CISCO-DYNAMIC-ARP-INSPECTION-MIB

File: CISCO-DYNAMIC-ARP-INSPECTION-MIB.mib (9133 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
IF-MIB Q-BRIDGE-MIB CISCO-SMI

Imported symbols

MODULE-IDENTITY Unsigned32 OBJECT-TYPE
MODULE-COMPLIANCE OBJECT-GROUP TruthValue
ifIndex VlanIndex ciscoMgmt

Defined Objects

ciscoDynamicArpInspectionMIB 1.3.6.1.4.1.9.9.374
The MIB module is for configuration of Dynamic ARP Inspection feature. Dynamic ARP Inspection is a security mechanism which validate ARP packets seen on access ports.
MODULE-IDENTITY    

cdaiMIBNotifs 1.3.6.1.4.1.9.9.374.0
OBJECT IDENTIFIER    

cdaiMIBObjects 1.3.6.1.4.1.9.9.374.1
OBJECT IDENTIFIER    

cdaiGlobal 1.3.6.1.4.1.9.9.374.1.1
OBJECT IDENTIFIER    

cdaiLoggingEnable 1.3.6.1.4.1.9.9.374.1.1.1
This object indicates whether the Dynamic ARP Inspection logging is enabled on the device. If this object is set to 'true', Dynamic ARP Inspection logging is enabled. If this object is set to 'false', Dynamic ARP Inspection loging is disabled.
OBJECT-TYPE    
  TruthValue  

cdaiVlan 1.3.6.1.4.1.9.9.374.1.2
OBJECT IDENTIFIER    

cdaiVlanConfigTable 1.3.6.1.4.1.9.9.374.1.2.1
A table provides the mechanism to control Dynamic ARP Inspection per VLAN. When a VLAN is created in a device supporting this table, a corresponding entry of this table will be added.
OBJECT-TYPE    
  SEQUENCE OF  
    CdaiVlanConfigEntry

cdaiVlanConfigEntry 1.3.6.1.4.1.9.9.374.1.2.1.1
A row instance contains the configuration to enable or disable Dynamic ARP Inspection at each existing VLAN.
OBJECT-TYPE    
  CdaiVlanConfigEntry  

cdaiVlanIndex 1.3.6.1.4.1.9.9.374.1.2.1.1.1
This object indicates the VLAN number on which Dynamic ARP Inspection feature is configured.
OBJECT-TYPE    
  VlanIndex  

cdaiVlanDynArpInspEnable 1.3.6.1.4.1.9.9.374.1.2.1.1.2
This object indicates whether Dynamic ARP Inspection is enabled in this VLAN. If this object is set to 'true', Dynamic ARP Inspection is enabled. If this object is set to 'false', Dynamic ARP Inspection is disabled.
OBJECT-TYPE    
  TruthValue  

cdaiInterface 1.3.6.1.4.1.9.9.374.1.3
OBJECT IDENTIFIER    

cdaiIfConfigTable 1.3.6.1.4.1.9.9.374.1.3.1
A table provides the mechanism to configure the trust state for Dynamic ARP Inspection purpose at each physical interface capable of this feature. Some of the interfaces (but not limited to) for which this feature might be applicable are: ifType = ethernetCsmacd(6).
OBJECT-TYPE    
  SEQUENCE OF  
    CdaiIfConfigEntry

cdaiIfConfigEntry 1.3.6.1.4.1.9.9.374.1.3.1.1
A row instance contains the configuration to enable or disable trust state for Dynamic ARP Inspection at each physical interface capable of this feature.
OBJECT-TYPE    
  CdaiIfConfigEntry  

cdaiIfTrustEnable 1.3.6.1.4.1.9.9.374.1.3.1.1.1
This object indicates whether the interface is trusted for Dynamic ARP Inspection purpose. If this object is set to 'true', the interface is trusted. ARP packets coming to this interface will be forwarded without checking. If this object is set to 'false', the interface is not trusted. ARP packets coming to this interface will be subjected to ARP inspection.
OBJECT-TYPE    
  TruthValue  

cdaiIfRateLimitTable 1.3.6.1.4.1.9.9.374.1.3.2
A table provides the mechanism to configure the rate limit for Dynamic ARP Inspection purpose at each physical interface capable of this feature.
OBJECT-TYPE    
  SEQUENCE OF  
    CdaiIfRateLimitEntry

cdaiIfRateLimitEntry 1.3.6.1.4.1.9.9.374.1.3.2.1
A row instance contains the configuration of rate limit Dynamic ARP Inspection at each physical interface capable of this feature.
OBJECT-TYPE    
  CdaiIfRateLimitEntry  

cdaiIfRateLimit 1.3.6.1.4.1.9.9.374.1.3.2.1.1
This object indicates rate limit value for Dynamic ARP Inspection purpose. If the incoming rate of ARP packets exceeds the value of this object, ARP packets will be dropped.
OBJECT-TYPE    
  Unsigned32  

cdaiMIBConformance 1.3.6.1.4.1.9.9.374.2
OBJECT IDENTIFIER    

cdaiMIBCompliances 1.3.6.1.4.1.9.9.374.2.1
OBJECT IDENTIFIER    

cdaiMIBCompliance 1.3.6.1.4.1.9.9.374.2.1.1
The compliance statement for CISCO-DYNAMIC-ARP-INSPECTION-MIB
MODULE-COMPLIANCE    

cdaiMIBGroups 1.3.6.1.4.1.9.9.374.2.2
OBJECT IDENTIFIER    

cdaiGlobalLoggingGroup 1.3.6.1.4.1.9.9.374.2.2.1
A collection of object which is used to configure Dynamic ARP Inspection logging.
OBJECT-GROUP    

cdaiVlanConfigGroup 1.3.6.1.4.1.9.9.374.2.2.2
A collection of object which are used to configure as well as show information regarding the Dynamic ARP Inspection feature per VLAN.
OBJECT-GROUP    

cdaiIfConfigGroup 1.3.6.1.4.1.9.9.374.2.2.3
A collection of object which are used to configure as well as show information regarding the interface trust state for Dynamic ARP Inspection purpose.
OBJECT-GROUP    

cdaiIfRateLimitGroup 1.3.6.1.4.1.9.9.374.2.2.4
A collection of object which are used to configure as well as show information regarding the rate limit per interface for Dynamic ARP Inspection purpose.
OBJECT-GROUP    

Defined Objects

CdaiVlanConfigEntry  
SEQUENCE    
  VlanIndex as cdaiVlanIndex  
  TruthValue as cdaiVlanDynArpInspEnable  

CdaiIfConfigEntry  
SEQUENCE    
  TruthValue as cdaiIfTrustEnable  

CdaiIfRateLimitEntry  
SEQUENCE    
  Unsigned32 as cdaiIfRateLimit