BLADETYPE2-TRAP-MIB

File: BLADETYPE2-TRAP-MIB.mib (14695 bytes)

Imported modules

RFC1155-SMI RFC-1215 RFC1213-MIB
HP-SWITCH-PL-MIB BLADETYPE2-PHYSICAL-MIB BLADETYPE2-SWITCH-MIB
BLADETYPE2-NETWORK-MIB

Imported symbols

OBJECT-TYPE TRAP-TYPE sysName
sysLocation sysContact DisplayString
hpSwitchBladeType2-Mgmt stgCurCfgIndex agSlotNumber
agRackId agChassis ipCurCfgGwIndex
ipCurCfgGwAddr vrrpCurCfgVirtRtrIndx vrrpCurCfgVirtRtrAddr
vrrpCurCfgIfIndx vrrpCurCfgIfPasswd

Defined Objects

bt2Traps 1.3.6.1.4.1.11.2.3.7.11.33.1.2.7
OBJECT IDENTIFIER    

bt2SwPrimaryPowerSupplyFailure 1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.1
A bt2SwPrimaryPowerSupplyFailure trap signifies that the primary power supply failed.
TRAP-TYPE    

bt2SwDefGwUp 1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.2
A bt2SwDefGwUp trap signifies that the default gateway is alive.
TRAP-TYPE    
  ipCurCfgGwIndex  
  ipCurCfgGwAddr  
  sysName  
  sysLocation  
  sysContact  

bt2SwDefGwDown 1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.3
A bt2SwDefGwDown trap signifies that the default gateway is down.
TRAP-TYPE    
  ipCurCfgGwIndex  
  ipCurCfgGwAddr  
  sysName  
  sysLocation  
  sysContact  

bt2SwDefGwInService 1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.4
A bt2SwDefGwEnabled trap signifies that the default gateway is up and in service.
TRAP-TYPE    
  ipCurCfgGwIndex  
  ipCurCfgGwAddr  
  sysName  
  sysLocation  
  sysContact  

bt2SwDefGwNotInService 1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.5
A bt2SwDefGwDisabled trap signifies that the default gateway is alive but not in service.
TRAP-TYPE    
  ipCurCfgGwIndex  
  ipCurCfgGwAddr  
  sysName  
  sysLocation  
  sysContact  

bt2SwVrrpNewMaster 1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.16
The bt2SwVrrpNewMaster trap indicates that the sending agent has transitioned to 'Master' state.
TRAP-TYPE    
  vrrpCurCfgVirtRtrIndx  
  vrrpCurCfgVirtRtrAddr  
  sysName  
  sysLocation  
  sysContact  

bt2SwVrrpNewBackup 1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.17
The bt2SwVrrpNewBackup trap indicates that the sending agent has transitioned to 'Backup' state.
TRAP-TYPE    
  vrrpCurCfgVirtRtrIndx  
  vrrpCurCfgVirtRtrAddr  
  sysName  
  sysLocation  
  sysContact  

bt2SwVrrpAuthFailure 1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.18
A bt2SwVrrpAuthFailure trap signifies that a packet has been received from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type. Implementation of this trap is optional.
TRAP-TYPE    
  vrrpCurCfgIfIndx  
  vrrpCurCfgIfPasswd  
  sysName  
  sysLocation  
  sysContact  

bt2SwLoginFailure 1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.19
A bt2SwLoginFailure trap signifies that someone failed to enter a valid username/password combination.
TRAP-TYPE    
  bt2SwTrapDisplayString  
  sysName  
  sysLocation  
  sysContact  

bt2SwTempExceedThreshold 1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.22
A bt2SwTempExceedThreshold trap signifies that the switch temperature has exceeded maximum safety limits.
TRAP-TYPE    
  bt2SwTrapDisplayString  
  sysName  
  sysLocation  
  sysContact  

bt2SwRackLocationChange 1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.26
A bt2SwRackLocationChange trap signifies that the rack location has been changed.
TRAP-TYPE    
  agRackId  
  agChassis  
  agSlotNumber  
  sysName  
  sysLocation  
  sysContact  

bt2SwApplyComplete 1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.27
A bt2SwApplyComplete signifies that new configuration has been applied.
TRAP-TYPE    
  bt2SwTrapDisplayString  
  sysName  
  sysLocation  
  sysContact  

bt2SwSaveComplete 1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.28
A bt2SwApplyComplete signifies that new configuration has been saved.
TRAP-TYPE    
  bt2SwTrapDisplayString  
  sysName  
  sysLocation  
  sysContact  

bt2SwFwDownloadSucess 1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.29
A bt2SwFwDownloadSuccess signifies that firmware has been downloaded to [image1|image2|boot image].
TRAP-TYPE    
  bt2SwTrapDisplayString  
  sysName  
  sysLocation  
  sysContact  

bt2SwFwDownloadFailure 1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.30
A bt2SwFwDownloadFailure signifies that firmware downloaded failed to [image1|image2|boot image].
TRAP-TYPE    
  bt2SwTrapDisplayString  
  sysName  
  sysLocation  
  sysContact  

bt2SwTempReturnThreshold 1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.31
A bt2SwTempReturnThreshold trap signifies that the switch temperature has returned below maximum safety limits.
TRAP-TYPE    
  bt2SwTrapDisplayString  
  sysName  
  sysLocation  
  sysContact  

bt2SwFanFailure 1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.32
A bt2SwFanFailure trap signifies that the fan failure has been detected.
TRAP-TYPE    
  bt2SwTrapDisplayString  
  sysName  
  sysLocation  
  sysContact  

bt2SwFanFailureFixed 1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.33
A bt2SwFanFailureFixed trap signifies that the fan failure has been fixed.
TRAP-TYPE    
  bt2SwTrapDisplayString  
  sysName  
  sysLocation  
  sysContact  

bt2SwUfdfoLtMFailure 1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.34
A bt2SwUfdfoLtMFailure trap signifies that a LtM link is down.
TRAP-TYPE    
  bt2SwTrapDisplayString  
  sysName  
  sysLocation  
  sysContact  

bt2SwUfdfoLtMUP 1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.35
A bt2SwUfdfoLtMUP trap signifies that a LtM link is up.
TRAP-TYPE    
  bt2SwTrapDisplayString  
  sysName  
  sysLocation  
  sysContact  

bt2SwUfdfoGlobalEna 1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.36
A bt2SwUfdfoGlobalEna trap signifies that Global UFD is enabled.
TRAP-TYPE    
  bt2SwTrapDisplayString  
  sysName  
  sysLocation  
  sysContact  

bt2SwUfdfoGlobalDis 1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.37
A bt2SwUfdfoGlobalDis trap signifies that Global UFD is disabled.
TRAP-TYPE    
  bt2SwTrapDisplayString  
  sysName  
  sysLocation  
  sysContact  

bt2SwUfdfoLtDAutoEna 1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.38
A bt2SwUfdfoLtDAutoEna trap signifies that a LtD link is Auto Enabled.
TRAP-TYPE    
  bt2SwTrapDisplayString  
  sysName  
  sysLocation  
  sysContact  

bt2SwUfdfoLtDAutoDis 1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.39
A bt2SwUfdfoLtDAutoDis trap signifies that a LtD link is Auto Disabled.
TRAP-TYPE    
  bt2SwTrapDisplayString  
  sysName  
  sysLocation  
  sysContact  

bt2SwCubeInserted 1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.40
A Cube was inserted.
TRAP-TYPE    
  bt2SwTrapDisplayString  
  sysName  
  sysLocation  
  sysContact  

bt2SwCubeRemoved 1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.41
A Cube was removed.
TRAP-TYPE    
  bt2SwTrapDisplayString  
  sysName  
  sysLocation  
  sysContact  

bt2SwStgNewRoot 1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.42
A bt2SwStgNewRoot trap signifies that the bridge has become the new root of the STG.
TRAP-TYPE    
  bt2SwTrapDisplayString  
  stgCurCfgIndex  
  sysName  
  sysLocation  
  sysContact  

bt2SwCistNewRoot 1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.43
A bt2SwCistNewRoot trap signifies that the bridge has become the new root of the CIST.
TRAP-TYPE    
  bt2SwTrapDisplayString  
  sysName  
  sysLocation  
  sysContact  

bt2SwStgTopologyChanged 1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.44
A bt2SwStgTopologyChanged trap signifies that there was a STG topology change.
TRAP-TYPE    
  bt2SwTrapDisplayString  
  stgCurCfgIndex  
  sysName  
  sysLocation  
  sysContact  

bt2SwCistTopologyChanged 1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.45
A bt2SwCistTopologyChanged trap signifies that there was a CIST topology change.
TRAP-TYPE    
  bt2SwTrapDisplayString  
  sysName  
  sysLocation  
  sysContact  

bt2SwHotlinksMasterUp 1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.46
A bt2SwHotlinksMasterUp trap signifies that the Master interface is active.
TRAP-TYPE    
  bt2SwTrapDisplayString  
  sysName  
  sysLocation  
  sysContact  

bt2SwHotlinksMasterDn 1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.47
A bt2SwHotlinksMasterDn trap signifies that the Master interface is not active.
TRAP-TYPE    
  bt2SwTrapDisplayString  
  sysName  
  sysLocation  
  sysContact  

bt2SwHotlinksBackupUp 1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.48
A bt2SwHotlinksBackupUp trap signifies that the Backup interface is active.
TRAP-TYPE    
  bt2SwTrapDisplayString  
  sysName  
  sysLocation  
  sysContact  

bt2SwHotlinksBackupDn 1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.49
A bt2SwHotlinksBackupDn trap signifies that the Backup interface is not active.
TRAP-TYPE    
  bt2SwTrapDisplayString  
  sysName  
  sysLocation  
  sysContact  

bt2SwHotlinksNone 1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.50
A bt2SwHotlinksNone trap signifies that there are no active interfaces.
TRAP-TYPE    
  bt2SwTrapDisplayString  
  sysName  
  sysLocation  
  sysContact  

bt2SwTrapDisplayString 1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.1000
Temporary string object used to store information being sent in an Bladetype2 Switch trap.
OBJECT-TYPE    
  DisplayString SIZE(0..255)