BASIS-SERIAL-MIB

File: BASIS-SERIAL-MIB.mib (5718 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF BASIS-MIB
CISCOWAN-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
MODULE-COMPLIANCE OBJECT-GROUP basisLines
ciscoWan

Defined Objects

serialInterface 1.3.6.1.4.1.351.110.4.1
OBJECT IDENTIFIER    

serialInterfaceTable 1.3.6.1.4.1.351.110.4.1.1
This table represents Physical serial interfaces in the module.
OBJECT-TYPE    
  SEQUENCE OF  
    SerialInterfaceEntry

serialInterfaceEntry 1.3.6.1.4.1.351.110.4.1.1.1
An entry for each serial interface. Each entry contains information on port type, port speed.
OBJECT-TYPE    
  SerialInterfaceEntry  

serialPortNum 1.3.6.1.4.1.351.110.4.1.1.1.1
This object identifies the serial port number. The value 1 is used for Console Port. The Console Port is also known as control port(CP). The value 2 is used for Maintenance Port and this can be used as SLIP (Serial Line Internet Protocol) interface. The Maintenance Port is also known as Modem Port(MP).
OBJECT-TYPE    
  Integer32 1..2  

serialPortType 1.3.6.1.4.1.351.110.4.1.1.1.2
This object identifies the type of port. main(1) : This is applicable for Maintenance Port debug(2) : This is applicable for Console Port.
OBJECT-TYPE    
  INTEGER main(1), debug(2)  

serialPortEnable 1.3.6.1.4.1.351.110.4.1.1.1.3
This object is used for enabling/disabling serial port.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

serialPortbps 1.3.6.1.4.1.351.110.4.1.1.1.4
This object identifies the baud rate of the ports.
OBJECT-TYPE    
  INTEGER bps9600(1), bps2400(2), bps19200(3)  

serialPortNumOfValidEntries 1.3.6.1.4.1.351.110.4.1.2
This object contains number of serial ports. This identifies the number of entries in serialInterfacetable.
OBJECT-TYPE    
  Integer32 1..2  

basisSerialMIB 1.3.6.1.4.1.351.150.69
The MIB module to configure serial ports in Processor Module and different Service Modules(cards) in MGX8850,MGX8250 and MGX8220 ATM Edge switches.
MODULE-IDENTITY    

basisSerialMIBConformance 1.3.6.1.4.1.351.150.69.2
OBJECT IDENTIFIER    

basisSerialMIBGroups 1.3.6.1.4.1.351.150.69.2.1
OBJECT IDENTIFIER    

basisSerialConfGroup 1.3.6.1.4.1.351.150.69.2.1.1
The collection of objects which are used to represent serial ports.
OBJECT-GROUP    

basisSerialMIBCompliances 1.3.6.1.4.1.351.150.69.2.2
OBJECT IDENTIFIER    

basisSerialCompliance 1.3.6.1.4.1.351.150.69.2.2.1
The compliance statement for objects related to Serial Ports.
MODULE-COMPLIANCE    

Defined Objects

SerialInterfaceEntry  
SEQUENCE    
  Integer32 as serialPortNum  
  INTEGER as serialPortType  
  INTEGER as serialPortEnable  
  INTEGER as serialPortbps