
CENTILLION-FDB-MIB
File:
CENTILLION-FDB-MIB.mib (13520 bytes)
Imported modules
Imported symbols
Defined Objects
| fdbGroup |
1.3.6.1.4.1.930.2.1.2.22 |
| OBJECT IDENTIFIER |
|
|
|
| fdbRemoteAgingTimer |
1.3.6.1.4.1.930.2.1.2.22.1 |
| The timeout period in seconds for aging out dynamically learned remote (off-ring) stations. The default value is 300 seconds. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
10..1000000 |
|
| fdbTableFlush |
1.3.6.1.4.1.930.2.1.2.22.2 |
| When read, this object returns a zero length string. If set, the octets describe which stations to flush. All 4 octets must be specified. The encoding of the octet string follows: octet 1: the fdb type identifier to flush, unknown (1) indicates flush any fdb type. octet 2: 0x0 to flush remote stations 0x1 to flush local stations 0x2 to flush all stations octet 3: the card number to flush, a value of 0xff will flush all cards. octet 4: the port number to flush, a value of 0xff will flush all ports. |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
SIZE(0..4) |
|
| fdbTable |
1.3.6.1.4.1.930.2.1.2.22.3 |
| This table contains fdb information for each station known to the system, one entry per station. Static stations may be created by setting fdbStatus to be valid. The index of fdbStatus will contains infomation on the station type, stationAddress, stationCard and stationPort. Entries may be subsequently modified by setting the appropriate object for the entry. Entries are deleted by clearing stationInUse. |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
FdbEntry |
|
| fdbEntry |
1.3.6.1.4.1.930.2.1.2.22.3.1 |
| An list of station information for each station known to the system. Static stations may be configured by properly specifying at least the fdbType, fdbAddress, fdbCard and fdbPort. |
| OBJECT-TYPE |
|
|
|
| |
FdbEntry |
|
|
| fdbType |
1.3.6.1.4.1.930.2.1.2.22.3.1.1 |
| The type of the station. Station address are represented in the canonical form as specified by their type. |
| OBJECT-TYPE |
|
|
|
| |
FdbTypeId |
|
|
| fdbAddress |
1.3.6.1.4.1.930.2.1.2.22.3.1.2 |
| The fdbs physical address. The physical address is represented in the canonical form according to the corresponding stationType. If the entry is a route-descriptor type, then the physical address is in the form of ring-ring-bridge. |
| OBJECT-TYPE |
|
|
|
| |
PhysAddress |
|
|
| fdbIfIndex |
1.3.6.1.4.1.930.2.1.2.22.3.1.5 |
| The interface through which this station is reached. The value for this object identifies the instance of the ifIndex object defined in MIB-II. If no such entry exists, the value 0 may be returned. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| fdbStatus |
1.3.6.1.4.1.930.2.1.2.22.3.1.6 |
| This indicates the validity of the station. Stations are added by supplying the required objects as index of fdbStatus, and setting the status to valid. Static stations may be deleted by setting this object to invalid. |
| OBJECT-TYPE |
|
|
|
| |
StatusIndicator |
|
|
| fdbLocal |
1.3.6.1.4.1.930.2.1.2.22.3.1.7 |
| If set, this object indicates the station is attached to a ring that is directly attached to the token ring port. This object does not apply to Ethernet stations. |
| OBJECT-TYPE |
|
|
|
| |
BitField |
|
|
| fdbDuplicate |
1.3.6.1.4.1.930.2.1.2.22.3.1.9 |
| Indicates that another fdb with the same address was learned from a different card and port. |
| OBJECT-TYPE |
|
|
|
| |
BitField |
|
|
| fdbRIFPath |
1.3.6.1.4.1.930.2.1.2.22.3.1.10 |
| The RIF path to the station. The RIF Path is specified as being sourced from the system, as read from left-to-right. A RIF path is valid only for objects whose stationType is token-ring. The value may be a zero length string. |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
SIZE(0..28) |
|
| fdbSSTable |
1.3.6.1.4.1.930.2.1.2.22.4 |
| This table contains the list of user defined static stations. All the objects in this table are read-only and are intended to aid reading static station configuration. |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
FdbSSEntry |
|
| fdbSSEntry |
1.3.6.1.4.1.930.2.1.2.22.4.1 |
| This is an entry in the fdbSSTable which is indexed by fdbSSIndex. Adding to the static station list is done via fdbTable. All objects here are read-only. |
| OBJECT-TYPE |
|
|
|
| |
FdbSSEntry |
|
|
| fdbSSIndex |
1.3.6.1.4.1.930.2.1.2.22.4.1.1 |
| This is the index to the static station table. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| cnfdbTable |
1.3.6.1.4.1.930.2.1.2.22.5 |
| This table contains fdb information for each station known to the system, one entry per station per vlan. Static stations may be created by setting fdbStatus to be valid. The index of fdbStatus will contains infomation on the station type, stationAddress, stationCard, stationPort and vlanId. Entries may be subsequently modified by setting the appropriate object for the entry. Entries are deleted by clearing stationInUse. Basically, this table is identical with the fdbTable except with fdbVlanId being introduced |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
CnfdbEntry |
|
| cnfdbEntry |
1.3.6.1.4.1.930.2.1.2.22.5.1 |
| An list of station information for each station per vlan known to the system. Static stations may be configured by properly specifying at least the cnfdbType, cnfdbAddress, cnfdbCard, cnfdbPort and cnfdbVlanId. |
| OBJECT-TYPE |
|
|
|
| |
CnfdbEntry |
|
|
| cnfdbType |
1.3.6.1.4.1.930.2.1.2.22.5.1.1 |
| The type of the station. Station address are represented in the canonical form as specified by their type. |
| OBJECT-TYPE |
|
|
|
| |
FdbTypeId |
|
|
| cnfdbAddress |
1.3.6.1.4.1.930.2.1.2.22.5.1.2 |
| The fdbs physical address. The physical address is represented in the canonical form according to the corresponding stationType. If the entry is a route-descriptor type, then the physical address is in the form of ring-ring-bridge. |
| OBJECT-TYPE |
|
|
|
| |
PhysAddress |
|
|
| cnfdbIfIndex |
1.3.6.1.4.1.930.2.1.2.22.5.1.6 |
| The interface through which this station is reached. The value for this object identifies the instance of the ifIndex object defined in MIB-II. If no such entry exists, the value 0 may be returned. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| cnfdbStatus |
1.3.6.1.4.1.930.2.1.2.22.5.1.7 |
| This indicates the validity of the station. Stations are added by supplying the required objects as index of fdbStatus, and setting the status to valid. Static stations may be deleted by setting this object to invalid. |
| OBJECT-TYPE |
|
|
|
| |
StatusIndicator |
|
|
| cnfdbLocal |
1.3.6.1.4.1.930.2.1.2.22.5.1.8 |
| If set, this object indicates the station is attached to a ring that is directly attached to the token ring port. This object does not apply to Ethernet stations. |
| OBJECT-TYPE |
|
|
|
| |
BitField |
|
|
| cnfdbRIFPath |
1.3.6.1.4.1.930.2.1.2.22.5.1.11 |
| The RIF path to the station. The RIF Path is specified as being sourced from the system, as read from left-to-right. A RIF path is valid only for objects whose stationType is token-ring. The value may be a zero length string. |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
SIZE(0..28) |
|
Defined Objects
| FdbTypeId |
|
| INTEGER |
unknown(1), token-ring(2), ethernet(3), route-descriptor(4) |
|
|
| FdbEntry |
|
| SEQUENCE |
|
|
|
| |
FdbTypeId as fdbType |
|
|
| |
PhysAddress as fdbAddress |
|
|
| |
CardId as fdbCard |
|
|
| |
PortId as fdbPort |
|
|
| |
INTEGER as fdbIfIndex |
|
|
| |
StatusIndicator as fdbStatus |
|
|
| |
BitField as fdbLocal |
|
|
| |
BitField as fdbStatic |
|
|
| |
BitField as fdbDuplicate |
|
|
| |
OCTET STRING as fdbRIFPath |
|
|
| FdbSSEntry |
|
| SEQUENCE |
|
|
|
| |
INTEGER as fdbSSIndex |
|
|
| |
FdbTypeId as fdbSSType |
|
|
| |
PhysAddress as fdbSSAddress |
|
|
| |
CardId as fdbSSCard |
|
|
| |
PortId as fdbSSPort |
|
|
| |
VlanId as fdbSSVlanId |
|
|
| CnfdbEntry |
|
| SEQUENCE |
|
|
|
| |
FdbTypeId as cnfdbType |
|
|
| |
PhysAddress as cnfdbAddress |
|
|
| |
CardId as cnfdbCard |
|
|
| |
PortId as cnfdbPort |
|
|
| |
VlanId as cnfdbVlanId |
|
|
| |
INTEGER as cnfdbIfIndex |
|
|
| |
StatusIndicator as cnfdbStatus |
|
|
| |
BitField as cnfdbLocal |
|
|
| |
BitField as cnfdbStatic |
|
|
| |
BitField as cnfdbDuplicate |
|
|
| |
OCTET STRING as cnfdbRIFPath |
|
|