
| C-PRODUCT-GROUP-MIB | RFC1155-SMI | RFC1213-MIB |
| RFC-1212 |
| sys | shelf | card |
| port | circuit | fault |
| IpAddress | DisplayString | PhysAddress |
| OBJECT-TYPE |
| sysGenInfo | 1.3.6.1.4.1.43.1.12.3.1.1.1.1 | ||
| OBJECT IDENTIFIER | |||
| sysGenInfoShelfName | 1.3.6.1.4.1.43.1.12.3.1.1.1.1.1 | ||
| Name of the managed node. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..16) | ||
| sysGenInfoCustomerName | 1.3.6.1.4.1.43.1.12.3.1.1.1.1.2 | ||
| Name of the organization that uses the managed node. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..32) | ||
| sysGenInfoPhoneNumber | 1.3.6.1.4.1.43.1.12.3.1.1.1.1.3 | ||
| Phone number of the organization that uses the managed node. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..32) | ||
| sysGenInfoMaintenanceContact | 1.3.6.1.4.1.43.1.12.3.1.1.1.1.4 | ||
| Maintenance contact of the managed node. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..32) | ||
| sysGenInfoLocation | 1.3.6.1.4.1.43.1.12.3.1.1.1.1.5 | ||
| Location of the managed node. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..32) | ||
| sysGenInfoAutoLogoutTime | 1.3.6.1.4.1.43.1.12.3.1.1.1.1.6 | ||
| The time a TELNET or VT-100 terminal user can maintain a session with the managed node without any keyboard action. Unit: minute | |||
| OBJECT-TYPE | |||
| INTEGER | 1..99 | ||
| sysGenInfoPassword | 1.3.6.1.4.1.43.1.12.3.1.1.1.1.7 | ||
| Password required to access the managed node using VT-100 terminal or TELNET. A get request always returns a NULL string. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(0..16) | ||
| sysGenCurrentCodeRelease | 1.3.6.1.4.1.43.1.12.3.1.1.1.1.8 | ||
| Firmware revision of the current code running in the managed node. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| sysTimeAndDate | 1.3.6.1.4.1.43.1.12.3.1.1.1.2 | ||
| Time and date maintained in the managed node. | |||
| OBJECT-TYPE | |||
| TimeAndDate | |||
| sysIpConfig | 1.3.6.1.4.1.43.1.12.3.1.1.1.3 | ||
| OBJECT IDENTIFIER | |||
| sysIpConfigLocalHost | 1.3.6.1.4.1.43.1.12.3.1.1.1.3.1 | ||
| OBJECT IDENTIFIER | |||
| sysIpConfigLocalHostCommunityName | 1.3.6.1.4.1.43.1.12.3.1.1.1.3.1.1 | ||
| Community name of the managed node. A get request always returns a NULL string. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..64) | ||
| sysIpConfigLocalHostIpAddress | 1.3.6.1.4.1.43.1.12.3.1.1.1.3.1.2 | ||
| Local host's Ethernet IP address. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| sysIpConfigLocalHostSubnetMask | 1.3.6.1.4.1.43.1.12.3.1.1.1.3.1.3 | ||
| Local host's Ethernet IP subnet mask. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| sysIpConfigLocalHostMacAddress | 1.3.6.1.4.1.43.1.12.3.1.1.1.3.1.4 | ||
| Local host's Ethernet MAC-layer address. | |||
| OBJECT-TYPE | |||
| PhysAddress | |||
| sysIpConfigTrapGateway | 1.3.6.1.4.1.43.1.12.3.1.1.1.3.2 | ||
| OBJECT IDENTIFIER | |||
| sysIpConfigTrapGatewayIpAddress | 1.3.6.1.4.1.43.1.12.3.1.1.1.3.2.1 | ||
| Trap gateway's IP address. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| sysIpConfigTrapGatewaySubnetMask | 1.3.6.1.4.1.43.1.12.3.1.1.1.3.2.2 | ||
| Trap gateway's IP subnet mask. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| sysIpConfigTrapClientTable | 1.3.6.1.4.1.43.1.12.3.1.1.1.3.3 | ||
| Trap client table has 4 entries | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SysIpConfigTrapClientEntry | |||
| sysIpConfigTrapClientEntry | 1.3.6.1.4.1.43.1.12.3.1.1.1.3.3.1 | ||
| Each entry contains IP address and port number of an SNMP manager which receives traps from the managed node. | |||
| OBJECT-TYPE | |||
| SysIpConfigTrapClientEntry | |||
| sysIpConfigTrapClientIndex | 1.3.6.1.4.1.43.1.12.3.1.1.1.3.3.1.1 | ||
| OBJECT-TYPE | |||
| INTEGER | 1..4 | ||
| sysIpConfigTrapClientIpAddress | 1.3.6.1.4.1.43.1.12.3.1.1.1.3.3.1.2 | ||
| Trap client's IP address. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| sysIpConfigTrapClientSubnetMask | 1.3.6.1.4.1.43.1.12.3.1.1.1.3.3.1.3 | ||
| Trap client's IP subnet mask. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| sysIpConfigTrapClientPortNumber | 1.3.6.1.4.1.43.1.12.3.1.1.1.3.3.1.4 | ||
| Trap client's port number. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| sysRs232Table | 1.3.6.1.4.1.43.1.12.3.1.1.1.4 | ||
| This table contains 2 rows. The first row shows the physical configuration of the port connected to a VT100 termianl. The second row is used to configure the port which supports SLIP. Access to the first row is read-only and access to the second row is read-write. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SysRs232Entry | |||
| sysRs232Entry | 1.3.6.1.4.1.43.1.12.3.1.1.1.4.1 | ||
| Each entry contains the attributes of a serial port. | |||
| OBJECT-TYPE | |||
| SysRs232Entry | |||
| sysRs232Port | 1.3.6.1.4.1.43.1.12.3.1.1.1.4.1.1 | ||
| The managed node has 2 serial ports: port 1 and port 2. | |||
| OBJECT-TYPE | |||
| INTEGER | port-1(1), port-2(2) | ||
| sysRs232BaudRate | 1.3.6.1.4.1.43.1.12.3.1.1.1.4.1.2 | ||
| Baud rate. The instance of this object in port-1 is read-only. | |||
| OBJECT-TYPE | |||
| INTEGER | br-300(1), br-1200(2), br-2400(3), br-4800(4), br-9600(5), br-19200(6), br-38400(7) | ||
| sysRs232Parity | 1.3.6.1.4.1.43.1.12.3.1.1.1.4.1.3 | ||
| Parity. The instance of this object in port-1 is read-only. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), even(2), odd(3) | ||
| sysRs232DataBits | 1.3.6.1.4.1.43.1.12.3.1.1.1.4.1.4 | ||
| Number of data bits. The instance of this object in port-1 is read-only. | |||
| OBJECT-TYPE | |||
| INTEGER | db-7(1), db-8(2) | ||
| sysRs232StopBits | 1.3.6.1.4.1.43.1.12.3.1.1.1.4.1.5 | ||
| Number of stop bits. The instance of this object in port-1 is read-only. | |||
| OBJECT-TYPE | |||
| INTEGER | sb-1(1), sb-2(2) | ||
| sysRefClock | 1.3.6.1.4.1.43.1.12.3.1.1.1.5 | ||
| System reference clock maintained in the managed node. | |||
| OBJECT-TYPE | |||
| INTEGER | no-clock(1), internal-default(2), internal(3), bits(4), slot-3(5), slot-4(6), slot-5(7), slot-6(8), slot-7(9), slot-8(10), slot-9(11) | ||
| sysProductType | 1.3.6.1.4.1.43.1.12.3.1.1.1.6 | ||
| System Product Type contain type of product. | |||
| OBJECT-TYPE | |||
| INTEGER | no-product(1), ab9600(2), ab9300(3), ab9100(4), mojave(5) | ||
| shelfSerialNumber | 1.3.6.1.4.1.43.1.12.3.1.1.2.1 | ||
| Serial number of the shelf. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(10..10) | ||
| shelfRevision | 1.3.6.1.4.1.43.1.12.3.1.1.2.2 | ||
| Hardware revision number of the shelf. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(1..1) | ||
| shelfPowerSupplyTable | 1.3.6.1.4.1.43.1.12.3.1.1.2.3 | ||
| The power supply table in the shelf. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| ShelfPowerSupplyEntry | |||
| shelfPowerSupplyEntry | 1.3.6.1.4.1.43.1.12.3.1.1.2.3.1 | ||
| Information of the power supply in the shelf. | |||
| OBJECT-TYPE | |||
| ShelfPowerSupplyEntry | |||
| shelfPowerSupplySlot | 1.3.6.1.4.1.43.1.12.3.1.1.2.3.1.1 | ||
| Slot number of the power supply. | |||
| OBJECT-TYPE | |||
| INTEGER | slot-1(1), slot-2(2) | ||
| shelfPowerSupplyAdminStatus | 1.3.6.1.4.1.43.1.12.3.1.1.2.3.1.2 | ||
| Administrative status. | |||
| OBJECT-TYPE | |||
| AdminStatus | |||
| shelfPowerSupplyOperStatus | 1.3.6.1.4.1.43.1.12.3.1.1.2.3.1.3 | ||
| Operational status for Power Supply. In AB9300/AB9100, it doesn't support any setting value. | |||
| OBJECT-TYPE | |||
| INTEGER | out-of-service(1), in-service(2), missing(3) | ||
| shelfPartNumber | 1.3.6.1.4.1.43.1.12.3.1.1.2.4 | ||
| Part number of the shelf. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(1..1) | ||
| cardBaseTable | 1.3.6.1.4.1.43.1.12.3.1.1.3.1 | ||
| A 6 entry card table in the shelf. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| CardBaseEntry | |||
| cardBaseEntry | 1.3.6.1.4.1.43.1.12.3.1.1.3.1.1 | ||
| Each card entry contains objects that refer to the card in that entry. | |||
| OBJECT-TYPE | |||
| CardBaseEntry | |||
| cardSlot | 1.3.6.1.4.1.43.1.12.3.1.1.3.1.1.1 | ||
| Slot number of the card in the shelf. The assignment of the card slots is as follows: slot 1 : management cpu, slot 2 : ctx card, slot 3 : one of the trunk cards (e.g. ds3/oc3/e3/hssi), slot 4-6: one of the port cards (e.g. ether/cbr/qsim). | |||
| OBJECT-TYPE | |||
| INTEGER | 1..6 | ||
| cardTypeDb | 1.3.6.1.4.1.43.1.12.3.1.1.3.1.1.2 | ||
| The configured card type in the slot. It may differ from the actual card type (cardTypeHw) in the corresponding slot. A set request will be accepted only when one of the following is true: 1. the value of cardTypeHw in this slot is none, or 2. the new value of cardTypeDb is the same as the corresponding cardTypeHw. | |||
| OBJECT-TYPE | |||
| CardType | |||
| cardTypeHw | 1.3.6.1.4.1.43.1.12.3.1.1.3.1.1.3 | ||
| The actual card type in the slot. | |||
| OBJECT-TYPE | |||
| CardType | |||
| cardAdminStatus | 1.3.6.1.4.1.43.1.12.3.1.1.3.1.1.4 | ||
| Administrative status of the card. An error is returned if this slot has been selected as the system reference clock and an attempt is made to change this object to out-of-service. This object does not apply to management cpu and ctx card. | |||
| OBJECT-TYPE | |||
| AdminStatus | |||
| cardOperStatus | 1.3.6.1.4.1.43.1.12.3.1.1.3.1.1.5 | ||
| Operational status of the card. | |||
| OBJECT-TYPE | |||
| CardOperStatus | |||
| cardSerialNumber | 1.3.6.1.4.1.43.1.12.3.1.1.3.1.1.6 | ||
| Serial number of the card. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(10..10) | ||
| cardRevision | 1.3.6.1.4.1.43.1.12.3.1.1.3.1.1.7 | ||
| Hardware revision number of the card. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(1..1) | ||
| cardPartNumber | 1.3.6.1.4.1.43.1.12.3.1.1.3.1.1.8 | ||
| Part number of the card. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| cardReset | 1.3.6.1.4.1.43.1.12.3.1.1.3.1.1.9 | ||
| This is the command to reset the card at the specified slot number. A read request always returns 0. Warning: Reseting card will temporarily disrupt traffic on the specified slot number. | |||
| OBJECT-TYPE | |||
| INTEGER | reset(1) | ||
| cardShelfState | 1.3.6.1.4.1.43.1.12.3.1.1.3.1.1.10 | ||
| Operational shelf state of the card. | |||
| OBJECT-TYPE | |||
| CardShelfState | |||
| portBaseTable | 1.3.6.1.4.1.43.1.12.3.1.1.4.1 | ||
| The port information table. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| PortBaseEntry | |||
| portBaseEntry | 1.3.6.1.4.1.43.1.12.3.1.1.4.1.1 | ||
| Each port entry contains objects that refer to the port in that entry. | |||
| OBJECT-TYPE | |||
| PortBaseEntry | |||
| portSlot | 1.3.6.1.4.1.43.1.12.3.1.1.4.1.1.1 | ||
| Slot Number. This table does not have objects for management cpu (slot #1) and ctx card (slot #2). | |||
| OBJECT-TYPE | |||
| INTEGER | 3..6 | ||
| portNumber | 1.3.6.1.4.1.43.1.12.3.1.1.4.1.1.2 | ||
| Port number. The number of ports in each card depends on the type of card in that slot. Following is a list of cards and the port range of that cards: card type port range ----------- ---------- ds3 1..1 ether 1..2 oc3 1..1 hssi 1..1 cbr-dsx-4 1..4 cbr-e1-4 1..4 cbr-dsx-8 1..8 cbr-e1-8 1..8 v-35-qsim 1..4 rs-422-qsim 1..4 hssi-qsim 1..1 e3 1..1 | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| portAdminStatus | 1.3.6.1.4.1.43.1.12.3.1.1.4.1.1.3 | ||
| Administrative status of the port. An error is returned if this port has been selected as the system reference clock and an attempt is made to change this object to out-of-service. | |||
| OBJECT-TYPE | |||
| AdminStatus | |||
| portOperStatus | 1.3.6.1.4.1.43.1.12.3.1.1.4.1.1.4 | ||
| Operational status of the port. | |||
| OBJECT-TYPE | |||
| PortOperStatus | |||
| portIfIndex | 1.3.6.1.4.1.43.1.12.3.1.1.4.1.1.5 | ||
| Currently this object applies to the interface ports in port cards ONLY. It is pre-assigned as following: slot range 3 1..8 4 9..16 5 17..24 6 25..32 7 33..40 8 41..48 9 49..57 | |||
| OBJECT-TYPE | |||
| INTEGER | 1..57 | ||
| vcpNextAvailGlobVcSideId | 1.3.6.1.4.1.43.1.12.3.1.1.5.2 | ||
| This unique value which identified the next available virtual circuit ID. It is allowed NMS manager to get the next available Virtual Circuit Id before created a new row into Virtual circuit Path Table. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2147483647 | ||
| vcpBaseTable | 1.3.6.1.4.1.43.1.12.3.1.1.5.3 | ||
| The base virtual circuit table contains the common information for both sides of circuit. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| VcpBaseEntry | |||
| vcpBaseEntry | 1.3.6.1.4.1.43.1.12.3.1.1.5.3.1 | ||
| Information of the base virtual circuit. | |||
| OBJECT-TYPE | |||
| VcpBaseEntry | |||
| vcpSideAId | 1.3.6.1.4.1.43.1.12.3.1.1.5.3.1.1 | ||
| A unique value which identifies the SideA of circuit. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2147483647 | ||
| vcpSideBId | 1.3.6.1.4.1.43.1.12.3.1.1.5.3.1.2 | ||
| A unique value which identifies the SideB of circuit. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2147483647 | ||
| vcpLinkType | 1.3.6.1.4.1.43.1.12.3.1.1.5.3.1.3 | ||
| Vc Circuit Type indicated whether this circuit is Regular, Multicast, Management, Unicast, leaf. | |||
| OBJECT-TYPE | |||
| VcpLinkType | |||
| vcpDescription | 1.3.6.1.4.1.43.1.12.3.1.1.5.3.1.4 | ||
| Vc description of circuits. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..12) | ||
| vcpAdminStatus | 1.3.6.1.4.1.43.1.12.3.1.1.5.3.1.5 | ||
| Vc administrative status. | |||
| OBJECT-TYPE | |||
| AdminStatus | |||
| vcpRowStatus | 1.3.6.1.4.1.43.1.12.3.1.1.5.3.1.6 | ||
| This object indicates the action to be taken by a set request. | |||
| OBJECT-TYPE | |||
| INTEGER | create(1), delete(2) | ||
| vcpSideTable | 1.3.6.1.4.1.43.1.12.3.1.1.5.4 | ||
| The side table contains the Side A or Side B of circuit information. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| VcpSideEntry | |||
| vcpSideEntry | 1.3.6.1.4.1.43.1.12.3.1.1.5.4.1 | ||
| Information of the base virtual circuit. | |||
| OBJECT-TYPE | |||
| VcpSideEntry | |||
| vcpSideId | 1.3.6.1.4.1.43.1.12.3.1.1.5.4.1.1 | ||
| unique number associated with virtual circuit. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2147483647 | ||
| vcpSideSlot | 1.3.6.1.4.1.43.1.12.3.1.1.5.4.1.2 | ||
| Slot Number. This table does not have objects for ctx card (slot #2) and card (slot #3). | |||
| OBJECT-TYPE | |||
| INTEGER | 1..9 | ||
| vcpSidePort | 1.3.6.1.4.1.43.1.12.3.1.1.5.4.1.3 | ||
| Port number. The number of ports in each card depends on the type of card in that slot. Following is a list of cards and the port range of that cards: card type port range ----------- ---------- mcpu 1..1 ds3 1..1 ether 1..2 oc3 1..1 hssi 1..1 cbr-dsx-4 1..4 cbr-csu-4 1..4 cbr-e1-4 1..4 cbr-dsx-8 1..8 cbr-csu-8 1..8 cbr-e1-8 1..8 v-35-qsim 1..4 rs-422-qsim 1..4 hssi-qsim 1..1 e3 1..1 | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| vcpSideTransmitVpi | 1.3.6.1.4.1.43.1.12.3.1.1.5.4.1.4 | ||
| Port card transmit vpi. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| vcpSideTransmitVci | 1.3.6.1.4.1.43.1.12.3.1.1.5.4.1.5 | ||
| Port card transmit vci. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..16383 | ||
| vcpSideReceiveVpi | 1.3.6.1.4.1.43.1.12.3.1.1.5.4.1.6 | ||
| Port card receive vpi. The value range 0..255 applies when VPI-only translation is requested. Otherwise, its range is 0..15. If the value of an instance of this object is > 15, the value of the corresponding instance of vcPortReceiveVci MUST be 0 (VPI-only translation). | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| vcpSideReceiveVci | 1.3.6.1.4.1.43.1.12.3.1.1.5.4.1.7 | ||
| Port card receive vci. If the value of this object is 0, VPI-only translation is requested. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..1023 | ||
| vcpSidePriority | 1.3.6.1.4.1.43.1.12.3.1.1.5.4.1.8 | ||
| Priority queue is to prioritize the circuit. The smallest number is the highest priority. The largest number is lowest priority. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..4 | ||
| vcpSidePacketDiscard | 1.3.6.1.4.1.43.1.12.3.1.1.5.4.1.9 | ||
| Packet Discard indicates whether this packet needs to drop off based on the threshold. | |||
| OBJECT-TYPE | |||
| VcpPacketDiscard | |||
| vcpMappingSideTable | 1.3.6.1.4.1.43.1.12.3.1.1.5.5 | ||
| The Mapping side table contains circuit Side information. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| VcpMappingSideEntry | |||
| vcpMappingSideEntry | 1.3.6.1.4.1.43.1.12.3.1.1.5.5.1 | ||
| Information of the base virtual circuit. | |||
| OBJECT-TYPE | |||
| VcpMappingSideEntry | |||
| vcpMappingSideSlot | 1.3.6.1.4.1.43.1.12.3.1.1.5.5.1.1 | ||
| Slot Number. This table does not have objects for ctx card (slot #2) and card (slot #3). | |||
| OBJECT-TYPE | |||
| INTEGER | 1..9 | ||
| vcpMappingSidePort | 1.3.6.1.4.1.43.1.12.3.1.1.5.5.1.2 | ||
| Port number. The number of ports in each card depends on the type of card in that slot. Following is a list of cards and the port range of that cards: card type port range ----------- ---------- mcpu 1..1 ds3 1..1 ether 1..2 oc3 1..1 hssi 1..1 cbr-dsx-4 1..4 cbr-csu-4 1..4 cbr-e1-4 1..4 cbr-dsx-8 1..8 cbr-csu-8 1..8 cbr-e1-8 1..8 v-35-qsim 1..4 rs-422-qsim 1..4 hssi-qsim 1..1 e3 1..1 | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| vcpMappingSideAId | 1.3.6.1.4.1.43.1.12.3.1.1.5.5.1.3 | ||
| SideA ID is a unique number associated with virtual circuit. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2147483647 | ||
| vcpMappingSideBId | 1.3.6.1.4.1.43.1.12.3.1.1.5.5.1.4 | ||
| SideB ID is a unique number associated with virtual circuit. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2147483647 | ||
| vcpMappingCardType | 1.3.6.1.4.1.43.1.12.3.1.1.5.5.1.5 | ||
| card Type associated with mySide of circuit. | |||
| OBJECT-TYPE | |||
| CardType | |||
| vcpMappingFamCardType | 1.3.6.1.4.1.43.1.12.3.1.1.5.5.1.6 | ||
| Family Card Type associate with mySide of circuit. | |||
| OBJECT-TYPE | |||
| VcFamilyCardType | |||
| vcpMappingOtherCardType | 1.3.6.1.4.1.43.1.12.3.1.1.5.5.1.7 | ||
| Other Side of Card Type associate with the circuit. | |||
| OBJECT-TYPE | |||
| CardType | |||
| vcpMappingOtherFamCardType | 1.3.6.1.4.1.43.1.12.3.1.1.5.5.1.8 | ||
| Other Side of Family Card Type associate with the circuit. | |||
| OBJECT-TYPE | |||
| VcFamilyCardType | |||
| faultClearCurrentAlarms | 1.3.6.1.4.1.43.1.12.3.1.1.6.1 | ||
| A set request clears all entries in the current alarm table. A get/get-next request returns 0. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| faultClearHistoryAlarms | 1.3.6.1.4.1.43.1.12.3.1.1.6.2 | ||
| A set request clears all entries in the history alarm table. A get/get-next request returns 0. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| faultCurrentAlarmTable | 1.3.6.1.4.1.43.1.12.3.1.1.6.3 | ||
| Current alarm table. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| FaultCurrentAlarmEntry | |||
| faultCurrentAlarmEntry | 1.3.6.1.4.1.43.1.12.3.1.1.6.3.1 | ||
| Each entry in the table contains the information of a currently active alarm. | |||
| OBJECT-TYPE | |||
| FaultCurrentAlarmEntry | |||
| faultCurrentAlarmTag | 1.3.6.1.4.1.43.1.12.3.1.1.6.3.1.1 | ||
| The tag of the alarm in the current alarm table. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| faultCurrentAlarmAlarmType | 1.3.6.1.4.1.43.1.12.3.1.1.6.3.1.2 | ||
| Alarm type. | |||
| OBJECT-TYPE | |||
| AlarmType | |||
| faultCurrentAlarmSeverity | 1.3.6.1.4.1.43.1.12.3.1.1.6.3.1.3 | ||
| Alarm severity. | |||
| OBJECT-TYPE | |||
| INTEGER | minor(2), major(3) | ||
| faultCurrentAlarmCardType | 1.3.6.1.4.1.43.1.12.3.1.1.6.3.1.4 | ||
| Card type of the card which caused the alarm. | |||
| OBJECT-TYPE | |||
| CardType | |||
| faultCurrentAlarmCardNumber | 1.3.6.1.4.1.43.1.12.3.1.1.6.3.1.5 | ||
| Slot number of the card which caused the alarm. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..6 | ||
| faultCurrentAlarmPortNumber | 1.3.6.1.4.1.43.1.12.3.1.1.6.3.1.6 | ||
| The port number of the card which caused the alarm. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..8 | ||
| faultCurrentAlarmSetTime | 1.3.6.1.4.1.43.1.12.3.1.1.6.3.1.7 | ||
| The time when the alarm was set. | |||
| OBJECT-TYPE | |||
| TimeAndDate | |||
| faultCurrentAlarmDescription | 1.3.6.1.4.1.43.1.12.3.1.1.6.3.1.8 | ||
| A readable string which describes the alarm. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| faultHistoryAlarmTable | 1.3.6.1.4.1.43.1.12.3.1.1.6.4 | ||
| History/Information alarm table. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| FaultHistoryAlarmEntry | |||
| faultHistoryAlarmEntry | 1.3.6.1.4.1.43.1.12.3.1.1.6.4.1 | ||
| Each entry in the history alarm table contains either a cleared alarm or an information alarm. | |||
| OBJECT-TYPE | |||
| FaultHistoryAlarmEntry | |||
| faultHistoryAlarmTag | 1.3.6.1.4.1.43.1.12.3.1.1.6.4.1.1 | ||
| The tag of the alarm in the history alarm table. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| faultHistoryAlarmAlarmType | 1.3.6.1.4.1.43.1.12.3.1.1.6.4.1.2 | ||
| Alarm type. | |||
| OBJECT-TYPE | |||
| AlarmType | |||
| faultHistoryAlarmSeverity | 1.3.6.1.4.1.43.1.12.3.1.1.6.4.1.3 | ||
| Severity of the alarm. | |||
| OBJECT-TYPE | |||
| INTEGER | info(1), minor(2), major(3) | ||
| faultHistoryAlarmCardType | 1.3.6.1.4.1.43.1.12.3.1.1.6.4.1.4 | ||
| Card type of the card which caused the alarm. | |||
| OBJECT-TYPE | |||
| CardType | |||
| faultHistoryAlarmCardNumber | 1.3.6.1.4.1.43.1.12.3.1.1.6.4.1.5 | ||
| Slot number of the card which caused the alarm. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..6 | ||
| faultHistoryAlarmPortNumber | 1.3.6.1.4.1.43.1.12.3.1.1.6.4.1.6 | ||
| Port number of the card which caused the alarm. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..8 | ||
| faultHistoryAlarmSetTime | 1.3.6.1.4.1.43.1.12.3.1.1.6.4.1.7 | ||
| The time when the alarm was set. | |||
| OBJECT-TYPE | |||
| TimeAndDate | |||
| faultHistoryAlarmDescription | 1.3.6.1.4.1.43.1.12.3.1.1.6.4.1.8 | ||
| A readable string which describes the alarm. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| faultHistoryAlarmClearTime | 1.3.6.1.4.1.43.1.12.3.1.1.6.4.1.9 | ||
| The time when the alarm was cleared. | |||
| OBJECT-TYPE | |||
| TimeAndDate | |||
| TimeAndDate | |||
| OCTET STRING | SIZE(6..6) | ||
| CardType | |||
| INTEGER | none(1), mcpu(2), ds3(3), ether(4), ctx(5), oc3(6), backplane(7), hssi(8), cbr-dsx-4(9), cbr-e1-4(11), cbr-dsx-8(12), cbr-e1-8(14), unknown(15), v-35-qsim(16), rs-422-qsim(17), hsim(18), e3(19), ima-dsx-8(20), ima-csu-8(21), ima-e1-8(22), ima-dsx-4(23), ima-csu-4(24), ima-e1-4(25), fam-csu-8(26), ctx-plus(27), fam-dsx-8(28), fam-e1-8(29), mojave-backplane(30), ima-4-9300(31), cbr-dsx-3-v35(32), cbr-csu-3-v35(33), cbr-e1-3-v35(34), cbr-dsx-4-9300(35), cbr-csu-4-9300(36), cbr-e1-4-9300(37), ctx-9300(38) | ||
| AdminStatus | |||
| INTEGER | out-of-service(1), in-service(2) | ||
| PortOperStatus | |||
| INTEGER | out-of-service(1), in-service(2), no-response(3), coming-up(4), coming-down(5), status-failed(6) | ||
| CardOperStatus | |||
| INTEGER | out-of-service(1), in-service(2), failed(6) | ||
| CardShelfState | |||
| INTEGER | empty(1), missing(2), match(3), mismatch(4), invalid(5), hwrev-mismatch(6) | ||
| VcpPacketDiscard | |||
| INTEGER | pkt-no(1), pkt-yes(2) | ||
| AlarmType | |||
| INTEGER | los(1), oof(2), ais(3), idle(4), ferf(5), lcd(6), vp-ais(7), vc-ais(8), upload-image-missing(9), card-reconf-ok(10), unknown-db-card-type(11), card-reconf-fail(12), card-mismatch(13), new-card-conf-ok(14), card-conf-fail(15), unknown-card-type(16), card-removed(17), download-fail(18), ps1-missing(19), ps2-missing(20), ps1-fail(21), ps2-fail(22), relay-fuse-fail(23), comm-fail(24), fan1-fail(25), fan2-fail(26), fan3-fail(27), fan4-fail(28), feac-lpbk(29), ntwk-line-lpbk(30), card-lpbk(31), cell-lpbk(32), card-missing(33), card-inited(34), cellbus-parity-fail(35), rx-fifo-overflow(36), tx-fifo-overflow(37), lp-cellbus-congest(38), mp-cellbus-congest(39), hp-cellbus-congest(40), prom-checksum-fail(43), sram-0-fail(44), sram-1-fail(45), sar-sram-fail(46), hdlc-sram-fail(47), mailbox-sram-fail(48), cellbus-xilink-fail(49), prt01-xlnk-fail(50), prt23-xlnk-fail(51), prt45-xlnk-fail(52), prt67-xlnk-fail(53), sar-xlnk-fail(54), port-lpbk-pseudo-fail(55), e1-slot16-ais(56), e1-loss-cas-multifrm(57), fe-e1-loss-cas(58), port-yellow(61), port-ais(62), vc-rdi(64), local-card-lpbk(65), intern-refclk-fail(66), bits-refclk-fail(67), cbr-refclk-fail(68), plcp-refclk-fail(69), loss-of-clock(70), remote-lpbk(71), oc3-refclk-missing(73), power-up(75), loss-cell-del(77), loss-ima-frame(78), loss-diff-sync(79), dup-id(80), bad-ima-id(81), bad-ima-M-value(82), dup-link-id(83), dup-offset(84), test-pattern-fail(85), bad-link-id(86), bad-offset(87), fe-no-links(88), fe-bad-M(89), fe-group-error(90), fe-los-of-signal(91), fe-out-of-frame(92), fe-loss-cell-del(93), fe-loss-of-frame(94), fe-loss-diff-sync(95), fe-misconnected(96), alarm-cleared(102), history-overflow(103), afa-link-removal(104), lmi-link-down(105), link-delay(106), group-no-link(107), group-degraded(108), group-sync-failed(109), sar-init-failure(110) | ||
| VcpLinkType | |||
| INTEGER | vc-invalid(1), vc-regular(2), vc-multicast(3), vc-management(4), vc-leaf(5) | ||
| VcFamilyCardType | |||
| INTEGER | cardFamNone(1), cardFamMCPU(2), cardFamCTX(3), cardFamOC3(4), cardFamDS3(5), cardFamE3(6), cardFamQSIM(7), cardFamFAM(8), cardFamENET(9), cardFamHSSI(10), cardFamCBR(11), cardFamIMA(12), cardFamBackplane(13) | ||
| SysIpConfigTrapClientEntry | |||
| SEQUENCE | |||
| INTEGER as sysIpConfigTrapClientIndex | |||
| IpAddress as sysIpConfigTrapClientIpAddress | |||
| IpAddress as sysIpConfigTrapClientSubnetMask | |||
| INTEGER as sysIpConfigTrapClientPortNumber | |||
| SysRs232Entry | |||
| SEQUENCE | |||
| INTEGER as sysRs232Port | |||
| INTEGER as sysRs232BaudRate | |||
| INTEGER as sysRs232Parity | |||
| INTEGER as sysRs232DataBits | |||
| INTEGER as sysRs232StopBits | |||
| ShelfPowerSupplyEntry | |||
| SEQUENCE | |||
| INTEGER as shelfPowerSupplySlot | |||
| AdminStatus as shelfPowerSupplyAdminStatus | |||
| INTEGER as shelfPowerSupplyOperStatus | |||
| CardBaseEntry | |||
| SEQUENCE | |||
| INTEGER as cardSlot | |||
| CardType as cardTypeDb | |||
| CardType as cardTypeHw | |||
| AdminStatus as cardAdminStatus | |||
| CardOperStatus as cardOperStatus | |||
| OCTET STRING as cardSerialNumber | |||
| OCTET STRING as cardRevision | |||
| DisplayString as cardPartNumber | |||
| INTEGER as cardReset | |||
| CardShelfState as cardShelfState | |||
| PortBaseEntry | |||
| SEQUENCE | |||
| INTEGER as portSlot | |||
| INTEGER as portNumber | |||
| AdminStatus as portAdminStatus | |||
| PortOperStatus as portOperStatus | |||
| INTEGER as portIfIndex | |||
| VcpBaseEntry | |||
| SEQUENCE | |||
| INTEGER as vcpSideAId | |||
| INTEGER as vcpSideBId | |||
| VcpLinkType as vcpLinkType | |||
| DisplayString as vcpDescription | |||
| AdminStatus as vcpAdminStatus | |||
| INTEGER as vcpRowStatus | |||
| VcpSideEntry | |||
| SEQUENCE | |||
| INTEGER as vcpSideId | |||
| INTEGER as vcpSideSlot | |||
| INTEGER as vcpSidePort | |||
| INTEGER as vcpSideTransmitVpi | |||
| INTEGER as vcpSideTransmitVci | |||
| INTEGER as vcpSideReceiveVpi | |||
| INTEGER as vcpSideReceiveVci | |||
| INTEGER as vcpSidePriority | |||
| VcpPacketDiscard as vcpSidePacketDiscard | |||
| VcpMappingSideEntry | |||
| SEQUENCE | |||
| INTEGER as vcpMappingSideSlot | |||
| INTEGER as vcpMappingSidePort | |||
| INTEGER as vcpMappingSideAId | |||
| INTEGER as vcpMappingSideBId | |||
| CardType as vcpMappingCardType | |||
| VcFamilyCardType as vcpMappingFamCardType | |||
| CardType as vcpMappingOtherCardType | |||
| VcFamilyCardType as vcpMappingOtherFamCardType | |||
| FaultCurrentAlarmEntry | |||
| SEQUENCE | |||
| INTEGER as faultCurrentAlarmTag | |||
| AlarmType as faultCurrentAlarmAlarmType | |||
| INTEGER as faultCurrentAlarmSeverity | |||
| CardType as faultCurrentAlarmCardType | |||
| INTEGER as faultCurrentAlarmCardNumber | |||
| INTEGER as faultCurrentAlarmPortNumber | |||
| TimeAndDate as faultCurrentAlarmSetTime | |||
| DisplayString as faultCurrentAlarmDescription | |||
| FaultHistoryAlarmEntry | |||
| SEQUENCE | |||
| INTEGER as faultHistoryAlarmTag | |||
| AlarmType as faultHistoryAlarmAlarmType | |||
| INTEGER as faultHistoryAlarmSeverity | |||
| CardType as faultHistoryAlarmCardType | |||
| INTEGER as faultHistoryAlarmCardNumber | |||
| INTEGER as faultHistoryAlarmPortNumber | |||
| TimeAndDate as faultHistoryAlarmSetTime | |||
| DisplayString as faultHistoryAlarmDescription | |||
| TimeAndDate as faultHistoryAlarmClearTime | |||