BIANCA-BRICK-PPPOE-MIB

File: BIANCA-BRICK-PPPOE-MIB.mib (10902 bytes)

Imported modules

RFC1155-SMI SNMPv2-TC RFC-1212

Imported symbols

TimeTicks IpAddress Counter
DisplayString PhysAddress OBJECT-TYPE

Defined Objects

org 1.3
OBJECT IDENTIFIER    

dod 1.3.6
OBJECT IDENTIFIER    

internet 1.3.6.1
OBJECT IDENTIFIER    

private 1.3.6.1.4
OBJECT IDENTIFIER    

enterprises 1.3.6.1.4.1
OBJECT IDENTIFIER    

bintec 1.3.6.1.4.1.272
OBJECT IDENTIFIER    

bibo 1.3.6.1.4.1.272.4
OBJECT IDENTIFIER    

pppoe 1.3.6.1.4.1.272.4.24
OBJECT IDENTIFIER    

pppoeCallTable 1.3.6.1.4.1.272.4.24.1
The pppoeCallTable displays all currently active PPPoE calls (incoming and outgoing). Only the system can add or remove entries to this table. Creating entries: Entries are added when an outgoing call is made or when an incoming call is connected. Deleting entries: Entries are removed once the respective call is disconnected.
OBJECT-TYPE    
  SEQUENCE OF  
    PppoeCallEntry

pppoeCallEntry 1.3.6.1.4.1.272.4.24.1.1
OBJECT-TYPE    
  PppoeCallEntry  

pppoeCallId 1.3.6.1.4.1.272.4.24.1.1.1
Direction of the PPPoE call, incoming(1) or outgoing(2).
OBJECT-TYPE    
  INTEGER  

pppoeCallDirection 1.3.6.1.4.1.272.4.24.1.1.2
Direction of the PPPoE call, incoming(1) or outgoing(2).
OBJECT-TYPE    
  INTEGER incoming(1), outgoing(2)  

pppoeCallAge 1.3.6.1.4.1.272.4.24.1.1.3
The age of the call. For outgoing calls, the time since the call began, or for incoming calls, the time since the call was received. The format is in hh:mm:ss.00.
OBJECT-TYPE    
  TimeTicks  

pppoeCallState 1.3.6.1.4.1.272.4.24.1.1.4
The state of the PPPoE discovery stage according RFC 2516.
OBJECT-TYPE    
  INTEGER idle(1), wait-pado(2), wait-padr(3), wait-pads(4), established(5), terminated(6)  

pppoeCallRemotePhysAddress 1.3.6.1.4.1.272.4.24.1.1.5
Peer's Ethernet address.
OBJECT-TYPE    
  PhysAddress  

pppoeCallLocalPhysAddress 1.3.6.1.4.1.272.4.24.1.1.6
Local Ethernet Address.
OBJECT-TYPE    
  PhysAddress  

pppoeCallAcName 1.3.6.1.4.1.272.4.24.1.1.7
The PPPoE access concentrator's name.
OBJECT-TYPE    
  DisplayString  

pppoeCallService 1.3.6.1.4.1.272.4.24.1.1.8
The PPPoE service name, indicating the service the Host is requesting.
OBJECT-TYPE    
  DisplayString  

pppoeCallReceivedPackets 1.3.6.1.4.1.272.4.24.1.1.9
Count of received valid GRE-encapsulated packets.
OBJECT-TYPE    
  Counter  

pppoeCallReceivedOctets 1.3.6.1.4.1.272.4.24.1.1.10
Count of received valid Octets.
OBJECT-TYPE    
  Counter  

pppoeCallReceivedErrors 1.3.6.1.4.1.272.4.24.1.1.11
Count of received invalid GRE-encapsulated packets.
OBJECT-TYPE    
  Counter  

pppoeCallTransmitPackets 1.3.6.1.4.1.272.4.24.1.1.12
Count of transmitted GRE-encapsulated packets.
OBJECT-TYPE    
  Counter  

pppoeCallTransmitOctets 1.3.6.1.4.1.272.4.24.1.1.13
Count of transmitted Octets.
OBJECT-TYPE    
  Counter  

pppoeCallTransmitErrors 1.3.6.1.4.1.272.4.24.1.1.14
Count of transmit errors.
OBJECT-TYPE    
  Counter  

pppoeCallInfo 1.3.6.1.4.1.272.4.24.1.1.15
Additional information to identify the PPPoE call
OBJECT-TYPE    
  DisplayString  

pppoeCreditsTable 1.3.6.1.4.1.272.4.24.2
The pppoeCreditsTable contains informations about current used resources and maximum allowed 'PPPoE-Service'-dependent resources. during a specified interval subsystem. Creating entries: Entries are added by the user. Deleting entries: Entries are removed by setting an entry's pppoeCreditsSurveillance object to 'delete'.
OBJECT-TYPE    
  SEQUENCE OF  
    PppoeCreditsEntry

pppoeCreditsEntry 1.3.6.1.4.1.272.4.24.2.1
OBJECT-TYPE    
  PppoeCreditsEntry  

pppoeCreditsService 1.3.6.1.4.1.272.4.24.2.1.1
The PPPoE service name, indicating the service the Host is requesting.
OBJECT-TYPE    
  DisplayString  

pppoeCreditsSurveillance 1.3.6.1.4.1.272.4.24.2.1.2
Surveillance on or off.
OBJECT-TYPE    
  INTEGER off(1), on(2), delete(3)  

pppoeCreditsMeasuretime 1.3.6.1.4.1.272.4.24.2.1.3
Time of one observation interval in seconds.
OBJECT-TYPE    
  INTEGER  

pppoeCreditsMaxInCon 1.3.6.1.4.1.272.4.24.2.1.4
Maximum number of allowed incoming connections during the observation interval. -1 disables this limit.
OBJECT-TYPE    
  INTEGER  

pppoeCreditsMaxOutCon 1.3.6.1.4.1.272.4.24.2.1.5
Maximum number of allowed outgoing connections during the observation interval. -1 disables this limit.
OBJECT-TYPE    
  INTEGER  

pppoeCreditsMaxInDuration 1.3.6.1.4.1.272.4.24.2.1.6
Maximum connect time for incoming connections in seconds during the observation interval. -1 disables this limit.
OBJECT-TYPE    
  INTEGER  

pppoeCreditsMaxOutDuration 1.3.6.1.4.1.272.4.24.2.1.7
Maximum connect time for outgoing connections in seconds during the observation interval. -1 disables this limit
OBJECT-TYPE    
  INTEGER  

pppoeCreditsTimeleft 1.3.6.1.4.1.272.4.24.2.1.8
Time in seconds left in current interval. Writing to Timeleft will restart the observation interval.
OBJECT-TYPE    
  INTEGER  

pppoeCreditsCurrentInCon 1.3.6.1.4.1.272.4.24.2.1.9
Current number of incoming connections.
OBJECT-TYPE    
  INTEGER  

pppoeCreditsCurrentOutCon 1.3.6.1.4.1.272.4.24.2.1.10
Current number of outgoing connections.
OBJECT-TYPE    
  INTEGER  

pppoeCreditsTotalInCon 1.3.6.1.4.1.272.4.24.2.1.11
Total count of incoming connections during the observation interval.
OBJECT-TYPE    
  INTEGER  

pppoeCreditsTotalOutCon 1.3.6.1.4.1.272.4.24.2.1.12
Total count of outgoing connections during the observation interval.
OBJECT-TYPE    
  INTEGER  

pppoeCreditsTotalInDuration 1.3.6.1.4.1.272.4.24.2.1.13
Total connect time of incoming connections during the observation interval.
OBJECT-TYPE    
  INTEGER  

pppoeCreditsTotalOutDuration 1.3.6.1.4.1.272.4.24.2.1.14
Total connect time of outgoing connections during the observation interval.
OBJECT-TYPE    
  INTEGER  

pppoeCreditsCurrentAccount 1.3.6.1.4.1.272.4.24.2.1.15
Total connect time of all outgoing connections during the observation interval calculated in percent of 'pppoeCreditsMaxOutDuration'.
OBJECT-TYPE    
  INTEGER 0..100  

Defined Objects

PppoeCallEntry  
SEQUENCE    
  INTEGER as pppoeCallId  
  INTEGER as pppoeCallDirection  
  TimeTicks as pppoeCallAge  
  INTEGER as pppoeCallState  
  PhysAddress as pppoeCallRemotePhysAddress  
  PhysAddress as pppoeCallLocalPhysAddress  
  DisplayString as pppoeCallAcName  
  DisplayString as pppoeCallService  
  Counter as pppoeCallReceivedPackets  
  Counter as pppoeCallReceivedOctets  
  Counter as pppoeCallReceivedErrors  
  Counter as pppoeCallTransmitPackets  
  Counter as pppoeCallTransmitOctets  
  Counter as pppoeCallTransmitErrors  
  DisplayString as pppoeCallInfo  

PppoeCreditsEntry  
SEQUENCE    
  DisplayString as pppoeCreditsService  
  INTEGER as pppoeCreditsSurveillance  
  INTEGER as pppoeCreditsMeasuretime  
  INTEGER as pppoeCreditsMaxInCon  
  INTEGER as pppoeCreditsMaxOutCon  
  INTEGER as pppoeCreditsMaxInDuration  
  INTEGER as pppoeCreditsMaxOutDuration  
  INTEGER as pppoeCreditsTimeleft  
  INTEGER as pppoeCreditsCurrentInCon  
  INTEGER as pppoeCreditsCurrentOutCon  
  INTEGER as pppoeCreditsTotalInCon  
  INTEGER as pppoeCreditsTotalOutCon  
  INTEGER as pppoeCreditsTotalInDuration  
  INTEGER as pppoeCreditsTotalOutDuration  
  INTEGER as pppoeCreditsCurrentAccount