CISCO-WAN-FR-RSRC-PART-MIB

File: CISCO-WAN-FR-RSRC-PART-MIB.mib (8835 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF BASIS-MIB
CISCOWAN-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
MODULE-COMPLIANCE OBJECT-GROUP frPortCnfResPartGrp
ciscoWan

Defined Objects

frPortCnfResPartGrpTable 1.3.6.1.4.1.351.110.5.1.1.1.5.1
This table is for configuring resource partition parameters. A resource partition is configured on frame relay port. The frame relay port if available in ifTable is identified by ifType values frameRelayService(44) and frForward(158).
OBJECT-TYPE    
  SEQUENCE OF  
    FrPortCnfResPartGrpEntry

frPortCnfResPartGrpEntry 1.3.6.1.4.1.351.110.5.1.1.1.5.1.1
An entry for a resource partition. A resource partition has to be created before connections can be added on a frame relay port.
OBJECT-TYPE    
  FrPortCnfResPartGrpEntry  

frResPartPortNum 1.3.6.1.4.1.351.110.5.1.1.1.5.1.1.1
The value of this object identifies the frame relay port. The value of this object must be same as the value of 'portNum' from frPortCnfPortGrpTable. If frame relay port is available in ifTable, then the value of this object must be same as the ifIndex value of frame relay ports with ifType frameRelayService(44) and frForward(158).
OBJECT-TYPE    
  Integer32 1..2147483647  

frResPartCtrlrNum 1.3.6.1.4.1.351.110.5.1.1.1.5.1.1.2
This object identifies the controller which can be used for accessing the resources. The possible values are : par(1) : Portable Auto Route controller. : This value is applicable in Release 1.x. pnni(2): PNNI Controller. : This value is applicable in Release 2.x. tag(3) : MPLS(Formerly known as Tag Switch)Controller
OBJECT-TYPE    
  INTEGER par(1), pnni(2), tag(3)  

frResPartRowStatus 1.3.6.1.4.1.351.110.5.1.1.1.5.1.1.3
This object is used for adding/deleting/modifying resource partition on a frame relay port. In MGX Release 1.x: To add an entry, this object should be set to add, value for other objects should not be specified. FRSM will choose default values for all other objects. In MGX Release 2.x: To add an entry, this object should be set to add, value for frResPartCtrlrID may be specified. FRSM will choose default values for all other objects. To delete an entry, this object has to be set to del. Currently the value mod is not supported. The resource partition can be deleted only after deleting all the connections (LCNs).
OBJECT-TYPE    
  INTEGER add(1), del(2), mod(3)  

frResPartNumOfLcnAvail 1.3.6.1.4.1.351.110.5.1.1.1.5.1.1.4
This represents number of LCNs available for this controller and this port. FRSM VHS 2CT3 can support LCNs upto 4000. FRSM12 can support LCNs upto 16000.
OBJECT-TYPE    
  Integer32 0..16000  

frResPartDlciLow 1.3.6.1.4.1.351.110.5.1.1.1.5.1.1.5
This represents low end of reserved DLCI.
OBJECT-TYPE    
  Integer32 0..8388607  

frResPartDlciHigh 1.3.6.1.4.1.351.110.5.1.1.1.5.1.1.6
This represents high end of reserved DLCI.
OBJECT-TYPE    
  Integer32 0..8388607  

frResPartIngrPctBW 1.3.6.1.4.1.351.110.5.1.1.1.5.1.1.7
The percentage of total ingress bandwidth reserved.
OBJECT-TYPE    
  Integer32 0..100  

frResPartEgrPctBW 1.3.6.1.4.1.351.110.5.1.1.1.5.1.1.8
The percentage of total egress bandwidth reserved.
OBJECT-TYPE    
  Integer32 0..100  

frResPartCtrlrID 1.3.6.1.4.1.351.110.5.1.1.1.5.1.1.9
This is the controller identifier for the resource patition. The default value is set for PNNI controller. Refer object frResPartCtrlrNum.
OBJECT-TYPE    
  Integer32 1..255  

ciscoWanFrRsrcPartMIB 1.3.6.1.4.1.351.150.45
The MIB module to configure the resource partition on Frame Relay Ports. Terminlogies used: LCN : Logical Connection Number. DLCI : Data Link Connection Identifier. A unique number assigned to a PVC endpoint in a frame relay network. This identifies a particular PVC endpoint within a user's access channel in a frame relay network and has local significance only to that channel.
MODULE-IDENTITY    

cwfRsrcPartMIBConformance 1.3.6.1.4.1.351.150.45.2
OBJECT IDENTIFIER    

cwfRsrcPartMIBCompliances 1.3.6.1.4.1.351.150.45.2.1
OBJECT IDENTIFIER    

ciscoWanFrRsrcPartCompliance 1.3.6.1.4.1.351.150.45.2.1.1
The compliance statement for entities which implement the Frame Relay Resource Partition MIB.
MODULE-COMPLIANCE    

cwfRsrcPartMIBGroups 1.3.6.1.4.1.351.150.45.2.2
OBJECT IDENTIFIER    

ciscoWanFrRsrcPartGroup 1.3.6.1.4.1.351.150.45.2.2.1
A collection of objects providing the Frame Relay Port resource partition configuration information.
OBJECT-GROUP    

Defined Objects

FrPortCnfResPartGrpEntry  
SEQUENCE    
  Integer32 as frResPartPortNum  
  INTEGER as frResPartCtrlrNum  
  INTEGER as frResPartRowStatus  
  Integer32 as frResPartNumOfLcnAvail  
  Integer32 as frResPartDlciLow  
  Integer32 as frResPartDlciHigh  
  Integer32 as frResPartIngrPctBW  
  Integer32 as frResPartEgrPctBW  
  Integer32 as frResPartCtrlrID