CISCO-TAP2-MIB

File: CISCO-TAP2-MIB.mib (42614 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF INET-ADDRESS-MIB
SNMPv2-TC SNMP-FRAMEWORK-MIB IF-MIB
CISCO-SMI

Imported symbols

Counter64 Counter32 Integer32
MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
Unsigned32 MODULE-COMPLIANCE NOTIFICATION-GROUP
OBJECT-GROUP InetAddress InetAddressType
InetPortNumber DateAndTime RowStatus
StorageType TruthValue TEXTUAL-CONVENTION
SnmpAdminString InterfaceIndexOrZero ciscoMgmt

Defined Objects

ciscoTap2MIB 1.3.6.1.4.1.9.9.399
This module manages Cisco's intercept feature. This MIB replaces CISCO-TAP-MIB. This MIB defines a generic stream table that contains fields common to all intercept types. Specific intercept filters are defined in extension MIBs. They are CISCO-IP-TAP-MIB for IP intercepts, CISCO-802-TAP-MIB for IEEE 802 intercepts and CISCO-USER-CONNECTION-TAP-MIB for RADIUS-based user connection intercepts.
MODULE-IDENTITY    

ciscoTap2MIBNotifs 1.3.6.1.4.1.9.9.399.0
OBJECT IDENTIFIER    

ciscoTap2MIBActive 1.3.6.1.4.1.9.9.399.0.1
This Notification is sent when an intercepting router or switch is first capable of intercepting a packet corresponding to a configured data stream. The value of the corresponding cTap2StreamType which identifies the actual intercept stream type is included in this notification. This notification may be generated in conjunction with the intercept application, which is designed to expect the notification to be sent as reliably as possible, e.g., through the use of a finite number of retransmissions until acknowledged, as and when such mechanisms are available; for example, with SNMPv3, this would be an InformRequest. Filter installation can take a long period of time, during which call progress may be delayed.
NOTIFICATION-TYPE    

ciscoTap2MediationTimedOut 1.3.6.1.4.1.9.9.399.0.2
When an intercept is autonomously removed by an intercepting device, such as due to the time specified in cTap2MediationTimeout arriving, the device notifies the manager of the action.
NOTIFICATION-TYPE    
  cTap2MediationStatus  

ciscoTap2MediationDebug 1.3.6.1.4.1.9.9.399.0.3
When there is intervention needed due to some events related to entries configured in cTap2MediationTable, the device notifies the manager of the event. This notification may be generated in conjunction with the intercept application, which is designed to expect the notification to be sent as reliably as possible, e.g., through the use of a finite number of retransmissions until acknowledged, as and when such mechanisms are available; for example, with SNMPv3, this would be an InformRequest.
NOTIFICATION-TYPE    
  cTap2DebugMediationId  
  cTap2DebugMessage  

ciscoTap2StreamDebug 1.3.6.1.4.1.9.9.399.0.4
When there is intervention needed due to some events related to entries configured in cTap2StreamTable, the device notifies the manager of the event. This notification may be generated in conjunction with the intercept application, which is designed to expect the notification to be sent as reliably as possible, e.g., through the use of a finite number of retransmissions until acknowledged, as and when such mechanisms are available; for example, with SNMPv3, this would be an InformRequest.
NOTIFICATION-TYPE    
  cTap2DebugMediationId  
  cTap2DebugStreamId  
  cTap2DebugMessage  

ciscoTap2Switchover 1.3.6.1.4.1.9.9.399.0.5
This notification is sent when there is a redundant (standby) route processor available on the intercepting device and the current active processor is going down causing standby to takeover. Note that this notification may be sent by the intercepting device only when it had a chance to know before it goes down. Mediation device when received this notification should assume that configured intercepts on the intercepting device no longer exist, when the standby processor takes control. This means that the Mediation device should again configure the intercepts.
NOTIFICATION-TYPE    

ciscoTap2MIBObjects 1.3.6.1.4.1.9.9.399.1
OBJECT IDENTIFIER    

cTap2MediationGroup 1.3.6.1.4.1.9.9.399.1.1
OBJECT IDENTIFIER    

cTap2MediationNewIndex 1.3.6.1.4.1.9.9.399.1.1.1
This object contains a value which may be used as an index value for a new cTap2MediationEntry. Whenever read, the agent will change the value to a new non-conflicting value. This is to reduce the probability of errors during creation of new cTap2MediationTable entries.
OBJECT-TYPE    
  Integer32 1..2147483647  

cTap2MediationTable 1.3.6.1.4.1.9.9.399.1.1.2
This table lists the Mediation Devices with which the intercepting device communicates. These may be on the same or different Mediation Devices. This table is written by the Mediation Device, and is always volatile. This is because intercepts may disappear during a restart of the intercepting equipment. Entries are added to this table via cTap2MediationStatus in accordance with the RowStatus convention.
OBJECT-TYPE    
  SEQUENCE OF  
    CTap2MediationEntry

cTap2MediationEntry 1.3.6.1.4.1.9.9.399.1.1.2.1
The entry describes a single session maintained with an application on a Mediation Device.
OBJECT-TYPE    
  CTap2MediationEntry  

cTap2MediationContentId 1.3.6.1.4.1.9.9.399.1.1.2.1.1
cTap2MediationContentId is a session identifier, from the intercept application's perspective, and a content identifier from the Mediation Device's perspective. The Mediation Device is responsible for making sure these are unique, although the SNMP RowStatus row creation process will help by not allowing it to create conflicting entries. Before creating a new entry, a value for this variable may be obtained by reading cTap2MediationNewIndex to reduce the probability of a value collision.
OBJECT-TYPE    
  Integer32 1..2147483647  

cTap2MediationDestAddressType 1.3.6.1.4.1.9.9.399.1.1.2.1.2
The type of cTap2MediationDestAddress.
OBJECT-TYPE    
  InetAddressType  

cTap2MediationDestAddress 1.3.6.1.4.1.9.9.399.1.1.2.1.3
The IP Address of the Mediation Device's network interface to which to direct intercepted traffic.
OBJECT-TYPE    
  InetAddress  

cTap2MediationDestPort 1.3.6.1.4.1.9.9.399.1.1.2.1.4
The port number on the Mediation Device's network interface to which to direct intercepted traffic.
OBJECT-TYPE    
  InetPortNumber  

cTap2MediationSrcInterface 1.3.6.1.4.1.9.9.399.1.1.2.1.5
The interface on the intercepting device from which to transmit intercepted data. If zero, any interface may be used according to normal IP practice.
OBJECT-TYPE    
  InterfaceIndexOrZero  

cTap2MediationRtcpPort 1.3.6.1.4.1.9.9.399.1.1.2.1.6
The port number on the intercepting device to which the Mediation Devices directs RTCP Receiver Reports and Nacks. This object is only relevant when the value of cTap2MediationTransport is 'rtpNack'. This port is assigned by the intercepting device, rather than by the Mediation Device or manager application. The value of this MIB object has no effect before activating the cTap2MediationEntry.
OBJECT-TYPE    
  InetPortNumber  

cTap2MediationDscp 1.3.6.1.4.1.9.9.399.1.1.2.1.7
The Differentiated Services Code Point the intercepting device applies to the IP packets encapsulating the intercepted traffic.
OBJECT-TYPE    
  Ctap2Dscp  

cTap2MediationDataType 1.3.6.1.4.1.9.9.399.1.1.2.1.8
If RTP with Ack/Nack resilience is selected as a transport, the mediation process requires an RTP payload type for data transmissions, and a second RTP payload type for retransmissions. This is the RTP payload type for transmissions. This object is only effective when the value of cTap2MediationTransport is 'rtpNack'.
OBJECT-TYPE    
  Integer32 0..127  

cTap2MediationRetransmitType 1.3.6.1.4.1.9.9.399.1.1.2.1.9
If RTP with Ack/Nack resilience is selected as a transport, the mediation process requires an RTP payload type for data transmissions, and a second RTP payload type for retransmissions. This is the RTP payload type for retransmissions. This object is only effective when the value of cTap2MediationTransport is 'rtpNack'.
OBJECT-TYPE    
  Integer32 0..127  

cTap2MediationTimeout 1.3.6.1.4.1.9.9.399.1.1.2.1.10
The time at which this row and all related Stream Table rows should be automatically removed, and the intercept function cease. Since the initiating network manager may be the only device able to manage a specific intercept or know of its existence, this acts as a fail-safe for the failure or removal of the network manager. The object is only effective when the value of cTap2MediationStatus is 'active'.
OBJECT-TYPE    
  DateAndTime  

cTap2MediationTransport 1.3.6.1.4.1.9.9.399.1.1.2.1.11
The protocol used in transferring intercepted data to the Mediation Device. The following protocols may be supported: udp: PacketCable udp format rtpNack: RTP with Nack resilience tcp: TCP with head of line blocking sctp: SCTP with head of line blocking rtp: Realtime Transport Protocol(RTP) packet format
OBJECT-TYPE    
  INTEGER udp(1), rtpNack(2), tcp(3), sctp(4), rtp(5)  

cTap2MediationNotificationEnable 1.3.6.1.4.1.9.9.399.1.1.2.1.12
This variable controls the generation of any notifications or informs by the MIB agent for this table entry.
OBJECT-TYPE    
  TruthValue  

cTap2MediationStatus 1.3.6.1.4.1.9.9.399.1.1.2.1.13
The status of this conceptual row. This object is used to manage creation, modification and deletion of rows in this table. cTap2MediationTimeout may be modified at any time (even while the row is active). But when the row is active, the other writable objects may not be modified without setting its value to 'notInService'. The entry may not be deleted or deactivated by setting its value to 'destroy' or 'notInService' if there is any associated entry in cTap2StreamTable.
OBJECT-TYPE    
  RowStatus  

cTap2MediationCapabilities 1.3.6.1.4.1.9.9.399.1.1.3
This object displays the device capabilities with respect to certain fields in Mediation Device table. This may be dependent on hardware capabilities, software capabilities. The following values may be supported: ipV4SrcInterface: SNMP ifIndex Value may be used to select the interface (denoted by cTap2MediationSrcInterface) on the intercepting device from which to transmit intercepted data to an IPv4 address Mediation Device. ipV6SrcInterface: SNMP ifIndex Value may be used to select the interface (denoted by cTap2MediationSrcInterface) on the intercepting device from which to transmit intercepted data to an IPv6 address Mediation Device. udp: UDP may be used as transport protocol (denoted by cTap2MediationTransport) in transferring intercepted data to the Mediation Device. rtcpNack: RTP with Nack resilience may be used as transport protocol (denoted by cTap2MediationTransport) in transferring intercepted data to the Mediation Device. tcp: TCP may be used as transport protocol (denoted by cTap2MediationTransport) in transferring intercepted data to the Mediation Device. sctp: SCTP may be used as transport protocol (denoted by cTap2MediationTransport) in transferring intercepted data to the Mediation Device. rtp: RTP may be used as transport protocol (denoted by cTap2MediationTransport) in transferring intercepted data to the Mediation Device.
OBJECT-TYPE    
  BITS ipV4SrcInterface(0), ipV6SrcInterface(1), udp(2), rtpNack(3), tcp(4), sctp(5), rtp(6)  

cTap2StreamGroup 1.3.6.1.4.1.9.9.399.1.2
OBJECT IDENTIFIER    

cTap2StreamTable 1.3.6.1.4.1.9.9.399.1.2.1
The Intercept Stream Table lists the traffic streams to be intercepted. The same data stream may be required by multiple taps, and one might assume that often the intercepted stream is a small subset of the traffic that could be intercepted. The Table consists of generic fields that are independent of the type of intercept. It contains type of the specific filter which is defined in an extension MIB and counters to account for packets intercepted or dropped by the attached filter specification. Note that the Mediation Device must make sure there is only one type of specific filter created with the same indices as that of a row in this table, otherwise the later creations will fail. For example, if there is a row in this table with index 1.2, there can be a corresponding row with the same index either in citapStreamTable, c8tapStreamTable or cuctTapStreamTable, but not all. The first index indicates which Mediation Device the intercepted traffic will be diverted to. The second index permits multiple classifiers to be used together. Entries are added to this table via cTap2StreamStatus in accordance with the RowStatus convention.
OBJECT-TYPE    
  SEQUENCE OF  
    CTap2StreamEntry

cTap2StreamEntry 1.3.6.1.4.1.9.9.399.1.2.1.1
A stream entry indicates a single data stream to be intercepted to a Mediation Device. Many selected data streams may go to the same application interface, and many application interfaces are supported.
OBJECT-TYPE    
  CTap2StreamEntry  

cTap2StreamIndex 1.3.6.1.4.1.9.9.399.1.2.1.1.1
The index of the stream itself.
OBJECT-TYPE    
  Integer32 1..2147483647  

cTap2StreamType 1.3.6.1.4.1.9.9.399.1.2.1.1.2
Identifies the type of intercept filter associated to this generic stream. The following types of streams are supported: ip: The specific filter is an IP filter with same indices as that of this table. The exact filter is a row in citapStreamTable of CISCO-IP-TAP-MIB. mac: The specific filter is a MAC filter with same indices as that of this table. The exact filter is a row in c8tapStreamTable of CISCO-802-TAP-MIB. userConnecton: The specific filter is a user connection filter with same indices as that of this table. The exact filter is a row in cuctTapStreamTable of CISCO-USER-CONNECTION-TAP-MIB. msPdsn: The specific filter is a Mobile Sub connection filter with same indices as that of this table. The exact filter is a row in ccptapStreamTable of CISCO-CDMA-PDSN-TAP-MIB. mobility: The specific filter is a Mobile Subscriber connection filter with same indices as that of this table. The exact filter is a row in cmtapStreamTable of CISCO-MOBILITY-TAP-MIB.
OBJECT-TYPE    
  INTEGER ip(1), mac(2), userConnection(3), msPdsn(4), mobility(5)  

cTap2StreamInterceptEnable 1.3.6.1.4.1.9.9.399.1.2.1.1.3
If 'true', the tap should intercept matching traffic. The value for this object should be set to 'true' only after an additional filter specification has been attached to this stream.
OBJECT-TYPE    
  TruthValue  

cTap2StreamInterceptedPackets 1.3.6.1.4.1.9.9.399.1.2.1.1.4
The number of packets matching this data stream specification that have been intercepted.
OBJECT-TYPE    
  Counter32  

cTap2StreamInterceptDrops 1.3.6.1.4.1.9.9.399.1.2.1.1.5
The number of packets matching this data stream specification that, having been intercepted, were dropped in the lawful intercept process.
OBJECT-TYPE    
  Counter32  

cTap2StreamStatus 1.3.6.1.4.1.9.9.399.1.2.1.1.6
The status of this conceptual row. This object manages creation, modification, and deletion of rows in this table. cTap2StreamInterceptEnable may be modified any time even the value of this entry rowStatus object is 'active'. When other rows must be changed, cTap2StreamStatus must be first set to 'notInService'.
OBJECT-TYPE    
  RowStatus  

cTap2StreamInterceptedHCPackets 1.3.6.1.4.1.9.9.399.1.2.1.1.7
The number of packets matching this data stream specification that have been intercepted. This object is a 64-bit version of cTap2StreamInterceptedPackets.
OBJECT-TYPE    
  Counter64  

cTap2StreamInterceptHCDrops 1.3.6.1.4.1.9.9.399.1.2.1.1.8
The number of packets matching this data stream specification that, having been intercepted, were dropped in the lawful intercept process. This object is a 64-bit version of cTap2StreamInterceptDrops.
OBJECT-TYPE    
  Counter64  

cTap2DebugGroup 1.3.6.1.4.1.9.9.399.1.3
OBJECT IDENTIFIER    

cTap2DebugAge 1.3.6.1.4.1.9.9.399.1.3.1
This object contains the duration in minutes for which an entry in cTap2DebugTable is maintained by the implementing device after which the entry is deleted. The management station also has the option of deleting the entry itself by setting cTap2DebugStatus.
OBJECT-TYPE    
  Integer32 1..2147483647  

cTap2DebugMaxEntries 1.3.6.1.4.1.9.9.399.1.3.2
This object contains the maximum number of debug messages maintained by the implementing device at a time. If this limit is crossed, most recent message will replace the least recent message.
OBJECT-TYPE    
  Integer32 1..2147483647  

cTap2DebugTable 1.3.6.1.4.1.9.9.399.1.3.3
A table that contains Lawful Intercept debug messages generated by the implementing device. This table is used by ciscoTap2MediationDebug and ciscoTap2StreamDebug notifications. An entry in this table contains a debug message which is regarding either a Mediation Device or a intercept stream created by a Mediation Device. The Mediation device is identified by cTap2DebugMediationId whose value is that of cTap2MediationContentId of cTapMediationEntry. The stream is identified by cTap2DebugMediationId and cTap2DebugStreamId whose values are that of cTap2MediationContentId and cTap2StreamIndex of the corresponding cTap2StreamEntry. Note that cTap2DebugStreamId may be zero for an entry, in which case the debug message is regarding a Medation Device. Entries are added to this table via cTap2DebugStatus in accordance with the RowStatus convention.
OBJECT-TYPE    
  SEQUENCE OF  
    CTap2DebugEntry

cTap2DebugEntry 1.3.6.1.4.1.9.9.399.1.3.3.1
A list of the debug messages.
OBJECT-TYPE    
  CTap2DebugEntry  

cTap2DebugIndex 1.3.6.1.4.1.9.9.399.1.3.3.1.1
Index to the debug table.
OBJECT-TYPE    
  Integer32 1..2147483647  

cTap2DebugMediationId 1.3.6.1.4.1.9.9.399.1.3.3.1.2
The value of this object is that of cTap2MediationContentId identifying an entry in cTap2MediationTable. Note this object may contain a value for which an entry in cTap2MediationTable does not exist. This happens when creation of an entry in cTap2MediationTable fails and this debug message conveys more detailed information regarding the failure.
OBJECT-TYPE    
  Unsigned32  

cTap2DebugStreamId 1.3.6.1.4.1.9.9.399.1.3.3.1.3
The value of this object is that of cTap2StreamIndex of an entry in cTap2StreamTable. This object along with cTap2DebugMediationId identifies an entry in cTap2StreamTable. The value of this object may be zero, in which this debug message is regarding a Mediation Device, but not a particular stream. Note this object may contain a value for which an entry in cTap2MediationTable does not exist. This happens when creation of an entry in cTap2StreamTable fails.
OBJECT-TYPE    
  Unsigned32  

cTap2DebugMessage 1.3.6.1.4.1.9.9.399.1.3.3.1.4
A text string contains the debug message.
OBJECT-TYPE    
  SnmpAdminString  

cTap2DebugStatus 1.3.6.1.4.1.9.9.399.1.3.3.1.5
The status of this conceptual row. A row in this table is created by the implementing device. A management station cannot modify any of the objects in this row, except deleting the row by setting this object to 'destroy'.
OBJECT-TYPE    
  RowStatus  

cTap2DebugUserTable 1.3.6.1.4.1.9.9.399.1.3.4
The User Table lists information of all the users configured in the system who are given permission by different Mediation Devices to access Lawful Intercept CLIs. This table will have dependancy on cTap2MediationTable. When entry in cTap2MediationTable is deleted or moved to 'notInService', entries corresponding cTap2MediationContentId in this table will be deleted.
OBJECT-TYPE    
  SEQUENCE OF  
    CTap2DebugUserEntry

cTap2DebugUserEntry 1.3.6.1.4.1.9.9.399.1.3.4.1
A conceptual row in the cTap2DebugUserTable. Each row represents name of user on the router to whom Mediation Device with CCCid represented by cTap2MediationContentId has given access to Lawful Intercept commands and cTap2DebugUserTimeout represents the time when the entry will expire.
OBJECT-TYPE    
  CTap2DebugUserEntry  

cTap2DebugUserName 1.3.6.1.4.1.9.9.399.1.3.4.1.1
A human readable string representing the name of debug user who will have access to Lawful Intercept commands.
OBJECT-TYPE    
  SnmpAdminString SIZE(1..255)  

cTap2DebugUserTimeout 1.3.6.1.4.1.9.9.399.1.3.4.1.2
This object specifies the time at which the row will be removed from the table by the system. The value of this object is only effective when the value of corresponding instance of cTap2DebugUserStatus is 'active'.
OBJECT-TYPE    
  DateAndTime  

cTap2DebugUserStorageType 1.3.6.1.4.1.9.9.399.1.3.4.1.3
This object specifies the storage type of this conceptual row. If it is set to 'nonVolatile', this entry can be saved into non-volatile memory.
OBJECT-TYPE    
  StorageType  

cTap2DebugUserStatus 1.3.6.1.4.1.9.9.399.1.3.4.1.4
The status of this conceptual row. This object manages creation, modification, and deletion of rows in this table. cTap2DebugUserTimeout may be modified any time even when the value of this entry rowStatus object is 'active'.
OBJECT-TYPE    
  RowStatus  

ciscoTap2MIBConform 1.3.6.1.4.1.9.9.399.2
OBJECT IDENTIFIER    

ciscoTap2MIBCompliances 1.3.6.1.4.1.9.9.399.2.1
OBJECT IDENTIFIER    

ciscoTap2MIBCompliance 1.3.6.1.4.1.9.9.399.2.1.1
The compliance statement for entities which implement the Cisco Intercept MIB
MODULE-COMPLIANCE    

ciscoTap2MIBComplianceRev2 1.3.6.1.4.1.9.9.399.2.1.2
The compliance statement for entities which implement the Cisco Intercept MIB. This compliance deprecates ciscoTap2MIBCompliance.
MODULE-COMPLIANCE    

ciscoTap2MIBComplianceRev3 1.3.6.1.4.1.9.9.399.2.1.3
The compliance statement for entities which implement the Cisco Intercept MIB. This compliance deprecates ciscoTap2MIBComplianceRev2.
MODULE-COMPLIANCE    

ciscoTap2MIBGroups 1.3.6.1.4.1.9.9.399.2.2
OBJECT IDENTIFIER    

ciscoTap2MediationComplianceGroup 1.3.6.1.4.1.9.9.399.2.2.1
These objects are necessary for description of the data streams directed to a Mediation Device.
OBJECT-GROUP    

ciscoTap2StreamComplianceGroup 1.3.6.1.4.1.9.9.399.2.2.2
These objects are necessary for a description of the packets to select for interception.
OBJECT-GROUP    

ciscoTap2NotificationGroup 1.3.6.1.4.1.9.9.399.2.2.3
These notifications are used to present status from the intercepting device to the Mediation Device.
NOTIFICATION-GROUP    

ciscoTap2MediationCpbComplianceGroup 1.3.6.1.4.1.9.9.399.2.2.4
These objects are necessary for a description of the mediation device to select for Lawful Intercept.
OBJECT-GROUP    

ciscoTap2DebugComplianceGroup 1.3.6.1.4.1.9.9.399.2.2.5
These objects are necessary for debug information.
OBJECT-GROUP    

ciscoTap2StreamHCStatsGroup 1.3.6.1.4.1.9.9.399.2.2.6
These objects are required for 64 bit version of cTap2StreamInterceptedPackets and cTap2StreamInterceptDrops
OBJECT-GROUP    

ciscoTap2DebugComplianceGroupRev1 1.3.6.1.4.1.9.9.399.2.2.7
These objects are necessary for debug information. This compliance group deprecates ciscoTap2DebugComplianceGroup.
OBJECT-GROUP    

Defined Objects

Ctap2Dscp  
An integer that is in the range of the DiffServ codepoint values.
TEXTUAL-CONVENTION    
  INTEGER 0..63  

CTap2MediationEntry  
SEQUENCE    
  Integer32 as cTap2MediationContentId  
  InetAddressType as cTap2MediationDestAddressType  
  InetAddress as cTap2MediationDestAddress  
  InetPortNumber as cTap2MediationDestPort  
  InterfaceIndexOrZero as cTap2MediationSrcInterface  
  InetPortNumber as cTap2MediationRtcpPort  
  Ctap2Dscp as cTap2MediationDscp  
  Integer32 as cTap2MediationDataType  
  Integer32 as cTap2MediationRetransmitType  
  DateAndTime as cTap2MediationTimeout  
  INTEGER as cTap2MediationTransport  
  TruthValue as cTap2MediationNotificationEnable  
  RowStatus as cTap2MediationStatus  

CTap2StreamEntry  
SEQUENCE    
  Integer32 as cTap2StreamIndex  
  INTEGER as cTap2StreamType  
  TruthValue as cTap2StreamInterceptEnable  
  Counter32 as cTap2StreamInterceptedPackets  
  Counter32 as cTap2StreamInterceptDrops  
  RowStatus as cTap2StreamStatus  
  Counter64 as cTap2StreamInterceptedHCPackets  
  Counter64 as cTap2StreamInterceptHCDrops  

CTap2DebugEntry  
SEQUENCE    
  Integer32 as cTap2DebugIndex  
  Unsigned32 as cTap2DebugMediationId  
  Unsigned32 as cTap2DebugStreamId  
  SnmpAdminString as cTap2DebugMessage  
  RowStatus as cTap2DebugStatus  

CTap2DebugUserEntry  
SEQUENCE    
  SnmpAdminString as cTap2DebugUserName  
  DateAndTime as cTap2DebugUserTimeout  
  StorageType as cTap2DebugUserStorageType  
  RowStatus as cTap2DebugUserStatus