CABLE-DIAG-MIB

File: CABLE-DIAG-MIB.mib (7965 bytes)

Imported modules

SNMPv2-TC SNMPv2-SMI DLINK-ID-REC-MIB

Imported symbols

TEXTUAL-CONVENTION MODULE-IDENTITY OBJECT-TYPE
Unsigned32 Integer32 RowStatus
TruthValue dlink-common-mgmt

Defined Objects

swCableDiagMIB 1.3.6.1.4.1.171.12.58
The MIB module for determining the status of the cables attached to the device
MODULE-IDENTITY    

swCableDiagCtrl 1.3.6.1.4.1.171.12.58.1
OBJECT IDENTIFIER    

swEtherCableDiagTable 1.3.6.1.4.1.171.12.58.1.1
A table that contains the cable situation for each port.
OBJECT-TYPE    
  SEQUENCE OF  
    SwEtherCableDiagEntry

swEtherCableDiagEntry 1.3.6.1.4.1.171.12.58.1.1.1
A list of cable situations for each port on the device.
OBJECT-TYPE    
  SwEtherCableDiagEntry  

swEtherCableDiagPortIndex 1.3.6.1.4.1.171.12.58.1.1.1.1
This object indicates the module's port number.(1..Max port number in the module)
OBJECT-TYPE    
  INTEGER 0..65535  

swEtherCableDiagPortType 1.3.6.1.4.1.171.12.58.1.1.1.2
Indicates the supported port data rate classification.
OBJECT-TYPE    
  INTEGER fastEthernet(0), gigaEthernet(1), other(2)  

swEtherCableDiagLinkStatus 1.3.6.1.4.1.171.12.58.1.1.1.3
This object indicates the link status.
OBJECT-TYPE    
  INTEGER link-down(0), link-up(1), other(2)  

swEtherCableDiagPair1Status 1.3.6.1.4.1.171.12.58.1.1.1.4
This object indicates the status of pair 1 of the cable.
OBJECT-TYPE    
  INTEGER ok(0), open(1), short(2), open-short(3), crosstalk(4), unknown(5), count(6), no-cable(7), other(8)  

swEtherCableDiagPair2Status 1.3.6.1.4.1.171.12.58.1.1.1.5
This object indicates the status of pair 2 of the cable.
OBJECT-TYPE    
  INTEGER ok(0), open(1), short(2), open-short(3), crosstalk(4), unknown(5), count(6), no-cable(7), other(8)  

swEtherCableDiagPair3Status 1.3.6.1.4.1.171.12.58.1.1.1.6
This object indicates the status of pair 3 of the cable.
OBJECT-TYPE    
  INTEGER ok(0), open(1), short(2), open-short(3), crosstalk(4), unknown(5), count(6), no-cable(7), other(8)  

swEtherCableDiagPair4Status 1.3.6.1.4.1.171.12.58.1.1.1.7
This object indicates the status of pair 4 of the cable.
OBJECT-TYPE    
  INTEGER ok(0), open(1), short(2), open-short(3), crosstalk(4), unknown(5), count(6), no-cable(7), other(8)  

swEtherCableDiagPair1Length 1.3.6.1.4.1.171.12.58.1.1.1.8
This object indicates the approx. length or length to the failure of pair 1 of the cable. This value is in meter units.
OBJECT-TYPE    
  INTEGER  

swEtherCableDiagPair2Length 1.3.6.1.4.1.171.12.58.1.1.1.9
This object indicates the approx. length or length to the failure of pair 2 of the cable. This value is in meter units.
OBJECT-TYPE    
  INTEGER  

swEtherCableDiagPair3Length 1.3.6.1.4.1.171.12.58.1.1.1.10
This object indicates the approx. length or length to the failure of pair 3 of the cable. This value is in meter units.
OBJECT-TYPE    
  INTEGER  

swEtherCableDiagPair4Length 1.3.6.1.4.1.171.12.58.1.1.1.11
This object indicates the approx. length or length to the failure of pair 4 of the cable. This value is in meter units.
OBJECT-TYPE    
  INTEGER  

swEtherCableDiagAction 1.3.6.1.4.1.171.12.58.1.1.1.12
Function to run the cable diagnostic on selected port.
OBJECT-TYPE    
  INTEGER action(1), processing(2), other(3)  

Defined Objects

SwEtherCableDiagEntry  
SEQUENCE    
  INTEGER as swEtherCableDiagPortIndex  
  INTEGER as swEtherCableDiagPortType  
  INTEGER as swEtherCableDiagLinkStatus  
  INTEGER as swEtherCableDiagPair1Status  
  INTEGER as swEtherCableDiagPair2Status  
  INTEGER as swEtherCableDiagPair3Status  
  INTEGER as swEtherCableDiagPair4Status  
  INTEGER as swEtherCableDiagPair1Length  
  INTEGER as swEtherCableDiagPair2Length  
  INTEGER as swEtherCableDiagPair3Length  
  INTEGER as swEtherCableDiagPair4Length  
  INTEGER as swEtherCableDiagAction