CISCO-IPSEC-FLOW-MONITOR-MIB

File: CISCO-IPSEC-FLOW-MONITOR-MIB.mib (204295 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
CISCO-MEDIA-GATEWAY-MIB CISCO-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Counter32 Counter64 Gauge32
Integer32 Unsigned32 MODULE-COMPLIANCE
OBJECT-GROUP NOTIFICATION-GROUP TEXTUAL-CONVENTION
DisplayString TimeStamp TimeInterval
TruthValue cmgwIndex ciscoMgmt

Defined Objects

ciscoIpSecFlowMonitorMIB 1.3.6.1.4.1.9.9.171
This is a MIB Module for monitoring the structures in IPSec-based Virtual Private Networks. The MIB has been designed to be adopted as an IETF standard. Hence Cisco-specific features of IPSec protocol are excluded from this MIB. Acronyms The following acronyms are used in this document: IPSec: Secure IP Protocol VPN: Virtual Private Network ISAKMP: Internet Security Association and Key Exchange Protocol IKE: Internet Key Exchange Protocol SA: Security Association MM: Main Mode - the process of setting up a Phase 1 SA to secure the exchanges required to setup Phase 2 SAs QM: Quick Mode - the process of setting up Phase 2 Security Associations using a Phase 1 SA. Overview of IPsec MIB The MIB contains six major groups of objects which are used to manage the IPSec Protocol. These groups include a Levels Group, a Phase-1 Group, a Phase-2 Group, a History Group, a Failure Group and a TRAP Control Group. The following table illustrates the structure of the IPSec MIB. The Phase 1 group models objects pertaining to IKE negotiations and tunnels. The Phase 2 group models objects pertaining to IPSec data tunnels. The History group is to aid applications that do trending analysis. The Failure group is to enable an operator to do troubleshooting and debugging of the VPN Router. Further, counters are supported to aid Intrusion Detection. In addition to the five major MIB Groups, there are a number of Notifications. The following table illustrates the name and description of the IPSec TRAPs. For a detailed discussion, please refer to the IETF draft draft-ietf-ipsec-flow-monitoring-mib-00.txt.
MODULE-IDENTITY    

cipSecMIBObjects 1.3.6.1.4.1.9.9.171.1
OBJECT IDENTIFIER    

cipSecLevels 1.3.6.1.4.1.9.9.171.1.1
OBJECT IDENTIFIER    

cipSecMibLevel 1.3.6.1.4.1.9.9.171.1.1.1
The level of the IPsec MIB.
OBJECT-TYPE    
  Integer32 1..4096  

cipSecPhaseOne 1.3.6.1.4.1.9.9.171.1.2
OBJECT IDENTIFIER    

cikeGlobalStats 1.3.6.1.4.1.9.9.171.1.2.1
OBJECT IDENTIFIER    

cikeGlobalActiveTunnels 1.3.6.1.4.1.9.9.171.1.2.1.1
The number of currently active IPsec Phase-1 IKE Tunnels.
OBJECT-TYPE    
  Gauge32  

cikeGlobalPreviousTunnels 1.3.6.1.4.1.9.9.171.1.2.1.2
The total number of previously active IPsec Phase-1 IKE Tunnels.
OBJECT-TYPE    
  Counter32  

cikeGlobalInOctets 1.3.6.1.4.1.9.9.171.1.2.1.3
The total number of octets received by all currently and previously active IPsec Phase-1 IKE Tunnels.
OBJECT-TYPE    
  Counter32  

cikeGlobalInPkts 1.3.6.1.4.1.9.9.171.1.2.1.4
The total number of packets received by all currently and previously active IPsec Phase-1 IKE Tunnels.
OBJECT-TYPE    
  Counter32  

cikeGlobalInDropPkts 1.3.6.1.4.1.9.9.171.1.2.1.5
The total number of packets which were dropped during receive processing by all currently and previously active IPsec Phase-1 IKE Tunnels.
OBJECT-TYPE    
  Counter32  

cikeGlobalInNotifys 1.3.6.1.4.1.9.9.171.1.2.1.6
The total number of notifys received by all currently and previously active IPsec Phase-1 IKE Tunnels.
OBJECT-TYPE    
  Counter32  

cikeGlobalInP2Exchgs 1.3.6.1.4.1.9.9.171.1.2.1.7
The total number of IPsec Phase-2 exchanges received by all currently and previously active IPsec Phase-1 IKE Tunnels.
OBJECT-TYPE    
  Counter32  

cikeGlobalInP2ExchgInvalids 1.3.6.1.4.1.9.9.171.1.2.1.8
The total number of IPsec Phase-2 exchanges which were received and found to be invalid by all currently and previously active IPsec Phase-1 IKE Tunnels.
OBJECT-TYPE    
  Counter32  

cikeGlobalInP2ExchgRejects 1.3.6.1.4.1.9.9.171.1.2.1.9
The total number of IPsec Phase-2 exchanges which were received and rejected by all currently and previously active IPsec Phase-1 IKE Tunnels.
OBJECT-TYPE    
  Counter32  

cikeGlobalInP2SaDelRequests 1.3.6.1.4.1.9.9.171.1.2.1.10
The total number of IPsec Phase-2 security association delete requests received by all currently and previously active and IPsec Phase-1 IKE Tunnels.
OBJECT-TYPE    
  Counter32  

cikeGlobalOutOctets 1.3.6.1.4.1.9.9.171.1.2.1.11
The total number of octets sent by all currently and previously active and IPsec Phase-1 IKE Tunnels.
OBJECT-TYPE    
  Counter32  

cikeGlobalOutPkts 1.3.6.1.4.1.9.9.171.1.2.1.12
The total number of packets sent by all currently and previously active and IPsec Phase-1 Tunnels.
OBJECT-TYPE    
  Counter32  

cikeGlobalOutDropPkts 1.3.6.1.4.1.9.9.171.1.2.1.13
The total number of packets which were dropped during send processing by all currently and previously active IPsec Phase-1 IKE Tunnels.
OBJECT-TYPE    
  Counter32  

cikeGlobalOutNotifys 1.3.6.1.4.1.9.9.171.1.2.1.14
The total number of notifys sent by all currently and previously active IPsec Phase-1 IKE Tunnels.
OBJECT-TYPE    
  Counter32  

cikeGlobalOutP2Exchgs 1.3.6.1.4.1.9.9.171.1.2.1.15
The total number of IPsec Phase-2 exchanges which were sent by all currently and previously active IPsec Phase-1 IKE Tunnels.
OBJECT-TYPE    
  Counter32  

cikeGlobalOutP2ExchgInvalids 1.3.6.1.4.1.9.9.171.1.2.1.16
The total number of IPsec Phase-2 exchanges which were sent and found to be invalid by all currently and previously active IPsec Phase-1 Tunnels.
OBJECT-TYPE    
  Counter32  

cikeGlobalOutP2ExchgRejects 1.3.6.1.4.1.9.9.171.1.2.1.17
The total number of IPsec Phase-2 exchanges which were sent and rejected by all currently and previously active IPsec Phase-1 IKE Tunnels.
OBJECT-TYPE    
  Counter32  

cikeGlobalOutP2SaDelRequests 1.3.6.1.4.1.9.9.171.1.2.1.18
The total number of IPsec Phase-2 SA delete requests sent by all currently and previously active IPsec Phase-1 IKE Tunnels.
OBJECT-TYPE    
  Counter32  

cikeGlobalInitTunnels 1.3.6.1.4.1.9.9.171.1.2.1.19
The total number of IPsec Phase-1 IKE Tunnels which were locally initiated.
OBJECT-TYPE    
  Counter32  

cikeGlobalInitTunnelFails 1.3.6.1.4.1.9.9.171.1.2.1.20
The total number of IPsec Phase-1 IKE Tunnels which were locally initiated and failed to activate.
OBJECT-TYPE    
  Counter32  

cikeGlobalRespTunnelFails 1.3.6.1.4.1.9.9.171.1.2.1.21
The total number of IPsec Phase-1 IKE Tunnels which were remotely initiated and failed to activate.
OBJECT-TYPE    
  Counter32  

cikeGlobalSysCapFails 1.3.6.1.4.1.9.9.171.1.2.1.22
The total number of system capacity failures which occurred during processing of all current and previously active IPsec Phase-1 IKE Tunnels.
OBJECT-TYPE    
  Counter32  

cikeGlobalAuthFails 1.3.6.1.4.1.9.9.171.1.2.1.23
The total number of authentications which ended in failure by all current and previous IPsec Phase-1 IKE Tunnels.
OBJECT-TYPE    
  Counter32  

cikeGlobalDecryptFails 1.3.6.1.4.1.9.9.171.1.2.1.24
The total number of decryptions which ended in failure by all current and previous IPsec Phase-1 IKE Tunnels.
OBJECT-TYPE    
  Counter32  

cikeGlobalHashValidFails 1.3.6.1.4.1.9.9.171.1.2.1.25
The total number of hash validations which ended in failure by all current and previous IPsec Phase-1 IKE Tunnels.
OBJECT-TYPE    
  Counter32  

cikeGlobalNoSaFails 1.3.6.1.4.1.9.9.171.1.2.1.26
The total number of non-existent Security Association in failures which occurred during processing of all current and previous IPsec Phase-1 IKE Tunnels.
OBJECT-TYPE    
  Counter32  

cikePeerTable 1.3.6.1.4.1.9.9.171.1.2.2
The IPsec Phase-1 Internet Key Exchange Peer Table. There is one entry in this table for each IPsec Phase-1 IKE peer association which is currently associated with an active IPsec Phase-1 Tunnel. The IPsec Phase-1 IKE Tunnel associated with this IPsec Phase-1 IKE peer association may or may not be currently active.
OBJECT-TYPE    
  SEQUENCE OF  
    CikePeerEntry

cikePeerEntry 1.3.6.1.4.1.9.9.171.1.2.2.1
Each entry contains the attributes associated with an IPsec Phase-1 IKE peer association.
OBJECT-TYPE    
  CikePeerEntry  

cikePeerLocalType 1.3.6.1.4.1.9.9.171.1.2.2.1.1
The type of local peer identity. The local peer may be identified by: 1. an IP address, or 2. a host name.
OBJECT-TYPE    
  IkePeerType  

cikePeerLocalValue 1.3.6.1.4.1.9.9.171.1.2.2.1.2
The value of the local peer identity. If the local peer type is an IP Address, then this is the IP Address used to identify the local peer. If the local peer type is a host name, then this is the host name used to identify the local peer.
OBJECT-TYPE    
  DisplayString  

cikePeerRemoteType 1.3.6.1.4.1.9.9.171.1.2.2.1.3
The type of remote peer identity. The remote peer may be identified by: 1. an IP address, or 2. a host name.
OBJECT-TYPE    
  IkePeerType  

cikePeerRemoteValue 1.3.6.1.4.1.9.9.171.1.2.2.1.4
The value of the remote peer identity. If the remote peer type is an IP Address, then this is the IP Address used to identify the remote peer. If the remote peer type is a host name, then this is the host name used to identify the remote peer.
OBJECT-TYPE    
  DisplayString  

cikePeerIntIndex 1.3.6.1.4.1.9.9.171.1.2.2.1.5
The internal index of the local-remote peer association. This internal index is used to uniquely identify multiple associations between the local and remote peer.
OBJECT-TYPE    
  Integer32 1..2147483647  

cikePeerLocalAddr 1.3.6.1.4.1.9.9.171.1.2.2.1.6
The IP address of the local peer.
OBJECT-TYPE    
  IPSIpAddress  

cikePeerRemoteAddr 1.3.6.1.4.1.9.9.171.1.2.2.1.7
The IP address of the remote peer.
OBJECT-TYPE    
  IPSIpAddress  

cikePeerActiveTime 1.3.6.1.4.1.9.9.171.1.2.2.1.8
The length of time that the peer association has existed in hundredths of a second.
OBJECT-TYPE    
  TimeInterval  

cikePeerActiveTunnelIndex 1.3.6.1.4.1.9.9.171.1.2.2.1.9
The index of the active IPsec Phase-1 IKE Tunnel (cikeTunIndex in the cikeTunnelTable) for this peer association. If an IPsec Phase-1 IKE Tunnel is not currently active, then the value of this object will be zero.
OBJECT-TYPE    
  Integer32 1..2147483647  

cikeTunnelTable 1.3.6.1.4.1.9.9.171.1.2.3
The IPsec Phase-1 Internet Key Exchange Tunnel Table. There is one entry in this table for each active IPsec Phase-1 IKE Tunnel.
OBJECT-TYPE    
  SEQUENCE OF  
    CikeTunnelEntry

cikeTunnelEntry 1.3.6.1.4.1.9.9.171.1.2.3.1
Each entry contains the attributes associated with an active IPsec Phase-1 IKE Tunnel.
OBJECT-TYPE    
  CikeTunnelEntry  

cikeTunIndex 1.3.6.1.4.1.9.9.171.1.2.3.1.1
The index of the IPsec Phase-1 IKE Tunnel Table. The value of the index is a number which begins at one and is incremented with each tunnel that is created. The value of this object will wrap at 2,147,483,647.
OBJECT-TYPE    
  Integer32 1..2147483647  

cikeTunLocalType 1.3.6.1.4.1.9.9.171.1.2.3.1.2
The type of local peer identity. The local peer may be identified by: 1. an IP address, or 2. a host name.
OBJECT-TYPE    
  IkePeerType  

cikeTunLocalValue 1.3.6.1.4.1.9.9.171.1.2.3.1.3
The value of the local peer identity. If the local peer type is an IP Address, then this is the IP Address used to identify the local peer. If the local peer type is a host name, then this is the host name used to identify the local peer.
OBJECT-TYPE    
  DisplayString  

cikeTunLocalAddr 1.3.6.1.4.1.9.9.171.1.2.3.1.4
The IP address of the local endpoint for the IPsec Phase-1 IKE Tunnel.
OBJECT-TYPE    
  IPSIpAddress  

cikeTunLocalName 1.3.6.1.4.1.9.9.171.1.2.3.1.5
The DNS name of the local IP address for the IPsec Phase-1 IKE Tunnel. If the DNS name associated with the local tunnel endpoint is not known, then the value of this object will be a NULL string.
OBJECT-TYPE    
  DisplayString  

cikeTunRemoteType 1.3.6.1.4.1.9.9.171.1.2.3.1.6
The type of remote peer identity. The remote peer may be identified by: 1. an IP address, or 2. a host name.
OBJECT-TYPE    
  IkePeerType  

cikeTunRemoteValue 1.3.6.1.4.1.9.9.171.1.2.3.1.7
The value of the remote peer identity. If the remote peer type is an IP Address, then this is the IP Address used to identify the remote peer. If the remote peer type is a host name, then this is the host name used to identify the remote peer.
OBJECT-TYPE    
  DisplayString  

cikeTunRemoteAddr 1.3.6.1.4.1.9.9.171.1.2.3.1.8
The IP address of the remote endpoint for the IPsec Phase-1 IKE Tunnel.
OBJECT-TYPE    
  IPSIpAddress  

cikeTunRemoteName 1.3.6.1.4.1.9.9.171.1.2.3.1.9
The DNS name of the remote IP address of IPsec Phase-1 IKE Tunnel. If the DNS name associated with the remote tunnel endpoint is not known, then the value of this object will be a NULL string.
OBJECT-TYPE    
  DisplayString  

cikeTunNegoMode 1.3.6.1.4.1.9.9.171.1.2.3.1.10
The negotiation mode of the IPsec Phase-1 IKE Tunnel.
OBJECT-TYPE    
  IkeNegoMode  

cikeTunDiffHellmanGrp 1.3.6.1.4.1.9.9.171.1.2.3.1.11
The Diffie Hellman Group used in IPsec Phase-1 IKE negotiations.
OBJECT-TYPE    
  DiffHellmanGrp  

cikeTunEncryptAlgo 1.3.6.1.4.1.9.9.171.1.2.3.1.12
The encryption algorithm used in IPsec Phase-1 IKE negotiations.
OBJECT-TYPE    
  EncryptAlgo  

cikeTunHashAlgo 1.3.6.1.4.1.9.9.171.1.2.3.1.13
The hash algorithm used in IPsec Phase-1 IKE negotiations.
OBJECT-TYPE    
  IkeHashAlgo  

cikeTunAuthMethod 1.3.6.1.4.1.9.9.171.1.2.3.1.14
The authentication method used in IPsec Phase-1 IKE negotiations.
OBJECT-TYPE    
  IkeAuthMethod  

cikeTunLifeTime 1.3.6.1.4.1.9.9.171.1.2.3.1.15
The negotiated LifeTime of the IPsec Phase-1 IKE Tunnel in seconds.
OBJECT-TYPE    
  Integer32 1..2147483647  

cikeTunActiveTime 1.3.6.1.4.1.9.9.171.1.2.3.1.16
The length of time the IPsec Phase-1 IKE tunnel has been active in hundredths of seconds.
OBJECT-TYPE    
  TimeInterval  

cikeTunSaRefreshThreshold 1.3.6.1.4.1.9.9.171.1.2.3.1.17
The security association refresh threshold in seconds.
OBJECT-TYPE    
  Integer32 1..2147483647  

cikeTunTotalRefreshes 1.3.6.1.4.1.9.9.171.1.2.3.1.18
The total number of security associations refreshes performed.
OBJECT-TYPE    
  Counter32  

cikeTunInOctets 1.3.6.1.4.1.9.9.171.1.2.3.1.19
The total number of octets received by this IPsec Phase-1 IKE Tunnel.
OBJECT-TYPE    
  Counter32  

cikeTunInPkts 1.3.6.1.4.1.9.9.171.1.2.3.1.20
The total number of packets received by this IPsec Phase-1 IKE Tunnel.
OBJECT-TYPE    
  Counter32  

cikeTunInDropPkts 1.3.6.1.4.1.9.9.171.1.2.3.1.21
The total number of packets dropped by this IPsec Phase-1 IKE Tunnel during receive processing.
OBJECT-TYPE    
  Counter32  

cikeTunInNotifys 1.3.6.1.4.1.9.9.171.1.2.3.1.22
The total number of notifys received by this IPsec Phase-1 IKE Tunnel.
OBJECT-TYPE    
  Counter32  

cikeTunInP2Exchgs 1.3.6.1.4.1.9.9.171.1.2.3.1.23
The total number of IPsec Phase-2 exchanges received by this IPsec Phase-1 IKE Tunnel.
OBJECT-TYPE    
  Counter32  

cikeTunInP2ExchgInvalids 1.3.6.1.4.1.9.9.171.1.2.3.1.24
The total number of IPsec Phase-2 exchanges received and found to be invalid by this IPsec Phase-1 IKE Tunnel.
OBJECT-TYPE    
  Counter32  

cikeTunInP2ExchgRejects 1.3.6.1.4.1.9.9.171.1.2.3.1.25
The total number of IPsec Phase-2 exchanges received and rejected by this IPsec Phase-1 Tunnel.
OBJECT-TYPE    
  Counter32  

cikeTunInP2SaDelRequests 1.3.6.1.4.1.9.9.171.1.2.3.1.26
The total number of IPsec Phase-2 security association delete requests received by this IPsec Phase-1 IKE Tunnel.
OBJECT-TYPE    
  Counter32  

cikeTunOutOctets 1.3.6.1.4.1.9.9.171.1.2.3.1.27
The total number of octets sent by this IPsec Phase-1 IKE Tunnel.
OBJECT-TYPE    
  Counter32  

cikeTunOutPkts 1.3.6.1.4.1.9.9.171.1.2.3.1.28
The total number of packets sent by this IPsec Phase-1 IKE Tunnel.
OBJECT-TYPE    
  Counter32  

cikeTunOutDropPkts 1.3.6.1.4.1.9.9.171.1.2.3.1.29
The total number of packets dropped by this IPsec Phase-1 IKE Tunnel during send processing.
OBJECT-TYPE    
  Counter32  

cikeTunOutNotifys 1.3.6.1.4.1.9.9.171.1.2.3.1.30
The total number of notifys sent by this IPsec Phase-1 Tunnel.
OBJECT-TYPE    
  Counter32  

cikeTunOutP2Exchgs 1.3.6.1.4.1.9.9.171.1.2.3.1.31
The total number of IPsec Phase-2 exchanges sent by this IPsec Phase-1 IKE Tunnel.
OBJECT-TYPE    
  Counter32  

cikeTunOutP2ExchgInvalids 1.3.6.1.4.1.9.9.171.1.2.3.1.32
The total number of IPsec Phase-2 exchanges sent and found to be invalid by this IPsec Phase-1 IKE Tunnel.
OBJECT-TYPE    
  Counter32  

cikeTunOutP2ExchgRejects 1.3.6.1.4.1.9.9.171.1.2.3.1.33
The total number of IPsec Phase-2 exchanges sent and rejected by this IPsec Phase-1 IKE Tunnel.
OBJECT-TYPE    
  Counter32  

cikeTunOutP2SaDelRequests 1.3.6.1.4.1.9.9.171.1.2.3.1.34
The total number of IPsec Phase-2 security association delete requests sent by this IPsec Phase-1 IKE Tunnel.
OBJECT-TYPE    
  Counter32  

cikeTunStatus 1.3.6.1.4.1.9.9.171.1.2.3.1.35
The status of the MIB table row. This object can be used to bring the tunnel down by setting value of this object to destroy(2). This object cannot be used to create a MIB table row.
OBJECT-TYPE    
  TunnelStatus  

cikePeerCorrTable 1.3.6.1.4.1.9.9.171.1.2.4
The IPsec Phase-1 Internet Key Exchange Peer Association to IPsec Phase-2 Tunnel Correlation Table. There is one entry in this table for each active IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  SEQUENCE OF  
    CikePeerCorrEntry

cikePeerCorrEntry 1.3.6.1.4.1.9.9.171.1.2.4.1
Each entry contains the attributes of an IPsec Phase-1 IKE Peer Association to IPsec Phase-2 Tunnel Correlation.
OBJECT-TYPE    
  CikePeerCorrEntry  

cikePeerCorrLocalType 1.3.6.1.4.1.9.9.171.1.2.4.1.1
The type of local peer identity. The local peer may be identified by: 1. an IP address, or 2. a host name.
OBJECT-TYPE    
  IkePeerType  

cikePeerCorrLocalValue 1.3.6.1.4.1.9.9.171.1.2.4.1.2
The value of the local peer identity. If the local peer type is an IP Address, then this is the IP Address used to identify the local peer. If the local peer type is a host name, then this is the host name used to identify the local peer.
OBJECT-TYPE    
  DisplayString  

cikePeerCorrRemoteType 1.3.6.1.4.1.9.9.171.1.2.4.1.3
The type of remote peer identity. The remote peer may be identified by: 1. an IP address, or 2. a host name.
OBJECT-TYPE    
  IkePeerType  

cikePeerCorrRemoteValue 1.3.6.1.4.1.9.9.171.1.2.4.1.4
The value of the remote peer identity. If the remote peer type is an IP Address, then this is the IP Address used to identify the remote peer. If the remote peer type is a host name, then this is the host name used to identify the remote peer.
OBJECT-TYPE    
  DisplayString  

cikePeerCorrIntIndex 1.3.6.1.4.1.9.9.171.1.2.4.1.5
The internal index of the local-remote peer association. This internal index is used to uniquely identify multiple associations between the local and remote peer.
OBJECT-TYPE    
  Integer32 1..2147483647  

cikePeerCorrSeqNum 1.3.6.1.4.1.9.9.171.1.2.4.1.6
The sequence number of the local-remote peer association. This sequence number is used to uniquely identify multiple instances of an unique association between the local and remote peer.
OBJECT-TYPE    
  Integer32 1..2147483647  

cikePeerCorrIpSecTunIndex 1.3.6.1.4.1.9.9.171.1.2.4.1.7
The index of the active IPsec Phase-2 Tunnel (cipSecTunIndex in the cipSecTunnelTable) for this IPsec Phase-1 IKE Peer Association.
OBJECT-TYPE    
  Integer32 1..2147483647  

cikePhase1GWStatsTable 1.3.6.1.4.1.9.9.171.1.2.5
Phase-1 IKE stats information is included in this table. Each entry is related to a specific gateway which is identified by 'cmgwIndex'.
OBJECT-TYPE    
  SEQUENCE OF  
    CikePhase1GWStatsEntry

cikePhase1GWStatsEntry 1.3.6.1.4.1.9.9.171.1.2.5.1
Each entry contains the attributes of an Phase-1 IKE stats information for the related gateway. There is only one entry for each gateway. The entry is created when a gateway up and cannot be deleted.
OBJECT-TYPE    
  CikePhase1GWStatsEntry  

cikePhase1GWActiveTunnels 1.3.6.1.4.1.9.9.171.1.2.5.1.1
The number of currently active IPsec Phase-1 IKE Tunnels.
OBJECT-TYPE    
  Gauge32  

cikePhase1GWPreviousTunnels 1.3.6.1.4.1.9.9.171.1.2.5.1.2
The total number of previously active IPsec Phase-1 IKE Tunnels.
OBJECT-TYPE    
  Counter32  

cikePhase1GWInOctets 1.3.6.1.4.1.9.9.171.1.2.5.1.3
The total number of octets received by all currently and previously active IPsec Phase-1 IKE Tunnels.
OBJECT-TYPE    
  Counter32  

cikePhase1GWInPkts 1.3.6.1.4.1.9.9.171.1.2.5.1.4
The total number of packets received by all currently and previously active IPsec Phase-1 IKE Tunnels.
OBJECT-TYPE    
  Counter32  

cikePhase1GWInDropPkts 1.3.6.1.4.1.9.9.171.1.2.5.1.5
The total number of packets which were dropped during receive processing by all currently and previously active IPsec Phase-1 IKE Tunnels.
OBJECT-TYPE    
  Counter32  

cikePhase1GWInNotifys 1.3.6.1.4.1.9.9.171.1.2.5.1.6
The total number of notifys received by all currently and previously active IPsec Phase-1 IKE Tunnels.
OBJECT-TYPE    
  Counter32  

cikePhase1GWInP2Exchgs 1.3.6.1.4.1.9.9.171.1.2.5.1.7
The total number of IPsec Phase-2 exchanges received by all currently and previously active IPsec Phase-1 IKE Tunnels.
OBJECT-TYPE    
  Counter32  

cikePhase1GWInP2ExchgInvalids 1.3.6.1.4.1.9.9.171.1.2.5.1.8
The total number of IPsec Phase-2 exchanges which were received and found to be invalid by all currently and previously active IPsec Phase-1 IKE Tunnels.
OBJECT-TYPE    
  Counter32  

cikePhase1GWInP2ExchgRejects 1.3.6.1.4.1.9.9.171.1.2.5.1.9
The total number of IPsec Phase-2 exchanges which were received and rejected by all currently and previously active IPsec Phase-1 IKE Tunnels.
OBJECT-TYPE    
  Counter32  

cikePhase1GWInP2SaDelRequests 1.3.6.1.4.1.9.9.171.1.2.5.1.10
The total number of IPsec Phase-2 'Security Association' delete requests received by all currently and previously active and IPsec Phase-1 IKE Tunnels.
OBJECT-TYPE    
  Counter32  

cikePhase1GWOutOctets 1.3.6.1.4.1.9.9.171.1.2.5.1.11
The total number of octets sent by all currently and previously active and IPsec Phase-1 IKE Tunnels.
OBJECT-TYPE    
  Counter32  

cikePhase1GWOutPkts 1.3.6.1.4.1.9.9.171.1.2.5.1.12
The total number of packets sent by all currently and previously active and IPsec Phase-1 Tunnels.
OBJECT-TYPE    
  Counter32  

cikePhase1GWOutDropPkts 1.3.6.1.4.1.9.9.171.1.2.5.1.13
The total number of packets which were dropped during send processing by all currently and previously active IPsec Phase-1 IKE Tunnels.
OBJECT-TYPE    
  Counter32  

cikePhase1GWOutNotifys 1.3.6.1.4.1.9.9.171.1.2.5.1.14
The total number of notifys sent by all currently and previously active IPsec Phase-1 IKE Tunnels.
OBJECT-TYPE    
  Counter32  

cikePhase1GWOutP2Exchgs 1.3.6.1.4.1.9.9.171.1.2.5.1.15
The total number of IPsec Phase-2 exchanges which were sent by all currently and previously active IPsec Phase-1 IKE Tunnels.
OBJECT-TYPE    
  Counter32  

cikePhase1GWOutP2ExchgInvalids 1.3.6.1.4.1.9.9.171.1.2.5.1.16
The total number of IPsec Phase-2 exchanges which were sent and found to be invalid by all currently and previously active IPsec Phase-1 Tunnels.
OBJECT-TYPE    
  Counter32  

cikePhase1GWOutP2ExchgRejects 1.3.6.1.4.1.9.9.171.1.2.5.1.17
The total number of IPsec Phase-2 exchanges which were sent and rejected by all currently and previously active IPsec Phase-1 IKE Tunnels.
OBJECT-TYPE    
  Counter32  

cikePhase1GWOutP2SaDelRequests 1.3.6.1.4.1.9.9.171.1.2.5.1.18
The total number of IPsec Phase-2 SA delete requests sent by all currently and previously active IPsec Phase-1 IKE Tunnels.
OBJECT-TYPE    
  Counter32  

cikePhase1GWInitTunnels 1.3.6.1.4.1.9.9.171.1.2.5.1.19
The total number of IPsec Phase-1 IKE Tunnels which were locally initiated.
OBJECT-TYPE    
  Counter32  

cikePhase1GWInitTunnelFails 1.3.6.1.4.1.9.9.171.1.2.5.1.20
The total number of IPsec Phase-1 IKE Tunnels which were locally initiated and failed to activate.
OBJECT-TYPE    
  Counter32  

cikePhase1GWRespTunnelFails 1.3.6.1.4.1.9.9.171.1.2.5.1.21
The total number of IPsec Phase-1 IKE Tunnels which were remotely initiated and failed to activate.
OBJECT-TYPE    
  Counter32  

cikePhase1GWSysCapFails 1.3.6.1.4.1.9.9.171.1.2.5.1.22
The total number of system capacity failures which occurred during processing of all current and previously active IPsec Phase-1 IKE Tunnels.
OBJECT-TYPE    
  Counter32  

cikePhase1GWAuthFails 1.3.6.1.4.1.9.9.171.1.2.5.1.23
The total number of authentications which ended in failure by all current and previous IPsec Phase-1 IKE Tunnels.
OBJECT-TYPE    
  Counter32  

cikePhase1GWDecryptFails 1.3.6.1.4.1.9.9.171.1.2.5.1.24
The total number of decryptions which ended in failure by all current and previous IPsec Phase-1 IKE Tunnels.
OBJECT-TYPE    
  Counter32  

cikePhase1GWHashValidFails 1.3.6.1.4.1.9.9.171.1.2.5.1.25
The total number of hash validations which ended in failure by all current and previous IPsec Phase-1 IKE Tunnels.
OBJECT-TYPE    
  Counter32  

cikePhase1GWNoSaFails 1.3.6.1.4.1.9.9.171.1.2.5.1.26
The total number of non-existent 'Security Association' failures occurred during processing of current and previous IPsec Phase-1 IKE Tunnels.
OBJECT-TYPE    
  Counter32  

cipSecPhaseTwo 1.3.6.1.4.1.9.9.171.1.3
OBJECT IDENTIFIER    

cipSecGlobalStats 1.3.6.1.4.1.9.9.171.1.3.1
OBJECT IDENTIFIER    

cipSecGlobalActiveTunnels 1.3.6.1.4.1.9.9.171.1.3.1.1
The total number of currently active IPsec Phase-2 Tunnels.
OBJECT-TYPE    
  Gauge32  

cipSecGlobalPreviousTunnels 1.3.6.1.4.1.9.9.171.1.3.1.2
The total number of previously active IPsec Phase-2 Tunnels.
OBJECT-TYPE    
  Counter32  

cipSecGlobalInOctets 1.3.6.1.4.1.9.9.171.1.3.1.3
The total number of octets received by all current and previous IPsec Phase-2 Tunnels. This value is accumulated BEFORE determining whether or not the packet should be decompressed. See also cipSecGlobalInOctWraps for the number of times this counter has wrapped.
OBJECT-TYPE    
  Counter32  

cipSecGlobalHcInOctets 1.3.6.1.4.1.9.9.171.1.3.1.4
A high capacity count of the total number of octets received by all current and previous IPsec Phase-2 Tunnels. This value is accumulated BEFORE determining whether or not the packet should be decompressed.
OBJECT-TYPE    
  Counter64  

cipSecGlobalInOctWraps 1.3.6.1.4.1.9.9.171.1.3.1.5
The number of times the global octets received counter (cipSecGlobalInOctets) has wrapped.
OBJECT-TYPE    
  Counter32  

cipSecGlobalInDecompOctets 1.3.6.1.4.1.9.9.171.1.3.1.6
The total number of decompressed octets received by all current and previous IPsec Phase-2 Tunnels. This value is accumulated AFTER the packet is decompressed. If compression is not being used, this value will match the value of cipSecGlobalInOctets. See also cipSecGlobalInDecompOctWraps for the number of times this counter has wrapped.
OBJECT-TYPE    
  Counter32  

cipSecGlobalHcInDecompOctets 1.3.6.1.4.1.9.9.171.1.3.1.7
A high capacity count of the total number of decompressed octets received by all current and previous IPsec Phase-2 Tunnels. This value is accumulated AFTER the packet is decompressed. If compression is not being used, this value will match the value of cipSecGlobalHcInOctets.
OBJECT-TYPE    
  Counter64  

cipSecGlobalInDecompOctWraps 1.3.6.1.4.1.9.9.171.1.3.1.8
The number of times the global decompressed octets received counter (cipSecGlobalInDecompOctets) has wrapped.
OBJECT-TYPE    
  Counter32  

cipSecGlobalInPkts 1.3.6.1.4.1.9.9.171.1.3.1.9
The total number of packets received by all current and previous IPsec Phase-2 Tunnels.
OBJECT-TYPE    
  Counter32  

cipSecGlobalInDrops 1.3.6.1.4.1.9.9.171.1.3.1.10
The total number of packets dropped during receive processing by all current and previous IPsec Phase-2 Tunnels. This count does NOT include packets dropped due to Anti-Replay processing.
OBJECT-TYPE    
  Counter32  

cipSecGlobalInReplayDrops 1.3.6.1.4.1.9.9.171.1.3.1.11
The total number of packets dropped during receive processing due to Anti-Replay processing by all current and previous IPsec Phase-2 Tunnels.
OBJECT-TYPE    
  Counter32  

cipSecGlobalInAuths 1.3.6.1.4.1.9.9.171.1.3.1.12
The total number of inbound authentication's performed by all current and previous IPsec Phase-2 Tunnels.
OBJECT-TYPE    
  Counter32  

cipSecGlobalInAuthFails 1.3.6.1.4.1.9.9.171.1.3.1.13
The total number of inbound authentication's which ended in failure by all current and previous IPsec Phase-2 Tunnels.
OBJECT-TYPE    
  Counter32  

cipSecGlobalInDecrypts 1.3.6.1.4.1.9.9.171.1.3.1.14
The total number of inbound decryption's performed by all current and previous IPsec Phase-2 Tunnels.
OBJECT-TYPE    
  Counter32  

cipSecGlobalInDecryptFails 1.3.6.1.4.1.9.9.171.1.3.1.15
The total number of inbound decryption's which ended in failure by all current and previous IPsec Phase-2 Tunnels.
OBJECT-TYPE    
  Counter32  

cipSecGlobalOutOctets 1.3.6.1.4.1.9.9.171.1.3.1.16
The total number of octets sent by all current and previous IPsec Phase-2 Tunnels. This value is accumulated AFTER determining whether or not the packet should be compressed. See also cipSecGlobalOutOctWraps for the number of times this counter has wrapped.
OBJECT-TYPE    
  Counter32  

cipSecGlobalHcOutOctets 1.3.6.1.4.1.9.9.171.1.3.1.17
A high capacity count of the total number of octets sent by all current and previous IPsec Phase-2 Tunnels. This value is accumulated AFTER determining whether or not the packet should be compressed.
OBJECT-TYPE    
  Counter64  

cipSecGlobalOutOctWraps 1.3.6.1.4.1.9.9.171.1.3.1.18
The number of times the global octets sent counter (cipSecGlobalOutOctets) has wrapped.
OBJECT-TYPE    
  Counter32  

cipSecGlobalOutUncompOctets 1.3.6.1.4.1.9.9.171.1.3.1.19
The total number of uncompressed octets sent by all current and previous IPsec Phase-2 Tunnels. This value is accumulated BEFORE the packet is compressed. If compression is not being used, this value will match the value of cipSecGlobalOutOctets. See also cipSecGlobalOutDecompOctWraps for the number of times this counter has wrapped.
OBJECT-TYPE    
  Counter32  

cipSecGlobalHcOutUncompOctets 1.3.6.1.4.1.9.9.171.1.3.1.20
A high capacity count of the total number of uncompressed octets sent by all current and previous IPsec Phase-2 Tunnels. This value is accumulated BEFORE the packet is compressed. If compression is not being used, this value will match the value of cipSecGlobalHcOutOctets.
OBJECT-TYPE    
  Counter64  

cipSecGlobalOutUncompOctWraps 1.3.6.1.4.1.9.9.171.1.3.1.21
The number of times the global uncompressed octets sent counter (cipSecGlobalOutUncompOctets) has wrapped.
OBJECT-TYPE    
  Counter32  

cipSecGlobalOutPkts 1.3.6.1.4.1.9.9.171.1.3.1.22
The total number of packets sent by all current and previous IPsec Phase-2 Tunnels.
OBJECT-TYPE    
  Counter32  

cipSecGlobalOutDrops 1.3.6.1.4.1.9.9.171.1.3.1.23
The total number of packets dropped during send processing by all current and previous IPsec Phase-2 Tunnels.
OBJECT-TYPE    
  Counter32  

cipSecGlobalOutAuths 1.3.6.1.4.1.9.9.171.1.3.1.24
The total number of outbound authentication's performed by all current and previous IPsec Phase-2 Tunnels.
OBJECT-TYPE    
  Counter32  

cipSecGlobalOutAuthFails 1.3.6.1.4.1.9.9.171.1.3.1.25
The total number of outbound authentication's which ended in failure by all current and previous IPsec Phase-2 Tunnels.
OBJECT-TYPE    
  Counter32  

cipSecGlobalOutEncrypts 1.3.6.1.4.1.9.9.171.1.3.1.26
The total number of outbound encryption's performed by all current and previous IPsec Phase-2 Tunnels.
OBJECT-TYPE    
  Counter32  

cipSecGlobalOutEncryptFails 1.3.6.1.4.1.9.9.171.1.3.1.27
The total number of outbound encryption's which ended in failure by all current and previous IPsec Phase-2 Tunnels.
OBJECT-TYPE    
  Counter32  

cipSecGlobalProtocolUseFails 1.3.6.1.4.1.9.9.171.1.3.1.28
The total number of protocol use failures which occurred during processing of all current and previously active IPsec Phase-2 Tunnels.
OBJECT-TYPE    
  Counter32  

cipSecGlobalNoSaFails 1.3.6.1.4.1.9.9.171.1.3.1.29
The total number of non-existent Security Association in failures which occurred during processing of all current and previous IPsec Phase-2 Tunnels.
OBJECT-TYPE    
  Counter32  

cipSecGlobalSysCapFails 1.3.6.1.4.1.9.9.171.1.3.1.30
The total number of system capacity failures which occurred during processing of all current and previously active IPsec Phase-2 Tunnels.
OBJECT-TYPE    
  Counter32  

cipSecTunnelTable 1.3.6.1.4.1.9.9.171.1.3.2
The IPsec Phase-2 Tunnel Table. There is one entry in this table for each active IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  SEQUENCE OF  
    CipSecTunnelEntry

cipSecTunnelEntry 1.3.6.1.4.1.9.9.171.1.3.2.1
Each entry contains the attributes associated with an active IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  CipSecTunnelEntry  

cipSecTunIndex 1.3.6.1.4.1.9.9.171.1.3.2.1.1
The index of the IPsec Phase-2 Tunnel Table. The value of the index is a number which begins at one and is incremented with each tunnel that is created. The value of this object will wrap at 2,147,483,647.
OBJECT-TYPE    
  Integer32 1..2147483647  

cipSecTunIkeTunnelIndex 1.3.6.1.4.1.9.9.171.1.3.2.1.2
The index of the associated IPsec Phase-1 IKE Tunnel. (cikeTunIndex in the cikeTunnelTable)
OBJECT-TYPE    
  Integer32 1..2147483647  

cipSecTunIkeTunnelAlive 1.3.6.1.4.1.9.9.171.1.3.2.1.3
An indicator which specifies whether or not the IPsec Phase-1 IKE Tunnel currently exists.
OBJECT-TYPE    
  TruthValue  

cipSecTunLocalAddr 1.3.6.1.4.1.9.9.171.1.3.2.1.4
The IP address of the local endpoint for the IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  IPSIpAddress  

cipSecTunRemoteAddr 1.3.6.1.4.1.9.9.171.1.3.2.1.5
The IP address of the remote endpoint for the IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  IPSIpAddress  

cipSecTunKeyType 1.3.6.1.4.1.9.9.171.1.3.2.1.6
The type of key used by the IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  KeyType  

cipSecTunEncapMode 1.3.6.1.4.1.9.9.171.1.3.2.1.7
The encapsulation mode used by the IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  EncapMode  

cipSecTunLifeSize 1.3.6.1.4.1.9.9.171.1.3.2.1.8
The negotiated LifeSize of the IPsec Phase-2 Tunnel in kilobytes.
OBJECT-TYPE    
  Integer32 1..2147483647  

cipSecTunLifeTime 1.3.6.1.4.1.9.9.171.1.3.2.1.9
The negotiated LifeTime of the IPsec Phase-2 Tunnel in seconds.
OBJECT-TYPE    
  Integer32 1..2147483647  

cipSecTunActiveTime 1.3.6.1.4.1.9.9.171.1.3.2.1.10
The length of time the IPsec Phase-2 Tunnel has been active in hundredths of seconds.
OBJECT-TYPE    
  TimeInterval  

cipSecTunSaLifeSizeThreshold 1.3.6.1.4.1.9.9.171.1.3.2.1.11
The security association LifeSize refresh threshold in kilobytes.
OBJECT-TYPE    
  Integer32 1..2147483647  

cipSecTunSaLifeTimeThreshold 1.3.6.1.4.1.9.9.171.1.3.2.1.12
The security association LifeTime refresh threshold in seconds.
OBJECT-TYPE    
  Integer32 1..2147483647  

cipSecTunTotalRefreshes 1.3.6.1.4.1.9.9.171.1.3.2.1.13
The total number of security association refreshes performed.
OBJECT-TYPE    
  Counter32  

cipSecTunExpiredSaInstances 1.3.6.1.4.1.9.9.171.1.3.2.1.14
The total number of security associations which have expired.
OBJECT-TYPE    
  Counter32  

cipSecTunCurrentSaInstances 1.3.6.1.4.1.9.9.171.1.3.2.1.15
The number of security associations which are currently active or expiring.
OBJECT-TYPE    
  Gauge32  

cipSecTunInSaDiffHellmanGrp 1.3.6.1.4.1.9.9.171.1.3.2.1.16
The Diffie Hellman Group used by the inbound security association of the IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  DiffHellmanGrp  

cipSecTunInSaEncryptAlgo 1.3.6.1.4.1.9.9.171.1.3.2.1.17
The encryption algorithm used by the inbound security association of the IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  EncryptAlgo  

cipSecTunInSaAhAuthAlgo 1.3.6.1.4.1.9.9.171.1.3.2.1.18
The authentication algorithm used by the inbound authentication header (AH) security association of the IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  AuthAlgo  

cipSecTunInSaEspAuthAlgo 1.3.6.1.4.1.9.9.171.1.3.2.1.19
The authentication algorithm used by the inbound encapsulation security protocol (ESP) security association of the IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  AuthAlgo  

cipSecTunInSaDecompAlgo 1.3.6.1.4.1.9.9.171.1.3.2.1.20
The decompression algorithm used by the inbound security association of the IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  CompAlgo  

cipSecTunOutSaDiffHellmanGrp 1.3.6.1.4.1.9.9.171.1.3.2.1.21
The Diffie Hellman Group used by the outbound security association of the IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  DiffHellmanGrp  

cipSecTunOutSaEncryptAlgo 1.3.6.1.4.1.9.9.171.1.3.2.1.22
The encryption algorithm used by the outbound security association of the IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  EncryptAlgo  

cipSecTunOutSaAhAuthAlgo 1.3.6.1.4.1.9.9.171.1.3.2.1.23
The authentication algorithm used by the outbound authentication header (AH) security association of the IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  AuthAlgo  

cipSecTunOutSaEspAuthAlgo 1.3.6.1.4.1.9.9.171.1.3.2.1.24
The authentication algorithm used by the inbound encapsulation security protocol (ESP) security association of the IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  AuthAlgo  

cipSecTunOutSaCompAlgo 1.3.6.1.4.1.9.9.171.1.3.2.1.25
The compression algorithm used by the inbound security association of the IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  CompAlgo  

cipSecTunInOctets 1.3.6.1.4.1.9.9.171.1.3.2.1.26
The total number of octets received by this IPsec Phase-2 Tunnel. This value is accumulated BEFORE determining whether or not the packet should be decompressed. See also cipSecTunInOctWraps for the number of times this counter has wrapped.
OBJECT-TYPE    
  Counter32  

cipSecTunHcInOctets 1.3.6.1.4.1.9.9.171.1.3.2.1.27
A high capacity count of the total number of octets received by this IPsec Phase-2 Tunnel. This value is accumulated BEFORE determining whether or not the packet should be decompressed.
OBJECT-TYPE    
  Counter64  

cipSecTunInOctWraps 1.3.6.1.4.1.9.9.171.1.3.2.1.28
The number of times the octets received counter (cipSecTunInOctets) has wrapped.
OBJECT-TYPE    
  Counter32  

cipSecTunInDecompOctets 1.3.6.1.4.1.9.9.171.1.3.2.1.29
The total number of decompressed octets received by this IPsec Phase-2 Tunnel. This value is accumulated AFTER the packet is decompressed. If compression is not being used, this value will match the value of cipSecTunInOctets. See also cipSecTunInDecompOctWraps for the number of times this counter has wrapped.
OBJECT-TYPE    
  Counter32  

cipSecTunHcInDecompOctets 1.3.6.1.4.1.9.9.171.1.3.2.1.30
A high capacity count of the total number of decompressed octets received by this IPsec Phase-2 Tunnel. This value is accumulated AFTER the packet is decompressed. If compression is not being used, this value will match the value of cipSecTunHcInOctets.
OBJECT-TYPE    
  Counter64  

cipSecTunInDecompOctWraps 1.3.6.1.4.1.9.9.171.1.3.2.1.31
The number of times the decompressed octets received counter (cipSecTunInDecompOctets) has wrapped.
OBJECT-TYPE    
  Counter32  

cipSecTunInPkts 1.3.6.1.4.1.9.9.171.1.3.2.1.32
The total number of packets received by this IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  Counter32  

cipSecTunInDropPkts 1.3.6.1.4.1.9.9.171.1.3.2.1.33
The total number of packets dropped during receive processing by this IPsec Phase-2 Tunnel. This count does NOT include packets dropped due to Anti-Replay processing.
OBJECT-TYPE    
  Counter32  

cipSecTunInReplayDropPkts 1.3.6.1.4.1.9.9.171.1.3.2.1.34
The total number of packets dropped during receive processing due to Anti-Replay processing by this IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  Counter32  

cipSecTunInAuths 1.3.6.1.4.1.9.9.171.1.3.2.1.35
The total number of inbound authentication's performed by this IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  Counter32  

cipSecTunInAuthFails 1.3.6.1.4.1.9.9.171.1.3.2.1.36
The total number of inbound authentication's which ended in failure by this IPsec Phase-2 Tunnel .
OBJECT-TYPE    
  Counter32  

cipSecTunInDecrypts 1.3.6.1.4.1.9.9.171.1.3.2.1.37
The total number of inbound decryption's performed by this IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  Counter32  

cipSecTunInDecryptFails 1.3.6.1.4.1.9.9.171.1.3.2.1.38
The total number of inbound decryption's which ended in failure by this IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  Counter32  

cipSecTunOutOctets 1.3.6.1.4.1.9.9.171.1.3.2.1.39
The total number of octets sent by this IPsec Phase-2 Tunnel. This value is accumulated AFTER determining whether or not the packet should be compressed. See also cipSecTunOutOctWraps for the number of times this counter has wrapped.
OBJECT-TYPE    
  Counter32  

cipSecTunHcOutOctets 1.3.6.1.4.1.9.9.171.1.3.2.1.40
A high capacity count of the total number of octets sent by this IPsec Phase-2 Tunnel. This value is accumulated AFTER determining whether or not the packet should be compressed.
OBJECT-TYPE    
  Counter64  

cipSecTunOutOctWraps 1.3.6.1.4.1.9.9.171.1.3.2.1.41
The number of times the out octets counter (cipSecTunOutOctets) has wrapped.
OBJECT-TYPE    
  Counter32  

cipSecTunOutUncompOctets 1.3.6.1.4.1.9.9.171.1.3.2.1.42
The total number of uncompressed octets sent by this IPsec Phase-2 Tunnel. This value is accumulated BEFORE the packet is compressed. If compression is not being used, this value will match the value of cipSecTunOutOctets. See also cipSecTunOutDecompOctWraps for the number of times this counter has wrapped.
OBJECT-TYPE    
  Counter32  

cipSecTunHcOutUncompOctets 1.3.6.1.4.1.9.9.171.1.3.2.1.43
A high capacity count of the total number of uncompressed octets sent by this IPsec Phase-2 Tunnel. This value is accumulated BEFORE the packet is compressed. If compression is not being used, this value will match the value of cipSecTunHcOutOctets.
OBJECT-TYPE    
  Counter64  

cipSecTunOutUncompOctWraps 1.3.6.1.4.1.9.9.171.1.3.2.1.44
The number of times the uncompressed octets sent counter (cipSecTunOutUncompOctets) has wrapped.
OBJECT-TYPE    
  Counter32  

cipSecTunOutPkts 1.3.6.1.4.1.9.9.171.1.3.2.1.45
The total number of packets sent by this IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  Counter32  

cipSecTunOutDropPkts 1.3.6.1.4.1.9.9.171.1.3.2.1.46
The total number of packets dropped during send processing by this IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  Counter32  

cipSecTunOutAuths 1.3.6.1.4.1.9.9.171.1.3.2.1.47
The total number of outbound authentication's performed by this IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  Counter32  

cipSecTunOutAuthFails 1.3.6.1.4.1.9.9.171.1.3.2.1.48
The total number of outbound authentication's which ended in failure by this IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  Counter32  

cipSecTunOutEncrypts 1.3.6.1.4.1.9.9.171.1.3.2.1.49
The total number of outbound encryption's performed by this IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  Counter32  

cipSecTunOutEncryptFails 1.3.6.1.4.1.9.9.171.1.3.2.1.50
The total number of outbound encryption's which ended in failure by this IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  Counter32  

cipSecTunStatus 1.3.6.1.4.1.9.9.171.1.3.2.1.51
The status of the MIB table row. This object can be used to bring the tunnel down by setting value of this object to destroy(2). When the value is set to destroy(2), the SA bundle is destroyed and this row is deleted from this table. When this MIB value is queried, the value of active(1) is always returned, if the instance exists. This object cannot be used to create a MIB table row.
OBJECT-TYPE    
  TunnelStatus  

cipSecEndPtTable 1.3.6.1.4.1.9.9.171.1.3.3
The IPsec Phase-2 Tunnel Endpoint Table. This table contains an entry for each active endpoint associated with an IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  SEQUENCE OF  
    CipSecEndPtEntry

cipSecEndPtEntry 1.3.6.1.4.1.9.9.171.1.3.3.1
An IPsec Phase-2 Tunnel Endpoint entry.
OBJECT-TYPE    
  CipSecEndPtEntry  

cipSecEndPtIndex 1.3.6.1.4.1.9.9.171.1.3.3.1.1
The number of the Endpoint associated with the IPsec Phase-2 Tunnel Table. The value of this index is a number which begins at one and is incremented with each Endpoint associated with an IPsec Phase-2 Tunnel. The value of this object will wrap at 2,147,483,647.
OBJECT-TYPE    
  Integer32 1..2147483647  

cipSecEndPtLocalName 1.3.6.1.4.1.9.9.171.1.3.3.1.2
The DNS name of the local Endpoint.
OBJECT-TYPE    
  DisplayString  

cipSecEndPtLocalType 1.3.6.1.4.1.9.9.171.1.3.3.1.3
The type of identity for the local Endpoint. Possible values are: 1) a single IP address, or 2) an IP address range, or 3) an IP subnet.
OBJECT-TYPE    
  EndPtType  

cipSecEndPtLocalAddr1 1.3.6.1.4.1.9.9.171.1.3.3.1.4
The local Endpoint's first IP address specification. If the local Endpoint type is single IP address, then this is the value of the IP address. If the local Endpoint type is IP subnet, then this is the value of the subnet. If the local Endpoint type is IP address range, then this is the value of beginning IP address of the range.
OBJECT-TYPE    
  IPSIpAddress  

cipSecEndPtLocalAddr2 1.3.6.1.4.1.9.9.171.1.3.3.1.5
The local Endpoint's second IP address specification. If the local Endpoint type is single IP address, then this is the value of the IP address. If the local Endpoint type is IP subnet, then this is the value of the subnet mask. If the local Endpoint type is IP address range, then this is the value of ending IP address of the range.
OBJECT-TYPE    
  IPSIpAddress  

cipSecEndPtLocalProtocol 1.3.6.1.4.1.9.9.171.1.3.3.1.6
The protocol number of the local Endpoint's traffic.
OBJECT-TYPE    
  Integer32 0..255  

cipSecEndPtLocalPort 1.3.6.1.4.1.9.9.171.1.3.3.1.7
The port number of the local Endpoint's traffic.
OBJECT-TYPE    
  Integer32 0..65535  

cipSecEndPtRemoteName 1.3.6.1.4.1.9.9.171.1.3.3.1.8
The DNS name of the remote Endpoint.
OBJECT-TYPE    
  DisplayString  

cipSecEndPtRemoteType 1.3.6.1.4.1.9.9.171.1.3.3.1.9
The type of identity for the remote Endpoint. Possible values are: 1) a single IP address, or 2) an IP address range, or 3) an IP subnet.
OBJECT-TYPE    
  EndPtType  

cipSecEndPtRemoteAddr1 1.3.6.1.4.1.9.9.171.1.3.3.1.10
The remote Endpoint's first IP address specification. If the remote Endpoint type is single IP address, then this is the value of the IP address. If the remote Endpoint type is IP subnet, then this is the value of the subnet. If the remote Endpoint type is IP address range, then this is the value of beginning IP address of the range.
OBJECT-TYPE    
  IPSIpAddress  

cipSecEndPtRemoteAddr2 1.3.6.1.4.1.9.9.171.1.3.3.1.11
The remote Endpoint's second IP address specification. If the remote Endpoint type is single IP address, then this is the value of the IP address. If the remote Endpoint type is IP subnet, then this is the value of the subnet mask. If the remote Endpoint type is IP address range, then this is the value of ending IP address of the range.
OBJECT-TYPE    
  IPSIpAddress  

cipSecEndPtRemoteProtocol 1.3.6.1.4.1.9.9.171.1.3.3.1.12
The protocol number of the remote Endpoint's traffic.
OBJECT-TYPE    
  Integer32 0..255  

cipSecEndPtRemotePort 1.3.6.1.4.1.9.9.171.1.3.3.1.13
The port number of the remote Endpoint's traffic.
OBJECT-TYPE    
  Integer32 0..65535  

cipSecSpiTable 1.3.6.1.4.1.9.9.171.1.3.4
The IPsec Phase-2 Security Protection Index Table. This table contains an entry for each active and expiring security association.
OBJECT-TYPE    
  SEQUENCE OF  
    CipSecSpiEntry

cipSecSpiEntry 1.3.6.1.4.1.9.9.171.1.3.4.1
Each entry contains the attributes associated with active and expiring IPsec Phase-2 security associations.
OBJECT-TYPE    
  CipSecSpiEntry  

cipSecSpiIndex 1.3.6.1.4.1.9.9.171.1.3.4.1.1
The number of the SPI associated with the Phase-2 Tunnel Table. The value of this index is a number which begins at one and is incremented with each SPI associated with an IPsec Phase-2 Tunnel. The value of this object will wrap at 2,147,483,647.
OBJECT-TYPE    
  Integer32 1..2147483647  

cipSecSpiDirection 1.3.6.1.4.1.9.9.171.1.3.4.1.2
The direction of the SPI.
OBJECT-TYPE    
  INTEGER in(1), out(2)  

cipSecSpiValue 1.3.6.1.4.1.9.9.171.1.3.4.1.3
The value of the SPI.
OBJECT-TYPE    
  Unsigned32 1..4294967295  

cipSecSpiProtocol 1.3.6.1.4.1.9.9.171.1.3.4.1.4
The protocol of the SPI.
OBJECT-TYPE    
  INTEGER ah(1), esp(2), ipcomp(3)  

cipSecSpiStatus 1.3.6.1.4.1.9.9.171.1.3.4.1.5
The status of the SPI.
OBJECT-TYPE    
  INTEGER active(1), expiring(2)  

cipSecPhase2GWStatsTable 1.3.6.1.4.1.9.9.171.1.3.5
Phase-2 IPsec stats information is included in this table. Each entry is related to a specific gateway which is identified by 'cmgwIndex'
OBJECT-TYPE    
  SEQUENCE OF  
    CipSecPhase2GWStatsEntry

cipSecPhase2GWStatsEntry 1.3.6.1.4.1.9.9.171.1.3.5.1
Each entry contains the attributes of an Phase-2 IPsec stats information for the related gateway. There is only one entry for each gateway. The entry is created when a gateway up and cannot be deleted.
OBJECT-TYPE    
  CipSecPhase2GWStatsEntry  

cipSecPhase2GWActiveTunnels 1.3.6.1.4.1.9.9.171.1.3.5.1.1
The total number of currently active IPsec Phase-2 Tunnels.
OBJECT-TYPE    
  Gauge32  

cipSecPhase2GWPreviousTunnels 1.3.6.1.4.1.9.9.171.1.3.5.1.2
The total number of previously active IPsec Phase-2 Tunnels.
OBJECT-TYPE    
  Counter32  

cipSecPhase2GWInOctets 1.3.6.1.4.1.9.9.171.1.3.5.1.3
The total number of octets received by all current and previous IPsec Phase-2 Tunnels. This value is accumulated BEFORE determining whether or not the packet should be decompressed. See also cipSecGlobalInOctWraps for the number of times this counter has wrapped.
OBJECT-TYPE    
  Counter32  

cipSecPhase2GWInOctWraps 1.3.6.1.4.1.9.9.171.1.3.5.1.4
The number of times the global octets received counter (cipSecGlobalInOctets) has wrapped.
OBJECT-TYPE    
  Counter32  

cipSecPhase2GWInDecompOctets 1.3.6.1.4.1.9.9.171.1.3.5.1.5
The total number of decompressed octets received by all current and previous IPsec Phase-2 Tunnels. This value is accumulated AFTER the packet is decompressed. If compression is not being used, this value will match the value of cipSecGlobalInOctets. See also cipSecGlobalInDecompOctWraps for the number of times this counter has wrapped.
OBJECT-TYPE    
  Counter32  

cipSecPhase2GWInDecompOctWraps 1.3.6.1.4.1.9.9.171.1.3.5.1.6
The number of times the global decompressed octets received counter (cipSecGlobalInDecompOctets) has wrapped.
OBJECT-TYPE    
  Counter32  

cipSecPhase2GWInPkts 1.3.6.1.4.1.9.9.171.1.3.5.1.7
The total number of packets received by all current and previous IPsec Phase-2 Tunnels.
OBJECT-TYPE    
  Counter32  

cipSecPhase2GWInDrops 1.3.6.1.4.1.9.9.171.1.3.5.1.8
The total number of packets dropped during receive processing by all current and previous IPsec Phase-2 Tunnels. This count does NOT include packets dropped due to Anti-Replay processing.
OBJECT-TYPE    
  Counter32  

cipSecPhase2GWInReplayDrops 1.3.6.1.4.1.9.9.171.1.3.5.1.9
The total number of packets dropped during receive processing due to Anti-Replay processing by all current and previous IPsec Phase-2 Tunnels.
OBJECT-TYPE    
  Counter32  

cipSecPhase2GWInAuths 1.3.6.1.4.1.9.9.171.1.3.5.1.10
The total number of inbound authentication's performed by all current and previous IPsec Phase-2 Tunnels.
OBJECT-TYPE    
  Counter32  

cipSecPhase2GWInAuthFails 1.3.6.1.4.1.9.9.171.1.3.5.1.11
The total number of inbound authentication's which ended in failure by all current and previous IPsec Phase-2 Tunnels.
OBJECT-TYPE    
  Counter32  

cipSecPhase2GWInDecrypts 1.3.6.1.4.1.9.9.171.1.3.5.1.12
The total number of inbound decryption's performed by all current and previous IPsec Phase-2 Tunnels.
OBJECT-TYPE    
  Counter32  

cipSecPhase2GWInDecryptFails 1.3.6.1.4.1.9.9.171.1.3.5.1.13
The total number of inbound decryption's which ended in failure by all current and previous IPsec Phase-2 Tunnels.
OBJECT-TYPE    
  Counter32  

cipSecPhase2GWOutOctets 1.3.6.1.4.1.9.9.171.1.3.5.1.14
The total number of octets sent by all current and previous IPsec Phase-2 Tunnels. This value is accumulated AFTER determining whether or not the packet should be compressed. See also cipSecGlobalOutOctWraps for the number of times this counter has wrapped.
OBJECT-TYPE    
  Counter32  

cipSecPhase2GWOutOctWraps 1.3.6.1.4.1.9.9.171.1.3.5.1.15
The number of times the global octets sent counter (cipSecGlobalOutOctets) has wrapped.
OBJECT-TYPE    
  Counter32  

cipSecPhase2GWOutUncompOctets 1.3.6.1.4.1.9.9.171.1.3.5.1.16
The total number of uncompressed octets sent by all current and previous IPsec Phase-2 Tunnels. This value is accumulated BEFORE the packet is compressed. If compression is not being used, this value will match the value of cipSecGlobalOutOctets. See also cipSecGlobalOutDecompOctWraps for the number of times this counter has wrapped.
OBJECT-TYPE    
  Counter32  

cipSecPhase2GWOutUncompOctWraps 1.3.6.1.4.1.9.9.171.1.3.5.1.17
The number of times the global uncompressed octets sent counter (cipSecGlobalOutUncompOctets) has wrapped.
OBJECT-TYPE    
  Counter32  

cipSecPhase2GWOutPkts 1.3.6.1.4.1.9.9.171.1.3.5.1.18
The total number of packets sent by all current and previous IPsec Phase-2 Tunnels.
OBJECT-TYPE    
  Counter32  

cipSecPhase2GWOutDrops 1.3.6.1.4.1.9.9.171.1.3.5.1.19
The total number of packets dropped during send processing by all current and previous IPsec Phase-2 Tunnels.
OBJECT-TYPE    
  Counter32  

cipSecPhase2GWOutAuths 1.3.6.1.4.1.9.9.171.1.3.5.1.20
The total number of outbound authentication's performed by all current and previous IPsec Phase-2 Tunnels.
OBJECT-TYPE    
  Counter32  

cipSecPhase2GWOutAuthFails 1.3.6.1.4.1.9.9.171.1.3.5.1.21
The total number of outbound authentication's which ended in failure by all current and previous IPsec Phase-2 Tunnels.
OBJECT-TYPE    
  Counter32  

cipSecPhase2GWOutEncrypts 1.3.6.1.4.1.9.9.171.1.3.5.1.22
The total number of outbound encryption's performed by all current and previous IPsec Phase-2 Tunnels.
OBJECT-TYPE    
  Counter32  

cipSecPhase2GWOutEncryptFails 1.3.6.1.4.1.9.9.171.1.3.5.1.23
The total number of outbound encryption's which ended in failure by all current and previous IPsec Phase-2 Tunnels.
OBJECT-TYPE    
  Counter32  

cipSecPhase2GWProtocolUseFails 1.3.6.1.4.1.9.9.171.1.3.5.1.24
The total number of protocol use failures which occurred during processing of all current and previously active IPsec Phase-2 Tunnels.
OBJECT-TYPE    
  Counter32  

cipSecPhase2GWNoSaFails 1.3.6.1.4.1.9.9.171.1.3.5.1.25
The total number of non-existent Security Association in failures which occurred during processing of all current and previous IPsec Phase-2 Tunnels.
OBJECT-TYPE    
  Counter32  

cipSecPhase2GWSysCapFails 1.3.6.1.4.1.9.9.171.1.3.5.1.26
The total number of system capacity failures which occurred during processing of all current and previously active IPsec Phase-2 Tunnels.
OBJECT-TYPE    
  Counter32  

cipSecHistory 1.3.6.1.4.1.9.9.171.1.4
OBJECT IDENTIFIER    

cipSecHistGlobal 1.3.6.1.4.1.9.9.171.1.4.1
OBJECT IDENTIFIER    

cipSecHistGlobalCntl 1.3.6.1.4.1.9.9.171.1.4.1.1
OBJECT IDENTIFIER    

cipSecHistTableSize 1.3.6.1.4.1.9.9.171.1.4.1.1.1
The window size of the IPsec Phase-1 and Phase-2 History Tables. The IPsec Phase-1 and Phase-2 History Tables are implemented as a sliding window in which only the last n entries are maintained. This object is used specify the number of entries which will be maintained in the IPsec Phase-1 and Phase-2 History Tables. An implementation may choose suitable minimum and maximum values for this element based on the local policy and available resources. If an SNMP SET request specifies a value outside this window for this element, a BAD VALUE may be returned.
OBJECT-TYPE    
  Integer32 1..2147483647  

cipSecHistCheckPoint 1.3.6.1.4.1.9.9.171.1.4.1.1.2
The current state of check point processing. This object will return ready when the agent is ready to create on-demand history entries for active IPsec Tunnels or checkPoint when the agent is currently creating on-demand history entries for active IPsec Tunnels. By setting this value to checkPoint, the agent will create: a) an entry in the IPsec Phase-1 Tunnel History for each active IPsec Phase-1 Tunnel and b) an entry in the IPsec Phase-2 Tunnel History Table and an entry in the IPsec Phase-2 Tunnel EndPoint History Table for each active IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  INTEGER ready(1), checkPoint(2)  

cipSecHistPhaseOne 1.3.6.1.4.1.9.9.171.1.4.2
OBJECT IDENTIFIER    

cikeTunnelHistTable 1.3.6.1.4.1.9.9.171.1.4.2.1
The IPsec Phase-1 Internet Key Exchange Tunnel History Table. This table is implemented as a sliding window in which only the last n entries are maintained. The maximum number of entries is specified by the cipSecHistTableSize object.
OBJECT-TYPE    
  SEQUENCE OF  
    CikeTunnelHistEntry

cikeTunnelHistEntry 1.3.6.1.4.1.9.9.171.1.4.2.1.1
Each entry contains the attributes associated with a previously active IPsec Phase-1 IKE Tunnel.
OBJECT-TYPE    
  CikeTunnelHistEntry  

cikeTunHistIndex 1.3.6.1.4.1.9.9.171.1.4.2.1.1.1
The index of the IPsec Phase-1 IKE Tunnel History Table. The value of the index is a number which begins at one and is incremented with each tunnel that ends. The value of this object will wrap at 2,147,483,647.
OBJECT-TYPE    
  Integer32 1..2147483647  

cikeTunHistTermReason 1.3.6.1.4.1.9.9.171.1.4.2.1.1.2
The reason the IPsec Phase-1 IKE Tunnel was terminated. Possible reasons include: 1 = other 2 = normal termination 3 = operator request 4 = peer delete request was received 5 = contact with peer was lost 6 = local failure occurred. 7 = operator initiated check point request
OBJECT-TYPE    
  INTEGER other(1), normal(2), operRequest(3), peerDelRequest(4), peerLost(5), localFailure(6), checkPointReg(7)  

cikeTunHistActiveIndex 1.3.6.1.4.1.9.9.171.1.4.2.1.1.3
The index of the previously active IPsec Phase-1 IKE Tunnel.
OBJECT-TYPE    
  Integer32 1..2147483647  

cikeTunHistPeerLocalType 1.3.6.1.4.1.9.9.171.1.4.2.1.1.4
The type of local peer identity. The local peer may be identified by: 1. an IP address, or 2. a host name.
OBJECT-TYPE    
  IkePeerType  

cikeTunHistPeerLocalValue 1.3.6.1.4.1.9.9.171.1.4.2.1.1.5
The value of the local peer identity. If the local peer type is an IP Address, then this is the IP Address used to identify the local peer. If the local peer type is a host name, then this is the host name used to identify the local peer.
OBJECT-TYPE    
  DisplayString  

cikeTunHistPeerIntIndex 1.3.6.1.4.1.9.9.171.1.4.2.1.1.6
The internal index of the local-remote peer association. This internal index is used to uniquely identify multiple associations between the local and remote peer.
OBJECT-TYPE    
  Integer32 1..2147483647  

cikeTunHistPeerRemoteType 1.3.6.1.4.1.9.9.171.1.4.2.1.1.7
The type of remote peer identity. The remote peer may be identified by: 1. an IP address, or 2. a host name.
OBJECT-TYPE    
  IkePeerType  

cikeTunHistPeerRemoteValue 1.3.6.1.4.1.9.9.171.1.4.2.1.1.8
The value of the remote peer identity. If the remote peer type is an IP Address, then this is the IP Address used to identify the remote peer. If the remote peer type is a host name, then this is the host name used to identify the remote peer.
OBJECT-TYPE    
  DisplayString  

cikeTunHistLocalAddr 1.3.6.1.4.1.9.9.171.1.4.2.1.1.9
The IP address of the local endpoint for the IPsec Phase-1 IKE Tunnel.
OBJECT-TYPE    
  IPSIpAddress  

cikeTunHistLocalName 1.3.6.1.4.1.9.9.171.1.4.2.1.1.10
The DNS name of the local IP address for the IPsec Phase-1 IKE Tunnel. If the DNS name associated with the local tunnel endpoint is not known, then the value of this object will be a NULL string.
OBJECT-TYPE    
  DisplayString  

cikeTunHistRemoteAddr 1.3.6.1.4.1.9.9.171.1.4.2.1.1.11
The IP address of the remote endpoint for the IPsec Phase-1 IKE Tunnel.
OBJECT-TYPE    
  IPSIpAddress  

cikeTunHistRemoteName 1.3.6.1.4.1.9.9.171.1.4.2.1.1.12
The DNS name of the remote IP address of IPsec Phase-1 IKE Tunnel. If the DNS name associated with the remote tunnel endpoint is not known, then the value of this object will be a NULL string.
OBJECT-TYPE    
  DisplayString  

cikeTunHistNegoMode 1.3.6.1.4.1.9.9.171.1.4.2.1.1.13
The negotiation mode of the IPsec Phase-1 IKE Tunnel.
OBJECT-TYPE    
  IkeNegoMode  

cikeTunHistDiffHellmanGrp 1.3.6.1.4.1.9.9.171.1.4.2.1.1.14
The Diffie Hellman Group used in IPsec Phase-1 IKE negotiations.
OBJECT-TYPE    
  DiffHellmanGrp  

cikeTunHistEncryptAlgo 1.3.6.1.4.1.9.9.171.1.4.2.1.1.15
The encryption algorithm used in IPsec Phase-1 IKE negotiations.
OBJECT-TYPE    
  EncryptAlgo  

cikeTunHistHashAlgo 1.3.6.1.4.1.9.9.171.1.4.2.1.1.16
The hash algorithm used in IPsec Phase-1 IKE negotiations.
OBJECT-TYPE    
  IkeHashAlgo  

cikeTunHistAuthMethod 1.3.6.1.4.1.9.9.171.1.4.2.1.1.17
The authentication method used in IPsec Phase-1 IKE negotiations.
OBJECT-TYPE    
  IkeAuthMethod  

cikeTunHistLifeTime 1.3.6.1.4.1.9.9.171.1.4.2.1.1.18
The negotiated LifeTime of the IPsec Phase-1 IKE Tunnel in seconds.
OBJECT-TYPE    
  Integer32 1..2147483647  

cikeTunHistStartTime 1.3.6.1.4.1.9.9.171.1.4.2.1.1.19
The value of sysUpTime in hundredths of seconds when the IPsec Phase-1 IKE tunnel was started.
OBJECT-TYPE    
  TimeStamp  

cikeTunHistActiveTime 1.3.6.1.4.1.9.9.171.1.4.2.1.1.20
The length of time the IPsec Phase-1 IKE tunnel was been active in hundredths of seconds.
OBJECT-TYPE    
  TimeInterval  

cikeTunHistTotalRefreshes 1.3.6.1.4.1.9.9.171.1.4.2.1.1.21
The total number of security associations refreshes performed.
OBJECT-TYPE    
  Counter32  

cikeTunHistTotalSas 1.3.6.1.4.1.9.9.171.1.4.2.1.1.22
The total number of security associations used during the life of the IPsec Phase-1 IKE Tunnel.
OBJECT-TYPE    
  Counter32  

cikeTunHistInOctets 1.3.6.1.4.1.9.9.171.1.4.2.1.1.23
The total number of octets received by this IPsec Phase-1 IKE Tunnel.
OBJECT-TYPE    
  Counter32  

cikeTunHistInPkts 1.3.6.1.4.1.9.9.171.1.4.2.1.1.24
The total number of packets received by this IPsec Phase-1 IKE Tunnel.
OBJECT-TYPE    
  Counter32  

cikeTunHistInDropPkts 1.3.6.1.4.1.9.9.171.1.4.2.1.1.25
The total number of packets dropped by this IPsec Phase-1 IKE Tunnel during receive processing.
OBJECT-TYPE    
  Counter32  

cikeTunHistInNotifys 1.3.6.1.4.1.9.9.171.1.4.2.1.1.26
The total number of notifys received by this IPsec Phase-1 IKE Tunnel.
OBJECT-TYPE    
  Counter32  

cikeTunHistInP2Exchgs 1.3.6.1.4.1.9.9.171.1.4.2.1.1.27
The total number of IPsec Phase-2 exchanges received by this IPsec Phase-1 IKE Tunnel.
OBJECT-TYPE    
  Counter32  

cikeTunHistInP2ExchgInvalids 1.3.6.1.4.1.9.9.171.1.4.2.1.1.28
The total number of IPsec Phase-2 exchanges received and found to be invalid by this IPsec Phase-1 IKE Tunnel.
OBJECT-TYPE    
  Counter32  

cikeTunHistInP2ExchgRejects 1.3.6.1.4.1.9.9.171.1.4.2.1.1.29
The total number of IPsec Phase-2 exchanges received and rejected by this IPsec Phase-1 IKE Tunnel.
OBJECT-TYPE    
  Counter32  

cikeTunHistInP2SaDelRequests 1.3.6.1.4.1.9.9.171.1.4.2.1.1.30
The total number of IPsec Phase-2 security association delete requests received by this IPsec Phase-1 IKE Tunnel.
OBJECT-TYPE    
  Counter32  

cikeTunHistOutOctets 1.3.6.1.4.1.9.9.171.1.4.2.1.1.31
The total number of octets sent by this IPsec Phase-1 IKE Tunnel.
OBJECT-TYPE    
  Counter32  

cikeTunHistOutPkts 1.3.6.1.4.1.9.9.171.1.4.2.1.1.32
The total number of packets sent by this IPsec Phase-1 IKE Tunnel.
OBJECT-TYPE    
  Counter32  

cikeTunHistOutDropPkts 1.3.6.1.4.1.9.9.171.1.4.2.1.1.33
The total number of packets dropped by this IPsec Phase-1 IKE Tunnel during send processing.
OBJECT-TYPE    
  Counter32  

cikeTunHistOutNotifys 1.3.6.1.4.1.9.9.171.1.4.2.1.1.34
The total number of notifys sent by this IPsec Phase-1 IKE Tunnel.
OBJECT-TYPE    
  Counter32  

cikeTunHistOutP2Exchgs 1.3.6.1.4.1.9.9.171.1.4.2.1.1.35
The total number of IPsec Phase-2 exchanges sent by this IPsec Phase-1 IKE Tunnel.
OBJECT-TYPE    
  Counter32  

cikeTunHistOutP2ExchgInvalids 1.3.6.1.4.1.9.9.171.1.4.2.1.1.36
The total number of IPsec Phase-2 exchanges sent and found to be invalid by this IPsec Phase-1 IKE Tunnel.
OBJECT-TYPE    
  Counter32  

cikeTunHistOutP2ExchgRejects 1.3.6.1.4.1.9.9.171.1.4.2.1.1.37
The total number of IPsec Phase-2 exchanges sent and rejected by this IPsec Phase-1 IKE Tunnel.
OBJECT-TYPE    
  Counter32  

cikeTunHistOutP2SaDelRequests 1.3.6.1.4.1.9.9.171.1.4.2.1.1.38
The total number of IPsec Phase-2 security association delete requests sent by this IPsec Phase-1 IKE Tunnel.
OBJECT-TYPE    
  Counter32  

cipSecHistPhaseTwo 1.3.6.1.4.1.9.9.171.1.4.3
OBJECT IDENTIFIER    

cipSecTunnelHistTable 1.3.6.1.4.1.9.9.171.1.4.3.1
The IPsec Phase-2 Tunnel History Table. This table is implemented as a sliding window in which only the last n entries are maintained. The maximum number of entries is specified by the cipSecHistTableSize object.
OBJECT-TYPE    
  SEQUENCE OF  
    CipSecTunnelHistEntry

cipSecTunnelHistEntry 1.3.6.1.4.1.9.9.171.1.4.3.1.1
Each entry contains the attributes associated with a previously active IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  CipSecTunnelHistEntry  

cipSecTunHistIndex 1.3.6.1.4.1.9.9.171.1.4.3.1.1.1
The index of the IPsec Phase-2 Tunnel History Table. The value of the index is a number which begins at one and is incremented with each tunnel that ends. The value of this object will wrap at 2,147,483,647.
OBJECT-TYPE    
  Integer32 1..2147483647  

cipSecTunHistTermReason 1.3.6.1.4.1.9.9.171.1.4.3.1.1.2
The reason the IPsec Phase-2 Tunnel was terminated. Possible reasons include: 1 = other 2 = normal termination 3 = operator request 4 = peer delete request was received 5 = contact with peer was lost 6 = local failure occurred 7 = operator initiated check point request
OBJECT-TYPE    
  INTEGER other(1), normal(2), operRequest(3), peerDelRequest(4), peerLost(5), seqNumRollOver(6), checkPointReq(7)  

cipSecTunHistActiveIndex 1.3.6.1.4.1.9.9.171.1.4.3.1.1.3
The index of the previously active IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  Integer32 1..2147483647  

cipSecTunHistIkeTunnelIndex 1.3.6.1.4.1.9.9.171.1.4.3.1.1.4
The index of the associated IPsec Phase-1 Tunnel (cikeTunIndex in the cikeTunnelTable).
OBJECT-TYPE    
  Integer32 1..2147483647  

cipSecTunHistLocalAddr 1.3.6.1.4.1.9.9.171.1.4.3.1.1.5
The IP address of the local endpoint for the IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  IPSIpAddress  

cipSecTunHistRemoteAddr 1.3.6.1.4.1.9.9.171.1.4.3.1.1.6
The IP address of the remote endpoint for the IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  IPSIpAddress  

cipSecTunHistKeyType 1.3.6.1.4.1.9.9.171.1.4.3.1.1.7
The type of key used by the IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  KeyType  

cipSecTunHistEncapMode 1.3.6.1.4.1.9.9.171.1.4.3.1.1.8
The encapsulation mode used by the IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  EncapMode  

cipSecTunHistLifeSize 1.3.6.1.4.1.9.9.171.1.4.3.1.1.9
The negotiated LifeSize of the IPsec Phase-2 Tunnel in kilobytes.
OBJECT-TYPE    
  Integer32 1..2147483647  

cipSecTunHistLifeTime 1.3.6.1.4.1.9.9.171.1.4.3.1.1.10
The negotiated LifeTime of the IPsec Phase-2 Tunnel in seconds.
OBJECT-TYPE    
  Integer32 1..2147483647  

cipSecTunHistStartTime 1.3.6.1.4.1.9.9.171.1.4.3.1.1.11
The value of sysUpTime in hundredths of seconds when the IPsec Phase-2 Tunnel was started.
OBJECT-TYPE    
  TimeStamp  

cipSecTunHistActiveTime 1.3.6.1.4.1.9.9.171.1.4.3.1.1.12
The length of time the IPsec Phase-2 Tunnel has been active in hundredths of seconds.
OBJECT-TYPE    
  TimeInterval  

cipSecTunHistTotalRefreshes 1.3.6.1.4.1.9.9.171.1.4.3.1.1.13
The total number of security association refreshes performed.
OBJECT-TYPE    
  Counter32  

cipSecTunHistTotalSas 1.3.6.1.4.1.9.9.171.1.4.3.1.1.14
The total number of security associations used during the life of the IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  Counter32  

cipSecTunHistInSaDiffHellmanGrp 1.3.6.1.4.1.9.9.171.1.4.3.1.1.15
The Diffie Hellman Group used by the inbound security association of the IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  DiffHellmanGrp  

cipSecTunHistInSaEncryptAlgo 1.3.6.1.4.1.9.9.171.1.4.3.1.1.16
The encryption algorithm used by the inbound security association of the IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  EncryptAlgo  

cipSecTunHistInSaAhAuthAlgo 1.3.6.1.4.1.9.9.171.1.4.3.1.1.17
The authentication algorithm used by the inbound authentication header (AH) security association of the IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  AuthAlgo  

cipSecTunHistInSaEspAuthAlgo 1.3.6.1.4.1.9.9.171.1.4.3.1.1.18
The authentication algorithm used by the inbound encapsulation security protocol (ESP) security association of the IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  AuthAlgo  

cipSecTunHistInSaDecompAlgo 1.3.6.1.4.1.9.9.171.1.4.3.1.1.19
The decompression algorithm used by the inbound security association of the IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  CompAlgo  

cipSecTunHistOutSaDiffHellmanGrp 1.3.6.1.4.1.9.9.171.1.4.3.1.1.20
The Diffie Hellman Group used by the outbound security association of the IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  DiffHellmanGrp  

cipSecTunHistOutSaEncryptAlgo 1.3.6.1.4.1.9.9.171.1.4.3.1.1.21
The encryption algorithm used by the outbound security association of the IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  EncryptAlgo  

cipSecTunHistOutSaAhAuthAlgo 1.3.6.1.4.1.9.9.171.1.4.3.1.1.22
The authentication algorithm used by the outbound authentication header (AH) security association of the IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  AuthAlgo  

cipSecTunHistOutSaEspAuthAlgo 1.3.6.1.4.1.9.9.171.1.4.3.1.1.23
The authentication algorithm used by the inbound encapsulation security protocol (ESP) security association of the IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  AuthAlgo  

cipSecTunHistOutSaCompAlgo 1.3.6.1.4.1.9.9.171.1.4.3.1.1.24
The compression algorithm used by the inbound security association of the IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  CompAlgo  

cipSecTunHistInOctets 1.3.6.1.4.1.9.9.171.1.4.3.1.1.25
The total number of octets received by this IPsec Phase-2 Tunnel. This value is accumulated BEFORE determining whether or not the packet should be decompressed. See also cipSecTunInOctWraps for the number of times this counter has wrapped.
OBJECT-TYPE    
  Counter32  

cipSecTunHistHcInOctets 1.3.6.1.4.1.9.9.171.1.4.3.1.1.26
A high capacity count of the total number of octets received by this IPsec Phase-2 Tunnel. This value is accumulated BEFORE determining whether or not the packet should be decompressed.
OBJECT-TYPE    
  Counter64  

cipSecTunHistInOctWraps 1.3.6.1.4.1.9.9.171.1.4.3.1.1.27
The number of times the octets received counter (cipSecTunInOctets) has wrapped.
OBJECT-TYPE    
  Counter32  

cipSecTunHistInDecompOctets 1.3.6.1.4.1.9.9.171.1.4.3.1.1.28
The total number of decompressed octets received by this IPsec Phase-2 Tunnel. This value is accumulated AFTER the packet is decompressed. If compression is not being used, this value will match the value of cipSecTunHistInOctets. See also cipSecTunInDecompOctWraps for the number of times this counter has wrapped.
OBJECT-TYPE    
  Counter32  

cipSecTunHistHcInDecompOctets 1.3.6.1.4.1.9.9.171.1.4.3.1.1.29
A high capacity count of the total number of decompressed octets received by this IPsec Phase-2 Tunnel. This value is accumulated AFTER the packet is decompressed. If compression is not being used, this value will match the value of cipSecTunHistHcInOctets.
OBJECT-TYPE    
  Counter64  

cipSecTunHistInDecompOctWraps 1.3.6.1.4.1.9.9.171.1.4.3.1.1.30
The number of times the decompressed octets received counter (cipSecTunInDecompOctets) has wrapped.
OBJECT-TYPE    
  Counter32  

cipSecTunHistInPkts 1.3.6.1.4.1.9.9.171.1.4.3.1.1.31
The total number of packets received by this IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  Counter32  

cipSecTunHistInDropPkts 1.3.6.1.4.1.9.9.171.1.4.3.1.1.32
The total number of packets dropped during receive processing by this IPsec Phase-2 Tunnel. This count does NOT include packets dropped due to Anti-Replay processing.
OBJECT-TYPE    
  Counter32  

cipSecTunHistInReplayDropPkts 1.3.6.1.4.1.9.9.171.1.4.3.1.1.33
The total number of packets dropped during receive processing due to Anti-Replay processing by this IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  Counter32  

cipSecTunHistInAuths 1.3.6.1.4.1.9.9.171.1.4.3.1.1.34
The total number of inbound authentication's performed by this IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  Counter32  

cipSecTunHistInAuthFails 1.3.6.1.4.1.9.9.171.1.4.3.1.1.35
The total number of inbound authentication's which ended in failure by this IPsec Phase-2 Tunnel .
OBJECT-TYPE    
  Counter32  

cipSecTunHistInDecrypts 1.3.6.1.4.1.9.9.171.1.4.3.1.1.36
The total number of inbound decryption's performed by this IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  Counter32  

cipSecTunHistInDecryptFails 1.3.6.1.4.1.9.9.171.1.4.3.1.1.37
The total number of inbound decryption's which ended in failure by this IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  Counter32  

cipSecTunHistOutOctets 1.3.6.1.4.1.9.9.171.1.4.3.1.1.38
The total number of octets sent by this IPsec Phase-2 Tunnel. This value is accumulated AFTER determining whether or not the packet should be compressed. See also cipSecTunOutOctWraps for the number of times this counter has wrapped.
OBJECT-TYPE    
  Counter32  

cipSecTunHistHcOutOctets 1.3.6.1.4.1.9.9.171.1.4.3.1.1.39
A high capacity count of the total number of octets sent by this IPsec Phase-2 Tunnel. This value is accumulated AFTER determining whether or not the packet should be compressed.
OBJECT-TYPE    
  Counter64  

cipSecTunHistOutOctWraps 1.3.6.1.4.1.9.9.171.1.4.3.1.1.40
The number of times the octets sent counter (cipSecTunOutOctets) has wrapped.
OBJECT-TYPE    
  Counter32  

cipSecTunHistOutUncompOctets 1.3.6.1.4.1.9.9.171.1.4.3.1.1.41
The total number of uncompressed octets sent by this IPsec Phase-2 Tunnel. This value is accumulated BEFORE the packet is compressed. If compression is not being used, this value will match the value of cipSecTunHistOutOctets. See also cipSecTunOutDecompOctWraps for the number of times this counter has wrapped.
OBJECT-TYPE    
  Counter32  

cipSecTunHistHcOutUncompOctets 1.3.6.1.4.1.9.9.171.1.4.3.1.1.42
A high capacity count of the total number of uncompressed octets sent by this IPsec Phase-2 Tunnel. This value is accumulated BEFORE the packet is compressed. If compression is not being used, this value will match the value of cipSecTunHistHcOutOctets.
OBJECT-TYPE    
  Counter64  

cipSecTunHistOutUncompOctWraps 1.3.6.1.4.1.9.9.171.1.4.3.1.1.43
The number of times the uncompressed octets sent counter (cipSecTunOutUncompOctets) has wrapped.
OBJECT-TYPE    
  Counter32  

cipSecTunHistOutPkts 1.3.6.1.4.1.9.9.171.1.4.3.1.1.44
The total number of packets sent by this IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  Counter32  

cipSecTunHistOutDropPkts 1.3.6.1.4.1.9.9.171.1.4.3.1.1.45
The total number of packets dropped during send processing by this IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  Counter32  

cipSecTunHistOutAuths 1.3.6.1.4.1.9.9.171.1.4.3.1.1.46
The total number of outbound authentication's performed by this IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  Counter32  

cipSecTunHistOutAuthFails 1.3.6.1.4.1.9.9.171.1.4.3.1.1.47
The total number of outbound authentication's which ended in failure by this IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  Counter32  

cipSecTunHistOutEncrypts 1.3.6.1.4.1.9.9.171.1.4.3.1.1.48
The total number of outbound encryption's performed by this IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  Counter32  

cipSecTunHistOutEncryptFails 1.3.6.1.4.1.9.9.171.1.4.3.1.1.49
The total number of outbound encryption's which ended in failure by this IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  Counter32  

cipSecEndPtHistTable 1.3.6.1.4.1.9.9.171.1.4.3.2
The IPsec Phase-2 Tunnel Endpoint History Table. This table is implemented as a sliding window in which only the last n entries are maintained. The maximum number of entries is specified by the cipSecHistTableSize object.
OBJECT-TYPE    
  SEQUENCE OF  
    CipSecEndPtHistEntry

cipSecEndPtHistEntry 1.3.6.1.4.1.9.9.171.1.4.3.2.1
Each entry contains the attributes associated with a previously active IPsec Phase-2 Tunnel Endpoint.
OBJECT-TYPE    
  CipSecEndPtHistEntry  

cipSecEndPtHistIndex 1.3.6.1.4.1.9.9.171.1.4.3.2.1.1
The number of the previously active Endpoint associated with a IPsec Phase-2 Tunnel Table. The value of this index is a number which begins at one and is incremented with each Endpoint associated with an IPsec Phase-2 Tunnel. The value of this object will wrap at 2,147,483,647.
OBJECT-TYPE    
  Integer32 1..2147483647  

cipSecEndPtHistTunIndex 1.3.6.1.4.1.9.9.171.1.4.3.2.1.2
The index of the previously active IPsec Phase-2 Tunnel Table.
OBJECT-TYPE    
  Integer32 1..2147483647  

cipSecEndPtHistActiveIndex 1.3.6.1.4.1.9.9.171.1.4.3.2.1.3
The index of the previously active Endpoint.
OBJECT-TYPE    
  Integer32 1..2147483647  

cipSecEndPtHistLocalName 1.3.6.1.4.1.9.9.171.1.4.3.2.1.4
The DNS name of the local Endpoint.
OBJECT-TYPE    
  DisplayString  

cipSecEndPtHistLocalType 1.3.6.1.4.1.9.9.171.1.4.3.2.1.5
The type of identity for the local Endpoint. Possible values are: 1) a single IP address, or 2) an IP address range, or 3) an IP subnet.
OBJECT-TYPE    
  EndPtType  

cipSecEndPtHistLocalAddr1 1.3.6.1.4.1.9.9.171.1.4.3.2.1.6
The local Endpoint's first IP address specification. If the local Endpoint type is single IP address, then this is the value of the IP address. If the local Endpoint type is IP subnet, then this is the value of the subnet. If the local Endpoint type is IP address range, then this is the value of beginning IP address of the range.
OBJECT-TYPE    
  IPSIpAddress  

cipSecEndPtHistLocalAddr2 1.3.6.1.4.1.9.9.171.1.4.3.2.1.7
The local Endpoint's second IP address specification. If the local Endpoint type is single IP address, then this is the value of the IP address. If the local Endpoint type is IP subnet, then this is the value of the subnet mask. If the local Endpoint type is IP address range, then this is the value of ending IP address of the range.
OBJECT-TYPE    
  IPSIpAddress  

cipSecEndPtHistLocalProtocol 1.3.6.1.4.1.9.9.171.1.4.3.2.1.8
The protocol number of the local Endpoint's traffic.
OBJECT-TYPE    
  Integer32 0..255  

cipSecEndPtHistLocalPort 1.3.6.1.4.1.9.9.171.1.4.3.2.1.9
The port number of the local Endpoint's traffic.
OBJECT-TYPE    
  Integer32 0..65535  

cipSecEndPtHistRemoteName 1.3.6.1.4.1.9.9.171.1.4.3.2.1.10
The DNS name of the remote Endpoint.
OBJECT-TYPE    
  DisplayString  

cipSecEndPtHistRemoteType 1.3.6.1.4.1.9.9.171.1.4.3.2.1.11
The type of identity for the remote Endpoint. Possible values are: 1) a single IP address, or 2) an IP address range, or 3) an IP subnet.
OBJECT-TYPE    
  EndPtType  

cipSecEndPtHistRemoteAddr1 1.3.6.1.4.1.9.9.171.1.4.3.2.1.12
The remote Endpoint's first IP address specification. If the remote Endpoint type is single IP address, then this is the value of the IP address. If the remote Endpoint type is IP subnet, then this is the value of the subnet. If the remote Endpoint type is IP address range, then this is the value of beginning IP address of the range.
OBJECT-TYPE    
  IPSIpAddress  

cipSecEndPtHistRemoteAddr2 1.3.6.1.4.1.9.9.171.1.4.3.2.1.13
The remote Endpoint's second IP address specification. If the remote Endpoint type is single IP address, then this is the value of the IP address. If the remote Endpoint type is IP subnet, then this is the value of the subnet mask. If the remote Endpoint type is IP address range, then this is the value of ending IP address of the range.
OBJECT-TYPE    
  IPSIpAddress  

cipSecEndPtHistRemoteProtocol 1.3.6.1.4.1.9.9.171.1.4.3.2.1.14
The protocol number of the remote Endpoint's traffic.
OBJECT-TYPE    
  Integer32 0..255  

cipSecEndPtHistRemotePort 1.3.6.1.4.1.9.9.171.1.4.3.2.1.15
The port number of the remote Endpoint's traffic.
OBJECT-TYPE    
  Integer32 0..65535  

cipSecFailures 1.3.6.1.4.1.9.9.171.1.5
OBJECT IDENTIFIER    

cipSecFailGlobal 1.3.6.1.4.1.9.9.171.1.5.1
OBJECT IDENTIFIER    

cipSecFailGlobalCntl 1.3.6.1.4.1.9.9.171.1.5.1.1
OBJECT IDENTIFIER    

cipSecFailTableSize 1.3.6.1.4.1.9.9.171.1.5.1.1.1
The window size of the IPsec Phase-1 and Phase-2 Failure Tables. The IPsec Phase-1 and Phase-2 Failure Tables are implemented as a sliding window in which only the last n entries are maintained. This object is used specify the number of entries which will be maintained in the IPsec Phase-1 and Phase-2 Failure Tables. An implementation may choose suitable minimum and maximum values for this element based on the local policy and available resources. If an SNMP SET request specifies a value outside this window for this element, a BAD VALUE may be returned.
OBJECT-TYPE    
  Integer32 1..2147483647  

cipSecFailPhaseOne 1.3.6.1.4.1.9.9.171.1.5.2
OBJECT IDENTIFIER    

cikeFailTable 1.3.6.1.4.1.9.9.171.1.5.2.1
The IPsec Phase-1 Failure Table. This table is implemented as a sliding window in which only the last n entries are maintained. The maximum number of entries is specified by the cipSecFailTableSize object.
OBJECT-TYPE    
  SEQUENCE OF  
    CikeFailEntry

cikeFailEntry 1.3.6.1.4.1.9.9.171.1.5.2.1.1
Each entry contains the attributes associated with an IPsec Phase-1 failure.
OBJECT-TYPE    
  CikeFailEntry  

cikeFailIndex 1.3.6.1.4.1.9.9.171.1.5.2.1.1.1
The IPsec Phase-1 Failure Table index. The value of the index is a number which begins at one and is incremented with each IPsec Phase-1 failure. The value of this object will wrap at 2,147,483,647.
OBJECT-TYPE    
  Integer32 1..2147483647  

cikeFailReason 1.3.6.1.4.1.9.9.171.1.5.2.1.1.2
The reason for the failure. Possible reasons include: 1 = other 2 = peer delete request was received 3 = contact with peer was lost 4 = local failure occurred 5 = authentication failure 6 = hash validation failure 7 = encryption failure 8 = internal error occurred 9 = system capacity failure 10 = proposal failure 11 = peer's certificate is unavailable 12 = peer's certificate was found invalid 13 = local certificate expired 14 = certificate revoke list (crl) failure 15 = peer encoding error 16 = non-existent security association 17 = operator requested termination.
OBJECT-TYPE    
  INTEGER other(1), peerDelRequest(2), peerLost(3), localFailure(4), authFailure(5), hashValidation(6), encryptFailure(7), internalError(8), sysCapExceeded(9), proposalFailure(10), peerCertUnavailable(11), peerCertNotValid(12), localCertExpired(13), crlFailure(14), peerEncodingError(15), nonExistentSa(16), operRequest(17)  

cikeFailTime 1.3.6.1.4.1.9.9.171.1.5.2.1.1.3
The value of sysUpTime in hundredths of seconds at the time of the failure.
OBJECT-TYPE    
  TimeStamp  

cikeFailLocalType 1.3.6.1.4.1.9.9.171.1.5.2.1.1.4
The type of local peer identity. The local peer may be identified by: 1. an IP address, or 2. a host name.
OBJECT-TYPE    
  IkePeerType  

cikeFailLocalValue 1.3.6.1.4.1.9.9.171.1.5.2.1.1.5
The value of the local peer identity. If the local peer type is an IP Address, then this is the IP Address used to identify the local peer. If the local peer type is a host name, then this is the host name used to identify the local peer.
OBJECT-TYPE    
  DisplayString  

cikeFailRemoteType 1.3.6.1.4.1.9.9.171.1.5.2.1.1.6
The type of remote peer identity. The remote peer may be identified by: 1. an IP address, or 2. a host name.
OBJECT-TYPE    
  IkePeerType  

cikeFailRemoteValue 1.3.6.1.4.1.9.9.171.1.5.2.1.1.7
The value of the remote peer identity. If the remote peer type is an IP Address, then this is the IP Address used to identify the remote peer. If the remote peer type is a host name, then this is the host name used to identify the remote peer.
OBJECT-TYPE    
  DisplayString  

cikeFailLocalAddr 1.3.6.1.4.1.9.9.171.1.5.2.1.1.8
The IP address of the local peer.
OBJECT-TYPE    
  IPSIpAddress  

cikeFailRemoteAddr 1.3.6.1.4.1.9.9.171.1.5.2.1.1.9
The IP address of the remote peer.
OBJECT-TYPE    
  IPSIpAddress  

cipSecFailPhaseTwo 1.3.6.1.4.1.9.9.171.1.5.3
OBJECT IDENTIFIER    

cipSecFailTable 1.3.6.1.4.1.9.9.171.1.5.3.1
The IPsec Phase-2 Failure Table. This table is implemented as a sliding window in which only the last n entries are maintained. The maximum number of entries is specified by the cipSecFailTableSize object.
OBJECT-TYPE    
  SEQUENCE OF  
    CipSecFailEntry

cipSecFailEntry 1.3.6.1.4.1.9.9.171.1.5.3.1.1
Each entry contains the attributes associated with an IPsec Phase-1 failure.
OBJECT-TYPE    
  CipSecFailEntry  

cipSecFailIndex 1.3.6.1.4.1.9.9.171.1.5.3.1.1.1
The IPsec Phase-2 Failure Table index. The value of the index is a number which begins at one and is incremented with each IPsec Phase-1 failure. The value of this object will wrap at 2,147,483,647.
OBJECT-TYPE    
  Integer32 1..2147483647  

cipSecFailReason 1.3.6.1.4.1.9.9.171.1.5.3.1.1.2
The reason for the failure. Possible reasons include: 1 = other 2 = internal error occurred 3 = peer encoding error 4 = proposal failure 5 = protocol use failure 6 = non-existent security association 7 = decryption failure 8 = encryption failure 9 = inbound authentication failure 10 = outbound authentication failure 11 = compression failure 12 = system capacity failure 13 = peer delete request was received 14 = contact with peer was lost 15 = sequence number rolled over 16 = operator requested termination.
OBJECT-TYPE    
  INTEGER other(1), internalError(2), peerEncodingError(3), proposalFailure(4), protocolUseFail(5), nonExistentSa(6), decryptFailure(7), encryptFailure(8), inAuthFailure(9), outAuthFailure(10), compression(11), sysCapExceeded(12), peerDelRequest(13), peerLost(14), seqNumRollOver(15), operRequest(16)  

cipSecFailTime 1.3.6.1.4.1.9.9.171.1.5.3.1.1.3
The value of sysUpTime in hundredths of seconds at the time of the failure.
OBJECT-TYPE    
  TimeStamp  

cipSecFailTunnelIndex 1.3.6.1.4.1.9.9.171.1.5.3.1.1.4
The Phase-2 Tunnel index (cipSecTunIndex).
OBJECT-TYPE    
  Integer32 1..2147483647  

cipSecFailSaSpi 1.3.6.1.4.1.9.9.171.1.5.3.1.1.5
The security association SPI value.
OBJECT-TYPE    
  Integer32 0..2147483647  

cipSecFailPktSrcAddr 1.3.6.1.4.1.9.9.171.1.5.3.1.1.6
The packet's source IP address.
OBJECT-TYPE    
  IPSIpAddress  

cipSecFailPktDstAddr 1.3.6.1.4.1.9.9.171.1.5.3.1.1.7
The packet's destination IP address.
OBJECT-TYPE    
  IPSIpAddress  

cipSecTrapCntl 1.3.6.1.4.1.9.9.171.1.6
OBJECT IDENTIFIER    

cipSecTrapCntlIkeTunnelStart 1.3.6.1.4.1.9.9.171.1.6.1
This object defines the administrative state of sending the IPsec IKE Phase-1 Tunnel Start TRAP
OBJECT-TYPE    
  TrapStatus  

cipSecTrapCntlIkeTunnelStop 1.3.6.1.4.1.9.9.171.1.6.2
This object defines the administrative state of sending the IPsec IKE Phase-1 Tunnel Stop TRAP
OBJECT-TYPE    
  TrapStatus  

cipSecTrapCntlIkeSysFailure 1.3.6.1.4.1.9.9.171.1.6.3
This object defines the administrative state of sending the IPsec IKE Phase-1 System Failure TRAP
OBJECT-TYPE    
  TrapStatus  

cipSecTrapCntlIkeCertCrlFailure 1.3.6.1.4.1.9.9.171.1.6.4
This object defines the administrative state of sending the IPsec IKE Phase-1 Certificate/CRL Failure TRAP
OBJECT-TYPE    
  TrapStatus  

cipSecTrapCntlIkeProtocolFail 1.3.6.1.4.1.9.9.171.1.6.5
This object defines the administrative state of sending the IPsec IKE Phase-1 Protocol Failure TRAP
OBJECT-TYPE    
  TrapStatus  

cipSecTrapCntlIkeNoSa 1.3.6.1.4.1.9.9.171.1.6.6
This object defines the administrative state of sending the IPsec IKE Phase-1 No Security Association TRAP
OBJECT-TYPE    
  TrapStatus  

cipSecTrapCntlIpSecTunnelStart 1.3.6.1.4.1.9.9.171.1.6.7
This object defines the administrative state of sending the IPsec Phase-2 Tunnel Start TRAP
OBJECT-TYPE    
  TrapStatus  

cipSecTrapCntlIpSecTunnelStop 1.3.6.1.4.1.9.9.171.1.6.8
This object defines the administrative state of sending the IPsec Phase-2 Tunnel Stop TRAP
OBJECT-TYPE    
  TrapStatus  

cipSecTrapCntlIpSecSysFailure 1.3.6.1.4.1.9.9.171.1.6.9
This object defines the administrative state of sending the IPsec Phase-2 System Failure TRAP
OBJECT-TYPE    
  TrapStatus  

cipSecTrapCntlIpSecSetUpFailure 1.3.6.1.4.1.9.9.171.1.6.10
This object defines the administrative state of sending the IPsec Phase-2 Set Up Failure TRAP
OBJECT-TYPE    
  TrapStatus  

cipSecTrapCntlIpSecEarlyTunTerm 1.3.6.1.4.1.9.9.171.1.6.11
This object defines the administrative state of sending the IPsec Phase-2 Early Tunnel Termination TRAP
OBJECT-TYPE    
  TrapStatus  

cipSecTrapCntlIpSecProtocolFail 1.3.6.1.4.1.9.9.171.1.6.12
This object defines the administrative state of sending the IPsec Phase-2 Protocol Failure TRAP
OBJECT-TYPE    
  TrapStatus  

cipSecTrapCntlIpSecNoSa 1.3.6.1.4.1.9.9.171.1.6.13
This object defines the administrative state of sending the IPsec Phase-2 No Security Association TRAP
OBJECT-TYPE    
  TrapStatus  

cipSecMIBNotificationPrefix 1.3.6.1.4.1.9.9.171.2
OBJECT IDENTIFIER    

cipSecMIBNotifications 1.3.6.1.4.1.9.9.171.2.0
OBJECT IDENTIFIER    

cikeTunnelStart 1.3.6.1.4.1.9.9.171.2.0.1
This notification is generated when an IPsec Phase-1 IKE Tunnel becomes active.
NOTIFICATION-TYPE    
  cikePeerLocalAddr  
  cikePeerRemoteAddr  
  cikeTunLifeTime  

cikeTunnelStop 1.3.6.1.4.1.9.9.171.2.0.2
This notification is generated when an IPsec Phase-1 IKE Tunnel becomes inactive.
NOTIFICATION-TYPE    
  cikePeerLocalAddr  
  cikePeerRemoteAddr  
  cikeTunActiveTime  

cikeSysFailure 1.3.6.1.4.1.9.9.171.2.0.3
This notification is generated when the processing for an IPsec Phase-1 IKE Tunnel experiences an internal or system capacity error.
NOTIFICATION-TYPE    
  cikePeerLocalAddr  
  cikePeerRemoteAddr  

cikeCertCrlFailure 1.3.6.1.4.1.9.9.171.2.0.4
This notification is generated when the processing for an IPsec Phase-1 IKE Tunnel experiences a Certificate or a Certificate Revoke List (CRL) related error.
NOTIFICATION-TYPE    
  cikePeerLocalAddr  
  cikePeerRemoteAddr  

cikeProtocolFailure 1.3.6.1.4.1.9.9.171.2.0.5
This notification is generated when the processing for an IPsec Phase-1 IKE Tunnel experiences a protocol related error.
NOTIFICATION-TYPE    
  cikePeerLocalAddr  
  cikePeerRemoteAddr  

cikeNoSa 1.3.6.1.4.1.9.9.171.2.0.6
This notification is generated when the processing for an IPsec Phase-1 IKE Tunnel experiences a non-existent security association error.
NOTIFICATION-TYPE    
  cikePeerLocalAddr  
  cikePeerRemoteAddr  

cipSecTunnelStart 1.3.6.1.4.1.9.9.171.2.0.7
This notification is generated when an IPsec Phase-2 Tunnel becomes active.
NOTIFICATION-TYPE    
  cipSecTunLifeTime  
  cipSecTunLifeSize  

cipSecTunnelStop 1.3.6.1.4.1.9.9.171.2.0.8
This notification is generated when an IPsec Phase-2 Tunnel becomes inactive.
NOTIFICATION-TYPE    
  cipSecTunActiveTime  

cipSecSysFailure 1.3.6.1.4.1.9.9.171.2.0.9
This notification is generated when the processing for an IPsec Phase-2 Tunnel experiences an internal or system capacity error.
NOTIFICATION-TYPE    
  cikePeerLocalAddr  
  cikePeerRemoteAddr  
  cipSecTunActiveTime  
  cipSecSpiProtocol  

cipSecSetUpFailure 1.3.6.1.4.1.9.9.171.2.0.10
This notification is generated when the setup for an IPsec Phase-2 Tunnel fails.
NOTIFICATION-TYPE    
  cikePeerLocalAddr  
  cikePeerRemoteAddr  

cipSecEarlyTunTerm 1.3.6.1.4.1.9.9.171.2.0.11
This notification is generated when an an IPsec Phase-2 Tunnel is terminated earily or before expected.
NOTIFICATION-TYPE    
  cipSecTunActiveTime  
  cipSecSpiProtocol  

cipSecProtocolFailure 1.3.6.1.4.1.9.9.171.2.0.12
This notification is generated when the processing for an IPsec Phase-2 Tunnel experiences a protocol related error.
NOTIFICATION-TYPE    
  cipSecTunActiveTime  
  cipSecSpiProtocol  

cipSecNoSa 1.3.6.1.4.1.9.9.171.2.0.13
This notification is generated when the processing for an IPsec Phase-2 Tunnel experiences a non-existent security association error.
NOTIFICATION-TYPE    

cipSecMIBConformance 1.3.6.1.4.1.9.9.171.3
OBJECT IDENTIFIER    

cipSecMIBGroups 1.3.6.1.4.1.9.9.171.3.1
OBJECT IDENTIFIER    

cipSecLevelsGroup 1.3.6.1.4.1.9.9.171.3.1.1
This group consists of a: 1) IPsec MIB Level
OBJECT-GROUP    

cipSecPhaseOneGroup 1.3.6.1.4.1.9.9.171.3.1.2
This group consists of: 1) IPsec Phase-1 Global Objects 2) IPsec Phase-1 Peer Table 3) IPsec Phase-1 Tunnel Table 4) IPsec Phase-1 Correlation Table
OBJECT-GROUP    

cipSecPhaseTwoGroup 1.3.6.1.4.1.9.9.171.3.1.3
This group consists of: 1) IPsec Phase-2 Global Statistics 2) IPsec Phase-2 Tunnel Table 3) IPsec Phase-2 Endpoint Table 4) IPsec Phase-2 Security Protection Index Table
OBJECT-GROUP    

cipSecHistoryGroup 1.3.6.1.4.1.9.9.171.3.1.4
This group consists of: 1) IPsec History Global Objects 2) IPsec Phase-1 History Objects 3) IPsec Phase-2 History Objects
OBJECT-GROUP    

cipSecFailuresGroup 1.3.6.1.4.1.9.9.171.3.1.5
This group consists of: 1) IPsec Failure Global Objects 2) IPsec Phase-1 Tunnel Failure Table 3) IPsec Phase-2 Tunnel Failure Table
OBJECT-GROUP    

cipSecTrapCntlGroup 1.3.6.1.4.1.9.9.171.3.1.6
This group of objects controls the sending of IPsec TRAPs.
OBJECT-GROUP    

cipSecNotificationGroup 1.3.6.1.4.1.9.9.171.3.1.7
This group contains the notifications for the IPsec MIB.
NOTIFICATION-GROUP    

cipSecGWStatsGroup 1.3.6.1.4.1.9.9.171.3.1.8
OBJECT-GROUP    

cipSecMIBCompliances 1.3.6.1.4.1.9.9.171.3.2
OBJECT IDENTIFIER    

cipSecMIBCompliance 1.3.6.1.4.1.9.9.171.3.2.1
The compliance statement for SNMP entities the IP Security Protocol. This has been replaced by cipSecMIBComplianceRev1.
MODULE-COMPLIANCE    

cipSecMIBComplianceRev1 1.3.6.1.4.1.9.9.171.3.2.2
The compliance statement for SNMP entities the IP Security Protocol.
MODULE-COMPLIANCE    

Defined Objects

IPSIpAddress  
An IP V4 or V6 Address.
TEXTUAL-CONVENTION    
  OCTET STRING SIZE(4 | 16)  

IkePeerType  
The type of IPsec Phase-1 IKE peer identity. The IKE peer may be identified by: 1. an IP address, or 2. a host name.
TEXTUAL-CONVENTION    
  INTEGER ipAddrPeer(1), namePeer(2)  

IkeNegoMode  
The IPsec Phase-1 IKE negotiation mode.
TEXTUAL-CONVENTION    
  INTEGER main(1), aggressive(2)  

IkeHashAlgo  
The hash algorithm used in IPsec Phase-1 IKE negotiations.
TEXTUAL-CONVENTION    
  INTEGER none(1), md5(2), sha(3)  

IkeAuthMethod  
The authentication method used in IPsec Phase-1 IKE negotiations.
TEXTUAL-CONVENTION    
  INTEGER none(1), preSharedKey(2), rsaSig(3), rsaEncrypt(4), revPublicKey(5)  

DiffHellmanGrp  
The Diffie Hellman Group used in negotiations.
TEXTUAL-CONVENTION    
  INTEGER none(1), dhGroup1(2), dhGroup2(3)  

KeyType  
The type of key used by an IPsec Phase-2 Tunnel.
TEXTUAL-CONVENTION    
  INTEGER ike(1), manual(2)  

EncapMode  
The encapsulation mode used by an IPsec Phase-2 Tunnel.
TEXTUAL-CONVENTION    
  INTEGER tunnel(1), transport(2)  

EncryptAlgo  
The encryption algorithm used in negotiations.
TEXTUAL-CONVENTION    
  INTEGER none(1), des(2), des3(3)  

AuthAlgo  
The authentication algorithm used by a security association of an IPsec Phase-2 Tunnel.
TEXTUAL-CONVENTION    
  INTEGER none(1), hmacMd5(2), hmacSha(3)  

CompAlgo  
The compression algorithm used by a security association of an IPsec Phase-2 Tunnel.
TEXTUAL-CONVENTION    
  INTEGER none(1), ldf(2)  

EndPtType  
The type of identity use to specify an IPsec End Point.
TEXTUAL-CONVENTION    
  INTEGER singleIpAddr(1), ipAddrRange(2), ipSubnet(3)  

TunnelStatus  
The status of a Tunnel. Objects of this type may be used to bring the tunnel down by setting value of this object to destroy(2). Objects of this type cannot be used to create a Tunnel.
TEXTUAL-CONVENTION    
  INTEGER active(1), destroy(2)  

TrapStatus  
The administrative status for sending a TRAP.
TEXTUAL-CONVENTION    
  INTEGER enabled(1), disabled(2)  

CikePeerEntry  
SEQUENCE    
  IkePeerType as cikePeerLocalType  
  DisplayString as cikePeerLocalValue  
  IkePeerType as cikePeerRemoteType  
  DisplayString as cikePeerRemoteValue  
  Integer32 as cikePeerIntIndex  
  IPSIpAddress as cikePeerLocalAddr  
  IPSIpAddress as cikePeerRemoteAddr  
  TimeInterval as cikePeerActiveTime  
  Integer32 as cikePeerActiveTunnelIndex  

CikeTunnelEntry  
SEQUENCE    
  Integer32 as cikeTunIndex  
  IkePeerType as cikeTunLocalType  
  DisplayString as cikeTunLocalValue  
  IPSIpAddress as cikeTunLocalAddr  
  DisplayString as cikeTunLocalName  
  IkePeerType as cikeTunRemoteType  
  DisplayString as cikeTunRemoteValue  
  IPSIpAddress as cikeTunRemoteAddr  
  DisplayString as cikeTunRemoteName  
  IkeNegoMode as cikeTunNegoMode  
  DiffHellmanGrp as cikeTunDiffHellmanGrp  
  EncryptAlgo as cikeTunEncryptAlgo  
  IkeHashAlgo as cikeTunHashAlgo  
  IkeAuthMethod as cikeTunAuthMethod  
  Integer32 as cikeTunLifeTime  
  TimeInterval as cikeTunActiveTime  
  Integer32 as cikeTunSaRefreshThreshold  
  Counter32 as cikeTunTotalRefreshes  
  Counter32 as cikeTunInOctets  
  Counter32 as cikeTunInPkts  
  Counter32 as cikeTunInDropPkts  
  Counter32 as cikeTunInNotifys  
  Counter32 as cikeTunInP2Exchgs  
  Counter32 as cikeTunInP2ExchgInvalids  
  Counter32 as cikeTunInP2ExchgRejects  
  Counter32 as cikeTunInP2SaDelRequests  
  Counter32 as cikeTunOutOctets  
  Counter32 as cikeTunOutPkts  
  Counter32 as cikeTunOutDropPkts  
  Counter32 as cikeTunOutNotifys  
  Counter32 as cikeTunOutP2Exchgs  
  Counter32 as cikeTunOutP2ExchgInvalids  
  Counter32 as cikeTunOutP2ExchgRejects  
  Counter32 as cikeTunOutP2SaDelRequests  
  TunnelStatus as cikeTunStatus  

CikePeerCorrEntry  
SEQUENCE    
  IkePeerType as cikePeerCorrLocalType  
  DisplayString as cikePeerCorrLocalValue  
  IkePeerType as cikePeerCorrRemoteType  
  DisplayString as cikePeerCorrRemoteValue  
  Integer32 as cikePeerCorrIntIndex  
  Integer32 as cikePeerCorrSeqNum  
  Integer32 as cikePeerCorrIpSecTunIndex  

CikePhase1GWStatsEntry  
SEQUENCE    
  Gauge32 as cikePhase1GWActiveTunnels  
  Counter32 as cikePhase1GWPreviousTunnels  
  Counter32 as cikePhase1GWInOctets  
  Counter32 as cikePhase1GWInPkts  
  Counter32 as cikePhase1GWInDropPkts  
  Counter32 as cikePhase1GWInNotifys  
  Counter32 as cikePhase1GWInP2Exchgs  
  Counter32 as cikePhase1GWInP2ExchgInvalids  
  Counter32 as cikePhase1GWInP2ExchgRejects  
  Counter32 as cikePhase1GWInP2SaDelRequests  
  Counter32 as cikePhase1GWOutOctets  
  Counter32 as cikePhase1GWOutPkts  
  Counter32 as cikePhase1GWOutDropPkts  
  Counter32 as cikePhase1GWOutNotifys  
  Counter32 as cikePhase1GWOutP2Exchgs  
  Counter32 as cikePhase1GWOutP2ExchgInvalids  
  Counter32 as cikePhase1GWOutP2ExchgRejects  
  Counter32 as cikePhase1GWOutP2SaDelRequests  
  Counter32 as cikePhase1GWInitTunnels  
  Counter32 as cikePhase1GWInitTunnelFails  
  Counter32 as cikePhase1GWRespTunnelFails  
  Counter32 as cikePhase1GWSysCapFails  
  Counter32 as cikePhase1GWAuthFails  
  Counter32 as cikePhase1GWDecryptFails  
  Counter32 as cikePhase1GWHashValidFails  
  Counter32 as cikePhase1GWNoSaFails  

CipSecTunnelEntry  
SEQUENCE    
  Integer32 as cipSecTunIndex  
  Integer32 as cipSecTunIkeTunnelIndex  
  TruthValue as cipSecTunIkeTunnelAlive  
  IPSIpAddress as cipSecTunLocalAddr  
  IPSIpAddress as cipSecTunRemoteAddr  
  KeyType as cipSecTunKeyType  
  EncapMode as cipSecTunEncapMode  
  Integer32 as cipSecTunLifeSize  
  Integer32 as cipSecTunLifeTime  
  TimeInterval as cipSecTunActiveTime  
  Integer32 as cipSecTunSaLifeSizeThreshold  
  Integer32 as cipSecTunSaLifeTimeThreshold  
  Counter32 as cipSecTunTotalRefreshes  
  Counter32 as cipSecTunExpiredSaInstances  
  Gauge32 as cipSecTunCurrentSaInstances  
  DiffHellmanGrp as cipSecTunInSaDiffHellmanGrp  
  EncryptAlgo as cipSecTunInSaEncryptAlgo  
  AuthAlgo as cipSecTunInSaAhAuthAlgo  
  AuthAlgo as cipSecTunInSaEspAuthAlgo  
  CompAlgo as cipSecTunInSaDecompAlgo  
  DiffHellmanGrp as cipSecTunOutSaDiffHellmanGrp  
  EncryptAlgo as cipSecTunOutSaEncryptAlgo  
  AuthAlgo as cipSecTunOutSaAhAuthAlgo  
  AuthAlgo as cipSecTunOutSaEspAuthAlgo  
  CompAlgo as cipSecTunOutSaCompAlgo  
  Counter32 as cipSecTunInOctets  
  Counter64 as cipSecTunHcInOctets  
  Counter32 as cipSecTunInOctWraps  
  Counter32 as cipSecTunInDecompOctets  
  Counter64 as cipSecTunHcInDecompOctets  
  Counter32 as cipSecTunInDecompOctWraps  
  Counter32 as cipSecTunInPkts  
  Counter32 as cipSecTunInDropPkts  
  Counter32 as cipSecTunInReplayDropPkts  
  Counter32 as cipSecTunInAuths  
  Counter32 as cipSecTunInAuthFails  
  Counter32 as cipSecTunInDecrypts  
  Counter32 as cipSecTunInDecryptFails  
  Counter32 as cipSecTunOutOctets  
  Counter64 as cipSecTunHcOutOctets  
  Counter32 as cipSecTunOutOctWraps  
  Counter32 as cipSecTunOutUncompOctets  
  Counter64 as cipSecTunHcOutUncompOctets  
  Counter32 as cipSecTunOutUncompOctWraps  
  Counter32 as cipSecTunOutPkts  
  Counter32 as cipSecTunOutDropPkts  
  Counter32 as cipSecTunOutAuths  
  Counter32 as cipSecTunOutAuthFails  
  Counter32 as cipSecTunOutEncrypts  
  Counter32 as cipSecTunOutEncryptFails  
  TunnelStatus as cipSecTunStatus  

CipSecEndPtEntry  
SEQUENCE    
  Integer32 as cipSecEndPtIndex  
  DisplayString as cipSecEndPtLocalName  
  EndPtType as cipSecEndPtLocalType  
  IPSIpAddress as cipSecEndPtLocalAddr1  
  IPSIpAddress as cipSecEndPtLocalAddr2  
  Integer32 as cipSecEndPtLocalProtocol  
  Integer32 as cipSecEndPtLocalPort  
  DisplayString as cipSecEndPtRemoteName  
  EndPtType as cipSecEndPtRemoteType  
  IPSIpAddress as cipSecEndPtRemoteAddr1  
  IPSIpAddress as cipSecEndPtRemoteAddr2  
  Integer32 as cipSecEndPtRemoteProtocol  
  Integer32 as cipSecEndPtRemotePort  

CipSecSpiEntry  
SEQUENCE    
  Integer32 as cipSecSpiIndex  
  INTEGER as cipSecSpiDirection  
  Unsigned32 as cipSecSpiValue  
  INTEGER as cipSecSpiProtocol  
  INTEGER as cipSecSpiStatus  

CipSecPhase2GWStatsEntry  
SEQUENCE    
  Gauge32 as cipSecPhase2GWActiveTunnels  
  Counter32 as cipSecPhase2GWPreviousTunnels  
  Counter32 as cipSecPhase2GWInOctets  
  Counter32 as cipSecPhase2GWInOctWraps  
  Counter32 as cipSecPhase2GWInDecompOctets  
  Counter32 as cipSecPhase2GWInDecompOctWraps  
  Counter32 as cipSecPhase2GWInPkts  
  Counter32 as cipSecPhase2GWInDrops  
  Counter32 as cipSecPhase2GWInReplayDrops  
  Counter32 as cipSecPhase2GWInAuths  
  Counter32 as cipSecPhase2GWInAuthFails  
  Counter32 as cipSecPhase2GWInDecrypts  
  Counter32 as cipSecPhase2GWInDecryptFails  
  Counter32 as cipSecPhase2GWOutOctets  
  Counter32 as cipSecPhase2GWOutOctWraps  
  Counter32 as cipSecPhase2GWOutUncompOctets  
  Counter32 as cipSecPhase2GWOutUncompOctWraps  
  Counter32 as cipSecPhase2GWOutPkts  
  Counter32 as cipSecPhase2GWOutDrops  
  Counter32 as cipSecPhase2GWOutAuths  
  Counter32 as cipSecPhase2GWOutAuthFails  
  Counter32 as cipSecPhase2GWOutEncrypts  
  Counter32 as cipSecPhase2GWOutEncryptFails  
  Counter32 as cipSecPhase2GWProtocolUseFails  
  Counter32 as cipSecPhase2GWNoSaFails  
  Counter32 as cipSecPhase2GWSysCapFails  

CikeTunnelHistEntry  
SEQUENCE    
  Integer32 as cikeTunHistIndex  
  INTEGER as cikeTunHistTermReason  
  Integer32 as cikeTunHistActiveIndex  
  IkePeerType as cikeTunHistPeerLocalType  
  DisplayString as cikeTunHistPeerLocalValue  
  Integer32 as cikeTunHistPeerIntIndex  
  IkePeerType as cikeTunHistPeerRemoteType  
  DisplayString as cikeTunHistPeerRemoteValue  
  IPSIpAddress as cikeTunHistLocalAddr  
  DisplayString as cikeTunHistLocalName  
  IPSIpAddress as cikeTunHistRemoteAddr  
  DisplayString as cikeTunHistRemoteName  
  IkeNegoMode as cikeTunHistNegoMode  
  DiffHellmanGrp as cikeTunHistDiffHellmanGrp  
  EncryptAlgo as cikeTunHistEncryptAlgo  
  IkeHashAlgo as cikeTunHistHashAlgo  
  IkeAuthMethod as cikeTunHistAuthMethod  
  Integer32 as cikeTunHistLifeTime  
  TimeStamp as cikeTunHistStartTime  
  TimeInterval as cikeTunHistActiveTime  
  Counter32 as cikeTunHistTotalRefreshes  
  Counter32 as cikeTunHistTotalSas  
  Counter32 as cikeTunHistInOctets  
  Counter32 as cikeTunHistInPkts  
  Counter32 as cikeTunHistInDropPkts  
  Counter32 as cikeTunHistInNotifys  
  Counter32 as cikeTunHistInP2Exchgs  
  Counter32 as cikeTunHistInP2ExchgInvalids  
  Counter32 as cikeTunHistInP2ExchgRejects  
  Counter32 as cikeTunHistInP2SaDelRequests  
  Counter32 as cikeTunHistOutOctets  
  Counter32 as cikeTunHistOutPkts  
  Counter32 as cikeTunHistOutDropPkts  
  Counter32 as cikeTunHistOutNotifys  
  Counter32 as cikeTunHistOutP2Exchgs  
  Counter32 as cikeTunHistOutP2ExchgInvalids  
  Counter32 as cikeTunHistOutP2ExchgRejects  
  Counter32 as cikeTunHistOutP2SaDelRequests  

CipSecTunnelHistEntry  
SEQUENCE    
  Integer32 as cipSecTunHistIndex  
  INTEGER as cipSecTunHistTermReason  
  Integer32 as cipSecTunHistActiveIndex  
  Integer32 as cipSecTunHistIkeTunnelIndex  
  IPSIpAddress as cipSecTunHistLocalAddr  
  IPSIpAddress as cipSecTunHistRemoteAddr  
  KeyType as cipSecTunHistKeyType  
  EncapMode as cipSecTunHistEncapMode  
  Integer32 as cipSecTunHistLifeSize  
  Integer32 as cipSecTunHistLifeTime  
  TimeStamp as cipSecTunHistStartTime  
  TimeInterval as cipSecTunHistActiveTime  
  Counter32 as cipSecTunHistTotalRefreshes  
  Counter32 as cipSecTunHistTotalSas  
  DiffHellmanGrp as cipSecTunHistInSaDiffHellmanGrp  
  EncryptAlgo as cipSecTunHistInSaEncryptAlgo  
  AuthAlgo as cipSecTunHistInSaAhAuthAlgo  
  AuthAlgo as cipSecTunHistInSaEspAuthAlgo  
  CompAlgo as cipSecTunHistInSaDecompAlgo  
  DiffHellmanGrp as cipSecTunHistOutSaDiffHellmanGrp  
  EncryptAlgo as cipSecTunHistOutSaEncryptAlgo  
  AuthAlgo as cipSecTunHistOutSaAhAuthAlgo  
  AuthAlgo as cipSecTunHistOutSaEspAuthAlgo  
  CompAlgo as cipSecTunHistOutSaCompAlgo  
  Counter32 as cipSecTunHistInOctets  
  Counter64 as cipSecTunHistHcInOctets  
  Counter32 as cipSecTunHistInOctWraps  
  Counter32 as cipSecTunHistInDecompOctets  
  Counter64 as cipSecTunHistHcInDecompOctets  
  Counter32 as cipSecTunHistInDecompOctWraps  
  Counter32 as cipSecTunHistInPkts  
  Counter32 as cipSecTunHistInDropPkts  
  Counter32 as cipSecTunHistInReplayDropPkts  
  Counter32 as cipSecTunHistInAuths  
  Counter32 as cipSecTunHistInAuthFails  
  Counter32 as cipSecTunHistInDecrypts  
  Counter32 as cipSecTunHistInDecryptFails  
  Counter32 as cipSecTunHistOutOctets  
  Counter64 as cipSecTunHistHcOutOctets  
  Counter32 as cipSecTunHistOutOctWraps  
  Counter32 as cipSecTunHistOutUncompOctets  
  Counter64 as cipSecTunHistHcOutUncompOctets  
  Counter32 as cipSecTunHistOutUncompOctWraps  
  Counter32 as cipSecTunHistOutPkts  
  Counter32 as cipSecTunHistOutDropPkts  
  Counter32 as cipSecTunHistOutAuths  
  Counter32 as cipSecTunHistOutAuthFails  
  Counter32 as cipSecTunHistOutEncrypts  
  Counter32 as cipSecTunHistOutEncryptFails  

CipSecEndPtHistEntry  
SEQUENCE    
  Integer32 as cipSecEndPtHistIndex  
  Integer32 as cipSecEndPtHistTunIndex  
  Integer32 as cipSecEndPtHistActiveIndex  
  DisplayString as cipSecEndPtHistLocalName  
  EndPtType as cipSecEndPtHistLocalType  
  IPSIpAddress as cipSecEndPtHistLocalAddr1  
  IPSIpAddress as cipSecEndPtHistLocalAddr2  
  Integer32 as cipSecEndPtHistLocalProtocol  
  Integer32 as cipSecEndPtHistLocalPort  
  DisplayString as cipSecEndPtHistRemoteName  
  EndPtType as cipSecEndPtHistRemoteType  
  IPSIpAddress as cipSecEndPtHistRemoteAddr1  
  IPSIpAddress as cipSecEndPtHistRemoteAddr2  
  Integer32 as cipSecEndPtHistRemoteProtocol  
  Integer32 as cipSecEndPtHistRemotePort  

CikeFailEntry  
SEQUENCE    
  Integer32 as cikeFailIndex  
  INTEGER as cikeFailReason  
  TimeStamp as cikeFailTime  
  IkePeerType as cikeFailLocalType  
  DisplayString as cikeFailLocalValue  
  IkePeerType as cikeFailRemoteType  
  DisplayString as cikeFailRemoteValue  
  IPSIpAddress as cikeFailLocalAddr  
  IPSIpAddress as cikeFailRemoteAddr  

CipSecFailEntry  
SEQUENCE    
  Integer32 as cipSecFailIndex  
  INTEGER as cipSecFailReason  
  TimeStamp as cipSecFailTime  
  Integer32 as cipSecFailTunnelIndex  
  Integer32 as cipSecFailSaSpi  
  IPSIpAddress as cipSecFailPktSrcAddr  
  IPSIpAddress as cipSecFailPktDstAddr