BASP-Config-MIB

File: BASP-Config-MIB.mib (18616 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB

Imported symbols

enterprises IpAddress OBJECT-TYPE
DisplayString PhysAddress

Defined Objects

broadcom 1.3.6.1.4.1.4413
OBJECT IDENTIFIER    

enet 1.3.6.1.4.1.4413.1
OBJECT IDENTIFIER    

basp 1.3.6.1.4.1.4413.1.2
OBJECT IDENTIFIER    

baspConfig 1.3.6.1.4.1.4413.1.2.1
OBJECT IDENTIFIER    

baspTeam 1.3.6.1.4.1.4413.1.2.1.1
OBJECT IDENTIFIER    

btTeamNumber 1.3.6.1.4.1.4413.1.2.1.1.1
The number of loadbalance teams present on this system.
OBJECT-TYPE    
  INTEGER  

btTeamTable 1.3.6.1.4.1.4413.1.2.1.1.2
A list of team entries. The number of teams is given by the value of teamNumber.
OBJECT-TYPE    
  SEQUENCE OF  
    BtTeamEntry

btTeamEntry 1.3.6.1.4.1.4413.1.2.1.1.2.1
An entry containing team objects at the target system.
OBJECT-TYPE    
  BtTeamEntry  

btTeamIndex 1.3.6.1.4.1.4413.1.2.1.1.2.1.1
An unique value for each team. The value for each team must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
OBJECT-TYPE    
  INTEGER 0..65535  

btTeamName 1.3.6.1.4.1.4413.1.2.1.1.2.1.2
A textual string containing name of the team
OBJECT-TYPE    
  DisplayString  

btTeamType 1.3.6.1.4.1.4413.1.2.1.1.2.1.3
The type of team, distinguished according to the attribute assigned. When team has only one physical member, the team type is ignored
OBJECT-TYPE    
  INTEGER team-SLB(100), team-FEC-GEC(101), team-802-3-AD(102), team-SLB-AFD(104)  

btTeamMacAddress 1.3.6.1.4.1.4413.1.2.1.1.2.1.4
Mac address of the team. Mac address is assigned to a team when the team type is team-FEC-GEC(101) or team-802-3-AD(102)
OBJECT-TYPE    
  PhysAddress  

btPhyNumber 1.3.6.1.4.1.4413.1.2.1.1.2.1.5
Number of physical adapters in the team
OBJECT-TYPE    
  INTEGER  

btVirNumber 1.3.6.1.4.1.4413.1.2.1.1.2.1.6
Number of virtual adapters in the team
OBJECT-TYPE    
  INTEGER  

btMode 1.3.6.1.4.1.4413.1.2.1.1.2.1.7
mode of this team, PrimaryMode(0) or Standby(1). For team type other than team-SLB(100), this should always be PrimaryMode(0).
OBJECT-TYPE    
  INTEGER primaryMode(1), standby(2)  

btLiveLinkEnable 1.3.6.1.4.1.4413.1.2.1.1.2.1.8
LiveLink is enabled or not. Probe packet can be enabled only for team-SLB(100) and team-SLB-AFD(104).
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

btLinkPacketFrequency 1.3.6.1.4.1.4413.1.2.1.1.2.1.9
For LiveLink feature: The frequency in milliseconds that a link packet is to be sent.
OBJECT-TYPE    
  INTEGER  

btLinkMaxRetry 1.3.6.1.4.1.4413.1.2.1.1.2.1.10
For LiveLink feature: The maximum number of retries before failing a team member.
OBJECT-TYPE    
  INTEGER  

btLinkRetryFrequency 1.3.6.1.4.1.4413.1.2.1.1.2.1.11
For LiveLink feature: The frequency (milliseconds) a link packet is to be sent after a dropped link packet is detected.
OBJECT-TYPE    
  INTEGER  

btLinkTargetIpAddress1 1.3.6.1.4.1.4413.1.2.1.1.2.1.12
For LiveLink feature: The target IP address that a link packet is sent to. A DNS name cannot be specified since there is no reliable method to resolve the DNS name without introducing unacceptable risk. Only the first one is mandatory for LiveLink. All 0 is not available.
OBJECT-TYPE    
  IpAddress  

btLinkTargetIpAddress2 1.3.6.1.4.1.4413.1.2.1.1.2.1.13
For LiveLink feature: The target IP address that a link packet is sent to. A DNS name cannot be specified since there is no reliable method to resolve the DNS name without introducing unacceptable risk. This one is optional for LiveLink. All 0 is not available.
OBJECT-TYPE    
  IpAddress  

btLinkTargetIpAddress3 1.3.6.1.4.1.4413.1.2.1.1.2.1.14
For LiveLink feature: The target IP address that a link packet is sent to. A DNS name cannot be specified since there is no reliable method to resolve the DNS name without introducing unacceptable risk. This one is optional for LiveLink. All 0 is not available.
OBJECT-TYPE    
  IpAddress  

btLinkTargetIpAddress4 1.3.6.1.4.1.4413.1.2.1.1.2.1.15
For LiveLink feature: The target IP address that a link packet is sent to. A DNS name cannot be specified since there is no reliable method to resolve the DNS name without introducing unacceptable risk. This one is optional for LiveLink. All 0 is not available.
OBJECT-TYPE    
  IpAddress  

baspPhyAdapter 1.3.6.1.4.1.4413.1.2.1.2
OBJECT IDENTIFIER    

btPhyAdapterNumber 1.3.6.1.4.1.4413.1.2.1.2.1
Number of physical adapters presented in the physical adapter table.
OBJECT-TYPE    
  INTEGER  

btPhyAdapterTable 1.3.6.1.4.1.4413.1.2.1.2.2
The phyMember tables contain the physical adapter members of loadbalance teams.
OBJECT-TYPE    
  SEQUENCE OF  
    BtPhyAdapterEntry

btPhyAdapterEntry 1.3.6.1.4.1.4413.1.2.1.2.2.1
A team entry containing objects at the target system.
OBJECT-TYPE    
  BtPhyAdapterEntry  

btpTeamIndex 1.3.6.1.4.1.4413.1.2.1.2.2.1.1
An unique value for each team.
OBJECT-TYPE    
  INTEGER 0..65535  

btpAdapterIndex 1.3.6.1.4.1.4413.1.2.1.2.2.1.2
A value for each adapter within a team.
OBJECT-TYPE    
  INTEGER 0..65535  

btpAdapterDesc 1.3.6.1.4.1.4413.1.2.1.2.2.1.3
A textual string containing name of the adapter
OBJECT-TYPE    
  DisplayString  

btpMemberType 1.3.6.1.4.1.4413.1.2.1.2.2.1.4
The type of adapter member.
OBJECT-TYPE    
  INTEGER load-balance(100), standby(101)  

btpMacAddress 1.3.6.1.4.1.4413.1.2.1.2.2.1.5
Mac address of the adapter.
OBJECT-TYPE    
  PhysAddress  

btpMemberState 1.3.6.1.4.1.4413.1.2.1.2.2.1.6
State of the interface in the team.
OBJECT-TYPE    
  INTEGER unknown(1), link-up-not-join-traffic(2), disable-not-join-traffic(3), join-traffic(4)  

btpLiveLinkIp 1.3.6.1.4.1.4413.1.2.1.2.2.1.7
IP address for LiveLink.
OBJECT-TYPE    
  IpAddress  

baspVirAdapter 1.3.6.1.4.1.4413.1.2.1.3
OBJECT IDENTIFIER    

btVirAdapterNumber 1.3.6.1.4.1.4413.1.2.1.3.1
Number of virtual adapters presented in the virtual adapter table.
OBJECT-TYPE    
  INTEGER  

btVirAdapterTable 1.3.6.1.4.1.4413.1.2.1.3.2
The virMember tables contain the VLAN members of loadbalance teams.
OBJECT-TYPE    
  SEQUENCE OF  
    BtVirAdapterEntry

btVirAdapterEntry 1.3.6.1.4.1.4413.1.2.1.3.2.1
A team entry containing objects at the target system.
OBJECT-TYPE    
  BtVirAdapterEntry  

btvTeamIndex 1.3.6.1.4.1.4413.1.2.1.3.2.1.1
An unique value for each team.
OBJECT-TYPE    
  INTEGER 0..65535  

btvAdapterIndex 1.3.6.1.4.1.4413.1.2.1.3.2.1.2
A unique value for each virtual adapter in a team.
OBJECT-TYPE    
  INTEGER 0..65535  

btvAdapterDesc 1.3.6.1.4.1.4413.1.2.1.3.2.1.3
A textual string containing name of the VLAN
OBJECT-TYPE    
  DisplayString  

btvVlanId 1.3.6.1.4.1.4413.1.2.1.3.2.1.4
802.1Q VLAN ID of the virtual adapter.
OBJECT-TYPE    
  INTEGER  

btvLinkStatus 1.3.6.1.4.1.4413.1.2.1.3.2.1.5
Virtual adapter link status
OBJECT-TYPE    
  INTEGER link-up(1), link-fail(2)  

btvIPAddress 1.3.6.1.4.1.4413.1.2.1.3.2.1.6
IP address of the virtual adapter.
OBJECT-TYPE    
  IpAddress  

btvSubnetMask 1.3.6.1.4.1.4413.1.2.1.3.2.1.7
IP subnet Mask of the virtual adapter.
OBJECT-TYPE    
  IpAddress  

btvPhysAddress 1.3.6.1.4.1.4413.1.2.1.3.2.1.8
MAC address of the virtual adapter.
OBJECT-TYPE    
  PhysAddress  

btvLineSpeed 1.3.6.1.4.1.4413.1.2.1.3.2.1.9
A textual string displays the operating speed of the virtual adapter.
OBJECT-TYPE    
  DisplayString  

Defined Objects

BtTeamEntry  
SEQUENCE    
  INTEGER as btTeamIndex 0..65535  
  DisplayString as btTeamName  
  INTEGER as btTeamType  
  PhysAddress as btTeamMacAddress  
  INTEGER as btPhyNumber  
  INTEGER as btVirNumber  
  INTEGER as btMode  
  INTEGER as btLiveLinkEnable  
  INTEGER as btLinkPacketFrequency  
  INTEGER as btLinkMaxRetry  
  INTEGER as btLinkRetryFrequency  
  IpAddress as btLinkTargetIpAddress1  
  IpAddress as btLinkTargetIpAddress2  
  IpAddress as btLinkTargetIpAddress3  
  IpAddress as btLinkTargetIpAddress4  

BtPhyAdapterEntry  
SEQUENCE    
  INTEGER as btpTeamIndex 0..65535  
  INTEGER as btpAdapterIndex 0..65535  
  DisplayString as btpAdapterDesc  
  INTEGER as btpMemberType  
  PhysAddress as btpMacAddress  
  INTEGER as btpMemberState  
  IpAddress as btpLiveLinkIp  

BtVirAdapterEntry  
SEQUENCE    
  INTEGER as btvTeamIndex 0..65535  
  INTEGER as btvAdapterIndex 0..65535  
  DisplayString as btvAdapterDesc  
  INTEGER as btvVlanId  
  INTEGER as btvLinkStatus  
  IpAddress as btvIPAddress  
  IpAddress as btvSubnetMask  
  PhysAddress as btvPhysAddress  
  DisplayString as btvLineSpeed