CISCO-LWAPP-DOT11-CLIENT-MIB

File: CISCO-LWAPP-DOT11-CLIENT-MIB.mib (16031 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
CISCO-SMI SNMP-FRAMEWORK-MIB CISCO-LWAPP-TC-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
MODULE-COMPLIANCE OBJECT-GROUP NOTIFICATION-GROUP
TruthValue MacAddress ciscoMgmt
SnmpAdminString CLApIfType CLDot11ClientStatus

Defined Objects

ciscoLwappDot11ClientMIB 1.3.6.1.4.1.9.9.599
This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Access Point Protocol tunnel from Cisco Light-weight LWAPP Access Points. Information provided by this MIB is about the configuration and monitoring of 802.11 wireless clients in the network. The relationship between CC and the LWAPP APs can be depicted as follows: +......+ +......+ +......+ +......+ + + + + + + + + + CC + + CC + + CC + + CC + + + + + + + + + +......+ +......+ +......+ +......+ .. . . . .. . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + AP + + AP + + AP + + AP + + AP + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ . . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + MN + + MN + + MN + + MN + + MN + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ The LWAPP tunnel exists between the controller and the APs. The MNs communicate with the APs through the protocol defined by the 802.11 standard. LWAPP APs, upon bootup, discover and join one of the controllers and the controller pushes the configuration, that includes the WLAN parameters, to the LWAPP APs. The APs then encapsulate all the 802.11 frames from wireless clients inside LWAPP frames and forward the LWAPP frames to the controller. GLOSSARY Access Point ( AP ) An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides access to the distribution services via the wireless medium for associated clients. LWAPP APs encapsulate all the 802.11 frames in LWAPP frames and sends them to the controller to which it is logically connected. Light Weight Access Point Protocol ( LWAPP ) This is a generic protocol that defines the communication between the Access Points and the Central Controller. Mobile Node ( MN ) A roaming 802.11 wireless device in a wireless network associated with an access point. Mobile Node, Mobile Station(Ms) and client are used interchangeably. Wireless local-area network ( WLAN ) A local-area network that uses high-frequency radio waves rather than wires to communicate between nodes. Workgroup Bridge ( WGB ) A WGB can provide a wireless infrastructure connection for a Ethernet-enabled devices. Devices that do not have a wireless client adapter in order to connect to the wireless network can be connected to a WGB through Ethernet port. REFERENCE [1] Wireless LAN Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications [2] Draft-obara-capwap-lwapp-00.txt, IETF Light Weight Access Point Protocol
MODULE-IDENTITY    

ciscoLwappDot11ClientMIBNotifs 1.3.6.1.4.1.9.9.599.0
OBJECT IDENTIFIER    

ciscoLwappDot11ClientKeyDecryptError 1.3.6.1.4.1.9.9.599.0.1
Issued when a decrypt error occurs. The WEP WPA or WPA2 Key configured at the station may be wrong.
NOTIFICATION-TYPE    
  cldcAssociationMode  
  cldcApMacAddress  
  cldcIfType  

ciscoLwappDot11ClientMIBObjects 1.3.6.1.4.1.9.9.599.1
OBJECT IDENTIFIER    

cldcConfigObjects 1.3.6.1.4.1.9.9.599.1.1
OBJECT IDENTIFIER    

cldcKeyDecryptErrorEnabled 1.3.6.1.4.1.9.9.599.1.1.1
The object to control the generation of ciscoLwappDot11ClientKeyDecryptError notification. A value of 'true' indicates that the agent generates ciscoLwappDot11ClientKeyDecryptError notification. A value of 'false' indicates that the agent doesn't generate ciscoLwappDot11ClientKeyDecryptError notification.
OBJECT-TYPE    
  TruthValue  

cldcNotifObjects 1.3.6.1.4.1.9.9.599.1.2
OBJECT IDENTIFIER    

cldcStatusObjects 1.3.6.1.4.1.9.9.599.1.3
OBJECT IDENTIFIER    

cldcClientTable 1.3.6.1.4.1.9.9.599.1.3.1
This table represents the 802.11 wireless clients that are associated with the APs that have joined this controller. An entry is created automatically by the controller when the client gets associated to the AP. An existing entry gets deleted when the association gets dropped. Each client added to this table is uniquely identified by the client's MAC address.
OBJECT-TYPE    
  SEQUENCE OF  
    CldcClientEntry

cldcClientEntry 1.3.6.1.4.1.9.9.599.1.3.1.1
Each entry represents a conceptual row in this table and provides the information about the clients associated to the APs that have joined the controller. An entry is identified the client's MAC address.
OBJECT-TYPE    
  CldcClientEntry  

cldcClientMacAddress 1.3.6.1.4.1.9.9.599.1.3.1.1.1
This object specifies the MAC address of the client for this entry and uniquely identifies this entry.
OBJECT-TYPE    
  MacAddress  

cldcClientStatus 1.3.6.1.4.1.9.9.599.1.3.1.1.2
The object that represents the current status of the client.
OBJECT-TYPE    
  CLDot11ClientStatus  

cldcClientWlanProfileName 1.3.6.1.4.1.9.9.599.1.3.1.1.3
This object specifies the WLAN Profile name this 802.11 wireless client is connected to.
OBJECT-TYPE    
  SnmpAdminString SIZE(0..32)  

cldcClientWgbStatus 1.3.6.1.4.1.9.9.599.1.3.1.1.4
The object that represents the work group bridging status of a DOT11 client. 'regClient' - The client is a wireless client 'wgbClient' - The client is connected via a WGB 'wgb' - The client is the WGB itself.
OBJECT-TYPE    
  INTEGER regClient(1), wgbClient(2), wgb(3)  

cldcClientWgbMacAddress 1.3.6.1.4.1.9.9.599.1.3.1.1.5
This object specifies the MAC address of the WGB this 802.11 wireless client to which it is connected. This returns a non-zero value when the cldcClientWgbStatus is wgbClient.
OBJECT-TYPE    
  MacAddress  

cldcClientProtocol 1.3.6.1.4.1.9.9.599.1.3.1.1.6
The 802.11 protocol type of the client. 'dot11a' - The client is using 802.11a standard to connect to the access point (AP) 'dot11b' - The client is using 802.11b standard to connect to the access point (AP) 'dot11g' - The client is using 802.11g standard to connect to the access point (AP) 'unknown' - The client protocol is unknown 'mobile' - The client using mobile wireless to connect to the access point (AP). 'dot11n24' - The client is using 802.11n standard with 2.4 GHz frequency to connect to the access point (AP) 'dot11n5' - The client is using 802.11n standard with 5 GHz frequency to connect to the access point (AP).
OBJECT-TYPE    
  INTEGER dot11a(1), dot11b(2), dot11g(3), unknown(4), mobile(5), dot11n24(6), dot11n5(7)  

cldcAssociationMode 1.3.6.1.4.1.9.9.599.1.3.1.1.7
The association mode for which the key decrypt error occurred.
OBJECT-TYPE    
  INTEGER unknown(1), wep(2), wpa(3), wpa2(4)  

cldcApMacAddress 1.3.6.1.4.1.9.9.599.1.3.1.1.8
This object specifies the radio MAC address of a LWAPP AP.
OBJECT-TYPE    
  MacAddress  

cldcIfType 1.3.6.1.4.1.9.9.599.1.3.1.1.9
This object specifies the wireless interace type.
OBJECT-TYPE    
  CLApIfType  

ciscoLwappDot11ClientMIBConform 1.3.6.1.4.1.9.9.599.2
OBJECT IDENTIFIER    

ciscoLwappDot11ClientMIBCompliances 1.3.6.1.4.1.9.9.599.2.1
OBJECT IDENTIFIER    

ciscoLwappDot11ClientMIBCompliance 1.3.6.1.4.1.9.9.599.2.1.1
The compliance statement for the SNMP entities that implement this MIB.
MODULE-COMPLIANCE    

ciscoLwappDot11ClientMIBGroups 1.3.6.1.4.1.9.9.599.2.2
OBJECT IDENTIFIER    

ciscoLwappDot11ClientMIBConfigGroup 1.3.6.1.4.1.9.9.599.2.2.1
This collection of objects specifies the required configuration parameters for the 802.11 wireless clients.
OBJECT-GROUP    

ciscoLwappDot11ClientMIBNotifsGroup 1.3.6.1.4.1.9.9.599.2.2.2
This collection of objects specifies the notifications for the 802.11 wireless clients.
NOTIFICATION-GROUP    

ciscoLwappDot11ClientMIBStatusGroup 1.3.6.1.4.1.9.9.599.2.2.3
This collection of objects specifies the required status parameters for the 802.11 wireless clients.
OBJECT-GROUP    

Defined Objects

CldcClientEntry  
SEQUENCE    
  MacAddress as cldcClientMacAddress  
  CLDot11ClientStatus as cldcClientStatus  
  SnmpAdminString as cldcClientWlanProfileName  
  INTEGER as cldcClientWgbStatus  
  MacAddress as cldcClientWgbMacAddress  
  INTEGER as cldcClientProtocol  
  INTEGER as cldcAssociationMode  
  MacAddress as cldcApMacAddress  
  CLApIfType as cldcIfType