CAIUXOS

File: CAIUXOS.mib (181117 bytes)

Imported modules

RFC-1215 RFC1155-SMI RFC1213-MIB

Imported symbols

TRAP-TYPE OBJECT-TYPE Counter
Gauge enterprises DisplayString

Defined Objects

cai 1.3.6.1.4.1.791
OBJECT IDENTIFIER    

caiSysMgr 1.3.6.1.4.1.791.2
OBJECT IDENTIFIER    

agentWorks 1.3.6.1.4.1.791.2.9
OBJECT IDENTIFIER    

unix 1.3.6.1.4.1.791.2.9.4
OBJECT IDENTIFIER    

caiUxOs 1.3.6.1.4.1.791.2.9.4.5
OBJECT IDENTIFIER    

uxsConfigGroup 1.3.6.1.4.1.791.2.9.4.5.1
OBJECT IDENTIFIER    

uxsConfigGeneralGroup 1.3.6.1.4.1.791.2.9.4.5.1.1
OBJECT IDENTIFIER    

uxsConfigGeneralAgentVersion 1.3.6.1.4.1.791.2.9.4.5.1.1.1
&The version of the agent that is running.
OBJECT-TYPE    
  DisplayString  

uxsConfigGeneralColdStartTime 1.3.6.1.4.1.791.2.9.4.5.1.1.2
&The date/time the agent was started.
OBJECT-TYPE    
  DisplayString  

uxsConfigGeneralWarmStartTime 1.3.6.1.4.1.791.2.9.4.5.1.1.3
&The date/time that the agent was last reconfigured through the SNMP interface.
OBJECT-TYPE    
  DisplayString  

uxsConfigGeneralCPUPollTime 1.3.6.1.4.1.791.2.9.4.5.1.1.4
&The last date/time that the CPU information was polled.
OBJECT-TYPE    
  DisplayString  

uxsConfigGeneralLoadPollTime 1.3.6.1.4.1.791.2.9.4.5.1.1.5
&The last date/time that the load average information was polled.
OBJECT-TYPE    
  DisplayString  

uxsConfigGeneralMemPollTime 1.3.6.1.4.1.791.2.9.4.5.1.1.6
&The last date/time that the real memory information was polled.
OBJECT-TYPE    
  DisplayString  

uxsConfigGeneralSwapPollTime 1.3.6.1.4.1.791.2.9.4.5.1.1.7
&The last date/time that the swap information was polled.
OBJECT-TYPE    
  DisplayString  

uxsConfigGeneralFSysPollTime 1.3.6.1.4.1.791.2.9.4.5.1.1.8
&The last date/time that the file system information was polled.
OBJECT-TYPE    
  DisplayString  

uxsConfigGeneralDiskPollTime 1.3.6.1.4.1.791.2.9.4.5.1.1.9
&The last date/time that the physical disk information was polled.
OBJECT-TYPE    
  DisplayString  

uxsConfigGeneralFilePollTime 1.3.6.1.4.1.791.2.9.4.5.1.1.10
&The last date/time that the file information was polled.
OBJECT-TYPE    
  DisplayString  

uxsConfigGeneralProcPollTime 1.3.6.1.4.1.791.2.9.4.5.1.1.11
&The last date/time that the process information was polled.
OBJECT-TYPE    
  DisplayString  

uxsConfigGeneralPrnPollTime 1.3.6.1.4.1.791.2.9.4.5.1.1.12
&The last date/time that the printer queue information was polled.
OBJECT-TYPE    
  DisplayString  

uxsConfigGeneralNetPollTime 1.3.6.1.4.1.791.2.9.4.5.1.1.13
&The last date/time that the Network Interface was polled.
OBJECT-TYPE    
  DisplayString  

uxsConfigGeneralIPCPollTime 1.3.6.1.4.1.791.2.9.4.5.1.1.14
&The last date/time that the Inter Process Communication information was polled.
OBJECT-TYPE    
  DisplayString  

uxsConfigSysGroup 1.3.6.1.4.1.791.2.9.4.5.1.2
OBJECT IDENTIFIER    

uxsConfigSysNodeName 1.3.6.1.4.1.791.2.9.4.5.1.2.1
&The name of the UNIX node.
OBJECT-TYPE    
  DisplayString  

uxsConfigSysSystemName 1.3.6.1.4.1.791.2.9.4.5.1.2.2
&The name of the operating system installed on the machine.
OBJECT-TYPE    
  DisplayString  

uxsConfigSysRelease 1.3.6.1.4.1.791.2.9.4.5.1.2.3
&The release of the operating system installed on the machine.
OBJECT-TYPE    
  DisplayString  

uxsConfigSysVersion 1.3.6.1.4.1.791.2.9.4.5.1.2.4
&The version of the operating system installed on the machine.
OBJECT-TYPE    
  DisplayString  

uxsConfigSysHardware 1.3.6.1.4.1.791.2.9.4.5.1.2.5
&The name of the hardware type of the machine.
OBJECT-TYPE    
  DisplayString  

uxsConfigSysBootTime 1.3.6.1.4.1.791.2.9.4.5.1.2.6
&The date/time the machine was booted.
OBJECT-TYPE    
  DisplayString  

uxsConfigSysRunLevel 1.3.6.1.4.1.791.2.9.4.5.1.2.7
&The run level of the machine at the time the agent started.
OBJECT-TYPE    
  DisplayString  

uxsConfigCPUGroup 1.3.6.1.4.1.791.2.9.4.5.1.3
OBJECT IDENTIFIER    

uxsConfigCPUPollInterval 1.3.6.1.4.1.791.2.9.4.5.1.3.1
&The time, in seconds, between the collections of the CPU information. Valid ranges: -1 (Suspended), 30 seconds or greater.
OBJECT-TYPE    
  INTEGER  

uxsConfigCPUPollMethod 1.3.6.1.4.1.791.2.9.4.5.1.3.2
&Defines if the CPU information is collected. Valid values: disable(1) or use-polling-period(2).
OBJECT-TYPE    
  INTEGER disable(1), use-polling-period(2)  

uxsConfigCPULag 1.3.6.1.4.1.791.2.9.4.5.1.3.3
&The number of times that the threshold has to be reached before the state changes. Valid range: Greater than 0.
OBJECT-TYPE    
  INTEGER  

uxsConfigCPUWarn 1.3.6.1.4.1.791.2.9.4.5.1.3.4
&The value for CPU usage, as a percentage, that is considered a warning level for that resource. Valid ranges: Greater than 0, less than 99, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  DisplayString  

uxsConfigCPUCrit 1.3.6.1.4.1.791.2.9.4.5.1.3.5
&The value for CPU usage, as a percentage, that is considered a critical level for that resource. Valid ranges: Greater than 1, less than 100, not less than or equal to the warning threshold.
OBJECT-TYPE    
  DisplayString  

uxsConfigCPUMonitor 1.3.6.1.4.1.791.2.9.4.5.1.3.6
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsConfigCPULossAction 1.3.6.1.4.1.791.2.9.4.5.1.3.7
&Defines the action to take if the CPU is removed from the machine. Valid values: remove(1), up(2) or down(3).
OBJECT-TYPE    
  INTEGER remove(1), up(2), down(3)  

uxsConfigLoadGroup 1.3.6.1.4.1.791.2.9.4.5.1.4
OBJECT IDENTIFIER    

uxsConfigLoadPollInterval 1.3.6.1.4.1.791.2.9.4.5.1.4.1
&The time, in seconds, between the collections of the load average information. Valid ranges: -1 (Suspended), 30 seconds or greater.
OBJECT-TYPE    
  INTEGER  

uxsConfigLoadPollMethod 1.3.6.1.4.1.791.2.9.4.5.1.4.2
&Defines whether the load average information is collected. Valid values: disable(1) or use-polling-period(2).
OBJECT-TYPE    
  INTEGER disable(1), use-polling-period(2)  

uxsConfigMemGroup 1.3.6.1.4.1.791.2.9.4.5.1.5
OBJECT IDENTIFIER    

uxsConfigMemPollInterval 1.3.6.1.4.1.791.2.9.4.5.1.5.1
&The time, in seconds, between the collections of the real memory information. Valid ranges: -1 (Suspended), 30 seconds or greater.
OBJECT-TYPE    
  INTEGER  

uxsConfigMemPollMethod 1.3.6.1.4.1.791.2.9.4.5.1.5.2
&Defines whether the real memory information is collected. Valid values: disable(1) or use-polling-period(2).
OBJECT-TYPE    
  INTEGER disable(1), use-polling-period(2)  

uxsConfigSwapGroup 1.3.6.1.4.1.791.2.9.4.5.1.6
OBJECT IDENTIFIER    

uxsConfigSwapPollInterval 1.3.6.1.4.1.791.2.9.4.5.1.6.1
&The time, in seconds, between the collections of the swap usage information. Valid ranges: -1 (Suspended), 30 seconds or greater.
OBJECT-TYPE    
  INTEGER  

uxsConfigSwapPollMethod 1.3.6.1.4.1.791.2.9.4.5.1.6.2
&Defines whether the swap usage information is collected. Valid values: disable(1) or use-polling-period(2).
OBJECT-TYPE    
  INTEGER disable(1), use-polling-period(2)  

uxsConfigSwapLag 1.3.6.1.4.1.791.2.9.4.5.1.6.3
&The number of times that the threshold has to be reached before the state changes. Valid range: Greater than 0.
OBJECT-TYPE    
  INTEGER  

uxsConfigSwapWarn 1.3.6.1.4.1.791.2.9.4.5.1.6.4
&The value for used swap space, either as a percentage or in kilobytes, that is considered a warning level for that resource. Valid ranges: Greater than 0, less than total swap - 1, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  DisplayString  

uxsConfigSwapCrit 1.3.6.1.4.1.791.2.9.4.5.1.6.5
&The value for used swap space, either as a percentage or in kilobytes, that is considered a critical level for that resource. Valid ranges: Greater than 1, less than total swap, not less than or equal to the warning threshold.
OBJECT-TYPE    
  DisplayString  

uxsConfigSwapMonitor 1.3.6.1.4.1.791.2.9.4.5.1.6.6
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsConfigSwapLossAction 1.3.6.1.4.1.791.2.9.4.5.1.6.7
&Defines the action to take if the swap partition is removed from the machine. Valid values: remove(1), up(2) or down(3).
OBJECT-TYPE    
  INTEGER remove(1), up(2), down(3)  

uxsConfigFSysGroup 1.3.6.1.4.1.791.2.9.4.5.1.7
OBJECT IDENTIFIER    

uxsConfigFSysPollInterval 1.3.6.1.4.1.791.2.9.4.5.1.7.1
&The time, in seconds, between the collections of the file system information. Valid ranges: -1 (Suspended), 30 seconds or greater.
OBJECT-TYPE    
  INTEGER  

uxsConfigFSysPollMethod 1.3.6.1.4.1.791.2.9.4.5.1.7.2
&Defines whether the file system information is collected. Valid values: disable(1) or use-polling-period(2).
OBJECT-TYPE    
  INTEGER disable(1), use-polling-period(2)  

uxsConfigFSysSpaceWarn 1.3.6.1.4.1.791.2.9.4.5.1.7.3
&The value for file system space, either as a percentage or in kilobytes, that is considered a warning level for that resource. Valid ranges: Greater than 0, less than file system size - 1, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  DisplayString  

uxsConfigFSysSpaceCrit 1.3.6.1.4.1.791.2.9.4.5.1.7.4
&The value for file system space, either as a percentage or in kilobytes, that is considered a critical level for that resource. Valid ranges: Greater than 1, less than file system size, not less than or equal to the warning threshold.
OBJECT-TYPE    
  DisplayString  

uxsConfigFSysSpaceMonitor 1.3.6.1.4.1.791.2.9.4.5.1.7.5
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsConfigFSysSpaceDWarn 1.3.6.1.4.1.791.2.9.4.5.1.7.6
&The value for file system delta space, either as a percentage or in kilobytes, that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  DisplayString  

uxsConfigFSysSpaceDCrit 1.3.6.1.4.1.791.2.9.4.5.1.7.7
&The value for file system delta space, either as a percentage or in kilobytes, that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
OBJECT-TYPE    
  DisplayString  

uxsConfigFSysSpaceDMonitor 1.3.6.1.4.1.791.2.9.4.5.1.7.8
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsConfigFSysInodesWarn 1.3.6.1.4.1.791.2.9.4.5.1.7.9
&The value for inodes, either as a percentage or absolute value, that is considered a warning level for that resource. Valid ranges: Greater than 0, less than total inodes - 1, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  DisplayString  

uxsConfigFSysInodesCrit 1.3.6.1.4.1.791.2.9.4.5.1.7.10
&The value for inodes, either as percentage or absolute value, that is considered a critical level for that resource. Valid ranges: Greater than 1, less than total inodes, not less than or equal to the warning threshold.
OBJECT-TYPE    
  DisplayString  

uxsConfigFSysInodesMonitor 1.3.6.1.4.1.791.2.9.4.5.1.7.11
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsConfigFSysInodesDWarn 1.3.6.1.4.1.791.2.9.4.5.1.7.12
&The value for inodes delta, either as a percentage or absolute value, that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  DisplayString  

uxsConfigFSysInodesDCrit 1.3.6.1.4.1.791.2.9.4.5.1.7.13
&The value for inodes delta, either as a percentage or absolute value, that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
OBJECT-TYPE    
  DisplayString  

uxsConfigFSysInodesDMonitor 1.3.6.1.4.1.791.2.9.4.5.1.7.14
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsConfigFSysMountedMonitor 1.3.6.1.4.1.791.2.9.4.5.1.7.15
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1) or monitor(2).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), monitor(2)  

uxsConfigFSysLossAction 1.3.6.1.4.1.791.2.9.4.5.1.7.16
&Defines the action to take if the file system is removed from the file system table. Valid values: remove(1), up(2) or down(3).
OBJECT-TYPE    
  INTEGER remove(1), up(2), down(3)  

uxsConfigFSysNameAdd 1.3.6.1.4.1.791.2.9.4.5.1.7.17
&Defines the name of the file system watcher to add.
OBJECT-TYPE    
  DisplayString  

uxsConfigFSysNameRemove 1.3.6.1.4.1.791.2.9.4.5.1.7.18
&Defines the name of the file system watcher to remove.
OBJECT-TYPE    
  DisplayString  

uxsConfigDiskGroup 1.3.6.1.4.1.791.2.9.4.5.1.8
OBJECT IDENTIFIER    

uxsConfigDiskPollInterval 1.3.6.1.4.1.791.2.9.4.5.1.8.1
&The time, in seconds, between the collections of the physical disk information. Valid ranges: -1 (Suspended), 30 seconds or greater.
OBJECT-TYPE    
  INTEGER  

uxsConfigDiskPollMethod 1.3.6.1.4.1.791.2.9.4.5.1.8.2
&Defines whether the physical disk information is collected. Valid values: disable(1) or use-polling-period(2).
OBJECT-TYPE    
  INTEGER disable(1), use-polling-period(2)  

uxsConfigDiskTPutWarn 1.3.6.1.4.1.791.2.9.4.5.1.8.3
&The value for physical disk throughput in kilobytes per second that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  INTEGER  

uxsConfigDiskTPutCrit 1.3.6.1.4.1.791.2.9.4.5.1.8.4
&The value for physical disk throughput in kilobytes per second that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
OBJECT-TYPE    
  INTEGER  

uxsConfigDiskTPutMonitor 1.3.6.1.4.1.791.2.9.4.5.1.8.5
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsConfigDiskLossAction 1.3.6.1.4.1.791.2.9.4.5.1.8.6
&Defines the action to take if the physical disk is removed from the machine. Valid values: remove(1), up(2) or down(3).
OBJECT-TYPE    
  INTEGER remove(1), up(2), down(3)  

uxsConfigDiskNameAdd 1.3.6.1.4.1.791.2.9.4.5.1.8.7
&Defines the name of the physical disk watcher to add.
OBJECT-TYPE    
  DisplayString  

uxsConfigDiskNameRemove 1.3.6.1.4.1.791.2.9.4.5.1.8.8
&Defines the name of the physical disk watcher to remove.
OBJECT-TYPE    
  DisplayString  

uxsConfigFileGroup 1.3.6.1.4.1.791.2.9.4.5.1.9
OBJECT IDENTIFIER    

uxsConfigFilePollInterval 1.3.6.1.4.1.791.2.9.4.5.1.9.1
&The time, in seconds, between the collections of the file information. Valid ranges: -1 (Suspended), 30 seconds or greater.
OBJECT-TYPE    
  INTEGER  

uxsConfigFilePollMethod 1.3.6.1.4.1.791.2.9.4.5.1.9.2
&Defines whether the file information is collected. Valid values: disable(1) or use-polling-period(2).
OBJECT-TYPE    
  INTEGER disable(1), use-polling-period(2)  

uxsConfigFileDesc 1.3.6.1.4.1.791.2.9.4.5.1.9.3
&The description associated with the file watcher.
OBJECT-TYPE    
  DisplayString  

uxsConfigFileExist 1.3.6.1.4.1.791.2.9.4.5.1.9.4
&The type of existence monitoring to apply to the file watcher. Valid values: should-exist(1) or should-not-exist(2)
OBJECT-TYPE    
  INTEGER should-exist(1), should-not-exist(2)  

uxsConfigFileExistMonitor 1.3.6.1.4.1.791.2.9.4.5.1.9.5
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1) or monitor(2).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), monitor(2)  

uxsConfigFileModTimeMonitor 1.3.6.1.4.1.791.2.9.4.5.1.9.6
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1) or monitor(2).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), monitor(2)  

uxsConfigFileSizeWarn 1.3.6.1.4.1.791.2.9.4.5.1.9.7
&The value for file size, either as a percentage of the total or as an absolute value, that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  DisplayString  

uxsConfigFileSizeCrit 1.3.6.1.4.1.791.2.9.4.5.1.9.8
&The value for file size, either as a percentage of the total or as an absolute value, that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
OBJECT-TYPE    
  DisplayString  

uxsConfigFileSizeMonitor 1.3.6.1.4.1.791.2.9.4.5.1.9.9
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsConfigFileSizeDWarn 1.3.6.1.4.1.791.2.9.4.5.1.9.10
&The value for file size delta, either as a percentage of the total or as an absolute value, that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  DisplayString  

uxsConfigFileSizeDCrit 1.3.6.1.4.1.791.2.9.4.5.1.9.11
&The value for file size delta, either as a percentage of the total or as an absolute value, that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
OBJECT-TYPE    
  DisplayString  

uxsConfigFileSizeDMonitor 1.3.6.1.4.1.791.2.9.4.5.1.9.12
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsConfigFileNameAdd 1.3.6.1.4.1.791.2.9.4.5.1.9.13
&Defines the name of the file watcher to add.
OBJECT-TYPE    
  DisplayString  

uxsConfigFileNameRemove 1.3.6.1.4.1.791.2.9.4.5.1.9.14
&Defines the name of the file watcher to remove.
OBJECT-TYPE    
  DisplayString  

uxsConfigProcGroup 1.3.6.1.4.1.791.2.9.4.5.1.10
OBJECT IDENTIFIER    

uxsConfigProcPollInterval 1.3.6.1.4.1.791.2.9.4.5.1.10.1
&The time, in seconds, between the collections of the process information. Valid ranges: -1 (Suspended), 30 seconds or greater.
OBJECT-TYPE    
  INTEGER  

uxsConfigProcPollMethod 1.3.6.1.4.1.791.2.9.4.5.1.10.2
&Defines whether the process information is collected. Valid values: disable(1) or use-polling-period(2).
OBJECT-TYPE    
  INTEGER disable(1), use-polling-period(2)  

uxsConfigProcPath 1.3.6.1.4.1.791.2.9.4.5.1.10.3
&The path of the process to match. Valid values are a string with an optional * at the end of the string for wild card matching.
OBJECT-TYPE    
  DisplayString  

uxsConfigProcArgs 1.3.6.1.4.1.791.2.9.4.5.1.10.4
&A section of the processes arguments to match.
OBJECT-TYPE    
  DisplayString  

uxsConfigProcUsers 1.3.6.1.4.1.791.2.9.4.5.1.10.5
&List of users to match. Format details of the string are documented in the online help.
OBJECT-TYPE    
  DisplayString  

uxsConfigProcInstMin 1.3.6.1.4.1.791.2.9.4.5.1.10.6
&Minimum number of instances expected to match the key. Valid values: -1, 0 or greater.
OBJECT-TYPE    
  INTEGER  

uxsConfigProcInstMax 1.3.6.1.4.1.791.2.9.4.5.1.10.7
&Maximum number of instances expected to match the key. Valid values: -1, 0 or greater.
OBJECT-TYPE    
  INTEGER  

uxsConfigProcInstMonitor 1.3.6.1.4.1.791.2.9.4.5.1.10.8
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1) or monitor(2).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), monitor(2)  

uxsConfigProcChldMin 1.3.6.1.4.1.791.2.9.4.5.1.10.9
&Minimum number of children (based on lowest for all instances). Valid values: -1, 0 or greater.
OBJECT-TYPE    
  INTEGER  

uxsConfigProcChldMax 1.3.6.1.4.1.791.2.9.4.5.1.10.10
&Maximum number of children (based on highest for all instances). Valid values: -1, 0 or greater.
OBJECT-TYPE    
  INTEGER  

uxsConfigProcChldMonitor 1.3.6.1.4.1.791.2.9.4.5.1.10.11
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1) or monitor(2).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), monitor(2)  

uxsConfigProcSizeMin 1.3.6.1.4.1.791.2.9.4.5.1.10.12
&Minimum size in kilobytes (based on lowest for all instances). Valid values: -1, 0 or greater.
OBJECT-TYPE    
  INTEGER  

uxsConfigProcSizeMax 1.3.6.1.4.1.791.2.9.4.5.1.10.13
&Maximum size in kilobytes (based on highest for all instances). Valid values: -1, 0 or greater.
OBJECT-TYPE    
  INTEGER  

uxsConfigProcSizeMonitor 1.3.6.1.4.1.791.2.9.4.5.1.10.14
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1) or monitor(2).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), monitor(2)  

uxsConfigProcCPUWarn 1.3.6.1.4.1.791.2.9.4.5.1.10.15
&The percentage of used CPU that is considered a warning level for that resource. Valid ranges: Greater than 0, less than 100, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  INTEGER  

uxsConfigProcCPUCrit 1.3.6.1.4.1.791.2.9.4.5.1.10.16
&The percentage of used CPU, that is considered a critical level for that resource. Valid ranges: Greater than 1, less than or equal to 100, not less than or equal to the warning threshold.
OBJECT-TYPE    
  INTEGER  

uxsConfigProcCPUMonitor 1.3.6.1.4.1.791.2.9.4.5.1.10.17
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsConfigProcNameAdd 1.3.6.1.4.1.791.2.9.4.5.1.10.18
&The name of the process to monitor. Valid values are a string with an optional * at the end of the string for wild card matching. Note: Setting this attribute causes the watcher to be added.
OBJECT-TYPE    
  DisplayString  

uxsConfigProcNameRemove 1.3.6.1.4.1.791.2.9.4.5.1.10.19
&The process name of the watcher to delete. Set this attribute with the other KEY fields. Setting this causes the delete action.
OBJECT-TYPE    
  DisplayString  

uxsConfigProcNameSig 1.3.6.1.4.1.791.2.9.4.5.1.10.20
&The number of significant bytes that the agent uses for matching the process name against.
OBJECT-TYPE    
  INTEGER  

uxsConfigProcPathSig 1.3.6.1.4.1.791.2.9.4.5.1.10.21
&The number of significant bytes that the agent uses for matching the process path against.
OBJECT-TYPE    
  INTEGER  

uxsConfigProcArgsSig 1.3.6.1.4.1.791.2.9.4.5.1.10.22
&The number of significant bytes that the agent uses for matching the process arguments against.
OBJECT-TYPE    
  INTEGER  

uxsConfigPrnGroup 1.3.6.1.4.1.791.2.9.4.5.1.11
OBJECT IDENTIFIER    

uxsConfigPrnPollInterval 1.3.6.1.4.1.791.2.9.4.5.1.11.1
&The time, in seconds, between the collections of the printer queue information. Valid ranges: -1 (Suspended), 30 seconds or greater.
OBJECT-TYPE    
  INTEGER  

uxsConfigPrnPollMethod 1.3.6.1.4.1.791.2.9.4.5.1.11.2
&Defines whether the printer queue information is collected. Valid values: disable(1) or use-polling-period(2).
OBJECT-TYPE    
  INTEGER disable(1), use-polling-period(2)  

uxsConfigPrnDesc 1.3.6.1.4.1.791.2.9.4.5.1.11.3
&Description of the printer queue watcher.
OBJECT-TYPE    
  DisplayString  

uxsConfigPrnItemsWarn 1.3.6.1.4.1.791.2.9.4.5.1.11.4
&The number of items on the printer queue that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  INTEGER  

uxsConfigPrnItemsCrit 1.3.6.1.4.1.791.2.9.4.5.1.11.5
&The number of items on the printer queue that is considered a critical level for that resource. Valid ranges: Greater than 0, not less than or equal to the warning threshold.
OBJECT-TYPE    
  INTEGER  

uxsConfigPrnItemsMonitor 1.3.6.1.4.1.791.2.9.4.5.1.11.6
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsConfigPrnLossAction 1.3.6.1.4.1.791.2.9.4.5.1.11.7
&Defines the action to take if the printer queue configuration is removed from the machine. Valid values: remove(1), up(2) or down(3).
OBJECT-TYPE    
  INTEGER remove(1), up(2), down(3)  

uxsConfigPrnNameAdd 1.3.6.1.4.1.791.2.9.4.5.1.11.8
&Setting this attribute causes a new watcher to be added for the printer queue name specified.
OBJECT-TYPE    
  DisplayString  

uxsConfigPrnNameRemove 1.3.6.1.4.1.791.2.9.4.5.1.11.9
&Setting this attribute causes the watcher with the printer queue name specified to be deleted.
OBJECT-TYPE    
  DisplayString  

uxsConfigNetGroup 1.3.6.1.4.1.791.2.9.4.5.1.12
OBJECT IDENTIFIER    

uxsConfigNetPollInterval 1.3.6.1.4.1.791.2.9.4.5.1.12.1
&The time, in seconds, between the collections of the Network Interface information. Valid ranges: -1 (Suspended), 30 seconds or greater.
OBJECT-TYPE    
  INTEGER  

uxsConfigNetPollMethod 1.3.6.1.4.1.791.2.9.4.5.1.12.2
&Defines whether the Network Interface information is collected. Valid values: disable(1) or use-polling-period(2).
OBJECT-TYPE    
  INTEGER disable(1), use-polling-period(2)  

uxsConfigNetIPktWarn 1.3.6.1.4.1.791.2.9.4.5.1.12.3
&The number of input packets per second that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  INTEGER  

uxsConfigNetIPktCrit 1.3.6.1.4.1.791.2.9.4.5.1.12.4
&The number of input packets per second that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
OBJECT-TYPE    
  INTEGER  

uxsConfigNetIPktMonitor 1.3.6.1.4.1.791.2.9.4.5.1.12.5
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsConfigNetIErrWarn 1.3.6.1.4.1.791.2.9.4.5.1.12.6
&The number of input errors per second that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  INTEGER  

uxsConfigNetIErrCrit 1.3.6.1.4.1.791.2.9.4.5.1.12.7
&The number of input errors per second that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
OBJECT-TYPE    
  INTEGER  

uxsConfigNetIErrMonitor 1.3.6.1.4.1.791.2.9.4.5.1.12.8
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsConfigNetOPktWarn 1.3.6.1.4.1.791.2.9.4.5.1.12.9
&The number of output packets per second that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  INTEGER  

uxsConfigNetOPktCrit 1.3.6.1.4.1.791.2.9.4.5.1.12.10
&The number of output packets per second that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
OBJECT-TYPE    
  INTEGER  

uxsConfigNetOPktMonitor 1.3.6.1.4.1.791.2.9.4.5.1.12.11
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsConfigNetOErrWarn 1.3.6.1.4.1.791.2.9.4.5.1.12.12
&The number of output errors per second that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  INTEGER  

uxsConfigNetOErrCrit 1.3.6.1.4.1.791.2.9.4.5.1.12.13
&The number of output errors per second that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
OBJECT-TYPE    
  INTEGER  

uxsConfigNetOErrMonitor 1.3.6.1.4.1.791.2.9.4.5.1.12.14
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsConfigNetCollWarn 1.3.6.1.4.1.791.2.9.4.5.1.12.15
&The number of collisions per second that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  INTEGER  

uxsConfigNetCollCrit 1.3.6.1.4.1.791.2.9.4.5.1.12.16
&The number of collisions per second that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
OBJECT-TYPE    
  INTEGER  

uxsConfigNetCollMonitor 1.3.6.1.4.1.791.2.9.4.5.1.12.17
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsConfigNetLossAction 1.3.6.1.4.1.791.2.9.4.5.1.12.18
&Defines the action to take if the Network Interface is removed from the machine. Valid values: remove(1), up(2) or down(3).
OBJECT-TYPE    
  INTEGER remove(1), up(2), down(3)  

uxsConfigIPCGroup 1.3.6.1.4.1.791.2.9.4.5.1.13
OBJECT IDENTIFIER    

uxsConfigIPCPollInterval 1.3.6.1.4.1.791.2.9.4.5.1.13.1
&The time, in seconds, between the collections of the Inter Process Communications information. Valid ranges: -1 (Suspended), 30 seconds or greater.
OBJECT-TYPE    
  INTEGER  

uxsConfigIPCPollMethod 1.3.6.1.4.1.791.2.9.4.5.1.13.2
&Defines whether the Inter Process Communications information is collected. Valid values: disable(1) or use-polling-period(2).
OBJECT-TYPE    
  INTEGER disable(1), use-polling-period(2)  

uxsConfigIPCMQBytesLag 1.3.6.1.4.1.791.2.9.4.5.1.13.3
&The number of times that the threshold has to be reached before the state changes. Valid range: Greater than 0.
OBJECT-TYPE    
  INTEGER  

uxsConfigIPCMQBytesWarn 1.3.6.1.4.1.791.2.9.4.5.1.13.4
&The value for used message queue bytes that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  DisplayString  

uxsConfigIPCMQBytesCrit 1.3.6.1.4.1.791.2.9.4.5.1.13.5
&The value for used message queue bytes that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
OBJECT-TYPE    
  DisplayString  

uxsConfigIPCMQBytesMonitor 1.3.6.1.4.1.791.2.9.4.5.1.13.6
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusGroup 1.3.6.1.4.1.791.2.9.4.5.2
OBJECT IDENTIFIER    

uxsStatusGeneralGroup 1.3.6.1.4.1.791.2.9.4.5.2.1
OBJECT IDENTIFIER    

uxsStatusGeneralTotalCount 1.3.6.1.4.1.791.2.9.4.5.2.1.1
&Total number of resources that the agent is configured to monitor.
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralTotalWarning 1.3.6.1.4.1.791.2.9.4.5.2.1.2
&Total number of the resources that the agent is configured to monitor that are in a warning state.
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralTotalCritical 1.3.6.1.4.1.791.2.9.4.5.2.1.3
&Total number of the resources that the agent is configured to monitor that are in a critical state.
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralCPUCount 1.3.6.1.4.1.791.2.9.4.5.2.1.4
&The total number of this resource type that are being monitored.
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralCPUWarning 1.3.6.1.4.1.791.2.9.4.5.2.1.5
&The total number of this resource type that are being monitored and are in a warning state.
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralCPUCritical 1.3.6.1.4.1.791.2.9.4.5.2.1.6
&The total number of this resource type that are being monitored and are in a critical state.
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralLoadCount 1.3.6.1.4.1.791.2.9.4.5.2.1.7
&The total number of this resource type that are being monitored.
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralLoadWarning 1.3.6.1.4.1.791.2.9.4.5.2.1.8
&The total number of this resource type that are being monitored and are in a warning state.
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralLoadCritical 1.3.6.1.4.1.791.2.9.4.5.2.1.9
&The total number of this resource type that are being monitored and are in a critical state.
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralMemCount 1.3.6.1.4.1.791.2.9.4.5.2.1.10
&The total number of this resource type that are being monitored.
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralMemWarning 1.3.6.1.4.1.791.2.9.4.5.2.1.11
&The total number of this resource type that are being monitored and are in a warning state.
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralMemCritical 1.3.6.1.4.1.791.2.9.4.5.2.1.12
&The total number of this resource type that are being monitored and are in a critical state.
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralSwapCount 1.3.6.1.4.1.791.2.9.4.5.2.1.13
&The total number of this resource type that are being monitored.
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralSwapWarning 1.3.6.1.4.1.791.2.9.4.5.2.1.14
&The total number of this resource type that are being monitored and are in a warning state.
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralSwapCritical 1.3.6.1.4.1.791.2.9.4.5.2.1.15
&The total number of this resource type that are being monitored and are in a critical state.
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralFSysCount 1.3.6.1.4.1.791.2.9.4.5.2.1.16
&The total number of this resource type that are being monitored.
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralFSysWarning 1.3.6.1.4.1.791.2.9.4.5.2.1.17
&The total number of this resource type that are being monitored and are in a warning state.
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralFSysCritical 1.3.6.1.4.1.791.2.9.4.5.2.1.18
&The total number of this resource type that are being monitored and are in a critical state.
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralDiskCount 1.3.6.1.4.1.791.2.9.4.5.2.1.19
&The total number of this resource type that are being monitored.
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralDiskWarning 1.3.6.1.4.1.791.2.9.4.5.2.1.20
&The total number of this resource type that are being monitored and are in a warning state.
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralDiskCritical 1.3.6.1.4.1.791.2.9.4.5.2.1.21
&The total number of this resource type that are being monitored and are in a critical state.
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralFileCount 1.3.6.1.4.1.791.2.9.4.5.2.1.22
&The total number of this resource type that are being monitored.
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralFileWarning 1.3.6.1.4.1.791.2.9.4.5.2.1.23
&The total number of this resource type that are being monitored and are in a warning state.
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralFileCritical 1.3.6.1.4.1.791.2.9.4.5.2.1.24
&The total number of this resource type that are being monitored and are in a critical state.
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralProcCount 1.3.6.1.4.1.791.2.9.4.5.2.1.25
&The total number of this resource type that are being monitored.
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralProcWarning 1.3.6.1.4.1.791.2.9.4.5.2.1.26
&The total number of this resource type that are being monitored and are in a warning state.
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralProcCritical 1.3.6.1.4.1.791.2.9.4.5.2.1.27
&The total number of this resource type that are being monitored and are in a critical state.
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralPrnCount 1.3.6.1.4.1.791.2.9.4.5.2.1.28
&The total number of this resource type that are being monitored.
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralPrnWarning 1.3.6.1.4.1.791.2.9.4.5.2.1.29
&The total number of this resource type that are being monitored and are in a warning state.
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralPrnCritical 1.3.6.1.4.1.791.2.9.4.5.2.1.30
&The total number of this resource type that are being monitored and are in a critical state.
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralNetCount 1.3.6.1.4.1.791.2.9.4.5.2.1.31
&The total number of this resource type that are being monitored.
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralNetWarning 1.3.6.1.4.1.791.2.9.4.5.2.1.32
&The total number of this resource type that are being monitored and are in a warning state.
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralNetCritical 1.3.6.1.4.1.791.2.9.4.5.2.1.33
&The total number of this resource type that are being monitored and are in a critical state.
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralIPCCount 1.3.6.1.4.1.791.2.9.4.5.2.1.34
&The total number of this resource type that are being monitored.
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralIPCWarning 1.3.6.1.4.1.791.2.9.4.5.2.1.35
&The total number of this resource type that are being monitored and are in a warning state.
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralIPCCritical 1.3.6.1.4.1.791.2.9.4.5.2.1.36
&The total number of this resource type that are being monitored and are in a critical state.
OBJECT-TYPE    
  INTEGER  

uxsStatusCPUGroup 1.3.6.1.4.1.791.2.9.4.5.2.2
OBJECT IDENTIFIER    

uxsStatusCPUTotalName 1.3.6.1.4.1.791.2.9.4.5.2.2.1
&The name the agent gives for the total number of CPUs.
OBJECT-TYPE    
  DisplayString  

uxsStatusCPUTotalUser 1.3.6.1.4.1.791.2.9.4.5.2.2.2
&The percentage of time that the CPUs spent servicing user requests.
OBJECT-TYPE    
  INTEGER  

uxsStatusCPUTotalSys 1.3.6.1.4.1.791.2.9.4.5.2.2.3
&The percentage of time that the CPUs spent servicing system requests.
OBJECT-TYPE    
  INTEGER  

uxsStatusCPUTotalIdle 1.3.6.1.4.1.791.2.9.4.5.2.2.4
&The percentage of time that the CPUs were idle.
OBJECT-TYPE    
  INTEGER  

uxsStatusCPUTotalWIO 1.3.6.1.4.1.791.2.9.4.5.2.2.5
&The percentage of time that the CPUs spent waiting for blocking I/O requests.
OBJECT-TYPE    
  INTEGER  

uxsStatusCPUTotalUsedValue 1.3.6.1.4.1.791.2.9.4.5.2.2.6
&The total percentage of the CPUs' time that the processors were busy. i.e. 100 - idle%.
OBJECT-TYPE    
  INTEGER  

uxsStatusCPUTotalLagValue 1.3.6.1.4.1.791.2.9.4.5.2.2.7
&The number of times that the threshold has been reached.
OBJECT-TYPE    
  INTEGER  

uxsStatusCPUTotalLag 1.3.6.1.4.1.791.2.9.4.5.2.2.8
&The number of times that the threshold has to be reached before the state changes. Valid range: Greater than 0.
OBJECT-TYPE    
  INTEGER  

uxsStatusCPUTotalWarn 1.3.6.1.4.1.791.2.9.4.5.2.2.9
&The percentage of total CPU usage that is considered a warning level for that resource. Valid ranges: Greater than 0, less than 99, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  DisplayString  

uxsStatusCPUTotalCrit 1.3.6.1.4.1.791.2.9.4.5.2.2.10
&The percentage of total CPU usage that is considered a critical level for that resource. Valid ranges: Greater than 1, less than 100, not less than or equal to the warning threshold.
OBJECT-TYPE    
  DisplayString  

uxsStatusCPUTotalMonitor 1.3.6.1.4.1.791.2.9.4.5.2.2.11
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusCPUTotalStatus 1.3.6.1.4.1.791.2.9.4.5.2.2.12
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusCPUCount 1.3.6.1.4.1.791.2.9.4.5.2.2.13
&The number of CPU instances in the table.
OBJECT-TYPE    
  INTEGER  

uxsStatusCPUTable 1.3.6.1.4.1.791.2.9.4.5.2.2.14
&The table of CPU instances.
OBJECT-TYPE    
  SEQUENCE OF  
    UxsStatusCPUSequence

uxsStatusCPUEntry 1.3.6.1.4.1.791.2.9.4.5.2.2.14.1
&
OBJECT-TYPE    
  UxsStatusCPUSequence  

uxsStatusCPUName 1.3.6.1.4.1.791.2.9.4.5.2.2.14.1.1
&The name the agent gives the first CPU on which it gets details. No assumptions should be made about which slot the CPU is in from the CPU name.
OBJECT-TYPE    
  DisplayString  

uxsStatusCPUUser 1.3.6.1.4.1.791.2.9.4.5.2.2.14.1.2
&The percentage of time that the processor was doing user work.
OBJECT-TYPE    
  INTEGER  

uxsStatusCPUSys 1.3.6.1.4.1.791.2.9.4.5.2.2.14.1.3
&The percentage of time that the processor was doing system work.
OBJECT-TYPE    
  INTEGER  

uxsStatusCPUIdle 1.3.6.1.4.1.791.2.9.4.5.2.2.14.1.4
&The percentage of time that the processor was idle.
OBJECT-TYPE    
  INTEGER  

uxsStatusCPUWIO 1.3.6.1.4.1.791.2.9.4.5.2.2.14.1.5
&The percentage of time that the processor was waiting for I/O.
OBJECT-TYPE    
  INTEGER  

uxsStatusCPUAggStatus 1.3.6.1.4.1.791.2.9.4.5.2.2.14.1.6
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold, down(5) - The resource is in a down state.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4), down(5)  

uxsStatusCPUUsedValue 1.3.6.1.4.1.791.2.9.4.5.2.2.14.1.7
&The percentage of time that the processor was busy. i.e. 100 - idle%.
OBJECT-TYPE    
  INTEGER  

uxsStatusCPULagValue 1.3.6.1.4.1.791.2.9.4.5.2.2.14.1.8
&The number of times that the threshold has been reached.
OBJECT-TYPE    
  INTEGER  

uxsStatusCPULag 1.3.6.1.4.1.791.2.9.4.5.2.2.14.1.9
&The number of times that the threshold has to be reached before the state changes. Valid range: Greater than 0.
OBJECT-TYPE    
  INTEGER  

uxsStatusCPUWarn 1.3.6.1.4.1.791.2.9.4.5.2.2.14.1.10
&The value for the CPU used percentage that is considered a warning level for that resource. Valid ranges: Greater than 0, less than 99, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  DisplayString  

uxsStatusCPUCrit 1.3.6.1.4.1.791.2.9.4.5.2.2.14.1.11
&The value for the CPU used percentage that is considered a critical level for that resource. Valid ranges: Greater than 1, less than 100, not less than or equal to the warning threshold.
OBJECT-TYPE    
  DisplayString  

uxsStatusCPUMonitor 1.3.6.1.4.1.791.2.9.4.5.2.2.14.1.12
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusCPUStatus 1.3.6.1.4.1.791.2.9.4.5.2.2.14.1.13
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusCPULossAction 1.3.6.1.4.1.791.2.9.4.5.2.2.14.1.14
&Defines the action to take if the CPU is removed from the machine. Valid values: remove(1), up(2) or down(3).
OBJECT-TYPE    
  INTEGER remove(1), up(2), down(3)  

uxsStatusCPULossStatus 1.3.6.1.4.1.791.2.9.4.5.2.2.14.1.15
&The status relating to the existence of the object. Valid values: unknown(1), up(2) or down(3).
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down(3)  

uxsStatusLoadGroup 1.3.6.1.4.1.791.2.9.4.5.2.3
OBJECT IDENTIFIER    

uxsStatusLoad1MinValue 1.3.6.1.4.1.791.2.9.4.5.2.3.1
&The current 1 minute average value.
OBJECT-TYPE    
  DisplayString  

uxsStatusLoad1MinWarn 1.3.6.1.4.1.791.2.9.4.5.2.3.2
&The value for load average that is considered a warning level for that resource. Valid ranges: Greater than 0.000000, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  DisplayString  

uxsStatusLoad1MinCrit 1.3.6.1.4.1.791.2.9.4.5.2.3.3
&The value for load average that is considered a critical level for that resource. Valid ranges: Greater than 0.000001, not less than or equal to the warning threshold.
OBJECT-TYPE    
  DisplayString  

uxsStatusLoad1MinMonitor 1.3.6.1.4.1.791.2.9.4.5.2.3.4
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusLoad1MinStatus 1.3.6.1.4.1.791.2.9.4.5.2.3.5
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusLoad5MinValue 1.3.6.1.4.1.791.2.9.4.5.2.3.6
&The current 5 minute average value.
OBJECT-TYPE    
  DisplayString  

uxsStatusLoad5MinWarn 1.3.6.1.4.1.791.2.9.4.5.2.3.7
&The value for load average that is considered a warning level for that resource. Valid ranges: Greater than 0.000000, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  DisplayString  

uxsStatusLoad5MinCrit 1.3.6.1.4.1.791.2.9.4.5.2.3.8
&The value for load average that is considered a critical level for that resource. Valid ranges: Greater than 0.000001, not less than or equal to the warning threshold.
OBJECT-TYPE    
  DisplayString  

uxsStatusLoad5MinMonitor 1.3.6.1.4.1.791.2.9.4.5.2.3.9
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusLoad5MinStatus 1.3.6.1.4.1.791.2.9.4.5.2.3.10
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusLoad15MinValue 1.3.6.1.4.1.791.2.9.4.5.2.3.11
&The current 15 minute average value.
OBJECT-TYPE    
  DisplayString  

uxsStatusLoad15MinWarn 1.3.6.1.4.1.791.2.9.4.5.2.3.12
&The value for load average that is considered a warning level for that resource. Valid ranges: Greater than 0.000000, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  DisplayString  

uxsStatusLoad15MinCrit 1.3.6.1.4.1.791.2.9.4.5.2.3.13
&The value for load average that is considered a critical level for that resource. Valid ranges: Greater than 0.000001, not less than or equal to the warning threshold.
OBJECT-TYPE    
  DisplayString  

uxsStatusLoad15MinMonitor 1.3.6.1.4.1.791.2.9.4.5.2.3.14
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusLoad15MinStatus 1.3.6.1.4.1.791.2.9.4.5.2.3.15
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusMemGroup 1.3.6.1.4.1.791.2.9.4.5.2.4
OBJECT IDENTIFIER    

uxsStatusMemTotal 1.3.6.1.4.1.791.2.9.4.5.2.4.1
&The total memory configured on the machine in kilobytes.
OBJECT-TYPE    
  INTEGER  

uxsStatusMemValue 1.3.6.1.4.1.791.2.9.4.5.2.4.2
&The memory used by the machine in kilobytes.
OBJECT-TYPE    
  INTEGER  

uxsStatusMemLagValue 1.3.6.1.4.1.791.2.9.4.5.2.4.3
&The number of times that the threshold has been reached.
OBJECT-TYPE    
  INTEGER  

uxsStatusMemLag 1.3.6.1.4.1.791.2.9.4.5.2.4.4
&The number of times that the threshold has to be reached before the state changes. Valid range: Greater than 0.
OBJECT-TYPE    
  INTEGER  

uxsStatusMemWarnValue 1.3.6.1.4.1.791.2.9.4.5.2.4.5
&The absolute value used for threshold calculation based on the configured warning value.
OBJECT-TYPE    
  DisplayString  

uxsStatusMemCritValue 1.3.6.1.4.1.791.2.9.4.5.2.4.6
&The absolute value used for threshold calculation based on the configured critical value.
OBJECT-TYPE    
  DisplayString  

uxsStatusMemWarn 1.3.6.1.4.1.791.2.9.4.5.2.4.7
&The value for used memory, either as a percentage or in kilobytes, that is considered a warning level for that resource. Valid ranges: Greater than 0, less than total memory - 1, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  DisplayString  

uxsStatusMemCrit 1.3.6.1.4.1.791.2.9.4.5.2.4.8
&The value for used memory, either as a percentage or in kilobytes, that is considered a critical level for that resource. Valid ranges: Greater than 1, less than total memory, not less than or equal to the warning threshold.
OBJECT-TYPE    
  DisplayString  

uxsStatusMemMonitor 1.3.6.1.4.1.791.2.9.4.5.2.4.9
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusMemStatus 1.3.6.1.4.1.791.2.9.4.5.2.4.10
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusSwapGroup 1.3.6.1.4.1.791.2.9.4.5.2.5
OBJECT IDENTIFIER    

uxsStatusSwapTotalName 1.3.6.1.4.1.791.2.9.4.5.2.5.1
&The name the agent gives the total swap information.
OBJECT-TYPE    
  DisplayString  

uxsStatusSwapTotalAvailable 1.3.6.1.4.1.791.2.9.4.5.2.5.2
&The total amount of swap configured on the machine in kilobytes.
OBJECT-TYPE    
  INTEGER  

uxsStatusSwapTotalUsedValue 1.3.6.1.4.1.791.2.9.4.5.2.5.3
&The total amount of swap space in use on the machine in kilobytes.
OBJECT-TYPE    
  INTEGER  

uxsStatusSwapTotalLagValue 1.3.6.1.4.1.791.2.9.4.5.2.5.4
&The number of times that the threshold has been reached.
OBJECT-TYPE    
  INTEGER  

uxsStatusSwapTotalLag 1.3.6.1.4.1.791.2.9.4.5.2.5.5
&The number of times that the threshold has to be reached before the state changes. Valid range: Greater than 0.
OBJECT-TYPE    
  INTEGER  

uxsStatusSwapTotalWarnValue 1.3.6.1.4.1.791.2.9.4.5.2.5.6
&The absolute value used for threshold calculation based on the configured warning value.
OBJECT-TYPE    
  DisplayString  

uxsStatusSwapTotalCritValue 1.3.6.1.4.1.791.2.9.4.5.2.5.7
&The absolute value used for threshold calculation based on the configured critical value.
OBJECT-TYPE    
  DisplayString  

uxsStatusSwapTotalWarn 1.3.6.1.4.1.791.2.9.4.5.2.5.8
&The value for total swap space, either as a percentage or in kilobytes, that is considered a warning level for that resource. Valid ranges: Greater than 0, less than total swap space - 1, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  DisplayString  

uxsStatusSwapTotalCrit 1.3.6.1.4.1.791.2.9.4.5.2.5.9
&The value for total swap space, either as a percentage or in kilobytes, that is considered a critical level for that resource. Valid ranges: Greater than 1, less than total swap space, not less than or equal to the warning threshold.
OBJECT-TYPE    
  DisplayString  

uxsStatusSwapTotalMonitor 1.3.6.1.4.1.791.2.9.4.5.2.5.10
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusSwapTotalStatus 1.3.6.1.4.1.791.2.9.4.5.2.5.11
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusSwapCount 1.3.6.1.4.1.791.2.9.4.5.2.5.12
&Number of swap partitions in the swap table.
OBJECT-TYPE    
  INTEGER  

uxsStatusSwapTable 1.3.6.1.4.1.791.2.9.4.5.2.5.13
&The table detailing the individual swap devices.
OBJECT-TYPE    
  SEQUENCE OF  
    UxsStatusSwapSequence

uxsStatusSwapEntry 1.3.6.1.4.1.791.2.9.4.5.2.5.13.1
&
OBJECT-TYPE    
  UxsStatusSwapSequence  

uxsStatusSwapName 1.3.6.1.4.1.791.2.9.4.5.2.5.13.1.1
&The name of the swap device that this watcher monitors.
OBJECT-TYPE    
  DisplayString  

uxsStatusSwapAggStatus 1.3.6.1.4.1.791.2.9.4.5.2.5.13.1.2
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold, down(5) - The resource is in a down state.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4), down(5)  

uxsStatusSwapAvailable 1.3.6.1.4.1.791.2.9.4.5.2.5.13.1.3
&The amount of swap configured on the device in kilobytes.
OBJECT-TYPE    
  INTEGER  

uxsStatusSwapUsedValue 1.3.6.1.4.1.791.2.9.4.5.2.5.13.1.4
&The amount of swap space in use on the device in kilobytes.
OBJECT-TYPE    
  INTEGER  

uxsStatusSwapLagValue 1.3.6.1.4.1.791.2.9.4.5.2.5.13.1.5
&The number of times that the threshold has been reached.
OBJECT-TYPE    
  INTEGER  

uxsStatusSwapLag 1.3.6.1.4.1.791.2.9.4.5.2.5.13.1.6
&The number of times that the threshold has to be reached before the state changes. Valid range: Greater than 0.
OBJECT-TYPE    
  INTEGER  

uxsStatusSwapWarnValue 1.3.6.1.4.1.791.2.9.4.5.2.5.13.1.7
&The absolute value used for threshold calculation based on the configured warning value.
OBJECT-TYPE    
  DisplayString  

uxsStatusSwapCritValue 1.3.6.1.4.1.791.2.9.4.5.2.5.13.1.8
&The absolute value used for threshold calculation based on the configured critical value.
OBJECT-TYPE    
  DisplayString  

uxsStatusSwapWarn 1.3.6.1.4.1.791.2.9.4.5.2.5.13.1.9
&The value for device swap space, either as a percentage or in kilobytes, that is considered a warning level for that resource. Valid ranges: Greater than 0, less than device swap space - 1, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  DisplayString  

uxsStatusSwapCrit 1.3.6.1.4.1.791.2.9.4.5.2.5.13.1.10
&The value for device swap space, either as a percentage or in kilobytes, that is considered a critical level for that resource. Valid ranges: Greater than 1, less than device swap space, not less than or equal to the warning threshold.
OBJECT-TYPE    
  DisplayString  

uxsStatusSwapMonitor 1.3.6.1.4.1.791.2.9.4.5.2.5.13.1.11
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusSwapStatus 1.3.6.1.4.1.791.2.9.4.5.2.5.13.1.12
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusSwapLossAction 1.3.6.1.4.1.791.2.9.4.5.2.5.13.1.13
&Defines the action to take if the swap file is removed from the machine. Valid values: remove(1), up(2) or down(3).
OBJECT-TYPE    
  INTEGER remove(1), up(2), down(3)  

uxsStatusSwapLossStatus 1.3.6.1.4.1.791.2.9.4.5.2.5.13.1.14
&The status relating to the existence of the object. Valid values: unknown(1), up(2) or down(3).
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down(3)  

uxsStatusFSysGroup 1.3.6.1.4.1.791.2.9.4.5.2.6
OBJECT IDENTIFIER    

uxsStatusFSysCount 1.3.6.1.4.1.791.2.9.4.5.2.6.1
&The number of monitored file systems.
OBJECT-TYPE    
  INTEGER  

uxsStatusFSysTable 1.3.6.1.4.1.791.2.9.4.5.2.6.2
&The table of monitored file systems.
OBJECT-TYPE    
  SEQUENCE OF  
    UxsStatusFSysSequence

uxsStatusFSysEntry 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1
&
OBJECT-TYPE    
  UxsStatusFSysSequence  

uxsStatusFSysName 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.1
&The file system mount name.
OBJECT-TYPE    
  DisplayString  

uxsStatusFSysRelatedTo 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.2
&The device from which the file system is mounted.
OBJECT-TYPE    
  DisplayString  

uxsStatusFSysType 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.3
&The type of the mounted file system. The value is platform dependent.
OBJECT-TYPE    
  DisplayString  

uxsStatusFSysStatus 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.4
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold, down(5) - The resource is in a down state.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4), down(5)  

uxsStatusFSysSpaceTotal 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.5
&The amount of space available on the file system in kilobytes.
OBJECT-TYPE    
  INTEGER  

uxsStatusFSysSpaceValue 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.6
&The amount of space used on the file system in kilobytes.
OBJECT-TYPE    
  INTEGER  

uxsStatusFSysSpaceWarnValue 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.7
&The absolute value used for threshold calculation based on the configured warning value.
OBJECT-TYPE    
  DisplayString  

uxsStatusFSysSpaceCritValue 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.8
&The absolute value used for threshold calculation based on the configured critical value.
OBJECT-TYPE    
  DisplayString  

uxsStatusFSysSpaceWarn 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.9
&The value for used file system space, either as a percentage or in kilobytes, that is considered a warning level for that resource. Valid ranges: Greater than 0, less than total space - 1, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  DisplayString  

uxsStatusFSysSpaceCrit 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.10
&The value for used file system space, either as a percentage or in kilobytes, that is considered a critical level for that resource. Valid ranges: Greater than 1, less than total space, not less than or equal to the warning threshold.
OBJECT-TYPE    
  DisplayString  

uxsStatusFSysSpaceMonitor 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.11
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusFSysSpaceStatus 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.12
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusFSysSpaceDValue 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.13
&The difference of used space, in kilobytes, since the last poll.
OBJECT-TYPE    
  INTEGER  

uxsStatusFSysSpaceDWarnValue 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.14
&The absolute value used for threshold calculation based on the configured warning value.
OBJECT-TYPE    
  DisplayString  

uxsStatusFSysSpaceDCritValue 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.15
&The absolute value used for threshold calculation based on the configured critical value.
OBJECT-TYPE    
  DisplayString  

uxsStatusFSysSpaceDWarn 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.16
&The value for used file system space delta, either as a percentage or in kilobytes, that is considered a warning level for that resource. Valid ranges: Greater than 0, less than total space - 1, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  DisplayString  

uxsStatusFSysSpaceDCrit 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.17
&The value for used file system space delta, either as a percentage or in kilobytes, that is considered a critical level for that resource. Valid ranges: Greater than 1, less than total memory, not less than or equal to the warning threshold.
OBJECT-TYPE    
  DisplayString  

uxsStatusFSysSpaceDMonitor 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.18
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusFSysSpaceDStatus 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.19
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusFSysInodesTotal 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.20
&The amount of inodes configured on the file system.
OBJECT-TYPE    
  INTEGER  

uxsStatusFSysInodesValue 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.21
&The amount of used inodes on the file system.
OBJECT-TYPE    
  INTEGER  

uxsStatusFSysInodesWarnValue 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.22
&The absolute value used for threshold calculation based on the configured warning value.
OBJECT-TYPE    
  DisplayString  

uxsStatusFSysInodesCritValue 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.23
&The absolute value used for threshold calculation based on the configured critical value.
OBJECT-TYPE    
  DisplayString  

uxsStatusFSysInodesWarn 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.24
&The value for inodes, either as a percentage or absolute value, that is considered a warning level for that resource. Valid ranges: Greater than 0, less than total inodes - 1, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  DisplayString  

uxsStatusFSysInodesCrit 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.25
&The value for inodes, either as a percentage or absolute value, that is considered a critical level for that resource. Valid ranges: Greater than 1, less than total space, not less than or equal to the warning threshold.
OBJECT-TYPE    
  DisplayString  

uxsStatusFSysInodesMonitor 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.26
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusFSysInodesStatus 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.27
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusFSysInodesDValue 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.28
&The difference in the number of used inodes since the last poll.
OBJECT-TYPE    
  INTEGER  

uxsStatusFSysInodesDWarnValue 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.29
&The absolute value used for threshold calculation based on the configured warning value.
OBJECT-TYPE    
  DisplayString  

uxsStatusFSysInodesDCritValue 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.30
&The absolute value used for threshold calculation based on the configured critical value.
OBJECT-TYPE    
  DisplayString  

uxsStatusFSysInodesDWarn 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.31
&The value for inodes delta, either as a percentage or absolute value, that is considered a warning level for that resource. Valid ranges: Greater than 0, less than total inodes - 1, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  DisplayString  

uxsStatusFSysInodesDCrit 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.32
&The value for inodes delta, either as a percentage or absolute value, that is considered a critical level for that resource. Valid ranges: Greater than 1, less than total space, not less than or equal to the warning threshold.
OBJECT-TYPE    
  DisplayString  

uxsStatusFSysInodesDMonitor 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.33
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusFSysInodesDStatus 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.34
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusFSysMountedMonitor 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.35
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1) or monitor(2).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), monitor(2)  

uxsStatusFSysMountedStatus 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.36
&The mounted status of the device: unknown(1) - An error occurred collecting the file system information. up(2) - The file system is mounted, down(3) The file system is not mounted.
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down(3)  

uxsStatusFSysLossAction 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.37
&Defines the action to take if the file system is removed from the file system table. Valid values: remove(1), up(2) or down(3).
OBJECT-TYPE    
  INTEGER remove(1), up(2), down(3)  

uxsStatusFSysLossStatus 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.38
&The status relating to the existence of the object. Valid values: unknown(1), up(2) or down(3).
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down(3)  

uxsStatusFSysRemove 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.39
&Removes the file system watcher from the agent.
OBJECT-TYPE    
  INTEGER none(1), remove(2)  

uxsStatusDiskGroup 1.3.6.1.4.1.791.2.9.4.5.2.7
OBJECT IDENTIFIER    

uxsStatusDiskCount 1.3.6.1.4.1.791.2.9.4.5.2.7.1
&The number of physical disks monitored by the agent.
OBJECT-TYPE    
  INTEGER  

uxsStatusDiskTable 1.3.6.1.4.1.791.2.9.4.5.2.7.2
&The table of monitored physical disks.
OBJECT-TYPE    
  SEQUENCE OF  
    UxsStatusDiskSequence

uxsStatusDiskEntry 1.3.6.1.4.1.791.2.9.4.5.2.7.2.1
&
OBJECT-TYPE    
  UxsStatusDiskSequence  

uxsStatusDiskName 1.3.6.1.4.1.791.2.9.4.5.2.7.2.1.1
&The device name of the physical disk that is being monitored.
OBJECT-TYPE    
  DisplayString  

uxsStatusDiskAggStatus 1.3.6.1.4.1.791.2.9.4.5.2.7.2.1.2
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold, down(5) - The resource is in a down state.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4), down(5)  

uxsStatusDiskTPutValue 1.3.6.1.4.1.791.2.9.4.5.2.7.2.1.3
&The kilobytes in blocks per second.
OBJECT-TYPE    
  INTEGER  

uxsStatusDiskTPutWarn 1.3.6.1.4.1.791.2.9.4.5.2.7.2.1.4
&The value for physical disk kilobytes per second throughput that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  INTEGER  

uxsStatusDiskTPutCrit 1.3.6.1.4.1.791.2.9.4.5.2.7.2.1.5
&The value for physical disk kilobytes per second throughput that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
OBJECT-TYPE    
  INTEGER  

uxsStatusDiskTPutMonitor 1.3.6.1.4.1.791.2.9.4.5.2.7.2.1.6
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusDiskTPutStatus 1.3.6.1.4.1.791.2.9.4.5.2.7.2.1.7
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusDiskLossAction 1.3.6.1.4.1.791.2.9.4.5.2.7.2.1.8
&Defines the action to take if the physical disk is removed from the machine. Valid values: remove(1), up(2) or down(3).
OBJECT-TYPE    
  INTEGER remove(1), up(2), down(3)  

uxsStatusDiskLossStatus 1.3.6.1.4.1.791.2.9.4.5.2.7.2.1.9
&The status relating to the existence of the object. Valid values: unknown(1), up(2) or down(3).
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down(3)  

uxsStatusDiskRemove 1.3.6.1.4.1.791.2.9.4.5.2.7.2.1.10
&Removes the physical disk watcher from the agent.
OBJECT-TYPE    
  INTEGER none(1), remove(2)  

uxsStatusFileGroup 1.3.6.1.4.1.791.2.9.4.5.2.8
OBJECT IDENTIFIER    

uxsStatusFileCount 1.3.6.1.4.1.791.2.9.4.5.2.8.1
&The number of file watchers configured for the agent.
OBJECT-TYPE    
  INTEGER  

uxsStatusFileTable 1.3.6.1.4.1.791.2.9.4.5.2.8.2
&The table of file watchers.
OBJECT-TYPE    
  SEQUENCE OF  
    UxsStatusFileSequence

uxsStatusFileEntry 1.3.6.1.4.1.791.2.9.4.5.2.8.2.1
&
OBJECT-TYPE    
  UxsStatusFileSequence  

uxsStatusFileName 1.3.6.1.4.1.791.2.9.4.5.2.8.2.1.1
&The name of the file being monitored.
OBJECT-TYPE    
  DisplayString  

uxsStatusFileDesc 1.3.6.1.4.1.791.2.9.4.5.2.8.2.1.2
&The description of the watcher provided when the watcher was created.
OBJECT-TYPE    
  DisplayString  

uxsStatusFileStatus 1.3.6.1.4.1.791.2.9.4.5.2.8.2.1.3
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold, down(5) - The resource is in a down state.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4), down(5)  

uxsStatusFileExist 1.3.6.1.4.1.791.2.9.4.5.2.8.2.1.4
&The test to perform for file existence. Valid values: should-exist(1) or should-not-exist(2).
OBJECT-TYPE    
  INTEGER should-exist(1), should-not-exist(2)  

uxsStatusFileExistMonitor 1.3.6.1.4.1.791.2.9.4.5.2.8.2.1.5
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1) or monitor(2).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), monitor(2)  

uxsStatusFileExistStatus 1.3.6.1.4.1.791.2.9.4.5.2.8.2.1.6
&The status of the files existence based on the uxsStatusFileExist attribute.
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down(3)  

uxsStatusFileModTime 1.3.6.1.4.1.791.2.9.4.5.2.8.2.1.7
&The files last modified date and time.
OBJECT-TYPE    
  DisplayString  

uxsStatusFileModTimeValue 1.3.6.1.4.1.791.2.9.4.5.2.8.2.1.8
&The time the agent compares with for the file timestamp status.
OBJECT-TYPE    
  DisplayString  

uxsStatusFileModTimeMonitor 1.3.6.1.4.1.791.2.9.4.5.2.8.2.1.9
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1) or monitor(2).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), monitor(2)  

uxsStatusFileModTimeStatus 1.3.6.1.4.1.791.2.9.4.5.2.8.2.1.10
&The status of the timestamp monitoring. unknown(1) - An error occurred collecting the data, up(2) - The timestamp is unchanged, down(3) - The timestamp has changed, reset(4) - Reset the uxsStatusFileModTimeValue to the files current timestamp and sets the status to OK.
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down(3), reset(4)  

uxsStatusFileSizeValue 1.3.6.1.4.1.791.2.9.4.5.2.8.2.1.11
&The size of the file in kilobytes.
OBJECT-TYPE    
  INTEGER  

uxsStatusFileSizeWarn 1.3.6.1.4.1.791.2.9.4.5.2.8.2.1.12
&The value for file size that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  INTEGER  

uxsStatusFileSizeCrit 1.3.6.1.4.1.791.2.9.4.5.2.8.2.1.13
&The value for file size that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
OBJECT-TYPE    
  INTEGER  

uxsStatusFileSizeMonitor 1.3.6.1.4.1.791.2.9.4.5.2.8.2.1.14
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusFileSizeStatus 1.3.6.1.4.1.791.2.9.4.5.2.8.2.1.15
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusFileSizeDValue 1.3.6.1.4.1.791.2.9.4.5.2.8.2.1.16
&The difference in file size since the last poll.
OBJECT-TYPE    
  INTEGER  

uxsStatusFileSizeDWarn 1.3.6.1.4.1.791.2.9.4.5.2.8.2.1.17
&The value for file size change that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  INTEGER  

uxsStatusFileSizeDCrit 1.3.6.1.4.1.791.2.9.4.5.2.8.2.1.18
&The value for file size change that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
OBJECT-TYPE    
  INTEGER  

uxsStatusFileSizeDMonitor 1.3.6.1.4.1.791.2.9.4.5.2.8.2.1.19
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusFileSizeDStatus 1.3.6.1.4.1.791.2.9.4.5.2.8.2.1.20
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusFileRemove 1.3.6.1.4.1.791.2.9.4.5.2.8.2.1.21
&Removes the file watcher from the agent.
OBJECT-TYPE    
  INTEGER none(1), remove(2)  

uxsStatusProcGroup 1.3.6.1.4.1.791.2.9.4.5.2.9
OBJECT IDENTIFIER    

uxsStatusProcCount 1.3.6.1.4.1.791.2.9.4.5.2.9.1
&The count of the number of process watchers.
OBJECT-TYPE    
  INTEGER  

uxsStatusProcTable 1.3.6.1.4.1.791.2.9.4.5.2.9.2
&The table of process watchers.
OBJECT-TYPE    
  SEQUENCE OF  
    UxsStatusProcSequence

uxsStatusProcEntry 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1
&
OBJECT-TYPE    
  UxsStatusProcSequence  

uxsStatusProcName 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.1
&The name of the process to monitor. Valid values are a string with an optional * at the end of the string for wild card matching.
OBJECT-TYPE    
  DisplayString  

uxsStatusProcPath 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.2
&The path of the process to match. Valid values are a string with an optional * at the end of the string for wild card matching.
OBJECT-TYPE    
  DisplayString  

uxsStatusProcArgs 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.3
&A section of the processes arguments to match.
OBJECT-TYPE    
  DisplayString  

uxsStatusProcUsers 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.4
&List of users to match. Details format of the string are documented in the online help.
OBJECT-TYPE    
  DisplayString  

uxsStatusProcStatus 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.5
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold, down(5) - The resource is in a down state.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4), down(5)  

uxsStatusProcPIDs 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.6
&The list of process IDs that caused the watcher to be in a bad state. This string is limited to 256 characters.
OBJECT-TYPE    
  DisplayString  

uxsStatusProcInstValue 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.7
&The current number of instances that match the key fields.
OBJECT-TYPE    
  INTEGER  

uxsStatusProcInstMin 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.8
&Minimum number of instances expected to match the key. Valid values: -1, 0 or greater.
OBJECT-TYPE    
  INTEGER  

uxsStatusProcInstMax 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.9
&Maximum number of instances expected to match the key. Valid values: -1, 0 or greater.
OBJECT-TYPE    
  INTEGER  

uxsStatusProcInstMonitor 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.10
&Defines the level of monitoring for process instances. Valid values: do-not-monitor(1) or monitor(2).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), monitor(2)  

uxsStatusProcInstStatus 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.11
&The current status of the resource: unknown(1) - An error occurred collecting the data, up(2) - The resource is within the monitoring parameters, down(3) - The resource is outside the monitoring parameters.
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down(3)  

uxsStatusProcChldValue 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.12
&The number of children of the process. See the documentation for additional information.
OBJECT-TYPE    
  INTEGER  

uxsStatusProcChldMin 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.13
&Minimum number of children (based on lowest for all instances). Valid values: -1, 0 or greater.
OBJECT-TYPE    
  INTEGER  

uxsStatusProcChldMax 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.14
&Maximum number of children (based on highest for all instances). Valid values: -1, 0 or greater.
OBJECT-TYPE    
  INTEGER  

uxsStatusProcChldMonitor 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.15
&Defines the level of monitoring for the number of children of the process. Valid values: do-not-monitor(1) or monitor(2).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), monitor(2)  

uxsStatusProcChldStatus 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.16
&The status of the number of children of the process: unknown(1) - An error occurred collecting the data, up(2) - The resource is within the monitoring parameters, down(3) - The resource is outside the monitoring parameters.
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down(3)  

uxsStatusProcSizeValue 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.17
&The size of the process in kilobytes. See the documentation for rules for which match's value is displayed.
OBJECT-TYPE    
  INTEGER  

uxsStatusProcSizeMin 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.18
&Minimum size of the process in kilobytes (based on lowest for all instances). Valid values: -1, 0 or greater.
OBJECT-TYPE    
  INTEGER  

uxsStatusProcSizeMax 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.19
&Maximum size of the process in kilobytes (based on highest for all instances). Valid values: -1, 0 or greater.
OBJECT-TYPE    
  INTEGER  

uxsStatusProcSizeMonitor 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.20
&Defines the level of monitoring for the size of the process. Valid values: do-not-monitor(1) or monitor(2).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), monitor(2)  

uxsStatusProcSizeStatus 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.21
&The status of the process size. unknown(1) - An error occurred collecting the data, up(2) - The resource is within the monitoring parameters, down(3) - The resource is outside the monitoring parameters.
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down(3)  

uxsStatusProcCPUValue 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.22
&The highest of all CPU (user and system time) usage since the last poll as a percentage.
OBJECT-TYPE    
  INTEGER  

uxsStatusProcCPUWarn 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.23
&The percentage of used CPU that is considered a warning level for that resource. Valid ranges: Greater than 0, less than 100, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  INTEGER  

uxsStatusProcCPUCrit 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.24
&The percentage of used CPU that is considered a critical level for that resource. Valid ranges: Greater than 1, less than or equal to 100, not less than or equal to the warning threshold.
OBJECT-TYPE    
  INTEGER  

uxsStatusProcCPUMonitor 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.25
&Defines the level of monitoring for used CPU. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusProcCPUStatus 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.26
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusProcRemove 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.27
&Removes the process watcher from the agent.
OBJECT-TYPE    
  INTEGER none(1), remove(2)  

uxsStatusPrnGroup 1.3.6.1.4.1.791.2.9.4.5.2.10
OBJECT IDENTIFIER    

uxsStatusPrnCount 1.3.6.1.4.1.791.2.9.4.5.2.10.1
&The number of configured printer queue watchers.
OBJECT-TYPE    
  INTEGER  

uxsStatusPrnTable 1.3.6.1.4.1.791.2.9.4.5.2.10.2
&The table of printer queue watchers.
OBJECT-TYPE    
  SEQUENCE OF  
    UxsStatusPrnSequence

uxsStatusPrnEntry 1.3.6.1.4.1.791.2.9.4.5.2.10.2.1
&
OBJECT-TYPE    
  UxsStatusPrnSequence  

uxsStatusPrnName 1.3.6.1.4.1.791.2.9.4.5.2.10.2.1.1
&The name of the printer queue being monitored.
OBJECT-TYPE    
  DisplayString  

uxsStatusPrnAggStatus 1.3.6.1.4.1.791.2.9.4.5.2.10.2.1.2
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold, down(5) - The resource is in a down state.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4), down(5)  

uxsStatusPrnDesc 1.3.6.1.4.1.791.2.9.4.5.2.10.2.1.3
&The description given to the printer queue watcher when it was added.
OBJECT-TYPE    
  DisplayString  

uxsStatusPrnItemsValue 1.3.6.1.4.1.791.2.9.4.5.2.10.2.1.4
&The number of printer queue items on the queue.
OBJECT-TYPE    
  INTEGER  

uxsStatusPrnItemsWarn 1.3.6.1.4.1.791.2.9.4.5.2.10.2.1.5
&The number of printer queue items that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  INTEGER  

uxsStatusPrnItemsCrit 1.3.6.1.4.1.791.2.9.4.5.2.10.2.1.6
&The number of printer queue items that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
OBJECT-TYPE    
  INTEGER  

uxsStatusPrnItemsMonitor 1.3.6.1.4.1.791.2.9.4.5.2.10.2.1.7
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusPrnItemsStatus 1.3.6.1.4.1.791.2.9.4.5.2.10.2.1.8
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusPrnLossAction 1.3.6.1.4.1.791.2.9.4.5.2.10.2.1.9
&Defines the action to take if the printer queue configuration is removed from the machine. Valid values: remove(1), up(2) or down(3).
OBJECT-TYPE    
  INTEGER remove(1), up(2), down(3)  

uxsStatusPrnLossStatus 1.3.6.1.4.1.791.2.9.4.5.2.10.2.1.10
&The status relating to the existence of the object. Valid values: unknown(1), up(2) or down(3).
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down(3)  

uxsStatusPrnRemove 1.3.6.1.4.1.791.2.9.4.5.2.10.2.1.11
&Removes the printer watcher from the agent.
OBJECT-TYPE    
  INTEGER none(1), remove(2)  

uxsStatusNetGroup 1.3.6.1.4.1.791.2.9.4.5.2.11
OBJECT IDENTIFIER    

uxsStatusNetTotalStatus 1.3.6.1.4.1.791.2.9.4.5.2.11.1
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusNetTotalIPktValue 1.3.6.1.4.1.791.2.9.4.5.2.11.2
&The total number of input packets per second for all interfaces since the last poll.
OBJECT-TYPE    
  INTEGER  

uxsStatusNetTotalIPktWarn 1.3.6.1.4.1.791.2.9.4.5.2.11.3
&The number of total input packets that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  INTEGER  

uxsStatusNetTotalIPktCrit 1.3.6.1.4.1.791.2.9.4.5.2.11.4
&The number of total input packets that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
OBJECT-TYPE    
  INTEGER  

uxsStatusNetTotalIPktMonitor 1.3.6.1.4.1.791.2.9.4.5.2.11.5
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusNetTotalIPktStatus 1.3.6.1.4.1.791.2.9.4.5.2.11.6
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusNetTotalIErrValue 1.3.6.1.4.1.791.2.9.4.5.2.11.7
&The total number of input errors per second for all interfaces since the last poll.
OBJECT-TYPE    
  INTEGER  

uxsStatusNetTotalIErrWarn 1.3.6.1.4.1.791.2.9.4.5.2.11.8
&The number of total input errors that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  INTEGER  

uxsStatusNetTotalIErrCrit 1.3.6.1.4.1.791.2.9.4.5.2.11.9
&The number of total input errors that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
OBJECT-TYPE    
  INTEGER  

uxsStatusNetTotalIErrMonitor 1.3.6.1.4.1.791.2.9.4.5.2.11.10
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusNetTotalIErrStatus 1.3.6.1.4.1.791.2.9.4.5.2.11.11
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusNetTotalOPktValue 1.3.6.1.4.1.791.2.9.4.5.2.11.12
&The total number of output packets per second for all interfaces since the last poll.
OBJECT-TYPE    
  INTEGER  

uxsStatusNetTotalOPktWarn 1.3.6.1.4.1.791.2.9.4.5.2.11.13
&The number of total output packets that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  INTEGER  

uxsStatusNetTotalOPktCrit 1.3.6.1.4.1.791.2.9.4.5.2.11.14
&The number of total output packets that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
OBJECT-TYPE    
  INTEGER  

uxsStatusNetTotalOPktMonitor 1.3.6.1.4.1.791.2.9.4.5.2.11.15
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusNetTotalOPktStatus 1.3.6.1.4.1.791.2.9.4.5.2.11.16
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusNetTotalOErrValue 1.3.6.1.4.1.791.2.9.4.5.2.11.17
&The total number of output errors per second for all interfaces since the last poll.
OBJECT-TYPE    
  INTEGER  

uxsStatusNetTotalOErrWarn 1.3.6.1.4.1.791.2.9.4.5.2.11.18
&The number of total output errors that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  INTEGER  

uxsStatusNetTotalOErrCrit 1.3.6.1.4.1.791.2.9.4.5.2.11.19
&The number of total output errors that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
OBJECT-TYPE    
  INTEGER  

uxsStatusNetTotalOErrMonitor 1.3.6.1.4.1.791.2.9.4.5.2.11.20
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusNetTotalOErrStatus 1.3.6.1.4.1.791.2.9.4.5.2.11.21
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusNetTotalCollValue 1.3.6.1.4.1.791.2.9.4.5.2.11.22
&The total number of collisions per second for all interfaces since the last poll.
OBJECT-TYPE    
  INTEGER  

uxsStatusNetTotalCollWarn 1.3.6.1.4.1.791.2.9.4.5.2.11.23
&The number of total collisions that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  INTEGER  

uxsStatusNetTotalCollCrit 1.3.6.1.4.1.791.2.9.4.5.2.11.24
&The number of total collisions that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
OBJECT-TYPE    
  INTEGER  

uxsStatusNetTotalCollMonitor 1.3.6.1.4.1.791.2.9.4.5.2.11.25
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusNetTotalCollStatus 1.3.6.1.4.1.791.2.9.4.5.2.11.26
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusNetCount 1.3.6.1.4.1.791.2.9.4.5.2.11.27
&The number of network interfaces in the network table.
OBJECT-TYPE    
  INTEGER  

uxsStatusNetTable 1.3.6.1.4.1.791.2.9.4.5.2.11.28
&The network table containing the network interfaces.
OBJECT-TYPE    
  SEQUENCE OF  
    UxsStatusNetSequence

uxsStatusNetEntry 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1
&
OBJECT-TYPE    
  UxsStatusNetSequence  

uxsStatusNetName 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.1
&The name by which the network interface is known.
OBJECT-TYPE    
  DisplayString  

uxsStatusNetIP 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.2
&The IP address of the interface.
OBJECT-TYPE    
  DisplayString  

uxsStatusNetStatus 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.3
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusNetIPktValue 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.4
&The number of input packets per second for the interface since the last poll.
OBJECT-TYPE    
  INTEGER  

uxsStatusNetIPktWarn 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.5
&The number of input packets that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  INTEGER  

uxsStatusNetIPktCrit 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.6
&The number of input packets that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
OBJECT-TYPE    
  INTEGER  

uxsStatusNetIPktMonitor 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.7
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusNetIPktStatus 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.8
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusNetIErrValue 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.9
&The number of input errors per second for the interface since the last poll.
OBJECT-TYPE    
  INTEGER  

uxsStatusNetIErrWarn 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.10
&The number of input errors that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  INTEGER  

uxsStatusNetIErrCrit 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.11
&The number of input errors that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
OBJECT-TYPE    
  INTEGER  

uxsStatusNetIErrMonitor 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.12
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusNetIErrStatus 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.13
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusNetOPktValue 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.14
&The number of output packets per second for the interface since the last poll.
OBJECT-TYPE    
  INTEGER  

uxsStatusNetOPktWarn 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.15
&The number of output packets that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  INTEGER  

uxsStatusNetOPktCrit 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.16
&The number of output packets that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
OBJECT-TYPE    
  INTEGER  

uxsStatusNetOPktMonitor 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.17
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusNetOPktStatus 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.18
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusNetOErrValue 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.19
&The number of output errors per second for the interface since the last poll.
OBJECT-TYPE    
  INTEGER  

uxsStatusNetOErrWarn 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.20
&The number of output errors that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  INTEGER  

uxsStatusNetOErrCrit 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.21
&The number of output errors that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
OBJECT-TYPE    
  INTEGER  

uxsStatusNetOErrMonitor 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.22
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusNetOErrStatus 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.23
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusNetCollValue 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.24
&The number of collisions per second for the interface since the last poll.
OBJECT-TYPE    
  INTEGER  

uxsStatusNetCollWarn 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.25
&The number of collisions that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  INTEGER  

uxsStatusNetCollCrit 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.26
&The number of collisions that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
OBJECT-TYPE    
  INTEGER  

uxsStatusNetCollMonitor 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.27
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusNetCollStatus 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.28
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusNetLossAction 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.29
&Defines the action to take if the network interface is removed from the machine. Valid values: remove(1), up(2) or down(3).
OBJECT-TYPE    
  INTEGER remove(1), up(2), down(3)  

uxsStatusNetLossStatus 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.30
&The status relating to the existence of the object. Valid values: unknown(1), up(2) or down(3).
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down(3)  

uxsStatusIPCGroup 1.3.6.1.4.1.791.2.9.4.5.2.12
OBJECT IDENTIFIER    

uxsStatusIPCSHMIDSAvailable 1.3.6.1.4.1.791.2.9.4.5.2.12.1
&The number of configured shared memory IDs.
OBJECT-TYPE    
  INTEGER  

uxsStatusIPCSHMIDSValue 1.3.6.1.4.1.791.2.9.4.5.2.12.2
&The number of shared memory IDs in use.
OBJECT-TYPE    
  INTEGER  

uxsStatusIPCSHMIDSLagValue 1.3.6.1.4.1.791.2.9.4.5.2.12.3
&The number of times that the threshold has been reached.
OBJECT-TYPE    
  INTEGER  

uxsStatusIPCSHMIDSLag 1.3.6.1.4.1.791.2.9.4.5.2.12.4
&The number of times that the threshold has to be reached before the state changes. Valid range: Greater than 0.
OBJECT-TYPE    
  INTEGER  

uxsStatusIPCSHMIDSWarnValue 1.3.6.1.4.1.791.2.9.4.5.2.12.5
&The absolute value used for threshold calculation based on the configured warning value.
OBJECT-TYPE    
  DisplayString  

uxsStatusIPCSHMIDSCritValue 1.3.6.1.4.1.791.2.9.4.5.2.12.6
&The absolute value used for threshold calculation based on the configured critical value.
OBJECT-TYPE    
  DisplayString  

uxsStatusIPCSHMIDSWarn 1.3.6.1.4.1.791.2.9.4.5.2.12.7
&The value for used IDs, either as a percentage or absolute value, that is considered a warning level for that resource. Valid ranges: Greater than 0, less than total IDs - 1, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  DisplayString  

uxsStatusIPCSHMIDSCrit 1.3.6.1.4.1.791.2.9.4.5.2.12.8
&The value for used IDs, either as a percentage or absolute value, that is considered a critical level for that resource. Valid ranges: Greater than 1, less than total IDs, not less than or equal to the warning threshold.
OBJECT-TYPE    
  DisplayString  

uxsStatusIPCSHMIDSMonitor 1.3.6.1.4.1.791.2.9.4.5.2.12.9
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusIPCSHMIDSStatus 1.3.6.1.4.1.791.2.9.4.5.2.12.10
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusIPCSEMIDSAvailable 1.3.6.1.4.1.791.2.9.4.5.2.12.11
&The number of configured semaphore IDs.
OBJECT-TYPE    
  INTEGER  

uxsStatusIPCSEMIDSValue 1.3.6.1.4.1.791.2.9.4.5.2.12.12
&The number of semaphore IDs in use.
OBJECT-TYPE    
  INTEGER  

uxsStatusIPCSEMIDSLagValue 1.3.6.1.4.1.791.2.9.4.5.2.12.13
&The number of times that the threshold has been reached.
OBJECT-TYPE    
  INTEGER  

uxsStatusIPCSEMIDSLag 1.3.6.1.4.1.791.2.9.4.5.2.12.14
&The number of times that the threshold has to be reached before the state changes. Valid range: Greater than 0.
OBJECT-TYPE    
  INTEGER  

uxsStatusIPCSEMIDSWarnValue 1.3.6.1.4.1.791.2.9.4.5.2.12.15
&The absolute value used for threshold calculation based on the configured warning value.
OBJECT-TYPE    
  DisplayString  

uxsStatusIPCSEMIDSCritValue 1.3.6.1.4.1.791.2.9.4.5.2.12.16
&The absolute value used for threshold calculation based on the configured critical value.
OBJECT-TYPE    
  DisplayString  

uxsStatusIPCSEMIDSWarn 1.3.6.1.4.1.791.2.9.4.5.2.12.17
&The value for used IDs, either as a percentage or absolute value, that is considered a warning level for that resource. Valid ranges: Greater than 0, less than total IDs - 1, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  DisplayString  

uxsStatusIPCSEMIDSCrit 1.3.6.1.4.1.791.2.9.4.5.2.12.18
&The value for used IDs, either as a percentage or absolute value, that is considered a critical level for that resource. Valid ranges: Greater than 1, less than total IDs, not less than or equal to the warning threshold.
OBJECT-TYPE    
  DisplayString  

uxsStatusIPCSEMIDSMonitor 1.3.6.1.4.1.791.2.9.4.5.2.12.19
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusIPCSEMIDSStatus 1.3.6.1.4.1.791.2.9.4.5.2.12.20
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusIPCMQIDSAvailable 1.3.6.1.4.1.791.2.9.4.5.2.12.21
&The number of configured message queue IDs.
OBJECT-TYPE    
  INTEGER  

uxsStatusIPCMQIDSValue 1.3.6.1.4.1.791.2.9.4.5.2.12.22
&The number of message queue IDs in use.
OBJECT-TYPE    
  INTEGER  

uxsStatusIPCMQIDSLagValue 1.3.6.1.4.1.791.2.9.4.5.2.12.23
&The number of times that the threshold has been reached.
OBJECT-TYPE    
  INTEGER  

uxsStatusIPCMQIDSLag 1.3.6.1.4.1.791.2.9.4.5.2.12.24
&The number of times that the threshold has to be reached before the state changes. Valid range: Greater than 0.
OBJECT-TYPE    
  INTEGER  

uxsStatusIPCMQIDSWarnValue 1.3.6.1.4.1.791.2.9.4.5.2.12.25
&The absolute value used for threshold calculation based on the configured warning value.
OBJECT-TYPE    
  DisplayString  

uxsStatusIPCMQIDSCritValue 1.3.6.1.4.1.791.2.9.4.5.2.12.26
&The absolute value used for threshold calculation based on the configured critical value.
OBJECT-TYPE    
  DisplayString  

uxsStatusIPCMQIDSWarn 1.3.6.1.4.1.791.2.9.4.5.2.12.27
&The value for used IDs, either as a percentage or absolute value, that is considered a warning level for that resource. Valid ranges: Greater than 0, less than total IDs - 1, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  DisplayString  

uxsStatusIPCMQIDSCrit 1.3.6.1.4.1.791.2.9.4.5.2.12.28
&The value for used IDs, either as a percentage or absolute value, that is considered a critical level for that resource. Valid ranges: Greater than 1, less than total IDs, not less than or equal to the warning threshold.
OBJECT-TYPE    
  DisplayString  

uxsStatusIPCMQIDSMonitor 1.3.6.1.4.1.791.2.9.4.5.2.12.29
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusIPCMQIDSStatus 1.3.6.1.4.1.791.2.9.4.5.2.12.30
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusIPCMQMonitor 1.3.6.1.4.1.791.2.9.4.5.2.12.31
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1) or monitor(2).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), monitor(2)  

uxsStatusIPCMQCount 1.3.6.1.4.1.791.2.9.4.5.2.12.32
&The number of monitored message queues.
OBJECT-TYPE    
  INTEGER  

uxsStatusIPCMQTable 1.3.6.1.4.1.791.2.9.4.5.2.12.33
&The table of monitored message queues.
OBJECT-TYPE    
  SEQUENCE OF  
    UxsStatusIPCMQSequence

uxsStatusIPCMQEntry 1.3.6.1.4.1.791.2.9.4.5.2.12.33.1
&
OBJECT-TYPE    
  UxsStatusIPCMQSequence  

uxsStatusIPCMQID 1.3.6.1.4.1.791.2.9.4.5.2.12.33.1.1
&The message queue ID.
OBJECT-TYPE    
  DisplayString  

uxsStatusIPCMQKey 1.3.6.1.4.1.791.2.9.4.5.2.12.33.1.2
&The message queue key.
OBJECT-TYPE    
  DisplayString  

uxsStatusIPCMQMode 1.3.6.1.4.1.791.2.9.4.5.2.12.33.1.3
&The message queue access rights.
OBJECT-TYPE    
  DisplayString  

uxsStatusIPCMQOwner 1.3.6.1.4.1.791.2.9.4.5.2.12.33.1.4
&The message queue owner.
OBJECT-TYPE    
  DisplayString  

uxsStatusIPCMQGroup 1.3.6.1.4.1.791.2.9.4.5.2.12.33.1.5
&The message queue group.
OBJECT-TYPE    
  DisplayString  

uxsStatusIPCMQBytesAvailable 1.3.6.1.4.1.791.2.9.4.5.2.12.33.1.6
&The number of bytes available for messages.
OBJECT-TYPE    
  INTEGER  

uxsStatusIPCMQBytesValue 1.3.6.1.4.1.791.2.9.4.5.2.12.33.1.7
&The bytes used in the message queue.
OBJECT-TYPE    
  INTEGER  

uxsStatusIPCMQBytesLagValue 1.3.6.1.4.1.791.2.9.4.5.2.12.33.1.8
&The number of times that the threshold has been reached.
OBJECT-TYPE    
  INTEGER  

uxsStatusIPCMQBytesLag 1.3.6.1.4.1.791.2.9.4.5.2.12.33.1.9
&The number of times that the threshold has to be reached before the state changes. Valid range: Greater than 0.
OBJECT-TYPE    
  INTEGER  

uxsStatusIPCMQBytesWarnValue 1.3.6.1.4.1.791.2.9.4.5.2.12.33.1.10
&The absolute value used for threshold calculation based on the configured warning value.
OBJECT-TYPE    
  DisplayString  

uxsStatusIPCMQBytesCritValue 1.3.6.1.4.1.791.2.9.4.5.2.12.33.1.12
&The absolute value used for threshold calculation based on the configured critical value.
OBJECT-TYPE    
  DisplayString  

uxsStatusIPCMQBytesWarn 1.3.6.1.4.1.791.2.9.4.5.2.12.33.1.13
&The value for used message queue bytes, either as a percentage or in kilobytes, that is considered a warning level for that resource. Valid ranges: Greater than 0, less than total queue size - 1, not greater than or equal to the critical threshold.
OBJECT-TYPE    
  DisplayString  

uxsStatusIPCMQBytesCrit 1.3.6.1.4.1.791.2.9.4.5.2.12.33.1.14
&The value for used message queue bytes, either as a percentage or in kilobytes, that is considered a critical level for that resource. Valid ranges: Greater than 1, less than total Queue size, not less than or equal to the warning threshold.
OBJECT-TYPE    
  DisplayString  

uxsStatusIPCMQBytesMonitor 1.3.6.1.4.1.791.2.9.4.5.2.12.33.1.15
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusIPCMQBytesStatus 1.3.6.1.4.1.791.2.9.4.5.2.12.33.1.16
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsAvailableGroup 1.3.6.1.4.1.791.2.9.4.5.3
OBJECT IDENTIFIER    

uxsAvailFSysRefresh 1.3.6.1.4.1.791.2.9.4.5.3.1
&Set this value to refresh(2) to check the operating system for recently configured file systems. The user can not set the value to none(1).
OBJECT-TYPE    
  INTEGER none(1), refresh(2)  

uxsAvailFSysTable 1.3.6.1.4.1.791.2.9.4.5.3.2
&The table containing a list of file systems that are currently known to the agent and are available for monitoring.
OBJECT-TYPE    
  SEQUENCE OF  
    UxsAvailFSysSequence

uxsAvailFSysEntry 1.3.6.1.4.1.791.2.9.4.5.3.2.1
&
OBJECT-TYPE    
  UxsAvailFSysSequence  

uxsAvailFSysName 1.3.6.1.4.1.791.2.9.4.5.3.2.1.1
&The file system name.
OBJECT-TYPE    
  DisplayString  

uxsAvailFSysRelatedTo 1.3.6.1.4.1.791.2.9.4.5.3.2.1.2
&The device to which the file system is related.
OBJECT-TYPE    
  DisplayString  

uxsAvailFSysType 1.3.6.1.4.1.791.2.9.4.5.3.2.1.3
&The type of the file system. Values are platform dependent.
OBJECT-TYPE    
  DisplayString  

uxsAvailDiskRefresh 1.3.6.1.4.1.791.2.9.4.5.3.3
&Set this value to refresh(2) to check the operating system for recently configured physical disks. The user can not set the value to none(1).
OBJECT-TYPE    
  INTEGER none(1), refresh(2)  

uxsAvailDiskTable 1.3.6.1.4.1.791.2.9.4.5.3.4
&The table containing a list of physical disks that are currently known to the agent and are available for monitoring.
OBJECT-TYPE    
  SEQUENCE OF  
    UxsAvailDiskSequence

uxsAvailDiskEntry 1.3.6.1.4.1.791.2.9.4.5.3.4.1
&
OBJECT-TYPE    
  UxsAvailDiskSequence  

uxsAvailDiskName 1.3.6.1.4.1.791.2.9.4.5.3.4.1.1
&The device name.
OBJECT-TYPE    
  DisplayString  

uxsAvailPrnRefresh 1.3.6.1.4.1.791.2.9.4.5.3.5
&Set this value to refresh(2) to check the operating system for recently configured printers or printer queues. The user can not set the value to none(1).
OBJECT-TYPE    
  INTEGER none(1), refresh(2)  

uxsAvailPrnTable 1.3.6.1.4.1.791.2.9.4.5.3.6
&The table containing a list of printers and printer queues that are currently known to the agent and are available for monitoring.
OBJECT-TYPE    
  SEQUENCE OF  
    UxsAvailPrnSequence

uxsAvailPrnEntry 1.3.6.1.4.1.791.2.9.4.5.3.6.1
&
OBJECT-TYPE    
  UxsAvailPrnSequence  

uxsAvailPrnName 1.3.6.1.4.1.791.2.9.4.5.3.6.1.1
&The local printer queue name.
OBJECT-TYPE    
  DisplayString  

uxsPollGroup 1.3.6.1.4.1.791.2.9.4.5.4
OBJECT IDENTIFIER    

uxsPollNetGroup 1.3.6.1.4.1.791.2.9.4.5.4.1
OBJECT IDENTIFIER    

uxsPollNetTable 1.3.6.1.4.1.791.2.9.4.5.4.1.1
&The table of raw network statistics.
OBJECT-TYPE    
  SEQUENCE OF  
    UxsPollNetSequence

uxsPollNetEntry 1.3.6.1.4.1.791.2.9.4.5.4.1.1.1
&
OBJECT-TYPE    
  UxsPollNetSequence  

uxsPollNetName 1.3.6.1.4.1.791.2.9.4.5.4.1.1.1.1
&The name by which the network interface is known.
OBJECT-TYPE    
  DisplayString  

uxsPollNetIP 1.3.6.1.4.1.791.2.9.4.5.4.1.1.1.2
&The IP address of the interface.
OBJECT-TYPE    
  DisplayString  

uxsPollNetIPktValue 1.3.6.1.4.1.791.2.9.4.5.4.1.1.1.3
&The number of input packets since the machine started.
OBJECT-TYPE    
  INTEGER  

uxsPollNetIErrValue 1.3.6.1.4.1.791.2.9.4.5.4.1.1.1.4
&The number of input errors since the machine started.
OBJECT-TYPE    
  INTEGER  

uxsPollNetOPktValue 1.3.6.1.4.1.791.2.9.4.5.4.1.1.1.5
&The number of output packets since the machine started.
OBJECT-TYPE    
  INTEGER  

uxsPollNetOErrValue 1.3.6.1.4.1.791.2.9.4.5.4.1.1.1.6
&The number of output errors since the machine started.
OBJECT-TYPE    
  INTEGER  

uxsPollNetCollValue 1.3.6.1.4.1.791.2.9.4.5.4.1.1.1.7
&The number of collisions since the machine started.
OBJECT-TYPE    
  INTEGER  

uxsPollIPCGroup 1.3.6.1.4.1.791.2.9.4.5.4.2
OBJECT IDENTIFIER    

uxsPollIPCSHMMonitor 1.3.6.1.4.1.791.2.9.4.5.4.2.1
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1) or monitor(2).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), monitor(2)  

uxsPollIPCSHMCount 1.3.6.1.4.1.791.2.9.4.5.4.2.2
&The number of shared memory segments in the table.
OBJECT-TYPE    
  INTEGER  

uxsPollIPCSHMTable 1.3.6.1.4.1.791.2.9.4.5.4.2.3
&The table of shared memory segments.
OBJECT-TYPE    
  SEQUENCE OF  
    UxsPollIPCSHMSequence

uxsPollIPCSHMEntry 1.3.6.1.4.1.791.2.9.4.5.4.2.3.1
&
OBJECT-TYPE    
  UxsPollIPCSHMSequence  

uxsPollIPCSHMID 1.3.6.1.4.1.791.2.9.4.5.4.2.3.1.1
&The shared memory ID.
OBJECT-TYPE    
  DisplayString  

uxsPollIPCSHMKey 1.3.6.1.4.1.791.2.9.4.5.4.2.3.1.2
&The shared memory key.
OBJECT-TYPE    
  DisplayString  

uxsPollIPCSHMMode 1.3.6.1.4.1.791.2.9.4.5.4.2.3.1.3
&The shared memory access rights.
OBJECT-TYPE    
  DisplayString  

uxsPollIPCSHMOwner 1.3.6.1.4.1.791.2.9.4.5.4.2.3.1.4
&The shared memory segment owner.
OBJECT-TYPE    
  DisplayString  

uxsPollIPCSHMGroup 1.3.6.1.4.1.791.2.9.4.5.4.2.3.1.5
&The shared memory segments group.
OBJECT-TYPE    
  DisplayString  

uxsPollIPCSHMMaxSize 1.3.6.1.4.1.791.2.9.4.5.4.2.3.1.6
&The shared memory segment size.
OBJECT-TYPE    
  INTEGER  

uxsPollIPCSHMAttached 1.3.6.1.4.1.791.2.9.4.5.4.2.3.1.7
&The number of processes using the shared memory segment.
OBJECT-TYPE    
  INTEGER  

uxsPollIPCSEMMonitor 1.3.6.1.4.1.791.2.9.4.5.4.2.4
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1) or monitor(2).
OBJECT-TYPE    
  INTEGER do-not-monitor(1), monitor(2)  

uxsPollIPCSEMCount 1.3.6.1.4.1.791.2.9.4.5.4.2.5
&The number of semaphores in the table.
OBJECT-TYPE    
  INTEGER  

uxsPollIPCSEMTable 1.3.6.1.4.1.791.2.9.4.5.4.2.6
&The table of semaphore information.
OBJECT-TYPE    
  SEQUENCE OF  
    UxsPollIPCSEMSequence

uxsPollIPCSEMEntry 1.3.6.1.4.1.791.2.9.4.5.4.2.6.1
&
OBJECT-TYPE    
  UxsPollIPCSEMSequence  

uxsPollIPCSEMID 1.3.6.1.4.1.791.2.9.4.5.4.2.6.1.1
&The semaphore ID.
OBJECT-TYPE    
  DisplayString  

uxsPollIPCSEMKey 1.3.6.1.4.1.791.2.9.4.5.4.2.6.1.2
&The semaphore key.
OBJECT-TYPE    
  DisplayString  

uxsPollIPCSEMMode 1.3.6.1.4.1.791.2.9.4.5.4.2.6.1.3
&The semaphore access rights.
OBJECT-TYPE    
  DisplayString  

uxsPollIPCSEMOwner 1.3.6.1.4.1.791.2.9.4.5.4.2.6.1.4
&The semaphore owner.
OBJECT-TYPE    
  DisplayString  

uxsPollIPCSEMGroup 1.3.6.1.4.1.791.2.9.4.5.4.2.6.1.5
&The semaphore group.
OBJECT-TYPE    
  DisplayString  

uxsPollIPCSEMMaxNums 1.3.6.1.4.1.791.2.9.4.5.4.2.6.1.6
&The number of semaphores.
OBJECT-TYPE    
  INTEGER  

uxsCPUTotalUnknown 1.3.6.1.4.1.791.2.9.4.5.10000
&
TRAP-TYPE    

uxsCPUTotalOK 1.3.6.1.4.1.791.2.9.4.5.10001
&
TRAP-TYPE    

uxsCPUTotalWarning 1.3.6.1.4.1.791.2.9.4.5.10002
&
TRAP-TYPE    

uxsCPUTotalCritical 1.3.6.1.4.1.791.2.9.4.5.10003
&
TRAP-TYPE    

uxsCPUUnknown 1.3.6.1.4.1.791.2.9.4.5.10990
&
TRAP-TYPE    

uxsCPUOK 1.3.6.1.4.1.791.2.9.4.5.10991
&
TRAP-TYPE    

uxsCPUWarning 1.3.6.1.4.1.791.2.9.4.5.10992
&
TRAP-TYPE    

uxsCPUCritical 1.3.6.1.4.1.791.2.9.4.5.10993
&
TRAP-TYPE    

uxsCPUDown 1.3.6.1.4.1.791.2.9.4.5.10995
&
TRAP-TYPE    

uxsCPUAdded 1.3.6.1.4.1.791.2.9.4.5.10996
&
TRAP-TYPE    

uxsCPUDeleted 1.3.6.1.4.1.791.2.9.4.5.10997
&
TRAP-TYPE    

uxsLoad1Unknown 1.3.6.1.4.1.791.2.9.4.5.11010
&
TRAP-TYPE    

uxsLoad1OK 1.3.6.1.4.1.791.2.9.4.5.11011
&
TRAP-TYPE    

uxsLoad1Warning 1.3.6.1.4.1.791.2.9.4.5.11012
&
TRAP-TYPE    

uxsLoad1Critical 1.3.6.1.4.1.791.2.9.4.5.11013
&
TRAP-TYPE    

uxsLoad5Unknown 1.3.6.1.4.1.791.2.9.4.5.11050
&
TRAP-TYPE    

uxsLoad5OK 1.3.6.1.4.1.791.2.9.4.5.11051
&
TRAP-TYPE    

uxsLoad5Warning 1.3.6.1.4.1.791.2.9.4.5.11052
&
TRAP-TYPE    

uxsLoad5Critical 1.3.6.1.4.1.791.2.9.4.5.11053
&
TRAP-TYPE    

uxsLoad15Unknown 1.3.6.1.4.1.791.2.9.4.5.11150
&
TRAP-TYPE    

uxsLoad15OK 1.3.6.1.4.1.791.2.9.4.5.11151
&
TRAP-TYPE    

uxsLoad15Warning 1.3.6.1.4.1.791.2.9.4.5.11152
&
TRAP-TYPE    

uxsLoad15Critical 1.3.6.1.4.1.791.2.9.4.5.11153
&
TRAP-TYPE    

uxsMemUnknown 1.3.6.1.4.1.791.2.9.4.5.12010
&
TRAP-TYPE    

uxsMemOK 1.3.6.1.4.1.791.2.9.4.5.12011
&
TRAP-TYPE    

uxsMemWarning 1.3.6.1.4.1.791.2.9.4.5.12012
&
TRAP-TYPE    

uxsMemCritical 1.3.6.1.4.1.791.2.9.4.5.12013
&
TRAP-TYPE    

uxsSwapTotalUnknown 1.3.6.1.4.1.791.2.9.4.5.13000
&
TRAP-TYPE    

uxsSwapTotalOK 1.3.6.1.4.1.791.2.9.4.5.13001
&
TRAP-TYPE    

uxsSwapTotalWarning 1.3.6.1.4.1.791.2.9.4.5.13002
&
TRAP-TYPE    

uxsSwapTotalCritical 1.3.6.1.4.1.791.2.9.4.5.13003
&
TRAP-TYPE    

uxsSwapUnknown 1.3.6.1.4.1.791.2.9.4.5.13990
&
TRAP-TYPE    

uxsSwapOK 1.3.6.1.4.1.791.2.9.4.5.13991
&
TRAP-TYPE    

uxsSwapWarning 1.3.6.1.4.1.791.2.9.4.5.13992
&
TRAP-TYPE    

uxsSwapCritical 1.3.6.1.4.1.791.2.9.4.5.13993
&
TRAP-TYPE    

uxsSwapDown 1.3.6.1.4.1.791.2.9.4.5.13995
&
TRAP-TYPE    

uxsSwapAdded 1.3.6.1.4.1.791.2.9.4.5.13996
&
TRAP-TYPE    

uxsSwapDeleted 1.3.6.1.4.1.791.2.9.4.5.13997
&
TRAP-TYPE    

uxsFSysUnknown 1.3.6.1.4.1.791.2.9.4.5.14980
&
TRAP-TYPE    

uxsFSysOK 1.3.6.1.4.1.791.2.9.4.5.14981
&
TRAP-TYPE    

uxsFSysWarning 1.3.6.1.4.1.791.2.9.4.5.14982
&
TRAP-TYPE    

uxsFSysCritical 1.3.6.1.4.1.791.2.9.4.5.14983
&
TRAP-TYPE    

uxsFSysDown 1.3.6.1.4.1.791.2.9.4.5.14985
&
TRAP-TYPE    

uxsFSysAdded 1.3.6.1.4.1.791.2.9.4.5.14986
&
TRAP-TYPE    

uxsFSysDeleted 1.3.6.1.4.1.791.2.9.4.5.14987
&
TRAP-TYPE    

uxsDiskUnknown 1.3.6.1.4.1.791.2.9.4.5.15980
&
TRAP-TYPE    

uxsDiskOK 1.3.6.1.4.1.791.2.9.4.5.15981
&
TRAP-TYPE    

uxsDiskWarning 1.3.6.1.4.1.791.2.9.4.5.15982
&
TRAP-TYPE    

uxsDiskCritical 1.3.6.1.4.1.791.2.9.4.5.15983
&
TRAP-TYPE    

uxsDiskDown 1.3.6.1.4.1.791.2.9.4.5.15985
&
TRAP-TYPE    

uxsDiskAdded 1.3.6.1.4.1.791.2.9.4.5.15986
&
TRAP-TYPE    

uxsDiskDeleted 1.3.6.1.4.1.791.2.9.4.5.15987
&
TRAP-TYPE    

uxsProcUnknown 1.3.6.1.4.1.791.2.9.4.5.16980
&
TRAP-TYPE    

uxsProcOK 1.3.6.1.4.1.791.2.9.4.5.16981
&
TRAP-TYPE    

uxsProcWarning 1.3.6.1.4.1.791.2.9.4.5.16982
&
TRAP-TYPE    

uxsProcCritical 1.3.6.1.4.1.791.2.9.4.5.16983
&
TRAP-TYPE    

uxsProcDown 1.3.6.1.4.1.791.2.9.4.5.16985
&
TRAP-TYPE    

uxsProcAdded 1.3.6.1.4.1.791.2.9.4.5.16986
&
TRAP-TYPE    

uxsProcDeleted 1.3.6.1.4.1.791.2.9.4.5.16987
&
TRAP-TYPE    

uxsFilesUnknown 1.3.6.1.4.1.791.2.9.4.5.17980
&
TRAP-TYPE    

uxsFilesOK 1.3.6.1.4.1.791.2.9.4.5.17981
&
TRAP-TYPE    

uxsFilesWarning 1.3.6.1.4.1.791.2.9.4.5.17982
&
TRAP-TYPE    

uxsFilesCritical 1.3.6.1.4.1.791.2.9.4.5.17983
&
TRAP-TYPE    

uxsFilesDown 1.3.6.1.4.1.791.2.9.4.5.17985
&
TRAP-TYPE    

uxsFilesAdded 1.3.6.1.4.1.791.2.9.4.5.17986
&
TRAP-TYPE    

uxsFilesDeleted 1.3.6.1.4.1.791.2.9.4.5.17987
&
TRAP-TYPE    

uxsPrnUnknown 1.3.6.1.4.1.791.2.9.4.5.18980
&
TRAP-TYPE    

uxsPrnOK 1.3.6.1.4.1.791.2.9.4.5.18981
&
TRAP-TYPE    

uxsPrnWarning 1.3.6.1.4.1.791.2.9.4.5.18982
&
TRAP-TYPE    

uxsPrnCritical 1.3.6.1.4.1.791.2.9.4.5.18983
&
TRAP-TYPE    

uxsPrnDown 1.3.6.1.4.1.791.2.9.4.5.18985
&
TRAP-TYPE    

uxsPrnAdded 1.3.6.1.4.1.791.2.9.4.5.18986
&
TRAP-TYPE    

uxsPrnDeleted 1.3.6.1.4.1.791.2.9.4.5.18987
&
TRAP-TYPE    

uxsNetTotalUnknown 1.3.6.1.4.1.791.2.9.4.5.19000
&
TRAP-TYPE    

uxsNetTotalOK 1.3.6.1.4.1.791.2.9.4.5.19001
&
TRAP-TYPE    

uxsNetTotalWarning 1.3.6.1.4.1.791.2.9.4.5.19002
&
TRAP-TYPE    

uxsNetTotalCritical 1.3.6.1.4.1.791.2.9.4.5.19003
&
TRAP-TYPE    

uxsNetUnknown 1.3.6.1.4.1.791.2.9.4.5.19990
&
TRAP-TYPE    

uxsNetOK 1.3.6.1.4.1.791.2.9.4.5.19991
&
TRAP-TYPE    

uxsNetWarning 1.3.6.1.4.1.791.2.9.4.5.19992
&
TRAP-TYPE    

uxsNetCritical 1.3.6.1.4.1.791.2.9.4.5.19993
&
TRAP-TYPE    

uxsNetDown 1.3.6.1.4.1.791.2.9.4.5.19995
&
TRAP-TYPE    

uxsNetAdded 1.3.6.1.4.1.791.2.9.4.5.19996
&
TRAP-TYPE    

uxsNetDeleted 1.3.6.1.4.1.791.2.9.4.5.19997
&
TRAP-TYPE    

uxsIPCSHMUnknown 1.3.6.1.4.1.791.2.9.4.5.20010
&
TRAP-TYPE    

uxsIPCSHMOK 1.3.6.1.4.1.791.2.9.4.5.20011
&
TRAP-TYPE    

uxsIPCSHMWarning 1.3.6.1.4.1.791.2.9.4.5.20012
&
TRAP-TYPE    

uxsIPCSHMCritical 1.3.6.1.4.1.791.2.9.4.5.20013
&
TRAP-TYPE    

uxsIPCSEMUnknown 1.3.6.1.4.1.791.2.9.4.5.20020
&
TRAP-TYPE    

uxsIPCSEMOK 1.3.6.1.4.1.791.2.9.4.5.20021
&
TRAP-TYPE    

uxsIPCSEMWarning 1.3.6.1.4.1.791.2.9.4.5.20022
&
TRAP-TYPE    

uxsIPCSEMCritical 1.3.6.1.4.1.791.2.9.4.5.20023
&
TRAP-TYPE    

uxsIPCMQUnknown 1.3.6.1.4.1.791.2.9.4.5.20030
&
TRAP-TYPE    

uxsIPCMQOK 1.3.6.1.4.1.791.2.9.4.5.20031
&
TRAP-TYPE    

uxsIPCMQWarning 1.3.6.1.4.1.791.2.9.4.5.20032
&
TRAP-TYPE    

uxsIPCMQCritical 1.3.6.1.4.1.791.2.9.4.5.20033
&
TRAP-TYPE    

uxsIPCMQSUnknown 1.3.6.1.4.1.791.2.9.4.5.20980
&
TRAP-TYPE    

uxsIPCMQSOK 1.3.6.1.4.1.791.2.9.4.5.20981
&
TRAP-TYPE    

uxsIPCMQSWarning 1.3.6.1.4.1.791.2.9.4.5.20982
&
TRAP-TYPE    

uxsIPCMQSCritical 1.3.6.1.4.1.791.2.9.4.5.20983
&
TRAP-TYPE    

uxsIPCMQSDown 1.3.6.1.4.1.791.2.9.4.5.20985
&
TRAP-TYPE    

uxsIPCMQSAdded 1.3.6.1.4.1.791.2.9.4.5.20986
&
TRAP-TYPE    

uxsIPCMQSDeleted 1.3.6.1.4.1.791.2.9.4.5.20987
&
TRAP-TYPE    

Defined Objects

UxsStatusCPUSequence  
SEQUENCE    
  DisplayString as uxsStatusCPUName  
  INTEGER as uxsStatusCPUUser  
  INTEGER as uxsStatusCPUSys  
  INTEGER as uxsStatusCPUIdle  
  INTEGER as uxsStatusCPUWIO  
  INTEGER as uxsStatusCPUAggStatus  
  INTEGER as uxsStatusCPUUsedValue  
  INTEGER as uxsStatusCPULagValue  
  INTEGER as uxsStatusCPULag  
  INTEGER as uxsStatusCPUWarn  
  INTEGER as uxsStatusCPUCrit  
  INTEGER as uxsStatusCPUMonitor  
  INTEGER as uxsStatusCPUStatus  
  INTEGER as uxsStatusCPULossAction  
  INTEGER as uxsStatusCPULossStatus  

UxsStatusSwapSequence  
SEQUENCE    
  DisplayString as uxsStatusSwapName  
  INTEGER as uxsStatusSwapAggStatus  
  INTEGER as uxsStatusSwapAvailable  
  INTEGER as uxsStatusSwapUsedValue  
  INTEGER as uxsStatusSwapLagValue  
  INTEGER as uxsStatusSwapLag  
  INTEGER as uxsStatusSwapWarnValue  
  INTEGER as uxsStatusSwapCritValue  
  INTEGER as uxsStatusSwapWarn  
  INTEGER as uxsStatusSwapCrit  
  INTEGER as uxsStatusSwapMonitor  
  INTEGER as uxsStatusSwapStatus  
  INTEGER as uxsStatusSwapLossAction  
  INTEGER as uxsStatusSwapLossStatus  

UxsStatusFSysSequence  
SEQUENCE    
  DisplayString as uxsStatusFSysName  
  DisplayString as uxsStatusFSysRelatedTo  
  DisplayString as uxsStatusFSysType  
  INTEGER as uxsStatusFSysStatus  
  INTEGER as uxsStatusFSysSpaceTotal  
  INTEGER as uxsStatusFSysSpaceValue  
  DisplayString as uxsStatusFSysSpaceWarnValue  
  DisplayString as uxsStatusFSysSpaceCritValue  
  DisplayString as uxsStatusFSysSpaceWarn  
  DisplayString as uxsStatusFSysSpaceCrit  
  INTEGER as uxsStatusFSysSpaceMonitor  
  INTEGER as uxsStatusFSysSpaceStatus  
  INTEGER as uxsStatusFSysSpaceDValue  
  DisplayString as uxsStatusFSysSpaceDWarnValue  
  DisplayString as uxsStatusFSysSpaceDCritValue  
  DisplayString as uxsStatusFSysSpaceDWarn  
  DisplayString as uxsStatusFSysSpaceDCrit  
  INTEGER as uxsStatusFSysSpaceDMonitor  
  INTEGER as uxsStatusFSysSpaceDStatus  
  INTEGER as uxsStatusFSysInodesTotal  
  INTEGER as uxsStatusFSysInodesValue  
  DisplayString as uxsStatusFSysInodesWarnValue  
  DisplayString as uxsStatusFSysInodesCritValue  
  DisplayString as uxsStatusFSysInodesWarn  
  DisplayString as uxsStatusFSysInodesCrit  
  INTEGER as uxsStatusFSysInodesMonitor  
  INTEGER as uxsStatusFSysInodesStatus  
  INTEGER as uxsStatusFSysInodesDValue  
  DisplayString as uxsStatusFSysInodesDWarnValue  
  DisplayString as uxsStatusFSysInodesDCritValue  
  DisplayString as uxsStatusFSysInodesDWarn  
  DisplayString as uxsStatusFSysInodesDCrit  
  INTEGER as uxsStatusFSysInodesDMonitor  
  INTEGER as uxsStatusFSysInodesDStatus  
  INTEGER as uxsStatusFSysMountedMonitor  
  INTEGER as uxsStatusFSysMountedStatus  
  INTEGER as uxsStatusFSysLossAction  
  INTEGER as uxsStatusFSysLossStatus  
  INTEGER as uxsStatusFSysRemove  

UxsStatusDiskSequence  
SEQUENCE    
  DisplayString as uxsStatusDiskName  
  INTEGER as uxsStatusDiskAggStatus  
  INTEGER as uxsStatusDiskTPutValue  
  INTEGER as uxsStatusDiskTPutWarn  
  INTEGER as uxsStatusDiskTPutCrit  
  INTEGER as uxsStatusDiskTPutMonitor  
  INTEGER as uxsStatusDiskTPutStatus  
  INTEGER as uxsStatusDiskLossAction  
  INTEGER as uxsStatusDiskLossStatus  
  INTEGER as uxsStatusDiskRemove  

UxsStatusFileSequence  
SEQUENCE    
  DisplayString as uxsStatusFileName  
  DisplayString as uxsStatusFileDesc  
  INTEGER as uxsStatusFileStatus  
  INTEGER as uxsStatusFileExist  
  INTEGER as uxsStatusFileExistMonitor  
  INTEGER as uxsStatusFileExistStatus  
  INTEGER as uxsStatusFileModTime  
  INTEGER as uxsStatusFileModTimeValue  
  INTEGER as uxsStatusFileModTimeMonitor  
  INTEGER as uxsStatusFileModTimeStatus  
  INTEGER as uxsStatusFileSizeValue  
  INTEGER as uxsStatusFileSizeWarn  
  INTEGER as uxsStatusFileSizeCrit  
  INTEGER as uxsStatusFileSizeMonitor  
  INTEGER as uxsStatusFileSizeStatus  
  INTEGER as uxsStatusFileSizeDValue  
  INTEGER as uxsStatusFileSizeDWarn  
  INTEGER as uxsStatusFileSizeDCrit  
  INTEGER as uxsStatusFileSizeDMonitor  
  INTEGER as uxsStatusFileSizeDStatus  
  INTEGER as uxsStatusFileRemove  

UxsStatusProcSequence  
SEQUENCE    
  DisplayString as uxsStatusProcName  
  DisplayString as uxsStatusProcPath  
  DisplayString as uxsStatusProcArgs  
  DisplayString as uxsStatusProcUsers  
  DisplayString as uxsStatusProcPIDs  
  INTEGER as uxsStatusProcStatus  
  INTEGER as uxsStatusProcInstValue  
  INTEGER as uxsStatusProcInstMin  
  INTEGER as uxsStatusProcInstMax  
  INTEGER as uxsStatusProcInstMonitor  
  INTEGER as uxsStatusProcInstStatus  
  INTEGER as uxsStatusProcChldValue  
  INTEGER as uxsStatusProcChldMin  
  INTEGER as uxsStatusProcChldMax  
  INTEGER as uxsStatusProcChldMonitor  
  INTEGER as uxsStatusProcChldStatus  
  INTEGER as uxsStatusProcSizeValue  
  INTEGER as uxsStatusProcSizeMin  
  INTEGER as uxsStatusProcSizeMax  
  INTEGER as uxsStatusProcSizeMonitor  
  INTEGER as uxsStatusProcSizeStatus  
  INTEGER as uxsStatusProcCPUValue  
  INTEGER as uxsStatusProcCPUWarn  
  INTEGER as uxsStatusProcCPUCrit  
  INTEGER as uxsStatusProcCPUMonitor  
  INTEGER as uxsStatusProcCPUStatus  
  INTEGER as uxsStatusProcRemove  

UxsStatusPrnSequence  
SEQUENCE    
  DisplayString as uxsStatusPrnName  
  DisplayString as uxsStatusPrnDesc  
  INTEGER as uxsStatusPrnAggStatus  
  INTEGER as uxsStatusPrnItemsValue  
  INTEGER as uxsStatusPrnItemsWarn  
  INTEGER as uxsStatusPrnItemsCrit  
  INTEGER as uxsStatusPrnItemsMonitor  
  INTEGER as uxsStatusPrnItemsStatus  
  INTEGER as uxsStatusPrnLossAction  
  INTEGER as uxsStatusPrnLossStatus  
  INTEGER as uxsStatusPrnRemove  

UxsStatusNetSequence  
SEQUENCE    
  DisplayString as uxsStatusNetName  
  DisplayString as uxsStatusNetIP  
  INTEGER as uxsStatusNetStatus  
  INTEGER as uxsStatusNetIPktValue  
  INTEGER as uxsStatusNetIPktWarn  
  INTEGER as uxsStatusNetIPktCrit  
  INTEGER as uxsStatusNetIPktMonitor  
  INTEGER as uxsStatusNetIPktStatus  
  INTEGER as uxsStatusNetIErrValue  
  INTEGER as uxsStatusNetIErrWarn  
  INTEGER as uxsStatusNetIErrCrit  
  INTEGER as uxsStatusNetIErrMonitor  
  INTEGER as uxsStatusNetIErrStatus  
  INTEGER as uxsStatusNetOPktValue  
  INTEGER as uxsStatusNetOPktWarn  
  INTEGER as uxsStatusNetOPktCrit  
  INTEGER as uxsStatusNetOPktMonitor  
  INTEGER as uxsStatusNetOPktStatus  
  INTEGER as uxsStatusNetOErrValue  
  INTEGER as uxsStatusNetOErrWarn  
  INTEGER as uxsStatusNetOErrCrit  
  INTEGER as uxsStatusNetOErrMonitor  
  INTEGER as uxsStatusNetOErrStatus  
  INTEGER as uxsStatusNetCollValue  
  INTEGER as uxsStatusNetCollWarn  
  INTEGER as uxsStatusNetCollCrit  
  INTEGER as uxsStatusNetCollMonitor  
  INTEGER as uxsStatusNetCollStatus  
  INTEGER as uxsStatusNetLossAction  
  INTEGER as uxsStatusNetLossStatus  

UxsStatusIPCMQSequence  
SEQUENCE    
  DisplayString as uxsStatusIPCMQID  
  DisplayString as uxsStatusIPCMQKey  
  DisplayString as uxsStatusIPCMQMode  
  DisplayString as uxsStatusIPCMQOwner  
  DisplayString as uxsStatusIPCMQGroup  
  INTEGER as uxsStatusIPCMQBytesAvailable  
  INTEGER as uxsStatusIPCMQBytesValue  
  INTEGER as uxsStatusIPCMQBytesLagValue  
  INTEGER as uxsStatusIPCMQBytesLag  
  DisplayString as uxsStatusIPCMQBytesWarnValue  
  DisplayString as uxsStatusIPCMQBytesCritValue  
  DisplayString as uxsStatusIPCMQBytesWarn  
  DisplayString as uxsStatusIPCMQBytesCrit  
  INTEGER as uxsStatusIPCMQBytesMonitor  
  INTEGER as uxsStatusIPCMQBytesStatus  

UxsAvailFSysSequence  
SEQUENCE    
  DisplayString as uxsAvailFSysName  
  DisplayString as uxsAvailFSysRelatedTo  
  DisplayString as uxsAvailFSysType  

UxsAvailDiskSequence  
SEQUENCE    
  DisplayString as uxsAvailDiskName  

UxsAvailPrnSequence  
SEQUENCE    
  DisplayString as uxsAvailPrnName  

UxsPollNetSequence  
SEQUENCE    
  DisplayString as uxsPollNetName  
  DisplayString as uxsPollNetIP  
  INTEGER as uxsPollNetIPktValue  
  INTEGER as uxsPollNetIErrValue  
  INTEGER as uxsPollNetOPktValue  
  INTEGER as uxsPollNetOErrValue  
  INTEGER as uxsPollNetCollValue  

UxsPollIPCSHMSequence  
SEQUENCE    
  DisplayString as uxsPollIPCSHMID  
  DisplayString as uxsPollIPCSHMKey  
  DisplayString as uxsPollIPCSHMMode  
  DisplayString as uxsPollIPCSHMOwner  
  DisplayString as uxsPollIPCSHMGroup  
  INTEGER as uxsPollIPCSHMMaxSize  
  INTEGER as uxsPollIPCSHMAttached  

UxsPollIPCSEMSequence  
SEQUENCE    
  DisplayString as uxsPollIPCSEMID  
  DisplayString as uxsPollIPCSEMKey  
  DisplayString as uxsPollIPCSEMMode  
  DisplayString as uxsPollIPCSEMOwner  
  DisplayString as uxsPollIPCSEMGroup  
  INTEGER as uxsPollIPCSEMMaxNums