CENTILLION-LESBUS-MIB

File: CENTILLION-LESBUS-MIB.mib (22172 bytes)

Imported modules

RFC-1212 LAN-EMULATION-CLIENT-MIB LAN-EMULATION-LES-MIB
S5-TCS-MIB CENTILLION-ROOT-MIB LAN-EMULATION-ELAN-MIB

Imported symbols

OBJECT-TYPE lecIndex AtmLaneAddress
LesLocalIndex TimeIntervalSec atmLane
EnableIndicator lecsConfIndex

Defined Objects

cnLesBusExtnGroup 1.3.6.1.4.1.930.2.2.3.1
OBJECT IDENTIFIER    

cnLesBusTable 1.3.6.1.4.1.930.2.2.3.1.1
smart les/bus enable and unique server id.
OBJECT-TYPE    
  SEQUENCE OF  
    CnLesBusEntry

cnLesBusEntry 1.3.6.1.4.1.930.2.2.3.1.1.1
.
OBJECT-TYPE    
  CnLesBusEntry  

cnLesBusConfIndex 1.3.6.1.4.1.930.2.2.3.1.1.1.1
A value which uniquely identifies a conceptual row in the lesConfTable.
OBJECT-TYPE    
  LesLocalIndex  

cnLesBusSmartLes 1.3.6.1.4.1.930.2.2.3.1.1.1.2
This object is used to turn on/off smart les/bus.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

cnLesBusServerId 1.3.6.1.4.1.930.2.2.3.1.1.1.3
This object specifies the unique server id among all les/bus pairs that serve the same elan.
OBJECT-TYPE    
  INTEGER  

cnLesBusBusAddrSpec 1.3.6.1.4.1.930.2.2.3.1.1.1.4
The bus address.
OBJECT-TYPE    
  AtmLaneAddress  

cnLesBusBusAddrActual 1.3.6.1.4.1.930.2.2.3.1.1.1.5
The bus address.
OBJECT-TYPE    
  AtmLaneAddress  

cnLesBusPeerTable 1.3.6.1.4.1.930.2.2.3.1.2
The LES/BUS peer table. This table contains the all LES/BUS pairs of the ELANs managed by the agent. The LES/BUS instantiated by the agent is also included in this table. Other LES/BUS pairs that are not running in the same system being managed by the agent are configured by the user. Note that there is no verification protocol supported for the entries configured by the user.
OBJECT-TYPE    
  SEQUENCE OF  
    CnLesBusPeerEntry

cnLesBusPeerEntry 1.3.6.1.4.1.930.2.2.3.1.2.1
A pair of LES/BUS for the ELAN managed by the agent.
OBJECT-TYPE    
  CnLesBusPeerEntry  

cnLesBusIndex 1.3.6.1.4.1.930.2.2.3.1.2.1.1
Index into the ELAN this pair of LES/BUS is servicing.
OBJECT-TYPE    
  LesLocalIndex  

cnLesBusPeerIndex 1.3.6.1.4.1.930.2.2.3.1.2.1.2
An arbitrary integer which uniquly identifies a pair of LES/BUS within an ELAN.
OBJECT-TYPE    
  INTEGER  

cnLesBusPeerLesAddr 1.3.6.1.4.1.930.2.2.3.1.2.1.3
The ATM address of the LES.
OBJECT-TYPE    
  AtmLaneAddress  

cnLesBusPeerBusAddr 1.3.6.1.4.1.930.2.2.3.1.2.1.4
The ATM address of the BUS.
OBJECT-TYPE    
  AtmLaneAddress  

cnLesBusPeerStatus 1.3.6.1.4.1.930.2.2.3.1.2.1.5
This object is used to create or destroy an entry from this table. This object also reflect the current state of the peer LES/BUS. If both peer LES and BUS are connected to this LES/BUS, then active(3) is returned when read, otherwise inactive(4) will be returned.
OBJECT-TYPE    
  INTEGER create(1), delete(2), active(3), inactive(4)  

cnLesBusPortTable 1.3.6.1.4.1.930.2.2.3.1.3
The ATM port a LESBUS uses to establish virtual circuits(VCC). A User can choose to either select the any-port capability, which let the LESBUS choose whichever the ATM port is available. Or the user can specify a list of ATM ports the LESBUS will request the VCCs. When a list of ATM ports are specified, There are four objects used for specifying the ATM port numbers. The object cnLesBusPortAtmPort1 is used first, the object cnLesBusPortAtmPort2 second if the first failed and so on.
OBJECT-TYPE    
  SEQUENCE OF  
    CnLesBusPortEntry

cnLesBusPortEntry 1.3.6.1.4.1.930.2.2.3.1.3.1
Each entry represent a LESBUS maintained by this agent. The entries are indexed by the same index (LesBusIndex) from the LesBusConfigTable defined in the ATM Forum LESBUS MIB.
OBJECT-TYPE    
  CnLesBusPortEntry  

cnLesBusPortElanIndex 1.3.6.1.4.1.930.2.2.3.1.3.1.1
An index to the LESBUS pair that will use this table.
OBJECT-TYPE    
  INTEGER  

cnLesBusPortIndex 1.3.6.1.4.1.930.2.2.3.1.3.1.2
An index to an entry in the port table
OBJECT-TYPE    
  INTEGER  

cnLesBusCardId 1.3.6.1.4.1.930.2.2.3.1.3.1.3
Card ID of the ATM card.
OBJECT-TYPE    
  INTEGER  

cnLesBusPortId 1.3.6.1.4.1.930.2.2.3.1.3.1.4
Port ID of the ATM port.
OBJECT-TYPE    
  INTEGER  

cnLesBusPortStatus 1.3.6.1.4.1.930.2.2.3.1.3.1.5
The object is used to create or destroy an entry from this table. This object also reflect the current state of the port entry. If the client uses this port to join the ELAN, then active(3) is returned when read.
OBJECT-TYPE    
  INTEGER create(1), delete(2), active(3), inactive(4)  

cnLecExtnGroup 1.3.6.1.4.1.930.2.2.3.2
OBJECT IDENTIFIER    

cnLecServerTable 1.3.6.1.4.1.930.2.2.3.2.1
The LE Client's user configured server list. The LEC can use any pf the servers defined in this table. The search order matches the order of the entries in the table.
OBJECT-TYPE    
  SEQUENCE OF  
    CnLecServerEntry

cnLecServerEntry 1.3.6.1.4.1.930.2.2.3.2.1.1
A LE server that the LEC can use.
OBJECT-TYPE    
  CnLecServerEntry  

cnLecServerIndex 1.3.6.1.4.1.930.2.2.3.2.1.1.1
An index to the lec server table.
OBJECT-TYPE    
  INTEGER  

cnLecServerType 1.3.6.1.4.1.930.2.2.3.2.1.1.2
The field specifies how the the LEC can get to the server and the server type (LES or LECS). The LEC can connect to either the LECS via ILMI/PVC/ATM address or the LES via ATm address.
OBJECT-TYPE    
  INTEGER lecsAtmForum(1), lecsFromIlmi(2), directLecs(3), directLes(4), lecsFromPvc(5)  

cnLecServerAddress 1.3.6.1.4.1.930.2.2.3.2.1.1.3
The field specifies the ATM address (20 octets) of the server when an ATM address is needed. If an ATM address is not needed, zero will be returned when read.
OBJECT-TYPE    
  AtmLaneAddress  

cnLecServerStatus 1.3.6.1.4.1.930.2.2.3.2.1.1.4
The object is used to create or destroy an entry from this table. The entry is always in active state once created.
OBJECT-TYPE    
  INTEGER create(1), delete(2), active(3)  

cnLecPortTable 1.3.6.1.4.1.930.2.2.3.2.2
The ATM port a LEC uses to establish virtual circuits(VCC). A User can choose to either select the any-port capability, which let the LEC choose whichever the ATM port is available. Or the user can specify a list of ATM ports the LEC will request the VCCs. When a list of ATM ports are specified, There are four objects used for specifying the ATM port numbers. The object cnLecPortAtmPort1 is used first, the object cnlecPortAtmPort2 second if the first failed and so on.
OBJECT-TYPE    
  SEQUENCE OF  
    CnLecPortEntry

cnLecPortEntry 1.3.6.1.4.1.930.2.2.3.2.2.1
Each entry represent a LEC maintained by this agent. The entries are indexed by the same index (lecIndex) from the lecConfigTable defined in the ATM Forum LEC MIB.
OBJECT-TYPE    
  CnLecPortEntry  

cnLecPortlecIndex 1.3.6.1.4.1.930.2.2.3.2.2.1.1
An index to the LEC that will use this table.
OBJECT-TYPE    
  INTEGER  

cnLecPortIndex 1.3.6.1.4.1.930.2.2.3.2.2.1.2
An index to an entry in the port table
OBJECT-TYPE    
  INTEGER  

cnLecCardId 1.3.6.1.4.1.930.2.2.3.2.2.1.3
Card ID of the ATM card.
OBJECT-TYPE    
  INTEGER  

cnLecPortId 1.3.6.1.4.1.930.2.2.3.2.2.1.4
Port ID of the ATM port.
OBJECT-TYPE    
  INTEGER  

cnLecPortStatus 1.3.6.1.4.1.930.2.2.3.2.2.1.5
The object is used to create or destroy an entry from this table. This object also reflect the current state of the port entry. If the client uses this port to join the ELAN, then active(3) is returned when read.
OBJECT-TYPE    
  INTEGER create(1), delete(2), active(3), inactive(4)  

cnLecConfigExtnTable 1.3.6.1.4.1.930.2.2.3.2.3
This the extension table of lecConfigTable.
OBJECT-TYPE    
  SEQUENCE OF  
    CnLecConfigExtnEntry

cnLecConfigExtnEntry 1.3.6.1.4.1.930.2.2.3.2.3.1
Each table entry contains configuration information for one LAN Emulation Client.
OBJECT-TYPE    
  CnLecConfigExtnEntry  

cnLecTargetlessArp 1.3.6.1.4.1.930.2.2.3.2.3.1.1
This object is used to enable or disable the targetless LE_ARP.
OBJECT-TYPE    
  EnableIndicator  

cnLecsExtnGroup 1.3.6.1.4.1.930.2.2.3.3
OBJECT IDENTIFIER    

cnLecsPortTable 1.3.6.1.4.1.930.2.2.3.3.1
The ATM port a Lecs uses to establish virtual circuits(VCC). A User can choose to either select the any-port capability, which let the Lecs choose whichever the ATM port is available. Or the user can specify a list of ATM ports the Lecs will request the VCCs. When a list of ATM ports are specified, There are four objects used for specifying the ATM port numbers. The object cnLecsPortAtmPort1 is used first, the object cnLecsPortAtmPort2 second if the first failed and so on.
OBJECT-TYPE    
  SEQUENCE OF  
    CnLecsPortEntry

cnLecsPortEntry 1.3.6.1.4.1.930.2.2.3.3.1.1
Each entry represent a Lecs maintained by this agent. The entries are indexed by the same index (LecsIndex) from the LecsConfigTable defined in the ATM Forum Lecs MIB.
OBJECT-TYPE    
  CnLecsPortEntry  

cnLecsIndex 1.3.6.1.4.1.930.2.2.3.3.1.1.1
An index to the Lecs pair that will use this table.
OBJECT-TYPE    
  INTEGER  

cnLecsPortIndex 1.3.6.1.4.1.930.2.2.3.3.1.1.2
An index to an entry in the port table
OBJECT-TYPE    
  INTEGER  

cnLecsCardId 1.3.6.1.4.1.930.2.2.3.3.1.1.3
Card ID of the ATM card.
OBJECT-TYPE    
  INTEGER  

cnLecsPortId 1.3.6.1.4.1.930.2.2.3.3.1.1.4
Port ID of the ATM port.
OBJECT-TYPE    
  INTEGER  

cnLecsPortStatus 1.3.6.1.4.1.930.2.2.3.3.1.1.5
The object is used to create or destroy an entry from this table. This object also reflect the current state of the port entry. If the client uses this port to join the ELAN, then active(3) is returned when read.
OBJECT-TYPE    
  INTEGER create(1), delete(2), active(3), inactive(4)  

cnLecsExtnTable 1.3.6.1.4.1.930.2.2.3.3.2
LECS LANE extension table
OBJECT-TYPE    
  SEQUENCE OF  
    CnLecsExtnEntry

cnLecsExtnEntry 1.3.6.1.4.1.930.2.2.3.3.2.1
An extension to the lecsConfEntry which contains objects associated to a LECS.
OBJECT-TYPE    
  CnLecsExtnEntry  

cnLecsExtnAtmAddressSelect 1.3.6.1.4.1.930.2.2.3.3.2.1.1
LECS ATM Address selection. atmForum(1) - ATM Forum well known ATM Address. userDefined(2) - User defined ATM Address.
OBJECT-TYPE    
  INTEGER atmForum(1), userDefined(2)  

atmCallRoutingConfig 1.3.6.1.4.1.930.2.2.3.4
OBJECT IDENTIFIER    

atmCallRoutingConfigTable 1.3.6.1.4.1.930.2.2.3.4.1
ATM call routing config table
OBJECT-TYPE    
  SEQUENCE OF  
    AtmCallRoutingConfigEntry

atmCallRoutingConfigEntry 1.3.6.1.4.1.930.2.2.3.4.1.1
Objects atmCallRoutingId, and atmCallRoutingRowStatus are required during row creation. And object elanLesRowStatus is required during row deletion.
OBJECT-TYPE    
  AtmCallRoutingConfigEntry  

atmCallRoutingId 1.3.6.1.4.1.930.2.2.3.4.1.1.1
Route id
OBJECT-TYPE    
  INTEGER  

atmCallRoutingAtmAddress 1.3.6.1.4.1.930.2.2.3.4.1.1.2
OBJECT-TYPE    
  AtmLaneAddress  

atmCallRoutingType 1.3.6.1.4.1.930.2.2.3.4.1.1.3
OBJECT-TYPE    
  INTEGER host(1), network(2), linkGroup(3)  

atmCallRoutingCard 1.3.6.1.4.1.930.2.2.3.4.1.1.4
This field indicates the ATM card id.
OBJECT-TYPE    
  INTEGER 1..16  

atmCallRoutingPort 1.3.6.1.4.1.930.2.2.3.4.1.1.5
This field indicates ATM port id.
OBJECT-TYPE    
  INTEGER 1..16  

atmCallRoutingCost 1.3.6.1.4.1.930.2.2.3.4.1.1.6
The cost of the route. range from 0 to 255 with 0 the least cost. This is the link group id if atmCallRoutingType is linkGroup.
OBJECT-TYPE    
  INTEGER 0..255  

atmCallRoutingEnable 1.3.6.1.4.1.930.2.2.3.4.1.1.7
Enable bit of the call routing. 1 = enable routing 2 = disable routing
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

atmCallRoutingRowStatus 1.3.6.1.4.1.930.2.2.3.4.1.1.8
The current status of the entry. Entries may be added by specifying a value of valid, and removed by setting the status to invalid.
OBJECT-TYPE    
  INTEGER add(1), delete(2)  

atmCallRoutingScope 1.3.6.1.4.1.930.2.2.3.4.1.1.9
PNNI scope value
OBJECT-TYPE    
  INTEGER 0..104  

atmCallRoutingVpi 1.3.6.1.4.1.930.2.2.3.4.1.1.10
The VPI of the route.
OBJECT-TYPE    
  INTEGER 0..15  

cnLaneGlobalConf 1.3.6.1.4.1.930.2.2.3.5
OBJECT IDENTIFIER    

cnLaneSig 1.3.6.1.4.1.930.2.2.3.5.1
Global parameter to enable or disable signalling in the box.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

cnLaneEdge 1.3.6.1.4.1.930.2.2.3.5.2
Global configuration of the box edge: configured as LEC only services edgeAndswitch: configured as full LANE services switchOnly: configured as switch only services.
OBJECT-TYPE    
  INTEGER edgeOnly(1), edgeAndSwitch(2), switchOnly(3)  

cnLaneNetPrefix 1.3.6.1.4.1.930.2.2.3.5.3
Useful if the box is configured as edgeAndswitch.
OBJECT-TYPE    
  OCTET STRING SIZE(13)  

cnLaneStatusEnquiryEnable 1.3.6.1.4.1.930.2.2.3.5.4
This object is used to enable or disable the Status enquiry. Note that this parametwer is used only if the ATM signalling is enabled.
OBJECT-TYPE    
  EnableIndicator  

cnLaneStatusEnquiryInterval 1.3.6.1.4.1.930.2.2.3.5.5
The Status Enquiry requests for each call are sent periodically at this interval (in secs). Note that this parametwer is used only if the ATM signalling and atmSysStatusEnquiryEnable are enabled.
OBJECT-TYPE    
  TimeIntervalSec 120..9999  

Defined Objects

CnLesBusEntry  
SEQUENCE    
  LesLocalIndex as cnLesBusConfIndex  
  INTEGER as cnLesBusSmartLes  
  INTEGER as cnLesBusServerId  
  AtmLaneAddress as cnLesBusBusAddrSpec  
  AtmLaneAddress as cnLesBusBusAddrActual  

CnLesBusPeerEntry  
SEQUENCE    
  LesLocalIndex as cnLesBusIndex  
  INTEGER as cnLesBusPeerIndex  
  AtmLaneAddress as cnLesBusPeerLesAddr  
  AtmLaneAddress as cnLesBusPeerBusAddr  
  INTEGER as cnLesBusPeerStatus  

CnLesBusPortEntry  
SEQUENCE    
  INTEGER as cnLesBusPortElanIndex  
  INTEGER as cnLesBusPortIndex  
  INTEGER as cnLesBusCardId  
  INTEGER as cnLesBusPortId  
  INTEGER as cnLesBusPortStatus  

CnLecServerEntry  
SEQUENCE    
  INTEGER as cnLecServerIndex  
  INTEGER as cnLecServerType  
  AtmLaneAddress as cnLecServerAddress  
  INTEGER as cnLecServerStatus  

CnLecPortEntry  
SEQUENCE    
  INTEGER as cnLecPortlecIndex  
  INTEGER as cnLecPortIndex  
  INTEGER as cnLecCardId  
  INTEGER as cnLecPortId  
  INTEGER as cnLecPortStatus  

CnLecsPortEntry  
SEQUENCE    
  INTEGER as cnLecsIndex  
  INTEGER as cnLecsPortIndex  
  INTEGER as cnLecsCardId  
  INTEGER as cnLecsPortId  
  INTEGER as cnLecsPortStatus  

CnLecsExtnEntry  
SEQUENCE    
  INTEGER as cnLecsExtnAtmAddressSelect  

AtmCallRoutingConfigEntry  
SEQUENCE    
  INTEGER as atmCallRoutingId  
  AtmLaneAddress as atmCallRoutingAtmAddress  
  INTEGER as atmCallRoutingType  
  INTEGER as atmCallRoutingCard  
  INTEGER as atmCallRoutingPort  
  INTEGER as atmCallRoutingCost  
  INTEGER as atmCallRoutingEnable  
  INTEGER as atmCallRoutingRowStatus  
  INTEGER as atmCallRoutingScope  
  INTEGER as atmCallRoutingVpi  

CnLecConfigExtnEntry  
SEQUENCE    
  EnableIndicator as cnLecTargetlessArp