COPPER-MOUNTAIN-NETWORKS-DSL-MIB

File: COPPER-MOUNTAIN-NETWORKS-DSL-MIB.mib (332458 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB
RFC-1215

Imported symbols

enterprises TimeTicks Counter
IpAddress Gauge OBJECT-TYPE
ifIndex DisplayString TRAP-TYPE

Defined Objects

coppermountain 1.3.6.1.4.1.1996
OBJECT IDENTIFIER    

cmRegistry 1.3.6.1.4.1.1996.1
OBJECT IDENTIFIER    

cmLoginError 1.3.6.1.4.1.1996.1
Indicates an operator tried and failed to log into the system. If this trap has a severity of 'information,' it can potentially clear an alarm in the system. When such a trap is received by the manager, the operator can query the cmTrapCriticalCount, cmTrapMajorAlarmCount, and cmTrapMinorAlarmCount objects to get the current system alarm status.
TRAP-TYPE    
  cmTrapEventLogText  
  cmActiveSessionOperatorName  
  cmActiveSessionIpAddress  
  cmActiveSessionContext  
  cmTrapEventLogSeverity  
  cmTrapEventLogType  
  cmTrapEventLogObjectClass  
  cmTrapEventLogClassId  
  cmTrapEventLogSeqNum  
  cmTrapEventLogTimeTag  

cmCE120Platform 1.3.6.1.4.1.1996.1.1
OBJECT IDENTIFIER    

cmCE150Platform 1.3.6.1.4.1.1996.1.2
OBJECT IDENTIFIER    

cmCE200Platform 1.3.6.1.4.1.1996.1.3
OBJECT IDENTIFIER    

cmLoginOK 1.3.6.1.4.1.1996.2
This trap indicates that an operator has successfully logged into the system. If this trap has a severity of 'information,' it can potentially clear an alarm in the system. When such a trap is received by the manager, the operator can query the cmTrapCriticalCount, cmTrapMajorAlarmCount, and cmTrapMinorAlarmCount objects to get the current system alarm status.
TRAP-TYPE    
  cmTrapEventLogText  
  cmActiveSessionOperatorName  
  cmActiveSessionIpAddress  
  cmActiveSessionContext  
  cmTrapEventLogSeverity  
  cmTrapEventLogType  
  cmTrapEventLogObjectClass  
  cmTrapEventLogClassId  
  cmTrapEventLogSeqNum  
  cmTrapEventLogTimeTag  

cmLogout 1.3.6.1.4.1.1996.3
Indicates that an operator has successfully logged out of the system.
TRAP-TYPE    
  cmTrapEventLogText  
  cmActiveSessionOperatorName  
  cmActiveSessionIpAddress  
  cmActiveSessionContext  
  cmTrapEventLogSeverity  
  cmTrapEventLogType  
  cmTrapEventLogObjectClass  
  cmTrapEventLogClassId  
  cmTrapEventLogSeqNum  
  cmTrapEventLogTimeTag  

cmLoginsSaturated 1.3.6.1.4.1.1996.4
Indicates that the maximum number of operators are currently logged into the system. No more logins will be allowed until one of them logs out.
TRAP-TYPE    
  cmTrapEventLogText  
  cmActiveSessionOperatorName  
  cmActiveSessionIpAddress  
  cmActiveSessionContext  
  cmTrapEventLogSeverity  
  cmTrapEventLogType  
  cmTrapEventLogObjectClass  
  cmTrapEventLogClassId  
  cmTrapEventLogSeqNum  
  cmTrapEventLogTimeTag  

cmLoginsAvailable 1.3.6.1.4.1.1996.5
Inidicates that logins are allowed again. If this trap has a severity of 'information,' it can potentially clear an alarm in the system. When such a trap is received by the manager, the operator can query the cmTrapCriticalCount, cmTrapMajorAlarmCount, and cmTrapMinorAlarmCount objects to get the current system alarm status.
TRAP-TYPE    
  cmTrapEventLogText  
  cmActiveSessionOperatorName  
  cmActiveSessionIpAddress  
  cmActiveSessionContext  
  cmTrapEventLogSeverity  
  cmTrapEventLogType  
  cmTrapEventLogObjectClass  
  cmTrapEventLogClassId  
  cmTrapEventLogSeqNum  
  cmTrapEventLogTimeTag  

cmBoardUp 1.3.6.1.4.1.1996.6
This trap indicates that the indicated system board has established communication with the System Control Module. If this trap has a severity of 'information,' it can potentially clear an alarm in the system. When such a trap is received by the manager, the operator can query the cmTrapCriticalCount, cmTrapMajorAlarmCount, and cmTrapMinorAlarmCount objects to get the current system alarm status.
TRAP-TYPE    
  cmBoardIndex  
  cmTrapEventLogSeverity  
  cmTrapEventLogType  
  cmTrapEventLogObjectClass  
  cmTrapEventLogClassId  
  cmTrapEventLogSeqNum  
  cmTrapEventLogTimeTag  

cmBoardDown 1.3.6.1.4.1.1996.7
This trap indicates that the indicated system board has stopped communicating with the System Control Module.
TRAP-TYPE    
  cmBoardIndex  
  cmTrapEventLogSeverity  
  cmTrapEventLogType  
  cmTrapEventLogObjectClass  
  cmTrapEventLogClassId  
  cmTrapEventLogSeqNum  
  cmTrapEventLogTimeTag  

cmLoginsSuspended 1.3.6.1.4.1.1996.8
Inidcates that logins are temporarily suspended for the given operator name because of 3 successive failed login attempts.
TRAP-TYPE    
  cmTrapEventLogText  
  cmActiveSessionOperatorName  
  cmActiveSessionIpAddress  
  cmActiveSessionContext  
  cmTrapEventLogSeverity  
  cmTrapEventLogType  
  cmTrapEventLogObjectClass  
  cmTrapEventLogClassId  
  cmTrapEventLogSeqNum  
  cmTrapEventLogTimeTag  

cmLoginsAllowed 1.3.6.1.4.1.1996.9
Indicates that logins are now allowed for this user name. If this trap has a severity of 'information,' it can potentially clear an alarm in the system. When such a trap is received by the manager, the operator can query the cmTrapCriticalCount, cmTrapMajorAlarmCount, and cmTrapMinorAlarmCount objects to get the current system alarm status.
TRAP-TYPE    
  cmTrapEventLogText  
  cmActiveSessionOperatorName  
  cmActiveSessionIpAddress  
  cmActiveSessionContext  
  cmTrapEventLogSeverity  
  cmTrapEventLogType  
  cmTrapEventLogObjectClass  
  cmTrapEventLogClassId  
  cmTrapEventLogSeqNum  
  cmTrapEventLogTimeTag  

cmTransmission 1.3.6.1.4.1.1996.10
OBJECT IDENTIFIER    

cmBootFileError 1.3.6.1.4.1.1996.10
Indicates that the given board did not successfully boot. The reason for this failure can be determined from the cmTrapEventLogProbableCause object. This condition requires craft action to clear.
TRAP-TYPE    
  cmBoardIndex  
  cmBoardFileName  
  cmTrapEventLogProbableCause  
  cmTrapEventLogText  
  cmTrapEventLogSeverity  
  cmTrapEventLogType  
  cmTrapEventLogObjectClass  
  cmTrapEventLogClassId  
  cmTrapEventLogSeqNum  
  cmTrapEventLogTimeTag  

cmHDSL 1.3.6.1.4.1.1996.10.3
OBJECT IDENTIFIER    

cmHDSLModemTable 1.3.6.1.4.1.1996.10.3.1
The DSL Port Information table for Configuration and Management of DSL ports.
OBJECT-TYPE    
  SEQUENCE OF  
    CmHDSLModemEntry

cmHDSLModemEntry 1.3.6.1.4.1.1996.10.3.1.1
An entry in the DSL Port Information table.
OBJECT-TYPE    
  CmHDSLModemEntry  

cmHDSLModemIndex 1.3.6.1.4.1.1996.10.3.1.1.1
The value of this object indicates the combination of shelf, port and slot number (i.e ifIndex).
OBJECT-TYPE    
  INTEGER  

cmHDSLModemType 1.3.6.1.4.1.1996.10.3.1.1.2
The value of this object specifies the bit pump type.
OBJECT-TYPE    
  INTEGER central(0), remote(1)  

cmHDSLModemTxGain 1.3.6.1.4.1.1996.10.3.1.1.3
The value of this object specifies the transmit gain.
OBJECT-TYPE    
  INTEGER  

cmHDSLModemTestMode 1.3.6.1.4.1.1996.10.3.1.1.4
The value of this Object is the test mode in operation. Please note that in future SW releases this attributes shall only be accessible to diagnostic engineers.
OBJECT-TYPE    
  INTEGER none(0), external-analog-loopback(1), digital-near-loopback(2), digital-far-loopback(3), tx-isolated-plus3-pulse(4), tx-isolated-plus1-pulse(5), tx-isolated-minus1-pulse(6), tx-isolated-minus3-pulse(7), continuous-4level-txmission(8), continuous-2level-txmission(9), set-nominal-VCXO-frequency(10), set-minimum-VCXO-frequency(11), set-maximum-VCXO-frequency(12), internal-analog-loopback(13), isolated-analog-loopback(14)  

cmHDSLModemNoiseMargin 1.3.6.1.4.1.1996.10.3.1.1.5
The value of this object specifies the noise margin of the receiver.
OBJECT-TYPE    
  INTEGER  

cmHDSLModemBPSwMajorVersion 1.3.6.1.4.1.1996.10.3.1.1.7
The value of this Object is the major Sw Version Number.
OBJECT-TYPE    
  INTEGER  

cmHDSLModemBPSwMinorVersion 1.3.6.1.4.1.1996.10.3.1.1.8
The value of this Object is the minor Sw Version Number.
OBJECT-TYPE    
  INTEGER  

cmHDSLModemBPHwVersion 1.3.6.1.4.1.1996.10.3.1.1.9
The value of this Object is the Hw Version Number.
OBJECT-TYPE    
  INTEGER  

cmHDSLModemDataRate 1.3.6.1.4.1.1996.10.3.1.1.14
This object sets/displays the data rate, in kbps, for this port.
OBJECT-TYPE    
  INTEGER dr160Kbps(160), dr208Kbps(208), dr320Kbps(320), dr416Kbps(416), dr784Kbps(784), dr1040Kbps(1040), dr1568Kbps(1568)  

cmHDSLModemCpeCode 1.3.6.1.4.1.1996.10.3.1.1.15
The value of this object describes certain charateristics that are unique to this CPE. For example line polarity, di-bit ordering, preactiviation signaling, etc. The CpeCode for a specific manufacturer's CPE is assigned and distributed by Copper Mountain Networks.
OBJECT-TYPE    
  INTEGER  

cmHDSLModemSuccessfulTrains 1.3.6.1.4.1.1996.10.3.1.1.16
The is the number of successful trains for this port. This value is zero at powerup. This value is cleared whenver the operator changes the data rate for the port, or whenever the operator sets this object to 0.
OBJECT-TYPE    
  Counter  

cmHDSLModemFailedTrainingAttempts 1.3.6.1.4.1.1996.10.3.1.1.17
The is the number of failed training attempts for this port. This value is zero at powerup. This value is cleared whenver the operator changes the data rate for the port, or whenever the operator sets this object to 0.
OBJECT-TYPE    
  Counter  

cmHDSLModemCpeResponses 1.3.6.1.4.1.1996.10.3.1.1.18
The is the number of CPE responses to training sequences that have been seen on this port. The responses may lead to successful trains or not. This value is zero at powerup. This value is cleared whenver the operator changes the data rate for the port, or whenever the operator sets this object to 0.
OBJECT-TYPE    
  Counter  

cmHDSLModemMinRate 1.3.6.1.4.1.1996.10.3.1.1.19
The value of this object indicates the minimum rate the fallback mechanism will attempt to train at. MinRate == 'none' disables the feature. MinRate >= cmHDSLModemDataRate shall be rejected. The default is 'none'.
OBJECT-TYPE    
  INTEGER none(2), dr160Kbps(160), dr208Kbps(208), dr320Kbps(320), dr416Kbps(416), dr784Kbps(784), dr1040Kbps(1040), dr1568Kbps(1568)  

cmHDSLModemCurrentRate 1.3.6.1.4.1.1996.10.3.1.1.20
This field represents either the attempted rate or the actual trained rate, depending upon the training state of the link.
OBJECT-TYPE    
  INTEGER unknown(1), dr160Kbps(160), dr208Kbps(208), dr320Kbps(320), dr416Kbps(416), dr784Kbps(784), dr1040Kbps(1040), dr1568Kbps(1568)  

cmHDSLModemCommand 1.3.6.1.4.1.1996.10.3.1.1.21
This field directs a particular command to the specific link. 'retrain' forces the link to retrain.
OBJECT-TYPE    
  INTEGER none(1), retrain(2)  

cmHDSLPerfIntervalTable 1.3.6.1.4.1.1996.10.3.2
Obsoleted 4/6/99. Dsl Port info about Perf Counters
OBJECT-TYPE    
  SEQUENCE OF  
    CmHDSLPerfIntervalEntry

cmHDSLPerfIntervalEntry 1.3.6.1.4.1.1996.10.3.2.1
Obsoleted 4/6/99. Dsl Port Performance Monitoring Counters
OBJECT-TYPE    
  CmHDSLPerfIntervalEntry  

cmHDSLPerfIndex 1.3.6.1.4.1.1996.10.3.2.1.1
Obsoleted 4/6/99. DSL port (interface) number (i.e ifIndex)
OBJECT-TYPE    
  INTEGER  

cmHDSLPerfIntervalNumber 1.3.6.1.4.1.1996.10.3.2.1.2
Obsoleted 4/6/99. A value between 1 and 24, where 1 is the most recent hour interval and 24 is the oldest hour interval
OBJECT-TYPE    
  INTEGER 1..24  

cmHDSLPerfTxUnderruns 1.3.6.1.4.1.1996.10.3.2.1.3
Obsoleted 4/6/99. Number of transmit underruns detected.
OBJECT-TYPE    
  Counter  

cmHDSLPerfRxTruncated 1.3.6.1.4.1.1996.10.3.2.1.4
Obsoleted 4/6/99. Number of frames truncated due to receiver overruns.
OBJECT-TYPE    
  Counter  

cmHDSLPerfRxBig 1.3.6.1.4.1.1996.10.3.2.1.5
Obsoleted 4/6/99. Number of receive frames that were discarded because they were too large.
OBJECT-TYPE    
  Counter  

cmHDSLPerfRxAborts 1.3.6.1.4.1.1996.10.3.2.1.6
Obsoleted 4/6/99. Number of aborted frames received.
OBJECT-TYPE    
  Counter  

cmHDSLPerfRxAlignmentErrors 1.3.6.1.4.1.1996.10.3.2.1.7
Obsoleted 4/6/99. Number of unaligned frames received.
OBJECT-TYPE    
  Counter  

cmHDSLPerfRxCRCErrors 1.3.6.1.4.1.1996.10.3.2.1.8
Obsoleted 4/6/99. Number of frames received with CRC errors.
OBJECT-TYPE    
  Counter  

cmHDSLPerfRxOverruns 1.3.6.1.4.1.1996.10.3.2.1.9
Obsoleted 4/6/99. Number of frames discarded because of receiver overruns.
OBJECT-TYPE    
  Counter  

cmHDSLPerfRxValidFrames 1.3.6.1.4.1.1996.10.3.2.1.10
Obsoleted 4/6/99. Number of valid frames received.
OBJECT-TYPE    
  Counter  

cmHDSLPerfTxValidFrames 1.3.6.1.4.1.1996.10.3.2.1.11
Obsoleted 4/6/99. Number of frames transmitted successfully
OBJECT-TYPE    
  Counter  

cmHDSLPerfRxNoBuffers 1.3.6.1.4.1.1996.10.3.2.1.12
Obsoleted 4/6/99. Number of receive frames discarded due to lack of buffers.
OBJECT-TYPE    
  Counter  

cmCpeHDSLModemTable 1.3.6.1.4.1.1996.10.3.3
The DSL Port Information table for Configuration and Management of DSL ports.
OBJECT-TYPE    
  SEQUENCE OF  
    CmCpeHDSLModemEntry

cmCpeHDSLModemEntry 1.3.6.1.4.1.1996.10.3.3.1
An entry in the DSL Port Information table.
OBJECT-TYPE    
  CmCpeHDSLModemEntry  

cmCpeHDSLModemIndex 1.3.6.1.4.1.1996.10.3.3.1.1
The value of this object indicates the combination of shelf, port and slot number (i.e ifIndex).
OBJECT-TYPE    
  INTEGER  

cmCpeHDSLModemType 1.3.6.1.4.1.1996.10.3.3.1.2
The value of this object specifies the bit pump type.
OBJECT-TYPE    
  INTEGER central(0), remote(1)  

cmCpeHDSLModemTxGain 1.3.6.1.4.1.1996.10.3.3.1.3
The value of this object specifies the transmit gain.
OBJECT-TYPE    
  INTEGER  

cmCpeHDSLModemTestMode 1.3.6.1.4.1.1996.10.3.3.1.4
The value of this Object is the test mode in operation. Please note that in future SW releases this attributes shall only be accessible to diagnostic engineers.
OBJECT-TYPE    
  INTEGER none(0), external-analog-loopback(1), digital-near-loopback(2), digital-far-loopback(3), tx-isolated-plus3-pulse(4), tx-isolated-plus1-pulse(5), tx-isolated-minus1-pulse(6), tx-isolated-minus3-pulse(7), continuous-4level-txmission(8), continuous-2level-txmission(9), set-nominal-VCXO-frequency(10), set-minimum-VCXO-frequency(11), set-maximum-VCXO-frequency(12), internal-analog-loopback(13), isolated-analog-loopback(14)  

cmCpeHDSLModemNoiseMargin 1.3.6.1.4.1.1996.10.3.3.1.5
The value of this object specifies the noise margin of the receiver.
OBJECT-TYPE    
  INTEGER  

cmCpeHDSLModemBPSwMajorVersion 1.3.6.1.4.1.1996.10.3.3.1.7
The value of this Object is the major Sw Version Number.
OBJECT-TYPE    
  INTEGER  

cmCpeHDSLModemBPSwMinorVersion 1.3.6.1.4.1.1996.10.3.3.1.8
The value of this Object is the minor Sw Version Number.
OBJECT-TYPE    
  INTEGER  

cmCpeHDSLModemBPHwVersion 1.3.6.1.4.1.1996.10.3.3.1.9
The value of this Object is the Hw Version Number.
OBJECT-TYPE    
  INTEGER  

cmCpeHDSLModemDataRate 1.3.6.1.4.1.1996.10.3.3.1.14
This object sets/displays the data rate, in kbps, for this port.
OBJECT-TYPE    
  INTEGER dr160Kbps(160), dr208Kbps(208), dr320Kbps(320), dr416Kbps(416), dr784Kbps(784), dr1040Kbps(1040), dr1568Kbps(1568)  

cmSDSLTestTable 1.3.6.1.4.1.1996.10.3.4
This table is to configure and monitor loop tests on an SDSL port. There is one instance of this table per SDSL port.
OBJECT-TYPE    
  SEQUENCE OF  
    CmSDSLTestEntry

cmSDSLTestEntry 1.3.6.1.4.1.1996.10.3.4.1
An entry in the SDSL Test table.
OBJECT-TYPE    
  CmSDSLTestEntry  

cmSDSLTestIndex 1.3.6.1.4.1.1996.10.3.4.1.1
This is the PII of the DSL port associated with the Loop Test. This is also the index into this table.
OBJECT-TYPE    
  CmObjectPII  

cmSDSLTestAction 1.3.6.1.4.1.1996.10.3.4.1.2
This field is used by the operator to start/stop the loop test on an SDSL modem. The value None is a read-only value that is displayed. The operator sets the action to Start to start a test, and Stop to stop a test.
OBJECT-TYPE    
  INTEGER none(1), start(2), stop(3)  

cmSDSLTestStatus 1.3.6.1.4.1.1996.10.3.4.1.3
The status field indicates whether a test is currently in progress. If the value is None, no test has been initiated since powerup. If the status is Complete, a test was run and stopped since powerup.
OBJECT-TYPE    
  INTEGER none(1), complete(2), inProgress(3)  

cmSDSLTestTestCompleteTime 1.3.6.1.4.1.1996.10.3.4.1.4
This is the calendar time when the last test was completed. If no test has been run since powerup, this field displays a null string.
OBJECT-TYPE    
  DisplayString  

cmSDSLTestContinuityTestResult 1.3.6.1.4.1.1996.10.3.4.1.5
This is the current result of the continuity test. This field is updated during the continuity test at least every second. This object retains its value after a test is stopped.
OBJECT-TYPE    
  INTEGER  

cmSDSLTestNearEndLoopProfile 1.3.6.1.4.1.1996.10.3.4.1.6
This field contains the current estimation of whether there is a possible short or open within 500 feet of the system. This object retains its value after the test is stopped.
OBJECT-TYPE    
  INTEGER normal(1), possibleShort(2), possibleOpen(3), pending(4), cpeTalking(5)  

cmSDSLTestDebugResult 1.3.6.1.4.1.1996.10.3.4.1.7
This is a generic 32-bit value that conatins internal information about the test, used for debugging. This object retains its value after the test is stopped.
OBJECT-TYPE    
  INTEGER  

cmSDSLTestType 1.3.6.1.4.1.1996.10.3.4.1.8
Specifies the test type. 'profile' checks the line profile and runs until commanded to stop. 'seekMaxRate' determines the maximum rate at which a line will train. 'CPEDownload' reduces the data rate to a level supported by the prom code if needed. When the testing stops at the completion of the download, or when the testing times out, the data rate will be restored to the original level if there was a rate reduction when the testing started. The CPEDownload command will preempt all other cmSDSLTest command types.
OBJECT-TYPE    
  INTEGER none(1), profile(2), seekMaxRate(3), cpeDownload(4)  

cmSDSLTestMaxRate 1.3.6.1.4.1.1996.10.3.4.1.9
Upon completion of 'seekMaxRate', this field represents the maximum rate the link will train at.
OBJECT-TYPE    
  INTEGER unknown(1), dr160Kbps(160), dr208Kbps(208), dr320Kbps(320), dr416Kbps(416), dr784Kbps(784), dr1040Kbps(1040), dr1568Kbps(1568)  

cmIface 1.3.6.1.4.1.1996.10.4
OBJECT IDENTIFIER    

cmIfaceTable 1.3.6.1.4.1.1996.10.4.1
The interface information table to manage the highest level of interface configuration, including networking model, IP and MAC addresses, encapsulation formats, and policy destinations. You can delete rows with a SET of NetModel=None, Name='', UserGroup='', and AdditionalInfo=''. It is not an error to delete a non-existent row.
OBJECT-TYPE    
  SEQUENCE OF  
    CmIfaceEntry

cmIfaceEntry 1.3.6.1.4.1.1996.10.4.1.1
An entry in the cmIface table.
OBJECT-TYPE    
  CmIfaceEntry  

cmIfacePII 1.3.6.1.4.1.1996.10.4.1.1.1
This object identifies the network interface PII.
OBJECT-TYPE    
  CmObjectPII  

cmIfaceIfIndex 1.3.6.1.4.1.1996.10.4.1.1.2
This object identifies the ifIndex associated with this interface
OBJECT-TYPE    
  INTEGER  

cmIfaceNetModel 1.3.6.1.4.1.1996.10.4.1.1.3
This object defines the Networking Model used on this interface. IP indicates IP-LAN-extension networking. VWAN indicates Wide Area Lan Extension. Frame indicates Frame-multiplexing and optional conversion. CopperVPN indicates Copper Mountain's IP-multiplexing.
OBJECT-TYPE    
  INTEGER none(1), ip(2), vwan(3), frame(4), copperVPN(5)  

cmIfaceIpAddr 1.3.6.1.4.1.1996.10.4.1.1.4
For NetModel=IP, the IP Address of this interface.
OBJECT-TYPE    
  IpAddress  

cmIfaceNetMask 1.3.6.1.4.1.1996.10.4.1.1.5
For NetModel=IP, the Subnet Mask for this interface.
OBJECT-TYPE    
  IpAddress  

cmIfaceMacAddr 1.3.6.1.4.1.1996.10.4.1.1.6
The working MAC address of the CPE connected to this DSL interface, if applicable. Reads as 0.0.0.0.0.0 or FF.FF.FF.FF.FF.FF if not applicable. Note that the working MAC may be different from the Burned-in MAC.
OBJECT-TYPE    
  OCTET STRING  

cmIfaceBurnedInMacAddr 1.3.6.1.4.1.1996.10.4.1.1.7
This object displays the burned in MAC address of the CPE connected to this DSL interface, if it has one, and supports CMCP.
OBJECT-TYPE    
  OCTET STRING  

cmIfaceFarEndAddr 1.3.6.1.4.1.1996.10.4.1.1.8
For NetModel=IP or CopperVPN, this object specifies the IP address of the device connected at the far end of this interface.
OBJECT-TYPE    
  IpAddress  

cmIfaceDestPII 1.3.6.1.4.1.1996.10.4.1.1.9
This object specifies the destination PII for user-data packets received on this interface.
OBJECT-TYPE    
  CmObjectPII  

cmIfaceFwdMode 1.3.6.1.4.1.1996.10.4.1.1.10
This is the packet forwarding mode used to route packets received on this interface. The system determines this parameter internally from the NetModel and other configuration.
OBJECT-TYPE    
  INTEGER none(1), fullIP(2), policyIP(3), vwan-pp(4), vwan-bridge(5), policyIP-enet(6), frame-mux(7), copperVPN(9), copperVPNauto(10), hdlc-vc-payload(11), vc-vc-payload(12), ppp-hdlc-1973(13), frf8-1490-1483(14)  

cmIfaceName 1.3.6.1.4.1.1996.10.4.1.1.11
A name optionally assigned by the network operator.
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

cmIfaceAdditionalInfo 1.3.6.1.4.1.1996.10.4.1.1.12
Additional information about this interface that is optionally provided by the operator.
OBJECT-TYPE    
  DisplayString SIZE(0..127)  

cmIfaceCMCPCompatible 1.3.6.1.4.1.1996.10.4.1.1.13
This object has meaning for DSL links only. This object specifies whether the CPE at the end of the DSL link uses Copper Mountain's Internal Control Protocol (CMCP). Non-DSL interfaces ignore this setting, and return 'no'when read.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

cmIfaceEncapsulationType 1.3.6.1.4.1.1996.10.4.1.1.14
This object specifies the encapsulation type of the link. For VWAN and IP network models the choices are rfc1483 or rfc1490. Frame mode supports those and other values, allowing some frame conversions between DSL and WAN interfaces.
OBJECT-TYPE    
  INTEGER none(1), rfc1483(2), rfc1490(3), hdlc(4), ppp-hdlc(5), rfc1973(6), q922(7), q922-1490(8)  

cmIfaceGroupName 1.3.6.1.4.1.1996.10.4.1.1.15
This object defines the name of the user group to which this protocol interface belongs. Note that the user group must exist in the cmGroupTable before the value can be set in this table.
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

cmIfaceServiceClass 1.3.6.1.4.1.1996.10.4.1.1.16
The value of this object indicates the current service class of the relevant DSL port on this system.
OBJECT-TYPE    
  INTEGER none(1), a(2), b(3), c(4), d(5)  

cmSubIfaceTable 1.3.6.1.4.1.1996.10.4.2
The cmSubIfaceTable is used to manage virtual circuits on a DSL link. Note that for every entry in the cmSubIfaceTable there must be is a corresponding entry in the cmIfaceTable to configure the DSL link. The following example illustrates how an operator would use the cmIfaceTable and cmSubIfaceTable to configure a DSL link and the corresponding VCs on that DSL link: 1. Configure cmIface 1.6.1 with Netmodel = Frame. This creates the frDlcmi and cmFrDlcmi entries. 2. Configure cmSubIface [1.6.1,100] by setting rowStatus to Create. This creates the frCircuit and cmFrCircuit entries for 1.6.1.100. 3. Set cmSubIface[1.6.1, 100] destPii = 1.3.1.200. This creates the cmIface entry for 1.3.1.200. The operator must still configure the frCircuit entry for 1.3.1.200.
OBJECT-TYPE    
  SEQUENCE OF  
    CmSubIfaceEntry

cmSubIfaceEntry 1.3.6.1.4.1.1996.10.4.2.1
An entry in the cmSubIfaceTable.
OBJECT-TYPE    
  CmSubIfaceEntry  

cmSubIfacePII 1.3.6.1.4.1.1996.10.4.2.1.1
This object is a unique identifier for this DSL circuit. If the DSL link is configured for Frame Relay then cmDSLCircuitId is the DLCI.
OBJECT-TYPE    
  INTEGER  

cmSubIfaceDestPII 1.3.6.1.4.1.1996.10.4.2.1.2
The value of this object identifies the far end network interface, i.e. the WAN VC to which this DSL VC is mapped, from the shelf, slot, port and user channel. PII stands for Permanent Interface Identifier.
OBJECT-TYPE    
  CmObjectPII  

cmSubIfaceName 1.3.6.1.4.1.1996.10.4.2.1.3
The value of this object is the user assigned name of this virtual circuit.
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

cmSubIfaceRowStatus 1.3.6.1.4.1.1996.10.4.2.1.4
This object is the rowStatus of the DSL Circuit. A DSL circuit is enabled by setting this object to 'active'. An entry in this table is created by setting this object to 'createAndGo' and is destroyed by setting this object to 'destroy'. The values 'notReady', 'notInService' and 'CreateAndWait' are not supported.
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

cmSubIfacePriority 1.3.6.1.4.1.1996.10.4.2.1.5
Specifies the priority of this VC on the DSL physical interface. The system does NOT distinguish between packets within a VC. Consistent with Frame-Relay requirements, the system never reorders packets within a VC.
OBJECT-TYPE    
  INTEGER low(1), high(2)  

cmEthernet 1.3.6.1.4.1.1996.10.5
OBJECT IDENTIFIER    

cmCpeEthernetIntervalTable 1.3.6.1.4.1.1996.10.5.1
Enet Port info about Perf Counters
OBJECT-TYPE    
  SEQUENCE OF  
    CmCpeEthernetIntervalEntry

cmCpeEthernetIntervalEntry 1.3.6.1.4.1.1996.10.5.1.1
Enet Port Performance Monitoring Counters
OBJECT-TYPE    
  CmCpeEthernetIntervalEntry  

cmCpeEthernetIndex 1.3.6.1.4.1.1996.10.5.1.1.1
Ethernet port (interface) number (i.e ifIndex)
OBJECT-TYPE    
  INTEGER  

cmCpeEthernetIntervalNumber 1.3.6.1.4.1.1996.10.5.1.1.2
A value between 1 and 24, where 1 is the most recent hour interval and 24 is the oldest hour interval
OBJECT-TYPE    
  INTEGER 1..24  

cmCpeEthernetIntUnknowns 1.3.6.1.4.1.1996.10.5.1.1.3
Count of Unknown Interrupt Events.
OBJECT-TYPE    
  Counter  

cmCpeEthernetRxOK 1.3.6.1.4.1.1996.10.5.1.1.4
Count of Successful Receptions.
OBJECT-TYPE    
  Counter  

cmCpeEthernetRxNoBufs 1.3.6.1.4.1.1996.10.5.1.1.5
This is the count of times couldn't get CPE Buffers.
OBJECT-TYPE    
  Counter  

cmCpeEthernetRxMiss 1.3.6.1.4.1.1996.10.5.1.1.6
This is the count of times chip couldn't receive frames.
OBJECT-TYPE    
  Counter  

cmCpeEthernetRxSkip 1.3.6.1.4.1.1996.10.5.1.1.7
Count of implied received skips.
OBJECT-TYPE    
  Counter  

cmCpeEthernetRxRunt 1.3.6.1.4.1.1996.10.5.1.1.8
Count of runt frames received.
OBJECT-TYPE    
  Counter  

cmCpeEthernetRxExtraData 1.3.6.1.4.1.1996.10.5.1.1.9
Count of times extra data received.
OBJECT-TYPE    
  Counter  

cmCpeEthernetRxCRCError 1.3.6.1.4.1.1996.10.5.1.1.10
Count of CRC Errors.
OBJECT-TYPE    
  Counter  

cmCpeEthernetRxAlignError 1.3.6.1.4.1.1996.10.5.1.1.11
Count of Received Frame Alignment Errors.
OBJECT-TYPE    
  Counter  

cmCpeEthernetRxDribbleBits 1.3.6.1.4.1.1996.10.5.1.1.12
Count of extra bits received.
OBJECT-TYPE    
  Counter  

cmCpeEthernetTxTooBig 1.3.6.1.4.1.1996.10.5.1.1.13
Count of times requested transmit length > 1518 bytes.
OBJECT-TYPE    
  Counter  

cmCpeEthernetTxNotReady 1.3.6.1.4.1.1996.10.5.1.1.14
Count of times transmitter being not ready.
OBJECT-TYPE    
  Counter  

cmCpeEthernetTxLossCRS 1.3.6.1.4.1.1996.10.5.1.1.15
Count of loss of carrier sense.
OBJECT-TYPE    
  Counter  

cmCpeEthernetTxSQEErr 1.3.6.1.4.1.1996.10.5.1.1.16
Count of SQE Errors.
OBJECT-TYPE    
  Counter  

cmCpeEthernetTxOutOfWindow 1.3.6.1.4.1.1996.10.5.1.1.17
Count of late collisions.
OBJECT-TYPE    
  Counter  

cmCpeEthernetTxJabber 1.3.6.1.4.1.1996.10.5.1.1.18
Count of transmits > 26 milliseconds.
OBJECT-TYPE    
  Counter  

cmCpeEthernetTx16Collisions 1.3.6.1.4.1.1996.10.5.1.1.19
Count of 16 txmit-collisions for a single frame.
OBJECT-TYPE    
  Counter  

cmCpeEthernetTxCollisions 1.3.6.1.4.1.1996.10.5.1.1.20
Count of total txmit-collisions.
OBJECT-TYPE    
  Counter  

cmCpeEthernetTxOK 1.3.6.1.4.1.1996.10.5.1.1.21
Count of successful transmissions.
OBJECT-TYPE    
  Counter  

cmFilter 1.3.6.1.4.1.1996.10.6
OBJECT IDENTIFIER    

cmFilterTable 1.3.6.1.4.1.1996.10.6.1
Filters to manage IP Interfaces.
OBJECT-TYPE    
  SEQUENCE OF  
    CmFilterEntry

cmFilterEntry 1.3.6.1.4.1.1996.10.6.1.1
An entry in the cmFilter Table.
OBJECT-TYPE    
  CmFilterEntry  

cmFilterIndex 1.3.6.1.4.1.1996.10.6.1.1.1
The value of this object identifies the PII (Permanent Interface Identifier) of the interface to which this filter applies.
OBJECT-TYPE    
  INTEGER  

cmFilterFilterNumber 1.3.6.1.4.1.1996.10.6.1.1.2
The value of this object identifies the Filter's place in the filter list.
OBJECT-TYPE    
  INTEGER  

cmFilterFunction 1.3.6.1.4.1.1996.10.6.1.1.3
This object specifies an action to be taken on the PII specified by cmFilterIndex. Note that DeleteList deletes all of the filters associated with the given Index.
OBJECT-TYPE    
  INTEGER active(1), insert(2), delete(3), deleteList(4)  

cmFilterSrcMask 1.3.6.1.4.1.1996.10.6.1.1.4
The value of this object indicates the mask for the source IP Address.
OBJECT-TYPE    
  IpAddress  

cmFilterSrcAdrs 1.3.6.1.4.1.1996.10.6.1.1.5
The value of this object is the source IP Address of the IP packet being ANDed with the cmFilterSrcMask.
OBJECT-TYPE    
  IpAddress  

cmFilterDstMask 1.3.6.1.4.1.1996.10.6.1.1.6
The value of this object indicates the mask for destination IP Address.
OBJECT-TYPE    
  IpAddress  

cmFilterDstAdrs 1.3.6.1.4.1.1996.10.6.1.1.7
The value of this object is the dest IP Address of the IP packet being ANDed with the cmFilterDestMask.
OBJECT-TYPE    
  IpAddress  

cmFilterIpProtocol 1.3.6.1.4.1.1996.10.6.1.1.8
This is the value of IP Protocol Identifier. It is used to match against the IP Protocol Ids of incoming messages. The protocol identifiers are as follows: 0 = IP 1 = ICMP 2 = IGMP 3 = GGP 6 = TCP 17 = UDP
OBJECT-TYPE    
  INTEGER  

cmFilterSrcPortCompare 1.3.6.1.4.1.1996.10.6.1.1.9
The value of this object specifies the comparison criterion for comparing the UDP/TCP source port of the incoming packet to cmFilterSrcPort.
OBJECT-TYPE    
  INTEGER any(1), less(2), equal(3), greater(4), notEqual(5)  

cmFilterSrcPort 1.3.6.1.4.1.1996.10.6.1.1.10
This object specifies the value to compare with the source port in the received packet.
OBJECT-TYPE    
  INTEGER  

cmFilterDstPortCompare 1.3.6.1.4.1.1996.10.6.1.1.11
The value of this object specifies the comparison criterion for comparing the UDP/TCP destination port of the incoming packet to cmFilterDestPort.
OBJECT-TYPE    
  INTEGER any(1), less(2), equal(3), greater(4), notEqual(5)  

cmFilterDstPort 1.3.6.1.4.1.1996.10.6.1.1.12
This object specifies the value to compare with the destination port in the received packet.
OBJECT-TYPE    
  INTEGER  

cmFilterAction 1.3.6.1.4.1.1996.10.6.1.1.13
This object specifies the action taken on packets that match this filter.
OBJECT-TYPE    
  INTEGER pass(1), block(2), chain(3)  

cmDSL 1.3.6.1.4.1.1996.10.7
OBJECT IDENTIFIER    

cmDSLIntervalTable 1.3.6.1.4.1.1996.10.7.1
The DSL Interval Table contains various statistics collected by each DSL Interface over the previous 96 intervals. Samples are collected at X minute intervals where X is specified by cmAlarmSamplingInterval.
OBJECT-TYPE    
  SEQUENCE OF  
    CmDSLIntervalEntry

cmDSLIntervalEntry 1.3.6.1.4.1.1996.10.7.1.1
An entry in the DSL Interval table.
OBJECT-TYPE    
  CmDSLIntervalEntry  

cmDSLIntervalIndex 1.3.6.1.4.1.1996.10.7.1.1.1
DSL port (interface) number (i.e ifIndex)
OBJECT-TYPE    
  INTEGER  

cmDSLIntervalNumber 1.3.6.1.4.1.1996.10.7.1.1.2
A value between 1 and 96, where 1 is the most recent 15 minute interval and 96 is the oldest 15 minute interval
OBJECT-TYPE    
  INTEGER 1..96  

cmDSLIntervalTxUnderruns 1.3.6.1.4.1.1996.10.7.1.1.3
Number of transmit underruns detected.
OBJECT-TYPE    
  PerfTotalCount  

cmDSLIntervalRxTruncated 1.3.6.1.4.1.1996.10.7.1.1.4
Number of frames truncated due to receiver overruns.
OBJECT-TYPE    
  PerfTotalCount  

cmDSLIntervalRxBig 1.3.6.1.4.1.1996.10.7.1.1.5
Number of receive frames that were discarded because they were too large.
OBJECT-TYPE    
  PerfTotalCount  

cmDSLIntervalRxAborts 1.3.6.1.4.1.1996.10.7.1.1.6
Number of aborted frames received.
OBJECT-TYPE    
  PerfTotalCount  

cmDSLIntervalRxAlignmentErrors 1.3.6.1.4.1.1996.10.7.1.1.7
Number of unaligned frames received.
OBJECT-TYPE    
  PerfTotalCount  

cmDSLIntervalRxCRCErrors 1.3.6.1.4.1.1996.10.7.1.1.8
Number of frames received with CRC errors.
OBJECT-TYPE    
  PerfTotalCount  

cmDSLIntervalRxOverruns 1.3.6.1.4.1.1996.10.7.1.1.9
Number of frames discarded because of receiver overruns.
OBJECT-TYPE    
  PerfTotalCount  

cmDSLIntervalRxValidFrames 1.3.6.1.4.1.1996.10.7.1.1.10
Number of valid frames received.
OBJECT-TYPE    
  PerfTotalCount  

cmDSLIntervalTxValidFrames 1.3.6.1.4.1.1996.10.7.1.1.11
Number of frames transmitted successfully
OBJECT-TYPE    
  PerfTotalCount  

cmDSLIntervalRxNoBuffers 1.3.6.1.4.1.1996.10.7.1.1.12
Number of receive frames discarded due to lack of buffers.
OBJECT-TYPE    
  PerfTotalCount  

cmDSLIntervalTimeTagBegin 1.3.6.1.4.1.1996.10.7.1.1.13
This is the time stamp indicating when the interval began.
OBJECT-TYPE    
  DisplayString  

cmDSLIntervalTimeTagEnd 1.3.6.1.4.1.1996.10.7.1.1.14
This is the time stamp indicating when the interval ended.
OBJECT-TYPE    
  DisplayString  

cmDSLIntervalMinNoiseMargin 1.3.6.1.4.1.1996.10.7.1.1.15
Minimum noise margin encountered in the interval associated with thus table. Noise Margin ins not a measurable parameter for IDSL ports; therfore this value will always be 0 for IDSL ports.
OBJECT-TYPE    
  INTEGER  

cmDSLIntervalRxValidOctets 1.3.6.1.4.1.1996.10.7.1.1.16
Number of octets received in valid frames by the DSL port in the interval associated with this table.
OBJECT-TYPE    
  PerfTotalCount  

cmDSLIntervalTxValidOctets 1.3.6.1.4.1.1996.10.7.1.1.17
Number of octets transmitted over the DSL port in the interval associated with this table.
OBJECT-TYPE    
  PerfTotalCount  

cmDSLIntervalPortUpTime 1.3.6.1.4.1.1996.10.7.1.1.18
Number of seconds that the DSL port was enbabled during the associated interval.
OBJECT-TYPE    
  PerfTotalCount  

cmDSLCurrentTable 1.3.6.1.4.1.1996.10.7.2
The DSL Current Table contains various statistics being collected for the current interval. The length of the current interval is specified by cmAlarmSamplingInterval
OBJECT-TYPE    
  SEQUENCE OF  
    CmDSLCurrentEntry

cmDSLCurrentEntry 1.3.6.1.4.1.1996.10.7.2.1
An entry in the DSL Current Table
OBJECT-TYPE    
  CmDSLCurrentEntry  

cmDSLCurrentIndex 1.3.6.1.4.1.1996.10.7.2.1.1
DSL port (interface) number (i.e ifIndex)
OBJECT-TYPE    
  INTEGER  

cmDSLCurrentTxUnderruns 1.3.6.1.4.1.1996.10.7.2.1.3
Number of transmit underruns detected.
OBJECT-TYPE    
  PerfTotalCount  

cmDSLCurrentRxTruncated 1.3.6.1.4.1.1996.10.7.2.1.4
Number of frames truncated due to receiver overruns.
OBJECT-TYPE    
  PerfTotalCount  

cmDSLCurrentRxBig 1.3.6.1.4.1.1996.10.7.2.1.5
Number of receive frames that were discarded because they were too large.
OBJECT-TYPE    
  PerfTotalCount  

cmDSLCurrentRxAborts 1.3.6.1.4.1.1996.10.7.2.1.6
Number of aborted frames received.
OBJECT-TYPE    
  PerfTotalCount  

cmDSLCurrentRxAlignmentErrors 1.3.6.1.4.1.1996.10.7.2.1.7
Number of unaligned frames received.
OBJECT-TYPE    
  PerfTotalCount  

cmDSLCurrentRxCRCErrors 1.3.6.1.4.1.1996.10.7.2.1.8
Number of frames received with CRC errors.
OBJECT-TYPE    
  PerfTotalCount  

cmDSLCurrentRxOverruns 1.3.6.1.4.1.1996.10.7.2.1.9
Number of frames discarded because of receiver overruns.
OBJECT-TYPE    
  PerfTotalCount  

cmDSLCurrentRxValidFrames 1.3.6.1.4.1.1996.10.7.2.1.10
Number of valid frames received.
OBJECT-TYPE    
  PerfTotalCount  

cmDSLCurrentTxValidFrames 1.3.6.1.4.1.1996.10.7.2.1.11
Number of frames transmitted successfully
OBJECT-TYPE    
  PerfTotalCount  

cmDSLCurrentRxNoBuffers 1.3.6.1.4.1.1996.10.7.2.1.12
Number of receive frames discarded due to lack of buffers.
OBJECT-TYPE    
  PerfTotalCount  

cmDSLCurrentMinNoiseMargin 1.3.6.1.4.1.1996.10.7.2.1.13
Minimum noise margin encountered in the interval associated with thus table. Noise Margin ins not a measurable parameter for IDSL ports; therfore this value will always be 0 for IDSL ports.
OBJECT-TYPE    
  INTEGER  

cmDSLCurrentRxValidOctets 1.3.6.1.4.1.1996.10.7.2.1.14
Number of octets received in valid frames by the DSL port in the interval associated with this table.
OBJECT-TYPE    
  PerfTotalCount  

cmDSLCurrentTxValidOctets 1.3.6.1.4.1.1996.10.7.2.1.15
Number of octets transmitted over the DSL port in the interval associated with this table.
OBJECT-TYPE    
  PerfTotalCount  

cmDSLCurrentPortUpTime 1.3.6.1.4.1.1996.10.7.2.1.16
Number of seconds that the DSL port was enbabled during the associated interval.
OBJECT-TYPE    
  PerfTotalCount  

cmDSLYesterdaysTable 1.3.6.1.4.1.1996.10.7.3
The DSL Yesterday's Table contains the cumulative sum of the various statistics for the 24 hour period from midnight to midnight preceding the most recently completed interval.
OBJECT-TYPE    
  SEQUENCE OF  
    CmDSLYesterdaysEntry

cmDSLYesterdaysEntry 1.3.6.1.4.1.1996.10.7.3.1
An entry in cmDSLYesterdaysTable.
OBJECT-TYPE    
  CmDSLYesterdaysEntry  

cmDSLYesterdaysIndex 1.3.6.1.4.1.1996.10.7.3.1.1
DSL port (interface) number (i.e ifIndex)
OBJECT-TYPE    
  INTEGER  

cmDSLYesterdaysTxUnderruns 1.3.6.1.4.1.1996.10.7.3.1.2
Number of transmit underruns detected.
OBJECT-TYPE    
  PerfTotalCount  

cmDSLYesterdaysRxTruncated 1.3.6.1.4.1.1996.10.7.3.1.3
Number of frames truncated due to receiver overruns.
OBJECT-TYPE    
  PerfTotalCount  

cmDSLYesterdaysRxBig 1.3.6.1.4.1.1996.10.7.3.1.4
Number of receive frames that were discarded because they were too large.
OBJECT-TYPE    
  PerfTotalCount  

cmDSLYesterdaysRxAborts 1.3.6.1.4.1.1996.10.7.3.1.5
Number of aborted frames received.
OBJECT-TYPE    
  PerfTotalCount  

cmDSLYesterdaysRxAlignmentErrors 1.3.6.1.4.1.1996.10.7.3.1.6
Number of unaligned frames received.
OBJECT-TYPE    
  PerfTotalCount  

cmDSLYesterdaysRxCRCErrors 1.3.6.1.4.1.1996.10.7.3.1.7
Number of frames received with CRC errors.
OBJECT-TYPE    
  PerfTotalCount  

cmDSLYesterdaysRxOverruns 1.3.6.1.4.1.1996.10.7.3.1.8
Number of frames discarded because of receiver overruns.
OBJECT-TYPE    
  PerfTotalCount  

cmDSLYesterdaysRxValidFrames 1.3.6.1.4.1.1996.10.7.3.1.9
Number of valid frames received.
OBJECT-TYPE    
  PerfTotalCount  

cmDSLYesterdaysTxValidFrames 1.3.6.1.4.1.1996.10.7.3.1.10
Number of frames transmitted successfully
OBJECT-TYPE    
  PerfTotalCount  

cmDSLYesterdaysRxNoBuffers 1.3.6.1.4.1.1996.10.7.3.1.11
Number of receive frames discarded due to lack of buffers.
OBJECT-TYPE    
  PerfTotalCount  

cmDSLYesterdaysMinNoiseMargin 1.3.6.1.4.1.1996.10.7.3.1.12
Minimum noise margin encountered in the interval associated with thus table. Noise Margin ins not a measurable parameter for IDSL ports; therfore this value will always be 0 for IDSL ports.
OBJECT-TYPE    
  INTEGER  

cmDSLYesterdaysRxValidOctets 1.3.6.1.4.1.1996.10.7.3.1.13
Number of octets received in valid frames by the DSL port in the interval associated with this table.
OBJECT-TYPE    
  PerfTotalCount  

cmDSLYesterdaysTxValidOctets 1.3.6.1.4.1.1996.10.7.3.1.14
Number of octets transmitted over the DSL port in the interval associated with this table.
OBJECT-TYPE    
  PerfTotalCount  

cmDSLYesterdaysPortUpTime 1.3.6.1.4.1.1996.10.7.3.1.15
Number of seconds that the DSL port was enbabled during the associated interval.
OBJECT-TYPE    
  PerfTotalCount  

cmDSLTodaysTable 1.3.6.1.4.1.1996.10.7.4
The DSL Todays Table contains the cumulative sum of the various statistics for the period from midnight to the most recenly completed interval.
OBJECT-TYPE    
  SEQUENCE OF  
    CmDSLTodaysEntry

cmDSLTodaysEntry 1.3.6.1.4.1.1996.10.7.4.1
An entry in cmDSLTodaysTable.
OBJECT-TYPE    
  CmDSLTodaysEntry  

cmDSLTodaysIndex 1.3.6.1.4.1.1996.10.7.4.1.1
DSL port (interface) number (i.e ifIndex)
OBJECT-TYPE    
  INTEGER  

cmDSLTodaysTxUnderruns 1.3.6.1.4.1.1996.10.7.4.1.2
Number of transmit underruns detected.
OBJECT-TYPE    
  PerfTotalCount  

cmDSLTodaysRxTruncated 1.3.6.1.4.1.1996.10.7.4.1.3
Number of frames truncated due to receiver overruns.
OBJECT-TYPE    
  PerfTotalCount  

cmDSLTodaysRxBig 1.3.6.1.4.1.1996.10.7.4.1.4
Number of receive frames that were discarded because they were too large.
OBJECT-TYPE    
  PerfTotalCount  

cmDSLTodaysRxAborts 1.3.6.1.4.1.1996.10.7.4.1.5
Number of aborted frames received.
OBJECT-TYPE    
  PerfTotalCount  

cmDSLTodaysRxAlignmentErrors 1.3.6.1.4.1.1996.10.7.4.1.6
Number of unaligned frames received.
OBJECT-TYPE    
  PerfTotalCount  

cmDSLTodaysRxCRCErrors 1.3.6.1.4.1.1996.10.7.4.1.7
Number of frames received with CRC errors.
OBJECT-TYPE    
  PerfTotalCount  

cmDSLTodaysRxOverruns 1.3.6.1.4.1.1996.10.7.4.1.8
Number of frames discarded because of receiver overruns.
OBJECT-TYPE    
  PerfTotalCount  

cmDSLTodaysRxValidFrames 1.3.6.1.4.1.1996.10.7.4.1.9
Number of valid frames received.
OBJECT-TYPE    
  PerfTotalCount  

cmDSLTodaysTxValidFrames 1.3.6.1.4.1.1996.10.7.4.1.10
Number of frames transmitted successfully
OBJECT-TYPE    
  PerfTotalCount  

cmDSLTodaysRxNoBuffers 1.3.6.1.4.1.1996.10.7.4.1.11
Number of receive frames discarded due to lack of buffers.
OBJECT-TYPE    
  PerfTotalCount  

cmDSLTodaysMinNoiseMargin 1.3.6.1.4.1.1996.10.7.4.1.12
Minimum noise margin encountered in the interval associated with thus table. Noise Margin ins not a measurable parameter for IDSL ports; therfore this value will always be 0 for IDSL ports.
OBJECT-TYPE    
  INTEGER  

cmDSLTodaysRxValidOctets 1.3.6.1.4.1.1996.10.7.4.1.13
Number of octets received in valid frames by the DSL port in the interval associated with this table.
OBJECT-TYPE    
  PerfTotalCount  

cmDSLTodaysTxValidOctets 1.3.6.1.4.1.1996.10.7.4.1.14
Number of octets transmitted over the DSL port in the interval associated with this table.
OBJECT-TYPE    
  PerfTotalCount  

cmDSLTodaysPortUpTime 1.3.6.1.4.1.1996.10.7.4.1.15
Number of seconds that the DSL port was enbabled during the associated interval.
OBJECT-TYPE    
  PerfTotalCount  

cmDSL24HrTable 1.3.6.1.4.1.1996.10.7.5
The DSL 24 Hour Table contains the cumulative sum of the various statistics for 96*cmAlarmSamplingInterval minutes worth of data or the preceding 24 hour period, whichever is less. With the default SamplingInterval of 15 minutes, this table will contain 24 hours worth of data. NOTE: With a SamplingInterval greater than 15 minutes, this table will contain some multiple of SamplingInterval so that the total is closest to, but not less than, 24 hours. (For example, with a SamplingInterval of 17 minutes, this table will contain 85 intervals = 1445 minutes = 24 hours and 5 minutes worth of data.)
OBJECT-TYPE    
  SEQUENCE OF  
    CmDSL24HrEntry

cmDSL24HrEntry 1.3.6.1.4.1.1996.10.7.5.1
An entry in cmDSL24HrTable.
OBJECT-TYPE    
  CmDSL24HrEntry  

cmDSL24HrIndex 1.3.6.1.4.1.1996.10.7.5.1.1
DSL port (interface) number (i.e ifIndex)
OBJECT-TYPE    
  INTEGER  

cmDSL24HrTxUnderruns 1.3.6.1.4.1.1996.10.7.5.1.2
Number of transmit underruns detected.
OBJECT-TYPE    
  PerfTotalCount  

cmDSL24HrRxTruncated 1.3.6.1.4.1.1996.10.7.5.1.3
Number of frames truncated due to receiver overruns.
OBJECT-TYPE    
  PerfTotalCount  

cmDSL24HrRxBig 1.3.6.1.4.1.1996.10.7.5.1.4
Number of receive frames that were discarded because they were too large.
OBJECT-TYPE    
  PerfTotalCount  

cmDSL24HrRxAborts 1.3.6.1.4.1.1996.10.7.5.1.5
Number of aborted frames received.
OBJECT-TYPE    
  PerfTotalCount  

cmDSL24HrRxAlignmentErrors 1.3.6.1.4.1.1996.10.7.5.1.6
Number of unaligned frames received.
OBJECT-TYPE    
  PerfTotalCount  

cmDSL24HrRxCRCErrors 1.3.6.1.4.1.1996.10.7.5.1.7
Number of frames received with CRC errors.
OBJECT-TYPE    
  PerfTotalCount  

cmDSL24HrRxOverruns 1.3.6.1.4.1.1996.10.7.5.1.8
Number of frames discarded because of receiver overruns.
OBJECT-TYPE    
  PerfTotalCount  

cmDSL24HrRxValidFrames 1.3.6.1.4.1.1996.10.7.5.1.9
Number of valid frames received.
OBJECT-TYPE    
  PerfTotalCount  

cmDSL24HrTxValidFrames 1.3.6.1.4.1.1996.10.7.5.1.10
Number of frames transmitted successfully
OBJECT-TYPE    
  PerfTotalCount  

cmDSL24HrRxNoBuffers 1.3.6.1.4.1.1996.10.7.5.1.11
Number of receive frames discarded due to lack of buffers.
OBJECT-TYPE    
  PerfTotalCount  

cmDSL24HrMinNoiseMargin 1.3.6.1.4.1.1996.10.7.5.1.12
Minimum noise margin encountered in the interval associated with thus table. Noise Margin ins not a measurable parameter for IDSL ports; therfore this value will always be 0 for IDSL ports.
OBJECT-TYPE    
  INTEGER  

cmDSL24HrRxValidOctets 1.3.6.1.4.1.1996.10.7.5.1.13
Number of octets received in valid frames by the DSL port in the interval associated with this table.
OBJECT-TYPE    
  PerfTotalCount  

cmDSL24HrTxValidOctets 1.3.6.1.4.1.1996.10.7.5.1.14
Number of octets transmitted over the DSL port in the interval associated with this table.
OBJECT-TYPE    
  PerfTotalCount  

cmDSL24HrPortUpTime 1.3.6.1.4.1.1996.10.7.5.1.15
Number of seconds that the DSL port was enbabled during the associated interval.
OBJECT-TYPE    
  PerfTotalCount  

cmCpeDSLIntervalTable 1.3.6.1.4.1.1996.10.7.6
Dsl Port info about Perf Counters
OBJECT-TYPE    
  SEQUENCE OF  
    CmCpeDSLIntervalEntry

cmCpeDSLIntervalEntry 1.3.6.1.4.1.1996.10.7.6.1
Dsl Port Performance Monitoring Counters
OBJECT-TYPE    
  CmCpeDSLIntervalEntry  

cmCpeDSLIntervalIndex 1.3.6.1.4.1.1996.10.7.6.1.1
DSL port (interface) number (i.e ifIndex)
OBJECT-TYPE    
  INTEGER  

cmCpeDSLIntervalNumber 1.3.6.1.4.1.1996.10.7.6.1.2
A value between 1 and 24, where 1 is the most recent hour interval and 24 is the oldest hour interval
OBJECT-TYPE    
  INTEGER 1..24  

cmCpeDSLIntervalTxUnderruns 1.3.6.1.4.1.1996.10.7.6.1.3
Number of transmit underruns detected.
OBJECT-TYPE    
  Counter  

cmCpeDSLIntervalRxTruncated 1.3.6.1.4.1.1996.10.7.6.1.4
Number of frames truncated due to receiver overruns.
OBJECT-TYPE    
  Counter  

cmCpeDSLIntervalRxBig 1.3.6.1.4.1.1996.10.7.6.1.5
Number of receive frames that were discarded because they were too large.
OBJECT-TYPE    
  Counter  

cmCpeDSLIntervalRxAborts 1.3.6.1.4.1.1996.10.7.6.1.6
Number of aborted frames received.
OBJECT-TYPE    
  Counter  

cmCpeDSLIntervalRxAlignmentErrors 1.3.6.1.4.1.1996.10.7.6.1.7
Number of unaligned frames received.
OBJECT-TYPE    
  Counter  

cmCpeDSLIntervalRxCRCErrors 1.3.6.1.4.1.1996.10.7.6.1.8
Number of frames received with CRC errors.
OBJECT-TYPE    
  Counter  

cmCpeDSLIntervalRxOverruns 1.3.6.1.4.1.1996.10.7.6.1.9
Number of frames discarded because of receiver overruns.
OBJECT-TYPE    
  Counter  

cmCpeDSLIntervalRxValidFrames 1.3.6.1.4.1.1996.10.7.6.1.10
Number of valid frames received.
OBJECT-TYPE    
  Counter  

cmCpeDSLIntervalTxValidFrames 1.3.6.1.4.1.1996.10.7.6.1.11
Number of frames transmitted successfully
OBJECT-TYPE    
  Counter  

cmCpeDSLIntervalRxNoBuffers 1.3.6.1.4.1.1996.10.7.6.1.12
Number of receive frames discarded due to lack of buffers.
OBJECT-TYPE    
  Counter  

cmCpeDSLIntervalRxValidOctets 1.3.6.1.4.1.1996.10.7.6.1.13
Number of valid octets received.
OBJECT-TYPE    
  Counter  

cmCpeDSLIntervalTxValidOctets 1.3.6.1.4.1.1996.10.7.6.1.14
Number of valid octets transmitted.
OBJECT-TYPE    
  Counter  

cmIDSL 1.3.6.1.4.1.1996.10.8
OBJECT IDENTIFIER    

cmIDSLModemTable 1.3.6.1.4.1.1996.10.8.1
The IDSL Port Information table for Configuration and Management of IDSL ports.
OBJECT-TYPE    
  SEQUENCE OF  
    CmIDSLModemEntry

cmIDSLModemEntry 1.3.6.1.4.1.1996.10.8.1.1
An entry in the IDSL Port Information table.
OBJECT-TYPE    
  CmIDSLModemEntry  

cmIDSLModemIndex 1.3.6.1.4.1.1996.10.8.1.1.1
The value of this object indicates the combination of shelf, port and slot number (i.e ifIndex).
OBJECT-TYPE    
  CmObjectPII  

cmIDSLModemOperState 1.3.6.1.4.1.1996.10.8.1.1.2
The value of this object indicates the operability state of this port.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

cmIDSLModemDataRate 1.3.6.1.4.1.1996.10.8.1.1.3
This object sets/displays the data rate, in kbps, for this port on a line card If the port is on an IDSL CPE this object only displays the data rate.
OBJECT-TYPE    
  INTEGER dr64Kbps(64), dr128Kbps(128), dr144Kbps(144)  

cmIDSLModemState 1.3.6.1.4.1.1996.10.8.1.1.4
This object indicates the internal IDSL state. The value 'activatedCpeDectected' will indicate trained and CPE detected on far end.
OBJECT-TYPE    
  INTEGER none(1), inactive(2), activating(3), activated(4), activatedCpeDetected(5)  

cmIDSLModemTerminationMode 1.3.6.1.4.1.1996.10.8.1.1.5
This object indicates the current operational mode of each port. All ports will operate in line terminated mode with the exception of except port #1 when it is being used to aquire network timing. (see cmIDSLBoardTimingMode for further details)
OBJECT-TYPE    
  INTEGER lineTerminated(1), networkTerminated(2)  

cmIDSLModemCpeCode 1.3.6.1.4.1.1996.10.8.1.1.6
The value of this object describes certain charateristics that are unique to this CPE. For example line polarity, di-bit ordering, preactiviation signaling, etc. The CpeCode for a specific manufacturer's CPE is assigned and distributed by Copper Mountain Networks.
OBJECT-TYPE    
  INTEGER  

cmIDSLModemSuccessfulTrains 1.3.6.1.4.1.1996.10.8.1.1.7
The is the number of successful trains for this port. This value is zero at powerup. This value is cleared whenver the operator changes the data rate for the port, or whenever the operator sets this object to 0.
OBJECT-TYPE    
  Counter  

cmIDSLModemFailedTrainingAttempts 1.3.6.1.4.1.1996.10.8.1.1.8
The is the number of failed training atttempts for this port. This value is zero at powerup. This value is cleared whenver the operator changes the data rate for the port, or whenever the operator sets this object to 0.
OBJECT-TYPE    
  Counter  

cmIDSLModemCpeResponses 1.3.6.1.4.1.1996.10.8.1.1.9
The is the number of CPE responses to training sequences that have been seen on this port. The responses may lead to successful trains or not. This value is zero at powerup. This value is cleared whenver the operator changes the data rate for the port, or whenever the operator sets this object to 0.
OBJECT-TYPE    
  Counter  

cmIDSLModemNetworkElements 1.3.6.1.4.1.1996.10.8.1.1.10
The value of this object indicates the current number of network elements in the loop including the CPE. This value will be 'invalid' when the LC modem is in NT mode. It will be 'unknown' when the number of elements has yet to be determined.
OBJECT-TYPE    
  INTEGER oneElement(1), twoElements(2), threeElements(3), fourElements(4), fiveElements(5), sixElements(6), cpeOnly(7), unknown(8), invalid(9)  

cmIDSLModemActivationInterval 1.3.6.1.4.1.1996.10.8.1.1.11
This is the re-training frequency (in seconds). Upon unsuccessful training, the LC shall wait cmIDSLModemActivationInterval seconds before attempting to retry. Default: 5 (also, sets of 0 are translated to 5)
OBJECT-TYPE    
  INTEGER  

cmCpeIDSLModemTable 1.3.6.1.4.1.1996.10.8.2
The IDSL Port Information table for Configuration and Management of IDSL ports.
OBJECT-TYPE    
  SEQUENCE OF  
    CmCpeIDSLModemEntry

cmCpeIDSLModemEntry 1.3.6.1.4.1.1996.10.8.2.1
An entry in the IDSL Port Information table.
OBJECT-TYPE    
  CmCpeIDSLModemEntry  

cmCpeIDSLModemIndex 1.3.6.1.4.1.1996.10.8.2.1.1
The value of this object indicates the combination of shelf, port and slot number (i.e ifIndex).
OBJECT-TYPE    
  CmObjectPII  

cmCpeIDSLModemOperState 1.3.6.1.4.1.1996.10.8.2.1.2
The value of this object indicates the operability state of this port.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

cmCpeIDSLModemDataRate 1.3.6.1.4.1.1996.10.8.2.1.3
This object sets/displays the data rate, in kbps, for this port on a line card If the port is on an IDSL CPE this object only displays the data rate.
OBJECT-TYPE    
  INTEGER dr64Kbps(64), dr128Kbps(128), dr144Kbps(144)  

cmCpeIDSLModemState 1.3.6.1.4.1.1996.10.8.2.1.4
This object indicates the internal IDSL state.
OBJECT-TYPE    
  INTEGER none(1), active(2), activating(3), activated(4)  

cmCpeIDSLModemTerminationMode 1.3.6.1.4.1.1996.10.8.2.1.5
This object indicates the current operational mode of each port. All ports will operate in line terminated mode with the exception of except port #1 when it is being used to aquire network timing. (see cmIDSLBoardTimingMode for further details)
OBJECT-TYPE    
  INTEGER lineTerminated(1), networkTerminated(2)  

cmFrameRelay 1.3.6.1.4.1.1996.10.9
OBJECT IDENTIFIER    

cmFrDlcmiTable 1.3.6.1.4.1.1996.10.9.1
The Parameters for the Data Link Connection Management Interface for the frame relay service on this interface.
OBJECT-TYPE    
  SEQUENCE OF  
    CmFrDlcmiEntry

cmFrDlcmiEntry 1.3.6.1.4.1.1996.10.9.1.1
The Parameters for a particular Data Link Connection Management Interface.
OBJECT-TYPE    
  CmFrDlcmiEntry  

cmFrDlcmiIfIndex 1.3.6.1.4.1.1996.10.9.1.1.1
The value of this object identifies the WAN port interface from the shelf, slot, port. PII stands for Permanent Interface Identifier.
OBJECT-TYPE    
  CmObjectPII  

cmFrDlcmiAdminState 1.3.6.1.4.1.1996.10.9.1.1.2
This object is an opertor configurable state that specifies whether this interface is to be activated.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

cmFrDlcmiOperState 1.3.6.1.4.1.1996.10.9.1.1.3
This object displays the operational state of the frame relay link. The state is Enabled if: (1) the physical port ifTableOperStatus is Up, (2) cmFrDlcmiAdminState is Enabled and (3)if LMI is enabled on the link, the LMI protocol layer is up. Otherwise the state is Disabled.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

cmFrDlcmiFirstDLCI 1.3.6.1.4.1.1996.10.9.1.1.4
This object identifies the first DLCI that is assigned to this DSL link.
OBJECT-TYPE    
  INTEGER 0..991  

cmFrDlcmiLMIMode 1.3.6.1.4.1.1996.10.9.1.1.5
If LMI polling is used, this indicates whether this circuit is performing polling (DTE) or is bing polled (DCE), or both (NNI)
OBJECT-TYPE    
  INTEGER dte(1), dce(2), nni(3)  

cmFrDlcmiDceN392 1.3.6.1.4.1.1996.10.9.1.1.6
This gives the time interval in which a Status Enquiry is expected to be received from the user. If a Status Enquiry is not received during this time interval, an error counter is incremented.
OBJECT-TYPE    
  INTEGER 1..10  

cmFrDlcmiDceN393 1.3.6.1.4.1.1996.10.9.1.1.7
This is the number of N392 intervals over which the error threshold is counted. For example, if within 'DceN393' number of events the station receives 'DceN392' number of errors, the interface is marked as down.
OBJECT-TYPE    
  INTEGER 1..10  

cmFrDlcmiDceT392 1.3.6.1.4.1.1996.10.9.1.1.8
The value of this object the polling verification timer in units of seconds. The system stops the timer whenever it receives a STATUS ENQUIRY message from the polling device and starts the timer when it responds with a STATUS message. If the timer expries it indicates an error in the polling process.
OBJECT-TYPE    
  INTEGER 5..30  

cmFrDlcmiRcvUnknownDLCI 1.3.6.1.4.1.1996.10.9.1.1.10
The number of frames with an unknown DLCI received on this interface.
OBJECT-TYPE    
  Counter  

cmFrDlcmiLMITxStatusEnquiries 1.3.6.1.4.1.1996.10.9.1.1.11
The total number of LMI status enquiries sent by the DTE on this interface.
OBJECT-TYPE    
  Counter  

cmFrDlcmiLMITxStatusResponses 1.3.6.1.4.1.1996.10.9.1.1.12
The total number of LMI status responses sent by the DCE on this interface.
OBJECT-TYPE    
  Counter  

cmFrDlcmiLMIRxStatusEnquiries 1.3.6.1.4.1.1996.10.9.1.1.13
The total number of LMI status enquiries received by the DCE on this interface.
OBJECT-TYPE    
  Counter  

cmFrDlcmiLMIRxStatusResponses 1.3.6.1.4.1.1996.10.9.1.1.14
The total number of LMI status responses received by the DTE on this interface.
OBJECT-TYPE    
  Counter  

cmFrDlcmiLMIRxUpdates 1.3.6.1.4.1.1996.10.9.1.1.15
The total number of LMI status updates received by the DTE on this interface.
OBJECT-TYPE    
  Counter  

cmFrDlcmiUnknownLMIMessagesRcvd 1.3.6.1.4.1.1996.10.9.1.1.16
The total number of unknown LMI messages received on this interface.
OBJECT-TYPE    
  Counter  

cmFrDlcmiLostLMISequences 1.3.6.1.4.1.1996.10.9.1.1.17
The total number of times a loss of sequencing in received LMI messages was detected by the DTE on this interface.
OBJECT-TYPE    
  Counter  

cmFrCircuitTable 1.3.6.1.4.1.1996.10.9.2
A table containing information about specific Data Link Connection Identifiers and corresponding virtual circuits.
OBJECT-TYPE    
  SEQUENCE OF  
    CmFrCircuitEntry

cmFrCircuitEntry 1.3.6.1.4.1.1996.10.9.2.1
The information regarding a single Data Link Connection Identifier.
OBJECT-TYPE    
  CmFrCircuitEntry  

cmFrCircuitIfIndex 1.3.6.1.4.1.1996.10.9.2.1.1
The ifIndex Value of the ifEntry this virtual circuit is layered onto.
OBJECT-TYPE    
  CmObjectPII  

cmFrCircuitDlci 1.3.6.1.4.1.1996.10.9.2.1.2
The Data Link Connection Identifier for this virtual circuit.
OBJECT-TYPE    
  DLCI  

cmFrCircuitOperState 1.3.6.1.4.1.1996.10.9.2.1.3
This object displays the operational state of a PVC. The state is Enabled if: (1) cmFrDlcmiOperState is Enabled for the frame relay link, (2) frCircuitState is Active, (3) if LMI is enabled on the link, the frame relay DCE or NNI peer reports the PVC status as Active, (4) if the PVC is configured in Frame Mux mode, the PVC to which this cmFrCircuit is mapped is Active. Otherwise the state is Disabled.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

cmFrCircuitFramesDroppedTxUnavail 1.3.6.1.4.1.1996.10.9.2.1.4
Number of Tx frames which were dropped on this circuit because the link was down or the permanent virtual circuit was inactive.
OBJECT-TYPE    
  Counter  

cmFrCircuitFramesDroppedRxUnavail 1.3.6.1.4.1.1996.10.9.2.1.5
Number of Rx frames which were dropped on this circuit because the link was down or the permanent virtual circuit was inactive.
OBJECT-TYPE    
  Counter  

cmFrCircuitFramesDroppedExcess 1.3.6.1.4.1.1996.10.9.2.1.6
Number of frames which were dropped on this circuit because the hold queue was full.
OBJECT-TYPE    
  Counter  

cmATM 1.3.6.1.4.1.1996.10.10
OBJECT IDENTIFIER    

cmAtmVclTable 1.3.6.1.4.1.1996.10.10.1
The configuration parameters for the ATM VC on this interface.
OBJECT-TYPE    
  SEQUENCE OF  
    CmAtmVclEntry

cmAtmVclEntry 1.3.6.1.4.1.1996.10.10.1.1
The configuration parameters for a particular ATM VC.
OBJECT-TYPE    
  CmAtmVclEntry  

cmAtmVclPII 1.3.6.1.4.1.1996.10.10.1.1.1
This is the index into this table. This is the PII of the DS3 port used for this ATM interface together with the link identifier for the VCL.
OBJECT-TYPE    
  CmObjectPII  

cmAtmVclVpi 1.3.6.1.4.1.1996.10.10.1.1.2
The VPI value of the VCL. NOTE: Vpi 0 is reserved for ATM Link Management functions.
OBJECT-TYPE    
  INTEGER  

cmAtmVclVci 1.3.6.1.4.1.1996.10.10.1.1.3
The VCI value of the VCL. NOTE: Vci values 0-31 are reserved for Path management functions.
OBJECT-TYPE    
  INTEGER  

cmAtmVclAdminStatus 1.3.6.1.4.1.1996.10.10.1.1.4
This object is instanciated only for a VCL which terminates a VCC (i.e., one which is NOT cross-connected to other VCLs). Its value specifies the desired administrative state of the VCL. In the system, setting this value to Down will disable the VC from transporting user data. Setting this value to Up allows the VC to be available for trsporting user data traffic. DEFAULT: Down
OBJECT-TYPE    
  INTEGER up(1), down(2)  

cmAtmVclOperStatus 1.3.6.1.4.1.1996.10.10.1.1.5
The current operational status of the VCL.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

cmAtmVclLastChange 1.3.6.1.4.1.1996.10.10.1.1.6
The value of sysUpTime at the time this VCL entered its current operational state.
OBJECT-TYPE    
  TimeTicks  

cmAtmVclAalType 1.3.6.1.4.1.1996.10.10.1.1.7
An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAl is in use. It is the type of AAL used on this VCC. The AAl type includes AAL1, AAL2, AAL3/4, and AAL5. The other(4) may be a user-defined AAL type. The unkown type indicates that the AAL type cannot be determined. DEFAULT: Aal5
OBJECT-TYPE    
  INTEGER aal5(3)  

cmAtmVclAal5CpcsTransmitSduSize 1.3.6.1.4.1.1996.10.10.1.1.8
An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 is in use. It is the maximum AAl5 CPCS SDU size, in octets, that is supported on the transmit direction of this VCC. DEFAULT: 1600
OBJECT-TYPE    
  INTEGER  

cmAtmVclAal5CpcsReceiveSduSize 1.3.6.1.4.1.1996.10.10.1.1.9
An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 is in use. It is the maximum AAl5 CPCS SDU size, in octets, that is supported on the receive direction of this VCC. DEFAULT: 1600
OBJECT-TYPE    
  INTEGER  

cmAtmVclRowStatus 1.3.6.1.4.1.1996.10.10.1.1.10
This object is used to create, modify, or delete a row in the table. To create a new VCL, set this object initially to 'createAndGo' (for sanity checking), or 'Active.' To delete a VCL, set this entry to 'Destroy.' When reading back an existing VCL, the RowStatus will always be 'Active.'
OBJECT-TYPE    
  INTEGER active(1), createAndGo(4), destroy(6)  

cmDS3AtmTable 1.3.6.1.4.1.1996.10.10.2
This is a proprietary table used to configure some specific attributes of the DS3-ATM interface that are not defined in any of the standard MIBs.
OBJECT-TYPE    
  SEQUENCE OF  
    CmDS3AtmEntry

cmDS3AtmEntry 1.3.6.1.4.1.1996.10.10.2.1
The configuration parameters for a particular DS3-ATM interface.
OBJECT-TYPE    
  CmDS3AtmEntry  

cmDS3AtmPII 1.3.6.1.4.1.1996.10.10.2.1.1
This is the index into this table.
OBJECT-TYPE    
  CmObjectPII  

cmDS3AtmCbitParityEnable 1.3.6.1.4.1.1996.10.10.2.1.2
This object enables C-bit Parity checking on the DS3-ATM interface. If this port is connected to an M23 configured interface, this field should be set to 'disable.' DEFAULT: enable
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

cmDS3AtmCellPayloadScrambling 1.3.6.1.4.1.1996.10.10.2.1.3
This object is used to enable/disable payload scrambling on the DS3-ATM interface. DEFAULT: disable
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

cmDS3AtmCellMapping 1.3.6.1.4.1.1996.10.10.2.1.4
This object is used to configure the physical layer data format on the DS3-ATM interface. DEFAULT: hec
OBJECT-TYPE    
  INTEGER plcp(1), hec(2)  

cmIMUX 1.3.6.1.4.1.1996.10.11
OBJECT IDENTIFIER    

cmBundleTable 1.3.6.1.4.1.1996.10.11.1
This table contains the currently configured IMUX bundles. Bundle is a logical entity and represents the collection of ports. Each entry in the table is represented by bundle PII. Bundle PIIs are identified with a special slot number of 51.
OBJECT-TYPE    
  SEQUENCE OF  
    CmBundleEntry

cmBundleEntry 1.3.6.1.4.1.1996.10.11.1.1
Each entry in the table represents collection of ports for the IMUX bundle. An entry in the table is indexed by bundle PII. (Bundle PII is a logical entity identified by the slot number value of 51). This entry will contain PII, EndPointID and status information of all the ports that are part of this bundle.
OBJECT-TYPE    
  CmBundleEntry  

cmBundlePII 1.3.6.1.4.1.1996.10.11.1.1.1
This value is used as an index into the table. An IMUX BundlePII is a logical PII and is identified by a logical slot number of of 51.
OBJECT-TYPE    
  CmObjectPII  

cmBundleRowStatus 1.3.6.1.4.1.1996.10.11.1.1.2
This object is the rowStatus of the IMUX bundle. An IMUX bundle is enabled by setting this object to 'active' and is destroyed by setting this object to 'destroy'.
OBJECT-TYPE    
  INTEGER active(1), destroy(6)  

cmBundleMember1PII 1.3.6.1.4.1.1996.10.11.1.1.3
This is the PII of the first constituent DSL port.
OBJECT-TYPE    
  CmObjectPII  

cmBundleMember1EndPointID 1.3.6.1.4.1.1996.10.11.1.1.4
This is the EndPoint ID that uniquely identifies the IMUX CPE connected to the DSL port indicated by Member1PII.
OBJECT-TYPE    
  OCTET STRING  

cmBundleMember1Status 1.3.6.1.4.1.1996.10.11.1.1.5
This object indicates the current status of this DSL port. 'None' indicates that there is no link configured or the configured link has not trained. 'Active' indicates that the port is trained and available to the transmit user data. 'waitForAdd' indicates that the link is trained and the system is waiting for an addition acknowledgement from the IMUX CPE.
OBJECT-TYPE    
  INTEGER none(1), active(2), waitForAdd(3)  

cmBundleMember2PII 1.3.6.1.4.1.1996.10.11.1.1.6
This is the PII of the second constituent DSL port.
OBJECT-TYPE    
  CmObjectPII  

cmBundleMember2EndPointID 1.3.6.1.4.1.1996.10.11.1.1.7
This is the EndPoint ID that uniquely identifies the IMUX CPE connected to the DSL port indicated by Member2PII.
OBJECT-TYPE    
  OCTET STRING  

cmBundleMember2Status 1.3.6.1.4.1.1996.10.11.1.1.8
This object indicates the current status of this DSL port. 'None' indicates that there is no link configured or the configured link has not trained. 'Active' indicates that the port is trained and available to the transmit user data. 'waitForAdd' indicates that the link is trained and the system is waiting for an addition acknowledgement from the IMUX CPE.
OBJECT-TYPE    
  INTEGER none(1), active(2), waitForAdd(3)  

cmBundleMember3PII 1.3.6.1.4.1.1996.10.11.1.1.9
This is the PII of the third constituent DSL port.
OBJECT-TYPE    
  CmObjectPII  

cmBundleMember3EndPointID 1.3.6.1.4.1.1996.10.11.1.1.10
This is the EndPoint ID that uniquely identifies the IMUX CPE connected to the DSL port indicated by Member3PII.
OBJECT-TYPE    
  OCTET STRING  

cmBundleMember3Status 1.3.6.1.4.1.1996.10.11.1.1.11
This object indicates the current status of this DSL port. 'None' indicates that there is no link configured or the configured link has not trained. 'Active' indicates that the port is trained and available to the transmit user data. 'waitForAdd' indicates that the link is trained and the system is waiting for an addition acknowledgement from the IMUX CPE.
OBJECT-TYPE    
  INTEGER none(1), active(2), waitForAdd(3)  

cmBundleMember4PII 1.3.6.1.4.1.1996.10.11.1.1.12
This is the PII of the fourth constituent DSL port.
OBJECT-TYPE    
  CmObjectPII  

cmBundleMember4EndPointID 1.3.6.1.4.1.1996.10.11.1.1.13
This is the EndPoint ID that uniquely identifies the IMUX CPE connected to the DSL port indicated by Member4PII.
OBJECT-TYPE    
  OCTET STRING  

cmBundleMember4Status 1.3.6.1.4.1.1996.10.11.1.1.14
This object indicates the current status of this DSL port. 'None' indicates that there is no link configured or the configured link has not trained. 'Active' indicates that the port is trained and available to the transmit user data. 'waitForAdd' indicates that the link is trained and the system is waiting for an addition acknowledgement from the IMUX CPE.
OBJECT-TYPE    
  INTEGER none(1), active(2), waitForAdd(3)  

cmDataPort 1.3.6.1.4.1.1996.10.12
OBJECT IDENTIFIER    

cmCpeDataPortTable 1.3.6.1.4.1.1996.10.12.1
This table contains configuration and status information for the EIA530 ports. The index for this table is the PII of the system port connected to one of the IMUX DSL ports.
OBJECT-TYPE    
  SEQUENCE OF  
    CmCpeDataPortEntry

cmCpeDataPortEntry 1.3.6.1.4.1.1996.10.12.1.1
Each entry in the table contains configuration and status information for a data port. The index for this table is the PII of the system port connected to one of the IMUX DSL ports.
OBJECT-TYPE    
  CmCpeDataPortEntry  

cmCpeDataPortIndex 1.3.6.1.4.1.1996.10.12.1.1.1
PII of the system port connected to one of the IMUX DSL ports.
OBJECT-TYPE    
  CmObjectPII  

cmCpeDataPortType 1.3.6.1.4.1.1996.10.12.1.1.2
Data Port Type i.e. EIA-530 or V.35.
OBJECT-TYPE    
  INTEGER eia-530(1), v35(2), unknown(3)  

cmCpeDataPortForceDSR 1.3.6.1.4.1.1996.10.12.1.1.3
If enabled, DSR is ON regardless of OperState.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

cmCpeDataPortIgnoreDTR 1.3.6.1.4.1.1996.10.12.1.1.4
If this object is set to yes, CPE will not monitor DTR signal line. If set to no, CPE will de-assert DCD if DTR signal is OFF.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

cmCpeDataPortIgnoreRTS 1.3.6.1.4.1.1996.10.12.1.1.5
If this object is set to yes, CPE will not monitor RTS signal line. If set to no, CPE will de-assert DCD if RTS signal is OFF.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

cmCpeDataPortTerminalTiming 1.3.6.1.4.1.1996.10.12.1.1.6
If this object is set to yes, CPE will assert terminal timing.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

cmCpeDataPortTM 1.3.6.1.4.1.1996.10.12.1.1.7
Current state of TM signal. It is asserted when LL is ON.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

cmCpeDataPortLL 1.3.6.1.4.1.1996.10.12.1.1.8
Current state of LL signal. Local loopback is generated by DTE device.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

cmCpeDataPortRL 1.3.6.1.4.1.1996.10.12.1.1.9
Current state of RL signal. Remote loopback is generated by DTE device.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

cmCpeDataPortDTR 1.3.6.1.4.1.1996.10.12.1.1.10
Current state of DTR signal.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

cmCpeDataPortRTS 1.3.6.1.4.1.1996.10.12.1.1.11
Current state of RTS signal.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

cmCpeDataPortDSR 1.3.6.1.4.1.1996.10.12.1.1.12
Current state of DSR signal. DSR is on if OperState value is enabled or testing.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

cmCpeDataPortCTS 1.3.6.1.4.1.1996.10.12.1.1.13
Current state of CTS signal.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

cmCpeDataPortDCD 1.3.6.1.4.1.1996.10.12.1.1.14
Current state of DCD signal.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

cmCpeDataPortTxClockSource 1.3.6.1.4.1.1996.10.12.1.1.15
Indicates whether the clock source is internal or external.
OBJECT-TYPE    
  INTEGER external(1), internal(2)  

cmCpeDataPortDTEDCE 1.3.6.1.4.1.1996.10.12.1.1.16
Indicates whether the port is operating as DTE or DCE.
OBJECT-TYPE    
  INTEGER dte(1), dce(2)  

cmCpeDataPortCRC 1.3.6.1.4.1.1996.10.12.1.1.17
Indicates the type of CRC used on packets.
OBJECT-TYPE    
  INTEGER crc-ccitt(1)  

cmCpeDataPortClockRate 1.3.6.1.4.1.1996.10.12.1.1.18
Clock rate of port in bps(bits per second). Defaults to 1544000 for loopback. Default to 1544000 for loopback.
OBJECT-TYPE    
  INTEGER 0..3136000  

cmCpeDataPortAdminState 1.3.6.1.4.1.1996.10.12.1.1.19
Current administrative state of the port.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

cmCpeDataPortOperState 1.3.6.1.4.1.1996.10.12.1.1.20
Current operational state of the the port. Allowed values are diabled, enabled, testing.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2), testing(3)  

cmCpeDataPortLoopbackConfig 1.3.6.1.4.1.1996.10.12.1.1.21
Loopback configuration state of the port.
OBJECT-TYPE    
  INTEGER noLoop(1), localLoop(2)  

cmCpeDataPortLoopbackStatus 1.3.6.1.4.1.1996.10.12.1.1.22
Loopback status of the port.
OBJECT-TYPE    
  INTEGER noLoop(1), localLoop(2)  

cmCpeDataPortIntervalTable 1.3.6.1.4.1.1996.10.12.2
This table provides the transmit and receive statistics for the data ports. Sampling inteval is 15 minutes and each data port contains at the most 96 intervals. Interval number 1 represents the current interval. The index for this table is the PII of the system port connected to one of the IMUX DSL ports and the interval number.
OBJECT-TYPE    
  SEQUENCE OF  
    CmCpeDataPortIntervalEntry

cmCpeDataPortIntervalEntry 1.3.6.1.4.1.1996.10.12.2.1
Each entry in the table contains the transmit and receive statistics for a data port. The index for this table is the PII of the system port connected to one of the IMUX DSL ports and the interval number.
OBJECT-TYPE    
  CmCpeDataPortIntervalEntry  

cmCpeDataPortIntervalIndex 1.3.6.1.4.1.1996.10.12.2.1.1
PII of the system port connected to one of the IMUX DSL ports.
OBJECT-TYPE    
  CmObjectPII  

cmCpeDataPortIntervalIntervalNumber 1.3.6.1.4.1.1996.10.12.2.1.2
Interval number. Interval durations is 15 minutes. Interval number 1 represents the current interval.
OBJECT-TYPE    
  INTEGER 1..96  

cmCpeDataPortIntervalRxFrames 1.3.6.1.4.1.1996.10.12.2.1.3
Number of frames received on the data port in this interval.
OBJECT-TYPE    
  Counter  

cmCpeDataPortIntervalRxOctets 1.3.6.1.4.1.1996.10.12.2.1.4
Number of octets received on the data port in this interval.
OBJECT-TYPE    
  Counter  

cmCpeDataPortIntervalRxDiscards 1.3.6.1.4.1.1996.10.12.2.1.5
Number of received frames discarded in this interval.
OBJECT-TYPE    
  Counter  

cmCpeDataPortIntervalRxErrors 1.3.6.1.4.1.1996.10.12.2.1.6
Number of erred frames received on the data port in this interval.
OBJECT-TYPE    
  Counter  

cmCpeDataPortIntervalTxFrames 1.3.6.1.4.1.1996.10.12.2.1.7
Number of frames transmitted on the data port in this interval.
OBJECT-TYPE    
  Counter  

cmCpeDataPortIntervalTxOctets 1.3.6.1.4.1.1996.10.12.2.1.8
Number of octets transmitted on the data port in this interval.
OBJECT-TYPE    
  Counter  

cmCpeDataPortIntervalTxDiscards 1.3.6.1.4.1.1996.10.12.2.1.9
Number of transmission intended frames discarded in this interval.
OBJECT-TYPE    
  Counter  

cmCpeDataPortIntervalTxErrors 1.3.6.1.4.1.1996.10.12.2.1.10
Number of erred frames transmitted on the data port in this interval.
OBJECT-TYPE    
  Counter  

cmCpeDataPortTotalTable 1.3.6.1.4.1.1996.10.12.3
This table provides the transmit and receive statistics for the data ports since the system was restarted. The index for this table is the PII of the system port connected to one of the IMUX DSL ports.
OBJECT-TYPE    
  SEQUENCE OF  
    CmCpeDataPortTotalEntry

cmCpeDataPortTotalEntry 1.3.6.1.4.1.1996.10.12.3.1
Each entry in the table contains the transmit and receive statistics for a data port. The index for this table is the PII of the system port connected to one of the IMUX DSL ports.
OBJECT-TYPE    
  CmCpeDataPortTotalEntry  

cmCpeDataPortTotalIndex 1.3.6.1.4.1.1996.10.12.3.1.1
PII of the system port connected to one of the IMUX DSL ports.
OBJECT-TYPE    
  CmObjectPII  

cmCpeDataPortTotalRxFrames 1.3.6.1.4.1.1996.10.12.3.1.2
Total number of frames received on the data port since the system was restarted.
OBJECT-TYPE    
  Counter  

cmCpeDataPortTotalRxOctets 1.3.6.1.4.1.1996.10.12.3.1.3
Total number of octets received on the data port since the system was restarted.
OBJECT-TYPE    
  Counter  

cmCpeDataPortTotalRxDiscards 1.3.6.1.4.1.1996.10.12.3.1.4
Total number of received frames discarded on the data port since the system was restarted.
OBJECT-TYPE    
  Counter  

cmCpeDataPortTotalRxErrors 1.3.6.1.4.1.1996.10.12.3.1.5
Total number of erred frames received on the data port since the system was restarted.
OBJECT-TYPE    
  Counter  

cmCpeDataPortTotalTxFrames 1.3.6.1.4.1.1996.10.12.3.1.6
Total number of frames transmitted on the data port since the system was restarted.
OBJECT-TYPE    
  Counter  

cmCpeDataPortTotalTxOctets 1.3.6.1.4.1.1996.10.12.3.1.7
Total number of octets transmitted on the data port since the system was restarted.
OBJECT-TYPE    
  Counter  

cmCpeDataPortTotalTxDiscards 1.3.6.1.4.1.1996.10.12.3.1.8
Total number of transmission intended frames discarded on the data port since the system was restarted.
OBJECT-TYPE    
  Counter  

cmCpeDataPortTotalTxErrors 1.3.6.1.4.1.1996.10.12.3.1.9
Total number of erred frames transmitted on the data port since the system was restarted.
OBJECT-TYPE    
  Counter  

cmBootFileOK 1.3.6.1.4.1.1996.11
Indicates that the given boot file was downloaded to the given board successfully. If this trap has a severity of 'information,' it can potentially clear an alarm in the system. When such a trap is received by the manager, the operator can query the cmTrapCriticalCount, cmTrapMajorAlarmCount, and cmTrapMinorAlarmCount objects to get the current system alarm status.
TRAP-TYPE    
  cmBoardIndex  
  cmBoardFileName  
  cmTrapEventLogProbableCause  
  cmTrapEventLogText  
  cmTrapEventLogSeverity  
  cmTrapEventLogType  
  cmTrapEventLogObjectClass  
  cmTrapEventLogClassId  
  cmTrapEventLogSeqNum  
  cmTrapEventLogTimeTag  

cmAttributeChange 1.3.6.1.4.1.1996.12
Indicates an attribute was changed by an operator. The text field contains the name of the changed attribute and the new value.
TRAP-TYPE    
  cmTrapEventLogText  
  cmActiveSessionOperatorName  
  cmActiveSessionIpAddress  
  cmActiveSessionContext  
  cmTrapEventLogSeverity  
  cmTrapEventLogType  
  cmTrapEventLogObjectClass  
  cmTrapEventLogClassId  
  cmTrapEventLogSeqNum  
  cmTrapEventLogTimeTag  

cmConfigFileReadFailed 1.3.6.1.4.1.1996.13
Indicates that the Config File Read operation failed. The text field contains a description of the error encountered.
TRAP-TYPE    
  cmTrapEventLogText  
  cmTrapEventLogSeverity  
  cmTrapEventLogType  
  cmTrapEventLogObjectClass  
  cmTrapEventLogClassId  
  cmTrapEventLogSeqNum  
  cmTrapEventLogTimeTag  

cmConfigFileReadOk 1.3.6.1.4.1.1996.14
Indicates the Config File Read operation executed successfully. If this trap has a severity of 'information,' it can potentially clear an alarm in the system. When such a trap is received by the manager, the operator can query the cmTrapCriticalCount, cmTrapMajorAlarmCount, and cmTrapMinorAlarmCount objects to get the current system alarm status.
TRAP-TYPE    
  cmTrapEventLogText  
  cmTrapEventLogSeverity  
  cmTrapEventLogType  
  cmTrapEventLogObjectClass  
  cmTrapEventLogClassId  
  cmTrapEventLogSeqNum  
  cmTrapEventLogTimeTag  

cmConfigFileWriteFailed 1.3.6.1.4.1.1996.15
Indicates that the Config File Write operation failed. The text field contains a description of the error encountered.
TRAP-TYPE    
  cmTrapEventLogText  
  cmTrapEventLogSeverity  
  cmTrapEventLogType  
  cmTrapEventLogObjectClass  
  cmTrapEventLogClassId  
  cmTrapEventLogSeqNum  
  cmTrapEventLogTimeTag  

cmConfigFileWriteOk 1.3.6.1.4.1.1996.16
Indicates the Config File Write operation executed successfully. If this trap has a severity of 'information,' it can potentially clear an alarm in the system. When such a trap is received by the manager, the operator can query the cmTrapCriticalCount, cmTrapMajorAlarmCount, and cmTrapMinorAlarmCount objects to get the current system alarm status.
TRAP-TYPE    
  cmTrapEventLogText  
  cmTrapEventLogSeverity  
  cmTrapEventLogType  
  cmTrapEventLogObjectClass  
  cmTrapEventLogClassId  
  cmTrapEventLogSeqNum  
  cmTrapEventLogTimeTag  

cmOperStateChange 1.3.6.1.4.1.1996.17
Indicates that the Operability State of a resource has changed in the system.
TRAP-TYPE    
  cmStateOperState  
  cmNameIfName  
  cmNamePII  
  cmGroupName  
  cmTrapEventLogSeverity  
  cmTrapEventLogType  
  cmTrapEventLogObjectClass  
  cmTrapEventLogClassId  
  cmTrapEventLogSeqNum  
  cmTrapEventLogTimeTag  

cmDiagnostic 1.3.6.1.4.1.1996.18
Indicates some diagnostic event occurred. The text field contains a description of the event.
TRAP-TYPE    
  cmTrapEventLogText  
  cmTrapEventLogSeverity  
  cmTrapEventLogType  
  cmTrapEventLogObjectClass  
  cmTrapEventLogClassId  
  cmTrapEventLogSeqNum  
  cmTrapEventLogTimeTag  

cmBoardRestart 1.3.6.1.4.1.1996.19
The reason code field indicates the reason for the restart.
TRAP-TYPE    
  cmTrapEventLogProbableCause  
  cmTrapEventLogText  
  cmTrapEventLogSeverity  
  cmTrapEventLogType  
  cmTrapEventLogObjectClass  
  cmTrapEventLogClassId  
  cmTrapEventLogSeqNum  
  cmTrapEventLogTimeTag  

cmCE200 1.3.6.1.4.1.1996.20
OBJECT IDENTIFIER    

cmFanFailure 1.3.6.1.4.1.1996.20
Indicates that the system fan has failed.
TRAP-TYPE    
  cmTrapEventLogProbableCause  
  cmTrapEventLogText  
  cmTrapEventLogSeverity  
  cmTrapEventLogType  
  cmTrapEventLogObjectClass  
  cmTrapEventLogClassId  
  cmTrapEventLogSeqNum  
  cmTrapEventLogTimeTag  

cmSystem 1.3.6.1.4.1.1996.20.1
OBJECT IDENTIFIER    

cmSysObjectClass 1.3.6.1.4.1.1996.20.1.1
This is the Copper Mountain object class of this system.
OBJECT-TYPE    
  INTEGER system(256)  

cmSysOperState 1.3.6.1.4.1.1996.20.1.2
This is the current operability state of this resource.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

cmSysMaster 1.3.6.1.4.1.1996.20.1.3
DEPRECATED. No longer supported.
OBJECT-TYPE    
  INTEGER  

cmSysTrapAddress 1.3.6.1.4.1.1996.20.1.4
Obsoleted 4/1/99. IP Address of the SNMP Manager to which traps are sent.
OBJECT-TYPE    
  IpAddress  

cmSysConfigFileName 1.3.6.1.4.1.1996.20.1.5
The FileName of the saved configuration file
OBJECT-TYPE    
  DisplayString  

cmSysCommand 1.3.6.1.4.1.1996.20.1.6
Setting this object issues command for the system to execute. A GET on this object is the last operator command issued.
OBJECT-TYPE    
  INTEGER none(1), readConfig(2), saveConfig(3), restart(4), takeover(5), relinquish(6)  

cmSysCommandStatus 1.3.6.1.4.1.1996.20.1.7
This is the status of the last operator-issued command.
OBJECT-TYPE    
  INTEGER none(1), pending(2), inprogress(3), aborted(4), succeeded(5), failed(6)  

cmSysVersion 1.3.6.1.4.1.1996.20.1.8
This is the system version, type major.minor
OBJECT-TYPE    
  DisplayString  

cmSysCalendarTime 1.3.6.1.4.1.1996.20.1.9
The calendar time on the system.
OBJECT-TYPE    
  DisplayString  

cmSysPrimaryPII 1.3.6.1.4.1.1996.20.1.10
This is the PII of the SCM acting as primary
OBJECT-TYPE    
  CmObjectPII  

cmSysSecondaryPII 1.3.6.1.4.1.1996.20.1.11
This is the PII of the SCM acting as secondary
OBJECT-TYPE    
  CmObjectPII  

cmSysRedundancy 1.3.6.1.4.1.1996.20.1.12
If enabled, the secondary can takeover as primary.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2), notAvailable(3)  

cmSysConfigSynch 1.3.6.1.4.1.1996.20.1.13
Current sate of system configuration: Saved indicates configuration is saved on both the Primary and Secondary SCMs for a redundant system; and on the local SCM for a non-redundant system. NotSaved indicates operator has made configuration changes, but not saved them.
OBJECT-TYPE    
  INTEGER saved(1), notSaved(2)  

cmSysMyPII 1.3.6.1.4.1.1996.20.1.14
This is the PII of the SCM to which you are currently attached.
OBJECT-TYPE    
  CmObjectPII  

cmSysShelfCount 1.3.6.1.4.1.1996.20.1.15
The number of shelves currently reporting as part of the system.
OBJECT-TYPE    
  INTEGER 1..4  

cmSysExpIpSubNet 1.3.6.1.4.1.1996.20.1.16
The IP address will be interpreted as a class C subnetwork for internal use in the system. Addresses from the subnetwork will be used to assign each expansion SCM an IP address to be used for loading. Operators must insure this address range does not conflict with other addresses assigned and provide any necessary security filtering to prevent external access. The format of the class C subnetwork should be: A.B.C.0 where A, B and C are (0-255).
OBJECT-TYPE    
  IpAddress  

cmBoard 1.3.6.1.4.1.1996.20.2
OBJECT IDENTIFIER    

cmBoardTable 1.3.6.1.4.1.1996.20.2.1
The Board Information table for Configuration and Management of Boards.
OBJECT-TYPE    
  SEQUENCE OF  
    CmBoardEntry

cmBoardEntry 1.3.6.1.4.1.1996.20.2.1.1
An entry in the Board table.
OBJECT-TYPE    
  CmBoardEntry  

cmBoardIndex 1.3.6.1.4.1.1996.20.2.1.1.1
An Unique index for the Board.
OBJECT-TYPE    
  INTEGER  

cmBoardObjectClass 1.3.6.1.4.1.1996.20.2.1.1.2
The value of this object defines the object class associated with this board. NOTE: For this object, only 'Board' and 'brd*' classes are used.
OBJECT-TYPE    
  INTEGER system(256), shelf(512), ce200Shelf(513), ce150Shelf(514), board(768), brdSystemControlModule(769), brdSDSL10xModule-1(770), brdSDSL10xModule(771), brdBufferControlModule(772), brdV35-Wan(773), brdSDSL30xModule(774), brdHSSI-WAN(775), brdDS3FR-WAN(776), brdSDSL30xModule-24(777), brdIDSLModule-24(778), brdDS3ATM-WAN(779), brdCopperBaySCM(780), brdLANModule(781), port(1024), portSDSL(1025), portEthernet(1026), portV35(1027), portRS232(1028), portHSSI(1029), portDS3FR-WAN(1030), portIDSL(1031), portDS3ATM-WAN(1032), link(1280), linkDSL(1281), linkEthernet(1282), linkFrameRelay(1283), linkVC(1284), linkATM(1285), interShelfTrunk(1286), cr(1792), cr201-10x(1793), cr201-30x(1794), cr201-SDSL(1795), netopia-SDSL(1798), cr201-IDSL(1799), cpe-SDSL(1801), cpe-IDSL(1802), operator(2049), service(2304), powerModule(2305), fanModule(2306)  

cmBoardOperState 1.3.6.1.4.1.1996.20.2.1.1.3
This gives the Operation-state of the Board.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

cmBoardUpTime 1.3.6.1.4.1.1996.20.2.1.1.4
This value indicates the elapsed time since the board last powered up.
OBJECT-TYPE    
  TimeTicks  

cmBoardFileName 1.3.6.1.4.1.1996.20.2.1.1.5
The name of the file downloaded to this board.
OBJECT-TYPE    
  DisplayString  

cmBoardFileDate 1.3.6.1.4.1.1996.20.2.1.1.6
The date/time that the downloaded file was built.
OBJECT-TYPE    
  DisplayString  

cmBoardHwType 1.3.6.1.4.1.1996.20.2.1.1.7
This is the system board type.
OBJECT-TYPE    
  INTEGER hwSystemControlModule(1), hwSDSL10xModule-1(2), hwBufferControlModule(4), hwV35-Wan(5), hwSDSL10xModule(6), hwSDSL30xModule(7), hwHSSI-WAN(9), hwDS3RFR-WAN(13), hwSDSL30xModule-24(14), hwIDSLModule-24(15), hwCopperBaySCM(19), hwLANModule(20), hwDS3ATM-WAN(21)  

cmBoardNumPorts 1.3.6.1.4.1.1996.20.2.1.1.8
This is the number of ports on this board.
OBJECT-TYPE    
  INTEGER  

cmBoardHwVersion 1.3.6.1.4.1.1996.20.2.1.1.9
This is the hardware version of this board described in the format .. For example: 1.0
OBJECT-TYPE    
  DisplayString  

cmBoardSwVersion 1.3.6.1.4.1.1996.20.2.1.1.10
This is the software version of this board described in the format ... For example, 1.0.6.
OBJECT-TYPE    
  DisplayString  

cmBoardPromVersion 1.3.6.1.4.1.1996.20.2.1.1.11
This is the PROM software version described in the format .. For example: 1.0.6
OBJECT-TYPE    
  DisplayString  

cmBoardRole 1.3.6.1.4.1.1996.20.2.1.1.12
This is the role of this board in the system.
OBJECT-TYPE    
  INTEGER active(1), systemMaster(2), shelfMaster(3), standby(4), primary(5), secondary(6)  

cmBoardConfigChange 1.3.6.1.4.1.1996.20.2.1.1.13
This is the calendar time when the configuration was last changed.
OBJECT-TYPE    
  DisplayString  

cmBoardCommand 1.3.6.1.4.1.1996.20.2.1.1.14
Lists the last operational command issued (get) or it issues (sets) a command as specified above .
OBJECT-TYPE    
  INTEGER restart(1), none(4)  

cmBoardSerialNumber 1.3.6.1.4.1.1996.20.2.1.1.15
This is the serial number of the board.
OBJECT-TYPE    
  DisplayString  

cmBoardClusterRole 1.3.6.1.4.1.1996.20.2.1.1.16
SCMs are either 'master' (have WAN interfaces) or 'expansion'. Redundant Bays have 1 'master' on each side (left and right). This object is marked as 'notApplicable' for all other boards.
OBJECT-TYPE    
  INTEGER notApplicable(1), master(2), expansion(3)  

cmBoardInformation 1.3.6.1.4.1.1996.20.2.1.1.17
This is additional information about this particular board in the system. The contents of the field are defined by the specific type of board.
OBJECT-TYPE    
  DisplayString  

cmIDSLBoardTable 1.3.6.1.4.1.1996.20.2.2
The addition information beyond that contained in the cmBoardTable required to configure and manage an IDSL Line Card.
OBJECT-TYPE    
  SEQUENCE OF  
    CmIDSLBoardEntry

cmIDSLBoardEntry 1.3.6.1.4.1.1996.20.2.2.1
An entry in the Board table.
OBJECT-TYPE    
  CmIDSLBoardEntry  

cmIDSLBoardIndex 1.3.6.1.4.1.1996.20.2.2.1.1
The value of this object indicates the combination of shelf, port and slot number (i.e ifIndex).
OBJECT-TYPE    
  CmObjectPII  

cmIDSLBoardTimingMode 1.3.6.1.4.1.1996.20.2.2.1.2
The value of this object defines the IDSL line card's timing mode as follows: internallyTimed - The IDSL line card provides an internally generated clock to all ports on the card. locallyTimed - the IDSL Line Card acquires it's clock from port #1 and distributes it to the all other ports on this card. networkTimedSlave - the IDSL Line Card aquires timing from the backplane. If the backplance clock is missing it provides internal timing to all ports on this card. networkTimedMaster - The IDSL Line Card aquires a clock according to the following protocol: a) aquire clock from port #1 and distribute it both locally and across the backplane. b) if step a) fails then aquire the clock from the backplane. c) if steps a) and b) both fail provide internal timing to all ports on this card. networkBackup - The IDSL Line Card aquires a clock for this shelf according to the following protocol: a) aquire clock from the backplane. b) if step a) fails then aquire the clock from port #1 and distribute this clock locally on this card and across the backplane. c) if steps a) and b) both fail provide internal timing to all ports on this card.
OBJECT-TYPE    
  INTEGER internallyTimed(1), locallyTimed(2), networkTimedSlave(3), networkTimedMaster(4), networkTimedBackup(5)  

cmIDSLBoardTimingStatus 1.3.6.1.4.1.1996.20.2.2.1.3
The value of this object indicates how the IDSL Line Card is currently deriving timing. (See TimingMode for a description of possible timing derivation scenarios). The possible values of cmIDSLBoardTimingStatus are as follows: internallyTimed - The IDSL Line Card is currently deriving timing for all of it's ports via internal timing. locallyTimed - The IDSL Line Card is currently aquiring network timing from it's port #1 and then distributing it to all ports on this card. networkTimedSlave - The IDSL Line Card is currently aquiring network timing from the backplane. networkTimedMaster - The IDSL Line Card is currently aquiring network timing from it's port #1 and then distributing it to all ports on this card aas well as the backplane.
OBJECT-TYPE    
  INTEGER internallyTimed(1), locallyTimed(2), networkTimedSlave(3), networkTimedMaster(4)  

cmIDSLBoardTimingAvailable 1.3.6.1.4.1.1996.20.2.2.1.4
This value indicates wether or not the IDSL Line Card's timing source is valid. The status values are defined as follows: yes - Indicates that this IDSL Line Card is configured as a Globally Timed Master or Globally Timed Backup, and port #1 on this IDSL Line Card is trained, e.g. it can acquire timing from port #1. no - Indicates that this IDSL Line Card is configured as a Globally Timed Master or Globally Timed Backup, and Port #1 on this IDSL Line Card is not trained, e.g. it cannot acquire a clock from port 1. A value of no can also indicate that there is no way to determine whether timing is available because this IDSL Line Card is either Locally Timed,Internally Timed, or Globally Timed Slave.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

cmState 1.3.6.1.4.1.1996.20.3
OBJECT IDENTIFIER    

cmStateTable 1.3.6.1.4.1.1996.20.3.1
The State Information table for the Control and Management of the State of System, Shelf, Board, Port and Link.
OBJECT-TYPE    
  SEQUENCE OF  
    CmStateEntry

cmStateEntry 1.3.6.1.4.1.1996.20.3.1.1
An entry in the DSL Port Information table.
OBJECT-TYPE    
  CmStateEntry  

cmStateGenericClass 1.3.6.1.4.1.1996.20.3.1.1.1
The value of this object is the generic object class of this resource.
OBJECT-TYPE    
  INTEGER system(256), shelf(512), board(768), port(1024), link(1280), support(2304)  

cmStateIndex 1.3.6.1.4.1.1996.20.3.1.1.2
The value of this object identifies the specific resource in the object class.
OBJECT-TYPE    
  INTEGER  

cmStateObjClass 1.3.6.1.4.1.1996.20.3.1.1.3
The value of this object indicates the Object class of the resource.
OBJECT-TYPE    
  INTEGER system(256), shelf(512), ce200Shelf(513), ce150Shelf(514), board(768), brdSystemControlModule(769), brdSDSL10xModule-1(770), brdSDSL10xModule(771), brdBufferControlModule(772), brdV35-Wan(773), brdSDSL30xModule(774), brdHSSI-WAN(775), brdDS3FR-WAN(776), brdSDSL30xModule-24(777), brdIDSLModule-24(778), brdDS3ATM-WAN(779), brdCopperBaySCM(780), brdLANModule(781), port(1024), portSDSL(1025), portEthernet(1026), portV35(1027), portRS232(1028), portHSSI(1029), portDS3FR-WAN(1030), portIDSL(1031), portDS3ATM-WAN(1032), link(1280), linkDSL(1281), linkEthernet(1282), linkFrameRelay(1283), linkVC(1284), linkATM(1285), interShelfTrunk(1286), cr(1792), cr201-10x(1793), cr201-30x(1794), cr201-SDSL(1795), netopia-SDSL(1798), cr201-IDSL(1799), cpe-SDSL(1801), cpe-IDSL(1802), operator(2049), service(2304), powerModule(2305), fanModule(2306)  

cmStateOperState 1.3.6.1.4.1.1996.20.3.1.1.4
The value of this object indicates the current operability state of the resource.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2), testing(3)  

cmStateLastChange 1.3.6.1.4.1.1996.20.3.1.1.5
This value indicates the value of uptime at last change.
OBJECT-TYPE    
  TimeTicks  

cmShelf 1.3.6.1.4.1.1996.20.4
OBJECT IDENTIFIER    

cmShelfTable 1.3.6.1.4.1.1996.20.4.1
The shelf information table for the control and management of the state of a shelf.
OBJECT-TYPE    
  SEQUENCE OF  
    CmShelfEntry

cmShelfEntry 1.3.6.1.4.1.1996.20.4.1.1
An entry in the shelf information table to contain configuration and status info specific to the shelf.
OBJECT-TYPE    
  CmShelfEntry  

cmShelfIndex 1.3.6.1.4.1.1996.20.4.1.1.1
The value of this object identifies the unique index for the shelf.
OBJECT-TYPE    
  CmObjectPII  

cmShelfObjectClass 1.3.6.1.4.1.1996.20.4.1.1.2
The value of this object identifies the Object class to which this shelf belongs. The object class identifies the physical packaging of the shelf. Below is a diagram of the ce200Shelf. NOTE: For this object, only 'shelf*' classes are used. | | | | | | | | | | | | | | | | | | | | |P |S |W |W |B |D |D |D |D |D |D |D |D |B |S |W |W |P | | |W |C |A |A |C |S |S |S |S |S |S |S |S |C |C |A |A |W | | |R |M |N |N |M |L |L |L |L |L |L |L |L |M |M |N |N |R | | | | | | | |M |M |M |M |M |M |M |M | | | | | | | slot 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
OBJECT-TYPE    
  INTEGER system(256), shelf(512), ce200Shelf(513), ce150Shelf(514), board(768), brdSystemControlModule(769), brdSDSL10xModule-1(770), brdSDSL10xModule(771), brdBufferControlModule(772), brdV35-Wan(773), brdSDSL30xModule(774), brdHSSI-WAN(775), brdDS3FR-WAN(776), brdSDSL30xModule-24(777), brdIDSLModule-24(778), brdDS3ATM-WAN(779), brdCopperBaySCM(780), brdLANModule(781), port(1024), portSDSL(1025), portEthernet(1026), portV35(1027), portRS232(1028), portHSSI(1029), portDS3FR-WAN(1030), portIDSL(1031), portDS3ATM-WAN(1032), link(1280), linkDSL(1281), linkEthernet(1282), linkFrameRelay(1283), linkVC(1284), linkATM(1285), interShelfTrunk(1286), cr(1792), cr201-10x(1793), cr201-30x(1794), cr201-SDSL(1795), netopia-SDSL(1798), cr201-IDSL(1799), cpe-SDSL(1801), cpe-IDSL(1802), operator(2049), service(2304), powerModule(2305), fanModule(2306)  

cmShelfOperability 1.3.6.1.4.1.1996.20.4.1.1.3
The value of this object identifies the current operability state of this shelf.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

cmShelfUpTime 1.3.6.1.4.1.1996.20.4.1.1.4
The value of this object indicates the elapsed since shelf was last powered up.
OBJECT-TYPE    
  TimeTicks  

cmShelfMaster 1.3.6.1.4.1.1996.20.4.1.1.5
The value of this object identifies the SCM board operating as the shelf master.
OBJECT-TYPE    
  INTEGER  

cmShelfBoardMap 1.3.6.1.4.1.1996.20.4.1.1.6
The value of this object is a bit map of boards in the shelf, for example bit 0 = Fan, bit 1 = slot1, bit 2 = slot 2 .
OBJECT-TYPE    
  OCTET STRING  

cmShelfCommand 1.3.6.1.4.1.1996.20.4.1.1.7
This object allows a single shelf to be restarted vs. restarting the entire system.
OBJECT-TYPE    
  INTEGER none(1), restart(2)  

cmShelfShelfNumber 1.3.6.1.4.1.1996.20.4.1.1.8
The value of this object indicates the configured position of this shelf. If the value of this object is set to one, it is configured to be the first shelf on the rack. If the value of this object is set to two, this shelf is the second shelf on the rack.
OBJECT-TYPE    
  INTEGER 1..4  

cmFile 1.3.6.1.4.1.1996.20.5
OBJECT IDENTIFIER    

cmFileBootDevice 1.3.6.1.4.1.1996.20.5.1
The value of this object is the type of Device that the system booted from.
OBJECT-TYPE    
  INTEGER flash(1), fileServer(2)  

cmFileFSName 1.3.6.1.4.1.1996.20.5.2
This is the name of the file server being used as a default for file operations for this system.
OBJECT-TYPE    
  DisplayString  

cmFileFSAddr 1.3.6.1.4.1.1996.20.5.3
IP Address of the remote file server that contains the CMN software. If the system doesn' find a requested file locally, it will attempt to load the specified file from this remote file server.
OBJECT-TYPE    
  IpAddress  

cmFileFSUsername 1.3.6.1.4.1.1996.20.5.4
This is the user name that will be used on all the FTP requests to the remote file server specified in cmFileFSAddr.
OBJECT-TYPE    
  DisplayString  

cmFileFSPassword 1.3.6.1.4.1.1996.20.5.5
This is the password that will be used on all FTP requests to the remote file server specified in cmFileFSAddr. When read back, this password will alwasys display ****.
OBJECT-TYPE    
  DisplayString  

cmFileFLASHDir 1.3.6.1.4.1.1996.20.5.6
This is the root directory path on the flash file server that contains the files for this system.
OBJECT-TYPE    
  DisplayString  

cmFileFSDir 1.3.6.1.4.1.1996.20.5.7
This is the base directory name that will be used for all requests to the remote FTP server specified in the cmFileFSAddr. An appropriate subdirectory name based on the same directory structure used in the flash will be appended to the base directory.
OBJECT-TYPE    
  DisplayString  

cmCpeBoard 1.3.6.1.4.1.1996.20.6
OBJECT IDENTIFIER    

cmCpeBoardTable 1.3.6.1.4.1.1996.20.6.1
Board Information table for Configuration and Management of CPE Boards.
OBJECT-TYPE    
  SEQUENCE OF  
    CmCpeBoardEntry

cmCpeBoardEntry 1.3.6.1.4.1.1996.20.6.1.1
An entry in the Board table.
OBJECT-TYPE    
  CmCpeBoardEntry  

cmCpeBoardIndex 1.3.6.1.4.1.1996.20.6.1.1.1
This is the PII of the CPE connected to the system. The decimal format is: fabbccdddd. Where f=1 for a CPE, a is the shelf, bb is the slot and cc is the port. dddd is always 0000 for a CPE.
OBJECT-TYPE    
  INTEGER  

cmCpeBoardObjectClass 1.3.6.1.4.1.1996.20.6.1.1.2
The value of this object defines the object class associated with this CPE. NOTE: For this object, only 'cr*' or 'netopia*' classes are used.
OBJECT-TYPE    
  INTEGER system(256), shelf(512), ce200Shelf(513), ce150Shelf(514), board(768), brdSystemControlModule(769), brdSDSL10xModule-1(770), brdSDSL10xModule(771), brdBufferControlModule(772), brdV35-Wan(773), brdSDSL30xModule(774), brdHSSI-WAN(775), brdDS3FR-WAN(776), brdSDSL30xModule-24(777), brdIDSLModule-24(778), brdDS3ATM-WAN(779), brdCopperBaySCM(780), brdLANModule(781), port(1024), portSDSL(1025), portEthernet(1026), portV35(1027), portRS232(1028), portHSSI(1029), portDS3FR-WAN(1030), portIDSL(1031), portDS3ATM-WAN(1032), link(1280), linkDSL(1281), linkEthernet(1282), linkFrameRelay(1283), linkVC(1284), linkATM(1285), interShelfTrunk(1286), cr(1792), cr201-10x(1793), cr201-30x(1794), cr201-SDSL(1795), netopia-SDSL(1798), cr201-IDSL(1799), cpe-SDSL(1801), cpe-IDSL(1802), operator(2049), service(2304), powerModule(2305), fanModule(2306)  

cmCpeBoardOperState 1.3.6.1.4.1.1996.20.6.1.1.3
This gives the Operability state of this CPE
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

cmCpeBoardUpTime 1.3.6.1.4.1.1996.20.6.1.1.4
This value indicates the elapsed time since the board last powered up.
OBJECT-TYPE    
  TimeTicks  

cmCpeBoardFileName 1.3.6.1.4.1.1996.20.6.1.1.5
The name of the file downloaded to this board.
OBJECT-TYPE    
  DisplayString  

cmCpeBoardFileDate 1.3.6.1.4.1.1996.20.6.1.1.6
The date/time that the downloaded code file was built.
OBJECT-TYPE    
  DisplayString  

cmCpeBoardHwType 1.3.6.1.4.1.1996.20.6.1.1.7
This is the hardware type of this CPE.
OBJECT-TYPE    
  INTEGER hwCR201-10x(3), hwCR201-30x(8), hwCR201-SDSL(10), hwNetopia-SDSL(16), hwCR201-IDSL(17), hwCPE-SDSL(22), hwCPE-IDSL(23)  

cmCpeBoardNumPorts 1.3.6.1.4.1.1996.20.6.1.1.8
This is the number of ports on this CPE.
OBJECT-TYPE    
  INTEGER  

cmCpeBoardHwVersion 1.3.6.1.4.1.1996.20.6.1.1.9
This is the hardware version of this board described in the format .. For example: 1.0
OBJECT-TYPE    
  DisplayString  

cmCpeBoardSwVersion 1.3.6.1.4.1.1996.20.6.1.1.10
This is the software version described in the format .. For example: 1.0.6
OBJECT-TYPE    
  DisplayString  

cmCpeBoardPromVersion 1.3.6.1.4.1.1996.20.6.1.1.11
This is the PROM software version described in the format .. For example: 1.0.6
OBJECT-TYPE    
  DisplayString  

cmCpeBoardConfigChange 1.3.6.1.4.1.1996.20.6.1.1.13
This is the calendar time when the configuration on this CPE was last changed.
OBJECT-TYPE    
  DisplayString  

cmCpeBoardCommand 1.3.6.1.4.1.1996.20.6.1.1.14
Lists the last operational command issued (GET) to the CPE or it issues (SETs) a command as specified above .
OBJECT-TYPE    
  INTEGER restart(1), erase(2), upgrade(3), none(4)  

cmCpeBoardSerialNumber 1.3.6.1.4.1.1996.20.6.1.1.15
This is the serial number of the CPE board.
OBJECT-TYPE    
  DisplayString  

cmCpeBoardVendorDescription 1.3.6.1.4.1.1996.20.6.1.1.16
The is a CPE supplied text string that identifies the type of CPE. This provides a way for a new CPE to be integrated with the system without requiring changes to the system itself.
OBJECT-TYPE    
  DisplayString  

cmCpeBoardGroupMap 1.3.6.1.4.1.1996.20.6.1.1.17
Each octet in this string contains a Group ID that identifies a Copper Mountain database/MIB group that this CPE supports. The supported database/MIB groups represented by different octet values are as follows: 56 = cmCpeHDSLModemTable 57 = cmCpeDSLIntervalTable 58 = cmCpeEthernetIntervalTable 64 = cmCpeBoardTable 97 = cmCpeIDSLModemTable 130 = cmCpeDataPortTable 131 = cmCpeDataPortIntervalTable 132 = cmCpeDataPortTotalTable
OBJECT-TYPE    
  OCTET STRING  

cmCpeBoardManagementOptions 1.3.6.1.4.1.1996.20.6.1.1.18
This is a bit mapped object that defines the management options supported by this CPE. Bit0 (LSB) - CMCP Software Download Flag. If this bit is 0, this CPE does NOT support download through CMCP. If this bit is 1, this CPE does support download through CMCP.
OBJECT-TYPE    
  INTEGER  

cmHSSI 1.3.6.1.4.1.1996.20.7
OBJECT IDENTIFIER    

cmHSSITable 1.3.6.1.4.1.1996.20.7.1
The HSSI Information table for Configuration and Management of HSSI ports.
OBJECT-TYPE    
  SEQUENCE OF  
    CmHSSIEntry

cmHSSIEntry 1.3.6.1.4.1.1996.20.7.1.1
An entry in the HSSI table.
OBJECT-TYPE    
  CmHSSIEntry  

cmHSSIIndex 1.3.6.1.4.1.1996.20.7.1.1.1
Unique identifier for this port described in the format ...
OBJECT-TYPE    
  INTEGER  

cmHSSIIfIndex 1.3.6.1.4.1.1996.20.7.1.1.2
The ifIndex value of this HSSI interface. The index must be greater than or equal to 1
OBJECT-TYPE    
  INTEGER  

cmHSSIDCEReady 1.3.6.1.4.1.1996.20.7.1.1.3
Input - indicates whether DCE is ready to transmit data.
OBJECT-TYPE    
  INTEGER not-ready(1), ready(2)  

cmHSSIDTEReady 1.3.6.1.4.1.1996.20.7.1.1.4
Output - indicates whether DTE is ready to transmit data.
OBJECT-TYPE    
  INTEGER not-ready(1), ready(2)  

cmHSSIDTEDCE 1.3.6.1.4.1.1996.20.7.1.1.5
Specifies the interface type of the port as DTE or DCE.
OBJECT-TYPE    
  INTEGER dte(1), dce(2)  

cmHSSILoopback 1.3.6.1.4.1.1996.20.7.1.1.6
Indicates the current loopback state of the DTE.
OBJECT-TYPE    
  INTEGER none(1), local-line(2), remote-line(3), local-digital(4)  

cmHSSITestmode 1.3.6.1.4.1.1996.20.7.1.1.7
Indicates the current loopback state of the DCE.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

cmHSSISync 1.3.6.1.4.1.1996.20.7.1.1.8
Indicated the presence(sync-on) or absence (sync-off) of HDLC flags.
OBJECT-TYPE    
  INTEGER sync-off(1), sync-on(2)  

cmHSSITxClockPresent 1.3.6.1.4.1.1996.20.7.1.1.9
Indicates whether the transmit clock is detected.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

cmHSSICRC 1.3.6.1.4.1.1996.20.7.1.1.10
The CRC format used on all frames received and transmitted by the HSSI-WAN module. Currently the HSSI-WAN module only supports CRC-16.
OBJECT-TYPE    
  INTEGER crc-16(2)  

cmHSSIClockRate 1.3.6.1.4.1.1996.20.7.1.1.11
The clock rate of port in bits per second (bps). The value of this object is supplied to this port by the connected equipment. The value of this object can only be altered when the frDlciLinkEnable is set to 'disabled'. The new value will not take effect until the value of the frDlciLinkEnable is set to 'enabled'. Example: 1544000
OBJECT-TYPE    
  INTEGER  

cmHSSIAdminState 1.3.6.1.4.1.1996.20.7.1.1.12
The administrative state of the HSSI port
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2), shutdown(3)  

cmHSSIOperState 1.3.6.1.4.1.1996.20.7.1.1.13
The operational state of the HSSI port
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

cmV35 1.3.6.1.4.1.1996.20.8
OBJECT IDENTIFIER    

cmV35Table 1.3.6.1.4.1.1996.20.8.1
The V.35 Information table for Configuration and Management of V.35 ports.
OBJECT-TYPE    
  SEQUENCE OF  
    CmV35Entry

cmV35Entry 1.3.6.1.4.1.1996.20.8.1.1
An entry in the V.35 table.
OBJECT-TYPE    
  CmV35Entry  

cmV35Index 1.3.6.1.4.1.1996.20.8.1.1.1
Unique identifier for this port described in the format ...
OBJECT-TYPE    
  INTEGER  

cmV35IfIndex 1.3.6.1.4.1.1996.20.8.1.1.2
The ifIndex associated with this port.
OBJECT-TYPE    
  INTEGER  

cmV35DSR 1.3.6.1.4.1.1996.20.8.1.1.3
Indicates the current state of the DSR input signal
OBJECT-TYPE    
  INTEGER off(1), on(2)  

cmV35DCD 1.3.6.1.4.1.1996.20.8.1.1.4
Indicates the current state of the DTE input signal.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

cmV35CTS 1.3.6.1.4.1.1996.20.8.1.1.5
Indicates the current state of the CTS input signal.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

cmV35DTR 1.3.6.1.4.1.1996.20.8.1.1.6
Indicates the current state of the DTR output signal.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

cmV35RTS 1.3.6.1.4.1.1996.20.8.1.1.7
Indicates the current state of the RTS output signal.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

cmV35DTEDCE 1.3.6.1.4.1.1996.20.8.1.1.8
Indicates whether the port is operating as a DCE or a DTE.
OBJECT-TYPE    
  INTEGER dte(1), dce(2)  

cmV35Sync 1.3.6.1.4.1.1996.20.8.1.1.9
If on, indicates the presence of HLDC flags on the physical link.
OBJECT-TYPE    
  INTEGER sync-off(1), sync-on(2)  

cmV35TxClockSource 1.3.6.1.4.1.1996.20.8.1.1.10
Indicates the whether the transmit clock source is internal or external port.
OBJECT-TYPE    
  INTEGER clock-ext(1), clock-int(2)  

cmV35CRC 1.3.6.1.4.1.1996.20.8.1.1.11
Indicates the type of Cyclical Redundancy Check (CRC) format used on the transmitted from this port.
OBJECT-TYPE    
  INTEGER crc-CCITT(1)  

cmV35ClockRate 1.3.6.1.4.1.1996.20.8.1.1.12
The clock rate of port in bits per second (bps). Example: 1544000
OBJECT-TYPE    
  INTEGER  

cmV35AdminState 1.3.6.1.4.1.1996.20.8.1.1.13
The administrative state of the V.35 port
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2), shutdown(3)  

cmV35OperState 1.3.6.1.4.1.1996.20.8.1.1.14
The operational state of the V.35 port
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

cmTrap 1.3.6.1.4.1.1996.20.9
OBJECT IDENTIFIER    

cmTrapEventSeqNum 1.3.6.1.4.1.1996.20.9.1
This object specifies the sequence number of the most recent event.
OBJECT-TYPE    
  INTEGER  

cmTrapCriticalAlarmCount 1.3.6.1.4.1.1996.20.9.2
This object specifies the number of uncleared critical alarms.
OBJECT-TYPE    
  INTEGER  

cmTrapMajorAlarmCount 1.3.6.1.4.1.1996.20.9.3
This object specifies the number of uncleared major alarms.
OBJECT-TYPE    
  INTEGER  

cmTrapMinorAlarmCount 1.3.6.1.4.1.1996.20.9.4
This object specifies the number of uncleared minor alarms.
OBJECT-TYPE    
  INTEGER  

cmTrapWarningCount 1.3.6.1.4.1.1996.20.9.5
This object specifies the number of uncleared warnings.
OBJECT-TYPE    
  INTEGER  

cmTrapReceiverTable 1.3.6.1.4.1.1996.20.9.6
Obsoleted 4/1/99. This table contains the address and security information for all SNMP managers that are configured to received traps from the system.
OBJECT-TYPE    
  SEQUENCE OF  
    CmTrapReceiverEntry

cmTrapReceiverEntry 1.3.6.1.4.1.1996.20.9.6.1
Obsoleted 4/1/99. An entry in the trap receiver table.
OBJECT-TYPE    
  CmTrapReceiverEntry  

cmTrapReceiverIPAddr 1.3.6.1.4.1.1996.20.9.6.1.1
Obsoleted 4/1/99. The value of this object specifies the IP Address of the manager that is to receive traps
OBJECT-TYPE    
  IpAddress  

cmTrapReceiverPort 1.3.6.1.4.1.1996.20.9.6.1.2
Obsoleted 4/1/99. This object specifies the IP port number of the manager that is to receive traps.
OBJECT-TYPE    
  INTEGER  

cmTrapReceiverCommunity 1.3.6.1.4.1.1996.20.9.6.1.3
Obsoleted 4/1/99. This object specifies the community string for the manager that is to receive traps.
OBJECT-TYPE    
  DisplayString  

cmTrapReceiverRowStatus 1.3.6.1.4.1.1996.20.9.6.1.4
Obsoleted 4/1/99. This object controls the creation and deletion of a row in the trap receiver table.
OBJECT-TYPE    
  INTEGER active(1), notInService(2), create(4), createAndWait(5), delete(6)  

cmTrapReceiverOwnerString 1.3.6.1.4.1.1996.20.9.6.1.5
Obsoleted 4/1/99. The object specifies additional textual information used to identify and describe the manager that is to receive traps.
OBJECT-TYPE    
  DisplayString  

cmTrapEventLogTable 1.3.6.1.4.1.1996.20.9.7
This table contains the 1000 most recent events.
OBJECT-TYPE    
  SEQUENCE OF  
    CmTrapEventLogEntry

cmTrapEventLogEntry 1.3.6.1.4.1.1996.20.9.7.1
An entry in the event log table.
OBJECT-TYPE    
  CmTrapEventLogEntry  

cmTrapEventLogSeqNum 1.3.6.1.4.1.1996.20.9.7.1.1
The sequence number of this entry in the event table.
OBJECT-TYPE    
  INTEGER  

cmTrapEventLogType 1.3.6.1.4.1.1996.20.9.7.1.2
This object specifies the type of event.
OBJECT-TYPE    
  INTEGER coldStart(1), boardDown(2), boardUp(3), linkDown(4), linkUp(5), loginFailed(6), loginSucceeded(7), loginsSaturated(8), loginsAvailable(9), loginSuspended(10), loginAllowed(11), bootFileFail(12), bootFileSucceeded(13), logout(14), attributeChanged(15), configReadFail(16), configReadSucceed(17), configWriteFail(18), configWriteSucceed(19), stateChange(20), dLCIStateDisabled(21), dLCIStateEnabled(22), diagnostic(23), boardRestart(24), fanFault(25), fanFaultClear(26), powerSupplyFault(27), powerSupplyClear(28), testStatus(29), testError(30), loopStatusChange(31), risingThresholdAlert(32), ds3LineStatusAlarm(33), ds3LineStatusClear(34), idslTimingLossAlarm(35), idslTimingLossClear(36), redundancyChanged(37), roleChanged(38), redundancyConflict(39), maintSucceed(40), maintFailed(41), fallingThresholdAlert(42), rateFallbackAlarm(43), rateFallbackClear(44), endPointConflictAlarm(47)  

cmTrapEventLogObjectClass 1.3.6.1.4.1.1996.20.9.7.1.3
The value of this field indicates the system Object Class associated with the resource reporting the event.
OBJECT-TYPE    
  INTEGER system(256), shelf(512), ce200Shelf(513), ce150Shelf(514), board(768), brdSystemControlModule(769), brdSDSL10xModule-1(770), brdSDSL10xModule(771), brdBufferControlModule(772), brdV35-Wan(773), brdSDSL30xModule(774), brdHSSI-WAN(775), brdDS3FR-WAN(776), brdSDSL30xModule-24(777), brdIDSLModule-24(778), brdDS3ATM-WAN(779), brdCopperBaySCM(780), brdLANModule(781), port(1024), portSDSL(1025), portEthernet(1026), portV35(1027), portRS232(1028), portHSSI(1029), portDS3FR-WAN(1030), portIDSL(1031), portDS3ATM-WAN(1032), link(1280), linkDSL(1281), linkEthernet(1282), linkFrameRelay(1283), linkVC(1284), linkATM(1285), interShelfTrunk(1286), cr(1792), cr201-10x(1793), cr201-30x(1794), cr201-SDSL(1795), netopia-SDSL(1798), cr201-IDSL(1799), cpe-SDSL(1801), cpe-IDSL(1802), operator(2049), service(2304), powerModule(2305), fanModule(2306)  

cmTrapEventLogClassId 1.3.6.1.4.1.1996.20.9.7.1.4
This object specifies the object class that generated the event.
OBJECT-TYPE    
  CmObjectPII  

cmTrapEventLogProbableCause 1.3.6.1.4.1.1996.20.9.7.1.5
This object specifies the probable cause of the event.
OBJECT-TYPE    
  INTEGER  

cmTrapEventLogSeverity 1.3.6.1.4.1.1996.20.9.7.1.6
The value of this field indicates the severity assigned to this event by the system.
OBJECT-TYPE    
  INTEGER none(1), information(2), warning(3), minor(4), major(5), critical(6)  

cmTrapEventLogTimeTag 1.3.6.1.4.1.1996.20.9.7.1.7
This object specifies the time that the event occurred.
OBJECT-TYPE    
  DisplayString  

cmTrapEventLogText 1.3.6.1.4.1.1996.20.9.7.1.8
This object contains any additional information need to describe the event.
OBJECT-TYPE    
  DisplayString  

cmTrapAlarmLogTable 1.3.6.1.4.1.1996.20.9.8
This table contains the 1000 most recent outstanding alarms.
OBJECT-TYPE    
  SEQUENCE OF  
    CmTrapAlarmLogEntry

cmTrapAlarmLogEntry 1.3.6.1.4.1.1996.20.9.8.1
An entry in the alarm log table.
OBJECT-TYPE    
  CmTrapAlarmLogEntry  

cmTrapAlarmLogSeqNum 1.3.6.1.4.1.1996.20.9.8.1.1
The sequence number of this entry in the alarm table.
OBJECT-TYPE    
  INTEGER  

cmTrapAlarmLogType 1.3.6.1.4.1.1996.20.9.8.1.2
This object specifies the type of alarm.
OBJECT-TYPE    
  INTEGER coldStart(1), boardDown(2), boardUp(3), linkDown(4), linkUp(5), loginFailed(6), loginSucceeded(7), loginsSaturated(8), loginsAvailable(9), loginSuspended(10), loginAllowed(11), bootFileFail(12), bootFileSucceeded(13), logout(14), attributeChanged(15), configReadFail(16), configReadSucceed(17), configWriteFail(18), configWriteSucceed(19), stateChange(20), dLCIStateDisabled(21), dLCIStateEnabled(22), diagnostic(23), boardRestart(24), fanFault(25), fanFaultClear(26), powerSupplyFault(27), powerSupplyClear(28), testStatus(29), testError(30), loopStatusChange(31), risingThresholdAlert(32), ds3LineStatusAlarm(33), ds3LineStatusClear(34), idslTimingLossAlarm(35), idslTimingLossClear(36), redundancyChanged(37), roleChanged(38), redundancyConflict(39), maintSucceed(40), maintFailed(41), fallingThresholdAlert(42), rateFallbackAlarm(43), rateFallbackClear(44), endPointConflictAlarm(47)  

cmTrapAlarmLogObjectClass 1.3.6.1.4.1.1996.20.9.8.1.3
The value of this field indicates the system Object Class associated with the resource reporting the event.
OBJECT-TYPE    
  INTEGER system(256), shelf(512), ce200Shelf(513), ce150Shelf(514), board(768), brdSystemControlModule(769), brdSDSL10xModule-1(770), brdSDSL10xModule(771), brdBufferControlModule(772), brdV35-Wan(773), brdSDSL30xModule(774), brdHSSI-WAN(775), brdDS3FR-WAN(776), brdSDSL30xModule-24(777), brdIDSLModule-24(778), brdDS3ATM-WAN(779), brdCopperBaySCM(780), brdLANModule(781), port(1024), portSDSL(1025), portEthernet(1026), portV35(1027), portRS232(1028), portHSSI(1029), portDS3FR-WAN(1030), portIDSL(1031), portDS3ATM-WAN(1032), link(1280), linkDSL(1281), linkEthernet(1282), linkFrameRelay(1283), linkVC(1284), linkATM(1285), interShelfTrunk(1286), cr(1792), cr201-10x(1793), cr201-30x(1794), cr201-SDSL(1795), netopia-SDSL(1798), cr201-IDSL(1799), cpe-SDSL(1801), cpe-IDSL(1802), operator(2049), service(2304), powerModule(2305), fanModule(2306)  

cmTrapAlarmLogClassId 1.3.6.1.4.1.1996.20.9.8.1.4
This object specifies the object class that generated the alarm.
OBJECT-TYPE    
  CmObjectPII  

cmTrapAlarmLogProbableCause 1.3.6.1.4.1.1996.20.9.8.1.5
This object specifies the probable cause of the alarm.
OBJECT-TYPE    
  INTEGER  

cmTrapAlarmLogSeverity 1.3.6.1.4.1.1996.20.9.8.1.6
The value of this field indicates the severity assigned to this event by the system.
OBJECT-TYPE    
  INTEGER none(1), information(2), warning(3), minor(4), major(5), critical(6)  

cmTrapAlarmLogTimeTag 1.3.6.1.4.1.1996.20.9.8.1.7
This object specifies the time that the alarm occurred.
OBJECT-TYPE    
  DisplayString  

cmTrapAlarmLogText 1.3.6.1.4.1.1996.20.9.8.1.8
This object contains any additional information need to describe the event.
OBJECT-TYPE    
  DisplayString  

cmTrapTypeLogTable 1.3.6.1.4.1.1996.20.9.9
This table contains the 1000 most recent events sorted first by internal event type, and second by sequence number.
OBJECT-TYPE    
  SEQUENCE OF  
    CmTrapTypeLogEntry

cmTrapTypeLogEntry 1.3.6.1.4.1.1996.20.9.9.1
An entry in the Trap Type log table.
OBJECT-TYPE    
  CmTrapTypeLogEntry  

cmTrapTypeLogType 1.3.6.1.4.1.1996.20.9.9.1.1
This object specifies the type of event.
OBJECT-TYPE    
  INTEGER coldStart(1), boardDown(2), boardUp(3), linkDown(4), linkUp(5), loginFailed(6), loginSucceeded(7), loginsSaturated(8), loginsAvailable(9), loginSuspended(10), loginAllowed(11), bootFileFail(12), bootFileSucceeded(13), logout(14), attributeChanged(15), configReadFail(16), configReadSucceed(17), configWriteFail(18), configWriteSucceed(19), stateChange(20), dLCIStateDisabled(21), dLCIStateEnabled(22), diagnostic(23), boardRestart(24), fanFault(25), fanFaultClear(26), powerSupplyFault(27), powerSupplyClear(28), testStatus(29), testError(30), loopStatusChange(31), risingThresholdAlert(32), ds3LineStatusAlarm(33), ds3LineStatusClear(34), idslTimingLossAlarm(35), idslTimingLossClear(36), redundancyChanged(37), roleChanged(38), redundancyConflict(39), maintSucceed(40), maintFailed(41), fallingThresholdAlert(42), rateFallbackAlarm(43), rateFallbackClear(44), endPointConflictAlarm(47)  

cmTrapTypeLogSeqNum 1.3.6.1.4.1.1996.20.9.9.1.2
The sequence number of this entry in the event table.
OBJECT-TYPE    
  INTEGER  

cmTrapTypeLogObjectClass 1.3.6.1.4.1.1996.20.9.9.1.3
The value of this field indicates the system Object Class associated with the resource reporting the event.
OBJECT-TYPE    
  INTEGER system(256), shelf(512), ce200Shelf(513), ce150Shelf(514), board(768), brdSystemControlModule(769), brdSDSL10xModule-1(770), brdSDSL10xModule(771), brdBufferControlModule(772), brdV35-Wan(773), brdSDSL30xModule(774), brdHSSI-WAN(775), brdDS3FR-WAN(776), brdSDSL30xModule-24(777), brdIDSLModule-24(778), brdDS3ATM-WAN(779), brdCopperBaySCM(780), brdLANModule(781), port(1024), portSDSL(1025), portEthernet(1026), portV35(1027), portRS232(1028), portHSSI(1029), portDS3FR-WAN(1030), portIDSL(1031), portDS3ATM-WAN(1032), link(1280), linkDSL(1281), linkEthernet(1282), linkFrameRelay(1283), linkVC(1284), linkATM(1285), interShelfTrunk(1286), cr(1792), cr201-10x(1793), cr201-30x(1794), cr201-SDSL(1795), netopia-SDSL(1798), cr201-IDSL(1799), cpe-SDSL(1801), cpe-IDSL(1802), operator(2049), service(2304), powerModule(2305), fanModule(2306)  

cmTrapTypeLogClassId 1.3.6.1.4.1.1996.20.9.9.1.4
This object specifies the object class that generated the event.
OBJECT-TYPE    
  CmObjectPII  

cmTrapTypeLogProbableCause 1.3.6.1.4.1.1996.20.9.9.1.5
This object specifies the probable cause of the event.
OBJECT-TYPE    
  INTEGER  

cmTrapTypeLogSeverity 1.3.6.1.4.1.1996.20.9.9.1.6
The value of this field indicates the severity assigned to this event by the system.
OBJECT-TYPE    
  INTEGER none(1), information(2), warning(3), minor(4), major(5), critical(6)  

cmTrapTypeLogTimeTag 1.3.6.1.4.1.1996.20.9.9.1.7
This object specifies the time that the event occurred.
OBJECT-TYPE    
  DisplayString  

cmTrapTypeLogText 1.3.6.1.4.1.1996.20.9.9.1.8
This object contains any additional information need to describe the event.
OBJECT-TYPE    
  DisplayString  

cmTrapDestinationTable 1.3.6.1.4.1.1996.20.9.10
This table is used by operators to configure the system to send traps to a particular management station. In our current implementation, the system sends all traps to all active (i.e. RowStatus=Active) receivers.
OBJECT-TYPE    
  SEQUENCE OF  
    CmTrapDestinationEntry

cmTrapDestinationEntry 1.3.6.1.4.1.1996.20.9.10.1
An entry in the Trap Destination table.
OBJECT-TYPE    
  CmTrapDestinationEntry  

cmTrapDestinationIpAddr 1.3.6.1.4.1.1996.20.9.10.1.1
This is the IP Address that the system will use when sending traps to this receiver. This is the first index into this table.
OBJECT-TYPE    
  IpAddress  

cmTrapDestinationPort 1.3.6.1.4.1.1996.20.9.10.1.2
This is the IP Port that this system will use when sending traps to this receiver. The standard SNMP Trap port is 162. This is the second index into this table.
OBJECT-TYPE    
  INTEGER  

cmTrapDestinationCommunity 1.3.6.1.4.1.1996.20.9.10.1.3
This is the community name to put into trap messages to this trap receiver. Default: ''
OBJECT-TYPE    
  DisplayString  

cmTrapDestinationRowStatus 1.3.6.1.4.1.1996.20.9.10.1.4
This is a field that controls the creation/deletion of entries in this table. Rows can be created by setting the RowStatus to Active or NotInService. The resulting entry will retain the entered state. Rows are deleted by entering a RowStatus of Destroy. The system will not send traps to a trap receiver whose RowStatus is NotInService. Default: Active
OBJECT-TYPE    
  INTEGER active(1), notInService(2), delete(6)  

cmTrapDestinationOwnerString 1.3.6.1.4.1.1996.20.9.10.1.5
The object specifies additional textual information used to identify and describe the manager that is to receive traps. Default: ''
OBJECT-TYPE    
  DisplayString  

cmLoop 1.3.6.1.4.1.1996.20.10
OBJECT IDENTIFIER    

cmLoopID 1.3.6.1.4.1.1996.20.10.1
This is the unique identifier for the loopback test to be performed.
OBJECT-TYPE    
  INTEGER  

cmLoopInterface 1.3.6.1.4.1.1996.20.10.2
The value of this object identifies the interface to test. The interface is identified by the shelf, slot, port and user channel.
OBJECT-TYPE    
  INTEGER  

cmLoopType 1.3.6.1.4.1.1996.20.10.3
This is the type of loopback test to performed.
OBJECT-TYPE    
  INTEGER noLoop(1), scm-DSLModulePort(2), scm-CR-Eth(3), scm-CPE-BER(5), scm-WAN-LocalDigital(7), scm-WAN-LocalLine(8), scm-WAN-RemoteLine(9), scm-WAN-Generator(10), scm-DSLModuleEOC(11)  

cmLoopAction 1.3.6.1.4.1.1996.20.10.4
The action to perform on the loopback test.
OBJECT-TYPE    
  INTEGER init(2), start(3), stop(4)  

cmLoopDuration 1.3.6.1.4.1.1996.20.10.5
The number of seconds to allow the loopback test to run.
OBJECT-TYPE    
  INTEGER  

cmLoopStatus 1.3.6.1.4.1.1996.20.10.6
The status of the loopback test in progress.
OBJECT-TYPE    
  INTEGER idle(1), inProgress(2), done(3)  

cmLoopTimeElapsed 1.3.6.1.4.1.1996.20.10.7
This is the number of seconds that have elapsed since the loopback test was started.
OBJECT-TYPE    
  TimeTicks  

cmLoopTermCode 1.3.6.1.4.1.1996.20.10.8
This is the test termination code. It specifies why the loopback test was terminated.
OBJECT-TYPE    
  INTEGER inProgress(1), dbSendError(2), durationExpired(3), operatorStopped(4), noLCresponse(5), noCPEresponse(6), lcInitError(7), cpeInitError(8), cpeStartError(9), lcSstartError(10), cpeDisabled(11), lcDisabled(12), noLinkStateChange(13), idle(14), mioInitError(15), mioDisabled(16), noMIOResponse(17), lcReportError(18), berCountOverflow(19)  

cmLoopTxCount 1.3.6.1.4.1.1996.20.10.9
The number of packets transmitted during the test.
OBJECT-TYPE    
  INTEGER  

cmLoopRxErrors 1.3.6.1.4.1.1996.20.10.10
The number of errored packets received during the test.
OBJECT-TYPE    
  INTEGER  

cmLoopOwnerString 1.3.6.1.4.1.1996.20.10.11
This string identifies the operator controlling the test.
OBJECT-TYPE    
  DisplayString  

cmLoopHistTable 1.3.6.1.4.1.1996.20.10.12
This table is used to store the history records from the previous loopback tests. A maximum of history 10 records are stored.
OBJECT-TYPE    
  SEQUENCE OF  
    CmLoopHistEntry

cmLoopHistEntry 1.3.6.1.4.1.1996.20.10.12.1
An entry in the loopback test history table.
OBJECT-TYPE    
  CmLoopHistEntry  

cmLoopHistID 1.3.6.1.4.1.1996.20.10.12.1.1
This is the unique identifier for the loopback test that was performed.
OBJECT-TYPE    
  INTEGER  

cmLoopHistInterface 1.3.6.1.4.1.1996.20.10.12.1.2
The value of this object identifies the interface that was tested. The interface is identified by the shelf, slot, port and user channel.
OBJECT-TYPE    
  INTEGER  

cmLoopHistType 1.3.6.1.4.1.1996.20.10.12.1.3
This is the type of loopback test that was performed.
OBJECT-TYPE    
  INTEGER noLoop(1), scm-DSLModulePort(2), scm-CR-Eth(3), scm-CPE-BER(5), scm-WAN-LocalDigital(7), scm-WAN-LocalLine(8), scm-WAN-RemoteLine(9), scm-WAN-Generator(10), scm-DSLModuleEOC(11)  

cmLoopHistAction 1.3.6.1.4.1.1996.20.10.12.1.4
The last action that was performed on the loopback test.
OBJECT-TYPE    
  INTEGER init(2), start(3), stop(4)  

cmLoopHistDuration 1.3.6.1.4.1.1996.20.10.12.1.5
The number of seconds that the loopback test was allowed to run.
OBJECT-TYPE    
  INTEGER  

cmLoopHistStatus 1.3.6.1.4.1.1996.20.10.12.1.6
The status of the loopback test.
OBJECT-TYPE    
  INTEGER idle(1), inProgress(2), done(3)  

cmLoopHistTimeElapsed 1.3.6.1.4.1.1996.20.10.12.1.7
This is the number of seconds that elapsed for the duration of the loopback test.
OBJECT-TYPE    
  TimeTicks  

cmLoopHistTermCode 1.3.6.1.4.1.1996.20.10.12.1.8
This is the test termination code. It specifies why the loopback test was terminated.
OBJECT-TYPE    
  INTEGER inProgress(1), dbSendError(2), durationExpired(3), operatorStopped(4), noLCresponse(5), noCPEresponse(6), lcInitError(7), cpeInitError(8), cpeStartError(9), lcSstartError(10), cpeDisabled(11), lcDisabled(12), noLinkStateChange(13), idle(14), mioInitError(15), mioDisabled(16), noMIOResponse(17), lcReportError(18), berCountOverflow(19)  

cmLoopHistTxCount 1.3.6.1.4.1.1996.20.10.12.1.9
The number of packets transmitted during the test.
OBJECT-TYPE    
  INTEGER  

cmLoopHistRxErrors 1.3.6.1.4.1.1996.20.10.12.1.10
The number of errored packets received during the test.
OBJECT-TYPE    
  INTEGER  

cmLoopHistOwnerString 1.3.6.1.4.1.1996.20.10.12.1.11
This string identifies the operator that controlled the test.
OBJECT-TYPE    
  DisplayString  

cmLoopHistTestParameter1 1.3.6.1.4.1.1996.20.10.12.1.12
The value of this object is test type dependent. For the EOC loopback test type, it specifies the address of the network element to loop back to the system. Valid values are 0-6. A value of 0 always addresses the NT (CPE) and values 1-6 indicate the number of hops away from the LT (Line Card).
OBJECT-TYPE    
  INTEGER 0..2147483647  

cmLoopHistErrorInfo 1.3.6.1.4.1.1996.20.10.12.1.13
The value of this object is card dependent. It is a method to specify more additional error status to the operator.
OBJECT-TYPE    
  INTEGER none(1), illegalTestParameter1(2), modemIsNT(3), modemUntrained(4), eocAddr2Big(5)  

cmLoopTestParameter1 1.3.6.1.4.1.1996.20.10.13
The value of this object is test type dependent. For the EOC loopback test type, it specifies the address of the network element to loop back to the system. Valid values are 0-6. A value of 0 always addresses the NT (CPE) and values 1-6 indicate the number of hops away from the LT (Line Card).
OBJECT-TYPE    
  INTEGER 0..2147483647  

cmLoopErrorInfo 1.3.6.1.4.1.1996.20.10.14
The value of this object is card dependent. It is a method to specify more additional error status to the operator.
OBJECT-TYPE    
  INTEGER none(1), illegalTestParameter1(2), modemIsNT(3), modemUntrained(4), eocAddr2Big(5)  

cmVBridge 1.3.6.1.4.1.1996.20.11
OBJECT IDENTIFIER    

cmVBridgeTable 1.3.6.1.4.1.1996.20.11.1
The virtual bridge table.
OBJECT-TYPE    
  SEQUENCE OF  
    CmVBridgeEntry

cmVBridgeEntry 1.3.6.1.4.1.1996.20.11.1.1
An entry in the cmVBridge table.
OBJECT-TYPE    
  CmVBridgeEntry  

cmVBridgePII 1.3.6.1.4.1.1996.20.11.1.1.1
The value of this object identifies the network interface from the shelf, slot, port and user channel. PII stands for Permanent Interface Identifier.
OBJECT-TYPE    
  INTEGER  

cmVBridgeNMAC 1.3.6.1.4.1.1996.20.11.1.1.2
The number of MAC entries in the bridge.
OBJECT-TYPE    
  INTEGER  

cmVBridgeNMulticast 1.3.6.1.4.1.1996.20.11.1.1.3
The number of multicast frames from the MIO or Ethernet.
OBJECT-TYPE    
  INTEGER  

cmVBridgeNUnicast 1.3.6.1.4.1.1996.20.11.1.1.4
The number of unicast frames from the MIO or Ethernet.
OBJECT-TYPE    
  INTEGER  

cmVBridgeNDSL 1.3.6.1.4.1.1996.20.11.1.1.5
The number of frames from DSL.
OBJECT-TYPE    
  INTEGER  

cmVBridgeNUnknownDest 1.3.6.1.4.1.1996.20.11.1.1.6
The number of unnown destinations that have been dropped.
OBJECT-TYPE    
  INTEGER  

cmVBridgeNOverflow 1.3.6.1.4.1.1996.20.11.1.1.7
The number of unlearned MACs (table full).
OBJECT-TYPE    
  INTEGER  

cmVBridgeOption 1.3.6.1.4.1.1996.20.11.1.1.8
Optional bridge function.
OBJECT-TYPE    
  INTEGER none(1), ipSpecial(2)  

cmMAC 1.3.6.1.4.1.1996.20.12
OBJECT IDENTIFIER    

cmMACTable 1.3.6.1.4.1.1996.20.12.1
This table displays the learned host Ethernet MAC addresses for each VWAN-bridge group.
OBJECT-TYPE    
  SEQUENCE OF  
    CmMACEntry

cmMACEntry 1.3.6.1.4.1.1996.20.12.1.1
An entry in the CM MAC table.
OBJECT-TYPE    
  CmMACEntry  

cmMACPII 1.3.6.1.4.1.1996.20.12.1.1.1
VWAN-bridge Group Identifier. This is the PII for the WAN VC uplink of the Group.
OBJECT-TYPE    
  INTEGER  

cmMACIndex 1.3.6.1.4.1.1996.20.12.1.1.2
Arbitrary index within a Bridge Group for this entry in the MAC table.
OBJECT-TYPE    
  INTEGER  

cmMACMAC 1.3.6.1.4.1.1996.20.12.1.1.3
MAC address of this host's Ethernet interface.
OBJECT-TYPE    
  OCTET STRING  

cmMACTTL 1.3.6.1.4.1.1996.20.12.1.1.4
Minutes to live before aging out.
OBJECT-TYPE    
  INTEGER  

cmMACDslPII 1.3.6.1.4.1.1996.20.12.1.1.5
PII of this host's DSL interface.
OBJECT-TYPE    
  INTEGER  

cmAlarm 1.3.6.1.4.1.1996.20.13
OBJECT IDENTIFIER    

cmAlarmTable 1.3.6.1.4.1.1996.20.13.1
A list of alarm entries.
OBJECT-TYPE    
  SEQUENCE OF  
    CmAlarmEntry

cmAlarmEntry 1.3.6.1.4.1.1996.20.13.1.1
A list of parameters that set up a periodic checking for alarm conditions. For example, an instance of the alarmValue object might be named alarmValue.8
OBJECT-TYPE    
  CmAlarmEntry  

cmAlarmIndex 1.3.6.1.4.1.1996.20.13.1.1.1
An index that uniquely identifies an entry in the alarm table. Each such entry defines a diagnostic sample at a particular interval for an object on the device.
OBJECT-TYPE    
  INTEGER 1..65535  

cmAlarmInterval 1.3.6.1.4.1.1996.20.13.1.1.2
The interval in seconds over which the data is sampled and compared with the rising and falling thresholds.
OBJECT-TYPE    
  INTEGER  

cmAlarmVariable 1.3.6.1.4.1.1996.20.13.1.1.3
The object identifier of the particular variable to be sampled. Only variables that resolve to an ASN.1 primitive type of INTEGER (INTEGER, Counter, Gauge, or TimeTicks) may be sampled. Because SNMP access control is articulated entirely in terms of the contents of MIB views, no access control mechanism exists that can restrict the value of this object to identify only those objects that exist in a particular MIB view. Because there is thus no acceptable means of restricting the read access that could be obtained through the alarm mechanism, the probe must only grant write access to this object in those views that have read access to all objects on the probe.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

cmAlarmSampleType 1.3.6.1.4.1.1996.20.13.1.1.4
The method of sampling the selected variable and calculating the value to be compared against the thresholds. If the value of this object is absoluteValue(1), the value of the selected variable will be compared directly with the thresholds at the end of the sampling interval. If the value of this object is deltaValue(2), the value of the selected variable at the last sample will be subtracted from the current value, and the difference compared with the thresholds. This object may not be modified if the associated alarmStatus object is equal to valid(1).
OBJECT-TYPE    
  INTEGER absoluteValue(1)  

cmAlarmValue 1.3.6.1.4.1.1996.20.13.1.1.5
The value of the statistic during the last sampling period. This is the value that is compared with the rising thresholds. The value during the current sampling period is not made available until the period is completed and will remain available until the next period completes.
OBJECT-TYPE    
  INTEGER  

cmAlarmStartupAlarm 1.3.6.1.4.1.1996.20.13.1.1.6
The alarm that may be sent when this entry is first set to valid. If the first sample after this entry becomes valid is greater than or equal to the risingThreshold and alarmStartupAlarm is equal to risingAlarm(1) or risingOrFallingAlarm(3), then a single rising alarm will be generated. If the first sample after this entry becomes valid is less than or equal to the fallingThreshold and alarmStartupAlarm is equal to fallingAlarm(2) or risingOrFallingAlarm(3), then a single falling alarm will be generated. This object may not be modified if the associated alarmStatus object is equal to valid(1).
OBJECT-TYPE    
  INTEGER risingAlarm(1), fallingAlarm(2)  

cmAlarmRisingThreshold 1.3.6.1.4.1.1996.20.13.1.1.7
A threshold for the sampled statistic. When the current sampled value is greater than or equal to this threshold, and the value at the last sampling interval was less than this threshold, a single event will be generated. A single event will also be generated if the first sample after this entry becomes valid is greater than or equal to this threshold and the associated alarmStartupAlarm is equal to risingAlarm(1). Note: a value of 0 turns off the monitoring of this threshold
OBJECT-TYPE    
  INTEGER 0..2147483647  

cmAlarmFallingThreshold 1.3.6.1.4.1.1996.20.13.1.1.8
A threshold for the sampled statistic. When the current sampled value is less than or equal to this threshold, and the value at the last sampling interval was greater than this threshold, a single event will be generated. A single event will also be generated if the first sample after this entry becomes valid is less than or equal to this threshold and the associated alarmStartupAlarm is equal to fallingAlarm(2) or risingOrFallingAlarm(3). After a falling event is generated, another such event will not be generated until the sampled value rises above this threshold and reaches the cmAlarmRisingThreshold. Default: 0
OBJECT-TYPE    
  INTEGER -255..255  

cmAlarmStatus 1.3.6.1.4.1.1996.20.13.1.1.12
The status of this alarm entry.
OBJECT-TYPE    
  EntryStatus  

cmAlarmSwitch 1.3.6.1.4.1.1996.20.13.2
The value of this object indicates whether the monitoring of threshold crossing alerts is enabled or disabled.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

cmAlarmSamplingInterval 1.3.6.1.4.1.1996.20.13.3
The value of this object specfies the sampling interval, in minutes, for performance metrics collection in the cmDslIntervalTable, dsx3IntervalTable, and dsx3FarEndIntervalTable in the system. The minimum value for this object is 5 minutes. The recommended values are 5, 15, and 60 minutes. The value of this object will affect the amount of data collected in the cmDsl24HrTable, the dsx3TotalTable, and the dsx3FarEndTotalTable. If the SamplingInterval is less than 15 minutes, then each of these tables will contain 96*SamplingInterval minutes worth of summed data. If the SamplingInterval is greater than 15 minutes, these tables will contain some multiple of SamplingInterval such that the total is closest to, but not less than, 24 hours. (For example, with a SamplingInterval of 17 minutes, these tables will contain 85 intervals = 1445 minutes = 24 hrs and 5 minutes worth of data.) Default: 15 minutes.
OBJECT-TYPE    
  INTEGER  

cmEvent 1.3.6.1.4.1.1996.20.14
OBJECT IDENTIFIER    

cmUserGroup 1.3.6.1.4.1.1996.20.15
OBJECT IDENTIFIER    

cmNameTable 1.3.6.1.4.1.1996.20.15.1
This is a multi-indexed table that stores the protocol interface name and corresponding PII for all protocol interfaces in the system. Typically a network operator will query this table to obtain the interface name that corresponds to a particular PII.
OBJECT-TYPE    
  SEQUENCE OF  
    CmNameEntry

cmNameEntry 1.3.6.1.4.1.1996.20.15.1.1
An entry in the cmName table.
OBJECT-TYPE    
  CmNameEntry  

cmNameIfName 1.3.6.1.4.1.1996.20.15.1.1.1
The value of this object identifies the name of the virtual circuit. The cmNameIfName is set in the cmSubIfaceTable.
OBJECT-TYPE    
  DisplayString  

cmNamePII 1.3.6.1.4.1.1996.20.15.1.1.2
The value of this object identifies the network interface from the shelf, slot, port and user channel. PII stands for Permanent Interface Identifier.
OBJECT-TYPE    
  CmObjectPII  

cmGroupTable 1.3.6.1.4.1.1996.20.15.2
Grouping allows carrier to associate their end user customers with a particular group. The 'grouping feature' is implemented in the cmGroupTable and the cmMemberTable. The cmGroupTable allows an operator to create new groups, delete existing groups and rename existing groups.
OBJECT-TYPE    
  SEQUENCE OF  
    CmGroupEntry

cmGroupEntry 1.3.6.1.4.1.1996.20.15.2.1
An entry in the cmGroup table.
OBJECT-TYPE    
  CmGroupEntry  

cmGroupName 1.3.6.1.4.1.1996.20.15.2.1.1
The value of this object displays the customer assigned name of a group. Note that the name of a group can be changed using cmGroupNewGrpName
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

cmGroupNewGrpName 1.3.6.1.4.1.1996.20.15.2.1.2
The object is used to rename a user group. The value of this object is the new user group name. Setting this object will change the name of the user group in this table as well as all entries with this user group name in the cmMemberTable.
OBJECT-TYPE    
  DisplayString  

cmGroupRowStatus 1.3.6.1.4.1.1996.20.15.2.1.3
This object is the rowStatus of the group. A group is enabled by setting this object to 'active'. An entry in this table is created by setting this object to 'createAndGo' and is destroyed by setting this object to 'destroy'. The value 'notReady','createAndGo', and 'notInService' are not supported
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

cmMemberTable 1.3.6.1.4.1.1996.20.15.3
Grouping allows a carrier to associate their end user customers with a particular group. The 'grouping feature' is implemented in the cmGroupTable and the cmMemberTable. The cmMemberTable allows an operator to add a new interface to and delete an existing interfaces from a group.
OBJECT-TYPE    
  SEQUENCE OF  
    CmMemberEntry

cmMemberEntry 1.3.6.1.4.1.1996.20.15.3.1
An entry in the cmMemberTable.
OBJECT-TYPE    
  CmMemberEntry  

cmMemberGrpName 1.3.6.1.4.1.1996.20.15.3.1.1
The value of this object identifies the name of the user group to which this member belongs. Note that this user group must exist in the cmGroupTable before an operator can use it in this table.
OBJECT-TYPE    
  DisplayString  

cmMemberPII 1.3.6.1.4.1.1996.20.15.3.1.2
The value of this object identifies the network interface from the shelf, slot, port and user channel. PII stands for Permanent Interface Identifier .
OBJECT-TYPE    
  CmObjectPII  

cmMemberRowStatus 1.3.6.1.4.1.1996.20.15.3.1.3
This object is the rowStatus of the member. A member is enabled by setting this object to 'active'. An entry in this table is created by setting this object to 'createAndGo' and is destroyed by setting this object to 'destroy'. The value 'notReady', 'notInService' and 'createAndGo'are not supported. Note: when an entry is added to the cmMemberTable the group name in the corresponding cmIfaceTable entry will be updated.
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

cmMaint 1.3.6.1.4.1.1996.20.16
OBJECT IDENTIFIER    

cmMaintCmdTable 1.3.6.1.4.1.1996.20.16.1
This table allows the operator to configure the Automatic and Manual collection of Bulk Statistics and the recurring Config Backup. There will be one entry in this group for each type of Maintanence command supported.
OBJECT-TYPE    
  SEQUENCE OF  
    CmMaintCmdEntry

cmMaintCmdEntry 1.3.6.1.4.1.1996.20.16.1.1
A list of parameters that are associated with a given maintenance command in the system.
OBJECT-TYPE    
  CmMaintCmdEntry  

cmMaintCmdCommand 1.3.6.1.4.1.1996.20.16.1.1.1
This is the command being configured. This is also the index into the table.
OBJECT-TYPE    
  INTEGER statsAuto(1), statsManual(2), configBackup(3), configRestore(4), bulkCPEDownload(5)  

cmMaintCmdRowStatus 1.3.6.1.4.1.1996.20.16.1.1.2
This object is used to add and delete entries from this table. All values are writable, but only 'active' and 'notInService' are readable. An operator uses 'createAndGo' or 'createAndWait' to create an instance of the table for a particular command. If 'createAndGo' is entered, then the entry will be considered 'active' and the command will begin executing. If the operator enters 'createAndWait', the entry will be considered 'notInService' and the command will not be executed. The operator enters 'destroy' to delete the instance. If an entry is 'notInService', the operator can set the RowStatus to 'active' to allow the command to commence. If an automatic entry is 'active', the operator can enter 'notInService' to pause the command. The operator may abort a bulkCPEDownload command by setting this object to 'NotInService'. Default: 'active'
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

cmMaintCmdStartTime 1.3.6.1.4.1.1996.20.16.1.1.3
This is the start time that applies to the command. If the command is 'statsAuto' or 'statsManual' the StartTime reflects the timestamp of the first data contained in the uploaded file (rounded up to the nearest interval boundary). For 'statsAuto' this means the first upload will occur at StartTime + Recurrance. For 'configBackup', 'configRestore' and 'bulkCPEDownload', the StartTime is the time the command will first be executed. If the StartTime is in the past and the recurrence is 0, the command will be executed immediately. Note: Time values should be in the format: YY/MM/DD-HH:MM:SS. If the operator enters seconds in this field, they will be ignored. Default: None, the operator must configure this field explicitly.
OBJECT-TYPE    
  DisplayString  

cmMaintCmdRecurrence 1.3.6.1.4.1.1996.20.16.1.1.4
For automatic commands (such as 'configBackup' and 'statsAuto'), this is the number of hours between each execution of the command. For the 'configBackup' command, a value of 0 indicates to do the backup once. The command will be executed at the given StartTime. If Recurrence is zero and StartTime is zero (or in the past), the backup will be executed immediately. For 'statsAuto', the number of hours is limited to 6. This ensures that the system provides consistent data with no gaps in the uploaded files regardless of recent changes to the sampling interval. Also, the ReportingPeriod will be made to match the Recurrence value. For 'configRestore', the value of this object is ignored. For 'bulkCPEDownload', the recurrence must be 0. Default: 0
OBJECT-TYPE    
  INTEGER  

cmMaintCmdReportingPeriod 1.3.6.1.4.1.1996.20.16.1.1.5
The ReportingPeriod defines the valid range (number of hours) of data in the uploaded file. For the 'configBackup' and bulkCPEDownload' commands, sets to this value are rejected and the value when read is 0. For 'statsAuto', operator sets to this object are rejected, and the value when read is set to the value of the Recurrence object. For 'statsManual', the operator sets this value to the number of hours of data that they would like to include in the uploaded file. The timestamps on the data uploaded will range from StartTime to StartTime + ReportingPeriod. If the StartTime + ReportingPeriod is greater than the current time, the system will upload as much data as it has collected at present. For 'configRestore', the value of this object is ignored. Default: 0
OBJECT-TYPE    
  INTEGER  

cmMaintCmdPrimaryIpAddr 1.3.6.1.4.1.1996.20.16.1.1.6
This is the IpAddress of the primary file server to use in executing the command. If an address of all 0's is entered, no save will be attempted to the primary and no event will be generated. For 'bulkCPEDownload', the value of this object is ignored. Default: None, this field must be configured by the operator.
OBJECT-TYPE    
  IpAddress  

cmMaintCmdSecondaryIpAddr 1.3.6.1.4.1.1996.20.16.1.1.7
This is the IpAddress of the secondary file server to use in executing the command. If an address of all 0's is entered, no save will be attempted to the secondary and no event will be generated. If a transfer to the primary fails and there is no secondary address configured, the CommandStatus will be 'failed'. For 'bulkCPEDownload', the value of this object is ignored. For 'configRestore', the value of this object is ignored. Default: 0.0.0.0
OBJECT-TYPE    
  IpAddress  

cmMaintCmdDirectory 1.3.6.1.4.1.1996.20.16.1.1.8
This is the directory on the file server where uploaded files will be stored on both the primary and secondary file servers. For 'bulkCPEDownload', the value of this object is ignored. Default: '' (empty string)
OBJECT-TYPE    
  DisplayString  

cmMaintCmdBaseFileName 1.3.6.1.4.1.1996.20.16.1.1.9
This is the base file name that the system will use when generating the statistics file for both the 'statsAuto' and 'statsManual' commands. In either case, the system will append the interval start time to the filename before transferring the file. For 'configRestore', this is the name of the saved configuration file that the system will retrieve from the file server. For 'bulkCPEDownload', the value of this object is ignored. Default: '' (empty string)
OBJECT-TYPE    
  DisplayString  

cmMaintCmdUserName 1.3.6.1.4.1.1996.20.16.1.1.10
This is the name that the system will use when initiating an FTP session with the file server (this applies to both the primary and secondary file servers). For 'bulkCPEDownload', the value of this object is ignored. Default: 'Anonymous'
OBJECT-TYPE    
  DisplayString  

cmMaintCmdPassword 1.3.6.1.4.1.1996.20.16.1.1.11
This is the password that the system will use when initiating an FTP session with the file server (this applies to both the primary and secondary file servers). The operator can write this value, but when it is read back it displays '****'. Note: This will need to be stored as a plain text ascii string so it can be used by the system. The value must start with an alphanumeric value. For 'bulkCPEDownload', the value of this object is ignored. Default: '' (empty string)
OBJECT-TYPE    
  DisplayString  

cmMaintCmdPreviousTime 1.3.6.1.4.1.1996.20.16.1.1.12
This is the calendar time at the beginning of the last attempted execution. If this operation has not been attempted since powerup, this field displays an empty string (''). If the command is 'configBackup', this field is only updated when the upload is actually attempted (i.e. if the stored configuration has changed since the last attempt).
OBJECT-TYPE    
  DisplayString  

cmMaintCmdNextTime 1.3.6.1.4.1.1996.20.16.1.1.13
This is the calendar time when this automatic operation will next be attempted. If this is not an automatic operation, or this operation is not 'active', this field displays an empty string ('').
OBJECT-TYPE    
  DisplayString  

cmMaintCmdCommandStatus 1.3.6.1.4.1.1996.20.16.1.1.14
This object indicates the status of the last command. 'none' indicates no command has been executed since startup. 'savedToPrimary' indicates the last upload succeeded to the primary file server. 'savedToSecondary' indicates that the last upload succeeded to the secondary file server. 'succeeded' indicates that the last restore command succeeded. 'failed' indicates that the last file transfer failed between the system and the file servers. InProgress indicates the command is currently running. Aborted applies to the 'bulkCPEDownload' command only. For 'bulkCPEDownload', the valid CommandStatus are: None, Failed, InProgress, Succeeded, and Aborted. Failed indicates the software download failed for one or more candidate CPE. Aborted indicates the command was aborted before all candidate CPE were downloaded.
OBJECT-TYPE    
  INTEGER none(1), savedToPrimary(2), savedToSecondary(3), failed(4), inProgress(5), succeeded(6), aborted(7)  

cmMaintCmdStatusText 1.3.6.1.4.1.1996.20.16.1.1.15
The object contains a more detailed status that can be filled in by the system to provide more information to the operator. This status may be updated while a command is 'inProgress'. For 'bulkCPEDownload', this object indicates the number of successful download, failed download, download in progress, and download still pending.
OBJECT-TYPE    
  DisplayString SIZE(0..128)  

cmMaintStatsDelimiter 1.3.6.1.4.1.1996.20.16.2
This is the delimiter that is added between each column in the uploaded data file. This is any standard ASCII character. Default: '|'
OBJECT-TYPE    
  DisplayString SIZE(1..1)  

cmProxyArp 1.3.6.1.4.1.1996.20.17
OBJECT IDENTIFIER    

cmProxyArpTable 1.3.6.1.4.1.1996.20.17.1
This table provides information about the Proxy Arp status of each DSL port in the system.
OBJECT-TYPE    
  SEQUENCE OF  
    CmProxyArpEntry

cmProxyArpEntry 1.3.6.1.4.1.1996.20.17.1.1
The Proxy Arp status associated with a given DSL Port.
OBJECT-TYPE    
  CmProxyArpEntry  

cmProxyArpPII 1.3.6.1.4.1.1996.20.17.1.1.1
This is the PII of the DSL port. This is also the index into the table.
OBJECT-TYPE    
  CmObjectPII  

cmProxyArpRowStatus 1.3.6.1.4.1.1996.20.17.1.1.2
This object is used to activate/deactivate the proxy arp function for the given DSL port. Proxy Arp is valid only for a port configured in one of the IP netmodels. An attempt to enable it for some other netmodel will result in a 'DB_INCONSISTENT_VALUE' error. If the netmodel for a DSL port with Proxy Arp active is changed to a netmodel that is incompatible with Proxy ARP, the associated row will be deleted from the table.
OBJECT-TYPE    
  INTEGER active(1), destroy(6)  

cmMultiShelf 1.3.6.1.4.1.1996.20.18
OBJECT IDENTIFIER    

cmTrunkIfTable 1.3.6.1.4.1.1996.20.18.1
This table contains all the inter-shelf trunk interfaces. Each inter-shelf trunk interface is represented by its PII.
OBJECT-TYPE    
  SEQUENCE OF  
    CmTrunkIfEntry

cmTrunkIfEntry 1.3.6.1.4.1.1996.20.18.1.1
Each entry in this table represents an interface or an end-point of the inter- shelf trunk.
OBJECT-TYPE    
  CmTrunkIfEntry  

cmTrunkIfIndex 1.3.6.1.4.1.1996.20.18.1.1.1
This value is used to index the table. The shelf.slot.port portions of the PII are required to traverse the table. The index will address a particular ethernet port on a particular SCM in a particular shelf.
OBJECT-TYPE    
  CmObjectPII  

cmTrunkIfOperState 1.3.6.1.4.1.1996.20.18.1.1.2
Operational state of this ethernet port.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

cmTrunkIfAdminState 1.3.6.1.4.1.1996.20.18.1.1.3
This allows the operator to enable and disable a particular ethernet port. The operational state of the port can be determined by accessing the cmTrunkIfOperState object.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

cmTrunkIfSentPackets 1.3.6.1.4.1.1996.20.18.1.1.4
Number of transmitted packets from a particular ethernet port on a SCM.
OBJECT-TYPE    
  Counter  

cmTrunkIfSentError 1.3.6.1.4.1.1996.20.18.1.1.5
Number of errors detected when sending packets from a particular ethernet port on a SCM.
OBJECT-TYPE    
  Counter  

cmTrunkIfRecvPackets 1.3.6.1.4.1.1996.20.18.1.1.6
Number of packets received from a particular ethernet port on a SCM.
OBJECT-TYPE    
  Counter  

cmTrunkIfRecvError 1.3.6.1.4.1.1996.20.18.1.1.7
Number of errors detected while receiving packets from a particular ethernet port on a SCM.
OBJECT-TYPE    
  Counter  

cmTrunkConnectionTable 1.3.6.1.4.1.1996.20.18.2
This table contains the inter-shelf trunks. Each trunk connects 2 shelves using their inter-shelf trunk interface. The trunk provides control and data path for the shelves.
OBJECT-TYPE    
  SEQUENCE OF  
    CmTrunkConnectionEntry

cmTrunkConnectionEntry 1.3.6.1.4.1.1996.20.18.2.1
Each entry in this table represents a link used to pass control and data between the master shelf and the expansion shelf.
OBJECT-TYPE    
  CmTrunkConnectionEntry  

cmTrunkConnectionTrunkMaster 1.3.6.1.4.1.1996.20.18.2.1.1
This value is used as an index into the table. The shelf.board portions of the PII value are used to specify a particular SCM who is the master of the primary or secondary side of the system.
OBJECT-TYPE    
  CmObjectPII  

cmTrunkConnectionIndex 1.3.6.1.4.1.1996.20.18.2.1.2
This value is the second index to the table. When used with the master SCM PII index, cmTrunkConnectionTrunkMaster, it will identify one of the inter-shelf trunks for that side of the system. This index itself is arbitrary but will give the operator the state and PII values of each end of the connection. Numbering for each side of the system will begin at 1 and there will be no gaps.
OBJECT-TYPE    
  INTEGER 1..4  

cmTrunkConnectionOperState 1.3.6.1.4.1.1996.20.18.2.1.3
Operational state of this IST.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

cmTrunkConnectionLowPII 1.3.6.1.4.1.1996.20.18.2.1.4
Lower PII of the two ports connected by this trunk. The term lower in this context refers to the shelf value of the PII.
OBJECT-TYPE    
  CmObjectPII  

cmTrunkConnectionHighPII 1.3.6.1.4.1.1996.20.18.2.1.5
Higher PII of the two ports connected by this trunk. The term higher in this context refers to the shelf value of the PII.
OBJECT-TYPE    
  CmObjectPII  

cmTrunkTopoTable 1.3.6.1.4.1.1996.20.18.3
This table contains the inter-shelf trunk topology. Each entry is represented by a source shelf and a destination shelf.
OBJECT-TYPE    
  SEQUENCE OF  
    CmTrunkTopoEntry

cmTrunkTopoEntry 1.3.6.1.4.1.1996.20.18.3.1
Each entry in this table represents the connection topology for a possible path from one shelf to another. An entry will be indexed by a source and destination shelf and will contain information about the path between those shelves. If an path exists the entry will contain information about the next hop on that path including the ethernet port on the source shelf to follow, the shelf number of the next hop and the number of hops to complete the path.
OBJECT-TYPE    
  CmTrunkTopoEntry  

cmTrunkTopoSrc 1.3.6.1.4.1.1996.20.18.3.1.1
This value is used as the first index into the table. The shelf.board portions of the PII value are used to specify a particular SCM that will be the source of the connection.
OBJECT-TYPE    
  CmObjectPII  

cmTrunkTopoDest 1.3.6.1.4.1.1996.20.18.3.1.2
This value is used as the second index into the table. The shelf.board portions of the PII value are used to specify a particular SCM that will be the destination of the connection.
OBJECT-TYPE    
  CmObjectPII  

cmTrunkTopoInterface 1.3.6.1.4.1.1996.20.18.3.1.3
Ethernet port to be used on source shelf for the first hop from the source SCM.
OBJECT-TYPE    
  CmObjectPII  

cmTrunkTopoNextHop 1.3.6.1.4.1.1996.20.18.3.1.4
The next shelf on this path.
OBJECT-TYPE    
  INTEGER 1..4  

cmTrunkTopoHops 1.3.6.1.4.1.1996.20.18.3.1.5
The number of hops required going from the source SCM to the destination SCM.
OBJECT-TYPE    
  INTEGER 1..3  

cmDHCP 1.3.6.1.4.1.1996.20.19
OBJECT IDENTIFIER    

cmDHCPTable 1.3.6.1.4.1.1996.20.19.1
This table provides a way for an operator to configure all of the configuration that will be sent to a CPE when the system receives a DHCP request from that CPE.
OBJECT-TYPE    
  SEQUENCE OF  
    CmDHCPEntry

cmDHCPEntry 1.3.6.1.4.1.1996.20.19.1.1
The DHCP configuration information associated with a given DSL Port.
OBJECT-TYPE    
  CmDHCPEntry  

cmDHCPPII 1.3.6.1.4.1.1996.20.19.1.1.1
This is the PII of the DSL port. This is also the index into the table.
OBJECT-TYPE    
  CmObjectPII  

cmDHCPRowStatus 1.3.6.1.4.1.1996.20.19.1.1.2
This object is used to create and delete entries from this table. An operator can implicitly create a row in this table by setting any object in the table or by setting the RowStatus to 'active'. Operators delete entries from this table by setting the RowStatus to 'destroy'.
OBJECT-TYPE    
  INTEGER active(1), destroy(6)  

cmDHCPIpAddress 1.3.6.1.4.1.1996.20.19.1.1.3
This is the IpAddress that will be sent to the CPE when a DHCP request is received over the DSL link. Default: 0.0.0.0
OBJECT-TYPE    
  IpAddress  

cmDHCPNetMask 1.3.6.1.4.1.1996.20.19.1.1.4
This is the NetMask that will be sent to the CPE when a DHCP request is received over the DSL link. Default: 0.0.0.0
OBJECT-TYPE    
  IpAddress  

cmServiceClass 1.3.6.1.4.1.1996.20.20
OBJECT IDENTIFIER    

cmServiceClassAweight 1.3.6.1.4.1.1996.20.20.1
The relative weight of the A Service Class. The percentage of packets that will come from interfaces assigned to class A is: ( Aweight / (Aweight+Bweight+Cweight+Dweight) ) * 100 The system will limit the weights in that all values must be between 1 and 8 and: Aweight >= Bweight >= Cweight >= Dweight Default: 4
OBJECT-TYPE    
  INTEGER 1..8  

cmServiceClassBweight 1.3.6.1.4.1.1996.20.20.2
The relative weight of the B Service Class. The percentage of packets that will come from interfaces assigned to class B is: ( Bweight / (Aweight+Bweight+Cweight+Dweight) ) * 100 The system will limit the weights in that all values must be between 1 and 8 and: Aweight >= Bweight >= Cweight >= Dweight Default: 3
OBJECT-TYPE    
  INTEGER 1..8  

cmServiceClassCweight 1.3.6.1.4.1.1996.20.20.3
The relative weight of the C Service Class. The percentage of packets that will come from interfaces assigned to class C is: ( Cweight / (Aweight+Bweight+Cweight+Dweight) ) * 100 The system will limit the weights in that all values must be between 1 and 8 and: Aweight >= Bweight >= Cweight >= Dweight Default: 2
OBJECT-TYPE    
  INTEGER 1..8  

cmServiceClassDweight 1.3.6.1.4.1.1996.20.20.4
The relative weight of the D Service Class. The percentage of packets that will come from interfaces assigned to class D is: ( Dweight / (Aweight+Bweight+Cweight+Dweight) ) * 100 The system will limit the weights in that all values must be between 1 and 8 and: Aweight >= Bweight >= Cweight >= Dweight Default: 1
OBJECT-TYPE    
  INTEGER 1..8  

cmEndPoint 1.3.6.1.4.1.1996.20.21
OBJECT IDENTIFIER    

cmEndPointPortTable 1.3.6.1.4.1.1996.20.21.1
This read-only table lists all the DSL ports that belong to the same CPE. Each CPE or CPE stack is identified with an unique EndPointID and not all the CPEs support EndPointID. This table is defined for the operator to determine which DSL ports are connected the same EndPoint. Each entry in this table is identified by BasePII of DSL Port and an entry number. Entry number is assigned arbitrarily internally and provides a way for the operator to walk through all DSL ports that are reporting the same EndPointID as the BasePII.
OBJECT-TYPE    
  SEQUENCE OF  
    CmEndPointPortEntry

cmEndPointPortEntry 1.3.6.1.4.1.1996.20.21.1.1
Each entry in the table contains information for a DSL port that belongs to a specific EndPointID(CPE or CPE stack). This information includes the EndPointID, the PII of the DSL port, PII of the IMUX bundle it belongs to and the number of DSL ports with the same EndPointID.
OBJECT-TYPE    
  CmEndPointPortEntry  

cmEndPointPortBasePII 1.3.6.1.4.1.1996.20.21.1.1.1
This is the PII of a physical DSL port, to which the operator wants to find the paired ports.
OBJECT-TYPE    
  CmObjectPII  

cmEndPointPortNumber 1.3.6.1.4.1.1996.20.21.1.1.2
Indicates the Nth DSL port reporting the same EndPointID as the BasePII.
OBJECT-TYPE    
  INTEGER  

cmEndPointPortEndPointID 1.3.6.1.4.1.1996.20.21.1.1.3
This is the EndPointID that is being reported by both the CPE connected to the BasePII and the CPE connected to the PartnerPII in this instance of the table
OBJECT-TYPE    
  OCTET STRING  

cmEndPointPortPartnerPortPII 1.3.6.1.4.1.1996.20.21.1.1.4
This is the PII of the port connected to the CPE reporting the same EndPointID as the BasePII.
OBJECT-TYPE    
  CmObjectPII  

cmEndPointPortPartnerBundlePII 1.3.6.1.4.1.1996.20.21.1.1.5
The PII of the IMUX bundle the PartnerPortPII belongs to. Otherwise, this field is all zeros
OBJECT-TYPE    
  CmObjectPII  

cmEndPointPortNumMatchingEndPoint 1.3.6.1.4.1.1996.20.21.1.1.6
Number of currently trained DSL ports whose CPE are reporting the same EndPointID as the BasePII (including BasePII)
OBJECT-TYPE    
  INTEGER  

cmEndPointConfigTable 1.3.6.1.4.1.1996.20.21.2
This table contains configuration data stored in the system that is used to control and monitor a given CPE endpoint. This group is currently used to configure the CPE bulk download feature only. This table is indexed by the DSL Port PII.
OBJECT-TYPE    
  SEQUENCE OF  
    CmEndPointConfigEntry

cmEndPointConfigEntry 1.3.6.1.4.1.1996.20.21.2.1
Each entry in the table contains user configurable information for a DSL port. Currently, each entry has information as to whether the the bulk download is enabled or disabled by the user and the status of the download itself.
OBJECT-TYPE    
  CmEndPointConfigEntry  

cmEndPointConfigPII 1.3.6.1.4.1.1996.20.21.2.1.1
This is the PII of the DSL port to which the configuration is applicable to.
OBJECT-TYPE    
  CmObjectPII  

cmEndPointConfigRowStatus 1.3.6.1.4.1.1996.20.21.2.1.2
This object is used to create and delete entries from this table. An operator can implicitly create a row in this table by setting the BulkDownload object with no RowStatus, or a RowStatus of active. Operators delete entries from this table by setting the RowStatus to Destroy.
OBJECT-TYPE    
  INTEGER active(1), destroy(6)  

cmEndPointConfigBulkDownload 1.3.6.1.4.1.1996.20.21.2.1.3
This object indicates whether the operator wants this CPE to be downloaded to the software version in the CE's code directory when a bulkCPEDownload command is issued by the operator. When the bulkCPEDownload command is issued, if this object is set to Enabled, and the CPE is online, the system will compare the CPE SW version with the SCM SW version. If the CPE SW version is different, the system will initiate the download process with the CPE. If the CPE is not online, then the system will check at the next time the CPE becomes online.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

cmEndPointConfigDownloadStatus 1.3.6.1.4.1.1996.20.21.2.1.4
This object shows the status of a bulkCPEDownload command relative to this specific CPE. None indicates that no bulkCPEDownload command has been executed since power up. Pending indicates a bulkCPEDownload command has been issued, this CPE is eligible but the download has not started. InProgress indicates the download process has started on this CPE. Failed indicates that an download was attempted to this CPE, but it has failed. Completed indicates an download was attempted and succeeded to this CPE. NotDownloadable indicates that the CPE does not support software download.
OBJECT-TYPE    
  INTEGER none(1), pending(2), inProgress(3), failed(4), completed(5), notDownloadable(6)  

cmEndPointConfigDownloadStartTime 1.3.6.1.4.1.1996.20.21.2.1.5
This is the time the download command is sent to the CPE.
OBJECT-TYPE    
  DisplayString  

cmEndPointConfigDownloadEndTime 1.3.6.1.4.1.1996.20.21.2.1.6
This is the time when a successful or failed download was detected.
OBJECT-TYPE    
  DisplayString  

cmOperator 1.3.6.1.4.1.1996.20.22
OBJECT IDENTIFIER    

cmActiveSessionTable 1.3.6.1.4.1.1996.20.22.1
This is a table group with one record per active operator session. This table is indexed with database session ID.
OBJECT-TYPE    
  SEQUENCE OF  
    CmActiveSessionEntry

cmActiveSessionEntry 1.3.6.1.4.1.1996.20.22.1.1
Each entry in the table contains information for an operator login session. This table is indexed with database session ID.
OBJECT-TYPE    
  CmActiveSessionEntry  

cmActiveSessionSessionID 1.3.6.1.4.1.1996.20.22.1.1.1
The database session ID for this operator session.
OBJECT-TYPE    
  Counter  

cmActiveSessionOperatorName 1.3.6.1.4.1.1996.20.22.1.1.2
The operator name.
OBJECT-TYPE    
  DisplayString  

cmActiveSessionContext 1.3.6.1.4.1.1996.20.22.1.1.3
The context through which the operator is logged in.
OBJECT-TYPE    
  INTEGER http(1), snmp(2), telnet(4), serial(8), ftp(32), shell(64)  

cmActiveSessionPrivilege 1.3.6.1.4.1.1996.20.22.1.1.4
The context through which the operator is logged in.
OBJECT-TYPE    
  INTEGER view(1), monitor(2), provision(3), security(4)  

cmActiveSessionIpAddress 1.3.6.1.4.1.1996.20.22.1.1.5
The IP Address through which the operator is logged in, if the operator is logged in through Telnet or SNMP. If an operator is logged in through the Craft interface, this field will be all zeros.
OBJECT-TYPE    
  IpAddress  

cmActiveSessionStartTime 1.3.6.1.4.1.1996.20.22.1.1.6
The system time when the session was started.
OBJECT-TYPE    
  TimeTicks  

cmActiveSessionIdleTimeout 1.3.6.1.4.1.1996.20.22.1.1.7
The idle timeout in seconds when the active session will auto-logout.
OBJECT-TYPE    
  INTEGER  

cmRadius 1.3.6.1.4.1.1996.20.23
OBJECT IDENTIFIER    

cmRadiusAuthentication 1.3.6.1.4.1.1996.20.23.1
The value of this object indicates if the RADIUS option is enabled or disabled.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

cmRadiusAuthKey 1.3.6.1.4.1.1996.20.23.2
The value of this object is the RADIUS Protocol Authenticator, a shared secret between the server and client.
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

cmRadiusAuthPrimaryIpAddr 1.3.6.1.4.1.1996.20.23.3
The value of this object is the Primary IP address of the RADIUS-Authenticating server.
OBJECT-TYPE    
  IpAddress  

cmRadiusAuthPrimaryPort 1.3.6.1.4.1.1996.20.23.4
The value of this object is the RADIUS-Authenticating Primary Server's port number that the system binds to. Default: 1645
OBJECT-TYPE    
  INTEGER 0..65535  

cmRadiusAuthSecondaryIpAddr 1.3.6.1.4.1.1996.20.23.5
The value of this object is the Secondary IP address of the RADIUS-Authenticating server.
OBJECT-TYPE    
  IpAddress  

cmRadiusAuthSecondaryPort 1.3.6.1.4.1.1996.20.23.6
The value of this object is the RADIUS-Authenticating Secondary Server's port number that the system binds to. Default: 1645
OBJECT-TYPE    
  INTEGER 0..65535  

cmRadiusAuthTertiaryIpAddr 1.3.6.1.4.1.1996.20.23.7
The value of this object is the Tertiary IP address of the RADIUS-Authenticating server.
OBJECT-TYPE    
  IpAddress  

cmRadiusAuthTertiaryPort 1.3.6.1.4.1.1996.20.23.8
The value of this object is the RADIUS-Authenticating Tertiary Server's port number that the system binds to. Default: 1645
OBJECT-TYPE    
  INTEGER 0..65535  

cmRadiusAcctPrimaryIpAddr 1.3.6.1.4.1.1996.20.23.9
The value of this object is the Primary IP address of the RADIUS-Accounting server.
OBJECT-TYPE    
  IpAddress  

cmRadiusAcctPrimaryPort 1.3.6.1.4.1.1996.20.23.10
The value of this object is the RADIUS-Accounting Primary Server's port number that the system binds to. Default: 1646
OBJECT-TYPE    
  INTEGER 0..65535  

cmRadiusAcctSecondaryIpAddr 1.3.6.1.4.1.1996.20.23.11
The value of this object is the Secondary IP address of the RADIUS-Accounting server.
OBJECT-TYPE    
  IpAddress  

cmRadiusAcctSecondaryPort 1.3.6.1.4.1.1996.20.23.12
The value of this object is the RADIUS-Accounting Secondary Server's port number that the system binds to. Default: 1646
OBJECT-TYPE    
  INTEGER 0..65535  

cmRadiusAcctTertiaryIpAddr 1.3.6.1.4.1.1996.20.23.13
The value of this object is the Tertiary IP address of the RADIUS-Accounting server.
OBJECT-TYPE    
  IpAddress  

cmRadiusAcctTertiaryPort 1.3.6.1.4.1.1996.20.23.14
The value of this object is the RADIUS-Accounting Tertiary Server's port number that the system binds to. Default: 1646
OBJECT-TYPE    
  INTEGER 0..65535  

cmSNMP 1.3.6.1.4.1.1996.20.24
OBJECT IDENTIFIER    

cmSNMPResponseString 1.3.6.1.4.1.1996.20.24.1
Copper Mountain proprietary object used for internal processing.
OBJECT-TYPE    
  DisplayString  

cmFanFailureClear 1.3.6.1.4.1.1996.21
Indicates that the system fan failure has been cleared. If this trap has a severity of 'information,' it can potentially clear an alarm in the system. When such a trap is received by the manager, the operator can query the cmTrapCriticalCount, cmTrapMajorAlarmCount, and cmTrapMinorAlarmCount objects to get the current system alarm status.
TRAP-TYPE    
  cmTrapEventLogProbableCause  
  cmTrapEventLogText  
  cmTrapEventLogSeverity  
  cmTrapEventLogType  
  cmTrapEventLogObjectClass  
  cmTrapEventLogClassId  
  cmTrapEventLogSeqNum  
  cmTrapEventLogTimeTag  

cmPowerSupplyFailure 1.3.6.1.4.1.1996.22
Indicates that one of the two system power supplies has failed. The failed power supply is identified by cmTrapEventLogObjectClass and cmTrapEventLogClassId.
TRAP-TYPE    
  cmTrapEventLogProbableCause  
  cmTrapEventLogText  
  cmTrapEventLogSeverity  
  cmTrapEventLogType  
  cmTrapEventLogObjectClass  
  cmTrapEventLogClassId  
  cmTrapEventLogSeqNum  
  cmTrapEventLogTimeTag  

cmPowerSupplyFailureClear 1.3.6.1.4.1.1996.23
Indicates that a previous power supply failure has been cleared. The power supply is identified by cmTrapEventLogObjectClass and cmTrapEventLogClassId. If this trap has a severity of 'information,' it can potentially clear an alarm in the system. When such a trap is received by the manager, the operator can query the cmTrapCriticalCount, cmTrapMajorAlarmCount, and cmTrapMinorAlarmCount objects to get the current system alarm status.
TRAP-TYPE    
  cmTrapEventLogProbableCause  
  cmTrapEventLogText  
  cmTrapEventLogSeverity  
  cmTrapEventLogType  
  cmTrapEventLogObjectClass  
  cmTrapEventLogClassId  
  cmTrapEventLogSeqNum  
  cmTrapEventLogTimeTag  

cmLoopStatusChange 1.3.6.1.4.1.1996.24
This trap is sent at the beginning and end of a loopback test. the cmLoopTermCode, cmLoopTimeElapsed, cmLoopTxCount, and cmLoopRxErrors fields are only valid if cmLoopStatus is Done.
TRAP-TYPE    
  cmLoopStatus  
  cmLoopID  
  cmLoopInterface  
  cmLoopType  
  cmLoopOwnerString  
  cmLoopTermCode  
  cmLoopTimeElapsed  
  cmLoopTxCount  
  cmLoopRxErrors  
  cmNameIfName  
  cmNamePII  
  cmGroupName  
  cmTrapEventLogSeverity  
  cmTrapEventLogType  
  cmTrapEventLogObjectClass  
  cmTrapEventLogClassId  
  cmTrapEventLogSeqNum  
  cmTrapEventLogTimeTag  

cmRisingAlarm 1.3.6.1.4.1.1996.25
The SNMP trap that is generated when an alarm entry crosses its rising threshold and generates an event that is configured for sending SNMP traps.
TRAP-TYPE    
  cmAlarmIndex  
  cmAlarmVariable  
  cmAlarmSampleType  
  cmAlarmValue  
  cmAlarmRisingThreshold  
  cmNameIfName  
  cmNamePII  
  cmGroupName  
  cmTrapEventLogSeverity  
  cmTrapEventLogType  
  cmTrapEventLogObjectClass  
  cmTrapEventLogClassId  
  cmTrapEventLogSeqNum  
  cmTrapEventLogTimeTag  

cmIDSLBoardTimingLoss 1.3.6.1.4.1.1996.26
This trap indicates that the globally timed master or slave IDSL Line Card has lost network timing.
TRAP-TYPE    
  cmIDSLBoardIndex  
  cmIDSLBoardTimingMode  
  cmTrapEventLogSeverity  
  cmTrapEventLogType  
  cmTrapEventLogObjectClass  
  cmTrapEventLogClassId  
  cmTrapEventLogSeqNum  
  cmTrapEventLogTimeTag  

cmIDSLBoardTimingLossClear 1.3.6.1.4.1.1996.27
This trap indicates that the globally timed master or slave IDSL Line Card has reaquired network timing. If this trap has a severity of 'information,' it can potentially clear an alarm in the system. When such a trap is received by the manager, the operator can query the cmTrapCriticalCount, cmTrapMajorAlarmCount, and cmTrapMinorAlarmCount objects to get the current system alarm status.
TRAP-TYPE    
  cmIDSLBoardIndex  
  cmIDSLBoardTimingMode  
  cmTrapEventLogSeverity  
  cmTrapEventLogType  
  cmTrapEventLogObjectClass  
  cmTrapEventLogClassId  
  cmTrapEventLogSeqNum  
  cmTrapEventLogTimeTag  

cmRoleChange 1.3.6.1.4.1.1996.28
This trap is sent whenever an SCM changes role from Primary to Secondary, or from Secondary to Primary. If this trap has a severity of 'information,' it can potentially clear an alarm in the system. When such a trap is received by the manager, the operator can query the cmTrapCriticalCount, cmTrapMajorAlarmCount, and cmTrapMinorAlarmCount objects to get the current system alarm status.
TRAP-TYPE    
  cmBoardIndex  
  cmSysPrimaryPII  
  cmTrapEventLogSeverity  
  cmTrapEventLogType  
  cmTrapEventLogObjectClass  
  cmTrapEventLogClassId  
  cmTrapEventLogSeqNum  
  cmTrapEventLogTimeTag  

cmRedundancyChange 1.3.6.1.4.1.1996.29
This trap is sent whenever an SCM detects that Redundancy has changed from enabled/disabled to disabled/enabled.
TRAP-TYPE    
  cmBoardIndex  
  cmSysRedundancy  
  cmTrapEventLogSeverity  
  cmTrapEventLogType  
  cmTrapEventLogObjectClass  
  cmTrapEventLogClassId  
  cmTrapEventLogSeqNum  
  cmTrapEventLogTimeTag  

cmRedundancyConflict 1.3.6.1.4.1.1996.30
This trap is sent when an SCM comes up, detects that it should be locked as the Primary SCM, but there is another Primary which has already locked the system (i.e. Disabled Redundancy).
TRAP-TYPE    
  cmBoardIndex  
  cmTrapEventLogSeverity  
  cmTrapEventLogType  
  cmTrapEventLogObjectClass  
  cmTrapEventLogClassId  
  cmTrapEventLogSeqNum  
  cmTrapEventLogTimeTag  

cmMaintCmdStatusChange 1.3.6.1.4.1.1996.31
Indicates a maintenance command completed successfully or failed, according to the CommandStatus field.
TRAP-TYPE    
  cmMaintCmdCommand  
  cmMaintCmdCommandStatus  
  cmTrapEventLogProbableCause  
  cmTrapEventLogText  
  cmTrapEventLogSeverity  
  cmTrapEventLogType  
  cmTrapEventLogObjectClass  
  cmTrapEventLogClassId  
  cmTrapEventLogSeqNum  
  cmTrapEventLogTimeTag  

cmFallingAlarm 1.3.6.1.4.1.1996.32
This trap is sent at the end of an interval when an object that is configured with a Falling Threshold has dropped below the fallingThresdhold value in the cmAlarmTable.
TRAP-TYPE    
  cmAlarmIndex  
  cmAlarmVariable  
  cmAlarmSampleType  
  cmAlarmValue  
  cmAlarmFallingThreshold  
  cmNameIfName  
  cmNamePII  
  cmGroupName  
  cmTrapEventLogSeverity  
  cmTrapEventLogType  
  cmTrapEventLogObjectClass  
  cmTrapEventLogClassId  
  cmTrapEventLogSeqNum  
  cmTrapEventLogTimeTag  

cmRateFallback 1.3.6.1.4.1.1996.33
This trap is sent whenever a modem trains at a rate less than the configured datarate.
TRAP-TYPE    
  cmHDSLModemIndex  
  cmHDSLModemCurrentRate  
  cmTrapEventLogSeverity  
  cmTrapEventLogType  
  cmTrapEventLogObjectClass  
  cmTrapEventLogClassId  
  cmTrapEventLogSeqNum  
  cmTrapEventLogTimeTag  

cmRateFallbackClear 1.3.6.1.4.1.1996.34
This trap is sent whenever the modem drops training.
TRAP-TYPE    
  cmHDSLModemIndex  
  cmHDSLModemCurrentRate  
  cmTrapEventLogSeverity  
  cmTrapEventLogType  
  cmTrapEventLogObjectClass  
  cmTrapEventLogClassId  
  cmTrapEventLogSeqNum  
  cmTrapEventLogTimeTag  

cmEndPointConflictAlarm 1.3.6.1.4.1.1996.35
This minor severity trap is sent if one of the following configuration conflicts occurs: 1. A DSL link comes up and the EndPointID matches another DSL link outside the first links bundle. 2. A DSL link comes up and the EndPointID doesn't match the current EndPointID in its bundle. 3. A DSL Link that is not IMUX capable comes up and is configured in a bundle.
TRAP-TYPE    
  cmEndPointPortBasePII  
  cmEndPointPortEndPointID  
  cmEndPointPortPartnerBundlePII  
  cmTrapEventLogText  
  cmTrapEventLogSeverity  
  cmTrapEventLogType  
  cmTrapEventLogObjectClass  
  cmTrapEventLogClassId  
  cmTrapEventLogSeqNum  
  cmTrapEventLogTimeTag  

Defined Objects

DLCI  
INTEGER    

PerfTotalCount  
Gauge    

CmObjectPII  
INTEGER    

CmHDSLModemEntry  
SEQUENCE    
  INTEGER as cmHDSLModemIndex  
  INTEGER as cmHDSLModemType  
  INTEGER as cmHDSLModemTxGain  
  INTEGER as cmHDSLModemTestMode  
  INTEGER as cmHDSLModemNoiseMargin  
  INTEGER as cmHDSLModemBPSwMajorVersion  
  INTEGER as cmHDSLModemBPSwMinorVersion  
  INTEGER as cmHDSLModemBPHwVersion  
  INTEGER as cmHDSLModemDataRate  
  INTEGER as cmHDSLModemCpeCode  
  Counter as cmHDSLModemSuccessfulTrains  
  Counter as cmHDSLModemFailedTrainingAttempts  
  Counter as cmHDSLModemCpeResponses  
  INTEGER as cmHDSLModemMinRate  
  INTEGER as cmHDSLModemCurrentRate  
  INTEGER as cmHDSLModemCommand  

CmHDSLPerfIntervalEntry  
SEQUENCE    
  INTEGER as cmHDSLPerfIndex  
  INTEGER as cmHDSLPerfIntervalNumber  
  Counter as cmHDSLPerfTxUnderruns  
  Counter as cmHDSLPerfRxTruncated  
  Counter as cmHDSLPerfRxBig  
  Counter as cmHDSLPerfRxAborts  
  Counter as cmHDSLPerfRxAlignmentErrors  
  Counter as cmHDSLPerfRxCRCErrors  
  Counter as cmHDSLPerfRxOverruns  
  Counter as cmHDSLPerfRxValidFrames  
  Counter as cmHDSLPerfTxValidFrames  
  Counter as cmHDSLPerfRxNoBuffers  

CmCpeHDSLModemEntry  
SEQUENCE    
  INTEGER as cmCpeHDSLModemIndex  
  INTEGER as cmCpeHDSLModemType  
  INTEGER as cmCpeHDSLModemTxGain  
  INTEGER as cmCpeHDSLModemTestMode  
  INTEGER as cmCpeHDSLModemNoiseMargin  
  INTEGER as cmCpeHDSLModemBPSwMajorVersion  
  INTEGER as cmCpeHDSLModemBPSwMinorVersion  
  INTEGER as cmCpeHDSLModemBPHwVersion  
  INTEGER as cmCpeHDSLModemDataRate  

CmSDSLTestEntry  
SEQUENCE    
  CmObjectPII as cmSDSLTestIndex  
  INTEGER as cmSDSLTestAction  
  INTEGER as cmSDSLTestStatus  
  DisplayString as cmSDSLTestTestCompleteTime  
  INTEGER as cmSDSLTestContinuityTestResult  
  INTEGER as cmSDSLTestNearEndLoopProfile  
  INTEGER as cmSDSLTestDebugResult  
  INTEGER as cmSDSLTestType  
  INTEGER as cmSDSLTestMaxRate  

CmIfaceEntry  
SEQUENCE    
  CmObjectPII as cmIfacePII  
  INTEGER as cmIfaceIfIndex  
  INTEGER as cmIfaceNetModel  
  IpAddress as cmIfaceIpAddr  
  IpAddress as cmIfaceNetMask  
  OCTET STRING as cmIfaceMacAddr  
  OCTET STRING as cmIfaceBurnedInMacAddr  
  IpAddress as cmIfaceFarEndAddr  
  CmObjectPII as cmIfaceDestPII  
  INTEGER as cmIfaceFwdMode  
  DisplayString as cmIfaceName  
  DisplayString as cmIfaceAdditionalInfo  
  INTEGER as cmIfaceCMCPCompatible  
  INTEGER as cmIfaceEncapsulationType  
  DisplayString as cmIfaceGroupName  
  INTEGER as cmIfaceServiceClass  

CmSubIfaceEntry  
SEQUENCE    
  INTEGER as cmSubIfacePII  
  CmObjectPII as cmSubIfaceDestPII  
  DisplayString as cmSubIfaceName SIZE(0..31)  
  INTEGER as cmSubIfaceRowStatus  
  INTEGER as cmSubIfacePriority  

CmFrDlcmiEntry  
SEQUENCE    
  CmObjectPII as cmFrDlcmiIfIndex  
  INTEGER as cmFrDlcmiAdminState  
  INTEGER as cmFrDlcmiOperState  
  INTEGER as cmFrDlcmiFirstDLCI  
  INTEGER as cmFrDlcmiLMIMode  
  INTEGER as cmFrDlcmiDceN392  
  INTEGER as cmFrDlcmiDceN393  
  INTEGER as cmFrDlcmiDceT392  
  Counter as cmFrDlcmiRcvUnknownDLCI  
  Counter as cmFrDlcmiLMITxStatusEnquiries  
  Counter as cmFrDlcmiLMITxStatusResponses  
  Counter as cmFrDlcmiLMIRxStatusEnquiries  
  Counter as cmFrDlcmiLMIRxStatusResponses  
  Counter as cmFrDlcmiLMIRxUpdates  
  Counter as cmFrDlcmiUnknownLMIMessagesRcvd  
  Counter as cmFrDlcmiLostLMISequences  

CmFrCircuitEntry  
SEQUENCE    
  CmObjectPII as cmFrCircuitIfIndex  
  DLCI as cmFrCircuitDlci  
  INTEGER as cmFrCircuitOperState  
  Counter as cmFrCircuitFramesDroppedTxUnavail  
  Counter as cmFrCircuitFramesDroppedRxUnavail  
  Counter as cmFrCircuitFramesDroppedExcess  

CmAtmVclEntry  
SEQUENCE    
  CmObjectPII as cmAtmVclPII  
  INTEGER as cmAtmVclVpi  
  INTEGER as cmAtmVclVci  
  INTEGER as cmAtmVclAdminStatus  
  INTEGER as cmAtmVclOperStatus  
  TimeTicks as cmAtmVclLastChange  
  INTEGER as cmAtmVclAalType  
  INTEGER as cmAtmVclAal5CpcsTransmitSduSize  
  INTEGER as cmAtmVclAal5CpcsReceiveSduSize  
  INTEGER as cmAtmVclRowStatus  

CmDS3AtmEntry  
SEQUENCE    
  CmObjectPII as cmDS3AtmPII  
  INTEGER as cmDS3AtmCbitParityEnable  
  INTEGER as cmDS3AtmCellPayloadScrambling  
  INTEGER as cmDS3AtmCellMapping  

CmNameEntry  
SEQUENCE    
  DisplayString as cmNameIfName  
  CmObjectPII as cmNamePII  

CmGroupEntry  
SEQUENCE    
  DisplayString as cmGroupName  
  DisplayString as cmGroupNewGrpName  
  INTEGER as cmGroupRowStatus  

CmMemberEntry  
SEQUENCE    
  DisplayString as cmMemberGrpName  
  CmObjectPII as cmMemberPII  
  INTEGER as cmMemberRowStatus  

CmCpeEthernetIntervalEntry  
SEQUENCE    
  INTEGER as cmCpeEthernetIndex  
  INTEGER as cmCpeEthernetIntervalNumber  
  Counter as cmCpeEthernetIntUnknowns  
  Counter as cmCpeEthernetRxOK  
  Counter as cmCpeEthernetRxNoBufs  
  Counter as cmCpeEthernetRxMiss  
  Counter as cmCpeEthernetRxSkip  
  Counter as cmCpeEthernetRxRunt  
  Counter as cmCpeEthernetRxExtraData  
  Counter as cmCpeEthernetRxCRCError  
  Counter as cmCpeEthernetRxAlignError  
  Counter as cmCpeEthernetRxDribbleBits  
  Counter as cmCpeEthernetTxTooBig  
  Counter as cmCpeEthernetTxNotReady  
  Counter as cmCpeEthernetTxLossCRS  
  Counter as cmCpeEthernetTxSQEErr  
  Counter as cmCpeEthernetTxOutOfWindow  
  Counter as cmCpeEthernetTxJabber  
  Counter as cmCpeEthernetTx16Collisions  
  Counter as cmCpeEthernetTxCollisions  
  Counter as cmCpeEthernetTxOK  

CmFilterEntry  
SEQUENCE    
  INTEGER as cmFilterIndex  
  INTEGER as cmFilterFilterNumber  
  INTEGER as cmFilterFunction  
  IpAddress as cmFilterSrcMask  
  IpAddress as cmFilterSrcAdrs  
  IpAddress as cmFilterDstMask  
  IpAddress as cmFilterDstAdrs  
  INTEGER as cmFilterIpProtocol  
  INTEGER as cmFilterSrcPortCompare  
  INTEGER as cmFilterSrcPort  
  INTEGER as cmFilterDstPortCompare  
  INTEGER as cmFilterDstPort  
  INTEGER as cmFilterAction  

CmDSLIntervalEntry  
SEQUENCE    
  INTEGER as cmDSLIntervalIndex  
  INTEGER as cmDSLIntervalNumber  
  PerfTotalCount as cmDSLIntervalTxUnderruns  
  PerfTotalCount as cmDSLIntervalRxTruncated  
  PerfTotalCount as cmDSLIntervalRxBig  
  PerfTotalCount as cmDSLIntervalRxAborts  
  PerfTotalCount as cmDSLIntervalRxAlignmentErrors  
  PerfTotalCount as cmDSLIntervalRxCRCErrors  
  PerfTotalCount as cmDSLIntervalRxOverruns  
  PerfTotalCount as cmDSLIntervalRxValidFrames  
  PerfTotalCount as cmDSLIntervalTxValidFrames  
  PerfTotalCount as cmDSLIntervalRxNoBuffers  
  DisplayString as cmDSLIntervalTimeTagBegin  
  DisplayString as cmDSLIntervalTimeTagEnd  
  INTEGER as cmDSLIntervalMinNoiseMargin  
  PerfTotalCount as cmDSLIntervalRxValidOctets  
  PerfTotalCount as cmDSLIntervalTxValidOctets  
  PerfTotalCount as cmDSLIntervalPortUpTime  

CmDSLCurrentEntry  
SEQUENCE    
  INTEGER as cmDSLCurrentIndex  
  PerfTotalCount as cmDSLCurrentTxUnderruns  
  PerfTotalCount as cmDSLCurrentRxTruncated  
  PerfTotalCount as cmDSLCurrentRxBig  
  PerfTotalCount as cmDSLCurrentRxAborts  
  PerfTotalCount as cmDSLCurrentRxAlignmentErrors  
  PerfTotalCount as cmDSLCurrentRxCRCErrors  
  PerfTotalCount as cmDSLCurrentRxOverruns  
  PerfTotalCount as cmDSLCurrentRxValidFrames  
  PerfTotalCount as cmDSLCurrentTxValidFrames  
  PerfTotalCount as cmDSLCurrentRxNoBuffers  
  INTEGER as cmDSLCurrentMinNoiseMargin  
  PerfTotalCount as cmDSLCurrentRxValidOctets  
  PerfTotalCount as cmDSLCurrentTxValidOctets  
  PerfTotalCount as cmDSLCurrentPortUpTime  

CmDSLYesterdaysEntry  
SEQUENCE    
  INTEGER as cmDSLYesterdaysIndex  
  PerfTotalCount as cmDSLYesterdaysTxUnderruns  
  PerfTotalCount as cmDSLYesterdaysRxTruncated  
  PerfTotalCount as cmDSLYesterdaysRxBig  
  PerfTotalCount as cmDSLYesterdaysRxAborts  
  PerfTotalCount as cmDSLYesterdaysRxAlignmentErrors  
  PerfTotalCount as cmDSLYesterdaysRxCRCErrors  
  PerfTotalCount as cmDSLYesterdaysRxOverruns  
  PerfTotalCount as cmDSLYesterdaysRxValidFrames  
  PerfTotalCount as cmDSLYesterdaysTxValidFrames  
  PerfTotalCount as cmDSLYesterdaysRxNoBuffers  
  INTEGER as cmDSLYesterdaysMinNoiseMargin  
  PerfTotalCount as cmDSLYesterdaysRxValidOctets  
  PerfTotalCount as cmDSLYesterdaysTxValidOctets  
  PerfTotalCount as cmDSLYesterdaysPortUpTime  

CmDSLTodaysEntry  
SEQUENCE    
  INTEGER as cmDSLTodaysIndex  
  PerfTotalCount as cmDSLTodaysTxUnderruns  
  PerfTotalCount as cmDSLTodaysRxTruncated  
  PerfTotalCount as cmDSLTodaysRxBig  
  PerfTotalCount as cmDSLTodaysRxAborts  
  PerfTotalCount as cmDSLTodaysRxAlignmentErrors  
  PerfTotalCount as cmDSLTodaysRxCRCErrors  
  PerfTotalCount as cmDSLTodaysRxOverruns  
  PerfTotalCount as cmDSLTodaysRxValidFrames  
  PerfTotalCount as cmDSLTodaysTxValidFrames  
  PerfTotalCount as cmDSLTodaysRxNoBuffers  
  INTEGER as cmDSLTodaysMinNoiseMargin  
  PerfTotalCount as cmDSLTodaysRxValidOctets  
  PerfTotalCount as cmDSLTodaysTxValidOctets  
  PerfTotalCount as cmDSLTodaysPortUpTime  

CmDSL24HrEntry  
SEQUENCE    
  INTEGER as cmDSL24HrIndex  
  PerfTotalCount as cmDSL24HrTxUnderruns  
  PerfTotalCount as cmDSL24HrRxTruncated  
  PerfTotalCount as cmDSL24HrRxBig  
  PerfTotalCount as cmDSL24HrRxAborts  
  PerfTotalCount as cmDSL24HrRxAlignmentErrors  
  PerfTotalCount as cmDSL24HrRxCRCErrors  
  PerfTotalCount as cmDSL24HrRxOverruns  
  PerfTotalCount as cmDSL24HrRxValidFrames  
  PerfTotalCount as cmDSL24HrTxValidFrames  
  PerfTotalCount as cmDSL24HrRxNoBuffers  
  INTEGER as cmDSL24HrMinNoiseMargin  
  PerfTotalCount as cmDSL24HrRxValidOctets  
  PerfTotalCount as cmDSL24HrTxValidOctets  
  PerfTotalCount as cmDSL24HrPortUpTime  

CmCpeDSLIntervalEntry  
SEQUENCE    
  INTEGER as cmCpeDSLIntervalIndex  
  INTEGER as cmCpeDSLIntervalNumber  
  Counter as cmCpeDSLIntervalTxUnderruns  
  Counter as cmCpeDSLIntervalRxTruncated  
  Counter as cmCpeDSLIntervalRxBig  
  Counter as cmCpeDSLIntervalRxAborts  
  Counter as cmCpeDSLIntervalRxAlignmentErrors  
  Counter as cmCpeDSLIntervalRxCRCErrors  
  Counter as cmCpeDSLIntervalRxOverruns  
  Counter as cmCpeDSLIntervalRxValidFrames  
  Counter as cmCpeDSLIntervalTxValidFrames  
  Counter as cmCpeDSLIntervalRxNoBuffers  
  Counter as cmCpeDSLIntervalRxValidOctets  
  Counter as cmCpeDSLIntervalTxValidOctets  

CmIDSLModemEntry  
SEQUENCE    
  CmObjectPII as cmIDSLModemIndex  
  INTEGER as cmIDSLModemOperState  
  INTEGER as cmIDSLModemDataRate  
  INTEGER as cmIDSLModemState  
  INTEGER as cmIDSLModemTerminationMode  
  INTEGER as cmIDSLModemCpeCode  
  Counter as cmIDSLModemSuccessfulTrains  
  Counter as cmIDSLModemFailedTrainingAttempts  
  Counter as cmIDSLModemCpeResponses  
  INTEGER as cmIDSLModemNetworkElements  
  INTEGER as cmIDSLModemActivationInterval  

CmCpeIDSLModemEntry  
SEQUENCE    
  CmObjectPII as cmCpeIDSLModemIndex  
  INTEGER as cmCpeIDSLModemOperState  
  INTEGER as cmCpeIDSLModemDataRate  
  INTEGER as cmCpeIDSLModemState  
  INTEGER as cmCpeIDSLModemTerminationMode  

CmBundleEntry  
SEQUENCE    
  CmObjectPII as cmBundlePII  
  INTEGER as cmBundleRowStatus  
  CmObjectPII as cmBundleMember1PII  
  OCTET STRING as cmBundleMember1EndPointID  
  INTEGER as cmBundleMember1Status  
  CmObjectPII as cmBundleMember2PII  
  OCTET STRING as cmBundleMember2EndPointID  
  INTEGER as cmBundleMember2Status  
  CmObjectPII as cmBundleMember3PII  
  OCTET STRING as cmBundleMember3EndPointID  
  INTEGER as cmBundleMember3Status  
  CmObjectPII as cmBundleMember4PII  
  OCTET STRING as cmBundleMember4EndPointID  
  INTEGER as cmBundleMember4Status  

CmCpeDataPortEntry  
SEQUENCE    
  CmObjectPII as cmCpeDataPortIndex  
  INTEGER as cmCpeDataPortType  
  INTEGER as cmCpeDataPortForceDSR  
  INTEGER as cmCpeDataPortIgnoreDTR  
  INTEGER as cmCpeDataPortIgnoreRTS  
  INTEGER as cmCpeDataPortTerminalTiming  
  INTEGER as cmCpeDataPortTM  
  INTEGER as cmCpeDataPortLL  
  INTEGER as cmCpeDataPortRL  
  INTEGER as cmCpeDataPortDTR  
  INTEGER as cmCpeDataPortRTS  
  INTEGER as cmCpeDataPortDSR  
  INTEGER as cmCpeDataPortCTS  
  INTEGER as cmCpeDataPortDCD  
  INTEGER as cmCpeDataPortTxClockSource  
  INTEGER as cmCpeDataPortDTEDCE  
  INTEGER as cmCpeDataPortCRC  
  INTEGER as cmCpeDataPortClockRate  
  INTEGER as cmCpeDataPortAdminState  
  INTEGER as cmCpeDataPortOperState  
  INTEGER as cmCpeDataPortLoopbackConfig  
  INTEGER as cmCpeDataPortLoopbackStatus  

CmCpeDataPortIntervalEntry  
SEQUENCE    
  CmObjectPII as cmCpeDataPortIntervalIndex  
  INTEGER as cmCpeDataPortIntervalIntervalNumber  
  Counter as cmCpeDataPortIntervalRxFrames  
  Counter as cmCpeDataPortIntervalRxOctets  
  Counter as cmCpeDataPortIntervalRxDiscards  
  Counter as cmCpeDataPortIntervalRxErrors  
  Counter as cmCpeDataPortIntervalTxFrames  
  Counter as cmCpeDataPortIntervalTxOctets  
  Counter as cmCpeDataPortIntervalTxDiscards  
  Counter as cmCpeDataPortIntervalTxErrors  

CmCpeDataPortTotalEntry  
SEQUENCE    
  CmObjectPII as cmCpeDataPortTotalIndex  
  Counter as cmCpeDataPortTotalRxFrames  
  Counter as cmCpeDataPortTotalRxOctets  
  Counter as cmCpeDataPortTotalRxDiscards  
  Counter as cmCpeDataPortTotalRxErrors  
  Counter as cmCpeDataPortTotalTxFrames  
  Counter as cmCpeDataPortTotalTxOctets  
  Counter as cmCpeDataPortTotalTxDiscards  
  Counter as cmCpeDataPortTotalTxErrors  

CmBoardEntry  
SEQUENCE    
  INTEGER as cmBoardIndex  
  INTEGER as cmBoardObjectClass  
  INTEGER as cmBoardOperState  
  TimeTicks as cmBoardUpTime  
  DisplayString as cmBoardFileName  
  DisplayString as cmBoardFileDate  
  INTEGER as cmBoardHwType  
  INTEGER as cmBoardNumPorts  
  DisplayString as cmBoardHwVersion  
  DisplayString as cmBoardSwVersion  
  DisplayString as cmBoardPromVersion  
  INTEGER as cmBoardRole  
  DisplayString as cmBoardConfigChange  
  INTEGER as cmBoardCommand  
  DisplayString as cmBoardSerialNumber  
  INTEGER as cmBoardClusterRole  
  DisplayString as cmBoardInformation  

CmIDSLBoardEntry  
SEQUENCE    
  CmObjectPII as cmIDSLBoardIndex  
  INTEGER as cmIDSLBoardTimingMode  
  INTEGER as cmIDSLBoardTimingStatus  
  INTEGER as cmIDSLBoardTimingAvailable  

CmStateEntry  
SEQUENCE    
  INTEGER as cmStateGenericClass  
  INTEGER as cmStateIndex  
  INTEGER as cmStateObjClass  
  INTEGER as cmStateOperState  
  TimeTicks as cmStateLastChange  

CmShelfEntry  
SEQUENCE    
  CmObjectPII as cmShelfIndex  
  INTEGER as cmShelfObjectClass  
  INTEGER as cmShelfOperability  
  TimeTicks as cmShelfUpTime  
  INTEGER as cmShelfMaster  
  OCTET STRING as cmShelfBoardMap  
  INTEGER as cmShelfCommand  
  INTEGER as cmShelfShelfNumber  

CmCpeBoardEntry  
SEQUENCE    
  INTEGER as cmCpeBoardIndex  
  INTEGER as cmCpeBoardObjectClass  
  INTEGER as cmCpeBoardOperState  
  TimeTicks as cmCpeBoardUpTime  
  DisplayString as cmCpeBoardFileName  
  DisplayString as cmCpeBoardFileDate  
  INTEGER as cmCpeBoardHwType  
  INTEGER as cmCpeBoardNumPorts  
  DisplayString as cmCpeBoardHwVersion  
  DisplayString as cmCpeBoardSwVersion  
  DisplayString as cmCpeBoardPromVersion  
  DisplayString as cmCpeBoardConfigChange  
  INTEGER as cmCpeBoardCommand  
  DisplayString as cmCpeBoardSerialNumber  
  DisplayString as cmCpeBoardVendorDescription  
  OCTET STRING as cmCpeBoardGroupMap  
  INTEGER as cmCpeBoardManagementOptions  

CmHSSIEntry  
SEQUENCE    
  INTEGER as cmHSSIIndex  
  INTEGER as cmHSSIIfIndex  
  INTEGER as cmHSSIDCEReady  
  INTEGER as cmHSSIDTEReady  
  INTEGER as cmHSSIDTEDCE  
  INTEGER as cmHSSILoopback  
  INTEGER as cmHSSITestmode  
  INTEGER as cmHSSISync  
  INTEGER as cmHSSITxClockPresent  
  INTEGER as cmHSSICRC  
  INTEGER as cmHSSIClockRate  
  INTEGER as cmHSSIAdminState  
  INTEGER as cmHSSIOperState  

CmV35Entry  
SEQUENCE    
  INTEGER as cmV35Index  
  INTEGER as cmV35IfIndex  
  INTEGER as cmV35DSR  
  INTEGER as cmV35DCD  
  INTEGER as cmV35CTS  
  INTEGER as cmV35DTR  
  INTEGER as cmV35RTS  
  INTEGER as cmV35DTEDCE  
  INTEGER as cmV35Sync  
  INTEGER as cmV35TxClockSource  
  INTEGER as cmV35CRC  
  INTEGER as cmV35ClockRate  
  INTEGER as cmV35AdminState  
  INTEGER as cmV35OperState  

CmTrapReceiverEntry  
SEQUENCE    
  IpAddress as cmTrapReceiverIPAddr  
  INTEGER as cmTrapReceiverPort  
  DisplayString as cmTrapReceiverCommunity  
  INTEGER as cmTrapReceiverRowStatus  
  DisplayString as cmTrapReceiverOwnerString  

CmTrapEventLogEntry  
SEQUENCE    
  INTEGER as cmTrapEventLogSeqNum  
  INTEGER as cmTrapEventLogType  
  INTEGER as cmTrapEventLogObjectClass  
  CmObjectPII as cmTrapEventLogClassId  
  INTEGER as cmTrapEventLogProbableCause  
  INTEGER as cmTrapEventLogSeverity  
  DisplayString as cmTrapEventLogTimeTag  
  DisplayString as cmTrapEventLogText  

CmTrapAlarmLogEntry  
SEQUENCE    
  INTEGER as cmTrapAlarmLogSeqNum  
  INTEGER as cmTrapAlarmLogType  
  INTEGER as cmTrapAlarmLogObjectClass  
  CmObjectPII as cmTrapAlarmLogClassId  
  INTEGER as cmTrapAlarmLogProbableCause  
  INTEGER as cmTrapAlarmLogSeverity  
  DisplayString as cmTrapAlarmLogTimeTag  
  DisplayString as cmTrapAlarmLogText  

CmTrapTypeLogEntry  
SEQUENCE    
  INTEGER as cmTrapTypeLogType  
  INTEGER as cmTrapTypeLogSeqNum  
  INTEGER as cmTrapTypeLogObjectClass  
  CmObjectPII as cmTrapTypeLogClassId  
  INTEGER as cmTrapTypeLogProbableCause  
  INTEGER as cmTrapTypeLogSeverity  
  DisplayString as cmTrapTypeLogTimeTag  
  DisplayString as cmTrapTypeLogText  

CmTrapDestinationEntry  
SEQUENCE    
  IpAddress as cmTrapDestinationIpAddr  
  INTEGER as cmTrapDestinationPort  
  DisplayString as cmTrapDestinationCommunity  
  INTEGER as cmTrapDestinationRowStatus  
  DisplayString as cmTrapDestinationOwnerString  

CmLoopHistEntry  
SEQUENCE    
  INTEGER as cmLoopHistID  
  INTEGER as cmLoopHistInterface  
  INTEGER as cmLoopHistType  
  INTEGER as cmLoopHistAction  
  INTEGER as cmLoopHistDuration  
  INTEGER as cmLoopHistStatus  
  TimeTicks as cmLoopHistTimeElapsed  
  INTEGER as cmLoopHistTermCode  
  INTEGER as cmLoopHistTxCount  
  INTEGER as cmLoopHistRxErrors  
  DisplayString as cmLoopHistOwnerString  
  INTEGER as cmLoopHistTestParameter1  
  INTEGER as cmLoopHistErrorInfo  

CmVBridgeEntry  
SEQUENCE    
  INTEGER as cmVBridgePII  
  INTEGER as cmVBridgeNMAC  
  INTEGER as cmVBridgeNMulticast  
  INTEGER as cmVBridgeNUnicast  
  INTEGER as cmVBridgeNDSL  
  INTEGER as cmVBridgeNUnknownDest  
  INTEGER as cmVBridgeNOverflow  
  INTEGER as cmVBridgeOption  

CmMACEntry  
SEQUENCE    
  INTEGER as cmMACPII  
  INTEGER as cmMACIndex  
  OCTET STRING as cmMACMAC  
  INTEGER as cmMACTTL  
  INTEGER as cmMACDslPII  

EntryStatus  
INTEGER valid(1), createRequest(2), underCreation(3), invalid(4)    

CmAlarmEntry  
SEQUENCE    
  INTEGER as cmAlarmIndex 1..65535  
  INTEGER as cmAlarmInterval  
  OBJECT IDENTIFIER as cmAlarmVariable  
  INTEGER as cmAlarmSampleType  
  INTEGER as cmAlarmValue  
  INTEGER as cmAlarmStartupAlarm  
  INTEGER as cmAlarmRisingThreshold 0..2147483647  
  INTEGER as cmAlarmFallingThreshold -255..255  
  EntryStatus as cmAlarmStatus  

CmMaintCmdEntry  
SEQUENCE    
  INTEGER as cmMaintCmdCommand  
  INTEGER as cmMaintCmdRowStatus  
  DisplayString as cmMaintCmdStartTime  
  INTEGER as cmMaintCmdRecurrence  
  INTEGER as cmMaintCmdReportingPeriod  
  IpAddress as cmMaintCmdPrimaryIpAddr  
  IpAddress as cmMaintCmdSecondaryIpAddr  
  DisplayString as cmMaintCmdDirectory  
  DisplayString as cmMaintCmdBaseFileName  
  DisplayString as cmMaintCmdUserName  
  DisplayString as cmMaintCmdPassword  
  DisplayString as cmMaintCmdPreviousTime  
  DisplayString as cmMaintCmdNextTime  
  INTEGER as cmMaintCmdCommandStatus  
  DisplayString as cmMaintCmdStatusText  

CmProxyArpEntry  
SEQUENCE    
  CmObjectPII as cmProxyArpPII  
  INTEGER as cmProxyArpRowStatus  

CmTrunkIfEntry  
SEQUENCE    
  CmObjectPII as cmTrunkIfIndex  
  INTEGER as cmTrunkIfOperState  
  INTEGER as cmTrunkIfAdminState  
  Counter as cmTrunkIfSentPackets  
  Counter as cmTrunkIfSentError  
  Counter as cmTrunkIfRecvPackets  
  Counter as cmTrunkIfRecvError  

CmTrunkConnectionEntry  
SEQUENCE    
  CmObjectPII as cmTrunkConnectionTrunkMaster  
  INTEGER as cmTrunkConnectionIndex  
  INTEGER as cmTrunkConnectionOperState  
  CmObjectPII as cmTrunkConnectionLowPII  
  CmObjectPII as cmTrunkConnectionHighPII  

CmTrunkTopoEntry  
SEQUENCE    
  CmObjectPII as cmTrunkTopoSrc  
  CmObjectPII as cmTrunkTopoDest  
  CmObjectPII as cmTrunkTopoInterface  
  INTEGER as cmTrunkTopoNextHop  
  INTEGER as cmTrunkTopoHops  

CmDHCPEntry  
SEQUENCE    
  CmObjectPII as cmDHCPPII  
  INTEGER as cmDHCPRowStatus  
  IpAddress as cmDHCPIpAddress  
  IpAddress as cmDHCPNetMask  

CmEndPointPortEntry  
SEQUENCE    
  CmObjectPII as cmEndPointPortBasePII  
  INTEGER as cmEndPointPortNumber  
  OCTET STRING as cmEndPointPortEndPointID  
  CmObjectPII as cmEndPointPortPartnerPortPII  
  CmObjectPII as cmEndPointPortPartnerBundlePII  
  INTEGER as cmEndPointPortNumMatchingEndPoint  

CmEndPointConfigEntry  
SEQUENCE    
  CmObjectPII as cmEndPointConfigPII  
  INTEGER as cmEndPointConfigRowStatus  
  INTEGER as cmEndPointConfigBulkDownload  
  INTEGER as cmEndPointConfigDownloadStatus  
  DisplayString as cmEndPointConfigDownloadStartTime  
  DisplayString as cmEndPointConfigDownloadEndTime  

CmActiveSessionEntry  
SEQUENCE    
  Counter as cmActiveSessionSessionID  
  DisplayString as cmActiveSessionOperatorName  
  INTEGER as cmActiveSessionContext  
  INTEGER as cmActiveSessionPrivilege  
  IpAddress as cmActiveSessionIpAddress  
  TimeTicks as cmActiveSessionStartTime  
  INTEGER as cmActiveSessionIdleTimeout