
CISCO-LAG-MIB
File:
CISCO-LAG-MIB.mib (32724 bytes)
Imported modules
Imported symbols
Defined Objects
| ciscoLagMIB |
1.3.6.1.4.1.9.9.225 |
| Cisco Link Aggregation module for managing IEEE Std 802.3ad. This MIB provides Link Aggregation information that are either excluded by IEEE Std 802.3ad (IEEE8023-LAG-MIB) or specific to Cisco products. |
| MODULE-IDENTITY |
|
|
|
| clagAggDistributionMplsProtocol |
1.3.6.1.4.1.9.9.225.1.1.3 |
| This object controls the load balancing algorithms used on this LACP interface to distribute outgoing MPLS data frames among its component interfaces. This object is only instantiated on platforms which support aggregation load balancing for MPLS packets. |
| OBJECT-TYPE |
|
|
|
| |
ClagDistributionMplsProtocol |
|
|
| clagAggHashDistMethodGlobalConfig |
1.3.6.1.4.1.9.9.225.1.1.5 |
| Specifies the global configuration for hash distribution method applied on a port channel interface among its channel members. adaptive(1) : Adaptive hash distribution for the bundle among port channel members. fixed(2) : Fixed hash distribution for the bundle among port channel members. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
adaptive(1), fixed(2) |
|
| clagAgg |
1.3.6.1.4.1.9.9.225.1.2 |
| OBJECT IDENTIFIER |
|
|
|
| clagAggProtocolEntry |
1.3.6.1.4.1.9.9.225.1.2.1.1 |
| Entry containing aggregation protocol type for a particular interface. An entry is created in this table when its associated ifEntry is created and that interface supports link aggregation. The entry of this table is deleted when the associated ifEntry is removed. |
| OBJECT-TYPE |
|
|
|
| |
ClagAggProtocolEntry |
|
|
| clagAggProtocolType |
1.3.6.1.4.1.9.9.225.1.2.1.1.1 |
| The aggregation protocol type for the interface. On some platforms, aggregation protocol may be assigned per group. The group can be a collection of the ports which belong to a module or system. If the aggregation protocol is assigned to any of the ports in such group then the aggregation protocol will apply to all ports in the same group. On some platforms, aggregation protocol type can be assigned per aggregator. If multiple ports belong to a aggregator, the aggregation protocol assigned to any of the ports in such aggregator will apply to all ports in the same. |
| OBJECT-TYPE |
|
|
|
| |
ClagAggregationProtocol |
|
|
| clagAggPortTable |
1.3.6.1.4.1.9.9.225.1.3.1 |
| A table that contains information about every aggregation port that is associated with this system. This table contains additional objects for the dot3adAggPortTable. |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
ClagAggPortEntry |
|
| clagAggPortEntry |
1.3.6.1.4.1.9.9.225.1.3.1.1 |
| An entry containing additional management information applicable to a particular aggregation port. |
| OBJECT-TYPE |
|
|
|
| |
ClagAggPortEntry |
|
|
| clagAggPortRate |
1.3.6.1.4.1.9.9.225.1.3.1.1.2 |
| Specifies the requested exchange rate of LACP packets on this interface. fast(1) : The device requests its peers to send LACP packets at fast rate to this interface. normal(2): The decice requests its peers to send LACP packets at normal rate to this interface. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
fast(1), normal(2) |
|
| clagAggPortListEntry |
1.3.6.1.4.1.9.9.225.1.4.1.1 |
| A list of the ports associated with a given Aggregator. |
| OBJECT-TYPE |
|
|
|
| |
ClagAggPortListEntry |
|
|
| clagAggPortListPorts |
1.3.6.1.4.1.9.9.225.1.4.1.1.1 |
| This object contains a list of ports currently associated with this Aggregator in the format of '[number_of_ports][cieIfDot1dBaseMappingPort1][...] [cieIfDot1dBaseMappingPortn]' where [number_of_ports] is of size 2 octet and indicates the number of ports contains in this object. It also indicates the number of cieIfDot1dBaseMappingPort field following this field. [cieIfDot1dBaseMappingPort'n'] is the value of cieIfDot1dBaseMappingPort of the 'n' port associated with this Aggregation and has size of 2 octets where n is up to [number_of_ports]. |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
SIZE(2..256) |
|
| clagAggChannelIfEntry |
1.3.6.1.4.1.9.9.225.1.5.1.1 |
| An entry containing port channel configuration information for port channel interfaces. |
| OBJECT-TYPE |
|
|
|
| |
ClagAggChannelIfEntry |
|
|
| clagAggChannelIfMinLink |
1.3.6.1.4.1.9.9.225.1.5.1.1.3 |
| Specifies the minimum number of bundled member ports that are needed in order for this port channel interface to be operational. A value of zero for this object indicates that no minimum number of bundled member ports are required for this port channel interface to be operational. |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| clagAggChannelIfHashDistAdminMethod |
1.3.6.1.4.1.9.9.225.1.5.1.1.4 |
| Specifies the hash distribution method that is administratively configured on this port channel interface upon its channel membership transition event. none(1) : Hash distribution algorithm on this port channel interface is not specifically configured and global configuration of clagAggHashDistMethodGlobalConfig will be applied on this port channel interface. adaptive(2) : Adaptive hash distribution for this port channel interface among its channel members. fixed(3) : Fixed hash distribution for this port channel interface among its channel members. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(1), adaptive(2), fixed(3) |
|
| clagAggChannelIfHashDistOperMethod |
1.3.6.1.4.1.9.9.225.1.5.1.1.5 |
| Specifies the operational hash distribution method for this port channel interface among the port channel members. other(1) : None of the following. adaptive(2) : Adaptive hash distribution for the port channel interface among its channel members. fixed(3) : Fixed hash distribution for the port channel among channel members. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
other(1), adaptive(2), fixed(3) |
|
| clagAggProtocolGroup |
1.3.6.1.4.1.9.9.225.3.2.1 |
| The object that provide aggregation protocol type of an interface. These are additional to the IEEE Std 802.3ad MIB. |
| OBJECT-GROUP |
|
|
|
| clagAggPortGroup |
1.3.6.1.4.1.9.9.225.3.2.2 |
| A collection of objects that provide admin status about an aggregation port. These are additional to the IEEE Std 802.3ad MIB. |
| OBJECT-GROUP |
|
|
|
| clagAggDistributionGroup |
1.3.6.1.4.1.9.9.225.3.2.3 |
| A collection of objects that provide the load balancing information for an aggregator. These are additional to the IEEE Std 802.3ad MIB. |
| OBJECT-GROUP |
|
|
|
| clagAggDistributionMplsGroup |
1.3.6.1.4.1.9.9.225.3.2.4 |
| A collection of objects that provide the load balancing information for an aggregator for MPLS packets. These are additional to the IEEE Std 802.3ad MIB. |
| OBJECT-GROUP |
|
|
|
| clagAggRateGroup |
1.3.6.1.4.1.9.9.225.3.2.7 |
| A collection of object that provides information about the rate at which LACP packets are ingressed on interfaces. |
| OBJECT-GROUP |
|
|
|
| clagAggHashDistGlobalGroup |
1.3.6.1.4.1.9.9.225.3.2.10 |
| A collection of object that provides information about global configuration of hash distribution method on port channel interface. |
| OBJECT-GROUP |
|
|
|
Defined Objects
| ClagDistributionProtocol |
|
| An enumerated type for all the supported load balancing algorithms used on the LACP interface to distribute outgoing data frames among its component interaces, such as IP address. ip(1) IP address mac(2) MAC address port(3) port number vlanIpPort(4) vlan number, IP address and port number |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
ip(1), mac(2), port(3), vlanIpPort(4) |
|
| ClagDistributionAddressMode |
|
| An enumerated type for all the supported load balancing address modes to distribute traffic across multiple links. The address mode can be source, destination, or both used on this LACP interface to distribute outgoing data frames among its component interfaces. source(1) Source address. destination(2) Destination address. both(3) both, Source and Destination. |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
source(1), destination(2), both(3) |
|
| ClagDistributionMplsProtocol |
|
| An enumerated type for all the supported load balancing algorithms used on the LACP interface to distribute outgoing MPLS (Multi-Protocol Label Switching) data frames among its component interfaces, such as MPLS label. label(1) MPLS label labelIp(2) MPLS label or IP address |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
label(1), labelIp(2) |
|
| ClagAggregationProtocol |
|
| An enumerated type for all the supported aggregation protocols. lacp(1) Link Aggregation Control Protocol(LACP), IEEE 802.3ad pagp(2) Port Aggregation Protocol |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
lacp(1), pagp(2) |
|
| ClagPortAdminStatus |
|
| An enumerated type for all the LACP administrative states on a particular aggregation port. off(1) No LACP involved on the aggregation port. on(2) The aggregation port always join link aggregation whithout any LACP protocol involved. active(3) Active LACP indicates the port's preference to participate in the protocol regardless of Partner's control value. passive(4) Passive indicates the port's preference for not transmitting LACP PDU unless its Partner's control value is Active LACP. |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
off(1), on(2), active(3), passive(4) |
|
| ClagAggPortEntry |
|
| SEQUENCE |
|
|
|
| |
ClagPortAdminStatus as clagAggPortAdminStatus |
|
|
| |
INTEGER as clagAggPortRate |
|
|
| ClagAggPortListEntry |
|
| SEQUENCE |
|
|
|
| |
OCTET STRING as clagAggPortListPorts |
|
|
| ClagAggChannelIfEntry |
|
| SEQUENCE |
|
|
|
| |
TruthValue as clagAggChannelIfFastSwitchOver |
|
|
| |
Unsigned32 as clagAggChannelIfMaxBundle |
|
|
| |
Unsigned32 as clagAggChannelIfMinLink |
|
|
| |
INTEGER as clagAggChannelIfHashDistAdminMethod |
|
|
| |
INTEGER as clagAggChannelIfHashDistOperMethod |
|
|