CISCO-ATM-CELL-LAYER-MIB

File: CISCO-ATM-CELL-LAYER-MIB.mib (64675 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
IF-MIB CISCO-SMI

Imported symbols

MODULE-IDENTITY Counter32 Counter64
Integer32 OBJECT-TYPE Gauge32
Unsigned32 MODULE-COMPLIANCE OBJECT-GROUP
TruthValue ifIndex ciscoMgmt

Defined Objects

ciscoAtmCellLayerMIB 1.3.6.1.4.1.9.9.133
The MIB module to describe ATM cell layer objects and statistics of a physical line.
MODULE-IDENTITY    

ciscoAtmCellLayerMIBObjects 1.3.6.1.4.1.9.9.133.1
OBJECT IDENTIFIER    

caclConfig 1.3.6.1.4.1.9.9.133.1.1
OBJECT IDENTIFIER    

caclConfigTable 1.3.6.1.4.1.9.9.133.1.1.1
The Atm cell layer configuration table. An entry in this table is automatically created for each entry in the ifTable which has an ifType of atm(37), and which is layered on top of a SONET,DS3 or DS1 interface on the ATM switch.
OBJECT-TYPE    
  SEQUENCE OF  
    CaclConfigEntry

caclConfigEntry 1.3.6.1.4.1.9.9.133.1.1.1.1
An entry in the caclConfigTable. The table is indexed by the ifIndex of the atm(37) interface.
OBJECT-TYPE    
  CaclConfigEntry  

caclNullCellHeader 1.3.6.1.4.1.9.9.133.1.1.1.1.1
The first four bytes of the ATM header to be used for Null cells. Generally, idle cells are inserted into a cell stream as a mechanism for rate adaptation between the ATM data link layer and the physical layer. The header fields: Generic flow control,Payload type and Cell Loss Priority can be specified in the value of this object. It applies to both transmitted as well as received cells.
OBJECT-TYPE    
  OCTET STRING SIZE(4)  

caclNullCellPayload 1.3.6.1.4.1.9.9.133.1.1.1.1.2
Null cell Payload definition. The idle cell information field can be specified in this object. It applies to both transmitted as well as received cells. The default value is 0x6A.
OBJECT-TYPE    
  Unsigned32 0..255  

caclHecCosetEnable 1.3.6.1.4.1.9.9.133.1.1.1.1.3
If enabled, the algorithm of Coset Polynomial Addition is applied to do header error check calculations. It applies to transmitted as well as received cells.
OBJECT-TYPE    
  TruthValue  

caclPayloadScramblingEnable 1.3.6.1.4.1.9.9.133.1.1.1.1.4
An indication of whether Payload Scrambling is enabled.
OBJECT-TYPE    
  TruthValue  

caclTimeElapsed 1.3.6.1.4.1.9.9.133.1.1.1.1.5
The number of seconds that have elapsed since the beginning of the near end current error- measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.
OBJECT-TYPE    
  INTEGER 0..899  

caclValidIntervals 1.3.6.1.4.1.9.9.133.1.1.1.1.6
The number of previous near end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15 minute near end intervals since the interface has been online. In the case where the agent is a proxy, it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.
OBJECT-TYPE    
  INTEGER 0..96  

caclInvalidIntervals 1.3.6.1.4.1.9.9.133.1.1.1.1.7
The number of near end intervals in the range from 0 to caclValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).
OBJECT-TYPE    
  INTEGER 0..96  

caclStats 1.3.6.1.4.1.9.9.133.1.2
OBJECT IDENTIFIER    

caclStatsTable 1.3.6.1.4.1.9.9.133.1.2.1
The ATM Cell layer stats table is for the cell layer over a physical line. There is an entry for each SONET, DS3 or DS1 line. The table maintains objects that apply to ATM end-systems, as well as objects that apply only to ATM switches. In all the following descriptions of objects, CLP-0 means Cell Loss Priority = 0, and CLP-1 means Cell Loss Priority = 1. ATM cells with CLP=0 have a higher priority in regard to cell loss than ATM cells with CLP=1. Therefore, during resource congestions, CLP=1 cells are dropped before any CLP=0 cell is dropped. Ingress direction means coming from network to the switch. Egress direction means going from switch to the network.
OBJECT-TYPE    
  SEQUENCE OF  
    CaclStatsEntry

caclStatsEntry 1.3.6.1.4.1.9.9.133.1.2.1.1
An entry for the ATM Cell layer statistics for a physical line. These are realtime statistics which are collected per cell layer over a physical line. Entries are created automatically for each line. The table is indexed by the ifIndex value of the atm(37) interface.
OBJECT-TYPE    
  CaclStatsEntry  

caclInRcvCLP0Cells 1.3.6.1.4.1.9.9.133.1.2.1.1.1
The number of cells received on the interface with CLP0 bit set.
OBJECT-TYPE    
  Counter32  

caclInRcvCLP1Cells 1.3.6.1.4.1.9.9.133.1.2.1.1.2
The number of cells received on the interface with CLP1 bit set.
OBJECT-TYPE    
  Counter32  

caclInValidOAMCells 1.3.6.1.4.1.9.9.133.1.2.1.1.3
The number of valid Operation and Maintainance(OAM) cells received on the interface.
OBJECT-TYPE    
  Counter32  

caclInErrOAMCells 1.3.6.1.4.1.9.9.133.1.2.1.1.4
The number of errored OAM cells received on the interface.
OBJECT-TYPE    
  Counter32  

caclInGfcCells 1.3.6.1.4.1.9.9.133.1.2.1.1.5
The number of non-zero GFC cells received on the interface.
OBJECT-TYPE    
  Counter32  

caclInVpiVciErrCells 1.3.6.1.4.1.9.9.133.1.2.1.1.6
The number of cells received from the interface with unknown Vpi/Vci values.
OBJECT-TYPE    
  Counter32  

caclInLastUnknVpi 1.3.6.1.4.1.9.9.133.1.2.1.1.7
The last unknown Vpi value. This object is valid only if 'caclInVpiVciErrCells' is non-zero.
OBJECT-TYPE    
  Integer32 0..4095  

caclInLastUnknVci 1.3.6.1.4.1.9.9.133.1.2.1.1.8
The last unknown Vci value. This object is valid only if 'caclInVpiVciErrCells' is non-zero.
OBJECT-TYPE    
  Integer32 0..65535  

caclInXmtCLP0Cells 1.3.6.1.4.1.9.9.133.1.2.1.1.9
The number of CLP0 cells received from the interface and transmitted to the switch fabric.
OBJECT-TYPE    
  Counter32  

caclInXmtCLP1Cells 1.3.6.1.4.1.9.9.133.1.2.1.1.10
The number of CLP1 cells received from the interface and transmitted to the switch fabric.
OBJECT-TYPE    
  Counter32  

caclInValidRMCells 1.3.6.1.4.1.9.9.133.1.2.1.1.11
The number of Valid RM cells received from the interface.
OBJECT-TYPE    
  Counter32  

caclInRcvIdleCells 1.3.6.1.4.1.9.9.133.1.2.1.1.12
The number of idle cells received from the interface.
OBJECT-TYPE    
  Counter32  

caclInHecErrDiscCells 1.3.6.1.4.1.9.9.133.1.2.1.1.13
Header Error Check (HEC) calculation is used to provide error detection and correction from the ATM cell header. This object is the number of received cells which were discarded because they had HEC errors.
OBJECT-TYPE    
  Counter32  

caclInHecErrCorrectedCells 1.3.6.1.4.1.9.9.133.1.2.1.1.14
The number of received cells which had HEC errors that were corrected.
OBJECT-TYPE    
  Counter32  

caclInUpcCLP0DiscCells 1.3.6.1.4.1.9.9.133.1.2.1.1.15
In order to allocate resources fairly among different users, networks police traffic at resource access points. The traffic enforcement or policing taken at a UNI is called Usage Parameter Control (UPC). This is the counter associated with the number of CLP0 cells discarded due to policing.
OBJECT-TYPE    
  Counter32  

caclInUpcTotalDiscCells 1.3.6.1.4.1.9.9.133.1.2.1.1.16
The total number of cells(CLP0+1) discarded due to policing.
OBJECT-TYPE    
  Counter32  

caclInUpcTotalNonCompCells 1.3.6.1.4.1.9.9.133.1.2.1.1.17
The number of non-compliant cells (cells that are not compliant to a specific traffic profile) discarded due to policing.
OBJECT-TYPE    
  Counter32  

caclOutXmtCLP0Cells 1.3.6.1.4.1.9.9.133.1.2.1.1.18
The number of CLP0 cells transmitted to interface.
OBJECT-TYPE    
  Counter32  

caclOutXmtCLP1Cells 1.3.6.1.4.1.9.9.133.1.2.1.1.19
The number of CLP1 cells transmitted to interface.
OBJECT-TYPE    
  Counter32  

caclOutValidOAMCells 1.3.6.1.4.1.9.9.133.1.2.1.1.20
The number of Operartion and Maintainance(OAM) cells received by the interface from the switch fabric.
OBJECT-TYPE    
  Counter32  

caclOutErrOAMCells 1.3.6.1.4.1.9.9.133.1.2.1.1.21
The number of errored OAM cells received by the interface from the switch fabric.
OBJECT-TYPE    
  Counter32  

caclOutVpiVciErrCells 1.3.6.1.4.1.9.9.133.1.2.1.1.22
The number of cells with unknown vpi vci value in received by the interface from the switch fabric.
OBJECT-TYPE    
  Counter32  

caclOutRcvCLP0Cells 1.3.6.1.4.1.9.9.133.1.2.1.1.23
The number of CLP0 cells received by the interface from the switch fabric.
OBJECT-TYPE    
  Counter32  

caclOutRcvCLP1Cells 1.3.6.1.4.1.9.9.133.1.2.1.1.24
The number of CLP1 cells received by the interface from the switch fabric.
OBJECT-TYPE    
  Counter32  

caclOutRcvValidRMCells 1.3.6.1.4.1.9.9.133.1.2.1.1.25
The number of Valid RM cells received by the interface from the switch fabric.
OBJECT-TYPE    
  Counter32  

caclOutRcvIdleCells 1.3.6.1.4.1.9.9.133.1.2.1.1.26
The number of idle cells received by the interface from the switch fabric.
OBJECT-TYPE    
  Counter32  

caclHInRcvCLP0Cells 1.3.6.1.4.1.9.9.133.1.2.1.1.27
The 64-bit version of caclInRcvCLP0Cells.
OBJECT-TYPE    
  Counter64  

caclHInRcvCLP1Cells 1.3.6.1.4.1.9.9.133.1.2.1.1.28
The 64-bit version of caclnRcvCLP1Cells.
OBJECT-TYPE    
  Counter64  

caclHOutXmtCLP0Cells 1.3.6.1.4.1.9.9.133.1.2.1.1.29
The 64-bit version of caclOutXmtCLP0Cells.
OBJECT-TYPE    
  Counter64  

caclHOutXmtCLP1Cells 1.3.6.1.4.1.9.9.133.1.2.1.1.30
The 64-bit version of caclOutXmtCLP1Cells.
OBJECT-TYPE    
  Counter64  

caclHighInRcvCLP0Cells 1.3.6.1.4.1.9.9.133.1.2.1.1.31
The upper 32 bit of the number of cells received on the interface with CLP0 bit set.
OBJECT-TYPE    
  Counter32  

caclHighInRcvCLP1Cells 1.3.6.1.4.1.9.9.133.1.2.1.1.32
The upper 32 bit of the number of cells received on the interface with CLP1 bit set.
OBJECT-TYPE    
  Counter32  

caclHighInValidOAMCells 1.3.6.1.4.1.9.9.133.1.2.1.1.33
The upper 32 bit of the number of valid Operation and Maintainance(OAM) cells received on the interface.
OBJECT-TYPE    
  Counter32  

caclHighInVpiVciErrCells 1.3.6.1.4.1.9.9.133.1.2.1.1.34
The upper 32 bit of the number of cells received from the interface with unknown Vpi/Vci values.
OBJECT-TYPE    
  Counter32  

caclHighInXmtCLP0Cells 1.3.6.1.4.1.9.9.133.1.2.1.1.35
The upper 32 bit of the number of CLP0 cells received from the interface and transmitted to the switch fabric.
OBJECT-TYPE    
  Counter32  

caclHighInXmtCLP1Cells 1.3.6.1.4.1.9.9.133.1.2.1.1.36
The upper 32 bit of the number of CLP1 cells received from the interface and transmitted to the switch fabric.
OBJECT-TYPE    
  Counter32  

caclHighInHecErrDiscCells 1.3.6.1.4.1.9.9.133.1.2.1.1.37
Header Error Check (HEC) calculation is used to provide error detection and correction from the ATM cell header. This object is the upper 32 bit of the number of received cells which were discarded because they had HEC errors.
OBJECT-TYPE    
  Counter32  

caclHighInHecErrCorrectedCells 1.3.6.1.4.1.9.9.133.1.2.1.1.38
The upper 32 bit of the number of received cells which had HEC errors that were corrected.
OBJECT-TYPE    
  Counter32  

caclHighOutXmtCLP0Cells 1.3.6.1.4.1.9.9.133.1.2.1.1.39
The upper 32 bit of the number of CLP0 cells transmitted to interface.
OBJECT-TYPE    
  Counter32  

caclHighOutXmtCLP1Cells 1.3.6.1.4.1.9.9.133.1.2.1.1.40
The upper 32 bit of the number of CLP1 cells transmitted to interface.
OBJECT-TYPE    
  Counter32  

caclHighOutValidOAMCells 1.3.6.1.4.1.9.9.133.1.2.1.1.41
The upper 32 bit of the number of Operartion and Maintainance(OAM) cells received by the interface from the switch fabric.
OBJECT-TYPE    
  Counter32  

caclHighOutRcvCLP0Cells 1.3.6.1.4.1.9.9.133.1.2.1.1.42
The upper 32 bit of the number of CLP0 cells received by the interface from the switch fabric.
OBJECT-TYPE    
  Counter32  

caclHighOutRcvCLP1Cells 1.3.6.1.4.1.9.9.133.1.2.1.1.43
The upper 32 bit of the number of CLP1 cells received by the interface from the switch fabric.
OBJECT-TYPE    
  Counter32  

caclIntervalStatsTable 1.3.6.1.4.1.9.9.133.1.2.2
The ATM Cell layer interval stats table. This table contains statistics for the current (incomplete) interval and upto 96 previous (completed) 15-minute intervals.
OBJECT-TYPE    
  SEQUENCE OF  
    CaclIntervalStatsEntry

caclIntervalStatsEntry 1.3.6.1.4.1.9.9.133.1.2.2.1
An entry for the ATM Cell layer interval statistics for a physical line. Entries are created automatically for each line. The table is indexed by the ifIndex and interval number. Interval number 0 is the current interval being collected.
OBJECT-TYPE    
  CaclIntervalStatsEntry  

caclIntervalNumber 1.3.6.1.4.1.9.9.133.1.2.2.1.1
A number between 0 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 1. 0 means the current interval being collected.
OBJECT-TYPE    
  INTEGER 0..96  

caclIntervalInRcvCLP0Cells 1.3.6.1.4.1.9.9.133.1.2.2.1.2
The number of cells received on the interface with CLP0 bit set during 15 minute interval.
OBJECT-TYPE    
  Gauge32  

caclIntervalInRcvCLP1Cells 1.3.6.1.4.1.9.9.133.1.2.2.1.3
The number of cells received on the interface with CLP1 bit set during 15 minute interval.
OBJECT-TYPE    
  Gauge32  

caclIntervalInValidOAMCells 1.3.6.1.4.1.9.9.133.1.2.2.1.4
The number of valid Operation and Maintainance(OAM) cells received on the interface during 15 minute interval.
OBJECT-TYPE    
  Gauge32  

caclIntervalInErrOAMCells 1.3.6.1.4.1.9.9.133.1.2.2.1.5
The number of errored OAM cells received on the interface during 15 minute interval.
OBJECT-TYPE    
  Gauge32  

caclIntervalInGfcCells 1.3.6.1.4.1.9.9.133.1.2.2.1.6
The number of non-zero GFC cells received on the interface during 15 minute interval.
OBJECT-TYPE    
  Gauge32  

caclIntervalInVpiVciErrCells 1.3.6.1.4.1.9.9.133.1.2.2.1.7
The number of cells received from the interface with unknown Vpi/Vci values during 15 minute interval.
OBJECT-TYPE    
  Gauge32  

caclIntervalInLastUnknVpi 1.3.6.1.4.1.9.9.133.1.2.2.1.8
The last unknown Vpi value during 15 minute interval. This object is valid only if the value of 'caclIntervalInVpiVciErrCells' for the same interval is non-zero.
OBJECT-TYPE    
  Integer32 0..4095  

caclIntervalInLastUnknVci 1.3.6.1.4.1.9.9.133.1.2.2.1.9
The last unknown Vci value during 15 minute interval. This object is valid only if the value of 'caclIntervalInVpiVciErrCells' for the same interval is non-zero.
OBJECT-TYPE    
  Integer32 0..65535  

caclIntervalInXmtCLP0Cells 1.3.6.1.4.1.9.9.133.1.2.2.1.10
The number of CLP0 cells received from the interface and transmitted to the switch fabric during 15 minute interval.
OBJECT-TYPE    
  Gauge32  

caclIntervalInXmtCLP1Cells 1.3.6.1.4.1.9.9.133.1.2.2.1.11
The number of CLP1 cells received from the interface and transmitted to the switch fabric during 15 minute interval.
OBJECT-TYPE    
  Gauge32  

caclIntervalInValidRMCells 1.3.6.1.4.1.9.9.133.1.2.2.1.12
The number of Valid RM cells received from the interface during 15 minute interval.
OBJECT-TYPE    
  Gauge32  

caclIntervalInRcvIdleCells 1.3.6.1.4.1.9.9.133.1.2.2.1.13
The number of idle cells received from the interface during 15 minute interval.
OBJECT-TYPE    
  Gauge32  

caclIntervalInHecErrDiscCells 1.3.6.1.4.1.9.9.133.1.2.2.1.14
This object is the number of received cells which were discarded because they had HEC errors during 15 minute interval.
OBJECT-TYPE    
  Gauge32  

caclIntervalInHecErrCorrCells 1.3.6.1.4.1.9.9.133.1.2.2.1.15
The number of received cells which had HEC errors that were corrected during 15 minute interval.
OBJECT-TYPE    
  Gauge32  

caclIntervalInUpcCLP0DiscCells 1.3.6.1.4.1.9.9.133.1.2.2.1.16
This is the counter associated with the number of CLP0 cells discarded due to policing during 15 minute interval.
OBJECT-TYPE    
  Gauge32  

caclIntervalInUpcTotalDiscCells 1.3.6.1.4.1.9.9.133.1.2.2.1.17
The total number of cells(CLP0+1) discarded due to policing during 15 minute interval.
OBJECT-TYPE    
  Gauge32  

caclIntervalInUpcTotNonCmpCells 1.3.6.1.4.1.9.9.133.1.2.2.1.18
The number of non-compliant cells (cells that are not compliant to a specific traffic profile) discarded due to policing during 15 minute interval.
OBJECT-TYPE    
  Gauge32  

caclIntervalOutXmtCLP0Cells 1.3.6.1.4.1.9.9.133.1.2.2.1.19
The number of CLP0 cells transmitted to interface during 15 minute interval.
OBJECT-TYPE    
  Gauge32  

caclIntervalOutXmtCLP1Cells 1.3.6.1.4.1.9.9.133.1.2.2.1.20
The number of CLP1 cells transmitted to interface during 15 minute interval.
OBJECT-TYPE    
  Gauge32  

caclIntervalOutValidOAMCells 1.3.6.1.4.1.9.9.133.1.2.2.1.21
The number of Operartion and Maintainance(OAM) cells received by the interface from the switch fabric during 15 minute interval.
OBJECT-TYPE    
  Gauge32  

caclIntervalOutErrOAMCells 1.3.6.1.4.1.9.9.133.1.2.2.1.22
The number of errored OAM cells received by the interface from the switch fabric during 15 minute interval.
OBJECT-TYPE    
  Gauge32  

caclIntervalOutVpiVciErrCells 1.3.6.1.4.1.9.9.133.1.2.2.1.23
The number of cells with unknown vpi vci value in received by the interface from the switch fabric during 15 minute interval.
OBJECT-TYPE    
  Gauge32  

caclIntervalOutRcvCLP0Cells 1.3.6.1.4.1.9.9.133.1.2.2.1.24
The number of CLP0 cells received by the interface from the switch fabric during 15 minute interval.
OBJECT-TYPE    
  Gauge32  

caclIntervalOutRcvCLP1Cells 1.3.6.1.4.1.9.9.133.1.2.2.1.25
The number of CLP1 cells received by the interface from the switch fabric during 15 minute interval.
OBJECT-TYPE    
  Gauge32  

caclIntervalOutRcvValidRMCells 1.3.6.1.4.1.9.9.133.1.2.2.1.26
The number of Valid RM cells received by the interface from the switch fabric during 15 minute interval.
OBJECT-TYPE    
  Gauge32  

caclIntervalOutRcvIdleCells 1.3.6.1.4.1.9.9.133.1.2.2.1.27
The number of idle cells received by the interface from the switch fabric during 15 minute interval.
OBJECT-TYPE    
  Gauge32  

caclHighIntervalInRcvCLP0Cells 1.3.6.1.4.1.9.9.133.1.2.2.1.28
The Upper 32 bit of the number of cells received on the interface with CLP0 bit set during 15 minute interval.
OBJECT-TYPE    
  Gauge32  

caclHighIntervalInRcvCLP1Cells 1.3.6.1.4.1.9.9.133.1.2.2.1.29
The Upper 32 bit of the number of cells received on the interface with CLP1 bit set during 15 minute interval.
OBJECT-TYPE    
  Gauge32  

caclHighIntervalInVpiVciErrCells 1.3.6.1.4.1.9.9.133.1.2.2.1.30
The Upper 32 bit of the number of cells received from the interface with unknown Vpi/Vci values during 15 minute interval.
OBJECT-TYPE    
  Gauge32  

caclHighIntervalInXmtCLP0Cells 1.3.6.1.4.1.9.9.133.1.2.2.1.31
The Upper 32 bit of the number of CLP0 cells received from the interface and transmitted to the switch fabric during 15 minute interval.
OBJECT-TYPE    
  Gauge32  

caclHighIntervalInXmtCLP1Cells 1.3.6.1.4.1.9.9.133.1.2.2.1.32
The Upper 32 bit of the number of CLP1 cells received from the interface and transmitted to the switch fabric during 15 minute interval.
OBJECT-TYPE    
  Gauge32  

caclHighIntervalInHecErrDiscCells 1.3.6.1.4.1.9.9.133.1.2.2.1.33
This object is the Upper 32 bit of the number of received cells which were discarded because they had HEC errors during 15 minute interval.
OBJECT-TYPE    
  Gauge32  

caclHighIntervalInHecErrCorrCells 1.3.6.1.4.1.9.9.133.1.2.2.1.34
The number of received cells which had HEC errors that were corrected during 15 minute interval.
OBJECT-TYPE    
  Gauge32  

caclHighIntervalOutXmtCLP0Cells 1.3.6.1.4.1.9.9.133.1.2.2.1.35
The number of CLP0 cells transmitted to interface during 15 minute interval.
OBJECT-TYPE    
  Gauge32  

caclHighIntervalOutXmtCLP1Cells 1.3.6.1.4.1.9.9.133.1.2.2.1.36
The number of CLP1 cells transmitted to interface during 15 minute interval.
OBJECT-TYPE    
  Gauge32  

caclHighIntervalOutVpiVciErrCells 1.3.6.1.4.1.9.9.133.1.2.2.1.37
The number of cells with unknown vpi vci value in received by the interface from the switch fabric during 15 minute interval.
OBJECT-TYPE    
  Gauge32  

caclHighIntervalOutRcvCLP0Cells 1.3.6.1.4.1.9.9.133.1.2.2.1.38
The number of CLP0 cells received by the interface from the switch fabric during 15 minute interval.
OBJECT-TYPE    
  Gauge32  

caclHighIntervalOutRcvCLP1Cells 1.3.6.1.4.1.9.9.133.1.2.2.1.39
The number of CLP1 cells received by the interface from the switch fabric during 15 minute interval.
OBJECT-TYPE    
  Gauge32  

caclXStatsTable 1.3.6.1.4.1.9.9.133.1.2.3
The ATM Cell layer stats table is for the cell layer over a physical line. There is an entry for each SONET, DS3 or DS1 line. The table maintains objects that apply to ATM end-systems, as well as objects that apply only to ATM switches. In all the following descriptions of objects, CLP-0 means Cell Loss Priority = 0, and CLP-1 means Cell Loss Priority = 1. ATM cells with CLP=0 have a higher priority in regard to cell loss than ATM cells with CLP=1. Therefore, during resource congestions, CLP=1 cells are dropped before any CLP=0 cell is dropped. Ingress direction means coming from network to the switch. Egress direction means going from switch to the network.
OBJECT-TYPE    
  SEQUENCE OF  
    CaclXStatsEntry

caclXStatsEntry 1.3.6.1.4.1.9.9.133.1.2.3.1
An entry for the ATM Cell layer statistics for a physical line. These are realtime statistics which are collected per cell layer over a physical line. Entries are created automatically for each line. The table is indexed by the ifIndex value of the atm(37) interface.
OBJECT-TYPE    
  CaclXStatsEntry  

caclHCInValidOAMCells 1.3.6.1.4.1.9.9.133.1.2.3.1.1
The 64 bit version of the number of valid Operation and Maintainance(OAM) cells received on the interface.
OBJECT-TYPE    
  Counter64  

caclHCInVpiVciErrCells 1.3.6.1.4.1.9.9.133.1.2.3.1.2
The 64 bit version of the number of cells received from the interface with unknown Vpi/Vci values.
OBJECT-TYPE    
  Counter64  

caclHCInXmtCLP0Cells 1.3.6.1.4.1.9.9.133.1.2.3.1.3
The 64 bit version of the number of CLP0 cells received from the interface and transmitted to the switch fabric.
OBJECT-TYPE    
  Counter64  

caclHCInXmtCLP1Cells 1.3.6.1.4.1.9.9.133.1.2.3.1.4
The 64 bit version of the number of CLP1 cells received from the interface and transmitted to the switch fabric.
OBJECT-TYPE    
  Counter64  

caclHCInHecErrDiscCells 1.3.6.1.4.1.9.9.133.1.2.3.1.5
Header Error Check (HEC) calculation is used to provide error detection and correction from the ATM cell header. This object is 64 bit version of the the number of received cells which were discarded because they had HEC errors.
OBJECT-TYPE    
  Counter64  

caclHCInHecErrCorrectedCells 1.3.6.1.4.1.9.9.133.1.2.3.1.6
The 64 bit version of thenumber of received cells which had HEC errors that were corrected.
OBJECT-TYPE    
  Counter64  

caclHCOutValidOAMCells 1.3.6.1.4.1.9.9.133.1.2.3.1.7
The 64 bit version of the number of Operartion and Maintainance(OAM) cells received by the interface from the switch fabric.
OBJECT-TYPE    
  Counter64  

caclHCOutRcvCLP0Cells 1.3.6.1.4.1.9.9.133.1.2.3.1.8
The 64 bit version of the number of CLP0 cells received by the interface from the switch fabric.
OBJECT-TYPE    
  Counter64  

caclHCOutRcvCLP1Cells 1.3.6.1.4.1.9.9.133.1.2.3.1.9
The 64 bit version of the number of CLP1 cells received by the interface from the switch fabric.
OBJECT-TYPE    
  Counter64  

caclXIntervalStatsTable 1.3.6.1.4.1.9.9.133.1.2.4
The ATM Cell layer interval stats table. This table contains statistics for the current (incomplete) interval and upto 96 previous (completed) 15-minute intervals.
OBJECT-TYPE    
  SEQUENCE OF  
    CaclXIntervalStatsEntry

caclXIntervalStatsEntry 1.3.6.1.4.1.9.9.133.1.2.4.1
An entry for the ATM Cell layer interval statistics for a physical line. Entries are created automatically for each line. The table is indexed by the ifIndex and interval number. Interval number 0 is the current interval being collected.
OBJECT-TYPE    
  CaclXIntervalStatsEntry  

caclHCIntervalInRcvCLP0Cells 1.3.6.1.4.1.9.9.133.1.2.4.1.1
The 64 bit version of the number of cells received on the interface with CLP0 bit set during 15 minute interval.
OBJECT-TYPE    
  Counter64  

caclHCIntervalInRcvCLP1Cells 1.3.6.1.4.1.9.9.133.1.2.4.1.2
The 64 bit version of the number of cells received on the interface with CLP1 bit set during 15 minute interval.
OBJECT-TYPE    
  Counter64  

caclHCIntervalInVpiVciErrCells 1.3.6.1.4.1.9.9.133.1.2.4.1.3
The 64 bit version of the number of cells received from the interface with unknown Vpi/Vci values during 15 minute interval.
OBJECT-TYPE    
  Counter64  

caclHCIntervalInXmtCLP0Cells 1.3.6.1.4.1.9.9.133.1.2.4.1.4
The 64 bit version of the number of CLP0 cells received from the interface and transmitted to the switch fabric during 15 minute interval.
OBJECT-TYPE    
  Counter64  

caclHCIntervalInXmtCLP1Cells 1.3.6.1.4.1.9.9.133.1.2.4.1.5
The 64 bit version of the number of CLP1 cells received from the interface and transmitted to the switch fabric during 15 minute interval.
OBJECT-TYPE    
  Counter64  

caclHCIntervalInHecErrDiscCells 1.3.6.1.4.1.9.9.133.1.2.4.1.6
This object is the 64 bit version of the number of received cells which were discarded because they had HEC errors during 15 minute interval.
OBJECT-TYPE    
  Counter64  

caclHCIntervalInHecErrCorrCells 1.3.6.1.4.1.9.9.133.1.2.4.1.7
The 64 bit version of the number of received cells which had HEC errors that were corrected during 15 minute interval.
OBJECT-TYPE    
  Counter64  

caclHCIntervalOutXmtCLP0Cells 1.3.6.1.4.1.9.9.133.1.2.4.1.8
The 64 bit version of the number of CLP0 cells transmitted to interface during 15 minute interval.
OBJECT-TYPE    
  Counter64  

caclHCIntervalOutXmtCLP1Cells 1.3.6.1.4.1.9.9.133.1.2.4.1.9
The 64 bit version of the number of CLP1 cells transmitted to interface during 15 minute interval.
OBJECT-TYPE    
  Counter64  

caclHCIntervalOutVpiVciErrCells 1.3.6.1.4.1.9.9.133.1.2.4.1.10
The 64 bit version of the number of cells with unknown vpi vci value in received by the interface from the switch fabric during 15 minute interval.
OBJECT-TYPE    
  Counter64  

caclHCIntervalOutRcvCLP0Cells 1.3.6.1.4.1.9.9.133.1.2.4.1.11
The 64 bit version of the number of CLP0 cells received by the interfacefrom the switch fabric during 15 minute interval.
OBJECT-TYPE    
  Counter64  

caclHCIntervalOutRcvCLP1Cells 1.3.6.1.4.1.9.9.133.1.2.4.1.12
The 64 bit version of the number of CLP1 cells received by the interface from the switch fabric during 15 minute interval.
OBJECT-TYPE    
  Counter64  

caclMIBConformance 1.3.6.1.4.1.9.9.133.1.3
OBJECT IDENTIFIER    

caclMIBCompliances 1.3.6.1.4.1.9.9.133.1.3.1
OBJECT IDENTIFIER    

caclMIBCompliance 1.3.6.1.4.1.9.9.133.1.3.1.1
The Compliance statement for the Cisco ATM Cell layer MIB.
MODULE-COMPLIANCE    

caclMIBCompliance1 1.3.6.1.4.1.9.9.133.1.3.1.2
The Compliance statement for the Cisco ATM Cell layer MIB.
MODULE-COMPLIANCE    

caclMIBGroups 1.3.6.1.4.1.9.9.133.1.3.2
OBJECT IDENTIFIER    

caclMIBGroup 1.3.6.1.4.1.9.9.133.1.3.2.1
A collection of objects which provide ATM cell layer configuration parmeters.
OBJECT-GROUP    

caclATMSwitchStatsMIBGroup 1.3.6.1.4.1.9.9.133.1.3.2.2
A collection of objects which provide statistics for ATM switch interfaces.
OBJECT-GROUP    

caclATMEndSyatemStatsMIBGroup 1.3.6.1.4.1.9.9.133.1.3.2.3
A collection of objects which provide statistics for ATM end-system interfaces.
OBJECT-GROUP    

caclHighSpeedATMMIBGroup 1.3.6.1.4.1.9.9.133.1.3.2.4
These statistics apply to ATM interfaces with speed of OC12 or higher.
OBJECT-GROUP    

caclIntervalStatsMIBGroup 1.3.6.1.4.1.9.9.133.1.3.2.5
A collection of interval statistics.
OBJECT-GROUP    

caclATMSwitchStatsMIBGroup1 1.3.6.1.4.1.9.9.133.1.3.2.6
A collection of objects which provide statistics for ATM switch interfaces.
OBJECT-GROUP    

caclATMStatsMIBGroup 1.3.6.1.4.1.9.9.133.1.3.2.7
A collection of objects which provide statistics for ATM switch and ATM end-system interfaces.
OBJECT-GROUP    

caclHighSpeedATMMIBGroup1 1.3.6.1.4.1.9.9.133.1.3.2.8
These statistics apply to ATM interfaces with speed of OC12 or higher.
OBJECT-GROUP    

caclIntervalStatsMIBGroup1 1.3.6.1.4.1.9.9.133.1.3.2.9
A collection of interval statistics.
OBJECT-GROUP    

caclHCIntervalStatsMIBGroup 1.3.6.1.4.1.9.9.133.1.3.2.10
A collection of interval statistics.
OBJECT-GROUP    

Defined Objects

CaclConfigEntry  
SEQUENCE    
  OCTET STRING as caclNullCellHeader  
  Unsigned32 as caclNullCellPayload  
  TruthValue as caclHecCosetEnable  
  TruthValue as caclPayloadScramblingEnable  
  INTEGER as caclTimeElapsed  
  INTEGER as caclValidIntervals  
  INTEGER as caclInvalidIntervals  

CaclStatsEntry  
SEQUENCE    
  Counter32 as caclInRcvCLP0Cells  
  Counter32 as caclInRcvCLP1Cells  
  Counter32 as caclInValidOAMCells  
  Counter32 as caclInErrOAMCells  
  Counter32 as caclInGfcCells  
  Counter32 as caclInVpiVciErrCells  
  Integer32 as caclInLastUnknVpi  
  Integer32 as caclInLastUnknVci  
  Counter32 as caclInXmtCLP0Cells  
  Counter32 as caclInXmtCLP1Cells  
  Counter32 as caclInValidRMCells  
  Counter32 as caclInRcvIdleCells  
  Counter32 as caclInHecErrDiscCells  
  Counter32 as caclInHecErrCorrectedCells  
  Counter32 as caclInUpcCLP0DiscCells  
  Counter32 as caclInUpcTotalDiscCells  
  Counter32 as caclInUpcTotalNonCompCells  
  Counter32 as caclOutXmtCLP0Cells  
  Counter32 as caclOutXmtCLP1Cells  
  Counter32 as caclOutValidOAMCells  
  Counter32 as caclOutErrOAMCells  
  Counter32 as caclOutVpiVciErrCells  
  Counter32 as caclOutRcvCLP0Cells  
  Counter32 as caclOutRcvCLP1Cells  
  Counter32 as caclOutRcvValidRMCells  
  Counter32 as caclOutRcvIdleCells  
  Counter64 as caclHInRcvCLP0Cells  
  Counter64 as caclHInRcvCLP1Cells  
  Counter64 as caclHOutXmtCLP0Cells  
  Counter64 as caclHOutXmtCLP1Cells  
  Counter32 as caclHighInRcvCLP0Cells  
  Counter32 as caclHighInRcvCLP1Cells  
  Counter32 as caclHighInValidOAMCells  
  Counter32 as caclHighInVpiVciErrCells  
  Counter32 as caclHighInXmtCLP0Cells  
  Counter32 as caclHighInXmtCLP1Cells  
  Counter32 as caclHighInHecErrDiscCells  
  Counter32 as caclHighInHecErrCorrectedCells  
  Counter32 as caclHighOutXmtCLP0Cells  
  Counter32 as caclHighOutXmtCLP1Cells  
  Counter32 as caclHighOutValidOAMCells  
  Counter32 as caclHighOutRcvCLP0Cells  
  Counter32 as caclHighOutRcvCLP1Cells  

CaclIntervalStatsEntry  
SEQUENCE    
  INTEGER as caclIntervalNumber  
  Gauge32 as caclIntervalInRcvCLP0Cells  
  Gauge32 as caclIntervalInRcvCLP1Cells  
  Gauge32 as caclIntervalInValidOAMCells  
  Gauge32 as caclIntervalInErrOAMCells  
  Gauge32 as caclIntervalInGfcCells  
  Gauge32 as caclIntervalInVpiVciErrCells  
  Integer32 as caclIntervalInLastUnknVpi  
  Integer32 as caclIntervalInLastUnknVci  
  Gauge32 as caclIntervalInXmtCLP0Cells  
  Gauge32 as caclIntervalInXmtCLP1Cells  
  Gauge32 as caclIntervalInValidRMCells  
  Gauge32 as caclIntervalInRcvIdleCells  
  Gauge32 as caclIntervalInHecErrDiscCells  
  Gauge32 as caclIntervalInHecErrCorrCells  
  Gauge32 as caclIntervalInUpcCLP0DiscCells  
  Gauge32 as caclIntervalInUpcTotalDiscCells  
  Gauge32 as caclIntervalInUpcTotNonCmpCells  
  Gauge32 as caclIntervalOutXmtCLP0Cells  
  Gauge32 as caclIntervalOutXmtCLP1Cells  
  Gauge32 as caclIntervalOutValidOAMCells  
  Gauge32 as caclIntervalOutErrOAMCells  
  Gauge32 as caclIntervalOutVpiVciErrCells  
  Gauge32 as caclIntervalOutRcvCLP0Cells  
  Gauge32 as caclIntervalOutRcvCLP1Cells  
  Gauge32 as caclIntervalOutRcvValidRMCells  
  Gauge32 as caclIntervalOutRcvIdleCells  
  Gauge32 as caclHighIntervalInRcvCLP0Cells  
  Gauge32 as caclHighIntervalInRcvCLP1Cells  
  Gauge32 as caclHighIntervalInVpiVciErrCells  
  Gauge32 as caclHighIntervalInXmtCLP0Cells  
  Gauge32 as caclHighIntervalInXmtCLP1Cells  
  Gauge32 as caclHighIntervalInHecErrDiscCells  
  Gauge32 as caclHighIntervalInHecErrCorrCells  
  Gauge32 as caclHighIntervalOutXmtCLP0Cells  
  Gauge32 as caclHighIntervalOutXmtCLP1Cells  
  Gauge32 as caclHighIntervalOutVpiVciErrCells  
  Gauge32 as caclHighIntervalOutRcvCLP0Cells  
  Gauge32 as caclHighIntervalOutRcvCLP1Cells  

CaclXStatsEntry  
SEQUENCE    
  Counter64 as caclHCInValidOAMCells  
  Counter64 as caclHCInVpiVciErrCells  
  Counter64 as caclHCInXmtCLP0Cells  
  Counter64 as caclHCInXmtCLP1Cells  
  Counter64 as caclHCInHecErrDiscCells  
  Counter64 as caclHCInHecErrCorrectedCells  
  Counter64 as caclHCOutValidOAMCells  
  Counter64 as caclHCOutRcvCLP0Cells  
  Counter64 as caclHCOutRcvCLP1Cells  

CaclXIntervalStatsEntry  
SEQUENCE    
  Counter64 as caclHCIntervalInRcvCLP0Cells  
  Counter64 as caclHCIntervalInRcvCLP1Cells  
  Counter64 as caclHCIntervalInVpiVciErrCells  
  Counter64 as caclHCIntervalInXmtCLP0Cells  
  Counter64 as caclHCIntervalInXmtCLP1Cells  
  Counter64 as caclHCIntervalInHecErrDiscCells  
  Counter64 as caclHCIntervalInHecErrCorrCells  
  Counter64 as caclHCIntervalOutXmtCLP0Cells  
  Counter64 as caclHCIntervalOutXmtCLP1Cells  
  Counter64 as caclHCIntervalOutVpiVciErrCells  
  Counter64 as caclHCIntervalOutRcvCLP0Cells  
  Counter64 as caclHCIntervalOutRcvCLP1Cells