
CISCO-LWAPP-RRM-MIB
File:
CISCO-LWAPP-RRM-MIB.mib (19196 bytes)
Imported modules
Imported symbols
Defined Objects
| ciscoLwappRrmMIB |
1.3.6.1.4.1.9.9.615 |
| This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Access Point Protocol tunnel from Cisco Light-weight LWAPP Access Points. Information provided by this MIB is used to study the RRM on the WLAN. The relationship between CC and the LWAPP APs can be depicted as follows: +......+ +......+ +......+ + + + + + + + CC + + CC + + CC + + + + + + + +......+ +......+ +......+ .. . . .. . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ + + + + + + + + + AP + + AP + + AP + + AP + + + + + + + + + +......+ +......+ +......+ +......+ . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ + + + + + + + + + MN + + MN + + MN + + MN + + + + + + + + + +......+ +......+ +......+ +......+ The LWAPP tunnel exists between the controller and the APs. The MNs communicate with the APs through the protocol defined by the 802.11 standard. LWAPP APs, upon bootup, discover and join one of the controllers and the controller pushes the configuration, that includes the WLAN parameters, to the LWAPP APs. The APs then encapsulate all the 802.11 frames from wireless clients inside LWAPP frames and forward the LWAPP frames to the controller. GLOSSARY Access Point ( AP ) An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides access to the distribution services via the wireless medium for associated clients. LWAPP APs encapsulate all the 802.11 frames in LWAPP frames and sends them to the controller to which it is logically connected. Light Weight Access Point Protocol ( LWAPP ) This is a generic protocol that defines the communication between the Access Points and the Central Controller. Mobile Node ( MN ) A roaming 802.11 wireless device in a wireless network associated with an access point. Mobile Node and client are used interchangeably. Radio Resource Management ( RRM ) RRM is the system level control of co-channel interference and other radio transmission characteristics in wireless communication systems. REFERENCE [1] Wireless LAN Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications [2] Draft-obara-capwap-lwapp-00.txt, IETF Light Weight Access Point Protocol |
| MODULE-IDENTITY |
|
|
|
| clrRrmParametersEntry |
1.3.6.1.4.1.9.9.615.1.1.1.1 |
| An entry in this table corresponds to a particular 802.11 interface type. |
| OBJECT-TYPE |
|
|
|
| |
ClrRrmParametersEntry |
|
|
| clrRrmParametersPicoCellMode |
1.3.6.1.4.1.9.9.615.1.1.1.1.2 |
| This object specifies the 802.11 pico-cell mode. disable - pico-cell mode is disabled. picoCellv1 - legacy pico-cell mode is in use. picoCellv2 - in this mode the APs to use the tuple information from the clrRrmTupleTable. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disable(1), picoCellv1(2), picoCellv2(3) |
|
| clrRrmTupleTable |
1.3.6.1.4.1.9.9.615.1.1.2 |
| A list of tuple tuning parameters that are advertised to all APs registered under this 802.11 interface type. This information is pushed down to to 802.11 clients by the APs to operate under high density. Entries in this table are automatically created by the controller with default values. |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
ClrRrmTupleEntry |
|
| clrRrmTupleEntry |
1.3.6.1.4.1.9.9.615.1.1.2.1 |
| Each entry represents the tuning parameters for an interface type. These entries are applicable only when object clrRrmParametersPicoCellMode is is set to 'picoCellv2'. |
| OBJECT-TYPE |
|
|
|
| |
ClrRrmTupleEntry |
|
|
| clrRrmTupleRxSenseThreshold |
1.3.6.1.4.1.9.9.615.1.1.2.1.3 |
| This object represents the current value for receiver's sensitivity threshold. This value is sent to the APs that join the controller. The APs in turn propogate this value to the 802.11 clients. The client will either use this value or will tune receiver's sensitivity settings between the range of values configured by clrRrmTupleRxSenseThresholdMin and clrRrmTupleRxSenseThresholdMax objects. |
| OBJECT-TYPE |
|
|
|
| |
ClrRrmTupleTuningRange |
|
|
| clrRrmTupleCcaSenseThreshold |
1.3.6.1.4.1.9.9.615.1.1.2.1.6 |
| This object represents the current value for clear channel (CCA) sensitivity. This value is sent to the APs that join the controller. The APs in turn propogate this value to the 802.11 clients. The client will either use this value or may tune CCA sensitivity settings between the range of values configured by clrRrmTupleCcaSenseThresholdMin and clrRrmTupleCcaSenseThresholdMax objects. |
| OBJECT-TYPE |
|
|
|
| |
ClrRrmTupleTuningRange |
|
|
| clrRrmTupleTransmitPowerLevel |
1.3.6.1.4.1.9.9.615.1.1.2.1.9 |
| This object represents the current value for transmit power level. This value is sent to the APs that join the controller. The APs in turn propogate this value to the 802.11 clients. The client will either use this value or may tune the transmit power settings between the range of values configured by clrRrmTupleTransmitPowerLevelMin and clrRrmTupleTransmitPowerLevelMax objects. |
| OBJECT-TYPE |
|
|
|
| |
ClrRrmTupleTuningRange |
|
|
| clrRrmTupleSetDefault |
1.3.6.1.4.1.9.9.615.1.1.2.1.10 |
| This object restores the other objects in this table to default value. Setting this value to 'true' wil restore defaults as indicated by the DEFVAL clause. This object can only be set to 'true' and all other values are rejected. This object will always return 'false' for get operations. |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| clrRrmChannelTable |
1.3.6.1.4.1.9.9.615.1.1.4 |
| This table represents the channel information for an AP's 802.11 interface. Based on the country that an AP operates in, it gets assigned to a regulatory domain. For a given regulatory domain a fixed number of channels are assigned automatically to an AP for a given interface. This table represents this information. Entries are automatically created on the controller as APs associate. Entries are removed when the APs disassociate. |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
ClrRrmChannelEntry |
|
| clrRrmChannelEntry |
1.3.6.1.4.1.9.9.615.1.1.4.1 |
| Each entry in this table provides the channel information for an 802.11 interface in an AP. |
| OBJECT-TYPE |
|
|
|
| |
ClrRrmChannelEntry |
|
|
| clrRrmChannelNum |
1.3.6.1.4.1.9.9.615.1.1.4.1.1 |
| The channel nubmer for this entry. This value represents the unique channel number on this 802.11 interface for this regulatory domain. |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| clrRrmChannelDcaState |
1.3.6.1.4.1.9.9.615.1.1.4.1.2 |
| This object indicates whether this channel is part of the dynamic channel allocation (DCA) list. A value of 'true' indicates that the DCA for this channel is enabled. A value of 'false' indicates that the DCA for this channel is disabled. |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
Defined Objects
| ClrRrmParametersEntry |
|
| SEQUENCE |
|
|
|
| |
CLApIfType as clrRrmParametersType |
|
|
| |
INTEGER as clrRrmParametersPicoCellMode |
|
|
| ClrRrmTupleEntry |
|
| SEQUENCE |
|
|
|
| |
ClrRrmTupleTuningRange as clrRrmTupleRxSenseThresholdMin |
|
|
| |
ClrRrmTupleTuningRange as clrRrmTupleRxSenseThresholdMax |
|
|
| |
ClrRrmTupleTuningRange as clrRrmTupleRxSenseThreshold |
|
|
| |
ClrRrmTupleTuningRange as clrRrmTupleCcaSenseThresholdMin |
|
|
| |
ClrRrmTupleTuningRange as clrRrmTupleCcaSenseThresholdMax |
|
|
| |
ClrRrmTupleTuningRange as clrRrmTupleCcaSenseThreshold |
|
|
| |
ClrRrmTupleTuningRange as clrRrmTupleTransmitPowerLevelMin |
|
|
| |
ClrRrmTupleTuningRange as clrRrmTupleTransmitPowerLevelMax |
|
|
| |
ClrRrmTupleTuningRange as clrRrmTupleTransmitPowerLevel |
|
|
| |
TruthValue as clrRrmTupleSetDefault |
|
|
| ClrRrmChannelEntry |
|
| SEQUENCE |
|
|
|
| |
Unsigned32 as clrRrmChannelNum |
|
|
| |
TruthValue as clrRrmChannelDcaState |
|
|