CISCO-POWER-ETHERNET-EXT-MIB

File: CISCO-POWER-ETHERNET-EXT-MIB.mib (32331 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
POWER-ETHERNET-MIB SNMP-FRAMEWORK-MIB CISCO-TC
CISCO-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Unsigned32
NOTIFICATION-TYPE MODULE-COMPLIANCE OBJECT-GROUP
NOTIFICATION-GROUP TruthValue pethPsePortEntry
pethMainPseGroupIndex SnmpAdminString EntPhysicalIndexOrZero
ciscoMgmt

Defined Objects

ciscoPowerEthernetExtMIB 1.3.6.1.4.1.9.9.402
A MIB module for extending the POWER-ETHERNET-MIB (RFC3621) to add objects which provide additional management information about Power Sourcing Equipment (PSE) not available in POWER-ETHERNET-MIB. Glossary Power Sourcing Equipment (PSE) These are devices supplying electrical power to other equipment. They are, for example, inline power switches, inline power daughterboards and power patch panels. Powered Device (PD) These are devices receiving their electrical power supply from Power Sourcing Equipment. They are, for example, IP telephones and wireless access points or bridges.
MODULE-IDENTITY    

cpeExtMIBNotifs 1.3.6.1.4.1.9.9.402.0
OBJECT IDENTIFIER    

cpeExtPolicingNotif 1.3.6.1.4.1.9.9.402.0.1
This notification is generated when the 'overdraw' or 'overdrawLog' bit in value of cpeExtPsePortAdditionalStatus is set or cleared.
NOTIFICATION-TYPE    
  cpeExtPsePortPolicingAction  
  cpeExtPsePortAdditionalStatus  
  cpeExtPsePortPwrAllocated  
  cpeExtPsePortMaxPwrDrawn  

cpeExtMIBObjects 1.3.6.1.4.1.9.9.402.1
OBJECT IDENTIFIER    

cpeExtDefaultAllocation 1.3.6.1.4.1.9.9.402.1.1
This object indicates the default inline power allocation per port. This is a global configuration parameter that applies to all inline power capable ports in the system. The system must consider this object as well as the per port configuration object, cpeExtPsePortPwrMax, when determining how much power to allocate to a port. The system will use the lower of the two numbers.
OBJECT-TYPE    
  Unsigned32  

cpeExtPsePortTable 1.3.6.1.4.1.9.9.402.1.2
This table extends the POWER-ETHERNET-MIB pethPsePortTable for power Ethernet ports on a Powered Sourcing Equipment (PSE) device.
OBJECT-TYPE    
  SEQUENCE OF  
    CpeExtPsePortEntry

cpeExtPsePortEntry 1.3.6.1.4.1.9.9.402.1.2.1
A cpeExtPsePortEntry extends a corresponding pethPsePortTable entry. This entry displays and controls more characteristics of a power Ethernet port on a PSE device.
OBJECT-TYPE    
  CpeExtPsePortEntry  

cpeExtPsePortEnable 1.3.6.1.4.1.9.9.402.1.2.1.1
This object is an extension of the pethPsePortAdminEnable object from RFC3621. It allows the user to be more specific when enabling the PSE functions. The states, 'auto', 'static' and 'limit' correspond to a value of 'true' for the pethPsePortAdminEnable object. The state 'disable' corresponds to a value of 'false' for the pethPsePortAdminEnable object. Setting this value to 'auto' enables Powered Device discovery on the interface and the amount of power allocated depends on the Powered Device discovered. If pethPsePortAdminEnable was 'false' prior to this set operation, then it will become 'true'. Setting this value to 'static' will also enable Powered Device discovery. However, this is different from 'auto' in that the amount of power is pre-allocated based on the configuration on the Power Sourcing Equipment. If pethPsePortAdminEnable was 'false' prior to this set operation, then it will become 'true'. Setting this value to 'limit' enables Powered Device discovery on the interface. The amount of power allocated depends on the Powered Device discovered and the value of cpeExtPsePortPwrMax. The lower value will be used. If pethPsePortAdminEnable was 'false' prior to this set operation, then it will become 'true'. Setting this value to 'disable' disables the PSE functions. The pethPsePortAdminEnable object will adopt the value of 'false' if it was 'true' prior to this set operation. When setting the pethPsePortAdminEnable object to 'false' this object cpeExtPsePortEnable will adopt the value of 'disable'. If cpeExtPsePortPolicingCapable of the PSE port, or cpeExtMainPsePwrMonitorCapable of the PSE port's main group, has the value of 'false', this object can only be set to 'auto', 'static' or 'disable'. Otherwise, this object can be set to 'auto', 'static', 'limit' or 'disable'.
OBJECT-TYPE    
  INTEGER auto(1), static(2), limit(3), disable(4)  

cpeExtPsePortDiscoverMode 1.3.6.1.4.1.9.9.402.1.2.1.2
This object indicates the discover mode used by the system to discover the PD. A value of 'unknown' indicates that the discover mode on the interface is unknown. A value of 'off' indicates that discovery is disabled on the interface. A value of 'ieee' indicates that the discover mode on the interface is IEEE based. A value of 'cisco' indicates that the discover mode on the interface is Cisco based. A value of 'ieeeAndCisco' indicates that the discover mode on the interface is both IEEE and Cisco based.
OBJECT-TYPE    
  INTEGER unknown(1), off(2), ieee(3), cisco(4), ieeeAndCisco(5)  

cpeExtPsePortDeviceDetected 1.3.6.1.4.1.9.9.402.1.2.1.3
This object indicates if a Powered Device (PD) has been detected on the interface. A value of 'true' indicates that a PD has been detected on the interface. A value of 'false' indicates that no PD has been detected on the interface.
OBJECT-TYPE    
  TruthValue  

cpeExtPsePortIeeePd 1.3.6.1.4.1.9.9.402.1.2.1.4
This object indicates whether the Powered Device attached to the interface is an IEEE compliant Powered Device or not. A value of 'true' indicates the attached Powered Device is an IEEE compliant Powered Device. A value of 'false' indicates the attached Powered Device is not an IEEE compliant Powered Device. This also means that the value of the corresponding object from the pethPsePortTable, pethPsePortPowerClassifications is irrelevant.
OBJECT-TYPE    
  TruthValue  

cpeExtPsePortAdditionalStatus 1.3.6.1.4.1.9.9.402.1.2.1.5
This object is an extension of the pethPsePortDetectionStatus object from RFC3621 and provides additional status information. deny: When set, the PD attached to the interface is being denied power due to insufficient power resources on the Power Sourcing Equipment. overdraw: When set, the PD attached to the interface is being denied power because the PD is trying to consume more power than it has been configured to consume. overdrawLog: When set, the PD attached to the interface is trying to consume more power than it has been configured to consume, but is not being denied power.
OBJECT-TYPE    
  BITS deny(0), overdraw(1), overdrawLog(2)  

cpeExtPsePortPwrMax 1.3.6.1.4.1.9.9.402.1.2.1.6
This indicates the maximum amount of power that the PSE will make available to the PD connected to this interface.
OBJECT-TYPE    
  Unsigned32  

cpeExtPsePortPwrAllocated 1.3.6.1.4.1.9.9.402.1.2.1.7
This object indicates the amount of power allocated from the PSE for the PD.
OBJECT-TYPE    
  Unsigned32  

cpeExtPsePortPwrAvailable 1.3.6.1.4.1.9.9.402.1.2.1.8
This object indicates the amount of power available for the PD to use. This value may differ from the value cpeExtPsePortPwrAllocated due to the efficiency issues of delivering the power from the PSE to the PD. When sufficient power is available to power a PD, this value should be equal to the lower of the two objects, cpeExtDefaultAllocation and cpeExtPsePortPwrMax.
OBJECT-TYPE    
  Unsigned32  

cpeExtPsePortPwrConsumption 1.3.6.1.4.1.9.9.402.1.2.1.9
This indicates the actual power consumption of the PD connected to this interface. It may not necessarily be equal to the value of cpeExtPsePortPwrAvailable.
OBJECT-TYPE    
  Unsigned32  

cpeExtPsePortMaxPwrDrawn 1.3.6.1.4.1.9.9.402.1.2.1.10
This indicates the maximum amount of power drawn by the PD connected to this interface, since it was powered on.
OBJECT-TYPE    
  Unsigned32  

cpeExtPsePortEntPhyIndex 1.3.6.1.4.1.9.9.402.1.2.1.11
The entPhysicalIndex value that uniquely identifies the PSE port. If the PSE port does not have a corresponding physical entry in entPhysicalTable or if the entPhysicalTable is not supported by the management system, this object has the value of zero.
OBJECT-TYPE    
  EntPhysicalIndexOrZero  

cpeExtPsePortPolicingCapable 1.3.6.1.4.1.9.9.402.1.2.1.12
This object indicates whether the PSE port hardware is capable of policing the port for proper power consumption based on the allocated value.
OBJECT-TYPE    
  TruthValue  

cpeExtPsePortPolicingEnable 1.3.6.1.4.1.9.9.402.1.2.1.13
This object allows the user to turn on or turn off the power policing of the PSE port. If the instance value of cpeExtPsePortPolicingCapable is 'TRUE', the user is allowed to set this object to 'on' or 'off'. Otherwise, this object is read-only and always has the value of 'off'.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

cpeExtPsePortPolicingAction 1.3.6.1.4.1.9.9.402.1.2.1.14
This object specifies the power policing action that the device will take on this PSE port when the real-time power consumption exceeds its max power allocation if the value of cpeExtPsePortPolicingEnable is 'on'. 'deny' - the device will deny the power to the PSE port 'logOnly' - the device will not deny the power to the PSE port
OBJECT-TYPE    
  INTEGER deny(1), logOnly(2)  

cpeExtPsePortPwrManAlloc 1.3.6.1.4.1.9.9.402.1.2.1.15
This object specifies the manual power allocation that the PSE will allocate to the PD connected to this interface regardless of the amount requested via CDP or IEEE. Setting this object value to zero disables the manual power allocation. Warning: Misconfiguring this manual power allocation may cause demage to the system and void the warranty. Take precautions not to oversubscribe the power supply.
OBJECT-TYPE    
  Unsigned32  

cpeExtMainPseTable 1.3.6.1.4.1.9.9.402.1.3
This table contains the additional information for the main PSE group in pethMainPseTable.
OBJECT-TYPE    
  SEQUENCE OF  
    CpeExtMainPseEntry

cpeExtMainPseEntry 1.3.6.1.4.1.9.9.402.1.3.1
A cpeExtMainPseEntry contains information about a particular pethMainPseGroupIndex. An entry is created by the agent when a main PSE group is added to the pethMainPseTable. An entry is deleted by the agent when a main PSE group is removed from the pethMainPseTable.
OBJECT-TYPE    
  CpeExtMainPseEntry  

cpeExtMainPseEntPhyIndex 1.3.6.1.4.1.9.9.402.1.3.1.1
The entPhysicalIndex value that uniquely identifies the main PSE group. If the main PSE group does not have a corresponding physical entry in entPhysicalTable or if the entPhysicalTable is not supported by the management system, then this object has the value of zero.
OBJECT-TYPE    
  EntPhysicalIndexOrZero  

cpeExtMainPseDescr 1.3.6.1.4.1.9.9.402.1.3.1.2
A textual string containing information about the Power Source Equipment (PSE) group.
OBJECT-TYPE    
  SnmpAdminString  

cpeExtMainPsePwrMonitorCapable 1.3.6.1.4.1.9.9.402.1.3.1.3
This object indicates if the given group is capable of monitoring the power consumption of the interfaces that belong to the group. The value 'true' means that the group is capable. The value 'false' means that the group in not capable.
OBJECT-TYPE    
  TruthValue  

cpeExtPdStatistics 1.3.6.1.4.1.9.9.402.1.4
OBJECT IDENTIFIER    

cpeExtPdStatsTotalDevices 1.3.6.1.4.1.9.9.402.1.4.1
This object indicates the total number of the powered devices with any power classifications in the system. Classification is a way to tag different terminals on the Power over LAN network according to their power consumption. Devices such as IP telephones, WLAN access points and others, will be classified according to their power requirements.
OBJECT-TYPE    
  Unsigned32  

cpeExtPdStatsTable 1.3.6.1.4.1.9.9.402.1.4.2
This table contains the statistics information of the powered devices fallen into different power classifications in the system.
OBJECT-TYPE    
  SEQUENCE OF  
    CpeExtPdStatsEntry

cpeExtPdStatsEntry 1.3.6.1.4.1.9.9.402.1.4.2.1
A cpeExtPdStatsEntry contains the statistics information about a particular power classification defined in cpeExtPdStatsIndex.
OBJECT-TYPE    
  CpeExtPdStatsEntry  

cpeExtPdStatsClass 1.3.6.1.4.1.9.9.402.1.4.2.1.1
The power classification as the index for the statistics information for powered devices. A value of 'cisco' indicates that the powered devices are CISCO proprietary and their power classification does not fall into any class in IEEE specifications. A value of 'class0' indicates that the power classification of the powered devices falls into class 0 in IEEE specifications. A value of 'class1' indicates that the power classification of the powered devices falls into class 1 in IEEE specifications. A value of 'class2' indicates that the power classification of the powered devices falls into class 2 in IEEE specifications. A value of 'class3' indicates that the power classification of the powered devices falls into class 3 in IEEE specifications.
OBJECT-TYPE    
  INTEGER cisco(1), class0(2), class1(3), class2(4), class3(5)  

cpeExtPdStatsDeviceCount 1.3.6.1.4.1.9.9.402.1.4.2.1.2
This object indicates the count of the powered devices whose power classification falls into a specific value of cpeExtPdStatsIndex.
OBJECT-TYPE    
  Unsigned32  

cpeExtPolicingNotifEnable 1.3.6.1.4.1.9.9.402.1.5
This object is used to enable/disable the the cpeExtPolicingNotif notification.
OBJECT-TYPE    
  TruthValue  

cpeExtMIBConformance 1.3.6.1.4.1.9.9.402.2
OBJECT IDENTIFIER    

cpeExtMIBCompliances 1.3.6.1.4.1.9.9.402.2.1
OBJECT IDENTIFIER    

cpeExtMIBCompliance 1.3.6.1.4.1.9.9.402.2.1.1
The compliance statement for the CISCO-POWER-ETHERNET-EXT-MIB.
MODULE-COMPLIANCE    

cpeExtMIBCompliance2 1.3.6.1.4.1.9.9.402.2.1.2
The compliance statement for the CISCO-POWER-ETHERNET-EXT-MIB.
MODULE-COMPLIANCE    

cpeExtMIBCompliance3 1.3.6.1.4.1.9.9.402.2.1.3
The compliance statement for the CISCO-POWER-ETHERNET-EXT-MIB.
MODULE-COMPLIANCE    

cpeExtMIBGroups 1.3.6.1.4.1.9.9.402.2.2
OBJECT IDENTIFIER    

cpeExtPsePortGroup 1.3.6.1.4.1.9.9.402.2.2.1
This group provides information and configuration objects in addition to those provided in the POWER-ETHERNET-MIB (RFC3621).
OBJECT-GROUP    

cpeExtPsePortGlobalConfigGroup 1.3.6.1.4.1.9.9.402.2.2.2
This is a collection of objects which provide global configuration of the PSE interfaces.
OBJECT-GROUP    

cpeExtPsePortPwrMonitorGroup 1.3.6.1.4.1.9.9.402.2.2.3
This is a collection of objects which provide power monitoring on PD's connected to the PSE interfaces.
OBJECT-GROUP    

cpeExtMainPseGroup 1.3.6.1.4.1.9.9.402.2.2.4
This is a collection of objects which provide additional information for the PSE group.
OBJECT-GROUP    

cpeExtPortEntityIndexGroup 1.3.6.1.4.1.9.9.402.2.2.5
This is a collection of objects which provide entity physical index information for PSE port.
OBJECT-GROUP    

cpeExtPortPolicingGroup 1.3.6.1.4.1.9.9.402.2.2.6
This is a collection of objects which provide the hardware power consumption policing information for PSE port.
OBJECT-GROUP    

cpeExtPdStatsGroup 1.3.6.1.4.1.9.9.402.2.2.7
This is a collection of objects which provide the statistics information for powered devices.
OBJECT-GROUP    

cpeExtMainPseGroup2 1.3.6.1.4.1.9.9.402.2.2.8
This is a collection of objects which provide additional information to identify the PSE group.
OBJECT-GROUP    

cpeExtPseGrpPwrGroup 1.3.6.1.4.1.9.9.402.2.2.9
This is a collection of objects which provide power monitoring information for the PSE group.
OBJECT-GROUP    

cpeExtPortPolicingActionGroup 1.3.6.1.4.1.9.9.402.2.2.10
This is a collection of objects which provide control of the power policing action of the PSE port.
OBJECT-GROUP    

cpeExtPortPwrManAllocGroup 1.3.6.1.4.1.9.9.402.2.2.11
This is a collection of objects which provide manual power allocation for the PSE port.
OBJECT-GROUP    

cpeExtPolicingNotifEnableGroup 1.3.6.1.4.1.9.9.402.2.2.12
A collection of object that provides control over power consumption policing status notification.
OBJECT-GROUP    

cpeExtPolicingNotifGroup 1.3.6.1.4.1.9.9.402.2.2.13
This is a collection of notifications related to power consumption policing information for PSE ports.
NOTIFICATION-GROUP    

Defined Objects

CpeExtPsePortEntry  
SEQUENCE    
  INTEGER as cpeExtPsePortEnable  
  INTEGER as cpeExtPsePortDiscoverMode  
  TruthValue as cpeExtPsePortDeviceDetected  
  TruthValue as cpeExtPsePortIeeePd  
  BITS as cpeExtPsePortAdditionalStatus  
  Unsigned32 as cpeExtPsePortPwrMax  
  Unsigned32 as cpeExtPsePortPwrAllocated  
  Unsigned32 as cpeExtPsePortPwrAvailable  
  Unsigned32 as cpeExtPsePortPwrConsumption  
  Unsigned32 as cpeExtPsePortMaxPwrDrawn  
  EntPhysicalIndexOrZero as cpeExtPsePortEntPhyIndex  
  TruthValue as cpeExtPsePortPolicingCapable  
  INTEGER as cpeExtPsePortPolicingEnable  
  INTEGER as cpeExtPsePortPolicingAction  
  Unsigned32 as cpeExtPsePortPwrManAlloc  

CpeExtMainPseEntry  
SEQUENCE    
  EntPhysicalIndexOrZero as cpeExtMainPseEntPhyIndex  
  SnmpAdminString as cpeExtMainPseDescr  
  TruthValue as cpeExtMainPsePwrMonitorCapable  

CpeExtPdStatsEntry  
SEQUENCE    
  INTEGER as cpeExtPdStatsClass  
  Unsigned32 as cpeExtPdStatsDeviceCount