
CISCO-TRUSTSEC-MIB
File:
CISCO-TRUSTSEC-MIB.mib (31557 bytes)
Imported modules
Imported symbols
Defined Objects
| ciscoTrustSecMIB |
1.3.6.1.4.1.9.9.730 |
| This MIB module is for the configuration of a network device on the Cisco Trusted Security (TrustSec) system. TrustSec secures a network fabric by authenticating and authorizing each device connecting to the network, allowing for the encryption, authentication and replay protection of data traffic on a hop by hop basis. Glossary : TrustSec - Cisco Trusted Security EAP-FAST - Extensible Authentication Protocol-Flexible Authentication via Secure Tunneling (RFC 4851) PAC - Protected Access Credential. A credential dynamically downloaded from the Access Server. ACS - Access Control Server SGT - Security Group Tag. A tag identifying its source, assigned to a packet on ingress to a TrustSec cloud, and used to determine security and other policy to be applied to it along its path through the cloud. |
| MODULE-IDENTITY |
|
|
|
| ctsCacheNvStorage |
1.3.6.1.4.1.9.9.730.1.1.2 |
| The location on the device where TrustSec cache files will be created. The location may be specified in :[directory] format, where can be (but not limited to): bootdisk:, disk0:, disk1:. A zero length string for this object indicates that no location has been configured and system will decide the location of TrustSec cache files. |
| OBJECT-TYPE |
|
|
|
| |
SnmpAdminString |
|
|
| ctsCacheClear |
1.3.6.1.4.1.9.9.730.1.1.3 |
| This object allows user to clear the cache files for Cisco Trusted Security feature on this device. When read, this object always returns the value 'none'. 'none' - No operation. 'all' - Clear all the cached information 'authzPolicies' - Clear all the cached authorization policies. 'authzPoliciesPeer' - Clear the cached peer authorization policies. 'authzPoliciesSgt' - Clear the cached SGT authorization policies. 'environmentData' - Clear the cached enviroment-data 'interfaceController' - Clear the cached interface controller data. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(1), all(2), authzPolicies(3), authzPoliciesPeer(4), authzPoliciesSgt(5), environmentData(6), interfaceController(7) |
|
| ctsSgtAssignmentMethod |
1.3.6.1.4.1.9.9.730.1.2.2 |
| This object specifies the method used for assignment of TrustSec SGT for the line cards without TrustSec tagging capability. 'none' - assignment of TrustSec SGT is not enabled. 'ingress' - 'ingress' method is used for the assignment of TrustSec SGT. 'egress' - 'egress' method is used for the assignment of TrustSec SGT. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(1), ingress(2), egress(3) |
|
| ctsDeviceId |
1.3.6.1.4.1.9.9.730.1.3.1 |
| This object allows user to specify the identifier for the device. This identifier and the device password (specified by ctsDevicePassword) are used together by the Cisco Trusted Security feature for authenticating the device. The value of this object must be set in the same PDU as ctsDevicePasswordType and ctsDevicePassword. The object may not be set to a zero length string. The system will return a zero length string for this object either when there is no value configured for this object or TrustSec credentials for the device have been cleared by setting ctsCredentialsClearAll to 'true'. |
| OBJECT-TYPE |
|
|
|
| |
SnmpAdminString |
|
|
| ctsDevicePasswordType |
1.3.6.1.4.1.9.9.730.1.3.2 |
| This object specifies the type of encryption employed to encrypt password in ctsDevicePassword object. Value for this object must be specified as 'clearText', 'typeSix' or 'typeSeven' in order to configure the password in ctsDevicePassword. The value of this object must be set in the same PDU as ctsDevicePassword and ctsDeviceId. When read, value of this object must be 'none' if ctsDevicePassword is a zero length string. The value of this object may not be set to 'none' or 'other'. |
| OBJECT-TYPE |
|
|
|
| |
CtsPasswordEncryptionType |
|
|
| ctsDevicePassword |
1.3.6.1.4.1.9.9.730.1.3.3 |
| This object allows user to specify the password for the device. This password and the device identifier (specified by ctsDeviceId) are used together by the Cisco Trusted Security feature for authenticating the device. The value of this object must be set in the same PDU as ctsDevicePasswordType and ctsDeviceId. The object may not be set to a zero length string. When read, this object always returns the value of a zero-length octet string. |
| OBJECT-TYPE |
|
|
|
| |
SnmpAdminString |
|
|
| ctsKeystoreType |
1.3.6.1.4.1.9.9.730.1.3.4 |
| The type of keystore employed by the device. 'hardwareKeystore' - Keystore functionality is implemented in hardware. 'softwareEmulation' - Keystore functionality is emulated in software. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
hardwareKeystore(1), softwareEmulation(2) |
|
| ctsKeystoreFwAlerts |
1.3.6.1.4.1.9.9.730.1.3.6 |
| The number of hardware keystore alerts occurred. This object is only instantiated when the value of ctsKeystoreType is 'hardwareKeystore'. |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ctsKeystoreFwResets |
1.3.6.1.4.1.9.9.730.1.3.7 |
| The number of times keystore firmware was reset. This object is only instantiated when the value of ctsKeystoreType is 'hardwareKeystore'. |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ctsKeystoreRxTimeouts |
1.3.6.1.4.1.9.9.730.1.3.8 |
| The number of times the system timed out awaiting response from keystore firmware. This object is only instantiated when the value of ctsKeystoreType is 'hardwareKeystore'. |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ctsKeystoreRxBadChecksums |
1.3.6.1.4.1.9.9.730.1.3.9 |
| The number of message fragments the system received from keystore firmware that had bad checksum value. This object is only instantiated when the value of ctsKeystoreType is 'hardwareKeystore'. |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ctsKeystoreRxBadFragmentLengths |
1.3.6.1.4.1.9.9.730.1.3.10 |
| The number of message fragments the system received from keystore firmware that had illegal lengths. This object is only instantiated when the value of ctsKeystoreType is 'hardwareKeystore'. |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ctsKeystoreCorruptions |
1.3.6.1.4.1.9.9.730.1.3.11 |
| The number of times keystore firmware reported detection of one or more corrupted records in the hardware keystore. This object is only instantiated when the value of ctsKeystoreType is 'hardwareKeystore'. |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ctsKeystorePasswordRecordEntry |
1.3.6.1.4.1.9.9.730.1.3.13.1 |
| An entry describing individual password record in the keystore of this device. An entry will be created or deleted from this table when a password record is added or removed from the keystore of this device. |
| OBJECT-TYPE |
|
|
|
| |
CtsKeystorePasswordRecordEntry |
|
|
| ctsKeystorePacRecordEntry |
1.3.6.1.4.1.9.9.730.1.3.14.1 |
| An entry describing individual PAC record in the keystore of this device. An entry will be created or deleted by the system when a PAC record is added or removed from the keystore of this device. |
| OBJECT-TYPE |
|
|
|
| |
CtsKeystorePacRecordEntry |
|
|
| ctsPacInfoEntry |
1.3.6.1.4.1.9.9.730.1.3.15.1 |
| An entry providing management information of a particular PAC record. An entry can only be created dynamically by the system when a new PAC is installed in the keystore. An entry will be deleted from this table when the PAC is removed from the keystore by the system or by the user. |
| OBJECT-TYPE |
|
|
|
| |
CtsPacInfoEntry |
|
|
| ctsPacType |
1.3.6.1.4.1.9.9.730.1.3.15.1.3 |
| This object indicates the type of PAC this entry represents. 'unknown' - Any other type of PAC that is not covered below 'tunnel' - Distributed shared secret between the peer and ACS that is used to establish a secure tunnel and convey the policy of what must and can occur in the tunnel. 'machineAuthentication' - The Machine Authentication PAC contains information in the PAC opaque that identifies the machine. It is meant to be used by a machine when network access is required and no user is logged in. 'userAuthorization' - The User Authorization PAC contains information in the PAC opaque that identifies a user and provides authorization information. The User Authorization PAC is used to provide user information during stateless session resumption so user authentication MAY be skipped. 'posture' - Distributed posture checking and authorization result based on a previous posture validation. A posture PAC can be used to optimize posture validation in the case of frequent revalidations. This result is specific to the posture validation application and may be used outside the contents of EAP-FAST. 'ciscoTrustSec' - A credential dynamically provisioned in phase 0 of EAP-FAST. It is used by Trustsec to set up secure communications with the server. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
unknown(1), tunnel(2), machineAuthentication(3), userAuthorization(4), posture(5), ciscoTrustSec(6) |
|
| ctsPacStatus |
1.3.6.1.4.1.9.9.730.1.3.15.1.6 |
| This object is used to manage the deletion of rows in this table. This object only supports the values 'active' and 'destroy'. Setting this object to 'destroy' deletes this PAC. When read, this object will always return 'active'. |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| ctsCredentialsClearAll |
1.3.6.1.4.1.9.9.730.1.3.16 |
| This object allows user to clear all the PACs and Cisco Trusted Security credentials on the device. Setting the object to 'true' will clear all the PACs and credentials. When read, this object will always return 'false'. |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| ctsEnvDataLastDownloadStatus |
1.3.6.1.4.1.9.9.730.1.4.1 |
| This object indicates the status of the last attempt to download the Environment Data. 'other' - Any other state not covered by below enumerations. 'succeeded' - Environment Data download completed successfully. 'failed' - Environment Data download failed. 'inprogress'- Environment Data download is in progress. 'incomplete'- Environment Data download is incomplete. 'timedout' - Environment Data download did not start and timed out due to no response from the ACS. 'cleared' - Environment Data has been cleared by the user. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
other(1), succeeded(2), failed(3), inprogress(4), incomplete(5), timedout(6), cleared(7) |
|
| ctsEnvDataLastUpdate |
1.3.6.1.4.1.9.9.730.1.4.4 |
| This object indicates the last time Cisco Trusted Security Environment Data was successfully updated from ACS. This object will contain 0-1-1,00:00:00:0 if Environment Data has never been successfully updated from ACS. |
| OBJECT-TYPE |
|
|
|
| |
DateAndTime |
|
|
| ctsEnvDataRefreshInterval |
1.3.6.1.4.1.9.9.730.1.4.5 |
| This object indicates the time interval for which Trusted Security Environment Data is valid. The Trusted Security Environment Data will be refreshed i.e. downloaded from the ACS after this time period has elapsed. |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| ctsEnvDataTimeToRefresh |
1.3.6.1.4.1.9.9.730.1.4.7 |
| This object indicates the time interval after which Trusted Security Environment Data will be refreshed i.e. downloaded from the ACS due to Environment Data expiration or refresh failure. |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| ctsEnvDataSource |
1.3.6.1.4.1.9.9.730.1.4.8 |
| This object indicates the source of current Environment Data installed on the system. 'none' - No Environment Data is currently installed. 'cached' - Environment Data is installed from non-volatile storage on the system. 'downloaded' - Environment Data is downloaded from the ACS. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(1), cached(2), downloaded(3) |
|
| ctsEnvDataAction |
1.3.6.1.4.1.9.9.730.1.4.9 |
| This object allows user to specify the action to be taken for all the Cisco Trusted Security Environment Data on this device. When read, this object always returns the value 'none'. 'none' - No operation. 'refresh' - Refresh all the Trusted Security Environment Data on the device. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(1), refresh(2) |
|
Defined Objects
| CtsKeystorePasswordRecordEntry |
|
| SEQUENCE |
|
|
|
| |
SnmpAdminString as ctsKeystorePasswordRecordName |
|
|
| |
CtsCredentialRecordType as ctsKeystorePasswordRecordType |
|
|
| CtsPacInfoEntry |
|
| SEQUENCE |
|
|
|
| |
CtsAcsAuthorityIdentity as ctsPacAcsAuthId |
|
|
| |
SnmpAdminString as ctsPacAcsDescription |
|
|
| |
INTEGER as ctsPacType |
|
|
| |
DateAndTime as ctsPacExpirationTime |
|
|
| |
Unsigned32 as ctsPacTimeToRefresh |
|
|
| |
RowStatus as ctsPacStatus |
|
|