6.1.4.1.412.2.4.40 | ||
| This group presents additional information about I/O resources that have been defined in the System Resources table. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdMTFSystemResourceIOInfo | |||
| dMTFSystemResourceIOInfoEntry | 1.3.6.1.4.1.412.2.4.40.1 | ||
| This group presents additional information about I/O resources that have been defined in the System Resources table. | |||
| OBJECT-TYPE | |||
| SdMTFSystemResourceIOInfo | |||
| dMTFSystemResourceIOInfoState | 1.3.6.1.4.1.412.2.4.40.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| systemResourceIOInfoIndexAtt1 | 1.3.6.1.4.1.412.2.4.40.1.1 | ||
| A number the uniquely identifies rows in this table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| iODecodeAtt2 | 1.3.6.1.4.1.412.2.4.40.1.2 | ||
| Number of bits used for I/O decode | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), x10Bits(3), x16Bits(4) | ||
| dMTFSystemResourceIRQInfoTable | 1.3.6.1.4.1.412.2.4.41 | ||
| This group presents additional information about I/O resources that have been defined in the System Resources table. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdMTFSystemResourceIRQInfo | |||
| dMTFSystemResourceIRQInfoEntry | 1.3.6.1.4.1.412.2.4.41.1 | ||
| This group presents additional information about I/O resources that have been defined in the System Resources table. | |||
| OBJECT-TYPE | |||
| SdMTFSystemResourceIRQInfo | |||
| dMTFSystemResourceIRQInfoState | 1.3.6.1.4.1.412.2.4.41.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| systemResourceIRQInfoIndexAtt1 | 1.3.6.1.4.1.412.2.4.41.1.1 | ||
| A number the uniquely identifies rows in this table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| triggerTypeAtt2 | 1.3.6.1.4.1.412.2.4.41.1.2 | ||
| The trigger type for this interrupt. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), level(3), edge(4) | ||
| triggerLevelAtt3 | 1.3.6.1.4.1.412.2.4.41.1.3 | ||
| The trigger level for this interrupt. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), activeLow(3), activeHigh(4) | ||
| dMTFSystemResourceDMAInfoTable | 1.3.6.1.4.1.412.2.4.42 | ||
| This group presents additional information about DMA resources that have been defined in the System Resources table. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdMTFSystemResourceDMAInfo | |||
| dMTFSystemResourceDMAInfoEntry | 1.3.6.1.4.1.412.2.4.42.1 | ||
| This group presents additional information about DMA resources that have been defined in the System Resources table. | |||
| OBJECT-TYPE | |||
| SdMTFSystemResourceDMAInfo | |||
| dMTFSystemResourceDMAInfoState | 1.3.6.1.4.1.412.2.4.42.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| systemResourceDMAInfoIndexAtt1 | 1.3.6.1.4.1.412.2.4.42.1.1 | ||
| A number the uniquely identifies rows in this table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dMATransferWidthAtt2 | 1.3.6.1.4.1.412.2.4.42.1.2 | ||
| Width of DMA transfers supported | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), x8Bit(3), x8And16Bit(4), x16Bit(5), x32Bit(6), x64Bit(7), x128Bit(8) | ||
| dMAAddressSizeAtt3 | 1.3.6.1.4.1.412.2.4.42.1.3 | ||
| The width of the DMA address. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), x8Bit(3), x16Bit(5), x32Bit(6), x64Bit(7) | ||
| dMAMaximumTransferSizeAtt4 | 1.3.6.1.4.1.412.2.4.42.1.4 | ||
| The maximum number of bytes that can be transferred by this DMA Channel. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dMATransferPreferenceAtt5 | 1.3.6.1.4.1.412.2.4.42.1.5 | ||
| DMA transfer type preference. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), x8Bit(3), x8And16Bit(4), x16Bit(5), x32Bit(6), x64Bit(7) | ||
| busMasterAtt6 | 1.3.6.1.4.1.412.2.4.42.1.6 | ||
| Indicates whether the device is using DMA is a bus master. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), logicalDeviceIsNotABusMaster(3), logicalDeviceIsABusMaster(4) | ||
| byteModeAtt7 | 1.3.6.1.4.1.412.2.4.42.1.7 | ||
| Indicates whether DMA may execute in 'count by byte' mode. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), dMAMayNotExecuteInCountByByteMode(3), dMAMayExecuteInCountByByteMode(4) | ||
| wordModeAtt8 | 1.3.6.1.4.1.412.2.4.42.1.8 | ||
| Indicates whether DMA may execute in 'count by word' mode. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), dMAMayNotExecuteInCountByWordMode(3), dMAMayExecuteInCountByWordMode(4) | ||
| channelTimingAtt9 | 1.3.6.1.4.1.412.2.4.42.1.9 | ||
| DMA channel speed support. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), iSACompatible(3), typeA(4), typeB(5), typeF(6) | ||
| typeCTimingAtt10 | 1.3.6.1.4.1.412.2.4.42.1.10 | ||
| Indicates whether C type (burst) timing is supported. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), iSACompatible(3), cTypeTimingIsNotSupported(4), cTypeTimingIsSupported(5) | ||
| dMTFSystemHardwareSecurityTable | 1.3.6.1.4.1.412.2.4.49 | ||
| This group describes the system-wide hardware security settings. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdMTFSystemHardwareSecurity | |||
| dMTFSystemHardwareSecurityEntry | 1.3.6.1.4.1.412.2.4.49.1 | ||
| This group describes the system-wide hardware security settings. | |||
| OBJECT-TYPE | |||
| SdMTFSystemHardwareSecurity | |||
| powerOnPasswordStatusAtt1 | 1.3.6.1.4.1.412.2.4.49.1.1 | ||
| The current power-on password setting on the system. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), disabled(3), enabled(4), notImplemented(5) | ||
| keyboardPasswordStatusAtt2 | 1.3.6.1.4.1.412.2.4.49.1.2 | ||
| The current keyboard password setting on the system | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), disabled(3), enabled(4), notImplemented(5) | ||
| administratorPasswordStatisAtt3 | 1.3.6.1.4.1.412.2.4.49.1.3 | ||
| The current administrator password setting on the system. This password is required to make hardware configuration changes to the system. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), disabled(3), enabled(4), notImplemented(5) | ||
| frontPanelResetStatusAtt4 | 1.3.6.1.4.1.412.2.4.49.1.4 | ||
| The present status of the front panel reset button capability. If Enabled, the machine can be reset via the front panel reset button. If Disabled, the reset button, if available, is inoperative. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), disabled(3), enabled(4), notImplemented(5) | ||
| dMTFSystemPowerControlsTable | 1.3.6.1.4.1.412.2.4.51 | ||
| This group defines attributes for controlling the main power supply to the system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdMTFSystemPowerControls | |||
| dMTFSystemPowerControlsEntry | 1.3.6.1.4.1.412.2.4.51.1 | ||
| This group defines attributes for controlling the main power supply to the system. | |||
| OBJECT-TYPE | |||
| SdMTFSystemPowerControls | |||
| powerControlRequestAtt1 | 1.3.6.1.4.1.412.2.4.51.1.1 | ||
| Reading the value of this attribute gives the value of the last valid power control request that was written into it. Writing a valid value into it causes the appropriate power control action to be executed immediately. Writing an invalid or unimplemented value causes no change. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), powerOff(3), powerOffThenOnAgain(4), enterStandbyMode(5), enterSuspendMode(6), enterHibernationMode(7) | ||
| timedPowerOnAvailableAtt2 | 1.3.6.1.4.1.412.2.4.51.1.2 | ||
| Defines whether a timed power-on facility is available. | |||
| OBJECT-TYPE | |||
| INTEGER | false(0), true(1), unknown(2) | ||
| timeToNextScheduledPowerOnAtt3 | 1.3.6.1.4.1.412.2.4.51.1.3 | ||
| The number of seconds until the next timed power-on is scheduled to occur. A value of 0 means that if the system is powered off, no automatic timed poweron will occur. A value of 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dMTFVoltageProbeTable | 1.3.6.1.4.1.412.2.4.53 | ||
| This group defines the attributes for the voltage probes in this system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdMTFVoltageProbe | |||
| dMTFVoltageProbeEntry | 1.3.6.1.4.1.412.2.4.53.1 | ||
| This group defines the attributes for the voltage probes in this system. | |||
| OBJECT-TYPE | |||
| SdMTFVoltageProbe | |||
| dMTFVoltageProbeEvt1 | 1.3.6.1.4.1.412.2.4.53.1 | ||
| powerSupplyStatusChange | |||
| TRAP-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dMTFVoltageProbeEvSys | |||
| dMTFVoltageProbeEvSub | |||
| dMTFVoltageProbeState | 1.3.6.1.4.1.412.2.4.53.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| voltageProbeIndexAtt1 | 1.3.6.1.4.1.412.2.4.53.1.1 | ||
| Index into this voltage probe table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| voltageProbeLocationAtt2 | 1.3.6.1.4.1.412.2.4.53.1.2 | ||
| Identifies the physical location of the voltage probe. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), processor(3), disk(4), peripheralBay(5), systemManagementModule(6), motherboard(7), memoryModule(8), processorModule(9), powerUnit(10), addInCard(11) | ||
| voltageProbeDescriptionAtt3 | 1.3.6.1.4.1.412.2.4.53.1.3 | ||
| Additional descriptive information about the voltage probe or probe's location. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| voltageStatusAtt4 | 1.3.6.1.4.1.412.2.4.53.1.4 | ||
| Defines the status of the voltage monitored by this voltage probe. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), oK(3), nonCritical(4), critical(5), nonRecoverable(6) | ||
| voltageProbeVoltageLevelAtt5 | 1.3.6.1.4.1.412.2.4.53.1.5 | ||
| The current voltage level of this voltage probe in millivolts. 0x8000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| monitoredVoltageNominalLevelAtt6 | 1.3.6.1.4.1.412.2.4.53.1.6 | ||
| The nominal voltage level of the voltage monitored by this probe in millivolts. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| monitoredVoltageNormalMaximumAtt7 | 1.3.6.1.4.1.412.2.4.53.1.7 | ||
| The normal maximum voltage level of the voltage monitored by this probe in millivolts. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| monitoredVoltageNormalMinimumAtt8 | 1.3.6.1.4.1.412.2.4.53.1.8 | ||
| The normal minimum voltage level of the voltage monitored by this probe in millivolts. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| voltageProbeMaximumAtt9 | 1.3.6.1.4.1.412.2.4.53.1.9 | ||
| The maximum voltage level specified to be readable by this probe in millivolts. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| voltageProbeMinimumAtt10 | 1.3.6.1.4.1.412.2.4.53.1.10 | ||
| The minimum voltage level specified to be readable by this probe in millivolts. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| voltageLevelLowerThresholdNonCriticalAtt11 | 1.3.6.1.4.1.412.2.4.53.1.11 | ||
| The lower non-critical threshold for the voltage level set by the user, in millivolts. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| voltageLevelUpperThresholdNonCriticalAtt12 | 1.3.6.1.4.1.412.2.4.53.1.12 | ||
| The upper non-critical threshold for the voltage probe, in millivolts. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| voltageLevelLowerThresholdCriticalAtt13 | 1.3.6.1.4.1.412.2.4.53.1.13 | ||
| The lower critical threshold for the voltage probe, in millivolt . 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| voltageLevelUpperThresholdCriticalAtt14 | 1.3.6.1.4.1.412.2.4.53.1.14 | ||
| The upper critical threshold for the voltage probe, in millivolt . 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| voltageLevelLowerThresholdNonRecoverableAtt15 | 1.3.6.1.4.1.412.2.4.53.1.15 | ||
| The lower non-recoverable threshold for the voltage probe, in millivolts. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| voltageLevelUpperThresholdNonRecoverableAtt16 | 1.3.6.1.4.1.412.2.4.53.1.16 | ||
| The upper non-recoverable threshold for the voltage probe, in millivolts. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| voltageProbeResolutionAtt17 | 1.3.6.1.4.1.412.2.4.53.1.17 | ||
| The resolution for the reading from this voltage probe, in tenths of millivolts. '0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| voltageProbeToleranceAtt18 | 1.3.6.1.4.1.412.2.4.53.1.18 | ||
| The tolerance for the reading from this voltage probe, in plus/minus millivolts. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| voltageProbeAccuracyAtt19 | 1.3.6.1.4.1.412.2.4.53.1.19 | ||
| The accuracy for the reading from this voltage probe, in plus/minus hundredths of a percent. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| fRUGroupIndexAtt20-2 | 1.3.6.1.4.1.412.2.4.53.1.20 | ||
| Index into the FRU table | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| operationalGroupIndexAtt21-2 | 1.3.6.1.4.1.412.2.4.53.1.21 | ||
| Index into the Operational State table | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dMTFVoltageProbeEvSys | 1.3.6.1.4.1.412.2.4.53.6 | ||
| The major functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dMTFVoltageProbeEvSub | 1.3.6.1.4.1.412.2.4.53.7 | ||
| The minor functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dMTFTemperatureProbeTable | 1.3.6.1.4.1.412.2.4.54 | ||
| This group defines the attributes for the temperature probes in this system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdMTFTemperatureProbe | |||
| dMTFTemperatureProbeEntry | 1.3.6.1.4.1.412.2.4.54.1 | ||
| This group defines the attributes for the temperature probes in this system. | |||
| OBJECT-TYPE | |||
| SdMTFTemperatureProbe | |||
| dMTFTemperatureProbeEvt1 | 1.3.6.1.4.1.412.2.4.54.1 | ||
| coolingDeviceStatusChange | |||
| TRAP-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dMTFTemperatureProbeEvSys | |||
| dMTFTemperatureProbeEvSub | |||
| dMTFTemperatureProbeState | 1.3.6.1.4.1.412.2.4.54.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| temperatureProbeTableIndexAtt1 | 1.3.6.1.4.1.412.2.4.54.1.1 | ||
| Index into this temperature probe table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| temperatureProbeLocationAtt2 | 1.3.6.1.4.1.412.2.4.54.1.2 | ||
| Identifies the physical location of the temperature probe. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), processor(3), disk(4), peripheralBay(5), sMBMaster(6), motherboard(7), memoryModule(8), processorModule(9), powerUnit(10), addInCard(11) | ||
| temperatureProbeDescriptionAtt3 | 1.3.6.1.4.1.412.2.4.54.1.3 | ||
| Additional descriptive information about the temperature probe or probe's location. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| temperatureStatusAtt4 | 1.3.6.1.4.1.412.2.4.54.1.4 | ||
| Defines the status of the temperature monitored by this temperat re probe. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), oK(3), nonCritical(4), critical(5), nonRecoverable(6) | ||
| temperatureProbeTemperatureReadingAtt5 | 1.3.6.1.4.1.412.2.4.54.1.5 | ||
| The present temperature reading of this temperature probe in 1/10th degrees C. 0x8000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| monitoredTemperatureNominalReadingAtt6 | 1.3.6.1.4.1.412.2.4.54.1.6 | ||
| The nominal temperature reading of the temperature monitored by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| monitoredTemperatureNormalMaximumAtt7 | 1.3.6.1.4.1.412.2.4.54.1.7 | ||
| The normal maximum temperature reading of the temperature monitored by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| monitoredTemperatureNormalMinimumAtt8 | 1.3.6.1.4.1.412.2.4.54.1.8 | ||
| The normal minimum temperature reading of the temperature monitored by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| temperatureProbeMaximumAtt9 | 1.3.6.1.4.1.412.2.4.54.1.9 | ||
| The maximum temperature reading specified to be readable by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| temperatureProbeMinimumAtt10 | 1.3.6.1.4.1.412.2.4.54.1.10 | ||
| The minimum temperature reading specified to be readable by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| temperatureReadingLowerThresholdNonCriticalAtt11 | 1.3.6.1.4.1.412.2.4.54.1.11 | ||
| The lower non-critical threshold for the temperature reading set by the user, in 1/10th degrees C. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| temperatureReadingUpperThresholdNonCriticalAtt12 | 1.3.6.1.4.1.412.2.4.54.1.12 | ||
| The upper non-critical threshold for the temperature probe, in 1/10th degrees C. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| temperatureReadingLowerThresholdCriticalAtt13 | 1.3.6.1.4.1.412.2.4.54.1.13 | ||
| The lower critical threshold for the temperature probe, in 1/10 degrees C. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| temperatureReadingUpperThresholdCriticalAtt14 | 1.3.6.1.4.1.412.2.4.54.1.14 | ||
| The upper critical threshold for the temperature probe, in /10th degrees C. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| temperatureReadingLowerThresholdNonRecoverableAtt15 | 1.3.6.1.4.1.412.2.4.54.1.15 | ||
| The lower non-recoverable threshold for the temperature probe, in 1/10th degrees C. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| temperatureReadingUpperThresholdNonRecoverableAtt16 | 1.3.6.1.4.1.412.2.4.54.1.16 | ||
| The upper non-recoverable threshold for the temperature probe, in 1/10th degrees C. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| temperatureProbeResolutionAtt17 | 1.3.6.1.4.1.412.2.4.54.1.17 | ||
| The resolution for the reading from this temperature probe, in tenths of 1/10th degrees C. '0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| temperatureProbeToleranceAtt18 | 1.3.6.1.4.1.412.2.4.54.1.18 | ||
| The tolerance for the reading from this temperature probe, in plus/minus 1/10 degrees C. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| temperatureProbeAccuracyAtt19 | 1.3.6.1.4.1.412.2.4.54.1.19 | ||
| The accuracy for the reading from this temperature probe, in plus/minus hundredths of a percent. 0x80000000 denotes 'unknown' or'unsupport d'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| fRUGroupIndexAtt20-1 | 1.3.6.1.4.1.412.2.4.54.1.20 | ||
| Index into the FRU table. A value of -1 indicates that this device is not an FRU. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| operationalGroupIndexAtt21-1 | 1.3.6.1.4.1.412.2.4.54.1.21 | ||
| Index into the Operational State table | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dMTFTemperatureProbeEvSys | 1.3.6.1.4.1.412.2.4.54.6 | ||
| The major functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dMTFTemperatureProbeEvSub | 1.3.6.1.4.1.412.2.4.54.7 | ||
| The minor functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dMTFElectricalCurrentProbeTable | 1.3.6.1.4.1.412.2.4.55 | ||
| This group defines the attributes for the current probes in this system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdMTFElectricalCurrentProbe | |||
| dMTFElectricalCurrentProbeEntry | 1.3.6.1.4.1.412.2.4.55.1 | ||
| This group defines the attributes for the current probes in this system. | |||
| OBJECT-TYPE | |||
| SdMTFElectricalCurrentProbe | |||
| dMTFElectricalCurrentProbeEvt1 | 1.3.6.1.4.1.412.2.4.55.1 | ||
| powerSupplyStatusChange | |||
| TRAP-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dMTFElectricalCurrentProbeEvSys | |||
| dMTFElectricalCurrentProbeEvSub | |||
| dMTFElectricalCurrentProbeState | 1.3.6.1.4.1.412.2.4.55.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| electricalCurrentProbeTableIndexAtt1 | 1.3.6.1.4.1.412.2.4.55.1.1 | ||
| Index into this electrical current probe table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| electricalCurrentProbeLocationAtt2 | 1.3.6.1.4.1.412.2.4.55.1.2 | ||
| Identifies the physical location of the electrical current probe. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), processor(3), disk(4), peripheralBay(5), sMBMaster(6), motherboard(7), memoryModule(8), processorModule(9), powerUnit(10), addInCard(11) | ||
| electricalCurrentProbeDescriptionAtt3 | 1.3.6.1.4.1.412.2.4.55.1.3 | ||
| Additional descriptive information about the electrical current probe or probe's location. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| electricalCurrentStatusAtt4 | 1.3.6.1.4.1.412.2.4.55.1.4 | ||
| Defines the status of the electrical current monitored by this electrical current probe. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), oK(3), nonCritical(4), critical(5), nonRecoverable(6) | ||
| electricalCurrentProbeReadingAtt5 | 1.3.6.1.4.1.412.2.4.55.1.5 | ||
| The present electrical current reading of this probe in milliamp . 0x8000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| monitoredElectricalCurrentNominalReadingAtt6 | 1.3.6.1.4.1.412.2.4.55.1.6 | ||
| The nominal electrical current reading of the current monitored by this probe in milliamps. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| monitoredElectricalCurrentNormalMaximumAtt7 | 1.3.6.1.4.1.412.2.4.55.1.7 | ||
| The normal maximum electrical current reading of the current monitored by this probe in milliamps. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| monitoredElectricalCurrentNormalMinimumAtt8 | 1.3.6.1.4.1.412.2.4.55.1.8 | ||
| The normal minimum electrical current reading of the current monitored by this probe in milliamps. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| electricalCurrentProbeMaximumAtt9 | 1.3.6.1.4.1.412.2.4.55.1.9 | ||
| The maximum electrical current reading specified to be readable by this probe in milliamps. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| electricalCurrentProbeMinimumAtt10 | 1.3.6.1.4.1.412.2.4.55.1.10 | ||
| The minimum electrical current reading specified to be readable by this probe in milliamps. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| electricalCurrentReadingLowerThresholdNonCriticalAtt11 | 1.3.6.1.4.1.412.2.4.55.1.11 | ||
| The lower non-critical threshold for the electrical current reading set by the user, in milliamps. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| electricalCurrentReadingUpperThresholdNonCriticalAtt12 | 1.3.6.1.4.1.412.2.4.55.1.12 | ||
| The upper non-critical threshold for the electrical current reading, in milliamps. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| electricalCurrentReadingLowerThresholdCriticalAtt13 | 1.3.6.1.4.1.412.2.4.55.1.13 | ||
| The lower critical threshold for the electrical current probe, in milliamps. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| currentReadingUpperThresholdCriticalAtt14 | 1.3.6.1.4.1.412.2.4.55.1.14 | ||
| The upper critical threshold for the electrical current probe, in milliamps. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| electricalCurrentReadingLowerThresholdNonRecoverabAtt15 | 1.3.6.1.4.1.412.2.4.55.1.15 | ||
| The lower non-recoverable threshold for the electrical current probe, in milliamps. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| electricalCurrentReadingUpperThresholdNonRecoverabAtt16 | 1.3.6.1.4.1.412.2.4.55.1.16 | ||
| The upper non-recoverable threshold for the electrical current probe, in milliamps. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| electricalCurrentProbeResolutionAtt17 | 1.3.6.1.4.1.412.2.4.55.1.17 | ||
| The resolution for the reading from this electrical current probe, in tenths of milliamps. '0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| electricalCurrentProbeToleranceAtt18 | 1.3.6.1.4.1.412.2.4.55.1.18 | ||
| The tolerance for the reading from this electrical current probe, in plus/minus milliamps. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| electricalCurrentProbeAccuracyAtt19 | 1.3.6.1.4.1.412.2.4.55.1.19 | ||
| The accuracy for the reading from this electrical current probe, in plus/minus hundredths of a percent. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| fRUGroupIndexAtt20 | 1.3.6.1.4.1.412.2.4.55.1.20 | ||
| Index into the FRU table | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| operationalGroupIndexAtt21 | 1.3.6.1.4.1.412.2.4.55.1.21 | ||
| Index into the Operational State table | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dMTFElectricalCurrentProbeEvt2 | 1.3.6.1.4.1.412.2.4.55.2 | ||
| coolingDeviceStatusChange | |||
| TRAP-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dMTFElectricalCurrentProbeEvSys | |||
| dMTFElectricalCurrentProbeEvSub | |||
| dMTFElectricalCurrentProbeEvSys | 1.3.6.1.4.1.412.2.4.55.6 | ||
| The major functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dMTFElectricalCurrentProbeEvSub | 1.3.6.1.4.1.412.2.4.55.7 | ||
| The minor functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dMTFPhysicalContainerGlobalTableTable | 1.3.6.1.4.1.412.2.4.63 | ||
| This group of attributes describes the fields in a row ofthe Physical Container Global Table. This table lists all of the containers (e.g. chassis, sub-chassis, etc.) included within the component whose structure is being described | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdMTFPhysicalContainerGlobalTable | |||
| dMTFPhysicalContainerGlobalTableEntry | 1.3.6.1.4.1.412.2.4.63.1 | ||
| This group of attributes describes the fields in a row ofthe Physical Container Global Table. This table lists all of the containers (e.g. chassis, sub-chassis, etc.) included within the component whose structure is being described | |||
| OBJECT-TYPE | |||
| SdMTFPhysicalContainerGlobalTable | |||
| dMTFPhysicalContainerGlobalTableEvt1 | 1.3.6.1.4.1.412.2.4.63.1 | ||
| securitySettingsChange | |||
| TRAP-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dMTFPhysicalContainerGlobalTableEvSys | |||
| dMTFPhysicalContainerGlobalTableEvSub | |||
| dMTFPhysicalContainerGlobalTableState | 1.3.6.1.4.1.412.2.4.63.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| containerOrChassisTypeAtt1 | 1.3.6.1.4.1.412.2.4.63.1.1 | ||
| The type of container or chassis. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), desktop(3), lowProfileDesktop(4), pizzaBox(5), miniTower(6), tower(7), portable(8), lapTop(9), notebook(10), handHeld(11), dockingStation(12), allInOne(13), subNotebook(14), spaceSaving(15), lunchBox(16), mainSystemChassis(17), expansionChassis(18), subChassis(19), busExpansionChassis(20), peripheralChassis(21), rAIDChassis(22), rackMountChassis(23), sealedCasePC(24) | ||
| assetTagAtt2 | 1.3.6.1.4.1.412.2.4.63.1.2 | ||
| The Container asset tag string. This asset tag string is writeable by the system administrator. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| chassisLockPresentAtt3 | 1.3.6.1.4.1.412.2.4.63.1.3 | ||
| If true, a chassis lock is present on the Container. | |||
| OBJECT-TYPE | |||
| INTEGER | false(0), true(1) | ||
| bootupStateAtt4 | 1.3.6.1.4.1.412.2.4.63.1.4 | ||
| The current state of this system when it booted. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), oK(3), warning(4), critical(5), nonRecoverable-1(6) | ||
| powerStateAtt5 | 1.3.6.1.4.1.412.2.4.63.1.5 | ||
| The current state of the power supply or battery(s) for this system. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), oK(3), warning(4), critical(5), nonRecoverable(6) | ||
| thermalStateAtt6 | 1.3.6.1.4.1.412.2.4.63.1.6 | ||
| The current thermal state of this Container. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), oK(3), warning(4), critical(5), nonRecoverable(6) | ||
| fRUGroupIndexAtt7 | 1.3.6.1.4.1.412.2.4.63.1.7 | ||
| If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a FRU. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| operationalGroupIndexAtt8 | 1.3.6.1.4.1.412.2.4.63.1.8 | ||
| The index into the Operational State table for this device if applicable. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| containerIndexAtt9 | 1.3.6.1.4.1.412.2.4.63.1.9 | ||
| A unique index for the Physical Container in Physical Container Global Table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| containerNameAtt10 | 1.3.6.1.4.1.412.2.4.63.1.10 | ||
| This is any 64-octet long name that the user or system administr tor wishes to give this specific physical container. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| containerLocationAtt11 | 1.3.6.1.4.1.412.2.4.63.1.11 | ||
| This attribute is a string name for the location of the containe . This attribute is Read-Write and may be set to any appropriate value by the user. The string may be 128 octets long. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| containerSecurityStatusAtt12 | 1.3.6.1.4.1.412.2.4.63.1.12 | ||
| This attribute describes whether the Container is physically secure or not. This includes the state of the door lock, or the boot devices or the keyboard or mouse. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), noSecurityBreachDetected(3), containerSecurityBreachAttempted(4), containerSecurityBreached(5) | ||
| dMTFPhysicalContainerGlobalTableEvt2 | 1.3.6.1.4.1.412.2.4.63.2 | ||
| powerSupplyStatusChange | |||
| TRAP-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dMTFPhysicalContainerGlobalTableEvSys | |||
| dMTFPhysicalContainerGlobalTableEvSub | |||
| dMTFPhysicalContainerGlobalTableEvt3 | 1.3.6.1.4.1.412.2.4.63.3 | ||
| coolingDeviceStatusChange | |||
| TRAP-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dMTFPhysicalContainerGlobalTableEvSys | |||
| dMTFPhysicalContainerGlobalTableEvSub | |||
| dMTFPhysicalContainerGlobalTableEvt4 | 1.3.6.1.4.1.412.2.4.63.4 | ||
| physicalDeviceStatusChange | |||
| TRAP-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dMTFPhysicalContainerGlobalTableEvSys | |||
| dMTFPhysicalContainerGlobalTableEvSub | |||
| dMTFPhysicalContainerGlobalTableEvt5 | 1.3.6.1.4.1.412.2.4.63.5 | ||
| logicalDeviceStatusChange | |||
| TRAP-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dMTFPhysicalContainerGlobalTableEvSys | |||
| dMTFPhysicalContainerGlobalTableEvSub | |||
| dMTFPhysicalContainerGlobalTableEvSys | 1.3.6.1.4.1.412.2.4.63.6 | ||
| The major functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dMTFPhysicalContainerGlobalTableEvt6 | 1.3.6.1.4.1.412.2.4.63.6 | ||
| containerSecurityBreach | |||
| TRAP-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dMTFPhysicalContainerGlobalTableEvSys | |||
| dMTFPhysicalContainerGlobalTableEvSub | |||
| dMTFPhysicalContainerGlobalTableEvSub | 1.3.6.1.4.1.412.2.4.63.7 | ||
| The minor functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dMTFPhysicalContainerGlobalTableEvt7 | 1.3.6.1.4.1.412.2.4.63.7 | ||
| configurationError | |||
| TRAP-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dMTFPhysicalContainerGlobalTableEvSys | |||
| dMTFPhysicalContainerGlobalTableEvSub | |||
| dMTFPowerUnitGlobalTableTable | 1.3.6.1.4.1.412.2.4.66 | ||
| This global table describes all of the Power Units in this system component. The unique index of each Power Unit is the key into this table. A Power Unit is composed of potentially more than one Power Supply in a redundant configuration. Individual power supplies are described in the 'Power Supply' standard group. In that group, each individual power supply entry will point to a Power Unit in this table by using the index of the row in this table that describes the Power Unit. If a Power Unit is redunda | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdMTFPowerUnitGlobalTable | |||
| dMTFPowerUnitGlobalTableEntry | 1.3.6.1.4.1.412.2.4.66.1 | ||
| This global table describes all of the Power Units in this system component. The unique index of each Power Unit is the key into this table. A Power Unit is composed of potentially more than one Power Supply in a redundant configuration. Individual power supplies are described in the 'Power Supply' standard group. In that group, each individual power supply entry will point to a Power Unit in this table by using the index of the row in this table that describes the Power Unit. If a Power Unit is redunda | |||
| OBJECT-TYPE | |||
| SdMTFPowerUnitGlobalTable | |||
| dMTFPowerUnitGlobalTableState | 1.3.6.1.4.1.412.2.4.66.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| powerUnitIndexAtt1 | 1.3.6.1.4.1.412.2.4.66.1.1 | ||
| The unique index given to each Power Unit being described by this table. This unique index is the key into this table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| powerUnitRedundancyStatusAtt2 | 1.3.6.1.4.1.412.2.4.66.1.2 | ||
| Gives the redundancy status of the Power Unit. 'Fully Redundant means that all of the configured redundancy is still available; 'Degraded Redundancy' means that some failures have been experienced but some reduced amount of redundancy is still available; 'Redundancy Lost' means that a sufficie t number of failures have been experienced that no redundancy is available and the next failure experienced within the Power Unit will cause overall Power Unit failure. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), notApplicableUnitNotRedundant-1(3), offline(4), fullyRedundant-1(5), degradedRedundancy(6), redundancyLost(7) | ||
| dmtfDynOids | 1.3.6.1.4.1.412.3 | ||
| OBJECT IDENTIFIER | |||
| dmiDynOid386845712 | 1.3.6.1.4.1.412.3.386845712 | ||
| OBJECT IDENTIFIER | |||
| dmiDynOid73111109 | 1.3.6.1.4.1.412.3.386845712.73111109 | ||
| OBJECT IDENTIFIER | |||
| dmiDynOid3922453424 | 1.3.6.1.4.1.412.3.386845712.73111109.3922453424 | ||
| OBJECT IDENTIFIER | |||
| iNTELMIFTOMIBTable | 1.3.6.1.4.1.412.3.386845712.73111109.3922453424.1737102472 | ||
| This group maps the DMI attributes to SNMP. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SiNTELMIFTOMIB | |||
| iNTELMIFTOMIBEntry | 1.3.6.1.4.1.412.3.386845712.73111109.3922453424.1737102472.1 | ||
| This group maps the DMI attributes to SNMP. | |||
| OBJECT-TYPE | |||
| SiNTELMIFTOMIB | |||
| dellBaseBoardMIBAtt1 | 1.3.6.1.4.1.412.3.386845712.73111109.3922453424.1737102472.1.1 | ||
| The MIB name that defines this MIF | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| mIBOIDAtt2 | 1.3.6.1.4.1.412.3.386845712.73111109.3922453424.1737102472.1.2 | ||
| The MIB OID that corresponds to this MIF | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| disableTrapsAtt3 | 1.3.6.1.4.1.412.3.386845712.73111109.3922453424.1737102472.1.3 | ||
| Setting this value to 1 disables trap generation. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dell | 1.3.6.1.4.1.674 | ||
| OBJECT IDENTIFIER | |||
| server2 | 1.3.6.1.4.1.674.10891 | ||
| OBJECT IDENTIFIER | |||
| dellTemperatureProbeTable | 1.3.6.1.4.1.674.10891.300 | ||
| This group defines the attributes for the temperature probes this system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdellTemperatureProbe | |||
| dellTemperatureProbeEntry | 1.3.6.1.4.1.674.10891.300.1 | ||
| This group defines the attributes for the temperature probes this system. | |||
| OBJECT-TYPE | |||
| SdellTemperatureProbe | |||
| dellTemperatureProbeEvt1 | 1.3.6.1.4.1.674.10891.300.1 | ||
| coolingDeviceStatusChange | |||
| TRAP-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dellTemperatureProbeEvSys | |||
| dellTemperatureProbeEvSub | |||
| dellTemperatureProbeEvSol | |||
| dellTemperatureProbeState | 1.3.6.1.4.1.674.10891.300.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| tempParentIndexAtt1 | 1.3.6.1.4.1.674.10891.300.1.1 | ||
| An index into the chassis table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| tempIndexAtt2 | 1.3.6.1.4.1.674.10891.300.1.2 | ||
| index into this temperature probe table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| tempTypeAtt3 | 1.3.6.1.4.1.674.10891.300.1.3 | ||
| Defines the type of the temperature probe. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), tMC(3), tVM(4), eSM(5), backplane(6), harrierBackplane(7) | ||
| tempStatusAtt4 | 1.3.6.1.4.1.674.10891.300.1.4 | ||
| Current status of the temperature probe. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), oK(3), nonCritical(4), critical(5), nonRecoverable(6) | ||
| tempReadingAtt5 | 1.3.6.1.4.1.674.10891.300.1.5 | ||
| The reading of the temperature probe in tenths of degrees. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| tempMinWarnAtt6 | 1.3.6.1.4.1.674.10891.300.1.6 | ||
| The lower warning threshold for the temperature probe set by the user. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| tempMaxWarnAtt7 | 1.3.6.1.4.1.674.10891.300.1.7 | ||
| The upper warning threshold for the temperature probe set by the user. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| tempMinFailAtt8 | 1.3.6.1.4.1.674.10891.300.1.8 | ||
| The lower failure threshold for the temperature probe. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| tempMaxFailAtt9 | 1.3.6.1.4.1.674.10891.300.1.9 | ||
| The upper failure threshold for the temperature probe. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| tempLocationAtt10 | 1.3.6.1.4.1.674.10891.300.1.10 | ||
| The location of this temperature probe within the system. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| dellTemperatureProbeEvSys | 1.3.6.1.4.1.674.10891.300.6 | ||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dellTemperatureProbeEvSub | 1.3.6.1.4.1.674.10891.300.7 | ||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dellTemperatureProbeEvSol | 1.3.6.1.4.1.674.10891.300.8 | ||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2) | ||
| dellFanSensorTable | 1.3.6.1.4.1.674.10891.301 | ||
| This group defines the attributes for the fan probes this system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdellFanSensor | |||
| dellFanSensorEntry | 1.3.6.1.4.1.674.10891.301.1 | ||
| This group defines the attributes for the fan probes this system. | |||
| OBJECT-TYPE | |||
| SdellFanSensor | |||
| dellFanSensorEvt1 | 1.3.6.1.4.1.674.10891.301.1 | ||
| coolingDeviceStatusChange | |||
| TRAP-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dellFanSensorEvSys | |||
| dellFanSensorEvSub | |||
| dellFanSensorEvSol | |||
| dellFanSensorState | 1.3.6.1.4.1.674.10891.301.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| fansParentIndexAtt1 | 1.3.6.1.4.1.674.10891.301.1.1 | ||
| An index into the chassis table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| fansIndexAtt2 | 1.3.6.1.4.1.674.10891.301.1.2 | ||
| index into this fan probe table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| fansTypeAtt3 | 1.3.6.1.4.1.674.10891.301.1.3 | ||
| Defines the type of the fan probe. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), boolean(3), rPM(4) | ||
| fansStatusAtt4 | 1.3.6.1.4.1.674.10891.301.1.4 | ||
| Current status of the fan probe. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), oK(3), nonCritical(4), critical(5), nonRecoverable(6) | ||
| fansReadingAtt5 | 1.3.6.1.4.1.674.10891.301.1.5 | ||
| The reading of the fan probe in RPM (or boolean). | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| fansWarningMinAtt6 | 1.3.6.1.4.1.674.10891.301.1.6 | ||
| The lower warning threshold for the fan probe set by the user. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| fansMaxWarnAtt7 | 1.3.6.1.4.1.674.10891.301.1.7 | ||
| The upper warning threshold for the fan probe set by the user. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| fansMinFailAtt8 | 1.3.6.1.4.1.674.10891.301.1.8 | ||
| The lower failure threshold for the fan probe. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| fansMaxFailAtt9 | 1.3.6.1.4.1.674.10891.301.1.9 | ||
| The upper failure threshold for the fan probe. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| fansLocationAtt10 | 1.3.6.1.4.1.674.10891.301.1.10 | ||
| The location of this fan probe within the system. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| dellFanSensorEvSys | 1.3.6.1.4.1.674.10891.301.6 | ||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dellFanSensorEvSub | 1.3.6.1.4.1.674.10891.301.7 | ||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dellFanSensorEvSol | 1.3.6.1.4.1.674.10891.301.8 | ||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2) | ||
| dellVoltageProbeTable | 1.3.6.1.4.1.674.10891.302 | ||
| The Voltage group contains the data on all the voltage probes in a system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdellVoltageProbe | |||
| dellVoltageProbeEntry | 1.3.6.1.4.1.674.10891.302.1 | ||
| The Voltage group contains the data on all the voltage probes in a system. | |||
| OBJECT-TYPE | |||
| SdellVoltageProbe | |||
| dellVoltageProbeEvt1 | 1.3.6.1.4.1.674.10891.302.1 | ||
| powerSupplyStatusChange | |||
| TRAP-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dellVoltageProbeEvSys | |||
| dellVoltageProbeEvSub | |||
| dellVoltageProbeEvSol | |||
| dellVoltageProbeState | 1.3.6.1.4.1.674.10891.302.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| voltParentIndexAtt1 | 1.3.6.1.4.1.674.10891.302.1.1 | ||
| The chassis this voltage probe is connected to. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| voltIndexAtt2 | 1.3.6.1.4.1.674.10891.302.1.2 | ||
| the index of the voltage probe within the chassis. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| voltTypeAtt3 | 1.3.6.1.4.1.674.10891.302.1.3 | ||
| The type of voltage probe | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), v33(3), v33-1(4), v5(5), v5-1(6), v12(7), v12-1(8), v15(9), core(10) | ||
| voltStatusAtt4 | 1.3.6.1.4.1.674.10891.302.1.4 | ||
| Status of the voltage probe. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), oK(3), nonCritical(4), critical(5), nonRecoverable(6) | ||
| voltReadingAtt5 | 1.3.6.1.4.1.674.10891.302.1.5 | ||
| Current reading of the voltage probe, in millivolts. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| voltMinWarnAtt6 | 1.3.6.1.4.1.674.10891.302.1.6 | ||
| lower warning threshold value for this voltage probe. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| voltMaxWarnAtt7 | 1.3.6.1.4.1.674.10891.302.1.7 | ||
| upper warning threshold value for this voltage probe. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| voltMinFailAtt8 | 1.3.6.1.4.1.674.10891.302.1.8 | ||
| lower failure threshold value for this voltage probe. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| voltMaxFailAtt9 | 1.3.6.1.4.1.674.10891.302.1.9 | ||
| upper failure threshold value for this voltage probe. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| voltLocationAtt10 | 1.3.6.1.4.1.674.10891.302.1.10 | ||
| the location of this voltage probe within the system. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| dellVoltageProbeEvSys | 1.3.6.1.4.1.674.10891.302.6 | ||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dellVoltageProbeEvSub | 1.3.6.1.4.1.674.10891.302.7 | ||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dellVoltageProbeEvSol | 1.3.6.1.4.1.674.10891.302.8 | ||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2) | ||
| dellCurrentProbeTable | 1.3.6.1.4.1.674.10891.303 | ||
| The Current group contains the data on all the Current probes in a system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdellCurrentProbe | |||
| dellCurrentProbeEntry | 1.3.6.1.4.1.674.10891.303.1 | ||
| The Current group contains the data on all the Current probes in a system. | |||
| OBJECT-TYPE | |||
| SdellCurrentProbe | |||
| dellCurrentProbeEvt1 | 1.3.6.1.4.1.674.10891.303.1 | ||
| powerSupplyStatusChange | |||
| TRAP-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dellCurrentProbeEvSys | |||
| dellCurrentProbeEvSub | |||
| dellCurrentProbeEvSol | |||
| dellCurrentProbeState | 1.3.6.1.4.1.674.10891.303.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| ampParentIndexAtt1 | 1.3.6.1.4.1.674.10891.303.1.1 | ||
| The chassis this current probe is connected to. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| ampIndexAtt2 | 1.3.6.1.4.1.674.10891.303.1.2 | ||
| the index of the current probe within the chassis. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| ampTypeAtt3 | 1.3.6.1.4.1.674.10891.303.1.3 | ||
| The type of current probe | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), v33(3), v33(4), v5(5), v5(6), v12(7), v12(8) | ||
| ampStatusAtt4 | 1.3.6.1.4.1.674.10891.303.1.4 | ||
| Status of the current probe. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), oK(3), nonCritical(4), critical(5), nonRecoverable(6) | ||
| ampReadingAtt5 | 1.3.6.1.4.1.674.10891.303.1.5 | ||
| Current reading of the current probe in milliamps. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| ampMinWarnAtt6 | 1.3.6.1.4.1.674.10891.303.1.6 | ||
| lower warning threshold value for this current probe. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| ampMaxWarnAtt7 | 1.3.6.1.4.1.674.10891.303.1.7 | ||
| upper warning threshold value for this current probe. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| ampMinFailAtt8 | 1.3.6.1.4.1.674.10891.303.1.8 | ||
| lower failure threshold value for this current probe. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| ampMaxFailAtt9 | 1.3.6.1.4.1.674.10891.303.1.9 | ||
| upper failure threshold value for this current probe. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| ampLocationAtt10 | 1.3.6.1.4.1.674.10891.303.1.10 | ||
| the location of this current probe within the system. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| dellCurrentProbeEvSys | 1.3.6.1.4.1.674.10891.303.6 | ||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dellCurrentProbeEvSub | 1.3.6.1.4.1.674.10891.303.7 | ||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dellCurrentProbeEvSol | 1.3.6.1.4.1.674.10891.303.8 | ||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2) | ||
| dellRedundantPowerSupplyTable | 1.3.6.1.4.1.674.10891.304 | ||
| The Power Supply group contains the data on all the redundant power supplies in a system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdellRedundantPowerSupply | |||
| dellRedundantPowerSupplyEntry | 1.3.6.1.4.1.674.10891.304.1 | ||
| The Power Supply group contains the data on all the redundant power supplies in a system. | |||
| OBJECT-TYPE | |||
| SdellRedundantPowerSupply | |||
| dellRedundantPowerSupplyState | 1.3.6.1.4.1.674.10891.304.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| pwrSupplyParentIndexAtt1 | 1.3.6.1.4.1.674.10891.304.1.1 | ||
| The chassis this power supply is connected to. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| pwrSupplyIndexAtt2 | 1.3.6.1.4.1.674.10891.304.1.2 | ||
| The index within the chassis of this power supply. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| pwrSupplyTypeAtt3 | 1.3.6.1.4.1.674.10891.304.1.3 | ||
| The type of power supply. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), pSPB(3), x230W(4), x500W(5), x700W(6), x320W(7), x275W(8) | ||
| pwrSupplyStatusAtt4 | 1.3.6.1.4.1.674.10891.304.1.4 | ||
| The current status of this power supply. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), oK(3), nonCritical(4), critical(5), nonRecoverable(6) | ||
| pwrSupplyOnlineAtt5 | 1.3.6.1.4.1.674.10891.304.1.5 | ||
| The current online status of this power supply. Setting this value to FALSE will turn off the power supply, setting it to TRUE will turn on the power supply. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| pwrLocationAtt6 | 1.3.6.1.4.1.674.10891.304.1.6 | ||
| the location of this power supply within the system. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| dellGlobalPowerUnitTable | 1.3.6.1.4.1.674.10891.305 | ||
| This group contains the global status for the power supplies in the system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdellGlobalPowerUnit | |||
| dellGlobalPowerUnitEntry | 1.3.6.1.4.1.674.10891.305.1 | ||
| This group contains the global status for the power supplies in the system. | |||
| OBJECT-TYPE | |||
| SdellGlobalPowerUnit | |||
| dellGlobalPowerUnitEvt1 | 1.3.6.1.4.1.674.10891.305.1 | ||
| powerSupplyRedundancyChange | |||
| TRAP-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dellGlobalPowerUnitEvSys | |||
| dellGlobalPowerUnitEvSub | |||
| dellGlobalPowerUnitEvSol | |||
| dellGlobalPowerUnitState | 1.3.6.1.4.1.674.10891.305.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| pwrUnitStatusAtt1 | 1.3.6.1.4.1.674.10891.305.1.1 | ||
| The current redundancy status of the power unit. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), notApplicableUnitNotRedundant(3), offline(4), fullyRedundant(5), degradedRedundancy(6), redundancyLost(7) | ||
| pwrUnitGlobalLevelAtt2 | 1.3.6.1.4.1.674.10891.305.1.2 | ||
| The current global power level usage, in percent. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| pwrUnitGlobalMaxWarnAtt3 | 1.3.6.1.4.1.674.10891.305.1.3 | ||
| Warning threshold, in percent | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| pwrUnitLevel33vAtt4 | 1.3.6.1.4.1.674.10891.305.1.4 | ||
| The current 3.3v power level usage, in percent. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| pwrUnitMaxWarn33vAtt5 | 1.3.6.1.4.1.674.10891.305.1.5 | ||
| Warning threshold, in percent | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| pwrUnitLevel5vAtt6 | 1.3.6.1.4.1.674.10891.305.1.6 | ||
| The current 5v power level usage, in percent. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| pwrUnitMaxWarn5vAtt7 | 1.3.6.1.4.1.674.10891.305.1.7 | ||
| Warning threshold, in percent | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| pwrUnitLevel12vAtt8 | 1.3.6.1.4.1.674.10891.305.1.8 | ||
| The current 12v power level usage, in percent. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| pwrUnitMaxWarn12vAtt9 | 1.3.6.1.4.1.674.10891.305.1.9 | ||
| Warning threshold, in percent | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| pwrUnitUidAtt10 | 1.3.6.1.4.1.674.10891.305.1.10 | ||
| The unique ID for this power supply unit. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| pwrUnitIndexAtt11 | 1.3.6.1.4.1.674.10891.305.1.11 | ||
| The index into the power supply unit table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dellGlobalPowerUnitEvt2 | 1.3.6.1.4.1.674.10891.305.2 | ||
| powerSupplyStatusChange | |||
| TRAP-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dellGlobalPowerUnitEvSys | |||
| dellGlobalPowerUnitEvSub | |||
| dellGlobalPowerUnitEvSol | |||
| dellGlobalPowerUnitEvSys | 1.3.6.1.4.1.674.10891.305.6 | ||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dellGlobalPowerUnitEvSub | 1.3.6.1.4.1.674.10891.305.7 | ||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dellGlobalPowerUnitEvSol | 1.3.6.1.4.1.674.10891.305.8 | ||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2) | ||
| dellSystemChassisExtensionTable | 1.3.6.1.4.1.674.10891.306 | ||
| Global status of devices in chassis. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdellSystemChassisExtension | |||
| dellSystemChassisExtensionEntry | 1.3.6.1.4.1.674.10891.306.1 | ||
| Global status of devices in chassis. | |||
| OBJECT-TYPE | |||
| SdellSystemChassisExtension | |||
| dellSystemChassisExtensionState | 1.3.6.1.4.1.674.10891.306.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| chassIndexAtt1 | 1.3.6.1.4.1.674.10891.306.1.1 | ||
| Physical container index | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| chassGlobStatusAtt2 | 1.3.6.1.4.1.674.10891.306.1.2 | ||
| Global status of all devices in chassis. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), oK(3), nonCritical(4), critical(5), nonRecoverable(6) | ||
| chassTempStatusAtt3 | 1.3.6.1.4.1.674.10891.306.1.3 | ||
| Global status of temperature probes. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), oK(3), nonCritical(4), critical(5), nonRecoverable(6) | ||
| chassTempProbesAtt4 | 1.3.6.1.4.1.674.10891.306.1.4 | ||
| This contains the statuses of all temp probes in the system, one probe per octet. The value of each octet is the value of the status field. | |||
| OBJECT-TYPE | |||
| DmiOctetstring | |||
| chassFansStatusAtt5 | 1.3.6.1.4.1.674.10891.306.1.5 | ||
| Global status of fan sensors. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), oK(3), nonCritical(4), critical(5), nonRecoverable(6) | ||
| chassFansProbesAtt6 | 1.3.6.1.4.1.674.10891.306.1.6 | ||
| This contains the statuses of all fan probes in the system, one probe per octet. The value of each octet is the value of the status field. | |||
| OBJECT-TYPE | |||
| DmiOctetstring | |||
| chassVoltStatusAtt7 | 1.3.6.1.4.1.674.10891.306.1.7 | ||
| Global status of voltage probes. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), oK(3), nonCritical(4), critical(5), nonRecoverable(6) | ||
| chassVoltProbesAtt8 | 1.3.6.1.4.1.674.10891.306.1.8 | ||
| This contains the statuses of all volt probes in the system, one probe per octet. The value of each octet is the value of the status field. | |||
| OBJECT-TYPE | |||
| DmiOctetstring | |||
| chassAmpStatusAtt9 | 1.3.6.1.4.1.674.10891.306.1.9 | ||
| Global status of current probes. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), oK(3), nonCritical(4), critical(5), nonRecoverable(6) | ||
| chassAmpProbesAtt10 | 1.3.6.1.4.1.674.10891.306.1.10 | ||
| This contains the statuses of all amp probes in the system, one probe per octet. The value of each octet is the value of the status field. | |||
| OBJECT-TYPE | |||
| DmiOctetstring | |||
| chassPsStatusAtt11 | 1.3.6.1.4.1.674.10891.306.1.11 | ||
| Global status of power supplies. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), oK(3), nonCritical(4), critical(5), nonRecoverable(6) | ||
| chassPwrSuppliesAtt12 | 1.3.6.1.4.1.674.10891.306.1.12 | ||
| This contains the statuses of all power supplies in the system, one probe per octet. The value of each octet is the value of the status field. | |||
| OBJECT-TYPE | |||
| DmiOctetstring | |||
| chassServiceTagAtt13 | 1.3.6.1.4.1.674.10891.306.1.13 | ||
| This is the service tag for this chassis, if it exists. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| chassUidAtt14 | 1.3.6.1.4.1.674.10891.306.1.14 | ||
| This is the Unique ID for this chassis, if it exists. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| chassBackPlaneUidAtt15 | 1.3.6.1.4.1.674.10891.306.1.15 | ||
| This is the Unique ID for the backplane in this chassis. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| chassIdentifyAtt16 | 1.3.6.1.4.1.674.10891.306.1.16 | ||
| This attribute is used to visually identify a disk pod or other chassis by causing its lights to flash. Setting this value to non-zero turns on the identify, setting it back to zero turns it off. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| chassFanControlAtt17 | 1.3.6.1.4.1.674.10891.306.1.17 | ||
| This attribute is used to control the fan speed in a chassis. If the value is 0, then fan control is notavailable. A value of 2 indicates maximum cooling. Avalue of 1 indicates minimize fan noise (and speed). | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| chassLEDConfigAtt18 | 1.3.6.1.4.1.674.10891.306.1.18 | ||
| This attribute is used to configure which fault conditionscause the fault LED to flash. If the value is 0, thenthis feature is not available. A value of 16 indicatesflash for failure conditions. A value of 8 indicatesfla h for failure and warning conditions. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| chassFaultClearAtt19 | 1.3.6.1.4.1.674.10891.306.1.19 | ||
| This attribute is used to clear the hard drive fault LED.If this value is non-zero, then it is available. Writingany value to this attribut will clear the hard drive faultLED. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| chassThermalShutdownAtt20 | 1.3.6.1.4.1.674.10891.306.1.20 | ||
| This attribute is used to enable thermal shutdown of a chassis. If the value is -1, then thermal shutdown is notenabled. A value of 5 will shutdown on failures, a value of 4will shutdown on failures and warnings. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| chassMemStatusAtt21 | 1.3.6.1.4.1.674.10891.306.1.21 | ||
| Global status of Memory Devices. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), oK(3), nonCritical(4), critical(5), nonRecoverable(6) | ||
| chassMemDevicesAtt22 | 1.3.6.1.4.1.674.10891.306.1.22 | ||
| This contains the statuses of all memory devices in the system, one device per octet. The value of each octet is the value of the status field. | |||
| OBJECT-TYPE | |||
| DmiOctetstring | |||
| dellSystemChassisExtensionEvSys | 1.3.6.1.4.1.674.10891.306.6 | ||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dellSystemChassisExtensionEvSub | 1.3.6.1.4.1.674.10891.306.7 | ||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dellSystemChassisExtensionEvSol | 1.3.6.1.4.1.674.10891.306.8 | ||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2) | ||
| dellEsmLogTable | 1.3.6.1.4.1.674.10891.307 | ||
| ESM Event Log. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdellEsmLog | |||
| dellEsmLogEntry | 1.3.6.1.4.1.674.10891.307.1 | ||
| ESM Event Log. | |||
| OBJECT-TYPE | |||
| SdellEsmLog | |||
| dellEsmLogState | 1.3.6.1.4.1.674.10891.307.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| esmLogIndexAtt1 | 1.3.6.1.4.1.674.10891.307.1.1 | ||
| KEY: The index to this log. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| esmLogDataAtt2 | 1.3.6.1.4.1.674.10891.307.1.2 | ||
| The event log data for the ESM. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| dellPOSTLogTable | 1.3.6.1.4.1.674.10891.308 | ||
| POST Codes Event Log. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdellPOSTLog | |||
| dellPOSTLogEntry | 1.3.6.1.4.1.674.10891.308.1 | ||
| POST Codes Event Log. | |||
| OBJECT-TYPE | |||
| SdellPOSTLog | |||
| dellPOSTLogState | 1.3.6.1.4.1.674.10891.308.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| postLogIndexAtt1 | 1.3.6.1.4.1.674.10891.308.1.1 | ||
| KEY: The index into the post log. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| postLogDataAtt2 | 1.3.6.1.4.1.674.10891.308.1.2 | ||
| The event log data. | |||
| OBJECT-TYPE | |||
| DmiOctetstring | |||
| dellSecurityTable | 1.3.6.1.4.1.674.10891.309 | ||
| Security Group - contains user database: Used by both DSA and Baseboard components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdellSecurity | |||
| dellSecurityEntry | 1.3.6.1.4.1.674.10891.309.1 | ||
| Security Group - contains user database: Used by both DSA and Baseboard components. | |||
| OBJECT-TYPE | |||
| SdellSecurity | |||
| dellSecurityState | 1.3.6.1.4.1.674.10891.309.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| userIndexAtt1 | 1.3.6.1.4.1.674.10891.309.1.1 | ||
| Keyed ID for this group. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| userNameAtt2 | 1.3.6.1.4.1.674.10891.309.1.2 | ||
| User name. First user name is 'create', allows creation. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| userControlAtt3 | 1.3.6.1.4.1.674.10891.309.1.3 | ||
| User control. Used for creating/deleting/editing users. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| requestAtt4 | 1.3.6.1.4.1.674.10891.309.1.4 | ||
| Request field used for sets. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| dellDialupTable | 1.3.6.1.4.1.674.10891.310 | ||
| Dialup Control - contains information used by the ESM dialup interface. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdellDialup | |||
| dellDialupEntry | 1.3.6.1.4.1.674.10891.310.1 | ||
| Dialup Control - contains information used by the ESM dialup interface. | |||
| OBJECT-TYPE | |||
| SdellDialup | |||
| dialupCapabilityAtt1 | 1.3.6.1.4.1.674.10891.310.1.1 | ||
| Specifies if this system supports dialup. | |||
| OBJECT-TYPE | |||
| INTEGER | false(0), true(1) | ||
| callbackNumberAtt2 | 1.3.6.1.4.1.674.10891.310.1.2 | ||
| The number to callback when a dialup connection is established. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| dellFirmwareTable | 1.3.6.1.4.1.674.10891.311 | ||
| Firmware Information - Contains version/status of firmware. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdellFirmware | |||
| dellFirmwareEntry | 1.3.6.1.4.1.674.10891.311.1 | ||
| Firmware Information - Contains version/status of firmware. | |||
| OBJECT-TYPE | |||
| SdellFirmware | |||
| dellFirmwareState | 1.3.6.1.4.1.674.10891.311.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| firmwareChassisIndexAtt1 | 1.3.6.1.4.1.674.10891.311.1.1 | ||
| Firmware chassis index | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| firmwareIndexAtt2 | 1.3.6.1.4.1.674.10891.311.1.2 | ||
| Index into the firmware information table | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| firmwareTypeAtt3 | 1.3.6.1.4.1.674.10891.311.1.3 | ||
| The type of this firmware. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), bIOS(3), eSM(4), pSPB(5), backplane(6) | ||
| firmwareVersionAtt4 | 1.3.6.1.4.1.674.10891.311.1.4 | ||
| Version level of this firmware | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| firmwareStatusAtt5 | 1.3.6.1.4.1.674.10891.311.1.5 | ||
| Current status of this firmware, if applicable | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), oK(3), nonCritical(4), critical(5), nonRecoverable(6) | ||
| dellSystemResetTable | 1.3.6.1.4.1.674.10891.312 | ||
| This group defines whether System Control functions are availabl and enabled. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdellSystemReset | |||
| dellSystemResetEntry | 1.3.6.1.4.1.674.10891.312.1 | ||
| This group defines whether System Control functions are availabl and enabled. | |||
| OBJECT-TYPE | |||
| SdellSystemReset | |||
| dellSystemResetEvt1 | 1.3.6.1.4.1.674.10891.312.1 | ||
| systemUp | |||
| TRAP-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dellSystemResetEvSys | |||
| dellSystemResetEvSub | |||
| dellSystemResetEvSol | |||
| automaticCapabilitiesAtt1 | 1.3.6.1.4.1.674.10891.312.1.1 | ||
| Indicates which Automatic Capabilities are available for the current operating system. Encoding is as follows: 0x1 = Supports Reboot 0x2 = Supports Power Cycle 0x4 = Supports Notification 0x8 = Supports Configurable Timer If value is nonzero, Watchdog is supported. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| automaticSettingsAtt2 | 1.3.6.1.4.1.674.10891.312.1.2 | ||
| Indicates which Automatic Settings are enabled by the user. Encoding is as follows: 0x1 = Enabled w/ Reboot 0x2 = Enabled w/ Power Cycle 0x4 = Enabled w/ Notification If value is nonzero, Watchdog is Enabled. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| notificationNumberAtt3 | 1.3.6.1.4.1.674.10891.312.1.3 | ||
| The number to dial when the watchdog timer elapses. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| manualCapabilitiesAtt4 | 1.3.6.1.4.1.674.10891.312.1.4 | ||
| Describes which system reset actions may occur.Bit encodings: 0x1 = Reboot 0x2 = Power Off 0x4 = Power Cycle 0x8 = Shutdown OS | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| manualControlAtt5 | 1.3.6.1.4.1.674.10891.312.1.5 | ||
| Setting this value will immediately perform one of the following functions. Encoding as follows: Bit encoding: 0x1 = Reboot 0x2 = Power Off 0x4 = Power Cycle 0x8 = Shutdown OS | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| automaticSystemResetTimerAtt6 | 1.3.6.1.4.1.674.10891.312.1.6 | ||
| Automatic System Reset Timer in seconds. Minimum value is 20 seconds. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| dellSystemResetEvSys | 1.3.6.1.4.1.674.10891.312.6 | ||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dellSystemResetEvSub | 1.3.6.1.4.1.674.10891.312.7 | ||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dellSystemResetEvSol | 1.3.6.1.4.1.674.10891.312.8 | ||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2) | ||
| dELLSystemsManagementSoftwareTable | 1.3.6.1.4.1.674.10891.400 | ||
| This group defines the attributes of the management software which instruments this component. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdELLSystemsManagementSoftware | |||
| dELLSystemsManagementSoftwareEntry | 1.3.6.1.4.1.674.10891.400.1 | ||
| This group defines the attributes of the management software which instruments this component. | |||
| OBJECT-TYPE | |||
| SdELLSystemsManagementSoftware | |||
| productAtt1 | 1.3.6.1.4.1.674.10891.400.1.1 | ||
| The name of the Systems Management Software product that instruments this component. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| versionAtt2 | 1.3.6.1.4.1.674.10891.400.1.2 | ||
| The version for the Systems Management Software. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| buildNumberAtt3 | 1.3.6.1.4.1.674.10891.400.1.3 | ||
| The build number of this Systems Management Software product. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| descriptionAtt4 | 1.3.6.1.4.1.674.10891.400.1.4 | ||
| A description of this Systems Management Software product. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| supportedProtocolsAtt5 | 1.3.6.1.4.1.674.10891.400.1.5 | ||
| This is a bit map field which is used to list protocols which can be used to access the systems management information. This is a bit map where a value of 1 indicates that the protocol is supported. Values are based on the Protocol-Type enum. Mappers will be listed in this list, but not as preferred protocols. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| preferredProtocolAtt6 | 1.3.6.1.4.1.674.10891.400.1.6 | ||
| This is a field which is used to indicate which protocol is the preferred method for gathering management information. This is value is set by the instrumentation based on performance and features of protocols available. | |||
| OBJECT-TYPE | |||
| INTEGER | sNMP(1), dMIRPC(2), cIMOM(4) | ||
| dMIRPCTypesAtt7 | 1.3.6.1.4.1.674.10891.400.1.7 | ||
| This field describes the RPC type, if any, for instance DCE:ncac -ip-tcp or ONC:tcpip. A semi-colon may seperate multiple supports, such as DCE:ncasn-ip-tcp;ONC:tcpip. This field should be empty if DMI RPC is not supported. | |||
| OBJECT-TYPE | |||
| DmiDisplaystring | |||
| dELLSystemsSummaryInformationTable | 1.3.6.1.4.1.674.10891.402 | ||
| This group provides minimal summarization information about a system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdELLSystemsSummaryInformation | |||
| dELLSystemsSummaryInformationEntry | 1.3.6.1.4.1.674.10891.402.1 | ||
| This group provides minimal summarization information about a system. | |||
| OBJECT-TYPE | |||
| SdELLSystemsSummaryInformation | |||
| operatingSystemAtt1 | 1.3.6.1.4.1.674.10891.402.1.1 | ||
| This is the operating system which is installed and running on the system. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), windowsNT(3), windows9x(4), iBMOS2(5), sCOUNIX(6), netware(7) | ||
| systemClassAtt2 | 1.3.6.1.4.1.674.10891.402.1.2 | ||
| This is the system type which is installed and running the instrumentation. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), workstation(3), server(4), desktop(5), portable(6), netPC(7) | ||
| dellMemoryPrefailureTable | 1.3.6.1.4.1.674.10891.403 | ||
| This group provides information about a memory prefailure condition described in the operational state of the memory device. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdellMemoryPrefailure | |||
| dellMemoryPrefailureEntry | 1.3.6.1.4.1.674.10891.403.1 | ||
| This group provides information about a memory prefailure condition described in the operational state of the memory device. | |||
| OBJECT-TYPE | |||
| SdellMemoryPrefailure | |||
| dellMemoryPrefailureState | 1.3.6.1.4.1.674.10891.403.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| memoryDeviceIndexAtt1 | 1.3.6.1.4.1.674.10891.403.1.1 | ||
| This is the index into the memory device table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| resetMemoryDeviceErrorCountAndPrefailureStatusAtt2 | 1.3.6.1.4.1.674.10891.403.1.2 | ||
| Writing a non-zero value to this field will reset the memory device prefailure status and error count. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| DmiCounter | |||
| Counter | |||
| DmiCounter64 | |||
| Counter64 | |||
| DmiGauge | |||
| Gauge | |||
| DmiInteger | |||
| INTEGER | |||
| DmiOctetstring | |||
| OCTET STRING | |||
| DmiDisplaystring | |||
| DisplayString | |||
| DmiCompId | |||
| INTEGER | |||
| DmiGroupId | |||
| INTEGER | |||
| SdMTFComponentID | |||
| SEQUENCE | |||
| DmiDisplaystring as manufacturerAtt1 | |||
| DmiDisplaystring as productAtt2 | |||
| DmiDisplaystring as versionAtt3 | |||
| DmiDisplaystring as serialNumberAtt4 | |||
| DmiDate as installationAtt5 | |||
| DmiInteger as verifyAtt6 | |||
| SdellTemperatureProbe | |||
| SEQUENCE | |||
| INTEGER as dellTemperatureProbeState | |||
| DmiInteger as tempParentIndexAtt1 | |||
| DmiInteger as tempIndexAtt2 | |||
| DmiInteger as tempTypeAtt3 | |||
| DmiInteger as tempStatusAtt4 | |||
| DmiInteger as tempReadingAtt5 | |||
| DmiDisplaystring as tempMinWarnAtt6 | |||
| DmiDisplaystring as tempMaxWarnAtt7 | |||
| DmiInteger as tempMinFailAtt8 | |||
| DmiInteger as tempMaxFailAtt9 | |||
| DmiDisplaystring as tempLocationAtt10 | |||
| SdellFanSensor | |||
| SEQUENCE | |||
| INTEGER as dellFanSensorState | |||
| DmiInteger as fansParentIndexAtt1 | |||
| DmiInteger as fansIndexAtt2 | |||
| DmiInteger as fansTypeAtt3 | |||
| DmiInteger as fansStatusAtt4 | |||
| DmiInteger as fansReadingAtt5 | |||
| DmiDisplaystring as fansWarningMinAtt6 | |||
| DmiDisplaystring as fansMaxWarnAtt7 | |||
| DmiInteger as fansMinFailAtt8 | |||
| DmiInteger as fansMaxFailAtt9 | |||
| DmiDisplaystring as fansLocationAtt10 | |||
| SdellVoltageProbe | |||
| SEQUENCE | |||
| INTEGER as dellVoltageProbeState | |||
| DmiInteger as voltParentIndexAtt1 | |||
| DmiInteger as voltIndexAtt2 | |||
| DmiInteger as voltTypeAtt3 | |||
| DmiInteger as voltStatusAtt4 | |||
| DmiInteger as voltReadingAtt5 | |||
| DmiDisplaystring as voltMinWarnAtt6 | |||
| DmiDisplaystring as voltMaxWarnAtt7 | |||
| DmiInteger as voltMinFailAtt8 | |||
| DmiInteger as voltMaxFailAtt9 | |||
| DmiDisplaystring as voltLocationAtt10 | |||
| SdellCurrentProbe | |||
| SEQUENCE | |||
| INTEGER as dellCurrentProbeState | |||
| DmiInteger as ampParentIndexAtt1 | |||
| DmiInteger as ampIndexAtt2 | |||
| DmiInteger as ampTypeAtt3 | |||
| DmiInteger as ampStatusAtt4 | |||
| DmiInteger as ampReadingAtt5 | |||
| DmiDisplaystring as ampMinWarnAtt6 | |||
| DmiDisplaystring as ampMaxWarnAtt7 | |||
| DmiInteger as ampMinFailAtt8 | |||
| DmiInteger as ampMaxFailAtt9 | |||
| DmiDisplaystring as ampLocationAtt10 | |||
| SdellRedundantPowerSupply | |||
| SEQUENCE | |||
| INTEGER as dellRedundantPowerSupplyState | |||
| DmiInteger as pwrSupplyParentIndexAtt1 | |||
| DmiInteger as pwrSupplyIndexAtt2 | |||
| DmiInteger as pwrSupplyTypeAtt3 | |||
| DmiInteger as pwrSupplyStatusAtt4 | |||
| DmiDisplaystring as pwrSupplyOnlineAtt5 | |||
| DmiDisplaystring as pwrLocationAtt6 | |||
| SdellGlobalPowerUnit | |||
| SEQUENCE | |||
| INTEGER as dellGlobalPowerUnitState | |||
| DmiInteger as pwrUnitStatusAtt1 | |||
| DmiInteger as pwrUnitGlobalLevelAtt2 | |||
| DmiDisplaystring as pwrUnitGlobalMaxWarnAtt3 | |||
| DmiInteger as pwrUnitLevel33vAtt4 | |||
| DmiDisplaystring as pwrUnitMaxWarn33vAtt5 | |||
| DmiInteger as pwrUnitLevel5vAtt6 | |||
| DmiDisplaystring as pwrUnitMaxWarn5vAtt7 | |||
| DmiInteger as pwrUnitLevel12vAtt8 | |||
| DmiDisplaystring as pwrUnitMaxWarn12vAtt9 | |||
| DmiDisplaystring as pwrUnitUidAtt10 | |||
| DmiInteger as pwrUnitIndexAtt11 | |||
| SdellSystemChassisExtension | |||
| SEQUENCE | |||
| INTEGER as dellSystemChassisExtensionState | |||
| DmiInteger as chassIndexAtt1 | |||
| DmiInteger as chassGlobStatusAtt2 | |||
| DmiInteger as chassTempStatusAtt3 | |||
| DmiOctetstring as chassTempProbesAtt4 | |||
| DmiInteger as chassFansStatusAtt5 | |||
| DmiOctetstring as chassFansProbesAtt6 | |||
| DmiInteger as chassVoltStatusAtt7 | |||
| DmiOctetstring as chassVoltProbesAtt8 | |||
| DmiInteger as chassAmpStatusAtt9 | |||
| DmiOctetstring as chassAmpProbesAtt10 | |||
| DmiInteger as chassPsStatusAtt11 | |||
| DmiOctetstring as chassPwrSuppliesAtt12 | |||
| DmiDisplaystring as chassServiceTagAtt13 | |||
| DmiDisplaystring as chassUidAtt14 | |||
| DmiDisplaystring as chassBackPlaneUidAtt15 | |||
| DmiDisplaystring as chassIdentifyAtt16 | |||
| DmiDisplaystring as chassFanControlAtt17 | |||
| DmiDisplaystring as chassLEDConfigAtt18 | |||
| DmiDisplaystring as chassFaultClearAtt19 | |||
| DmiDisplaystring as chassThermalShutdownAtt20 | |||
| DmiInteger as chassMemStatusAtt21 | |||
| DmiOctetstring as chassMemDevicesAtt22 | |||
| SdMTFPhysicalContainerGlobalTable | |||
| SEQUENCE | |||
| INTEGER as dMTFPhysicalContainerGlobalTableState | |||
| DmiInteger as containerOrChassisTypeAtt1 | |||
| DmiDisplaystring as assetTagAtt2 | |||
| DmiInteger as chassisLockPresentAtt3 | |||
| DmiInteger as bootupStateAtt4 | |||
| DmiInteger as powerStateAtt5 | |||
| DmiInteger as thermalStateAtt6 | |||
| DmiInteger as fRUGroupIndexAtt7 | |||
| DmiInteger as operationalGroupIndexAtt8 | |||
| DmiInteger as containerIndexAtt9 | |||
| DmiDisplaystring as containerNameAtt10 | |||
| DmiDisplaystring as containerLocationAtt11 | |||
| DmiInteger as containerSecurityStatusAtt12 | |||
| SdellSystemReset | |||
| SEQUENCE | |||
| DmiInteger as automaticCapabilitiesAtt1 | |||
| DmiDisplaystring as automaticSettingsAtt2 | |||
| DmiDisplaystring as notificationNumberAtt3 | |||
| DmiInteger as manualCapabilitiesAtt4 | |||
| DmiDisplaystring as manualControlAtt5 | |||
| DmiDisplaystring as automaticSystemResetTimerAtt6 | |||
| SdellEsmLog | |||
| SEQUENCE | |||
| INTEGER as dellEsmLogState | |||
| DmiInteger as esmLogIndexAtt1 | |||
| DmiDisplaystring as esmLogDataAtt2 | |||
| SdellPOSTLog | |||
| SEQUENCE | |||
| INTEGER as dellPOSTLogState | |||
| DmiInteger as postLogIndexAtt1 | |||
| DmiOctetstring as postLogDataAtt2 | |||
| SdellSecurity | |||
| SEQUENCE | |||
| INTEGER as dellSecurityState | |||
| DmiInteger as userIndexAtt1 | |||
| DmiDisplaystring as userNameAtt2 | |||
| DmiDisplaystring as userControlAtt3 | |||
| DmiDisplaystring as requestAtt4 | |||
| SdellDialup | |||
| SEQUENCE | |||
| DmiInteger as dialupCapabilityAtt1 | |||
| DmiDisplaystring as callbackNumberAtt2 | |||
| SdellFirmware | |||
| SEQUENCE | |||
| INTEGER as dellFirmwareState | |||
| DmiInteger as firmwareChassisIndexAtt1 | |||
| DmiInteger as firmwareIndexAtt2 | |||
| DmiInteger as firmwareTypeAtt3 | |||
| DmiDisplaystring as firmwareVersionAtt4 | |||
| DmiInteger as firmwareStatusAtt5 | |||
| SdMTFCoolingDevice | |||
| SEQUENCE | |||
| INTEGER as dMTFCoolingDeviceState | |||
| DmiInteger as coolingDeviceTableIndexAtt1 | |||
| DmiInteger as fRUGroupIndexAtt2 | |||
| DmiInteger as operationalGroupIndexAtt3 | |||
| DmiInteger as coolingUnitIndexAtt4 | |||
| DmiInteger as coolingDeviceTypeAtt5 | |||
| DmiInteger as temperatureProbeIndexAtt6 | |||
| SdMTFElectricalCurrentProbe | |||
| SEQUENCE | |||
| INTEGER as dMTFElectricalCurrentProbeState | |||
| DmiInteger as electricalCurrentProbeTableIndexAtt1 | |||
| DmiInteger as electricalCurrentProbeLocationAtt2 | |||
| DmiDisplaystring as electricalCurrentProbeDescriptionAtt3 | |||
| DmiInteger as electricalCurrentStatusAtt4 | |||
| DmiInteger as electricalCurrentProbeReadingAtt5 | |||
| DmiInteger as monitoredElectricalCurrentNominalReadingAtt6 | |||
| DmiInteger as monitoredElectricalCurrentNormalMaximumAtt7 | |||
| DmiInteger as monitoredElectricalCurrentNormalMinimumAtt8 | |||
| DmiInteger as electricalCurrentProbeMaximumAtt9 | |||
| DmiInteger as electricalCurrentProbeMinimumAtt10 | |||
| DmiInteger as electricalCurrentReadingLowerThresholdNonCriticalAtt11 | |||
| DmiInteger as electricalCurrentReadingUpperThresholdNonCriticalAtt12 | |||
| DmiInteger as electricalCurrentReadingLowerThresholdCriticalAtt13 | |||
| DmiInteger as currentReadingUpperThresholdCriticalAtt14 | |||
| DmiInteger as electricalCurrentReadingLowerThresholdNonRecoverabAtt15 | |||
| DmiInteger as electricalCurrentReadingUpperThresholdNonRecoverabAtt16 | |||
| DmiInteger as electricalCurrentProbeResolutionAtt17 | |||
| DmiInteger as electricalCurrentProbeToleranceAtt18 | |||
| DmiInteger as electricalCurrentProbeAccuracyAtt19 | |||
| DmiInteger as fRUGroupIndex-1Att20 | |||
| DmiInteger as operationalGroupIndex-1Att21 | |||
| SdMTFFRU | |||
| SEQUENCE | |||
| INTEGER as dMTFFRUState | |||
| DmiInteger as fRUIndexAtt1 | |||
| DmiInteger as deviceGroupIndexAtt2 | |||
| DmiDisplaystring as descriptionAtt3 | |||
| DmiDisplaystring as manufacturerAtt4 | |||
| DmiDisplaystring as modelAtt5 | |||
| DmiDisplaystring as partNumberAtt6 | |||
| DmiDisplaystring as fRUSerialNumberAtt7 | |||
| DmiDisplaystring as revisionLevelAtt8 | |||
| DmiDate as warrantyStartDateAtt9 | |||
| DmiInteger as warrantyDurationAtt10 | |||
| DmiDisplaystring as supportPhoneNumberAtt11 | |||
| DmiDisplaystring as fRUInternetUniformResourceLocatorAtt12 | |||
| SdMTFGeneralInformation | |||
| SEQUENCE | |||
| DmiDisplaystring as systemNameAtt1 | |||
| DmiDisplaystring as systemLocationAtt2 | |||
| DmiDisplaystring as systemPrimaryUserNameAtt3 | |||
| DmiDisplaystring as systemPrimaryUserPhoneAtt4 | |||
| DmiDate as systemBootupTimeAtt5 | |||
| DmiDate as systemDateTimeAtt6 | |||
| SdMTFMemoryArrayMappedAddresses | |||
| SEQUENCE | |||
| INTEGER as dMTFMemoryArrayMappedAddressesState | |||
| DmiInteger as memoryArrayMappedAddressesTableIndexAtt1 | |||
| DmiInteger as memoryArrayIndexAtt2 | |||
| DmiInteger as mappedRangeStartingAddressAtt3 | |||
| DmiInteger as mappedRangeEndingAddressAtt4 | |||
| DmiInteger as partitionIDAtt5 | |||
| DmiInteger as partitionWidthAtt6 | |||
| DmiInteger as operationalGroupIndexAtt7 | |||
| SdMTFMemoryDeviceMappedAddresses | |||
| SEQUENCE | |||
| INTEGER as dMTFMemoryDeviceMappedAddressesState | |||
| DmiInteger as memoryDeviceMappedAddressesTableIndexAtt1 | |||
| DmiInteger as memoryDeviceSetIDAtt2 | |||
| DmiInteger as partitionAtt3 | |||
| DmiInteger as mappedRangeStartingAddressAtt4 | |||
| DmiInteger as mappedRangeEndingAddressAtt5 | |||
| DmiInteger as partitionRowPositionAtt6 | |||
| DmiInteger as interleavePositionAtt7 | |||
| DmiInteger as dataDepthAtt8 | |||
| SdMTFMemoryDevice | |||
| SEQUENCE | |||
| INTEGER as dMTFMemoryDeviceState | |||
| DmiInteger as memoryDeviceTableIndexAtt1 | |||
| DmiInteger as memoryArrayIndexAtt2-1 | |||
| DmiDisplaystring as deviceLocatorAtt3 | |||
| DmiDisplaystring as bankLocatorAtt4 | |||
| DmiInteger as sizeAtt5 | |||
| DmiInteger as formFactorAtt6 | |||
| DmiInteger as totalWidthAtt7 | |||
| DmiInteger as dataWidthAtt8 | |||
| DmiInteger as memoryTypeAtt9 | |||
| DmiInteger as typeDetailAtt10 | |||
| DmiInteger as deviceSetAtt11 | |||
| DmiInteger as deviceErrorTypeAtt12 | |||
| DmiInteger as errorGranularityAtt13 | |||
| DmiInteger as lastErrorUpdateAtt14 | |||
| DmiInteger as errorOperationAtt15 | |||
| DmiInteger as errorDataSizeAtt16 | |||
| DmiOctetstring as errorDataAtt17 | |||
| DmiOctetstring as vendorSyndromeAtt18 | |||
| DmiInteger as deviceErrorAddressAtt19 | |||
| DmiInteger as arrayErrorAddressAtt20 | |||
| DmiInteger as errorResolutionAtt21 | |||
| DmiInteger as fRUGroupIndexAtt22 | |||
| DmiInteger as operationalGroupIndexAtt23 | |||
| SdMTFOperatingSystem | |||
| SEQUENCE | |||
| INTEGER as dMTFOperatingSystemState | |||
| DmiInteger as operatingSystemIndexAtt1 | |||
| DmiDisplaystring as operatingSystemNameAtt2 | |||
| DmiDisplaystring as operatingSystemVersionAtt3 | |||
| DmiInteger as primaryOperatingSystemAtt4 | |||
| DmiInteger as operatingSystemBootDeviceStorageTypeAtt5 | |||
| DmiInteger as operatingSystemBootDeviceIndexAtt6 | |||
| DmiInteger as operatingSystemBootPartitionIndexAtt7 | |||
| DmiDisplaystring as operatingSystemDescriptionAtt8 | |||
| SdMTFOperationalState | |||
| SEQUENCE | |||
| INTEGER as dMTFOperationalStateState | |||
| DmiInteger as operationalStateInstanceIndexAtt1 | |||
| DmiInteger as deviceGroupIndexAtt2-1 | |||
| DmiInteger as operationalStatusAtt3 | |||
| DmiInteger as usageStateAtt4 | |||
| DmiInteger as availabilityStatusAtt5 | |||
| DmiInteger as administrativeStateAtt6 | |||
| DmiCounter as fatalErrorCountAtt7 | |||
| DmiCounter as majorErrorCountAtt8 | |||
| DmiCounter as warningErrorCountAtt9 | |||
| DmiInteger as currentErrorStatusAtt10 | |||
| DmiInteger as devicePredictedFailureStatusAtt11 | |||
| SiNTELMIFTOMIB | |||
| SEQUENCE | |||
| DmiDisplaystring as dellBaseBoardMIBAtt1 | |||
| DmiDisplaystring as mIBOIDAtt2 | |||
| DmiInteger as disableTrapsAtt3 | |||
| SdMTFPowerSupply | |||
| SEQUENCE | |||
| INTEGER as dMTFPowerSupplyState | |||
| DmiInteger as powerSupplyIndexAtt1 | |||
| DmiInteger as fRUGroupIndexAtt2-1 | |||
| DmiInteger as operationalGroupIndexAtt3-1 | |||
| DmiInteger as powerUnitIndexAtt4 | |||
| DmiInteger as powerSupplyTypeAtt5 | |||
| DmiDisplaystring as inputVoltageCapabilityDescriptionAtt6 | |||
| DmiInteger as range1InputVoltageLowAtt7 | |||
| DmiInteger as range1InputVoltageHighAtt8 | |||
| DmiInteger as range1VoltageProbeIndexAtt9 | |||
| DmiInteger as range1ElectricalCurrentProbeIndexAtt10 | |||
| DmiInteger as range2InputVoltageLowAtt11 | |||
| DmiInteger as range2InputVoltageHighAtt12 | |||
| DmiInteger as range2VoltageProbeIndexAtt13 | |||
| DmiInteger as range2CurrentProbeIndexAtt14 | |||
| DmiInteger as activeInputVoltageRangeAtt15 | |||
| DmiInteger as inputVoltageRangeSwitchingAtt16 | |||
| DmiInteger as range1InputFrequencyLowAtt17 | |||
| DmiInteger as range1InputFrequencyHighAtt18 | |||
| DmiInteger as range2InputFrequencyLowAtt19 | |||
| DmiInteger as range2InputFrequencyHighAtt20 | |||
| DmiInteger as totalOutputPowerAtt21 | |||
| SdMTFPowerUnitGlobalTable | |||
| SEQUENCE | |||
| INTEGER as dMTFPowerUnitGlobalTableState | |||
| DmiInteger as powerUnitIndexAtt1 | |||
| DmiInteger as powerUnitRedundancyStatusAtt2 | |||
| SdMTFProcessor | |||
| SEQUENCE | |||
| INTEGER as dMTFProcessorState | |||
| DmiInteger as processorIndexAtt1 | |||
| DmiInteger as processorTypeAtt2 | |||
| DmiInteger as processorFamilyAtt3 | |||
| DmiDisplaystring as processorVersionInformationAtt4 | |||
| DmiInteger as maximumSpeedAtt5 | |||
| DmiInteger as currentSpeedAtt6 | |||
| DmiInteger as processorUpgradeAtt7 | |||
| DmiInteger as fRUGroupIndexAtt8 | |||
| DmiInteger as operationalGroupIndexAtt9 | |||
| DmiInteger as level1CacheIndexAtt10 | |||
| DmiInteger as level2CacheIndexAtt11 | |||
| DmiInteger as level3CacheIndexAtt12 | |||
| SdMTFSerialPorts | |||
| SEQUENCE | |||
| INTEGER as dMTFSerialPortsState | |||
| DmiInteger as serialPortIndexAtt1 | |||
| DmiInteger64 as serialBaseIOAddressAtt2 | |||
| DmiInteger as iRQUsedAtt3 | |||
| DmiDisplaystring as logicalNameAtt4 | |||
| DmiInteger as connectorTypeAtt5 | |||
| DmiInteger as maximumSpeedAtt6 | |||
| DmiInteger as serialPortCapabilitiesAtt7 | |||
| DmiInteger as operationalGroupIndexAtt8-1 | |||
| DmiInteger as serialPortSecuritySettingsAtt9 | |||
| SdMTFSystemBIOS | |||
| SEQUENCE | |||
| INTEGER as dMTFSystemBIOSState | |||
| DmiInteger as bIOSIndexAtt1 | |||
| DmiDisplaystring as bIOSManufacturerAtt2 | |||
| DmiDisplaystring as bIOSVersionAtt3 | |||
| DmiInteger as bIOSROMSizeAtt4 | |||
| DmiInteger64 as bIOSStartingAddressAtt5 | |||
| DmiInteger64 as bIOSEndingAddressAtt6 | |||
| DmiDisplaystring as bIOSLoaderVersionAtt7 | |||
| DmiDate as bIOSReleaseDateAtt8 | |||
| DmiInteger as primaryBIOSAtt9 | |||
| SdMTFSystemCache | |||
| SEQUENCE | |||
| INTEGER as dMTFSystemCacheState | |||
| DmiInteger as systemCacheIndexAtt1 | |||
| DmiInteger as systemCacheLevelAtt2 | |||
| DmiInteger as systemCacheSpeedAtt3 | |||
| DmiInteger as systemCacheSizeAtt4 | |||
| DmiInteger as systemCacheWritePolicyAtt5 | |||
| DmiInteger as systemCacheErrorCorrectionAtt6 | |||
| DmiInteger as fRUGroupIndexAtt7-1 | |||
| DmiInteger as operationalGroupIndexAtt8-2 | |||
| DmiInteger as systemCacheTypeAtt9 | |||
| DmiInteger as lineSizeAtt10 | |||
| DmiInteger as volatilityAtt11 | |||
| DmiInteger as replacementPolicyAtt12 | |||
| DmiInteger as readPolicyAtt13 | |||
| DmiInteger as flushTimerAtt14 | |||
| DmiInteger as associativityAtt15 | |||
| SdMTFSystemHardwareSecurity | |||
| SEQUENCE | |||
| DmiInteger as powerOnPasswordStatusAtt1 | |||
| DmiInteger as keyboardPasswordStatusAtt2 | |||
| DmiInteger as administratorPasswordStatisAtt3 | |||
| DmiInteger as frontPanelResetStatusAtt4 | |||
| SdMTFSystemPowerControls | |||
| SEQUENCE | |||
| DmiInteger as powerControlRequestAtt1 | |||
| DmiInteger as timedPowerOnAvailableAtt2 | |||
| DmiInteger as timeToNextScheduledPowerOnAtt3 | |||
| SdMTFSystemResourceDMAInfo | |||
| SEQUENCE | |||
| INTEGER as dMTFSystemResourceDMAInfoState | |||
| DmiInteger as systemResourceDMAInfoIndexAtt1 | |||
| DmiInteger as dMATransferWidthAtt2 | |||
| DmiInteger as dMAAddressSizeAtt3 | |||
| DmiInteger as dMAMaximumTransferSizeAtt4 | |||
| DmiInteger as dMATransferPreferenceAtt5 | |||
| DmiInteger as busMasterAtt6 | |||
| DmiInteger as byteModeAtt7 | |||
| DmiInteger as wordModeAtt8 | |||
| DmiInteger as channelTimingAtt9 | |||
| DmiInteger as typeCTimingAtt10 | |||
| SdMTFSystemResourceDeviceInfo | |||
| SEQUENCE | |||
| INTEGER as dMTFSystemResourceDeviceInfoState | |||
| DmiInteger as resourceUserAtt1 | |||
| DmiInteger as deviceIDAtt2 | |||
| DmiInteger as deviceSerialNumberAtt3 | |||
| DmiInteger as logicalDeviceIDClassCodeAtt4 | |||
| DmiInteger as deviceFlagsAtt5 | |||
| DmiInteger as deviceNumberAtt6 | |||
| DmiInteger as functionNumberAtt7 | |||
| DmiInteger as busTypeAtt8 | |||
| DmiInteger as cMReservedAtt9 | |||
| SdMTFSystemResourceIOInfo | |||
| SEQUENCE | |||
| INTEGER as dMTFSystemResourceIOInfoState | |||
| DmiInteger as systemResourceIOInfoIndexAtt1 | |||
| DmiInteger as iODecodeAtt2 | |||
| SdMTFSystemResourceIRQInfo | |||
| SEQUENCE | |||
| INTEGER as dMTFSystemResourceIRQInfoState | |||
| DmiInteger as systemResourceIRQInfoIndexAtt1 | |||
| DmiInteger as triggerTypeAtt2 | |||
| DmiInteger as triggerLevelAtt3 | |||
| SdMTFSystemResourceMemoryInfo | |||
| SEQUENCE | |||
| INTEGER as dMTFSystemResourceMemoryInfoState | |||
| DmiInteger as systemResourceMemoryInfoIndexAtt1 | |||
| DmiInteger as iSAPCMCIARangeDescriptorAtt2 | |||
| DmiInteger as eISARangeDescriptorAtt3 | |||
| DmiInteger as decodeSupportAtt4 | |||
| DmiInteger as cacheableAtt5 | |||
| DmiInteger as cacheTypeAtt6 | |||
| DmiInteger as readWriteAtt7 | |||
| SdMTFSystemResources2 | |||
| SEQUENCE | |||
| INTEGER as dMTFSystemResources2State | |||
| DmiInteger as systemResourcesIndexAtt1 | |||
| DmiInteger as resourceUserAtt2 | |||
| DmiInteger as resourceSetAtt3 | |||
| DmiInteger as resourceAssignmentAtt4 | |||
| DmiInteger as resourceTypeAtt5 | |||
| DmiInteger as resourceNumberAtt6 | |||
| DmiInteger as resourceInfoIDAtt7 | |||
| DmiInteger64 as startAddressAtt8 | |||
| DmiInteger64 as endAddressAtt9 | |||
| DmiInteger as resourceSizeAtt10 | |||
| DmiInteger as baseAlignmentAtt11 | |||
| DmiInteger as shareableAtt12 | |||
| DmiInteger as sharedAtt13 | |||
| SdMTFSystemSlots | |||
| SEQUENCE | |||
| INTEGER as dMTFSystemSlotsState | |||
| DmiInteger as slotIndexAtt1 | |||
| DmiInteger64 as slotTypeAtt2 | |||
| DmiInteger as slotWidthAtt3 | |||
| DmiInteger as currentUsageAtt4 | |||
| DmiDisplaystring as slotDescriptionAtt5 | |||
| DmiInteger as slotCategoryAtt6 | |||
| DmiInteger as virtualSlotAtt7 | |||
| DmiInteger as resourceUserIDAtt8 | |||
| SdMTFTemperatureProbe | |||
| SEQUENCE | |||
| INTEGER as dMTFTemperatureProbeState | |||
| DmiInteger as temperatureProbeTableIndexAtt1 | |||
| DmiInteger as temperatureProbeLocationAtt2 | |||
| DmiDisplaystring as temperatureProbeDescriptionAtt3 | |||
| DmiInteger as temperatureStatusAtt4 | |||
| DmiInteger as temperatureProbeTemperatureReadingAtt5 | |||
| DmiInteger as monitoredTemperatureNominalReadingAtt6 | |||
| DmiInteger as monitoredTemperatureNormalMaximumAtt7 | |||
| DmiInteger as monitoredTemperatureNormalMinimumAtt8 | |||
| DmiInteger as temperatureProbeMaximumAtt9 | |||
| DmiInteger as temperatureProbeMinimumAtt10 | |||
| DmiInteger as temperatureReadingLowerThresholdNonCriticalAtt11 | |||
| DmiInteger as temperatureReadingUpperThresholdNonCriticalAtt12 | |||
| DmiInteger as temperatureReadingLowerThresholdCriticalAtt13 | |||
| DmiInteger as temperatureReadingUpperThresholdCriticalAtt14 | |||
| DmiInteger as temperatureReadingLowerThresholdNonRecoverableAtt15 | |||
| DmiInteger as temperatureReadingUpperThresholdNonRecoverableAtt16 | |||
| DmiInteger as temperatureProbeResolutionAtt17 | |||
| DmiInteger as temperatureProbeToleranceAtt18 | |||
| DmiInteger as temperatureProbeAccuracyAtt19 | |||
| DmiInteger as fRUGroupIndexAtt20-1 | |||
| DmiInteger as operationalGroupIndexAtt21-1 | |||
| SdMTFVoltageProbe | |||
| SEQUENCE | |||
| INTEGER as dMTFVoltageProbeState | |||
| DmiInteger as voltageProbeIndexAtt1 | |||
| DmiInteger as voltageProbeLocationAtt2 | |||
| DmiDisplaystring as voltageProbeDescriptionAtt3 | |||
| DmiInteger as voltageStatusAtt4 | |||
| DmiInteger as voltageProbeVoltageLevelAtt5 | |||
| DmiInteger as monitoredVoltageNominalLevelAtt6 | |||
| DmiInteger as monitoredVoltageNormalMaximumAtt7 | |||
| DmiInteger as monitoredVoltageNormalMinimumAtt8 | |||
| DmiInteger as voltageProbeMaximumAtt9 | |||
| DmiInteger as voltageProbeMinimumAtt10 | |||
| DmiInteger as voltageLevelLowerThresholdNonCriticalAtt11 | |||
| DmiInteger as voltageLevelUpperThresholdNonCriticalAtt12 | |||
| DmiInteger as voltageLevelLowerThresholdCriticalAtt13 | |||
| DmiInteger as voltageLevelUpperThresholdCriticalAtt14 | |||
| DmiInteger as voltageLevelLowerThresholdNonRecoverableAtt15 | |||
| DmiInteger as voltageLevelUpperThresholdNonRecoverableAtt16 | |||
| DmiInteger as voltageProbeResolutionAtt17 | |||
| DmiInteger as voltageProbeToleranceAtt18 | |||
| DmiInteger as voltageProbeAccuracyAtt19 | |||
| DmiInteger as fRUGroupIndexAtt20-2 | |||
| DmiInteger as operationalGroupIndexAtt21-2 | |||
| SdMTFPhysicalMemoryArray | |||
| SEQUENCE | |||
| INTEGER as dMTFPhysicalMemoryArrayState | |||
| DmiInteger as memoryArrayTableIndexAtt1 | |||
| DmiInteger as memoryArrayLocationAtt2 | |||
| DmiInteger as memoryArrayUseAtt3 | |||
| DmiInteger as maximumMemoryCapacityAtt4 | |||
| DmiInteger as numberOfMemoryDeviceSocketsAtt5 | |||
| DmiInteger as numberOfMemoryDeviceSocketsUsedAtt6 | |||
| DmiInteger as memoryErrorCorrectionAtt7 | |||
| DmiInteger as arrayErrorTypeAtt8 | |||
| DmiInteger as lastErrorUpdateAtt9 | |||
| DmiInteger as errorOperationAtt10 | |||
| DmiInteger as errorDataSizeAtt11 | |||
| DmiOctetstring as errorDataAtt12 | |||
| DmiOctetstring as vendorSyndromeAtt13 | |||
| DmiInteger64 as errorAddressAtt14 | |||
| DmiInteger as errorResolutionAtt15 | |||
| DmiInteger as fRUGroupIndexAtt16 | |||
| DmiInteger as operationalGroupIndexAtt17 | |||
| SdMTFParallelPorts | |||
| SEQUENCE | |||
| INTEGER as dMTFParallelPortsState | |||
| DmiInteger as parallelPortIndexAtt1 | |||
| DmiInteger64 as parallelBaseIOAddressAtt2 | |||
| DmiInteger as iRQUsedAtt3-1 | |||
| DmiDisplaystring as logicalNameAtt4-1 | |||
| DmiInteger as connectorTypeAtt5-1 | |||
| DmiInteger as connectorPinoutAtt6 | |||
| DmiInteger as dMASupportAtt7 | |||
| DmiInteger as parallelPortCapabilitiesAtt8 | |||
| DmiInteger as operationalGroupIndexAtt9-1 | |||
| DmiInteger as parallelPortSecuritySettingsAtt10 | |||
| SdELLSystemsManagementSoftware | |||
| SEQUENCE | |||
| DmiDisplaystring as productAtt1 | |||
| DmiDisplaystring as versionAtt2 | |||
| DmiInteger as buildNumberAtt3 | |||
| DmiDisplaystring as descriptionAtt4 | |||
| DmiInteger as supportedProtocolsAtt5 | |||
| DmiInteger as preferredProtocolAtt6 | |||
| DmiDisplaystring as dMIRPCTypesAtt7 | |||
| SdELLSystemsSummaryInformation | |||
| SEQUENCE | |||
| DmiInteger as operatingSystemAtt1 | |||
| DmiInteger as systemClassAtt2 | |||
| SdellMemoryPrefailure | |||
| SEQUENCE | |||
| INTEGER as dellMemoryPrefailureState | |||
| DmiInteger as memoryDeviceIndexAtt1 | |||
| DmiInteger as resetMemoryDeviceErrorCountAndPrefailureStatusAtt2 | |||