
| RFC1155-SMI | RFC1213-MIB |
| OBJECT-TYPE | enterprises | Gauge |
| Counter | TimeTicks | IpAddress |
| DisplayString |
| computerm | 1.3.6.1.4.1.2439 | ||
| OBJECT IDENTIFIER | |||
| ctChannelExtensionMIB | 1.3.6.1.4.1.2439.1 | ||
| OBJECT IDENTIFIER | |||
| ctSystem | 1.3.6.1.4.1.2439.1.1 | ||
| OBJECT IDENTIFIER | |||
| ctSysName | 1.3.6.1.4.1.2439.1.1.1 | ||
| System Name. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..255) | ||
| ctSysType | 1.3.6.1.4.1.2439.1.1.2 | ||
| System Type ie. VMC8250, Other etc., | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..80) | ||
| ctSysPrimaryBackupMode | 1.3.6.1.4.1.2439.1.1.3 | ||
| Primary/Backup Mode of the Channel Extender. This is defined in PARAMTAB.DAT | |||
| OBJECT-TYPE | |||
| INTEGER | primary(1), backup(2), primaryOnly(3), unknown(4) | ||
| ctSysAutoStartFlag | 1.3.6.1.4.1.2439.1.1.4 | ||
| State of the auto start flag. Set to 1, enable or online to turn channel extender ONLINE or to 0 disable or offline to turn channel extender OFFLINE Note! Turning OFFLINE will automatically restart the the channel extender with a RESTARTEXEC request. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(0), enabled(1), offline(2), online(3) | ||
| ctSysPowerSupplyMonitorFlag | 1.3.6.1.4.1.2439.1.1.5 | ||
| Whether EXEC is monitoring the power supply or not | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(0), enabled(1) | ||
| ctSysChannelExtenderMode | 1.3.6.1.4.1.2439.1.1.6 | ||
| State of the EXEC i.e. whether it is in diagnostics mode or channel extender mode | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..80) | ||
| ctSysElapsedTime | 1.3.6.1.4.1.2439.1.1.7 | ||
| For how long the system has been running expressed in days, hours, minutes. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..80) | ||
| ctSysStartupTime | 1.3.6.1.4.1.2439.1.1.8 | ||
| The last time EXEC was restarted expressed in Month, Day, Year, Hour, Minute format in the local time zone. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..80) | ||
| ctSysCurrentTime | 1.3.6.1.4.1.2439.1.1.9 | ||
| Current Time expressed in Month,Day,Year,Hour,Minute format in the local time zone. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..80) | ||
| ctSysCustomerName | 1.3.6.1.4.1.2439.1.1.10 | ||
| Textual Identification of the name of the customer | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..255) | ||
| ctSysCustomerServiceNumber | 1.3.6.1.4.1.2439.1.1.11 | ||
| A six(6) digit identification code | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(6) | ||
| ctSysComputermContact | 1.3.6.1.4.1.2439.1.1.12 | ||
| The textual identification of the contact person at Computerm, together with information on how to contact this person. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..255) | ||
| ctSysGMXCommand | 1.3.6.1.4.1.2439.1.1.13 | ||
| Issue select GMX command via SNMP. Supported Commands: SWC, , , channel_number_and_address-Hexadecimal-Mandotory network_address-Hexadecimal-Mandatory num_contiguous-Decimal-Optional | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..255) | ||
| ctInventory | 1.3.6.1.4.1.2439.1.2 | ||
| OBJECT IDENTIFIER | |||
| ctHwTable | 1.3.6.1.4.1.2439.1.2.1 | ||
| Channel Extender Hardware Inventory Table | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| CtHwEntry | |||
| ctHwEntry | 1.3.6.1.4.1.2439.1.2.1.1 | ||
| Information about each hardware module installed | |||
| OBJECT-TYPE | |||
| CtHwEntry | |||
| ctHwSlotIndex | 1.3.6.1.4.1.2439.1.2.1.1.1 | ||
| Slot Index of the hardware board. For system level modules, a specific slot number will be reserved. See the top of this document for details. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctHwBoardIndex | 1.3.6.1.4.1.2439.1.2.1.1.2 | ||
| The board index for a specific slot e.g. ARTIC card and AIB daughter cards. This can also be used to include the extenally connected modules e.g. OC3/DS3 converter, Control Unit etc., | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctHwPortIndex | 1.3.6.1.4.1.2439.1.2.1.1.3 | ||
| Port Number of the board. This can be potentially used for MUX cards and Peripheral devices. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctHwDeviceIndex | 1.3.6.1.4.1.2439.1.2.1.1.4 | ||
| Externally connected devices index. This can be potentially used for peripheral devices and OC3/DS3 converters | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctHwName | 1.3.6.1.4.1.2439.1.2.1.1.5 | ||
| Name of the hardware module | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..255) | ||
| ctHwType | 1.3.6.1.4.1.2439.1.2.1.1.6 | ||
| Type of the hardware module | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..80) | ||
| ctHwSpeed | 1.3.6.1.4.1.2439.1.2.1.1.7 | ||
| Speed of the hardware module. This is the baud rate for comm. modules | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctHwChannelOrLineNumber | 1.3.6.1.4.1.2439.1.2.1.1.8 | ||
| Channel Number of the Adapter/Emulator boards and Line Number of the Comm boards. For other board types, this value will be zero. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctHwPromNumber | 1.3.6.1.4.1.2439.1.2.1.1.9 | ||
| PROM Number of the module | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..255) | ||
| ctHwMNumber | 1.3.6.1.4.1.2439.1.2.1.1.10 | ||
| M-Number of the module | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..255) | ||
| ctHwSerialNumber | 1.3.6.1.4.1.2439.1.2.1.1.11 | ||
| Serial Number of the module | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..255) | ||
| ctHwRevisionLevel | 1.3.6.1.4.1.2439.1.2.1.1.12 | ||
| Revision level of the hardware module | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..255) | ||
| ctHwStatus | 1.3.6.1.4.1.2439.1.2.1.1.13 | ||
| Status of the hardware module | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..80) | ||
| ctSwTable | 1.3.6.1.4.1.2439.1.2.2 | ||
| Channel Extender Software Inventory Table | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| CtSwEntry | |||
| ctSwEntry | 1.3.6.1.4.1.2439.1.2.2.1 | ||
| Information about each software module running. | |||
| OBJECT-TYPE | |||
| CtSwEntry | |||
| ctSwSlotIndex | 1.3.6.1.4.1.2439.1.2.2.1.1 | ||
| Slot Index of the hardware module where this software module is running. For system level modules, a specific slot number will be reserved. See the top of this document for details. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctSwBoardIndex | 1.3.6.1.4.1.2439.1.2.2.1.2 | ||
| The board index for a specific slot e.g. ARTIC card and AIB daughter cards where this software module is running. This can also be used to include the extenally connected modules e.g. OC3/DS3 converter, Control Unit etc., | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctSwPortIndex | 1.3.6.1.4.1.2439.1.2.2.1.3 | ||
| Port Number of the board this software module is running. This can be potentially used for MUX cards | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctSwDeviceIndex | 1.3.6.1.4.1.2439.1.2.2.1.4 | ||
| Externally connected devices index. This can be potentially used for peripheral devices and OC3/DS3 converters | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctSwName | 1.3.6.1.4.1.2439.1.2.2.1.5 | ||
| Name of this software module | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..255) | ||
| ctSwPartNumber | 1.3.6.1.4.1.2439.1.2.2.1.6 | ||
| Software Driver Part Number | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..255) | ||
| ctTopology | 1.3.6.1.4.1.2439.1.3 | ||
| OBJECT IDENTIFIER | |||
| ctTopologyTable | 1.3.6.1.4.1.2439.1.3.1 | ||
| Provides the connectivity information between the current channel extender and all the remote units including their twin units. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| CtTopologyEntry | |||
| ctTopologyEntry | 1.3.6.1.4.1.2439.1.3.1.1 | ||
| Defines each remote connection | |||
| OBJECT-TYPE | |||
| CtTopologyEntry | |||
| ctTopoSlotIndex | 1.3.6.1.4.1.2439.1.3.1.1.1 | ||
| Slot Index of the hardware module this connection is describing. To describe the current unit's twin unit, a specific slot number will be reserved. See the top of this document for details. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctTopoBoardIndex | 1.3.6.1.4.1.2439.1.3.1.1.2 | ||
| The board index of the slot this connection is describing. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctTopoPortIndex | 1.3.6.1.4.1.2439.1.3.1.1.3 | ||
| The port index of the slot this connection is describing. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctTopoDeviceIndex | 1.3.6.1.4.1.2439.1.3.1.1.4 | ||
| Externally connected devices index. This can be potentially used for peripheral devices and OC3/DS3 converters | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctTopoName | 1.3.6.1.4.1.2439.1.3.1.1.5 | ||
| Textual description of this connection. Same as ctHwName. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..255) | ||
| ctTopoRemoteUnit | 1.3.6.1.4.1.2439.1.3.1.1.6 | ||
| Address of the remote channel extender unit. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| ctTopoRemoteTwinUnit | 1.3.6.1.4.1.2439.1.3.1.1.7 | ||
| Address of the remote twin channel extender. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| ctPerformance | 1.3.6.1.4.1.2439.1.4 | ||
| OBJECT IDENTIFIER | |||
| ctPerfResetAllCompressionRatios | 1.3.6.1.4.1.2439.1.4.1 | ||
| This variable is used to reset the compression ratios for all different device types | |||
| OBJECT-TYPE | |||
| INTEGER | reset(1) | ||
| ctPerfResetAllPeakThroughputs | 1.3.6.1.4.1.2439.1.4.2 | ||
| Use this object to reset the peak throughput values (Tx, Rx and Total) associated with this conceptual row. This will start a new data collection and new peak values will be computed. Modifying this object will also reset the ctPerfPeakThroughputStartTime to the current system time | |||
| OBJECT-TYPE | |||
| INTEGER | reset(1) | ||
| ctPerfResetAllReceiveErrorCounts | 1.3.6.1.4.1.2439.1.4.3 | ||
| Use this object to reset the receive error values associated with all the comm. lines. This will start a new data collection. Modifying this object will also reset the ctPerfReceiveErrorCountStartTime to the current system time | |||
| OBJECT-TYPE | |||
| INTEGER | reset(1) | ||
| ctPerfShowFractions | 1.3.6.1.4.1.2439.1.4.4 | ||
| Use this object to display the CPU/Line Utilization and CompressionRatio in 1/100th of a percentage. Example: CompressionRatio: 1.59 Please note that 1.59 cannot be reported to the NMS since SNMP doesn't support Floating Point Arithmetic. The following are the alternatives:: ctPerfShowFractions=Off: Agent Reports 2 (1.59 rounded up) as the CompRatio to the NMS ctPerfShowFractions=On: Agent Reports 159 (1/100th of a percentage) as the CompRatio to the NMS. This will give better precision. If the NMS has the capability to devide by 100, using this method, the actual CompRatio of 1.59 can be displayed by the NMS. By Default, ctPerfShowFractions is OFF | |||
| OBJECT-TYPE | |||
| INTEGER | off(0), on(1) | ||
| ctPerfControlTable | 1.3.6.1.4.1.2439.1.4.5 | ||
| Provides the user modifiable values for performance data | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| CtPerfControlEntry | |||
| ctPerfControlEntry | 1.3.6.1.4.1.2439.1.4.5.1 | ||
| Provides the objects to configure performance data collection | |||
| OBJECT-TYPE | |||
| CtPerfControlEntry | |||
| ctPerfControlSlotIndex | 1.3.6.1.4.1.2439.1.4.5.1.1 | ||
| Slot index | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctPerfControlBoardIndex | 1.3.6.1.4.1.2439.1.4.5.1.2 | ||
| Board Index | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctPerfControlPortIndex | 1.3.6.1.4.1.2439.1.4.5.1.3 | ||
| Port Index | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctPerfControlDeviceIndex | 1.3.6.1.4.1.2439.1.4.5.1.4 | ||
| Externally connected devices index. This can be potentially used for peripheral devices and OC3/DS3 converters | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctPerfControlName | 1.3.6.1.4.1.2439.1.4.5.1.5 | ||
| Same as the ctHwName | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..255) | ||
| ctPerfControlInterval | 1.3.6.1.4.1.2439.1.4.5.1.6 | ||
| Data collection interval specified in seconds | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctPerfControlUtilThreshold | 1.3.6.1.4.1.2439.1.4.5.1.7 | ||
| Utilization threshold value | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctPerformanceTable | 1.3.6.1.4.1.2439.1.4.6 | ||
| Performance data for the channel extender units | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| CtPerformanceEntry | |||
| ctPerformanceEntry | 1.3.6.1.4.1.2439.1.4.6.1 | ||
| Provides the performance data for different hardware modules of a Channel Extender | |||
| OBJECT-TYPE | |||
| CtPerformanceEntry | |||
| ctPerfSlotIndex | 1.3.6.1.4.1.2439.1.4.6.1.1 | ||
| Slot index of the collection | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctPerfBoardIndex | 1.3.6.1.4.1.2439.1.4.6.1.2 | ||
| Board index for a specific slot | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctPerfPortIndex | 1.3.6.1.4.1.2439.1.4.6.1.3 | ||
| Port index of a board | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctPerfDeviceIndex | 1.3.6.1.4.1.2439.1.4.6.1.4 | ||
| Externally connected devices index. This can be potentially used for peripheral devices and OC3/DS3 converters | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctPerfName | 1.3.6.1.4.1.2439.1.4.6.1.5 | ||
| Same as the ctHwName | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..255) | ||
| ctPerfChannelOrLineNumber | 1.3.6.1.4.1.2439.1.4.6.1.6 | ||
| Same as the ctHwChannelOrLineNumber | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctPerfType | 1.3.6.1.4.1.2439.1.4.6.1.7 | ||
| Same as the ctHwType | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..80) | ||
| ctPerfStatus | 1.3.6.1.4.1.2439.1.4.6.1.8 | ||
| Same as the ctHwStatus | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..80) | ||
| ctPerfTxThroughput | 1.3.6.1.4.1.2439.1.4.6.1.9 | ||
| Transmit thorughput specified in bits/second (including any overhead bits). This value is defined for communication adapters only and calculated for each pyhsical line. If a physical line is using multiple virtual lines, this value accounts for all the virtual lines | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctPerfRxThroughput | 1.3.6.1.4.1.2439.1.4.6.1.10 | ||
| Receive thorughput specified in bits/second (including any overhead bits). This value is defined for communication adapters only and calculated for each pyhsical line. If a physical line is using multiple virtual lines, this value accounts for all the virtual lines | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctPerfTotalThroughput | 1.3.6.1.4.1.2439.1.4.6.1.11 | ||
| Total thorughput specified in uncompressed bytes/second. This value is defined for adapters, emulators, compression boards, and for each device assigned to a particular adapter or emulator | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctPerfPeakTxThroughput | 1.3.6.1.4.1.2439.1.4.6.1.12 | ||
| Peak Transmit thorughput specified in bits/second (including any overhead bits). This value is defined for communication adapters only and calculated for each pyhsical line. If a physical line is using multiple virtual lines, this value accounts for all the virtual lines. ctPerfPeakThroughputStartTime and ctPerfPeakTxThrouthputTime identify start time of the data sampling and the actual the time when the peak value was noted. User can reset the current peak value and start new data collection by using the ctPerfResetPeakThroughput mib object | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctPerfPeakTxThroughputTime | 1.3.6.1.4.1.2439.1.4.6.1.13 | ||
| Time stamp when the peak transmit throuput value was noted. Time is specified in the local time zone | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..80) | ||
| ctPerfPeakRxThroughput | 1.3.6.1.4.1.2439.1.4.6.1.14 | ||
| Peak receive thorughput specified in bits/second (including any overhead bits). This value is defined for communication adapters only and calculated for each pyhsical line. If a physical line is using multiple virtual lines, this value accounts for all the virtual lines. ctPerfPeakThroughputStartTime and ctPerfPeakRxThrouthputTime identify start time of the data sampling and the actual the time when the peak value was noted. User can reset the current peak value and start new data collection by using the ctPerfResetPeakThroughput mib object | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctPerfPeakRxThroughputTime | 1.3.6.1.4.1.2439.1.4.6.1.15 | ||
| Time stamp when the peak receive throuput value was noted. Time is specified in the local time zone | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..80) | ||
| ctPerfPeakTotalThroughput | 1.3.6.1.4.1.2439.1.4.6.1.16 | ||
| Peak total thorughput specified in uncompressed bytes/second. This value is defined for adapters, emulators, compression board and for all the devices assigned to each adaptor or emulator. ctPerfPeakThroughputStartTime and ctPerfPeakTotalThrouthputTime identify start time of the data sampling and the actual the time when the peak value was noted. User can reset the current peak value and start new data collection by using the ctPerfResetPeakThroughput mib object | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctPerfPeakTotalThroughputTime | 1.3.6.1.4.1.2439.1.4.6.1.17 | ||
| Time stamp when the peak total throughput value was noted. Time is specified in the local time zone. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..80) | ||
| ctPerfPeakThroughputStartTime | 1.3.6.1.4.1.2439.1.4.6.1.18 | ||
| Time stamp when the data sampling was started for determining peak values. Time is specified in the local time zone. Whenever user resets the peak values by setting the ctPerfResetPeakThroughput, this object will be updated with the current system time | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..80) | ||
| ctPerfResetPeakThroughput | 1.3.6.1.4.1.2439.1.4.6.1.19 | ||
| Use this object to reset the peak throughput values (Tx, Rx and Total) associated with this conceptual row. This will start a new data collection and new peak values will be computed. Modifying this object will also reset the ctPerfPeakThroughputStartTime to the current system time | |||
| OBJECT-TYPE | |||
| INTEGER | reset(1) | ||
| ctPerfTxUtilization | 1.3.6.1.4.1.2439.1.4.6.1.20 | ||
| This value is defined only for the communication adapters and computed for each physical line. This value is expressed as the transmit bits/second as a percentage of the line data rate. This value can be between 0 and 100 inclusive | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctPerfRxUtilization | 1.3.6.1.4.1.2439.1.4.6.1.21 | ||
| This value is defined only for the communication adapters and computed for each physical line. This value is expressed as the receive bits/second as a percentage of the line data rate. This value can be between 0 and 100 inclusive | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctPerfCPUUtilization | 1.3.6.1.4.1.2439.1.4.6.1.22 | ||
| This value is defined only for adapters, emulators, compression board and mother board. This value represents the extent the CPU on the specified board is busy servicing all of the hardware and software components installed in the system. This value can be between 0 and 100 inclusive | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctPerfDataRate | 1.3.6.1.4.1.2439.1.4.6.1.23 | ||
| The data rate associated with the communication line and is expressed in bits/second. For SDLC lines, although both Tx and Rx data rates are available, only Tx clock will be used to represent the data rate. For ATM and LAN cards, the data rate values specified in the PARAMTAB.DAT will be provided | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctPerfReceiveErrorCount | 1.3.6.1.4.1.2439.1.4.6.1.24 | ||
| This value is defined only for communication adapters and shown as the number of errors received over the sampling interval(default =60 secs). Ideally this value will be calculated using a rolling 60 second window to allow errors to be displayed as they occur | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctPerfReceiveErrorCountStartTime | 1.3.6.1.4.1.2439.1.4.6.1.25 | ||
| This is the system time when the last reset Receive Errors command was received | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..80) | ||
| ctPerfResetReceiveErrorCount | 1.3.6.1.4.1.2439.1.4.6.1.26 | ||
| This variable is used to reset the Receive Erors associated with this conceptual row. Resetting will start a new data collection. This will also set the ctPerfReceiveErrorCountStartTime to current time. | |||
| OBJECT-TYPE | |||
| INTEGER | reset(1) | ||
| ctPerfCommLineDelay | 1.3.6.1.4.1.2439.1.4.6.1.27 | ||
| Communication line delay expressed in milli seconds. Valid only for Comm. adapters | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctPerfCompressionRatio | 1.3.6.1.4.1.2439.1.4.6.1.28 | ||
| Compression ratio is defined for the compression board, for each channel adapter, and emulator and for each device assigned to the adapter and emulator. This is a cumulative value calculated from the time when the customer sends a reset compression ratio using the ctPerfResetCompre -ssionRatio object. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctPerfCompressionRatioStartTime | 1.3.6.1.4.1.2439.1.4.6.1.29 | ||
| This is the system time when the last reset compression ration command was received | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..80) | ||
| ctPerfResetCompressionRatio | 1.3.6.1.4.1.2439.1.4.6.1.30 | ||
| This variable is used to reset the compression ratio associated with this conceptual row | |||
| OBJECT-TYPE | |||
| INTEGER | reset(1) | ||
| ctPerfDeviceTxUncompressedCounts | 1.3.6.1.4.1.2439.1.4.6.1.31 | ||
| This is the transmit uncompressed byte count for a device Note: When ctPerfShowFractions is OFF this value is expressed in kilobytes | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctPerfDeviceTxCompressedCounts | 1.3.6.1.4.1.2439.1.4.6.1.32 | ||
| This is the transmit compressed byte count for a device Note: When ctPerfShowFractions is OFF this value is expressed in kilobytes | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctPerfDeviceRxUncompressedCounts | 1.3.6.1.4.1.2439.1.4.6.1.33 | ||
| This is the receive uncompressed byte count for a device Note: When ctPerfShowFractions is OFF this value is expressed in kilobytes | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctPerfDeviceRxCompressedCounts | 1.3.6.1.4.1.2439.1.4.6.1.34 | ||
| This is the receive compressed byte count for a device Note: When ctPerfShowFractions is OFF this value is expressed in kilobytes | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctPerfDeviceCountsStartTime | 1.3.6.1.4.1.2439.1.4.6.1.35 | ||
| This is the system time when the last reset device counts command was received | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..80) | ||
| ctPerfResetDeviceCounts | 1.3.6.1.4.1.2439.1.4.6.1.36 | ||
| This variable is used to reset the transmit, receive, compressed and uncompressed counts for a device | |||
| OBJECT-TYPE | |||
| INTEGER | reset(1) | ||
| ctPerfTxDeviceCompressionRatio | 1.3.6.1.4.1.2439.1.4.6.1.37 | ||
| This is the transmit compression ratio for a device | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctPerfRxDeviceCompressionRatio | 1.3.6.1.4.1.2439.1.4.6.1.38 | ||
| This is the receive compression ratio for a device | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctPerfResetAllDeviceCounts | 1.3.6.1.4.1.2439.1.4.7 | ||
| This variable is used to reset the transmit, receive, compressed and uncompressed byte counts of all devices back to zero | |||
| OBJECT-TYPE | |||
| INTEGER | reset(1) | ||
| ctDiagnostics | 1.3.6.1.4.1.2439.1.5 | ||
| OBJECT IDENTIFIER | |||
| ctDiagnosticsTable | 1.3.6.1.4.1.2439.1.5.1 | ||
| Diagnostics information for the Channel Extenders | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| CtDiagnosticsEntry | |||
| ctDiagnosticsEntry | 1.3.6.1.4.1.2439.1.5.1.1 | ||
| Diagnostics information for each hardware module of the Channel Extender. | |||
| OBJECT-TYPE | |||
| CtDiagnosticsEntry | |||
| ctDiagSlotIndex | 1.3.6.1.4.1.2439.1.5.1.1.1 | ||
| Slot index of the hardware module where the diagnostics test is being performed | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctDiagBoardIndex | 1.3.6.1.4.1.2439.1.5.1.1.2 | ||
| Board index of the slot where the diagnostics test is being performed. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctDiagPortIndex | 1.3.6.1.4.1.2439.1.5.1.1.3 | ||
| Port index of the board where the diagnostics test is being performed. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctPerfDeviceIndex2 | 1.3.6.1.4.1.2439.1.5.1.1.4 | ||
| Externally connected devices index. This can be potentially used for peripheral devices and OC3/DS3 converters | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctDiagName | 1.3.6.1.4.1.2439.1.5.1.1.5 | ||
| Same as the ctHwName object | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..255) | ||
| ctDiagType | 1.3.6.1.4.1.2439.1.5.1.1.6 | ||
| Same as the ctHwType | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..80) | ||
| ctDiagTestNumber | 1.3.6.1.4.1.2439.1.5.1.1.7 | ||
| Current Test Number | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..80) | ||
| ctDiagPassCount | 1.3.6.1.4.1.2439.1.5.1.1.8 | ||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..80) | ||
| ctDiagStatus | 1.3.6.1.4.1.2439.1.5.1.1.9 | ||
| Same as the ctHwStatus | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..80) | ||
| ctPowerSupply | 1.3.6.1.4.1.2439.1.6 | ||
| OBJECT IDENTIFIER | |||
| ctPsA-Status | 1.3.6.1.4.1.2439.1.6.1 | ||
| OBJECT-TYPE | |||
| INTEGER | ac-Failed-dc-Failed(0), ac-Good-dc-Failed(1), ac-Failed-dc-Good(2), ac-Good-dc-Good(3), n-a(5) | ||
| ctPsB-Status | 1.3.6.1.4.1.2439.1.6.2 | ||
| OBJECT-TYPE | |||
| INTEGER | ac-Failed-dc-Failed(0), ac-Good-dc-Failed(1), ac-Failed-dc-Good(2), ac-Good-dc-Good(3), n-a(5) | ||
| ctPsAlertFlag | 1.3.6.1.4.1.2439.1.6.3 | ||
| OBJECT-TYPE | |||
| INTEGER | |||
| ctPsFirstFailTime | 1.3.6.1.4.1.2439.1.6.4 | ||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..80) | ||
| ctPsA-ACErrors | 1.3.6.1.4.1.2439.1.6.5 | ||
| OBJECT-TYPE | |||
| Counter | |||
| ctPsA-DCErrors | 1.3.6.1.4.1.2439.1.6.6 | ||
| OBJECT-TYPE | |||
| Counter | |||
| ctPsB-ACErrors | 1.3.6.1.4.1.2439.1.6.7 | ||
| OBJECT-TYPE | |||
| Counter | |||
| ctPsB-DCErrors | 1.3.6.1.4.1.2439.1.6.8 | ||
| OBJECT-TYPE | |||
| Counter | |||
| ctTraps | 1.3.6.1.4.1.2439.1.7 | ||
| OBJECT IDENTIFIER | |||
| ctAbortTable | 1.3.6.1.4.1.2439.1.7.1 | ||
| Channel Extender Aborts History Table | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| CtAbortEntry | |||
| ctAbortEntry | 1.3.6.1.4.1.2439.1.7.1.1 | ||
| Channel Extender Aborts History Table Entry | |||
| OBJECT-TYPE | |||
| CtAbortEntry | |||
| ctAbortIndex | 1.3.6.1.4.1.2439.1.7.1.1.1 | ||
| This index uniquely identifies an entry in the Abort Table. Although the maximum number of entries in the table is limited to some pre-determined value (20 in phase I), ctAbortIndex can assume values in the 1..65535 range | |||
| OBJECT-TYPE | |||
| INTEGER | 1..65535 | ||
| ctAbortAlertTimeStamp | 1.3.6.1.4.1.2439.1.7.1.1.2 | ||
| Trap occurence time expressed in local time zone | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..80) | ||
| ctAbortAlertShortDescription | 1.3.6.1.4.1.2439.1.7.1.1.3 | ||
| Short Description of the abort or alert being described | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..255) | ||
| ctAbortAlertDescription | 1.3.6.1.4.1.2439.1.7.1.1.4 | ||
| Full description of the abort or alert being described | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..255) | ||
| CtHwEntry | |||
| SEQUENCE | |||
| INTEGER as ctHwSlotIndex | |||
| INTEGER as ctHwBoardIndex | |||
| INTEGER as ctHwPortIndex | |||
| INTEGER as ctHwDeviceIndex | |||
| DisplayString as ctHwName | |||
| DisplayString as ctHwType | |||
| INTEGER as ctHwSpeed | |||
| INTEGER as ctHwChannelOrLineNumber | |||
| DisplayString as ctHwPromNumber | |||
| DisplayString as ctHwMNumber | |||
| DisplayString as ctHwSerialNumber | |||
| DisplayString as ctHwRevisionLevel | |||
| DisplayString as ctHwStatus | |||
| CtSwEntry | |||
| SEQUENCE | |||
| INTEGER as ctSwSlotIndex | |||
| INTEGER as ctSwBoardIndex | |||
| INTEGER as ctSwPortIndex | |||
| INTEGER as ctSwBoardIndex | |||
| DisplayString as ctSwName | |||
| DisplayString as ctSwPartNumber | |||
| CtTopologyEntry | |||
| SEQUENCE | |||
| INTEGER as ctTopoSlotIndex | |||
| INTEGER as ctTopoBoardIndex | |||
| INTEGER as ctTopoPortIndex | |||
| INTEGER as ctTopoDeviceIndex | |||
| DisplayString as ctTopoName | |||
| IpAddress as ctTopoRemoteUnit | |||
| INTEGER as ctTopoRemoteTwinUnit | |||
| CtPerfControlEntry | |||
| SEQUENCE | |||
| INTEGER as ctPerfControlSlotIndex | |||
| INTEGER as ctPerfControlBoardIndex | |||
| INTEGER as ctPerfControlPortIndex | |||
| INTEGER as ctPerfControlDeviceIndex | |||
| DisplayString as ctPerfControlName | |||
| INTEGER as ctPerfControlInterval | |||
| INTEGER as ctPerfControlUtilThreshold | |||
| CtPerformanceEntry | |||
| SEQUENCE | |||
| INTEGER as ctPerfSlotIndex | |||
| INTEGER as ctPerfBoardIndex | |||
| INTEGER as ctPerfPortIndex | |||
| INTEGER as ctPerfDeviceIndex | |||
| DisplayString as ctPerfName | |||
| INTEGER as ctPerfChannelOrLineNumber | |||
| DisplayString as ctPerfType | |||
| DisplayString as ctPerfStatus | |||
| INTEGER as ctPerfTxThroughput | |||
| INTEGER as ctPerfRxThroughput | |||
| INTEGER as ctPerfTotalThroughput | |||
| INTEGER as ctPerfPeakTxThroughput | |||
| DisplayString as ctPerfPeakTxThroughputTime | |||
| INTEGER as ctPerfPeakRxThroughput | |||
| DisplayString as ctPerfPeakRxThroughputTime | |||
| INTEGER as ctPerfPeakTotalThroughput | |||
| DisplayString as ctPerfPeakTotalThroughputTime | |||
| DisplayString as ctPerfPeakThroughputStartTime | |||
| INTEGER as ctPerfResetPeakThroughput | |||
| INTEGER as ctPerfTxUtilization | |||
| INTEGER as ctPerfRxUtilization | |||
| INTEGER as ctPerfCPUUtilization | |||
| INTEGER as ctPerfDataRate | |||
| INTEGER as ctPerfReceiveErrorCount | |||
| DisplayString as ctPerfReceiveErrorCountStartTime | |||
| INTEGER as ctPerfResetReceiveErrorCount | |||
| INTEGER as ctPerfCommLineDelay | |||
| INTEGER as ctPerfCompressionRatio | |||
| INTEGER as ctPerfCompressionRatioStartTime | |||
| INTEGER as ctPerfResetCompressionRatio | |||
| INTEGER as ctPerfDeviceTxUncompressedCounts | |||
| INTEGER as ctPerfDeviceTxCompressedCounts | |||
| INTEGER as ctPerfDeviceRxUncompressedCounts | |||
| INTEGER as ctPerfDevcieRxCompressedCounts | |||
| INTEGER as ctPerfDeviceCountsStartTime | |||
| INTEGER as ctPerfResetDeviceCounts | |||
| INTEGER as ctPerfDeviceTxCompressionRatio | |||
| INTEGER as ctPerfDeviceRxCompressionRatio | |||
| CtDiagnosticsEntry | |||
| SEQUENCE | |||
| INTEGER as ctDiagSlotIndex | |||
| INTEGER as ctDiagBoardIndex | |||
| INTEGER as ctDiagPortIndex | |||
| INTEGER as ctDiagDeviceIndex | |||
| DisplayString as ctDiagName | |||
| DisplayString as ctDiagType | |||
| DisplayString as ctDiagTestNumber | |||
| DisplayString as ctDiagPassCount | |||
| DisplayString as ctDiagStatus | |||
| CtAbortEntry | |||
| SEQUENCE | |||
| INTEGER as ctAbortIndex | |||
| DisplayString as ctAbortAlertTimeStamp | |||
| DisplayString as ctAbortAlertShortDescription | |||
| DisplayString as ctAbortAlertDescription | |||