COM21-HCXVLAN-MIB

File: COM21-HCXVLAN-MIB.mib (50778 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC COM21-HCX-MIB
COM21-HCXALM-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Integer32 IpAddress Gauge32
TimeTicks DisplayString MacAddress
com21 com21Hcx hcxAlmSeverity
hcxEventLogTime

Defined Objects

com21HcxVlan 1.3.6.1.4.1.1141.2.80
This is the Com21 ComController Vlan MIB module. COM21 Part# 005-0025-00
MODULE-IDENTITY    

com21HcxVlanCtrlGroup 1.3.6.1.4.1.1141.2.81
OBJECT IDENTIFIER    

com21HcxVlanCtrlTable 1.3.6.1.4.1.1141.2.81.1
.
OBJECT-TYPE    
  SEQUENCE OF  
    HcxVlanCtrlEntry

com21HcxVlanCtrlEntry 1.3.6.1.4.1.1141.2.81.1.1
.
OBJECT-TYPE    
  HcxVlanCtrlEntry  

hcxVlanCtrlId 1.3.6.1.4.1.1141.2.81.1.1.1
Specifies the associated Vlan Id.
OBJECT-TYPE    
  INTEGER 1..64  

hcxVlanCtrlName 1.3.6.1.4.1.1141.2.81.1.1.2
contains a descriptive name for the VLAN.
OBJECT-TYPE    
  DisplayString SIZE(32)  

hcxVlanShelf 1.3.6.1.4.1.1141.2.81.1.1.3
Specifies the Shelf to which the Vlan is attached to. Shelf/Slot/CardType/Port will uniquely identify the port to which this Vlan is attached to
OBJECT-TYPE    
  INTEGER 1  

hcxVlanSlot 1.3.6.1.4.1.1141.2.81.1.1.4
Specifies the Slot to which the Vlan is attached to. Shelf/Slot/CardType/Port will uniquely identify the port to which this Vlan is attached to
OBJECT-TYPE    
  Integer32  

hcxVlanCardType 1.3.6.1.4.1.1141.2.81.1.1.5
Specifies the CardType to which the Vlan is attached to. Shelf/Slot/CardType/Port will uniquely identify the port to which this Vlan is attached to
OBJECT-TYPE    
  INTEGER tenBaseT(1), onehundredBaseT(2), oc3(3)  

hcxVlanPort 1.3.6.1.4.1.1141.2.81.1.1.6
Specifies the Port to which the Vlan is attached to. Shelf/Slot/CardType/Port will uniquely identify the port to which this Vlan is attached to
OBJECT-TYPE    
  Integer32  

hcxVlanPriStatus 1.3.6.1.4.1.1141.2.81.1.1.7
lets the user Create a Vlan instance. If already created it lets the user Enable, Disable or Delete the Vlan. Note that the VLAN cannot be Enabled or Disabled until the attributes hcxVlanShelf, hcxVlanSlot, hcxVlanCardType and hcxVlanPort have valid values.
OBJECT-TYPE    
  Com21RowStatus  

hcxVlanSecStatus 1.3.6.1.4.1.1141.2.81.1.1.8
Indicates whether the Vlan is ONLINE or OFFLINE.
OBJECT-TYPE    
  INTEGER online(1), offline(2)  

hcxVlanType 1.3.6.1.4.1.1141.2.81.1.1.9
Specifies whether the Vlan is an internal Vlan or external Vlan. internal Vlan does not allow traffic to leave the Vlan or enter the Vlan. external Vlan allows traffic in both directions. default is external. Note that this attribute is not applicable to 10bT card.
OBJECT-TYPE    
  INTEGER internal(1), external(2)  

hcxVlanPeerToPeerFlag 1.3.6.1.4.1.1141.2.81.1.1.10
Specifies whether STU to STU communication is allowed in the Vlan. If false, STU to STU communication is not allowed and has to go through an external router. If true direct STU to STU communication is allowed without the intervention of an external router. This attribute is not applicable to VLANs on 10bT Card and defaults to a read-only value of true. Default for 100bT/OC3 is false.
OBJECT-TYPE    
  INTEGER true(1), false(2)  

hcxVlanMcastDnstrmRate 1.3.6.1.4.1.1141.2.81.1.1.11
Specifies the downstream multicast rate associated with this Vlan. Defined in bits per second. The multicast rate is ondemand (not guaranteed if enough bandwidth is not available). 0 stops all broadcast forwarding. Default 100000. If a twoWay modem of model CP1000, CP1000A, CP1000B or CP1000C is acquired in the system or a teleRet modem is configured then the multicast rate will be dynamically lowered to not exceed 1000000. Under that condition an attempt to set the rate to greater than 1000000 will be rejected. The rate wil remain at 1000000 even if the condition clears eventually (all the modems of model CP1000, CP1000A, CP1000B or CP1000C get deacquired and no more teleRet modems are configured).
OBJECT-TYPE    
  INTEGER 0..10000000  

hcxVlanIpArpFiltEnbl 1.3.6.1.4.1.1141.2.81.1.1.12
Specifies whether ARP authentication filtering should be enabled on this VLAN. This filter is applicable to 10BT, 100BT, and OC3 cards. It filters traffic in the upstream direction. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuIpArpFiltEnable.
OBJECT-TYPE    
  INTEGER true(1), false(2)  

hcxVlanIpSrcFiltEnbl 1.3.6.1.4.1.1141.2.81.1.1.13
Specifies whether IP source address filtering should be enabled on this VLAN. This filter is applicable to 100BT, and OC3 cards. It is not applicable to 10BT card. It filters traffic in the upstream direction. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuIpSrcFiltEnable.
OBJECT-TYPE    
  INTEGER true(1), false(2)  

hcxVlanIpDstFiltEnbl 1.3.6.1.4.1.1141.2.81.1.1.14
Specifies whether IP destination address filtering should be enabled on this VLAN. This filter is applicable to 100BT, and OC3 cards. It is not applicable to to 10BT card. It filters traffic in the upstream direction. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuIpDstFiltEnable.
OBJECT-TYPE    
  INTEGER true(1), false(2)  

hcxVlanIpBootpReqFiltEnbl 1.3.6.1.4.1.1141.2.81.1.1.15
Specifies whether BOOTP requests, or DHCPDISCOVER, or DHCPREQUEST, or DHCPRELEASE packets should be filtered on this VLAN. This filter is applicable to 100BT, and OC3 cards. It is not applicable to 10BT card. It filters traffic in the downstream direction. Default is true. This filter cannot be controlled per ComPort.
OBJECT-TYPE    
  INTEGER true(1), false(2)  

hcxVlanIpBootpReplyFiltEnbl 1.3.6.1.4.1.1141.2.81.1.1.16
Specifies whether BOOTP replies, or DHCPOFFER, or DHCPACK packets should be filtered on this VLAN. This filter is applicable to 100BT, and OC3 cards. It it not applicable to 10BT card. It filters traffic in the upstream direction. Default is true. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuIpBootpReplyFiltEnbl.
OBJECT-TYPE    
  INTEGER true(1), false(2)  

hcxVlanIpDhcpSnoopFiltEnbl 1.3.6.1.4.1.1141.2.81.1.1.17
Specifies whether DHCP snooping should be enabled on this VLAN. This filter is applicable to 100BT, and OC3 cards. It is not applicable to 10BT card. It snoops traffic in the downstream direction for DHCPACK packets, and in the upstream direction for DHCPDECLINE or DHCPRELEASE packets. Dynamic IP address assigments thus learned are stored in the valid source IP address table (com21HcxStuSrcIpAddrGroup.) Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuIpDhcpSnoopFiltEnbl.
OBJECT-TYPE    
  INTEGER true(1), false(2)  

hcxVlanL2SnapFiltEnbl 1.3.6.1.4.1.1141.2.81.1.1.18
Specifies whether SNAP-encoded IEEE 802.3 packets should be filtered on this VLAN. This filter is applicable to 100BT, and OC3 cards. It is not applicable to 10BT card. It filters traffic in both upstream and downstream directions. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuL2SnapFiltEnbl.
OBJECT-TYPE    
  INTEGER true(1), false(2)  

hcxVlanL2NonSnapFiltEnbl 1.3.6.1.4.1.1141.2.81.1.1.19
Specifies whether non-SNAP-encoded IEEE 802.3 packets should be filtered on this VLAN. This filter is applicable to 10BT, 100BT, and OC3 cards. It filters traffic in both upstream and downstream directions. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuL2NonSnapFiltEnbl.
OBJECT-TYPE    
  INTEGER true(1), false(2)  

hcxVlanL2EnetFiltEnbl 1.3.6.1.4.1.1141.2.81.1.1.20
Specifies whether Ethernet packets should be filtered on this VLAN. This filter is applicable to 100BT and OC3 cards. It is not applicable to 10BT Card. It filters traffic in both upstream and downstream directions. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuL2EnetFiltEnbl.
OBJECT-TYPE    
  INTEGER true(1), false(2)  

hcxVlanL2ArpIpv4FiltEnbl 1.3.6.1.4.1.1141.2.81.1.1.21
Specifies whether ARP packets should be filtered on this VLAN. This filter is applicable to 100BT and OC3 cards. It is not applicable to 10BT card. It filters traffic in both upstream and downstream directions. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuL2ArpIpv4FiltEnbl.
OBJECT-TYPE    
  INTEGER true(1), false(2)  

hcxVlanL2Ipv4FiltEnbl 1.3.6.1.4.1.1141.2.81.1.1.22
Specifies whether IPv4 packets should be filtered on this VLAN. This filter is applicable to 100BT and OC3 cards. It is not applicable to 10BT card. It filters traffic in both upstream and downstream directions. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuL2Ipv4FiltEnbl.
OBJECT-TYPE    
  INTEGER true(1), false(2)  

hcxVlanL2Ipv6FiltEnbl 1.3.6.1.4.1.1141.2.81.1.1.23
Specifies whether IPv6 packets should be filtered on this VLAN. This filter is applicable to 100BT and OC3 cards. It is not applicable to 10BT card. It filters traffic in both upstream and downstream directions. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuL2Ipv6FiltEnbl.
OBJECT-TYPE    
  INTEGER true(1), false(2)  

hcxVlanL2IpxFiltEnbl 1.3.6.1.4.1.1141.2.81.1.1.24
Specifies whether IPX packets should be filtered on this VLAN. This filter is applicable to 100BT and OC3 cards. It is not applicable to 10BT card. It filters traffic in both upstream and downstream directions. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuL2IpxFiltEnbl.
OBJECT-TYPE    
  INTEGER true(1), false(2)  

hcxVlanL2AppletalkFiltEnbl 1.3.6.1.4.1.1141.2.81.1.1.25
Specifies whether AppleTalk packets should be filtered on this VLAN. This filter is applicable to 100BT and OC3 cards. It is not applicable to 10BT card. It filters traffic in both upstream and downstream directions. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuL2AppletalkFiltEnbl.
OBJECT-TYPE    
  INTEGER true(1), false(2)  

hcxVlanL2OthersFiltEnbl 1.3.6.1.4.1.1141.2.81.1.1.26
Specifies whether all layer 2 packets that are none of the above (ARP, IPv4, IPv6, IPX, AppleTalk) should be filtered on this VLAN. This filter is applicable to 100BT and OC3 cards. It is not applicable to 10BT card. It filters traffic in both upstream and downstream directions. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuL2OthersFiltEnbl.
OBJECT-TYPE    
  INTEGER true(1), false(2)  

hcxVlanIpNetbiosFiltEnbl 1.3.6.1.4.1.1141.2.81.1.1.27
Specifies whether NetBIOS-over-IP packets should be filtered on this VLAN. This filter is applicable to 100BT and OC3 cards. It is not applicable to 10BT card. It filters traffic in the upstream direction. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuIpNetbiosFiltEnbl.
OBJECT-TYPE    
  INTEGER true(1), false(2)  

hcxVPNNum 1.3.6.1.4.1.1141.2.81.1.1.28
Specifies the Virtual Private Network to which this Vlan belongs to. If this is not set, it defaults to 0. If a ComPort which belongs to this Vlan has to be configured to support Voice, then a VPN Number has to be defined. Default is 0.
OBJECT-TYPE    
  Integer32  

hcxVlanVpi 1.3.6.1.4.1.1141.2.81.1.1.29
Specifies the VPI to use if this vlan is on an OC3 Port. This attribute is not used if vlan is not on a oc3 Port. Default is 0.
OBJECT-TYPE    
  INTEGER 0..64  

hcxVlanVci 1.3.6.1.4.1.1141.2.81.1.1.30
Specifies the VCI to use if this vlan is on an OC3 Port. This attribute is not used if vlan is not on a oc3 Port. If the hcxVlanVpi value is set to 0, the valid range for this attribute is 38 to 255 Default is 0.
OBJECT-TYPE    
  INTEGER 1..255  

hcxVlanRate 1.3.6.1.4.1.1141.2.81.1.1.31
Specifies the Maximum Rate at which this Vlan can operate. This attribute is used only if the vlan is on an OC3 Port. Default is 10,000,000 bps
OBJECT-TYPE    
  Integer32  

com21HcxVlanStatsGroup 1.3.6.1.4.1.1141.2.82
OBJECT IDENTIFIER    

com21HcxVlanStatsTable 1.3.6.1.4.1.1141.2.82.1
.
OBJECT-TYPE    
  SEQUENCE OF  
    HcxVlanStatsEntry

com21HcxVlanStatsEntry 1.3.6.1.4.1.1141.2.82.1.1
.
OBJECT-TYPE    
  HcxVlanStatsEntry  

hcxVlanStatsId 1.3.6.1.4.1.1141.2.82.1.1.1
Is used as an Index to read the Statistics of a given Vlan.
OBJECT-TYPE    
  INTEGER 1..64  

hcxVlanCurrMcastTxPkts 1.3.6.1.4.1.1141.2.82.1.1.2
contains the number of Multicast net packets sent downstream over the Vlan in the current 15min period.
OBJECT-TYPE    
  Gauge32  

hcxVlanCurrMcastDroppedPkts 1.3.6.1.4.1.1141.2.82.1.1.3
contains the number of Multicast downstream packets dropped in the current 15min period.
OBJECT-TYPE    
  Gauge32  

hcxVlanIpCurrArpFiltStat 1.3.6.1.4.1.1141.2.82.1.1.4
contains the number of ARP packets from this Vlan dropped due to authentication filtering in the current 15minute collection period
OBJECT-TYPE    
  Gauge32  

hcxVlanIpCurrSrcFiltStat 1.3.6.1.4.1.1141.2.82.1.1.5
Contains the number of IP packets from this VLAN dropped due to source address filtering in the current 15 minute collection period.
OBJECT-TYPE    
  Gauge32  

hcxVlanIpCurrDstFiltStat 1.3.6.1.4.1.1141.2.82.1.1.6
Contains the number of IP packets from this VLAN dropped due to destination address filtering in the current 15 minute collection period.
OBJECT-TYPE    
  Gauge32  

hcxVlanIpCurrBootpReqFiltStat 1.3.6.1.4.1.1141.2.82.1.1.7
Contains the number of Bootp Req packets from this VLAN dropped due to filtering in the current 15 minute collection period.
OBJECT-TYPE    
  Gauge32  

hcxVlanIpCurrBootpReplyFiltStat 1.3.6.1.4.1.1141.2.82.1.1.8
Contains the number of Bootp Reply packets from this VLAN dropped due to filtering in the current 15 minute collection period.
OBJECT-TYPE    
  Gauge32  

hcxVlanIpCurrDhcpSnoopFiltStat 1.3.6.1.4.1.1141.2.82.1.1.9
Contains the number of DHCP Ack packets from this VLAN snooped due to filtering in the current 15 minute collection period.
OBJECT-TYPE    
  Gauge32  

hcxVlanPrevMcastTxPkts 1.3.6.1.4.1.1141.2.82.1.1.10
contains the number of Multicast net packets sent downstream over the Vlan in the previous 15min period.
OBJECT-TYPE    
  Gauge32  

hcxVlanPrevMcastDroppedPkts 1.3.6.1.4.1.1141.2.82.1.1.11
contains the number of Multicast downstream packets dropped in the previous 15min period.
OBJECT-TYPE    
  Gauge32  

hcxVlanIpPrevArpFiltStat 1.3.6.1.4.1.1141.2.82.1.1.12
contains the number of ARP packets from this Vlan dropped due to authentication filtering in the previous 15minute collection period
OBJECT-TYPE    
  Gauge32  

hcxVlanIpPrevSrcFiltStat 1.3.6.1.4.1.1141.2.82.1.1.13
Contains the number of IP packets from this VLAN dropped due to source address filtering in the previous 15 minute collection period.
OBJECT-TYPE    
  Gauge32  

hcxVlanIpPrevDstFiltStat 1.3.6.1.4.1.1141.2.82.1.1.14
Contains the number of IP packets from this VLAN dropped due to destination address filtering in the previous 15 minute collection period.
OBJECT-TYPE    
  Gauge32  

hcxVlanIpPrevBootpReqFiltStat 1.3.6.1.4.1.1141.2.82.1.1.15
Contains the number of Bootp Req packets from this VLAN dropped due to filtering in the previous 15 minute collection period.
OBJECT-TYPE    
  Gauge32  

hcxVlanIpPrevBootpReplyFiltStat 1.3.6.1.4.1.1141.2.82.1.1.16
Contains the number of Bootp Reply packets from this VLAN dropped due to filtering in the previous 15 minute collection period.
OBJECT-TYPE    
  Gauge32  

hcxVlanIpPrevDhcpSnoopFiltStat 1.3.6.1.4.1.1141.2.82.1.1.17
Contains the number of DHCP Ack packets from this VLAN snooped due to filtering in the previous 15 minute collection period.
OBJECT-TYPE    
  Gauge32  

hcxVlanClearStats 1.3.6.1.4.1.1141.2.82.1.1.18
This attribute is used to clear the all VLAN statistics counters in this group. This operation is only possible if the hcxStatsControl attribute is set to wrapCurr.
OBJECT-TYPE    
  INTEGER nil(1), clear(2)  

hcxVlanL2CurrSnapFiltStat 1.3.6.1.4.1.1141.2.82.1.1.19
Contains the number of SNAP-encoded IEEE 802.3 packets filtered from this VLAN in the current 15 minute collection period.
OBJECT-TYPE    
  Gauge32  

hcxVlanL2CurrNonSnapFiltStat 1.3.6.1.4.1.1141.2.82.1.1.20
Contains the number of non-SNAP-encoded IEEE 802.3 packets filtered from this VLAN in the current 15 minute collection period.
OBJECT-TYPE    
  Gauge32  

hcxVlanL2CurrEnetFiltStat 1.3.6.1.4.1.1141.2.82.1.1.21
Contains the number of Ethernet packets filtered from this VLAN in the current 15 minute collection period.
OBJECT-TYPE    
  Gauge32  

hcxVlanL2CurrArpIpv4FiltStat 1.3.6.1.4.1.1141.2.82.1.1.22
Contains the number of IPv4 ARP packets filtered from this VLAN in the current 15 minute collection period.
OBJECT-TYPE    
  Gauge32  

hcxVlanL2CurrIpv4FiltStat 1.3.6.1.4.1.1141.2.82.1.1.23
Contains the number of IPv4 packets filtered from this VLAN in the current 15 minute collection period.
OBJECT-TYPE    
  Gauge32  

hcxVlanL2CurrIpv6FiltStat 1.3.6.1.4.1.1141.2.82.1.1.24
Contains the number of IPv6 packets filtered from this VLAN in the current 15 minute collection period.
OBJECT-TYPE    
  Gauge32  

hcxVlanL2CurrIpxFiltStat 1.3.6.1.4.1.1141.2.82.1.1.25
Contains the number of IPX packets filtered from this VLAN in the current 15 minute collection period.
OBJECT-TYPE    
  Gauge32  

hcxVlanL2CurrAppletalkFiltStat 1.3.6.1.4.1.1141.2.82.1.1.26
Contains the number of AppleTalk packets filtered from this VLAN in the current 15 minute collection period.
OBJECT-TYPE    
  Gauge32  

hcxVlanL2CurrOthersFiltStat 1.3.6.1.4.1.1141.2.82.1.1.27
Contains the number of packets that are none of the above type of filters that are filtered from this VLAN in the current 15 minute collection period.
OBJECT-TYPE    
  Gauge32  

hcxVlanIpCurrNetbiosFiltStat 1.3.6.1.4.1.1141.2.82.1.1.28
Contains the number of NetBIOS-over-IP packets that are filtered from this VLAN in the current 15 minute collection period.
OBJECT-TYPE    
  Gauge32  

hcxVlanL2PrevSnapFiltStat 1.3.6.1.4.1.1141.2.82.1.1.29
Contains the number of SNAP-encoded IEEE 802.3 packets filtered from this VLAN in the previous 15 minute collection period.
OBJECT-TYPE    
  Gauge32  

hcxVlanL2PrevNonSnapFiltStat 1.3.6.1.4.1.1141.2.82.1.1.30
Contains the number of non-SNAP-encoded IEEE 802.3 packets filtered from this VLAN in the previous 15 minute collection period.
OBJECT-TYPE    
  Gauge32  

hcxVlanL2PrevEnetFiltStat 1.3.6.1.4.1.1141.2.82.1.1.31
Contains the number of Ethernet packets filtered from this VLAN in the previous 15 minute collection period.
OBJECT-TYPE    
  Gauge32  

hcxVlanL2PrevArpIpv4FiltStat 1.3.6.1.4.1.1141.2.82.1.1.32
Contains the number of IPv4 ARP packets filtered from this VLAN in the previous 15 minute collection period.
OBJECT-TYPE    
  Gauge32  

hcxVlanL2PrevIpv4FiltStat 1.3.6.1.4.1.1141.2.82.1.1.33
Contains the number of IPv4 packets filtered from this VLAN in the previous 15 minute collection period.
OBJECT-TYPE    
  Gauge32  

hcxVlanL2PrevIpv6FiltStat 1.3.6.1.4.1.1141.2.82.1.1.34
Contains the number of IPv6 packets filtered from this VLAN in the previous 15 minute collection period.
OBJECT-TYPE    
  Gauge32  

hcxVlanL2PrevIpxFiltStat 1.3.6.1.4.1.1141.2.82.1.1.35
Contains the number of IPX packets filtered from this VLAN in the previous 15 minute collection period.
OBJECT-TYPE    
  Gauge32  

hcxVlanL2PrevAppletalkFiltStat 1.3.6.1.4.1.1141.2.82.1.1.36
Contains the number of AppleTalk packets filtered from this VLAN in the previous 15 minute collection period.
OBJECT-TYPE    
  Gauge32  

hcxVlanL2PrevOthersFiltStat 1.3.6.1.4.1.1141.2.82.1.1.37
Contains the number of packets that are none of the above type of filters that are filtered from this VLAN in the previous 15 minute collection period.
OBJECT-TYPE    
  Gauge32  

hcxVlanIpPrevNetbiosFiltStat 1.3.6.1.4.1.1141.2.82.1.1.38
Contains the number of NetBIOS-over-IP packets that are filtered from this VLAN in the previous 15 minute collection period.
OBJECT-TYPE    
  Gauge32  

com21HcxOc3VlanStatsGroup 1.3.6.1.4.1.1141.2.83
OBJECT IDENTIFIER    

com21HcxOc3VlanStatsTable 1.3.6.1.4.1.1141.2.83.1
.
OBJECT-TYPE    
  SEQUENCE OF  
    HcxOc3VlanStatsEntry

com21HcxOc3VlanStatsEntry 1.3.6.1.4.1.1141.2.83.1.1
.
OBJECT-TYPE    
  HcxOc3VlanStatsEntry  

hcxOc3VlanStatsVlanId 1.3.6.1.4.1.1141.2.83.1.1.1
Specifies the index into this table. An entry exists for each vlan which is on the Oc3 Port.
OBJECT-TYPE    
  INTEGER 1..64  

hcxOc3VlanStatsCurrTxPkts 1.3.6.1.4.1.1141.2.83.1.1.2
Specifies the number of Pkts. Transmitted on the VPI/VCI value associated with this entry in the current 15-min time period.
OBJECT-TYPE    
  Integer32  

hcxOc3VlanStatsCurrRxPkts 1.3.6.1.4.1.1141.2.83.1.1.3
Specifies the number of Pkts. Received on the VPI/VCI value associated with this entry in the current 15-min time period.
OBJECT-TYPE    
  Integer32  

hcxOc3VlanStatsCurrCrcPkts 1.3.6.1.4.1.1141.2.83.1.1.4
Specifies the number of Pkts. Received with CRC error on the VPI/VCI value associated with this entry in the current 15-min time period.
OBJECT-TYPE    
  Integer32  

hcxOc3VlanStatsPrevTxPkts 1.3.6.1.4.1.1141.2.83.1.1.5
Specifies the number of Pkts. Transmitted on the VPI/VCI value associated with this entry in the previous 15-min time period.
OBJECT-TYPE    
  Integer32  

hcxOc3VlanStatsPrevRxPkts 1.3.6.1.4.1.1141.2.83.1.1.6
Specifies the number of Pkts. Received on the VPI/VCI value associated with this entry in the previous 15-min time period.
OBJECT-TYPE    
  Integer32  

hcxOc3VlanStatsPrevCrcPkts 1.3.6.1.4.1.1141.2.83.1.1.7
Specifies the number of Pkts. Received with CRC error on the VPI/VCI value associated with this entry in the previous 15-min time period.
OBJECT-TYPE    
  Integer32  

hcxOc3VlanStatsClear 1.3.6.1.4.1.1141.2.83.1.1.8
Provides the capability to clear the statistics. Clearing of Statistics is allowed only if hcxStatsControl attribute is set to wrapCurr.
OBJECT-TYPE    
  INTEGER nil(1), clear(2)  

Defined Objects

PrimServiceState  
INTEGER is(1), oos(2)    

Com21RowStatus  
INTEGER active(1), create(2), destroy(3), deactive(4)    

HcxVlanCtrlEntry  
SEQUENCE    
  INTEGER as hcxVlanCtrlId  
  DisplayString as hcxVlanCtrlName  
  INTEGER as hcxVlanShelf  
  INTEGER as hcxVlanSlot  
  INTEGER as hcxVlanCardType  
  INTEGER as hcxVlanPort  
  INTEGER as hcxVlanVpi  
  INTEGER as hcxVlanVci  
  Integer32 as hcxVlanRate  
  Com21RowStatus as hcxVlanPriStatus  
  INTEGER as hcxVlanSecStatus  
  INTEGER as hcxVlanType  
  INTEGER as hcxVlanPeerToPeerFlag  
  INTEGER as hcxVlanMcastDnstrmRate  
  INTEGER as hcxVlanIpArpFiltEnbl  
  INTEGER as hcxVlanIpSrcFiltEnbl  
  INTEGER as hcxVlanIpDstFiltEnbl  
  INTEGER as hcxVlanIpBootpReqFiltEnbl  
  INTEGER as hcxVlanIpBootpReplyFiltEnbl  
  INTEGER as hcxVlanIpDhcpSnoopFiltEnbl  
  INTEGER as hcxVlanL2SnapFiltEnbl  
  INTEGER as hcxVlanL2NonSnapFiltEnbl  
  INTEGER as hcxVlanL2EnetFiltEnbl  
  INTEGER as hcxVlanL2ArpIpv4FiltEnbl  
  INTEGER as hcxVlanL2Ipv4FiltEnbl  
  INTEGER as hcxVlanL2Ipv6FiltEnbl  
  INTEGER as hcxVlanL2IpxFiltEnbl  
  INTEGER as hcxVlanL2AppletalkFiltEnbl  
  INTEGER as hcxVlanL2OthersFiltEnbl  
  INTEGER as hcxVlanIpNetbiosFiltEnbl  
  Integer32 as hcxVPNNum  

HcxVlanStatsEntry  
SEQUENCE    
  INTEGER as hcxVlanStatsId  
  Gauge32 as hcxVlanCurrMcastTxPkts  
  Gauge32 as hcxVlanCurrMcastDroppedPkts  
  Gauge32 as hcxVlanIpCurrArpFiltStat  
  Gauge32 as hcxVlanIpCurrSrcFiltStat  
  Gauge32 as hcxVlanIpCurrDstFiltStat  
  Gauge32 as hcxVlanIpCurrBootpReqFiltStat  
  Gauge32 as hcxVlanIpCurrBootpReplyFiltStat  
  Gauge32 as hcxVlanIpCurrDhcpSnoopFiltStat  
  Gauge32 as hcxVlanL2CurrSnapFiltStat  
  Gauge32 as hcxVlanL2CurrNonSnapFiltStat  
  Gauge32 as hcxVlanL2CurrEnetFiltStat  
  Gauge32 as hcxVlanL2CurrArpIpv4FiltStat  
  Gauge32 as hcxVlanL2CurrIpv4FiltStat  
  Gauge32 as hcxVlanL2CurrIpv6FiltStat  
  Gauge32 as hcxVlanL2CurrIpxFiltStat  
  Gauge32 as hcxVlanL2CurrAppletalkFiltStat  
  Gauge32 as hcxVlanL2CurrOthersFiltStat  
  Gauge32 as hcxVlanIpCurrNetbiosFiltStat  
  Gauge32 as hcxVlanPrevMcastTxPkts  
  Gauge32 as hcxVlanPrevMcastDroppedPkts  
  Gauge32 as hcxVlanIpPrevArpFiltStat  
  Gauge32 as hcxVlanIpPrevSrcFiltStat  
  Gauge32 as hcxVlanIpPrevDstFiltStat  
  Gauge32 as hcxVlanIpPrevBootpReqFiltStat  
  Gauge32 as hcxVlanIpPrevBootpReplyFiltStat  
  Gauge32 as hcxVlanIpPrevDhcpSnoopFiltStat  
  Gauge32 as hcxVlanL2PrevSnapFiltStat  
  Gauge32 as hcxVlanL2PrevNonSnapFiltStat  
  Gauge32 as hcxVlanL2PrevEnetFiltStat  
  Gauge32 as hcxVlanL2PrevArpIpv4FiltStat  
  Gauge32 as hcxVlanL2PrevIpv4FiltStat  
  Gauge32 as hcxVlanL2PrevIpv6FiltStat  
  Gauge32 as hcxVlanL2PrevIpxFiltStat  
  Gauge32 as hcxVlanL2PrevAppletalkFiltStat  
  Gauge32 as hcxVlanL2PrevOthersFiltStat  
  Gauge32 as hcxVlanIpPrevNetbiosFiltStat  
  INTEGER as hcxVlanClearStats  

HcxOc3VlanStatsEntry  
SEQUENCE    
  INTEGER as hcxOc3VlanStatsVlanId  
  Integer32 as hcxOc3VlanStatsCurrTxPkts  
  Integer32 as hcxOc3VlanStatsCurrRxPkts  
  Integer32 as hcxOc3VlanStatsCurrCrcPkts  
  Integer32 as hcxOc3VlanStatsPrevTxPkts  
  Integer32 as hcxOc3VlanStatsPrevRxPkts  
  Integer32 as hcxOc3VlanStatsPrevCrcPkts  
  INTEGER as hcxOc3VlanStatsClear