BIANCA-BRICK-RADIUS-MIB

File: BIANCA-BRICK-RADIUS-MIB.mib (9114 bytes)

Imported modules

RFC1155-SMI RFC-1212 SNMPv2-TC

Imported symbols

IpAddress Counter OBJECT-TYPE
DisplayString

Defined Objects

org 1.3
OBJECT IDENTIFIER    

dod 1.3.6
OBJECT IDENTIFIER    

internet 1.3.6.1
OBJECT IDENTIFIER    

private 1.3.6.1.4
OBJECT IDENTIFIER    

enterprises 1.3.6.1.4.1
OBJECT IDENTIFIER    

bintec 1.3.6.1.4.1.272
OBJECT IDENTIFIER    

bintecsec 1.3.6.1.4.1.272.254
OBJECT IDENTIFIER    

radius 1.3.6.1.4.1.272.254.8
OBJECT IDENTIFIER    

radiusServerTable 1.3.6.1.4.1.272.254.8.1
OBJECT-TYPE    
  SEQUENCE OF  
    RadiusServerEntry

radiusServerEntry 1.3.6.1.4.1.272.254.8.1.1
OBJECT-TYPE    
  RadiusServerEntry  

radiusSrvProtocol 1.3.6.1.4.1.272.254.8.1.1.1
Type of authentication server. To configure the radius authentication use authentication(1), for radius accounting accounting(2), for user authentication on login shell login(3).
OBJECT-TYPE    
  INTEGER authentication(1), accounting(2), login(3)  

radiusSrvAddress 1.3.6.1.4.1.272.254.8.1.1.2
The Radius Server IP Address.
OBJECT-TYPE    
  IpAddress  

radiusSrvPort 1.3.6.1.4.1.272.254.8.1.1.3
The radius server port. Please notice that RFC2138 assigns port 1812 and 1813 for authentication and accounting, respectively. Many Radius servers still use the former assigned port 1645 and 1646 instead. The default value is 1812 and 1813.
OBJECT-TYPE    
  INTEGER  

radiusSrvSecret 1.3.6.1.4.1.272.254.8.1.1.4
The shared secret between radius server and Brick.
OBJECT-TYPE    
  DisplayString  

radiusSrvPriority 1.3.6.1.4.1.272.254.8.1.1.5
The radius server with the lowest priority is the first used for request. If there is no response (see also the values Timeout and Retries) the radius server with the next lowest priority will be used. Default value is 0.
OBJECT-TYPE    
  INTEGER 0..7  

radiusSrvTimeout 1.3.6.1.4.1.272.254.8.1.1.6
The amount of milliseconds (1/1000s) waiting for an outstanding request. Default is 1000 (1 second).
OBJECT-TYPE    
  INTEGER 50..50000  

radiusSrvRetries 1.3.6.1.4.1.272.254.8.1.1.7
The number of retries sent for each request, until the server state is set to inactive. Default value is 1. To prevent the radiusSrvState ever switch to inactive, set this value to 0.
OBJECT-TYPE    
  INTEGER 0..10  

radiusSrvState 1.3.6.1.4.1.272.254.8.1.1.8
When operational, the server state is active(1). If the radius server does not respond, its state is set to inactive(2). The administrator can set the state manually to disabled(3), or delete(4) the entry.
OBJECT-TYPE    
  INTEGER active(1), inactive(2), disabled(3), delete(4)  

radiusSrvPolicy 1.3.6.1.4.1.272.254.8.1.1.9
If set to authoritative(1), a negative answer to a request will be accepted. This is not necessarily true when set to non-authoritative(2), where the next radius server will be asked until there is finally an authoritative(1) server configured.
OBJECT-TYPE    
  INTEGER authoritative(1), non-authoritative(2)  

radiusSrvValidate 1.3.6.1.4.1.272.254.8.1.1.10
This additional option is only used for bogus RADIUS servers, which send response messages with a wrong calculated MD5 checksum. All messages generated by the brick, however, will always use the proper authentication scheme. For security reasons, this option should always be set to enabled(1).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

radiusSrvDialout 1.3.6.1.4.1.272.254.8.1.1.11
This option provides a means for RADIUS dialout configuration. When set to enabled(1), routing information is read into the brick after system startup. This information must be configured in the RADIUS server as dialout-1 to dialout-n, where n is a value of range 1-99. The end is automatically determined when the brick gets a negative response. This means, all entrys must be consecutive. The default value is disabled(2).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), reload(3)  

radiusSrvDefaultPW 1.3.6.1.4.1.272.254.8.1.1.12
This is the default USER-PASSWORD the brick sends where no password is available (for example, in requests for the calling number or boot requests). Some RADIUS servers rely on a configured USER- or CHAP-PASSWORD for any RADIUS request. The default value is an empty string.
OBJECT-TYPE    
  DisplayString  

radiusSrvReloadInterval 1.3.6.1.4.1.272.254.8.1.1.13
Reload interval for RADIUS dialout configuration in minutes. The default is 0 (no reload is performed automatically.
OBJECT-TYPE    
  INTEGER 0..1440  

radiusSrvAuthRequests 1.3.6.1.4.1.272.254.8.1.1.14
Total number of access requests sent.
OBJECT-TYPE    
  Counter  

radiusSrvAuthAccepts 1.3.6.1.4.1.272.254.8.1.1.15
Total number of access accepts received.
OBJECT-TYPE    
  Counter  

radiusSrvAuthRejects 1.3.6.1.4.1.272.254.8.1.1.16
Total number of access rejects received.
OBJECT-TYPE    
  Counter  

radiusSrvAuthReqRetrans 1.3.6.1.4.1.272.254.8.1.1.17
Total number of retransmitted access requests.
OBJECT-TYPE    
  Counter  

radiusSrvAuthReqFailed 1.3.6.1.4.1.272.254.8.1.1.18
Total number of failed (not rejected) access requests.
OBJECT-TYPE    
  Counter  

radiusSrvAuthReqPending 1.3.6.1.4.1.272.254.8.1.1.19
Total number of pending access requests.
OBJECT-TYPE    
  Counter  

radiusSrvAcctStarts 1.3.6.1.4.1.272.254.8.1.1.20
Total number of accounting starts sent.
OBJECT-TYPE    
  Counter  

radiusSrvAcctStops 1.3.6.1.4.1.272.254.8.1.1.21
Total number of accounting stops sent.
OBJECT-TYPE    
  Counter  

radiusSrvKeepalive 1.3.6.1.4.1.272.254.8.1.1.22
Enables the periodicaly keep alive check of 'inactive' (see radiusSrvState) server.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

Defined Objects

RadiusServerEntry  
SEQUENCE    
  INTEGER as radiusSrvProtocol  
  IpAddress as radiusSrvAddress  
  INTEGER as radiusSrvPort  
  DisplayString as radiusSrvSecret  
  INTEGER as radiusSrvPriority  
  INTEGER as radiusSrvTimeout  
  INTEGER as radiusSrvRetries  
  INTEGER as radiusSrvState  
  INTEGER as radiusSrvPolicy  
  INTEGER as radiusSrvValidate  
  INTEGER as radiusSrvDialout  
  DisplayString as radiusSrvDefaultPW  
  INTEGER as radiusSrvReloadInterval  
  Counter as radiusSrvAuthRequests  
  Counter as radiusSrvAuthAccepts  
  Counter as radiusSrvAuthRejects  
  Counter as radiusSrvAuthReqRetrans  
  Counter as radiusSrvAuthReqFailed  
  Counter as radiusSrvAuthReqPending  
  Counter as radiusSrvAcctStarts  
  Counter as radiusSrvAcctStops  
  INTEGER as radiusSrvKeepalive