CISCO-WAN-BBIF-ILMI-MIB

File: CISCO-WAN-BBIF-ILMI-MIB.mib (17563 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF ATM-TC-MIB
BASIS-MIB CISCOWAN-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
Counter32 MODULE-COMPLIANCE OBJECT-GROUP
AtmIlmiNetworkPrefix bbIfCnf bbIfCnt
ciscoWan

Defined Objects

bbIfCnfSigILMIGrp 1.3.6.1.4.1.351.110.5.2.6.1.2
OBJECT IDENTIFIER    

bbIfCnfSigILMIGrpTable 1.3.6.1.4.1.351.110.5.2.6.1.2.1
This table contains ILMI configuration parameters for a broadband interface.
OBJECT-TYPE    
  SEQUENCE OF  
    BbIfCnfSigILMIGrpEntry

bbIfCnfSigILMIGrpEntry 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1
An entry for a boradband interface used as a UNI port. Each entry contains ILMI configuration parameters and variables for a broadband interface.
OBJECT-TYPE    
  BbIfCnfSigILMIGrpEntry  

bbIfSigPortNum 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.1
This object refers to the broadband interface. The value for this object is same as value specified in bbIfNum object from bbIfCnfGrpTable.
OBJECT-TYPE    
  Integer32 1..32  

bbIfIlmiEnable 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.2
The logical interface is a generic entity, it can be used as either a virtual trunk, or user port with UNI support. This variable is provided to enable/disable ILMI. ILMI should only be enabled on 'user ports' and not on 'virtual trunks' 1 - disable 2 - enable
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

bbIfSignallingProtocolType 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.3
This will set the signalling protocol other(1) : other noSignalling(2) : noSignalling iLMI(3) : ILMI
OBJECT-TYPE    
  INTEGER other(1), noSignalling(2), iLMI(3)  

bbIfSignallingVpi 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.4
This object specifies the VPI on which signalling cells received.
OBJECT-TYPE    
  Integer32 0..4095  

bbIfSignallingVci 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.5
This object specifies the VPI on which signalling cells received.
OBJECT-TYPE    
  Integer32 0..'ffff'h  

bbIfAddrPrefix 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.6
Network Prefix for the ATM address.
OBJECT-TYPE    
  AtmIlmiNetworkPrefix  

bbIfCustomerId 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.7
This represents the customer Id.
OBJECT-TYPE    
  Integer32  

bbIfProtocolRevNo 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.8
This object represents the protocol revision number.
OBJECT-TYPE    
  Integer32  

bbIfIlmiTrapEnable 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.9
This object is used for enabling/disabling the sending of ILMI traps.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

bbIfMinTrapInterval 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.10
This object specifies the minimum throttling period of notification generation. The notificaton events should be suppressed by the agent until the current throttling period expires.
OBJECT-TYPE    
  Integer32 1..10  

bbIfKeepAlivePollingEnable 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.11
Enable/disable Keep Alive Polling.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

bbIfErrorThresholdN491 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.12
This object specifies Error Threshold (N491) value. The number of keep alive polls that must fail within a window of N491 polls, before the port is placed in the failed state. This attribute is applicable only when bbIfSignallingProtocolType set to iLMI(3).
OBJECT-TYPE    
  Integer32 1..10  

bbIfEventThresholdN492 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.13
This object specifies Error Threshold (N492) value. The number of keep alive polls that must fail within a window of N492 polls, before the port is placed in the failed state. This attribute is applicable only when bbIfSignallingProtocolType set to iLMI(3).
OBJECT-TYPE    
  Integer32 1..10  

bbIfPollingIntervalT491 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.14
This object specifies Polling Interval (T491) value. The T491 value is the number of seconds between each keep alive poll transmitted by port. This attribute is applicable only when bbIfSignallingProtocolType set to iLMI(3).
OBJECT-TYPE    
  INTEGER v1(5), v2(10), v3(15), v4(20), v5(25), v6(30), v7(35), v8(40), v9(45), v10(50), v11(55), v12(60)  

bbIfMinEnquiryIntervalT493 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.15
This object specifies minimum Enquiry Interval(T493) value. The T493 value is the number of seconds between each keep alive poll transmitted by port. This attribute is applicable only when bbIfSignallingProtocolType set to iLMI(3).
OBJECT-TYPE    
  Integer32 1..20  

bbIfAddrRegEnable 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.16
Enable/disable ILMI Address Registration.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

bbIfCntSigILMIGrp 1.3.6.1.4.1.351.110.5.2.6.4.2
OBJECT IDENTIFIER    

bbIfCntSigILMIGrpTable 1.3.6.1.4.1.351.110.5.2.6.4.2.1
This table contains statistics related to ILMI.
OBJECT-TYPE    
  SEQUENCE OF  
    BbIfCntSigILMIGrpEntry

bbIfCntSigILMIGrpEntry 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1
An entry for a boradband interface used as a UNI port.
OBJECT-TYPE    
  BbIfCntSigILMIGrpEntry  

sigCntBbIfNum 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.1
This object refers to the broadband interface. The value for this object is same as value specified in bbIfSigPortNum object from bbIfCnfSigILMIGrpTable.
OBJECT-TYPE    
  Integer32 1..32  

bbIfSnmpPduReceived 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.2
The number of snmp packets received on this logical interface.
OBJECT-TYPE    
  Counter32  

bbIfGetRequestReceived 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.3
The number of get request messages received.
OBJECT-TYPE    
  Counter32  

bbIfGetNextRequestReceived 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.4
The number of get-next messages received.
OBJECT-TYPE    
  Counter32  

bbIfSetRequestReceived 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.5
The number of set messages received.
OBJECT-TYPE    
  Counter32  

bbIfTrapReceived 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.6
The number of traps received.
OBJECT-TYPE    
  Counter32  

bbIfGetResponseReceived 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.7
The number of Keep Alive response messages received.
OBJECT-TYPE    
  Counter32  

bbIfGetResponseTransmitted 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.8
The number of response messages transmitted.
OBJECT-TYPE    
  Counter32  

bbIfGetRequestTransmitted 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.9
The number of Keep Alive get request messages transmitted.
OBJECT-TYPE    
  Counter32  

bbIfTrapTransmitted 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.10
The number of trap messages transmitted.
OBJECT-TYPE    
  Counter32  

bbIfInvalidPDUReceived 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.11
The number of invalid PDUs received.
OBJECT-TYPE    
  Counter32  

bbIfAsn1ParseError 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.12
The number of parse errors on ASN.1.
OBJECT-TYPE    
  Counter32  

bbIfNoSuchNameError 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.13
The number of errors for name not present.
OBJECT-TYPE    
  Counter32  

bbIfTooBigError 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.14
The number of messages received with len > 484.
OBJECT-TYPE    
  Counter32  

bbIfSigCntClrButton 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.15
Writing a value of 2 resets all the counters from bbIfCntSigILMIGrpTable.
OBJECT-TYPE    
  INTEGER noAction(1), resetCounters(2)  

ciscoWanBbifIlmiMIB 1.3.6.1.4.1.351.150.33
The MIB module for ILMI configuration and ILMI statistics for broad band interface ports in PXM1 service module. PXM1 service module is supported in MGX82xx series products. The broadband interface referred to in this mib is for ATM logical ports.
MODULE-IDENTITY    

cwbIlmiMIBConformance 1.3.6.1.4.1.351.150.33.2
OBJECT IDENTIFIER    

cwbIlmiMIBGroups 1.3.6.1.4.1.351.150.33.2.1
OBJECT IDENTIFIER    

cwbIlmiConfGroup 1.3.6.1.4.1.351.150.33.2.1.1
The collection of objects which are used for configuring ILMI on broad band interface ports.
OBJECT-GROUP    

cwbIlmiStatsGroup 1.3.6.1.4.1.351.150.33.2.1.2
The collection of objects containing the ILMI statistics on broad band interface ports.
OBJECT-GROUP    

cwbIlmiMIBCompliances 1.3.6.1.4.1.351.150.33.2.2
OBJECT IDENTIFIER    

cwbIlmiCompliance 1.3.6.1.4.1.351.150.33.2.2.1
The compliance statement for objects related to SRM MIB.
MODULE-COMPLIANCE    

Defined Objects

BbIfCnfSigILMIGrpEntry  
SEQUENCE    
  Integer32 as bbIfSigPortNum  
  INTEGER as bbIfIlmiEnable  
  INTEGER as bbIfSignallingProtocolType  
  Integer32 as bbIfSignallingVpi  
  Integer32 as bbIfSignallingVci  
  AtmIlmiNetworkPrefix as bbIfAddrPrefix  
  Integer32 as bbIfCustomerId  
  Integer32 as bbIfProtocolRevNo  
  INTEGER as bbIfIlmiTrapEnable  
  Integer32 as bbIfMinTrapInterval  
  INTEGER as bbIfKeepAlivePollingEnable  
  Integer32 as bbIfErrorThresholdN491  
  Integer32 as bbIfEventThresholdN492  
  INTEGER as bbIfPollingIntervalT491  
  Integer32 as bbIfMinEnquiryIntervalT493  
  INTEGER as bbIfAddrRegEnable  

BbIfCntSigILMIGrpEntry  
SEQUENCE    
  Integer32 as sigCntBbIfNum  
  Counter32 as bbIfSnmpPduReceived  
  Counter32 as bbIfGetRequestReceived  
  Counter32 as bbIfGetNextRequestReceived  
  Counter32 as bbIfSetRequestReceived  
  Counter32 as bbIfTrapReceived  
  Counter32 as bbIfGetResponseReceived  
  Counter32 as bbIfGetResponseTransmitted  
  Counter32 as bbIfGetRequestTransmitted  
  Counter32 as bbIfTrapTransmitted  
  Counter32 as bbIfInvalidPDUReceived  
  Counter32 as bbIfAsn1ParseError  
  Counter32 as bbIfNoSuchNameError  
  Counter32 as bbIfTooBigError  
  INTEGER as bbIfSigCntClrButton