CISCO-IPSLA-ECHO-MIB

File: CISCO-IPSLA-ECHO-MIB.mib (41304 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
SNMP-FRAMEWORK-MIB INET-ADDRESS-MIB CISCO-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Unsigned32
MODULE-COMPLIANCE OBJECT-GROUP StorageType
TruthValue RowStatus SnmpAdminString
InetAddress InetAddressType InetPortNumber
ciscoMgmt

Defined Objects

ciscoIpSlaEchoMIB 1.3.6.1.4.1.9.9.636
This MIB module defines the templates for IP SLA operations of ICMP echo, UDP echo and TCP connect. The ICMP echo operation measures end-to-end response time between a Cisco router and any IP enabled device by computing the time taken between sending an ICMP echo request message to the destination and receiving an ICMP echo reply. The UDP echo operation measures end-to-end response time between a Cisco router and any IP enabled device by computing the time taken between sending an UDP echo request message to the destination and receiving an UDP echo reply. The TCP connect operation measures end-to-end response time between a Cisco router and any IP enabled device by computing the time taken to perform a TCP connect operation.
MODULE-IDENTITY    

ciscoIpSlaEchoMIBNotifs 1.3.6.1.4.1.9.9.636.0
OBJECT IDENTIFIER    

ciscoIpSlaEchoMIBObjects 1.3.6.1.4.1.9.9.636.1
OBJECT IDENTIFIER    

cipslaIcmpEchoTmplTable 1.3.6.1.4.1.9.9.636.1.1
A table that contains ICMP echo template definitions.
OBJECT-TYPE    
  SEQUENCE OF  
    CipslaIcmpEchoTmplEntry

cipslaIcmpEchoTmplEntry 1.3.6.1.4.1.9.9.636.1.1.1
A row entry representing an IPSLA ICMP echo template.
OBJECT-TYPE    
  CipslaIcmpEchoTmplEntry  

cipslaIcmpEchoTmplName 1.3.6.1.4.1.9.9.636.1.1.1.1
This field is used to specify the ICMP echo template name.
OBJECT-TYPE    
  SnmpAdminString SIZE(1..64)  

cipslaIcmpEchoTmplDescription 1.3.6.1.4.1.9.9.636.1.1.1.2
This field is used to provide description for the ICMP echo template.
OBJECT-TYPE    
  SnmpAdminString SIZE(0..128)  

cipslaIcmpEchoTmplSrcAddrType 1.3.6.1.4.1.9.9.636.1.1.1.3
An enumerated value which specifies the IP address type of the source. It must be used along with the cipslaIcmpEchoTmplSrcAddr object.
OBJECT-TYPE    
  InetAddressType  

cipslaIcmpEchoTmplSrcAddr 1.3.6.1.4.1.9.9.636.1.1.1.4
A string which specifies the IP address of the source.
OBJECT-TYPE    
  InetAddress  

cipslaIcmpEchoTmplTimeOut 1.3.6.1.4.1.9.9.636.1.1.1.5
Specifies the duration to wait for a IP SLA operation completion. For connection oriented protocols, this may cause the connection to be closed by the operation. Once closed, it will be assumed that the connection reestablishment will be performed. To prevent unwanted closure of connections, be sure to set this value to a realistic connection timeout.
OBJECT-TYPE    
  Unsigned32 0..604800000  

cipslaIcmpEchoTmplVerifyData 1.3.6.1.4.1.9.9.636.1.1.1.6
When set to true, the resulting data in each IP SLA operation is compared with the expected data. This includes checking header information (if possible) and exact packet size.
OBJECT-TYPE    
  TruthValue  

cipslaIcmpEchoTmplReqDataSize 1.3.6.1.4.1.9.9.636.1.1.1.7
This object represents the number of octets to be placed into the ARR Data portion of the request message, when using SNA protocols. For non-ARR protocols' IP SLA request/responses, this value represents the native payload size. REMEMBER: The ARR Header overhead is not included in this value.
OBJECT-TYPE    
  Unsigned32 0..16384  

cipslaIcmpEchoTmplTOS 1.3.6.1.4.1.9.9.636.1.1.1.8
This object represents the type of service octet in an IP header.
OBJECT-TYPE    
  Unsigned32 0..255  

cipslaIcmpEchoTmplVrfName 1.3.6.1.4.1.9.9.636.1.1.1.9
This field is used to specify the VRF name with which the IP SLA operation will be used. For regular IP SLA operation this field should not be configured. The agent will use this field to identify the VRF routing table for this operation.
OBJECT-TYPE    
  SnmpAdminString SIZE(0..32)  

cipslaIcmpEchoTmplThreshold 1.3.6.1.4.1.9.9.636.1.1.1.10
This object defines an administrative threshold limit. If the IP SLA operation time exceeds this limit and if the condition specified in cipslaIcmpEchoTmplHistFilter is satisfied, one threshold crossing occurrence will be counted.
OBJECT-TYPE    
  Unsigned32 0..2147483647  

cipslaIcmpEchoTmplHistLives 1.3.6.1.4.1.9.9.636.1.1.1.11
The maximum number of history lives to record. A life is defined by the countdown (or transition) to zero by the cipslaAutoGroupScheduleLife object. A new life is created when the same conceptual control row is restarted via the transition of the cipslaAutoGroupScheduleLife object and its subsequent countdown. The value of zero will shut off all data collection.
OBJECT-TYPE    
  Unsigned32 0..2  

cipslaIcmpEchoTmplHistBuckets 1.3.6.1.4.1.9.9.636.1.1.1.12
The maximum number of history buckets to record. This value is set to the number of operations to keep per lifetime. After cipslaIcmpEchoTmplHistBuckets are filled, the oldest entries are deleted and the most recent cipslaIcmpEchoTmplHistBuckets buckets are retained.
OBJECT-TYPE    
  Unsigned32 1..60  

cipslaIcmpEchoTmplHistFilter 1.3.6.1.4.1.9.9.636.1.1.1.13
Defines a filter for adding RTT results to the history buffer: none(1) - no history is recorded all(2) - the results of all completion times and failed completions are recorded overThreshold(3) - the results of completion times over cipslaIcmpEchoTmplThreshold are recorded. failures(4) - the results of failed operations (only) are recorded.
OBJECT-TYPE    
  INTEGER none(1), all(2), overThreshold(3), failures(4)  

cipslaIcmpEchoTmplStatsHours 1.3.6.1.4.1.9.9.636.1.1.1.14
The maximum number of hours for which statistics are maintained. Specifically this is the number of hourly groups to keep before rolling over. The value of one is not advisable because the hourly group will close and immediately be deleted before the network management station will have the opportunity to retrieve the statistics. The value of zero will shut off data collection.
OBJECT-TYPE    
  Unsigned32 0..25  

cipslaIcmpEchoTmplDistBuckets 1.3.6.1.4.1.9.9.636.1.1.1.15
The maximum number of statistical distribution buckets to accumulate. Since this index does not rollover, only the first cipslaIcmpEchoTmplStatsNumDistBuckets will be kept. The last cipslaIcmpEchoTmplStatsNumDistBucket will contain all entries from its distribution interval start point to infinity.
OBJECT-TYPE    
  Unsigned32 1..20  

cipslaIcmpEchoTmplDistInterval 1.3.6.1.4.1.9.9.636.1.1.1.16
The statistical distribution buckets interval. Distribution Bucket Example: cipslaIcmpEchoTmplDistBuckets = 5 buckets cipslaIcmpEchoTmplDistInterval = 10 milliseconds | Bucket 1 | Bucket 2 | Bucket 3 | Bucket 4 | Bucket 5 | | 0-9 ms | 10-19 ms | 20-29 ms | 30-39 ms | 40-Inf ms | Odd Example: cipslaIcmpEchoTmplDistBuckets = 1 buckets cipslaIcmpEchoTmplDistInterval = 10 milliseconds | Bucket 1 | | 0-Inf ms | Thus, this odd example shows that the value of cipslaIcmpEchoTmplDistInterval does not apply when cipslaIcmpEchoTmplDistBuckets is one.
OBJECT-TYPE    
  Unsigned32 1..100  

cipslaIcmpEchoTmplStorageType 1.3.6.1.4.1.9.9.636.1.1.1.17
The storage type of this conceptual row.
OBJECT-TYPE    
  StorageType  

cipslaIcmpEchoTmplRowStatus 1.3.6.1.4.1.9.9.636.1.1.1.18
The status of the conceptual ICMP echo template control row. When the status is active, all the read-create objects in that row can be modified.
OBJECT-TYPE    
  RowStatus  

cipslaUdpEchoTmplTable 1.3.6.1.4.1.9.9.636.1.2
A table that contains UDP echo template specific definitions.
OBJECT-TYPE    
  SEQUENCE OF  
    CipslaUdpEchoTmplEntry

cipslaUdpEchoTmplEntry 1.3.6.1.4.1.9.9.636.1.2.1
A row entry representing an IPSLA UDP echo template.
OBJECT-TYPE    
  CipslaUdpEchoTmplEntry  

cipslaUdpEchoTmplName 1.3.6.1.4.1.9.9.636.1.2.1.1
A string which specifies the UDP echo template name.
OBJECT-TYPE    
  SnmpAdminString SIZE(1..64)  

cipslaUdpEchoTmplDescription 1.3.6.1.4.1.9.9.636.1.2.1.2
A string which provides description to the UDP echo template.
OBJECT-TYPE    
  SnmpAdminString SIZE(0..128)  

cipslaUdpEchoTmplControlEnable 1.3.6.1.4.1.9.9.636.1.2.1.3
If this object is enabled, then the IP SLA application will send control messages to a responder, residing on the target router to respond to the data request packets being sent by the source router.
OBJECT-TYPE    
  TruthValue  

cipslaUdpEchoTmplSrcAddrType 1.3.6.1.4.1.9.9.636.1.2.1.4
An enumerated value which specifies the IP address type of the source. It must be used along with the cipslaUdpEchoTmplSrcAddr object.
OBJECT-TYPE    
  InetAddressType  

cipslaUdpEchoTmplSrcAddr 1.3.6.1.4.1.9.9.636.1.2.1.5
A string which specifies the IP address of the source.
OBJECT-TYPE    
  InetAddress  

cipslaUdpEchoTmplSrcPort 1.3.6.1.4.1.9.9.636.1.2.1.6
This object represents the source's port number. If this object is not specified, the application will get a port allocated by the system.
OBJECT-TYPE    
  InetPortNumber  

cipslaUdpEchoTmplTimeOut 1.3.6.1.4.1.9.9.636.1.2.1.7
Specifies the duration to wait for an IP SLA operation completion. For connection oriented protocols, this may cause the connection to be closed by the operation. Once closed, it will be assumed that the connection reestablishment will be performed. To prevent unwanted closure of connections, be sure to set this value to a realistic connection timeout.
OBJECT-TYPE    
  Unsigned32 0..604800000  

cipslaUdpEchoTmplVerifyData 1.3.6.1.4.1.9.9.636.1.2.1.8
When set to true, the resulting data in each IP SLA operation is compared with the expected data. This includes checking header information (if possible) and exact packet size.
OBJECT-TYPE    
  TruthValue  

cipslaUdpEchoTmplReqDataSize 1.3.6.1.4.1.9.9.636.1.2.1.9
This object represents the number of octets to be placed into the ARR Data portion of the request message, when using SNA protocols. For non-ARR protocols' RTT request/responses, this value represents the native payload size. REMEMBER: The ARR Header overhead is not included in this value.
OBJECT-TYPE    
  Unsigned32 4..1500  

cipslaUdpEchoTmplTOS 1.3.6.1.4.1.9.9.636.1.2.1.10
This object represents the type of service octet in an IP header.
OBJECT-TYPE    
  Unsigned32 0..255  

cipslaUdpEchoTmplVrfName 1.3.6.1.4.1.9.9.636.1.2.1.11
This field is used to specify the VRF name with which the IP SLA operation will be used. For regular IP SLA operation this field should not be configured. The agent will use this field to identify the VRF routing Table for this operation.
OBJECT-TYPE    
  SnmpAdminString SIZE(0..32)  

cipslaUdpEchoTmplThreshold 1.3.6.1.4.1.9.9.636.1.2.1.12
This object defines an administrative threshold limit. If the IP SLA operation time exceeds this limit and if the condition specified in cipslaUdpEchoTmplHistFilter is satisfied, one threshold crossing occurrence will be counted.
OBJECT-TYPE    
  Unsigned32 0..2147483647  

cipslaUdpEchoTmplHistLives 1.3.6.1.4.1.9.9.636.1.2.1.13
The maximum number of history lives to record. A life is defined by the countdown (or transition) to zero by the cipslaAutoGroupScheduleLife object. A new life is created when the same conceptual control row is restarted via the transition of the cipslaAutoGroupScheduleLife object and its subsequent countdown. The value of zero will shut off all data collection.
OBJECT-TYPE    
  Unsigned32 0..2  

cipslaUdpEchoTmplHistBuckets 1.3.6.1.4.1.9.9.636.1.2.1.14
The maximum number of history buckets to record. This value should be set to the number of operations to keep per lifetime. After cipslaUdpEchoTmplHistBuckets are filled, the oldest entries are deleted and the most recent cipslaUdpEchoTmplHistBuckets buckets are retained.
OBJECT-TYPE    
  Unsigned32 1..60  

cipslaUdpEchoTmplHistFilter 1.3.6.1.4.1.9.9.636.1.2.1.15
Defines a filter for adding RTT results to the history buffer: none(1) - no history is recorded all(2) - the results of all completion times and failed completions are recorded overThreshold(3) - the results of completion times over cipslaUdpEchoTmplThreshold are recorded. failures(4) - the results of failed operations (only) are recorded.
OBJECT-TYPE    
  INTEGER none(1), all(2), overThreshold(3), failures(4)  

cipslaUdpEchoTmplStatsHours 1.3.6.1.4.1.9.9.636.1.2.1.16
The maximum number of hours for which statistics are maintained. Specifically this is the number of hourly groups to keep before rolling over. The value of one is not advisable because the hourly group will close and immediately be deleted before the network management station will have the opportunity to retrieve the statistics. The value of zero will shut off data collection.
OBJECT-TYPE    
  Unsigned32 0..25  

cipslaUdpEchoTmplDistBuckets 1.3.6.1.4.1.9.9.636.1.2.1.17
The maximum number of statistical distribution buckets to accumulate. Since this index does not rollover, only the first cipslaUdpEchoTmplStatsNumDistBuckets will be kept. The last cipslaUdpEchoTmplStatsNumDistBuckets will contain all entries from its distribution interval start point to infinity.
OBJECT-TYPE    
  Unsigned32 1..20  

cipslaUdpEchoTmplDistInterval 1.3.6.1.4.1.9.9.636.1.2.1.18
The statistical distribution buckets interval. Distribution Bucket Example: cipslaUdpEchoTmplDistBuckets = 5 buckets cipslaUdpEchoTmplDistInterval = 10 milliseconds | Bucket 1 | Bucket 2 | Bucket 3 | Bucket 4 | Bucket 5 | | 0-9 ms | 10-19 ms | 20-29 ms | 30-39 ms | 40-Inf ms | Odd Example: cipslaUdpEchoTmplDistBuckets = 1 buckets cipslaUdpEchoTmplDistInterval = 10 milliseconds | Bucket 1 | | 0-Inf ms | Thus, this odd example shows that the value of cipslaUdpEchoTmplDistInterval does not apply when cipslaUdpEchoTmplDistBuckets is one.
OBJECT-TYPE    
  Unsigned32 1..100  

cipslaUdpEchoTmplStorageType 1.3.6.1.4.1.9.9.636.1.2.1.19
The storage type of this conceptual row.
OBJECT-TYPE    
  StorageType  

cipslaUdpEchoTmplRowStatus 1.3.6.1.4.1.9.9.636.1.2.1.20
The status of the conceptual UDP echo template control row. When the status is active, all the read-create objects in that row can be modified.
OBJECT-TYPE    
  RowStatus  

cipslaTcpConnTmplTable 1.3.6.1.4.1.9.9.636.1.3
A table that contains TCP connect template specific definitions.
OBJECT-TYPE    
  SEQUENCE OF  
    CipslaTcpConnTmplEntry

cipslaTcpConnTmplEntry 1.3.6.1.4.1.9.9.636.1.3.1
A row entry representing an IPSLA TCP connect template.
OBJECT-TYPE    
  CipslaTcpConnTmplEntry  

cipslaTcpConnTmplName 1.3.6.1.4.1.9.9.636.1.3.1.1
A string which specifies the TCP connect template name.
OBJECT-TYPE    
  SnmpAdminString SIZE(1..64)  

cipslaTcpConnTmplDescription 1.3.6.1.4.1.9.9.636.1.3.1.2
A string which provides description for the TCP connect template.
OBJECT-TYPE    
  SnmpAdminString SIZE(0..128)  

cipslaTcpConnTmplControlEnable 1.3.6.1.4.1.9.9.636.1.3.1.3
If this object is enabled, then the IP SLA application will send control messages to a responder, residing on the target router to respond to the data request packets being sent by the source router.
OBJECT-TYPE    
  TruthValue  

cipslaTcpConnTmplSrcAddrType 1.3.6.1.4.1.9.9.636.1.3.1.4
An enumerated value which specifies the IP address type of the source. It must be used along with the cipslaTcpConnTmplSrcAddr object.
OBJECT-TYPE    
  InetAddressType  

cipslaTcpConnTmplSrcAddr 1.3.6.1.4.1.9.9.636.1.3.1.5
A string which specifies the IP address of the source.
OBJECT-TYPE    
  InetAddress  

cipslaTcpConnTmplSrcPort 1.3.6.1.4.1.9.9.636.1.3.1.6
This object represents the source's port number. If this object is not specified, the application will get a port allocated by the system.
OBJECT-TYPE    
  InetPortNumber  

cipslaTcpConnTmplTimeOut 1.3.6.1.4.1.9.9.636.1.3.1.7
Specifies the duration to wait for an IP SLA operation completion. For connection oriented protocols, this may cause the connection to be closed by the operation. Once closed, it will be assumed that the connection reestablishment will be performed. To prevent unwanted closure of connections, be sure to set this value to a realistic connection timeout.
OBJECT-TYPE    
  Unsigned32 0..604800000  

cipslaTcpConnTmplVerifyData 1.3.6.1.4.1.9.9.636.1.3.1.8
When set to true, the resulting data in each IP SLA operation is compared with the expected data. This includes checking header information (if possible) and exact packet size.
OBJECT-TYPE    
  TruthValue  

cipslaTcpConnTmplTOS 1.3.6.1.4.1.9.9.636.1.3.1.9
This object represents the type of service octet in an IP header.
OBJECT-TYPE    
  Unsigned32 0..255  

cipslaTcpConnTmplThreshold 1.3.6.1.4.1.9.9.636.1.3.1.10
This object defines an administrative threshold limit. If the IP SLA operation time exceeds this limit and if the condition specified in cipslaTcpConnTmplHistFilter is satisfied, one threshold crossing occurrence will be counted.
OBJECT-TYPE    
  Unsigned32 0..2147483647  

cipslaTcpConnTmplHistLives 1.3.6.1.4.1.9.9.636.1.3.1.11
The maximum number of history lives to record. A life is defined by the countdown (or transition) to zero by the cipslaAutoGroupScheduleLife object. A new life is created when the same conceptual control row is restarted via the transition of the cipslaAutoGroupScheduleLife object and its subsequent countdown. The value of zero will shut off all data collection.
OBJECT-TYPE    
  Unsigned32 0..2  

cipslaTcpConnTmplHistBuckets 1.3.6.1.4.1.9.9.636.1.3.1.12
The maximum number of history buckets to record. This value should be set to the number of operations to keep per lifetime. After cipslaTcpConnTmplHistBuckets are filled, the oldest entries are deleted and the most recent cipslaTcpConnTmplHistBuckets buckets are retained.
OBJECT-TYPE    
  Unsigned32 1..60  

cipslaTcpConnTmplHistFilter 1.3.6.1.4.1.9.9.636.1.3.1.13
Defines a filter for adding RTT results to the history buffer: none(1) - no history is recorded all(2) - the results of all completion times and failed completions are recorded overThreshold(3) - the results of completion times over cipslaTcpConnTmplThreshold are recorded. failures(4) - the results of failed operations (only) are recorded.
OBJECT-TYPE    
  INTEGER none(1), all(2), overThreshold(3), failures(4)  

cipslaTcpConnTmplStatsHours 1.3.6.1.4.1.9.9.636.1.3.1.14
The maximum number of hours for which statistics are maintained. Specifically this is the number of hourly groups to keep before rolling over. The value of one is not advisable because the hourly group will close and immediately be deleted before the network management station will have the opportunity to retrieve the statistics. The value of zero will shut off data collection.
OBJECT-TYPE    
  Unsigned32 0..25  

cipslaTcpConnTmplDistBuckets 1.3.6.1.4.1.9.9.636.1.3.1.15
The maximum number of statistical distribution buckets to accumulate. Since this index does not rollover, only the first cipslaTcpConnTmplDistBuckets will be kept. The last cipslaTcpConnTmplDistBuckets will contain all entries from its distribution interval start point to infinity.
OBJECT-TYPE    
  Unsigned32 1..20  

cipslaTcpConnTmplDistInterval 1.3.6.1.4.1.9.9.636.1.3.1.16
The statistical distribution buckets interval. Distribution Bucket Example: cipslaTcpConnTmplDistBuckets = 5 buckets cipslaTcpConnTmplDistInterval = 10 milliseconds | Bucket 1 | Bucket 2 | Bucket 3 | Bucket 4 | Bucket 5 | | 0-9 ms | 10-19 ms | 20-29 ms | 30-39 ms | 40-Inf ms | Odd Example: cipslaTcpConnTmplDistBuckets = 1 buckets cipslaTcpConnTmplDistInterval = 10 milliseconds | Bucket 1 | | 0-Inf ms | Thus, this odd example shows that the value of cipslaTcpConnTmplDistInterval does not apply when cipslaTcpConnTmplDistBuckets is one.
OBJECT-TYPE    
  Unsigned32 1..100  

cipslaTcpConnTmplStorageType 1.3.6.1.4.1.9.9.636.1.3.1.17
The storage type of this conceptual row.
OBJECT-TYPE    
  StorageType  

cipslaTcpConnTmplRowStatus 1.3.6.1.4.1.9.9.636.1.3.1.18
The status of the conceptual tcp connect control row. When the status is active, all the read-create objects in that row can be modified.
OBJECT-TYPE    
  RowStatus  

ciscoIpSlaEchoMIBConform 1.3.6.1.4.1.9.9.636.2
OBJECT IDENTIFIER    

ciscoIpSlaEchoMIBCompliances 1.3.6.1.4.1.9.9.636.2.1
OBJECT IDENTIFIER    

ciscoIpSlaEchoMIBCompliance 1.3.6.1.4.1.9.9.636.2.1.1
The compliance statement for IP SLA (1) ICMP echo Template (2) UDP echo Template (3) TCP connect Template
MODULE-COMPLIANCE    

ciscoIpSlaEchoMIBGroups 1.3.6.1.4.1.9.9.636.2.2
OBJECT IDENTIFIER    

ciscoIpSlaIcmpEchoTmplGroup 1.3.6.1.4.1.9.9.636.2.2.1
A collection of objects related to ICMP echo Template.
OBJECT-GROUP    

ciscoIpSlaUdpEchoTmplGroup 1.3.6.1.4.1.9.9.636.2.2.2
A collection of objects related to UDP echo Template.
OBJECT-GROUP    

ciscoIpSlaTcpConnTmplGroup 1.3.6.1.4.1.9.9.636.2.2.3
A collection of objects related to TCP connect Template.
OBJECT-GROUP    

Defined Objects

CipslaIcmpEchoTmplEntry  
SEQUENCE    
  SnmpAdminString as cipslaIcmpEchoTmplName  
  SnmpAdminString as cipslaIcmpEchoTmplDescription  
  InetAddressType as cipslaIcmpEchoTmplSrcAddrType  
  InetAddress as cipslaIcmpEchoTmplSrcAddr  
  Unsigned32 as cipslaIcmpEchoTmplTimeOut  
  TruthValue as cipslaIcmpEchoTmplVerifyData  
  Unsigned32 as cipslaIcmpEchoTmplReqDataSize  
  Unsigned32 as cipslaIcmpEchoTmplTOS  
  SnmpAdminString as cipslaIcmpEchoTmplVrfName  
  Unsigned32 as cipslaIcmpEchoTmplThreshold  
  Unsigned32 as cipslaIcmpEchoTmplHistLives  
  Unsigned32 as cipslaIcmpEchoTmplHistBuckets  
  INTEGER as cipslaIcmpEchoTmplHistFilter  
  Unsigned32 as cipslaIcmpEchoTmplStatsHours  
  Unsigned32 as cipslaIcmpEchoTmplDistBuckets  
  Unsigned32 as cipslaIcmpEchoTmplDistInterval  
  StorageType as cipslaIcmpEchoTmplStorageType  
  RowStatus as cipslaIcmpEchoTmplRowStatus  

CipslaUdpEchoTmplEntry  
SEQUENCE    
  SnmpAdminString as cipslaUdpEchoTmplName  
  SnmpAdminString as cipslaUdpEchoTmplDescription  
  TruthValue as cipslaUdpEchoTmplControlEnable  
  InetAddressType as cipslaUdpEchoTmplSrcAddrType  
  InetAddress as cipslaUdpEchoTmplSrcAddr  
  InetPortNumber as cipslaUdpEchoTmplSrcPort  
  Unsigned32 as cipslaUdpEchoTmplTimeOut  
  TruthValue as cipslaUdpEchoTmplVerifyData  
  Unsigned32 as cipslaUdpEchoTmplReqDataSize  
  Unsigned32 as cipslaUdpEchoTmplTOS  
  SnmpAdminString as cipslaUdpEchoTmplVrfName  
  Unsigned32 as cipslaUdpEchoTmplThreshold  
  Unsigned32 as cipslaUdpEchoTmplHistLives  
  Unsigned32 as cipslaUdpEchoTmplHistBuckets  
  INTEGER as cipslaUdpEchoTmplHistFilter  
  Unsigned32 as cipslaUdpEchoTmplStatsHours  
  Unsigned32 as cipslaUdpEchoTmplDistBuckets  
  Unsigned32 as cipslaUdpEchoTmplDistInterval  
  StorageType as cipslaUdpEchoTmplStorageType  
  RowStatus as cipslaUdpEchoTmplRowStatus  

CipslaTcpConnTmplEntry  
SEQUENCE    
  SnmpAdminString as cipslaTcpConnTmplName  
  SnmpAdminString as cipslaTcpConnTmplDescription  
  TruthValue as cipslaTcpConnTmplControlEnable  
  InetAddressType as cipslaTcpConnTmplSrcAddrType  
  InetAddress as cipslaTcpConnTmplSrcAddr  
  InetPortNumber as cipslaTcpConnTmplSrcPort  
  Unsigned32 as cipslaTcpConnTmplTimeOut  
  TruthValue as cipslaTcpConnTmplVerifyData  
  Unsigned32 as cipslaTcpConnTmplTOS  
  Unsigned32 as cipslaTcpConnTmplThreshold  
  Unsigned32 as cipslaTcpConnTmplHistLives  
  Unsigned32 as cipslaTcpConnTmplHistBuckets  
  INTEGER as cipslaTcpConnTmplHistFilter  
  Unsigned32 as cipslaTcpConnTmplStatsHours  
  Unsigned32 as cipslaTcpConnTmplDistBuckets  
  Unsigned32 as cipslaTcpConnTmplDistInterval  
  StorageType as cipslaTcpConnTmplStorageType  
  RowStatus as cipslaTcpConnTmplRowStatus