
CISCO-VLAN-BRIDGING-MIB
File:
CISCO-VLAN-BRIDGING-MIB.mib (6187 bytes)
Imported modules
Imported symbols
Defined Objects
| ciscoVlanBridgingMIB |
1.3.6.1.4.1.9.9.56 |
| A set of managed objects for optimizing access to bridging related data from RFC 1493. This MIB is modeled after portions of RFC 1493, adding VLAN ID based indexing and bitmapped encoding of frequently accessed data. |
| MODULE-IDENTITY |
|
|
|
| cvbStp |
1.3.6.1.4.1.9.9.56.1.1 |
| OBJECT IDENTIFIER |
|
|
|
| cvbStpEntry |
1.3.6.1.4.1.9.9.56.1.1.1.1 |
| Device STP status for specified VLAN. |
| OBJECT-TYPE |
|
|
|
| |
CiscoVlanStpEntry |
|
|
| cvbStpForwardingMap |
1.3.6.1.4.1.9.9.56.1.1.1.1.2 |
| An indication of which ports are forwarding by spanning tree for the specified VLAN. The octet string contains one bit per port on the bridge for the specified VLAN. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. The bit value interpretation is related to RFC 1493 dot1dStpPortState values is as follows: 1 = forwarding 0 = disabled, blocking, listening, learning, broken, or nonexistent |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
SIZE(0..128) |
|
| cvbStpForwardingMap2k |
1.3.6.1.4.1.9.9.56.1.1.1.1.3 |
| An indication of which ports are forwarding by spanning tree for the specified VLAN. The octet string contains one bit per port on the bridge for the specified VLAN. This object has STP status information of up to 2k ports with the port number from 1 to 2048. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. The bit value interpretation is related to RFC 1493 dot1dStpPortState values is as follows: 1 = forwarding 0 = disabled, blocking, listening, learning, broken, or nonexistent. |
| OBJECT-TYPE |
|
|
|
| |
CiscoPortList |
|
|
Defined Objects
| CiscoVlanStpEntry |
|
| SEQUENCE |
|
|
|
| |
OCTET STRING as cvbStpForwardingMap |
|
|
| |
CiscoPortList as cvbStpForwardingMap2k |
|
|