BDCOM-TS

File: BDCOM-TS.mib (19574 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB
BDCOM-SMI

Imported symbols

IpAddress OBJECT-TYPE DisplayString
bdlocal

Defined Objects

bdlts 1.3.6.1.4.1.3320.2.9
OBJECT IDENTIFIER    

bdtsLines 1.3.6.1.4.1.3320.2.9.1
Number of terminal lines on this device. Includes virtual lines.
OBJECT-TYPE    
  INTEGER  

bdltsLineTable 1.3.6.1.4.1.3320.2.9.2
A list of terminal server line entries.
OBJECT-TYPE    
  SEQUENCE OF  
    BdLtsLineEntry

bdltsLineEntry 1.3.6.1.4.1.3320.2.9.2.1
A collection of per TTY objects in the BDCom Terminal Server implementation.
OBJECT-TYPE    
  BdLtsLineEntry  

bdtsLineActive 1.3.6.1.4.1.3320.2.9.2.1.1
Boolean whether this line is active or not.
OBJECT-TYPE    
  INTEGER  

bdtsLineType 1.3.6.1.4.1.3320.2.9.2.1.2
Type of line.
OBJECT-TYPE    
  INTEGER unknown(1), console(2), terminal(3), line-printer(4), virtual-terminal(5), auxiliary(6)  

bdtsLineAutobaud 1.3.6.1.4.1.3320.2.9.2.1.3
Boolean whether line will autobaud or not.
OBJECT-TYPE    
  INTEGER  

bdtsLineSpeedin 1.3.6.1.4.1.3320.2.9.2.1.4
What input speed the line is running at.
OBJECT-TYPE    
  INTEGER  

bdtsLineSpeedout 1.3.6.1.4.1.3320.2.9.2.1.5
What output speed the line is running at.
OBJECT-TYPE    
  INTEGER  

bdtsLineFlow 1.3.6.1.4.1.3320.2.9.2.1.6
What kind of flow control the line is using.
OBJECT-TYPE    
  INTEGER unknown(1), none(2), software-input(3), software-output(4), software-both(5), hardware-input(6), hardware-output(7), hardware-both(8)  

bdtsLineModem 1.3.6.1.4.1.3320.2.9.2.1.7
What kind of modem control the line is using.
OBJECT-TYPE    
  INTEGER unknown(1), none(2), call-in(3), call-out(4), cts-required(5), ri-is-cd(6), inout(7)  

bdtsLineLoc 1.3.6.1.4.1.3320.2.9.2.1.8
Describes the line's physical location.
OBJECT-TYPE    
  DisplayString  

bdtsLineTerm 1.3.6.1.4.1.3320.2.9.2.1.9
Describes the line's terminal type.
OBJECT-TYPE    
  DisplayString  

bdtsLineScrlen 1.3.6.1.4.1.3320.2.9.2.1.10
Length in lines of the screen of terminal attached to this line.
OBJECT-TYPE    
  INTEGER  

bdtsLineScrwid 1.3.6.1.4.1.3320.2.9.2.1.11
Width in characters of the screen of terminal attached to this line.
OBJECT-TYPE    
  INTEGER  

bdtsLineEsc 1.3.6.1.4.1.3320.2.9.2.1.12
Escape character used to break out of active sessions.
OBJECT-TYPE    
  DisplayString  

bdtsLineTmo 1.3.6.1.4.1.3320.2.9.2.1.13
Line idleness timeout in seconds.
OBJECT-TYPE    
  INTEGER  

bdtsLineSestmo 1.3.6.1.4.1.3320.2.9.2.1.14
Session idleness timeout in seconds.
OBJECT-TYPE    
  INTEGER  

bdtsLineRotary 1.3.6.1.4.1.3320.2.9.2.1.15
Rotary group number the line belongs in.
OBJECT-TYPE    
  INTEGER  

bdtsLineUses 1.3.6.1.4.1.3320.2.9.2.1.16
Number of times a connection has been made to or from this line.
OBJECT-TYPE    
  INTEGER  

bdtsLineNses 1.3.6.1.4.1.3320.2.9.2.1.17
Current number of sessions in use on this line.
OBJECT-TYPE    
  INTEGER  

bdtsLineUser 1.3.6.1.4.1.3320.2.9.2.1.18
TACACS user name, if TACACS enabled, of user on this line.
OBJECT-TYPE    
  DisplayString  

bdtsLineNoise 1.3.6.1.4.1.3320.2.9.2.1.19
Count of garbage characters received when line inactive.
OBJECT-TYPE    
  INTEGER  

bdtsLineNumber 1.3.6.1.4.1.3320.2.9.2.1.20
The line i've been talking about.
OBJECT-TYPE    
  INTEGER  

bdtsLineTimeActive 1.3.6.1.4.1.3320.2.9.2.1.21
The time in seconds since line was activated.
OBJECT-TYPE    
  INTEGER  

bdltsLineSessionTable 1.3.6.1.4.1.3320.2.9.3
A list of terminal server line and session entries.
OBJECT-TYPE    
  SEQUENCE OF  
    BdLtsLineSessionEntry

bdltsLineSessionEntry 1.3.6.1.4.1.3320.2.9.3.1
A collection of per session and per TTY objects in the BDCom Terminal Server implementation.
OBJECT-TYPE    
  BdLtsLineSessionEntry  

bdtslineSesType 1.3.6.1.4.1.3320.2.9.3.1.1
Type of session.
OBJECT-TYPE    
  INTEGER unknown(1), pad(2), stream(3), rlogin(4), telnet(5), tcp(6), lat(7), mop(8), slip(9), xremote(10), rshell(11)  

bdtslineSesDir 1.3.6.1.4.1.3320.2.9.3.1.2
Direction of session.
OBJECT-TYPE    
  INTEGER unknown(1), incoming(2), outgoing(3)  

bdtslineSesAddr 1.3.6.1.4.1.3320.2.9.3.1.3
Remote host address of session. [What about PAD connections?]
OBJECT-TYPE    
  IpAddress  

bdtslineSesName 1.3.6.1.4.1.3320.2.9.3.1.4
Remote host name of session.
OBJECT-TYPE    
  DisplayString  

bdtslineSesCur 1.3.6.1.4.1.3320.2.9.3.1.5
Boolean whether session is the currently active one.
OBJECT-TYPE    
  INTEGER  

bdtslineSesIdle 1.3.6.1.4.1.3320.2.9.3.1.6
Time in seconds session has been idle.
OBJECT-TYPE    
  INTEGER  

bdtslineSesLine 1.3.6.1.4.1.3320.2.9.3.1.7
Table index 1.
OBJECT-TYPE    
  INTEGER  

bdtslineSesSession 1.3.6.1.4.1.3320.2.9.3.1.8
Table index 2.
OBJECT-TYPE    
  INTEGER  

bdtsMsgTtyLine 1.3.6.1.4.1.3320.2.9.4
tty line to send the message to. -1 will send it to all tty lines
OBJECT-TYPE    
  INTEGER  

bdtsMsgIntervaltim 1.3.6.1.4.1.3320.2.9.5
Interval between reissuing message in milliseconds. Minimum non-zero setting is 10000. 0 will cause the routine to choose its own intervals becoming more frequent as MessageDuration gets close to expiring. 2hr, 1hr, 30min, 5min, 1min
OBJECT-TYPE    
  INTEGER  

bdtsMsgDuration 1.3.6.1.4.1.3320.2.9.6
Length of time to reissue message in milliseconds. Minimum non-zero setting is 10000. A setting of 0 will not repeat the message.
OBJECT-TYPE    
  INTEGER  

bdtsMsgText 1.3.6.1.4.1.3320.2.9.7
Up to 256 characters that will make up the message
OBJECT-TYPE    
  DisplayString  

bdtsMsgTmpBanner 1.3.6.1.4.1.3320.2.9.8
Should the message be used as a temporary banner. 1 - No. 2 - In addition to the normal banner
OBJECT-TYPE    
  INTEGER no(1), additive(2)  

bdtsMsgSend 1.3.6.1.4.1.3320.2.9.9
Sends the message. The value determines what to do after the message has completed.
OBJECT-TYPE    
  INTEGER nothing(1), reload(2), messagedone(3), abort(4)  

bdtsClrTtyLine 1.3.6.1.4.1.3320.2.9.10
tty line to clear. Read returns the last line cleared. A value of -1 indicates no lines have been cleared.
OBJECT-TYPE    
  INTEGER  

Defined Objects

BdLtsLineEntry  
SEQUENCE    
  INTEGER as bdtsLineActive  
  INTEGER as bdtsLineType  
  INTEGER as bdtsLineAutobaud  
  INTEGER as bdtsLineSpeedin  
  INTEGER as bdtsLineSpeedout  
  INTEGER as bdtsLineFlow  
  INTEGER as bdtsLineModem  
  DisplayString as bdtsLineLoc  
  DisplayString as bdtsLineTerm  
  INTEGER as bdtsLineScrlen  
  INTEGER as bdtsLineScrwid  
  DisplayString as bdtsLineEsc  
  INTEGER as bdtsLineTmo  
  INTEGER as bdtsLineSestmo  
  INTEGER as bdtsLineRotary  
  INTEGER as bdtsLineUses  
  INTEGER as bdtsLineNses  
  DisplayString as bdtsLineUser  
  INTEGER as bdtsLineNoise  
  INTEGER as bdtsLineNumber  
  INTEGER as bdtsLineTimeActive  

BdLtsLineSessionEntry  
SEQUENCE    
  INTEGER as bdtslineSesType  
  INTEGER as bdtslineSesDir  
  IpAddress as bdtslineSesAddr  
  DisplayString as bdtslineSesName  
  INTEGER as bdtslineSesCur  
  INTEGER as bdtslineSesIdle  
  INTEGER as bdtslineSesLine  
  INTEGER as bdtslineSesSession