CA-W2KOS-MIB

File: CA-W2KOS-MIB.mib (334400 bytes)

Imported modules

RFC-1215 RFC1155-SMI SNMPv2-TC

Imported symbols

TRAP-TYPE enterprises OBJECT-TYPE
DisplayString

Defined Objects

cai 1.3.6.1.4.1.791
OBJECT IDENTIFIER    

caiSysMgr 1.3.6.1.4.1.791.2
OBJECT IDENTIFIER    

tng 1.3.6.1.4.1.791.2.10
OBJECT IDENTIFIER    

agents 1.3.6.1.4.1.791.2.10.2
OBJECT IDENTIFIER    

caiW2kOs 1.3.6.1.4.1.791.2.10.2.43
OBJECT IDENTIFIER    

w2kConfigGroup 1.3.6.1.4.1.791.2.10.2.43.1
OBJECT IDENTIFIER    

w2kConfigGeneralGroup 1.3.6.1.4.1.791.2.10.2.43.1.1
OBJECT IDENTIFIER    

w2kConfigGeneralAgentVersion 1.3.6.1.4.1.791.2.10.2.43.1.1.1
&The currently installed version of the agent.
OBJECT-TYPE    
  DisplayString  

w2kConfigGeneralColdStartTime 1.3.6.1.4.1.791.2.10.2.43.1.1.2
&The date and time that the agent was last started.
OBJECT-TYPE    
  DisplayString  

w2kConfigGeneralWarmStartTime 1.3.6.1.4.1.791.2.10.2.43.1.1.3
&The date and time that the agent's configuration was last changed.
OBJECT-TYPE    
  DisplayString  

w2kConfigGeneralCpuPollTime 1.3.6.1.4.1.791.2.10.2.43.1.1.4
&The date and time that the agent last polled the processor information.
OBJECT-TYPE    
  DisplayString  

w2kConfigGeneralMemPollTime 1.3.6.1.4.1.791.2.10.2.43.1.1.5
&The date and time that the agent last polled the memory information.
OBJECT-TYPE    
  DisplayString  

w2kConfigGeneralLVolPollTime 1.3.6.1.4.1.791.2.10.2.43.1.1.6
&The date and time that the agent last polled the logical volume information.
OBJECT-TYPE    
  DisplayString  

w2kConfigGeneralMntPollTime 1.3.6.1.4.1.791.2.10.2.43.1.1.7
&The date and time that the agent last polled the mounts information.
OBJECT-TYPE    
  DisplayString  

w2kConfigGeneralDfsPollTime 1.3.6.1.4.1.791.2.10.2.43.1.1.8
&The date and time that the agent last polled the distributed file system link information.
OBJECT-TYPE    
  DisplayString  

w2kConfigGeneralQuotPollTime 1.3.6.1.4.1.791.2.10.2.43.1.1.9
&The date and time that the agent last polled the quota information.
OBJECT-TYPE    
  DisplayString  

w2kConfigGeneralDirPollTime 1.3.6.1.4.1.791.2.10.2.43.1.1.10
&The date and time that the agent last polled the directory information.
OBJECT-TYPE    
  DisplayString  

w2kConfigGeneralFilePollTime 1.3.6.1.4.1.791.2.10.2.43.1.1.11
&The date and time that the agent last polled the file information.
OBJECT-TYPE    
  DisplayString  

w2kConfigGeneralProcPollTime 1.3.6.1.4.1.791.2.10.2.43.1.1.12
&The date and time that the agent last polled the process information.
OBJECT-TYPE    
  DisplayString  

w2kConfigGeneralSrvcPollTime 1.3.6.1.4.1.791.2.10.2.43.1.1.13
&The date and time that the agent last polled the service information.
OBJECT-TYPE    
  DisplayString  

w2kConfigGeneralJobPollTime 1.3.6.1.4.1.791.2.10.2.43.1.1.14
&The date and time that the agent last polled the job information.
OBJECT-TYPE    
  DisplayString  

w2kConfigGeneralSessPollTime 1.3.6.1.4.1.791.2.10.2.43.1.1.15
&The date and time that the agent last polled the session information.
OBJECT-TYPE    
  DisplayString  

w2kConfigGeneralPrnPollTime 1.3.6.1.4.1.791.2.10.2.43.1.1.16
&The date and time that the agent last polled the printer information.
OBJECT-TYPE    
  DisplayString  

w2kConfigGeneralNetPollTime 1.3.6.1.4.1.791.2.10.2.43.1.1.17
&The date and time that the agent last polled the network interface information.
OBJECT-TYPE    
  DisplayString  

w2kConfigGeneralRegPollTime 1.3.6.1.4.1.791.2.10.2.43.1.1.18
&The date and time that the agent last polled the registry entry information.
OBJECT-TYPE    
  DisplayString  

w2kConfigSysGroup 1.3.6.1.4.1.791.2.10.2.43.1.2
OBJECT IDENTIFIER    

w2kConfigSysNodeName 1.3.6.1.4.1.791.2.10.2.43.1.2.1
&The node name of the system.
OBJECT-TYPE    
  DisplayString  

w2kConfigSysVersion 1.3.6.1.4.1.791.2.10.2.43.1.2.2
&The OS version (build, service pack, etc.) of the system.
OBJECT-TYPE    
  DisplayString  

w2kConfigSysBios 1.3.6.1.4.1.791.2.10.2.43.1.2.3
&The BIOS version (date, revision, etc.) of the system.
OBJECT-TYPE    
  DisplayString  

w2kConfigSysColdStartTime 1.3.6.1.4.1.791.2.10.2.43.1.2.4
&The date and time that the system was last started.
OBJECT-TYPE    
  DisplayString  

w2kConfigCpuGroup 1.3.6.1.4.1.791.2.10.2.43.1.3
OBJECT IDENTIFIER    

w2kConfigCpuPollInterval 1.3.6.1.4.1.791.2.10.2.43.1.3.1
&The time (in seconds) between the polling of the processor information. Valid values are greater than or equal to 30.
OBJECT-TYPE    
  INTEGER  

w2kConfigCpuPollMethod 1.3.6.1.4.1.791.2.10.2.43.1.3.2
&If set to 'disabled', the agent no more retrieves the processor information (not by polling, nor by get request) and sets all statuses to ok. If set to 'poll-interval-only', the agent only retrieves the information by polling, but not by get request. If set to 'poll-interval-and-query', the agent retrieves the information in both cases (polling and get request). If set to 'query-only', the agent retrieves the information for get requests only.
OBJECT-TYPE    
  INTEGER disabled(1), poll-interval-only(2), poll-interval-and-query(3), query-only(4)  

w2kConfigCpuLoadLag 1.3.6.1.4.1.791.2.10.2.43.1.3.3
&The number of consecutive poll intervals that the threshold has to be (b)reached before the status changes. Valid values are greater than 0.
OBJECT-TYPE    
  INTEGER  

w2kConfigCpuLoadWarn 1.3.6.1.4.1.791.2.10.2.43.1.3.4
&Warning threshold for the utilization of the processor (as percentage value of 100). Valid values are 1 to 99 and smaller than the critical threshold.
OBJECT-TYPE    
  INTEGER  

w2kConfigCpuLoadCrit 1.3.6.1.4.1.791.2.10.2.43.1.3.5
&Critical threshold for the utilization of the processor (as percentage value of 100). Valid values are 2 to 100 and greater than the warning threshold.
OBJECT-TYPE    
  INTEGER  

w2kConfigCpuLoadMonitor 1.3.6.1.4.1.791.2.10.2.43.1.3.6
&Flag indicating whether the utilization of the processor should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigCpuLossAction 1.3.6.1.4.1.791.2.10.2.43.1.3.7
&Flag defining the severity if the loss of the processor is detected or whether to remove this watcher in that case.
OBJECT-TYPE    
  INTEGER remove(1), up(2), down-warning(3), down-critical(4)  

w2kConfigMemGroup 1.3.6.1.4.1.791.2.10.2.43.1.4
OBJECT IDENTIFIER    

w2kConfigMemPollInterval 1.3.6.1.4.1.791.2.10.2.43.1.4.1
&The time (in seconds) between the polling of the memory information. Valid values are greater than or equal to 30.
OBJECT-TYPE    
  INTEGER  

w2kConfigMemPollMethod 1.3.6.1.4.1.791.2.10.2.43.1.4.2
&If set to 'disabled', the agent no more retrieves the memory information (not by polling, nor by get request) and sets all statuses to ok. If set to 'poll-interval-only', the agent only retrieves the information by polling, but not by get request. If set to 'poll-interval-and-query', the agent retrieves the information in both cases (polling and get request). If set to 'query-only', the agent retrieves the information for get requests only.
OBJECT-TYPE    
  INTEGER disabled(1), poll-interval-only(2), poll-interval-and-query(3), query-only(4)  

w2kConfigLVolGroup 1.3.6.1.4.1.791.2.10.2.43.1.5
OBJECT IDENTIFIER    

w2kConfigLVolPollInterval 1.3.6.1.4.1.791.2.10.2.43.1.5.1
&The time (in seconds) between the polling of the logical volume information. Valid values are greater than or equal to 30.
OBJECT-TYPE    
  INTEGER  

w2kConfigLVolPollMethod 1.3.6.1.4.1.791.2.10.2.43.1.5.2
&If set to 'disabled', the agent no more retrieves the logical volume information (not by polling, nor by get request) and sets all statuses to ok. If set to 'poll-interval-only', the agent only retrieves the information by polling, but not by get request. If set to 'poll-interval-and-query', the agent retrieves the information in both cases (polling and get request). If set to 'query-only', the agent retrieves the information for get requests only.
OBJECT-TYPE    
  INTEGER disabled(1), poll-interval-only(2), poll-interval-and-query(3), query-only(4)  

w2kConfigLVolAutoPollInterval 1.3.6.1.4.1.791.2.10.2.43.1.5.3
&The time (in minutes), when a new auto discovery process is started. Valid values are greater than or equal to 30 or set to -1. If set to -1, auto discovery of logical volumes will no more be made.
OBJECT-TYPE    
  INTEGER  

w2kConfigLVolFragPollInterval 1.3.6.1.4.1.791.2.10.2.43.1.5.4
&The time (in hours), when the fragmentation determination of the watched logical volumes is started again (triggered by the next polling or a get request). The agent will not determine the fragmentation every standard poll interval, because it is a long lasting task. Valid values are greater than or equal to 1 or set to -1. After a set on this attribute, the fragmentation determination will be started new by the next polling or by a get request. If set to -1, the fragmentation is no more polled.
OBJECT-TYPE    
  INTEGER  

w2kConfigLVolName 1.3.6.1.4.1.791.2.10.2.43.1.5.5
&Name of the watcher to be added/removed, monitoring a logical volume with this name. If adding an auto discovery watcher, this name can be a wildcarded logical volume name filtering the logical volumes to be auto discovered (any backslash in the wildcarded name must be doubled). For each auto discovered logical volume a watcher will be created. Important: This name is case insensitive.
OBJECT-TYPE    
  DisplayString  

w2kConfigLVolDescription 1.3.6.1.4.1.791.2.10.2.43.1.5.6
&Any description for this watcher.
OBJECT-TYPE    
  DisplayString  

w2kConfigLVolAggLag 1.3.6.1.4.1.791.2.10.2.43.1.5.7
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
OBJECT-TYPE    
  INTEGER  

w2kConfigLVolSizeWarn 1.3.6.1.4.1.791.2.10.2.43.1.5.8
&Warning threshold in megabytes, either for the free (by appending a 'F') or for the used logical volume size. The used size can also be defined as a percentage value of the total logical volume size (by appending a '%'). Valid values are greater than 0 and smaller (in case of 'free' greater) than the critical threshold.
OBJECT-TYPE    
  DisplayString  

w2kConfigLVolSizeCrit 1.3.6.1.4.1.791.2.10.2.43.1.5.9
&Critical threshold in megabytes, either for the free (by appending a 'F') or for the used logical volume size. The used size can also be defined as a percentage value of the total logical volume size (by appending a '%'). Valid values are greater than 1 and greater (in case of 'free' smaller) than the warning threshold.
OBJECT-TYPE    
  DisplayString  

w2kConfigLVolSizeMonitor 1.3.6.1.4.1.791.2.10.2.43.1.5.10
&Flag indicating whether the used logical volume size should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigLVolSizeDWarn 1.3.6.1.4.1.791.2.10.2.43.1.5.11
&Warning threshold, either for the growth (by appending a '+') or for the shrinkage (by appending a '-') or for the absolute delta in used logical volume size monitored in one poll interval. Growth, shrinkage and absolute delta can be given in megabytes or as a percentage value of the total logical volume size (by appending a '%'). Valid values are greater than 0 and smaller than the critical threshold.
OBJECT-TYPE    
  DisplayString  

w2kConfigLVolSizeDCrit 1.3.6.1.4.1.791.2.10.2.43.1.5.12
&Critical threshold, either for the growth (by appending a '+') or for the shrinkage (by appending a '-') or for the absolute delta in used logical volume size monitored in one poll interval. Growth, shrinkage and absolute delta can be given in megabytes or as a percentage value of the total logical volume size (by appending a '%'). Valid values are greater than 1 and greater than the warning threshold.
OBJECT-TYPE    
  DisplayString  

w2kConfigLVolSizeDMonitor 1.3.6.1.4.1.791.2.10.2.43.1.5.13
&Flag indicating whether the delta in used logical volume size should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigLVolTPutWarn 1.3.6.1.4.1.791.2.10.2.43.1.5.14
&Warning threshold for the throughput rate (kilobytes per second). Valid values are greater than 0 and smaller than the critical threshold.
OBJECT-TYPE    
  INTEGER  

w2kConfigLVolTPutCrit 1.3.6.1.4.1.791.2.10.2.43.1.5.15
&Critical threshold for the throughput rate (kilobytes per second). Valid values are greater than 1 and greater than the warning threshold.
OBJECT-TYPE    
  INTEGER  

w2kConfigLVolTPutMonitor 1.3.6.1.4.1.791.2.10.2.43.1.5.16
&Flag indicating whether the throughput rate should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigLVolFragWarn 1.3.6.1.4.1.791.2.10.2.43.1.5.17
&Warning threshold for the file fragmentation (as percentage value of 100). Valid values are 1 to 99 and smaller than the critical threshold.
OBJECT-TYPE    
  INTEGER  

w2kConfigLVolFragCrit 1.3.6.1.4.1.791.2.10.2.43.1.5.18
&Critical threshold for the file fragmentation (as percentage value of 100). Valid values are 2 to 100 and greater than the warning threshold.
OBJECT-TYPE    
  INTEGER  

w2kConfigLVolFragMonitor 1.3.6.1.4.1.791.2.10.2.43.1.5.19
&Flag indicating whether the file fragmentation should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigLVolLossAction 1.3.6.1.4.1.791.2.10.2.43.1.5.20
&Flag defining the severity if the loss of the logical volume is detected or whether to remove this watcher in that case.
OBJECT-TYPE    
  INTEGER remove(1), up(2), down-warning(3), down-critical(4)  

w2kConfigLVolAutoTableWatcherName 1.3.6.1.4.1.791.2.10.2.43.1.5.21
&Name of the watcher to be added in the auto discovery table.
OBJECT-TYPE    
  DisplayString  

w2kConfigLVolButton 1.3.6.1.4.1.791.2.10.2.43.1.5.22
&This attribute is used to add or remove a watcher with the current value of the watcher name attribute in this group, or to add or remove an auto discovery watcher with the current value of the auto table watcher name attribute in this group.
OBJECT-TYPE    
  INTEGER none(1), add(2), remove(3), add-auto(4), remove-auto(5)  

w2kConfigLVolAutoTable 1.3.6.1.4.1.791.2.10.2.43.1.5.23
&A table containing all auto discovery watchers for logical volumes.
OBJECT-TYPE    
  SEQUENCE OF  
    W2kConfigLVolAutoRow

w2kConfigLVolAutoEntry 1.3.6.1.4.1.791.2.10.2.43.1.5.23.1
&The table entry.
OBJECT-TYPE    
  W2kConfigLVolAutoRow  

w2kConfigLVolAutoWatcherName 1.3.6.1.4.1.791.2.10.2.43.1.5.23.1.1
&Name of the auto discovery watcher.
OBJECT-TYPE    
  DisplayString  

w2kConfigLVolAutoName 1.3.6.1.4.1.791.2.10.2.43.1.5.23.1.2
&Wildcarded logical volume name filtering the logical volumes to be auto discovered (any backslash in the wildcarded name must be doubled). For each auto discovered logical volume a watcher will be created. Important: This name is case insensitive.
OBJECT-TYPE    
  DisplayString  

w2kConfigLVolAutoDescription 1.3.6.1.4.1.791.2.10.2.43.1.5.23.1.3
&Default for auto discovered logical volumes.
OBJECT-TYPE    
  DisplayString  

w2kConfigLVolAutoAggLag 1.3.6.1.4.1.791.2.10.2.43.1.5.23.1.4
&Default for auto discovered logical volumes.
OBJECT-TYPE    
  INTEGER  

w2kConfigLVolAutoSizeWarn 1.3.6.1.4.1.791.2.10.2.43.1.5.23.1.5
&Default for auto discovered logical volumes.
OBJECT-TYPE    
  DisplayString  

w2kConfigLVolAutoSizeCrit 1.3.6.1.4.1.791.2.10.2.43.1.5.23.1.6
&Default for auto discovered logical volumes.
OBJECT-TYPE    
  DisplayString  

w2kConfigLVolAutoSizeMonitor 1.3.6.1.4.1.791.2.10.2.43.1.5.23.1.7
&Default for auto discovered logical volumes.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigLVolAutoSizeDWarn 1.3.6.1.4.1.791.2.10.2.43.1.5.23.1.8
&Default for auto discovered logical volumes.
OBJECT-TYPE    
  DisplayString  

w2kConfigLVolAutoSizeDCrit 1.3.6.1.4.1.791.2.10.2.43.1.5.23.1.9
&Default for auto discovered logical volumes.
OBJECT-TYPE    
  DisplayString  

w2kConfigLVolAutoSizeDMonitor 1.3.6.1.4.1.791.2.10.2.43.1.5.23.1.10
&Default for auto discovered logical volumes.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigLVolAutoTPutWarn 1.3.6.1.4.1.791.2.10.2.43.1.5.23.1.11
&Default for auto discovered logical volumes.
OBJECT-TYPE    
  INTEGER  

w2kConfigLVolAutoTPutCrit 1.3.6.1.4.1.791.2.10.2.43.1.5.23.1.12
&Default for auto discovered logical volumes.
OBJECT-TYPE    
  INTEGER  

w2kConfigLVolAutoTPutMonitor 1.3.6.1.4.1.791.2.10.2.43.1.5.23.1.13
&Default for auto discovered logical volumes.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigLVolAutoFragWarn 1.3.6.1.4.1.791.2.10.2.43.1.5.23.1.14
&Default for auto discovered logical volumes.
OBJECT-TYPE    
  INTEGER  

w2kConfigLVolAutoFragCrit 1.3.6.1.4.1.791.2.10.2.43.1.5.23.1.15
&Default for auto discovered logical volumes.
OBJECT-TYPE    
  INTEGER  

w2kConfigLVolAutoFragMonitor 1.3.6.1.4.1.791.2.10.2.43.1.5.23.1.16
&Default for auto discovered logical volumes.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigLVolAutoLossAction 1.3.6.1.4.1.791.2.10.2.43.1.5.23.1.17
&Default for auto discovered logical volumes.
OBJECT-TYPE    
  INTEGER remove(1), up(2), down-warning(3), down-critical(4)  

w2kConfigLVolAutoButton 1.3.6.1.4.1.791.2.10.2.43.1.5.23.1.18
&This attribute is used to remove this auto discovery watcher.
OBJECT-TYPE    
  INTEGER none(1), remove(2)  

w2kConfigMntGroup 1.3.6.1.4.1.791.2.10.2.43.1.6
OBJECT IDENTIFIER    

w2kConfigMntPollInterval 1.3.6.1.4.1.791.2.10.2.43.1.6.1
&The time (in seconds) between the polling of the mount information. Valid values are greater than or equal to 30.
OBJECT-TYPE    
  INTEGER  

w2kConfigMntPollMethod 1.3.6.1.4.1.791.2.10.2.43.1.6.2
&If set to 'disabled', the agent no more retrieves the mount information (not by polling, nor by get request) and sets all statuses to ok. If set to 'poll-interval-only', the agent only retrieves the information by polling, but not by get request. If set to 'poll-interval-and-query', the agent retrieves the information in both cases (polling and get request). If set to 'query-only', the agent retrieves the information for get requests only.
OBJECT-TYPE    
  INTEGER disabled(1), poll-interval-only(2), poll-interval-and-query(3), query-only(4)  

w2kConfigMntAutoPollInterval 1.3.6.1.4.1.791.2.10.2.43.1.6.3
&The time (in minutes), when a new auto discovery process is started. Valid values are greater than or equal to 30 or set to -1. If set to -1, auto discovery of mounts will no more be made.
OBJECT-TYPE    
  INTEGER  

w2kConfigMntName 1.3.6.1.4.1.791.2.10.2.43.1.6.4
&Name of the watcher to be added/removed, monitoring a mount with this name. If adding an auto discovery watcher, this name can be a wildcarded mount name filtering the mounts to be auto discovered (any backslash in the wildcarded name must be doubled). For each auto discovered mount a watcher will be created. Important: This name is case insensitive.
OBJECT-TYPE    
  DisplayString  

w2kConfigMntDescription 1.3.6.1.4.1.791.2.10.2.43.1.6.5
&Any description for this watcher.
OBJECT-TYPE    
  DisplayString  

w2kConfigMntAggLag 1.3.6.1.4.1.791.2.10.2.43.1.6.6
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
OBJECT-TYPE    
  INTEGER  

w2kConfigMntRelToMonitor 1.3.6.1.4.1.791.2.10.2.43.1.6.7
&Flag indicating whether a change of the logical volume, mounted by this mount, should be monitored and if so, the level of alert to raise. Note: A change will not occur if the related logical volume is lossed. In that case the mount itself becomes lossed.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kConfigMntLossAction 1.3.6.1.4.1.791.2.10.2.43.1.6.8
&Flag defining the severity if the loss of the mount is detected or whether to remove this watcher in that case.
OBJECT-TYPE    
  INTEGER remove(1), up(2), down-warning(3), down-critical(4)  

w2kConfigMntAutoTableWatcherName 1.3.6.1.4.1.791.2.10.2.43.1.6.9
&Name of the watcher to be added in the auto discovery table.
OBJECT-TYPE    
  DisplayString  

w2kConfigMntButton 1.3.6.1.4.1.791.2.10.2.43.1.6.10
&This attribute is used to add or remove a watcher with the current value of the watcher name attribute in this group, or to add or remove an auto discovery watcher with the current value of the auto table watcher name attribute in this group.
OBJECT-TYPE    
  INTEGER none(1), add(2), remove(3), add-auto(4), remove-auto(5)  

w2kConfigMntAutoTable 1.3.6.1.4.1.791.2.10.2.43.1.6.11
&A table containing all auto discovery watchers for mounts.
OBJECT-TYPE    
  SEQUENCE OF  
    W2kConfigMntAutoRow

w2kConfigMntAutoEntry 1.3.6.1.4.1.791.2.10.2.43.1.6.11.1
&The table entry.
OBJECT-TYPE    
  W2kConfigMntAutoRow  

w2kConfigMntAutoWatcherName 1.3.6.1.4.1.791.2.10.2.43.1.6.11.1.1
&Name of the auto discovery watcher.
OBJECT-TYPE    
  DisplayString  

w2kConfigMntAutoName 1.3.6.1.4.1.791.2.10.2.43.1.6.11.1.2
&Wildcarded mount name filtering the mounts to be auto discovered (any backslash in the wildcarded name must be doubled). For each auto discovered mount a watcher will be created. Important: This name is case insensitive.
OBJECT-TYPE    
  DisplayString  

w2kConfigMntAutoDescription 1.3.6.1.4.1.791.2.10.2.43.1.6.11.1.3
&Default for auto discovered mounts.
OBJECT-TYPE    
  DisplayString  

w2kConfigMntAutoAggLag 1.3.6.1.4.1.791.2.10.2.43.1.6.11.1.4
&Default for auto discovered mounts.
OBJECT-TYPE    
  INTEGER  

w2kConfigMntAutoRelToMonitor 1.3.6.1.4.1.791.2.10.2.43.1.6.11.1.5
&Default for auto discovered mounts.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kConfigMntAutoLossAction 1.3.6.1.4.1.791.2.10.2.43.1.6.11.1.6
&Default for auto discovered mounts.
OBJECT-TYPE    
  INTEGER remove(1), up(2), down-warning(3), down-critical(4)  

w2kConfigMntAutoButton 1.3.6.1.4.1.791.2.10.2.43.1.6.11.1.9
&This attribute is used to remove this auto discovery watcher.
OBJECT-TYPE    
  INTEGER none(1), remove(2)  

w2kConfigDfsGroup 1.3.6.1.4.1.791.2.10.2.43.1.7
OBJECT IDENTIFIER    

w2kConfigDfsPollInterval 1.3.6.1.4.1.791.2.10.2.43.1.7.1
&The time (in seconds) between the polling of the distributed file system link information. Valid values are greater than or equal to 30.
OBJECT-TYPE    
  INTEGER  

w2kConfigDfsPollMethod 1.3.6.1.4.1.791.2.10.2.43.1.7.2
&If set to 'disabled', the agent no more retrieves the distributed file system link information (not by polling, nor by get request) and sets all statuses to ok. If set to 'poll-interval-only', the agent only retrieves the information by polling, but not by get request. If set to 'poll-interval-and-query', the agent retrieves the information in both cases (polling and get request). If set to 'query-only', the agent retrieves the information for get requests only.
OBJECT-TYPE    
  INTEGER disabled(1), poll-interval-only(2), poll-interval-and-query(3), query-only(4)  

w2kConfigDfsAutoPollInterval 1.3.6.1.4.1.791.2.10.2.43.1.7.3
&The time (in minutes), when a new auto discovery process is started. Valid values are greater than or equal to 30 or set to -1. If set to -1, auto discovery of distributed file system links will no more be made.
OBJECT-TYPE    
  INTEGER  

w2kConfigDfsName 1.3.6.1.4.1.791.2.10.2.43.1.7.4
&Name of the watcher to be added/removed, monitoring a distributed file system link with this name. The name consists of the Dfs root name followed by the Dfs link name. These two names are concatenated by a back-slash. The single Dfs root name (without '\DfsLinkName') can also be used as watcher name, to be able to monitor all Dfs links of a Dfs root. In that case no loss action will be triggered if no Dfs link exists. If adding an auto discovery watcher, this name can be a wildcarded Dfs link name filtering the Dfs links to be auto discovered (any backslash in the wildcarded name must be doubled). For each auto discovered Dfs link a watcher will be created. Important: This name is case insensitive.
OBJECT-TYPE    
  DisplayString  

w2kConfigDfsDescription 1.3.6.1.4.1.791.2.10.2.43.1.7.5
&Any description for this watcher.
OBJECT-TYPE    
  DisplayString  

w2kConfigDfsAggLag 1.3.6.1.4.1.791.2.10.2.43.1.7.6
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
OBJECT-TYPE    
  INTEGER  

w2kConfigDfsReplicaWarn 1.3.6.1.4.1.791.2.10.2.43.1.7.7
&Warning threshold for the number of unavailable replicas of the distributed file system link. Valid values are greater than 0 and smaller than the critical threshold.
OBJECT-TYPE    
  INTEGER  

w2kConfigDfsReplicaCrit 1.3.6.1.4.1.791.2.10.2.43.1.7.8
&Critical threshold for the number of unavailable replicas of the distributed file system link. Valid values are greater than 1 and greater than the warning threshold.
OBJECT-TYPE    
  INTEGER  

w2kConfigDfsReplicaMonitor 1.3.6.1.4.1.791.2.10.2.43.1.7.9
&Flag indicating whether the unavailable replicas should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigDfsLossAction 1.3.6.1.4.1.791.2.10.2.43.1.7.10
&Flag defining the severity if the loss of the distributed file system link is detected or whether to remove this watcher in that case.
OBJECT-TYPE    
  INTEGER remove(1), up(2), down-warning(3), down-critical(4)  

w2kConfigDfsAutoTableWatcherName 1.3.6.1.4.1.791.2.10.2.43.1.7.11
&Name of the watcher to be added in the auto discovery table.
OBJECT-TYPE    
  DisplayString  

w2kConfigDfsButton 1.3.6.1.4.1.791.2.10.2.43.1.7.12
&This attribute is used to add or remove a watcher with the current value of the watcher name attribute in this group, or to add or remove an auto discovery watcher with the current value of the auto table watcher name attribute in this group.
OBJECT-TYPE    
  INTEGER none(1), add(2), remove(3), add-auto(4), remove-auto(5)  

w2kConfigDfsAutoTable 1.3.6.1.4.1.791.2.10.2.43.1.7.13
&A table containing all auto discovery watchers for distributed file system links.
OBJECT-TYPE    
  SEQUENCE OF  
    W2kConfigDfsAutoRow

w2kConfigDfsAutoEntry 1.3.6.1.4.1.791.2.10.2.43.1.7.13.1
&The table entry.
OBJECT-TYPE    
  W2kConfigDfsAutoRow  

w2kConfigDfsAutoWatcherName 1.3.6.1.4.1.791.2.10.2.43.1.7.13.1.1
&Name of the auto discovery watcher.
OBJECT-TYPE    
  DisplayString  

w2kConfigDfsAutoName 1.3.6.1.4.1.791.2.10.2.43.1.7.13.1.2
&Wildcarded distributed file system link name filtering the Dfs links to be auto discovered (any backslash in the wildcarded name must be doubled). For each auto discovered Dfs link a watcher will be created. Important: This name is case insensitive.
OBJECT-TYPE    
  DisplayString  

w2kConfigDfsAutoDescription 1.3.6.1.4.1.791.2.10.2.43.1.7.13.1.3
&Default for auto discovered distributed file system links.
OBJECT-TYPE    
  DisplayString  

w2kConfigDfsAutoAggLag 1.3.6.1.4.1.791.2.10.2.43.1.7.13.1.4
&Default for auto discovered distributed file system links.
OBJECT-TYPE    
  INTEGER  

w2kConfigDfsAutoReplicaWarn 1.3.6.1.4.1.791.2.10.2.43.1.7.13.1.5
&Default for auto discovered distributed file system links.
OBJECT-TYPE    
  INTEGER  

w2kConfigDfsAutoReplicaCrit 1.3.6.1.4.1.791.2.10.2.43.1.7.13.1.6
&Default for auto discovered distributed file system links.
OBJECT-TYPE    
  INTEGER  

w2kConfigDfsAutoReplicaMonitor 1.3.6.1.4.1.791.2.10.2.43.1.7.13.1.7
&Default for auto discovered distributed file system links.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigDfsAutoLossAction 1.3.6.1.4.1.791.2.10.2.43.1.7.13.1.8
&Default for auto discovered distributed file system links.
OBJECT-TYPE    
  INTEGER remove(1), up(2), down-warning(3), down-critical(4)  

w2kConfigDfsAutoButton 1.3.6.1.4.1.791.2.10.2.43.1.7.13.1.9
&This attribute is used to remove this auto discovery watcher.
OBJECT-TYPE    
  INTEGER none(1), remove(2)  

w2kConfigQuotGroup 1.3.6.1.4.1.791.2.10.2.43.1.8
OBJECT IDENTIFIER    

w2kConfigQuotPollInterval 1.3.6.1.4.1.791.2.10.2.43.1.8.1
&The time (in seconds) between the polling of the quota information. Valid values are greater than or equal to 30.
OBJECT-TYPE    
  INTEGER  

w2kConfigQuotPollMethod 1.3.6.1.4.1.791.2.10.2.43.1.8.2
&If set to 'disabled', the agent no more retrieves the quota information (not by polling, nor by get request) and sets all statuses to ok. If set to 'poll-interval-only', the agent only retrieves the information by polling, but not by get request. If set to 'poll-interval-and-query', the agent retrieves the information in both cases (polling and get request). If set to 'query-only', the agent retrieves the information for get requests only.
OBJECT-TYPE    
  INTEGER disabled(1), poll-interval-only(2), poll-interval-and-query(3), query-only(4)  

w2kConfigQuotLVolName 1.3.6.1.4.1.791.2.10.2.43.1.8.3
&Logical volume name of the watcher to be added/removed, monitoring a quota with this logical volume name. The name specifies the logical volume on which this quota exists. Important: This name is case insensitive.
OBJECT-TYPE    
  DisplayString  

w2kConfigQuotUserName 1.3.6.1.4.1.791.2.10.2.43.1.8.4
&User name of the watcher to be added/removed, monitoring a quota with this user name. The name specifies the user for whom this quota exists and is in the form 'domainName\userName' or 'userName@domainName'. Important: This name is case insensitive.
OBJECT-TYPE    
  DisplayString  

w2kConfigQuotDescription 1.3.6.1.4.1.791.2.10.2.43.1.8.5
&Any description for this watcher.
OBJECT-TYPE    
  DisplayString  

w2kConfigQuotAggLag 1.3.6.1.4.1.791.2.10.2.43.1.8.6
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
OBJECT-TYPE    
  INTEGER  

w2kConfigQuotExist 1.3.6.1.4.1.791.2.10.2.43.1.8.7
&Flag indicating whether to raise an alert if a quota is existent or if it is not-existent.
OBJECT-TYPE    
  INTEGER should-exist(1), should-not-exist(2)  

w2kConfigQuotExistMonitor 1.3.6.1.4.1.791.2.10.2.43.1.8.8
&Flag indicating whether the existence of the quota should be monitored and if so, the level of alert to raise.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kConfigQuotSizeWarn 1.3.6.1.4.1.791.2.10.2.43.1.8.9
&Warning threshold for the used quota size in kilobytes. Valid values are greater than 0 and smaller than the critical threshold.
OBJECT-TYPE    
  INTEGER  

w2kConfigQuotSizeCrit 1.3.6.1.4.1.791.2.10.2.43.1.8.10
&Critical threshold for the used quota size in kilobytes. Valid values are greater than 1 and greater than the warning threshold.
OBJECT-TYPE    
  INTEGER  

w2kConfigQuotSizeMonitor 1.3.6.1.4.1.791.2.10.2.43.1.8.11
&Flag indicating whether the used quota size should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigQuotButton 1.3.6.1.4.1.791.2.10.2.43.1.8.12
&This attribute is used to add or remove a watcher with the current value of the watcher name attribute in this group.
OBJECT-TYPE    
  INTEGER none(1), add(2), remove(3)  

w2kConfigDirGroup 1.3.6.1.4.1.791.2.10.2.43.1.9
OBJECT IDENTIFIER    

w2kConfigDirPollInterval 1.3.6.1.4.1.791.2.10.2.43.1.9.1
&The time (in seconds) between the polling of the directory information. Valid values are greater than or equal to 30.
OBJECT-TYPE    
  INTEGER  

w2kConfigDirPollMethod 1.3.6.1.4.1.791.2.10.2.43.1.9.2
&If set to 'disabled', the agent no more retrieves the directory information (not by polling, nor by get request) and sets all statuses to ok. If set to 'poll-interval-only', the agent only retrieves the information by polling, but not by get request. If set to 'poll-interval-and-query', the agent retrieves the information in both cases (polling and get request). If set to 'query-only', the agent retrieves the information for get requests only.
OBJECT-TYPE    
  INTEGER disabled(1), poll-interval-only(2), poll-interval-and-query(3), query-only(4)  

w2kConfigDirName 1.3.6.1.4.1.791.2.10.2.43.1.9.3
&Name of the watcher to be added/removed, monitoring a directory with this name. Important: This name is case insensitive.
OBJECT-TYPE    
  DisplayString  

w2kConfigDirDescription 1.3.6.1.4.1.791.2.10.2.43.1.9.4
&Any description for this watcher.
OBJECT-TYPE    
  DisplayString  

w2kConfigDirAggLag 1.3.6.1.4.1.791.2.10.2.43.1.9.5
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
OBJECT-TYPE    
  INTEGER  

w2kConfigDirExist 1.3.6.1.4.1.791.2.10.2.43.1.9.6
&Flag indicating whether to raise an alert if a directory is existent or if it is not-existent.
OBJECT-TYPE    
  INTEGER should-exist(1), should-not-exist(2)  

w2kConfigDirExistMonitor 1.3.6.1.4.1.791.2.10.2.43.1.9.7
&Flag indicating whether the existence of the directory should be monitored and if so, the level of alert to raise.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kConfigDirTimeMonitor 1.3.6.1.4.1.791.2.10.2.43.1.9.8
&Flag indicating whether the latest timestamp (of all files and all subfolders, including the given folder) should be monitored and if so, the level of alert to raise.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kConfigDirSizeWarn 1.3.6.1.4.1.791.2.10.2.43.1.9.9
&Warning threshold for the total directory size (all files in the given folder and in all subfolders), either in kilobytes or as a percentage value of the original size (by appending a '%'). The original size is the size when this watcher was created. Valid values are greater than 0 and smaller than the critical threshold.
OBJECT-TYPE    
  DisplayString  

w2kConfigDirSizeCrit 1.3.6.1.4.1.791.2.10.2.43.1.9.10
&Critical threshold for the total directory size (all files in the given folder and in all subfolders), either in kilobytes or as a percentage value of the original size (by appending a '%'). The original size is the size when this watcher was created. Valid values are greater than 1 and greater than the warning threshold.
OBJECT-TYPE    
  DisplayString  

w2kConfigDirSizeMonitor 1.3.6.1.4.1.791.2.10.2.43.1.9.11
&Flag indicating whether the total directory size should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigDirSizeDWarn 1.3.6.1.4.1.791.2.10.2.43.1.9.12
&Warning threshold, either for the growth (by appending a '+') or for the shrinkage (by appending a '-') or for the absolute delta in total directory size monitored in one poll interval. Growth, shrinkage and absolute delta can be given in kilobytes or as a percentage value of the total directory size (by appending a '%'). Valid values are greater than 0 and smaller than the critical threshold.
OBJECT-TYPE    
  DisplayString  

w2kConfigDirSizeDCrit 1.3.6.1.4.1.791.2.10.2.43.1.9.13
&Critical threshold, either for the growth (by appending a '+') or for the shrinkage (by appending a '-') or for the absolute delta in total directory size monitored in one poll interval. Growth, shrinkage and absolute delta can be given in kilobytes or as a percentage value of the total directory size (by appending a '%'). Valid values are greater than 1 and greater than the warning threshold.
OBJECT-TYPE    
  DisplayString  

w2kConfigDirSizeDMonitor 1.3.6.1.4.1.791.2.10.2.43.1.9.14
&Flag indicating whether the delta in total directory size should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigDirEntryWarn 1.3.6.1.4.1.791.2.10.2.43.1.9.15
&Warning threshold for the number of entries (sum of files and folders in the given folder and in all subfolders). Valid values are greater than 0 and smaller than the critical threshold.
OBJECT-TYPE    
  INTEGER  

w2kConfigDirEntryCrit 1.3.6.1.4.1.791.2.10.2.43.1.9.16
&Critical threshold for the number of entries (sum of files and folders in the given folder and in all subfolders). Valid values are greater than 1 and greater than the warning threshold.
OBJECT-TYPE    
  INTEGER  

w2kConfigDirEntryMonitor 1.3.6.1.4.1.791.2.10.2.43.1.9.17
&Flag indicating whether the number of entries should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigDirButton 1.3.6.1.4.1.791.2.10.2.43.1.9.18
&This attribute is used to add or remove a watcher with the current value of the watcher name attribute in this group.
OBJECT-TYPE    
  INTEGER none(1), add(2), remove(3)  

w2kConfigFileGroup 1.3.6.1.4.1.791.2.10.2.43.1.10
OBJECT IDENTIFIER    

w2kConfigFilePollInterval 1.3.6.1.4.1.791.2.10.2.43.1.10.1
&The time (in seconds) between the polling of the file information. Valid values are greater than or equal to 30.
OBJECT-TYPE    
  INTEGER  

w2kConfigFilePollMethod 1.3.6.1.4.1.791.2.10.2.43.1.10.2
&If set to 'disabled', the agent no more retrieves the file information (not by polling, nor by get request) and sets all statuses to ok. If set to 'poll-interval-only', the agent only retrieves the information by polling, but not by get request. If set to 'poll-interval-and-query', the agent retrieves the information in both cases (polling and get request). If set to 'query-only', the agent retrieves the information for get requests only.
OBJECT-TYPE    
  INTEGER disabled(1), poll-interval-only(2), poll-interval-and-query(3), query-only(4)  

w2kConfigFileName 1.3.6.1.4.1.791.2.10.2.43.1.10.3
&Name of the watcher to be added/removed, monitoring a file with this name. Important: This name is case insensitive.
OBJECT-TYPE    
  DisplayString  

w2kConfigFileDescription 1.3.6.1.4.1.791.2.10.2.43.1.10.4
&Any description for this watcher.
OBJECT-TYPE    
  DisplayString  

w2kConfigFileAggLag 1.3.6.1.4.1.791.2.10.2.43.1.10.5
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
OBJECT-TYPE    
  INTEGER  

w2kConfigFileExist 1.3.6.1.4.1.791.2.10.2.43.1.10.6
&Flag indicating whether to raise an alert if a file is existent or if it is not-existent.
OBJECT-TYPE    
  INTEGER should-exist(1), should-not-exist(2)  

w2kConfigFileExistMonitor 1.3.6.1.4.1.791.2.10.2.43.1.10.7
&Flag indicating whether the existence of the file should be monitored and if so, the level of alert to raise.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kConfigFileTimeMonitor 1.3.6.1.4.1.791.2.10.2.43.1.10.8
&Flag indicating whether the timestamp of the file should be monitored and if so, the level of alert to raise.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kConfigFileSizeWarn 1.3.6.1.4.1.791.2.10.2.43.1.10.9
&Warning threshold for the file size, either in kilobytes or as a percentage value of the original size (by appending a '%'). The original size is the size when this watcher was created. Valid values are greater than 0 and smaller than the critical threshold.
OBJECT-TYPE    
  DisplayString  

w2kConfigFileSizeCrit 1.3.6.1.4.1.791.2.10.2.43.1.10.10
&Critical threshold for the file size, either in kilobytes or as a percentage value of the original size (by appending a '%'). The original size is the size when this watcher was created. Valid values are greater than 1 and greater than the warning threshold.
OBJECT-TYPE    
  DisplayString  

w2kConfigFileSizeMonitor 1.3.6.1.4.1.791.2.10.2.43.1.10.11
&Flag indicating whether the file size should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigFileSizeDWarn 1.3.6.1.4.1.791.2.10.2.43.1.10.12
&Warning threshold, either for the growth (by appending a '+') or for the shrinkage (by appending a '-') or for the absolute delta in file size monitored in one poll interval. Growth, shrinkage and absolute delta can be given in kilobytes or as a percentage value of the file size (by appending a '%'). Valid values are greater than 0 and smaller than the critical threshold.
OBJECT-TYPE    
  DisplayString  

w2kConfigFileSizeDCrit 1.3.6.1.4.1.791.2.10.2.43.1.10.13
&Critical threshold, either for the growth (by appending a '+') or for the shrinkage (by appending a '-') or for the absolute delta in file size monitored in one poll interval. Growth, shrinkage and absolute delta can be given in kilobytes or as a percentage value of the file size (by appending a '%'). Valid values are greater than 1 and greater than the warning threshold.
OBJECT-TYPE    
  DisplayString  

w2kConfigFileSizeDMonitor 1.3.6.1.4.1.791.2.10.2.43.1.10.14
&Flag indicating whether the delta in file size should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigFileButton 1.3.6.1.4.1.791.2.10.2.43.1.10.15
&This attribute is used to add or remove a watcher with the current value of the watcher name attribute in this group.
OBJECT-TYPE    
  INTEGER none(1), add(2), remove(3)  

w2kConfigProcGroup 1.3.6.1.4.1.791.2.10.2.43.1.11
OBJECT IDENTIFIER    

w2kConfigProcPollInterval 1.3.6.1.4.1.791.2.10.2.43.1.11.1
&The time (in seconds) between the polling of the process information. Valid values are greater than or equal to 30.
OBJECT-TYPE    
  INTEGER  

w2kConfigProcPollMethod 1.3.6.1.4.1.791.2.10.2.43.1.11.2
&If set to 'disabled', the agent no more retrieves the process information (not by polling, nor by get request) and sets all statuses to ok. If set to 'poll-interval-only', the agent only retrieves the information by polling, but not by get request. If set to 'poll-interval-and-query', the agent retrieves the information in both cases (polling and get request). If set to 'query-only', the agent retrieves the information for get requests only.
OBJECT-TYPE    
  INTEGER disabled(1), poll-interval-only(2), poll-interval-and-query(3), query-only(4)  

w2kConfigProcProcName 1.3.6.1.4.1.791.2.10.2.43.1.11.3
&Process name of the watcher to be added/removed, monitoring a process with this process name. An asterisk '*' can be used as process name or can be prepended/appended to it, in order to widen the scope of processes this watcher monitors. Important: This name is case insensitive.
OBJECT-TYPE    
  DisplayString  

w2kConfigProcPathName 1.3.6.1.4.1.791.2.10.2.43.1.11.4
&Path name of the watcher to be added/removed, monitoring a process with this path name. An asterisk '*' can be used as path name or can be prepended/appended to it, in order to widen the scope of processes this watcher monitors. Important: This name is case insensitive.
OBJECT-TYPE    
  DisplayString  

w2kConfigProcUserName 1.3.6.1.4.1.791.2.10.2.43.1.11.5
&User name of the watcher to be added/removed, monitoring a process started by this user. An asterisk '*' can be used as user name or can be prepended/appended to it, in order to widen the scope of processes this watcher monitors. Important: This name is case insensitive.
OBJECT-TYPE    
  DisplayString  

w2kConfigProcDescription 1.3.6.1.4.1.791.2.10.2.43.1.11.6
&Any description for this watcher.
OBJECT-TYPE    
  DisplayString  

w2kConfigProcAggLag 1.3.6.1.4.1.791.2.10.2.43.1.11.7
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
OBJECT-TYPE    
  INTEGER  

w2kConfigProcInstMin 1.3.6.1.4.1.791.2.10.2.43.1.11.8
&Minimum threshold for the number of process instances. Valid values are greater than or equal to -1 and smaller than or equal to the maximum threshold. Setting to -1 disables the monitoring of the minimum.
OBJECT-TYPE    
  INTEGER  

w2kConfigProcInstMax 1.3.6.1.4.1.791.2.10.2.43.1.11.9
&Maximum threshold for the number of process instances. Valid values are greater than or equal to -1 and greater than or equal to the minimum threshold. Setting to -1 disables the monitoring of the maximum.
OBJECT-TYPE    
  INTEGER  

w2kConfigProcInstMonitor 1.3.6.1.4.1.791.2.10.2.43.1.11.10
&Flag indicating whether the number of process instances should be monitored and if so, the level of alert to raise.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kConfigProcChildMin 1.3.6.1.4.1.791.2.10.2.43.1.11.11
&Minimum threshold for the number of childprocesses of the process. If there is more than one process instance, the minimum of all instances is compared with this value. Valid values are greater than or equal to -1 and smaller than or equal to the maximum threshold. Setting to -1 disables the monitoring of the minimum.
OBJECT-TYPE    
  INTEGER  

w2kConfigProcChildMax 1.3.6.1.4.1.791.2.10.2.43.1.11.12
&Maximum threshold for the number of childprocesses of the process. If there is more than one process instance, the maximum of all instances is compared with this value. Valid values are greater than or equal to -1 and greater than or equal to the minimum threshold. Setting to -1 disables the monitoring of the maximum.
OBJECT-TYPE    
  INTEGER  

w2kConfigProcChildMonitor 1.3.6.1.4.1.791.2.10.2.43.1.11.13
&Flag indicating whether the number of childprocesses of the process should be monitored and if so, the level of alert to raise. Note: This metric decreases agent performance much more than any other metric. For this reason the default is 'do-not-monitor'.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kConfigProcThreadMin 1.3.6.1.4.1.791.2.10.2.43.1.11.14
&Minimum threshold for the number of threads of the process. If there is more than one process instance, the minimum of all instances is compared with this value. Valid values are greater than or equal to -1 and smaller than or equal to the maximum threshold. Setting to -1 disables the monitoring of the minimum.
OBJECT-TYPE    
  INTEGER  

w2kConfigProcThreadMax 1.3.6.1.4.1.791.2.10.2.43.1.11.15
&Maximum threshold for the number of threads of the process. If there is more than one process instance, the maximum of all instances is compared with this value. Valid values are greater than or equal to -1 and greater than or equal to the minimum threshold. Setting to -1 disables the monitoring of the maximum.
OBJECT-TYPE    
  INTEGER  

w2kConfigProcThreadMonitor 1.3.6.1.4.1.791.2.10.2.43.1.11.16
&Flag indicating whether the number of threads of the process should be monitored and if so, the level of alert to raise.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kConfigProcMemoryWarn 1.3.6.1.4.1.791.2.10.2.43.1.11.17
&Warning threshold for the memory usage of the process (in kilobytes). If there is more than one process instance, the maximum of all instances is compared with this value. Valid values are greater than 0 and smaller than the critical threshold.
OBJECT-TYPE    
  INTEGER  

w2kConfigProcMemoryCrit 1.3.6.1.4.1.791.2.10.2.43.1.11.18
&Critical threshold for the memory usage of the process (in kilobytes). If there is more than one process instance, the maximum of all instances is compared with this value. Valid values are greater than 1 and greater than the warning threshold.
OBJECT-TYPE    
  INTEGER  

w2kConfigProcMemoryMonitor 1.3.6.1.4.1.791.2.10.2.43.1.11.19
&Flag indicating whether the memory usage of the process should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigProcCpuWarn 1.3.6.1.4.1.791.2.10.2.43.1.11.20
&Warning threshold for the CPU usage of the process (as percentage value of 100). If there is more than one process instance, the maximum of all instances is compared with this value. Valid values are 1 to 99 and smaller than the critical threshold.
OBJECT-TYPE    
  INTEGER  

w2kConfigProcCpuCrit 1.3.6.1.4.1.791.2.10.2.43.1.11.21
&Critical threshold for the CPU usage of the process (as percentage value of 100). If there is more than one process instance, the maximum of all instances is compared with this value. Valid values are 2 to 100 and greater than the warning threshold.
OBJECT-TYPE    
  INTEGER  

w2kConfigProcCpuMonitor 1.3.6.1.4.1.791.2.10.2.43.1.11.22
&Flag indicating whether the CPU usage of the process should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigProcButton 1.3.6.1.4.1.791.2.10.2.43.1.11.23
&This attribute is used to add or remove a watcher with the current value of the watcher name attribute in this group.
OBJECT-TYPE    
  INTEGER none(1), add(2), remove(3)  

w2kConfigSrvcGroup 1.3.6.1.4.1.791.2.10.2.43.1.12
OBJECT IDENTIFIER    

w2kConfigSrvcPollInterval 1.3.6.1.4.1.791.2.10.2.43.1.12.1
&The time (in seconds) between the polling of the service information. Valid values are greater than or equal to 30.
OBJECT-TYPE    
  INTEGER  

w2kConfigSrvcPollMethod 1.3.6.1.4.1.791.2.10.2.43.1.12.2
&If set to 'disabled', the agent no more retrieves the service information (not by polling, nor by get request) and sets all statuses to ok. If set to 'poll-interval-only', the agent only retrieves the information by polling, but not by get request. If set to 'poll-interval-and-query', the agent retrieves the information in both cases (polling and get request). If set to 'query-only', the agent retrieves the information for get requests only.
OBJECT-TYPE    
  INTEGER disabled(1), poll-interval-only(2), poll-interval-and-query(3), query-only(4)  

w2kConfigSrvcAutoPollInterval 1.3.6.1.4.1.791.2.10.2.43.1.12.3
&The time (in minutes), when a new auto discovery process is started. Valid values are greater than or equal to 30 or set to -1. If set to -1, auto discovery of services will no more be made.
OBJECT-TYPE    
  INTEGER  

w2kConfigSrvcName 1.3.6.1.4.1.791.2.10.2.43.1.12.4
&Name of the watcher to be added/removed, monitoring a service with this name. If adding an auto discovery watcher, this name can be a wildcarded service name filtering the services to be auto discovered (any backslash in the wildcarded name must be doubled). For each auto discovered service a watcher will be created. Important: This name is case insensitive.
OBJECT-TYPE    
  DisplayString  

w2kConfigSrvcDescription 1.3.6.1.4.1.791.2.10.2.43.1.12.5
&Any description for this watcher.
OBJECT-TYPE    
  DisplayString  

w2kConfigSrvcAggLag 1.3.6.1.4.1.791.2.10.2.43.1.12.6
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
OBJECT-TYPE    
  INTEGER  

w2kConfigSrvcExist 1.3.6.1.4.1.791.2.10.2.43.1.12.7
&Flag indicating whether to raise an alert if a service is existent or if it is not-existent.
OBJECT-TYPE    
  INTEGER should-exist(1), should-not-exist(2)  

w2kConfigSrvcExistMonitor 1.3.6.1.4.1.791.2.10.2.43.1.12.8
&Flag indicating whether the existence of the service should be monitored and if so, the level of alert to raise.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kConfigSrvcActive 1.3.6.1.4.1.791.2.10.2.43.1.12.9
&Flag indicating whether to raise an alert if an existent service is active or if it is inactive.
OBJECT-TYPE    
  INTEGER should-be-active(1), should-not-be-active(2)  

w2kConfigSrvcActiveMonitor 1.3.6.1.4.1.791.2.10.2.43.1.12.10
&Flag indicating whether the activity of the service should be monitored and if so, the level of alert to raise.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kConfigSrvcAutoTableWatcherName 1.3.6.1.4.1.791.2.10.2.43.1.12.11
&Name of the watcher to be added in the auto discovery table.
OBJECT-TYPE    
  DisplayString  

w2kConfigSrvcButton 1.3.6.1.4.1.791.2.10.2.43.1.12.12
&This attribute is used to add or remove a watcher with the current value of the watcher name attribute in this group, or to add or remove an auto discovery watcher with the current value of the auto table watcher name attribute in this group.
OBJECT-TYPE    
  INTEGER none(1), add(2), remove(3), add-auto(4), remove-auto(5)  

w2kConfigSrvcAutoTable 1.3.6.1.4.1.791.2.10.2.43.1.12.13
&A table containing all auto discovery watchers for services.
OBJECT-TYPE    
  SEQUENCE OF  
    W2kConfigSrvcAutoRow

w2kConfigSrvcAutoEntry 1.3.6.1.4.1.791.2.10.2.43.1.12.13.1
&The table entry.
OBJECT-TYPE    
  W2kConfigSrvcAutoRow  

w2kConfigSrvcAutoWatcherName 1.3.6.1.4.1.791.2.10.2.43.1.12.13.1.1
&Name of the auto discovery watcher.
OBJECT-TYPE    
  DisplayString  

w2kConfigSrvcAutoName 1.3.6.1.4.1.791.2.10.2.43.1.12.13.1.2
&Wildcarded service name filtering the services to be auto discovered (any backslash in the wildcarded name must be doubled). For each auto discovered service a watcher will be created. Important: This name is case insensitive.
OBJECT-TYPE    
  DisplayString  

w2kConfigSrvcAutoDescription 1.3.6.1.4.1.791.2.10.2.43.1.12.13.1.3
&Default for auto discovered services.
OBJECT-TYPE    
  DisplayString  

w2kConfigSrvcAutoAggLag 1.3.6.1.4.1.791.2.10.2.43.1.12.13.1.4
&Default for auto discovered services.
OBJECT-TYPE    
  INTEGER  

w2kConfigSrvcAutoExist 1.3.6.1.4.1.791.2.10.2.43.1.12.13.1.5
&Default for auto discovered services.
OBJECT-TYPE    
  INTEGER should-exist(1), should-not-exist(2)  

w2kConfigSrvcAutoExistMonitor 1.3.6.1.4.1.791.2.10.2.43.1.12.13.1.6
&Default for auto discovered services.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kConfigSrvcAutoActive 1.3.6.1.4.1.791.2.10.2.43.1.12.13.1.7
&Default for auto discovered services.
OBJECT-TYPE    
  INTEGER should-be-active(1), should-not-be-active(2)  

w2kConfigSrvcAutoActiveMonitor 1.3.6.1.4.1.791.2.10.2.43.1.12.13.1.8
&Default for auto discovered services.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kConfigSrvcAutoButton 1.3.6.1.4.1.791.2.10.2.43.1.12.13.1.9
&This attribute is used to remove this auto discovery watcher.
OBJECT-TYPE    
  INTEGER none(1), remove(2)  

w2kConfigJobGroup 1.3.6.1.4.1.791.2.10.2.43.1.13
OBJECT IDENTIFIER    

w2kConfigJobPollInterval 1.3.6.1.4.1.791.2.10.2.43.1.13.1
&The time (in seconds) between the polling of the job information. Valid values are greater than or equal to 30.
OBJECT-TYPE    
  INTEGER  

w2kConfigJobPollMethod 1.3.6.1.4.1.791.2.10.2.43.1.13.2
&If set to 'disabled', the agent no more retrieves the job information (not by polling, nor by get request) and sets all statuses to ok. If set to 'poll-interval-only', the agent only retrieves the information by polling, but not by get request. If set to 'poll-interval-and-query', the agent retrieves the information in both cases (polling and get request). If set to 'query-only', the agent retrieves the information for get requests only.
OBJECT-TYPE    
  INTEGER disabled(1), poll-interval-only(2), poll-interval-and-query(3), query-only(4)  

w2kConfigJobName 1.3.6.1.4.1.791.2.10.2.43.1.13.3
&Name of the watcher to be added/removed, monitoring a job with this name. Important: This name is case insensitive.
OBJECT-TYPE    
  DisplayString  

w2kConfigJobDescription 1.3.6.1.4.1.791.2.10.2.43.1.13.4
&Any description for this watcher.
OBJECT-TYPE    
  DisplayString  

w2kConfigJobAggLag 1.3.6.1.4.1.791.2.10.2.43.1.13.5
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
OBJECT-TYPE    
  INTEGER  

w2kConfigJobExist 1.3.6.1.4.1.791.2.10.2.43.1.13.6
&Flag indicating whether to raise an alert if a job is existent or if it is not-existent.
OBJECT-TYPE    
  INTEGER should-exist(1), should-not-exist(2)  

w2kConfigJobExistMonitor 1.3.6.1.4.1.791.2.10.2.43.1.13.7
&Flag indicating whether the existence of the job should be monitored and if so, the level of alert to raise.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kConfigJobProcessMin 1.3.6.1.4.1.791.2.10.2.43.1.13.8
&Minimum threshold for the number of active processes associated with the job. Valid values are greater than or equal to -1 and smaller than or equal to the maximum threshold. Setting to -1 disables the monitoring of the minimum.
OBJECT-TYPE    
  INTEGER  

w2kConfigJobProcessMax 1.3.6.1.4.1.791.2.10.2.43.1.13.9
&Maximum threshold for the number of active processes associated with the job. Valid values are greater than or equal to -1 and greater than or equal to the minimum threshold. Setting to -1 disables the monitoring of the maximum.
OBJECT-TYPE    
  INTEGER  

w2kConfigJobProcessMonitor 1.3.6.1.4.1.791.2.10.2.43.1.13.10
&Flag indicating whether the number of active processes associated with the job should be monitored and if so, the level of alert to raise.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kConfigJobCpuWarn 1.3.6.1.4.1.791.2.10.2.43.1.13.11
&Warning threshold for the CPU usage of the job (as percentage value of 100). Valid values are 1 to 99 and smaller than the critical threshold.
OBJECT-TYPE    
  INTEGER  

w2kConfigJobCpuCrit 1.3.6.1.4.1.791.2.10.2.43.1.13.12
&Critical threshold for the CPU usage of the job (as percentage value of 100). Valid values are 2 to 100 and greater than the warning threshold.
OBJECT-TYPE    
  INTEGER  

w2kConfigJobCpuMonitor 1.3.6.1.4.1.791.2.10.2.43.1.13.13
&Flag indicating whether the CPU usage of the job should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigJobButton 1.3.6.1.4.1.791.2.10.2.43.1.13.14
&This attribute is used to add or remove a watcher with the current value of the watcher name attribute in this group.
OBJECT-TYPE    
  INTEGER none(1), add(2), remove(3)  

w2kConfigSessGroup 1.3.6.1.4.1.791.2.10.2.43.1.14
OBJECT IDENTIFIER    

w2kConfigSessPollInterval 1.3.6.1.4.1.791.2.10.2.43.1.14.1
&The time (in seconds) between the polling of the session information. Valid values are greater than or equal to 30.
OBJECT-TYPE    
  INTEGER  

w2kConfigSessPollMethod 1.3.6.1.4.1.791.2.10.2.43.1.14.2
&If set to 'disabled', the agent no more retrieves the session information (not by polling, nor by get request) and sets all statuses to ok. If set to 'poll-interval-only', the agent only retrieves the information by polling, but not by get request. If set to 'poll-interval-and-query', the agent retrieves the information in both cases (polling and get request). If set to 'query-only', the agent retrieves the information for get requests only.
OBJECT-TYPE    
  INTEGER disabled(1), poll-interval-only(2), poll-interval-and-query(3), query-only(4)  

w2kConfigSessClientName 1.3.6.1.4.1.791.2.10.2.43.1.14.3
&Client name of the watcher to be added/removed, monitoring a session with this client name. The client name is the name of the host, from where this session was initiated. An asterisk '*' can be used as client name or can be prepended/appended to it, in order to widen the scope of sessions this watcher monitors. Important: This name is case insensitive.
OBJECT-TYPE    
  DisplayString  

w2kConfigSessUserName 1.3.6.1.4.1.791.2.10.2.43.1.14.4
&User name of the watcher to be added/removed, monitoring a session with this user name. The user name specifies the user, who logged in and is in the form 'domainName\userName'. An asterisk '*' can be used as user name or can be prepended/appended to it, in order to widen the scope of sessions this watcher monitors. Important: This name is case insensitive.
OBJECT-TYPE    
  DisplayString  

w2kConfigSessDescription 1.3.6.1.4.1.791.2.10.2.43.1.14.5
&Any description for this watcher.
OBJECT-TYPE    
  DisplayString  

w2kConfigSessAggLag 1.3.6.1.4.1.791.2.10.2.43.1.14.6
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
OBJECT-TYPE    
  INTEGER  

w2kConfigSessInstMin 1.3.6.1.4.1.791.2.10.2.43.1.14.7
&Minimum threshold for the number of session instances. Valid values are greater than or equal to -1 and smaller than or equal to the maximum threshold. Setting to -1 disables the monitoring of the minimum.
OBJECT-TYPE    
  INTEGER  

w2kConfigSessInstMax 1.3.6.1.4.1.791.2.10.2.43.1.14.8
&Maximum threshold for the number of session instances. Valid values are greater than or equal to -1 and greater than or equal to the minimum threshold. Setting to -1 disables the monitoring of the maximum.
OBJECT-TYPE    
  INTEGER  

w2kConfigSessInstMonitor 1.3.6.1.4.1.791.2.10.2.43.1.14.9
&Flag indicating whether the number of session instances should be monitored and if so, the level of alert to raise.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kConfigSessMemoryWarn 1.3.6.1.4.1.791.2.10.2.43.1.14.10
&Warning threshold for the memory usage of the session (in kilobytes). If there is more than one session instance, the maximum of all instances is compared with this value. Valid values are greater than 0 and smaller than the critical threshold.
OBJECT-TYPE    
  INTEGER  

w2kConfigSessMemoryCrit 1.3.6.1.4.1.791.2.10.2.43.1.14.11
&Critical threshold for the memory usage of the session (in kilobytes). If there is more than one session instance, the maximum of all instances is compared with this value. Valid values are greater than 1 and greater than the warning threshold.
OBJECT-TYPE    
  INTEGER  

w2kConfigSessMemoryMonitor 1.3.6.1.4.1.791.2.10.2.43.1.14.12
&Flag indicating whether the memory usage of the session should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigSessCpuWarn 1.3.6.1.4.1.791.2.10.2.43.1.14.13
&Warning threshold for the CPU usage of the session (as percentage value of 100). If there is more than one session instance, the maximum of all instances is compared with this value. Valid values are 1 to 99 and smaller than the critical threshold.
OBJECT-TYPE    
  INTEGER  

w2kConfigSessCpuCrit 1.3.6.1.4.1.791.2.10.2.43.1.14.14
&Critical threshold for the CPU usage of the session (as percentage value of 100). If there is more than one session instance, the maximum of all instances is compared with this value. Valid values are 2 to 100 and greater than the warning threshold.
OBJECT-TYPE    
  INTEGER  

w2kConfigSessCpuMonitor 1.3.6.1.4.1.791.2.10.2.43.1.14.15
&Flag indicating whether the CPU usage of the session should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigSessButton 1.3.6.1.4.1.791.2.10.2.43.1.14.16
&This attribute is used to add or remove a watcher with the current value of the watcher name attribute in this group.
OBJECT-TYPE    
  INTEGER none(1), add(2), remove(3)  

w2kConfigPrnGroup 1.3.6.1.4.1.791.2.10.2.43.1.15
OBJECT IDENTIFIER    

w2kConfigPrnPollInterval 1.3.6.1.4.1.791.2.10.2.43.1.15.1
&The time (in seconds) between the polling of the printer information. Valid values are greater than or equal to 30.
OBJECT-TYPE    
  INTEGER  

w2kConfigPrnPollMethod 1.3.6.1.4.1.791.2.10.2.43.1.15.2
&If set to 'disabled', the agent no more retrieves the printer information (not by polling, nor by get request) and sets all statuses to ok. If set to 'poll-interval-only', the agent only retrieves the information by polling, but not by get request. If set to 'poll-interval-and-query', the agent retrieves the information in both cases (polling and get request). If set to 'query-only', the agent retrieves the information for get requests only.
OBJECT-TYPE    
  INTEGER disabled(1), poll-interval-only(2), poll-interval-and-query(3), query-only(4)  

w2kConfigPrnAutoPollInterval 1.3.6.1.4.1.791.2.10.2.43.1.15.3
&The time (in minutes), when a new auto discovery process is started. Valid values are greater than or equal to 30 or set to -1. If set to -1, auto discovery of printers will no more be made.
OBJECT-TYPE    
  INTEGER  

w2kConfigPrnName 1.3.6.1.4.1.791.2.10.2.43.1.15.4
&Name of the watcher to be added/removed, monitoring a local printer with this name. If adding an auto discovery watcher, this name can be a wildcarded printer name filtering the printers to be auto discovered (any backslash in the wildcarded name must be doubled). For each auto discovered printer a watcher will be created. Important: This name is case insensitive.
OBJECT-TYPE    
  DisplayString  

w2kConfigPrnDescription 1.3.6.1.4.1.791.2.10.2.43.1.15.5
&Any description for this watcher.
OBJECT-TYPE    
  DisplayString  

w2kConfigPrnAggLag 1.3.6.1.4.1.791.2.10.2.43.1.15.6
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
OBJECT-TYPE    
  INTEGER  

w2kConfigPrnEventMonitor 1.3.6.1.4.1.791.2.10.2.43.1.15.7
&Flag indicating whether the occurence of printer events should be monitored and if so, the level of alert to raise.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kConfigPrnQueueWarn 1.3.6.1.4.1.791.2.10.2.43.1.15.8
&Warning threshold for the number of jobs in the printer's queue. Valid values are greater than 0 and smaller than the critical threshold.
OBJECT-TYPE    
  INTEGER  

w2kConfigPrnQueueCrit 1.3.6.1.4.1.791.2.10.2.43.1.15.9
&Critical threshold for the number of jobs in the printer's queue. Valid values are greater than 1 and greater than the warning threshold.
OBJECT-TYPE    
  INTEGER  

w2kConfigPrnQueueMonitor 1.3.6.1.4.1.791.2.10.2.43.1.15.10
&Flag indicating whether the printer's job queue should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigPrnLossAction 1.3.6.1.4.1.791.2.10.2.43.1.15.11
&Flag defining the severity if the loss of the printer is detected or whether to remove this watcher in that case.
OBJECT-TYPE    
  INTEGER remove(1), up(2), down-warning(3), down-critical(4)  

w2kConfigPrnAutoTableWatcherName 1.3.6.1.4.1.791.2.10.2.43.1.15.12
&Name of the watcher to be added in the auto discovery table.
OBJECT-TYPE    
  DisplayString  

w2kConfigPrnButton 1.3.6.1.4.1.791.2.10.2.43.1.15.13
&This attribute is used to add or remove a watcher with the current value of the watcher name attribute in this group, or to add or remove an auto discovery watcher with the current value of the auto table watcher name attribute in this group.
OBJECT-TYPE    
  INTEGER none(1), add(2), remove(3), add-auto(4), remove-auto(5)  

w2kConfigPrnAutoTable 1.3.6.1.4.1.791.2.10.2.43.1.15.14
&A table containing all auto discovery watchers for printers.
OBJECT-TYPE    
  SEQUENCE OF  
    W2kConfigPrnAutoRow

w2kConfigPrnAutoEntry 1.3.6.1.4.1.791.2.10.2.43.1.15.14.1
&The table entry.
OBJECT-TYPE    
  W2kConfigPrnAutoRow  

w2kConfigPrnAutoWatcherName 1.3.6.1.4.1.791.2.10.2.43.1.15.14.1.1
&Name of the auto discovery watcher.
OBJECT-TYPE    
  DisplayString  

w2kConfigPrnAutoName 1.3.6.1.4.1.791.2.10.2.43.1.15.14.1.2
&Wildcarded printer name filtering the printers to be auto discovered (any backslash in the wildcarded name must be doubled). For each auto discovered printer a watcher will be created. Important: This name is case insensitive.
OBJECT-TYPE    
  DisplayString  

w2kConfigPrnAutoDescription 1.3.6.1.4.1.791.2.10.2.43.1.15.14.1.3
&Default for auto discovered printers.
OBJECT-TYPE    
  DisplayString  

w2kConfigPrnAutoAggLag 1.3.6.1.4.1.791.2.10.2.43.1.15.14.1.4
&Default for auto discovered printers.
OBJECT-TYPE    
  INTEGER  

w2kConfigPrnAutoEventMonitor 1.3.6.1.4.1.791.2.10.2.43.1.15.14.1.5
&Default for auto discovered printers.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kConfigPrnAutoQueueWarn 1.3.6.1.4.1.791.2.10.2.43.1.15.14.1.6
&Default for auto discovered printers.
OBJECT-TYPE    
  INTEGER  

w2kConfigPrnAutoQueueCrit 1.3.6.1.4.1.791.2.10.2.43.1.15.14.1.7
&Default for auto discovered printers.
OBJECT-TYPE    
  INTEGER  

w2kConfigPrnAutoQueueMonitor 1.3.6.1.4.1.791.2.10.2.43.1.15.14.1.8
&Default for auto discovered printers.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigPrnAutoLossAction 1.3.6.1.4.1.791.2.10.2.43.1.15.14.1.9
&Default for auto discovered printers.
OBJECT-TYPE    
  INTEGER remove(1), up(2), down-warning(3), down-critical(4)  

w2kConfigPrnAutoButton 1.3.6.1.4.1.791.2.10.2.43.1.15.14.1.10
&This attribute is used to remove this auto discovery watcher.
OBJECT-TYPE    
  INTEGER none(1), remove(2)  

w2kConfigNetGroup 1.3.6.1.4.1.791.2.10.2.43.1.16
OBJECT IDENTIFIER    

w2kConfigNetPollInterval 1.3.6.1.4.1.791.2.10.2.43.1.16.1
&The time (in seconds) between the polling of the network interface information. Valid values are greater than or equal to 30.
OBJECT-TYPE    
  INTEGER  

w2kConfigNetPollMethod 1.3.6.1.4.1.791.2.10.2.43.1.16.2
&If set to 'disabled', the agent no more retrieves the network interface information (not by polling, nor by get request) and sets all statuses to ok. If set to 'poll-interval-only', the agent only retrieves the information by polling, but not by get request. If set to 'poll-interval-and-query', the agent retrieves the information in both cases (polling and get request). If set to 'query-only', the agent retrieves the information for get requests only.
OBJECT-TYPE    
  INTEGER disabled(1), poll-interval-only(2), poll-interval-and-query(3), query-only(4)  

w2kConfigNetAggLag 1.3.6.1.4.1.791.2.10.2.43.1.16.3
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
OBJECT-TYPE    
  INTEGER  

w2kConfigNetInPktWarn 1.3.6.1.4.1.791.2.10.2.43.1.16.4
&Warning threshold for the rate of received packets over TCP/IP connections (packets per second). Valid values are greater than 0 and smaller than the critical threshold.
OBJECT-TYPE    
  INTEGER  

w2kConfigNetInPktCrit 1.3.6.1.4.1.791.2.10.2.43.1.16.5
&Critical threshold for the rate of received packets over TCP/IP connections (packets per second). Valid values are greater than 1 and greater than the warning threshold.
OBJECT-TYPE    
  INTEGER  

w2kConfigNetInPktMonitor 1.3.6.1.4.1.791.2.10.2.43.1.16.6
&Flag indicating whether the received packets rate should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigNetOutPktWarn 1.3.6.1.4.1.791.2.10.2.43.1.16.7
&Warning threshold for the rate of sent packets over TCP/IP connections (packets per second). Valid values are greater than 0 and smaller than the critical threshold.
OBJECT-TYPE    
  INTEGER  

w2kConfigNetOutPktCrit 1.3.6.1.4.1.791.2.10.2.43.1.16.8
&Critical threshold for the rate of sent packets over TCP/IP connections (packets per second). Valid values are greater than 1 and greater than the warning threshold.
OBJECT-TYPE    
  INTEGER  

w2kConfigNetOutPktMonitor 1.3.6.1.4.1.791.2.10.2.43.1.16.9
&Flag indicating whether the sent packets rate should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigNetInErrDWarn 1.3.6.1.4.1.791.2.10.2.43.1.16.10
&Warning threshold for the rate of received errors over TCP/IP connections (errors per poll interval). Valid values are greater than 0 and smaller than the critical threshold.
OBJECT-TYPE    
  INTEGER  

w2kConfigNetInErrDCrit 1.3.6.1.4.1.791.2.10.2.43.1.16.11
&Critical threshold for the rate of received errors over TCP/IP connections (errors per poll interval). Valid values are greater than 1 and greater than the warning threshold.
OBJECT-TYPE    
  INTEGER  

w2kConfigNetInErrDMonitor 1.3.6.1.4.1.791.2.10.2.43.1.16.12
&Flag indicating whether the received errors rate should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigNetOutErrDWarn 1.3.6.1.4.1.791.2.10.2.43.1.16.13
&Warning threshold for the rate of sent errors over TCP/IP connections (errors per poll interval). Valid values are greater than 0 and smaller than the critical threshold.
OBJECT-TYPE    
  INTEGER  

w2kConfigNetOutErrDCrit 1.3.6.1.4.1.791.2.10.2.43.1.16.14
&Critical threshold for the rate of sent errors over TCP/IP connections (errors per poll interval). Valid values are greater than 1 and greater than the warning threshold.
OBJECT-TYPE    
  INTEGER  

w2kConfigNetOutErrDMonitor 1.3.6.1.4.1.791.2.10.2.43.1.16.15
&Flag indicating whether the sent errors rate should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigNetLossAction 1.3.6.1.4.1.791.2.10.2.43.1.16.16
&Flag defining the severity if the loss of the network interface is detected or whether to remove this watcher in that case.
OBJECT-TYPE    
  INTEGER remove(1), up(2), down-warning(3), down-critical(4)  

w2kConfigRegGroup 1.3.6.1.4.1.791.2.10.2.43.1.17
OBJECT IDENTIFIER    

w2kConfigRegPollInterval 1.3.6.1.4.1.791.2.10.2.43.1.17.1
&The time (in seconds) between the polling of the registry entry information. Valid values are greater than or equal to 30.
OBJECT-TYPE    
  INTEGER  

w2kConfigRegPollMethod 1.3.6.1.4.1.791.2.10.2.43.1.17.2
&If set to 'disabled', the agent no more retrieves the registry entry information (not by polling, nor by get request) and sets all statuses to ok. If set to 'poll-interval-only', the agent only retrieves the information by polling, but not by get request. If set to 'poll-interval-and-query', the agent retrieves the information in both cases (polling and get request). If set to 'query-only', the agent retrieves the information for get requests only.
OBJECT-TYPE    
  INTEGER disabled(1), poll-interval-only(2), poll-interval-and-query(3), query-only(4)  

w2kConfigRegName 1.3.6.1.4.1.791.2.10.2.43.1.17.3
&Name of the watcher to be added/removed, monitoring a registry entry with this name. The name is the complete registry path ending with the registry leaf name. If the leaf name contains a backslash, the leaf name must be quoted with double quotes. Important: This name is case insensitive.
OBJECT-TYPE    
  DisplayString  

w2kConfigRegDescription 1.3.6.1.4.1.791.2.10.2.43.1.17.4
&Any description for this watcher.
OBJECT-TYPE    
  DisplayString  

w2kConfigRegAggLag 1.3.6.1.4.1.791.2.10.2.43.1.17.5
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
OBJECT-TYPE    
  INTEGER  

w2kConfigRegExist 1.3.6.1.4.1.791.2.10.2.43.1.17.6
&Flag indicating whether to raise an alert if a registry entry is existent or if it is not-existent.
OBJECT-TYPE    
  INTEGER should-exist(1), should-not-exist(2)  

w2kConfigRegExistMonitor 1.3.6.1.4.1.791.2.10.2.43.1.17.7
&Flag indicating whether the existence of the registry entry should be monitored and if so, the level of alert to raise.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kConfigRegValueRef 1.3.6.1.4.1.791.2.10.2.43.1.17.8
&This attribute is used as the reference value the registry entry is compared with. If the condition is one of 'should-be-equal', 'should-not-be-equal', 'should-be-below' or 'should-be-above', this reference value must be set by the user. In case of 'should-not-change', by setting the status button attribute to 'reset-value', the reference value is set to the current value of the registry entry.
OBJECT-TYPE    
  DisplayString  

w2kConfigRegValueCond 1.3.6.1.4.1.791.2.10.2.43.1.17.9
&Flag indicating whether to raise an alert if a registry entry does not fullfill the given condition compared with the reference value attribute. 'should-be-below' and 'should-be-above' is only allowed for entries with type DWORD. For entries with type Binary 'should-not-change' is the only possible value.
OBJECT-TYPE    
  INTEGER should-be-equal(1), should-not-be-equal(2), should-be-below(3), should-be-above(4), should-not-change(5)  

w2kConfigRegValueMonitor 1.3.6.1.4.1.791.2.10.2.43.1.17.10
&Flag indicating whether the value of the registry entry should be monitored and if so, the level of alert to raise.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kConfigRegButton 1.3.6.1.4.1.791.2.10.2.43.1.17.11
&This attribute is used to add or remove a watcher with the current value of the watcher name attribute in this group.
OBJECT-TYPE    
  INTEGER none(1), add(2), remove(3)  

w2kStatusGroup 1.3.6.1.4.1.791.2.10.2.43.2
OBJECT IDENTIFIER    

w2kStatusGeneralGroup 1.3.6.1.4.1.791.2.10.2.43.2.1
OBJECT IDENTIFIER    

w2kStatusGeneralTotalCount 1.3.6.1.4.1.791.2.10.2.43.2.1.1
&The number of all monitored resources.
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralTotalWarn 1.3.6.1.4.1.791.2.10.2.43.2.1.2
&The number of all monitored resources in a warning status.
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralTotalCrit 1.3.6.1.4.1.791.2.10.2.43.2.1.3
&The number of all monitored resources in a critical status.
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralCpuCount 1.3.6.1.4.1.791.2.10.2.43.2.1.4
&The number of monitored processors (including the processors total value).
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralCpuWarn 1.3.6.1.4.1.791.2.10.2.43.2.1.5
&The number of monitored processors in a warning state.
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralCpuCrit 1.3.6.1.4.1.791.2.10.2.43.2.1.6
&The number of monitored processors in a critical state.
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralMemCount 1.3.6.1.4.1.791.2.10.2.43.2.1.7
&The number of monitored memory resources.
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralMemWarn 1.3.6.1.4.1.791.2.10.2.43.2.1.8
&The number of monitored memory resources in a warning state.
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralMemCrit 1.3.6.1.4.1.791.2.10.2.43.2.1.9
&The number of monitored memory resources in a critical state.
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralLVolCount 1.3.6.1.4.1.791.2.10.2.43.2.1.10
&The number of monitored logical volumes.
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralLVolWarn 1.3.6.1.4.1.791.2.10.2.43.2.1.11
&The number of monitored logical volumes in a warning state.
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralLVolCrit 1.3.6.1.4.1.791.2.10.2.43.2.1.12
&The number of monitored logical volumes in a critical state.
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralMntCount 1.3.6.1.4.1.791.2.10.2.43.2.1.13
&The number of monitored mounts.
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralMntWarn 1.3.6.1.4.1.791.2.10.2.43.2.1.14
&The number of monitored mounts in a warning state.
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralMntCrit 1.3.6.1.4.1.791.2.10.2.43.2.1.15
&The number of monitored mounts in a critical state.
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralDfsCount 1.3.6.1.4.1.791.2.10.2.43.2.1.16
&The number of monitored distributed file system links.
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralDfsWarn 1.3.6.1.4.1.791.2.10.2.43.2.1.17
&The number of monitored distributed file system links in a warning state.
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralDfsCrit 1.3.6.1.4.1.791.2.10.2.43.2.1.18
&The number of monitored distributed file system links in a critical state.
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralQuotCount 1.3.6.1.4.1.791.2.10.2.43.2.1.19
&The number of monitored quotas.
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralQuotWarn 1.3.6.1.4.1.791.2.10.2.43.2.1.20
&The number of monitored quotas in a warning state.
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralQuotCrit 1.3.6.1.4.1.791.2.10.2.43.2.1.21
&The number of monitored quotas in a critical state.
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralDirCount 1.3.6.1.4.1.791.2.10.2.43.2.1.22
&The number of monitored directories.
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralDirWarn 1.3.6.1.4.1.791.2.10.2.43.2.1.23
&The number of monitored directories in a warning state.
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralDirCrit 1.3.6.1.4.1.791.2.10.2.43.2.1.24
&The number of monitored directories in a critical state.
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralFileCount 1.3.6.1.4.1.791.2.10.2.43.2.1.25
&The number of monitored files.
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralFileWarn 1.3.6.1.4.1.791.2.10.2.43.2.1.26
&The number of monitored files in a warning state.
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralFileCrit 1.3.6.1.4.1.791.2.10.2.43.2.1.27
&The number of monitored files in a critical state.
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralProcCount 1.3.6.1.4.1.791.2.10.2.43.2.1.28
&The number of monitored processes.
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralProcWarn 1.3.6.1.4.1.791.2.10.2.43.2.1.29
&The number of monitored processes in a warning state.
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralProcCrit 1.3.6.1.4.1.791.2.10.2.43.2.1.30
&The number of monitored processes in a critical state.
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralSrvcCount 1.3.6.1.4.1.791.2.10.2.43.2.1.31
&The number of monitored services.
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralSrvcWarn 1.3.6.1.4.1.791.2.10.2.43.2.1.32
&The number of monitored services in a warning state.
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralSrvcCrit 1.3.6.1.4.1.791.2.10.2.43.2.1.33
&The number of monitored services in a critical state.
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralJobCount 1.3.6.1.4.1.791.2.10.2.43.2.1.34
&The number of monitored jobs.
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralJobWarn 1.3.6.1.4.1.791.2.10.2.43.2.1.35
&The number of monitored jobs in a warning state.
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralJobCrit 1.3.6.1.4.1.791.2.10.2.43.2.1.36
&The number of monitored jobs in a critical state.
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralSessCount 1.3.6.1.4.1.791.2.10.2.43.2.1.37
&The number of monitored sessions.
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralSessWarn 1.3.6.1.4.1.791.2.10.2.43.2.1.38
&The number of monitored sessions in a warning state.
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralSessCrit 1.3.6.1.4.1.791.2.10.2.43.2.1.39
&The number of monitored sessions in a critical state.
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralPrnCount 1.3.6.1.4.1.791.2.10.2.43.2.1.40
&The number of monitored printers.
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralPrnWarn 1.3.6.1.4.1.791.2.10.2.43.2.1.41
&The number of monitored printers in a warning state.
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralPrnCrit 1.3.6.1.4.1.791.2.10.2.43.2.1.42
&The number of monitored printers in a critical state.
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralNetCount 1.3.6.1.4.1.791.2.10.2.43.2.1.43
&The number of monitored network interfaces (including the network interfaces total value).
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralNetWarn 1.3.6.1.4.1.791.2.10.2.43.2.1.44
&The number of monitored network interfaces in a warning state.
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralNetCrit 1.3.6.1.4.1.791.2.10.2.43.2.1.45
&The number of monitored network interfaces in a critical state.
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralRegCount 1.3.6.1.4.1.791.2.10.2.43.2.1.46
&The number of monitored registry entries.
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralRegWarn 1.3.6.1.4.1.791.2.10.2.43.2.1.47
&The number of monitored registry entries in a warning state.
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralRegCrit 1.3.6.1.4.1.791.2.10.2.43.2.1.48
&The number of monitored registry entries in a critical state.
OBJECT-TYPE    
  INTEGER  

w2kStatusCpuGroup 1.3.6.1.4.1.791.2.10.2.43.2.2
OBJECT IDENTIFIER    

w2kStatusCpuTotalLoadValue 1.3.6.1.4.1.791.2.10.2.43.2.2.1
&The current total utilization of all processors (as percentage value of 100).
OBJECT-TYPE    
  INTEGER  

w2kStatusCpuTotalLoadLagValue 1.3.6.1.4.1.791.2.10.2.43.2.2.2
&The number of consecutive poll intervals that the threshold had been (b)reached.
OBJECT-TYPE    
  INTEGER  

w2kStatusCpuTotalLoadLag 1.3.6.1.4.1.791.2.10.2.43.2.2.3
&The number of consecutive poll intervals that the threshold has to be (b)reached before the status changes. Valid values are greater than 0.
OBJECT-TYPE    
  INTEGER  

w2kStatusCpuTotalLoadWarn 1.3.6.1.4.1.791.2.10.2.43.2.2.4
&Warning threshold for the total utilization of all processors (as percentage value of 100). Valid values are 1 to 99 and smaller than the critical threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusCpuTotalLoadCrit 1.3.6.1.4.1.791.2.10.2.43.2.2.5
&Critical threshold for the total utilization of all processors (as percentage value of 100). Valid values are 2 to 100 and greater than the warning threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusCpuTotalLoadMonitor 1.3.6.1.4.1.791.2.10.2.43.2.2.6
&Flag indicating whether the total utilization of all processors should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusCpuTotalLoadStatus 1.3.6.1.4.1.791.2.10.2.43.2.2.7
&The current status of the total utilization of all processors as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusCpuTotalCallBackRef 1.3.6.1.4.1.791.2.10.2.43.2.2.8
&The name of the Call-Back reference that should be invoked in case of a status change.
OBJECT-TYPE    
  DisplayString  

w2kStatusCpuCount 1.3.6.1.4.1.791.2.10.2.43.2.2.9
&The number of entries in the w2kStatusCpuTable.
OBJECT-TYPE    
  INTEGER  

w2kStatusCpuTable 1.3.6.1.4.1.791.2.10.2.43.2.2.10
&A table containing information about all monitored processors.
OBJECT-TYPE    
  SEQUENCE OF  
    W2kStatusCpuRow

w2kStatusCpuEntry 1.3.6.1.4.1.791.2.10.2.43.2.2.10.1
&The table entry.
OBJECT-TYPE    
  W2kStatusCpuRow  

w2kStatusCpuName 1.3.6.1.4.1.791.2.10.2.43.2.2.10.1.1
&Name of the watcher, monitoring a processor with the processor identification number contained in this dummy name.
OBJECT-TYPE    
  DisplayString  

w2kStatusCpuType 1.3.6.1.4.1.791.2.10.2.43.2.2.10.1.2
&The type of the processor.
OBJECT-TYPE    
  DisplayString  

w2kStatusCpuAggStatus 1.3.6.1.4.1.791.2.10.2.43.2.2.10.1.3
&The current status of the processor as a 'worst case' aggregate of all its statuses.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusCpuLoadValue 1.3.6.1.4.1.791.2.10.2.43.2.2.10.1.4
&The current processor utilization (as percentage value of 100).
OBJECT-TYPE    
  INTEGER  

w2kStatusCpuLoadLagValue 1.3.6.1.4.1.791.2.10.2.43.2.2.10.1.5
&The number of consecutive poll intervals that the threshold had been (b)reached.
OBJECT-TYPE    
  INTEGER  

w2kStatusCpuLoadLag 1.3.6.1.4.1.791.2.10.2.43.2.2.10.1.6
&The number of consecutive poll intervals that the threshold has to be (b)reached before the status changes. Valid values are greater than 0.
OBJECT-TYPE    
  INTEGER  

w2kStatusCpuLoadWarn 1.3.6.1.4.1.791.2.10.2.43.2.2.10.1.7
&Warning threshold for the utilization of the processor (as percentage value of 100). Valid values are 1 to 99 and smaller than the critical threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusCpuLoadCrit 1.3.6.1.4.1.791.2.10.2.43.2.2.10.1.8
&Critical threshold for the utilization of the processor (as percentage value of 100). Valid values are 2 to 100 and greater than the warning threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusCpuLoadMonitor 1.3.6.1.4.1.791.2.10.2.43.2.2.10.1.9
&Flag indicating whether the utilization of the processor should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusCpuLoadStatus 1.3.6.1.4.1.791.2.10.2.43.2.2.10.1.10
&The current status of the processor utilization as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusCpuLossAction 1.3.6.1.4.1.791.2.10.2.43.2.2.10.1.11
&Flag defining the severity if the loss of the processor is detected or whether to remove this watcher in that case.
OBJECT-TYPE    
  INTEGER remove(1), up(2), down-warning(3), down-critical(4)  

w2kStatusCpuLossStatus 1.3.6.1.4.1.791.2.10.2.43.2.2.10.1.12
&The current status of the processor's loss as determined by the loss action.
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down-warning(3), down-critical(4)  

w2kStatusCpuCallBackRef 1.3.6.1.4.1.791.2.10.2.43.2.2.10.1.13
&The name of the Call-Back reference that should be invoked in case of a status change.
OBJECT-TYPE    
  DisplayString  

w2kStatusMemGroup 1.3.6.1.4.1.791.2.10.2.43.2.3
OBJECT IDENTIFIER    

w2kStatusMemVirtTotal 1.3.6.1.4.1.791.2.10.2.43.2.3.1
&The total size of the virtual memory on the system that can be committed (in kilobytes). The virtual memory comprises the physical and the paging memory.
OBJECT-TYPE    
  INTEGER  

w2kStatusMemVirtValue 1.3.6.1.4.1.791.2.10.2.43.2.3.2
&The size of the currently committed virtual memory (in kilobytes).
OBJECT-TYPE    
  INTEGER  

w2kStatusMemVirtLagValue 1.3.6.1.4.1.791.2.10.2.43.2.3.3
&The number of consecutive poll intervals that the threshold had been (b)reached.
OBJECT-TYPE    
  INTEGER  

w2kStatusMemVirtLag 1.3.6.1.4.1.791.2.10.2.43.2.3.4
&The number of consecutive poll intervals that the threshold has to be (b)reached before the status changes. Valid values are greater than 0.
OBJECT-TYPE    
  INTEGER  

w2kStatusMemVirtWarnValue 1.3.6.1.4.1.791.2.10.2.43.2.3.5
&The actual warning threshold in committed kilobytes derived from the configured warning threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusMemVirtCritValue 1.3.6.1.4.1.791.2.10.2.43.2.3.6
&The actual critical threshold in committed kilobytes derived from the configured critical threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusMemVirtWarn 1.3.6.1.4.1.791.2.10.2.43.2.3.7
&Warning threshold in kilobytes, either for the free (by appending a 'F') or for the committed virtual memory. The committed value can also be defined as a percentage value of the total size (by appending a '%'). Valid values are greater than 0 and smaller (in case of 'free' greater) critical threshold.
OBJECT-TYPE    
  DisplayString  

w2kStatusMemVirtCrit 1.3.6.1.4.1.791.2.10.2.43.2.3.8
&Critical threshold in kilobytes, either for the free (by appending a 'F') or for the committed virtual memory. The committed value can also be defined as a percentage value of the total size (by appending a '%'). Valid values are greater than 1 and greater (in case of 'free' smaller) warning threshold.
OBJECT-TYPE    
  DisplayString  

w2kStatusMemVirtMonitor 1.3.6.1.4.1.791.2.10.2.43.2.3.9
&Flag indicating whether the virtual memory should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusMemVirtStatus 1.3.6.1.4.1.791.2.10.2.43.2.3.10
&The current status of the virtual memory as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusMemPhysTotal 1.3.6.1.4.1.791.2.10.2.43.2.3.11
&The total size of the physical memory on the system (in kilobytes).
OBJECT-TYPE    
  INTEGER  

w2kStatusMemPhysValue 1.3.6.1.4.1.791.2.10.2.43.2.3.12
&The size of the currently used physical memory (in kilobytes).
OBJECT-TYPE    
  INTEGER  

w2kStatusMemPhysLagValue 1.3.6.1.4.1.791.2.10.2.43.2.3.13
&The number of consecutive poll intervals that the threshold had been (b)reached.
OBJECT-TYPE    
  INTEGER  

w2kStatusMemPhysLag 1.3.6.1.4.1.791.2.10.2.43.2.3.14
&The number of consecutive poll intervals that the threshold has to be (b)reached before the status changes. Valid values are greater than 0.
OBJECT-TYPE    
  INTEGER  

w2kStatusMemPhysWarnValue 1.3.6.1.4.1.791.2.10.2.43.2.3.15
&The actual warning threshold in used kilobytes derived from the configured warning threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusMemPhysCritValue 1.3.6.1.4.1.791.2.10.2.43.2.3.16
&The actual critical threshold in used kilobytes derived from the configured critical threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusMemPhysWarn 1.3.6.1.4.1.791.2.10.2.43.2.3.17
&Warning threshold in kilobytes, either for the free (by appending a 'F') or for the used physical memory. The used value can also be defined as a percentage value of the total size (by appending a '%'). Valid values are greater than 0 and smaller (in case of 'free' greater) critical threshold.
OBJECT-TYPE    
  DisplayString  

w2kStatusMemPhysCrit 1.3.6.1.4.1.791.2.10.2.43.2.3.18
&Critical threshold in kilobytes, either for the free (by appending a 'F') or for the used physical memory. The used value can also be defined as a percentage value of the total size (by appending a '%'). Valid values are greater than 1 and greater (in case of 'free' smaller) warning threshold.
OBJECT-TYPE    
  DisplayString  

w2kStatusMemPhysMonitor 1.3.6.1.4.1.791.2.10.2.43.2.3.19
&Flag indicating whether the physical memory should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusMemPhysStatus 1.3.6.1.4.1.791.2.10.2.43.2.3.20
&The current status of the physical memory as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusMemPageTotal 1.3.6.1.4.1.791.2.10.2.43.2.3.21
&The total size of the paging memory on the system (in kilobytes).
OBJECT-TYPE    
  INTEGER  

w2kStatusMemPageValue 1.3.6.1.4.1.791.2.10.2.43.2.3.22
&The size of the currently used paging memory (in kilobytes).
OBJECT-TYPE    
  INTEGER  

w2kStatusMemPageLagValue 1.3.6.1.4.1.791.2.10.2.43.2.3.23
&The number of consecutive poll intervals that the threshold had been (b)reached.
OBJECT-TYPE    
  INTEGER  

w2kStatusMemPageLag 1.3.6.1.4.1.791.2.10.2.43.2.3.24
&The number of consecutive poll intervals that the threshold has to be (b)reached before the status changes. Valid values are greater than 0.
OBJECT-TYPE    
  INTEGER  

w2kStatusMemPageWarnValue 1.3.6.1.4.1.791.2.10.2.43.2.3.25
&The actual warning threshold in used kilobytes derived from the configured warning threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusMemPageCritValue 1.3.6.1.4.1.791.2.10.2.43.2.3.26
&The actual critical threshold in used kilobytes derived from the configured critical threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusMemPageWarn 1.3.6.1.4.1.791.2.10.2.43.2.3.27
&Warning threshold in kilobytes, either for the free (by appending a 'F') or for the used paging memory. The used value can also be defined as a percentage value of the total size (by appending a '%'). Valid values are greater than 0 and smaller (in case of 'free' greater) critical threshold.
OBJECT-TYPE    
  DisplayString  

w2kStatusMemPageCrit 1.3.6.1.4.1.791.2.10.2.43.2.3.28
&Critical threshold in kilobytes, either for the free (by appending a 'F') or for the used paging memory. The used value can also be defined as a percentage value of the total size (by appending a '%'). Valid values are greater than 1 and greater (in case of 'free' smaller) warning threshold.
OBJECT-TYPE    
  DisplayString  

w2kStatusMemPageMonitor 1.3.6.1.4.1.791.2.10.2.43.2.3.29
&Flag indicating whether the paging memory should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusMemPageStatus 1.3.6.1.4.1.791.2.10.2.43.2.3.30
&The current status of the paging memory as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusMemCallBackRef 1.3.6.1.4.1.791.2.10.2.43.2.3.31
&The name of the Call-Back reference that should be invoked in case of a status change.
OBJECT-TYPE    
  DisplayString  

w2kStatusLVolGroup 1.3.6.1.4.1.791.2.10.2.43.2.4
OBJECT IDENTIFIER    

w2kStatusLVolCount 1.3.6.1.4.1.791.2.10.2.43.2.4.1
&The number of entries in the w2kStatusLVolTable.
OBJECT-TYPE    
  INTEGER  

w2kStatusLVolTable 1.3.6.1.4.1.791.2.10.2.43.2.4.2
&A table containing information about all monitored logical volumes.
OBJECT-TYPE    
  SEQUENCE OF  
    W2kStatusLVolRow

w2kStatusLVolEntry 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1
&The table entry.
OBJECT-TYPE    
  W2kStatusLVolRow  

w2kStatusLVolName 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.1
&Name of the watcher, monitoring a logical volume with this name. Important: This name is case insensitive.
OBJECT-TYPE    
  DisplayString  

w2kStatusLVolDescription 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.2
&Any description for this watcher.
OBJECT-TYPE    
  DisplayString  

w2kStatusLVolMounts 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.3
&A list of the mount points, where this logical volume is mounted on.
OBJECT-TYPE    
  DisplayString  

w2kStatusLVolInfo 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.4
&Information about the format (e.g. NTFS), the alternate name (e.g. used in PerfMon) and the label of the logical volume. The alternate name may be empty. The single values are delimited by a pipe sign.
OBJECT-TYPE    
  DisplayString  

w2kStatusLVolAutoWatcherName 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.5
&Name of the auto discovery watcher, which created this watcher.
OBJECT-TYPE    
  DisplayString  

w2kStatusLVolAggLagValue 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.6
&The number of consecutive poll intervals on which any status was not in the Ok or Up state.
OBJECT-TYPE    
  INTEGER  

w2kStatusLVolAggLag 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.7
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
OBJECT-TYPE    
  INTEGER  

w2kStatusLVolAggStatus 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.8
&The current status of the logical volume as a 'worst case' aggregate of all its statuses.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusLVolSizeTotal 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.9
&The total size of the logical volume (in megabytes).
OBJECT-TYPE    
  INTEGER  

w2kStatusLVolSizeValue 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.10
&The current value of the used logical volume size (in megabytes).
OBJECT-TYPE    
  INTEGER  

w2kStatusLVolSizeWarnValue 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.11
&The actual warning threshold in used megabytes derived from the configured warning threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusLVolSizeCritValue 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.12
&The actual critical threshold in used megabytes derived from the configured critical threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusLVolSizeWarn 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.13
&Warning threshold in megabytes, either for the free (by appending a 'F') or for the used logical volume size. The used size can also be defined as a percentage value of the total logical volume size (by appending a '%'). Valid values are greater than 0 and smaller (in case of 'free' greater) than the critical threshold.
OBJECT-TYPE    
  DisplayString  

w2kStatusLVolSizeCrit 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.14
&Critical threshold in megabytes, either for the free (by appending a 'F') or for the used logical volume size. The used size can also be defined as a percentage value of the total logical volume size (by appending a '%'). Valid values are greater than 1 and greater (in case of 'free' smaller) than the warning threshold.
OBJECT-TYPE    
  DisplayString  

w2kStatusLVolSizeMonitor 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.15
&Flag indicating whether the used logical volume size should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusLVolSizeStatus 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.16
&The current status of the used logical volume size as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusLVolSizeDValue 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.17
&The current value of the delta in used logical volume size monitored in the last polling interval (in megabytes). In case of shrinkage this is a negative number.
OBJECT-TYPE    
  INTEGER  

w2kStatusLVolSizeDWarnValue 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.18
&The actual warning threshold in megabytes derived from the configured warning threshold.
OBJECT-TYPE    
  DisplayString  

w2kStatusLVolSizeDCritValue 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.19
&The actual critical threshold in megabytes derived from the configured critical threshold.
OBJECT-TYPE    
  DisplayString  

w2kStatusLVolSizeDWarn 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.20
&Warning threshold, either for the growth (by appending a '+') or for the shrinkage (by appending a '-') or for the absolute delta in used logical volume size monitored in one poll interval. Growth, shrinkage and absolute delta can be given in megabytes or as a percentage value of the total logical volume size (by appending a '%'). Valid values are greater than 0 and smaller than the critical threshold.
OBJECT-TYPE    
  DisplayString  

w2kStatusLVolSizeDCrit 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.21
&Critical threshold, either for the growth (by appending a '+') or for the shrinkage (by appending a '-') or for the absolute delta in used logical volume size monitored in one poll interval. Growth, shrinkage and absolute delta can be given in megabytes or as a percentage value of the total logical volume size (by appending a '%'). Valid values are greater than 1 and greater than the warning threshold.
OBJECT-TYPE    
  DisplayString  

w2kStatusLVolSizeDMonitor 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.22
&Flag indicating whether the delta in used logical volume size should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusLVolSizeDStatus 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.23
&The current status of delta in used logical volume size as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusLVolTPutValue 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.24
&The current value of the throughput rate (kilobytes per second).
OBJECT-TYPE    
  INTEGER  

w2kStatusLVolTPutWarn 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.25
&Warning threshold for the throughput rate (kilobytes per second). Valid values are greater than 0 and smaller than the critical threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusLVolTPutCrit 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.26
&Critical threshold for the throughput rate (kilobytes per second). Valid values are greater than 1 and greater than the warning threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusLVolTPutMonitor 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.27
&Flag indicating whether the throughput rate should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusLVolTPutStatus 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.28
&The current status of the throughput rate as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusLVolFragValue 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.29
&The current value of the file fragmentation (as percentage value of 100).
OBJECT-TYPE    
  INTEGER  

w2kStatusLVolFragWarn 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.30
&Warning threshold for the file fragmentation (as percentage value of 100). Valid values are 1 to 99 and smaller than the critical threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusLVolFragCrit 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.31
&Critical threshold for the file fragmentation (as percentage value of 100). Valid values are 2 to 100 and greater than the warning threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusLVolFragMonitor 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.32
&Flag indicating whether the file fragmentation should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusLVolFragStatus 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.33
&The current status of the file fragmentation as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusLVolLossAction 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.34
&Flag defining the severity if the loss of the logical volume is detected or whether to remove this watcher in that case.
OBJECT-TYPE    
  INTEGER remove(1), up(2), down-warning(3), down-critical(4)  

w2kStatusLVolLossStatus 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.35
&The current status of the logical volume's loss as determined by the loss action.
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down-warning(3), down-critical(4)  

w2kStatusLVolCallBackRef 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.36
&The name of the Call-Back reference that should be invoked in case of a status change.
OBJECT-TYPE    
  DisplayString  

w2kStatusLVolButton 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.37
&This attribute is used to remove this watcher.
OBJECT-TYPE    
  INTEGER none(1), remove(2)  

w2kStatusMntGroup 1.3.6.1.4.1.791.2.10.2.43.2.5
OBJECT IDENTIFIER    

w2kStatusMntCount 1.3.6.1.4.1.791.2.10.2.43.2.5.1
&The number of entries in the w2kStatusMntTable.
OBJECT-TYPE    
  INTEGER  

w2kStatusMntTable 1.3.6.1.4.1.791.2.10.2.43.2.5.2
&A table containing information about all monitored mounts.
OBJECT-TYPE    
  SEQUENCE OF  
    W2kStatusMntRow

w2kStatusMntEntry 1.3.6.1.4.1.791.2.10.2.43.2.5.2.1
&The table entry.
OBJECT-TYPE    
  W2kStatusMntRow  

w2kStatusMntName 1.3.6.1.4.1.791.2.10.2.43.2.5.2.1.1
&Name of the watcher, monitoring a mount with this name. Important: This name is case insensitive.
OBJECT-TYPE    
  DisplayString  

w2kStatusMntDescription 1.3.6.1.4.1.791.2.10.2.43.2.5.2.1.2
&Any description for this watcher.
OBJECT-TYPE    
  DisplayString  

w2kStatusMntAutoWatcherName 1.3.6.1.4.1.791.2.10.2.43.2.5.2.1.3
&Name of the auto discovery watcher, which created this watcher.
OBJECT-TYPE    
  DisplayString  

w2kStatusMntAggLagValue 1.3.6.1.4.1.791.2.10.2.43.2.5.2.1.4
&The number of consecutive poll intervals on which any status was not in the Ok or Up state.
OBJECT-TYPE    
  INTEGER  

w2kStatusMntAggLag 1.3.6.1.4.1.791.2.10.2.43.2.5.2.1.5
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
OBJECT-TYPE    
  INTEGER  

w2kStatusMntAggStatus 1.3.6.1.4.1.791.2.10.2.43.2.5.2.1.6
&The current status of the mount as a 'worst case' aggregate of all its statuses.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusMntRelToValue 1.3.6.1.4.1.791.2.10.2.43.2.5.2.1.7
&The name of the current logical volume, which this mount is mounting.
OBJECT-TYPE    
  DisplayString  

w2kStatusMntRelToRef 1.3.6.1.4.1.791.2.10.2.43.2.5.2.1.8
&The reference name, which is the name of the logical volume, mounted by this mount when this watcher was created or when the last 'reset-relTo' has been made.
OBJECT-TYPE    
  DisplayString  

w2kStatusMntRelToMonitor 1.3.6.1.4.1.791.2.10.2.43.2.5.2.1.9
&Flag indicating whether a change of the logical volume, mounted by this mount, should be monitored and if so, the level of alert to raise. Note: A change will not occur if the related logical volume is lossed. In that case the mount itself becomes lossed.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kStatusMntRelToStatus 1.3.6.1.4.1.791.2.10.2.43.2.5.2.1.10
&The current status of the mount's relation. The status 'unknown' means that the current value could not be retrieved from the system.
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down-warning(3), down-critical(4)  

w2kStatusMntLossAction 1.3.6.1.4.1.791.2.10.2.43.2.5.2.1.11
&Flag defining the severity if the loss of the mount is detected or whether to remove this watcher in that case.
OBJECT-TYPE    
  INTEGER remove(1), up(2), down-warning(3), down-critical(4)  

w2kStatusMntLossStatus 1.3.6.1.4.1.791.2.10.2.43.2.5.2.1.12
&The current status of the mount's loss as determined by the loss action.
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down-warning(3), down-critical(4)  

w2kStatusMntCallBackRef 1.3.6.1.4.1.791.2.10.2.43.2.5.2.1.13
&The name of the Call-Back reference that should be invoked in case of a status change.
OBJECT-TYPE    
  DisplayString  

w2kStatusMntButton 1.3.6.1.4.1.791.2.10.2.43.2.5.2.1.14
&This attribute is used to remove this watcher or to reset the 'related to' reference to the current value of the mount.
OBJECT-TYPE    
  INTEGER none(1), remove(2), reset-relTo(3)  

w2kStatusDfsGroup 1.3.6.1.4.1.791.2.10.2.43.2.6
OBJECT IDENTIFIER    

w2kStatusDfsCount 1.3.6.1.4.1.791.2.10.2.43.2.6.1
&The number of entries in the w2kStatusDfsTable.
OBJECT-TYPE    
  INTEGER  

w2kStatusDfsTable 1.3.6.1.4.1.791.2.10.2.43.2.6.2
&A table containing information about all monitored distributed file system links.
OBJECT-TYPE    
  SEQUENCE OF  
    W2kStatusDfsRow

w2kStatusDfsEntry 1.3.6.1.4.1.791.2.10.2.43.2.6.2.1
&The table entry.
OBJECT-TYPE    
  W2kStatusDfsRow  

w2kStatusDfsName 1.3.6.1.4.1.791.2.10.2.43.2.6.2.1.1
&Name of the watcher, monitoring a distributed file system link with this name. The name consists of the Dfs root name followed by the Dfs link name. These two names are concatenated by a back-slash. The single Dfs root name (without '\DfsLinkName') can also be used as watcher name, to be able to monitor all Dfs links of a Dfs root. In that case no loss action will be triggered if no Dfs link exists. Important: This name is case insensitive.
OBJECT-TYPE    
  DisplayString  

w2kStatusDfsDescription 1.3.6.1.4.1.791.2.10.2.43.2.6.2.1.2
&Any description for this watcher.
OBJECT-TYPE    
  DisplayString  

w2kStatusDfsIds 1.3.6.1.4.1.791.2.10.2.43.2.6.2.1.3
&A pipe sign separated list of those replicas of the distributed file system link, that are unavailable.
OBJECT-TYPE    
  DisplayString  

w2kStatusDfsAutoWatcherName 1.3.6.1.4.1.791.2.10.2.43.2.6.2.1.4
&Name of the auto discovery watcher, which created this watcher.
OBJECT-TYPE    
  DisplayString  

w2kStatusDfsAggLagValue 1.3.6.1.4.1.791.2.10.2.43.2.6.2.1.5
&The number of consecutive poll intervals on which any status was not in the Ok or Up state.
OBJECT-TYPE    
  INTEGER  

w2kStatusDfsAggLag 1.3.6.1.4.1.791.2.10.2.43.2.6.2.1.6
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
OBJECT-TYPE    
  INTEGER  

w2kStatusDfsAggStatus 1.3.6.1.4.1.791.2.10.2.43.2.6.2.1.7
&The current status of the distributed file system link as a 'worst case' aggregate of all its statuses.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusDfsReplicaTotal 1.3.6.1.4.1.791.2.10.2.43.2.6.2.1.8
&The total number of replicas of the distributed file system link.
OBJECT-TYPE    
  INTEGER  

w2kStatusDfsReplicaValue 1.3.6.1.4.1.791.2.10.2.43.2.6.2.1.9
&The current value of the unavailable replicas number. Replicas set to 'offline' are also counted as being unavailable.
OBJECT-TYPE    
  INTEGER  

w2kStatusDfsReplicaWarn 1.3.6.1.4.1.791.2.10.2.43.2.6.2.1.10
&Warning threshold for the number of unavailable replicas of the distributed file system link. Valid values are greater than 0 and smaller than the critical threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusDfsReplicaCrit 1.3.6.1.4.1.791.2.10.2.43.2.6.2.1.11
&Critical threshold for the number of unavailable replicas of the distributed file system link. Valid values are greater than 1 and greater than the warning threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusDfsReplicaMonitor 1.3.6.1.4.1.791.2.10.2.43.2.6.2.1.12
&Flag indicating whether the unavailable replicas should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusDfsReplicaStatus 1.3.6.1.4.1.791.2.10.2.43.2.6.2.1.13
&The current status of the unavailable replicas number as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusDfsLossAction 1.3.6.1.4.1.791.2.10.2.43.2.6.2.1.14
&Flag defining the severity if the loss of the distributed file system link is detected or whether to remove this watcher in that case.
OBJECT-TYPE    
  INTEGER remove(1), up(2), down-warning(3), down-critical(4)  

w2kStatusDfsLossStatus 1.3.6.1.4.1.791.2.10.2.43.2.6.2.1.15
&The current status of the distributed file system link's loss as determined by the loss action.
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down-warning(3), down-critical(4)  

w2kStatusDfsCallBackRef 1.3.6.1.4.1.791.2.10.2.43.2.6.2.1.16
&The name of the Call-Back reference that should be invoked in case of a status change.
OBJECT-TYPE    
  DisplayString  

w2kStatusDfsButton 1.3.6.1.4.1.791.2.10.2.43.2.6.2.1.17
&This attribute is used to remove this watcher.
OBJECT-TYPE    
  INTEGER none(1), remove(2)  

w2kStatusQuotGroup 1.3.6.1.4.1.791.2.10.2.43.2.7
OBJECT IDENTIFIER    

w2kStatusQuotCount 1.3.6.1.4.1.791.2.10.2.43.2.7.1
&The number of entries in the w2kStatusQuotTable.
OBJECT-TYPE    
  INTEGER  

w2kStatusQuotTable 1.3.6.1.4.1.791.2.10.2.43.2.7.2
&A table containing information about all monitored quotas.
OBJECT-TYPE    
  SEQUENCE OF  
    W2kStatusQuotRow

w2kStatusQuotEntry 1.3.6.1.4.1.791.2.10.2.43.2.7.2.1
&The table entry.
OBJECT-TYPE    
  W2kStatusQuotRow  

w2kStatusQuotLVolName 1.3.6.1.4.1.791.2.10.2.43.2.7.2.1.1
&Logical volume name of the watcher, monitoring a quota with this logical volume name. The name specifies the logical volume on which this quota exists. Important: This name is case insensitive.
OBJECT-TYPE    
  DisplayString  

w2kStatusQuotUserName 1.3.6.1.4.1.791.2.10.2.43.2.7.2.1.2
&User name of the watcher, monitoring a quota with this user name. The name specifies the user for whom this quota exists and is in the form 'domainName\userName' or 'userName@domainName'. Important: This name is case insensitive.
OBJECT-TYPE    
  DisplayString  

w2kStatusQuotDescription 1.3.6.1.4.1.791.2.10.2.43.2.7.2.1.3
&Any description for this watcher.
OBJECT-TYPE    
  DisplayString  

w2kStatusQuotAggLagValue 1.3.6.1.4.1.791.2.10.2.43.2.7.2.1.4
&The number of consecutive poll intervals on which any status was not in the Ok or Up state.
OBJECT-TYPE    
  INTEGER  

w2kStatusQuotAggLag 1.3.6.1.4.1.791.2.10.2.43.2.7.2.1.5
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
OBJECT-TYPE    
  INTEGER  

w2kStatusQuotAggStatus 1.3.6.1.4.1.791.2.10.2.43.2.7.2.1.6
&The current status of the quota as a 'worst case' aggregate of all its statuses.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusQuotExist 1.3.6.1.4.1.791.2.10.2.43.2.7.2.1.7
&Flag indicating whether to raise an alert if a quota is existent or if it is not-existent.
OBJECT-TYPE    
  INTEGER should-exist(1), should-not-exist(2)  

w2kStatusQuotExistMonitor 1.3.6.1.4.1.791.2.10.2.43.2.7.2.1.8
&Flag indicating whether the existence of the quota should be monitored and if so, the level of alert to raise.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kStatusQuotExistStatus 1.3.6.1.4.1.791.2.10.2.43.2.7.2.1.9
&The current status of the quota existence.
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down-warning(3), down-critical(4)  

w2kStatusQuotSizeValue 1.3.6.1.4.1.791.2.10.2.43.2.7.2.1.10
&The current value of the used quota size (in kilobytes).
OBJECT-TYPE    
  INTEGER  

w2kStatusQuotSizeWarn 1.3.6.1.4.1.791.2.10.2.43.2.7.2.1.11
&Warning threshold for the used quota size (in kilobytes). Initial this equals the warning level of the Windows 2000 quota management. Valid values are greater than 0 and smaller than the critical threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusQuotSizeCrit 1.3.6.1.4.1.791.2.10.2.43.2.7.2.1.12
&Critical threshold for the used quota size (in kilobytes). Initial this equals the quota limit of the Windows 2000 quota management. Valid values are greater than 1 and graeter warning threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusQuotSizeMonitor 1.3.6.1.4.1.791.2.10.2.43.2.7.2.1.13
&Flag indicating whether the used quota size should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusQuotSizeStatus 1.3.6.1.4.1.791.2.10.2.43.2.7.2.1.14
&The current status of the used quota size as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusQuotCallBackRef 1.3.6.1.4.1.791.2.10.2.43.2.7.2.1.15
&The name of the Call-Back reference that should be invoked in case of a status change.
OBJECT-TYPE    
  DisplayString  

w2kStatusQuotButton 1.3.6.1.4.1.791.2.10.2.43.2.7.2.1.16
&This attribute is used to remove this watcher.
OBJECT-TYPE    
  INTEGER none(1), remove(2)  

w2kStatusDirGroup 1.3.6.1.4.1.791.2.10.2.43.2.8
OBJECT IDENTIFIER    

w2kStatusDirCount 1.3.6.1.4.1.791.2.10.2.43.2.8.1
&The number of entries in the w2kStatusDirTable.
OBJECT-TYPE    
  INTEGER  

w2kStatusDirTable 1.3.6.1.4.1.791.2.10.2.43.2.8.2
&A table containing information about all monitored directories.
OBJECT-TYPE    
  SEQUENCE OF  
    W2kStatusDirRow

w2kStatusDirEntry 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1
&The table entry.
OBJECT-TYPE    
  W2kStatusDirRow  

w2kStatusDirName 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.1
&Name of the watcher, monitoring a directory with this name. Important: This name is case insensitive.
OBJECT-TYPE    
  DisplayString  

w2kStatusDirDescription 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.2
&Any description for this watcher.
OBJECT-TYPE    
  DisplayString  

w2kStatusDirAggLagValue 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.3
&The number of consecutive poll intervals on which any status was not in the Ok or Up state.
OBJECT-TYPE    
  INTEGER  

w2kStatusDirAggLag 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.4
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
OBJECT-TYPE    
  INTEGER  

w2kStatusDirAggStatus 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.5
&The current status of the directory as a 'worst case' aggregate of all its statuses.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusDirExist 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.6
&Flag indicating whether to raise an alert if a directory is existent or if it is not-existent.
OBJECT-TYPE    
  INTEGER should-exist(1), should-not-exist(2)  

w2kStatusDirExistMonitor 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.7
&Flag indicating whether the existence of the directory should be monitored and if so, the level of alert to raise.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kStatusDirExistStatus 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.8
&The current status of the directory existence.
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down-warning(3), down-critical(4)  

w2kStatusDirTimeValue 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.9
&The current value of the latest timestamp. If the directory does not exist, the timestamp value is set to '1970-01-01 01:00:00'.
OBJECT-TYPE    
  DisplayString  

w2kStatusDirTimeRef 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.10
&The reference timestamp, which is the timestamp of the directory when this watcher was created or when the last 'reset-time' has been made. If the directory does not exist, the reference timestamp is set to '1970-01-01 01:00:00'.
OBJECT-TYPE    
  DisplayString  

w2kStatusDirTimeMonitor 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.11
&Flag indicating whether the latest timestamp (of all files and all subfolders, including the given folder) should be monitored and if so, the level of alert to raise.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kStatusDirTimeStatus 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.12
&The current status of the latest timestamp. The status 'unknown' means that the current value could not be retrieved from the system.
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down-warning(3), down-critical(4)  

w2kStatusDirSizeRef 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.13
&The total size of the directory at the time when this watcher was created (in kilobytes).
OBJECT-TYPE    
  INTEGER  

w2kStatusDirSizeValue 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.14
&The current value of the total directory size (in kilobytes).
OBJECT-TYPE    
  INTEGER  

w2kStatusDirSizeWarnValue 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.15
&The actual warning threshold in kilobytes derived from the configured warning threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusDirSizeCritValue 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.16
&The actual critical threshold in kilobytes derived from the configured critical threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusDirSizeWarn 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.17
&Warning threshold for the total directory size (all files in the given folder and in all subfolders), either in kilobytes or as a percentage value of the original size (by appending a '%'). The original size is the size when this watcher was created. Valid values are greater than 0 and smaller than the critical threshold.
OBJECT-TYPE    
  DisplayString  

w2kStatusDirSizeCrit 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.18
&Critical threshold for the total directory size (all files in the given folder and in all subfolders), either in kilobytes or as a percentage value of the original size (by appending a '%'). The original size is the size when this watcher was created. Valid values are greater than 1 and greater than the warning threshold.
OBJECT-TYPE    
  DisplayString  

w2kStatusDirSizeMonitor 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.19
&Flag indicating whether the total directory size should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusDirSizeStatus 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.20
&The current status of the total directory size as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusDirSizeDValue 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.21
&The current value of the delta in total directory size monitored in the last polling interval (in kilobytes). In case of shrinkage this is a negative number.
OBJECT-TYPE    
  INTEGER  

w2kStatusDirSizeDWarnValue 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.22
&The actual warning threshold in kilobytes derived from the configured warning threshold.
OBJECT-TYPE    
  DisplayString  

w2kStatusDirSizeDCritValue 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.23
&The actual critical threshold in kilobytes derived from the configured critical threshold.
OBJECT-TYPE    
  DisplayString  

w2kStatusDirSizeDWarn 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.24
&Warning threshold, either for the growth (by appending a '+') or for the shrinkage (by appending a '-') or for the absolute delta in total directory size monitored in one poll interval. Growth, shrinkage and absolute delta can be given in kilobytes or as a percentage value of the total directory size (by appending a '%'). Valid values are greater than 0 and smaller than the critical threshold.
OBJECT-TYPE    
  DisplayString  

w2kStatusDirSizeDCrit 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.25
&Critical threshold, either for the growth (by appending a '+') or for the shrinkage (by appending a '-') or for the absolute delta in total directory size monitored in one poll interval. Growth, shrinkage and absolute delta can be given in kilobytes or as a percentage value of the total directory size (by appending a '%'). Valid values are greater than 1 and greater than the warning threshold.
OBJECT-TYPE    
  DisplayString  

w2kStatusDirSizeDMonitor 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.26
&Flag indicating whether the delta in total directory size should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusDirSizeDStatus 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.27
&The current status of the delta in total directory size as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusDirEntryValue 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.28
&The current value of the number of files.
OBJECT-TYPE    
  INTEGER  

w2kStatusDirEntryWarn 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.29
&Warning threshold for the number of entries (sum of files and folders in the given folder and in all subfolders). Valid values are greater than 0 and smaller than the critical threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusDirEntryCrit 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.30
&Critical threshold for the number of entries (sum of files and folders in the given folder and in all subfolders). Valid values are greater than 1 and greater than the warning threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusDirEntryMonitor 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.31
&Flag indicating whether the number of entries should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusDirEntryStatus 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.32
&The current status of the number of entries as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusDirCallBackRef 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.33
&The name of the Call-Back reference that should be invoked in case of a status change.
OBJECT-TYPE    
  DisplayString  

w2kStatusDirButton 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.34
&This attribute is used to remove this watcher or to reset the time reference to the current value.
OBJECT-TYPE    
  INTEGER none(1), remove(2), reset-time(3)  

w2kStatusFileGroup 1.3.6.1.4.1.791.2.10.2.43.2.9
OBJECT IDENTIFIER    

w2kStatusFileCount 1.3.6.1.4.1.791.2.10.2.43.2.9.1
&The number of entries in the w2kStatusFileTable.
OBJECT-TYPE    
  INTEGER  

w2kStatusFileTable 1.3.6.1.4.1.791.2.10.2.43.2.9.2
&A table containing information about all monitored files.
OBJECT-TYPE    
  SEQUENCE OF  
    W2kStatusFileRow

w2kStatusFileEntry 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1
&The table entry.
OBJECT-TYPE    
  W2kStatusFileRow  

w2kStatusFileName 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.1
&Name of the watcher, monitoring a file with this name. Important: This name is case insensitive.
OBJECT-TYPE    
  DisplayString  

w2kStatusFileDescription 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.2
&Any description for this watcher.
OBJECT-TYPE    
  DisplayString  

w2kStatusFileAggLagValue 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.3
&The number of consecutive poll intervals on which any status was not in the Ok or Up state.
OBJECT-TYPE    
  INTEGER  

w2kStatusFileAggLag 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.4
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
OBJECT-TYPE    
  INTEGER  

w2kStatusFileAggStatus 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.5
&The current status of the file as a 'worst case' aggregate of all its statuses.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusFileExist 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.6
&Flag indicating whether to raise an alert if a file is existent or if it is not-existent.
OBJECT-TYPE    
  INTEGER should-exist(1), should-not-exist(2)  

w2kStatusFileExistMonitor 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.7
&Flag indicating whether the existence of the file should be monitored and if so, the level of alert to raise.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kStatusFileExistStatus 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.8
&The current status of the file existence.
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down-warning(3), down-critical(4)  

w2kStatusFileTimeValue 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.9
&The current value of the latest timestamp. If the file does not exist, the timestamp value is set to '1970-01-01 01:00:00'.
OBJECT-TYPE    
  DisplayString  

w2kStatusFileTimeRef 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.10
&The reference timestamp, which is the timestamp of the file when this watcher was created or when the last 'reset-time' has been made. If the file does not exist, the reference timestamp is set to '1970-01-01 01:00:00'.
OBJECT-TYPE    
  DisplayString  

w2kStatusFileTimeMonitor 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.11
&Flag indicating whether the timestamp of the file should be monitored and if so, the level of alert to raise.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kStatusFileTimeStatus 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.12
&The current status of the latest timestamp. The status 'unknown' means that the current value could not be retrieved from the system.
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down-warning(3), down-critical(4)  

w2kStatusFileSizeRef 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.13
&The size of the file at the time when this watcher was created (in kilobytes).
OBJECT-TYPE    
  INTEGER  

w2kStatusFileSizeValue 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.14
&The current value of the file size (in kilobytes).
OBJECT-TYPE    
  INTEGER  

w2kStatusFileSizeWarnValue 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.15
&The actual warning threshold in kilobytes derived from the configured warning threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusFileSizeCritValue 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.16
&The actual critical threshold in kilobytes derived from the configured critical threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusFileSizeWarn 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.17
&Warning threshold for the file size, either in kilobytes or as a percentage value of the original size (by appending a '%'). The original size is the size when this watcher was created. Valid values are greater than 0 and smaller than the critical threshold.
OBJECT-TYPE    
  DisplayString  

w2kStatusFileSizeCrit 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.18
&Critical threshold for the file size, either in kilobytes or as a percentage value of the original size (by appending a '%'). The original size is the size when this watcher was created. Valid values are greater than 1 and greater than the warning threshold.
OBJECT-TYPE    
  DisplayString  

w2kStatusFileSizeMonitor 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.19
&Flag indicating whether the file size should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusFileSizeStatus 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.20
&The current status of the file size as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusFileSizeDValue 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.21
&The current value of the delta in file size monitored in the last polling interval (in kilobytes). In case of shrinkage this is a negative number.
OBJECT-TYPE    
  INTEGER  

w2kStatusFileSizeDWarnValue 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.22
&The actual warning threshold in kilobytes derived from the configured warning threshold.
OBJECT-TYPE    
  DisplayString  

w2kStatusFileSizeDCritValue 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.23
&The actual critical threshold in kilobytes derived from the configured critical threshold.
OBJECT-TYPE    
  DisplayString  

w2kStatusFileSizeDWarn 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.24
&Warning threshold, either for the growth (by appending a '+') or for the shrinkage (by appending a '-') or for the absolute delta in file size monitored in one poll interval. Growth, shrinkage and absolute delta can be given in kilobytes or as a percentage value of the file size (by appending a '%'). Valid values are greater than 0 and smaller than the critical threshold.
OBJECT-TYPE    
  DisplayString  

w2kStatusFileSizeDCrit 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.25
&Critical threshold, either for the growth (by appending a '+') or for the shrinkage (by appending a '-') or for the absolute delta in file size monitored in one poll interval. Growth, shrinkage and absolute delta can be given in kilobytes or as a percentage value of the file size (by appending a '%'). Valid values are greater than 1 and greater than the warning threshold.
OBJECT-TYPE    
  DisplayString  

w2kStatusFileSizeDMonitor 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.26
&Flag indicating whether the delta in file size should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusFileSizeDStatus 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.27
&The current status of the delta in file size as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusFileCallBackRef 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.28
&The name of the Call-Back reference that should be invoked in case of a status change.
OBJECT-TYPE    
  DisplayString  

w2kStatusFileButton 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.29
&This attribute is used to remove this watcher or to reset the time reference to the current value.
OBJECT-TYPE    
  INTEGER none(1), remove(2), reset-time(3)  

w2kStatusProcGroup 1.3.6.1.4.1.791.2.10.2.43.2.10
OBJECT IDENTIFIER    

w2kStatusProcCount 1.3.6.1.4.1.791.2.10.2.43.2.10.1
&The number of entries in the w2kStatusProcTable.
OBJECT-TYPE    
  INTEGER  

w2kStatusProcTable 1.3.6.1.4.1.791.2.10.2.43.2.10.2
&A table containing information about all monitored processes.
OBJECT-TYPE    
  SEQUENCE OF  
    W2kStatusProcRow

w2kStatusProcEntry 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1
&The table entry.
OBJECT-TYPE    
  W2kStatusProcRow  

w2kStatusProcProcName 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.1
&Process name of the watcher, monitoring a process with this process name. An asterisk '*' can be used as process name or can be prepended/appended to it, in order to widen the scope of processes this watcher monitors. Important: This name is case insensitive.
OBJECT-TYPE    
  DisplayString  

w2kStatusProcPathName 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.2
&Path name of the watcher, monitoring a process with this path name. An asterisk '*' can be used as path name or can be prepended/appended to it, in order to widen the scope of processes this watcher monitors. Important: This name is case insensitive.
OBJECT-TYPE    
  DisplayString  

w2kStatusProcUserName 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.3
&User name of the watcher, monitoring a process started by this user. An asterisk '*' can be used as user name or can be prepended/appended to it, in order to widen the scope of processes this watcher monitors. Important: This name is case insensitive.
OBJECT-TYPE    
  DisplayString  

w2kStatusProcDescription 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.4
&Any description for this watcher.
OBJECT-TYPE    
  DisplayString  

w2kStatusProcIds 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.5
&A pipe sign separated list of the ids of those processes, that (b)reach any threshold (except instance metric).
OBJECT-TYPE    
  DisplayString  

w2kStatusProcAggLagValue 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.6
&The number of consecutive poll intervals on which any status was not in the Ok or Up state.
OBJECT-TYPE    
  INTEGER  

w2kStatusProcAggLag 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.7
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
OBJECT-TYPE    
  INTEGER  

w2kStatusProcAggStatus 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.8
&The current status of the process as a 'worst case' aggregate of all its statuses.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusProcInstValue 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.9
&The current value of the process instances number.
OBJECT-TYPE    
  INTEGER  

w2kStatusProcInstMin 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.10
&Minimum threshold for the number of process instances. Valid values are greater than or equal to -1 and smaller than or equal to the maximum threshold. Setting to -1 disables the monitoring of the minimum.
OBJECT-TYPE    
  INTEGER  

w2kStatusProcInstMax 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.11
&Maximum threshold for the number of process instances. Valid values are greater than or equal to -1 and greater than or equal to the minimum threshold. Setting to -1 disables the monitoring of the maximum.
OBJECT-TYPE    
  INTEGER  

w2kStatusProcInstMonitor 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.12
&Flag indicating whether the number of process instances should be monitored and if so, the level of alert to raise.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kStatusProcInstStatus 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.13
&The current status of the process instances number as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down-warning(3), down-critical(4)  

w2kStatusProcChildMinValue 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.14
&The current minimum value of the number of childprocesses of the process. If there is more than one process instance, this value is the minimum of all instances.
OBJECT-TYPE    
  INTEGER  

w2kStatusProcChildMaxValue 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.15
&The current maximum value of the number of childprocesses of the process. If there is more than one process instance, this value is the maximum of all instances.
OBJECT-TYPE    
  INTEGER  

w2kStatusProcChildMin 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.16
&Minimum threshold for the number of childprocesses of the process. If there is more than one process instance, the minimum of all instances is compared with this value. Valid values are greater than or equal to -1 and smaller than or equal to the maximum threshold. Setting to -1 disables the monitoring of the minimum.
OBJECT-TYPE    
  INTEGER  

w2kStatusProcChildMax 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.17
&Maximum threshold for the number of childprocesses of the process. If there is more than one process instance, the maximum of all instances is compared with this value. Valid values are greater than or equal to -1 and greater than or equal to the minimum threshold. Setting to -1 disables the monitoring of the maximum.
OBJECT-TYPE    
  INTEGER  

w2kStatusProcChildMonitor 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.18
&Flag indicating whether the number of childprocesses of the process should be monitored and if so, the level of alert to raise. Note: This metric decreases agent performance much more than any other metric. For this reason the default is 'do-not-monitor'.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kStatusProcChildStatus 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.19
&The current status of the childprocesses number as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down-warning(3), down-critical(4)  

w2kStatusProcThreadMinValue 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.20
&The current minimum value of the number of threads of the process. If there is more than one process instance, this value is the minimum of all instances.
OBJECT-TYPE    
  INTEGER  

w2kStatusProcThreadMaxValue 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.21
&The current maximum value of the number of threads of the process. If there is more than one process instance, this value is the maximum of all instances.
OBJECT-TYPE    
  INTEGER  

w2kStatusProcThreadMin 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.22
&Minimum threshold for the number of threads of the process. If there is more than one process instance, the minimum of all instances is compared with this value. Valid values are greater than or equal to -1 and smaller than or equal to the maximum threshold. Setting to -1 disables the monitoring of the minimum.
OBJECT-TYPE    
  INTEGER  

w2kStatusProcThreadMax 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.23
&Maximum threshold for the number of threads of the process. If there is more than one process instance, the maximum of all instances is compared with this value. Valid values are greater than or equal to -1 and greater than or equal to the minimum threshold. Setting to -1 disables the monitoring of the maximum.
OBJECT-TYPE    
  INTEGER  

w2kStatusProcThreadMonitor 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.24
&Flag indicating whether the number of threads of the process should be monitored and if so, the level of alert to raise.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kStatusProcThreadStatus 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.25
&The current status of the threads number as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down-warning(3), down-critical(4)  

w2kStatusProcMemoryValue 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.26
&The current value of the memory usage of the process (sum of 'Working Set Size' and 'Used Page File' in kilobytes), build as the maximum over all process instances.
OBJECT-TYPE    
  INTEGER  

w2kStatusProcMemoryWarn 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.27
&Warning threshold for the memory usage of the process (in kilobytes). If there is more than one process instance, the maximum of all instances is compared with this value. Valid values are greater than 0 and smaller than the critical threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusProcMemoryCrit 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.28
&Critical threshold for the memory usage of the process (in kilobytes). If there is more than one process instance, the maximum of all instances is compared with this value. Valid values are greater than 1 and greater than the warning threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusProcMemoryMonitor 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.29
&Flag indicating whether the memory usage of the process should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusProcMemoryStatus 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.30
&The current status of the process memory usage as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusProcCpuValue 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.31
&The current value of the CPU usage of the process (as percentage value of 100), build as the maximum over all process instances.
OBJECT-TYPE    
  INTEGER  

w2kStatusProcCpuWarn 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.32
&Warning threshold for the CPU usage of the process (as percentage value of 100). If there is more than one process instance, the maximum of all instances is compared with this value. Valid values are 1 to 99 and smaller than the critical threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusProcCpuCrit 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.33
&Critical threshold for the CPU usage of the process (as percentage value of 100). If there is more than one process instance, the maximum of all instances is compared with this value. Valid values are 2 to 100 and greater than the warning threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusProcCpuMonitor 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.34
&Flag indicating whether the CPU usage of the process should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusProcCpuStatus 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.35
&The current status of the process CPU usage as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusProcCallBackRef 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.36
&The name of the Call-Back reference that should be invoked in case of a status change.
OBJECT-TYPE    
  DisplayString  

w2kStatusProcButton 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.37
&This attribute is used to remove this watcher.
OBJECT-TYPE    
  INTEGER none(1), remove(2)  

w2kStatusSrvcGroup 1.3.6.1.4.1.791.2.10.2.43.2.11
OBJECT IDENTIFIER    

w2kStatusSrvcCount 1.3.6.1.4.1.791.2.10.2.43.2.11.1
&The number of entries in the w2kStatusSrvcTable.
OBJECT-TYPE    
  INTEGER  

w2kStatusSrvcTable 1.3.6.1.4.1.791.2.10.2.43.2.11.2
&A table containing information about all monitored services.
OBJECT-TYPE    
  SEQUENCE OF  
    W2kStatusSrvcRow

w2kStatusSrvcEntry 1.3.6.1.4.1.791.2.10.2.43.2.11.2.1
&The table entry.
OBJECT-TYPE    
  W2kStatusSrvcRow  

w2kStatusSrvcName 1.3.6.1.4.1.791.2.10.2.43.2.11.2.1.1
&Name of the watcher, monitoring a service with this name. Important: This name is case insensitive.
OBJECT-TYPE    
  DisplayString  

w2kStatusSrvcDescription 1.3.6.1.4.1.791.2.10.2.43.2.11.2.1.2
&Any description for this watcher.
OBJECT-TYPE    
  DisplayString  

w2kStatusSrvcDescr 1.3.6.1.4.1.791.2.10.2.43.2.11.2.1.3
&The description of the service.
OBJECT-TYPE    
  DisplayString  

w2kStatusSrvcAutoWatcherName 1.3.6.1.4.1.791.2.10.2.43.2.11.2.1.4
&Name of the auto discovery watcher, which created this watcher.
OBJECT-TYPE    
  DisplayString  

w2kStatusSrvcAggLagValue 1.3.6.1.4.1.791.2.10.2.43.2.11.2.1.5
&The number of consecutive poll intervals on which any status was not in the Ok or Up state.
OBJECT-TYPE    
  INTEGER  

w2kStatusSrvcAggLag 1.3.6.1.4.1.791.2.10.2.43.2.11.2.1.6
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
OBJECT-TYPE    
  INTEGER  

w2kStatusSrvcAggStatus 1.3.6.1.4.1.791.2.10.2.43.2.11.2.1.7
&The current status of the service as a 'worst case' aggregate of all its statuses.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusSrvcExist 1.3.6.1.4.1.791.2.10.2.43.2.11.2.1.8
&Flag indicating whether to raise an alert if a service is existent or if it is not-existent.
OBJECT-TYPE    
  INTEGER should-exist(1), should-not-exist(2)  

w2kStatusSrvcExistMonitor 1.3.6.1.4.1.791.2.10.2.43.2.11.2.1.9
&Flag indicating whether the existence of the service should be monitored and if so, the level of alert to raise.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kStatusSrvcExistStatus 1.3.6.1.4.1.791.2.10.2.43.2.11.2.1.10
&The current status of the service existence.
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down-warning(3), down-critical(4)  

w2kStatusSrvcActiveValue 1.3.6.1.4.1.791.2.10.2.43.2.11.2.1.11
&The current value of the service activity.
OBJECT-TYPE    
  INTEGER unknown(1), active-running(2), active-pausePending(3), active-stopPending(4), notActive-stopped(5), notActive-paused(6), notActive-continuePending(7), notActive-startPending(8)  

w2kStatusSrvcActive 1.3.6.1.4.1.791.2.10.2.43.2.11.2.1.12
&Flag indicating whether to raise an alert if an existent service is active or if it is inactive.
OBJECT-TYPE    
  INTEGER should-be-active(1), should-not-be-active(2)  

w2kStatusSrvcActiveMonitor 1.3.6.1.4.1.791.2.10.2.43.2.11.2.1.13
&Flag indicating whether the activity of the service should be monitored and if so, the level of alert to raise.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kStatusSrvcActiveStatus 1.3.6.1.4.1.791.2.10.2.43.2.11.2.1.14
&The current status of the service activity as determined by the condition. The status 'unknown' means that the current value could not be retrieved from the system.
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down-warning(3), down-critical(4)  

w2kStatusSrvcCallBackRef 1.3.6.1.4.1.791.2.10.2.43.2.11.2.1.15
&The name of the Call-Back reference that should be invoked in case of a status change.
OBJECT-TYPE    
  DisplayString  

w2kStatusSrvcButton 1.3.6.1.4.1.791.2.10.2.43.2.11.2.1.16
&This attribute is used to remove this watcher.
OBJECT-TYPE    
  INTEGER none(1), remove(2)  

w2kStatusJobGroup 1.3.6.1.4.1.791.2.10.2.43.2.12
OBJECT IDENTIFIER    

w2kStatusJobCount 1.3.6.1.4.1.791.2.10.2.43.2.12.1
&The number of entries in the w2kStatusJobTable.
OBJECT-TYPE    
  INTEGER  

w2kStatusJobTable 1.3.6.1.4.1.791.2.10.2.43.2.12.2
&A table containing information about all monitored jobs.
OBJECT-TYPE    
  SEQUENCE OF  
    W2kStatusJobRow

w2kStatusJobEntry 1.3.6.1.4.1.791.2.10.2.43.2.12.2.1
&The table entry.
OBJECT-TYPE    
  W2kStatusJobRow  

w2kStatusJobName 1.3.6.1.4.1.791.2.10.2.43.2.12.2.1.1
&Name of the watcher, monitoring a job with this name. Important: This name is case insensitive.
OBJECT-TYPE    
  DisplayString  

w2kStatusJobDescription 1.3.6.1.4.1.791.2.10.2.43.2.12.2.1.2
&Any description for this watcher.
OBJECT-TYPE    
  DisplayString  

w2kStatusJobAggLagValue 1.3.6.1.4.1.791.2.10.2.43.2.12.2.1.3
&The number of consecutive poll intervals on which any status was not in the Ok or Up state.
OBJECT-TYPE    
  INTEGER  

w2kStatusJobAggLag 1.3.6.1.4.1.791.2.10.2.43.2.12.2.1.4
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
OBJECT-TYPE    
  INTEGER  

w2kStatusJobAggStatus 1.3.6.1.4.1.791.2.10.2.43.2.12.2.1.5
&The current status of the job as a 'worst case' aggregate of all its statuses.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusJobExist 1.3.6.1.4.1.791.2.10.2.43.2.12.2.1.6
&Flag indicating whether to raise an alert if a job is existent or if it is not-existent.
OBJECT-TYPE    
  INTEGER should-exist(1), should-not-exist(2)  

w2kStatusJobExistMonitor 1.3.6.1.4.1.791.2.10.2.43.2.12.2.1.7
&Flag indicating whether the existence of the job should be monitored and if so, the level of alert to raise.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kStatusJobExistStatus 1.3.6.1.4.1.791.2.10.2.43.2.12.2.1.8
&The current status of the job existence.
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down-warning(3), down-critical(4)  

w2kStatusJobProcessValue 1.3.6.1.4.1.791.2.10.2.43.2.12.2.1.9
&The current value of the active processes number.
OBJECT-TYPE    
  INTEGER  

w2kStatusJobProcessMin 1.3.6.1.4.1.791.2.10.2.43.2.12.2.1.10
&Minimum threshold for the number of active processes associated with the job. Valid values are greater than or equal to -1 and smaller than or equal to the maximum threshold. Setting to -1 disables the monitoring of the minimum.
OBJECT-TYPE    
  INTEGER  

w2kStatusJobProcessMax 1.3.6.1.4.1.791.2.10.2.43.2.12.2.1.11
&Maximum threshold for the number of active processes associated with the job. Valid values are greater than or equal to -1 and greater than or equal to the minimum threshold. Setting to -1 disables the monitoring of the maximum.
OBJECT-TYPE    
  INTEGER  

w2kStatusJobProcessMonitor 1.3.6.1.4.1.791.2.10.2.43.2.12.2.1.12
&Flag indicating whether the number of active processes associated with the job should be monitored and if so, the level of alert to raise.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kStatusJobProcessStatus 1.3.6.1.4.1.791.2.10.2.43.2.12.2.1.13
&The current status of the active processes number as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down-warning(3), down-critical(4)  

w2kStatusJobCpuValue 1.3.6.1.4.1.791.2.10.2.43.2.12.2.1.14
&The current value of the job's CPU usage (as percentage value of 100).
OBJECT-TYPE    
  INTEGER  

w2kStatusJobCpuWarn 1.3.6.1.4.1.791.2.10.2.43.2.12.2.1.15
&Warning threshold for the CPU usage of the job (as percentage value of 100). Valid values are 1 to 99 and smaller than the critical threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusJobCpuCrit 1.3.6.1.4.1.791.2.10.2.43.2.12.2.1.16
&Critical threshold for the CPU usage of the job (as percentage value of 100). Valid values are 2 to 100 and greater than the warning threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusJobCpuMonitor 1.3.6.1.4.1.791.2.10.2.43.2.12.2.1.17
&Flag indicating whether the CPU usage of the job should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusJobCpuStatus 1.3.6.1.4.1.791.2.10.2.43.2.12.2.1.18
&The current status of the job's CPU usage as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusJobCallBackRef 1.3.6.1.4.1.791.2.10.2.43.2.12.2.1.19
&The name of the Call-Back reference that should be invoked in case of a status change.
OBJECT-TYPE    
  DisplayString  

w2kStatusJobButton 1.3.6.1.4.1.791.2.10.2.43.2.12.2.1.20
&This attribute is used to remove this watcher.
OBJECT-TYPE    
  INTEGER none(1), remove(2)  

w2kStatusSessGroup 1.3.6.1.4.1.791.2.10.2.43.2.13
OBJECT IDENTIFIER    

w2kStatusSessCount 1.3.6.1.4.1.791.2.10.2.43.2.13.1
&The number of entries in the w2kStatusSessTable.
OBJECT-TYPE    
  INTEGER  

w2kStatusSessTable 1.3.6.1.4.1.791.2.10.2.43.2.13.2
&A table containing information about all monitored sessions.
OBJECT-TYPE    
  SEQUENCE OF  
    W2kStatusSessRow

w2kStatusSessEntry 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1
&The table entry.
OBJECT-TYPE    
  W2kStatusSessRow  

w2kStatusSessClientName 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.1
&Client name of the watcher, monitoring a session with this client name. The client name is the name of the host, from where this session was initiated. An asterisk '*' can be used as client name or can be prepended/appended to it, in order to widen the scope of sessions this watcher monitors. Important: This name is case insensitive.
OBJECT-TYPE    
  DisplayString  

w2kStatusSessUserName 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.2
&User name of the watcher, monitoring a session with this user name. The user name specifies the user, who logged in and is in the form 'domainName\userName'. An asterisk '*' can be used as user name or can be prepended/appended to it, in order to widen the scope of sessions this watcher monitors. Important: This name is case insensitive.
OBJECT-TYPE    
  DisplayString  

w2kStatusSessDescription 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.3
&Any description for this watcher.
OBJECT-TYPE    
  DisplayString  

w2kStatusSessIds 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.4
&A pipe sign separated list of the ids of those sessions, that (b)reach any threshold (except instance metric).
OBJECT-TYPE    
  DisplayString  

w2kStatusSessAggLagValue 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.5
&The number of consecutive poll intervals on which any status was not in the Ok or Up state.
OBJECT-TYPE    
  INTEGER  

w2kStatusSessAggLag 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.6
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
OBJECT-TYPE    
  INTEGER  

w2kStatusSessAggStatus 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.7
&The current status of the session as a 'worst case' aggregate of all its statuses.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusSessInstValue 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.8
&The current value of the session instances number.
OBJECT-TYPE    
  INTEGER  

w2kStatusSessInstMin 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.9
&Minimum threshold for the number of session instances. Valid values are greater than or equal to -1 and smaller than or equal to the maximum threshold. Setting to -1 disables the monitoring of the minimum.
OBJECT-TYPE    
  INTEGER  

w2kStatusSessInstMax 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.10
&Maximum threshold for the number of session instances. Valid values are greater than or equal to -1 and greater than or equal to the minimum threshold. Setting to -1 disables the monitoring of the maximum.
OBJECT-TYPE    
  INTEGER  

w2kStatusSessInstMonitor 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.11
&Flag indicating whether the number of session instances should be monitored and if so, the level of alert to raise.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kStatusSessInstStatus 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.12
&The current status of the session instances number as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down-warning(3), down-critical(4)  

w2kStatusSessMemoryValue 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.13
&The current value of the session's memory usage (sum of 'Working Set Size' and 'Used Page File' in kilobytes), build as the maximum over all session instances.
OBJECT-TYPE    
  INTEGER  

w2kStatusSessMemoryWarn 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.14
&Warning threshold for the memory usage of the session (in kilobytes). If there is more than one session instance, the maximum of all instances is compared with this value. Valid values are greater than 0 and smaller than the critical threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusSessMemoryCrit 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.15
&Critical threshold for the memory usage of the session (in kilobytes). If there is more than one session instance, the maximum of all instances is compared with this value. Valid values are greater than 1 and greater than the warning threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusSessMemoryMonitor 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.16
&Flag indicating whether the memory usage of the session should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusSessMemoryStatus 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.17
&The current status of the session's memory usage as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusSessCpuValue 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.18
&The current value of the session's CPU usage (as percentage value of 100), build as the maximum over all session instances.
OBJECT-TYPE    
  INTEGER  

w2kStatusSessCpuWarn 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.19
&Warning threshold for the CPU usage of the session (as percentage value of 100). If there is more than one session instance, the maximum of all instances is compared with this value. Valid values are 1 to 99 and smaller than the critical threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusSessCpuCrit 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.20
&Critical threshold for the CPU usage of the session (as percentage value of 100). If there is more than one session instance, the maximum of all instances is compared with this value. Valid values are 2 to 100 and greater than the warning threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusSessCpuMonitor 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.21
&Flag indicating whether the CPU usage of the session should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusSessCpuStatus 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.22
&The current status of the session's CPU usage as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusSessCallBackRef 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.23
&The name of the Call-Back reference that should be invoked in case of a status change.
OBJECT-TYPE    
  DisplayString  

w2kStatusSessButton 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.24
&This attribute is used to remove this watcher.
OBJECT-TYPE    
  INTEGER none(1), remove(2)  

w2kStatusPrnGroup 1.3.6.1.4.1.791.2.10.2.43.2.14
OBJECT IDENTIFIER    

w2kStatusPrnCount 1.3.6.1.4.1.791.2.10.2.43.2.14.1
&The number of entries in the w2kStatusPrnTable.
OBJECT-TYPE    
  INTEGER  

w2kStatusPrnTable 1.3.6.1.4.1.791.2.10.2.43.2.14.2
&A table containing information about all monitored printers.
OBJECT-TYPE    
  SEQUENCE OF  
    W2kStatusPrnRow

w2kStatusPrnEntry 1.3.6.1.4.1.791.2.10.2.43.2.14.2.1
&The table entry.
OBJECT-TYPE    
  W2kStatusPrnRow  

w2kStatusPrnName 1.3.6.1.4.1.791.2.10.2.43.2.14.2.1.1
&Name of the watcher, monitoring a local printer with this name. Important: This name is case insensitive.
OBJECT-TYPE    
  DisplayString  

w2kStatusPrnDescription 1.3.6.1.4.1.791.2.10.2.43.2.14.2.1.2
&Any description for this watcher.
OBJECT-TYPE    
  DisplayString  

w2kStatusPrnAutoWatcherName 1.3.6.1.4.1.791.2.10.2.43.2.14.2.1.3
&Name of the auto discovery watcher, which created this watcher.
OBJECT-TYPE    
  DisplayString  

w2kStatusPrnAggLagValue 1.3.6.1.4.1.791.2.10.2.43.2.14.2.1.4
&The number of consecutive poll intervals on which any status was not in the Ok or Up state.
OBJECT-TYPE    
  INTEGER  

w2kStatusPrnAggLag 1.3.6.1.4.1.791.2.10.2.43.2.14.2.1.5
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
OBJECT-TYPE    
  INTEGER  

w2kStatusPrnAggStatus 1.3.6.1.4.1.791.2.10.2.43.2.14.2.1.6
&The current status of the printer as a 'worst case' aggregate of all its statuses.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusPrnEventDescr 1.3.6.1.4.1.791.2.10.2.43.2.14.2.1.7
&The description of the last printer event. Note: Printer events can only be determined if there is a printing job in the printers queue.
OBJECT-TYPE    
  INTEGER unknown-no-print-jobs(1), printing(2), paper-error(3), toner-error(4), manual(5), offline(6), paused(7), software-error(8), general-error(9)  

w2kStatusPrnEventMonitor 1.3.6.1.4.1.791.2.10.2.43.2.14.2.1.8
&Flag indicating whether the occurence of printer events should be monitored and if so, the level of alert to raise.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kStatusPrnEventStatus 1.3.6.1.4.1.791.2.10.2.43.2.14.2.1.9
&The current status of the printer event monitoring. Note: Printer events can only be determined if there is a printing job in the printers queue. The status 'unknown' means that the current value could not be retrieved from the system.
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down-warning(3), down-critical(4)  

w2kStatusPrnQueueValue 1.3.6.1.4.1.791.2.10.2.43.2.14.2.1.10
&The current value of jobs in the printer's queue.
OBJECT-TYPE    
  INTEGER  

w2kStatusPrnQueueWarn 1.3.6.1.4.1.791.2.10.2.43.2.14.2.1.11
&Warning threshold for the number of jobs in the printer's queue. Valid values are greater than 0 and smaller than the critical threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusPrnQueueCrit 1.3.6.1.4.1.791.2.10.2.43.2.14.2.1.12
&Critical threshold for the number of jobs in the printer's queue. Valid values are greater than 1 and greater than the warning threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusPrnQueueMonitor 1.3.6.1.4.1.791.2.10.2.43.2.14.2.1.13
&Flag indicating whether the printer's job queue should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusPrnQueueStatus 1.3.6.1.4.1.791.2.10.2.43.2.14.2.1.14
&The current status of the printer queue as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusPrnLossAction 1.3.6.1.4.1.791.2.10.2.43.2.14.2.1.15
&Flag defining the severity if the loss of the printer is detected or whether to remove this watcher in that case.
OBJECT-TYPE    
  INTEGER remove(1), up(2), down-warning(3), down-critical(4)  

w2kStatusPrnLossStatus 1.3.6.1.4.1.791.2.10.2.43.2.14.2.1.16
&The current status of the printer's loss as determined by the loss action.
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down-warning(3), down-critical(4)  

w2kStatusPrnCallBackRef 1.3.6.1.4.1.791.2.10.2.43.2.14.2.1.17
&The name of the Call-Back reference that should be invoked in case of a status change.
OBJECT-TYPE    
  DisplayString  

w2kStatusPrnButton 1.3.6.1.4.1.791.2.10.2.43.2.14.2.1.18
&This attribute is used to remove this watcher.
OBJECT-TYPE    
  INTEGER none(1), remove(2)  

w2kStatusNetGroup 1.3.6.1.4.1.791.2.10.2.43.2.15
OBJECT IDENTIFIER    

w2kStatusNetTotalAggLagValue 1.3.6.1.4.1.791.2.10.2.43.2.15.1
&The number of consecutive poll intervals on which any status was not in the Ok or Up state.
OBJECT-TYPE    
  INTEGER  

w2kStatusNetTotalAggLag 1.3.6.1.4.1.791.2.10.2.43.2.15.2
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
OBJECT-TYPE    
  INTEGER  

w2kStatusNetTotalAggStatus 1.3.6.1.4.1.791.2.10.2.43.2.15.3
&The current status of the network interfaces total as a 'worst case' aggregate of all total statuses.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusNetTotalInPktValue 1.3.6.1.4.1.791.2.10.2.43.2.15.4
&The current total value of the received packets rate (packets per second). The total value is the sum of all network interfaces (except the loopback interface).
OBJECT-TYPE    
  INTEGER  

w2kStatusNetTotalInPktWarn 1.3.6.1.4.1.791.2.10.2.43.2.15.5
&Warning threshold for the total rate of received packets over TCP/IP connections (packets per second). Valid values are greater than 0 and smaller than the critical threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusNetTotalInPktCrit 1.3.6.1.4.1.791.2.10.2.43.2.15.6
&Critical threshold for the total rate of received packets over TCP/IP connections (packets per second). Valid values are greater than 1 and greater than the warning threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusNetTotalInPktMonitor 1.3.6.1.4.1.791.2.10.2.43.2.15.7
&Flag indicating whether the total rate of received packets should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusNetTotalInPktStatus 1.3.6.1.4.1.791.2.10.2.43.2.15.8
&The current status of the total received packets rate as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusNetTotalOutPktValue 1.3.6.1.4.1.791.2.10.2.43.2.15.9
&The current total value of the sent packets rate (packets per second). The total value is the sum of all network interfaces (except the loopback interface).
OBJECT-TYPE    
  INTEGER  

w2kStatusNetTotalOutPktWarn 1.3.6.1.4.1.791.2.10.2.43.2.15.10
&Warning threshold for the total rate of sent packets over TCP/IP connections (packets per second). Valid values are greater than 0 and smaller than the critical threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusNetTotalOutPktCrit 1.3.6.1.4.1.791.2.10.2.43.2.15.11
&Critical threshold for the total rate of sent packets over TCP/IP connections (packets per second). Valid values are greater than 1 and greater than the warning threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusNetTotalOutPktMonitor 1.3.6.1.4.1.791.2.10.2.43.2.15.12
&Flag indicating whether the total rate of sent packets should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusNetTotalOutPktStatus 1.3.6.1.4.1.791.2.10.2.43.2.15.13
&The current status of the total sent packets rate as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusNetTotalInErrDValue 1.3.6.1.4.1.791.2.10.2.43.2.15.14
&The current total value of the received errors rate (errors per poll interval). The total value is the sum of all network interfaces (except the loopback interface).
OBJECT-TYPE    
  INTEGER  

w2kStatusNetTotalInErrDWarn 1.3.6.1.4.1.791.2.10.2.43.2.15.15
&Warning threshold for the total rate of received errors over TCP/IP connections (errors per poll interval). Valid values are greater than 0 and smaller than the critical threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusNetTotalInErrDCrit 1.3.6.1.4.1.791.2.10.2.43.2.15.16
&Critical threshold for the total rate of received errors over TCP/IP connections (errors per poll interval). Valid values are greater than 1 and greater than the warning threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusNetTotalInErrDMonitor 1.3.6.1.4.1.791.2.10.2.43.2.15.17
&Flag indicating whether the total rate of received errors should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusNetTotalInErrDStatus 1.3.6.1.4.1.791.2.10.2.43.2.15.18
&The current status of the total received errors rate as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusNetTotalOutErrDValue 1.3.6.1.4.1.791.2.10.2.43.2.15.19
&The current total value of the sent errors rate (errors per poll interval). The total value is the sum of all network interfaces (except the loopback interface).
OBJECT-TYPE    
  INTEGER  

w2kStatusNetTotalOutErrDWarn 1.3.6.1.4.1.791.2.10.2.43.2.15.20
&Warning threshold for the total rate of sent errors over TCP/IP connections (errors per poll interval). Valid values are greater than 0 and smaller than the critical threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusNetTotalOutErrDCrit 1.3.6.1.4.1.791.2.10.2.43.2.15.21
&Critical threshold for the total rate of sent errors over TCP/IP connections (errors per poll interval). Valid values are greater than 1 and greater than the warning threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusNetTotalOutErrDMonitor 1.3.6.1.4.1.791.2.10.2.43.2.15.22
&Flag indicating whether the total rate of sent errors should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusNetTotalOutErrDStatus 1.3.6.1.4.1.791.2.10.2.43.2.15.23
&The current status of the total sent errors rate as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusNetTotalCallBackRef 1.3.6.1.4.1.791.2.10.2.43.2.15.24
&The name of the Call-Back reference that should be invoked in case of a status change.
OBJECT-TYPE    
  DisplayString  

w2kStatusNetCount 1.3.6.1.4.1.791.2.10.2.43.2.15.25
&The number of entries in the w2kStatusNetTable.
OBJECT-TYPE    
  INTEGER  

w2kStatusNetTable 1.3.6.1.4.1.791.2.10.2.43.2.15.26
&A table containing information about all monitored network interfaces.
OBJECT-TYPE    
  SEQUENCE OF  
    W2kStatusNetRow

w2kStatusNetEntry 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1
&The table entry.
OBJECT-TYPE    
  W2kStatusNetRow  

w2kStatusNetName 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.1
&Name of the watcher, monitoring a network interface with this name.
OBJECT-TYPE    
  DisplayString  

w2kStatusNetAggLagValue 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.2
&The number of consecutive poll intervals on which any status was not in the Ok or Up state.
OBJECT-TYPE    
  INTEGER  

w2kStatusNetAggLag 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.3
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
OBJECT-TYPE    
  INTEGER  

w2kStatusNetAggStatus 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.4
&The current status of the network interface as a 'worst case' aggregate of all its statuses.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusNetInPktValue 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.5
&The current value of the received packets rate (packets per second).
OBJECT-TYPE    
  INTEGER  

w2kStatusNetInPktWarn 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.6
&Warning threshold for the rate of received packets over TCP/IP connections (packets per second). Valid values are greater than 0 and smaller than the critical threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusNetInPktCrit 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.7
&Critical threshold for the rate of received packets over TCP/IP connections (packets per second). Valid values are greater than 1 and greater than the warning threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusNetInPktMonitor 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.8
&Flag indicating whether the received packets rate should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusNetInPktStatus 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.9
&The current status of the received packets rate as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusNetOutPktValue 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.10
&The current value of the sent packets rate (packets per second).
OBJECT-TYPE    
  INTEGER  

w2kStatusNetOutPktWarn 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.11
&Warning threshold for the rate of sent packets over TCP/IP connections (packets per second). Valid values are greater than 0 and smaller than the critical threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusNetOutPktCrit 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.12
&Critical threshold for the rate of sent packets over TCP/IP connections (packets per second). Valid values are greater than 1 and greater than the warning threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusNetOutPktMonitor 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.13
&Flag indicating whether the sent packets rate should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusNetOutPktStatus 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.14
&The current status of the sent packets rate as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusNetInErrDValue 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.15
&The current value of the received errors rate (errors per poll interval).
OBJECT-TYPE    
  INTEGER  

w2kStatusNetInErrDWarn 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.16
&Warning threshold for the rate of received errors over TCP/IP connections (errors per poll interval). Valid values are greater than 0 and smaller than the critical threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusNetInErrDCrit 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.17
&Critical threshold for the rate of received errors over TCP/IP connections (errors per poll interval). Valid values are greater than 1 and greater than the warning threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusNetInErrDMonitor 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.18
&Flag indicating whether the received errors rate should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusNetInErrDStatus 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.19
&The current status of the received errors rate as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusNetOutErrDValue 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.20
&The current value of the sent errors rate (errors per poll interval).
OBJECT-TYPE    
  INTEGER  

w2kStatusNetOutErrDWarn 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.21
&Warning threshold for the rate of sent errors over TCP/IP connections (errors per poll interval). Valid values are greater than 0 and smaller than the critical threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusNetOutErrDCrit 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.22
&Critical threshold for the rate of sent errors over TCP/IP connections (errors per poll interval). Valid values are greater than 1 and greater than the warning threshold.
OBJECT-TYPE    
  INTEGER  

w2kStatusNetOutErrDMonitor 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.23
&Flag indicating whether the sent errors rate should be monitored and if so, which threshold should be compared with.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusNetOutErrDStatus 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.24
&The current status of the sent errors rate as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusNetLossAction 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.25
&Flag defining the severity if the loss of the network interface is detected or whether to remove this watcher in that case.
OBJECT-TYPE    
  INTEGER remove(1), up(2), down-warning(3), down-critical(4)  

w2kStatusNetLossStatus 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.26
&The current status of the network interface's loss as determined by the loss action.
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down-warning(3), down-critical(4)  

w2kStatusNetCallBackRef 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.27
&The name of the Call-Back reference that should be invoked in case of a status change.
OBJECT-TYPE    
  DisplayString  

w2kStatusRegGroup 1.3.6.1.4.1.791.2.10.2.43.2.16
OBJECT IDENTIFIER    

w2kStatusRegCount 1.3.6.1.4.1.791.2.10.2.43.2.16.1
&The number of entries in the w2kStatusRegTable.
OBJECT-TYPE    
  INTEGER  

w2kStatusRegTable 1.3.6.1.4.1.791.2.10.2.43.2.16.2
&A table containing information about all monitored registry entries.
OBJECT-TYPE    
  SEQUENCE OF  
    W2kStatusRegRow

w2kStatusRegEntry 1.3.6.1.4.1.791.2.10.2.43.2.16.2.1
&The table entry.
OBJECT-TYPE    
  W2kStatusRegRow  

w2kStatusRegName 1.3.6.1.4.1.791.2.10.2.43.2.16.2.1.1
&Name of the watcher, monitoring a registry entry with this name. The name is the complete registry path ending with the registry leaf name. If the leaf name contains a backslash, the leaf name must be quoted with double quotes. Important: This name is case insensitive.
OBJECT-TYPE    
  DisplayString  

w2kStatusRegDescription 1.3.6.1.4.1.791.2.10.2.43.2.16.2.1.2
&Any description for this watcher.
OBJECT-TYPE    
  DisplayString  

w2kStatusRegAggLagValue 1.3.6.1.4.1.791.2.10.2.43.2.16.2.1.3
&The number of consecutive poll intervals on which any status was not in the Ok or Up state.
OBJECT-TYPE    
  INTEGER  

w2kStatusRegAggLag 1.3.6.1.4.1.791.2.10.2.43.2.16.2.1.4
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
OBJECT-TYPE    
  INTEGER  

w2kStatusRegAggStatus 1.3.6.1.4.1.791.2.10.2.43.2.16.2.1.5
&The current status of the registry entry as a 'worst case' aggregate of all its statuses.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusRegExist 1.3.6.1.4.1.791.2.10.2.43.2.16.2.1.6
&Flag indicating whether to raise an alert if a registry entry is existent or if it is not-existent.
OBJECT-TYPE    
  INTEGER should-exist(1), should-not-exist(2)  

w2kStatusRegExistMonitor 1.3.6.1.4.1.791.2.10.2.43.2.16.2.1.7
&Flag indicating whether the existence of the registry entry should be monitored and if so, the level of alert to raise.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kStatusRegExistStatus 1.3.6.1.4.1.791.2.10.2.43.2.16.2.1.8
&The current status of the registry entry existence.
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down-warning(3), down-critical(4)  

w2kStatusRegValueValue 1.3.6.1.4.1.791.2.10.2.43.2.16.2.1.9
&The current value of the registry entry.
OBJECT-TYPE    
  DisplayString  

w2kStatusRegValueType 1.3.6.1.4.1.791.2.10.2.43.2.16.2.1.10
&The current type of the registry entry.
OBJECT-TYPE    
  INTEGER string(1), binary(2), dword(3), unknown(4)  

w2kStatusRegValueRef 1.3.6.1.4.1.791.2.10.2.43.2.16.2.1.11
&This attribute is used as the reference value the registry entry is compared with. If the condition is one of 'should-be-equal', 'should-not-be-equal', 'should-be-below' or 'should-be-above', this reference value must be set by the user. In case of 'should-not-change', by setting the status button attribute to 'reset-value', the reference value is set to the current value of the registry entry.
OBJECT-TYPE    
  DisplayString  

w2kStatusRegValueCond 1.3.6.1.4.1.791.2.10.2.43.2.16.2.1.12
&Flag indicating whether to raise an alert if a registry entry does not fullfill the given condition compared with the reference value attribute. 'should-be-below' and 'should-be-above' is only allowed for entries with type DWORD. For entries with type Binary 'should-not-change' is the only possible value.
OBJECT-TYPE    
  INTEGER should-be-equal(1), should-not-be-equal(2), should-be-below(3), should-be-above(4), should-not-change(5)  

w2kStatusRegValueMonitor 1.3.6.1.4.1.791.2.10.2.43.2.16.2.1.13
&Flag indicating whether the value of the registry entry should be monitored and if so, the level of alert to raise.
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kStatusRegValueStatus 1.3.6.1.4.1.791.2.10.2.43.2.16.2.1.14
&The current status of the registry entry as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down-warning(3), down-critical(4)  

w2kStatusRegCallBackRef 1.3.6.1.4.1.791.2.10.2.43.2.16.2.1.15
&The name of the Call-Back reference that should be invoked in case of a status change.
OBJECT-TYPE    
  DisplayString  

w2kStatusRegButton 1.3.6.1.4.1.791.2.10.2.43.2.16.2.1.16
&This attribute is used to remove this watcher or to reset the value reference to the current value of the registry entry. The 'reset-value' is only possible in case the condition is 'should-not-change'.
OBJECT-TYPE    
  INTEGER none(1), remove(2), reset-value(3)  

w2kAvailableGroup 1.3.6.1.4.1.791.2.10.2.43.3
OBJECT IDENTIFIER    

w2kAvailLVolGroup 1.3.6.1.4.1.791.2.10.2.43.3.1
OBJECT IDENTIFIER    

w2kAvailLVolRefresh 1.3.6.1.4.1.791.2.10.2.43.3.1.1
&Set this value to 'refresh' to let the agent check again for all current logical volumes. The user can not set the value to 'none'.
OBJECT-TYPE    
  INTEGER none(1), refresh(2)  

w2kAvailLVolCount 1.3.6.1.4.1.791.2.10.2.43.3.1.2
&The number of currently available logical volumes.
OBJECT-TYPE    
  INTEGER  

w2kAvailLVolTable 1.3.6.1.4.1.791.2.10.2.43.3.1.3
&A table containing the logical volumes available for monitoring.
OBJECT-TYPE    
  SEQUENCE OF  
    W2kAvailLVolRow

w2kAvailLVolEntry 1.3.6.1.4.1.791.2.10.2.43.3.1.3.1
&The table entry.
OBJECT-TYPE    
  W2kAvailLVolRow  

w2kAvailLVolName 1.3.6.1.4.1.791.2.10.2.43.3.1.3.1.1
&The name of the logical volume.
OBJECT-TYPE    
  DisplayString  

w2kAvailLVolMounts 1.3.6.1.4.1.791.2.10.2.43.3.1.3.1.2
&A list of the mount points, where this logical volume is mounted on.
OBJECT-TYPE    
  DisplayString  

w2kAvailLVolInfo 1.3.6.1.4.1.791.2.10.2.43.3.1.3.1.3
&Information about the format (e.g. NTFS), the alternate name (e.g. used in PerfMon) and the label of the logical volume. The alternate name may be empty. The single values are delimited by a pipe sign.
OBJECT-TYPE    
  DisplayString  

w2kAvailLVolTime 1.3.6.1.4.1.791.2.10.2.43.3.1.3.1.4
&The time when the agent discovered this logical volume and put it into this table.
OBJECT-TYPE    
  DisplayString  

w2kAvailMntGroup 1.3.6.1.4.1.791.2.10.2.43.3.2
OBJECT IDENTIFIER    

w2kAvailMntRefresh 1.3.6.1.4.1.791.2.10.2.43.3.2.1
&Set this value to 'refresh' to let the agent check again for all current mounts. The user can not set the value to 'none'.
OBJECT-TYPE    
  INTEGER none(1), refresh(2)  

w2kAvailMntCount 1.3.6.1.4.1.791.2.10.2.43.3.2.2
&The number of currently available mounts.
OBJECT-TYPE    
  INTEGER  

w2kAvailMntTable 1.3.6.1.4.1.791.2.10.2.43.3.2.3
&A table containing the mounts available for monitoring.
OBJECT-TYPE    
  SEQUENCE OF  
    W2kAvailMntRow

w2kAvailMntEntry 1.3.6.1.4.1.791.2.10.2.43.3.2.3.1
&The table entry.
OBJECT-TYPE    
  W2kAvailMntRow  

w2kAvailMntName 1.3.6.1.4.1.791.2.10.2.43.3.2.3.1.1
&The name of the mount.
OBJECT-TYPE    
  DisplayString  

w2kAvailMntRelTo 1.3.6.1.4.1.791.2.10.2.43.3.2.3.1.2
&The name of the current logical volume, which this mount is mounting.
OBJECT-TYPE    
  DisplayString  

w2kAvailMntTime 1.3.6.1.4.1.791.2.10.2.43.3.2.3.1.3
&The time when the agent discovered this mount and put it into this table.
OBJECT-TYPE    
  DisplayString  

w2kAvailDfsGroup 1.3.6.1.4.1.791.2.10.2.43.3.3
OBJECT IDENTIFIER    

w2kAvailDfsRefresh 1.3.6.1.4.1.791.2.10.2.43.3.3.1
&Set this value to 'refresh' to let the agent check again for all current distributed file system links. The user can not set the value to 'none'.
OBJECT-TYPE    
  INTEGER none(1), refresh(2)  

w2kAvailDfsCount 1.3.6.1.4.1.791.2.10.2.43.3.3.2
&The number of currently available distributed file system links.
OBJECT-TYPE    
  INTEGER  

w2kAvailDfsTable 1.3.6.1.4.1.791.2.10.2.43.3.3.3
&A table containing the distributed file system links available for monitoring.
OBJECT-TYPE    
  SEQUENCE OF  
    W2kAvailDfsRow

w2kAvailDfsEntry 1.3.6.1.4.1.791.2.10.2.43.3.3.3.1
&The table entry.
OBJECT-TYPE    
  W2kAvailDfsRow  

w2kAvailDfsName 1.3.6.1.4.1.791.2.10.2.43.3.3.3.1.1
&The name of the distributed file system link. The name consists of the distributed file system root name followed by the Dfs link name. These two names are concatenated by a back-slash.
OBJECT-TYPE    
  DisplayString  

w2kAvailDfsTime 1.3.6.1.4.1.791.2.10.2.43.3.3.3.1.2
&The time when the agent discovered this distributed file system link and put it into this table.
OBJECT-TYPE    
  DisplayString  

w2kAvailQuotGroup 1.3.6.1.4.1.791.2.10.2.43.3.4
OBJECT IDENTIFIER    

w2kAvailQuotRefresh 1.3.6.1.4.1.791.2.10.2.43.3.4.1
&Set this value to 'refresh' to let the agent check again for all current quotas. The user can not set the value to 'none'.
OBJECT-TYPE    
  INTEGER none(1), refresh(2)  

w2kAvailQuotCount 1.3.6.1.4.1.791.2.10.2.43.3.4.2
&The number of currently available quotas.
OBJECT-TYPE    
  INTEGER  

w2kAvailQuotTable 1.3.6.1.4.1.791.2.10.2.43.3.4.3
&A table containing the quotas available for monitoring.
OBJECT-TYPE    
  SEQUENCE OF  
    W2kAvailQuotRow

w2kAvailQuotEntry 1.3.6.1.4.1.791.2.10.2.43.3.4.3.1
&The table entry.
OBJECT-TYPE    
  W2kAvailQuotRow  

w2kAvailQuotLVolName 1.3.6.1.4.1.791.2.10.2.43.3.4.3.1.1
&The name of the logical volume on which this quota exists.
OBJECT-TYPE    
  DisplayString  

w2kAvailQuotUserName 1.3.6.1.4.1.791.2.10.2.43.3.4.3.1.2
&The user name for whom this quota exists. The name is in the form 'domainName\userName' or 'userName@domainName'.
OBJECT-TYPE    
  DisplayString  

w2kAvailQuotWarnLevel 1.3.6.1.4.1.791.2.10.2.43.3.4.3.1.3
&The quota warning level for this user, as defined in the Windows 2000 quota management. Management applications adding a watcher for this quota should use this value as default warning threshold instead of the value stored in the config group.
OBJECT-TYPE    
  INTEGER  

w2kAvailQuotLimit 1.3.6.1.4.1.791.2.10.2.43.3.4.3.1.4
&The quota limit for this user, as defined in the Windows 2000 quota management. Management applications adding a watcher for this quota should use this value as default critical threshold instead of the value stored in the config group.
OBJECT-TYPE    
  INTEGER  

w2kAvailQuotTime 1.3.6.1.4.1.791.2.10.2.43.3.4.3.1.5
&The time when the agent discovered this quota and put it into this table.
OBJECT-TYPE    
  DisplayString  

w2kAvailProcGroup 1.3.6.1.4.1.791.2.10.2.43.3.5
OBJECT IDENTIFIER    

w2kAvailProcRefresh 1.3.6.1.4.1.791.2.10.2.43.3.5.1
&Set this value to 'refresh' to let the agent check again for all current processes. The user can not set the value to 'none'.
OBJECT-TYPE    
  INTEGER none(1), refresh(2)  

w2kAvailProcCount 1.3.6.1.4.1.791.2.10.2.43.3.5.2
&The number of currently available processes.
OBJECT-TYPE    
  INTEGER  

w2kAvailProcTable 1.3.6.1.4.1.791.2.10.2.43.3.5.3
&A table containing the processes available for monitoring.
OBJECT-TYPE    
  SEQUENCE OF  
    W2kAvailProcRow

w2kAvailProcEntry 1.3.6.1.4.1.791.2.10.2.43.3.5.3.1
&The table entry.
OBJECT-TYPE    
  W2kAvailProcRow  

w2kAvailProcProcName 1.3.6.1.4.1.791.2.10.2.43.3.5.3.1.1
&The process name of the process.
OBJECT-TYPE    
  DisplayString  

w2kAvailProcPathName 1.3.6.1.4.1.791.2.10.2.43.3.5.3.1.2
&The path name of the process.
OBJECT-TYPE    
  DisplayString  

w2kAvailProcUserName 1.3.6.1.4.1.791.2.10.2.43.3.5.3.1.3
&The user name of the process.
OBJECT-TYPE    
  DisplayString  

w2kAvailProcTime 1.3.6.1.4.1.791.2.10.2.43.3.5.3.1.4
&The time when the agent discovered this process and put it into this table.
OBJECT-TYPE    
  DisplayString  

w2kAvailSrvcGroup 1.3.6.1.4.1.791.2.10.2.43.3.6
OBJECT IDENTIFIER    

w2kAvailSrvcRefresh 1.3.6.1.4.1.791.2.10.2.43.3.6.1
&Set this value to 'refresh' to let the agent check again for all current services. The user can not set the value to 'none'.
OBJECT-TYPE    
  INTEGER none(1), refresh(2)  

w2kAvailSrvcCount 1.3.6.1.4.1.791.2.10.2.43.3.6.2
&The number of currently available services.
OBJECT-TYPE    
  INTEGER  

w2kAvailSrvcTable 1.3.6.1.4.1.791.2.10.2.43.3.6.3
&A table containing the services available for monitoring.
OBJECT-TYPE    
  SEQUENCE OF  
    W2kAvailSrvcRow

w2kAvailSrvcEntry 1.3.6.1.4.1.791.2.10.2.43.3.6.3.1
&The table entry.
OBJECT-TYPE    
  W2kAvailSrvcRow  

w2kAvailSrvcName 1.3.6.1.4.1.791.2.10.2.43.3.6.3.1.1
&The name of the service.
OBJECT-TYPE    
  DisplayString  

w2kAvailSrvcDescr 1.3.6.1.4.1.791.2.10.2.43.3.6.3.1.2
&The description of the service.
OBJECT-TYPE    
  DisplayString  

w2kAvailSrvcTime 1.3.6.1.4.1.791.2.10.2.43.3.6.3.1.3
&The time when the agent discovered this service and put it into this table.
OBJECT-TYPE    
  DisplayString  

w2kAvailJobGroup 1.3.6.1.4.1.791.2.10.2.43.3.7
OBJECT IDENTIFIER    

w2kAvailJobRefresh 1.3.6.1.4.1.791.2.10.2.43.3.7.1
&Set this value to 'refresh' to let the agent check again for all current jobs. The user can not set the value to 'none'.
OBJECT-TYPE    
  INTEGER none(1), refresh(2)  

w2kAvailJobCount 1.3.6.1.4.1.791.2.10.2.43.3.7.2
&The number of currently available jobs.
OBJECT-TYPE    
  INTEGER  

w2kAvailJobTable 1.3.6.1.4.1.791.2.10.2.43.3.7.3
&A table containing the jobs available for monitoring.
OBJECT-TYPE    
  SEQUENCE OF  
    W2kAvailJobRow

w2kAvailJobEntry 1.3.6.1.4.1.791.2.10.2.43.3.7.3.1
&The table entry.
OBJECT-TYPE    
  W2kAvailJobRow  

w2kAvailJobName 1.3.6.1.4.1.791.2.10.2.43.3.7.3.1.1
&The name of the job.
OBJECT-TYPE    
  DisplayString  

w2kAvailJobTime 1.3.6.1.4.1.791.2.10.2.43.3.7.3.1.2
&The time when the agent discovered this job and put it into this table.
OBJECT-TYPE    
  DisplayString  

w2kAvailSessGroup 1.3.6.1.4.1.791.2.10.2.43.3.8
OBJECT IDENTIFIER    

w2kAvailSessRefresh 1.3.6.1.4.1.791.2.10.2.43.3.8.1
&Set this value to 'refresh' to let the agent check again for all current sessions. The user can not set the value to 'none'.
OBJECT-TYPE    
  INTEGER none(1), refresh(2)  

w2kAvailSessCount 1.3.6.1.4.1.791.2.10.2.43.3.8.2
&The number of currently available sessions.
OBJECT-TYPE    
  INTEGER  

w2kAvailSessTable 1.3.6.1.4.1.791.2.10.2.43.3.8.3
&A table containing the sessions available for monitoring.
OBJECT-TYPE    
  SEQUENCE OF  
    W2kAvailSessRow

w2kAvailSessEntry 1.3.6.1.4.1.791.2.10.2.43.3.8.3.1
&The table entry.
OBJECT-TYPE    
  W2kAvailSessRow  

w2kAvailSessClientName 1.3.6.1.4.1.791.2.10.2.43.3.8.3.1.1
&Client name of the session, which is the name of the host, from where this session was initiated.
OBJECT-TYPE    
  DisplayString  

w2kAvailSessUserName 1.3.6.1.4.1.791.2.10.2.43.3.8.3.1.2
&User name of the session, which specifies the user, who logged in and is in the form 'domainName\userName'.
OBJECT-TYPE    
  DisplayString  

w2kAvailSessTime 1.3.6.1.4.1.791.2.10.2.43.3.8.3.1.3
&The time when the agent discovered this session and put it into this table.
OBJECT-TYPE    
  DisplayString  

w2kAvailPrnGroup 1.3.6.1.4.1.791.2.10.2.43.3.9
OBJECT IDENTIFIER    

w2kAvailPrnRefresh 1.3.6.1.4.1.791.2.10.2.43.3.9.1
&Set this value to 'refresh' to let the agent check again for all configured printers. The user can not set the value to 'none'.
OBJECT-TYPE    
  INTEGER none(1), refresh(2)  

w2kAvailPrnCount 1.3.6.1.4.1.791.2.10.2.43.3.9.2
&The number of currently available printers. This includes all local printers, but not the network printers.
OBJECT-TYPE    
  INTEGER  

w2kAvailPrnTable 1.3.6.1.4.1.791.2.10.2.43.3.9.3
&A table containing the local printers available for monitoring.
OBJECT-TYPE    
  SEQUENCE OF  
    W2kAvailPrnRow

w2kAvailPrnEntry 1.3.6.1.4.1.791.2.10.2.43.3.9.3.1
&The table entry.
OBJECT-TYPE    
  W2kAvailPrnRow  

w2kAvailPrnName 1.3.6.1.4.1.791.2.10.2.43.3.9.3.1.1
&The name of the local printer.
OBJECT-TYPE    
  DisplayString  

w2kAvailPrnTime 1.3.6.1.4.1.791.2.10.2.43.3.9.3.1.2
&The time when the agent discovered this printer and put it into this table.
OBJECT-TYPE    
  DisplayString  

w2kHistoryGroup 1.3.6.1.4.1.791.2.10.2.43.4
OBJECT IDENTIFIER    

w2kHistoryCpuCollect 1.3.6.1.4.1.791.2.10.2.43.4.1
&Set this value to 'yes' to let the agent collect traps of the processor group in the history table. If set to 'no' these traps are not stored in the history table.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

w2kHistoryMemCollect 1.3.6.1.4.1.791.2.10.2.43.4.2
&Set this value to 'yes' to let the agent collect traps of the memory group in the history table. If set to 'no' these traps are not stored in the history table.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

w2kHistoryLVolCollect 1.3.6.1.4.1.791.2.10.2.43.4.3
&Set this value to 'yes' to let the agent collect traps of the logical volume group in the history table. If set to 'no' these traps are not stored in the history table.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

w2kHistoryMntCollect 1.3.6.1.4.1.791.2.10.2.43.4.4
&Set this value to 'yes' to let the agent collect traps of the mount group in the history table. If set to 'no' these traps are not stored in the history table.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

w2kHistoryDfsCollect 1.3.6.1.4.1.791.2.10.2.43.4.5
&Set this value to 'yes' to let the agent collect traps of the distributed file system group in the history table. If set to 'no' these traps are not stored in the history table.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

w2kHistoryQuotCollect 1.3.6.1.4.1.791.2.10.2.43.4.6
&Set this value to 'yes' to let the agent collect traps of the quota group in the history table. If set to 'no' these traps are not stored in the history table.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

w2kHistoryDirCollect 1.3.6.1.4.1.791.2.10.2.43.4.7
&Set this value to 'yes' to let the agent collect traps of the directory group in the history table. If set to 'no' these traps are not stored in the history table.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

w2kHistoryFileCollect 1.3.6.1.4.1.791.2.10.2.43.4.8
&Set this value to 'yes' to let the agent collect traps of the file group in the history table. If set to 'no' these traps are not stored in the history table.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

w2kHistoryProcCollect 1.3.6.1.4.1.791.2.10.2.43.4.9
&Set this value to 'yes' to let the agent collect traps of the processes group in the history table. If set to 'no' these traps are not stored in the history table.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

w2kHistorySrvcCollect 1.3.6.1.4.1.791.2.10.2.43.4.10
&Set this value to 'yes' to let the agent collect traps of the services group in the history table. If set to 'no' these traps are not stored in the history table.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

w2kHistoryJobCollect 1.3.6.1.4.1.791.2.10.2.43.4.11
&Set this value to 'yes' to let the agent collect traps of the jobs group in the history table. If set to 'no' these traps are not stored in the history table.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

w2kHistorySessCollect 1.3.6.1.4.1.791.2.10.2.43.4.12
&Set this value to 'yes' to let the agent collect traps of the sessions group in the history table. If set to 'no' these traps are not stored in the history table.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

w2kHistoryPrnCollect 1.3.6.1.4.1.791.2.10.2.43.4.13
&Set this value to 'yes' to let the agent collect traps of the printers group in the history table. If set to 'no' these traps are not stored in the history table.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

w2kHistoryNetCollect 1.3.6.1.4.1.791.2.10.2.43.4.14
&Set this value to 'yes' to let the agent collect traps of the network interfaces group in the history table. If set to 'no' these traps are not stored in the history table.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

w2kHistoryRegCollect 1.3.6.1.4.1.791.2.10.2.43.4.15
&Set this value to 'yes' to let the agent collect traps of the registry entries group in the history table. If set to 'no' these traps are not stored in the history table.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

w2kHistoryButton 1.3.6.1.4.1.791.2.10.2.43.4.16
&Set this value to 'clear' to let the agent empty the history table. The user can not set the value to 'none'.
OBJECT-TYPE    
  INTEGER none(1), clear(2)  

w2kHistoryMaxEntries 1.3.6.1.4.1.791.2.10.2.43.4.17
&The maximum number of entries to be stored in the history table. Valid values are 0 to 100. If set to 0 no history information of traps is stored.
OBJECT-TYPE    
  INTEGER  

w2kHistoryCount 1.3.6.1.4.1.791.2.10.2.43.4.18
&The number of entries in the history table.
OBJECT-TYPE    
  INTEGER  

w2kHistoryTable 1.3.6.1.4.1.791.2.10.2.43.4.19
&A table containing the last enterprise specific traps the agent arised.
OBJECT-TYPE    
  SEQUENCE OF  
    W2kHistoryRow

w2kHistoryEntry 1.3.6.1.4.1.791.2.10.2.43.4.19.1
&The table entry.
OBJECT-TYPE    
  W2kHistoryRow  

w2kHistoryTrapName 1.3.6.1.4.1.791.2.10.2.43.4.19.1.1
&The name of the trap as defined in the MIB.
OBJECT-TYPE    
  DisplayString  

w2kHistoryTrapNumber 1.3.6.1.4.1.791.2.10.2.43.4.19.1.2
&The enterprise specific trap type number.
OBJECT-TYPE    
  INTEGER  

w2kHistoryTrapTime 1.3.6.1.4.1.791.2.10.2.43.4.19.1.3
&The date and time the trap was sent.
OBJECT-TYPE    
  DisplayString  

w2kHistoryTrapVarBind 1.3.6.1.4.1.791.2.10.2.43.4.19.1.4
&A comma separated list of the varbinds the agent sent with the trap. Each element has the form 'attribute=value'.
OBJECT-TYPE    
  DisplayString  

w2kCpuTotalUnknown 1.3.6.1.4.1.791.2.10.2.43.10000
&The watcher monitoring the processor total changed its status to 'unknown'.
TRAP-TYPE    

w2kCpuTotalOk 1.3.6.1.4.1.791.2.10.2.43.10001
&The watcher monitoring the processor total changed its status to 'ok'.
TRAP-TYPE    

w2kCpuTotalWarning 1.3.6.1.4.1.791.2.10.2.43.10002
&The watcher monitoring the processor total changed its status to 'warning'.
TRAP-TYPE    

w2kCpuTotalCritical 1.3.6.1.4.1.791.2.10.2.43.10003
&The watcher monitoring the processor total changed its status to 'critical'.
TRAP-TYPE    

w2kCpuTotalModified 1.3.6.1.4.1.791.2.10.2.43.10009
&The watcher configuration for the processor total changed. The varbind list contains the changed attribute with its old value and with its new value.
TRAP-TYPE    

w2kCpuUnknown 1.3.6.1.4.1.791.2.10.2.43.10990
&A watcher monitoring a processor changed its status to 'unknown'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kCpuOk 1.3.6.1.4.1.791.2.10.2.43.10991
&A watcher monitoring a processor changed its status to 'ok'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kCpuWarning 1.3.6.1.4.1.791.2.10.2.43.10992
&A watcher monitoring a processor changed its status to 'warning'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kCpuCritical 1.3.6.1.4.1.791.2.10.2.43.10993
&A watcher monitoring a processor changed its status to 'critical'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kCpuAdded 1.3.6.1.4.1.791.2.10.2.43.10996
&A watcher monitoring a processor was added. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kCpuDeleted 1.3.6.1.4.1.791.2.10.2.43.10997
&A watcher monitoring a processor was removed. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kCpuInfo 1.3.6.1.4.1.791.2.10.2.43.10998
&A watcher monitoring a processor changed a substatus. The varbind list contains detailed information in one string.
TRAP-TYPE    

w2kCpuModified 1.3.6.1.4.1.791.2.10.2.43.10999
&The watcher configuration for a processor changed. The varbind list contains the name of the involved resource, the changed attribute with its old value and with its new value.
TRAP-TYPE    

w2kMemVirtUnknown 1.3.6.1.4.1.791.2.10.2.43.11010
&The watcher monitoring the virtual memory changed its status to 'unknown'.
TRAP-TYPE    

w2kMemVirtOk 1.3.6.1.4.1.791.2.10.2.43.11011
&The watcher monitoring the virtual memory changed its status to 'ok'.
TRAP-TYPE    

w2kMemVirtWarning 1.3.6.1.4.1.791.2.10.2.43.11012
&The watcher monitoring the virtual memory changed its status to 'warning'.
TRAP-TYPE    

w2kMemVirtCritical 1.3.6.1.4.1.791.2.10.2.43.11013
&The watcher monitoring the virtual memory changed its status to 'critical'.
TRAP-TYPE    

w2kMemVirtModified 1.3.6.1.4.1.791.2.10.2.43.11019
&The watcher configuration for the virtual memory changed. The varbind list contains the changed attribute with its old value and with its new value.
TRAP-TYPE    

w2kMemPhysUnknown 1.3.6.1.4.1.791.2.10.2.43.11020
&The watcher monitoring the physical memory changed its status to 'unknown'.
TRAP-TYPE    

w2kMemPhysOk 1.3.6.1.4.1.791.2.10.2.43.11021
&The watcher monitoring the physical memory changed its status to 'ok'.
TRAP-TYPE    

w2kMemPhysWarning 1.3.6.1.4.1.791.2.10.2.43.11022
&The watcher monitoring the physical memory changed its status to 'warning'.
TRAP-TYPE    

w2kMemPhysCritical 1.3.6.1.4.1.791.2.10.2.43.11023
&The watcher monitoring the physical memory changed its status to 'critical'.
TRAP-TYPE    

w2kMemPhysModified 1.3.6.1.4.1.791.2.10.2.43.11029
&The watcher configuration for the physical memory changed. The varbind list contains the changed attribute with its old value and with its new value.
TRAP-TYPE    

w2kMemPageUnknown 1.3.6.1.4.1.791.2.10.2.43.11030
&The watcher monitoring the paging memory changed its status to 'unknown'.
TRAP-TYPE    

w2kMemPageOk 1.3.6.1.4.1.791.2.10.2.43.11031
&The watcher monitoring the paging memory changed its status to 'ok'.
TRAP-TYPE    

w2kMemPageWarning 1.3.6.1.4.1.791.2.10.2.43.11032
&The watcher monitoring the paging memory changed its status to 'warning'.
TRAP-TYPE    

w2kMemPageCritical 1.3.6.1.4.1.791.2.10.2.43.11033
&The watcher monitoring the paging memory changed its status to 'critical'.
TRAP-TYPE    

w2kMemPageModified 1.3.6.1.4.1.791.2.10.2.43.11039
&The watcher configuration for the paging memory changed. The varbind list contains the changed attribute with its old value and with its new value.
TRAP-TYPE    

w2kLVolUnknown 1.3.6.1.4.1.791.2.10.2.43.12980
&A watcher monitoring a logical volume changed its status to 'unknown'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kLVolOk 1.3.6.1.4.1.791.2.10.2.43.12981
&A watcher monitoring a logical volume changed its status to 'ok'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kLVolWarning 1.3.6.1.4.1.791.2.10.2.43.12982
&A watcher monitoring a logical volume changed its status to 'warning'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kLVolCritical 1.3.6.1.4.1.791.2.10.2.43.12983
&A watcher monitoring a logical volume changed its status to 'critical'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kLVolAdded 1.3.6.1.4.1.791.2.10.2.43.12986
&A watcher monitoring a logical volume was added. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kLVolDeleted 1.3.6.1.4.1.791.2.10.2.43.12987
&A watcher monitoring a logical volume was removed. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kLVolInfo 1.3.6.1.4.1.791.2.10.2.43.12988
&A watcher monitoring a logical volume changed a substatus. The varbind list contains detailed information in one string.
TRAP-TYPE    

w2kLVolModified 1.3.6.1.4.1.791.2.10.2.43.12989
&The watcher configuration for a logical volume changed. The varbind list contains the name of the involved resource, the changed attribute with its old value and with its new value.
TRAP-TYPE    

w2kMntUnknown 1.3.6.1.4.1.791.2.10.2.43.13980
&A watcher monitoring a mount changed its status to 'unknown'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kMntOk 1.3.6.1.4.1.791.2.10.2.43.13981
&A watcher monitoring a mount changed its status to 'ok'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kMntWarning 1.3.6.1.4.1.791.2.10.2.43.13982
&A watcher monitoring a mount changed its status to 'warning'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kMntCritical 1.3.6.1.4.1.791.2.10.2.43.13983
&A watcher monitoring a mount changed its status to 'critical'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kMntAdded 1.3.6.1.4.1.791.2.10.2.43.13986
&A watcher monitoring a mount was added. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kMntDeleted 1.3.6.1.4.1.791.2.10.2.43.13987
&A watcher monitoring a mount was removed. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kMntInfo 1.3.6.1.4.1.791.2.10.2.43.13988
&A watcher monitoring a mount changed a substatus. The varbind list contains detailed information in one string.
TRAP-TYPE    

w2kMntModified 1.3.6.1.4.1.791.2.10.2.43.13989
&The watcher configuration for a mount changed. The varbind list contains the name of the involved resource, the changed attribute with its old value and with its new value.
TRAP-TYPE    

w2kDfsUnknown 1.3.6.1.4.1.791.2.10.2.43.14980
&A watcher monitoring a distributed file system link changed its status to 'unknown'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kDfsOk 1.3.6.1.4.1.791.2.10.2.43.14981
&A watcher monitoring a distributed file system link changed its status to 'ok'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kDfsWarning 1.3.6.1.4.1.791.2.10.2.43.14982
&A watcher monitoring a distributed file system link changed its status to 'warning'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kDfsCritical 1.3.6.1.4.1.791.2.10.2.43.14983
&A watcher monitoring a distributed file system link changed its status to 'critical'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kDfsAdded 1.3.6.1.4.1.791.2.10.2.43.14986
&A watcher monitoring a distributed file system link was added. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kDfsDeleted 1.3.6.1.4.1.791.2.10.2.43.14987
&A watcher monitoring a distributed file system link was removed. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kDfsInfo 1.3.6.1.4.1.791.2.10.2.43.14988
&A watcher monitoring a distributed file system link changed a substatus. The varbind list contains detailed information in one string.
TRAP-TYPE    

w2kDfsModified 1.3.6.1.4.1.791.2.10.2.43.14989
&The watcher configuration for a distributed file system link changed. The varbind list contains the name of the involved resource, the changed attribute with its old value and with its new value.
TRAP-TYPE    

w2kQuotUnknown 1.3.6.1.4.1.791.2.10.2.43.15980
&A watcher monitoring a quota changed its status to 'unknown'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kQuotOk 1.3.6.1.4.1.791.2.10.2.43.15981
&A watcher monitoring a quota changed its status to 'ok'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kQuotWarning 1.3.6.1.4.1.791.2.10.2.43.15982
&A watcher monitoring a quota changed its status to 'warning'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kQuotCritical 1.3.6.1.4.1.791.2.10.2.43.15983
&A watcher monitoring a quota changed its status to 'critical'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kQuotAdded 1.3.6.1.4.1.791.2.10.2.43.15986
&A watcher monitoring a quota was added. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kQuotDeleted 1.3.6.1.4.1.791.2.10.2.43.15987
&A watcher monitoring a quota was removed. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kQuotInfo 1.3.6.1.4.1.791.2.10.2.43.15988
&A watcher monitoring a quota changed a substatus. The varbind list contains detailed information in one string.
TRAP-TYPE    

w2kQuotModified 1.3.6.1.4.1.791.2.10.2.43.15989
&The watcher configuration for a quota changed. The varbind list contains the name of the involved resource, the changed attribute with its old value and with its new value.
TRAP-TYPE    

w2kDirUnknown 1.3.6.1.4.1.791.2.10.2.43.16980
&A watcher monitoring a directory changed its status to 'unknown'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kDirOk 1.3.6.1.4.1.791.2.10.2.43.16981
&A watcher monitoring a directory changed its status to 'ok'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kDirWarning 1.3.6.1.4.1.791.2.10.2.43.16982
&A watcher monitoring a directory changed its status to 'warning'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kDirCritical 1.3.6.1.4.1.791.2.10.2.43.16983
&A watcher monitoring a directory changed its status to 'critical'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kDirAdded 1.3.6.1.4.1.791.2.10.2.43.16986
&A watcher monitoring a directory was added. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kDirDeleted 1.3.6.1.4.1.791.2.10.2.43.16987
&A watcher monitoring a directory was removed. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kDirInfo 1.3.6.1.4.1.791.2.10.2.43.16988
&A watcher monitoring a directory changed a substatus. The varbind list contains detailed information in one string.
TRAP-TYPE    

w2kDirModified 1.3.6.1.4.1.791.2.10.2.43.16989
&The watcher configuration for a directory changed. The varbind list contains the name of the involved resource, the changed attribute with its old value and with its new value.
TRAP-TYPE    

w2kFileUnknown 1.3.6.1.4.1.791.2.10.2.43.17980
&A watcher monitoring a file changed its status to 'unknown'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kFileOk 1.3.6.1.4.1.791.2.10.2.43.17981
&A watcher monitoring a file changed its status to 'ok'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kFileWarning 1.3.6.1.4.1.791.2.10.2.43.17982
&A watcher monitoring a file changed its status to 'warning'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kFileCritical 1.3.6.1.4.1.791.2.10.2.43.17983
&A watcher monitoring a file changed its status to 'critical'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kFileAdded 1.3.6.1.4.1.791.2.10.2.43.17986
&A watcher monitoring a file was added. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kFileDeleted 1.3.6.1.4.1.791.2.10.2.43.17987
&A watcher monitoring a file was removed. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kFileInfo 1.3.6.1.4.1.791.2.10.2.43.17988
&A watcher monitoring a file changed a substatus. The varbind list contains detailed information in one string.
TRAP-TYPE    

w2kFileModified 1.3.6.1.4.1.791.2.10.2.43.17989
&The watcher configuration for a file changed. The varbind list contains the name of the involved resource, the changed attribute with its old value and with its new value.
TRAP-TYPE    

w2kProcUnknown 1.3.6.1.4.1.791.2.10.2.43.18980
&A watcher monitoring a process changed its status to 'unknown'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kProcOk 1.3.6.1.4.1.791.2.10.2.43.18981
&A watcher monitoring a process changed its status to 'ok'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kProcWarning 1.3.6.1.4.1.791.2.10.2.43.18982
&A watcher monitoring a process changed its status to 'warning'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kProcCritical 1.3.6.1.4.1.791.2.10.2.43.18983
&A watcher monitoring a process changed its status to 'critical'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kProcAdded 1.3.6.1.4.1.791.2.10.2.43.18986
&A watcher monitoring a process was added. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kProcDeleted 1.3.6.1.4.1.791.2.10.2.43.18987
&A watcher monitoring a process was removed. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kProcInfo 1.3.6.1.4.1.791.2.10.2.43.18988
&A watcher monitoring a process changed a substatus. The varbind list contains detailed information in one string.
TRAP-TYPE    

w2kProcModified 1.3.6.1.4.1.791.2.10.2.43.18989
&The watcher configuration for a process changed. The varbind list contains the name of the involved resource, the changed attribute with its old value and with its new value.
TRAP-TYPE    

w2kSrvcUnknown 1.3.6.1.4.1.791.2.10.2.43.19980
&A watcher monitoring a service changed its status to 'unknown'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kSrvcOk 1.3.6.1.4.1.791.2.10.2.43.19981
&A watcher monitoring a service changed its status to 'ok'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kSrvcWarning 1.3.6.1.4.1.791.2.10.2.43.19982
&A watcher monitoring a service changed its status to 'warning'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kSrvcCritical 1.3.6.1.4.1.791.2.10.2.43.19983
&A watcher monitoring a service changed its status to 'critical'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kSrvcAdded 1.3.6.1.4.1.791.2.10.2.43.19986
&A watcher monitoring a service was added. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kSrvcDeleted 1.3.6.1.4.1.791.2.10.2.43.19987
&A watcher monitoring a service was removed. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kSrvcInfo 1.3.6.1.4.1.791.2.10.2.43.19988
&A watcher monitoring a service changed a substatus. The varbind list contains detailed information in one string.
TRAP-TYPE    

w2kSrvcModified 1.3.6.1.4.1.791.2.10.2.43.19989
&The watcher configuration for a service changed. The varbind list contains the name of the involved resource, the changed attribute with its old value and with its new value.
TRAP-TYPE    

w2kJobUnknown 1.3.6.1.4.1.791.2.10.2.43.20980
&A watcher monitoring a job changed its status to 'unknown'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kJobOk 1.3.6.1.4.1.791.2.10.2.43.20981
&A watcher monitoring a job changed its status to 'ok'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kJobWarning 1.3.6.1.4.1.791.2.10.2.43.20982
&A watcher monitoring a job changed its status to 'warning'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kJobCritical 1.3.6.1.4.1.791.2.10.2.43.20983
&A watcher monitoring a job changed its status to 'critical'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kJobAdded 1.3.6.1.4.1.791.2.10.2.43.20986
&A watcher monitoring a job was added. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kJobDeleted 1.3.6.1.4.1.791.2.10.2.43.20987
&A watcher monitoring a job was removed. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kJobInfo 1.3.6.1.4.1.791.2.10.2.43.20988
&A watcher monitoring a job changed a substatus. The varbind list contains detailed information in one string.
TRAP-TYPE    

w2kJobModified 1.3.6.1.4.1.791.2.10.2.43.20989
&The watcher configuration for a job changed. The varbind list contains the name of the involved resource, the changed attribute with its old value and with its new value.
TRAP-TYPE    

w2kSessUnknown 1.3.6.1.4.1.791.2.10.2.43.21980
&A watcher monitoring a session changed its status to 'unknown'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kSessOk 1.3.6.1.4.1.791.2.10.2.43.21981
&A watcher monitoring a session changed its status to 'ok'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kSessWarning 1.3.6.1.4.1.791.2.10.2.43.21982
&A watcher monitoring a session changed its status to 'warning'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kSessCritical 1.3.6.1.4.1.791.2.10.2.43.21983
&A watcher monitoring a session changed its status to 'critical'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kSessAdded 1.3.6.1.4.1.791.2.10.2.43.21986
&A watcher monitoring a session was added. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kSessDeleted 1.3.6.1.4.1.791.2.10.2.43.21987
&A watcher monitoring a session was removed. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kSessInfo 1.3.6.1.4.1.791.2.10.2.43.21988
&A watcher monitoring a session changed a substatus. The varbind list contains detailed information in one string.
TRAP-TYPE    

w2kSessModified 1.3.6.1.4.1.791.2.10.2.43.21989
&The watcher configuration for a session changed. The varbind list contains the name of the involved resource, the changed attribute with its old value and with its new value.
TRAP-TYPE    

w2kPrnUnknown 1.3.6.1.4.1.791.2.10.2.43.22980
&A watcher monitoring a printer changed its status to 'unknown'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kPrnOk 1.3.6.1.4.1.791.2.10.2.43.22981
&A watcher monitoring a printer changed its status to 'ok'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kPrnWarning 1.3.6.1.4.1.791.2.10.2.43.22982
&A watcher monitoring a printer changed its status to 'warning'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kPrnCritical 1.3.6.1.4.1.791.2.10.2.43.22983
&A watcher monitoring a printer changed its status to 'critical'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kPrnAdded 1.3.6.1.4.1.791.2.10.2.43.22986
&A watcher monitoring a printer was added. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kPrnDeleted 1.3.6.1.4.1.791.2.10.2.43.22987
&A watcher monitoring a printer was removed. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kPrnInfo 1.3.6.1.4.1.791.2.10.2.43.22988
&A watcher monitoring a printer changed a substatus. The varbind list contains detailed information in one string.
TRAP-TYPE    

w2kPrnModified 1.3.6.1.4.1.791.2.10.2.43.22989
&The watcher configuration for a printer changed. The varbind list contains the name of the involved resource, the changed attribute with its old value and with its new value.
TRAP-TYPE    

w2kNetTotalUnknown 1.3.6.1.4.1.791.2.10.2.43.23000
&The watcher monitoring the network interfaces total changed its status to 'unknown'.
TRAP-TYPE    

w2kNetTotalOk 1.3.6.1.4.1.791.2.10.2.43.23001
&The watcher monitoring the network interfaces total changed its status to 'ok'.
TRAP-TYPE    

w2kNetTotalWarning 1.3.6.1.4.1.791.2.10.2.43.23002
&The watcher monitoring the network interfaces total changed its status to 'warning'.
TRAP-TYPE    

w2kNetTotalCritical 1.3.6.1.4.1.791.2.10.2.43.23003
&The watcher monitoring the network interfaces total changed its status to 'critical'.
TRAP-TYPE    

w2kNetTotalInfo 1.3.6.1.4.1.791.2.10.2.43.23008
&The watcher monitoring the network interfaces total changed a substatus. The varbind list contains detailed information in one string.
TRAP-TYPE    

w2kNetTotalModified 1.3.6.1.4.1.791.2.10.2.43.23009
&The watcher configuration for the network interfaces total changed. The varbind list contains the changed attribute with its old value and with its new value.
TRAP-TYPE    

w2kNetUnknown 1.3.6.1.4.1.791.2.10.2.43.23990
&A watcher monitoring a network interface changed its status to 'unknown'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kNetOk 1.3.6.1.4.1.791.2.10.2.43.23991
&A watcher monitoring a network interface changed its status to 'ok'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kNetWarning 1.3.6.1.4.1.791.2.10.2.43.23992
&A watcher monitoring a network interface changed its status to 'warning'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kNetCritical 1.3.6.1.4.1.791.2.10.2.43.23993
&A watcher monitoring a network interface changed its status to 'critical'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kNetAdded 1.3.6.1.4.1.791.2.10.2.43.23996
&A watcher monitoring a network interface was added. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kNetDeleted 1.3.6.1.4.1.791.2.10.2.43.23997
&A watcher monitoring a network interface was removed. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kNetInfo 1.3.6.1.4.1.791.2.10.2.43.23998
&A watcher monitoring a network interface changed a substatus. The varbind list contains detailed information in one string.
TRAP-TYPE    

w2kNetModified 1.3.6.1.4.1.791.2.10.2.43.23999
&The watcher configuration for a network interface changed. The varbind list contains the name of the involved resource, the changed attribute with its old value and with its new value.
TRAP-TYPE    

w2kRegUnknown 1.3.6.1.4.1.791.2.10.2.43.24980
&A watcher monitoring a registry entry changed its status to 'unknown'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kRegOk 1.3.6.1.4.1.791.2.10.2.43.24981
&A watcher monitoring a registry entry changed its status to 'ok'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kRegWarning 1.3.6.1.4.1.791.2.10.2.43.24982
&A watcher monitoring a registry entry changed its status to 'warning'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kRegCritical 1.3.6.1.4.1.791.2.10.2.43.24983
&A watcher monitoring a registry entry changed its status to 'critical'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kRegAdded 1.3.6.1.4.1.791.2.10.2.43.24986
&A watcher monitoring a registry entry was added. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kRegDeleted 1.3.6.1.4.1.791.2.10.2.43.24987
&A watcher monitoring a registry entry was removed. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kRegInfo 1.3.6.1.4.1.791.2.10.2.43.24988
&A watcher monitoring a registry entry changed a substatus. The varbind list contains detailed information in one string.
TRAP-TYPE    

w2kRegModified 1.3.6.1.4.1.791.2.10.2.43.24989
&The watcher configuration for a registry entry changed. The varbind list contains the name of the involved resource, the changed attribute with its old value and with its new value.
TRAP-TYPE    

Defined Objects

W2kConfigLVolAutoRow  
SEQUENCE    
  DisplayString as w2kConfigLVolAutoWatcherName  
  DisplayString as w2kConfigLVolAutoName  
  DisplayString as w2kConfigLVolAutoDescription  
  INTEGER as w2kConfigLVolAutoAggLag  
  DisplayString as w2kConfigLVolAutoSizeWarn  
  DisplayString as w2kConfigLVolAutoSizeCrit  
  INTEGER as w2kConfigLVolAutoSizeMonitor  
  DisplayString as w2kConfigLVolAutoSizeDWarn  
  DisplayString as w2kConfigLVolAutoSizeDCrit  
  INTEGER as w2kConfigLVolAutoSizeDMonitor  
  INTEGER as w2kConfigLVolAutoTPutWarn  
  INTEGER as w2kConfigLVolAutoTPutCrit  
  INTEGER as w2kConfigLVolAutoTPutMonitor  
  INTEGER as w2kConfigLVolAutoFragWarn  
  INTEGER as w2kConfigLVolAutoFragCrit  
  INTEGER as w2kConfigLVolAutoFragMonitor  
  INTEGER as w2kConfigLVolAutoLossAction  
  INTEGER as w2kConfigLVolAutoButton  

W2kConfigMntAutoRow  
SEQUENCE    
  DisplayString as w2kConfigMntAutoWatcherName  
  DisplayString as w2kConfigMntAutoName  
  DisplayString as w2kConfigMntAutoDescription  
  INTEGER as w2kConfigMntAutoAggLag  
  INTEGER as w2kConfigMntAutoRelToMonitor  
  INTEGER as w2kConfigMntAutoLossAction  
  INTEGER as w2kConfigMntAutoButton  

W2kConfigDfsAutoRow  
SEQUENCE    
  DisplayString as w2kConfigDfsAutoWatcherName  
  DisplayString as w2kConfigDfsAutoName  
  DisplayString as w2kConfigDfsAutoDescription  
  INTEGER as w2kConfigDfsAutoAggLag  
  INTEGER as w2kConfigDfsAutoReplicaWarn  
  INTEGER as w2kConfigDfsAutoReplicaCrit  
  INTEGER as w2kConfigDfsAutoReplicaMonitor  
  INTEGER as w2kConfigDfsAutoLossAction  
  INTEGER as w2kConfigDfsAutoButton  

W2kConfigSrvcAutoRow  
SEQUENCE    
  DisplayString as w2kConfigSrvcAutoWatcherName  
  DisplayString as w2kConfigSrvcAutoName  
  DisplayString as w2kConfigSrvcAutoDescription  
  INTEGER as w2kConfigSrvcAutoAggLag  
  INTEGER as w2kConfigSrvcAutoExist  
  INTEGER as w2kConfigSrvcAutoExistMonitor  
  INTEGER as w2kConfigSrvcAutoActive  
  INTEGER as w2kConfigSrvcAutoActiveMonitor  
  INTEGER as w2kConfigSrvcAutoButton  

W2kConfigPrnAutoRow  
SEQUENCE    
  DisplayString as w2kConfigPrnAutoWatcherName  
  DisplayString as w2kConfigPrnAutoName  
  DisplayString as w2kConfigPrnAutoDescription  
  INTEGER as w2kConfigPrnAutoAggLag  
  INTEGER as w2kConfigPrnAutoEventMonitor  
  INTEGER as w2kConfigPrnAutoQueueWarn  
  INTEGER as w2kConfigPrnAutoQueueCrit  
  INTEGER as w2kConfigPrnAutoQueueMonitor  
  INTEGER as w2kConfigPrnAutoLossAction  
  INTEGER as w2kConfigPrnAutoButton  

W2kStatusCpuRow  
SEQUENCE    
  DisplayString as w2kStatusCpuName  
  DisplayString as w2kStatusCpuType  
  INTEGER as w2kStatusCpuAggStatus  
  INTEGER as w2kStatusCpuLoadValue  
  INTEGER as w2kStatusCpuLoadLagValue  
  INTEGER as w2kStatusCpuLoadLag  
  INTEGER as w2kStatusCpuLoadWarn  
  INTEGER as w2kStatusCpuLoadCrit  
  INTEGER as w2kStatusCpuLoadMonitor  
  INTEGER as w2kStatusCpuLoadStatus  
  INTEGER as w2kStatusCpuLossAction  
  INTEGER as w2kStatusCpuLossStatus  
  DisplayString as w2kStatusCpuCallBackRef  

W2kStatusLVolRow  
SEQUENCE    
  DisplayString as w2kStatusLVolName  
  DisplayString as w2kStatusLVolDescription  
  DisplayString as w2kStatusLVolMounts  
  DisplayString as w2kStatusLVolInfo  
  DisplayString as w2kStatusLVolAutoWatcherName  
  INTEGER as w2kStatusLVolAggLagValue  
  INTEGER as w2kStatusLVolAggLag  
  INTEGER as w2kStatusLVolAggStatus  
  INTEGER as w2kStatusLVolSizeTotal  
  INTEGER as w2kStatusLVolSizeValue  
  INTEGER as w2kStatusLVolSizeWarnValue  
  INTEGER as w2kStatusLVolSizeCritValue  
  DisplayString as w2kStatusLVolSizeWarn  
  DisplayString as w2kStatusLVolSizeCrit  
  INTEGER as w2kStatusLVolSizeMonitor  
  INTEGER as w2kStatusLVolSizeStatus  
  INTEGER as w2kStatusLVolSizeDValue  
  DisplayString as w2kStatusLVolSizeDWarnValue  
  DisplayString as w2kStatusLVolSizeDCritValue  
  DisplayString as w2kStatusLVolSizeDWarn  
  DisplayString as w2kStatusLVolSizeDCrit  
  INTEGER as w2kStatusLVolSizeDMonitor  
  INTEGER as w2kStatusLVolSizeDStatus  
  INTEGER as w2kStatusLVolTPutValue  
  INTEGER as w2kStatusLVolTPutWarn  
  INTEGER as w2kStatusLVolTPutCrit  
  INTEGER as w2kStatusLVolTPutMonitor  
  INTEGER as w2kStatusLVolTPutStatus  
  INTEGER as w2kStatusLVolFragValue  
  INTEGER as w2kStatusLVolFragWarn  
  INTEGER as w2kStatusLVolFragCrit  
  INTEGER as w2kStatusLVolFragMonitor  
  INTEGER as w2kStatusLVolFragStatus  
  INTEGER as w2kStatusLVolLossAction  
  INTEGER as w2kStatusLVolLossStatus  
  DisplayString as w2kStatusLVolCallBackRef  
  INTEGER as w2kStatusLVolButton  

W2kStatusMntRow  
SEQUENCE    
  DisplayString as w2kStatusMntName  
  DisplayString as w2kStatusMntDescription  
  DisplayString as w2kStatusMntAutoWatcherName  
  INTEGER as w2kStatusMntAggLagValue  
  INTEGER as w2kStatusMntAggLag  
  INTEGER as w2kStatusMntAggStatus  
  DisplayString as w2kStatusMntRelToValue  
  DisplayString as w2kStatusMntRelToRef  
  INTEGER as w2kStatusMntRelToMonitor  
  INTEGER as w2kStatusMntRelToStatus  
  INTEGER as w2kStatusMntLossAction  
  INTEGER as w2kStatusMntLossStatus  
  DisplayString as w2kStatusMntCallBackRef  
  INTEGER as w2kStatusMntButton  

W2kStatusDfsRow  
SEQUENCE    
  DisplayString as w2kStatusDfsName  
  DisplayString as w2kStatusDfsDescription  
  DisplayString as w2kStatusDfsIds  
  DisplayString as w2kStatusDfsAutoWatcherName  
  INTEGER as w2kStatusDfsAggLagValue  
  INTEGER as w2kStatusDfsAggLag  
  INTEGER as w2kStatusDfsAggStatus  
  INTEGER as w2kStatusDfsReplicaTotal  
  INTEGER as w2kStatusDfsReplicaValue  
  INTEGER as w2kStatusDfsReplicaWarn  
  INTEGER as w2kStatusDfsReplicaCrit  
  INTEGER as w2kStatusDfsReplicaMonitor  
  INTEGER as w2kStatusDfsReplicaStatus  
  INTEGER as w2kStatusDfsLossAction  
  INTEGER as w2kStatusDfsLossStatus  
  DisplayString as w2kStatusDfsCallBackRef  
  INTEGER as w2kStatusDfsButton  

W2kStatusQuotRow  
SEQUENCE    
  DisplayString as w2kStatusQuotLVolName  
  DisplayString as w2kStatusQuotUserName  
  DisplayString as w2kStatusQuotDescription  
  INTEGER as w2kStatusQuotAggLagValue  
  INTEGER as w2kStatusQuotAggLag  
  INTEGER as w2kStatusQuotAggStatus  
  INTEGER as w2kStatusQuotExist  
  INTEGER as w2kStatusQuotExistMonitor  
  INTEGER as w2kStatusQuotExistStatus  
  INTEGER as w2kStatusQuotSizeValue  
  INTEGER as w2kStatusQuotSizeWarn  
  INTEGER as w2kStatusQuotSizeCrit  
  INTEGER as w2kStatusQuotSizeMonitor  
  INTEGER as w2kStatusQuotSizeStatus  
  DisplayString as w2kStatusQuotCallBackRef  
  INTEGER as w2kStatusQuotButton  

W2kStatusDirRow  
SEQUENCE    
  DisplayString as w2kStatusDirName  
  DisplayString as w2kStatusDirDescription  
  INTEGER as w2kStatusDirAggLagValue  
  INTEGER as w2kStatusDirAggLag  
  INTEGER as w2kStatusDirAggStatus  
  INTEGER as w2kStatusDirExist  
  INTEGER as w2kStatusDirExistMonitor  
  INTEGER as w2kStatusDirExistStatus  
  DisplayString as w2kStatusDirTimeValue  
  DisplayString as w2kStatusDirTimeRef  
  INTEGER as w2kStatusDirTimeMonitor  
  INTEGER as w2kStatusDirTimeStatus  
  INTEGER as w2kStatusDirSizeRef  
  INTEGER as w2kStatusDirSizeValue  
  INTEGER as w2kStatusDirSizeWarnValue  
  INTEGER as w2kStatusDirSizeCritValue  
  DisplayString as w2kStatusDirSizeWarn  
  DisplayString as w2kStatusDirSizeCrit  
  INTEGER as w2kStatusDirSizeMonitor  
  INTEGER as w2kStatusDirSizeStatus  
  INTEGER as w2kStatusDirSizeDValue  
  DisplayString as w2kStatusDirSizeDWarnValue  
  DisplayString as w2kStatusDirSizeDCritValue  
  DisplayString as w2kStatusDirSizeDWarn  
  DisplayString as w2kStatusDirSizeDCrit  
  INTEGER as w2kStatusDirSizeDMonitor  
  INTEGER as w2kStatusDirSizeDStatus  
  INTEGER as w2kStatusDirEntryValue  
  INTEGER as w2kStatusDirEntryWarn  
  INTEGER as w2kStatusDirEntryCrit  
  INTEGER as w2kStatusDirEntryMonitor  
  INTEGER as w2kStatusDirEntryStatus  
  DisplayString as w2kStatusDirCallBackRef  
  INTEGER as w2kStatusDirButton  

W2kStatusFileRow  
SEQUENCE    
  DisplayString as w2kStatusFileName  
  DisplayString as w2kStatusFileDescription  
  INTEGER as w2kStatusFileAggLagValue  
  INTEGER as w2kStatusFileAggLag  
  INTEGER as w2kStatusFileAggStatus  
  INTEGER as w2kStatusFileExist  
  INTEGER as w2kStatusFileExistMonitor  
  INTEGER as w2kStatusFileExistStatus  
  DisplayString as w2kStatusFileTimeValue  
  DisplayString as w2kStatusFileTimeRef  
  INTEGER as w2kStatusFileTimeMonitor  
  INTEGER as w2kStatusFileTimeStatus  
  INTEGER as w2kStatusFileSizeRef  
  INTEGER as w2kStatusFileSizeValue  
  INTEGER as w2kStatusFileSizeWarnValue  
  INTEGER as w2kStatusFileSizeCritValue  
  DisplayString as w2kStatusFileSizeWarn  
  DisplayString as w2kStatusFileSizeCrit  
  INTEGER as w2kStatusFileSizeMonitor  
  INTEGER as w2kStatusFileSizeStatus  
  INTEGER as w2kStatusFileSizeDValue  
  DisplayString as w2kStatusFileSizeDWarnValue  
  DisplayString as w2kStatusFileSizeDCritValue  
  DisplayString as w2kStatusFileSizeDWarn  
  DisplayString as w2kStatusFileSizeDCrit  
  INTEGER as w2kStatusFileSizeDMonitor  
  INTEGER as w2kStatusFileSizeDStatus  
  DisplayString as w2kStatusFileCallBackRef  
  INTEGER as w2kStatusFileButton  

W2kStatusProcRow  
SEQUENCE    
  DisplayString as w2kStatusProcProcName  
  DisplayString as w2kStatusProcPathName  
  DisplayString as w2kStatusProcUserName  
  DisplayString as w2kStatusProcDescription  
  DisplayString as w2kStatusProcIds  
  INTEGER as w2kStatusProcAggLagValue  
  INTEGER as w2kStatusProcAggLag  
  INTEGER as w2kStatusProcAggStatus  
  INTEGER as w2kStatusProcInstValue  
  INTEGER as w2kStatusProcInstMin  
  INTEGER as w2kStatusProcInstMax  
  INTEGER as w2kStatusProcInstMonitor  
  INTEGER as w2kStatusProcInstStatus  
  INTEGER as w2kStatusProcChildMinValue  
  INTEGER as w2kStatusProcChildMaxValue  
  INTEGER as w2kStatusProcChildMin  
  INTEGER as w2kStatusProcChildMax  
  INTEGER as w2kStatusProcChildMonitor  
  INTEGER as w2kStatusProcChildStatus  
  INTEGER as w2kStatusProcThreadMinValue  
  INTEGER as w2kStatusProcThreadMaxValue  
  INTEGER as w2kStatusProcThreadMin  
  INTEGER as w2kStatusProcThreadMax  
  INTEGER as w2kStatusProcThreadMonitor  
  INTEGER as w2kStatusProcThreadStatus  
  INTEGER as w2kStatusProcMemoryValue  
  INTEGER as w2kStatusProcMemoryWarn  
  INTEGER as w2kStatusProcMemoryCrit  
  INTEGER as w2kStatusProcMemoryMonitor  
  INTEGER as w2kStatusProcMemoryStatus  
  INTEGER as w2kStatusProcCpuValue  
  INTEGER as w2kStatusProcCpuWarn  
  INTEGER as w2kStatusProcCpuCrit  
  INTEGER as w2kStatusProcCpuMonitor  
  INTEGER as w2kStatusProcCpuStatus  
  DisplayString as w2kStatusProcCallBackRef  
  INTEGER as w2kStatusProcButton  

W2kStatusSrvcRow  
SEQUENCE    
  DisplayString as w2kStatusSrvcName  
  DisplayString as w2kStatusSrvcDescription  
  DisplayString as w2kStatusSrvcDescr  
  DisplayString as w2kStatusSrvcAutoWatcherName  
  INTEGER as w2kStatusSrvcAggLagValue  
  INTEGER as w2kStatusSrvcAggLag  
  INTEGER as w2kStatusSrvcAggStatus  
  INTEGER as w2kStatusSrvcExist  
  INTEGER as w2kStatusSrvcExistMonitor  
  INTEGER as w2kStatusSrvcExistStatus  
  INTEGER as w2kStatusSrvcActiveValue  
  INTEGER as w2kStatusSrvcActive  
  INTEGER as w2kStatusSrvcActiveMonitor  
  INTEGER as w2kStatusSrvcActiveStatus  
  DisplayString as w2kStatusSrvcCallBackRef  
  INTEGER as w2kStatusSrvcButton  

W2kStatusJobRow  
SEQUENCE    
  DisplayString as w2kStatusJobName  
  DisplayString as w2kStatusJobDescription  
  INTEGER as w2kStatusJobAggLagValue  
  INTEGER as w2kStatusJobAggLag  
  INTEGER as w2kStatusJobAggStatus  
  INTEGER as w2kStatusJobExist  
  INTEGER as w2kStatusJobExistMonitor  
  INTEGER as w2kStatusJobExistStatus  
  INTEGER as w2kStatusJobProcessValue  
  INTEGER as w2kStatusJobProcessMin  
  INTEGER as w2kStatusJobProcessMax  
  INTEGER as w2kStatusJobProcessMonitor  
  INTEGER as w2kStatusJobProcessStatus  
  INTEGER as w2kStatusJobCpuValue  
  INTEGER as w2kStatusJobCpuWarn  
  INTEGER as w2kStatusJobCpuCrit  
  INTEGER as w2kStatusJobCpuMonitor  
  INTEGER as w2kStatusJobCpuStatus  
  DisplayString as w2kStatusJobCallBackRef  
  INTEGER as w2kStatusJobButton  

W2kStatusSessRow  
SEQUENCE    
  DisplayString as w2kStatusSessClientName  
  DisplayString as w2kStatusSessUserName  
  DisplayString as w2kStatusSessDescription  
  DisplayString as w2kStatusSessIds  
  INTEGER as w2kStatusSessAggLagValue  
  INTEGER as w2kStatusSessAggLag  
  INTEGER as w2kStatusSessAggStatus  
  INTEGER as w2kStatusSessInstValue  
  INTEGER as w2kStatusSessInstMin  
  INTEGER as w2kStatusSessInstMax  
  INTEGER as w2kStatusSessInstMonitor  
  INTEGER as w2kStatusSessInstStatus  
  INTEGER as w2kStatusSessMemoryValue  
  INTEGER as w2kStatusSessMemoryWarn  
  INTEGER as w2kStatusSessMemoryCrit  
  INTEGER as w2kStatusSessMemoryMonitor  
  INTEGER as w2kStatusSessMemoryStatus  
  INTEGER as w2kStatusSessCpuValue  
  INTEGER as w2kStatusSessCpuWarn  
  INTEGER as w2kStatusSessCpuCrit  
  INTEGER as w2kStatusSessCpuMonitor  
  INTEGER as w2kStatusSessCpuStatus  
  DisplayString as w2kStatusSessCallBackRef  
  INTEGER as w2kStatusSessButton  

W2kStatusPrnRow  
SEQUENCE    
  DisplayString as w2kStatusPrnName  
  DisplayString as w2kStatusPrnDescription  
  DisplayString as w2kStatusPrnAutoWatcherName  
  INTEGER as w2kStatusPrnAggLagValue  
  INTEGER as w2kStatusPrnAggLag  
  INTEGER as w2kStatusPrnAggStatus  
  INTEGER as w2kStatusPrnEventDescr  
  INTEGER as w2kStatusPrnEventMonitor  
  INTEGER as w2kStatusPrnEventStatus  
  INTEGER as w2kStatusPrnQueueValue  
  INTEGER as w2kStatusPrnQueueWarn  
  INTEGER as w2kStatusPrnQueueCrit  
  INTEGER as w2kStatusPrnQueueMonitor  
  INTEGER as w2kStatusPrnQueueStatus  
  INTEGER as w2kStatusPrnLossAction  
  INTEGER as w2kStatusPrnLossStatus  
  DisplayString as w2kStatusPrnCallBackRef  
  INTEGER as w2kStatusPrnButton  

W2kStatusNetRow  
SEQUENCE    
  DisplayString as w2kStatusNetName  
  INTEGER as w2kStatusNetAggLagValue  
  INTEGER as w2kStatusNetAggLag  
  INTEGER as w2kStatusNetAggStatus  
  INTEGER as w2kStatusNetInPktValue  
  INTEGER as w2kStatusNetInPktWarn  
  INTEGER as w2kStatusNetInPktCrit  
  INTEGER as w2kStatusNetInPktMonitor  
  INTEGER as w2kStatusNetInPktStatus  
  INTEGER as w2kStatusNetOutPktValue  
  INTEGER as w2kStatusNetOutPktWarn  
  INTEGER as w2kStatusNetOutPktCrit  
  INTEGER as w2kStatusNetOutPktMonitor  
  INTEGER as w2kStatusNetOutPktStatus  
  INTEGER as w2kStatusNetInErrDValue  
  INTEGER as w2kStatusNetInErrDWarn  
  INTEGER as w2kStatusNetInErrDCrit  
  INTEGER as w2kStatusNetInErrDMonitor  
  INTEGER as w2kStatusNetInErrDStatus  
  INTEGER as w2kStatusNetOutErrDValue  
  INTEGER as w2kStatusNetOutErrDWarn  
  INTEGER as w2kStatusNetOutErrDCrit  
  INTEGER as w2kStatusNetOutErrDMonitor  
  INTEGER as w2kStatusNetOutErrDStatus  
  INTEGER as w2kStatusNetLossAction  
  INTEGER as w2kStatusNetLossStatus  
  DisplayString as w2kStatusNetCallBackRef  

W2kStatusRegRow  
SEQUENCE    
  DisplayString as w2kStatusRegName  
  DisplayString as w2kStatusRegDescription  
  INTEGER as w2kStatusRegAggLagValue  
  INTEGER as w2kStatusRegAggLag  
  INTEGER as w2kStatusRegAggStatus  
  INTEGER as w2kStatusRegExist  
  INTEGER as w2kStatusRegExistMonitor  
  INTEGER as w2kStatusRegExistStatus  
  DisplayString as w2kStatusRegValueValue  
  INTEGER as w2kStatusRegValueType  
  DisplayString as w2kStatusRegValueRef  
  INTEGER as w2kStatusRegValueCond  
  INTEGER as w2kStatusRegValueMonitor  
  INTEGER as w2kStatusRegValueStatus  
  DisplayString as w2kStatusRegCallBackRef  
  INTEGER as w2kStatusRegButton  

W2kAvailLVolRow  
SEQUENCE    
  DisplayString as w2kAvailLVolName  
  DisplayString as w2kAvailLVolMounts  
  DisplayString as w2kAvailLVolInfo  
  DisplayString as w2kAvailLVolTime  

W2kAvailMntRow  
SEQUENCE    
  DisplayString as w2kAvailMntName  
  DisplayString as w2kAvailMntRelTo  
  DisplayString as w2kAvailMntTime  

W2kAvailDfsRow  
SEQUENCE    
  DisplayString as w2kAvailDfsName  
  DisplayString as w2kAvailDfsTime  

W2kAvailQuotRow  
SEQUENCE    
  DisplayString as w2kAvailQuotLVolName  
  DisplayString as w2kAvailQuotUserName  
  INTEGER as w2kAvailQuotWarnLevel  
  INTEGER as w2kAvailQuotLimit  
  DisplayString as w2kAvailQuotTime  

W2kAvailProcRow  
SEQUENCE    
  DisplayString as w2kAvailProcProcName  
  DisplayString as w2kAvailProcPathName  
  DisplayString as w2kAvailProcUserName  
  DisplayString as w2kAvailProcTime  

W2kAvailSrvcRow  
SEQUENCE    
  DisplayString as w2kAvailSrvcName  
  DisplayString as w2kAvailSrvcDescr  
  DisplayString as w2kAvailSrvcTime  

W2kAvailJobRow  
SEQUENCE    
  DisplayString as w2kAvailJobName  
  DisplayString as w2kAvailJobTime  

W2kAvailSessRow  
SEQUENCE    
  DisplayString as w2kAvailSessClientName  
  DisplayString as w2kAvailSessUserName  
  DisplayString as w2kAvailSessTime  

W2kAvailPrnRow  
SEQUENCE    
  DisplayString as w2kAvailPrnName  
  DisplayString as w2kAvailPrnTime  

W2kHistoryRow  
SEQUENCE    
  DisplayString as w2kHistoryTrapName  
  INTEGER as w2kHistoryTrapNumber  
  DisplayString as w2kHistoryTrapTime  
  DisplayString as w2kHistoryTrapVarBind