CHASSIS-MIB

File: CHASSIS-MIB.mib (69917 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB
BRIDGE-MIB XYLAN-BASE-MIB

Imported symbols

Gauge Counter TimeTicks
IpAddress OBJECT-TYPE DisplayString
MacAddress xylanChassis

Defined Objects

chasInfo 1.3.6.1.4.1.800.2.1.1
OBJECT IDENTIFIER    

chasMake 1.3.6.1.4.1.800.2.1.1.1
An authoritative identification of this chassis or device. By convention, this value is allocated within the SMI enterprises subtree(1.3.6.1.4.1), and provides an easy and unambiguous means for determining `what kind of box' is being managed. If this information is not present or unknown, its value should be set to chasTypeUnknown.
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

chasType 1.3.6.1.4.1.800.2.1.1.2
The particular type of Xylan chassis. The value of other(2) will be returned if the variable is supported but the chassis is not one of the currently known types of Omni5(3) or Omni9(4).
OBJECT-TYPE    
  XylanChasType  

chasDescription 1.3.6.1.4.1.800.2.1.1.3
A description for this chassis/product. The value shall default to the textual product description, but the user can override this to anything desired.
OBJECT-TYPE    
  DisplayString SIZE(0..63)  

chasPhysicalChanges 1.3.6.1.4.1.800.2.1.1.4
Depicts the number of physical changes that have occured to the chassis MIB since reset or power on. This includes additions and removal of modules in the module table or additions and removal of controllers in the controller table.
OBJECT-TYPE    
  Counter  

chasLogicalChanges 1.3.6.1.4.1.800.2.1.1.5
Depicts the number of logical changes that have occured to the chassis MIB since reset or power on. This includes all sets to name strings.
OBJECT-TYPE    
  Counter  

chasNoOfResets 1.3.6.1.4.1.800.2.1.1.6
This object is a count of the number of times this this station has been reset since a cold-start.
OBJECT-TYPE    
  Counter  

chasBaseMacAddress 1.3.6.1.4.1.800.2.1.1.7
This object is the 'base' MAC address for this chassis.
OBJECT-TYPE    
  MacAddress  

chasFreeSlots 1.3.6.1.4.1.800.2.1.1.8
The number of free front panel slots.
OBJECT-TYPE    
  INTEGER 0..16  

chasIpAddrToPing 1.3.6.1.4.1.800.2.1.1.9
The IP address to which a ping should be issued. A Network Management Station can use this to issue directed broadcast pings so as to augment the IP ARP table. The ARP table is useful in discovering the IP network topology.
OBJECT-TYPE    
  IpAddress  

chasDupMacSupport 1.3.6.1.4.1.800.2.1.1.10
The number of Duplication of any single MAC address learned. 0 indicates no duplicate MAC support, 1 up to 64 indicates the number of duplication allowed per board. The value of 1 indicates no duplication allowed per board only, but it is allowed between boards for the entire chassis.
OBJECT-TYPE    
  INTEGER 0..64  

chasNewDupMacSupport 1.3.6.1.4.1.800.2.1.1.11
This variable allows the user to cause duplicate MAC addresses to age out concurrently. If set to zero, it is ignored and the aging timer for each group where the address was learned will be used. Values 1 through 9 are not valid. If set to a value between 10 and 1000000, it will be used instead of the group aging timers. Units are seconds.
OBJECT-TYPE    
  INTEGER 0..1000000  

chasSonetMonitoring 1.3.6.1.4.1.800.2.1.1.12
on(1) - Start Sonet Monitoring. If the image file (sec.img) is not loaded, this variable should be set to load it. off(2) - Stop Sonet Monitoring.
OBJECT-TYPE    
  INTEGER  

chasDateAndTime 1.3.6.1.4.1.800.2.1.1.13
Time and date information for the chassis.
OBJECT-TYPE    
  INTEGER  

chasCurrentDateAndTime 1.3.6.1.4.1.800.2.1.1.13.1
Current date and time. Format - yyyymmddThhmmss yyyy - year, mm - month, dd - day, 'T' separator, hh - hour, mm - month, ss - second.
OBJECT-TYPE    
  OCTET STRING SIZE(15)  

chasTimezoneName 1.3.6.1.4.1.800.2.1.1.13.2
String containing the time zone name. nzst - New Zealand Time aest - Australia East Time gst - Guam Time acst - Australia Central Time jst - Japan Time kst - Korean Time awst - Australia West Time msk - Moscow Time eet - Eastern European Time cet - Central European Time met - Middle European Time bst - British Time wet - Western European Time gmt - Greenwich Mean Time wat - West Africa Time nst - Newfoundland Time ast - Atlantic Time est - Eastern Time (USA) cst - Cnetral Time (USA) mst - Mountain Time (USA) pst - Pacific Time (USA) akst - Alaska Time hst - Hawaii Time Returns none is not set.
OBJECT-TYPE    
  DisplayString SIZE(0..10)  

chasTimezoneOffset 1.3.6.1.4.1.800.2.1.1.13.3
Time zone offset + or - minutes from UTC.
OBJECT-TYPE    
  INTEGER -780..720  

chasTimezoneDstAdmin 1.3.6.1.4.1.800.2.1.1.13.4
Daylight Savings Time enable/disable.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

chasTimezoneDst 1.3.6.1.4.1.800.2.1.1.13.5
Time and date information for the chassis. wdmmhhmmwdmmhhmmHHMM | start|| end ||offset| w-d-mm,hh:mm,w-d-mm,hh:mm,HH:MM w - Week (first(1), second(2), third(3), fourth(4), last(>4)) d - Day (Sunday(1), ..., Saturday(7)) m - Month (January(1), ..., December(12)) hh:mm - time of day DST changes (0-23:0-59) HH:MM - offset DST changes by. (0-23:0-59) Example: 11040200611002000100 - Starts First Sunday in April at 2:00 Ends Last Sunday in October at 2:00 Time changes by 1:00 hr. Returns disabled if disabled.
OBJECT-TYPE    
  OCTET STRING SIZE(20)  

chasPhysical 1.3.6.1.4.1.800.2.1.2
OBJECT IDENTIFIER    

chasModuleTable 1.3.6.1.4.1.800.2.1.2.1
A list of installed modules in this chassis.
OBJECT-TYPE    
  SEQUENCE OF  
    ChasModuleEntry

chasModuleEntry 1.3.6.1.4.1.800.2.1.2.1.1
A module entry containing objects for a particular module. This would contain entries that relate to the module in a specific 'slot'.
OBJECT-TYPE    
  ChasModuleEntry  

chasModuleSlot 1.3.6.1.4.1.800.2.1.2.1.1.1
The (zero-based) front slot number within the chassis.
OBJECT-TYPE    
  INTEGER  

chasModuleSubUnit 1.3.6.1.4.1.800.2.1.2.1.1.2
The sub-unit number within module in slot 'n'. For each non-empty slot there will exist a module entry with a chasModuleSubUnit value of base. If the chasModuleType of that chasModuleEntry is hsm, then there may be additional chasModuleEntrys with the same chasModuleSlot value but with chasModuleSubUnit values of hsm1, hsm2 or csm3. These are HSM or CSM-U sub-modules. An HSM module can have up to 2 daughter cards on it. The first position would be denoted by hsm1(2) and the second position is hsm2(3). A CSM-U module can have up to 3 daughter cards on it.The first position would be denoted by hsm1(2) and the second position is hsm2(3) and the third postion is csm3(4). The general implication of this field is: each occupied slot will have an entry field will be base(1), and may if the module supports daughter cards have entries for which if this field is hsm1(2), hsm2(3) or cms3(4), corrosponding to an installed daughter card on the HSM or CMS-U in the specified chasModuleSlot. (and the card type will be listed in chasModuleType).
OBJECT-TYPE    
  XylanModuleSubunit  

chasModuleType 1.3.6.1.4.1.800.2.1.2.1.1.3
An authoritative identification of the type of physical module that is in this physical location. Notice that the value empty(3) will not be seen in this table, because this table will only have entries that contain modules.
OBJECT-TYPE    
  XylanModuleType  

chasModulePartNum 1.3.6.1.4.1.800.2.1.2.1.1.4
The part number of ths module.
OBJECT-TYPE    
  DisplayString SIZE(0..11)  

chasModuleDescription 1.3.6.1.4.1.800.2.1.2.1.1.5
Textual description of this particular module. The user can change this value to whatever is desired.
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

chasModuleHwRevision 1.3.6.1.4.1.800.2.1.2.1.1.6
The current revision of this module's hardware.
OBJECT-TYPE    
  INTEGER 0..99  

chasModuleHwModLevel 1.3.6.1.4.1.800.2.1.2.1.1.7
The modification level of this module's hardware.
OBJECT-TYPE    
  INTEGER 0..99  

chasModuleSerialNumber 1.3.6.1.4.1.800.2.1.2.1.1.8
The serial number of the module present in this physical location.
OBJECT-TYPE    
  DisplayString SIZE(0..11)  

chasModuleMfgDate 1.3.6.1.4.1.800.2.1.2.1.1.9
The manufacturing date for this module. This data is retrieved from the module non-volitile memory.
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

chasModuleFwVersion 1.3.6.1.4.1.800.2.1.2.1.1.10
Textual decription of the version/revision level for this module's firmware/software.
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

chasModuleBaseMacAddress 1.3.6.1.4.1.800.2.1.2.1.1.11
This is the 'base' MAC address for this module. If the module does not support the notion of MAC addresses, the vaule shall be 0.
OBJECT-TYPE    
  MacAddress  

chasModuleTimeStamp 1.3.6.1.4.1.800.2.1.2.1.1.12
The value of sysUpTime of this management entitiy, when this module was last (re-) initialized.
OBJECT-TYPE    
  TimeTicks  

chasModuleAdminStatus 1.3.6.1.4.1.800.2.1.2.1.1.13
Provides desired (and actual) state of the given module. Notice that not all values may be supported by a specified physical module. In this case an SNMP error returned when a set is attempted. All modules (even empty slots) are in an unknown(1) state when the chassis first powers up. The invalid state is for non-existant modules, and hence is never seen. Neither of the unknown(1) or invalid(2) status values can be written. A physical module can be activated by writing a value of enable(3). A physical module may be de-activated by writing a value of disable(4). In a disabled state, the module is present in the chassis, but is benign. A disabled module is availible for subsequent activation. Writing a value of reset(5), disables the module AND initiates a reset sequence. Writing a value of load(6), disables the module AND initiates a software load sequence. Writing a value of test(7), disables the module AND initiates selftest within the module.
OBJECT-TYPE    
  INTEGER unknown(1), invalid(2), enable(3), disable(4), reset(5), load(6), test(7)  

chasModuleOperStatus 1.3.6.1.4.1.800.2.1.2.1.1.14
Provides operational state of the given module. The exact definition of the values is implementation specific. A value of unknown(1) implies some undetermined state, possibly as a result of a module failing the low-level selftest. A value of invalid(2) may mean that the module exists but the chassis manager has no direct control over it. A value of operational(3) implies that the entity is running with no errors or warnings. A value of disabled(4) reflects the response to the chasModuleAdminStatus of disable(4). A value of resetInProgress(5) also reflects the equivalent AdminStatus reset(5). Note that the states warning(8), nonFatalError(9), and fatalError(10) reflect conditions detected during operation. The module may or may not be fuctional at this point. For example a module's value of AdminStatus is disable(4), the OperStatus will reflect that. The AdminStatus is set to enable(3), the OperStatus might then change to testing(7) then change to operational(3).
OBJECT-TYPE    
  INTEGER unknown(1), invalid(2), operational(3), disabled(4), resetInProgress(5), loadInProgress(6), testing(7), warning(8), nonFatalError(9), fatalError(10)  

chasModuleLedStatus 1.3.6.1.4.1.800.2.1.2.1.1.15
The LED state for this module. The exact definition of the values are implimentation dependent. For example, a power supply module may not have any LEDs present, while a network interface element might have 28 LEDs and a Controller might have 6 LEDs. NOTE: due to European regulation, the LEDs will NEVER be illuminated RED! They in fact will be either green OR amber. This will be reflected in the MIB as either GRN=1/RED=0 or GRN=1/RED=1. Of course, if both are off then the LED is not illuminated. The current bit definitions for the defined modules are: mpm 0 - OK1 RED (0 off, 1 on) 1 - OK2 RED (0 off, 1 on) 2 - PS1 RED (0 off, 1 on) 3 - PS2 RED (0 off, 1 on) 4 - OK1 GRN (0 off, 1 on) 5 - OK2 GRN (0 off, 1 on) 6 - PS1 GRN (0 off, 1 on) 7 - PS2 GRN (0 off, 1 on) 8 - PRI MPM GRN (0 on, 1 off) 9 - SEC MPM GRN (0 on, 1 off) 10 - TEMP ALARM AMBER (0 on, 1 off) 11-21 - undefined 22 - HRE PRESENT (1 yes, 0 no) 23 - BUS SPEED (1 960, 0 640) 24-31 - reserved pizza 0 - OK1 RED (0 off, 1 on) 1 - OK2 RED (0 off, 1 on) 2-3 - unused 4 - OK1 GRN (0 off, 1 on) 5 - OK2 GRN (0 off, 1 on) 6 - HSM1 GRN (0 off, 1 on) 7 - HSM2 GRN (0 off, 1 on) 8-31 - reserved eni8 0 - OK1 RED (0 off, 1 on) 1 - OK2 RED (0 off, 1 on) 2 - undefined 3 - undefined 4 - OK1 GRN (0 off, 1 on) 5 - OK2 GRN (0 off, 1 on) 6 - undefined 7 - undefined 8-15 - reserved 16 - STA1 GRN 17 - STA2 GRN 18 - STA3 GRN 19 - STA4 GRN 20 - STA5 GRN 21 - STA6 GRN 22 - STA7 GRN 23 - STA8 GRN mesm8 0 - OK1 RED (0 off, 1 on) 1 - OK2 RED (0 off, 1 on) 2 - undefined 3 - undefined 4 - OK1 GRN (0 off, 1 on) 5 - OK2 GRN (0 off, 1 on) 6 - undefined 7 - undefined 8 - 1 = Full Duplex Port 1 9 - 1 = Full Duplex Port 2 10 - 1 = Full Duplex Port 3 11 - 1 = Full Duplex Port 4 12 - 1 = Full Duplex Port 5 13 - 1 = Full Duplex Port 6 14 - 1 = Full Duplex Port 7 15 - 1 = Full Duplex Port 8 16 - 1 = STA1 GRN 17 - 1 = STA2 GRN 18 - 1 = STA3 GRN 19 - 1 = STA4 GRN 20 - 1 = STA5 GRN 21 - 1 = STA6 GRN 22 - 1 = STA7 GRN 23 - 1 = STA8 GRN mesm12 0 - OK1 RED (0 off, 1 on) 1 - OK2 RED (0 off, 1 on) 2 - undefined 3 - undefined 4 - OK1 GRN (0 off, 1 on) 5 - OK2 GRN (0 off, 1 on) 6 - undefined 7 - undefined 8 - 1 = STA1 GRN 9 - 1 = STA2 GRN 10 - 1 = STA3 GRN 11 - 1 = STA4 GRN 12 - 1 = STA5 GRN 13 - 1 = STA6 GRN 14 - 1 = STA7 GRN 15 - 1 = STA8 GRN 16 - 1 = STA9 GRN 17 - 1 = STA10 GRN 18 - 1 = STA11 GRN 19 - 1 = STA12 GRN 20-23 - reserved mesm16 0 - OK1 RED (0 off, 1 on) 1 - OK2 RED (0 off, 1 on) 2 - undefined 3 - undefined 4 - OK1 GRN (0 off, 1 on) 5 - OK2 GRN (0 off, 1 on) 6 - undefined 7 - undefined 8 - 1 = STA1 GRN 9 - 1 = STA2 GRN 10 - 1 = STA3 GRN 11 - 1 = STA4 GRN 12 - 1 = STA5 GRN 13 - 1 = STA6 GRN 14 - 1 = STA7 GRN 15 - 1 = STA8 GRN 16 - 1 = STA9 GRN 17 - 1 = STA10 GRN 18 - 1 = STA11 GRN 19 - 1 = STA12 GRN 20 - 1 = STA13 GRN 21 - 1 = STA14 GRN 22 - 1 = STA15 GRN 23 - 1 = STA16 GRN eni12 0 - OK1 RED (0 off, 1 on) 1 - OK2 RED (0 off, 1 on) 2 - undefined 3 - undefined 4 - OK1 GRN (0 off, 1 on) 5 - OK2 GRN (0 off, 1 on) 6 - undefined 7 - undefined 8 - STA1 GRN (1 on, 0 off) 9 - STA2 GRN (1 on, 0 off) 10 - STA3 GRN (1 on, 0 off) 11 - STA4 GRN (1 on, 0 off) 12 - STA5 GRN (1 on, 0 off) 13 - STA6 GRN (1 on, 0 off) 14 - STA7 GRN (1 on, 0 off) 15 - STA8 GRN (1 on, 0 off) 16 - STA9 GRN (1 on, 0 off) 17 - STA10 GRN (1 on, 0 off) 18 - STA11 GRN (1 on, 0 off) 19 - STA12 GRN (1 on, 0 off) 20-31 - reserved eni16 0 - OK1 RED (0 off, 1 on) 1 - OK2 RED (0 off, 1 on) 2 - undefined 3 - undefined 4 - OK1 GRN (0 off, 1 on) 5 - OK2 GRN (0 off, 1 on) 6-7 - undefined 8 - ENB1 (1 - yes, 0 - no) 9 - ENB2 (1 - yes, 0 - no) 10 - ENB3 (1 - yes, 0 - no) 11 - ENB4 (1 - yes, 0 - no) 12 - ENB5 (1 - yes, 0 - no) 13 - ENB6 (1 - yes, 0 - no) 14 - ENB7 (1 - yes, 0 - no) 15 - ENB8 (1 - yes, 0 - no) 16 - ENB9 (1 - yes, 0 - no) 17 - ENB10 (1 - yes, 0 - no) 18 - ENB11 (1 - yes, 0 - no) 19 - ENB12 (1 - yes, 0 - no) 20 - ENB13 (1 - yes, 0 - no) 21 - ENB14 (1 - yes, 0 - no) 22 - ENB15 (1 - yes, 0 - no) 23 - ENB16 (1 - yes, 0 - no) 24-31 - reserved tni 0-11 - reserved 12 - Status_1 LED (0 = ON) 13 - Status_2 LED (0 = ON) 14 - Status_3 LED (0 = ON) 15 - Status_4 LED (0 = ON) 16 - Status_5 LED (0 = ON) 17 - Status_6 LED (0 = ON) 18 - Beacon_1 LED (0 = ON) 19 - Beacon_2 LED (0 = ON) 20 - Beacon_3 LED (0 = ON) 21 - Beacon_4 LED (0 = ON) 22 - Beacon_5 LED (0 = ON) 23 - Beacon_6 LED (0 = ON) 24-31 - undefined hsm 0 - OK1 RED (0 off, 1 on) 1 - OK2 RED (0 off, 1 on) 2 - undefined 3 - undefined 4 - OK1 GRN (0 off, 1 on) 5 - OK2 GRN (0 off, 1 on) 6-31 - reserved fddi 0-3 - reserved 4 - LINK (0 flash (DISABLED), 1 on (ENABLED)) 5 - WRAP B LED (0 on, 1 off) 6 - WRAP A LED (0 on, 1 off) 7 - THRU LED (0 on, 1 off) 8-31 - reserved cddi 0-7 - reserved 8-9 - Link LED A 00 - off, x1 - on, 10 - flash 10-11 - Link LED B 00 - off, x1 - on, 10 - flash 12-13 - Link LED C 00 - off, x1 - on, 10 - flash 14-15 - Link LED D 00 - off, x1 - on, 10 - flash 16-31 - reserved for example, the value 0xD8xx indicates Link LED A - off Link LED B - flashing Link LED C - on Link LED D - on atm 0-3 - reserved 4 - FAR END (0 on, 1 off) 5 - YELLOW ALARM LED (0 on, 1 off) 6 - RED ALARM LED (0 on, 1 off) 7 - CELL ERROR LED (0 on, 1 off) 8 - Link (1 Green, 0 off) 9-31 - reserved fesm 0-6 - reserved 6 - STA On (1 on, 0 off) 7 - STA Flash (1 Flash, 0 solid) (Not used) 8 - LINK1 On (1 on, 0 off) 9 - LINK1 Flash (1 Flash, 0 solid) (Not used) -- The following are for Copper Only 10 - LINK2 On (1 on, 0 off) 11 - LINK2 Flash (1 Flash, 0 solid) (Not used) 12 - LINK3 On (1 on, 0 off) 13 - LINK3 Flash (1 Flash, 0 solid) (Not used) 14 - LINK4 On (1 on, 0 off) 15 - LINK4 Flash (1 Flash, 0 solid) (Not used) 16 - Full Duplex (1) Half Duplex (0) 17-31 - reserved wsm 0-7 - reserved - off blink slow blink on 8-9 - STA1 00 01 10 11 10-11 - STA2 00 01 10 11 12-13 - STA3 00 01 10 11 14-15 - STA4 00 01 10 11 16-17 - STA5 00 01 10 11 18-19 - STA6 00 01 10 11 20-21 - STA7 00 01 10 11 22-23 - STA8 00 01 10 11 24-31 - reserved csm 0 - OK1 RED (0 off, 1 on) 1 - OK2 RED (0 off, 1 on) 2 - undefined 3 - undefined 4 - OK1 GRN (0 off, 1 on) 5 - OK2 GRN (0 off, 1 on) 6 - undefined 7 - undefined 8-23 - port = bit - 7; - 0 - port down, LINK OFF, RED Amber - 1 - port up, LINK Green, RED OFF 24-31 - unused cabcm 0-7 - reserved off blink on 8-9 LINK1 00 01 11 10-31 - reserved fcsm 0 - OK1 RED (0 off, 1 on) 1 - OK2 RED (0 off, 1 on) 2 - undefined 3 - undefined 4 - OK1 GRN (0 off, 1 on) 5 - OK2 GRN (0 off, 1 on) 6-31 - unused atmce2s2t, atmce2s2e 0-7 - reserved 8 - LINK1 (1 on, 0 off) 9 - ERR1 (1 on, 0 off) 10 - LINK2 (1 on, 0 off) 11 - ERR2 (1 on, 0 off) - off blink on 12-13 - STA1 00 01 11 14-15 - STA2 00 01 11 16-31 - reserved csmu 0 - OK1 RED (0 off, 1 on) 1 - OK2 RED (0 off, 1 on) 2 - undefined 3 - undefined 4 - OK1 GRN (0 off, 1 on) 5 - OK2 GRN (0 off, 1 on) 6 - undefined 7 - undefined cabds3: cabe3: 0-7 - reserved off yellow green 8-9 LINK1 00 01 11 10-11 LINK2 00 01 11 12-31 - reserved cabds1: cabe1: cabcet1: cabcee1: 0-7 - reserved off yellow green 8-9 LINK1 00 01 11 10-11 LINK2 00 01 11 12-13 LINK3 00 01 11 14-15 LINK4 00 01 11 16-31 - reserved cab4imat1: cab4imae1: cab8imat1: cab8imae1: 0-7 - reserved off yellow green 8-9 LINK1 00 01 11 10-11 LINK2 00 01 11 12-13 LINK3 00 01 11 14-15 LINK4 00 01 11 16-17 LINK5 00 01 11 18-19 LINK6 00 01 11 20-21 LINK7 00 01 11 22-23 LINK8 00 01 11 24-31 - reserved Other modules will be defined later.
OBJECT-TYPE    
  INTEGER  

chasModuleVbusTxDiscards 1.3.6.1.4.1.800.2.1.2.1.1.16
The current count of transmit VBUS buffer overruns.
OBJECT-TYPE    
  Counter  

chasModuleVbusRxDiscards 1.3.6.1.4.1.800.2.1.2.1.1.17
The current count of receive VBUS buffer overruns.
OBJECT-TYPE    
  Counter  

chasModuleLedStatusExtend 1.3.6.1.4.1.800.2.1.2.1.1.18
A octet string containing module led information
OBJECT-TYPE    
  OCTET STRING SIZE(0..20)  

chasController 1.3.6.1.4.1.800.2.1.3
OBJECT IDENTIFIER    

chasControlTable 1.3.6.1.4.1.800.2.1.3.1
A list of Module controller status. NOTE: Objects with ACCESS of read-write which are associated with configuration data which presists accross reboots are in fact only valid for the Primary MPM. If the Secondary MPM has different values this information is not available to snmp queries, nor is it possible to write to the Secondaries instance of these objects. Further, once the cconfigured data is sychronized from the Primary to the Secondary, all values set on the Primary will be those used by the Secondary after the Secondary is reset. There is no ability to change a value for the Secondary except by changinging it on the Primary and then writing the configuation of the Primary to the Secondary.
OBJECT-TYPE    
  SEQUENCE OF  
    ChasControlEntry

chasControlEntry 1.3.6.1.4.1.800.2.1.3.1.1
A controller entry containing objects for a particular controller.
OBJECT-TYPE    
  ChasControlEntry  

chasControlSlot 1.3.6.1.4.1.800.2.1.3.1.1.1
The physical slot number for this controller card. This is the same as chasModuleSlot.
OBJECT-TYPE    
  INTEGER  

chasControlState 1.3.6.1.4.1.800.2.1.3.1.1.2
Provides desired (and actual) state of the given controller module. The unknown state may be returned if the controller is not present or offline. A controller may be placed into the Primary state by writing a value of primary(3). Note that most implimentations will verify that only one controller is active; thus, setting this will automatically place all other controllers into the secondary state. A controller may be placed into the secondary state by writing a value of secondary(4). The system will ensure two modules are present and that the secondary is capable of entering the primary state.
OBJECT-TYPE    
  XylanMPMStateType  

chasControlDCEPortRate 1.3.6.1.4.1.800.2.1.3.1.1.3
This is the current (and desired) baud rate for the DCE (console) serial port 1. The power-on default rate is 9600 b/s.
OBJECT-TYPE    
  XylanSerialPortSpeed  

chasControlDCEWordSize 1.3.6.1.4.1.800.2.1.3.1.1.4
This is the current (and desired) word size for serial port 0 (DCE). The power-on default is 8 bits.
OBJECT-TYPE    
  INTEGER 7..8  

chasControlDCEStopBits 1.3.6.1.4.1.800.2.1.3.1.1.5
This is the current (and desired) number of stop bits for serial port 0 (DCE). The power-on default is 1 bit.
OBJECT-TYPE    
  INTEGER 1..2  

chasControlDCEParity 1.3.6.1.4.1.800.2.1.3.1.1.6
This is the current (and desired) parity for serial port 0 (DCE). The power-on default rate is NONE.
OBJECT-TYPE    
  XylanSerialPortParity  

chasControlDTEPortRate 1.3.6.1.4.1.800.2.1.3.1.1.7
This is the current (and desired) baud rate for the DTE (modem) serial port 0. The power-on default rate is 9600 b/s.
OBJECT-TYPE    
  XylanSerialPortSpeed  

chasControlDTEWordSize 1.3.6.1.4.1.800.2.1.3.1.1.8
This is the current (and desired) word size for serial port 1 (DTE). The power-on default is 8 bits.
OBJECT-TYPE    
  INTEGER 7..8  

chasControlDTEStopBits 1.3.6.1.4.1.800.2.1.3.1.1.9
This is the current (and desired) number of stop bits for serial port 1 (DTE). The power-on default is 1 bit.
OBJECT-TYPE    
  INTEGER 1..2  

chasControlDTEParity 1.3.6.1.4.1.800.2.1.3.1.1.10
This is the current (and desired) parity for serial port 1 (DTE). The power-on default rate is NONE.
OBJECT-TYPE    
  XylanSerialPortParity  

chasControlIPAdd 1.3.6.1.4.1.800.2.1.3.1.1.11
The IP address for this MPM and it's snmp agent.
OBJECT-TYPE    
  IpAddress  

chasControlBootCode 1.3.6.1.4.1.800.2.1.3.1.1.12
FW boot code to load on reset for this controller.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

chasControlFreeFFS 1.3.6.1.4.1.800.2.1.3.1.1.13
The current free Flash File System space.
OBJECT-TYPE    
  INTEGER  

chasControlFreeBuffers 1.3.6.1.4.1.800.2.1.3.1.1.14
The current software does not pool a specific number of buffers. Therefore this object is obsolete.
OBJECT-TYPE    
  INTEGER  

chasControlBufferUtilization 1.3.6.1.4.1.800.2.1.3.1.1.15
The current software does not pool a specific number of buffers. Therefore this object is obsolete.
OBJECT-TYPE    
  Gauge  

chasControlCPUUtilization 1.3.6.1.4.1.800.2.1.3.1.1.16
The current CPU utilization for this controller.
OBJECT-TYPE    
  Gauge  

chasControlImageSuffix 1.3.6.1.4.1.800.2.1.3.1.1.17
This character string will be used to determine which file is downloaded to the NIs to be brought up by the chassis manager. Only files with suffixes (the part of the file name following '.') matching this character string will be downloaded to NIs which are inserted into the chassis or reset. If the chassis is rebooted these files will be used for the initial NI loads. This value can only be set on the Primary MPM. If automatic synchronization is enabled and the required image files on the Secondary match those on the Primary (State is Redundant or CONFIG FB) then the value set will be copied to the Secondary after the first 5min period of no configuration updates or when a configsync is envoked.
OBJECT-TYPE    
  DisplayString SIZE(1..3)  

chasControlImageSyncStatus 1.3.6.1.4.1.800.2.1.3.1.1.18
For the Primary this means: insync(1) the files in the secondary's flash file system are the same as those in the primary's. newer(2) the files in the secondary's flash file system have a more recent date than those on the primary older(3) the files in the secondary's flash file system have an earlier date than those on the primary unknown(4)no meaningfull answer exists syncing(5)The Primary has initiated file synchronization this should be temporay - 30 minutes at most! For the Secondary the meaning or 2 and 3 are reversed If this value is SET to 1, the chassis attempts to synchronize the image files.
OBJECT-TYPE    
  XylanImageSyncStatus  

chasControlConfigSyncStatus 1.3.6.1.4.1.800.2.1.3.1.1.19
insync(1) All configuration data on the Primary is the same as that on the secondary. newer(2) The config data on the Primary MPM has been updated more recently than the config data on the secondary. (This is not a possible value if the instance is the Secondary) older(3) The config data on the Primary MPM has been updated more recently than the config data on the secondary. (This is not a possible value if the instance is the Primary) unknown(4)No meaniful response can be given. syncing(5)The Primary has initiated configuration synchronization this should be temporay 15 minutes at most! bootvalues(6) The configuration data contains the boot values. Only possible on secondary if snmp is interaction with chassis is possible If this value is SET to 1, the chassis attempts to synchronize the configuration file.
OBJECT-TYPE    
  XylanConfigSyncStatus  

chasControlConfigSyncEnable 1.3.6.1.4.1.800.2.1.3.1.1.20
enabled(1) - After changes to configuration data AND after 5 min from the last change if the image files are synced, sync synchronize the configuration data. disabled(2) - never automatically synchronize the configuration data.
OBJECT-TYPE    
  XylanConfigSyncEnable  

chasControlDCEPortMode 1.3.6.1.4.1.800.2.1.3.1.1.21
down(1) - This port is down. console(2) - This is the console port slip(3) - This is a slip port. This value can only be modified through the console/slip port
OBJECT-TYPE    
  XylanSerialPortMode  

chasControlDTEPortMode 1.3.6.1.4.1.800.2.1.3.1.1.22
down(1) - This port is down. console(2) - This is the console port slip(3) - This is a slip port. This value can only be modified through the console/slip port
OBJECT-TYPE    
  XylanSerialPortMode  

chasControlEthPortIPAddr 1.3.6.1.4.1.800.2.1.3.1.1.23
The IP network address of the Ethernet Mgmt. Port.
OBJECT-TYPE    
  IpAddress  

chasControlEthPortSubMask 1.3.6.1.4.1.800.2.1.3.1.1.24
The IP network subnet mask of the Ethernet Mgmt. Port.
OBJECT-TYPE    
  IpAddress  

chasControlEthPortBcast 1.3.6.1.4.1.800.2.1.3.1.1.25
The IP network broadcast address of the Ethernet Mgmt. Port.
OBJECT-TYPE    
  IpAddress  

chasControlEthPortGateWay 1.3.6.1.4.1.800.2.1.3.1.1.26
The IP network gateway address of the Ethernet Mgmt. Port.
OBJECT-TYPE    
  IpAddress  

chasControlEthPortRipMode 1.3.6.1.4.1.800.2.1.3.1.1.27
The RIP mode of the Ethernet Mgmt. Port.
OBJECT-TYPE    
  INTEGER silent(1), deaf(2), active(3), inactive(4)  

chasControlEthPortRemoteHost 1.3.6.1.4.1.800.2.1.3.1.1.28
The IP network remote host address of the Ethernet Mgmt. Port.
OBJECT-TYPE    
  IpAddress  

chasControlEthPortRemoteMask 1.3.6.1.4.1.800.2.1.3.1.1.29
The IP network remote host subnet mask of the Ethernet Mgmt. Port.
OBJECT-TYPE    
  IpAddress  

chasControlFFSTable 1.3.6.1.4.1.800.2.1.3.2
This table provides a file directory listing of both the primary and secondary MPMs. and provides for simple file operations.
OBJECT-TYPE    
  SEQUENCE OF  
    ChasControlFFSEntry

chasControlFFSEntry 1.3.6.1.4.1.800.2.1.3.2.1
Each entry describes as single file. Rather than use the entire file name as an instance, a checksum of the file name is used.
OBJECT-TYPE    
  ChasControlFFSEntry  

chasControlFFSFileSlot 1.3.6.1.4.1.800.2.1.3.2.1.1
Which slot, valid values are 1 and 2. If there is no Secondary MPM only one of these will be valid.
OBJECT-TYPE    
  INTEGER  

chasControlFFSFileNameCks 1.3.6.1.4.1.800.2.1.3.2.1.2
This value/instance is derived from the file name and is used to determine which file the NMS is inquiring about or operating on. The NMS must use the value given by the Switch.
OBJECT-TYPE    
  INTEGER  

chasControlFFSFileName 1.3.6.1.4.1.800.2.1.3.2.1.3
The file name.
OBJECT-TYPE    
  DisplayString SIZE(1..40)  

chasControlFFSFileSize 1.3.6.1.4.1.800.2.1.3.2.1.4
The file size: bytes of data.
OBJECT-TYPE    
  INTEGER  

chasControlFFSFileDate 1.3.6.1.4.1.800.2.1.3.2.1.5
The unix date the file was created. this is based upon number of seconds since 1/ 1/70. Files created by older versions of the bootcode alway have 1/ 1/70 00:00 as the date. If the date is incorrect on the switch the values in the file system will reflect that.
OBJECT-TYPE    
  TimeTicks  

chasControlFFSFileAction 1.3.6.1.4.1.800.2.1.3.2.1.6
none(1) No action has been requested for this file writingTo(2) can only be specified for Primary causes the specified file to be written from Primary to Secondary. deletingFrom(3) this file is being removed can be specified for files on both Primary and Secondary. readingFrom(4) can only be specified for Secondary causes the specified file to be copoed from the Secondary to the Promary. This value may be set to delete files from an MPM or copy files between the Primary and Secondary. Only one action is permitted at a time. If a SET is attempted to ANY chasControlFFSFileAction when chasControlLastFFSActionSlot is inProgress(2) the resource will be unavailable.
OBJECT-TYPE    
  XylanFFSFileAction  

chasControlFFSActionStatus 1.3.6.1.4.1.800.2.1.3.3
OBJECT IDENTIFIER    

chasControlLastFFSAction 1.3.6.1.4.1.800.2.1.3.3.1
writingTo(2) The file is being written to the Seconday. deletingFrom(3) the file is being removed from the slot indicated by chasControlLastFFSActionSlot. readingFrom(4) the file is being copied from the Secondary to the Primary. The last action that was requested from the file system. Only one action is permitted at a time. If a SET is attempted to ANY chasControlFFSFileAction when chasControlLastFFSActionSlot is inProgress(2) that resource will be unavailable.
OBJECT-TYPE    
  XylanFFSFileAction  

chasControlLastFFSActionSlot 1.3.6.1.4.1.800.2.1.3.3.2
The slot number (1/2) which combined with the action says what is really happening.
OBJECT-TYPE    
  INTEGER  

chasControlLastFFSActionFileName 1.3.6.1.4.1.800.2.1.3.3.3
The name of the file upon which the last Action is was successfully requested.
OBJECT-TYPE    
  DisplayString SIZE(1..40)  

chasControlLastFFSActionDate 1.3.6.1.4.1.800.2.1.3.3.4
The time of the last successfull set to chasControlFFSFileAction
OBJECT-TYPE    
  TimeTicks  

chasControlLastFFSActionSource 1.3.6.1.4.1.800.2.1.3.3.5
The IP address of the NMS which did the last successfull set to chasControlFFSFileAction
OBJECT-TYPE    
  IpAddress  

chasControlLastFFSActionStatus 1.3.6.1.4.1.800.2.1.3.3.6
none(1) No file action has ever been succesfully requested since boot up of this MPM. Included takeover by Secondary MPM. inProgress(2) The action described by other members of this group is still underway. successfull(3) The action described by other members of this group completed successfully. failed(4) The action described by other members of this group failed.
OBJECT-TYPE    
  XylanFFSFileActionStatus  

chasPowerSupply 1.3.6.1.4.1.800.2.1.4
OBJECT IDENTIFIER    

chasPowerSupply1State 1.3.6.1.4.1.800.2.1.4.1
The status of power supply slot 1.
OBJECT-TYPE    
  XylanPSStateType  

chasPowerSupply2State 1.3.6.1.4.1.800.2.1.4.2
The status of power supply slot 2.
OBJECT-TYPE    
  XylanPSStateType  

chasEnvmnt 1.3.6.1.4.1.800.2.1.5
OBJECT IDENTIFIER    

chasEnvrmnt1TempRange1 1.3.6.1.4.1.800.2.1.5.1
This field contains the state of the temp sensor located on the Primary MPM. This is temperature sensor 0.
OBJECT-TYPE    
  XylanTempStateType  

chasEnvrmnt1TempRange2 1.3.6.1.4.1.800.2.1.5.2
This field contains the state of the temp sensor located on the Primary MPM. This is temperature sensor 1. If the module type is mpm(5) the value returned is notPresent(2). On other MPM types a returned value of underThreshold(4) indcates that the temperature is NOT too low and overThreshold(3) indicates that the temperature IS too low.
OBJECT-TYPE    
  XylanTempStateType  

chasEnvrmnt2TempRange1 1.3.6.1.4.1.800.2.1.5.3
This field contains the state of the temp sensor located on the Secondary MPM. This is temperature sensor 0.
OBJECT-TYPE    
  XylanTempStateType  

chasEnvrmnt2TempRange2 1.3.6.1.4.1.800.2.1.5.4
This field contains the state of the temp sensor located on the Secondary MPM. This is temperature sensor 1. If there is no Secondary MPM or if the module type is mpm(5) the value returned is notPresent(2). On other MPM types a returned value of underThreshold(4) indcates that the temperature is NOT too low and overThreshold(3) indicates that the temperature IS too low.
OBJECT-TYPE    
  XylanTempStateType  

chasStatus 1.3.6.1.4.1.800.2.1.6
OBJECT IDENTIFIER    

chasXylanOpaque 1.3.6.1.4.1.800.2.1.6.1
The Xylan proprietary status structure.
OBJECT-TYPE    
  OCTET STRING SIZE(252)  

chasXylanCompaq 1.3.6.1.4.1.800.2.1.6.2
The Xylan proprietary status structure.
OBJECT-TYPE    
  OCTET STRING SIZE(310)  

chasXylanPollData 1.3.6.1.4.1.800.2.1.6.3
The third Xylan proprietary status structure.
OBJECT-TYPE    
  OCTET STRING SIZE(388)  

Defined Objects

XylanChasType  
INTEGER invalid(1), other(2), omni5(3), omni9(4), pizza(5), micro(6), omni5cell(7), omni9cell(8), omni5e(9), omni9e(10), pizport(11), omni5wx(12), omni9wx(13), omni3wx(14), os5024(15), os4016(16), os3032(17), os2032(18), os2016(19), os1032(20), os6032(21), os5032(22), xframe5(23), xframe9(24), xframe3(25), os4024(26), omnicore13(27)    

XylanModuleSubunit  
INTEGER base(1), hsm1(2), hsm2(3), csm3(4)    

XylanModuleType  
INTEGER unknown(1), invalid(2), empty(3), hsm(4), mpm(5), eni8(6), eni16(7), tni(8), fddi(9), cddi(10), x100eni(11), atm(12), eni12(13), eni6(14), mpm2(15), atmds3(16), fddis(17), atms(18), atmutp(19), esm8f(20), esm12t(21), tokf(22), atm2m(23), atm2s(24), wsm(25), wsmbri(26), hsm2(27), pizza(28), tsmcd6(29), csm(30), res31(31), hre(32), e10m(33), atme3(34), e100fsfd(35), e100fmfd(36), e100txfd(37), mpm1g(38), pizprt(39), esm32(40), fcsm(41), csmh(42), csm12s(43), csma12(44), csma24(45), p10U(46), asm2(47), puplink(48), res49(49), res50(50), fddisc2(51), atmce2s2t(52), atmce2s2e(53), atmds3ux(54), atme3ux(55), atmoc3ux(56), atmt1ux(57), atme1ux(58), wsm2s(59), wsm2snc(60), wsmprit1(61), wsmprie1(62), csm12l(63), meth12(64), meth32(65), e1008pm(66), e1008ps(67), hsm3(68), csmu(69), e12f(70), e12o(71), csm6m2s(72), atmsux(73), atm2sux(74), atm2mux(75), atmuux(76), atmshfs(77), atm2rm(78), atm2rs(79), atmsrm(80), atmsrs(81), fesmh2m(82), fesmh2s(83), fesm4(84), csm8c(85), atm2sl(86), csmfsl(87), csmsfsl(88), csm12fsl(89), pme8(90), pme32(91), p5024(92), p4016(93), p3032(94), p3032X(95), p2032(96), p2016(97), p1032(98), p1032F(99), fcsm622(100), cab155(101), cab155fsl(102), cab155c(103), cab155s(104), cabds1(105), cabds3(106), cabe1(107), cabe3(108), cabcee1(109), cabcet1(110), esxfm24(111), tsmcd16(112), tsmcd32(113), tsm1g(114), p1032cf(115), cab4imat1(116), cab4imae1(117), cab8imat1(118), cab8imae1(119), mpmc(120), mpmf(121), mpmos(122), atm2622s(123), atm2622m(124), atm2622sl(125), ptsmcd16(126), ptsmcd32(127), atm2622rfsh(128), mt12(129), esmf8(130), esmf16(131), atm155fshe(132), atm155fsh(133), pme32r(134), pme2(135), gsmfm(136), gsmfms(137), gsmfmh(138), cabt12m2(139), cabt12m1(140), cabt12s2(141), cabt12s1(142), cabt12l2(143), cabt12l1(144), cabt12c2(145), cabt12c1(146), cabt12ds32(147), cabt12ds31(148), cabt12e32(149), cabt12e31(150), cabcm(151), cabce4sp(152), esxc12(153), esxc16(154), esxc32(155), esxf16(156), gsxs2(157), gsxs4(158), gsxm2(159), gsxm4(160), gsxl2(161), gsxl4(162), tsxcd16(163), tsxcd32(164), etel24(165), atm2155mu(166), atm2155su(167), atm2155fu(168), atm2ds3u(169), atm2e3u(170), atm2t1u(171), atm2e1u(172), atm2utpu(173), pizza6032(174), pizza5032(175), gsmx1(176), esxfm12(177), esxfm24a(178), hsx(179), pizza6032x(180), pmfe32r(181), os4024g(182), os4024f(183), os4024cf(184), os4024c(185), pmfe24(186), gsmfm2(187), gsmfs2(188), esm100c32(189), m013(190), asxrfm622(191), asxrfs622(192), atm2imat1u(193), atm2imae1u(194), atmcest12(195), atmcese12(196), esx100fm12(197), esx100fs12(198), csma122(199), pfe(200), osgsmfm2(201), osgsmfs2(202), atm2ds3(203), atm2e3(204), cop(205), vsd(206), mpo(207), mpx2(208), atm2155rfmce(209), atm2ceds3x(210), atm2155fmx(211), atm2155fsx(212), atm2155flx(213), atm2155rsx(214), atm2155rlx(215), gso6(216), os6000(217), os6032e(218), oa408(219), oa512(220), oa512u(221), ocmbpc(222), ocd12cmid(223), hsxh(224)    

XylanMPMStateType  
INTEGER unknown(1), invalid(2), primary(3), secondary(4)    

XylanPSStateType  
INTEGER unknown(1), notPresent(2), okay(3), bad(4)    

XylanTempStateType  
INTEGER unknown(1), notPresent(2), overThreshold(3), underThreshold(4)    

XylanImageSyncStatus  
INTEGER insync(1), newer(2), older(3), unknown(4), syncing(5)    

XylanConfigSyncStatus  
INTEGER insync(1), newer(2), older(3), unknown(4), syncing(5), bootvalues(6)    

XylanConfigSyncEnable  
INTEGER enabled(1), disabled(2)    

XylanFFSFileAction  
INTEGER none(1), writingTo(2), deletingFrom(3), readingFrom(4)    

XylanFFSFileActionStatus  
INTEGER none(1), inProgress(2), successfull(3), failed(4)    

XylanSerialPortSpeed  
INTEGER unknown(1), invalid(2), b1200(3), b9600(4), b19200(5), b38400(6)    

XylanSerialPortParity  
INTEGER unknown(1), none(2), even(3), odd(4)    

XylanSerialPortMode  
INTEGER down(1), console(2), slip(3)    

ChasModuleEntry  
SEQUENCE    
  INTEGER as chasModuleSlot  
  XylanModuleSubunit as chasModuleSubUnit  
  XylanModuleType as chasModuleType  
  DisplayString as chasModulePartNum  
  DisplayString as chasModuleDescription  
  INTEGER as chasModuleHwRevision  
  INTEGER as chasModuleHwModLevel  
  DisplayString as chasModuleSerialNumber  
  DisplayString as chasModuleMfgDate  
  DisplayString as chasModuleFwVersion  
  MacAddress as chasModuleBaseMacAddress  
  TimeTicks as chasModuleTimeStamp  
  INTEGER as chasModuleAdminStatus  
  INTEGER as chasModuleOperStatus  
  INTEGER as chasModuleLedStatus  
  Counter as chasModuleVbusTxDiscards  
  Counter as chasModuleVbusRxDiscards  
  OCTET STRING as chasModuleLedStatusExtend  

ChasControlEntry  
SEQUENCE    
  INTEGER as chasControlSlot  
  XylanMPMStateType as chasControlState  
  XylanSerialPortSpeed as chasControlDCEPortRate  
  INTEGER as chasControlDCEWordSize  
  INTEGER as chasControlDCEStopBits  
  XylanSerialPortParity as chasControlDCEParity  
  XylanSerialPortSpeed as chasControlDTEPortRate  
  INTEGER as chasControlDTEWordSize  
  INTEGER as chasControlDTEStopBits  
  XylanSerialPortParity as chasControlDTEParity  
  IpAddress as chasControlIPAdd  
  DisplayString as chasControlBootCode  
  INTEGER as chasControlFreeFFS  
  INTEGER as chasControlFreeBuffers  
  Gauge as chasControlBufferUtilization  
  Gauge as chasControlCPUUtilization  
  DisplayString as chasControlImageSuffix  
  XylanImageSyncStatus as chasControlImageSyncStatus  
  XylanConfigSyncStatus as chasControlConfigSyncStatus  
  XylanConfigSyncEnable as chasControlConfigSyncEnable  
  XylanSerialPortMode as chasControlDCEPortMode  
  XylanSerialPortMode as chasControlDTEPortMode  
  IpAddress as chasControlEthPortIPAddr  
  IpAddress as chasControlEthPortSubMask  
  IpAddress as chasControlEthPortBcast  
  IpAddress as chasControlEthPortGateWay  
  INTEGER as chasControlEthPortRipMode  
  IpAddress as chasControlEthPortRemoteHost  
  IpAddress as chasControlEthPortRemoteMask  

ChasControlFFSEntry  
SEQUENCE    
  INTEGER as chasControlFFSFileSlot  
  INTEGER as chasControlFFSFileNameCks  
  DisplayString as chasControlFFSFileName  
  INTEGER as chasControlFFSFileSize  
  TimeTicks as chasControlFFSFileDate  
  XylanFFSFileAction as chasControlFFSFileAction  

XylanModPortTypes  
INTEGER unknown(1), invalid(2), empty(3), serial(4), ethutp(5), xmpt6(6), ethaui(7), ethbnc(8), ethfiorl(9), tok(10), xmpt11(11), fsas(12), fdas(13), xmpt14(14), cdas(15), xmpt16(16), atm(17), oc12(18), xmpt19(19), xmpt20(20), tokfbr(21), irp(22), fdxaui(23), fdxaui2(24), t1(25), e1(26), e3(27), usp(28), isdnbri(29), e100baset(30), atmds1(31), tok100(32), e100basef(33), egigfm(34), egigfms(35), egigfmh(36)