
| SNMPv2-TC | RFC1155-SMI | RFC-1212 |
| DisplayString | Counter | OBJECT-TYPE |
| org | 1.3 | ||
| OBJECT IDENTIFIER | |||
| dod | 1.3.6 | ||
| OBJECT IDENTIFIER | |||
| internet | 1.3.6.1 | ||
| OBJECT IDENTIFIER | |||
| private | 1.3.6.1.4 | ||
| OBJECT IDENTIFIER | |||
| enterprises | 1.3.6.1.4.1 | ||
| OBJECT IDENTIFIER | |||
| bintec | 1.3.6.1.4.1.272 | ||
| OBJECT IDENTIFIER | |||
| bibo | 1.3.6.1.4.1.272.4 | ||
| OBJECT IDENTIFIER | |||
| biboipx | 1.3.6.1.4.1.272.4.9 | ||
| OBJECT IDENTIFIER | |||
| ipxClientTable | 1.3.6.1.4.1.272.4.9.1 | ||
| Each entry describes a client that has connected via WAN 2 | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| IPXClientEntry | |||
| ipxClientEntry | 1.3.6.1.4.1.272.4.9.1.1 | ||
| OBJECT-TYPE | |||
| IPXClientEntry | |||
| ipxClientNode | 1.3.6.1.4.1.272.4.9.1.1.1 | ||
| The dynamically assigned Node Id of the client | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(6) | ||
| ipxClientCircIndex | 1.3.6.1.4.1.272.4.9.1.1.2 | ||
| The dynamically assigned Network Number of the client | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ipxClientReconns | 1.3.6.1.4.1.272.4.9.1.1.3 | ||
| The number of reconnections | |||
| OBJECT-TYPE | |||
| Counter | |||
| ipxAllowTable | 1.3.6.1.4.1.272.4.9.2 | ||
| Each entry describes a rule for filtering IPX packets. Only IPX packets matching all of those rules will be delivered. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| IPXAllowEntry | |||
| ipxAllowEntry | 1.3.6.1.4.1.272.4.9.2.1 | ||
| OBJECT-TYPE | |||
| IPXAllowEntry | |||
| ipxAllowPktTypeMode | 1.3.6.1.4.1.272.4.9.2.1.1 | ||
| The IPX packet type will be checked if this field is set to 'verify' | |||
| OBJECT-TYPE | |||
| INTEGER | dont-verify(1), verify(2), delete(3) | ||
| ipxAllowPktType | 1.3.6.1.4.1.272.4.9.2.1.2 | ||
| The various IPX packet types | |||
| OBJECT-TYPE | |||
| INTEGER | unknown(256), rip(1), sap(4), spx(5), ncp(17), netbios(20) | ||
| ipxAllowDstIfStatus | 1.3.6.1.4.1.272.4.9.2.1.3 | ||
| Set this value to 'up', if packets should only be forwarded to active (dialup-)links | |||
| OBJECT-TYPE | |||
| INTEGER | dont-verify(1), up(2) | ||
| ipxAllowDstNetMode | 1.3.6.1.4.1.272.4.9.2.1.4 | ||
| The IPX destination network address will be checked if this field is set to 'verify' | |||
| OBJECT-TYPE | |||
| INTEGER | dont-verify(1), verify(2) | ||
| ipxAllowDstNet | 1.3.6.1.4.1.272.4.9.2.1.5 | ||
| The IPX destination network address | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ipxAllowDstNodeMode | 1.3.6.1.4.1.272.4.9.2.1.6 | ||
| The IPX destination node address will be checked if this field is set to 'verify' | |||
| OBJECT-TYPE | |||
| INTEGER | dont-verify(1), verify(2) | ||
| ipxAllowDstNode | 1.3.6.1.4.1.272.4.9.2.1.7 | ||
| The IPX destination node address | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(6) | ||
| ipxAllowDstSockMode | 1.3.6.1.4.1.272.4.9.2.1.8 | ||
| The IPX destination socket number will be checked if this field is set to 'verify' | |||
| OBJECT-TYPE | |||
| INTEGER | dont-verify(1), verify(2) | ||
| ipxAllowDstSock | 1.3.6.1.4.1.272.4.9.2.1.9 | ||
| The destination socket | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ipxAllowSrcIfIndexMode | 1.3.6.1.4.1.272.4.9.2.1.10 | ||
| The index of the receiving interface will be checked if this field is set to 'verify' | |||
| OBJECT-TYPE | |||
| INTEGER | dont-verify(1), verify(2) | ||
| ipxAllowSrcIfIndex | 1.3.6.1.4.1.272.4.9.2.1.11 | ||
| The index of the receiving interface | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ipxAllowSrcNetMode | 1.3.6.1.4.1.272.4.9.2.1.12 | ||
| The IPX source network address will be checked if this field is set to 'verify' | |||
| OBJECT-TYPE | |||
| INTEGER | dont-verify(1), verify(2) | ||
| ipxAllowSrcNet | 1.3.6.1.4.1.272.4.9.2.1.13 | ||
| The IPX source network address | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ipxAllowSrcNodeMode | 1.3.6.1.4.1.272.4.9.2.1.14 | ||
| The IPX source node address will be checked if this field is set to 'verify' | |||
| OBJECT-TYPE | |||
| INTEGER | dont-verify(1), verify(2) | ||
| ipxAllowSrcNode | 1.3.6.1.4.1.272.4.9.2.1.15 | ||
| The IPX source node address | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(6) | ||
| ipxAllowSrcSockMode | 1.3.6.1.4.1.272.4.9.2.1.16 | ||
| The IPX source socket number will be checked if this field is set to 'verify' | |||
| OBJECT-TYPE | |||
| INTEGER | dont-verify(1), verify(2) | ||
| ipxAllowSrcSock | 1.3.6.1.4.1.272.4.9.2.1.17 | ||
| The source socket | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ipxDenyTable | 1.3.6.1.4.1.272.4.9.3 | ||
| Each entry describes a rule for filtering IPX packets. IPX packets matching any of those rules will be discarded. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| IPXDenyEntry | |||
| ipxDenyEntry | 1.3.6.1.4.1.272.4.9.3.1 | ||
| OBJECT-TYPE | |||
| IPXDenyEntry | |||
| ipxDenyPktTypeMode | 1.3.6.1.4.1.272.4.9.3.1.1 | ||
| The IPX packet type will be checked if this field is set to 'verify' | |||
| OBJECT-TYPE | |||
| INTEGER | dont-verify(1), verify(2), delete(3) | ||
| ipxDenyPktType | 1.3.6.1.4.1.272.4.9.3.1.2 | ||
| The various IPX packet types | |||
| OBJECT-TYPE | |||
| INTEGER | unknown(256), rip(1), sap(4), spx(5), ncp(17), netbios(20) | ||
| ipxDenyDstIfStatus | 1.3.6.1.4.1.272.4.9.3.1.3 | ||
| Set this value to 'dormant', if packets should not be forwarded to sleeping (dialup-)links | |||
| OBJECT-TYPE | |||
| INTEGER | dont-verify(1), dormant(2) | ||
| ipxDenyDstNetMode | 1.3.6.1.4.1.272.4.9.3.1.4 | ||
| The IPX destination network address will be checked if this field is set to 'verify' | |||
| OBJECT-TYPE | |||
| INTEGER | dont-verify(1), verify(2) | ||
| ipxDenyDstNet | 1.3.6.1.4.1.272.4.9.3.1.5 | ||
| The IPX destination network address | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ipxDenyDstNodeMode | 1.3.6.1.4.1.272.4.9.3.1.6 | ||
| The IPX destination node address will be checked if this field is set to 'verify' | |||
| OBJECT-TYPE | |||
| INTEGER | dont-verify(1), verify(2) | ||
| ipxDenyDstNode | 1.3.6.1.4.1.272.4.9.3.1.7 | ||
| The IPX destination node address | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(6) | ||
| ipxDenyDstSockMode | 1.3.6.1.4.1.272.4.9.3.1.8 | ||
| The destination socket will be checked if this field is set to 'verify' | |||
| OBJECT-TYPE | |||
| INTEGER | dont-verify(1), verify(2) | ||
| ipxDenyDstSock | 1.3.6.1.4.1.272.4.9.3.1.9 | ||
| The destination socket | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ipxDenySrcIfIndexMode | 1.3.6.1.4.1.272.4.9.3.1.10 | ||
| The index of the receiving interface will be checked if this field is set to 'verify' | |||
| OBJECT-TYPE | |||
| INTEGER | dont-verify(1), verify(2) | ||
| ipxDenySrcIfIndex | 1.3.6.1.4.1.272.4.9.3.1.11 | ||
| The index of the receiving interface | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ipxDenySrcNetMode | 1.3.6.1.4.1.272.4.9.3.1.12 | ||
| The IPX source socket number will be checked if this field is set to 'verify' | |||
| OBJECT-TYPE | |||
| INTEGER | dont-verify(1), verify(2) | ||
| ipxDenySrcNet | 1.3.6.1.4.1.272.4.9.3.1.13 | ||
| The IPX source network address | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ipxDenySrcNodeMode | 1.3.6.1.4.1.272.4.9.3.1.14 | ||
| The IPX destination node address will be checked if this field is set to 'verify' | |||
| OBJECT-TYPE | |||
| INTEGER | dont-verify(1), verify(2) | ||
| ipxDenySrcNode | 1.3.6.1.4.1.272.4.9.3.1.15 | ||
| The IPX destination node address | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(6) | ||
| ipxDenySrcSockMode | 1.3.6.1.4.1.272.4.9.3.1.16 | ||
| The IPX source socket number will be checked if this field is set to 'verify' | |||
| OBJECT-TYPE | |||
| INTEGER | dont-verify(1), verify(2) | ||
| ipxDenySrcSock | 1.3.6.1.4.1.272.4.9.3.1.17 | ||
| The source socket | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ipxAdmin | 1.3.6.1.4.1.272.4.9.4 | ||
| OBJECT IDENTIFIER | |||
| ipxAdmSpxSpoofing | 1.3.6.1.4.1.272.4.9.4.1 | ||
| Enable/disable SPX watchdog spoofing (on WAN links only) | |||
| OBJECT-TYPE | |||
| INTEGER | on(1), off(2) | ||
| ipxAdmIpxSpoofing | 1.3.6.1.4.1.272.4.9.4.2 | ||
| Enable/disable IPX watchdog spoofing (on WAN links only) | |||
| OBJECT-TYPE | |||
| INTEGER | on(1), off(2) | ||
| ipxAdmNETBIOSRepl | 1.3.6.1.4.1.272.4.9.4.3 | ||
| Handling of replicated NetBIOS broadcasts: off : dont replicate at all on : enable normal replication lan_only: dont replicate on WAN links | |||
| OBJECT-TYPE | |||
| INTEGER | on(1), off(2), lan-only(3) | ||
| ipxAdmSpxVerTimeout | 1.3.6.1.4.1.272.4.9.4.4 | ||
| Idle time SPX will wait before sending a watchdog | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ipxAdmSpxAbrTimeout | 1.3.6.1.4.1.272.4.9.4.5 | ||
| Idle time SPX will wait before aborting the connection | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ipxAdmRIPSAPOffset | 1.3.6.1.4.1.272.4.9.4.6 | ||
| Offset interval between RIP-Response and SAP-Response | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ipxAdmLearnStatics | 1.3.6.1.4.1.272.4.9.4.7 | ||
| take entries from ipxDestTable and/or ipxDestServTable and put them into ipxStaticRoute-/ipxStaticServTable | |||
| OBJECT-TYPE | |||
| INTEGER | done(1), rip(2), sap(3), both(4) | ||
| ipxAdmSpxConns | 1.3.6.1.4.1.272.4.9.4.8 | ||
| Number of spoofed SPX connections | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| sapAllowTable | 1.3.6.1.4.1.272.4.9.5 | ||
| Each entry describes a rule for filtering services. Only services matching any of those rules will be learned/forwarded. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SAPAllowEntry | |||
| sapAllowEntry | 1.3.6.1.4.1.272.4.9.5.1 | ||
| OBJECT-TYPE | |||
| SAPAllowEntry | |||
| sapAllowIfIndexMode | 1.3.6.1.4.1.272.4.9.5.1.1 | ||
| dont_verify: the interface index is not verified verify: check interface index delete: delete this rule | |||
| OBJECT-TYPE | |||
| INTEGER | dont-verify(1), verify(2), delete(3) | ||
| sapAllowIfIndex | 1.3.6.1.4.1.272.4.9.5.1.2 | ||
| This rule is applied to services originating and/or (see sapAllowDirection) destined for the interface with this index. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| sapAllowDirection | 1.3.6.1.4.1.272.4.9.5.1.3 | ||
| dont_verify: the interface index is not verified outgoing: this rule is applied to services being sent incoming: this rule is applied to incoming services both: this rule is applied to incoming and outgoing services | |||
| OBJECT-TYPE | |||
| INTEGER | dont-verify(1), outgoing(2), incoming(3), both(4) | ||
| sapAllowTypeMode | 1.3.6.1.4.1.272.4.9.5.1.4 | ||
| dont_verify: don't check service type verify: check service type | |||
| OBJECT-TYPE | |||
| INTEGER | dont-verify(1), verify(2) | ||
| sapAllowType | 1.3.6.1.4.1.272.4.9.5.1.5 | ||
| The service type to be checked. Examples: 4: file server 7: print server | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(2) | ||
| sapAllowNetMode | 1.3.6.1.4.1.272.4.9.5.1.6 | ||
| dont_verify: don't check network number verify: check network number | |||
| OBJECT-TYPE | |||
| INTEGER | dont-verify(1), verify(2) | ||
| sapAllowNet | 1.3.6.1.4.1.272.4.9.5.1.7 | ||
| the service's network number to be checked | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(4) | ||
| sapAllowNodeMode | 1.3.6.1.4.1.272.4.9.5.1.8 | ||
| dont_verify: don't check node number verify: check node number | |||
| OBJECT-TYPE | |||
| INTEGER | dont-verify(1), verify(2) | ||
| sapAllowNode | 1.3.6.1.4.1.272.4.9.5.1.9 | ||
| the service's node number to be checked | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(6) | ||
| sapAllowSockMode | 1.3.6.1.4.1.272.4.9.5.1.10 | ||
| dont_verify: don't check socket number verify: check socket number | |||
| OBJECT-TYPE | |||
| INTEGER | dont-verify(1), verify(2) | ||
| sapAllowSock | 1.3.6.1.4.1.272.4.9.5.1.11 | ||
| the service's socket number to be checked | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(2) | ||
| sapAllowName | 1.3.6.1.4.1.272.4.9.5.1.12 | ||
| Instead of entering Type/Net/Node/Socket directly, you could fill in the server name here. The Type/Net/Node/Socket fields will then be looked up in the ipxDestServTable. If a service of this name exists, the values of this rule will be set. Caution: the Brick IPX does not use this name field for filtering. It is just meant for easier usage. Only Type/Net/Node/Socket fields above will be checked (according to the dont_verify/verify fields) | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..48) | ||
| sapDenyTable | 1.3.6.1.4.1.272.4.9.6 | ||
| Each entry describes a rule for filtering services. Services matching any of those rules will be discarded. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SAPDenyEntry | |||
| sapDenyEntry | 1.3.6.1.4.1.272.4.9.6.1 | ||
| OBJECT-TYPE | |||
| SAPDenyEntry | |||
| sapDenyIfIndexMode | 1.3.6.1.4.1.272.4.9.6.1.1 | ||
| dont_verify: the interface index is not verified verify: the interface index is not verified delete: delete this rule | |||
| OBJECT-TYPE | |||
| INTEGER | dont-verify(1), verify(2), delete(3) | ||
| sapDenyIfIndex | 1.3.6.1.4.1.272.4.9.6.1.2 | ||
| This rule is applied to services originating and/or (see sapDenyDirection) destined for the interface with this index. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| sapDenyDirection | 1.3.6.1.4.1.272.4.9.6.1.3 | ||
| dont_verify: the direction is not verified outgoing: this rule is applied to services being sent incoming: this rule is applied to incoming services both: this rule is applied to incoming and outgoing services | |||
| OBJECT-TYPE | |||
| INTEGER | dont-verify(1), outgoing(2), incoming(3), both(4) | ||
| sapDenyTypeMode | 1.3.6.1.4.1.272.4.9.6.1.4 | ||
| dont_verify: don't check service type verify: check service type | |||
| OBJECT-TYPE | |||
| INTEGER | dont-verify(1), verify(2) | ||
| sapDenyType | 1.3.6.1.4.1.272.4.9.6.1.5 | ||
| The service type to be checked. Examples: 4: file server 7: print server | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(2) | ||
| sapDenyNetMode | 1.3.6.1.4.1.272.4.9.6.1.6 | ||
| dont_verify: don't check network number verify: check network number | |||
| OBJECT-TYPE | |||
| INTEGER | dont-verify(1), verify(2) | ||
| sapDenyNet | 1.3.6.1.4.1.272.4.9.6.1.7 | ||
| the service's network number to be checked | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(4) | ||
| sapDenyNodeMode | 1.3.6.1.4.1.272.4.9.6.1.8 | ||
| dont_verify: don't check node number verify: check node number | |||
| OBJECT-TYPE | |||
| INTEGER | dont-verify(1), verify(2) | ||
| sapDenyNode | 1.3.6.1.4.1.272.4.9.6.1.9 | ||
| the service's node number to be checked | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(6) | ||
| sapDenySockMode | 1.3.6.1.4.1.272.4.9.6.1.10 | ||
| dont_verify: don't check socket number verify: check socket number | |||
| OBJECT-TYPE | |||
| INTEGER | dont-verify(1), verify(2) | ||
| sapDenySock | 1.3.6.1.4.1.272.4.9.6.1.11 | ||
| the service's socket number to be checked | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(2) | ||
| sapDenyName | 1.3.6.1.4.1.272.4.9.6.1.12 | ||
| Instead of entering Type/Net/Node/Socket directly, you could fill in the server name here. The Type/Net/Node/Socket fields will then be looked up in the ipxDestServTable. If a service of this name exists, the values of this rule will be set. Caution: the Brick IPX does not use this name field for filtering. It is just meant for easier usage. Only Type/Net/Node/Socket fields above will be checked (according to the dont_verify/verify fields) | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..48) | ||
| IPXClientEntry | |||
| SEQUENCE | |||
| OCTET STRING as ipxClientNode | |||
| INTEGER as ipxClientCircIndex | |||
| Counter as ipxClientReconns | |||
| IPXAllowEntry | |||
| SEQUENCE | |||
| INTEGER as ipxAllowPktTypeMode | |||
| INTEGER as ipxAllowPktType | |||
| INTEGER as ipxAllowDstIfStatus | |||
| INTEGER as ipxAllowDstNetMode | |||
| INTEGER as ipxAllowDstNet | |||
| INTEGER as ipxAllowDstNodeMode | |||
| OCTET STRING as ipxAllowDstNode | |||
| INTEGER as ipxAllowDstSockMode | |||
| INTEGER as ipxAllowDstSock | |||
| INTEGER as ipxAllowSrcIfIndexMode | |||
| INTEGER as ipxAllowSrcIfIndex | |||
| INTEGER as ipxAllowSrcNetMode | |||
| INTEGER as ipxAllowSrcNet | |||
| INTEGER as ipxAllowSrcNodeMode | |||
| OCTET STRING as ipxAllowSrcNode | |||
| INTEGER as ipxAllowSrcSockMode | |||
| INTEGER as ipxAllowSrcSock | |||
| IPXDenyEntry | |||
| SEQUENCE | |||
| INTEGER as ipxDenyPktTypeMode | |||
| INTEGER as ipxDenyPktType | |||
| INTEGER as ipxDenyDstNetMode | |||
| INTEGER as ipxDenyDstIfStatus | |||
| INTEGER as ipxDenyDstNet | |||
| INTEGER as ipxDenyDstNodeMode | |||
| OCTET STRING as ipxDenyDstNode | |||
| INTEGER as ipxDenyDstSockMode | |||
| INTEGER as ipxDenyDstSock | |||
| INTEGER as ipxDenySrcIfIndexMode | |||
| INTEGER as ipxDenySrcIfIndex | |||
| INTEGER as ipxDenySrcNetMode | |||
| INTEGER as ipxDenySrcNet | |||
| INTEGER as ipxDenySrcNodeMode | |||
| OCTET STRING as ipxDenySrcNode | |||
| INTEGER as ipxDenySrcSockMode | |||
| INTEGER as ipxDenySrcSock | |||
| SAPAllowEntry | |||
| SEQUENCE | |||
| INTEGER as sapAllowIfIndexMode | |||
| INTEGER as sapAllowIfIndex | |||
| INTEGER as sapAllowDirection | |||
| INTEGER as sapAllowTypeMode | |||
| OCTET STRING as sapAllowType | |||
| INTEGER as sapAllowNetMode | |||
| OCTET STRING as sapAllowNet | |||
| INTEGER as sapAllowNodeMode | |||
| OCTET STRING as sapAllowNode | |||
| INTEGER as sapAllowSockMode | |||
| OCTET STRING as sapAllowSock | |||
| DisplayString as sapAllowName | |||
| SAPDenyEntry | |||
| SEQUENCE | |||
| INTEGER as sapDenyIfIndexMode | |||
| INTEGER as sapDenyIfIndex | |||
| INTEGER as sapDenyDirection | |||
| INTEGER as sapDenyTypeMode | |||
| OCTET STRING as sapDenyType | |||
| INTEGER as sapDenyNetMode | |||
| OCTET STRING as sapDenyNet | |||
| INTEGER as sapDenyNodeMode | |||
| OCTET STRING as sapDenyNode | |||
| INTEGER as sapDenySockMode | |||
| OCTET STRING as sapDenySock | |||
| DisplayString as sapDenyName | |||