COSINE-ORION-MIB

File: COSINE-ORION-MIB.mib (1484610 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC COSINE-GLOBAL-REG

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Counter32
Counter64 Gauge32 Unsigned32
Integer32 TimeTicks IpAddress
NOTIFICATION-TYPE TEXTUAL-CONVENTION DisplayString
PhysAddress MacAddress RowStatus
StorageType TestAndIncr TimeStamp
TruthValue TimeInterval csModules
csOrionMIB

Defined Objects

cosineOrionMod 1.3.6.1.4.1.3085.1.1.2
The MIB module to describe generic objects for IPNOS system.
MODULE-IDENTITY    

csOrionEvents 1.3.6.1.4.1.3085.3.1.1
OBJECT IDENTIFIER    

csOrionEventsInfo 1.3.6.1.4.1.3085.3.1.1.1
OBJECT IDENTIFIER    

csOrionBladeRemoved 1.3.6.1.4.1.3085.3.1.1.1.1
A orionBladeRemoved trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the one of the existing Blade was removed from it's slot.
NOTIFICATION-TYPE    
  csOrionBladeSlotLocation  

csOrionBladeInserted 1.3.6.1.4.1.3085.3.1.1.1.2
A csOrionBladeInserted trap signifies that SNMPv2 entity, acting in an agent role, has detected that the one of the Blade was inserted in the empty slot.
NOTIFICATION-TYPE    
  csOrionBladeSlotLocation  
  csOrionBladeDescr  

csOrionBladeStateChange 1.3.6.1.4.1.3085.3.1.1.1.3
A csOrionBladeStateChange signifies that the SNMPv2 entity acting in an agent role, has detected that a Blade has changed states. A description of the Blade as well as the entered state is identified in this trap.
NOTIFICATION-TYPE    
  csOrionBladeSlotLocation  
  csOrionBladeDescr  
  csOrionBladeState  

csOrionFanStatusChange 1.3.6.1.4.1.3085.3.1.1.1.4
A csOrionFanStatusChange trap signifies that the SNMPv2 entity, acting in an agent role, has detected a change in the status of a fan.
NOTIFICATION-TYPE    
  csOrionFanTray  
  csOrionFanIndex  
  csOrionFanEvent  
  csOrionFanSpeed  
  csOrionFanSpeedThreshold  

csOrionConfigChange 1.3.6.1.4.1.3085.3.1.1.1.5
A csOrionConfigChange trap signifies that the SNMPv2 entity, acting in an agent role, has detected that Configuration was changed. The Trap PDU for this csOrionConfigChange, also carries each of the modified object's OID followed by the changed value. In effect, there are one or more VarBinds follows the csOrionNumConfigChanges object of the Trap PDU. Since these OIDs are the member of one of the table defined in this MIB, type information of the value shall be got from the OID. If the csOrionConfigChangeType is delete, the VarBind that follows the csOrionNumConfigChanges contains the Index(es) of the entry which was deleted. If the csOrionConfigChangeType is addModify, then the VarBind contains all the changed OID-Value pairs followed by the index(es).
NOTIFICATION-TYPE    
  csOrionChangeSourceUserName  
  csOrionChangeTableOID  
  csOrionChangeSource  
  csOrionConfigChangeType  
  csOrionNumConfigChanges  

csOrionTempStatusChange 1.3.6.1.4.1.3085.3.1.1.1.6
This trap indicates that the temperature status of the Orion system has changed states. If the value of csOrionSystemTempStatus is tempRisingAboveUpperCriticalThreshold(1), the given sensor has detected a transition from the normal temperature range to the hot range. If the value of csOrionSystemTempStatus is tempFallingBelow- UpperCriticalThreshold (2), the given sensor has detected a transition from the 'hot' range back down to the normal range.
NOTIFICATION-TYPE    
  csOrionFanTray  
  csOrionTemperatureSensorIndex  
  csOrionTemperatureEvent  
  csOrionTemperature  
  csOrionTemperatureThreshold  

csOrionPowerSupplyStatusChange 1.3.6.1.4.1.3085.3.1.1.1.7
This trap indicates one of the power supplies has changed state. The following events are reported: supplyModuleInserted (1) supplyModuleRemoved (2) inputVoltageRisingAbovePastLowerCriticalThreshold (3) inputVoltageFallingBelowLowerCriticalThreshold (4) outputVoltageRisingAboveLowerCriticalThreshold (5) outputVoltageFallingBelowLowerCriticalThreshold (6) outputCurrentRisingAboveUpperCriticalThreshold (7) outputCurrentFallingBelowUpperCriticalThreshold (8) auxVoltageRisingAboveLowerCriticalThreshold (9) auxVoltageFallingBelowLowerCriticalThreshold (10) temperatureRisingAboveUpperCriticalThreshold (11) temperatureFallingBelowUpperCriticalThreshold (12) currentShareRisingAboveLowerCriticalThreshold (13) currentShareFallingBelowLowerCriticalThreshold (14)
NOTIFICATION-TYPE    
  csOrionPowerSupplyIndex  
  csOrionPowerSupplyEvent  

csOrionLogLinkDown 1.3.6.1.4.1.3085.3.1.1.1.8
This trap indicates that a Logical Link on the Orion is about to enter the down state.
NOTIFICATION-TYPE    
  csOrionLogLinkSlotIndex  
  csOrionLogLinkModuleIndex  
  csOrionLogLinkPortIndex  
  csOrionLogLinkChannelIndex  
  csOrionLogLinkSubIfIndex  

csOrionLogLinkUp 1.3.6.1.4.1.3085.3.1.1.1.9
This trap indicates that a Logical Link on the Orion is about to enter the up state.
NOTIFICATION-TYPE    
  csOrionLogLinkSlotIndex  
  csOrionLogLinkModuleIndex  
  csOrionLogLinkPortIndex  
  csOrionLogLinkChannelIndex  
  csOrionLogLinkSubIfIndex  

csOrionVIfDown 1.3.6.1.4.1.3085.3.1.1.1.10
A csOrionVIfDown trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the csOrionVIfOperStatus object for one of its communication links is about to enter the down state from some other state (but not from the notPresent state). This other state is indicated by the included value of csOrionVIfOperStatus.
NOTIFICATION-TYPE    
  csOrionGlobalVPNIndex  
  csOrionVPNVRouterIndex  
  csOrionVIfIndex  
  csOrionVIfRowStatus  
  csOrionVIfOperStatus  

csOrionVIfUp 1.3.6.1.4.1.3085.3.1.1.1.11
A csOrionVIfUp trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links left the down state and transitioned into some other state (but not into the notPresent state). This other state is indicated by the included value of ifOperStatus.
NOTIFICATION-TYPE    
  csOrionGlobalVPNIndex  
  csOrionVPNVRouterIndex  
  csOrionVIfIndex  
  csOrionVIfRowStatus  
  csOrionVIfOperStatus  

csOrionOspfIfStateChange 1.3.6.1.4.1.3085.3.1.1.1.12
An csOspfIfStateChange trap signifies that there has been a change in the state of a non-virtual OSPF interface. This trap should be generated when the interface state regresses (e.g., goes from Dr to Down) or progresses to a terminal state (i.e., Point-to-Point, DR Other, Dr, or Backup).
NOTIFICATION-TYPE    
  csOrionGlobalVPNIndex  
  csOrionVPNVRouterIndex  
  csOspfRouterId  
  csOspfIfIpAddress  
  csOspfAddressLessIf  
  csOspfIfState  

csOrionOspfVirtIfStateChange 1.3.6.1.4.1.3085.3.1.1.1.13
A csOspfIfStateChange trap signifies that there has been a change in the state of an OSPF vir- tual interface. This trap should be generated when the inter- face state regresses (e.g., goes from Point- to-Point to Down) or progresses to a terminal state (i.e., Point-to-Point).
NOTIFICATION-TYPE    
  csOrionGlobalVPNIndex  
  csOrionVPNVRouterIndex  
  csOspfRouterId  
  csOspfVirtIfAreaId  
  csOspfVirtIfNeighbor  
  csOspfVirtIfState  

csOrionOspfNbrStateChange 1.3.6.1.4.1.3085.3.1.1.1.14
A csOspfNbrStateChange trap signifies that there has been a change in the state of a non- virtual OSPF neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., 2-Way or Full). When an neighbor transitions from or to Full on non-broadcast multi-access and broadcast networks, the trap should be gen- erated by the designated router. A designated router transitioning to Down will be noted by csOspfIfStateChange.
NOTIFICATION-TYPE    
  csOrionGlobalVPNIndex  
  csOrionVPNVRouterIndex  
  csOspfRouterId  
  csOspfNbrIpAddr  
  csOspfNbrAddressLessIndex  
  csOspfNbrRtrId  
  csOspfNbrState  

csOrionOspfVirtNbrStateChange 1.3.6.1.4.1.3085.3.1.1.1.15
An csOspfIfStateChange trap signifies that there has been a change in the state of an OSPF vir- tual neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., Full).
NOTIFICATION-TYPE    
  csOrionGlobalVPNIndex  
  csOrionVPNVRouterIndex  
  csOspfRouterId  
  csOspfVirtNbrArea  
  csOspfVirtNbrRtrId  
  csOspfVirtNbrState  

csOrionOspfIfConfigError 1.3.6.1.4.1.3085.3.1.1.1.16
An csOspfIfConfigError trap signifies that a packet has been received on a non-virtual in- terface from a router whose configuration parameters conflict with this router's confi- guration parameters. Note that the event op- tionMismatch should cause a trap only if it prevents an adjacency from forming.
NOTIFICATION-TYPE    
  csOrionGlobalVPNIndex  
  csOrionVPNVRouterIndex  
  csOspfRouterId  
  csOspfIfIpAddress  
  csOspfAddressLessIf  
  csOspfPacketSrc  
  csOspfConfigErrorType  
  csOspfPacketType  

csOrionOspfVirtIfConfigError 1.3.6.1.4.1.3085.3.1.1.1.17
An csOspfConfigError trap signifies that a pack- et has been received on a virtual interface from a router whose configuration parameters conflict with this router's configuration parameters. Note that the event optionMismatch should cause a trap only if it prevents an ad- jacency from forming.
NOTIFICATION-TYPE    
  csOrionGlobalVPNIndex  
  csOrionVPNVRouterIndex  
  csOspfRouterId  
  csOspfVirtIfAreaId  
  csOspfVirtIfNeighbor  
  csOspfConfigErrorType  
  csOspfPacketType  

csOrionOspfIfAuthFailure 1.3.6.1.4.1.3085.3.1.1.1.18
An csOspfIfAuthFailure trap signifies that a packet has been received on a non-virtual in- terface from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type.
NOTIFICATION-TYPE    
  csOrionGlobalVPNIndex  
  csOrionVPNVRouterIndex  
  csOspfRouterId  
  csOspfIfIpAddress  
  csOspfAddressLessIf  
  csOspfPacketSrc  
  csOspfConfigErrorType  
  csOspfPacketType  

csOrionOspfVirtIfAuthFailure 1.3.6.1.4.1.3085.3.1.1.1.19
An csOspfVirtIfAuthFailure trap signifies that a packet has been received on a virtual interface from a router whose authentication key or au- thentication type conflicts with this router's authentication key or authentication type.
NOTIFICATION-TYPE    
  csOrionGlobalVPNIndex  
  csOrionVPNVRouterIndex  
  csOspfRouterId  
  csOspfVirtIfAreaId  
  csOspfVirtIfNeighbor  
  csOspfConfigErrorType  
  csOspfPacketType  

csOrionOspfIfRxBadPacket 1.3.6.1.4.1.3085.3.1.1.1.20
An csOspfIfRxBadPacket trap signifies that an OSPF packet has been received on a non-virtual interface that cannot be parsed.
NOTIFICATION-TYPE    
  csOrionGlobalVPNIndex  
  csOrionVPNVRouterIndex  
  csOspfRouterId  
  csOspfIfIpAddress  
  csOspfAddressLessIf  
  csOspfPacketSrc  
  csOspfPacketType  

csOrionOspfVirtIfRxBadPacket 1.3.6.1.4.1.3085.3.1.1.1.21
An csOspfRxBadPacket trap signifies that an OSPF packet has been received on a virtual interface that cannot be parsed.
NOTIFICATION-TYPE    
  csOrionGlobalVPNIndex  
  csOrionVPNVRouterIndex  
  csOspfRouterId  
  csOspfVirtIfAreaId  
  csOspfVirtIfNeighbor  
  csOspfPacketType  

csOrionOspfTxRetransmit 1.3.6.1.4.1.3085.3.1.1.1.22
An csOspfTxRetransmit trap signifies than an OSPF packet has been retransmitted on a non- virtual interface. All packets that may be re- transmitted are associated with an LSDB entry. The LS type, LS ID, and Router ID are used to identify the LSDB entry.
NOTIFICATION-TYPE    
  csOrionGlobalVPNIndex  
  csOrionVPNVRouterIndex  
  csOspfRouterId  
  csOspfIfIpAddress  
  csOspfAddressLessIf  
  csOspfNbrRtrId  
  csOspfPacketType  
  csOspfLsdbType  
  csOspfLsdbLsid  
  csOspfLsdbRouterId  

csOrionOspfVirtIfTxRetransmit 1.3.6.1.4.1.3085.3.1.1.1.23
An csOspfTxRetransmit trap signifies than an OSPF packet has been retransmitted on a virtual interface. All packets that may be retransmit- ted are associated with an LSDB entry. The LS type, LS ID, and Router ID are used to identify the LSDB entry.
NOTIFICATION-TYPE    
  csOrionGlobalVPNIndex  
  csOrionVPNVRouterIndex  
  csOspfRouterId  
  csOspfVirtIfAreaId  
  csOspfVirtIfNeighbor  
  csOspfPacketType  
  csOspfLsdbType  
  csOspfLsdbLsid  
  csOspfLsdbRouterId  

csOrionOspfOriginateLsa 1.3.6.1.4.1.3085.3.1.1.1.24
An csOspfOriginateLsa trap signifies that a new LSA has been originated by this router. This trap should not be invoked for simple refreshes of LSAs (which happesn every 30 minutes), but instead will only be invoked when an LSA is (re)originated due to a topology change. Addi- tionally, this trap does not include LSAs that are being flushed because they have reached MaxAge.
NOTIFICATION-TYPE    
  csOrionGlobalVPNIndex  
  csOrionVPNVRouterIndex  
  csOspfRouterId  
  csOspfLsdbAreaId  
  csOspfLsdbType  
  csOspfLsdbLsid  
  csOspfLsdbRouterId  

csOrionOspfMaxAgeLsa 1.3.6.1.4.1.3085.3.1.1.1.25
An csOspfMaxAgeLsa trap signifies that one of the LSA in the router's link-state database has aged to MaxAge.
NOTIFICATION-TYPE    
  csOrionGlobalVPNIndex  
  csOrionVPNVRouterIndex  
  csOspfRouterId  
  csOspfLsdbAreaId  
  csOspfLsdbType  
  csOspfLsdbLsid  
  csOspfLsdbRouterId  

csOrionOspfLsdbOverflow 1.3.6.1.4.1.3085.3.1.1.1.26
An csOspfLsdbOverflow trap signifies that the number of LSAs in the router's link-state data- base has exceeded csOspfExtLsdbLimit.
NOTIFICATION-TYPE    
  csOrionGlobalVPNIndex  
  csOrionVPNVRouterIndex  
  csOspfRouterId  
  csOspfExtLsdbLimit  

csOrionOspfLsdbApproachingOverflow 1.3.6.1.4.1.3085.3.1.1.1.27
An csOspfLsdbApproachingOverflow trap signifies that the number of LSAs in the router's link- state database has exceeded ninety percent of csOspfExtLsdbLimit.
NOTIFICATION-TYPE    
  csOrionGlobalVPNIndex  
  csOrionVPNVRouterIndex  
  csOspfRouterId  
  csOspfExtLsdbLimit  

csOrionCustomerVrUp 1.3.6.1.4.1.3085.3.1.1.1.28
A csOrionCustomerVrUp trap signifies that a Virtual Router which services a customer network has has come up.
NOTIFICATION-TYPE    
  csOrionGlobalVPNIndex  
  csOrionVPNVRouterIndex  

csOrionCustomerVrDown 1.3.6.1.4.1.3085.3.1.1.1.29
A csOrionCustomerVrDown trap signifies that a Virtual Router which services a customer network has gone down.
NOTIFICATION-TYPE    
  csOrionGlobalVPNIndex  
  csOrionVPNVRouterIndex  

csOrionServiceProviderVrUp 1.3.6.1.4.1.3085.3.1.1.1.30
A csOrionServiceProviderVrUp trap signifies that a Virtual Router which is designated as a service provider VR has has come up.
NOTIFICATION-TYPE    
  csOrionGlobalVPNIndex  
  csOrionVPNVRouterIndex  

csOrionServiceProviderVrDown 1.3.6.1.4.1.3085.3.1.1.1.31
A csOrionServiceProviderVrDown trap signifies that a Virtual Router which is designated as a service provider VR has gone down.
NOTIFICATION-TYPE    
  csOrionGlobalVPNIndex  
  csOrionVPNVRouterIndex  

csOrionControlVrUp 1.3.6.1.4.1.3085.3.1.1.1.32
A csOrionControlVrUp trap signifies that a Virtual Router which is designated as a control VR has come up. If a csOrionBladeRemoved Trap precedes this trap and if that blade is the master control blade then this trap might be from the control VR of the new master blade.
NOTIFICATION-TYPE    
  csOrionGlobalVPNIndex  
  csOrionVPNVRouterIndex  

csOrionControlVrDown 1.3.6.1.4.1.3085.3.1.1.1.33
A csOrionControlVrDown trap signifies that a Virtual Router which is designated as a control VR has gone down.
NOTIFICATION-TYPE    
  csOrionGlobalVPNIndex  
  csOrionVPNVRouterIndex  

csOrionServiceProviderVIfUp 1.3.6.1.4.1.3085.3.1.1.1.34
A csOrionServiceProviderVIfUp trap signifies that a Virtual Interface on a Service Provider VR has come up.
NOTIFICATION-TYPE    
  csOrionGlobalVPNIndex  
  csOrionVPNVRouterIndex  
  csOrionVIfIndex  

csOrionServiceProviderVIfDown 1.3.6.1.4.1.3085.3.1.1.1.35
A csOrionServiceProviderVIfDown trap signifies that a Virtual Interface on a Service Provider VR has gone down.
NOTIFICATION-TYPE    
  csOrionGlobalVPNIndex  
  csOrionVPNVRouterIndex  
  csOrionVIfIndex  

csOrionLossOfSignal 1.3.6.1.4.1.3085.3.1.1.1.36
A csOrionLossOfSignal trap signifies that a physical port on a blade experiencing loss of signal(LOS) on the line. Applicable to both DS3 and E3.
NOTIFICATION-TYPE    
  csOrionBladeSlotLocation  
  csOrionModuleIndex  
  csOrionPortIndex  
  csOrionBladeType  

csOrionLossOfFrame 1.3.6.1.4.1.3085.3.1.1.1.37
A csOrionLossOfFrame trap signifies that a physical port on a blade experiencing loss of Frame(LOF) on the line. Applicable to both DS3 and OC3.
NOTIFICATION-TYPE    
  csOrionBladeSlotLocation  
  csOrionModuleIndex  
  csOrionPortIndex  
  csOrionBladeType  

csOrionDs3AlarmIndication 1.3.6.1.4.1.3085.3.1.1.1.38
A csOrionAlarmIndication trap signifies that a physical port on a blade generates an alarm (AIS) that indicates a failure in upstream far end.
NOTIFICATION-TYPE    
  csOrionBladeSlotLocation  
  csOrionModuleIndex  
  csOrionPortIndex  
  csOrionBladeType  

csOrionLossOfClock 1.3.6.1.4.1.3085.3.1.1.1.39
A csOrionLossOfClock trap signifies that a physical port on a blade experiencing loss of Clock(LOC) on the line. Applicable to both DS3 and OC3.
NOTIFICATION-TYPE    
  csOrionBladeSlotLocation  
  csOrionModuleIndex  
  csOrionPortIndex  
  csOrionBladeType  

csOrionBladeRestore 1.3.6.1.4.1.3085.3.1.1.1.40
A csOrionBladeRestore trap signifies that a blade had been restored successfully or not. The VarBind that follow contains the list of VPN/VRs affected.
NOTIFICATION-TYPE    
  csOrionRestoreBladeStatus  
  csOrionRestoreSlotIndex  
  csOrionRestoreNumVRs  

csOrionDs3PortIdle 1.3.6.1.4.1.3085.3.1.1.1.41
A csOrionDs3PortIdle trap signifies that a physical port on a blade received an IDLE signal from the far end indicating it is unequipped to handle any data transfer.
NOTIFICATION-TYPE    
  csOrionBladeSlotLocation  
  csOrionModuleIndex  
  csOrionPortIndex  
  csOrionBladeType  

csOrionAlarmClear 1.3.6.1.4.1.3085.3.1.1.1.42
A csOrionAlarmClear trap signifies that a physical port on a blade, which had sent an alarm earlier, indicates that the previous alarm is cleared. Applicable to DS3.
NOTIFICATION-TYPE    
  csOrionBladeSlotLocation  
  csOrionModuleIndex  
  csOrionPortIndex  
  csOrionBladeType  
  csOrionAlarmType  

csOrionOc3Alarm 1.3.6.1.4.1.3085.3.1.1.1.43
A csOrionOc3Alarm trap signifies that an OC3 physical port on a blade, which had sent an alarm.
NOTIFICATION-TYPE    
  csOrionBladeSlotLocation  
  csOrionModuleIndex  
  csOrionPortIndex  
  csOrionOc3AlarmType  
  csOrionAlarmAffectType  
  csOrionAlarmSeverityType  

csOrionOc3AlarmClear 1.3.6.1.4.1.3085.3.1.1.1.44
A csOrionOc3AlarmClear trap signifies that an OC3 physical port on a blade, which had sent an alarm earlier, indicates that the prvious alarm is cleared.
NOTIFICATION-TYPE    
  csOrionBladeSlotLocation  
  csOrionModuleIndex  
  csOrionPortIndex  
  csOrionOc3AlarmType  
  csOrionAlarmAffectType  
  csOrionAlarmSeverityType  

csOrionPacketRingStatusChange 1.3.6.1.4.1.3085.3.1.1.1.45
A csOrionPacketRingStatusChange trap signifies that the packet ring status of the chassis has changed. If both endpoints change from zero to r[1,26], that means the status has changed to protection ring. If both endpoints change from r[1,26] to zero, that means the status has changed to no protection ring. If one/both endpoints change from r[1,26] to different r[1,26], that means the topology has changed but not ring status.
NOTIFICATION-TYPE    
  csOrionPacketRingPrimToProtCurrentEndpointSlot  
  csOrionPacketRingPrimToProtPreviousEndpointSlot  
  csOrionPacketRingProtToPrimCurrentEndpointSlot  
  csOrionPacketRingProtToPrimPreviousEndpointSlot  

csOrionInletAirTempStatusChange 1.3.6.1.4.1.3085.3.1.1.1.46
This trap indicates that the inlet air temperature has changed states. If the value of csOrionSystemTempStatus is tempRisingAboveUpperCriticalThreshold(1), the given sensor has detected a transition from the normal temperature range to the hot range. If the value of csOrionSystemTempStatus is tempFallingBelowUpperCriticalThreshold (2), the given sensor has detected a transition from the 'hot' range back down to the normal range.
NOTIFICATION-TYPE    
  csOrionTempAirFlowCard  
  csOrionTemperatureSensorIndex  
  csOrionTemperatureEvent  
  csOrionTemperature  
  csOrionTemperatureThreshold  

csOrionDevicePresent 1.3.6.1.4.1.3085.3.1.1.1.47
This trap indicates that a given I2C device is present. This trap will occur on 9500 and 3500 chassis only.
NOTIFICATION-TYPE    
  csOrionI2CDeviceId  
  csOrionI2CDevicePresent  

csOrionPowerSupplyMonitorStatusChange 1.3.6.1.4.1.3085.3.1.1.1.48
This trap indicates a power supply monitor event. The following events are reported: redundancyRegained (1) redundancyLost (2) auxVoltageRisingAboveLowerCriticalThreshold (3) auxVoltageFallingBelowLowerCriticalThreshold (4)
NOTIFICATION-TYPE    
  csOrionPowerSupplyMonitorEvent  

csOrionFarEndReceiveFailure 1.3.6.1.4.1.3085.3.1.1.1.49
A csOrionFarEndReceiveFailure trap signifies that the physical port on the remote end is receiving an alarm. Applicable to DS3.
NOTIFICATION-TYPE    
  csOrionPortIndex  
  csOrionBladeType  

csOrionCBRFileError 1.3.6.1.4.1.3085.3.1.1.1.50
This trap reports on the status of the copy operation of a system file from master to standby control blade. Generated only if there is control blade redundancy (cbr).
NOTIFICATION-TYPE    
  cbrFileType  
  cbrFileName  
  cbrFileErrorType  
  cbrFileErrorCode  

csOrionBgpMaxPfxLimit 1.3.6.1.4.1.3085.3.1.1.1.51
This trap reports that max-prefix limit has been reached for the given neighbor
NOTIFICATION-TYPE    
  csBgpGenMaxPfx  
  csOrionAlarmAffectType  
  csOrionAlarmSeverityType  
  csOrionBgpMaxPfxLimitEvent  

csOrionBgpNbrMaxPfxLimit 1.3.6.1.4.1.3085.3.1.1.1.52
This trap reports that max-prefix limit has been reached for the given neighbor
NOTIFICATION-TYPE    
  csBgpNbrRemoteAS  
  csBgpNbrMaxPfx  
  csOrionAlarmAffectType  
  csOrionAlarmSeverityType  
  csOrionBgpMaxPfxLimitEvent  

csOrionSystem 1.3.6.1.4.1.3085.3.1.2
OBJECT IDENTIFIER    

csOrionGeneralSys 1.3.6.1.4.1.3085.3.1.2.1
OBJECT IDENTIFIER    

csOrionSystemIpAddress 1.3.6.1.4.1.3085.3.1.2.1.1
A system Ip address.
OBJECT-TYPE    
  IpAddress  

csOrionSystemNetMask 1.3.6.1.4.1.3085.3.1.2.1.2
A system network mask.
OBJECT-TYPE    
  IpAddress  

csOrionSystemGatewayAddress 1.3.6.1.4.1.3085.3.1.2.1.3
A system default gateway address.
OBJECT-TYPE    
  IpAddress  

csOrionSystemFwVer 1.3.6.1.4.1.3085.3.1.2.1.4
The fw version used by Orion
OBJECT-TYPE    
  DisplayString  

csOrionSystemMajorVer 1.3.6.1.4.1.3085.3.1.2.1.5
The version for a Orion as a system.
OBJECT-TYPE    
  DisplayString  

csOrionSystemNumberOfBlades 1.3.6.1.4.1.3085.3.1.2.1.6
OBJECT-TYPE    
  Integer32 0..26  

csOrionSystemTempStatus 1.3.6.1.4.1.3085.3.1.2.1.7
This object identifies the current temperature status within the Orion system. If this object has the value normal(1), the temperature is within the normal range. If the status is hot(2), the temperature is above the normal range and measures should be taken to bring the temperature down.
OBJECT-TYPE    
  INTEGER normal(1), hot(2)  

csOrionSystemReset 1.3.6.1.4.1.3085.3.1.2.1.8
The software reset. It is an action object such that when set to 'reset' will reset all the blades. Setting it to 'none' has no effect, and when it is retrieved the value will always be 'none' .
OBJECT-TYPE    
  INTEGER none(1), reset(2)  

csOrionSystemTime 1.3.6.1.4.1.3085.3.1.2.1.9
To set the system date & time with the standard format specified by RFC 2579. Below is the date-time specification. (Display Format: YYYY-MM-DD,HH:MM:SS.ss,+/-:HH:MM) field contents range ----- -------- ----- 1 year* 1999..2098 2 month 1..12 3 day 1..31 4 hour 0..23 5 minutes 0..59 6 seconds 0..60 (use 60 for leap-second) 7 deci-seconds 0..9 8 direction from UTC '+' / '-' 9 hours from UTC* 0..13 10 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - daylight saving time in New Zealand is +13 For example, Tuesday May 26, 2000 at 1:30:15 PM EDT would be displayed as: 2000-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present.
OBJECT-TYPE    
  DisplayString SIZE(0..50)  

csOrionSystemVersionNum 1.3.6.1.4.1.3085.3.1.2.1.10
The system version number applies to the IPSX system as a whole. This number has the format: a.b.c.d where 'a.b' is major release number, 'c' is the patch nubmer, and 'd' is the internal release number.
OBJECT-TYPE    
  DisplayString  

csOrionSystemShutdown 1.3.6.1.4.1.3085.3.1.2.1.11
The software shutdown. It is an action object such that when set to 'shutdown' will stop the file-system of all the blades. that when set to 'shutdown' will stop the file-system of all the blades. Setting it to 'none' has no effect, and when it is retrieved the value will always be 'none' .
OBJECT-TYPE    
  INTEGER none(1), shutdown(2)  

csOrionSystemControlBladeFailOver 1.3.6.1.4.1.3085.3.1.2.1.12
When set to 'failover', the master control blade switches over to stand-by control blade. Setting it to 'none' has no effect, and when it is retrieved the value will always be 'none' .
OBJECT-TYPE    
  INTEGER none(1), failover(2)  

csOrionSystemCLIRadiusAuthentication 1.3.6.1.4.1.3085.3.1.2.1.13
NOTE: This object has been replaced by csOrionSystemLoginServer. When this object is set to radius, radius server will be used to authenticate a user logging into a CLI session. When this object is set to localDatabase, the password file resided locally will be used to authenticate the CLI user.
OBJECT-TYPE    
  INTEGER radius(1), localDatabase(2)  

csOrionBoot 1.3.6.1.4.1.3085.3.1.2.2
OBJECT IDENTIFIER    

csOrionSystemBootTable 1.3.6.1.4.1.3085.3.1.2.2.1
A list of Sources from which this Orion will boot.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionSystemBootEntry

csOrionSystemBootEntry 1.3.6.1.4.1.3085.3.1.2.2.1.1
An entry containing Boot information applicable to this Orion System. Note, currently there is only one entry in this table. More entries may be added in future releases.
OBJECT-TYPE    
  CsOrionSystemBootEntry  

csOrionSystemBootIndex 1.3.6.1.4.1.3085.3.1.2.2.1.1.1
A unique value, greater than zero, for each boot record.
OBJECT-TYPE    
  Integer32 1..2147483647  

csOrionSystemBootImageName1 1.3.6.1.4.1.3085.3.1.2.2.1.1.2
The absolute path and file name for the boot image. If this string is prefaced with 'FLSH', tftp will be used to boot over the network. This applies to all 6 images.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

csOrionSystemBootImageName2 1.3.6.1.4.1.3085.3.1.2.2.1.1.3
The 2nd absolute path and file name for the boot image. This will be used only if the previous boot images fail.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

csOrionSystemBootImageName3 1.3.6.1.4.1.3085.3.1.2.2.1.1.4
The 3rd absolute path and file name for the boot image. This will be used only if the previous boot images fail.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

csOrionSystemBootImageName4 1.3.6.1.4.1.3085.3.1.2.2.1.1.5
The 4th absolute path and file name for the boot image. This will be used only if the previous boot images fail.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

csOrionSystemBootImageName5 1.3.6.1.4.1.3085.3.1.2.2.1.1.6
The 5th absolute path and file name for the boot image. This will be used only if the previous boot images fail.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

csOrionSystemBootImageName6 1.3.6.1.4.1.3085.3.1.2.2.1.1.7
The 6th absolute path and file name for the boot image. This will be used only if the previous boot images fail.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

csOrionSystemBootPort 1.3.6.1.4.1.3085.3.1.2.2.1.1.8
When booting over the network, the port used to load the image
OBJECT-TYPE    
  Integer32 1..8  

csOrionSystemBootServerAddress 1.3.6.1.4.1.3085.3.1.2.2.1.1.9
A boot server Ip Address. Note, this only applies if this entry specifies booting over the network.
OBJECT-TYPE    
  IpAddress  

csOrionSystemBootLocalIpAddr 1.3.6.1.4.1.3085.3.1.2.2.1.1.10
When booting over the network using a boot protocol that does not supply a source IP address, This object specifies the local IP address to use when booting via the network.
OBJECT-TYPE    
  IpAddress  

csOrionSystemBootLocalIpMask 1.3.6.1.4.1.3085.3.1.2.2.1.1.11
When booting over the network using a boot protocol that does not supply a source IP address, This object specifies the local IP address mask to use when booting via the network.
OBJECT-TYPE    
  IpAddress  

csOrionSystemBootDefGw 1.3.6.1.4.1.3085.3.1.2.2.1.1.12
When booting over the network, this object is used to identify the gateway to use in communicating with the boot server.
OBJECT-TYPE    
  IpAddress  

csOrionSystemBootConfig 1.3.6.1.4.1.3085.3.1.2.2.1.1.13
The absolute path and file name for the configuration file. Note, the configuration file must be on the local flash.
OBJECT-TYPE    
  DisplayString SIZE(0..30)  

csOrionSystemBootSaveImage 1.3.6.1.4.1.3085.3.1.2.2.1.1.14
This object specifies whether the IPSX system will save the boot image in local flash. Note this applies only if the csOrionSystemBootProtocol is tftp(2).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

csOrionSystemBootUserName 1.3.6.1.4.1.3085.3.1.2.2.1.1.15
User Name to use if the download is via FTP
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

csOrionSystemBootUserPassword 1.3.6.1.4.1.3085.3.1.2.2.1.1.16
Password to use if the download is via FTP
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

csOrionSystemBootInternalNwAddr 1.3.6.1.4.1.3085.3.1.2.2.1.1.17
All the blades in the system make a internal network. This attribute defines the network part (255.255.0.0) of this subnet. Default is 172.168.0.0
OBJECT-TYPE    
  IpAddress  

csOrionSystemBootConcurrentDownloads 1.3.6.1.4.1.3085.3.1.2.2.1.1.18
Maximum number of downloads that can occur concurrently. if configured to 0, then there is no limit to number of simultaneous download sessions. This is useful if the TFTP/FTP server cannot handle a large number of TFTP/FTP sessions
OBJECT-TYPE    
  Integer32  

csOrionLogin 1.3.6.1.4.1.3085.3.1.2.3
OBJECT IDENTIFIER    

csOrionSystemLoginUserTable 1.3.6.1.4.1.3085.3.1.2.3.1
A login information for Orion, using console or telnet.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionSystemLoginUserEntry

csOrionSystemLoginUserEntry 1.3.6.1.4.1.3085.3.1.2.3.1.1
An entry contains information for one CLI login user.
OBJECT-TYPE    
  CsOrionSystemLoginUserEntry  

csOrionSystemLoginUserName 1.3.6.1.4.1.3085.3.1.2.3.1.1.1
The login user name.
OBJECT-TYPE    
  DisplayString SIZE(1..80)  

csOrionSystemLoginUserDesc 1.3.6.1.4.1.3085.3.1.2.3.1.1.2
User information
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

csOrionSystemLoginUserPassword 1.3.6.1.4.1.3085.3.1.2.3.1.1.3
A sequence of alphabetical and numerical characters, MUST not be less than 8 characters.
OBJECT-TYPE    
  DisplayString SIZE(8..80)  

csOrionSystemLoginUserRowStatus 1.3.6.1.4.1.3085.3.1.2.3.1.1.4
A row status type for the table entry.
OBJECT-TYPE    
  RowStatus  

csOrionSystemLoginUserOperStatus 1.3.6.1.4.1.3085.3.1.2.3.1.1.5
A operational status for this table entry.
OBJECT-TYPE    
  OperStatus  

csOrionSystemLoginRoleTable 1.3.6.1.4.1.3085.3.1.2.3.2
A role for a login user.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionSystemLoginRoleEntry

csOrionSystemLoginRoleEntry 1.3.6.1.4.1.3085.3.1.2.3.2.1
An entry contains information for one role type. A role is a group of feature access permissions. Each login user is associated with a single role.
OBJECT-TYPE    
  CsOrionSystemLoginRoleEntry  

csOrionSystemLoginRoleName 1.3.6.1.4.1.3085.3.1.2.3.2.1.1
The name of a role.
OBJECT-TYPE    
  DisplayString SIZE(1..80)  

csOrionSystemLoginRoleDesc 1.3.6.1.4.1.3085.3.1.2.3.2.1.2
Information about the role.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

csOrionSystemLoginRoleAccessRights 1.3.6.1.4.1.3085.3.1.2.3.2.1.3
Access rights of a role are a list of feature-wise permissions. The permissions of a feature are represented by a 4-byte tuple {rights (1-byte),featureid(3-bytes)}. The features in this list are in the ascending order of their feature-id. rights: Access rights are classified into the following categories (given below along with the mapping to unix-style read,write and execute permissions): 0 : none (rwx-style = ---) 1 : all (rwx-style = rwx) 2 : view (rwx-style = r--) 3 : config (rwx-style = rw-) 4 : monitor (rwx-style = r-x) Feature-id's: A feature is a set of commands which are grouped into a read, write or execute command-type. all (1), access (2), clear (3), device (4), dialup (5), diff_serve (6), event_log (7), field (8), firewall (9), froip (10), nat (11), routing (12), service_selection (13), show (14), tunnel (15), vpnvr (16)
OBJECT-TYPE    
  OCTET STRING SIZE(0..65535)  

csOrionSystemLoginRoleRowStatus 1.3.6.1.4.1.3085.3.1.2.3.2.1.4
A row status type for the table entry.
OBJECT-TYPE    
  RowStatus  

csOrionSystemLoginDomainTable 1.3.6.1.4.1.3085.3.1.2.3.3
A domain for a login user.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionSystemLoginDomainEntry

csOrionSystemLoginDomainEntry 1.3.6.1.4.1.3085.3.1.2.3.3.1
An entry contains information for one domain. A domain is a group of object instances which defines the scope a role for for a user. Each login user is associated with a single domain.
OBJECT-TYPE    
  CsOrionSystemLoginDomainEntry  

csOrionSystemLoginDomainName 1.3.6.1.4.1.3085.3.1.2.3.3.1.1
The name of an access domain.
OBJECT-TYPE    
  DisplayString SIZE(1..80)  

csOrionSystemLoginDomainDesc 1.3.6.1.4.1.3085.3.1.2.3.3.1.2
Information about the access domain.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

csOrionSystemLoginDomainVRList 1.3.6.1.4.1.3085.3.1.2.3.3.1.3
A list of VPN/VRs a user can access. A VPN/VR is represented as /. The VPN/VRs in the list are separated either by a space(s). The following are valid wildcards for a VR: /* : All VRs with the given VPN. */* : All VRs. If it used then it should be the only entry in the list.
OBJECT-TYPE    
  LongDisplayString SIZE(0..500)  

csOrionSystemLoginDomainInterfaceList 1.3.6.1.4.1.3085.3.1.2.3.3.1.4
List of interfaces which an user can access. The interfaces in the list are separated either by space(s). Each interface is represented as follows: [/[:channel-range>[:]]] where each range above has the follog syntax: = { * | | - } If the optional elements (,,etc) are not specified they default to '*', which denotes all values. is always less than . If '*' or range is specified for an element then all following elements MUST be wildcard enrtries The chassis as an interface can also be included in the list and is represented by the key-word 'chassis' Valid interface examples: * - same as */*/*/* 5-6/* chassis 5/3-5/* 5/3/2-4 Invalid interface Eg: 5/*/3
OBJECT-TYPE    
  LongDisplayString SIZE(0..500)  

csOrionSystemLoginDomainRowStatus 1.3.6.1.4.1.3085.3.1.2.3.3.1.5
A row status type for the table entry.
OBJECT-TYPE    
  RowStatus  

csOrionSystemLoginPermTable 1.3.6.1.4.1.3085.3.1.2.3.4
Access permissions for a login user. A permission id represented as a :. A user can have multiple permissions.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionSystemLoginPermEntry

csOrionSystemLoginPermEntry 1.3.6.1.4.1.3085.3.1.2.3.4.1
An entry contains information for one login user permission.
OBJECT-TYPE    
  CsOrionSystemLoginPermEntry  

csOrionSystemLoginPermRowStatus 1.3.6.1.4.1.3085.3.1.2.3.4.1.1
A row status type for the table entry.
OBJECT-TYPE    
  RowStatus  

csOrionSystemLoginServer 1.3.6.1.4.1.3085.3.1.2.3.5
When this object is set to remote, a remote authentication server (csOrionSystemLoginServerListName) will be used to authenticate a user logging into a CLI session. When this object is set to localDatabase, the password file residing locally will be used to authenticate the CLI user.
OBJECT-TYPE    
  INTEGER remote(1), localDatabase(2)  

csOrionSystemLoginServerListName 1.3.6.1.4.1.3085.3.1.2.3.6
The name of the server list to use for remote authentication, if no list is specified then the server specified in the default server list is used. Cli authentication uses the server list and default servers configured on the system virtual router.
OBJECT-TYPE    
  DisplayString SIZE(1..80)  

csOrionModem 1.3.6.1.4.1.3085.3.1.2.4
OBJECT IDENTIFIER    

csOrionModemControl 1.3.6.1.4.1.3085.3.1.2.4.1
This object controls access to this device via Dial In modem.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOrionModemBaud 1.3.6.1.4.1.3085.3.1.2.4.2
This object sets the target baud rate of the modem connection.
OBJECT-TYPE    
  Integer32  

csOrionModemFlowCtl 1.3.6.1.4.1.3085.3.1.2.4.3
This object specifies the type of flow control used by the modem.
OBJECT-TYPE    
  INTEGER hardware(1), software(2)  

csOrionModemConnectWait 1.3.6.1.4.1.3085.3.1.2.4.4
This object sets the length of time, in seconds, the modem will wait for a connection.
OBJECT-TYPE    
  Integer32  

csOrionConfig 1.3.6.1.4.1.3085.3.1.2.5
OBJECT IDENTIFIER    

csOrionConfigSave 1.3.6.1.4.1.3085.3.1.2.5.1
OBJECT IDENTIFIER    

csOrionConfigSaveFileName 1.3.6.1.4.1.3085.3.1.2.5.1.1
This object is used when the save configuration is launched on an Orion box by setting the csOrionConfigSave object. The device handle the default value for this object. When this object is not set, the device look for the csOrionSystemBootConfig of the csOrionSystemBootTable. If that is not NULL, that name is used as the file name. Otherwise the default filename of config.dat is used.
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

csOrionConfigSaveStart 1.3.6.1.4.1.3085.3.1.2.5.1.2
This object triggers the configuration saving on the divice. The result of this action is stored in csOrionConfigSaveStatus.
OBJECT-TYPE    
  INTEGER save(1), none(2)  

csOrionConfigSaveStatus 1.3.6.1.4.1.3085.3.1.2.5.1.3
This object triggers the configuration saving on the divice. The result of this action is stored in csOrionConfigSaveStatus.
OBJECT-TYPE    
  INTEGER none(1), saveInProgress(2), saveSuccess(3), saveFailed(4)  

csOrionConfigLoad 1.3.6.1.4.1.3085.3.1.2.5.2
OBJECT IDENTIFIER    

csOrionConfigLoadOutputEnable 1.3.6.1.4.1.3085.3.1.2.5.2.1
This object controls whether output from loading configuration file should be printed out to the console. Loading configuration will be quicker if this object is disabled.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOrionFileSys 1.3.6.1.4.1.3085.3.1.2.6
OBJECT IDENTIFIER    

csOrionFileSysReqTable 1.3.6.1.4.1.3085.3.1.2.6.1
File System Request Table.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionFileSysReqEntry

csOrionFileSysReqEntry 1.3.6.1.4.1.3085.3.1.2.6.1.1
An entry of File System Request Table.
OBJECT-TYPE    
  CsOrionFileSysReqEntry  

csOrionFileSysReqIndex 1.3.6.1.4.1.3085.3.1.2.6.1.1.1
This object identifies a specific File System request entry. NMSs are expected to come up with a unique ID each request. This ID will also be used to index the File System result entry.
OBJECT-TYPE    
  Integer32 1..2147483647  

csOrionFileSysReqType 1.3.6.1.4.1.3085.3.1.2.6.1.1.2
This object specifies the filesystem operation stated in the enumeration above. We will add entries as we support additional filesystem commands. Objects that hold the parameters must also be set for commands that requires some arguments.
OBJECT-TYPE    
  INTEGER none(1), dir(2), delete(3), copy(4), rename(5), load(6)  

csOrionFileSysReqSrcFile 1.3.6.1.4.1.3085.3.1.2.6.1.1.3
This object is used to hold the source file for the file system operation. Must be set for 'delete', 'copy' and 'rename' requests. For 'load' request, the file to be loaded should be set using this object. If not set, the default file defined in csOrionSystemBootConfig will be loaded.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionFileSysReqDestFile 1.3.6.1.4.1.3085.3.1.2.6.1.1.4
This object is used to hold the source file for the file system operation. Must be set for copy and rename requests.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionFileSysReqStatus 1.3.6.1.4.1.3085.3.1.2.6.1.1.5
This object is used to store the status of the File System request. operation. For 'dir' operation, csOrionFileSysResultTable should only be evaluated after this object yields opSuccess(3).
OBJECT-TYPE    
  INTEGER none(1), opInProgress(2), opSuccess(3), opFailed(4)  

csOrionFileSysReqRowStatus 1.3.6.1.4.1.3085.3.1.2.6.1.1.6
The RowStatus object for this table. This is used to add/delete rows from this table.
OBJECT-TYPE    
  RowStatus  

csOrionFileSysResultTable 1.3.6.1.4.1.3085.3.1.2.6.2
File System Result Table. The object csOrionFileSysReqStatus should be evaluated before acquiring the results from this table.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionFileSysResultEntry

csOrionFileSysResultEntry 1.3.6.1.4.1.3085.3.1.2.6.2.1
An entry of File System Result Table. Each file returned from 'dir' request corresponds to an entry in csOrionFileSysResultEntry. Additional 'getnext' is expected to obtain the succeeding files. We will add objects in this table as we expose more file attributes.
OBJECT-TYPE    
  CsOrionFileSysResultEntry  

csOrionFileSysResultIndex 1.3.6.1.4.1.3085.3.1.2.6.2.1.1
This object identifies a specific File System result entry. This index corresponds to the ID provided by NMSs on File System request.
OBJECT-TYPE    
  Integer32 1..2147483647  

csOrionFileSysResultFilename 1.3.6.1.4.1.3085.3.1.2.6.2.1.2
This object is used to hold the filename from the 'dir' request.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionFileSysResultFilesize 1.3.6.1.4.1.3085.3.1.2.6.2.1.3
This object is used to hold the filesize from the 'dir' request.
OBJECT-TYPE    
  Integer32 0..2147483647  

csOrionChassisInfo 1.3.6.1.4.1.3085.3.1.2.7
OBJECT IDENTIFIER    

csOrionChassisMidplaneID 1.3.6.1.4.1.3085.3.1.2.7.1
Midplane laser ID for this chassis.
OBJECT-TYPE    
  OCTET STRING SIZE(7)  

csOrionChassisType 1.3.6.1.4.1.3085.3.1.2.7.2
Chassis type.
OBJECT-TYPE    
  INTEGER ipsx3500(1), ipsx9000(2), ipsx9500(3), unknown(4)  

csOrionChassisPacketRingStatus 1.3.6.1.4.1.3085.3.1.2.7.3
Status of the packet ring. noProtection means protection ring is inactive. onProtection means protection ring is active.
OBJECT-TYPE    
  INTEGER noProtection(1), onProtection(2)  

csOrionChassisPacketRingPrimToProtEndpoint 1.3.6.1.4.1.3085.3.1.2.7.4
Slot number of the primary to protection endpoint. If csOrionChassisPacketRingStatus is noProtection, this object will have a value of 0.
OBJECT-TYPE    
  Integer32 1..26  

csOrionChassisPacketRingProtToPrimEndpoint 1.3.6.1.4.1.3085.3.1.2.7.5
Slot number of the protection to primary endpoint. If csOrionChassisPacketRingStatus is noProtection, this object will have a value of 0.
OBJECT-TYPE    
  Integer32 1..26  

csOrionChassisPacketRingPrimaryCRC 1.3.6.1.4.1.3085.3.1.2.7.6
CRC count on the primary packet ring.
OBJECT-TYPE    
  Integer32  

csOrionChassisPacketRingProtectionCRC 1.3.6.1.4.1.3085.3.1.2.7.7
CRC count on the protection packet ring.
OBJECT-TYPE    
  Integer32  

csOrionPortInfo 1.3.6.1.4.1.3085.3.1.3
OBJECT IDENTIFIER    

csOrionEthInfo 1.3.6.1.4.1.3085.3.1.3.1
OBJECT IDENTIFIER    

csEthTable 1.3.6.1.4.1.3085.3.1.3.1.1
The Orion Ethernet Table.
OBJECT-TYPE    
  SEQUENCE OF  
    CsEthEntry

csEthEntry 1.3.6.1.4.1.3085.3.1.3.1.1.1
An entry in the Ethernet Table.
OBJECT-TYPE    
  CsEthEntry  

csEthSlotIndex 1.3.6.1.4.1.3085.3.1.3.1.1.1.1
This object identifies the slot in which the blade that supports this port is installed.
OBJECT-TYPE    
  Integer32 1..'7fffffff'h  

csEthModuleIndex 1.3.6.1.4.1.3085.3.1.3.1.1.1.2
This object identifies a specific module on the blade installed in csEthSlotIndex.
OBJECT-TYPE    
  Integer32 1..'7fffffff'h  

csEthPortIndex 1.3.6.1.4.1.3085.3.1.3.1.1.1.3
This object identifies a specific port on the module installed in csEthModuleIndex.
OBJECT-TYPE    
  Integer32 1..'7fffffff'h  

csEthEncapType 1.3.6.1.4.1.3085.3.1.3.1.1.1.4
This object identifies the encapsulation method used on this Ethernet port.
OBJECT-TYPE    
  INTEGER eth(1), ieee(2), snap(3)  

csEthAutoneg 1.3.6.1.4.1.3085.3.1.3.1.1.1.5
This object is used to enable or disable the autonegotiation feature of this Ethernet port. This feature is used to automatically negotiate the Speed and Duplex mode for 10/100 Mbps Ethernet ports.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

csEthDuplex 1.3.6.1.4.1.3085.3.1.3.1.1.1.6
This object is used to specify the Duplex mode of this Ethernet port. This is used only if csEthAutoneg is disabled. Note: The default value is removed because it is not fixed in the system after reboot when autonegotiation enabled. It is hardware configuration dependent.
OBJECT-TYPE    
  INTEGER half(1), full(2)  

csEthSpeed 1.3.6.1.4.1.3085.3.1.3.1.1.1.7
This object is used to specify the speed of this Ethernet port. This is used only if csEthAutoneg is disabled. Note: The default value is removed because it is not fixed in the system after reboot when autonegotiation enabled. It is hardware configuration dependent.
OBJECT-TYPE    
  INTEGER mbps10(1), mbps100(2), mbps1000(3)  

csEthLinkTestInterval 1.3.6.1.4.1.3085.3.1.3.1.1.1.8
This object is used to specify the interval, in seconds, between Link Test packet transmissions. If this object is set to 0, no Link Test packets are sent.
OBJECT-TYPE    
  Integer32 0..20  

csEthAdminStatus 1.3.6.1.4.1.3085.3.1.3.1.1.1.9
This object is used to enable/disable thie Ethernet port.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csEthOperStatus 1.3.6.1.4.1.3085.3.1.3.1.1.1.10
This object indicates the current operational status of this Ethernet port.
OBJECT-TYPE    
  OperStatus  

csEthPppoeService 1.3.6.1.4.1.3085.3.1.3.1.1.1.11
This object is used to enable or disable PPPoE service on Ethernet Ports.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csEthSubIfTable 1.3.6.1.4.1.3085.3.1.3.1.2
The Orion Ethernet Sub-Interface Table.
OBJECT-TYPE    
  SEQUENCE OF  
    CsEthSubIfEntry

csEthSubIfEntry 1.3.6.1.4.1.3085.3.1.3.1.2.1
The Parameters for a VLAN Interface.
OBJECT-TYPE    
  CsEthSubIfEntry  

csEthSubIfChannelIndex 1.3.6.1.4.1.3085.3.1.3.1.2.1.1
Channel ID of this VLAN connection. Currently, it will always be 0.
OBJECT-TYPE    
  Integer32 0..64  

csEthSubIfIndex 1.3.6.1.4.1.3085.3.1.3.1.2.1.2
The Sub Interface Id of the Logical Interface.
OBJECT-TYPE    
  Integer32 1..512  

csEthSubIfVlanId 1.3.6.1.4.1.3085.3.1.3.1.2.1.3
The unipue number between 0 and 4095 that identifies a particular VLAN. The range of VLAN IDs supported per port is from 2 to 4094. The null VLAN Id (0) indicates that the tag header contains only user priority information. The VLAN Id 1, 4095 is reserved for implementation use.
OBJECT-TYPE    
  Integer32 2..4094  

csEthSubIfUserPriority 1.3.6.1.4.1.3085.3.1.3.1.2.1.4
The user priority for this VLAN
OBJECT-TYPE    
  Integer32 0..7  

csEthSubIfVlanName 1.3.6.1.4.1.3085.3.1.3.1.2.1.5
The name for this VLAN
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

csEthSubIfAdmStatus 1.3.6.1.4.1.3085.3.1.3.1.2.1.6
This object is used to enable/disable this VLAN.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csEthSubIfOpStatus 1.3.6.1.4.1.3085.3.1.3.1.2.1.7
The operational status for this VLAN.
OBJECT-TYPE    
  OperStatus  

csEthSubIfRowStatus 1.3.6.1.4.1.3085.3.1.3.1.2.1.8
This object is used to create a new row or modify or destroy an existing row in the manner described in the definition of the RowStatus textual convention. Writable objects in the table may be written in any RowStatus state.
OBJECT-TYPE    
  RowStatus  

csEthSubifPppoeService 1.3.6.1.4.1.3085.3.1.3.1.2.1.9
This object is used to enable or disable PPPoE service on VLAN.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csEthStatsTable 1.3.6.1.4.1.3085.3.1.3.1.3
The Orion Ethernet Table.
OBJECT-TYPE    
  SEQUENCE OF  
    CsEthStatsEntry

csEthStatsEntry 1.3.6.1.4.1.3085.3.1.3.1.3.1
An entry in the Ethernet Statistic Table.
OBJECT-TYPE    
  CsEthStatsEntry  

csEthStatsTxDeferPktsOk 1.3.6.1.4.1.3085.3.1.3.1.3.1.1
The counter associated with the number of packets deferred upon the first transmit attempt due to a busy line .
OBJECT-TYPE    
  Counter64  

csEthStatsTxColCounts 1.3.6.1.4.1.3085.3.1.3.1.3.1.2
The counter associated with the number of Regular collisions during transmission.
OBJECT-TYPE    
  Counter64  

csEthStatsTxScolPktsOk 1.3.6.1.4.1.3085.3.1.3.1.3.1.3
The counter associated with the number of packets transmitted without any errors following a single collisions.
OBJECT-TYPE    
  Counter64  

csEthStatsTxMulticCollisionPktsOK 1.3.6.1.4.1.3085.3.1.3.1.3.1.4
The counter associated with the number of packets transmitted without any errors following multiple collisions.
OBJECT-TYPE    
  Counter64  

csEthStatsTx16CollisionCounts 1.3.6.1.4.1.3085.3.1.3.1.3.1.5
The counter associated with the number of packets that have experienced 16 consecutive collisions or more.
OBJECT-TYPE    
  Counter64  

csEthStatsTxLateCollisionCounts 1.3.6.1.4.1.3085.3.1.3.1.3.1.6
The counter associated with the number of transmission abortions due to a collision occurring after the transmission of packets that are 64 bytes in length.
OBJECT-TYPE    
  Counter64  

csEthStatsTx64Pkts 1.3.6.1.4.1.3085.3.1.3.1.3.1.7
The counter associated with the number of transmitted packets 64 bytes in length, including bad packets.
OBJECT-TYPE    
  Counter64  

csEthStatsTx65To127Pkts 1.3.6.1.4.1.3085.3.1.3.1.3.1.8
The counter associated with the number of packets 64 to 127 bytes in length, including bad packets.
OBJECT-TYPE    
  Counter64  

csEthStatsTx128To255Pkts 1.3.6.1.4.1.3085.3.1.3.1.3.1.9
The counter associated with the number of packets 128 to 255 bytes in length, including bad packets.
OBJECT-TYPE    
  Counter64  

csEthStatsTx256To511Pkts 1.3.6.1.4.1.3085.3.1.3.1.3.1.10
The counter associated with the number of packets 256 to 511 bytes in length, including bad packets.
OBJECT-TYPE    
  Counter64  

csEthStatsTx512To1023Pkts 1.3.6.1.4.1.3085.3.1.3.1.3.1.11
The counter associated with the number of transmitted packets 512 to 1023 bytes in length, including bad packets.
OBJECT-TYPE    
  Counter64  

csEthStatsTx1024To1518Pkts 1.3.6.1.4.1.3085.3.1.3.1.3.1.12
The counter associated with the number of transmitted packets 1024 to 1518 bytes in length, including bad packets.
OBJECT-TYPE    
  Counter64  

csEthStatsTx1519Pkts 1.3.6.1.4.1.3085.3.1.3.1.3.1.13
The counter associated with the number of transmitted packets with length larger than 1518 bytes, including bad packets.
OBJECT-TYPE    
  Counter64  

csEthStatsTxPausePktsOk 1.3.6.1.4.1.3085.3.1.3.1.3.1.14
The counter associated with the number of correct transmitted flow-control packets.
OBJECT-TYPE    
  Counter64  

csEthStatsTxErrCounts 1.3.6.1.4.1.3085.3.1.3.1.3.1.15
The counter associated with the number of packets transmitted with an error due to transmit FIFO underflow or txerr signal assertion.
OBJECT-TYPE    
  Counter64  

csEthStatsTxOctetsBad 1.3.6.1.4.1.3085.3.1.3.1.3.1.16
The counter associated with the number of bytes transmitted in packets with errors.
OBJECT-TYPE    
  Counter64  

csEthStatsRxRuntCounts 1.3.6.1.4.1.3085.3.1.3.1.3.1.17
The counter associated with the number of frames received without SFD detection but with carrier assertion .
OBJECT-TYPE    
  Counter64  

csEthStatsRxOvfCounts 1.3.6.1.4.1.3085.3.1.3.1.3.1.18
The counter associated with the number of received packets not fully accepted due to receive FIFO overflow .
OBJECT-TYPE    
  Counter64  

csEthStatsRxShortPktsOk 1.3.6.1.4.1.3085.3.1.3.1.3.1.19
The counter associated with the number of received packets without error, less than 64 bytes length .
OBJECT-TYPE    
  Counter64  

csEthStatsRxNormCrcCounts 1.3.6.1.4.1.3085.3.1.3.1.3.1.20
The counter associated with the number of packets received with an integral number of bytes and a CRC error with lengths between 64 bytes and maximum packet size .
OBJECT-TYPE    
  Counter64  

csEthStatsRxNormAliCounts 1.3.6.1.4.1.3085.3.1.3.1.3.1.21
The counter associated with the number of packets received with an nonintegral number of bytes and a CRC error with lengths between 64 bytes and maximum packet size.
OBJECT-TYPE    
  Counter64  

csEthStatsRxLongPktsCounts 1.3.6.1.4.1.3085.3.1.3.1.3.1.22
The counter associated with the number ofpackets larger than maximum packet size received without any error .
OBJECT-TYPE    
  Counter64  

csEthStatsRxLongCrcCounts 1.3.6.1.4.1.3085.3.1.3.1.3.1.23
The counter associated with the number of packets larger than maximum packet size received with a CRC error
OBJECT-TYPE    
  Counter64  

csEthStatsRx64Pkts 1.3.6.1.4.1.3085.3.1.3.1.3.1.24
The counter associated with the number of received packets 64 bytes in length, including bad packets.
OBJECT-TYPE    
  Counter64  

csEthStatsRx65To127Pkts 1.3.6.1.4.1.3085.3.1.3.1.3.1.25
The counter associated with the number of received packets 65 to 127 bytes in length, including bad packets.
OBJECT-TYPE    
  Counter64  

csEthStatsRx128To255Pkts 1.3.6.1.4.1.3085.3.1.3.1.3.1.26
The counter associated with the number of packets 128 to 255 bytes in length, including bad packetsO.
OBJECT-TYPE    
  Counter64  

csEthStatsRx256To511Pkts 1.3.6.1.4.1.3085.3.1.3.1.3.1.27
The counter associated with the number of packets 256 to 511 bytes in length, including bad packets
OBJECT-TYPE    
  Counter64  

csEthStatsRx512To1023Pkts 1.3.6.1.4.1.3085.3.1.3.1.3.1.28
The counter associated with the number of packets 512 to 1023 bytes in length, including bad packets.
OBJECT-TYPE    
  Counter64  

csEthStatsRx1024To1518Pkts 1.3.6.1.4.1.3085.3.1.3.1.3.1.29
The counter associated with the number of packets 1024 to 1518 bytes in length, including bad packets.
OBJECT-TYPE    
  Counter64  

csEthStatsRx1519Pkts 1.3.6.1.4.1.3085.3.1.3.1.3.1.30
The counter associated with the number of packets with length larger than 1518 bytes and the maximum packet size, including bad packets.
OBJECT-TYPE    
  Counter64  

csEthStatsRxPausePktsOk 1.3.6.1.4.1.3085.3.1.3.1.3.1.31
The counter associated with the number of correct received flow-control packets.
OBJECT-TYPE    
  Counter64  

csEthStatsRxFalsCrcCounts 1.3.6.1.4.1.3085.3.1.3.1.3.1.32
The counter associated with the number of false carrier events detected
OBJECT-TYPE    
  Counter64  

csEthStatsRxOctsBad 1.3.6.1.4.1.3085.3.1.3.1.3.1.33
The counter associated with the number of bytes received in packets with errors.
OBJECT-TYPE    
  Counter64  

csEthStatsRxSysErrCounts 1.3.6.1.4.1.3085.3.1.3.1.3.1.34
The counter associated with the number of received packets during which PHY symbol errors were detected.
OBJECT-TYPE    
  Counter64  

csEthStatsTx1024Pkts 1.3.6.1.4.1.3085.3.1.3.1.3.1.35
The counter associated with the number of transmitted packets 1024 bytes or more in length, including bad packets. It's only for Giga bit Ethernet card.
OBJECT-TYPE    
  Counter64  

csEthStatsRx1024Pkts 1.3.6.1.4.1.3085.3.1.3.1.3.1.36
The counter associated with the number of packets 1024 bytes or more in length, including bad packets. It's only for Giga bit Ethernet card.
OBJECT-TYPE    
  Counter64  

csOrionDs3Info 1.3.6.1.4.1.3085.3.1.3.2
OBJECT IDENTIFIER    

csDs3ConfigTable 1.3.6.1.4.1.3085.3.1.3.2.1
The DS3 configuration table.
OBJECT-TYPE    
  SEQUENCE OF  
    CsDs3ConfigEntry

csDs3ConfigEntry 1.3.6.1.4.1.3085.3.1.3.2.1.1
An entry in the DS3 Configuration table.
OBJECT-TYPE    
  CsDs3ConfigEntry  

csDs3ConfigSlotIndex 1.3.6.1.4.1.3085.3.1.3.2.1.1.1
This object identifies the blade to which this Ds3 Port is attached. Together with csDs3ConfigModuleIndex, csDs3ConfigPortIndex, it uniquely identifies a physical port.
OBJECT-TYPE    
  Integer32 1..'7fffffff'h  

csDs3ConfigModuleIndex 1.3.6.1.4.1.3085.3.1.3.2.1.1.2
This object identifies the type of of the Ds3 Module on the blade identified by csChDs3SlotIndex.
OBJECT-TYPE    
  Integer32 1..'7fffffff'h  

csDs3ConfigPortIndex 1.3.6.1.4.1.3085.3.1.3.2.1.1.3
This object identifies the location of the Ds3 Port on the module identified by csChDs3ModuleIndex. Together with csDs3ConfigSlotIndex, csDs3ConfigModuleIndex, it uniquely identifies a physical port.
OBJECT-TYPE    
  Integer32 1..'7fffffff'h  

csDs3ConfigCableLength 1.3.6.1.4.1.3085.3.1.3.2.1.1.4
The length of the DS3 cable. NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  Integer32 0..450  

csDs3ConfigFraming 1.3.6.1.4.1.3085.3.1.3.2.1.1.5
The framing format used on this Ds3 Interface. The default value is cbit if the interface is DS3. If the interface is E3, e3Framed will be used, and cannot be configured to any other types.
OBJECT-TYPE    
  INTEGER cbit(1), m23(2), auto(3), e3Framed(4)  

csDs3ConfigMdlPath 1.3.6.1.4.1.3085.3.1.3.2.1.1.6
This object controls the transmission of the MDL Path message. NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csDs3ConfigMdlIdleSig 1.3.6.1.4.1.3085.3.1.3.2.1.1.7
This object controls the transmission of the MDL Idle Signal message. NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csDs3ConfigMdlTestSig 1.3.6.1.4.1.3085.3.1.3.2.1.1.8
This object controls the transmission of the MDL Test Signal message. NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csDs3ConfigMdlEic 1.3.6.1.4.1.3085.3.1.3.2.1.1.9
This object specifies the Equipment Identification Code. NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  DisplayString SIZE(0..10)  

csDs3ConfigMdlLic 1.3.6.1.4.1.3085.3.1.3.2.1.1.10
This object specifies the Location Identification Code. NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  DisplayString SIZE(0..11)  

csDs3ConfigMdlFic 1.3.6.1.4.1.3085.3.1.3.2.1.1.11
This object specifies the Frame Identification Code. NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  DisplayString SIZE(0..10)  

csDs3ConfigMdlUnit 1.3.6.1.4.1.3085.3.1.3.2.1.1.12
This object specifies the Unit Identification Code. NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  DisplayString SIZE(0..6)  

csDs3ConfigMdlPfi 1.3.6.1.4.1.3085.3.1.3.2.1.1.13
This object specifies the Facility Identification Code sent in the MDL Path message. NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  DisplayString SIZE(0..38)  

csDs3ConfigMdlPort 1.3.6.1.4.1.3085.3.1.3.2.1.1.14
This object specifies the Port number string sent in the MDL Idle Signal message. NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  DisplayString SIZE(0..38)  

csDs3ConfigMdlGenerator 1.3.6.1.4.1.3085.3.1.3.2.1.1.15
This object specifies the Generator number string sent in the MDL Test Signal message. NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  DisplayString SIZE(0..38)  

csDs3ConfigTestT1Id 1.3.6.1.4.1.3085.3.1.3.2.1.1.16
This object identifies which of the 28 T1's within this DS3 are to be broken out into the Test T1 port. If none of the T1's are to be broken out, this object should be set to 0. NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  Integer32 1..28  

csDs3ConfigAdminStatus 1.3.6.1.4.1.3085.3.1.3.2.1.1.17
This object is used to enable/disable this Ds3 port.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csDs3ConfigOperStatus 1.3.6.1.4.1.3085.3.1.3.2.1.1.18
This object indicates the current operational status of this Ds3 port.
OBJECT-TYPE    
  OperStatus  

csDs3ConfigClockSource 1.3.6.1.4.1.3085.3.1.3.2.1.1.19
This object specifies the source of the Transmit Clock used on this (unchannelized) DS3. If this object is set to internal(1), a local clock source is used. If this object is set to line(2), the recovered received clock is used as the transmit clock. NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  INTEGER internal(1), line(2)  

csDs3ConfigDeviceType 1.3.6.1.4.1.3085.3.1.3.2.1.1.20
This object indicates whether the interface is DS3 or E3.
OBJECT-TYPE    
  INTEGER ds3(1), e3(2)  

csDs3ConfigSendCode 1.3.6.1.4.1.3085.3.1.3.2.1.1.21
This variable indicates what type of code is being sent across the DS3 interface by the device. Setting this variable causes the interface to begin sending the code requested. The values mean: sendNoCode sending looped or normal data sendLineCode sending a request for a line loopback sendPayloadCode sending a request for a payload loopback (i.e., all DS1/E1s in a DS3/E3 frame) sendResetCode sending a loopback deactivation request NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  INTEGER ds3SendNoCode(1), ds3SendLineCode(2), ds3SendPayloadCode(3), ds3SendResetCode(4)  

csDs3ConfigLoopbackType 1.3.6.1.4.1.3085.3.1.3.2.1.1.22
This object represents the desired loopback configuration of the DS3 interface. The values mean: noLoop Not in the loopback state. A device that is not capable of performing a loopback on the interface shall always return this as its value. It is the default value. payloadLoop The received signal at this interface is looped through the device. Typically the received signal is looped back for retransmission after it has passed through the device's framing function. lineLoop The received signal at this interface does not go through the device (minimum penetration) but is looped back out. otherLoop Loopbacks that are not defined here. Currently not used in the IPSX system. inwardLoop The sent signal at this interface is looped back through the device. dualLoop Both lineLoop and inwardLoop will be active simultaneously.
OBJECT-TYPE    
  INTEGER noLoop(1), payloadLoop(2), lineLoop(3), otherLoop(4), inwardLoop(5), dualLoop(6)  

csDs3ConfigLoopbackStatus 1.3.6.1.4.1.3085.3.1.3.2.1.1.23
This variable represents the current state of the loopback on the DS3 interface. It contains information about loopbacks established by a manager and remotely from the far end. The csDs3ConfigLoopbackStatus is a bit map represented as a sum, therefore is can represent multiple loopbacks simultaneously. The various bit positions are: 1 ds3NoLoopback 2 ds3NearEndPayloadLoopback 4 ds3NearEndLineLoopback 8 ds3NearEndOtherLoopback 16 ds3NearEndInwardLoopback 32 ds3FarEndPayloadLoopback 64 ds3FarEndLineLoopback
OBJECT-TYPE    
  INTEGER 1..127  

csDs3ConfigLineStatus 1.3.6.1.4.1.3085.3.1.3.2.1.1.24
This variable indicates the Line Status of the interface. It contains loopback state information and failure state information. The csDs3ConfigLineStatus is a bit map represented as a sum, therefore, it can represent multiple failures and a loopback (see csDs3ConfigLoopbackStatus object for the type of loopback) simultaneously. The ds3NoAlarm must be set if and only if no other flag is set. If the ds3LoopbackState bit is set, the loopback in effect can be determined from the csDs3ConfigLoopbackStatus object. The various bit positions are: 0 ds3NoAlarm No alarm present 1 ds3RcvRAIFailure Receiving Yellow/Remote Alarm Indication 2 ds3XmitRAIAlarm Transmitting Yellow/Remote Alarm Indication 3 ds3RcvAIS Receiving AIS failure state 4 ds3XmitAIS Transmitting AIS 5 ds3LOF Receiving LOF failure state 6 ds3LOS Receiving LOS failure state 7 ds3LoopbackState Looping the received signal 8 ds3RcvTestCode Receiving a Test Pattern 9 ds3OtherFailure any line status not defined here 10 ds3UnavailSigState Near End in Unavailable Signal State 11 ds3NetEquipOOS Carrier Equipment Out of Service
OBJECT-TYPE    
  INTEGER 1..4095  

csDs3ConfigTimeElapsed 1.3.6.1.4.1.3085.3.1.3.2.1.1.25
The number of seconds that have elapsed since the beginning of the near end current error-measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.
OBJECT-TYPE    
  INTEGER 0..899  

csDs3ConfigValidInterval 1.3.6.1.4.1.3085.3.1.3.2.1.1.26
The number of previous near end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15 minute near end intervals since the interface has been online. In the case where the agent is a proxy, it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.
OBJECT-TYPE    
  INTEGER 1..96  

csDs3ConfigInvalidInterval 1.3.6.1.4.1.3085.3.1.3.2.1.1.27
The number of intervals in the range from 0 to csDs3ConfigValidInterval for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).
OBJECT-TYPE    
  INTEGER 1..96  

csDs3ConfigLineCoding 1.3.6.1.4.1.3085.3.1.3.2.1.1.28
This variable describes the variety of Zero Code Suppression used on this interface, which in turn affects a number of its characteristics. ds3B3ZS and e3HDB3 refer to the use of specified patterns of normal bits and bipolar violations which are used to replace sequences of zero bits of a specified length. NOTE: This is applicable only for E3 for now.
OBJECT-TYPE    
  INTEGER ds3Other(1), ds3B3ZS(2), e3HDB3(3), e3NRZ(4)  

csDs3ConfigNationalBit 1.3.6.1.4.1.3085.3.1.3.2.1.1.29
Bit 12 of the E3 G.751 frame. NOTE: This is applicable only for E3.
OBJECT-TYPE    
  INTEGER 0..1  

csDs3Ds1ConfigTable 1.3.6.1.4.1.3085.3.1.3.2.2
The DS3 DS1 configuration table. This is used to configure each of the DS1 connections within a complete DS3.
OBJECT-TYPE    
  SEQUENCE OF  
    CsDs3Ds1ConfigEntry

csDs3Ds1ConfigEntry 1.3.6.1.4.1.3085.3.1.3.2.2.1
An entry in the DS3 DS1 Configuration table.
OBJECT-TYPE    
  CsDs3Ds1ConfigEntry  

csDs3Ds1Id 1.3.6.1.4.1.3085.3.1.3.2.2.1.1
This identifies a single DS1 within a complete DS3.
OBJECT-TYPE    
  Integer32 1..28  

csDs3Ds1Framing 1.3.6.1.4.1.3085.3.1.3.2.2.1.2
This object specifies the framing used on the DS1 assigned to this channel.
OBJECT-TYPE    
  INTEGER esf(1), sf(2), e1CrcMultiframe(3), e1CrcMultiframeFebe(4), e1FrameAlignSignal(5), e1UnFramed(6)  

csDs3Ds1YellowAlarmDetect 1.3.6.1.4.1.3085.3.1.3.2.2.1.3
This object specifies whether Yellow Alarm detection is active on the DS1 assigned to this channel.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csDs3Ds1YellowAlarmGen 1.3.6.1.4.1.3085.3.1.3.2.2.1.4
This object specifies whether Yellow Alarm generation is active on the DS1 assigned to this channel. NOTE: This is applicable only for T1.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csDs3Ds1LineCode 1.3.6.1.4.1.3085.3.1.3.2.2.1.5
This object specifies the variety of Zero Code Suppression used on the on the DS1 assigned to this channel. NOTE: This is applicable only for T1.
OBJECT-TYPE    
  INTEGER ami(1), b8zs(2)  

csDs3Ds1InvertData 1.3.6.1.4.1.3085.3.1.3.2.2.1.6
This object specifies whether the 'invert data' feature is enabled on the DS1 assigned to this channel. This feature must be enabled if the Line Code parameter (csDs3Ds1LineCode) is set to ami. NOTE: This is applicable only for T1.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

csDs3Ds1ClockSource 1.3.6.1.4.1.3085.3.1.3.2.2.1.7
This object specifies the source of the Transmit Clock used on the DS1 assigned to this channel. If this object is set to internal(1), a local clock source is used. If this object is set to line(2), the recovered received clock is used as the transmit clock. NOTE: This is applicable only for T1.
OBJECT-TYPE    
  INTEGER internal(1), line(2)  

csDs3Ds1Fdl 1.3.6.1.4.1.3085.3.1.3.2.2.1.8
This is used to enable/disable 1 second transmission of performance reports via ANSI 403 FDL. If this is disabled, the AT&T 54016 version of FDL is used. Note, FDL is available only for ESF framing. And so it is only applicable for T1.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csDs3Ds1OperStatus 1.3.6.1.4.1.3085.3.1.3.2.2.1.9
This object indicates the current operational status of this DS1.
OBJECT-TYPE    
  OperStatus  

csDs3Ds1SendCode 1.3.6.1.4.1.3085.3.1.3.2.2.1.10
This variable indicates what type of code is being sent across the DS1 interface by the device. Setting this variable causes the interface to send the code requested. NOTE: This is applicable only for T1.. The values mean: ds1SendNoCode sending looped or normal data ds1SendLineCode sending a request for a line loopback ds1SendPayloadCode sending a request for a payload loopback ds1SendResetCode sending a loopback termination request
OBJECT-TYPE    
  INTEGER ds1SendNoCode(1), ds1SendLineCode(2), ds1SendPayloadCode(3), ds1SendResetCode(4)  

csDs3Ds1LoopbackType 1.3.6.1.4.1.3085.3.1.3.2.2.1.11
This object represents the desired loopback configuration of the DS1 interface. This variable will be interpreted only when csDs3Ds1LoopbackDestination is set to a valid value. NOTE: This is applicable only for T1. noLoop Not in the loopback state. A device that is not capable of performing a loopback on the interface shall always return this as its value. payloadLoop The received signal at this interface is looped through the device. Typically the received signal is looped back for retransmission after it has passed through the device's framing function. lineLoop The received signal at this interface does not go through the device (minimum penetration) but is looped back out. otherLoop Loopbacks that are not defined here. Currently not used in the IPSX system inwardLoop The transmitted signal at this interface is looped back and received by the same interface. What is transmitted onto the line is product dependent. Cannot be applied to far end. dualLoop Both dsx1LineLoop and dsx1InwardLoop will be active simultaneously. Cannot be applied to far end.
OBJECT-TYPE    
  INTEGER noLoop(1), payloadLoop(2), lineLoop(3), otherLoop(4), inwardLoop(5), dualLoop(6)  

csDs3Ds1LoopbackStatus 1.3.6.1.4.1.3085.3.1.3.2.2.1.12
This variable represents the current state of the loopback on the DS1 interface. It contains information about loopbacks established by a manager and remotely from the far end. NOTE: This is applicable only for T1. The csDs3Ds1LoopbackStatus is a bit map represented as a sum, therefore is can represent multiple loopbacks simultaneously. The various bit positions are: 1 ds1NoLoopback 2 ds1NearEndPayloadLoopback 4 ds1NearEndLineLoopback 8 ds1NearEndOtherLoopback 16 ds1NearEndInwardLoopback 32 ds1FarEndPayloadLoopback 64 ds1FarEndLineLoopback
OBJECT-TYPE    
  INTEGER 1..127  

csDs3Ds1LineConfig 1.3.6.1.4.1.3085.3.1.3.2.2.1.13
This variable represents DS1/E1 transmit line configuration. This is normally used for dignostic or service purpose, it is not supposed for user to configure. The various bit positions are: BIT(0) not used BIT(1) ds1NoAlarm BIT(2) ds1RcvFarEndLOF BIT(3) ds1XmtFarEndLOF BIT(4) ds1RcvAIS BIT(5) ds1XmtAIS BIT(6) ds1LossOfFrame BIT(7) ds1LossOfSignal BIT(8) ds1LoopbackState BIT(9) ds1T16AIS BIT(10) ds1RcvFarEndLOMF BIT(11) ds1XmtFarEndLOMF BIT(12) ds1RcvTestCode BIT(13) ds1OtherFailure BIT(14) ds1UnavailSigState BIT(15) ds1NetEquipOOS BIT(16) ds1RcvPayloadAIS BIT(17) ds1Ds2PerfThreshold BIT(18) ds1XmtTrnkCond
OBJECT-TYPE    
  Integer32  

csDs3Ds1LineStatus 1.3.6.1.4.1.3085.3.1.3.2.2.1.14
This variable represents DS1/E1 transmit and receive line status. The various bit positions are: BIT(0) not used BIT(1) ds1NoAlarm BIT(2) ds1RcvFarEndLOF BIT(3) ds1XmtFarEndLOF BIT(4) ds1RcvAIS BIT(5) ds1XmtAIS BIT(6) ds1LossOfFrame BIT(7) ds1LossOfSignal BIT(8) ds1LoopbackState BIT(9) ds1T16AIS BIT(10) ds1RcvFarEndLOMF BIT(11) ds1XmtFarEndLOMF BIT(12) ds1RcvTestCode BIT(13) ds1OtherFailure BIT(14) ds1UnavailSigState BIT(15) ds1NetEquipOOS BIT(16) ds1RcvPayloadAIS BIT(17) ds1Ds2PerfThreshold BIT(18) ds1XmtTrnkCond
OBJECT-TYPE    
  Integer32  

csDs3E1IntBits 1.3.6.1.4.1.3085.3.1.3.2.2.1.15
This variable is used to configure the 2-bits international bits for the E1 interface. NOTE: This is applicable only for E1.
OBJECT-TYPE    
  INTEGER 0..3  

csDs3E1NatBits 1.3.6.1.4.1.3085.3.1.3.2.2.1.16
This 4-bit object is added for the E1 sub-multiframe aligned national bit codeword configuration. NOTE: This is applicable only for E1.
OBJECT-TYPE    
  INTEGER 0..31  

csChDs3Table 1.3.6.1.4.1.3085.3.1.3.2.3
The Channelized DS3 Channel configuration table.
OBJECT-TYPE    
  SEQUENCE OF  
    CsChDs3Entry

csChDs3Entry 1.3.6.1.4.1.3085.3.1.3.2.3.1
An entry in the DS3 Fractional table.
OBJECT-TYPE    
  CsChDs3Entry  

csChDs3SlotIndex 1.3.6.1.4.1.3085.3.1.3.2.3.1.1
This object identifies the blade to which this Ds3 Port is attached. Together with csChDs3ModuleIndex, csChDs3PortIndex, it uniquely identifies a physical port.
OBJECT-TYPE    
  Integer32 1..126  

csChDs3ModuleIndex 1.3.6.1.4.1.3085.3.1.3.2.3.1.2
This object identifies the module of the Ds3 Blade
OBJECT-TYPE    
  Integer32 1..126  

csChDs3PortIndex 1.3.6.1.4.1.3085.3.1.3.2.3.1.3
This object identifies the location of the Ds3 Port on the blade identified by csChDs3SlotIndex. Together with csChDs3SlotIndex, it uniquely identifies a physical port.
OBJECT-TYPE    
  Integer32 1..126  

csChDs3ChNumber 1.3.6.1.4.1.3085.3.1.3.2.3.1.4
The channel number for this entry.
OBJECT-TYPE    
  Integer32 1..128  

csChDs3T1Number 1.3.6.1.4.1.3085.3.1.3.2.3.1.5
This object identifies the DS1 number that is assigned to this channel. This number for E1 is 1 to 16. NOTE: This object can only be set during row creation. Once the row is created, this object cannot be modified.
OBJECT-TYPE    
  Integer32 1..28  

csChDs3TimeSlots 1.3.6.1.4.1.3085.3.1.3.2.3.1.6
This object specifies the individual DS0 time slots within the DS1(T1 or E1, identified by csChDs3T1Number) that are assigned to this channel. The format can be a range of slots (1-8), a list of slots (1, 3, 7), or a mix of both. NOTE: This object can only be set during row creation. Once the row is created, this object cannot be modified.
OBJECT-TYPE    
  DisplayString SIZE(1..40)  

csChDs3Speed 1.3.6.1.4.1.3085.3.1.3.2.3.1.7
This object specifies the speed (and, hence the signaling mode) of the DS1 assigned to this channel.
OBJECT-TYPE    
  INTEGER kbps64(1), kbps56(2)  

csChDs3Encap 1.3.6.1.4.1.3085.3.1.3.2.3.1.8
This object specifies the encapsulation used on this DS3 channel. If the encapsulation type is frameRelay(2), use the csFrameRelayTable to configure the Frame Relay specific parameters.
OBJECT-TYPE    
  INTEGER none(0), ppp(1), frameRelay(2), ciscoHdlc(3)  

csChDs3RowStatus 1.3.6.1.4.1.3085.3.1.3.2.3.1.9
A row status type for this Channel.
OBJECT-TYPE    
  RowStatus  

csChDs3OperStatus 1.3.6.1.4.1.3085.3.1.3.2.3.1.10
A operational status for this Channel.
OBJECT-TYPE    
  OperStatus  

csDs3StatCurrentTable 1.3.6.1.4.1.3085.3.1.3.2.4
The DS3/E3 current table contains various statistics being collected for the current 15 minute interval.
OBJECT-TYPE    
  SEQUENCE OF  
    CsDs3StatCurrentEntry

csDs3StatCurrentEntry 1.3.6.1.4.1.3085.3.1.3.2.4.1
An entry in the DS3/E3 Current table.
OBJECT-TYPE    
  CsDs3StatCurrentEntry  

csDs3StatCurrentPESs 1.3.6.1.4.1.3085.3.1.3.2.4.1.1
The counter associated with the number of P-bit Errored Seconds. NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  PerfCurrentCount  

csDs3StatCurrentPSESs 1.3.6.1.4.1.3085.3.1.3.2.4.1.2
The counter associated with the number of P-bit Severely Errored Seconds. NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  PerfCurrentCount  

csDs3StatCurrentSEFSs 1.3.6.1.4.1.3085.3.1.3.2.4.1.3
The counter associated with the number of Severely Errored Framing Seconds. NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  PerfCurrentCount  

csDs3StatCurrentUASs 1.3.6.1.4.1.3085.3.1.3.2.4.1.4
The counter associated with the number of Unavailable Seconds. NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  PerfCurrentCount  

csDs3StatCurrentLCVs 1.3.6.1.4.1.3085.3.1.3.2.4.1.5
The counter associated with the number of Line Coding Violations. NOTE: This is applicable for both E3 and DS3.
OBJECT-TYPE    
  PerfCurrentCount  

csDs3StatCurrentPCVs 1.3.6.1.4.1.3085.3.1.3.2.4.1.6
The counter associated with the number of P-bit Coding Violations. NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  PerfCurrentCount  

csDs3StatCurrentLESs 1.3.6.1.4.1.3085.3.1.3.2.4.1.7
The number of Line Errored Seconds. NOTE: This is applicable for both E3 and DS3.
OBJECT-TYPE    
  PerfCurrentCount  

csDs3StatCurrentCCVs 1.3.6.1.4.1.3085.3.1.3.2.4.1.8
The number of C-bit Coding Violations. NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  PerfCurrentCount  

csDs3StatCurrentCESs 1.3.6.1.4.1.3085.3.1.3.2.4.1.9
The number of C-bit Errored Seconds. NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  PerfCurrentCount  

csDs3StatCurrentCSESs 1.3.6.1.4.1.3085.3.1.3.2.4.1.10
The number of C-bit Severely Errored Seconds. NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  PerfCurrentCount  

csDs3StatCurrentLSESs 1.3.6.1.4.1.3085.3.1.3.2.4.1.11
The number of Line Severely Errored Seconds. NOTE: This is applicable for both E3 and DS3.
OBJECT-TYPE    
  PerfCurrentCount  

csDs3StatIntervalTable 1.3.6.1.4.1.3085.3.1.3.2.5
The DS3/E3 Interval Table contains various statistics collected by each DS3/E3 Interface over the previous 24 hours of operation. The past 24 hours are broken into 96 completed 15 minute intervals. Each row in this table represents one such interval (identified by csDs3StatIntervalNumber) and for one specific DS3 port (identifed by csDs3ConfigPortIndex).
OBJECT-TYPE    
  SEQUENCE OF  
    CsDs3StatIntervalEntry

csDs3StatIntervalEntry 1.3.6.1.4.1.3085.3.1.3.2.5.1
An entry in the DS3/E3 Interval table.
OBJECT-TYPE    
  CsDs3StatIntervalEntry  

csDs3StatIntervalNumber 1.3.6.1.4.1.3085.3.1.3.2.5.1.1
A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 1.
OBJECT-TYPE    
  INTEGER 1..96  

csDs3StatIntervalPESs 1.3.6.1.4.1.3085.3.1.3.2.5.1.2
The counter associated with the number of P-bit Errored Seconds. NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  PerfIntervalCount  

csDs3StatIntervalPSESs 1.3.6.1.4.1.3085.3.1.3.2.5.1.3
The counter associated with the number of P-bit Severely Errored Seconds. NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  PerfIntervalCount  

csDs3StatIntervalSEFSs 1.3.6.1.4.1.3085.3.1.3.2.5.1.4
The counter associated with the number of Severely Errored Framing Seconds. NOTE: This is applicable for both DS3 and E3.
OBJECT-TYPE    
  PerfIntervalCount  

csDs3StatIntervalUASs 1.3.6.1.4.1.3085.3.1.3.2.5.1.5
The counter associated with the number of Unavailable Seconds. This object may decrease if the occurance of unavailable seconds occurs across an inteval boundary. NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  PerfIntervalCount  

csDs3StatIntervalLCVs 1.3.6.1.4.1.3085.3.1.3.2.5.1.6
The counter associated with the number of Line Coding Violations. NOTE: This is applicable for both E3 and DS3.
OBJECT-TYPE    
  PerfIntervalCount  

csDs3StatIntervalPCVs 1.3.6.1.4.1.3085.3.1.3.2.5.1.7
The counter associated with the number of P-bit Coding Violations. NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  PerfIntervalCount  

csDs3StatIntervalLESs 1.3.6.1.4.1.3085.3.1.3.2.5.1.8
The number of Line Errored Seconds (BPVs or illegal zero sequences). NOTE: This is applicable for both E3 and DS3.
OBJECT-TYPE    
  PerfIntervalCount  

csDs3StatIntervalCCVs 1.3.6.1.4.1.3085.3.1.3.2.5.1.9
The number of C-bit Coding Violations. NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  PerfIntervalCount  

csDs3StatIntervalCESs 1.3.6.1.4.1.3085.3.1.3.2.5.1.10
The number of C-bit Errored Seconds. NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  PerfIntervalCount  

csDs3StatIntervalCSESs 1.3.6.1.4.1.3085.3.1.3.2.5.1.11
The number of C-bit Severely Errored Seconds. NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  PerfIntervalCount  

csDs3StatIntervalLSESs 1.3.6.1.4.1.3085.3.1.3.2.5.1.12
The number of Line Severely Errored Seconds. NOTE: This is applicable for both E3 and DS3.
OBJECT-TYPE    
  PerfIntervalCount  

csDs3StatIntervalValidData 1.3.6.1.4.1.3085.3.1.3.2.5.1.13
This variable indicates if the data for this interval is valid.
OBJECT-TYPE    
  TruthValue  

csDs3StatTotalTable 1.3.6.1.4.1.3085.3.1.3.2.6
The DS3/E3 Total Table contains the cumulative sum of the various statistics for the 24 hour period preceding the current interval.
OBJECT-TYPE    
  SEQUENCE OF  
    CsDs3StatTotalEntry

csDs3StatTotalEntry 1.3.6.1.4.1.3085.3.1.3.2.6.1
An entry in the DS3/E3 Total table.
OBJECT-TYPE    
  CsDs3StatTotalEntry  

csDs3StatTotalPESs 1.3.6.1.4.1.3085.3.1.3.2.6.1.1
The counter associated with the number of P-bit Errored Seconds, encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  PerfTotalCount  

csDs3StatTotalPSESs 1.3.6.1.4.1.3085.3.1.3.2.6.1.2
The counter associated with the number of P-bit Severely Errored Seconds, encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  PerfTotalCount  

csDs3StatTotalSEFSs 1.3.6.1.4.1.3085.3.1.3.2.6.1.3
The counter associated with the number of Severely Errored Framing Seconds, encountered by a DS3/E3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  PerfTotalCount  

csDs3StatTotalUASs 1.3.6.1.4.1.3085.3.1.3.2.6.1.4
The counter associated with the number of Unavailable Seconds, encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  PerfTotalCount  

csDs3StatTotalLCVs 1.3.6.1.4.1.3085.3.1.3.2.6.1.5
The counter associated with the number of Line Coding Violations encountered by a DS3/E3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. NOTE: This is applicable for both E3 and DS3.
OBJECT-TYPE    
  PerfTotalCount  

csDs3StatTotalPCVs 1.3.6.1.4.1.3085.3.1.3.2.6.1.6
The counter associated with the number of P-bit Coding Violations, encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  PerfTotalCount  

csDs3StatTotalLESs 1.3.6.1.4.1.3085.3.1.3.2.6.1.7
The number of Line Errored Seconds (BPVs or illegal zero sequences) encountered by a DS3/E3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. NOTE: This is applicable for both E3 and DS3.
OBJECT-TYPE    
  PerfTotalCount  

csDs3StatTotalCCVs 1.3.6.1.4.1.3085.3.1.3.2.6.1.8
The number of C-bit Coding Violations encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  PerfTotalCount  

csDs3StatTotalCESs 1.3.6.1.4.1.3085.3.1.3.2.6.1.9
The number of C-bit Errored Seconds encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  PerfTotalCount  

csDs3StatTotalCSESs 1.3.6.1.4.1.3085.3.1.3.2.6.1.10
The number of C-bit Severely Errored Seconds encountered by a DS3 interface in the previous 24-hour interval. Invalid 15 minute intervals count as 0. NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  PerfTotalCount  

csDs3StatTotalLSESs 1.3.6.1.4.1.3085.3.1.3.2.6.1.11
The number of Line Severely Errored Seconds encountered by a DS3 interface in the previous 24-hour interval. Invalid 15 minute intervals count as 0. NOTE: This is applicable for both E3 and DS3.
OBJECT-TYPE    
  PerfTotalCount  

csDs3Ds1CurrentTable 1.3.6.1.4.1.3085.3.1.3.2.7
The DS1 current table contains various statistics being collected for the current 15 minute interval.
OBJECT-TYPE    
  SEQUENCE OF  
    CsDs3Ds1CurrentEntry

csDs3Ds1CurrentEntry 1.3.6.1.4.1.3085.3.1.3.2.7.1
An entry in the DS1 Current table.
OBJECT-TYPE    
  CsDs3Ds1CurrentEntry  

csDs3Ds1CurrentESs 1.3.6.1.4.1.3085.3.1.3.2.7.1.1
The number of Errored Seconds.
OBJECT-TYPE    
  PerfCurrentCount  

csDs3Ds1CurrentSESs 1.3.6.1.4.1.3085.3.1.3.2.7.1.2
The number of Severely Errored Seconds.
OBJECT-TYPE    
  PerfCurrentCount  

csDs3Ds1CurrentSEFSs 1.3.6.1.4.1.3085.3.1.3.2.7.1.3
The number of Severely Errored Framing Seconds.
OBJECT-TYPE    
  PerfCurrentCount  

csDs3Ds1CurrentUASs 1.3.6.1.4.1.3085.3.1.3.2.7.1.4
The number of Unavailable Seconds.
OBJECT-TYPE    
  PerfCurrentCount  

csDs3Ds1CurrentCSSs 1.3.6.1.4.1.3085.3.1.3.2.7.1.5
The number of Controlled Slip Seconds.
OBJECT-TYPE    
  PerfCurrentCount  

csDs3Ds1CurrentPCVs 1.3.6.1.4.1.3085.3.1.3.2.7.1.6
The number of Path Coding Violations.
OBJECT-TYPE    
  PerfCurrentCount  

csDs3Ds1CurrentLESs 1.3.6.1.4.1.3085.3.1.3.2.7.1.7
The number of Line Errored Seconds.
OBJECT-TYPE    
  PerfCurrentCount  

csDs3Ds1CurrentBESs 1.3.6.1.4.1.3085.3.1.3.2.7.1.8
The number of Bursty Errored Seconds.
OBJECT-TYPE    
  PerfCurrentCount  

csDs3Ds1CurrentDMs 1.3.6.1.4.1.3085.3.1.3.2.7.1.9
The number of Degraded Minutes.
OBJECT-TYPE    
  PerfCurrentCount  

csDs3Ds1CurrentLCVs 1.3.6.1.4.1.3085.3.1.3.2.7.1.10
The number of Line Code Violations (LCVs).
OBJECT-TYPE    
  PerfCurrentCount  

csDs3Ds1IntervalTable 1.3.6.1.4.1.3085.3.1.3.2.8
The DS1 Interval Table contains various statistics collected by each DS1 Interface over the previous 24 hours of operation. The past 24 hours are broken into 96 completed 15 minute intervals. Each row in this table represents one such interval (identified by csDs3Ds1IntervalNumber) for one specific instance (identified by csDs3Ds1Id).
OBJECT-TYPE    
  SEQUENCE OF  
    CsDs3Ds1IntervalEntry

csDs3Ds1IntervalEntry 1.3.6.1.4.1.3085.3.1.3.2.8.1
An entry in the DS1 Interval table.
OBJECT-TYPE    
  CsDs3Ds1IntervalEntry  

csDs3Ds1IntervalNumber 1.3.6.1.4.1.3085.3.1.3.2.8.1.1
A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 1.
OBJECT-TYPE    
  INTEGER 1..96  

csDs3Ds1IntervalESs 1.3.6.1.4.1.3085.3.1.3.2.8.1.2
The number of Errored Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

csDs3Ds1IntervalSESs 1.3.6.1.4.1.3085.3.1.3.2.8.1.3
The number of Severely Errored Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

csDs3Ds1IntervalSEFSs 1.3.6.1.4.1.3085.3.1.3.2.8.1.4
The number of Severely Errored Framing Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

csDs3Ds1IntervalUASs 1.3.6.1.4.1.3085.3.1.3.2.8.1.5
The number of Unavailable Seconds. This object may decrease if the occurance of unavailable seconds occurs across an inteval boundary.
OBJECT-TYPE    
  PerfIntervalCount  

csDs3Ds1IntervalCSSs 1.3.6.1.4.1.3085.3.1.3.2.8.1.6
The number of Controlled Slip Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

csDs3Ds1IntervalPCVs 1.3.6.1.4.1.3085.3.1.3.2.8.1.7
The number of Path Coding Violations.
OBJECT-TYPE    
  PerfIntervalCount  

csDs3Ds1IntervalLESs 1.3.6.1.4.1.3085.3.1.3.2.8.1.8
The number of Line Errored Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

csDs3Ds1IntervalBESs 1.3.6.1.4.1.3085.3.1.3.2.8.1.9
The number of Bursty Errored Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

csDs3Ds1IntervalDMs 1.3.6.1.4.1.3085.3.1.3.2.8.1.10
The number of Degraded Minutes.
OBJECT-TYPE    
  PerfIntervalCount  

csDs3Ds1IntervalLCVs 1.3.6.1.4.1.3085.3.1.3.2.8.1.11
The number of Line Code Violations.
OBJECT-TYPE    
  PerfIntervalCount  

csDs3Ds1IntervalValidData 1.3.6.1.4.1.3085.3.1.3.2.8.1.12
This variable indicates if the data for this interval is valid.
OBJECT-TYPE    
  TruthValue  

csDs3Ds1TotalTable 1.3.6.1.4.1.3085.3.1.3.2.9
The DS1 Total Table contains the cumulative sum of the various statistics for the 24 hour period preceding the current interval.
OBJECT-TYPE    
  SEQUENCE OF  
    CsDs3Ds1TotalEntry

csDs3Ds1TotalEntry 1.3.6.1.4.1.3085.3.1.3.2.9.1
An entry in the DS1 Total table.
OBJECT-TYPE    
  CsDs3Ds1TotalEntry  

csDs3Ds1TotalESs 1.3.6.1.4.1.3085.3.1.3.2.9.1.1
The sum of Errored Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
OBJECT-TYPE    
  PerfTotalCount  

csDs3Ds1TotalSESs 1.3.6.1.4.1.3085.3.1.3.2.9.1.2
The number of Severely Errored Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
OBJECT-TYPE    
  PerfTotalCount  

csDs3Ds1TotalSEFSs 1.3.6.1.4.1.3085.3.1.3.2.9.1.3
The number of Severely Errored Framing Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
OBJECT-TYPE    
  PerfTotalCount  

csDs3Ds1TotalUASs 1.3.6.1.4.1.3085.3.1.3.2.9.1.4
The number of Unavailable Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
OBJECT-TYPE    
  PerfTotalCount  

csDs3Ds1TotalCSSs 1.3.6.1.4.1.3085.3.1.3.2.9.1.5
The number of Controlled Slip Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
OBJECT-TYPE    
  PerfTotalCount  

csDs3Ds1TotalPCVs 1.3.6.1.4.1.3085.3.1.3.2.9.1.6
The number of Path Coding Violations encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
OBJECT-TYPE    
  PerfTotalCount  

csDs3Ds1TotalLESs 1.3.6.1.4.1.3085.3.1.3.2.9.1.7
The number of Line Errored Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
OBJECT-TYPE    
  PerfTotalCount  

csDs3Ds1TotalBESs 1.3.6.1.4.1.3085.3.1.3.2.9.1.8
The number of Bursty Errored Seconds (BESs) encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
OBJECT-TYPE    
  PerfTotalCount  

csDs3Ds1TotalDMs 1.3.6.1.4.1.3085.3.1.3.2.9.1.9
The number of Degraded Minutes (DMs) encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
OBJECT-TYPE    
  PerfTotalCount  

csDs3Ds1TotalLCVs 1.3.6.1.4.1.3085.3.1.3.2.9.1.10
The number of Line Code Violations (LCVs) encountered by a DS1 interface in the current 15 minute interval. Invalid 15 minute intervals count as 0.
OBJECT-TYPE    
  PerfTotalCount  

csUnchanDs3ConfigTable 1.3.6.1.4.1.3085.3.1.3.2.10
The Unchannelized DS3 configuration table.
OBJECT-TYPE    
  SEQUENCE OF  
    CsUnchanDs3ConfigEntry

csUnchanDs3ConfigEntry 1.3.6.1.4.1.3085.3.1.3.2.10.1
An entry in the Unchannelized DS3 Configuration table.
OBJECT-TYPE    
  CsUnchanDs3ConfigEntry  

csUnchanDs3ConfigSlotIndex 1.3.6.1.4.1.3085.3.1.3.2.10.1.1
This object identifies the blade to which this Unchannelized Ds3 Port is attached. Together with csUnchanDs3ConfigPortIndex, it uniquely identifies a physical port.
OBJECT-TYPE    
  Integer32 1..'7fffffff'h  

csUnchanDs3ConfigModuleIndex 1.3.6.1.4.1.3085.3.1.3.2.10.1.2
This object identifies the module on the Unchannelized Ds3 Blade.
OBJECT-TYPE    
  Integer32 1..'7fffffff'h  

csUnchanDs3ConfigPortIndex 1.3.6.1.4.1.3085.3.1.3.2.10.1.3
This object identifies the location of the Unchannelized Ds3 Port on the blade identified by csUnchanDs3SlotIndex. Together with csUnchanDs3ConfigSlotIndex, it uniquely identifies a physical port.
OBJECT-TYPE    
  Integer32 1..'7fffffff'h  

csUnchanDs3ConfigCableLength 1.3.6.1.4.1.3085.3.1.3.2.10.1.4
The length of the DS3 cable.
OBJECT-TYPE    
  Integer32 0..450  

csUnchanDs3ConfigFraming 1.3.6.1.4.1.3085.3.1.3.2.10.1.5
The framing format used on this Ds3 Interface. The default value is cbit if the interface is DS3. If the interface is E3, e3Framed will be used, and cannot be configured to any other types.
OBJECT-TYPE    
  INTEGER cbit(1), m23(2), auto(3), e3Framed(4)  

csUnchanDs3ConfigMdlPath 1.3.6.1.4.1.3085.3.1.3.2.10.1.6
This object controls the transmission of the MDL Path message. NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csUnchanDs3ConfigMdlIdleSig 1.3.6.1.4.1.3085.3.1.3.2.10.1.7
This object controls the transmission of the MDL Idle Signal message. NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csUnchanDs3ConfigMdlTestSig 1.3.6.1.4.1.3085.3.1.3.2.10.1.8
This object controls the transmission of the MDL Test Signal message. NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csUnchanDs3ConfigMdlEic 1.3.6.1.4.1.3085.3.1.3.2.10.1.9
This object specifies the Equipment Identification Code. NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  DisplayString SIZE(0..10)  

csUnchanDs3ConfigMdlLic 1.3.6.1.4.1.3085.3.1.3.2.10.1.10
This object specifies the Location Identification Code. NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  DisplayString SIZE(0..11)  

csUnchanDs3ConfigMdlFic 1.3.6.1.4.1.3085.3.1.3.2.10.1.11
This object specifies the Frame Identification Code. NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  DisplayString SIZE(0..10)  

csUnchanDs3ConfigMdlUnit 1.3.6.1.4.1.3085.3.1.3.2.10.1.12
This object specifies the Unit Identification Code. NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  DisplayString SIZE(0..6)  

csUnchanDs3ConfigMdlPfi 1.3.6.1.4.1.3085.3.1.3.2.10.1.13
This object specifies the Facility Identification Code sent in the MDL Path message. NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  DisplayString SIZE(0..38)  

csUnchanDs3ConfigMdlPort 1.3.6.1.4.1.3085.3.1.3.2.10.1.14
This object specifies the Port number string sent in the MDL Idle Signal message. NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  DisplayString SIZE(0..38)  

csUnchanDs3ConfigMdlGenerator 1.3.6.1.4.1.3085.3.1.3.2.10.1.15
This object specifies the Generator number string sent in the MDL Test Signal message. NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  DisplayString SIZE(0..38)  

csUnchanDs3ConfigAdminStatus 1.3.6.1.4.1.3085.3.1.3.2.10.1.16
This object is used to enable/disable this Ds3/E3 port.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csUnchanDs3ConfigOperStatus 1.3.6.1.4.1.3085.3.1.3.2.10.1.17
This object indicates the current operational status of this Ds3/E3 port.
OBJECT-TYPE    
  OperStatus  

csUnchanDs3ConfigClockSource 1.3.6.1.4.1.3085.3.1.3.2.10.1.18
This object specifies the source of the Transmit Clock used on this (unchannelized) DS3. If this object is set to internal(1), a local clock source is used. If this object is set to line(2), the recovered received clock is used as the transmit clock. NOTE: This is applicable only for DS3.
OBJECT-TYPE    
  INTEGER internal(1), line(2)  

csUnchanDs3ConfigEncap 1.3.6.1.4.1.3085.3.1.3.2.10.1.19
This object specifies the encapsulation used on this DS3/E3 port. If the encapsulation type is frameRelay(2), use the csFrameRelayTable to configure the Frame Relay specific parameters.
OBJECT-TYPE    
  INTEGER none(0), ppp(1), frameRelay(2), ciscoHdlc(3)  

csUnchanDs3ConfigSendCode 1.3.6.1.4.1.3085.3.1.3.2.10.1.20
This variable indicates what type of code is being sent across the DS3 interface by the device. Setting this variable causes the interface to begin sending the code requested. NOTE: This is applicable only for DS3. The values mean: sendNoCode sending looped or normal data sendLineCode sending a request for a line loopback sendResetCode sending a loopback deactivation request
OBJECT-TYPE    
  INTEGER ds3SendNoCode(1), ds3SendLineCode(2), ds3SendResetCode(3)  

csUnchanDs3ConfigLoopbackType 1.3.6.1.4.1.3085.3.1.3.2.10.1.21
This object represents the desired loopback configuration of the DS3 interface. The values mean: noLoop Not in the loopback state. A device that is not capable of performing a loopback on the interface shall always return this as its value. lineLoop The received signal at this interface does not go through the device (minimum penetration) but is looped back out. otherLoop Loopbacks that are not defined here. Currently not used in the IPSX system. inwardLoop The sent signal at this interface is looped back through the device. dualLoop Both lineLoop and inwardLoop will be active simultaneously.
OBJECT-TYPE    
  INTEGER noLoop(1), lineLoop(2), otherLoop(3), inwardLoop(4), dualLoop(5)  

csUnchanDs3ConfigLoopbackStatus 1.3.6.1.4.1.3085.3.1.3.2.10.1.22
This variable represents the current state of the loopback on the DS3 interface. It contains information about loopbacks established by a manager and remotely from the far end. The csUnchanDs3ConfigLoopbackStatus is a bit map represented as a sum, therefore is can represent multiple loopbacks simultaneously. The various bit positions are: 1 ds3NoLoopback 2 ds3NearEndPayloadLoopback 4 ds3NearEndLineLoopback 8 ds3NearEndOtherLoopback 16 ds3NearEndInwardLoopback 32 ds3FarEndPayloadLoopback 64 ds3FarEndLineLoopback
OBJECT-TYPE    
  INTEGER 1..127  

csUnchanDs3ConfigLineStatus 1.3.6.1.4.1.3085.3.1.3.2.10.1.23
This variable indicates the Line Status of the interface. It contains loopback state information and failure state information. The csUnchanDs3ConfigLineStatus is a bit map represented as a sum, therefore, it can represent multiple failures and a loopback (see csUnchanDs3ConfigLoopbackStatus object for the type of loopback) simultaneously. The ds3NoAlarm must be set if and only if no other flag is set. If the ds3LoopbackState bit is set, the loopback in effect can be determined from the csUnchanDs3ConfigLoopbackStatus object. The various bit positions are: 0 ds3NoAlarm No alarm present 1 ds3RcvRAIFailure Receiving Yellow/Remote Alarm Indication 2 ds3XmitRAIAlarm Transmitting Yellow/Remote Alarm Indication 3 ds3RcvAIS Receiving AIS failure state 4 ds3XmitAIS Transmitting AIS 5 ds3LOF Receiving LOF failure state 6 ds3LOS Receiving LOS failure state 7 ds3LoopbackState Looping the received signal 8 ds3RcvTestCode Receiving a Test Pattern 9 ds3OtherFailure any line status not defined here 10 ds3UnavailSigState Near End in Unavailable Signal State 11 ds3NetEquipOOS Carrier Equipment Out of Service
OBJECT-TYPE    
  INTEGER 1..4095  

csUnchanDs3ConfigTimeElapsed 1.3.6.1.4.1.3085.3.1.3.2.10.1.24
The number of seconds that have elapsed since the beginning of the near end current error-measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.
OBJECT-TYPE    
  INTEGER 0..899  

csUnchanDs3ConfigValidInterval 1.3.6.1.4.1.3085.3.1.3.2.10.1.25
The number of previous near end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15 minute near end intervals since the interface has been online. In the case where the agent is a proxy, it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.
OBJECT-TYPE    
  INTEGER 1..96  

csUnchanDs3ConfigInvalidInterval 1.3.6.1.4.1.3085.3.1.3.2.10.1.26
The number of intervals in the range from 0 to csDs3ConfigValidInterval for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).
OBJECT-TYPE    
  INTEGER 1..96  

csUnchanDs3ConfigDeviceType 1.3.6.1.4.1.3085.3.1.3.2.10.1.27
This object indicates whether the interface is DS3 or E3.
OBJECT-TYPE    
  INTEGER ds3(1), e3(2)  

csOrionOc3Info 1.3.6.1.4.1.3085.3.1.3.3
OBJECT IDENTIFIER    

csOrionOc3Config 1.3.6.1.4.1.3085.3.1.3.3.1
OBJECT IDENTIFIER    

csOc3ConfigTable 1.3.6.1.4.1.3085.3.1.3.3.1.1
The OC3 configuration table.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOc3ConfigEntry

csOc3ConfigEntry 1.3.6.1.4.1.3085.3.1.3.3.1.1.1
An entry in the DS3 Configuration table.
OBJECT-TYPE    
  CsOc3ConfigEntry  

csOc3SlotIndex 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.1
This object identifies the blade to which this OC3 Port is attached. Together with csOc3ModuleIndex, csOc3PortIndex, it uniquely identifies a physical port.
OBJECT-TYPE    
  Integer32 1..'7fffffff'h  

csOc3ModuleIndex 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.2
This object identifies the module on the OC3 blade
OBJECT-TYPE    
  Integer32 1..'7fffffff'h  

csOc3PortIndex 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.3
This object identifies the location of the OC3 Port on the blade identified by csOc3SlotIndex, csOc3ModuleIndex. Together with csOc3SlotIndex, it uniquely identifies a physical port.
OBJECT-TYPE    
  Integer32 1..'7fffffff'h  

csOc3ClockSource 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.4
This object identifies the source of the clock signal for this OC3 port.
OBJECT-TYPE    
  INTEGER internal(1), line(2)  

csOc3CrcType 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.5
This object identifies the type of CRC used on this OC3 port. This is only used by Packet Over Sonet.
OBJECT-TYPE    
  INTEGER crc16(1), crc32(2)  

csOc3SectionJ0 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.6
This object identifies the section trace byte (j0) used on this OC3 port. If this object is set to hex01(1), the value sent within the j0 (section trace byte) element of the frame header is 0x01. This value should be set for interoperability with some SDH devices in Japan. If this object is set to hexCC(2), the value of the j0 element is 0xcc. This is the default value and should be used in the majority of cases.
OBJECT-TYPE    
  INTEGER hex01(1), hexCC(2)  

csOc3LineS1S0 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.7
This object identifies the payload pointer byte (s1s0) used on this OC3 port. If this object is set to oc3c(1), the value sent within the s1s0 (payload pointer byte) element of the frame header is 0. If this object is set to au4(2), the value of the s1s0 element is 2.
OBJECT-TYPE    
  INTEGER oc3c(1), au4(2)  

csOc3PathC2 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.8
This object identifies the path signal identifier used on this OC3 port. If this object is set to pppOrHdlc(1), the value sent within the c2 (path signal identifier) element of the frame header is 0xCF. If this object is set to atm(2), the value of the c2 element is 0x13.
OBJECT-TYPE    
  INTEGER pos(1), atm(2)  

csOc3PathJ1 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.9
This object is the path trace sent in the J1 byte of path overhead. It is padded by the OC3 driver with and to make up the 64-byte length.
OBJECT-TYPE    
  DisplayString SIZE(0..62)  

csOc3FarEndJ1 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.10
The expected path trace of the far end interface.
OBJECT-TYPE    
  DisplayString SIZE(0..62)  

csOc3Scramble 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.11
This object controls the scrambling feature on this OC3 port. If this object is enabled, the SPE payload will be scrambled. If this object is diabled, the SPE payload will not be scrambled. SPE payload refers to that of either ATM or POS depending on the value of csOc3PathC2.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOc3NearEndPerfMonControl 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.12
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOc3FarEndPerfMonControl 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.13
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOc3ApsControl 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.14
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOc3ApsForce 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.15
Force protection switch. When set to 'forceToSwitch' it switches the active port between the two internal ports indicated by csOc3ApsActivePort object. NOTE: This is an action object. Read operation returns 'none'.
OBJECT-TYPE    
  INTEGER none(1), forceToSwitch(2)  

csOc3ApsActivePort 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.16
This object indicates which of the internal port is currently active. The non-active one is used for protection.
OBJECT-TYPE    
  INTEGER portOne(1), portTwo(2)  

csOc3AlarmControl 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.17
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOc3Loopback 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.18
The current loopback state of the SONET/SDH interface. The values mean: noLoop Not in the loopback state. A device that is not capable of performing a loopback on this interface shall always return this value. facilityLoop The received signal at this interface is looped back out through the corresponding transmitter in the return direction. terminalLoop The signal that is about to be transmitted is connected to the associated incoming receiver.
OBJECT-TYPE    
  INTEGER noLoop(1), facilityLoop(2), terminalLoop(3)  

csOc3AdminStatus 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.19
This object is used to enable/disable this Ds3 port.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOc3OperStatus 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.20
This object indicates the current operational status of this Ds3 port.
OBJECT-TYPE    
  OperStatus  

csOc3TimeElapsed 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.21
The number of seconds that have elapsed since the beginning of the current measurement period.
OBJECT-TYPE    
  Integer32 1..900  

csOc3ValidIntervals 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.22
This object indicates the number of previous 15-minute intervals for which data was collected.
OBJECT-TYPE    
  Integer32 0..32  

csOc3InvalidIntervals 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.23
This object indicates the number of previous 15-minute intervals for which data was not able to be collected.
OBJECT-TYPE    
  Integer32 0..32  

csOc3PosEncapType 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.24
This object specifies the encapsulation used on this port. If the encapsulation type is frameRelay(2), use the csFrameRelayTable to configure the Frame Relay specific parameters.
OBJECT-TYPE    
  INTEGER none(0), ppp(1), frameRelay(2), ciscoHdlc(3)  

csOc3PosEmptyCellType 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.25
This object is used to select the type of empty cell to be transmitted. It is deprecated due to not being supported in POS.
OBJECT-TYPE    
  INTEGER unassigned(1), idle(2)  

csOc3PosMaxPacketSize 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.26
This object specifies the maximum packet size required for this port. This object applies to POS only.
OBJECT-TYPE    
  Integer32 4..65535  

csOc3PosOperStatus 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.27
This object indicates the current operational status of this channel. It is deprecated in favor of using csOc3AdminStatus instead.
OBJECT-TYPE    
  OperStatus  

csOc3MediumLineType 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.28
This object describes the line type for this interface. The line types are Short and Long Range Single Mode fiber or Multi-Mode fiber interfaces, and coax and UTP for electrical interfaces. The value sonetOther should be used when the Line Type is not one of the listed values.
OBJECT-TYPE    
  INTEGER ocNOther(1), ocNShortSingleMode(2), ocNLongSingleMode(3), ocNMultiMode(4), ocNCoax(5), ocNUTP(6)  

csOc3ReceivedPathJ1 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.29
The actual received path trace of the far end interface.
OBJECT-TYPE    
  DisplayString SIZE(0..62)  

csOcNSpeed 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.30
The speed of OCn interface.
OBJECT-TYPE    
  INTEGER mbps155(1), mbps622(2)  

csOrionOc3Section 1.3.6.1.4.1.3085.3.1.3.3.2
OBJECT IDENTIFIER    

csOc3SectionCurrentTable 1.3.6.1.4.1.3085.3.1.3.3.2.1
The SONET/SDH Section Current table.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOc3SectionCurrentEntry

csOc3SectionCurrentEntry 1.3.6.1.4.1.3085.3.1.3.3.2.1.1
An entry in the SONET/SDH Section Current table.
OBJECT-TYPE    
  CsOc3SectionCurrentEntry  

csOc3SectionCurrentStatus 1.3.6.1.4.1.3085.3.1.3.3.2.1.1.1
This variable indicates the status of the interface. The sonetSectionCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The csOc3SectionNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 csOc3SectionNoDefect 2 csOc3SectionLOS 4 csOc3SectionLOF
OBJECT-TYPE    
  Integer32 1..6  

csOc3SectionCurrentESs 1.3.6.1.4.1.3085.3.1.3.3.2.1.1.2
The counter associated with the number of Errored Seconds encountered by a SONET/SDH Section in the current 15-minute interval.
OBJECT-TYPE    
  PerfCurrentCount  

csOc3SectionCurrentSESs 1.3.6.1.4.1.3085.3.1.3.3.2.1.1.3
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Section in the current 15-minute interval.
OBJECT-TYPE    
  PerfCurrentCount  

csOc3SectionCurrentSEFSs 1.3.6.1.4.1.3085.3.1.3.3.2.1.1.4
The counter associated with the number of Severely Errored Framing Seconds encountered by a SONET/SDH Section in the current 15 minute interval.
OBJECT-TYPE    
  PerfCurrentCount  

csOc3SectionCurrentCVs 1.3.6.1.4.1.3085.3.1.3.3.2.1.1.5
The counter associated with the number of Coding Violations encountered by a SONET/SDH Section in the current 15 minute interval.
OBJECT-TYPE    
  PerfCurrentCount  

csOc3SectionIntervalTable 1.3.6.1.4.1.3085.3.1.3.3.2.2
The SONET/SDH Section Interval table.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOc3SectionIntervalEntry

csOc3SectionIntervalEntry 1.3.6.1.4.1.3085.3.1.3.3.2.2.1
An entry in the SONET/SDH Section Interval table.
OBJECT-TYPE    
  CsOc3SectionIntervalEntry  

csOc3SectionIntervalNumber 1.3.6.1.4.1.3085.3.1.3.3.2.2.1.1
A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1.
OBJECT-TYPE    
  Integer32 1..96  

csOc3SectionIntervalESs 1.3.6.1.4.1.3085.3.1.3.3.2.2.1.2
The counter associated with the number of Errored Seconds encountered by a SONET/SDH Section in a particular 15-minute interval in the past 24 hours.
OBJECT-TYPE    
  PerfIntervalCount  

csOc3SectionIntervalSESs 1.3.6.1.4.1.3085.3.1.3.3.2.2.1.3
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Section in a particular 15-minute interval in the past 24 hours.
OBJECT-TYPE    
  PerfIntervalCount  

csOc3SectionIntervalSEFSs 1.3.6.1.4.1.3085.3.1.3.3.2.2.1.4
The counter associated with the number of Severely Errored Framing Seconds encountered by a SONET/SDH Section in a particular 15-minute interval in the past 24 hours.
OBJECT-TYPE    
  PerfIntervalCount  

csOc3SectionIntervalCVs 1.3.6.1.4.1.3085.3.1.3.3.2.2.1.5
The counter associated with the number of Coding Violations encountered by a SONET/SDH Section in a particular 15-minute interval in the past 24 hours.
OBJECT-TYPE    
  PerfIntervalCount  

csOc3SectionIntervalValidData 1.3.6.1.4.1.3085.3.1.3.3.2.2.1.6
This variable indicates if the data for this interval is valid.
OBJECT-TYPE    
  TruthValue  

csOc3SectionDayTable 1.3.6.1.4.1.3085.3.1.3.3.2.3
The SONET/SDH Section Day table.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOc3SectionDayEntry

csOc3SectionDayEntry 1.3.6.1.4.1.3085.3.1.3.3.2.3.1
An entry in the SONET/SDH Section Day table.
OBJECT-TYPE    
  CsOc3SectionDayEntry  

csOc3SectionDayESs 1.3.6.1.4.1.3085.3.1.3.3.2.3.1.1
The counter associated with the number of Errored Seconds encountered by a SONET/SDH Section for the day.
OBJECT-TYPE    
  PerfCurrentCount  

csOc3SectionDaySESs 1.3.6.1.4.1.3085.3.1.3.3.2.3.1.2
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Section for the day.
OBJECT-TYPE    
  PerfCurrentCount  

csOc3SectionDaySEFSs 1.3.6.1.4.1.3085.3.1.3.3.2.3.1.3
The counter associated with the number of Severely Errored Framing Seconds encountered by a SONET/SDH Section for the day.
OBJECT-TYPE    
  PerfCurrentCount  

csOc3SectionDayCVs 1.3.6.1.4.1.3085.3.1.3.3.2.3.1.4
The counter associated with the number of Coding Violations encountered by a SONET/SDH Section for the day.
OBJECT-TYPE    
  PerfCurrentCount  

csOc3SectionPrevDayTable 1.3.6.1.4.1.3085.3.1.3.3.2.4
The SONET/SDH Section Previous Day table.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOc3SectionPrevDayEntry

csOc3SectionPrevDayEntry 1.3.6.1.4.1.3085.3.1.3.3.2.4.1
An entry in the SONET/SDH Section Day table.
OBJECT-TYPE    
  CsOc3SectionPrevDayEntry  

csOc3SectionPrevDayESs 1.3.6.1.4.1.3085.3.1.3.3.2.4.1.1
The counter associated with the number of Errored Seconds encountered by a SONET/SDH Section for the previous day.
OBJECT-TYPE    
  PerfCurrentCount  

csOc3SectionPrevDaySESs 1.3.6.1.4.1.3085.3.1.3.3.2.4.1.2
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Section for the previous day.
OBJECT-TYPE    
  PerfCurrentCount  

csOc3SectionPrevDaySEFSs 1.3.6.1.4.1.3085.3.1.3.3.2.4.1.3
The counter associated with the number of Severely Errored Framing Seconds encountered by a SONET/SDH Section for the previous day.
OBJECT-TYPE    
  PerfCurrentCount  

csOc3SectionPrevDayCVs 1.3.6.1.4.1.3085.3.1.3.3.2.4.1.4
The counter associated with the number of Coding Violations encountered by a SONET/SDH Section for the previous day.
OBJECT-TYPE    
  PerfCurrentCount  

csOrionOc3Line 1.3.6.1.4.1.3085.3.1.3.3.3
OBJECT IDENTIFIER    

csOc3LineCurrentTable 1.3.6.1.4.1.3085.3.1.3.3.3.1
The SONET/SDH Line Current table.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOc3LineCurrentEntry

csOc3LineCurrentEntry 1.3.6.1.4.1.3085.3.1.3.3.3.1.1
An entry in the SONET/SDH Line Current table.
OBJECT-TYPE    
  CsOc3LineCurrentEntry  

csOc3LineCurrentStatus 1.3.6.1.4.1.3085.3.1.3.3.3.1.1.1
This variable indicates the status of the interface. The sonetLineCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The sonetLineNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 csOc3LineNoDefect 2 csOc3LineAIS 4 csOc3LineRDI
OBJECT-TYPE    
  Integer32 1..6  

csOc3LineCurrentESs 1.3.6.1.4.1.3085.3.1.3.3.3.1.1.2
The counter associated with the number of Errored Seconds encountered by a SONET/SDH Line in the current 15 minute interval.
OBJECT-TYPE    
  PerfCurrentCount  

csOc3LineCurrentSESs 1.3.6.1.4.1.3085.3.1.3.3.3.1.1.3
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Line in the current 15 minute interval.
OBJECT-TYPE    
  PerfCurrentCount  

csOc3LineCurrentCVs 1.3.6.1.4.1.3085.3.1.3.3.3.1.1.4
The counter associated with the number of Coding Violations encountered by a SONET/SDH Line in the current 15 minute interval.
OBJECT-TYPE    
  PerfCurrentCount  

csOc3LineCurrentUASs 1.3.6.1.4.1.3085.3.1.3.3.3.1.1.5
The counter associated with the number of Unavailable Seconds encountered by a SONET/SDH Line in the current 15 minute interval.
OBJECT-TYPE    
  PerfCurrentCount  

csOc3LineCurrentFCs 1.3.6.1.4.1.3085.3.1.3.3.3.1.1.6
The counter associated with the number of failure counts encountered by a SONET/SDH Line in the current 15 minute interval.
OBJECT-TYPE    
  PerfCurrentCount  

csOc3LineIntervalTable 1.3.6.1.4.1.3085.3.1.3.3.3.2
The SONET/SDH Line Interval table.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOc3LineIntervalEntry

csOc3LineIntervalEntry 1.3.6.1.4.1.3085.3.1.3.3.3.2.1
An entry in the SONET/SDH Line Interval table.
OBJECT-TYPE    
  CsOc3LineIntervalEntry  

csOc3LineIntervalNumber 1.3.6.1.4.1.3085.3.1.3.3.3.2.1.1
A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1.
OBJECT-TYPE    
  Integer32 1..96  

csOc3LineIntervalESs 1.3.6.1.4.1.3085.3.1.3.3.3.2.1.2
The counter associated with the number of Errored Seconds encountered by a SONET/SDH Line in a particular 15-minute interval in the past 24 hours.
OBJECT-TYPE    
  PerfIntervalCount  

csOc3LineIntervalSESs 1.3.6.1.4.1.3085.3.1.3.3.3.2.1.3
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Line in a particular 15-minute interval in the past 24 hours.
OBJECT-TYPE    
  PerfIntervalCount  

csOc3LineIntervalCVs 1.3.6.1.4.1.3085.3.1.3.3.3.2.1.4
The counter associated with the number of Coding Violations encountered by a SONET/SDH Line in a particular 15-minute interval in the past 24 hours.
OBJECT-TYPE    
  PerfIntervalCount  

csOc3LineIntervalUASs 1.3.6.1.4.1.3085.3.1.3.3.3.2.1.5
The counter associated with the number of Unavailable Seconds encountered by a SONET/SDH Line in a particular 15-minute interval in the past 24 hours.
OBJECT-TYPE    
  PerfIntervalCount  

csOc3LineIntervalValidData 1.3.6.1.4.1.3085.3.1.3.3.3.2.1.6
This variable indicates if the data for this interval is valid.
OBJECT-TYPE    
  TruthValue  

csOc3LineIntervalFCs 1.3.6.1.4.1.3085.3.1.3.3.3.2.1.7
The counter associated with the number of failure counts encountered by a SONET/SDH Line in a particular 15-minute interval in the past 24 hours.
OBJECT-TYPE    
  PerfIntervalCount  

csOc3LineDayTable 1.3.6.1.4.1.3085.3.1.3.3.3.3
The SONET/SDH Line Day table.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOc3LineDayEntry

csOc3LineDayEntry 1.3.6.1.4.1.3085.3.1.3.3.3.3.1
An entry in the SONET/SDH Line Day table.
OBJECT-TYPE    
  CsOc3LineDayEntry  

csOc3LineDayESs 1.3.6.1.4.1.3085.3.1.3.3.3.3.1.1
The counter associated with the number of Errored Seconds encountered by a SONET/SDH Line for the day.
OBJECT-TYPE    
  PerfCurrentCount  

csOc3LineDaySESs 1.3.6.1.4.1.3085.3.1.3.3.3.3.1.2
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Line for the day.
OBJECT-TYPE    
  PerfCurrentCount  

csOc3LineDayCVs 1.3.6.1.4.1.3085.3.1.3.3.3.3.1.3
The counter associated with the number of Coding Violations encountered by a SONET/SDH Line for the day.
OBJECT-TYPE    
  PerfCurrentCount  

csOc3LineDayUASs 1.3.6.1.4.1.3085.3.1.3.3.3.3.1.4
The counter associated with the number of Unavailable Seconds encountered by a SONET/SDH Line for the day.
OBJECT-TYPE    
  PerfCurrentCount  

csOc3LineDayFCs 1.3.6.1.4.1.3085.3.1.3.3.3.3.1.5
The counter associated with the number of failure counts encountered by a SONET/SDH Line for the day.
OBJECT-TYPE    
  PerfCurrentCount  

csOc3LinePrevDayTable 1.3.6.1.4.1.3085.3.1.3.3.3.4
The SONET/SDH Line Day table.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOc3LinePrevDayEntry

csOc3LinePrevDayEntry 1.3.6.1.4.1.3085.3.1.3.3.3.4.1
An entry in the SONET/SDH Line Previous Day table.
OBJECT-TYPE    
  CsOc3LinePrevDayEntry  

csOc3LinePrevDayESs 1.3.6.1.4.1.3085.3.1.3.3.3.4.1.1
The counter associated with the number of Errored Seconds encountered by a SONET/SDH Line for the previous day.
OBJECT-TYPE    
  PerfCurrentCount  

csOc3LinePrevDaySESs 1.3.6.1.4.1.3085.3.1.3.3.3.4.1.2
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Line for the previous day.
OBJECT-TYPE    
  PerfCurrentCount  

csOc3LinePrevDayCVs 1.3.6.1.4.1.3085.3.1.3.3.3.4.1.3
The counter associated with the number of Coding Violations encountered by a SONET/SDH Line for the previous day.
OBJECT-TYPE    
  PerfCurrentCount  

csOc3LinePrevDayUASs 1.3.6.1.4.1.3085.3.1.3.3.3.4.1.4
The counter associated with the number of Unavailable Seconds encountered by a SONET/SDH Line for the previous day.
OBJECT-TYPE    
  PerfCurrentCount  

csOc3LinePrevDayFCs 1.3.6.1.4.1.3085.3.1.3.3.3.4.1.5
The counter associated with the number of failure counts encountered by a SONET/SDH Line for the previous day.
OBJECT-TYPE    
  PerfCurrentCount  

csOrionOc3FarEndLine 1.3.6.1.4.1.3085.3.1.3.3.4
OBJECT IDENTIFIER    

csOrionOc3Path 1.3.6.1.4.1.3085.3.1.3.3.5
OBJECT IDENTIFIER    

csOc3PathCurrentTable 1.3.6.1.4.1.3085.3.1.3.3.5.1
The SONET/SDH Path Current table.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOc3PathCurrentEntry

csOc3PathCurrentEntry 1.3.6.1.4.1.3085.3.1.3.3.5.1.1
An entry in the SONET/SDH Path Current table.
OBJECT-TYPE    
  CsOc3PathCurrentEntry  

csOc3PathCurrentWidth 1.3.6.1.4.1.3085.3.1.3.3.5.1.1.1
A value that indicates the type of the SONET/SDH Path. For SONET, the assigned types are the STS-Nc SPEs, where N = 1, 3, 12, 24, and 48. STS-1 is equal to 51.84 Mbps. For SDH, the assigned types are the STM-Nc VCs, where N = 1, 4, and 16.
OBJECT-TYPE    
  INTEGER sts1(1), sts3cSTM1(2), sts12cSTM4(3), sts24c(4), sts48cSTM16(5)  

csOc3PathCurrentStatus 1.3.6.1.4.1.3085.3.1.3.3.5.1.1.2
This variable indicates the status of the interface. The sonetPathCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The sonetPathNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 sonetPathNoDefect 2 sonetPathSTSLOP 4 sonetPathSTSAIS 8 sonetPathSTSRDI 16 sonetPathUnequipped 32 sonetPathSignalLabelMismatch
OBJECT-TYPE    
  Integer32 1..62  

csOc3PathCurrentESs 1.3.6.1.4.1.3085.3.1.3.3.5.1.1.3
The counter associated with the number of Errored Seconds encountered by a SONET/SDH Path in the current 15 minute interval.
OBJECT-TYPE    
  PerfCurrentCount  

csOc3PathCurrentSESs 1.3.6.1.4.1.3085.3.1.3.3.5.1.1.4
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Path in the current 15 minute interval.
OBJECT-TYPE    
  PerfCurrentCount  

csOc3PathCurrentCVs 1.3.6.1.4.1.3085.3.1.3.3.5.1.1.5
The counter associated with the number of Coding Violations encountered by a SONET/SDH Path in the current 15 minute interval.
OBJECT-TYPE    
  PerfCurrentCount  

csOc3PathCurrentUASs 1.3.6.1.4.1.3085.3.1.3.3.5.1.1.6
The counter associated with the number of Unavailable Seconds encountered by a Path in the current 15 minute interval.
OBJECT-TYPE    
  PerfCurrentCount  

csOc3PathCurrentFCs 1.3.6.1.4.1.3085.3.1.3.3.5.1.1.7
The counter associated with the number of failure counts encountered by a Path in the current 15 minute interval.
OBJECT-TYPE    
  PerfCurrentCount  

csOc3PathIntervalTable 1.3.6.1.4.1.3085.3.1.3.3.5.2
The SONET/SDH Path Interval table.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOc3PathIntervalEntry

csOc3PathIntervalEntry 1.3.6.1.4.1.3085.3.1.3.3.5.2.1
An entry in the SONET/SDH Path Interval table.
OBJECT-TYPE    
  CsOc3PathIntervalEntry  

csOc3PathIntervalNumber 1.3.6.1.4.1.3085.3.1.3.3.5.2.1.1
A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1.
OBJECT-TYPE    
  Integer32 1..96  

csOc3PathIntervalESs 1.3.6.1.4.1.3085.3.1.3.3.5.2.1.2
The counter associated with the number of Errored Seconds encountered by a SONET/SDH Path in a particular 15-minute interval in the past 24 hours.
OBJECT-TYPE    
  PerfIntervalCount  

csOc3PathIntervalSESs 1.3.6.1.4.1.3085.3.1.3.3.5.2.1.3
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Path in a particular 15-minute interval in the past 24 hours.
OBJECT-TYPE    
  PerfIntervalCount  

csOc3PathIntervalCVs 1.3.6.1.4.1.3085.3.1.3.3.5.2.1.4
The counter associated with the number of Coding Violations encountered by a SONET/SDH Path in a particular 15-minute interval in the past 24 hours.
OBJECT-TYPE    
  PerfIntervalCount  

csOc3PathIntervalUASs 1.3.6.1.4.1.3085.3.1.3.3.5.2.1.5
The counter associated with the number of Unavailable Seconds encountered by a Path in a particular 15-minute interval in the past 24 hours.
OBJECT-TYPE    
  PerfIntervalCount  

csOc3PathIntervalValidData 1.3.6.1.4.1.3085.3.1.3.3.5.2.1.6
This variable indicates if the data for this interval is valid.
OBJECT-TYPE    
  TruthValue  

csOc3PathIntervalFCs 1.3.6.1.4.1.3085.3.1.3.3.5.2.1.7
The counter associated with the number of failure counts encountered by a Path in a particular 15-minute interval in the past 24 hours.
OBJECT-TYPE    
  PerfIntervalCount  

csOc3PathDayTable 1.3.6.1.4.1.3085.3.1.3.3.5.3
The SONET/SDH Path Day table.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOc3PathDayEntry

csOc3PathDayEntry 1.3.6.1.4.1.3085.3.1.3.3.5.3.1
An entry in the SONET/SDH Path Day table.
OBJECT-TYPE    
  CsOc3PathDayEntry  

csOc3PathDayESs 1.3.6.1.4.1.3085.3.1.3.3.5.3.1.1
The counter associated with the number of Errored Seconds encountered by a SONET/SDH Path for the day.
OBJECT-TYPE    
  PerfCurrentCount  

csOc3PathDaySESs 1.3.6.1.4.1.3085.3.1.3.3.5.3.1.2
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Path for the day.
OBJECT-TYPE    
  PerfCurrentCount  

csOc3PathDayCVs 1.3.6.1.4.1.3085.3.1.3.3.5.3.1.3
The counter associated with the number of Coding Violations encountered by a SONET/SDH Path for the day.
OBJECT-TYPE    
  PerfCurrentCount  

csOc3PathDayUASs 1.3.6.1.4.1.3085.3.1.3.3.5.3.1.4
The counter associated with the number of Unavailable Seconds encountered by a Path for the day.
OBJECT-TYPE    
  PerfCurrentCount  

csOc3PathDayFCs 1.3.6.1.4.1.3085.3.1.3.3.5.3.1.5
The counter associated with the number of failure counts encountered by a Path for the day.
OBJECT-TYPE    
  PerfCurrentCount  

csOc3PathPrevDayTable 1.3.6.1.4.1.3085.3.1.3.3.5.4
The SONET/SDH Path Previous Day table.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOc3PathPrevDayEntry

csOc3PathPrevDayEntry 1.3.6.1.4.1.3085.3.1.3.3.5.4.1
An entry in the SONET/SDH Path Day table.
OBJECT-TYPE    
  CsOc3PathPrevDayEntry  

csOc3PathPrevDayESs 1.3.6.1.4.1.3085.3.1.3.3.5.4.1.1
The counter associated with the number of Errored Seconds encountered by a SONET/SDH Path for the previous day.
OBJECT-TYPE    
  PerfCurrentCount  

csOc3PathPrevDaySESs 1.3.6.1.4.1.3085.3.1.3.3.5.4.1.2
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Path for the previous day.
OBJECT-TYPE    
  PerfCurrentCount  

csOc3PathPrevDayCVs 1.3.6.1.4.1.3085.3.1.3.3.5.4.1.3
The counter associated with the number of Coding Violations encountered by a SONET/SDH Path for the previous day.
OBJECT-TYPE    
  PerfCurrentCount  

csOc3PathPrevDayUASs 1.3.6.1.4.1.3085.3.1.3.3.5.4.1.4
The counter associated with the number of Unavailable Seconds encountered by a Path for the previous day.
OBJECT-TYPE    
  PerfCurrentCount  

csOc3PathPrevDayFCs 1.3.6.1.4.1.3085.3.1.3.3.5.4.1.5
The counter associated with the number of failure counts encountered by a Path for the previous day.
OBJECT-TYPE    
  PerfCurrentCount  

csOrionOc3FarEndPath 1.3.6.1.4.1.3085.3.1.3.3.6
OBJECT IDENTIFIER    

csOrionOc3PosStats 1.3.6.1.4.1.3085.3.1.3.3.7
OBJECT IDENTIFIER    

csOc3PosStatsTable 1.3.6.1.4.1.3085.3.1.3.3.7.1
The OC3/POS statistics counter table.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOc3PosStatsEntry

csOc3PosStatsEntry 1.3.6.1.4.1.3085.3.1.3.3.7.1.1
An entry in the OC3/POS statistics counter table.
OBJECT-TYPE    
  CsOc3PosStatsEntry  

csOc3PosRcvBytes 1.3.6.1.4.1.3085.3.1.3.3.7.1.1.1
The counter associated with the number of bytes written to receive FIFO.
OBJECT-TYPE    
  Counter64  

csOc3PosRcvFrames 1.3.6.1.4.1.3085.3.1.3.3.7.1.1.2
The counter indicates the number of frames successfully received in a 15 minute interval.
OBJECT-TYPE    
  Counter64  

csOc3PosRcvAbortedFrames 1.3.6.1.4.1.3085.3.1.3.3.7.1.1.3
The counter indicates the number of aborted frames received.
OBJECT-TYPE    
  Counter64  

csOc3PosRcvFrameFCSError 1.3.6.1.4.1.3085.3.1.3.3.7.1.1.4
The counter indicates the number of received frames with FCS error.
OBJECT-TYPE    
  Counter64  

csOc3PosRcvFrameMinPacketError 1.3.6.1.4.1.3085.3.1.3.3.7.1.1.5
The counter indicates the number of received frames violating the minimal packet length.
OBJECT-TYPE    
  Counter64  

csOc3PosRcvFrameMaxPacketError 1.3.6.1.4.1.3085.3.1.3.3.7.1.1.6
The counter indicates the number of received frames violating the maximum packet length.
OBJECT-TYPE    
  Counter64  

csOc3PosSentBytes 1.3.6.1.4.1.3085.3.1.3.3.7.1.1.7
The counter indicates the number of bytes trasmitted.
OBJECT-TYPE    
  Counter64  

csOc3PosSentFrames 1.3.6.1.4.1.3085.3.1.3.3.7.1.1.8
The counter indicates the number of frames trasmitted.
OBJECT-TYPE    
  Counter64  

csOc3PosSentFrameUserAborted 1.3.6.1.4.1.3085.3.1.3.3.7.1.1.9
The counter indicates the number of transmit frames aborted by the user.
OBJECT-TYPE    
  Counter64  

csOc3PosSentFrameUnderrunAborted 1.3.6.1.4.1.3085.3.1.3.3.7.1.1.10
The counter indicates the number of transmit frames aborted due to FIFO underrun.
OBJECT-TYPE    
  Counter64  

csOrionOc3PosStatsEnd 1.3.6.1.4.1.3085.3.1.3.3.7.2
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionOc3AtmStats 1.3.6.1.4.1.3085.3.1.3.3.8
OBJECT IDENTIFIER    

csOc3AtmCurrentStatsTable 1.3.6.1.4.1.3085.3.1.3.3.8.1
The OC3 ATM statistics counter table.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOc3AtmCurrentStatsEntry

csOc3AtmCurrentStatsEntry 1.3.6.1.4.1.3085.3.1.3.3.8.1.1
An entry in the OC3 statistics counter table.
OBJECT-TYPE    
  CsOc3AtmCurrentStatsEntry  

csOc3AtmCurrentTransmittedCells 1.3.6.1.4.1.3085.3.1.3.3.8.1.1.1
The counter indicates the number of transmitted cells at OC3-ATM interface
OBJECT-TYPE    
  Counter64  

csOc3AtmCurrentRecievedCells 1.3.6.1.4.1.3085.3.1.3.3.8.1.1.2
The counter indicates the number of received cells at OC3-ATM interface
OBJECT-TYPE    
  Counter64  

csOc3AtmCurrentIdleCells 1.3.6.1.4.1.3085.3.1.3.3.8.1.1.3
The counter indicates the number of idle cells at OC3-ATM interface
OBJECT-TYPE    
  Counter64  

csOc3AtmCurrentCorrectedHEC 1.3.6.1.4.1.3085.3.1.3.3.8.1.1.4
The counter indicates the number of corrected HEC cells at OC3-ATM interface
OBJECT-TYPE    
  Counter64  

csOc3AtmCurrentUnCorrectedHEC 1.3.6.1.4.1.3085.3.1.3.3.8.1.1.5
The counter indicates the number of uncorrected HEC cells at OC3-ATM interface
OBJECT-TYPE    
  Counter64  

csOc3AtmCurrentStatsTableEnd 1.3.6.1.4.1.3085.3.1.3.3.8.2
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOc3AtmIntervalStatsTable 1.3.6.1.4.1.3085.3.1.3.3.8.3
The OC3 ATM Interval statistics counter table.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOc3AtmIntervalStatsEntry

csOc3AtmIntervalStatsEntry 1.3.6.1.4.1.3085.3.1.3.3.8.3.1
An entry in the OC3 ATM Interval statistics counter table.
OBJECT-TYPE    
  CsOc3AtmIntervalStatsEntry  

csOc3AtmIntervalNumber 1.3.6.1.4.1.3085.3.1.3.3.8.3.1.1
A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1.
OBJECT-TYPE    
  Integer32 1..96  

csOc3AtmIntervalTransmittedCells 1.3.6.1.4.1.3085.3.1.3.3.8.3.1.2
The counter indicates the number of transmitted cells at OC3-ATM interface in a given interval number
OBJECT-TYPE    
  Counter64  

csOc3AtmIntervalRecievedCells 1.3.6.1.4.1.3085.3.1.3.3.8.3.1.3
The counter indicates the number of received cells at OC3-ATM interface in a given interval number
OBJECT-TYPE    
  Counter64  

csOc3AtmIntervalIdleCells 1.3.6.1.4.1.3085.3.1.3.3.8.3.1.4
The counter indicates the number of idle cells at OC3-ATM interface in a given interval number
OBJECT-TYPE    
  Counter64  

csOc3AtmIntervalCorrectedHEC 1.3.6.1.4.1.3085.3.1.3.3.8.3.1.5
The counter indicates the number of corrected HEC cells at OC3-ATM interface in a given interval number
OBJECT-TYPE    
  Counter64  

csOc3AtmIntervalUnCorrectedHEC 1.3.6.1.4.1.3085.3.1.3.3.8.3.1.6
The counter indicates the number of uncorrected HEC cells at OC3-ATM interface in a given interval number
OBJECT-TYPE    
  Counter64  

csOc3AtmIntervalValidData 1.3.6.1.4.1.3085.3.1.3.3.8.3.1.7
This variable indicates if the data for this interval is valid.
OBJECT-TYPE    
  TruthValue  

csOc3AtmIntervalStatsTableEnd 1.3.6.1.4.1.3085.3.1.3.3.8.4
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionFrInfo 1.3.6.1.4.1.3085.3.1.3.4
OBJECT IDENTIFIER    

csFrDlcmiTable 1.3.6.1.4.1.3085.3.1.3.4.1
The Parameters for the Data Link Connection Management Interface for the frame relay service on this interface.
OBJECT-TYPE    
  SEQUENCE OF  
    CsFrDlcmiEntry

csFrDlcmiEntry 1.3.6.1.4.1.3085.3.1.3.4.1.1
The Parameters for a particular Data Link Connection Management Interface.
OBJECT-TYPE    
  CsFrDlcmiEntry  

csFrDlcmiSlot 1.3.6.1.4.1.3085.3.1.3.4.1.1.1
This table entry configures Frame Relay Dlcmi-specific parameters for a single interface. The interface is identified by the slot its blade resides in, the physical port on that blade that contains the interface, and (if applicable) the specific DS3 channel on that port. This object is used to identify the Slot.
OBJECT-TYPE    
  Integer32 1..'7fffffff'h  

csFrDlcmiModule 1.3.6.1.4.1.3085.3.1.3.4.1.1.2
This table entry configures Frame Relay Dlcmi-specific parameters for a single interface. The interface is identified by the slot its blade resides in, the moduel, the port on that blade that contains the interface, and (if applicable) the specific DS3 channel on that port. This object is used to identify the Port.
OBJECT-TYPE    
  Integer32 1..'7fffffff'h  

csFrDlcmiPort 1.3.6.1.4.1.3085.3.1.3.4.1.1.3
This table entry configures Frame Relay Dlcmi-specific parameters for a single interface. The interface is identified by the slot its blade resides in, the physical port on that blade that contains the interface, and (if applicable) the specific DS3 channel on that port. This object is used to identify the Port.
OBJECT-TYPE    
  Integer32 1..'7fffffff'h  

csFrDlcmiChannel 1.3.6.1.4.1.3085.3.1.3.4.1.1.4
This table entry configures Frame Relay Dlcmi-specific parameters for a single interface. The interface is identified by the slot its blade resides in, the physical port on that blade that contains the interface, and (if applicable) the specific DS3 channel on that port. This object is used to identify the Channel. If there is no DS3 channel (or unchannelized), this object should have the value 0.
OBJECT-TYPE    
  Integer32 0..'7fffffff'h  

csFrDlcmiState 1.3.6.1.4.1.3085.3.1.3.4.1.1.5
This variable states which Data Link Connection Management scheme is active (and by implication, what DLCI it uses) on the Frame Relay interface.
OBJECT-TYPE    
  INTEGER noLmiConfigured(1), lmiRev1(2), ansiT1617D(3), ansiT1617B(4), itut933A(5), ansiT1617D1994(6), cisco(7)  

csFrDlcmiAddress 1.3.6.1.4.1.3085.3.1.3.4.1.1.6
This variable states which address format is in use on the Frame Relay interface.
OBJECT-TYPE    
  INTEGER q921(1), q922March90(2), q922November90(3), q922(4)  

csFrDlcmiAddressLen 1.3.6.1.4.1.3085.3.1.3.4.1.1.7
This variable states the address length in octets. In the case of Q922 format, the length indicates the entire length of the address including the control portion.
OBJECT-TYPE    
  INTEGER twoOctets(2), threeOctets(3), fourOctets(4)  

csFrDlcmiPollingInterval 1.3.6.1.4.1.3085.3.1.3.4.1.1.8
This is the number of seconds between successive status enquiry messages.
OBJECT-TYPE    
  Integer32 5..30  

csFrDlcmiFullEnquiryInterval 1.3.6.1.4.1.3085.3.1.3.4.1.1.9
Number of status enquiry intervals that pass before issuance of a full status enquiry message.
OBJECT-TYPE    
  Integer32 1..255  

csFrDlcmiErrorThreshold 1.3.6.1.4.1.3085.3.1.3.4.1.1.10
This is the maximum number of unanswered Status Enquiries the equipment shall accept before declaring the interface down.
OBJECT-TYPE    
  Integer32 1..10  

csFrDlcmiMonitoredEvents 1.3.6.1.4.1.3085.3.1.3.4.1.1.11
This is the number of status polling intervals over which the error threshold is counted. For example, if within 'MonitoredEvents' number of events the station receives 'ErrorThreshold' number of errors, the interface is marked as down.
OBJECT-TYPE    
  Integer32 1..10  

csFrDlcmiMaxSupportedVCs 1.3.6.1.4.1.3085.3.1.3.4.1.1.12
The maximum number of Virtual Circuits allowed for this interface. Usually dictated by the Frame Relay network. In response to a SET, if a value less than zero or higher than the agent's maximal capability is configured, the agent should respond badValue
OBJECT-TYPE    
  DLCI  

csFrDlcmiMulticast 1.3.6.1.4.1.3085.3.1.3.4.1.1.13
This indicates whether the Frame Relay interface is using a multicast service.
OBJECT-TYPE    
  INTEGER nonBroadcast(1), broadcast(2)  

csFrDlcmiStatus 1.3.6.1.4.1.3085.3.1.3.4.1.1.14
This indicates the status of the Frame Relay interface as determined by the performance of the dlcmi. If no dlcmi is running, the Frame Relay interface will stay in the running state indefinitely.
OBJECT-TYPE    
  INTEGER running(1), fault(2), initializing(3), up(4), down(5)  

csFrDlcmiIfType 1.3.6.1.4.1.3085.3.1.3.4.1.1.15
This indicates the type of interface.
OBJECT-TYPE    
  INTEGER dce(1), dte(2)  

csFrDlcmiBECNFlowControl 1.3.6.1.4.1.3085.3.1.3.4.1.1.16
This object enables or disables the BECN flow control.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csFrDlcmiInjectionManagement 1.3.6.1.4.1.3085.3.1.3.4.1.1.17
.
OBJECT-TYPE    
  INTEGER forced(1), buffered(2), standard(3)  

csFrDlcmiName 1.3.6.1.4.1.3085.3.1.3.4.1.1.18
.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csFrDlcmiLmiDlci 1.3.6.1.4.1.3085.3.1.3.4.1.1.19
The DLCI of the LMI for this interface.
OBJECT-TYPE    
  DLCI  

csFrDlcmiDceN392 1.3.6.1.4.1.3085.3.1.3.4.1.1.20
LMI error threshold. For DCE IF Type. This is the maximum number of unanswered unreceived Status Enquiries the equipment shall accept before declaring the interface down.
OBJECT-TYPE    
  Integer32 1..10  

csFrDlcmiDceN393 1.3.6.1.4.1.3085.3.1.3.4.1.1.21
LMI monitored event count. For DCE IF Type. This is the number of status polling intervals over which the error threshold is counted.
OBJECT-TYPE    
  Integer32 1..10  

csFrDlcmiDceT392 1.3.6.1.4.1.3085.3.1.3.4.1.1.22
LMI monitored event count. For DCE IF Type. This indicates the expected number of seconds between heartbeat polls.
OBJECT-TYPE    
  Integer32 5..30  

csFrDlcmiAsyncEnabled 1.3.6.1.4.1.3085.3.1.3.4.1.1.23
.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csFrCircuitTable 1.3.6.1.4.1.3085.3.1.3.4.2
A table containing information about specific Data Link Connections (DLC) or virtual circuits.
OBJECT-TYPE    
  SEQUENCE OF  
    CsFrCircuitEntry

csFrCircuitEntry 1.3.6.1.4.1.3085.3.1.3.4.2.1
The information regarding a single Data Link Connection. Discontinuities in the counters contained in this table are indicated by the value in csFrCircuitCreationTime.
OBJECT-TYPE    
  CsFrCircuitEntry  

csFrCircuitSubIf 1.3.6.1.4.1.3085.3.1.3.4.2.1.1
The identifier for this Frame Relay Circuit. This corresponds to the 'subinterface' entered via the CLI.
OBJECT-TYPE    
  Integer32 2..65535  

csFrCircuitDlci 1.3.6.1.4.1.3085.3.1.3.4.2.1.2
The Data Link Connection Identifier for this virtual circuit. Note, this impelemtation supports only values between 16 and 1023 (inclusive).
OBJECT-TYPE    
  DLCI  

csFrCircuitState 1.3.6.1.4.1.3085.3.1.3.4.2.1.3
Indicates whether the particular virtual circuit is operational. In the absence of a Data Link Connection Management Interface, virtual circuit entries (rows) may be created by setting virtual circuit state to 'active', or deleted by changing Circuit state to 'invalid'. Whether or not the row actually disappears is left to the implementation, so this object may actually read as 'invalid' for some arbitrary length of time. It is also legal to set the state of a virtual circuit to 'inactive' to temporarily disable a given circuit. The use of 'invalid' is deprecated in this SNMP Version 2 MIB, in favor of csFrCircuitRowStatus.
OBJECT-TYPE    
  INTEGER invalid(1), active(2), inactive(3)  

csFrCircuitReceivedFECNs 1.3.6.1.4.1.3085.3.1.3.4.2.1.4
Number of frames received from the network indicating forward congestion since the virtual circuit was created. This occurs when the remote DTE sets the FECN flag, or when a switch in the network enqueues the frame to a trunk whose transmission queue is congested.
OBJECT-TYPE    
  Counter32  

csFrCircuitReceivedBECNs 1.3.6.1.4.1.3085.3.1.3.4.2.1.5
Number of frames received from the network indicating backward congestion since the virtual circuit was created. This occurs when the remote DTE sets the BECN flag, or when a switch in the network receives the frame from a trunk whose transmission queue is congested.
OBJECT-TYPE    
  Counter32  

csFrCircuitSentFrames 1.3.6.1.4.1.3085.3.1.3.4.2.1.6
The number of frames sent from this virtual circuit since it was created.
OBJECT-TYPE    
  Counter32  

csFrCircuitSentOctets 1.3.6.1.4.1.3085.3.1.3.4.2.1.7
The number of octets sent from this virtual circuit since it was created. Octets counted are the full frame relay header and the payload, but do not include the flag characters or CRC.
OBJECT-TYPE    
  Counter32  

csFrCircuitReceivedFrames 1.3.6.1.4.1.3085.3.1.3.4.2.1.8
Number of frames received over this virtual circuit since it was created.
OBJECT-TYPE    
  Counter32  

csFrCircuitReceivedOctets 1.3.6.1.4.1.3085.3.1.3.4.2.1.9
Number of octets received over this virtual circuit since it was created. Octets counted include the full frame relay header, but do not include the flag characters or the CRC.
OBJECT-TYPE    
  Counter32  

csFrCircuitCreationTime 1.3.6.1.4.1.3085.3.1.3.4.2.1.10
The value of sysUpTime when the virtual circuit was created, whether by the Data Link Connection Management Interface or by a SetRequest.
OBJECT-TYPE    
  TimeStamp  

csFrCircuitLastTimeChange 1.3.6.1.4.1.3085.3.1.3.4.2.1.11
The value of sysUpTime when last there was a change in the virtual circuit state
OBJECT-TYPE    
  TimeStamp  

csFrCircuitCommittedBurst 1.3.6.1.4.1.3085.3.1.3.4.2.1.12
This variable indicates the maximum amount of data, in bits, that the network agrees to transfer under normal conditions, during the measurement interval.
OBJECT-TYPE    
  Integer32 0..2147483647  

csFrCircuitExcessBurst 1.3.6.1.4.1.3085.3.1.3.4.2.1.13
This variable indicates the maximum amount of uncommitted data bits that the network will attempt to deliver over the measurement interval.
OBJECT-TYPE    
  Integer32 0..2147483647  

csFrCircuitThroughput 1.3.6.1.4.1.3085.3.1.3.4.2.1.14
Throughput is the average number of 'Frame Relay Information Field' bits transferred per second across a user network interface in one direction, measured over the measurement interval. If the configured committed burst size and throughput are both non-zero, the measurement interval, T, is T=csFrCircuitCommittedBurst/csFrCircuitThroughput. If the configured committed burst size and throughput are both zero, the measurement interval, T, is T=csFrCircuitExcessBurst/ifSpeed.
OBJECT-TYPE    
  Integer32 0..2147483647  

csFrCircuitMulticast 1.3.6.1.4.1.3085.3.1.3.4.2.1.15
This indicates whether this VC is used as a unicast VC (i.e. not multicast) or the type of multicast service subscribed to
OBJECT-TYPE    
  INTEGER unicast(1), oneWay(2), twoWay(3), nWay(4)  

csFrCircuitType 1.3.6.1.4.1.3085.3.1.3.4.2.1.16
Indication of whether the VC was manually created (static), or dynamically created (dynamic) via the data link control management interface.
OBJECT-TYPE    
  INTEGER static(1), dynamic(2)  

csFrCircuitDiscards 1.3.6.1.4.1.3085.3.1.3.4.2.1.17
The number of inbound frames dropped because of format errors, or because the VC is inactive.
OBJECT-TYPE    
  Counter32  

csFrCircuitReceivedDEs 1.3.6.1.4.1.3085.3.1.3.4.2.1.18
Number of frames received from the network indicating that they were eligible for discard since the virtual circuit was created. This occurs when the remote DTE sets the DE flag, or when in remote DTE's switch detects that the frame was received as Excess Burst data.
OBJECT-TYPE    
  Counter32  

csFrCircuitSentDEs 1.3.6.1.4.1.3085.3.1.3.4.2.1.19
Number of frames sent to the network indicating that they were eligible for discard since the virtual circuit was created. This occurs when the local DTE sets the DE flag, indicating that during Network congestion situations those frames should be discarded in preference of other frames sent without the DE bit set.
OBJECT-TYPE    
  Counter32  

csFrCircuitRemoteIpAddress 1.3.6.1.4.1.3085.3.1.3.4.2.1.20
The remote IP address mapped to this VC.
OBJECT-TYPE    
  IpAddress  

csFrCircuitRowStatus 1.3.6.1.4.1.3085.3.1.3.4.2.1.21
This object is used to create a new row or modify or destroy an existing row in the manner described in the definition of the RowStatus textual convention. Writable objects in the table may be written in any RowStatus state.
OBJECT-TYPE    
  RowStatus  

csFrCircuitOperStatus 1.3.6.1.4.1.3085.3.1.3.4.2.1.22
The operational status of this circuit.
OBJECT-TYPE    
  OperStatus  

csFrCircitFwdDlciType 1.3.6.1.4.1.3085.3.1.3.4.2.1.23
Indication of whether the DLCI corresponding to the forward link of this DLCI, is a Frame Relay DLCI or Frame over IP DLCI. Depending on this the csFrCircuitFwdLink object is interpreted differently. When setting a csFrCircuitFwdLink object, this object also must be set.
OBJECT-TYPE    
  INTEGER frDlci(1), froipDlci(2)  


csFrCircuitRatePolice 1.3.6.1.4.1.3085.3.1.3.4.2.1.25
This object enables or disables ingress traffic rate-policing. Ingress rate-policing is controlled by the values configured for csFrCircuitThroughput, csFrCircuitCommitedBurst and CsFrCircuitExcessBurst. If the number of bits received in the measurement interval is less than or equal to the committed burst size, the frame is forwared for further processing. If the number of bits received in the measurement interval is greater than the commited burst size but less than the sum of commited burst size and excess burst size, the DE bit is set in the frame and then forwared for further processing. If the number of bits received in the measurement interval is greater than the sum of commited burst size and excess burst size, the frame is dropped.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csFrCircuitUpperProtocol 1.3.6.1.4.1.3085.3.1.3.4.2.1.26
This object is used to set the upper protocol. For PPP over FR this is set to 'ppp'. NOTE: This object cannot be set to 'ip'. Only when a VI is connected to this interface that it becomes 'ip'.
OBJECT-TYPE    
  INTEGER none(1), ip(2), ppp(3)  

csFrErrTable 1.3.6.1.4.1.3085.3.1.3.4.3
A table containing information about Errors on the Frame Relay interface. Discontinuities in the counters contained in this table are the same as apply to the ifEntry associated with the Interface.
OBJECT-TYPE    
  SEQUENCE OF  
    CsFrErrEntry

csFrErrEntry 1.3.6.1.4.1.3085.3.1.3.4.3.1
The error information for a single frame relay interface.
OBJECT-TYPE    
  CsFrErrEntry  

csFrErrType 1.3.6.1.4.1.3085.3.1.3.4.3.1.1
The type of error that was last seen on this interface: receiveShort: frame was not long enough to allow demultiplexing - the address field was incomplete, or for virtual circuits using Multiprotocol over Frame Relay, the protocol identifier was missing or incomplete. receiveLong: frame exceeded maximum length configured for this interface. illegalAddress: address field did not match configured format. unknownAddress: frame received on a virtual circuit which was not active or administratively disabled. dlcmiProtoErr: unspecified error occurred when attempting to interpret link maintenance frame. dlcmiUnknownIE: link maintenance frame contained an Information Element type which is not valid for the configured link maintenance protocol. dlcmiSequenceErr: link maintenance frame contained a sequence number other than the expected value. dlcmiUnknownRpt: link maintenance frame contained a Report Type Information Element whose value was not valid for the configured link maintenance protocol. noErrorSinceReset: no errors have been detected since the last cold start or warm start.
OBJECT-TYPE    
  INTEGER unknownError(1), receiveShort(2), receiveLong(3), illegalAddress(4), unknownAddress(5), dlcmiProtoErr(6), dlcmiUnknownIE(7), dlcmiSequenceErr(8), dlcmiUnknownRpt(9), noErrorSinceReset(10)  

csFrErrData 1.3.6.1.4.1.3085.3.1.3.4.3.1.2
An octet string containing as much of the error packet as possible. As a minimum, it must contain the Q.922 Address or as much as was delivered. It is desirable to include all header and demultiplexing information.
OBJECT-TYPE    
  OCTET STRING SIZE(1..1600)  

csFrErrTime 1.3.6.1.4.1.3085.3.1.3.4.3.1.3
The value of sysUpTime at which the error was detected.
OBJECT-TYPE    
  TimeStamp  

csFrErrFaults 1.3.6.1.4.1.3085.3.1.3.4.3.1.4
The number of times the interface has gone down since it was initialized.
OBJECT-TYPE    
  Counter32  

csFrErrFaultTime 1.3.6.1.4.1.3085.3.1.3.4.3.1.5
The value of sysUpTime at the time when the interface was taken down due to excessive errors. Excessive errors is defined as the time when a DLCMI exceeds the frDlcmiErrorThreshold number of errors within frDlcmiMonitoredEvents. See FrDlcmiEntry for further details.
OBJECT-TYPE    
  TimeStamp  

csFrDlcmiStatTable 1.3.6.1.4.1.3085.3.1.3.4.4
A table containing information about the statistics on every DLCMI.
OBJECT-TYPE    
  SEQUENCE OF  
    CsFrDlcmiStatEntry

csFrDlcmiStatEntry 1.3.6.1.4.1.3085.3.1.3.4.4.1
The statistics information for a single frame relay interface.
OBJECT-TYPE    
  CsFrDlcmiStatEntry  

csFrDlcmiStatStatusEnquiries 1.3.6.1.4.1.3085.3.1.3.4.4.1.1
Number of times the Status Equiry is sent.
OBJECT-TYPE    
  Counter32  

csFrDlcmiStatFullStatusEnquiries 1.3.6.1.4.1.3085.3.1.3.4.4.1.2
Number of times the Full Status Equiry is sent.
OBJECT-TYPE    
  Counter32  

csFrDlcmiStatStatusResponses 1.3.6.1.4.1.3085.3.1.3.4.4.1.3
Number of times the Status Response is received.
OBJECT-TYPE    
  Counter32  

csFrDlcmiStatFullStatusResponses 1.3.6.1.4.1.3085.3.1.3.4.4.1.4
Number of times the Full Status Response is received.
OBJECT-TYPE    
  Counter32  

csFrDlcmiStatAsyncUpdates 1.3.6.1.4.1.3085.3.1.3.4.4.1.5
Number of times the Asyn Update is made.
OBJECT-TYPE    
  Counter32  

csFrDlcmiStatUnknownMessages 1.3.6.1.4.1.3085.3.1.3.4.4.1.6
Number of times the Unknown Messages is encountered.
OBJECT-TYPE    
  Counter32  

csFrDlcmiStatLostSequences 1.3.6.1.4.1.3085.3.1.3.4.4.1.7
Number of times the Lost Sequence is encountered.
OBJECT-TYPE    
  Counter32  

csFrDlcmiStatMissingResponses 1.3.6.1.4.1.3085.3.1.3.4.4.1.8
Number of times the Missing Response is encountered.
OBJECT-TYPE    
  Counter32  

csFrDlcmiStatLocalSequenceNumber 1.3.6.1.4.1.3085.3.1.3.4.4.1.9
The local sequence number.
OBJECT-TYPE    
  Counter32  

csFrDlcmiStatNetSequenceNumber 1.3.6.1.4.1.3085.3.1.3.4.4.1.10
The network sequence number.
OBJECT-TYPE    
  Counter32  

csAtmInfo 1.3.6.1.4.1.3085.3.1.3.5
OBJECT IDENTIFIER    

csAtmInterfaceConfTable 1.3.6.1.4.1.3085.3.1.3.5.1
This table contains ATM local interface configuration parameters, one entry per ATM interface port.
OBJECT-TYPE    
  SEQUENCE OF  
    CsAtmInterfaceConfEntry

csAtmInterfaceConfEntry 1.3.6.1.4.1.3085.3.1.3.5.1.1
This list contains ATM interface configuration parameters and state variables.
OBJECT-TYPE    
  CsAtmInterfaceConfEntry  

csAtmInterfaceConfSlotIndex 1.3.6.1.4.1.3085.3.1.3.5.1.1.1
This object identifies the blade to which this ATM Port is attached. Together with csAtmInterfaceConfModuleIndex, csAtmInterfaceConfPortIndex, it uniquely identifies a physical port.
OBJECT-TYPE    
  Integer32 1..64  

csAtmInterfaceConfModuleIndex 1.3.6.1.4.1.3085.3.1.3.5.1.1.2
This object identifies the module to which this ATM Port is attached.
OBJECT-TYPE    
  Integer32 1..64  

csAtmInterfaceConfPortIndex 1.3.6.1.4.1.3085.3.1.3.5.1.1.3
This object identifies the blade to which this ATM Port is attached. Together with csAtmInterfaceConfSlotIndex, it uniquely identifies a physical port.
OBJECT-TYPE    
  Integer32 1..64  

csAtmInterfaceConfMaxVpcs 1.3.6.1.4.1.3085.3.1.3.5.1.1.4
The maximum number of VPCs (PVPCs and SVPCs) supported at this ATM interface. At the ATM UNI, the maximum number of VPCs (PVPCs and SVPCs) ranges from 0 to 256 only.
OBJECT-TYPE    
  Integer32 0..256  

csAtmInterfaceConfMaxVccs 1.3.6.1.4.1.3085.3.1.3.5.1.1.5
The maximum number of VCCs (PVCCs and SVCCs) supported at this ATM interface.
OBJECT-TYPE    
  Integer32 1..65536  

csAtmInterfaceConfVpcs 1.3.6.1.4.1.3085.3.1.3.5.1.1.6
The number of VPCs (PVPC, Soft PVPC and SVPC) currently in use at this ATM interface. It includes the number of PVPCs and Soft PVPCs that are configured at the interface, plus the number of SVPCs that are currently established at the interface. At the ATM UNI, the configured number of VPCs (PVPCs and SVPCs) can range from 0 to 256 only.
OBJECT-TYPE    
  Integer32 0..256  

csAtmInterfaceConfVccs 1.3.6.1.4.1.3085.3.1.3.5.1.1.7
The number of VCCs (PVCC, Soft PVCC and SVCC) currently in use at this ATM interface. It includes the number of PVCCs and Soft PVCCs that are configured at the interface, plus the number of SVCCs that are currently established at the interface.
OBJECT-TYPE    
  Integer32 1..65536  

csAtmInterfaceConfMaxActiveVpiBits 1.3.6.1.4.1.3085.3.1.3.5.1.1.8
The maximum number of active VPI bits configured for use at the ATM interface. At the ATM UNI, the maximum number of active VPI bits configured for use ranges from 0 to 8 only.
OBJECT-TYPE    
  Integer32 0..16  

csAtmInterfaceConfCurrentMaxVpiBits 1.3.6.1.4.1.3085.3.1.3.5.1.1.9
The maximum number of VPI Bits that may currently be used at this ATM interface. The value is the minimum of AtmInterfaceMaxActiveVpiBits, and the AtmInterfaceMaxActiveVpiBits of the interface's UNI/NNI peer. If the interface does not negotiate with its peer to determine the number of VPI Bits that can be used on the interface, then the value of this object must equal AtmInterfaceMaxActiveVpiBits.
OBJECT-TYPE    
  Integer32 0..16  

csAtmInterfaceConfMaxActiveVciBits 1.3.6.1.4.1.3085.3.1.3.5.1.1.10
The maximum number of active VCI bits configured for use at this ATM interface.
OBJECT-TYPE    
  Integer32 0..16  

csAtmInterfaceConfCurrentMaxVciBits 1.3.6.1.4.1.3085.3.1.3.5.1.1.11
The maximum number of VCI Bits that may currently be used at this ATM interface. The value is the minimum of AtmInterfaceMaxActiveVciBits, and the AtmInterfaceMaxActiveVciBits of the interface's UNI/NNI peer. If the interface does not negotiate with its peer to determine the number of VCI Bits that can be used on the interface, then the value of this object must equal AtmInterfaceMaxActiveVciBits.
OBJECT-TYPE    
  Integer32 0..16  

csAtmInterfaceConfIlmiVpi 1.3.6.1.4.1.3085.3.1.3.5.1.1.12
The VPI value of the VCC supporting the ILMI at this ATM interface. If the values of AtmInterfaceIlmiVpi and AtmInterfaceIlmiVci are both equal to zero then the ILMI is not supported at this ATM interface.
OBJECT-TYPE    
  AtmVpIdentifier  

csAtmInterfaceConfIlmiVci 1.3.6.1.4.1.3085.3.1.3.5.1.1.13
The VCI value of the VCC supporting the ILMI at this ATM interface. If the values of AtmInterfaceIlmiVpi and AtmInterfaceIlmiVci are both equal to zero then the ILMI is not supported at this ATM interface.
OBJECT-TYPE    
  AtmVcIdentifier  

csAtmInterfaceConfMyIfName 1.3.6.1.4.1.3085.3.1.3.5.1.1.14
A textual name of this interface. if this system is manageable through SNMP, and supports the object ifName, the value of this object must be identical with that of ifName for the ifEntry of the lowest level physical interface for this port. This interface must be uniquely named on this system to distinguish parallel links with a neighboring system. if this interface does not have a textual name, the value of this object is a zero length strin.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

csAtmInterfaceConfMyNeighbourIpAddress 1.3.6.1.4.1.3085.3.1.3.5.1.1.15
The IP address of the neighbor system connected to the far end of this interface, to which a Network Management Station can send SNMP messages, as IP datagrams sent to UDP port 161, in order to access network management information concerning the operation of that system. Note that the value of this object may be obtained in different ways, e.g., by manual configuration, or through ILMI interaction with the neighbor system.
OBJECT-TYPE    
  IpAddress  

csAtmInterfaceConfMyNeighbourIfName 1.3.6.1.4.1.3085.3.1.3.5.1.1.16
The textual name of the interface on the neighbor system on the far end of this interface, and to which this interface connects. If the neighbor system is manageable through SNMP and supports the object ifName, the value of this object must be identical with that of ifName for the ifEntry of the lowest level physical interface for this port. If this interface does not have a textual name, the value of this object is a zero length string. Note that the value of this object may be obtained in different ways, e.g., by manual configuration, or through ILMI interaction with the neighbor system.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

csAtmInterfaceConfIlmiVersion 1.3.6.1.4.1.3085.3.1.3.5.1.1.17
An indication of the latest version of the ATM Forum ILMI specification that is supported on this ATM interface. If the peer IME's value of this object is the same as, or later than the local IME's value, then the version corresponding to the local IME's value should be attempted. Otherwise, if the peer IME's value of this object is earlier, and supported locally, then the local IME should attempt the version corresponding to the peer IME's value. Otherwise, compatibility of the two IMEs cannot be assumed. If this object is not present, a version of the ILMI earlier than 4.0 is supported.
OBJECT-TYPE    
  INTEGER unsupported(1), version4point0(2)  

csAtmInterfaceConfUniType 1.3.6.1.4.1.3085.3.1.3.5.1.1.18
The type of the ATM device, either public or private.
OBJECT-TYPE    
  INTEGER public(1), private(2)  

csAtmInterfaceConfUniVersion 1.3.6.1.4.1.3085.3.1.3.5.1.1.19
An indication of the latest version of the ATM Forum UNI Signalling Specification that is supported on this ATM Interface. if this value is not present, a version of the UNI earlier than 3.1 is supported. If the peer IME's value of this object is the same as, or earlier than the local IME's value, then the version corresponding to the local IME's value should be attempted. Otherwise, if the peer IME's value of this object is earlier, and supported locally, then the local IME should attempt the version corresponding to the peer IME's value. Otherwise compatibility of the two IMEs cannot be assumed.
OBJECT-TYPE    
  INTEGER version2point0(1), version3point0(2), version3point1(3), version4point0(4), unsupported(5)  

csAtmInterfaceConfAdminStatus 1.3.6.1.4.1.3085.3.1.3.5.1.1.20
The object used to enable/disable this ATM interface.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csAtmInterfaceConfOperStatus 1.3.6.1.4.1.3085.3.1.3.5.1.1.21
The operational status of this ATM interface.
OBJECT-TYPE    
  OperStatus  

csAtmInterfaceConfIlmiControl 1.3.6.1.4.1.3085.3.1.3.5.1.1.22
The object is used to enable/disable the ILMI on this ATM interface.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csAtmInterfaceConfIlmiStatus 1.3.6.1.4.1.3085.3.1.3.5.1.1.23
The object is used to monitor the status of the ILMI on this ATM interface.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

csAtmInterfaceConfEvLogLevel 1.3.6.1.4.1.3085.3.1.3.5.1.1.24
This object is used to set the level for details for event logs for ATM port. This value will not be applied to VCCs. Events with level higher than this object will not be logged.
OBJECT-TYPE    
  EvLogLevel  

csAtmInterfaceConfEvLogArea 1.3.6.1.4.1.3085.3.1.3.5.1.1.25
This object is used to set the area of event logs for ATM Port. This value will not be applied to VCCs. Events which area is not specified in this object will not be logged.
OBJECT-TYPE    
  EvLogArea  

csAtmConnTable 1.3.6.1.4.1.3085.3.1.3.5.2
This table can be used to creata virtual connections in this ATM interface.
OBJECT-TYPE    
  SEQUENCE OF  
    CsAtmConnEntry

csAtmConnEntry 1.3.6.1.4.1.3085.3.1.3.5.2.1
This list contains ATM virtual connections.
OBJECT-TYPE    
  CsAtmConnEntry  

csAtmConnChannelIndex 1.3.6.1.4.1.3085.3.1.3.5.2.1.1
Channel ID of this ATM connection. Currently, it will always be 0.
OBJECT-TYPE    
  Integer32 0..64  

csAtmConnSubIfIndex 1.3.6.1.4.1.3085.3.1.3.5.2.1.2
The identifier for this ATM connection. This corresponds to the 'subinterface' entered via the CLI.
OBJECT-TYPE    
  Integer32 1..2147483647  

csAtmConnVpi 1.3.6.1.4.1.3085.3.1.3.5.2.1.3
Virtual Path ID of this connection. This is mandatory in creating a connection.
OBJECT-TYPE    
  AtmVpIdentifier  

csAtmConnVci 1.3.6.1.4.1.3085.3.1.3.5.2.1.4
Virtual Channel ID of this connection. This is mandatory in creating a connection.
OBJECT-TYPE    
  AtmVcIdentifier  

csAtmConnType 1.3.6.1.4.1.3085.3.1.3.5.2.1.5
The ATM service category. NOTE : The type other(1) is not implemented for write operation. Setting to this type will default to ubr(6).
OBJECT-TYPE    
  AtmServiceCategory  

csAtmConnPvcType 1.3.6.1.4.1.3085.3.1.3.5.2.1.6
OBJECT-TYPE    
  INTEGER pvpc(1), pvcc(2)  

csAtmConnPCR 1.3.6.1.4.1.3085.3.1.3.5.2.1.7
Peak Cell rate for the connection.
OBJECT-TYPE    
  Integer32 0..'7fffffff'h  

csAtmConnSCR 1.3.6.1.4.1.3085.3.1.3.5.2.1.8
Sustain Cell rate for the connection. NOTE: This value is applicable for VBR service categories.
OBJECT-TYPE    
  Integer32 0..'7fffffff'h  

csAtmConnMBS 1.3.6.1.4.1.3085.3.1.3.5.2.1.9
Maximum Burst Size for the connection. NOTE: This value is applicable for VBR service categories.
OBJECT-TYPE    
  Integer32 0..'7fffffff'h  

csAtmConnICR 1.3.6.1.4.1.3085.3.1.3.5.2.1.10
Inital Cell rate for the connection. NOTE: This value is applicable for ABR service category.
OBJECT-TYPE    
  Integer32 0..'7fffffff'h  

csAtmConnMCR 1.3.6.1.4.1.3085.3.1.3.5.2.1.11
Minimum Cell rate for the connection. NOTE: This value is applicable for ABR service category.
OBJECT-TYPE    
  Integer32 0..'7fffffff'h  

csAtmConnOamLoopback 1.3.6.1.4.1.3085.3.1.3.5.2.1.12
This object is used to enable/disable the loopback.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csAtmConnOamContinuity 1.3.6.1.4.1.3085.3.1.3.5.2.1.13
This object is used to enable/disable the continuity.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csAtmConnAal5CpcsTransmitSduSize 1.3.6.1.4.1.3085.3.1.3.5.2.1.14
An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 is in use. The maximum AAL5 CPCS SDU size in octets that is supported on the transmit direction of this VCC. NOTE : For now, a maximum of 1744 is supported.
OBJECT-TYPE    
  Integer32 1..65535  

csAtmConnAal5CpcsReceiveSduSize 1.3.6.1.4.1.3085.3.1.3.5.2.1.15
An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 is in use. The maximum AAL5 CPCS SDU size in octets that is supported on the receive direction of this VCC.
OBJECT-TYPE    
  Integer32 1..65535  

csAtmConnEncapType 1.3.6.1.4.1.3085.3.1.3.5.2.1.16
The use of call control.
OBJECT-TYPE    
  INTEGER unknown(1), llcRoutedEncapsulation(2), vcMultiplexRoutedProtocol(3), llcBridgedEncapsulation(4), vcMultiplexedBridged802dot3(5)  

csAtmConnKind 1.3.6.1.4.1.3085.3.1.3.5.2.1.17
The use of call control.
OBJECT-TYPE    
  INTEGER pvc(1), svc(2), spvc(3)  

csAtmConnAdminStatus 1.3.6.1.4.1.3085.3.1.3.5.2.1.18
This object is instanciated only for a connection which terminates a VCC (i.e., one which is NOT cross-connected to other connections). Its value specifies the desired administrative state of the connection.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csAtmConnOperStatus 1.3.6.1.4.1.3085.3.1.3.5.2.1.19
The current operational status of the connection.
OBJECT-TYPE    
  OperStatus  

csAtmConnRowStatus 1.3.6.1.4.1.3085.3.1.3.5.2.1.20
This object is used to create, delete or modify a row in this table.
OBJECT-TYPE    
  RowStatus  

csAtmConnUpperProtocol 1.3.6.1.4.1.3085.3.1.3.5.2.1.21
This object is used to set the upper protocol. For PPP over ATM this is set to 'ppp'. For PPP over Ethernet this is set to 'pppoe'. NOTE: This object cannot be set to 'ip'. Only when a VI is connected to this interface that it becomes 'ip'.
OBJECT-TYPE    
  INTEGER none(1), ip(2), ppp(3), pppoe(4)  

csAtmConnArpAgingTime 1.3.6.1.4.1.3085.3.1.3.5.2.1.22
An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 Encapsulation type supports Bridging format. This objects specifies aging time (in minutes) for ARP Cache entries and it takes effect when ATM ARP module restarts.
OBJECT-TYPE    
  Integer32 6..60  

csAtmConnArpCacheSize 1.3.6.1.4.1.3085.3.1.3.5.2.1.23
An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 Encapsulation type supports Bridging format. This objects specifies the size of ARP Cache and it takes effect when ATM ARP module restarts.
OBJECT-TYPE    
  Integer32 8..64  

csAtmConnEthernetMacAddress 1.3.6.1.4.1.3085.3.1.3.5.2.1.24
An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 Encapsulation type supports Bridging format. This objects specifies the active MAC Address on the VCC end-point.
OBJECT-TYPE    
  MacAddress  

csAtmConnEvLogLevel 1.3.6.1.4.1.3085.3.1.3.5.2.1.25
This object is used to set the level for details for event logs forATM VCC. Events with level higher than this object will not be logged.
OBJECT-TYPE    
  EvLogLevel  

csAtmConnEvLogArea 1.3.6.1.4.1.3085.3.1.3.5.2.1.26
This object is used to set the area of event logs for ATM VCC. Events which area is not specified in this object will not be logged.
OBJECT-TYPE    
  EvLogArea  

csAtmConnInArpAgingTime 1.3.6.1.4.1.3085.3.1.3.5.2.1.27
An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 Encapsulation type supports LLC-SNAP format. This objects specifies aging time (in minutes) for InARP entries and it takes effect immediately. Also this object is active when IP protocol is enabled on VC
OBJECT-TYPE    
  Integer32 10..60  

csAtmConnInArpManageVc 1.3.6.1.4.1.3085.3.1.3.5.2.1.28
An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 Encapsulation type supports LLC-SNAP format. This objects specifies whether PVC services to layer 3 is managed by InArp status in addition to PVC opertional status and it takes immediate effect . Also this object is active when IP protocol is enabled on VC
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csAtmConnInArpManageStatus 1.3.6.1.4.1.3085.3.1.3.5.2.1.29
An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 Encapsulation type supports LLC-SNAP format. This objects specifies the PVC InARP status and thus will be used to control services to l3, when AtmConnInArpManageVc is enabled. Also this object is meaning full when IP protocol is enabled on VC
OBJECT-TYPE    
  INTEGER up(1), down(2), none(3)  

csAtmConnInArpAdminStatus 1.3.6.1.4.1.3085.3.1.3.5.2.1.30
An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 Encapsulation type supports LLC-SNAP format. This objects specifies whether InARP services can be enabled or disbaled. Operation on this object takes immediate effect. Also this object is active when IP protocol is enabled on VC
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csAtmConnOamLoopbackRetryPvcUpCount 1.3.6.1.4.1.3085.3.1.3.5.2.1.31
OAM retry count before declaring the PVC up.
OBJECT-TYPE    
  Integer32 1..16  

csAtmConnOamLoopbackRetryPvcUpRetryDelay 1.3.6.1.4.1.3085.3.1.3.5.2.1.32
OAM retry Frequency in seconds.
OBJECT-TYPE    
  Integer32 5..60  

csAtmConnOamLoopbackRetryPvcUpAge 1.3.6.1.4.1.3085.3.1.3.5.2.1.33
OAM Time to wait before transmitting OAM requests for UP status(in minutes)
OBJECT-TYPE    
  Integer32 2..1440  

csAtmConnOamLoopbackRetryPvcDownCount 1.3.6.1.4.1.3085.3.1.3.5.2.1.34
OAM retry count before declaring the PVC down.
OBJECT-TYPE    
  Integer32 1..16  

csAtmConnOamLoopbackRetryPvcDownRetryDelay 1.3.6.1.4.1.3085.3.1.3.5.2.1.35
OAM retry Frequency in seconds (for down status).
OBJECT-TYPE    
  Integer32 5..60  

csAtmConnOamLoopbackRetryPvcDownAge 1.3.6.1.4.1.3085.3.1.3.5.2.1.36
OAM Time to wait before transmitting OAM requests (in minutes)
OBJECT-TYPE    
  Integer32 2..1440  

csAtmConnOamLoopbackManageVc 1.3.6.1.4.1.3085.3.1.3.5.2.1.37
This object is used to enable/disable the oam loopback manage vc.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csAtmConnOamLoopbackStatus 1.3.6.1.4.1.3085.3.1.3.5.2.1.38
The current loopback status of the connection.
OBJECT-TYPE    
  INTEGER up(1), down(2), none(3)  

csAtmConnDynamicArpCacheTable 1.3.6.1.4.1.3085.3.1.3.5.3
OBJECT-TYPE    
  SEQUENCE OF  
    CsAtmConnDynamicArpCacheEntry

csAtmConnDynamicArpCacheEntry 1.3.6.1.4.1.3085.3.1.3.5.3.1
This list contains Dynamic ARP Entries for ATM virtual connections.
OBJECT-TYPE    
  CsAtmConnDynamicArpCacheEntry  

csAtmConnDynamicArpCacheIpAddress 1.3.6.1.4.1.3085.3.1.3.5.3.1.1
This object holds IP address associated with MAC Address.
OBJECT-TYPE    
  IpAddress  

csAtmConnDynamicArpCacheMacAddress 1.3.6.1.4.1.3085.3.1.3.5.3.1.2
This object holds MAC address associated with IP Address.
OBJECT-TYPE    
  MacAddress  

csAtmConnDynamicArpCacheRowStatus 1.3.6.1.4.1.3085.3.1.3.5.3.1.3
This object is used to delete a row in this table.
OBJECT-TYPE    
  RowStatus  

csAtmConnStaticArpCacheTable 1.3.6.1.4.1.3085.3.1.3.5.4
OBJECT-TYPE    
  SEQUENCE OF  
    CsAtmConnStaticArpCacheEntry

csAtmConnStaticArpCacheEntry 1.3.6.1.4.1.3085.3.1.3.5.4.1
This list contains Static (configured) ARP Entries for ATM virtual connections.
OBJECT-TYPE    
  CsAtmConnStaticArpCacheEntry  

csAtmConnStaticArpCacheIpAddress 1.3.6.1.4.1.3085.3.1.3.5.4.1.1
This object holds IP address associated with MAC Address.
OBJECT-TYPE    
  IpAddress  

csAtmConnStaticArpCacheMacAddress 1.3.6.1.4.1.3085.3.1.3.5.4.1.2
This object holds MAC address associated with IP Address.
OBJECT-TYPE    
  MacAddress  

csAtmConnStaticArpCacheRowStatus 1.3.6.1.4.1.3085.3.1.3.5.4.1.3
This object is used to create, delete or modify a row in this table.
OBJECT-TYPE    
  RowStatus  

csAtmConnIpAddressTable 1.3.6.1.4.1.3085.3.1.3.5.5
OBJECT-TYPE    
  SEQUENCE OF  
    CsAtmConnIpAddressEntry

csAtmConnIpAddressEntry 1.3.6.1.4.1.3085.3.1.3.5.5.1
This list contains ARP Entries for ATM virtual connections.
OBJECT-TYPE    
  CsAtmConnIpAddressEntry  

csAtmConnIpAddressIpAddress 1.3.6.1.4.1.3085.3.1.3.5.5.1.1
This object holds IP address for which ATM ARP module responds positively.
OBJECT-TYPE    
  IpAddress  

csAtmConnIpAddressRowStatus 1.3.6.1.4.1.3085.3.1.3.5.5.1.2
This object is used to create, delete or modify a row in this table.
OBJECT-TYPE    
  RowStatus  

csAtmConnIpAddressType 1.3.6.1.4.1.3085.3.1.3.5.5.1.3
This object specifies the type of IP address, i.e.,NON-PROXY-IP, or PROXY IP.
OBJECT-TYPE    
  INTEGER nonProxyIp(1), proxyIp(2), none(3)  

csAtmConnIpAddressTableEnd 1.3.6.1.4.1.3085.3.1.3.5.6
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csAtmInterfaceConfStatsTable 1.3.6.1.4.1.3085.3.1.3.5.7
OBJECT-TYPE    
  SEQUENCE OF  
    CsAtmInterfaceConfStatsEntry

csAtmInterfaceConfStatsEntry 1.3.6.1.4.1.3085.3.1.3.5.7.1
This list contains statistics entries for ATM interfaces.
OBJECT-TYPE    
  CsAtmInterfaceConfStatsEntry  

csAtmInterfaceConfTransmittedPackets 1.3.6.1.4.1.3085.3.1.3.5.7.1.1
The counter indicates the number of packets transmitted on ATM interface
OBJECT-TYPE    
  Counter64  

csAtmInterfaceConfTransmittedBytes 1.3.6.1.4.1.3085.3.1.3.5.7.1.2
The counter indicates the number of bytes transmitted on ATM interface
OBJECT-TYPE    
  Counter64  

csAtmInterfaceConfTransmitErrors 1.3.6.1.4.1.3085.3.1.3.5.7.1.3
The counter indicates the number of packets dropped due to transmit path errors on ATM interface caused by buffer operation failures, and invalid protocol types
OBJECT-TYPE    
  Counter64  

csAtmInterfaceConfTransmitOperationallyDown 1.3.6.1.4.1.3085.3.1.3.5.7.1.4
The counter indicates the number of packets dropped in transmit path on ATM interface, because of inactive PVCs
OBJECT-TYPE    
  Counter64  

csAtmInterfaceConfTransmitQueueFull 1.3.6.1.4.1.3085.3.1.3.5.7.1.5
The counter indicates the number of packets dropped due to transmit queue is full on driver interface
OBJECT-TYPE    
  Counter64  

csAtmInterfaceConfTransmitBadLength 1.3.6.1.4.1.3085.3.1.3.5.7.1.6
The counter indicates the number of packets dropped in transmit path due to bad length on driver interface
OBJECT-TYPE    
  Counter64  

csAtmInterfaceConfTransmitIncomplete 1.3.6.1.4.1.3085.3.1.3.5.7.1.7
The counter indicates the number of packets transmitted incompletely on driver interface
OBJECT-TYPE    
  Counter64  

csAtmInterfaceConfTransmitVcNotOpened 1.3.6.1.4.1.3085.3.1.3.5.7.1.8
The counter indicates the number of packets dropped in transmit path due to non-existing VCCs on driver interface
OBJECT-TYPE    
  Counter64  

csAtmInterfaceConfReceivedPackets 1.3.6.1.4.1.3085.3.1.3.5.7.1.9
The counter indicates the number of packets Received on ATM interface
OBJECT-TYPE    
  Counter64  

csAtmInterfaceConfReceivedBytes 1.3.6.1.4.1.3085.3.1.3.5.7.1.10
The counter indicates the number of bytes Received on ATM interface
OBJECT-TYPE    
  Counter64  

csAtmInterfaceConfReceivedEncapsulationErrors 1.3.6.1.4.1.3085.3.1.3.5.7.1.11
The counter indicates the number of packets dropped due to LLC/SNAP errors in Receive path on ATM interface
OBJECT-TYPE    
  Counter64  

csAtmInterfaceConfReceivedUnknownProtocolErrors 1.3.6.1.4.1.3085.3.1.3.5.7.1.12
The counter indicates the number of packets dropped due to unknown protocols errors in Receive path on ATM interface
OBJECT-TYPE    
  Counter64  

csAtmInterfaceConfReceivedGenericErrors 1.3.6.1.4.1.3085.3.1.3.5.7.1.13
The counter indicates the number of packets dropped due to Receive path errors on ATM interface
OBJECT-TYPE    
  Counter64  

csAtmInterfaceConfReceivedOperationallyDown 1.3.6.1.4.1.3085.3.1.3.5.7.1.14
The counter indicates the number of packets dropped in Receive path on ATM interface, because of inactive PVCs
OBJECT-TYPE    
  Counter64  

csAtmInterfaceConfReceivedDroppedPkts 1.3.6.1.4.1.3085.3.1.3.5.7.1.15
The counter indicates the number of received packets dropped due to buffer allocation on Driver interface
OBJECT-TYPE    
  Counter64  

csAtmInterfaceConfReceivedBufferAllocationFail 1.3.6.1.4.1.3085.3.1.3.5.7.1.16
The counter indicates the number of received packets dropped due to buffer allocation on Driver interface
OBJECT-TYPE    
  Counter64  

csAtmInterfaceConfReceivedBadVc 1.3.6.1.4.1.3085.3.1.3.5.7.1.17
The counter indicates the number of received packets dropped due to non-existing VCs on Driver interface
OBJECT-TYPE    
  Counter64  

csAtmInterfaceConfReceivedBadAalType 1.3.6.1.4.1.3085.3.1.3.5.7.1.18
The counter indicates the number of received packets dropped due to unsupported AAL type on Driver interface
OBJECT-TYPE    
  Counter64  

csAtmInterfaceConfReceivedBadAalLength 1.3.6.1.4.1.3085.3.1.3.5.7.1.19
The counter indicates the number of received packets dropped due to bad PDU length on Driver interface
OBJECT-TYPE    
  Counter64  

csAtmInterfaceConfReceivedCRCErrors 1.3.6.1.4.1.3085.3.1.3.5.7.1.20
The counter indicates the number of received packets dropped due to CRC errors on Driver interface
OBJECT-TYPE    
  Counter64  

csAtmInterfaceConfReceivedDroppedCells 1.3.6.1.4.1.3085.3.1.3.5.7.1.21
The counter indicates the number of cells dropped on Driver interface
OBJECT-TYPE    
  Counter64  

csAtmInterfaceConfReceivedInvalidVpiVciCells 1.3.6.1.4.1.3085.3.1.3.5.7.1.22
The counter indicates the number of received cells dropped due to invalid VPI/VCI values on Driver interface
OBJECT-TYPE    
  Counter64  

csAtmInterfaceConfTransmittedOamLoopBackRequests 1.3.6.1.4.1.3085.3.1.3.5.7.1.23
The counter indicates the number of OAM loop-back requests transmitted on ATM interface
OBJECT-TYPE    
  Counter64  

csAtmInterfaceConfReceivedOamLoopBackResponses 1.3.6.1.4.1.3085.3.1.3.5.7.1.24
The counter indicates the number of OAM loop-back responses received on ATM interface
OBJECT-TYPE    
  Counter64  

csAtmInterfaceConfRespondedOAMLoopBackRequests 1.3.6.1.4.1.3085.3.1.3.5.7.1.25
The counter indicates the number of responded OAM loop-back requests on driver interface
OBJECT-TYPE    
  Counter64  

csAtmInterfaceConfOamLoopBackTransmitFail 1.3.6.1.4.1.3085.3.1.3.5.7.1.26
The counter indicates the number of OAM loop-back requests/responses failed to transmit on ATM/driver interface
OBJECT-TYPE    
  Counter64  

csAtmInterfaceConfTransmitCollisions 1.3.6.1.4.1.3085.3.1.3.5.7.1.27
The counter indicates the number of packets (data and OAM) aborted due collisions at driver interface
OBJECT-TYPE    
  Counter64  

csAtmInterfaceConfTransmittedCells 1.3.6.1.4.1.3085.3.1.3.5.7.1.28
The counter indicates the number of total number of cells transmitted on driver interface
OBJECT-TYPE    
  Counter64  

csAtmInterfaceReceivedBadAAL5HdrTrailers 1.3.6.1.4.1.3085.3.1.3.5.7.1.29
The counter indicates the number of packets (OAM & data) failed in reassemble path in ATM/driver interface due bad AAL5 trailer length
OBJECT-TYPE    
  Counter64  

csAtmInterfaceReceivedCells 1.3.6.1.4.1.3085.3.1.3.5.7.1.30
The counter indicates the total number of received on open channels at ATM/driver interface
OBJECT-TYPE    
  Counter64  

csAtmInterfaceConfStatsTableEnd 1.3.6.1.4.1.3085.3.1.3.5.8
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csAtmConnStatsTable 1.3.6.1.4.1.3085.3.1.3.5.9
OBJECT-TYPE    
  SEQUENCE OF  
    CsAtmConnStatsEntry

csAtmConnStatsEntry 1.3.6.1.4.1.3085.3.1.3.5.9.1
This list contains statistics entries for ATM interfaces.
OBJECT-TYPE    
  CsAtmConnStatsEntry  

csAtmConnTransmittedPackets 1.3.6.1.4.1.3085.3.1.3.5.9.1.1
The counter indicates the number of packets transmitted on ATM VC
OBJECT-TYPE    
  Counter64  

csAtmConnTransmittedBytes 1.3.6.1.4.1.3085.3.1.3.5.9.1.2
The counter indicates the number of bytes transmitted on ATM VC
OBJECT-TYPE    
  Counter64  

csAtmConnTransmitErrors 1.3.6.1.4.1.3085.3.1.3.5.9.1.3
The counter indicates the number of packets dropped due to transmit path errors on ATM VC
OBJECT-TYPE    
  Counter64  

csAtmConnTransmitOperationallyDown 1.3.6.1.4.1.3085.3.1.3.5.9.1.4
The counter indicates the number of packets dropped in transmit path on ATM VC, because of inactivity
OBJECT-TYPE    
  Counter64  

csAtmConnTransmitQueueFull 1.3.6.1.4.1.3085.3.1.3.5.9.1.5
The counter indicates the number of packets dropped due to transmit queue is full on driver interface
OBJECT-TYPE    
  Counter64  

csAtmConnTransmitBadLength 1.3.6.1.4.1.3085.3.1.3.5.9.1.6
The counter indicates the number of packets dropped in transmit path due to bad length on driver interface
OBJECT-TYPE    
  Counter64  

csAtmConnReceivedPackets 1.3.6.1.4.1.3085.3.1.3.5.9.1.7
The counter indicates the number of packets Received on ATM VC
OBJECT-TYPE    
  Counter64  

csAtmConnReceivedBytes 1.3.6.1.4.1.3085.3.1.3.5.9.1.8
The counter indicates the number of bytes Received on ATM VC
OBJECT-TYPE    
  Counter64  

csAtmConnReceivedEncapsulationErrors 1.3.6.1.4.1.3085.3.1.3.5.9.1.9
The counter indicates the number of packets dropped due to encapsulation errors in Receive path errors on ATM VC
OBJECT-TYPE    
  Counter64  

csAtmConnReceivedUnknownProtocolErrors 1.3.6.1.4.1.3085.3.1.3.5.9.1.10
The counter indicates the number of packets dropped due to unknown protocol in r eceive path errors on ATM VC
OBJECT-TYPE    
  Counter64  

csAtmConnReceivedGenericErrors 1.3.6.1.4.1.3085.3.1.3.5.9.1.11
The counter indicates the number of packets dropped due to Receive path generic errors on ATM VC. These errors includes, when protocol is none, or any other operations failed while accessing LLC/SNAP header
OBJECT-TYPE    
  Counter64  

csAtmConnReceivedOperationallyDown 1.3.6.1.4.1.3085.3.1.3.5.9.1.12
The counter indicates the number of packets dropped in Receive path on ATM VC, because of inactivity
OBJECT-TYPE    
  Counter64  

csAtmConnReceivedDroppedPkts 1.3.6.1.4.1.3085.3.1.3.5.9.1.13
The counter indicates the number of received packets dropped due to buffer allocation on Driver interface
OBJECT-TYPE    
  Counter64  

csAtmConnReceivedBufferAllocationFail 1.3.6.1.4.1.3085.3.1.3.5.9.1.14
The counter indicates the number of received packets dropped due to buffer allocation on Driver interface
OBJECT-TYPE    
  Counter64  

csAtmConnReceivedBadAalType 1.3.6.1.4.1.3085.3.1.3.5.9.1.15
The counter indicates the number of received packets dropped due to unsupported AAL type on Driver interface
OBJECT-TYPE    
  Counter64  

csAtmConnReceivedBadAalLength 1.3.6.1.4.1.3085.3.1.3.5.9.1.16
The counter indicates the number of received packets dropped due to bad PDU length on Driver interface
OBJECT-TYPE    
  Counter64  

csAtmConnReceivedCRCErrors 1.3.6.1.4.1.3085.3.1.3.5.9.1.17
The counter indicates the number of received packets dropped due to CRC errors on Driver interface
OBJECT-TYPE    
  Counter64  

csAtmConnTransmittedOamLoopBackRequests 1.3.6.1.4.1.3085.3.1.3.5.9.1.18
The counter indicates the number of OAM loop-back requests transmitted on ATM VC
OBJECT-TYPE    
  Counter64  

csAtmConnReceivedOamLoopBackResponses 1.3.6.1.4.1.3085.3.1.3.5.9.1.19
The counter indicates the number of OAM loop-back responses received on ATM VC
OBJECT-TYPE    
  Counter64  

csAtmConnRespondedOAMLoopBackRequests 1.3.6.1.4.1.3085.3.1.3.5.9.1.20
The counter indicates the number of responded OAM loop-back requests on driver interface
OBJECT-TYPE    
  Counter64  

csAtmConnOamLoopBackTransmitFail 1.3.6.1.4.1.3085.3.1.3.5.9.1.21
The counter indicates the number of OAM loop-back requests failed to transmit on ATM VC
OBJECT-TYPE    
  Counter64  

csAtmConnTransmittedArpRequests 1.3.6.1.4.1.3085.3.1.3.5.9.1.22
The counter indicates the number of transmitted ARP requests on ATM VC
OBJECT-TYPE    
  Counter64  

csAtmConnTransmittedArpResponses 1.3.6.1.4.1.3085.3.1.3.5.9.1.23
The counter indicates the number of transmitted ARP responses on ATM VC
OBJECT-TYPE    
  Counter64  

csAtmConnReceivedArpRequests 1.3.6.1.4.1.3085.3.1.3.5.9.1.24
The counter indicates the number of received ARP requests on ATM VC
OBJECT-TYPE    
  Counter64  

csAtmConnReceivedArpResponses 1.3.6.1.4.1.3085.3.1.3.5.9.1.25
The counter indicates the number of received ARP responses on ATM VC
OBJECT-TYPE    
  Counter64  

csAtmConnUnRespondedArpRequests 1.3.6.1.4.1.3085.3.1.3.5.9.1.26
The counter indicates the number of received ARP requests for which, no ARP responses send due to non-existing IP address on ATM VC
OBJECT-TYPE    
  Counter64  

csAtmConnArpErrors 1.3.6.1.4.1.3085.3.1.3.5.9.1.27
The counter indicates the number of ARP requests/responses failed due other reasons, on ATM VC
OBJECT-TYPE    
  Counter64  

csAtmConnTransmittedCells 1.3.6.1.4.1.3085.3.1.3.5.9.1.28
The counter indicates the total number of data cells transmitted on ATM VC
OBJECT-TYPE    
  Counter64  

csAtmConnTransmitDroppedPkts 1.3.6.1.4.1.3085.3.1.3.5.9.1.29
The counter indicates the total number of packets (OAM/RAW/data) packets dropped or aborted on ATM VC
OBJECT-TYPE    
  Counter64  

csAtmConnReceivedCells 1.3.6.1.4.1.3085.3.1.3.5.9.1.30
The counter indicates the total number of cells received on ATM VC
OBJECT-TYPE    
  Counter64  

csAtmConnStatsTableEnd 1.3.6.1.4.1.3085.3.1.3.5.10
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csAtmConnInArpStatisticsTable 1.3.6.1.4.1.3085.3.1.3.5.11
OBJECT-TYPE    
  SEQUENCE OF  
    CsAtmConnInArpStatisticsEntry

csAtmConnInArpStatisticsEntry 1.3.6.1.4.1.3085.3.1.3.5.11.1
This list contains ARP Entries for ATM virtual connections.
OBJECT-TYPE    
  CsAtmConnInArpStatisticsEntry  

csAtmConnInArpInReqs 1.3.6.1.4.1.3085.3.1.3.5.11.1.1
The number of InATMARP requests received on the PVC.
OBJECT-TYPE    
  Counter64  

csAtmConnInArpOutReqs 1.3.6.1.4.1.3085.3.1.3.5.11.1.2
The number of InATMARP requests sent on the PVC.
OBJECT-TYPE    
  Counter64  

csAtmConnInArpInReplies 1.3.6.1.4.1.3085.3.1.3.5.11.1.3
The number of InATMARP replies received on the PVC.
OBJECT-TYPE    
  Counter64  

csAtmConnInArpOutReplies 1.3.6.1.4.1.3085.3.1.3.5.11.1.4
The number of InATMARP replies sent on the PVC.
OBJECT-TYPE    
  Counter64  

csAtmConnInArpInvalidInReqs 1.3.6.1.4.1.3085.3.1.3.5.11.1.5
The number of Invalid InATMARP requests received on the PVC.
OBJECT-TYPE    
  Counter64  

csAtmConnInArpInvalidOutReqs 1.3.6.1.4.1.3085.3.1.3.5.11.1.6
The number of InATMARP requests for which replies did not received on the PVC.
OBJECT-TYPE    
  Counter64  

csAtmConnInArpGenericErrors 1.3.6.1.4.1.3085.3.1.3.5.11.1.7
The number of generic errors encountered while processing InATMARP requests and replies on the PVC.
OBJECT-TYPE    
  Counter64  

csAtmConnInArpStatisticsTableEnd 1.3.6.1.4.1.3085.3.1.3.5.12
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csPOSInfo 1.3.6.1.4.1.3085.3.1.3.6
OBJECT IDENTIFIER    

csPosInterfaceConfTable 1.3.6.1.4.1.3085.3.1.3.6.1
OBJECT-TYPE    
  SEQUENCE OF  
    CsPosInterfaceConfEntry

csPosInterfaceConfEntry 1.3.6.1.4.1.3085.3.1.3.6.1.1
OBJECT-TYPE    
  CsPosInterfaceConfEntry  

csPosInterfaceConfSlotIndex 1.3.6.1.4.1.3085.3.1.3.6.1.1.1
This object identifies the blade to which this POS Port is attached. Together with csPosInterfaceConfPortIndex, it uniquely identifies a physical port.
OBJECT-TYPE    
  Integer32 1..64  

csPosInterfaceConfModuleIndex 1.3.6.1.4.1.3085.3.1.3.6.1.1.2
This object identifies the specific module of this POS blade.
OBJECT-TYPE    
  Integer32 1..64  

csPosInterfaceConfPortIndex 1.3.6.1.4.1.3085.3.1.3.6.1.1.3
This object identifies the blade to which this POS Port is attached. Together with csPosInterfaceConfPortIndex, it uniquely identifies a physical port.
OBJECT-TYPE    
  Integer32 1..64  

csPosEncapsulation 1.3.6.1.4.1.3085.3.1.3.6.1.1.4
This object identifies the encapsulation format used on this Packet Over Sonet port.
OBJECT-TYPE    
  INTEGER none(1), hdlc(2), ppp(3), frameRelay(4)  

csPosAdminStatus 1.3.6.1.4.1.3085.3.1.3.6.1.1.5
This object is used to enable/disable this POS interface.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csPosOperStatus 1.3.6.1.4.1.3085.3.1.3.6.1.1.6
This object indicates the current operational status of this POS interface.
OBJECT-TYPE    
  OperStatus  

csOrionVPNInfo 1.3.6.1.4.1.3085.3.1.4
OBJECT IDENTIFIER    

csOrionVPNGeneralInfo 1.3.6.1.4.1.3085.3.1.4.1
OBJECT IDENTIFIER    

csOrionVPNTable 1.3.6.1.4.1.3085.3.1.4.1.1
A list of VPNs which belong to Orion box.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionVPNEntry

csOrionVPNEntry 1.3.6.1.4.1.3085.3.1.4.1.1.1
An entry containing management information applicable to a particular interface or management Blade.
OBJECT-TYPE    
  CsOrionVPNEntry  

csOrionGlobalVPNIndex 1.3.6.1.4.1.3085.3.1.4.1.1.1.1
A globally unique value, greater than zero, for each VPN, configured across all existing Orion boxes.
OBJECT-TYPE    
  Integer32 1..2147483647  

csOrionVPNName 1.3.6.1.4.1.3085.3.1.4.1.1.1.2
A textual string containing information about the VPN. By default this is set to 'VPN x', where x is the VPN ID.
OBJECT-TYPE    
  DisplayString  

csOrionVPNRadiusSvrList 1.3.6.1.4.1.3085.3.1.4.1.1.1.3
This object identifies a prioritized list of RADIUS servers (from the csRadiusSvrTable) that will be used when a packet needing RADIUS services is processed. NOTE: This object has been obsoleted. Each VR has its own Radius server list. see csOrionRadiusInfo
OBJECT-TYPE    
  Integer32  

csOrionVPNDNSSvrList 1.3.6.1.4.1.3085.3.1.4.1.1.1.4
This object identifies a prioritized list of DNS servers (from the csDnsSvrTable) that will be used when a packet needing DNS services is processed. NOTE: This object has been obsoleted.
OBJECT-TYPE    
  Integer32  

csOrionVPNRowStatus 1.3.6.1.4.1.3085.3.1.4.1.1.1.5
A row status type for the VPN.
OBJECT-TYPE    
  RowStatus  

csOrionVPNOperStatus 1.3.6.1.4.1.3085.3.1.4.1.1.1.6
A operational status for the VPN.
OBJECT-TYPE    
  OperStatus  

csOrionVPNVRouterInfo 1.3.6.1.4.1.3085.3.1.4.2
OBJECT IDENTIFIER    

csOrionVrGeneralInfo 1.3.6.1.4.1.3085.3.1.4.2.1
OBJECT IDENTIFIER    

csOrionVPNVRouterTable 1.3.6.1.4.1.3085.3.1.4.2.1.1
A list of Virtual Routers, configured for the VPN.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionVPNVRouterEntry

csOrionVPNVRouterEntry 1.3.6.1.4.1.3085.3.1.4.2.1.1.1
An entry containing management information applicable to a particular virtual router, configured for the VPN.
OBJECT-TYPE    
  CsOrionVPNVRouterEntry  

csOrionVPNVRouterIndex 1.3.6.1.4.1.3085.3.1.4.2.1.1.1.1
A unique value, greater than zero, for each VPN Virtual Router.
OBJECT-TYPE    
  IpAddress  

csOrionVPNVRouterName 1.3.6.1.4.1.3085.3.1.4.2.1.1.1.2
A textual string containing information about the Virtual Router, configured to the particular VPN.
OBJECT-TYPE    
  DisplayString  

csOrionVPNVRouterIpForwarding 1.3.6.1.4.1.3085.3.1.4.2.1.1.1.3
The indication of whether this entity is acting as an IP gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IP gateways forward datagrams. IP hosts do not (except those source-routed via the host). Note that for some managed nodes, this object may take on only a subset of the values possible. Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to change this object to an inappropriate value.
OBJECT-TYPE    
  INTEGER forwarding(1), not-forwarding(2)  

csOrionVPNVRouterIpDefaultTTL 1.3.6.1.4.1.3085.3.1.4.2.1.1.1.4
The default value inserted into the Time-To-Live field of the IP header of datagrams originated at this entity, whenever a TTL value is not supplied by the transport layer protocol.
OBJECT-TYPE    
  Integer32 1..255  

csOrionVPNVRouterIpReasmTimeout 1.3.6.1.4.1.3085.3.1.4.2.1.1.1.5
The maximum number of seconds which received fragments are held while they are awaiting reassembly at this entity.
OBJECT-TYPE    
  Integer32 1..2147483647  

csOrionVPNVRouterRowStatus 1.3.6.1.4.1.3085.3.1.4.2.1.1.1.8
A row status type for the VPN Virtual Router.
OBJECT-TYPE    
  RowStatus  

csOrionVPNVRouterOperStatus 1.3.6.1.4.1.3085.3.1.4.2.1.1.1.9
A operational status for the Virtual Router of the VPN.
OBJECT-TYPE    
  OperStatus  

csOrionVPNVRouterLocations 1.3.6.1.4.1.3085.3.1.4.2.1.1.1.10
This object contains an ascii string which is used to identify possible address locations for the various elements of a Virtual Router. The format of the string is 'a/x, b/y, c/z', where 'a', 'b' and 'c' denote the blade numbers and are integers (1..26); 'x', 'y' and 'z' denote the processor engine (PE) ID and are integers (0..3). Specification of PE is optional. Note, this object can only be set when the Virtual Router is being created. If nothing is entered, the Resource Manager will decide where to place the Virtual Router elements. If the blade is specified but not the PE ID, the Resource Manager will decide which PE(s) to place the various Virtual Router objects on.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionVPNVRouterType 1.3.6.1.4.1.3085.3.1.4.2.1.1.1.11
This identifies whether this Virtual Router is a data VR or the Control VR. Note, there can be only one control VR on the entire IPSX system and it must be located entirely on the control blade. Further, this object can only be set when the Virtual Router is being created.
OBJECT-TYPE    
  INTEGER customerVr(1), controlVr(2), serviceProviderVr(3)  

csOrionVPNVRouterIpDecTtl 1.3.6.1.4.1.3085.3.1.4.2.1.1.1.12
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

csOrionVPNVRouterIpDsByte 1.3.6.1.4.1.3085.3.1.4.2.1.1.1.13
This object defines the values to be placed in the TypeOfService octet of each IP packet sent out or forwarded by the VR. The valid range covers both 7-bit configurations recommended in RFC 1349 (Precedence and TOS bits) and 6-bit configurations recommended in RFC 2474 (Differentiated Services). If the value selected is 256, the DsByte is not changed and packets are forwarded with their existing TypeOfService byte value. This object can be an IPv4 TOS octet: 0 1 2 3 4 5 6 7 +-----+-----+-----+-----+-----+-----+-----+-----+ | | | | | PRECEDENCE | TOS | MBZ | | | | | +-----+-----+-----+-----+-----+-----+-----+-----+ Precedence (from RFC 791) 111 - Network Control 110 - Internetwork Control 101 - CRITIC/ECP 100 - Flash Override 011 - Flash 010 - Immediate 001 - Priority 000 - Routine TOS (from RFC 1349) 1000 -- minimize delay 0100 -- maximize throughput 0010 -- maximize reliability 0001 -- minimize monetary cost 0000 -- normal service MBZ (must be zero) is unused. Or this object can be a DS field (from RFC 2474): 0 1 2 3 4 5 6 7 +-----+-----+-----+-----+-----+-----+-----+-----+ | | | | DSCP | CU | | | | +-----+-----+-----+-----+-----+-----+-----+-----+ DSCP: differentiated services codepoint CU: currently unused DSCP is used to select the PHB (per-hop behavior) a packet experiences at each node. It is recommended that bits 0-2 of the DSCP field be employed in a manner similar to, or subsuming, the deployed uses of the IP Precedence field of an IPv4 TOS octet to maintain some form of backward compatibility.
OBJECT-TYPE    
  INTEGER 0..256  

csOrionVPNVRouterOperLocations 1.3.6.1.4.1.3085.3.1.4.2.1.1.1.14
This object contains an ascii string which is used to identify the operational address locations for the various elements of a Virtual Router. The format of the string is 'a/x, b/y, c/z', where 'a', 'b' and 'c' denote the blade numbers and are integers (1..26); 'x', 'y' and 'z' denote the processor engine ID and are integers (0..3).
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionVPNVRouterDenyPktFilterEvlogStatus 1.3.6.1.4.1.3085.3.1.4.2.1.1.1.15
If enabled, event logs will be sent when a packet hits a packet filter on the VR or on any VI in the VR with a DENY action.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOrionVPNVRouterBackupPEs 1.3.6.1.4.1.3085.3.1.4.2.1.1.1.16
This object contains an ascii string which is used to identify backup Pes for the various elements of a Virtual Router. The format of the string is 'a/x, b/y, c/z', where 'a', 'b' and 'c' denote the blade numbers and are integers (1..26); 'x', 'y' and 'z' denote the processor engine (PE) ID and are integers (0..3). Specification of PE is optional.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionVPNVRouterFailOver 1.3.6.1.4.1.3085.3.1.4.2.1.1.1.17
If the attribute is 'true' then the the VR will be failed over to the backup PE. VR failover actually starts after the the fail-over timer has expired
OBJECT-TYPE    
  TruthValue  

csOrionVPNVRouterAbortFailOver 1.3.6.1.4.1.3085.3.1.4.2.1.1.1.18
If the attribute is 'true' then the the VR will be failed over to the backup PE. VR failover actually starts after the the fail-over timer has expired
OBJECT-TYPE    
  TruthValue  

csOrionVPNVRouterFailbackToPrimary 1.3.6.1.4.1.3085.3.1.4.2.1.1.1.19
If the attribute is 'true' then the the VR will be failback to the Primary PE. Setting this attribute makes sense ONLY when manual VR fail-over failed
OBJECT-TYPE    
  TruthValue  

csOrionVPNVRouterCreationTime 1.3.6.1.4.1.3085.3.1.4.2.1.1.1.20
If the attribute is 'true' then the the VR will be failed over to the backup PE immediately. Setting this attribute makes sense ONLY when csOrionVPNVRouterFailOver is also set
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionVPNVRouterUpTime 1.3.6.1.4.1.3085.3.1.4.2.1.1.1.21
If the attribute is 'true' then the the VR will be failed over to the backup PE immediately. Setting this attribute makes sense ONLY when csOrionVPNVRouterFailOver is also set
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csRtgPolicy 1.3.6.1.4.1.3085.3.1.4.2.1.2
OBJECT IDENTIFIER    

csImpPolTable 1.3.6.1.4.1.3085.3.1.4.2.1.2.1
This table is used to configure the import policies stored on a virtual router. Once configured, these policies can be applied to any routing protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    CsImpPolEntry

csImpPolEntry 1.3.6.1.4.1.3085.3.1.4.2.1.2.1.1
Each entry contains information about a single import policy.
OBJECT-TYPE    
  CsImpPolEntry  

csImpPolId 1.3.6.1.4.1.3085.3.1.4.2.1.2.1.1.1
This object identifies a specific Import Policy entry.
OBJECT-TYPE    
  Integer32 1..65535  

csImpPolGenAclId 1.3.6.1.4.1.3085.3.1.4.2.1.2.1.1.2
The identifier of General Access List entry that this Policy uses. The value -1 represents a wildcard for this Import Policy parameter.
OBJECT-TYPE    
  Integer32 -1..65535  

csImpPolPeerAS 1.3.6.1.4.1.3085.3.1.4.2.1.2.1.1.3
Used by BGP, the autonomous system number of the remote peer. The value -1 represents a wildcard for this Import Policy parameter.
OBJECT-TYPE    
  Integer32 -1..65535  

csImpPolHomeAS 1.3.6.1.4.1.3085.3.1.4.2.1.2.1.1.4
Used by BGP, the home autonomous system number of the BGP system originating the update. The value -1 represents a wildcard for this Import Policy parameter.
OBJECT-TYPE    
  Integer32 -1..65535  

csImpPolOrigin 1.3.6.1.4.1.3085.3.1.4.2.1.2.1.1.5
Used by BGP, the origin type as placed in the AS path by the originator of the update. The origin could be IGP (the route was learned from an internal gateway protocol), EGP (the route was learned via an exterior gateway protocol) or unknown (the origin of the route cannot be determined). any (signal policy module to ignore this value) The value egp is deprecated.
OBJECT-TYPE    
  INTEGER unknown(1), igp(2), egp(3), any(4)  

csImpPolAction 1.3.6.1.4.1.3085.3.1.4.2.1.2.1.1.6
The action to take on routes that match this policy.
OBJECT-TYPE    
  INTEGER permit(1), deny(2)  

csImpPolPreference 1.3.6.1.4.1.3085.3.1.4.2.1.2.1.1.7
The preference to apply to routes that match this policy. Note, this object only applies to import policies that have a 'permit' action. The value -1 indicates this parameter has not been set.
OBJECT-TYPE    
  Integer32 -1..65535  

csImpPolRowStatus 1.3.6.1.4.1.3085.3.1.4.2.1.2.1.1.8
The RowStatus object for this table. This is used to add/delete rows from this table.
OBJECT-TYPE    
  RowStatus  

csImpPolBgpCommunity1 1.3.6.1.4.1.3085.3.1.4.2.1.2.1.1.9
The BGP Community parameter 1. Refer to RFC1997. The following values are not allowed in the configuration: 0 through 0x0000FFFF and 0xFFFF0000 through 0xFFFFFFFF.
OBJECT-TYPE    
  Integer32  

csExpPolTable 1.3.6.1.4.1.3085.3.1.4.2.1.2.2
This table is used to configure the export policies stored on a virtual router. Once configured, these policies can be applied to any routing protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    CsExpPolEntry

csExpPolEntry 1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1
Each entry contains information about a single import policy.
OBJECT-TYPE    
  CsExpPolEntry  

csExpPolId 1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.1
This object identifies a specific Export Policy entry.
OBJECT-TYPE    
  Integer32 1..65535  

csExpPolGenAclId 1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.2
The identifier of General Access List entry that this Policy uses. The value -1 represents a wildcard for this Import Policy parameter.
OBJECT-TYPE    
  Integer32 -1..65535  

csExpPolPeerAS 1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.3
The target system's autonomous system number. The value -1 represents a wildcard for this Import Policy parameter.
OBJECT-TYPE    
  Integer32 -1..65535  

csExpPolProtocol 1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.4
The protocol that has added the route to the routing table.
OBJECT-TYPE    
  INTEGER all(1), local(2), bgp(3), rip(4), ospf(5), static(6), i-bgp(7), ospf-ext(8), isis(9), aggregate(10), dial-ppp(11), dial-ipsec(12)  

csExpPolEgpAS 1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.5
If a route was added via EGP, this object is the AS number of the EGP peer. The value -1 represents a wildcard for this Import Policy parameter.
OBJECT-TYPE    
  Integer32 -1..65535  

csExpPolBgpAS 1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.6
If a route was added via BGP, this object is the AS number of the BGP peer. The value -1 represents a wildcard for this Import Policy parameter.
OBJECT-TYPE    
  Integer32 -1..65535  

csExpPolExtRteTag 1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.7
If the route was added via OSPF External, this is the eter The value -1 represents a wildcard for this Import Policy parameter.
OBJECT-TYPE    
  Integer32  

csExpPolRipIp 1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.8
The value 0.0.0.0 represents a wildcard for this Import Policy parameter.
OBJECT-TYPE    
  IpAddress  

csExpPolRipNbrIp 1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.9
The value 0.0.0.0 represents a wildcard for this Import Policy parameter.
OBJECT-TYPE    
  IpAddress  

csExpPolAction 1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.10
The action to perform on packets matching this policy.
OBJECT-TYPE    
  INTEGER export(1), block(2)  

csExpPolMetric 1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.11
The metric to assign to packets matching this policy. The value -1 indicates this parameter has not been set.
OBJECT-TYPE    
  Integer32 -1..65535  

csExpPolRowStatus 1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.12
The RowStatus object for this table. This is used to add/delete rows from this table.
OBJECT-TYPE    
  RowStatus  

csExpPolBgpCommunity1 1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.13
The BGP Community parameter 1. Refer to RFC1997. The following values are not allowed in the configuration: 0 through 0x0000FFFF and 0xFFFF0000 through 0xFFFFFFFF. But the following values are allowed within that range: 0xFFFF FF01 (NO-EXPORT) 0xFFFF FF02 (NO-ADVERTISE) 0xFFFF FF03 (NO-EXPORT-SUB) Note that this value can not be set to 0 unless csExpPolBgpCommunity2 is set to 0.
OBJECT-TYPE    
  Integer32  

csExpPolBgpCommunity2 1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.14
Same description as csExpPolBgpCommunity1
OBJECT-TYPE    
  Integer32  

csExpPolRouteType 1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.15
RouteType to be matched when exporting ISIS/OSPF route into another protocol. ISISlevel1, ISISlevel2 and ISISlevel12 can be set if csExpPolProtocol is set to ISIS. OSPFinternal, OSPFexternal, OSPFexternal1 and OSPFexternal2 can be set if csExpPolProtocol is set to OSPF
OBJECT-TYPE    
  INTEGER any(0), isislevel1(1), isislevel2(2), isislevel12(3), ospfinternal(4), ospfexternal(5), ospfexternal1(6), ospfexternal2(7)  

csExpPolMetricType 1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.16
Metric type to be set when exporting route into a protocol. OSPFtype1 and OSPFtype2 are only applicable for OSPF. ISISinternal and ISISexternal are only applicable for ISIS.
OBJECT-TYPE    
  INTEGER any(0), ospftype1(1), ospftype2(2), isisinternal(3), isisexternal(4)  

csExpPolLevel 1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.17
To indicate where to import routes, applicable to ISIS and OSPF only. ISISlevel1, ISISlevel2, ISISlevel3 are applicable when you apply export policy for ISIS. OSPFstubarea and OSPFbackbone are applicable when you apply export policy for OSPF.
OBJECT-TYPE    
  INTEGER any(0), isislevel1(1), isislevel2(2), isislevel12(3), ospfstubarea(4), ospfbackbone(5)  

csExpPolTableEnd 1.3.6.1.4.1.3085.3.1.4.2.1.2.3
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csRtPolicyTermTable 1.3.6.1.4.1.3085.3.1.4.2.1.2.4
This table is used to configure route policies. Each route policy is referred by a name 'csRtPolicyName'. A route policy consists of multiple named terms which are referred by 'csRtPolicyTermName'. A route term constitues a set of match conditions, modifiers (set attributes) and a flow action for the policy execution.
OBJECT-TYPE    
  SEQUENCE OF  
    CsRtPolicyTermEntry

csRtPolicyTermEntry 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1
Each entry contains information about a single policy term. The policy name along with the term name identifies an entry.
OBJECT-TYPE    
  CsRtPolicyTermEntry  

csRtPolicyName 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.1
This object identifies a specific route policy. A policy name can contain alphanumeric characters and hyphens (-).
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

csRtPolicyTermName 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.2
This object along with the csRtPolicyName identifies a unique policy term table entry. A csRtPolicyAction table entry is also associated with a policy term. A policy term name can contain alphanumeric characters and hyphens (-).
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

csRtPolicyTermSeqNum 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.3
The sequence number of this policy term. Policy terms are evaluated in the ascending order of thier sequence numbers. If more than one term has the same sequence number then the order of their evaluation relative to each other may be abribtrary.
OBJECT-TYPE    
  Integer32 1..65535  

csRtPolicyTermFromBgpASPathName 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.4
The identifier for a BGP AS path regular expression. It is used to locate an AS path entry in csRtPolicyExpTable. A NULL string indicates that this object is note used in this table entry.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

csRtPolicyTermFromVpnRouteTargetNamesListFlag 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.5
If the attribute is 'true' then the VPN Route Target names list is specified as a match condition. The VPN Route Target names list can be accessed from csRtPolicyStrTable using the the following index attributes: csRtPolicyStrType = term-from-vpn-route-target-names-list csRtPolicyStrName = 'csRtPolicyName/csRtPolicyTermName'
OBJECT-TYPE    
  TruthValue  

csRtPolicyTermFromVpnSoo 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.6
A site-of-origin value to match the SOO of a VPN route. If this attribute is set then this attribute is a string of upto 32 bytes Value is absolute value or in regular expression format. If this attribute is not set then it is of zero length.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

csRtPolicyTermFromVpnRd 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.7
A list of route distinguisher values to match the RD of a VPN route. If this attribute is set then this attribute is a string of upto 32 bytes Value is absolute value or in regular expression format. If this attribute is not set then it is of zero length.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

csRtPolicyTermFromBgpCommNamesListFlag 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.8
If the attribute is 'true' then the BGP community names list is specified specified as a match condition. The BGP community names list can be accessed from csRtPolicyStrTable using the the following index attributes: csRtPolicyStrType = term-from-community-names-list csRtPolicyStrName = 'csRtPolicyName/csRtPolicyTermName'
OBJECT-TYPE    
  TruthValue  

csRtPolicyTermFromBgpLocalPref 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.9
The BGP local preference attribute. [Check ranges and default]
OBJECT-TYPE    
  Integer32 -1..65535  

csRtPolicyTermFromBgpOrigin 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.10
Used by BGP, the origin type as placed in the AS path by the originator of the update. The origin could be IGP (the route was learned from an internal gateway protocol), EGP (the route was learned via an exterior gateway protocol) or incomplete (the origin of the route cannot be determined). none (signal policy module to ignore this value) The value egp is deprecated.
OBJECT-TYPE    
  INTEGER none(0), incomplete(1), igp(2), egp(3)  

csRtPolicyTermFromIntfIndex 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.11
The index of the interface from which this route was learnt. This condition should not be used for protocols which are not interface specific, eg. IBGP. The value -1 indicates that this attribute is not used.
OBJECT-TYPE    
  Integer32  

csRtPolicyTermFromIntfAddr 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.12
The IP address of the interface from which this route was learnt. This condition should not be used for protocols which are not interface specific, eg. IBGP. The value 0.0.0.0 represents that this attribute is not used.
OBJECT-TYPE    
  IpAddress  

csRtPolicyTermFromIsisLevel 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.13
ISIS level of the route.
OBJECT-TYPE    
  INTEGER none(0), level1(1), level2(2)  

csRtPolicyTermFromIsisMetricType 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.14
ISIS Metric type to match for the policy.
OBJECT-TYPE    
  INTEGER none(0), internal(3), external(4)  

csRtPolicyTermFromMetric1 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.15
The route metric to match for this policy. The value -1 indicates this parameter has not been set.
OBJECT-TYPE    
  Integer32 -1..2147483647  

csRtPolicyTermFromMetric2 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.16
The route metric2 to match for this policy. The value -1 indicates this parameter has not been set.
OBJECT-TYPE    
  Integer32 -1..2147483647  

csRtPolicyTermFromNbrAddr 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.17
The value 0.0.0.0 represents that this attribute is not used.
OBJECT-TYPE    
  IpAddress  

csRtPolicyTermFromNbrGroupName 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.18
The Name of the BGP Neighbor Group
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

csRtPolicyTermFromNextHopAddrIndex 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.19
The value 0.0.0.0 represents a wildcard for this parameter.
OBJECT-TYPE    
  IpAddress  

csRtPolicyTermFromOspfArea 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.20
The OSPF area identifier.
OBJECT-TYPE    
  IpAddress  

csRtPolicyTermFromOspfAreaType 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.21
OSPF area type to match for the policy.
OBJECT-TYPE    
  INTEGER none(0), nssa(4), backbone(8), normal(16), stub(32)  

csRtPolicyTermFromOspfMetricType 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.22
OSPF metric type to match for the policy.
OBJECT-TYPE    
  INTEGER none(0), type1(1), type2(2), internal(3), external(4)  

csRtPolicyTermFromOspfTag1 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.23
The 32-bit tag filed in OSPF external LSA packets
OBJECT-TYPE    
  Integer32  

csRtPolicyTermFromOspfTag2 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.24
The 32-bit tag filed in OSPF external LSA packets
OBJECT-TYPE    
  Integer32  

csRtPolicyTermFromPolicyNamesListFlag 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.25
If the attribute is 'true' then a list of policy names is specified as a match condition. Each name in the list represents a route policy. The policy names list can be accessed from csRtPolicyStrTable using the the following index attributes: csRtPolicyStrType = term-from-policy-names-list csRtPolicyStrName = 'csRtPolicyName/csRtPolicyTermName' csRtPolicyStrFragId =
OBJECT-TYPE    
  TruthValue  

csRtPolicyTermFromPreference1 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.26
The preference to apply to routes that match this policy. Note, this object only applies to import policies that have a 'permit' action. The value -1 indicates this parameter has not been set.
OBJECT-TYPE    
  Integer32 -1..65535  

csRtPolicyTermFromPreference2 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.27
The preference to apply to routes that match this policy. Note, this object only applies to import policies that have a 'permit' action. The value -1 indicates this parameter has not been set.
OBJECT-TYPE    
  Integer32 -1..65535  

csRtPolicyTermFromPrefixNamesListFlag 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.28
If the attribute is 'true' then a list of prefix-list names is specified as a match condition. Each name in the list represents a prefix-list. The prefix names list can be accessed from csRtPolicyStrTable using the the following index attributes: csRtPolicyStrType = term-from-prefix-names-list csRtPolicyStrName = 'csRtPolicyName/csRtPolicyTermName' csRtPolicyStrFragId =
OBJECT-TYPE    
  TruthValue  

csRtPolicyTermFromRouteFilterFlag 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.29
If the attribute is 'true' then a list of route-filters are specified as a match condition.
OBJECT-TYPE    
  TruthValue  

csRtPolicyTermFromProtocol 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.30
The protocol that has added the route to the routing table. Each bit within this object specifies protocol added the route. Below is a list of the protocols and their corresponding bits identifiers. options bit -------------------------------------- none 0 local 1 bgp 2 rip 4 ospf 8 static 16 isis 32 aggregate 64 vpn 128 dial-ppp 256 dial-ipsec 512 End of description.
OBJECT-TYPE    
  Unsigned32  

csRtPolicyTermToIsisLevel 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.31
ISIS level for the routing instance. This attribute is used in policies to redistribute routes into ISIS.
OBJECT-TYPE    
  INTEGER none(0), level1(1), level2(2)  

csRtPolicyTermToOspfAreaType 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.32
OSPF area type for the policy.
OBJECT-TYPE    
  INTEGER none(0), nssa(4), backbone(8)  

csRtPolicyTermToNbrAddr 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.33
The value 0.0.0.0 represents a wildcard for this parameter.
OBJECT-TYPE    
  IpAddress  

csRtPolicyTermToNbrGroupName 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.34
The Name of the BGP Neighbor Group
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

csRtPolicyTermActionFlag 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.35
If the attribute is 'true' then a action is specified.
OBJECT-TYPE    
  TruthValue  

csRtPolicyTermActionBgpASPathName 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.36
The AS Path to prepend. This object is a list of AS numbers. A NULL string indicates that this object is note used in this entry.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

csRtPolicyTermActionBgpASPathOp 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.37
The operation to perform on the associated route attribute. none: no operation is performed, i.e., the AS path attribute is not modified. prepend: prepend the route's AS path attribute with the AS path list specified by csRtPolicyTermActionBgpASPathName.
OBJECT-TYPE    
  INTEGER none(0), prepend(4)  

csRtPolicyTermActionVpnRouteTargetNamesListFlag 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.38
If the attribute is 'true' then the VPN Route Target names list is specified as an action condition. The VPN Route Target names list can be accessed from csRtPolicyStrTable using the following index attributes: csRtPolicyStrType = term-action-vpn-route-target-names-list csRtPolicyStrName = 'csRtPolicyName/csRtPolicyTermName' csRtPolicyStrFragId =
OBJECT-TYPE    
  TruthValue  

csRtPolicyTermActionVpnRouteTargetOp 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.39
The operation to perform on the associated route attribute. none: no operation is performed, i.e., the route target is not modified. set: replace the route's route target with the members of route targets list specified add: add the route's route target with the members of route targets list specified subtract: remove the members of route targets list specified from route's route target
OBJECT-TYPE    
  INTEGER none(0), set(1), add(2), subtract(3)  

csRtPolicyTermActionVpnSooOp 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.40
The operation to perform on the associated route attribute. none: no operation is performed, i.e., the site of origin is not modified. set: replace the route's site of origin with the site of origin value specified in action. delete: delete the route's site of origin
OBJECT-TYPE    
  INTEGER none(0), set(1), delete(2)  

csRtPolicyTermActionVpnSoo 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.41
The site of origin to use for a VPN route. If this attribute is set then this attribute is a string of upto 32 bytes absolute value or in regular expression format otherwise it is of zero length.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

csRtPolicyTermActionVpnRd 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.42
The route distinguisher to use for a VPN route. If this attribute is set then this attribute is a string of upto 32 bytes absolute value or in regular expression format otherwise it is of zero length.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

csRtPolicyTermActionBgpCommNamesListFlag 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.43
If the attribute is 'true' then the BGP community names list is specified as an action condition. The BGP community names list can be accessed from csRtPolicyStrTable using the the following index attributes: csRtPolicyStrType = term-action-community-names-list csRtPolicyStrName = 'csRtPolicyName/csRtPolicyTermName' csRtPolicyStrFragId =
OBJECT-TYPE    
  TruthValue  

csRtPolicyTermActionBgpCommOp 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.44
The operation to perform on the associated route attribute. none: no operation is performed, i.e., the community attribute is not modified. set: replace the route's community attribute with the communities specified by csRtPolicyTermActionBgpCommIndex. add: add the communities specified by csRtPolicyTermActionBgpCommIndex to the route's community attribute. subtract: remove the communities specified by csRtPolicyTermActionBgpCommIndex from the route's community attribute.
OBJECT-TYPE    
  INTEGER none(0), set(1), add(2), subtract(3)  

csRtPolicyTermActionBgpLocalPref 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.45
The BGP local preference attribute. [Check ranges and default]
OBJECT-TYPE    
  Integer32 -1..65535  

csRtPolicyTermActionBgpLocalPrefOp 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.46
The operation to perform on the associated route attribute.
OBJECT-TYPE    
  INTEGER none(0), set(1), add(2), subtract(3)  

csRtPolicyTermActionBgpOrigin 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.47
Used by BGP, the origin type as placed in the AS path by the originator of the update. The origin could be IGP (the route was learned from an internal gateway protocol), EGP (the route was learned via an exterior gateway protocol) or incomplete (the origin of the route cannot be determined). any (signal policy module to ignore this value) The value egp is deprecated.
OBJECT-TYPE    
  INTEGER none(0), incomplete(1), igp(2), egp(3)  

csRtPolicyTermActionBgpMetricType 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.48
BGP metric type to set for the route. none: this action object is not used internal: use the IGP metric.
OBJECT-TYPE    
  INTEGER none(0), internal(3)  

csRtPolicyTermActionMetric 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.49
The route metric to match for this policy. The value -1 indicates this parameter has not been set.
OBJECT-TYPE    
  Integer32 -1..2147483647  

csRtPolicyTermActionMetricOp 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.50
The operation to perform on the associated route attribute.
OBJECT-TYPE    
  INTEGER none(0), set(1), add(2), subtract(3)  

csRtPolicyTermActionMetric2 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.51
The route metric2 to match for this policy. The value -1 indicates this parameter has not been set.
OBJECT-TYPE    
  Integer32 -1..2147483647  

csRtPolicyTermActionMetric2Op 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.52
The operation to perform on the associated route attribute.
OBJECT-TYPE    
  INTEGER none(0), set(1), add(2), subtract(3)  

csRtPolicyTermActionIsisMetricType 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.53
ISIS metric type to set for the route. Value none indicates that this action object is not used.
OBJECT-TYPE    
  INTEGER none(0), internal(3), external(4)  

csRtPolicyTermActionNextHopAddrType 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.54
The next hop address type. If the value is set to 'nh-address' then the IP-address specified in csRtPolicyTermActionNextHopAddr should be used. Value none indicates that this action object is not used.
OBJECT-TYPE    
  INTEGER none(0), nh-self(1), nh-address(2)  

csRtPolicyTermActionNextHopAddr 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.55
The nexthop address to set for the route. This attribute is valid only if the csRtPolicyTermActionNextHopAddrType is set to 'nh-address'. If value is 0.0.0.0 then this object is not set.
OBJECT-TYPE    
  IpAddress  

csRtPolicyTermActionOspfMetricType 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.56
OSPF Metric type to set for the route. Value none indicates that this action object is not used.
OBJECT-TYPE    
  INTEGER none(0), type1(1), type2(2)  

csRtPolicyTermActionOspfTag 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.57
The 32-bit tag filed in OSPF external LSA packets
OBJECT-TYPE    
  Integer32  

csRtPolicyTermActionOspfTagOp 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.58
The operation to perform on the associated route attribute.
OBJECT-TYPE    
  INTEGER none(0), set(1), add(2), subtract(3)  

csRtPolicyTermActionOspfTag2 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.59
The 32-bit tag filed in OSPF external LSA packets
OBJECT-TYPE    
  Integer32  

csRtPolicyTermActionOspfTag2Op 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.60
The operation to perform on the associated route attribute.
OBJECT-TYPE    
  INTEGER none(0), set(1), add(2), subtract(3)  

csRtPolicyTermActionPreference 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.61
The preference to apply to routes that match this policy. Note, this object only applies to import policies that have a 'permit' action. The value -1 indicates this parameter has not been set.
OBJECT-TYPE    
  Integer32 -1..65535  

csRtPolicyTermActionPreferenceOp 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.62
The operation to perform on the associated route attribute.
OBJECT-TYPE    
  INTEGER none(0), set(1), add(2), subtract(3)  

csRtPolicyTermActionPreference2 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.63
The preference to apply to routes that match this policy. Note, this object only applies to import policies that have a 'permit' action. The value -1 indicates this parameter has not been set.
OBJECT-TYPE    
  Integer32 -1..65535  

csRtPolicyTermActionPreference2Op 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.64
The operation to perform on the associated route attribute.
OBJECT-TYPE    
  INTEGER none(0), set(1), add(2), subtract(3)  

csRtPolicyTermActionFlow 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.65
The policy flow control actions. This action is applied after all the other action objects are processed. none: use default behavior accept: accept the route. No other terms or policies are evaluated. All other action objects in this entry are processed before this action. reject: reject the route. No other terms or policies are evaluated. Other action objects are not used in combination with it. next-term: skip to and evaluate the next term in the same policy. All other action objects in this entry are processed before this action. next-policy: skip to and evaluate the first term of the next policy. All other action objects in this entry are processed before this action.
OBJECT-TYPE    
  INTEGER none(0), accept(1), reject(2), nextPolicy(3), nextTerm(4)  

csRtPolicyTermActionLogFlag 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.66
Enable/disable logging this policy action.
OBJECT-TYPE    
  TruthValue  

csRtPolicyTermRowStatus 1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.67
The RowStatus object for this table. This is used to add/delete rows from this table.
OBJECT-TYPE    
  RowStatus  

csRtPolicyTermTableEnd 1.3.6.1.4.1.3085.3.1.4.2.1.2.5
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csPolicyRouteFilterTable 1.3.6.1.4.1.3085.3.1.4.2.1.2.6
This table holds policy related route filter entries. A route filter is a prefix or prefix-range with an associated action. A route filter may have action attributes associtaed with it. A route filter is identified by the isame csRtPolicyName and csRtPolicyTermName attributes constitute the route-filter list of a policy term. Route-filters within a list are processed in the ascending order of csPolicyRouteFilterSeqNum attribute if the prefix/mask are the same; otherwise the longest prefix match first rule is used.
OBJECT-TYPE    
  SEQUENCE OF  
    CsPolicyRouteFilterEntry

csPolicyRouteFilterEntry 1.3.6.1.4.1.3085.3.1.4.2.1.2.6.1
Each table entry contains information about a single route filter.
OBJECT-TYPE    
  CsPolicyRouteFilterEntry  

csPolicyRouteFilterPrefix 1.3.6.1.4.1.3085.3.1.4.2.1.2.6.1.1
The IP prefix for this route-filter entry.
OBJECT-TYPE    
  IpAddress  

csPolicyRouteFilterPrefixLen 1.3.6.1.4.1.3085.3.1.4.2.1.2.6.1.2
The prefix length for this entry.
OBJECT-TYPE    
  Integer32 0..32  

csPolicyRouteFilterMatchType 1.3.6.1.4.1.3085.3.1.4.2.1.2.6.1.3
The match type for this entry. exact: the route prefix should match csPolicyRouteFilterPrefix and prefix-length should be equal to csPolicyRouteFilterPrefixLen. longer: csPolicyRouteFilterPrefix matches the route-prefix exactly and csPolicyRouteFilterPrefixLen is greater than prefix-length. orlonger: csPolicyRouteFilterPrefix matches the route-prefix exactly and csPolicyRouteFilterPrefixLen is greater than prefix-length. upto: the most significant bits of csPolicyRouteFilterPrefix and the route-prefix match for csPolicyRouteFilterPrefixLen bits; the route's prefix length is between csPolicyRouteFilterPrefixLen and csPolicyRouteFilterPrefixLen2 (inclusive). through: the following condition should match. - prefix matches csPolicyRouteFilterPrefix - prefix matches csPolicyRouteFilterPrefix2 for route's prefix length bits (most significant) - prefix length is less than or equal to csPolicyRouteFilterPrefixLen2.
OBJECT-TYPE    
  INTEGER exact(1), longer(2), orlonger(3), upto(4), through(5)  

csPolicyRouteFilterPrefix2 1.3.6.1.4.1.3085.3.1.4.2.1.2.6.1.4
The second prefix for this entry. This is used to specify the route range. This object is valid only if csPolicyRouteFilterMatchType value is 'through'. Otherwise the value should be set to 0.0.0.0
OBJECT-TYPE    
  IpAddress  

csPolicyRouteFilterPrefixLen2 1.3.6.1.4.1.3085.3.1.4.2.1.2.6.1.5
The second prefix length for this entry. This is used specify the prefix-length range. This object is valid only if csPolicyRouteFilterMatchType value is 'upto' or 'through'. Otherwise the value should be set to 0.
OBJECT-TYPE    
  Integer32 1..32  

csPolicyRouteFilterSeqNum 1.3.6.1.4.1.3085.3.1.4.2.1.2.6.1.6
The sequence number of the prefix entry. The entries within a route-filter list are evaluated using the longest prefix match rule. If more than one entry have the same prefixe i.e., csPolicyRouteFilterPrefix and csPolicyRouteFilterPrefixLen match then they are evaluated in the ascending order of sequence numbers.
OBJECT-TYPE    
  Integer32  

csRtPolicyRouteFilterActionFlow 1.3.6.1.4.1.3085.3.1.4.2.1.2.6.1.7
The policy flow control actions. This action is applied after all the other action objects are processed. none: use default behavior accept: accept the route. No other terms or policies are evaluated. All other action objects in this entry are processed before this action. reject: reject the route. No other terms or policies are evaluated. Other action objects are not used in combination with it. next-term: skip to and evaluate the next term in the same policy. All other action objects in this entry are processed before this action. next-policy: skip to and evaluate the first term of the next policy. All other action objects in this entry are processed before this action.
OBJECT-TYPE    
  INTEGER none(0), accept(1), reject(2), nextPolicy(3), nextTerm(4)  

csRtPolicyRouteFilterActionLogFlag 1.3.6.1.4.1.3085.3.1.4.2.1.2.6.1.8
Enable/disable logging this policy action.
OBJECT-TYPE    
  TruthValue  

csPolicyRouteFilterRowStatus 1.3.6.1.4.1.3085.3.1.4.2.1.2.6.1.9
The RowStatus object for this table. This is used to add/delete rows from this table.
OBJECT-TYPE    
  RowStatus  

csPolicyRouteFilterTableEnd 1.3.6.1.4.1.3085.3.1.4.2.1.2.7
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csRtPolicyPrefixListTable 1.3.6.1.4.1.3085.3.1.4.2.1.2.8
This table holds IP prefix entries for prefix-lists. A prefix-list is a named list of IP prefixes. A prefix can be specified as an IP address and mask for exact match or can be specified as a range of IP addresses for other match conditions. Each table entry constitutes a single prefix.
OBJECT-TYPE    
  SEQUENCE OF  
    CsRtPolicyPrefixListEntry

csRtPolicyPrefixListEntry 1.3.6.1.4.1.3085.3.1.4.2.1.2.8.1
Each entry contains information about a single route prefix or range
OBJECT-TYPE    
  CsRtPolicyPrefixListEntry  

csRtPolicyPrefixListName 1.3.6.1.4.1.3085.3.1.4.2.1.2.8.1.1
The name of the prefix-list. A name can contain alphanumeric characters and hyphens (-).
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

csRtPolicyPrefixListPrefix 1.3.6.1.4.1.3085.3.1.4.2.1.2.8.1.2
The IP prefix for this entry.
OBJECT-TYPE    
  IpAddress  

csRtPolicyPrefixListPrefixLen 1.3.6.1.4.1.3085.3.1.4.2.1.2.8.1.3
The prefix length for this entry.
OBJECT-TYPE    
  Integer32 0..32  

csRtPolicyPrefixListMatchType 1.3.6.1.4.1.3085.3.1.4.2.1.2.8.1.4
The match type for this entry. exact: the route prefix should match csRtPolicyPrefixListPrefix and prefix-length should be equal to csRtPolicyPrefixListPrefixLen. longer: csRtPolicyPrefixListPrefix matches the route-prefix exactly and csRtPolicyPrefixListPrefixLen is greater than prefix-length. orlonger: csRtPolicyPrefixListPrefix matches the route-prefix exactly and csRtPolicyPrefixListPrefixLen is greater than prefix-length. upto: the most significant bits of csRtPolicyPrefixListPrefix and the route-prefix match for csRtPolicyPrefixListPrefixLen bits; the route's prefix length is between csRtPolicyPrefixListPrefixLen and csRtPolicyPrefixListPrefixLen2 (inclusive). through: the following condition should match. - prefix matches csRtPolicyPrefixListPrefix - prefix matches csRtPolicyPrefixListPrefix2 for route's prefix length bits (most significant) - prefix length is less than or equal to csRtPolicyPrefixListPrefixLen2.
OBJECT-TYPE    
  INTEGER exact(1), longer(2), orlonger(3), upto(4), through(5)  

csRtPolicyPrefixListPrefix2 1.3.6.1.4.1.3085.3.1.4.2.1.2.8.1.5
The second prefix for this entry. This is used to specify the route range. This object is valid only if csRtPolicyPrefixListMatchType value is 'through'.
OBJECT-TYPE    
  IpAddress  

csRtPolicyPrefixListPrefixLen2 1.3.6.1.4.1.3085.3.1.4.2.1.2.8.1.6
The second prefix length for this entry. This is used specify the prefix-length range. This object is valid only if csRtPolicyPrefixListMatchType value is 'upto' or 'through'.
OBJECT-TYPE    
  Integer32 1..32  

csRtPolicyPrefixListRowStatus 1.3.6.1.4.1.3085.3.1.4.2.1.2.8.1.7
The RowStatus object for this table. This is used to add/delete rows from this table.
OBJECT-TYPE    
  RowStatus  

csRtPolicyPrefixListTableEnd 1.3.6.1.4.1.3085.3.1.4.2.1.2.9
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csRtPolicyStrTable 1.3.6.1.4.1.3085.3.1.4.2.1.2.10
This is a generic table to hold all the policy related string attributes. These could be lists of names, logical or regular expressions related to policy configuration. Eg: AS Path regular expressions, BGP community. The csRtPolicyStrType attribute holds the type of the policy string. Strings larger than 255 bytes are fragmented into 255 bytes segments with each fragment stored as a single table entry.
OBJECT-TYPE    
  SEQUENCE OF  
    CsRtPolicyStrEntry

csRtPolicyStrEntry 1.3.6.1.4.1.3085.3.1.4.2.1.2.10.1
Each entry contains information about a single policy string fragment.
OBJECT-TYPE    
  CsRtPolicyStrEntry  

csRtPolicyStrType 1.3.6.1.4.1.3085.3.1.4.2.1.2.10.1.1
Type of policy related logical or regular expression. Regular expressions are used by AS Paths and BGP communityies. Logical expressions are used to create conditional policy statements for use by import/export policies.
OBJECT-TYPE    
  INTEGER asPath(1), bgpCommunity(2), termFromCommunityNamesList(3), termFromPolicyNamesList(4), termFromPrefixNamesList(5), termActionCommunityNamesList(6), rtFilterActionCommunityNamesList(7), vpnAccessCustomerList(8), bgpExtCommunity(9), termFromExtCommunityNamesList(10), termActionExtCommunityNamesList(11)  

csRtPolicyStrName 1.3.6.1.4.1.3085.3.1.4.2.1.2.10.1.2
The name for the policy string. A name can contain alphanumeric charachers and hyphens (-). The name is unique for a given type.
OBJECT-TYPE    
  DisplayString SIZE(0..65)  

csRtPolicyStrData 1.3.6.1.4.1.3085.3.1.4.2.1.2.10.1.3
The policy expression.
OBJECT-TYPE    
  DisplayString SIZE(0..254)  

csRtPolicyStrRowStatus 1.3.6.1.4.1.3085.3.1.4.2.1.2.10.1.4
The RowStatus object for this table. This is used to add/delete rows from this table.
OBJECT-TYPE    
  RowStatus  

csRtPolicyStrTableEnd 1.3.6.1.4.1.3085.3.1.4.2.1.2.11
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csRtPolicyUserTable 1.3.6.1.4.1.3085.3.1.4.2.1.2.12
This table hold routing policy usage configuration for all protocols/components in the router. It is normally the import-policy/export-policy configuration statements in a protocol context. The index is specified as a {Type,Value} to account for the differences between protocols. For example, if protocol type is BGP then the index identifies also identifies the BGP peer or group for which the configuration is applicable.
OBJECT-TYPE    
  SEQUENCE OF  
    CsRtPolicyUserEntry

csRtPolicyUserEntry 1.3.6.1.4.1.3085.3.1.4.2.1.2.12.1
Each entry contains information about a single policy usage configuration. It represents an import-policy or export-policy statement for a ptotocol.
OBJECT-TYPE    
  CsRtPolicyUserEntry  

csRtPolicyUserType 1.3.6.1.4.1.3085.3.1.4.2.1.2.12.1.1
The route policy user type. It is the protocol configuration element using the import/export policy.
OBJECT-TYPE    
  INTEGER other(1), rip(2), ospf(3), isis(4), bgpPeer(5), bgpGroup(6), vpnVrf(7), vpnVrm(8)  

csRtPolicyUserIndexValue 1.3.6.1.4.1.3085.3.1.4.2.1.2.12.1.2
The value field is specific to each protocol user. Most protocols will be using this field. The encoding of this attruibute for protocols using it is specified below. It should be specified as defined below for the following csRtPolicyUserType values: RIP : not used OSPF : not used ISIS : not used BGP-PEER: 7-15 char ipaddress dotted-decimal string (BGPNbrAddress) BGP-GROUP: 1-32 byte peer-group name (BGPGroupName) VPN-VRF: not used VPN-VRM: not used
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

csRtPolicyUserPolicyType 1.3.6.1.4.1.3085.3.1.4.2.1.2.12.1.3
The type of policy: import: import route policy export: export route policy vpn-access: Access policy used by a bGP-peer when a Customer VR requests a join operation.
OBJECT-TYPE    
  INTEGER other(1), import(2), export(3), vpnAccess(4)  

csRtPolicyUserPolicyString 1.3.6.1.4.1.3085.3.1.4.2.1.2.12.1.4
The list of policy names. Policies are evaluated in the order of thier apperiance in the list. This string could be a logical expression of polices if supported.
OBJECT-TYPE    
  DisplayString SIZE(0..254)  

csRtPolicyUserRowStatus 1.3.6.1.4.1.3085.3.1.4.2.1.2.12.1.5
The RowStatus object for this table. This is used to add & remove rows from this table.
OBJECT-TYPE    
  RowStatus  

csRtgPolicyEnd 1.3.6.1.4.1.3085.3.1.4.2.1.2.13
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionPing 1.3.6.1.4.1.3085.3.1.4.2.1.3
OBJECT IDENTIFIER    

csOrionPingCtl 1.3.6.1.4.1.3085.3.1.4.2.1.3.1
OBJECT IDENTIFIER    

csOrionPingCtlTable 1.3.6.1.4.1.3085.3.1.4.2.1.3.1.1
Defines the ping Control Table for provide, via SNMP, the capability of performing ping operations at a remote host. The results of these operations are stored in the csOrionPingResultsTable.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionPingCtlEntry

csOrionPingCtlEntry 1.3.6.1.4.1.3085.3.1.4.2.1.3.1.1.1
Defines an entry in the csOrionPingCtlTable. The 3rd index, csOrionPingCtlTestName, must have the following format when used for Tunnel Keepalives: TUNNEL vi-id.
OBJECT-TYPE    
  CsOrionPingCtlEntry  

csOrionPingCtlTestName 1.3.6.1.4.1.3085.3.1.4.2.1.3.1.1.1.1
The name of the ping test. This is locally unique, within the scope of a Virtual Router. This must have the following format when used for Tunnel Keepalives: TUNNEL vi-id
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionPingCtlTargetAddress 1.3.6.1.4.1.3085.3.1.4.2.1.3.1.1.1.2
Specifies the host address to be used at a remote host for performing a ping operation. A value for this object MUST be set prior to transitioning its corresponding csOrionPingCtlEntry to active(1) via csOrionPingCtlRowStatus.
OBJECT-TYPE    
  IpAddress  

csOrionPingCtlTimeOut 1.3.6.1.4.1.3085.3.1.4.2.1.3.1.1.1.3
Specifies the time-out value, in seconds, for a remote ping operation.
OBJECT-TYPE    
  Unsigned32 1..60  

csOrionPingCtlProbeCount 1.3.6.1.4.1.3085.3.1.4.2.1.3.1.1.1.4
Specifies the number of times to perform a ping operation at a remote host.
OBJECT-TYPE    
  Unsigned32 1..15  

csOrionPingCtlAdminStatus 1.3.6.1.4.1.3085.3.1.4.2.1.3.1.1.1.5
Reflects the desired state that a csOrionPingCtlEntry should be in: enabled(1) - Attempt to activate the test as defined by this csOrionPingCtlEntry. disabled(2) - Deactivate the test as defined by this csOrionPingCtlEntry. Refer to the corresponding csOrionPingResultsOperStatus to determine the operational state of the test defined by this entry.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

csOrionPingCtlFrequency 1.3.6.1.4.1.3085.3.1.4.2.1.3.1.1.1.6
The number of seconds to wait before repeating a ping test as defined by the value of the various objects in the corresponding row. A single ping test consists of a series of ping probes. The number of probes is determined by the value of the corresponding csOrionPingCtlProbeCount object. After a single test completes the number of seconds as defined by the value of csOrionPingCtlFrequency MUST elapse before the next ping test is started. A value of 0 for this object implies that the test as defined by the corresponding entry will not be repeated.
OBJECT-TYPE    
  Unsigned32  

csOrionPingCtlTrapFilter 1.3.6.1.4.1.3085.3.1.4.2.1.3.1.1.1.7
The value of this object is used to determine when a Ping Test fails. If the number of unanswered Ping requests within a test is greater that the value of this object within, then the test has failed.
OBJECT-TYPE    
  Unsigned32 0..15  

csOrionPingCtlRowStatus 1.3.6.1.4.1.3085.3.1.4.2.1.3.1.1.1.8
This object allows entries to be created and deleted in the csOrionPingCtlTable. Deletion of an entry in this table results in all corresponding (same csOrionPingCtlTestName index values) csOrionPingResultsTable entries being deleted. A value MUST be specified for csOrionPingCtlTargetAddress prior to a transition to active(1) state being accepted. This object only supports the createAndGo method of row creation. Remove an entry in this table by setting its RowStatus object to destroy(6).
OBJECT-TYPE    
  RowStatus  

csOrionPingCtlSourceAddress 1.3.6.1.4.1.3085.3.1.4.2.1.3.1.1.1.9
Specifies the Source IP address to be used when performing a ping operation. If this object has the value 0.0.0.0, the Source IP Address will be determined automatically by the IP layer.
OBJECT-TYPE    
  IpAddress  

csOrionPingCtlLength 1.3.6.1.4.1.3085.3.1.4.2.1.3.1.1.1.10
Specifies the length of the data portion of the ICMP Echo Request packet.
OBJECT-TYPE    
  Unsigned32 1..1600  

csOrionPingCtlTtl 1.3.6.1.4.1.3085.3.1.4.2.1.3.1.1.1.11
Specifies the Time-To-Live value used in the IP Header when performing a ping operation. Note, if this object has the value 0, the IP layer will set the TTL value to its default.
OBJECT-TYPE    
  Unsigned32 0..255  

csOrionPingResults 1.3.6.1.4.1.3085.3.1.4.2.1.3.2
OBJECT IDENTIFIER    

csOrionPingResultsTable 1.3.6.1.4.1.3085.3.1.4.2.1.3.2.2
Defines the Ping Results Table for providing the capability of performing ping operations at a remote host. The results of these operations are stored in the csOrionPingResultsTable and the pingPastProbeTable. An entry is added to the csOrionPingResultsTable when an csOrionPingCtlEntry is started by successful transition of its csOrionPingCtlAdminStatus object to enabled(1). An entry is removed from the csOrionPingResultsTable when its corresponding csOrionPingCtlEntry is deleted.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionPingResultsEntry

csOrionPingResultsEntry 1.3.6.1.4.1.3085.3.1.4.2.1.3.2.2.1
Defines an entry in the csOrionPingResultsTable. The csOrionPingResultsTable has the same indexing as the csOrionPingCtlTable in order for a csOrionPingResultsEntry to correspond to the csOrionPingCtlEntry that caused it to be created.
OBJECT-TYPE    
  CsOrionPingResultsEntry  

csOrionPingResultsIpTargetAddress 1.3.6.1.4.1.3085.3.1.4.2.1.3.2.2.1.1
This objects reports the IP address associated with a csOrionPingCtlTargetAddress.
OBJECT-TYPE    
  IpAddress  

csOrionPingResultsMinRtt 1.3.6.1.4.1.3085.3.1.4.2.1.3.2.2.1.2
The minimum ping round-trip-time (RTT) received.
OBJECT-TYPE    
  Unsigned32  

csOrionPingResultsMaxRtt 1.3.6.1.4.1.3085.3.1.4.2.1.3.2.2.1.3
The maximum ping round-trip-time (RTT) received.
OBJECT-TYPE    
  Unsigned32  

csOrionPingResultsAverageRtt 1.3.6.1.4.1.3085.3.1.4.2.1.3.2.2.1.4
The current average ping round-trip-time (RTT).
OBJECT-TYPE    
  Unsigned32  

csOrionPingResultsProbeResponses 1.3.6.1.4.1.3085.3.1.4.2.1.3.2.2.1.5
Number of responses received for the corresponding csOrionPingCtlEntry and csOrionPingResultsEntry. The value of this object MUST be reported as 0 when no probe responses have been received.
OBJECT-TYPE    
  Counter32  

csOrionPingResultsSentProbes 1.3.6.1.4.1.3085.3.1.4.2.1.3.2.2.1.6
The value of this object reflects the number of probes sent for the corresponding csOrionPingCtlEntry and csOrionPingResultsEntry. The value of this object MUST be reported as 0 when no probes have been sent.
OBJECT-TYPE    
  Counter32  

csOrionPingResultsErrors 1.3.6.1.4.1.3085.3.1.4.2.1.3.2.2.1.7
The value of this object reflects the number of times errors were encountered while attempting to send a probe.
OBJECT-TYPE    
  Counter32  

csOrionPingResultsTimeOuts 1.3.6.1.4.1.3085.3.1.4.2.1.3.2.2.1.8
The value of this object reflects the number of times a probe was sent and more than csOrionPingCtlTimeOut seconds was spent waiting for the response.
OBJECT-TYPE    
  Counter32  

csOrionPingResultsLates 1.3.6.1.4.1.3085.3.1.4.2.1.3.2.2.1.9
The value of this object reflects the number of times a probe was sent and a response was received more than csOrionPingCtlTimeOut seconds later. Note, responses that are marked 'late' are not reflected in the csOrionPingCtlTimeOut counter.
OBJECT-TYPE    
  Counter32  

csOrionPingResultsUnreachables 1.3.6.1.4.1.3085.3.1.4.2.1.3.2.2.1.10
The value of this object reflects the number of times a probe was sent and an ICMP Destination Unreachable message was received.
OBJECT-TYPE    
  Counter32  

csOrionPingResultsCurrentStatus 1.3.6.1.4.1.3085.3.1.4.2.1.3.2.2.1.11
This object has the results of the most recently completed ping test. If no test has yet been completed, this object will have the value: unknown(1).
OBJECT-TYPE    
  INTEGER successful(1), failed(2), unknown(3)  

csOrionPingEnd 1.3.6.1.4.1.3085.3.1.4.2.1.3.3
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionTraceRoute 1.3.6.1.4.1.3085.3.1.4.2.1.4
OBJECT IDENTIFIER    

csOrionTraceRouteReqTable 1.3.6.1.4.1.3085.3.1.4.2.1.4.1
Trace Route Request Table.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionTraceRouteReqEntry

csOrionTraceRouteReqEntry 1.3.6.1.4.1.3085.3.1.4.2.1.4.1.1
An entry of Trace Route Request Table.
OBJECT-TYPE    
  CsOrionTraceRouteReqEntry  

csOrionTraceRouteReqIndex 1.3.6.1.4.1.3085.3.1.4.2.1.4.1.1.1
This object identifies a specific Trace Route request entry. NMSs are expected to come up with a unique ID each request. This ID will also be used to index the Trace Route result entry.
OBJECT-TYPE    
  Integer32 1..2147483647  

csOrionTraceRouteReqDestAddr 1.3.6.1.4.1.3085.3.1.4.2.1.4.1.1.2
The destination host for the Trace Route operation. Must be set for request to be processed.
OBJECT-TYPE    
  IpAddress  

csOrionTraceRouteReqHops 1.3.6.1.4.1.3085.3.1.4.2.1.4.1.1.3
Maximum number of hops to reach destination host.
OBJECT-TYPE    
  Integer32 1..65535  

csOrionTraceRouteReqSrcAddr 1.3.6.1.4.1.3085.3.1.4.2.1.4.1.1.4
The source host for the Trace Route operation.
OBJECT-TYPE    
  IpAddress  

csOrionTraceRouteReqStatus 1.3.6.1.4.1.3085.3.1.4.2.1.4.1.1.5
This object is used to store the status of the Trace Route request. operation. The csOrionTraceRouteResultTable should only be evaluated after this object yields opSuccess(3).
OBJECT-TYPE    
  INTEGER none(1), opInProgress(2), opSuccess(3), opFailed(4)  

csOrionTraceRouteReqRowStatus 1.3.6.1.4.1.3085.3.1.4.2.1.4.1.1.6
The RowStatus object for this table. This is used to add/delete rows from this table.
OBJECT-TYPE    
  RowStatus  

csOrionTraceRouteResultTable 1.3.6.1.4.1.3085.3.1.4.2.1.4.2
Trace Route Result Table. The object csOrionTraceRouteReqStatus should be evaluated before obtaing the results from this table.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionTraceRouteResultEntry

csOrionTraceRouteResultEntry 1.3.6.1.4.1.3085.3.1.4.2.1.4.2.1
An entry of Trace Route Result Table. Each hop taken during the trace route operation corresponds to an entry in csOrionTraceRouteResultEntry. Additional 'getnext' is expected to obtain the succeeding hops. We will add objects in this table as we expose more trace route info.
OBJECT-TYPE    
  CsOrionTraceRouteResultEntry  

csOrionTraceRouteResultIndex 1.3.6.1.4.1.3085.3.1.4.2.1.4.2.1.1
This object identifies a specific File System result entry. This index corresponds to the ID provided by NMSs on File System request.
OBJECT-TYPE    
  Integer32 1..2147483647  

csOrionTraceRouteResultHopNum 1.3.6.1.4.1.3085.3.1.4.2.1.4.2.1.2
Hop number for this result.
OBJECT-TYPE    
  Integer32 1..65535  

csOrionTraceRouteResultRtt1 1.3.6.1.4.1.3085.3.1.4.2.1.4.2.1.3
This is the round trip time for the 1st probe on this hop.
OBJECT-TYPE    
  Integer32 -1..65535  

csOrionTraceRouteResultRtt2 1.3.6.1.4.1.3085.3.1.4.2.1.4.2.1.4
This is the round trip time for the 2nd probe on this hop.
OBJECT-TYPE    
  Integer32 -1..65535  

csOrionTraceRouteResultRtt3 1.3.6.1.4.1.3085.3.1.4.2.1.4.2.1.5
This is the round trip time for the 3rd probe on this hop.
OBJECT-TYPE    
  Integer32 -1..65535  

csOrionTraceRouteResultHopAddr 1.3.6.1.4.1.3085.3.1.4.2.1.4.2.1.6
The host address of this hop.
OBJECT-TYPE    
  IpAddress  

csOrionTraceRouteResultMplsLabelStackInfo 1.3.6.1.4.1.3085.3.1.4.2.1.4.2.1.7
Returns mpls label stack information that was encoded in the icmp error message. The values returned in this string are formatted to include mpls-label, exp-bits, s-bit, and ttl values for the entire label stack. If the router generating icmp message does not support icmp extensions for mpls, then this string will not contain any information (null string)
OBJECT-TYPE    
  OCTET STRING SIZE(0..100)  

csOrionTraceRouteEnd 1.3.6.1.4.1.3085.3.1.4.2.1.4.3
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionVIfInfo 1.3.6.1.4.1.3085.3.1.4.2.2
OBJECT IDENTIFIER    

csOrionVIfaceTable 1.3.6.1.4.1.3085.3.1.4.2.2.1
A list of Virtual Interfaces, configured for the Virtual Router.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionVIfaceEntry

csOrionVIfaceEntry 1.3.6.1.4.1.3085.3.1.4.2.2.1.1
An entry containing management information applicable to a particular virtual router, configured for the VPN.
OBJECT-TYPE    
  CsOrionVIfaceEntry  

csOrionVIfIndex 1.3.6.1.4.1.3085.3.1.4.2.2.1.1.1
A unique value, greater than zero, for each VPN Virtual Interface.
OBJECT-TYPE    
  Integer32 1..64000  

csOrionVIfRemoteEnd 1.3.6.1.4.1.3085.3.1.4.2.2.1.1.4
This object is used to identify the entity to which this Virtual Interface maps. That is, the remote end of this Virtual Interface. The format used for this ascii-string valued object is as follows: 'V|L VPNID|SlotID/VRID|PortID/VIID|LLID' Where 'V' indicates the other end of this Virtual Interface is another Virtual Interface. 'L' indicates this Virtual Interface maps to a Logical Link. 'VPNID' is a Virtual Private Network ID. 'SlotID' identifies a specific slot on the Orion Box. 'VRID' is a Virtual Router ID for the VPN specified by VPNID. 'PortID' identifies a specific Port on the blade installed in the previously identified slot. 'VIID' is a Virtual Interface on the VR identified by VRID. 'LLID' is a Logical Link ID on PortID. For example, if this Virtual Interface maps to another Virtual Interface (VI number 1 on VR 1.2.3.4 on VPN 4), this object might be set to this value: 'V 4/1.2.3.4/1' If this Virtual Interface maps to Logical Link 100 on Port 2 of Slot 2, this object might be set to this value: 'L 2/2:100' If this Virtual Interface has not been mapped, this object will have the value 'DISCONNECTED'.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionVIfIpAddress 1.3.6.1.4.1.3085.3.1.4.2.2.1.1.5
The primary IP Address assigned to this Virtual Interface
OBJECT-TYPE    
  IpAddress  

csOrionVIfIpMask 1.3.6.1.4.1.3085.3.1.4.2.2.1.1.6
The primary IP Address Mask assigned to this Virtual Interface
OBJECT-TYPE    
  IpAddress  

csOrionVIfBcastAddr 1.3.6.1.4.1.3085.3.1.4.2.2.1.1.7
The value of the least-significant bit in the IP broadcast address used for sending datagrams on this Virtual Interface. For example, when the Internet standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet and network broadcasts addresses used by the entity on this (logical) interface.
OBJECT-TYPE    
  INTEGER 0..1  

csOrionVIfMtu 1.3.6.1.4.1.3085.3.1.4.2.2.1.1.8
The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface.
OBJECT-TYPE    
  Integer32 20..4470  

csOrionVIfFrameType 1.3.6.1.4.1.3085.3.1.4.2.2.1.1.9
The frame type used on this Virtual Interface.
OBJECT-TYPE    
  INTEGER frameRelay(1), ppp(2), ipSec(3), ethernet(4)  

csOrionVIfType 1.3.6.1.4.1.3085.3.1.4.2.2.1.1.10
This indicates whether this Virtual Interface is of type public or private.
OBJECT-TYPE    
  INTEGER public(1), private(2)  

csOrionVIfSpeed 1.3.6.1.4.1.3085.3.1.4.2.2.1.1.11
An estimate of the interface's current bandwidth in bits per second. If the remote end of this Virtual Interface is a Logical Link, the speed is based on the Logical Link's speed and does not need to be configured. If the remote end is another Virtual Interface, the speed is based on SLA agreements and needs to be configured. NOTE: This object is currently not supported and will always contain the value 0.
OBJECT-TYPE    
  Gauge32  

csOrionVIfLastChange 1.3.6.1.4.1.3085.3.1.4.2.2.1.1.12
The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization of the local network management subsystem, then this object contains a zero value.
OBJECT-TYPE    
  TimeTicks  

csOrionVIfCryptoMapName 1.3.6.1.4.1.3085.3.1.4.2.2.1.1.13
A Crypto Map name for the Virtual Interface.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionVIfRowStatus 1.3.6.1.4.1.3085.3.1.4.2.2.1.1.14
A row status type for the Virtual Interface.
OBJECT-TYPE    
  RowStatus  

csOrionVIfOperStatus 1.3.6.1.4.1.3085.3.1.4.2.2.1.1.15
A operational status for the Virtual Iface.
OBJECT-TYPE    
  OperStatus  

csOrionVIfRateLimitNumBytes 1.3.6.1.4.1.3085.3.1.4.2.2.1.1.16
The number of bytes that may be forwarded on this interface in the interval specified by 'csOrionVIfRateLimitInterval'. A value of 0 indicates that no rate-limiting is done. When this field is specified, 'csOrionVIfRateLimit- Interval' must also be specified.
OBJECT-TYPE    
  Integer32  

csOrionVIfRateLimitInterval 1.3.6.1.4.1.3085.3.1.4.2.2.1.1.17
The interval, in milliseconds, over which the number of bytes forwared over this interface is measured when rate-limiting is being done. The rate-limit interval is always a multiple of 10. This field has no meaning when 'csOrionVIfRate LimitNumBytes' is '0'. When 'csOrionVIfRateLimit- NumBytes' is specified, this field must also be specified.
OBJECT-TYPE    
  Integer32 0..10000  

csOrionVIfRateLimitRate 1.3.6.1.4.1.3085.3.1.4.2.2.1.1.18
Long term data throughput, in bytes per second, that the VI commits to support under normal network conditions.
OBJECT-TYPE    
  Integer32  

csOrionVIfRateLimitBurstSize 1.3.6.1.4.1.3085.3.1.4.2.2.1.1.19
The largest burst of data above the commited rate that will be allowed temporarily by the VI, even if it exceeds the maximum rate. This amount of traffic will be allowed only temporarily; on average, the traffice source need to be within the committed rate.
OBJECT-TYPE    
  Integer32  

csOrionVIfRemIpAddress 1.3.6.1.4.1.3085.3.1.4.2.2.1.1.20
The remote IP Address assigned to this Virtual Interface
OBJECT-TYPE    
  IpAddress  

csOrionVIfRemIpAddressType 1.3.6.1.4.1.3085.3.1.4.2.2.1.1.21
If value is configured, it means csOrionVIfRemIpAddress is configured , else, it is dynamically learned.
OBJECT-TYPE    
  INTEGER other(1), configured(2)  

csOrionVIfMtuOperational 1.3.6.1.4.1.3085.3.1.4.2.2.1.1.22
Operational size of the largest datagram which can be sent/received on the interface, specified in octets.
OBJECT-TYPE    
  Integer32  

csOrionViStatsTable 1.3.6.1.4.1.3085.3.1.4.2.2.2
A list of Virtual Interfaces Statistics
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionViStatsEntry

csOrionViStatsEntry 1.3.6.1.4.1.3085.3.1.4.2.2.2.1
A Set of statistics for a single Virtual Interface.
OBJECT-TYPE    
  CsOrionViStatsEntry  

csOrionViStatsInOctets 1.3.6.1.4.1.3085.3.1.4.2.2.2.1.1
The total number of octets received on the interface, including framing characters.
OBJECT-TYPE    
  Counter64  

csOrionViStatsInUcastPkts 1.3.6.1.4.1.3085.3.1.4.2.2.2.1.2
The number of subnetwork-unicast packets delivered to a higher-layer protocol.
OBJECT-TYPE    
  Counter64  

csOrionViStatsInNUcastPkts 1.3.6.1.4.1.3085.3.1.4.2.2.2.1.3
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a non-unicast address at this sub-layer.
OBJECT-TYPE    
  Counter64  

csOrionViStatsInDiscards 1.3.6.1.4.1.3085.3.1.4.2.2.2.1.4
The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.
OBJECT-TYPE    
  Counter64  

csOrionViStatsInErrors 1.3.6.1.4.1.3085.3.1.4.2.2.2.1.5
The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.
OBJECT-TYPE    
  Counter64  

csOrionViStatsInUnknownProtos 1.3.6.1.4.1.3085.3.1.4.2.2.2.1.6
The number of packets received via the interface which were discarded because of an unknown or unsupported protocol.
OBJECT-TYPE    
  Counter64  

csOrionViStatsOutOctets 1.3.6.1.4.1.3085.3.1.4.2.2.2.1.7
The total number of octets transmitted out of the interface, including framing characters.
OBJECT-TYPE    
  Counter64  

csOrionViStatsOutUcastPkts 1.3.6.1.4.1.3085.3.1.4.2.2.2.1.8
The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.
OBJECT-TYPE    
  Counter64  

csOrionViStatsOutNUcastPkts 1.3.6.1.4.1.3085.3.1.4.2.2.2.1.9
The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a non-unicast address at this sub-layer, including those that were discarded or not sent.
OBJECT-TYPE    
  Counter64  

csOrionViStatsOutDiscards 1.3.6.1.4.1.3085.3.1.4.2.2.2.1.10
The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.
OBJECT-TYPE    
  Counter64  

csOrionViStatsOutErrors 1.3.6.1.4.1.3085.3.1.4.2.2.2.1.11
The number of outbound packets that could not be transmitted because of errors.
OBJECT-TYPE    
  Counter64  

csOrionViStatsRateLimitTxBytesSubmitted 1.3.6.1.4.1.3085.3.1.4.2.2.2.1.12
When rate limiting is enabled, the number of transmit bytes submitted...
OBJECT-TYPE    
  Counter64  

csOrionViStatsRateLimitTxPktsSubmitted 1.3.6.1.4.1.3085.3.1.4.2.2.2.1.13
When rate limiting is enabled, the number of transmit packets submitted...
OBJECT-TYPE    
  Counter64  

csOrionViStatsRateLimitTxBytesDropped 1.3.6.1.4.1.3085.3.1.4.2.2.2.1.14
When rate limiting is enabled, the number of transmit bytes dropped...
OBJECT-TYPE    
  Counter64  

csOrionViStatsRateLimitTxPktsDropped 1.3.6.1.4.1.3085.3.1.4.2.2.2.1.15
When rate limiting is enabled, the number of transmit packets dropped...
OBJECT-TYPE    
  Counter64  

csOrionViStatsRateLimitRxBytesSubmitted 1.3.6.1.4.1.3085.3.1.4.2.2.2.1.16
When rate limiting is enabled, the number of receive packets submitted...
OBJECT-TYPE    
  Counter64  

csOrionViStatsRateLimitRxPktsSubmitted 1.3.6.1.4.1.3085.3.1.4.2.2.2.1.17
When rate limiting is enabled, the number of receive packets submitted...
OBJECT-TYPE    
  Counter64  

csOrionViStatsRateLimitRxBytesDropped 1.3.6.1.4.1.3085.3.1.4.2.2.2.1.18
When rate limiting is enabled, the number of receive packets dropped...
OBJECT-TYPE    
  Counter64  

csOrionViStatsRateLimitRxPktsDropped 1.3.6.1.4.1.3085.3.1.4.2.2.2.1.19
When rate limiting is enabled, the number of receive packets dropped...
OBJECT-TYPE    
  Counter64  

csOrionViStatsRateLimitTimeElapsed 1.3.6.1.4.1.3085.3.1.4.2.2.2.1.20
The number of seconds that have elapsed since the beginning of the current rate-limiting measurement period.
OBJECT-TYPE    
  Counter64  

csOrionGreConfigTable 1.3.6.1.4.1.3085.3.1.4.2.2.3
The GRE Tunneling configuration table.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionGreConfigEntry

csOrionGreConfigEntry 1.3.6.1.4.1.3085.3.1.4.2.2.3.1
An entry containing configuration information applicable to a GRE Tunnel associated with this Virtual Interface.
OBJECT-TYPE    
  CsOrionGreConfigEntry  

csOrionGreKeyEnable 1.3.6.1.4.1.3085.3.1.4.2.2.3.1.1
This object is used to enable/disable the GRE Key. When this object is disable, csOrionGreKey has no meaning
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOrionGreKey 1.3.6.1.4.1.3085.3.1.4.2.2.3.1.2
The value of a key carried in the GRE header.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

csOrionGreSequence 1.3.6.1.4.1.3085.3.1.4.2.2.3.1.3
This object is used to enable/disable the sequencing info carried in a GRE header.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOrionGreCheckSum 1.3.6.1.4.1.3085.3.1.4.2.2.3.1.4
This object is used to enable/disable the checksum mechanism for this GRE Tunnel.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOrionGreAdminStatus 1.3.6.1.4.1.3085.3.1.4.2.2.3.1.5
This object controls whether the GRE Tunnel is to be created or not.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOrionGreStatsTable 1.3.6.1.4.1.3085.3.1.4.2.2.4
The GRE Tunneling Statistics table.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionGreStatsEntry

csOrionGreStatsEntry 1.3.6.1.4.1.3085.3.1.4.2.2.4.1
An entry containing statistics information applicable to a GRE Tunnel associated with this Virtual Interface.
OBJECT-TYPE    
  CsOrionGreStatsEntry  

csOrionGreStatsKeyErrors 1.3.6.1.4.1.3085.3.1.4.2.2.4.1.1
The total number of packets with GRE Key errors received on this GRE tunnel.
OBJECT-TYPE    
  Counter32  

csOrionGreStatsSequenceErrors 1.3.6.1.4.1.3085.3.1.4.2.2.4.1.2
The total number of packets with out of sequence received on this GRE tunnel.
OBJECT-TYPE    
  Counter32  

csOrionGreStatsUnknownProto 1.3.6.1.4.1.3085.3.1.4.2.2.4.1.3
The number of packets with unknown protocols received on this GRE tunnel.
OBJECT-TYPE    
  Counter32  

csOrionGreStatsHeaderErrors 1.3.6.1.4.1.3085.3.1.4.2.2.4.1.4
The total number of packets with header error received on this GRE tunnel.
OBJECT-TYPE    
  Counter32  

csDot1dBaseBridgeTable 1.3.6.1.4.1.3085.3.1.4.2.2.5
A list of Virtual Bridges, configured for the Virtual Router.
OBJECT-TYPE    
  SEQUENCE OF  
    CsDot1dBaseBridgeEntry

csDot1dBaseBridgeEntry 1.3.6.1.4.1.3085.3.1.4.2.2.5.1
An entry containing information applicable to a bridged VI of a VR.
OBJECT-TYPE    
  CsDot1dBaseBridgeEntry  

csDot1dBaseBridgeAddress 1.3.6.1.4.1.3085.3.1.4.2.2.5.1.1
The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong to this. However it is only required to be unique. When concatenated with dot1dStpPriority a unique BridgeIdentifier is formed which is used in the Spanning Tree Protocol. Note: This is used as the MAC address for this VB.
OBJECT-TYPE    
  MacAddress  

csDot1dBaseNumPorts 1.3.6.1.4.1.3085.3.1.4.2.2.5.1.2
The number of ports controlled by this bridging entity.
OBJECT-TYPE    
  INTEGER 0..65535  

csDot1dTpLearnedEntryDiscards 1.3.6.1.4.1.3085.3.1.4.2.2.5.1.3
The total number of Forwarding Database entries, which have been or would have been learnt, but have been discarded due to a lack of space to store them in the Forwarding Database. If this counter is increasing, it indicates that the Forwarding Database is regularly becoming full (a condition which has unpleasant performance effects on the subnetwork). If this counter has a significant value but is not presently increasing, it indicates that the problem has been occurring but is not persistent.
OBJECT-TYPE    
  Counter32  

csDot1dTpAgingTime 1.3.6.1.4.1.3085.3.1.4.2.2.5.1.4
The timeout period in seconds for aging out dynamically learned forwarding information. 802.1D-1990 recommends a default of 300 seconds.
OBJECT-TYPE    
  INTEGER 10..1000000  

csDot1dBaseBridgeEntryRowStatus 1.3.6.1.4.1.3085.3.1.4.2.2.5.1.5
A row status type for the csDot1dBaseBridge Table.
OBJECT-TYPE    
  RowStatus  

csDot1dTpFdbTable 1.3.6.1.4.1.3085.3.1.4.2.2.6
A table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame.
OBJECT-TYPE    
  SEQUENCE OF  
    CsDot1dTpFdbEntry

csDot1dTpFdbEntry 1.3.6.1.4.1.3085.3.1.4.2.2.6.1
Information about a specific unicast MAC address for which the bridge has some forwarding and/or filtering information.
OBJECT-TYPE    
  CsDot1dTpFdbEntry  

csDot1dTpFdbAddress 1.3.6.1.4.1.3085.3.1.4.2.2.6.1.1
A unicast MAC address for which the bridge has forwarding and/or filtering information.
OBJECT-TYPE    
  MacAddress  

csDot1dTpFdbPort 1.3.6.1.4.1.3085.3.1.4.2.2.6.1.2
Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of dot1dTpFdbAddress has been seen. A value of '0' indicates that the port number has not been learned but that the bridge does have some forwarding/filtering information about this address (e.g. in the dot1dStaticTable). Implementors are encouraged to assign the port to this object whenever it is learned even addresses for which the corresponding value of dot1dTpFdbStatus is not learned(3).
OBJECT-TYPE    
  INTEGER 0..65535  

csDot1dTpFdbSubPort 1.3.6.1.4.1.3085.3.1.4.2.2.6.1.3
Either the value '0', or the port number of the subport on which a frame having a source address equal to the value of the corresponding instance of dot1dTpFdbAddress has been seen.
OBJECT-TYPE    
  INTEGER 0..65535  

csDot1dTpFdbStatus 1.3.6.1.4.1.3085.3.1.4.2.2.6.1.4
The status of this entry. The meanings of the values are: other(1) : none of the following. This would include the case where some other MIB object (not the corresponding instance of dot1dTpFdbPort, nor an entry in the dot1dStaticTable) is being used to determine if and how frames addressed to the value of the corresponding instance of dot1dTpFdbAddress are being forwarded. invalid(2) : this entry is not longer valid (e.g., it was learned but has since aged-out), but has not yet been flushed from the table. learned(3) : the value of the corresponding instance of dot1dTpFdbPort was learned, and is being used. self(4) : the value of the corresponding instance of dot1dTpFdbAddress one of the bridge's addresses. The corresponding instance of dot1dTpFdbPort indicates which of the bridge's ports has this address. mgmt(5) : the value of the corresponding instance of dot1dTpFdbAddress is also the value of an existing instance of dot1dStaticAddress.
OBJECT-TYPE    
  INTEGER other(1), invalid(2), learned(3), self(4), mgmt(5)  

csDot1dPortTable 1.3.6.1.4.1.3085.3.1.4.2.2.7
.
OBJECT-TYPE    
  SEQUENCE OF  
    CsDot1dPortEntry

csDot1dPortEntry 1.3.6.1.4.1.3085.3.1.4.2.2.7.1
Information about a specific unicast MAC address for which the bridge has some forwarding and (or) filtering information.
OBJECT-TYPE    
  CsDot1dPortEntry  

csDot1dPortIndex 1.3.6.1.4.1.3085.3.1.4.2.2.7.1.1
.
OBJECT-TYPE    
  INTEGER 1..65535  

csDot1dPortRemoteEnd 1.3.6.1.4.1.3085.3.1.4.2.2.7.1.2
This object is used to identify the entity to which this Virtual Interface maps. That is, the remote end of this Virtual Interface. The format used for this ascii-string valued object is as follows: 'V|L|P|T VPNID|SlotID/VRID|PortID/VIID/ConnID/TLSID|LLID' Where 'V' indicates the other end of this Virtual Interface is another Virtual Interface. 'L' indicates this Virtual Interface maps to a Logical Link. æPÆ indicates pseudo wire. æTÆ indicates TLS. 'VPNID' is a Virtual Private Network ID. 'SlotID' identifies a specific slot on the Orion Box. 'VRID' is a Virtual Router ID for the VPN specified by VPNID. 'PortID' identifies a specific Port on the blade installed in the previously identified slot. 'VIID' is a Virtual Interface on the VR identified by VRID. æConnIDÆ refers to pseudo wire connection ID. æTLSIDÆ refers to the TLS domain ID for pseudo wires. 'LLID' is a Logical Link ID on PortID. For example, if this Virtual Interface maps to another Virtual Interface (VI number 1 on VR 1.2.3.4 on VPN 4), this object might be set to this value: 'V 4/1.2.3.4/1' If this Virtual Interface maps to Logical Link 100 on Port 2 of Slot 2, this object might be set to this value: 'L 2/2:100' If this Virtual Interface maps to pseudo wire 100 on VPN 4 VR 1.2.3.4: æP 4/1.2.3.4/100Æ If this Virtual Interface maps to TLS 100 on VPN 4 VR 1.2.3.4: æT 4/1.2.3.4/100Æ
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csDot1dPortType 1.3.6.1.4.1.3085.3.1.4.2.2.7.1.3
.
OBJECT-TYPE    
  INTEGER li(1), pw(2), tls(3)  

csDot1dPortStatus 1.3.6.1.4.1.3085.3.1.4.2.2.7.1.4
.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

csDot1dPortEntryRowStatus 1.3.6.1.4.1.3085.3.1.4.2.2.7.1.5
.
OBJECT-TYPE    
  RowStatus  

csOrionIp 1.3.6.1.4.1.3085.3.1.4.2.3
OBJECT IDENTIFIER    

csOrionVPNVRouterIpStatsTable 1.3.6.1.4.1.3085.3.1.4.2.3.1
The table of IP related statistics for each Virtual Router.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionVPNVRouterIpStatsEntry

csOrionVPNVRouterIpStatsEntry 1.3.6.1.4.1.3085.3.1.4.2.3.1.1
The addressing information for one of this Orion's IP addresses.
OBJECT-TYPE    
  CsOrionVPNVRouterIpStatsEntry  

csOrionVPNVRouterIpInReceives 1.3.6.1.4.1.3085.3.1.4.2.3.1.1.1
The total number of input datagrams received from interfaces, including those received in error.
OBJECT-TYPE    
  Counter64  

csOrionVPNVRouterIpInHdrErrors 1.3.6.1.4.1.3085.3.1.4.2.3.1.1.2
The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IP options, etc.
OBJECT-TYPE    
  Counter64  

csOrionVPNVRouterIpInAddrErrors 1.3.6.1.4.1.3085.3.1.4.2.3.1.1.3
The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. This count includes invalid addresses (e.g., 0.0.0.0) and addresses of unsupported Classes (e.g., Class E). For entities which are not IP Gateways and therefore do not forward datagrams, this counter includes datagrams discarded because the destination address was not a local address.
OBJECT-TYPE    
  Counter64  

csOrionVPNVRouterIpForwDatagrams 1.3.6.1.4.1.3085.3.1.4.2.3.1.1.4
The number of input datagrams for which this entity was not their final IP destination, as a result of which an attempt was made to find a route to forward them to that final destination. In entities which do not act as IP Gateways, this Counter32 will include only those packets which were Source-Routed via this entity, and the Source- Route option processing was successful.
OBJECT-TYPE    
  Counter64  

csOrionVPNVRouterIpInUnknownProtos 1.3.6.1.4.1.3085.3.1.4.2.3.1.1.5
The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol.
OBJECT-TYPE    
  Counter64  

csOrionVPNVRouterIpInDiscards 1.3.6.1.4.1.3085.3.1.4.2.3.1.1.6
The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buffer space). Note that this counter does not include any datagrams discarded while awaiting re-assembly.
OBJECT-TYPE    
  Counter64  

csOrionVPNVRouterIpInDelivers 1.3.6.1.4.1.3085.3.1.4.2.3.1.1.7
The total number of input datagrams successfully delivered to IP user-protocols (including ICMP).
OBJECT-TYPE    
  Counter64  

csOrionVPNVRouterIpOutRequests 1.3.6.1.4.1.3085.3.1.4.2.3.1.1.8
The total number of IP datagrams which local IP user-protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in ipForwDatagrams.
OBJECT-TYPE    
  Counter64  

csOrionVPNVRouterIpOutDiscards 1.3.6.1.4.1.3085.3.1.4.2.3.1.1.9
The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for lack of buffer space). Note that this counter would include datagrams counted in ipForwDatagrams if any such packets met this (discretionary) discard criterion.
OBJECT-TYPE    
  Counter64  

csOrionVPNVRouterIpOutNoRoutes 1.3.6.1.4.1.3085.3.1.4.2.3.1.1.10
The number of IP datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets counted in ipForwDatagrams which meet this `no-route' criterion. Note that this includes any datagarms which a host cannot route because all of its default gateways are down.
OBJECT-TYPE    
  Counter64  

csOrionVPNVRouterIpReasmReqds 1.3.6.1.4.1.3085.3.1.4.2.3.1.1.11
The number of IP fragments received which needed to be reassembled at this entity.
OBJECT-TYPE    
  Counter64  

csOrionVPNVRouterIpReasmOKs 1.3.6.1.4.1.3085.3.1.4.2.3.1.1.12
The number of IP datagrams successfully re- assembled.
OBJECT-TYPE    
  Counter64  

csOrionVPNVRouterIpReasmFails 1.3.6.1.4.1.3085.3.1.4.2.3.1.1.13
The number of failures detected by the IP re- assembly algorithm (for whatever reason: timed out, errors, etc). Note that this is not necessarily a count of discarded IP fragments since some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received.
OBJECT-TYPE    
  Counter64  

csOrionVPNVRouterIpFragOKs 1.3.6.1.4.1.3085.3.1.4.2.3.1.1.14
The number of IP datagrams that have been successfully fragmented at this entity.
OBJECT-TYPE    
  Counter64  

csOrionVPNVRouterIpFragFails 1.3.6.1.4.1.3085.3.1.4.2.3.1.1.15
The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be, e.g., because their Don't Fragment flag was set.
OBJECT-TYPE    
  Counter64  

csOrionVPNVRouterIpFragCreates 1.3.6.1.4.1.3085.3.1.4.2.3.1.1.16
The number of IP datagram fragments that have been generated as a result of fragmentation at this entity.
OBJECT-TYPE    
  Counter64  

csOrionVPNVRouterIpAddrTable 1.3.6.1.4.1.3085.3.1.4.2.3.2
The table of addressing information relevant to Orion's IP addresses.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionVPNVRouterIpAddrEntry

csOrionVPNVRouterIpAddrEntry 1.3.6.1.4.1.3085.3.1.4.2.3.2.1
The addressing information for one of this Orion's IP addresses.
OBJECT-TYPE    
  CsOrionVPNVRouterIpAddrEntry  

csOrionVPNVRouterIpAdEntAddr 1.3.6.1.4.1.3085.3.1.4.2.3.2.1.1
The IP address to which this entry's addressing information pertains.
OBJECT-TYPE    
  IpAddress  

csOrionVPNVRouterIpAdEntIfIndex 1.3.6.1.4.1.3085.3.1.4.2.3.2.1.2
The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
OBJECT-TYPE    
  Integer32  

csOrionVPNVRouterIpAdEntNetMask 1.3.6.1.4.1.3085.3.1.4.2.3.2.1.3
The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
OBJECT-TYPE    
  IpAddress  

csOrionVPNVRouterIpAdEntBcastAddr 1.3.6.1.4.1.3085.3.1.4.2.3.2.1.4
The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. For example, when the Internet standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet and network broadcasts addresses used by the entity on this (logical) interface.
OBJECT-TYPE    
  Integer32  

csOrionVPNVRouterIpAdEntReasmMaxSize 1.3.6.1.4.1.3085.3.1.4.2.3.2.1.5
The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface.
OBJECT-TYPE    
  Integer32 0..65535  

csOrionVPNVRouterIpAdEntRowStatus 1.3.6.1.4.1.3085.3.1.4.2.3.2.1.6
This object is used to add a row to the IP address table.
OBJECT-TYPE    
  RowStatus  

csOrionVPNVRouterIpAdEntOperStatus 1.3.6.1.4.1.3085.3.1.4.2.3.2.1.7
This object is used to get the current operational status of this row in the IP address table.
OBJECT-TYPE    
  OperStatus  

csOrionVPNVRouterIpRouteTable 1.3.6.1.4.1.3085.3.1.4.2.3.3
The table of addressing information relevant to Orion's IP addresses.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionVPNVRouterIpRouteEntry

csOrionVPNVRouterIpRouteEntry 1.3.6.1.4.1.3085.3.1.4.2.3.3.1
The addressing information for one of this Orion's IP addresses.
OBJECT-TYPE    
  CsOrionVPNVRouterIpRouteEntry  

csOrionVPNVRouterIpRouteDest 1.3.6.1.4.1.3085.3.1.4.2.3.3.1.1
The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table- access mechanisms defined by the network management protocol in use.
OBJECT-TYPE    
  IpAddress  

csOrionVPNVRouterIpRouteMask 1.3.6.1.4.1.3085.3.1.4.2.3.3.1.2
Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the csOrionVPNVRouterIpRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the csOrionVPNVRouterIpRouteMask by determining whether the value of the correspondent csOrionVPNVRouterIpRouteDest field belong to a class-A, B, or C network, and then using one of: mask network 255.0.0.0 class-A 255.255.0.0 class-B 255.255.255.0 class-C If the value of the csOrionVPNVRouterIpRouteDest is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism.
OBJECT-TYPE    
  IpAddress  

csOrionVPNVRouterIpRouteTos 1.3.6.1.4.1.3085.3.1.4.2.3.3.1.3
The policy specifier is the IP TOS Field. The encoding of IP TOS is as specified by the following convention. Zero indicates the default path if no more specific policy applies. +-----+-----+-----+-----+-----+-----+-----+-----+ | | | | | PRECEDENCE | TYPE OF SERVICE | 0 | | | | | +-----+-----+-----+-----+-----+-----+-----+-----+ IP TOS IP TOS Field Policy Field Policy Contents Code Contents Code 0 0 0 0 ==> 0 0 0 0 1 ==> 2 0 0 1 0 ==> 4 0 0 1 1 ==> 6 0 1 0 0 ==> 8 0 1 0 1 ==> 10 0 1 1 0 ==> 12 0 1 1 1 ==> 14 1 0 0 0 ==> 16 1 0 0 1 ==> 18 1 0 1 0 ==> 20 1 0 1 1 ==> 22 1 1 0 0 ==> 24 1 1 0 1 ==> 26 1 1 1 0 ==> 28 1 1 1 1 ==> 30
OBJECT-TYPE    
  Integer32  

csOrionVPNVRouterIpRouteNextHop 1.3.6.1.4.1.3085.3.1.4.2.3.3.1.4
The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface.)
OBJECT-TYPE    
  IpAddress  

csOrionVPNVRouterIpRouteIfIndex 1.3.6.1.4.1.3085.3.1.4.2.3.3.1.5
The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
OBJECT-TYPE    
  Integer32  

csOrionVPNVRouterIpRouteType 1.3.6.1.4.1.3085.3.1.4.2.3.3.1.6
The type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for which the next hop is not the final destina- tion. Routes which do not result in traffic forwarding or rejection should not be displayed even if the implementation keeps them stored internally. reject (2) refers to a route which, if matched, discards the message as unreachable. This is used in some protocols as a means of correctly aggregating routes.
OBJECT-TYPE    
  INTEGER other(1), reject(2), local(3), remote(4)  

csOrionVPNVRouterIpRouteProto 1.3.6.1.4.1.3085.3.1.4.2.3.3.1.7
The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.
OBJECT-TYPE    
  INTEGER other(1), local(2), netmgmt(3), icmp(4), egp(5), ggp(6), hello(7), rip(8), isIs(9), esIs(10), ciscoIgrp(11), bbnSpfIgp(12), ospf(13), bgp(14), idpr(15), ciscoEigrp(16)  

csOrionVPNVRouterIpRouteAge 1.3.6.1.4.1.3085.3.1.4.2.3.3.1.8
The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned.
OBJECT-TYPE    
  Integer32  

csOrionVPNVRouterIpRouteInfo 1.3.6.1.4.1.3085.3.1.4.2.3.3.1.9
A reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the route's csOrionVPNVRouterIpRouteProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntatically valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

csOrionVPNVRouterIpRouteNextHopAS 1.3.6.1.4.1.3085.3.1.4.2.3.3.1.10
The Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing-protocol specified in the route's ipCidrRouteProto value. When this object is unknown or not relevant its value should be set to zero.
OBJECT-TYPE    
  Integer32  

csOrionVPNVRouterIpRouteMetric1 1.3.6.1.4.1.3085.3.1.4.2.3.3.1.11
The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's csOrionVPNVRouterIpRouteProto value. If this metric is not used, its value should be set to -1.
OBJECT-TYPE    
  Integer32  

csOrionVPNVRouterIpRouteMetric2 1.3.6.1.4.1.3085.3.1.4.2.3.3.1.12
An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's csOrionVPNVRouterIpRouteProto value. If this metric is not used, its value should be set to -1.
OBJECT-TYPE    
  Integer32  

csOrionVPNVRouterIpRouteMetric3 1.3.6.1.4.1.3085.3.1.4.2.3.3.1.13
An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's csOrionVPNVRouterIpRouteProto value. If this metric is not used, its value should be set to -1.
OBJECT-TYPE    
  Integer32  

csOrionVPNVRouterIpRouteMetric4 1.3.6.1.4.1.3085.3.1.4.2.3.3.1.14
An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's csOrionVPNVRouterIpRouteProto value. If this metric is not used, its value should be set to -1.
OBJECT-TYPE    
  Integer32  

csOrionVPNVRouterIpRouteMetric5 1.3.6.1.4.1.3085.3.1.4.2.3.3.1.15
An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's csOrionVPNVRouterIpRouteProto value. If this metric is not used, its value should be set to -1.
OBJECT-TYPE    
  Integer32  

csOrionVPNVRouterIpRouteRowStatus 1.3.6.1.4.1.3085.3.1.4.2.3.3.1.16
A row status type for the VPN Virtual Router.
OBJECT-TYPE    
  RowStatus  

csOrionVPNVRouterIpRouteOperStatus 1.3.6.1.4.1.3085.3.1.4.2.3.3.1.17
A operational status for the Virtual Router of the VPN.
OBJECT-TYPE    
  OperStatus  

csOrionVPNVRouterIpNetToMediaTable 1.3.6.1.4.1.3085.3.1.4.2.3.4
The table of addressing information relevant to Orion's IP addresses.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionVPNVRouterIpNetToMediaEntry

csOrionVPNVRouterIpNetToMediaEntry 1.3.6.1.4.1.3085.3.1.4.2.3.4.1
The addressing information for one of this Orion's IP addresses.
OBJECT-TYPE    
  CsOrionVPNVRouterIpNetToMediaEntry  

csOrionVPNVRouterIpNetToMediaIfIndex 1.3.6.1.4.1.3085.3.1.4.2.3.4.1.1
The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
OBJECT-TYPE    
  Integer32  

csOrionVPNVRouterIpNetToMediaPhysAddress 1.3.6.1.4.1.3085.3.1.4.2.3.4.1.2
The media-dependent `physical' address.
OBJECT-TYPE    
  PhysAddress  

csOrionVPNVRouterIpNetToMediaNetAddress 1.3.6.1.4.1.3085.3.1.4.2.3.4.1.3
The IpAddress corresponding to the media- dependent `physical' address.
OBJECT-TYPE    
  IpAddress  

csOrionVPNVRouterIpNetToMediaType 1.3.6.1.4.1.3085.3.1.4.2.3.4.1.4
The type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the csOrionVPNVRouterIpNetToMediaTable. That is, it effectively dissasociates the interface identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant csOrionVPNVRouterIpNetToMediaType object.
OBJECT-TYPE    
  INTEGER other(1), invalid(2), dynamic(3), static(4)  

csOrionIpLocalAddrPoolTable 1.3.6.1.4.1.3085.3.1.4.2.3.5
This table contains pools of IP addresses. Clients can dynamically take addresses from a pool as they need them (and return them when finished).
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionIpLocalAddrPoolEntry

csOrionIpLocalAddrPoolEntry 1.3.6.1.4.1.3085.3.1.4.2.3.5.1
Each entry represents a single pool of IP addresses.
OBJECT-TYPE    
  CsOrionIpLocalAddrPoolEntry  

csOrionIpLocalAddrPoolName 1.3.6.1.4.1.3085.3.1.4.2.3.5.1.1
The name of this address pool. This is used to identify a specific address pool.
OBJECT-TYPE    
  DisplayString SIZE(1..80)  

csOrionIpLocalAddrPoolStartRange 1.3.6.1.4.1.3085.3.1.4.2.3.5.1.2
The start of the range of IP addresses in this pool.
OBJECT-TYPE    
  IpAddress  

csOrionIpLocalAddrPoolEndRange 1.3.6.1.4.1.3085.3.1.4.2.3.5.1.3
The end of the range of IP addresses in this pool.
OBJECT-TYPE    
  IpAddress  

csOrionIpLocalAddrPoolRowStatus 1.3.6.1.4.1.3085.3.1.4.2.3.5.1.4
The RowStatus object for this table.
OBJECT-TYPE    
  RowStatus  

csOrionVPNVRouterManagedIpRouteTable 1.3.6.1.4.1.3085.3.1.4.2.3.6
The table of addressing information relevant to Orion's managed IP addresses.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionVPNVRouterManagedIpRouteEntry

csOrionVPNVRouterManagedIpRouteEntry 1.3.6.1.4.1.3085.3.1.4.2.3.6.1
The addressing information for one of this Orion's managed IP addresses.
OBJECT-TYPE    
  CsOrionVPNVRouterManagedIpRouteEntry  

csOrionVPNVRouterManagedIpRouteOwner 1.3.6.1.4.1.3085.3.1.4.2.3.6.1.1
The owner/manager of this route. The well known route examples for managed routes are static and generated route managers which manage the routes of the respective types.
OBJECT-TYPE    
  INTEGER other(1), static(2), aggregate(3), generated(4), rib(5), fib(6), dial-ppp(7), dial-ipsec(8)  

csOrionVPNVRouterManagedIpRouteDest 1.3.6.1.4.1.3085.3.1.4.2.3.6.1.2
The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table- access mechanisms defined by the network management protocol in use.
OBJECT-TYPE    
  IpAddress  

csOrionVPNVRouterManagedIpRouteMask 1.3.6.1.4.1.3085.3.1.4.2.3.6.1.3
Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the csOrionVPNVRouterManagedIpRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the csOrionVPNVRouterManagedIpRouteMask by determining whether the value of the correspondent csOrionVPNVRouterManagedIpRouteDest field belong to a class-A, B, or C network, and then using one of: mask network 255.0.0.0 class-A 255.255.0.0 class-B 255.255.255.0 class-C If the value of the csOrionVPNVRouterManagedIpRouteDest is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism.
OBJECT-TYPE    
  IpAddress  

csOrionVPNVRouterManagedIpRouteTos 1.3.6.1.4.1.3085.3.1.4.2.3.6.1.4
The policy specifier is the IP TOS Field. The encoding of IP TOS is as specified by the following convention. Zero indicates the default path if no more specific policy applies. +-----+-----+-----+-----+-----+-----+-----+-----+ | | | | | PRECEDENCE | TYPE OF SERVICE | 0 | | | | | +-----+-----+-----+-----+-----+-----+-----+-----+ IP TOS IP TOS Field Policy Field Policy Contents Code Contents Code 0 0 0 0 ==> 0 0 0 0 1 ==> 2 0 0 1 0 ==> 4 0 0 1 1 ==> 6 0 1 0 0 ==> 8 0 1 0 1 ==> 10 0 1 1 0 ==> 12 0 1 1 1 ==> 14 1 0 0 0 ==> 16 1 0 0 1 ==> 18 1 0 1 0 ==> 20 1 0 1 1 ==> 22 1 1 0 0 ==> 24 1 1 0 1 ==> 26 1 1 1 0 ==> 28 1 1 1 1 ==> 30
OBJECT-TYPE    
  Integer32  

csOrionVPNVRouterManagedIpRouteNextHop 1.3.6.1.4.1.3085.3.1.4.2.3.6.1.5
The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface.)
OBJECT-TYPE    
  IpAddress  

csOrionVPNVRouterManagedIpRouteIfIndex 1.3.6.1.4.1.3085.3.1.4.2.3.6.1.6
The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
OBJECT-TYPE    
  Integer32  

csOrionVPNVRouterManagedIpRouteType 1.3.6.1.4.1.3085.3.1.4.2.3.6.1.7
The type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for which the next hop is not the final destina- tion. reject (2) refers to a route which, if matched, discards the message as unreachable. An ICMP unreachable message is sent to the originator of the packet. discard (1001) refers to the case where an ICMP message is not sent to the originator. These route types are used by protocols as a means of correctly aggregating routes.
OBJECT-TYPE    
  INTEGER other(1), reject(2), local(3), remote(4), discard(1001), receive(1002)  

csOrionVPNVRouterManagedIpRouteProto 1.3.6.1.4.1.3085.3.1.4.2.3.6.1.8
The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.
OBJECT-TYPE    
  INTEGER other(1), netmgmt(3), local(2), icmp(4), egp(5), ggp(6), hello(7), rip(8), isIs(9), esIs(10), ciscoIgrp(11), bbnSpfIgp(12), ospf(13), bgp(14), idpr(15), ciscoEigrp(16), dial-ppp(17), dial-ipsec(18)  

csOrionVPNVRouterManagedIpRouteAge 1.3.6.1.4.1.3085.3.1.4.2.3.6.1.9
If the route is added to the routing table, this field indicates the number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned.
OBJECT-TYPE    
  Integer32  

csOrionVPNVRouterManagedIpRouteInfo 1.3.6.1.4.1.3085.3.1.4.2.3.6.1.10
A reference to MIB definitions specific to the particular routing protocol/owner which is responsi- ble for this route, as determined by the value specified in the route's ipCidrRouteProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntactically valid object identif- ier, and any implementation conforming to ASN.1 and the Basic Encoding Rules must be able to generate and recognize this value.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

csOrionVPNVRouterManagedIpRouteNextHopAS 1.3.6.1.4.1.3085.3.1.4.2.3.6.1.11
The Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing-protocol specified in the route's csOrionVPNVRouterManagedIpRouteProto value. When this object is unknown or not relevant its value should be set to zero.
OBJECT-TYPE    
  Integer32  

csOrionVPNVRouterManagedIpRouteMetric1 1.3.6.1.4.1.3085.3.1.4.2.3.6.1.12
The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol/owner specified in the route's csOrionVPNVRouterManagedIpRouteProto value. If this metric is not used, its value should be set to -1.
OBJECT-TYPE    
  Integer32  

csOrionVPNVRouterManagedIpRouteMetric2 1.3.6.1.4.1.3085.3.1.4.2.3.6.1.13
An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's csOrionVPNVRouterManagedIpRouteProto value. If this metric is not used, its value should be set to -1.
OBJECT-TYPE    
  Integer32  

csOrionVPNVRouterManagedIpRouteMetric3 1.3.6.1.4.1.3085.3.1.4.2.3.6.1.14
An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's csOrionVPNVRouterManagedIpRouteProto value. If this metric is not used, its value should be set to -1.
OBJECT-TYPE    
  Integer32  

csOrionVPNVRouterManagedIpRouteMetric4 1.3.6.1.4.1.3085.3.1.4.2.3.6.1.15
An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's csOrionVPNVRouterManagedIpRouteProto value. If this metric is not used, its value should be set to -1.
OBJECT-TYPE    
  Integer32  

csOrionVPNVRouterManagedIpRouteMetric5 1.3.6.1.4.1.3085.3.1.4.2.3.6.1.16
An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's csOrionVPNVRouterManagedIpRouteProto value. If this metric is not used, its value should be set to -1.
OBJECT-TYPE    
  Integer32  

csOrionVPNVRouterManagedIpRoutePreference1 1.3.6.1.4.1.3085.3.1.4.2.3.6.1.17
The primary preference value for this route. The route preference value which is also referred to as the Adminstrative Distance is used for selecting a route when multiple routes from different routing protocols exist. The route with a lower preference value is preferred. Valid range is 1 through 255.
OBJECT-TYPE    
  Integer32  

csOrionVPNVRouterManagedIpRoutePreference2 1.3.6.1.4.1.3085.3.1.4.2.3.6.1.18
The secondary preference value for this route. The route preference value which is also referred to as the Adminstrative Distance is used for selecting a route when multiple routes from different routing protocols exist. The route with a lower preference value is preferred. Valid range is 1 through 255.
OBJECT-TYPE    
  Integer32  

csOrionVPNVRouterManagedIpRouteColor1 1.3.6.1.4.1.3085.3.1.4.2.3.6.1.19
The primary color value for this route. The color is used a finer grain preference value. It should be applied for route select if preference1 and preference2 values match.
OBJECT-TYPE    
  Integer32  

csOrionVPNVRouterManagedIpRouteColor2 1.3.6.1.4.1.3085.3.1.4.2.3.6.1.20
The secondary color value for this route. The color is used a finer grain preference value. It should be applied for route select if preference1 and preference2 values match.
OBJECT-TYPE    
  Integer32  

csOrionVPNVRouterManagedIpRouteActiveOption 1.3.6.1.4.1.3085.3.1.4.2.3.6.1.21
Additional information for managed routes which is included with the route when it is installed in the routing table. unspecified (1) implies the default option for the route protocol should be used. active (2) routes are removed from the routing and forwarding table if they become inactive. passive (3) routes remain installed in the routing and forwarding tables it the route becomes inactive. They are marked with reject next-hops when they are inactive.
OBJECT-TYPE    
  INTEGER unspecified(1), active(2), passive(3)  

csOrionVPNVRouterManagedIpRouteInstallOption 1.3.6.1.4.1.3085.3.1.4.2.3.6.1.22
Additional information for managed routes which is included with the route when it is installed in the routing table. unspecified (1) implies the default option for the route protocol should be used. install (2) routes are eligibled to be installed into the roting and forwarding tables if selected. no-install (3) routes are not considered for selection of active routes and hence not installed in the forwarding table.
OBJECT-TYPE    
  INTEGER unspecified(1), install(2), no-install(3)  

csOrionVPNVRouterManagedIpRouteAdvertiseOption 1.3.6.1.4.1.3085.3.1.4.2.3.6.1.23
Additional information for managed routes which is included with the route when it is installed in the routing table. unspecified (1) implies the default option for the route protocol should be used. readvertise (2) routes are eligibled to be readvertised by by other routing protocols if the route is active. no-readvertise (3) routes are not considered for readverisement by other protocols.
OBJECT-TYPE    
  INTEGER unspecified(1), readvertise(2), no-readvertise(3)  

csOrionVPNVRouterManagedIpRouteRetainOption 1.3.6.1.4.1.3085.3.1.4.2.3.6.1.24
Additional information for managed routes which is included with the route when it is installed in the routing table. unspecified (1) implies the default option for the route protocol should be used. retain (2) routes are retained in the forwarding table if the route manager shuts down. no-retain (3) routes are removed from the routing table if the route manager shuts down.
OBJECT-TYPE    
  INTEGER unspecified(1), retain(2), no-retain(3)  

csOrionVPNVRouterManagedIpRouteRowStatus 1.3.6.1.4.1.3085.3.1.4.2.3.6.1.25
A row status type for the VPN Virtual Router.
OBJECT-TYPE    
  RowStatus  

csOrionVPNVRouterManagedIpRouteOperState 1.3.6.1.4.1.3085.3.1.4.2.3.6.1.26
The operational state of this route. The state is ON if the route is selecetd to the IP forwarding table. Otherwise, the operational state is OFF.
OBJECT-TYPE    
  OperState  

csOrionIpEnd 1.3.6.1.4.1.3085.3.1.4.2.3.7
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionOspf 1.3.6.1.4.1.3085.3.1.4.2.4
OBJECT IDENTIFIER    

csOspfConf 1.3.6.1.4.1.3085.3.1.4.2.4.1
OBJECT IDENTIFIER    

csOspfGeneralTable 1.3.6.1.4.1.3085.3.1.4.2.4.1.1
Information describing the configured parame- ters and cumulative statistics of the router's attached areas.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOspfGeneralEntry

csOspfGeneralEntry 1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1
Information describing the configured parame- ters and cumulative statistics of one of the router's attached areas.
OBJECT-TYPE    
  CsOspfGeneralEntry  

csOspfRouterId 1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.1
A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the router's IP interface addresses.
OBJECT-TYPE    
  RouterID  

csOspfAdminStat 1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.2
The administrative status of OSPF in the router. The value 'enabled' denotes that the OSPF process is active on the Virtual Router. 'disabled' disables it on all interfaces on the Virtual Router.
OBJECT-TYPE    
  Status  

csOspfVersionNumber 1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.3
The current version number of the OSPF protocol is 2.
OBJECT-TYPE    
  INTEGER version2(2)  

csOspfAreaBdrRtrStatus 1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.4
A flag to note whether this router is an area border router.
OBJECT-TYPE    
  TruthValue  

csOspfASBdrRtrStatus 1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.5
A flag to note whether this router is config- ured as an Autonomous System border router.
OBJECT-TYPE    
  TruthValue  

csOspfExternLsaCount 1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.6
The number of external (LS type 5) link-state advertisements in the link-state database.
OBJECT-TYPE    
  Gauge32  

csOspfExternLsaCksumSum 1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.7
The 32-bit unsigned sum of the LS checksums of the external link-state advertisements con- tained in the link-state database. This sum can be used to determine if there has been a change in a router's link state database, and to compare the link-state database of two routers.
OBJECT-TYPE    
  Integer32  

csOspfTOSSupport 1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.8
The router's support for type-of-service rout- ing.
OBJECT-TYPE    
  TruthValue  

csOspfOriginateNewLsas 1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.9
The number of new link-state advertisements that have been originated. This number is in- cremented each time the router originates a new LSA.
OBJECT-TYPE    
  Counter32  

csOspfRxNewLsas 1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.10
The number of link-state advertisements re- ceived determined to be new instantiations. This number does not include newer instantia- tions of self-originated link-state advertise- ments.
OBJECT-TYPE    
  Counter32  

csOspfExtLsdbLimit 1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.11
The maximum number of non-default AS- external-LSAs entries that can be stored in the link-state database. If the value is -1, then there is no limit. When the number of non-default AS-external-LSAs in a router's link-state database reaches csOspfExtLsdbLimit, the router enters Overflow- State. The router never holds more than csOspfExtLsdbLimit non-default AS-external-LSAs in its database. csOspfExtLsdbLimit MUST be set identically in all routers attached to the OSPF backbone and/or any regular OSPF area. (i.e., OSPF stub areas and NSSAs are excluded).
OBJECT-TYPE    
  Integer32 -1..'7FFFFFFF'h  

csOspfMulticastExtensions 1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.12
A Bit Mask indicating whether the router is forwarding IP multicast (Class D) datagrams based on the algorithms defined in the Multi- cast Extensions to OSPF. Bit 0, if set, indicates that the router can forward IP multicast datagrams in the router's directly attached areas (called intra-area mul- ticast routing). Bit 1, if set, indicates that the router can forward IP multicast datagrams between OSPF areas (called inter-area multicast routing). Bit 2, if set, indicates that the router can forward IP multicast datagrams between Auto- nomous Systems (called inter-AS multicast rout- ing). Only certain combinations of bit settings are allowed, namely: 0 (no multicast forwarding is enabled), 1 (intra-area multicasting only), 3 (intra-area and inter-area multicasting), 5 (intra-area and inter-AS multicasting) and 7 (multicasting everywhere). By default, no mul- ticast forwarding is enabled.
OBJECT-TYPE    
  Integer32  

csOspfExitOverflowInterval 1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.13
The number of seconds that, after entering OverflowState, a router will attempt to leave OverflowState. This allows the router to again originate non-default AS-external-LSAs. When set to 0, the router will not leave Overflow- State until restarted.
OBJECT-TYPE    
  PositiveInteger  

csOspfDemandExtensions 1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.14
The router's support for demand routing.
OBJECT-TYPE    
  TruthValue  

csOspfGeneralEntryRowStatus 1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.15
A row status type for the OSPF General Table.
OBJECT-TYPE    
  RowStatus  

csOspfSpfDelay 1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.16
The time delay between an OSPF topology change and an SPF calculation.
OBJECT-TYPE    
  INTEGER 0..65535  

csOspfSpfHold 1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.17
The time between two consecutive SPF calculations.
OBJECT-TYPE    
  INTEGER 0..65535  

csOspfRefBw 1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.18
The reference bandwidth used to calculate the default interface metric.
OBJECT-TYPE    
  INTEGER 1..4294967  

csOspfPrefInt 1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.19
The route preference given to a route internal to an Autonomous System.
OBJECT-TYPE    
  INTEGER 0..255  

csOspfPrefExt 1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.20
The route preference given to a route external to an Autonomous System.
OBJECT-TYPE    
  INTEGER 0..255  

csOspfAreaTable 1.3.6.1.4.1.3085.3.1.4.2.4.1.2
Information describing the configured parame- ters of the router's attached areas.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOspfAreaEntry

csOspfAreaEntry 1.3.6.1.4.1.3085.3.1.4.2.4.1.2.1
Information describing the configured parame- ters and cumulative statistics of one of the router's attached areas.
OBJECT-TYPE    
  CsOspfAreaEntry  

csOspfAreaId 1.3.6.1.4.1.3085.3.1.4.2.4.1.2.1.1
A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone.
OBJECT-TYPE    
  AreaID  

csOspfAreaName 1.3.6.1.4.1.3085.3.1.4.2.4.1.2.1.2
A descriptive name for this area.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOspfImportAsExtern 1.3.6.1.4.1.3085.3.1.4.2.4.1.2.1.3
The area's support for importing AS external link- state advertisements.
OBJECT-TYPE    
  INTEGER importExternal(1), importNoExternal(2), importNssa(3)  

csOspfSpfRuns 1.3.6.1.4.1.3085.3.1.4.2.4.1.2.1.4
The number of times that the intra-area route table has been calculated using this area's link-state database. This is typically done using Dijkstra's algorithm.
OBJECT-TYPE    
  Counter32  

csOspfAreaBdrRtrCount 1.3.6.1.4.1.3085.3.1.4.2.4.1.2.1.5
The total number of area border routers reach- able within this area. This is initially zero, and is calculated in each SPF Pass.
OBJECT-TYPE    
  Gauge32  

csOspfAsBdrRtrCount 1.3.6.1.4.1.3085.3.1.4.2.4.1.2.1.6
The total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass.
OBJECT-TYPE    
  Gauge32  

csOspfAreaLsaCount 1.3.6.1.4.1.3085.3.1.4.2.4.1.2.1.7
The total number of link-state advertisements in this area's link-state database, excluding AS External LSA's.
OBJECT-TYPE    
  Gauge32  

csOspfAreaLsaCksumSum 1.3.6.1.4.1.3085.3.1.4.2.4.1.2.1.8
The 32-bit unsigned sum of the link-state ad- vertisements' LS checksums contained in this area's link-state database. This sum excludes external (LS type 5) link-state advertisements. The sum can be used to determine if there has been a change in a router's link state data- base, and to compare the link-state database of two routers.
OBJECT-TYPE    
  Integer32  

csOspfAreaSummary 1.3.6.1.4.1.3085.3.1.4.2.4.1.2.1.9
The variable csOspfAreaSummary controls the im- port of summary LSAs into stub areas. It has no effect on other areas. If it is noAreaSummary, the router will neither originate nor propagate summary LSAs into the stub area. It will rely entirely on its de- fault route. If it is sendAreaSummary, the router will both summarize and propagate summary LSAs.
OBJECT-TYPE    
  INTEGER noAreaSummary(1), sendAreaSummary(2)  

csOspfAreaAuthType 1.3.6.1.4.1.3085.3.1.4.2.4.1.2.1.10
The authentication type specified for this area.
OBJECT-TYPE    
  INTEGER none(0), simplePassword(1), md5(2)  

csOspfAreaRowStatus 1.3.6.1.4.1.3085.3.1.4.2.4.1.2.1.11
A row status type for the OSPF Area Table.
OBJECT-TYPE    
  RowStatus  

csOspfAreaOperStatus 1.3.6.1.4.1.3085.3.1.4.2.4.1.2.1.12
A operational status for the OSPF Area Table.
OBJECT-TYPE    
  OperStatus  

csOspfStubAreaTable 1.3.6.1.4.1.3085.3.1.4.2.4.1.3
The set of metrics that will be advertised by a default Area Border Router into a stub area.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOspfStubAreaEntry

csOspfStubAreaEntry 1.3.6.1.4.1.3085.3.1.4.2.4.1.3.1
The metric for a given Type of Service that will be advertised by a default Area Border Router into a stub area.
OBJECT-TYPE    
  CsOspfStubAreaEntry  

csOspfStubAreaId 1.3.6.1.4.1.3085.3.1.4.2.4.1.3.1.1
The 32 bit identifier for the Stub Area. On creation, this can be derived from the in- stance.
OBJECT-TYPE    
  AreaID  

csOspfStubTOS 1.3.6.1.4.1.3085.3.1.4.2.4.1.3.1.2
The Type of Service associated with the metric. On creation, this can be derived from the instance.
OBJECT-TYPE    
  TOSType  

csOspfStubMetric 1.3.6.1.4.1.3085.3.1.4.2.4.1.3.1.3
The metric value applied at the indicated type of service. By default, this equals the least metric at the type of service among the inter- faces to other areas.
OBJECT-TYPE    
  BigMetric  

csOspfStubStatus 1.3.6.1.4.1.3085.3.1.4.2.4.1.3.1.4
This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
OBJECT-TYPE    
  RowStatus  

csOspfStubMetricType 1.3.6.1.4.1.3085.3.1.4.2.4.1.3.1.5
This variable displays the type of metric ad- vertised as a default route.
OBJECT-TYPE    
  INTEGER ospfMetric(1), comparableCost(2), nonComparable(3)  

csOspfLsdbTable 1.3.6.1.4.1.3085.3.1.4.2.4.1.4
The OSPF Process's Link State Database.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOspfLsdbEntry

csOspfLsdbEntry 1.3.6.1.4.1.3085.3.1.4.2.4.1.4.1
A single Link State Advertisement.
OBJECT-TYPE    
  CsOspfLsdbEntry  

csOspfLsdbAreaId 1.3.6.1.4.1.3085.3.1.4.2.4.1.4.1.1
The 32 bit identifier of the Area from which the LSA was received.
OBJECT-TYPE    
  AreaID  

csOspfLsdbType 1.3.6.1.4.1.3085.3.1.4.2.4.1.4.1.2
The type of the link state advertisement. Each link state type has a separate advertise- ment format.
OBJECT-TYPE    
  INTEGER routerLink(1), networkLink(2), summaryLink(3), asSummaryLink(4), asExternalLink(5), multicastLink(6), nssaExternalLink(7)  

csOspfLsdbLsid 1.3.6.1.4.1.3085.3.1.4.2.4.1.4.1.3
The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
OBJECT-TYPE    
  IpAddress  

csOspfLsdbRouterId 1.3.6.1.4.1.3085.3.1.4.2.4.1.4.1.4
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
OBJECT-TYPE    
  RouterID  

csOspfLsdbSequence 1.3.6.1.4.1.3085.3.1.4.2.4.1.4.1.5
The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
OBJECT-TYPE    
  Integer32  

csOspfLsdbAge 1.3.6.1.4.1.3085.3.1.4.2.4.1.4.1.6
This field is the age of the link state adver- tisement in seconds.
OBJECT-TYPE    
  Integer32  

csOspfLsdbChecksum 1.3.6.1.4.1.3085.3.1.4.2.4.1.4.1.7
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum.
OBJECT-TYPE    
  Integer32  

csOspfLsdbAdvertisement 1.3.6.1.4.1.3085.3.1.4.2.4.1.4.1.8
The entire Link State Advertisement, including its header.
OBJECT-TYPE    
  OCTET STRING SIZE(1..65535)  

csOspfHostTable 1.3.6.1.4.1.3085.3.1.4.2.4.1.5
The list of Hosts, and their metrics, that the router will advertise as host routes.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOspfHostEntry

csOspfHostEntry 1.3.6.1.4.1.3085.3.1.4.2.4.1.5.1
A metric to be advertised, for a given type of service, when a given host is reachable.
OBJECT-TYPE    
  CsOspfHostEntry  

csOspfHostIpAddress 1.3.6.1.4.1.3085.3.1.4.2.4.1.5.1.1
The IP Address of the Host.
OBJECT-TYPE    
  IpAddress  

csOspfHostTOS 1.3.6.1.4.1.3085.3.1.4.2.4.1.5.1.2
The Type of Service of the route being config- ured.
OBJECT-TYPE    
  TOSType  

csOspfHostMetric 1.3.6.1.4.1.3085.3.1.4.2.4.1.5.1.3
The Metric to be advertised.
OBJECT-TYPE    
  Metric  

csOspfHostStatus 1.3.6.1.4.1.3085.3.1.4.2.4.1.5.1.4
This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
OBJECT-TYPE    
  RowStatus  

csOspfHostAreaID 1.3.6.1.4.1.3085.3.1.4.2.4.1.5.1.5
The Area the Host Entry is to be found within. By default, the area that a subsuming OSPF in- terface is in, or 0.0.0.0
OBJECT-TYPE    
  AreaID  

csOspfIfTable 1.3.6.1.4.1.3085.3.1.4.2.4.1.6
The OSPF Interface Table describes the inter- faces from the viewpoint of OSPF.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOspfIfEntry

csOspfIfEntry 1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1
The OSPF Interface Entry describes one inter- face from the viewpoint of OSPF.
OBJECT-TYPE    
  CsOspfIfEntry  

csOspfIfIpAddress 1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.1
The IP address of this OSPF interface.
OBJECT-TYPE    
  IpAddress  

csOspfAddressLessIf 1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.2
For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corresponding value of ifIndex for interfaces having no IP Address.
OBJECT-TYPE    
  Integer32  

csOspfIfAreaId 1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.3
A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.
OBJECT-TYPE    
  AreaID  

csOspfIfType 1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.4
The OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broad- cast LANs, such as Ethernet and IEEE 802.5, take the value 'broadcast', X.25 and similar technologies take the value 'nbma', and links that are definitively point to point take the value 'pointToPoint'.
OBJECT-TYPE    
  INTEGER broadcast(1), nbma(2), pointToPoint(3), pointToMultipoint(5), loopback(6)  

csOspfIfAdminStatus 1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.5
The OSPF interface's administrative status. The value formed on the interface, and the in- terface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to OSPF.
OBJECT-TYPE    
  Status  

csOspfIfRtrPriority 1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.6
The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligi- ble to become the designated router on this particular network. In the event of a tie in this value, routers will use their Router ID as a tie breaker.
OBJECT-TYPE    
  DesignatedRouterPriority  

csOspfIfTransitDelay 1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.7
The estimated number of seconds it takes to transmit a link state update packet over this interface.
OBJECT-TYPE    
  UpToMaxAge  

csOspfIfRetransInterval 1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.8
The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database descrip- tion and link-state request packets.
OBJECT-TYPE    
  UpToMaxAge  

csOspfIfHelloInterval 1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.9
The length of time, in seconds, between the Hello packets that the routers within this area send on the interface. This value must be the same for all routers attached to a common network.
OBJECT-TYPE    
  HelloRange  

csOspfIfRtrDeadInterval 1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.10
The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network.
OBJECT-TYPE    
  PositiveInteger  

csOspfIfPollInterval 1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.11
The larger time interval, in seconds, between the Hello packets sent to an inactive non- broadcast multi- access neighbor.
OBJECT-TYPE    
  PositiveInteger  

csOspfIfState 1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.12
The OSPF Interface State.
OBJECT-TYPE    
  INTEGER down(1), loopback(2), waiting(3), pointToPoint(4), designatedRouter(5), backupDesignatedRouter(6), otherDesignatedRouter(7)  

csOspfIfDesignatedRouter 1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.13
The IP Address of the Designated Router.
OBJECT-TYPE    
  IpAddress  

csOspfIfBackupDesignatedRouter 1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.14
The IP Address of the Backup Designated Router.
OBJECT-TYPE    
  IpAddress  

csOspfIfEvents 1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.15
The number of times this OSPF interface has changed its state, or an error has occurred.
OBJECT-TYPE    
  Counter32  

csOspfIfAuthType 1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.16
The authentication type specified for this area.
OBJECT-TYPE    
  INTEGER none(0), simplePassword(1), md5(2)  

csOspfIfAuthKey 1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.17
The Authentication Key. If the Area's Author- ization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. Note that unauthenticated interfaces need no authentication key, and simple password authen- tication cannot use a key of more than 8 oc- tets. Larger keys are useful only with authen- tication mechanisms not specified in this docu- ment. When read, csOspfIfAuthKey always returns an Oc- tet String of length zero.
OBJECT-TYPE    
  OCTET STRING SIZE(0..256)  

csOspfIfMulticastForwarding 1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.18
The way multicasts should forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as data link uni- casts. Data link multicasting is not meaning- ful on point to point and NBMA interfaces, and setting csOspfMulticastForwarding to 0 effective- ly disables all multicast forwarding.
OBJECT-TYPE    
  INTEGER blocked(1), multicast(2), unicast(3)  

csOspfIfDemand 1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.19
Indicates whether Demand OSPF procedures (hel- lo supression to FULL neighbors and setting the DoNotAge flag on proogated LSAs) should be per- formed on this interface.
OBJECT-TYPE    
  TruthValue  

csOspfIfMetric 1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.20
The metric of using this type of service on this interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed. Note: this is added for the support of TOS 0 Metric value, It will be deprecated later when TOS is supported and the csOspfIfMetricTable is being used.
OBJECT-TYPE    
  Metric  

csOspfIfAdvertiseSubnet 1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.21
Enable/Disable advertise-subnet capability.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

csOspfIfStatus 1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.22
A row status type for the OSPF Interface Table.
OBJECT-TYPE    
  RowStatus  

csOspfIfPassive 1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.23
Indicates whether OSPF interface is passive. OSPF Hello packets not sent on this interface.
OBJECT-TYPE    
  TruthValue  

csOspfIfMetricTable 1.3.6.1.4.1.3085.3.1.4.2.4.1.7
The TOS metrics for a non-virtual interface identified by the interface index.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOspfIfMetricEntry

csOspfIfMetricEntry 1.3.6.1.4.1.3085.3.1.4.2.4.1.7.1
A particular TOS metric for a non-virtual in- terface identified by the interface index.
OBJECT-TYPE    
  CsOspfIfMetricEntry  

csOspfIfMetricIpAddress 1.3.6.1.4.1.3085.3.1.4.2.4.1.7.1.1
The IP address of this OSPF interface. On row creation, this can be derived from the in- stance.
OBJECT-TYPE    
  IpAddress  

csOspfIfMetricAddressLessIf 1.3.6.1.4.1.3085.3.1.4.2.4.1.7.1.2
For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the value of ifIndex for in- terfaces having no IP Address. On row crea- tion, this can be derived from the instance.
OBJECT-TYPE    
  Integer32  

csOspfIfMetricTOS 1.3.6.1.4.1.3085.3.1.4.2.4.1.7.1.3
The type of service metric being referenced. On row creation, this can be derived from the instance.
OBJECT-TYPE    
  TOSType  

csOspfIfMetricValue 1.3.6.1.4.1.3085.3.1.4.2.4.1.7.1.4
The metric of using this type of service on this interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed.
OBJECT-TYPE    
  Metric  

csOspfIfMetricStatus 1.3.6.1.4.1.3085.3.1.4.2.4.1.7.1.5
This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
OBJECT-TYPE    
  RowStatus  

csOspfVirtIfTable 1.3.6.1.4.1.3085.3.1.4.2.4.1.8
Information about this router's virtual inter- faces.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOspfVirtIfEntry

csOspfVirtIfEntry 1.3.6.1.4.1.3085.3.1.4.2.4.1.8.1
Information about a single Virtual Interface.
OBJECT-TYPE    
  CsOspfVirtIfEntry  

csOspfVirtIfAreaId 1.3.6.1.4.1.3085.3.1.4.2.4.1.8.1.1
The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0
OBJECT-TYPE    
  AreaID  

csOspfVirtIfNeighbor 1.3.6.1.4.1.3085.3.1.4.2.4.1.8.1.2
The Router ID of the Virtual Neighbor.
OBJECT-TYPE    
  RouterID  

csOspfVirtIfTransitDelay 1.3.6.1.4.1.3085.3.1.4.2.4.1.8.1.3
The estimated number of seconds it takes to transmit a link- state update packet over this interface.
OBJECT-TYPE    
  UpToMaxAge  

csOspfVirtIfRetransInterval 1.3.6.1.4.1.3085.3.1.4.2.4.1.8.1.4
The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database descrip- tion and link-state request packets. This value should be well over the expected round- trip time.
OBJECT-TYPE    
  UpToMaxAge  

csOspfVirtIfHelloInterval 1.3.6.1.4.1.3085.3.1.4.2.4.1.8.1.5
The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for the virtual neighbor.
OBJECT-TYPE    
  HelloRange  

csOspfVirtIfRtrDeadInterval 1.3.6.1.4.1.3085.3.1.4.2.4.1.8.1.6
The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neigh- bor.
OBJECT-TYPE    
  PositiveInteger  

csOspfVirtIfState 1.3.6.1.4.1.3085.3.1.4.2.4.1.8.1.7
OSPF virtual interface states.
OBJECT-TYPE    
  INTEGER down(1), pointToPoint(4)  

csOspfVirtIfEvents 1.3.6.1.4.1.3085.3.1.4.2.4.1.8.1.8
The number of state changes or error events on this Virtual Link
OBJECT-TYPE    
  Counter32  

csOspfVirtIfAuthType 1.3.6.1.4.1.3085.3.1.4.2.4.1.8.1.9
The authentication type specified for a virtu- al interface. Additional authentication types may be assigned locally.
OBJECT-TYPE    
  INTEGER 0..255  

csOspfVirtIfAuthKey 1.3.6.1.4.1.3085.3.1.4.2.4.1.8.1.10
If Authentication Type is simplePassword, the device will left adjust and zero fill to 8 oc- tets. Note that unauthenticated interfaces need no authentication key, and simple password authen- tication cannot use a key of more than 8 oc- tets. Larger keys are useful only with authen- tication mechanisms not specified in this docu- ment. When read, csOspfVifAuthKey always returns a string of length zero.
OBJECT-TYPE    
  OCTET STRING SIZE(0..256)  

csOspfVirtIfStatus 1.3.6.1.4.1.3085.3.1.4.2.4.1.8.1.11
This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
OBJECT-TYPE    
  RowStatus  

csOspfNbrTable 1.3.6.1.4.1.3085.3.1.4.2.4.1.9
A table of non-virtual neighbor information.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOspfNbrEntry

csOspfNbrEntry 1.3.6.1.4.1.3085.3.1.4.2.4.1.9.1
The information regarding a single neighbor.
OBJECT-TYPE    
  CsOspfNbrEntry  

csOspfNbrIpAddr 1.3.6.1.4.1.3085.3.1.4.2.4.1.9.1.1
The IP address this neighbor is using in its IP Source Address. Note that, on addressless links, this will not be 0.0.0.0, but the ad- dress of another of the neighbor's interfaces.
OBJECT-TYPE    
  IpAddress  

csOspfNbrAddressLessIndex 1.3.6.1.4.1.3085.3.1.4.2.4.1.9.1.2
On an interface having an IP Address, zero. On addressless interfaces, the corresponding value of ifIndex in the Internet Standard MIB. On row creation, this can be derived from the instance.
OBJECT-TYPE    
  InterfaceIndex  

csOspfNbrRtrId 1.3.6.1.4.1.3085.3.1.4.2.4.1.9.1.3
A 32-bit integer (represented as a type IpAd- dress) uniquely identifying the neighboring router in the Autonomous System.
OBJECT-TYPE    
  RouterID  

csOspfNbrOptions 1.3.6.1.4.1.3085.3.1.4.2.4.1.9.1.4
A Bit Mask corresponding to the neighbor's op- tions field. Bit 0, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric. Bit 1, if set, indicates that the associated area accepts and operates on external informa- tion; if zero, it is a stub area. Bit 2, if set, indicates that the system is ca- pable of routing IP Multicast datagrams; i.e., that it implements the Multicast Extensions to OSPF. Bit 3, if set, indicates that the associated area is an NSSA. These areas are capable of carrying type 7 external advertisements, which are translated into type 5 external advertise- ments at NSSA borders.
OBJECT-TYPE    
  Integer32  

csOspfNbrPriority 1.3.6.1.4.1.3085.3.1.4.2.4.1.9.1.5
The priority of this neighbor in the designat- ed router election algorithm. The value 0 sig- nifies that the neighbor is not eligible to be- come the designated router on this particular network.
OBJECT-TYPE    
  DesignatedRouterPriority  

csOspfNbrState 1.3.6.1.4.1.3085.3.1.4.2.4.1.9.1.6
The State of the relationship with this Neigh- bor.
OBJECT-TYPE    
  INTEGER down(1), attempt(2), init(3), twoWay(4), exchangeStart(5), exchange(6), loading(7), full(8)  

csOspfNbrEvents 1.3.6.1.4.1.3085.3.1.4.2.4.1.9.1.7
The number of times this neighbor relationship has changed state, or an error has occurred.
OBJECT-TYPE    
  Counter32  

csOspfNbrLsRetransQLen 1.3.6.1.4.1.3085.3.1.4.2.4.1.9.1.8
The current length of the retransmission queue.
OBJECT-TYPE    
  Gauge32  

csOspfNbmaNbrStatus 1.3.6.1.4.1.3085.3.1.4.2.4.1.9.1.9
This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
OBJECT-TYPE    
  RowStatus  

csOspfNbmaNbrPermanence 1.3.6.1.4.1.3085.3.1.4.2.4.1.9.1.10
This variable displays the status of the en- try. 'dynamic' and 'permanent' refer to how the neighbor became known.
OBJECT-TYPE    
  INTEGER dynamic(1), permanent(2)  

csOspfNbrHelloSuppressed 1.3.6.1.4.1.3085.3.1.4.2.4.1.9.1.11
Indicates whether Hellos are being suppressed to the neighbor
OBJECT-TYPE    
  TruthValue  

csOspfVirtNbrTable 1.3.6.1.4.1.3085.3.1.4.2.4.1.10
A table of virtual neighbor information.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOspfVirtNbrEntry

csOspfVirtNbrEntry 1.3.6.1.4.1.3085.3.1.4.2.4.1.10.1
Virtual neighbor information.
OBJECT-TYPE    
  CsOspfVirtNbrEntry  

csOspfVirtNbrArea 1.3.6.1.4.1.3085.3.1.4.2.4.1.10.1.1
The Transit Area Identifier.
OBJECT-TYPE    
  AreaID  

csOspfVirtNbrRtrId 1.3.6.1.4.1.3085.3.1.4.2.4.1.10.1.2
A 32-bit integer uniquely identifying the neighboring router in the Autonomous System.
OBJECT-TYPE    
  RouterID  

csOspfVirtNbrIpAddr 1.3.6.1.4.1.3085.3.1.4.2.4.1.10.1.3
The IP address this Virtual Neighbor is us- ing.
OBJECT-TYPE    
  IpAddress  

csOspfVirtNbrOptions 1.3.6.1.4.1.3085.3.1.4.2.4.1.10.1.4
A Bit Mask corresponding to the neighbor's op- tions field. Bit 1, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric. Bit 2, if set, indicates that the system is Network Multicast capable; ie, that it imple- ments OSPF Multicast Routing.
OBJECT-TYPE    
  Integer32  

csOspfVirtNbrState 1.3.6.1.4.1.3085.3.1.4.2.4.1.10.1.5
The state of the Virtual Neighbor Relation- ship.
OBJECT-TYPE    
  INTEGER down(1), attempt(2), init(3), twoWay(4), exchangeStart(5), exchange(6), loading(7), full(8)  

csOspfVirtNbrEvents 1.3.6.1.4.1.3085.3.1.4.2.4.1.10.1.6
The number of times this virtual link has changed its state, or an error has occurred.
OBJECT-TYPE    
  Counter32  

csOspfVirtNbrLsRetransQLen 1.3.6.1.4.1.3085.3.1.4.2.4.1.10.1.7
The current length of the retransmission queue.
OBJECT-TYPE    
  Gauge32  

csOspfVirtNbrHelloSuppressed 1.3.6.1.4.1.3085.3.1.4.2.4.1.10.1.8
Indicates whether Hellos are being suppressed to the neighbor
OBJECT-TYPE    
  TruthValue  

csOspfExtLsdbTable 1.3.6.1.4.1.3085.3.1.4.2.4.1.11
The OSPF Process's Links State Database.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOspfExtLsdbEntry

csOspfExtLsdbEntry 1.3.6.1.4.1.3085.3.1.4.2.4.1.11.1
A single Link State Advertisement.
OBJECT-TYPE    
  CsOspfExtLsdbEntry  

csOspfExtLsdbType 1.3.6.1.4.1.3085.3.1.4.2.4.1.11.1.1
The type of the link state advertisement. Each link state type has a separate advertise- ment format.
OBJECT-TYPE    
  INTEGER asExternalLink(5)  

csOspfExtLsdbLsid 1.3.6.1.4.1.3085.3.1.4.2.4.1.11.1.2
The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
OBJECT-TYPE    
  IpAddress  

csOspfExtLsdbRouterId 1.3.6.1.4.1.3085.3.1.4.2.4.1.11.1.3
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
OBJECT-TYPE    
  RouterID  

csOspfExtLsdbSequence 1.3.6.1.4.1.3085.3.1.4.2.4.1.11.1.4
The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
OBJECT-TYPE    
  Integer32  

csOspfExtLsdbAge 1.3.6.1.4.1.3085.3.1.4.2.4.1.11.1.5
This field is the age of the link state adver- tisement in seconds.
OBJECT-TYPE    
  Integer32  

csOspfExtLsdbChecksum 1.3.6.1.4.1.3085.3.1.4.2.4.1.11.1.6
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum.
OBJECT-TYPE    
  Integer32  

csOspfExtLsdbAdvertisement 1.3.6.1.4.1.3085.3.1.4.2.4.1.11.1.7
The entire Link State Advertisement, including its header.
OBJECT-TYPE    
  OCTET STRING SIZE(36)  

csOspfAreaAggregateTable 1.3.6.1.4.1.3085.3.1.4.2.4.1.12
A range of IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 includes all IP addresses from X.X.0.0 to X.X.255.255. Note that if ranges are configured such that one range sub- sumes another range (e.g., 10.0.0.0 mask 255.0.0.0 and 10.1.0.0 mask 255.255.0.0), the most specific match is the preferred one.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOspfAreaAggregateEntry

csOspfAreaAggregateEntry 1.3.6.1.4.1.3085.3.1.4.2.4.1.12.1
A range of IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 includes all IP addresses from X.X.0.0 to X.X.255.255. Note that if ranges are range configured such that one range subsumes another range (e.g., 10.0.0.0 mask 255.0.0.0 and 10.1.0.0 mask 255.255.0.0), the most specific match is the preferred one.
OBJECT-TYPE    
  CsOspfAreaAggregateEntry  

csOspfAreaAggregateAreaID 1.3.6.1.4.1.3085.3.1.4.2.4.1.12.1.1
The Area the Address Aggregate is to be found within.
OBJECT-TYPE    
  AreaID  

csOspfAreaAggregateLsdbType 1.3.6.1.4.1.3085.3.1.4.2.4.1.12.1.2
The type of the Address Aggregate. This field specifies the Lsdb type that this Address Ag- gregate applies to.
OBJECT-TYPE    
  INTEGER summaryLink(3), nssaExternalLink(7)  

csOspfAreaAggregateNet 1.3.6.1.4.1.3085.3.1.4.2.4.1.12.1.3
The IP Address of the Net or Subnet indicated by the range.
OBJECT-TYPE    
  IpAddress  

csOspfAreaAggregateMask 1.3.6.1.4.1.3085.3.1.4.2.4.1.12.1.4
The Subnet Mask that pertains to the Net or Subnet.
OBJECT-TYPE    
  IpAddress  

csOspfAreaAggregateStatus 1.3.6.1.4.1.3085.3.1.4.2.4.1.12.1.5
This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
OBJECT-TYPE    
  RowStatus  

csOspfAreaAggregateEffect 1.3.6.1.4.1.3085.3.1.4.2.4.1.12.1.6
Subnets subsumed by ranges either trigger the advertisement of the indicated aggregate (ad- vertiseMatching), or result in the subnet's not being advertised at all outside the area.
OBJECT-TYPE    
  INTEGER advertiseMatching(1), doNotAdvertiseMatching(2)  

csOspfImpPolTable 1.3.6.1.4.1.3085.3.1.4.2.4.1.13
A set of Import Policies (see csImpPolTable) that are applied by ospf.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOspfImpPolEntry

csOspfImpPolEntry 1.3.6.1.4.1.3085.3.1.4.2.4.1.13.1
Each entry represents a single import policy applied by the ospf layer on a Virtual Router.
OBJECT-TYPE    
  CsOspfImpPolEntry  

csOspfImpPolId 1.3.6.1.4.1.3085.3.1.4.2.4.1.13.1.1
The Import Policy (see the corresponding entry in csImpPolTable) that is applied to this Virtual Router.
OBJECT-TYPE    
  Integer32  

csOspfImpPolStatus 1.3.6.1.4.1.3085.3.1.4.2.4.1.13.1.2
The RowStatus object for this table. This is used to add and delete entries from this table.
OBJECT-TYPE    
  RowStatus  

csOspfExpPolTable 1.3.6.1.4.1.3085.3.1.4.2.4.1.14
A set of Export Policies (see csExpPolTable) that are applied by ospf.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOspfExpPolEntry

csOspfExpPolEntry 1.3.6.1.4.1.3085.3.1.4.2.4.1.14.1
Each entry represents a single import policy applied by the ospf layer on a Virtual Router.
OBJECT-TYPE    
  CsOspfExpPolEntry  

csOspfExpPolId 1.3.6.1.4.1.3085.3.1.4.2.4.1.14.1.1
The Export Policy (see the corresponding entry in csExpPolTable) that is applied to this Virtual Router.
OBJECT-TYPE    
  Integer32  

csOspfExpPolStatus 1.3.6.1.4.1.3085.3.1.4.2.4.1.14.1.2
The RowStatus object for this table. This is used to add and delete entries from this table.
OBJECT-TYPE    
  RowStatus  

csOspfIfMd5Table 1.3.6.1.4.1.3085.3.1.4.2.4.1.15
The OSPF Interface MD5 table contains a list of MD5 authentication structures and the corresponding MD5 authentication IDs for the inter- faces from the viewpoint of OSPF.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOspfIfMd5Entry

csOspfIfMd5Entry 1.3.6.1.4.1.3085.3.1.4.2.4.1.15.1
The OSPF Interface Entry contains the MD5 authentication structure corresponding to one inter-face from the viewpoint of OSPF.
OBJECT-TYPE    
  CsOspfIfMd5Entry  

csOspfIfMd5MessageDigestKeyId 1.3.6.1.4.1.3085.3.1.4.2.4.1.15.1.1
Message-digest authentication key. A shared secret key that is configured on all routers to specify the decryption algorithm to be used.
OBJECT-TYPE    
  Integer32  

csOspfIfMd5Key 1.3.6.1.4.1.3085.3.1.4.2.4.1.15.1.2
Message-digest authentication string for this interface. The string is encrypted using an algorithm specified by a shared secret key.
OBJECT-TYPE    
  OCTET STRING SIZE(0..256)  

csOspfIfMd5RowStatus 1.3.6.1.4.1.3085.3.1.4.2.4.1.15.1.3
This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
OBJECT-TYPE    
  RowStatus  

csOspfTrap 1.3.6.1.4.1.3085.3.1.4.2.4.2
OBJECT IDENTIFIER    

csOspfTrapControl 1.3.6.1.4.1.3085.3.1.4.2.4.2.1
OBJECT IDENTIFIER    

csOspfSetTrap 1.3.6.1.4.1.3085.3.1.4.2.4.2.1.1
A four-octet string serving as a bit map for the trap events defined by the OSPF traps. This object is used to enable and disable specific OSPF traps where a 1 in the bit field represents enabled. The right-most bit (least significant) represents trap 0.
OBJECT-TYPE    
  OCTET STRING SIZE(4)  

csOspfConfigErrorType 1.3.6.1.4.1.3085.3.1.4.2.4.2.1.2
Potential types of configuration conflicts. Used by the csOspfConfigError and csOspfConfigVir- tError traps.
OBJECT-TYPE    
  INTEGER badVersion(1), areaMismatch(2), unknownNbmaNbr(3), unknownVirtualNbr(4), authTypeMismatch(5), authFailure(6), netMaskMismatch(7), helloIntervalMismatch(8), deadIntervalMismatch(9), optionMismatch(10)  

csOspfPacketType 1.3.6.1.4.1.3085.3.1.4.2.4.2.1.3
OSPF packet types.
OBJECT-TYPE    
  INTEGER hello(1), dbDescript(2), lsReq(3), lsUpdate(4), lsAck(5)  

csOspfPacketSrc 1.3.6.1.4.1.3085.3.1.4.2.4.2.1.4
The IP address of an inbound packet that can- not be identified by a neighbor instance.
OBJECT-TYPE    
  IpAddress  

csOrionOspfEnd 1.3.6.1.4.1.3085.3.1.4.2.4.3
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionRip 1.3.6.1.4.1.3085.3.1.4.2.5
OBJECT IDENTIFIER    

csRipStats 1.3.6.1.4.1.3085.3.1.4.2.5.1
OBJECT IDENTIFIER    

csRipGlobalStatTable 1.3.6.1.4.1.3085.3.1.4.2.5.1.1
This table contains per-VR level stats for RIP. These counters are intended to facilitate debugging quickly changing routes or failing neighbors.
OBJECT-TYPE    
  SEQUENCE OF  
    CsRipGlobalStatEntry

csRipGlobalStatEntry 1.3.6.1.4.1.3085.3.1.4.2.5.1.1.1
Each entry contains a set of statistics for a specific Virtual Router.
OBJECT-TYPE    
  CsRipGlobalStatEntry  

csRipGlobalRouteChanges 1.3.6.1.4.1.3085.3.1.4.2.5.1.1.1.1
The number of route changes made to the IP Route Database by RIP. This does not include the refresh of a route's age.
OBJECT-TYPE    
  Counter32  

csRipGlobalQueries 1.3.6.1.4.1.3085.3.1.4.2.5.1.1.1.2
The number of responses sent to RIP queries from other systems.
OBJECT-TYPE    
  Counter32  

csRipIfStatTable 1.3.6.1.4.1.3085.3.1.4.2.5.1.2
A list of subnets which require separate status monitoring in RIP.
OBJECT-TYPE    
  SEQUENCE OF  
    CsRipIfStatEntry

csRipIfStatEntry 1.3.6.1.4.1.3085.3.1.4.2.5.1.2.1
A Single Routing Domain in a single Subnet.
OBJECT-TYPE    
  CsRipIfStatEntry  

csRipIfStatRcvBadPackets 1.3.6.1.4.1.3085.3.1.4.2.5.1.2.1.1
The number of RIP response packets received by the RIP process which were subsequently discarded for any reason (e.g. a version 0 packet, or an unknown command type).
OBJECT-TYPE    
  Counter32  

csRipIfStatRcvBadRoutes 1.3.6.1.4.1.3085.3.1.4.2.5.1.2.1.2
The number of routes, in valid RIP packets, which were ignored for any reason (e.g. unknown address family, or invalid metric).
OBJECT-TYPE    
  Counter32  

csRipIfStatSentUpdates 1.3.6.1.4.1.3085.3.1.4.2.5.1.2.1.3
The number of triggered RIP updates actually sent on this interface. This explicitly does NOT include full updates sent containing new information.
OBJECT-TYPE    
  Counter32  

csRipIfStatTableEnd 1.3.6.1.4.1.3085.3.1.4.2.5.1.3
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csRipConf 1.3.6.1.4.1.3085.3.1.4.2.5.2
OBJECT IDENTIFIER    

csRipGlobalConfTable 1.3.6.1.4.1.3085.3.1.4.2.5.2.1
A table of virtual router-specific configuration parameters.
OBJECT-TYPE    
  SEQUENCE OF  
    CsRipGlobalConfEntry

csRipGlobalConfEntry 1.3.6.1.4.1.3085.3.1.4.2.5.2.1.1
Each entry contains a set of configuration specific to a single virtual router.
OBJECT-TYPE    
  CsRipGlobalConfEntry  

csRipGlobalConfStatus 1.3.6.1.4.1.3085.3.1.4.2.5.2.1.1.1
Enable/Disable the use of RIP on this Virtual Router.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csRipGlobalConfAgeTime 1.3.6.1.4.1.3085.3.1.4.2.5.2.1.1.2
OBJECT-TYPE    
  INTEGER 1..10000  

csRipGlobalConfPerUpdateInt 1.3.6.1.4.1.3085.3.1.4.2.5.2.1.1.3
OBJECT-TYPE    
  INTEGER 1..10000  

csRipGlobalConfJitterUpdateStatus 1.3.6.1.4.1.3085.3.1.4.2.5.2.1.1.4
Enable/Disable the use of the Jitter Update feature
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csRipGlobalConfRfc1058CalcStatus 1.3.6.1.4.1.3085.3.1.4.2.5.2.1.1.5
Enable/Disable the use of the route metric calculation defined in rfc1058.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csRipGlobalConfReqOnStartup 1.3.6.1.4.1.3085.3.1.4.2.5.2.1.1.6
Enable/Disable the use of the request on startup feature.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csRipGlobalConfRowStatus 1.3.6.1.4.1.3085.3.1.4.2.5.2.1.1.7
The RowStatus object for this object. This is used to add/delete rows from this table. Setting it to create and go creates RIP on this Virtual Router. Setting it to destroy removes RIP from this Virtual Router.
OBJECT-TYPE    
  RowStatus  

csRipGlobalConfLogAreaFlag 1.3.6.1.4.1.3085.3.1.4.2.5.2.1.1.8
Each bit within this object enables loggin for a specific area within RIP. Below is a list of the different areas available for logging within RIP and their corresponding bits identifiers. area bit ------------------------------------------------------ packet 0 policy 1 end of description.
OBJECT-TYPE    
  Unsigned32  

csRipGlobalConfLogLevelFlag 1.3.6.1.4.1.3085.3.1.4.2.5.2.1.1.9
Each bit within this object enables logging at a specific level for RIP. Below is a list of the different log levels available and their corresponding bits identifiers. area bit ------------------------------------------------------ critical 0 error 1 warning 2 information 3 debug 4 end of description.
OBJECT-TYPE    
  Unsigned32  

csRipIfConfTable 1.3.6.1.4.1.3085.3.1.4.2.5.2.2
A list of virtual interfaces which require separate configuration in RIP.
OBJECT-TYPE    
  SEQUENCE OF  
    CsRipIfConfEntry

csRipIfConfEntry 1.3.6.1.4.1.3085.3.1.4.2.5.2.2.1
A Single Routing Domain in a single Subnet.
OBJECT-TYPE    
  CsRipIfConfEntry  

csRipIfConfStatus 1.3.6.1.4.1.3085.3.1.4.2.5.2.2.1.1
Enable/Disable the use of RIP on this Virtual Interface.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csRipIfConfSend 1.3.6.1.4.1.3085.3.1.4.2.5.2.2.1.2
Enable/Disable the sending of RIP advertisements on this Virtual Interface.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csRipIfConfReceiveV1 1.3.6.1.4.1.3085.3.1.4.2.5.2.2.1.3
Enable/Disable the receiving of RIP V1 advertisements on this Virtual Interface.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csRipIfConfReceiveV2 1.3.6.1.4.1.3085.3.1.4.2.5.2.2.1.4
Enable/Disable the receiving of RIP V2 advertisements on this Virtual Interface.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csRipIfConfSendDefRoute 1.3.6.1.4.1.3085.3.1.4.2.5.2.2.1.5
Enable/Disable the advertisement of default routes.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csRipIfConfRcvDefRoute 1.3.6.1.4.1.3085.3.1.4.2.5.2.2.1.6
Enable/Disable the acceptance of advertised default routes.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csRipIfConfSplitHorizon 1.3.6.1.4.1.3085.3.1.4.2.5.2.2.1.7
Enable/Disable the Split Horizon feature.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csRipIfConfPoisonReverse 1.3.6.1.4.1.3085.3.1.4.2.5.2.2.1.8
Enable/Disable the Poison Reverse feature.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csRipIfConfFlashUpdate 1.3.6.1.4.1.3085.3.1.4.2.5.2.2.1.9
Enable/Disable the Flash Update feature.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csRipIfConfRipV1Compatibility 1.3.6.1.4.1.3085.3.1.4.2.5.2.2.1.10
Enable/Disable compatibility with RIPv1 routers.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csRipIfConfAuthPassword 1.3.6.1.4.1.3085.3.1.4.2.5.2.2.1.11
The password used in RIPv2 authentication. This object will return a zero length string in response to GET or GETNEXT requests.
OBJECT-TYPE    
  DisplayString  

csRipIfConfRowStatus 1.3.6.1.4.1.3085.3.1.4.2.5.2.2.1.12
RowStatus for this object. This is used to add/delete rows from this table. Setting it to create and go creates RIP on this Virtual Interface. Setting it to destroy removes RIP from this Virtual Interface.
OBJECT-TYPE    
  RowStatus  

csRipImpPolTable 1.3.6.1.4.1.3085.3.1.4.2.5.2.3
A set of Export Policies (see csExpPolTable) that are applied by rip.
OBJECT-TYPE    
  SEQUENCE OF  
    CsRipImpPolEntry

csRipImpPolEntry 1.3.6.1.4.1.3085.3.1.4.2.5.2.3.1
Each entry represents a single import policy applied by the rip layer on a Virtual Router.
OBJECT-TYPE    
  CsRipImpPolEntry  

csRipImpPolId 1.3.6.1.4.1.3085.3.1.4.2.5.2.3.1.1
The Import Policy (see the corresponding entry in csImpPolTable) that is applied to this Virtual Router.
OBJECT-TYPE    
  Integer32 1..65535  

csRipImpPolStatus 1.3.6.1.4.1.3085.3.1.4.2.5.2.3.1.2
The RowStatus object for this table. This is used to add and delete entries from this table.
OBJECT-TYPE    
  RowStatus  

csRipExpPolTable 1.3.6.1.4.1.3085.3.1.4.2.5.2.4
A set of Export Policies (see csExpPolTable) that are applied by rip.
OBJECT-TYPE    
  SEQUENCE OF  
    CsRipExpPolEntry

csRipExpPolEntry 1.3.6.1.4.1.3085.3.1.4.2.5.2.4.1
Each entry represents a single import policy applied by the rip layer on a Virtual Router.
OBJECT-TYPE    
  CsRipExpPolEntry  

csRipExpPolId 1.3.6.1.4.1.3085.3.1.4.2.5.2.4.1.1
The Export Policy (see the corresponding entry in csExpPolTable) that is applied to this Virtual Router.
OBJECT-TYPE    
  Integer32 1..65535  

csRipExpPolStatus 1.3.6.1.4.1.3085.3.1.4.2.5.2.4.1.2
The RowStatus object for this table. This is used to add and delete entries from this table.
OBJECT-TYPE    
  RowStatus  

csOrionRipEnd 1.3.6.1.4.1.3085.3.1.4.2.5.3
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionTcp 1.3.6.1.4.1.3085.3.1.4.2.6
OBJECT IDENTIFIER    

csOrionVPNVRouterTcpTable 1.3.6.1.4.1.3085.3.1.4.2.6.1
The table of TCP Parameters.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionVPNVRouterTcpEntry

csOrionVPNVRouterTcpEntry 1.3.6.1.4.1.3085.3.1.4.2.6.1.1
The entry of the table of TCP Parameters.
OBJECT-TYPE    
  CsOrionVPNVRouterTcpEntry  

csOrionVPNVRouterTcpRtoAlgorithm 1.3.6.1.4.1.3085.3.1.4.2.6.1.1.1
The algorithm used to determine the timeout value used for retransmitting unacknowledged octets.
OBJECT-TYPE    
  INTEGER other(1), constant(2), rsre(3), vanj(4)  

csOrionVPNVRouterTcpRtoMin 1.3.6.1.4.1.3085.3.1.4.2.6.1.1.2
The minimum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. More refined semantics for objects of this type depend upon the algorithm used to determine the retransmission timeout. In particular, when the timeout algorithm is rsre(3), an object of this type has the semantics of the LBOUND quantity described in RFC 793.
OBJECT-TYPE    
  Integer32  

csOrionVPNVRouterTcpRtoMax 1.3.6.1.4.1.3085.3.1.4.2.6.1.1.3
The maximum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. More refined semantics for objects of this type depend upon the algorithm used to determine the retransmission timeout. In particular, when the timeout algorithm is rsre(3), an object of this type has the semantics of the UBOUND quantity described in RFC 793.
OBJECT-TYPE    
  Integer32  

csOrionVPNVRouterTcpMaxConn 1.3.6.1.4.1.3085.3.1.4.2.6.1.1.4
The limit on the total number of TCP connections the entity can support. In entities where the maximum number of connections is dynamic, this object should contain the value -1.
OBJECT-TYPE    
  Integer32  

csOrionVPNVRouterTcpActiveOpens 1.3.6.1.4.1.3085.3.1.4.2.6.1.1.5
The number of times TCP connections have made a direct transition to the SYN-SENT state from the CLOSED state.
OBJECT-TYPE    
  Counter32  

csOrionVPNVRouterTcpPassiveOpens 1.3.6.1.4.1.3085.3.1.4.2.6.1.1.6
The number of times TCP connections have made a direct transition to the SYN-RCVD state from the LISTEN state.
OBJECT-TYPE    
  Counter32  

csOrionVPNVRouterTcpAttemptFails 1.3.6.1.4.1.3085.3.1.4.2.6.1.1.7
The number of times TCP connections have made a direct transition to the CLOSED state from either the SYN-SENT state or the SYN-RCVD state, plus the number of times TCP connections have made a direct transition to the LISTEN state from the SYN-RCVD state.
OBJECT-TYPE    
  Counter32  

csOrionVPNVRouterTcpEstabResets 1.3.6.1.4.1.3085.3.1.4.2.6.1.1.8
The number of times TCP connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state.
OBJECT-TYPE    
  Counter32  

csOrionVPNVRouterTcpCurrEstab 1.3.6.1.4.1.3085.3.1.4.2.6.1.1.9
The number of TCP connections for which the current state is either ESTABLISHED or CLOSE- WAIT.
OBJECT-TYPE    
  Gauge32  

csOrionVPNVRouterTcpInSegs 1.3.6.1.4.1.3085.3.1.4.2.6.1.1.10
The total number of segments received, including those received in error. This count includes segments received on currently established connections.
OBJECT-TYPE    
  Counter32  

csOrionVPNVRouterTcpOutSegs 1.3.6.1.4.1.3085.3.1.4.2.6.1.1.11
The total number of segments sent, including those on current connections but excluding those containing only retransmitted octets.
OBJECT-TYPE    
  Counter32  

csOrionVPNVRouterTcpRetransSegs 1.3.6.1.4.1.3085.3.1.4.2.6.1.1.12
The total number of segments retransmitted - that is, the number of TCP segments transmitted containing one or more previously transmitted octets.
OBJECT-TYPE    
  Counter32  

csOrionVPNVRouterTcpInErrs 1.3.6.1.4.1.3085.3.1.4.2.6.1.1.13
The total number of segments received in error (e.g., bad TCP checksums).
OBJECT-TYPE    
  Counter32  

csOrionVPNVRouterTcpOutRsts 1.3.6.1.4.1.3085.3.1.4.2.6.1.1.14
The number of TCP segments sent containing the RST flag.
OBJECT-TYPE    
  Counter32  

csOrionVPNVRouterTcpConnTable 1.3.6.1.4.1.3085.3.1.4.2.6.2
The table of addressing information relevant to Orion's IP addresses.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionVPNVRouterTcpConnEntry

csOrionVPNVRouterTcpConnEntry 1.3.6.1.4.1.3085.3.1.4.2.6.2.1
The addressing information for one of this Orion's IP addresses.
OBJECT-TYPE    
  CsOrionVPNVRouterTcpConnEntry  

csOrionVPNVRouterTcpConnState 1.3.6.1.4.1.3085.3.1.4.2.6.2.1.1
The state of this TCP connection. The only value which may be set by a management station is deleteTCB(12). Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to set this object to any other value. If a management station sets this object to the value deleteTCB(12), then this has the effect of deleting the TCB (as defined in RFC 793) of the corresponding connection on the managed node, resulting in immediate termination of the connection. As an implementation-specific option, a RST segment may be sent from the managed node to the other TCP endpoint (note however that RST egments are not sent reliably).
OBJECT-TYPE    
  INTEGER closed(1), listen(2), synSent(3), synReceived(4), established(5), finWait1(6), finWait2(7), closeWait(8), lastAck(9), closing(10), timeWait(11), deleteTCB(12)  

csOrionVPNVRouterTcpConnLocalAddress 1.3.6.1.4.1.3085.3.1.4.2.6.2.1.2
The local IP address for this TCP connection. In the case of a connection in the listen state which is willing to accept connections for any IP interface associated with the node, the value 0.0.0.0 is used.
OBJECT-TYPE    
  IpAddress  

csOrionVPNVRouterTcpConnLocalPort 1.3.6.1.4.1.3085.3.1.4.2.6.2.1.3
The local port number for this TCP connection.
OBJECT-TYPE    
  Integer32 0..65535  

csOrionVPNVRouterTcpConnRemAddress 1.3.6.1.4.1.3085.3.1.4.2.6.2.1.4
The remote IP address for this TCP connection.
OBJECT-TYPE    
  IpAddress  

csOrionVPNVRouterTcpConnRemPort 1.3.6.1.4.1.3085.3.1.4.2.6.2.1.5
The remote port number for this TCP connection.
OBJECT-TYPE    
  Integer32 0..65535  

csOrionTcpEnd 1.3.6.1.4.1.3085.3.1.4.2.6.3
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionUdp 1.3.6.1.4.1.3085.3.1.4.2.7
OBJECT IDENTIFIER    

csOrionVPNVRouterUdpTable 1.3.6.1.4.1.3085.3.1.4.2.7.1
The table of addressing information relevant to Orion's IP addresses.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionVPNVRouterUdpEntry

csOrionVPNVRouterUdpEntry 1.3.6.1.4.1.3085.3.1.4.2.7.1.1
The addressing information for one of this Orion's IP addresses.
OBJECT-TYPE    
  CsOrionVPNVRouterUdpEntry  

csOrionVPNVRouterUdpInDatagrams 1.3.6.1.4.1.3085.3.1.4.2.7.1.1.1
The total number of UDP datagrams delivered to UDP users.
OBJECT-TYPE    
  Counter32  

csOrionVPNVRouterUdpNoPorts 1.3.6.1.4.1.3085.3.1.4.2.7.1.1.2
The total number of received UDP datagrams for which there was no application at the destination port.
OBJECT-TYPE    
  Counter32  

csOrionVPNVRouterUdpInErrors 1.3.6.1.4.1.3085.3.1.4.2.7.1.1.3
The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port.
OBJECT-TYPE    
  Counter32  

csOrionVPNVRouterUdpOutDatagrams 1.3.6.1.4.1.3085.3.1.4.2.7.1.1.4
The total number of UDP datagrams sent from this entity.
OBJECT-TYPE    
  Counter32  

csOrionVPNVRouterUdpListenerTable 1.3.6.1.4.1.3085.3.1.4.2.7.2
The table of addressing information relevant to Orion's IP addresses.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionVPNVRouterUdpListenerEntry

csOrionVPNVRouterUdpListenerEntry 1.3.6.1.4.1.3085.3.1.4.2.7.2.1
The addressing information for one of this Orion's IP addresses.
OBJECT-TYPE    
  CsOrionVPNVRouterUdpListenerEntry  

csOrionVPNVRouterUdpListenerLocalAddress 1.3.6.1.4.1.3085.3.1.4.2.7.2.1.1
The local IP address for this UDP listener. In the case of a UDP listener which is willing to accept datagrams for any IP interface associated with the node, the value 0.0.0.0 is used.
OBJECT-TYPE    
  IpAddress  

csOrionVPNVRouterUdpListenerLocalPort 1.3.6.1.4.1.3085.3.1.4.2.7.2.1.2
The local port number for this UDP listener.
OBJECT-TYPE    
  Integer32 0..65535  

csOrionUdpEnd 1.3.6.1.4.1.3085.3.1.4.2.7.3
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionBgp 1.3.6.1.4.1.3085.3.1.4.2.8
OBJECT IDENTIFIER    

csBgpStats 1.3.6.1.4.1.3085.3.1.4.2.8.1
OBJECT IDENTIFIER    

csBgpConf 1.3.6.1.4.1.3085.3.1.4.2.8.2
OBJECT IDENTIFIER    

csBgpGen 1.3.6.1.4.1.3085.3.1.4.2.8.2.1
OBJECT IDENTIFIER    

csBgpGenTable 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1
This table contains general, virtual router specific, BGP information.
OBJECT-TYPE    
  SEQUENCE OF  
    CsBgpGenEntry

csBgpGenEntry 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1
Each entry contains general, virtual router specific BGP information for a single virtual router.
OBJECT-TYPE    
  CsBgpGenEntry  

csBgpGenStatus 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.1
This object controls the operation of BGP as a whole on this virtual router.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csBgpGenLocalAS 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.2
The local autonomous system number of this virtual router. This object will have a value of 0 if bgp is disabled. If bgp is enabled, this object cannot be set to 0.
OBJECT-TYPE    
  Integer32 1..65535  

csBgpGenClearConn 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.3
This object is used to clear one of the existing BGP connections. To clear a single connection, enter the ip address of the remote end of the connection. When this object is read (get, getnext), the value 0.0.0.0 will be returned.
OBJECT-TYPE    
  IpAddress  

csBgpGenDefaultMetric 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.4
The default metric used by the system. default value is -1 which indicates that the metric is not configured
OBJECT-TYPE    
  Integer32 -1..65535  

csBgpGenDefaultLocalPref 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.5
Default local preference of this BGP speaker default value is 100.
OBJECT-TYPE    
  Integer32 0..255  

csBgpGenConfedId 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.6
The ConfedId of this system. -1 indicates no confedId has been configured.
OBJECT-TYPE    
  Integer32 -1 | 1..65535  

csBgpGenDampEnable 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.7
This attribute is used to enable/disable route flap damping on this virtual router.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csBgpGenDampHalfLife 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.8
The time in seconds after which the penalty associated with a flapping route is reduced by one half. default value is 15 mintues.
OBJECT-TYPE    
  Integer32  

csBgpGenDampReuse 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.9
If the penalty of a flapping route that has been suppressed falls below the value configured by this attribute, then the route is unsuppressed. Default is 2.
OBJECT-TYPE    
  Integer32  

csBgpGenDampSuppress 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.10
If the penalty of a flapping route exceeds the value configured by this atttribute, the route is suppressed. Default is 3.
OBJECT-TYPE    
  Integer32  

csBgpGenDampMaxSuppress 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.11
The maximum time that the route can be suppressed. Default is 16.
OBJECT-TYPE    
  Integer32  

csBgpGenRowStatus 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.12
The RowStatus object for this table. This is used to add & remove rows from this table.
OBJECT-TYPE    
  RowStatus  

csBgpGenLogAreaFlag 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.13
Each bit within this object enables loggin for a specific area within BGP. Below is a list of the different areas available for logging within BGP and their corresponding bits identifiers. area bit ------------------------------------------------------ packet (all packets) 0 open (open packets) 1 update (update packets) 2 keepalive (keepalive packets) 3 notify (notify packets) 4 system (all system operations) 5 vpn-update (all vpn operations) 6 end of description.
OBJECT-TYPE    
  Unsigned32  

csBgpGenLogLevelFlag 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.14
Each bit within this object enables logging at a specific level for BGP. Below is a list of the different log levels available and their corresponding bits identifiers. area bit ------------------------------------------------------ critical 0 error 1 warning 2 information 3 debug 4 end of description.
OBJECT-TYPE    
  Unsigned32  

csBgpGenClearConnFlag 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.15
This object is used to indicate the set of BGP connections that need to be cleared. If set to 'nbr' the 'csBgpNbrClearConn' attribute must be set. If set to 'nbrGroup' the csBgpNbrClearNbrGroupName' must be set. When this object is read the value 'none' will be returned.
OBJECT-TYPE    
  INTEGER none(1), nbr(2), nbrGroup(3), all(4)  

csBgpGenClearNbrGroupName 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.16
This object is used to clear all the BGP connections that belong to the specified peer group.
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

csBgpGenHoldTimeConfigured 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.17
The configured holdtime to use with all the Neighbors. default value of -1 indicates that this attribute has not been configured (default value used will be 180 seconds). The timers configured for a Nbr or NbrGroup overrides timers configured for all BGP neighbors using this attribute
OBJECT-TYPE    
  Integer32 -1 | 0 | 20..65534  

csBgpGenKeepAliveConfigured 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.18
The configured Keepalive to use with all the Neighbors. default value of -1 indicates that this attribute has not been configured (default value used will be 60 seconds). The timers configured for a Nbr or NbrGroup overrides timers configured for all BGP neighbors using this attribute
OBJECT-TYPE    
  Integer32 -1 | 0 | 7..65534  

csBgpGenVpnLogAreaFlag 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.19
Each bit within this object enables logging for a specific area within BGP/VPN module. area bit ------------------------------------------------------ inbound-routes (updates recv) 0 outbound-routes (updates sent) 1 system (all system operations) 2 vrf (BGP to VRF interface) 3 bgp-peer (BGP/VPN peer mmgt) 4 tunnel (PE-PE tunnel mmgt) 5 end of description.
OBJECT-TYPE    
  Unsigned32  

csBgpGenMaxPfx 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.20
This attribute limits the maximum number of BGP routes that can be learnt. Any additional routes learnt from BGP will be 1. discarded and a warning message is generated. or 2. accepted and a warning message is generated -1 indicates that no maximum threshold has been set
OBJECT-TYPE    
  Integer32  

csBgpGenMaxPfxThreshold 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.21
If this attribute is configured, then when the number of routes learnt from all BGP peer reaches this threshold (percentage of csBgpMaxPfx) then a warning message is generated.
OBJECT-TYPE    
  Integer32 -1 | 1..100  

csBgpGenMaxPfxType 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.22
This attribute indicates the action that needs to be taken when the number of routes learnt from the bgp reaches the max prefix limit configured via 'csBgpGenMaxPfx' attribute. If this attribute is not set explicitly, and 'csBgpGenMaxPfx' attribute is set, this attribute defaults to warning-and-discard.
OBJECT-TYPE    
  INTEGER notconfigured(-1), warning-only(2), warning-and-discard(3)  

csBgpGenTableEnd 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.2
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csBgpNbr 1.3.6.1.4.1.3085.3.1.4.2.8.2.2
OBJECT IDENTIFIER    

csBgpNbrTable 1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1
This table contains information about the BGP Neighbors on each virtual router.
OBJECT-TYPE    
  SEQUENCE OF  
    CsBgpNbrEntry

csBgpNbrEntry 1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1
Each entry contains information about a single neighbor on a single virtual router.
OBJECT-TYPE    
  CsBgpNbrEntry  

csBgpNbrAddr 1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.1
The remote IP address of this entry's BGP neighbor.
OBJECT-TYPE    
  IpAddress  

csBgpNbrId 1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.2
The BGP Identifier of this entry's BGP neighbor.
OBJECT-TYPE    
  IpAddress  

csBgpNbrState 1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.3
The BGP Peer connection state.
OBJECT-TYPE    
  INTEGER idle(1), connect(2), active(3), opensent(4), openconfirm(5), established(6)  

csBgpNbrAdminStatus 1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.4
The desired state of the BGP connection. A transition from 'stop' to 'start' will cause the BGP Start Event to be generated. A transition from 'start' to 'stop' will cause the BGP Stop Event to be generated. This parameter can be used to restart BGP peer connections.
OBJECT-TYPE    
  INTEGER stop(1), start(2)  

csBgpNbrRemoteAS 1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.5
The remote autonomous system number.
OBJECT-TYPE    
  INTEGER 1..65535  

csBgpNbrMd5Password 1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.6
The Md5 password used to authenticate messages exchanged with this neighbor. If the neighbor belongs to a NbrGroup and this attribute is not configured, the Nbr inherits the group level value of this attribute.
OBJECT-TYPE    
  OCTET STRING SIZE(0..255)  

csBgpNbrRowStatus 1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.7
The RowStatus object for this table. This is used to add & remove rows from this table.
OBJECT-TYPE    
  RowStatus  

csBgpNbrGroupNm 1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.8
The Group to which the peer belongs. If the peer is not configured to any group an empty string is returned.
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

csBgpNbrHoldTimeConfigured 1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.9
The configured holdtime to use with this Neighbor default value of -1 indicates that this attribute has not been configured (default value used will be 180 seconds). If the neighbor belongs to a NbrGroup and this attribute is not set, the Nbr inherits the group level value of this attribute.
OBJECT-TYPE    
  Integer32 -1 | 0 | 20..65534  

csBgpNbrLocalAddr 1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.10
The IpAddress to be used at the local end of the connection with the bgp peer. If set to 0.0.0.0 it indicates that the LocalAddr is not configured. If the Nbr belongs to a NbrGroup, group level value of this attribute will override any value configured here.
OBJECT-TYPE    
  IpAddress  

csBgpNbrNextHopSelf 1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.11
To enable/disable this system to be the next hopself for an ebgp session with this peer. default is -1 which indicates not configured. If the neighbor belongs to a NbrGroup and this attribute is not set, the Nbr inherits the group level value of this attribute.
OBJECT-TYPE    
  INTEGER notconfigured(-1), enable(1), disable(2)  

csBgpNbrMhopGw 1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.12
To specify the gateway address if this ebgp neighbor is not directly connected to this system. If the MhopGw is set to 0.0.0.0, it indicates that the MhopGw is not configured. If the Nbr belongs to a NbrGroup and this attribute is not set, the Nbr inherits the group level value of this attribute.
OBJECT-TYPE    
  IpAddress  

csBgpNbrPassive 1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.13
If this attribute is set to enable then this BGP speaker will not try to open a connection with the neighbor. Instead it will wait for the neighbor to initiate a connection.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csBgpNbrMhopTTL 1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.14
To specify the maximum TTL value for the TTL in the IP Header for BGP packets. This attribute is applicable only for ebgp sessions. This attribute deprecates csBgpNbrMhopGw attribute. If this attribute is configured for a IBGP peer it has no effect. If the Nbr belongs to a NbrGroup and this attribute is not set, the Nbr inherits the group level value of this attribute
OBJECT-TYPE    
  INTEGER -1 | 1..255  

csBgpNbrIpv4AdminStatus 1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.15
If this attribute is set to disable then this BGP speaker will not try to send/recieve routes for IPv4 address family. The BGP speaker will participate in IPv4 address family with its peer only if this attribute is set to enable.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csBgpNbrVpnIpv4AdminStatus 1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.16
If this attribute is set to disable then this BGP speaker will not try to send/recieve routes for VPN IPv4 address family. The BGP speaker will participate in VPN IPv4 address family with its peer only if this attribute is set to enable.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csBgpNbrKeepAliveConfigured 1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.17
The configured keepalive to use with this Neighbor default value of -1 indicates that this attribute has not been configured (default value used will be 60 seconds). KeepAlive timer is normally derived from the negotiated holdtime and is 1/3 the value of negotiated holdtime. However if keepalive is configured the minmum of this value and 1/3 the value of negotiated holdtime is used. If the neighbor belongs to a NbrGroup and this attribute is not set, the Nbr inherits the group level value of this attribute.
OBJECT-TYPE    
  Integer32 -1 | 0 | 7..65534  

csBgpNbrRemovePrivateAs 1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.18
This attribute is used to strip private as numbers from the aspath advertised to the neighbor. This attribute is used only with EBGP neighbors. Configuring this attribute to an IBGP peer has no effect. default is -1 which indicates not configured. If the neighbor belongs to a NbrGroup and this attribute is not set, the Nbr inherits the group level value of this attribute.
OBJECT-TYPE    
  INTEGER notconfigured(-1), enable(1), disable(2)  

csBgpNbrLogAreaFlag 1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.19
Each bit within this object enables loggin for a specific area within BGP Neighbor. Below is a list of the different areas available for logging within BGP and their corresponding bits identifier. If the neighbor belongs to a NbrGroup and this attribute is not set, the Nbr inherits the group level value of this attribute. If the group level value is not set (or the neighbor does not belong to a NbrGroup) bgp global level value is inherited. area bit ------------------------------------------------------ packet (all packets) 0 open (open packets) 1 update (update packets) 2 keepalive (keepalive packets) 3 notify (notify packets) 4 system (all system operations) 5 end of description.
OBJECT-TYPE    
  Unsigned32  

csBgpNbrMaxPfx 1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.20
This attribute is used to set the maximum number of prefixes that can be learnt from this neighbor. If the neighbor advertises more than this number set in this attribute, the neighbor connection is closed and the state is set to Idle. Connection is not restored until user does a clearConnection. If this attribute is not set, the Nbr inherits the group level value of this attribute
OBJECT-TYPE    
  Integer32 -1..2147483647  

csBgpNbrVpnLogAreaFlag 1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.21
Each bit within this object enables loggin for a specific area within BGP Neighbor related VPN routing. If the neighbor belongs to a NbrGroup and this attribute is not set, the Nbr inherits the group level value of this attribute. If the group level value is not set (or the neighbor does not belong to a NbrGroup) bgp global level value is inherited. area bit ------------------------------------------------------ inbound-routes (updates recv) 0 outbound-routes (updates sent) 1 end of description.
OBJECT-TYPE    
  Unsigned32  

csBgpNbrMaxPfxThreshold 1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.22
If this attribute is configured, then when the number of routes learnt from this peer reaches this threshold (percentage of csBgpNbrMaxPfx) then a warning message is generated.
OBJECT-TYPE    
  Integer32 -1 | 1..100  

csBgpNbrMaxPfxType 1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.23
This attribute indicates the action that needs to be taken when the number of routes learnt from the neighbor reaches the max prefix limit configured via 'csBgpNbrMaxPfx' attribute. If this attribute is not set explicitly, and 'csBgpNbrMaxPfx' attribute is set, this attribute defaults to shutdown.
OBJECT-TYPE    
  INTEGER notconfigured(-1), shutdown(1), warning-only(2), warning-and-discard(3)  

csBgpNbrImpPolTable 1.3.6.1.4.1.3085.3.1.4.2.8.2.2.2
This table is used to configure the import policies applied to each BGP neighbor on each virtual router.
OBJECT-TYPE    
  SEQUENCE OF  
    CsBgpNbrImpPolEntry

csBgpNbrImpPolEntry 1.3.6.1.4.1.3085.3.1.4.2.8.2.2.2.1
Each entry contains information about a single policy applied to a single virtual router's BGP neighbor.
OBJECT-TYPE    
  CsBgpNbrImpPolEntry  

csBgpNbrImpPolId 1.3.6.1.4.1.3085.3.1.4.2.8.2.2.2.1.1
The identifier of the policy to apply to this neighbor. This identifies an entry in either the csBgpImpImpPolTable or the csBgpExpImpPolTable. If the Nbr belongs to a Group any import policies defined at the neighbor level overrides group level import policies. If no import policies are defined at the neighbor level group level policies are inherited.
OBJECT-TYPE    
  Integer32 1..65535  

csBgpNbrImpPolRowStatus 1.3.6.1.4.1.3085.3.1.4.2.8.2.2.2.1.2
The RowStatus object for this table. This is used to add & remove rows from this table.
OBJECT-TYPE    
  RowStatus  

csBgpNbrExpPolTable 1.3.6.1.4.1.3085.3.1.4.2.8.2.2.3
This table is used to configure the import policies applied to each BGP neighbor on each virtual router.
OBJECT-TYPE    
  SEQUENCE OF  
    CsBgpNbrExpPolEntry

csBgpNbrExpPolEntry 1.3.6.1.4.1.3085.3.1.4.2.8.2.2.3.1
Each entry contains information about a single policy applied to a single virtual router's BGP neighbor.
OBJECT-TYPE    
  CsBgpNbrExpPolEntry  

csBgpNbrExpPolId 1.3.6.1.4.1.3085.3.1.4.2.8.2.2.3.1.1
The identifier of the policy to apply to this neighbor. This identifies an entry in either the csBgpExpExpPolTable or the csBgpExpExpPolTable. If the Nbr belongs to a NbrGroup then any Export policies configured to this Nbr are ignored.i.e. Export policies defined at the group level takes precedence
OBJECT-TYPE    
  Integer32 1..65535  

csBgpNbrExpPolRowStatus 1.3.6.1.4.1.3085.3.1.4.2.8.2.2.3.1.2
The RowStatus object for this table. This is used to add & remove rows from this table.
OBJECT-TYPE    
  RowStatus  

csBgpPol 1.3.6.1.4.1.3085.3.1.4.2.8.2.3
OBJECT IDENTIFIER    

csBgpConfed 1.3.6.1.4.1.3085.3.1.4.2.8.2.4
OBJECT IDENTIFIER    

csBgpConfedASTable 1.3.6.1.4.1.3085.3.1.4.2.8.2.4.1
This table maintains a list of AS's which belong to the same confederation as this virtual router.
OBJECT-TYPE    
  SEQUENCE OF  
    CsBgpConfedASEntry

csBgpConfedASEntry 1.3.6.1.4.1.3085.3.1.4.2.8.2.4.1.1
Each entry contains as AS number which belongs to the same confederation as this virtual router.
OBJECT-TYPE    
  CsBgpConfedASEntry  

csBgpConfedAS 1.3.6.1.4.1.3085.3.1.4.2.8.2.4.1.1.1
This attribute identifies the AS which belongs to the same confederation as this virtual router.
OBJECT-TYPE    
  Integer32 1..65535  

csBgpConfedASRowStatus 1.3.6.1.4.1.3085.3.1.4.2.8.2.4.1.1.2
The RowStatus object for this table. This is used to add & remove rows from this table.
OBJECT-TYPE    
  RowStatus  

csBgpConfedASTableEnd 1.3.6.1.4.1.3085.3.1.4.2.8.2.4.2
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csBgpNetwork 1.3.6.1.4.1.3085.3.1.4.2.8.2.5
OBJECT IDENTIFIER    

csBgpNetworkTable 1.3.6.1.4.1.3085.3.1.4.2.8.2.5.1
This table maintains a list of IP Address/Mask which can be distributed from IGP into BGP.
OBJECT-TYPE    
  SEQUENCE OF  
    CsBgpNetworkEntry

csBgpNetworkEntry 1.3.6.1.4.1.3085.3.1.4.2.8.2.5.1.1
Each entry contains an IP Address/Mask that need to be sent via BGP.
OBJECT-TYPE    
  CsBgpNetworkEntry  

csBgpNetworkAddr 1.3.6.1.4.1.3085.3.1.4.2.8.2.5.1.1.1
The IP Address that needs to be redistrubted to BGP.
OBJECT-TYPE    
  IpAddress  

csBgpNetworkMask 1.3.6.1.4.1.3085.3.1.4.2.8.2.5.1.1.2
The IP Mask of the csBgpNetworkAddr that needs to be redistrubted to BGP.
OBJECT-TYPE    
  IpAddress  

csBgpNetworkRowStatus 1.3.6.1.4.1.3085.3.1.4.2.8.2.5.1.1.3
The RowStatus object for this table. This is used to add & remove rows from this table.
OBJECT-TYPE    
  RowStatus  

csBgpNetworkTableEnd 1.3.6.1.4.1.3085.3.1.4.2.8.2.5.2
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csBgpNbrGroup 1.3.6.1.4.1.3085.3.1.4.2.8.2.6
OBJECT IDENTIFIER    

csBgpNbrGroupTable 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1
This table contains information about the BGP Group's on a single virtual router.
OBJECT-TYPE    
  SEQUENCE OF  
    CsBgpNbrGroupEntry

csBgpNbrGroupEntry 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1
Each entry contains information about a single group on a single virtual router.
OBJECT-TYPE    
  CsBgpNbrGroupEntry  

csBgpNbrGroupName 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.1
The Name of the BGP Group
OBJECT-TYPE    
  DisplayString SIZE(1..32)  

csBgpNbrGroupAdminStatus 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.2
The desired state of the BGP connection. A transition from 'stop' to 'start' will cause the BGP Start Event to be generated. A transition from 'start' to 'stop' will cause the BGP Stop Event to be generated. This parameter can be used to restart BGP peer connections in the bgp group.
OBJECT-TYPE    
  INTEGER stop(1), start(2)  

csBgpNbrGroupRemoteAS 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.3
The remote autonomous system number of the group.
OBJECT-TYPE    
  INTEGER 1..65535  

csBgpNbrGroupMd5Password 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.4
The Md5 password used to authenticate messages exchanged with the neighbors defined in the group. This attribute can be over-ridden for each Nbr in the group by setting the csBgpNbrMd5Password Attribute
OBJECT-TYPE    
  OCTET STRING SIZE(0..255)  

csBgpNbrGroupRowStatus 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.5
The RowStatus object for this table. This is used to add & remove rows from this table.
OBJECT-TYPE    
  RowStatus  

csBgpNbrGroupHoldTimeConfigured 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.6
The configured holdtime to be used by the neighbors in this group. default value is -1 which indicates this is not configured and the neighbors in the group will be use a value of 180 seconds. This attribute can be over-ridden for each Nbr in the group by setting the csBgpNbrHoldTimeConfigured attribute.
OBJECT-TYPE    
  Integer32 -1 | 0 | 20..65535  

csBgpNbrGroupLocalAddr 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.7
The IpAddress to be used at the local end of the connection with the bgp peers in this group. If the LocalAddr is set to 0.0.0.0, it indicates that the LocalAddr is not configured.
OBJECT-TYPE    
  IpAddress  

csBgpNbrGroupNextHopSelf 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.8
To enable/disable this system to be the next hopself for an ebgp session with the bgp peers in this group. default is -1 which indicates not configured and disabled. This attribute can be over-ridden for each Nbr in the group by setting the csBgpNbrNextHopSelf attribute.
OBJECT-TYPE    
  INTEGER notconfigured(-1), enable(1), disable(2)  

csBgpNbrGroupMhopGw 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.9
To specify the gateway address if the ebgp neighbors belonging to this group are not directly connected to this system. If the MhopGw is set to 0.0.0.0, it indicates that the MhopGw is not configured. This attribute can be over-ridden for each Nbr in the group by setting the csBgpNbrMhopGw attribute.
OBJECT-TYPE    
  IpAddress  

csBgpNbrGroupMhopTTL 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.10
To specify the maximum TTL value for the TTL in the IP Header for BGP packets. This attribute is applicable only for ebgp sessions. This attribute deprecates csBgpNbrGroupMhopGw attribute. If this attribute is configured to an IBGP peer it has not effect. This attribute can be over-ridden for each Nbr in the group by setting the csBgpNbrMhopTTL attribute
OBJECT-TYPE    
  INTEGER -1 | 1..255  

csBgpNbrGroupIpv4AdminStatus 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.11
If this attribute is set to disable then this BGP speaker will not try to send/recieve routes for IPv4 address family. The BGP speaker will participate in IPv4 address family with its peer only if this attribute is set to enable.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csBgpNbrGroupVpnIpv4AdminStatus 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.12
If this attribute is set to disable then this BGP speaker will not try to send/recieve routes for VPN IPv4 address family. The BGP speaker will participate in VPN IPv4 address family with its peer only if this attribute is set to enable.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csBgpNbrGroupVpnIpv4AllowRfc2547Customers 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.13
This attribute specifies the scope of RFC2547bis customers provisioned by this BGP speaker. none : no rfc2547 customers all : all VRs which are requesting to participate other: access controlled by specifying explicit list of customers by name or group-names in csBgpVpnv4AccessMapTable.
OBJECT-TYPE    
  INTEGER none(1), all(2), other(3)  

csBgpNbrGroupVpnIpv4AllowVrmodelCustomers 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.14
This attribute specifies the scope of VR-model customers provisioned by this BGP speaker. none : no VR-model customers all : all VRs which are requesting to participate other: access controlled by specifying explicit list of customers by name or group-names in csBgpVpnv4AccessMapTable.
OBJECT-TYPE    
  INTEGER none(1), all(2), other(3)  

csBgpNbrGroupKeepAliveConfigured 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.15
The configured keepalive to be used by the neighbors in this group. default value is -1 which indicates this is not configured and the neighbors in the group will be use a value of 60 seconds. This attribute can be over-ridden for each Nbr in the group by setting the csBgpNbrKeepAliveConfigured attribute. be 180 seconds). KeepAlive timer is normally derived from the negotiated holdtime and is 1/3 the value of negotiated holdtime. However if keepalive is configured the minmum of this value and 1/3 the value of negotiated holdtime is used.
OBJECT-TYPE    
  Integer32 -1 | 0 | 7..65535  

csBgpNbrGroupRemovePrivateAs 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.16
This attribute is used to strip private as numbers from the aspath advertised to the neighbor. This attribute is used only with EBGP neighbors. Configuring this attribute to an IBGP peer has no effect. default is -1 which indicates not configured and disabled. This attribute can be over-ridden for each Nbr in the group by setting the csBgpNbrNextHopSelf attribute.
OBJECT-TYPE    
  INTEGER notconfigured(-1), enable(1), disable(2)  

csBgpNbrGroupLogAreaFlag 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.17
Each bit within this object enables loggin for a specific area within BGP Neighbor. Below is a list of the different areas available for logging within BGP and their corresponding bits identifier. If the group level value is not set bgp global level value is inherited. area bit ------------------------------------------------------ packet (all packets) 0 open (open packets) 1 update (update packets) 2 keepalive (keepalive packets) 3 notify (notify packets) 4 system (all system operations) 5 end of description.
OBJECT-TYPE    
  Unsigned32  

csBgpNbrGroupMaxPfx 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.18
This attribute is used to set the maximum number of prefixes that can be learnt from each neighbor in this group. If a neighbor advertises more than this number set in this attribute, then that neighbor connection is closed and the state is set to Idle. Connection is not restored until user does a clearConnection. The group level value can be over-ridden for each nbr by setting the csBgpNbrMaxPfx attribute
OBJECT-TYPE    
  Integer32 -1..2147483647  

csBgpNbrGroupVpnLogAreaFlag 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.19
Each bit within this object enables loggin for a specific area within BGP Neighbor related to VPN routing. If the group level value is not set bgp global level value is inherited. area bit ------------------------------------------------------ inbound-routes (updates recv) 0 outbound-routes (updates sent) 1 end of description.
OBJECT-TYPE    
  Unsigned32  

csBgpNbrGroupMaxPfxThreshold 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.20
If this attribute is configured, then when the number of routes learnt from the peers in this group reaches this threshold (percentage of csBgpNbrGroupMaxPfx) then a warning message is generated.
OBJECT-TYPE    
  Integer32 -1 | 1..100  

csBgpNbrGroupMaxPfxType 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.21
This attribute indicates the action that needs to be taken when the number of routes learnt from the peers in this group reaches the max prefix limit configured via 'csBgpNbrGroupMaxPfx' attribute. If this attribute is not set explicitly, and 'csBgpNbrGroupMaxPfx' attribute is set, this attribute defaults to shutdown.
OBJECT-TYPE    
  INTEGER notconfigured(-1), shutdown(1), warning-only(2), warning-and-discard(3)  

csBgpNbrGroupImpPolTable 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.2
This table is used to configure the import policies applied to each BGP Group on each virtual router.
OBJECT-TYPE    
  SEQUENCE OF  
    CsBgpNbrGroupImpPolEntry

csBgpNbrGroupImpPolEntry 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.2.1
Each entry contains information about a single policy applied to a single virtual router's BGP Group.
OBJECT-TYPE    
  CsBgpNbrGroupImpPolEntry  

csBgpNbrGroupImpPolId 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.2.1.1
The identifier of the policy to apply to this group. This identifies an entry in either the csBgpImpImpPolTable or the csBgpExpImpPolTable. The import polices defined at the group level can be over-ridden for each Nbr in the group by accessing the csBgpNbrImpPolTable.
OBJECT-TYPE    
  Integer32 1..65535  

csBgpNbrGroupImpPolRowStatus 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.2.1.2
The RowStatus object for this table. This is used to add & remove rows from this table.
OBJECT-TYPE    
  RowStatus  

csBgpNbrGroupExpPolTable 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.3
This table is used to configure the export policies applied to each BGP Group on each virtual router.
OBJECT-TYPE    
  SEQUENCE OF  
    CsBgpNbrGroupExpPolEntry

csBgpNbrGroupExpPolEntry 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.3.1
Each entry contains information about a single policy applied to a single virtual router's BGP Group.
OBJECT-TYPE    
  CsBgpNbrGroupExpPolEntry  

csBgpNbrGroupExpPolId 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.3.1.1
The identifier of the policy to apply to this group. This identifies an entry in either the csBgpExpExpPolTable or the csBgpExpExpPolTable. If the export policies are defined at the group level, all the neighbors in the group will inherit these export policies, even if export policies are defined at the Nbr level.
OBJECT-TYPE    
  Integer32 1..65535  

csBgpNbrGroupExpPolRowStatus 1.3.6.1.4.1.3085.3.1.4.2.8.2.6.3.1.2
The RowStatus object for this table. This is used to add & remove rows from this table.
OBJECT-TYPE    
  RowStatus  

csOrionBgpEnd 1.3.6.1.4.1.3085.3.1.4.2.8.3
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionIsis 1.3.6.1.4.1.3085.3.1.4.2.9
OBJECT IDENTIFIER    

csIsisSystem 1.3.6.1.4.1.3085.3.1.4.2.9.1
OBJECT IDENTIFIER    

csIsisSysTable 1.3.6.1.4.1.3085.3.1.4.2.9.1.1
The set of instances of the Integrated IS-IS protocol existing on the system.
OBJECT-TYPE    
  SEQUENCE OF  
    CsIsisSysEntry

csIsisSysEntry 1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1
Each row defines information specific to a single instance of the protocol existing on the system.
OBJECT-TYPE    
  CsIsisSysEntry  

csIsisSysInstance 1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.1
The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour.
OBJECT-TYPE    
  Integer32  

csIsisSysVersion 1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.2
The version number of the IS-IS protocol to which this instance conforms. This value must be set by the implementation when the row is valid.
OBJECT-TYPE    
  DisplayString  

csIsisSysType 1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.3
The type of this instance of the Integrated IS-IS protocol. This object follows the replaceOnlyWhileDisabled behaviour.
OBJECT-TYPE    
  INTEGER level1IS(1), level2IS(2), level1l2IS(3)  

csIsisSysID 1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.4
The ID for this instance of the Integrated IS-IS protocol. This value is appended to each of the instance's area addresses to form the Network Entity Titles valid for this instance. The derivation of a value for this object is implementation-specific. Some implementations may assign values and not permit write MAX-ACCESS, others may require the value to be set manually.
OBJECT-TYPE    
  SystemID  

csIsisSysMaxPathSplits 1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.5
Maximum number of paths with equal routing metric value which it is permitted to split between. This object follows the replaceOnlyWhileDisabled behaviour.
OBJECT-TYPE    
  Integer32 1..32  

csIsisSysMaxLSPGenInt 1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.6
Maximum interval, in seconds, between generated LSPs by this instance. This object follows the resettingTimer behaviour.This value should be always lesser than csIsisSysMaxLSPLifetime and greater than csIsisSysMinL1LSPGenInt
OBJECT-TYPE    
  Integer32 1..65535  

csIsisSysMaxLSPLifetime 1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.7
Maximum interval, in seconds, after which LSPs shall be aged out by this instance. This object follows the resettingTimer behaviour. This value should always be greater than csIsisSysMaxLSPGenInt
OBJECT-TYPE    
  Integer32 1..65535  

csIsisSysOrigL1LSPBuffSize 1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.8
The maximum size of Level 1 LSPs and SNPs originated by this instance. This object follows the replaceOnlyWhileDisabled behaviour.
OBJECT-TYPE    
  LSPBuffSize  

csIsisSysMaxAreaAddresses 1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.9
The maximum number of area addresses to be permitted for the area in which this instance exists. Note that all Intermediate Systems in the same area must have the same value configured for this attribute if correct operation is to be assumed. This object follows the replaceOnlyWhileDisabled behaviour.
OBJECT-TYPE    
  Integer32 0..254  

csIsisSysMinL1LSPGenInt 1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.10
Minimum interval, in seconds, between successive generation of L1 LSPs with the same LSPID by this instance. This object follows the resettingTimer behaviour.
OBJECT-TYPE    
  Integer32 1..65535  

csIsisSysMinL2LSPGenInt 1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.11
Minimum interval, in seconds, between successive generation of L2 LSPs with the same LSPID by this instance. This object follows the resettingTimer behaviour.
OBJECT-TYPE    
  Integer32 1..65535  

csIsisSysPollESHelloRate 1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.12
The value, in seconds, to be used for the suggested ES configuration timer in ISH PDUs when soliciting the ES configuration.
OBJECT-TYPE    
  Integer32 1..65535  

csIsisSysWaitTime 1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.13
Number of seconds to delay in waiting state before entering on state. This object follows the resettingTimer behaviour.
OBJECT-TYPE    
  Integer32 1..65535  

csIsisSysOperState 1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.14
The operational state of this instance of the Integrated IS-IS protocol. Setting this object to the value on when its current value is off enables operation of this instance of the Integrated IS-IS protocol.
OBJECT-TYPE    
  OperState  

csIsisSysL1State 1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.15
The state of the Level 1 database.
OBJECT-TYPE    
  LevelState  

csIsisSysCorrLSPs 1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.16
Number of corrupted LSPs detected.
OBJECT-TYPE    
  Counter32  

csIsisSysLSPL1DbaseOloads 1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.17
Number of times the LSP L1 database has become overloaded.
OBJECT-TYPE    
  Counter32  

csIsisSysManAddrDropFromAreas 1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.18
Number of times a manual address has been dropped from the area.
OBJECT-TYPE    
  Counter32  

csIsisSysAttmptToExMaxSeqNums 1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.19
Number of times the IS has attempted to exceed the maximum sequence number.
OBJECT-TYPE    
  Counter32  

csIsisSysSeqNumSkips 1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.20
Number of times a sequence number skip has occurred.
OBJECT-TYPE    
  Counter32  

csIsisSysOwnLSPPurges 1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.21
Number of times a zero-aged copy of the system's own LSP is received from some other node.
OBJECT-TYPE    
  Counter32  

csIsisSysIDFieldLenMismatches 1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.22
Number of times a PDU is received with a different value for ID field length to that of the receiving system.
OBJECT-TYPE    
  Counter32  

csIsisSysMaxAreaAddrMismatches 1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.23
Number of times a PDU is received with a different value for MaximumAreaAddresses from that of the receiving system.
OBJECT-TYPE    
  Counter32  

csIsisSysOrigL2LSPBuffSize 1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.24
The maximum size of Level 2 LSPs and SNPs originated by this system. This object follows the replaceOnlyWhileDisabled behaviour.
OBJECT-TYPE    
  LSPBuffSize  

csIsisSysL2State 1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.25
The state of the Level 2 database.
OBJECT-TYPE    
  LevelState  

csIsisSysLSPL2DbaseOloads 1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.26
Number of times the Level 2 LSP database has become overloaded.
OBJECT-TYPE    
  Counter32  

csIsisSysAuthAreaType 1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.27
What authentication scheme, if any, is used to protect Level 1 Link State packets?
OBJECT-TYPE    
  INTEGER none(1), plaintext(2), md5(3)  

csIsisSysAuthAreaTransPwd 1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.28
The value to be used as the Authentication Key in Level 1 Link State Packets whenever the value of csIsisSysAuthAreaType has a value of plaintext. A modification of csIsisSysAuthAreaType does not modify the csIsisSysAuthAreaTransPwd value. Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object.
OBJECT-TYPE    
  OCTET STRING SIZE(0..255)  

csIsisSysAuthDomainType 1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.29
What authentication scheme, if any, is used to protect Level 2 Link State packets?
OBJECT-TYPE    
  INTEGER none(1), plaintext(2), md5(3)  

csIsisSysAuthDomainTransPwd 1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.30
The value to be used as the Authentication Key in Level 2 Link State Packets whenever the value of csIsisSysAuthDomainType has a value of plaintext. A modification of csIsisSysAuthDomainType does not modify the csIsisSysAuthDomainTransPwd value. Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object.
OBJECT-TYPE    
  OCTET STRING SIZE(0..255)  

csIsisSysAuthFails 1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.31
The number of authentication failures recognized by this instance of the protocol.
OBJECT-TYPE    
  Counter32  

csIsisSysLSPIgnoreErrors 1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.32
If true, allow the router to ignore IS-IS link state packets (LSPs) that are received with internal checksum errors rather than purging the LSPs.
OBJECT-TYPE    
  TruthValue  

csIsisSysLogAdjacencyChanges 1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.33
If true, causes IS-IS to generate a log message when an IS-IS adjacency changes state (up or down).
OBJECT-TYPE    
  TruthValue  

csIsisSysPartChanges 1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.34
partition changes
OBJECT-TYPE    
  Counter32  

csIsisSysMaxAreaCheck 1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.35
When on, enables checking of maximum area addresses per IS version of ISO10589.
OBJECT-TYPE    
  TruthValue  

csIsisSysNextCircIndex 1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.36
This object is used to assign values to csIsisCircIndex as described in 'Textual Conventions for SNMPv2'. The network manager reads this object, and then writes the value back in a SET that creates a new instance of csIsisCircEntry. If the SET fails with the code 'inconsistentValue', then the process must be repeated; If the SET succeeds, then the ob- ject is incremented, and the new instance is created according to the manager's directions.
OBJECT-TYPE    
  TestAndIncr  

csIsisSysExistState 1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.37
The state of the ISIS router. Turning this off forces the router to forget all current state
OBJECT-TYPE    
  RowStatus  

csIsisSysAdminStatus 1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.38
This object is used to enable/disable IS-IS routing on this Virtual Router.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csIsisSysSPFL1Int 1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.39
This object is used for SPF Level 1 Interval, it is in seconds.
OBJECT-TYPE    
  Integer32 1..120  

csIsisSysSPFL2Int 1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.40
This object is used for SPF Level 2 Interval, it is in seconds.
OBJECT-TYPE    
  Integer32 1..120  

csIsisSysSPFStartInt 1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.41
The number in seconds system will wait to start SPF Interval calculation.
OBJECT-TYPE    
  Integer32 1..120  

csIsisSysDefInfoOrig 1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.42
When on, distributes the default route into the IS-IS routing domain.
OBJECT-TYPE    
  TruthValue  

csIsisSysL2TO1Leak 1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.43
When on, enables Level-2 to Level-1 route leaking.
OBJECT-TYPE    
  TruthValue  

csIsisSysLogAreaFlag 1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.44
Each bit within this object enables loggin for a specific area within ISIS. Below is a list of the different areas available for logging within BGP and their corresponding bits identifiers. area bit ------------------------------------------------------ system 0 adj 1 lsp 2 snp 3 spf 4 packet recv 5 packet send 6 end of description.
OBJECT-TYPE    
  Unsigned32  

csIsisSysLogLevelFlag 1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.45
Each bit within this object enables logging at a specific level for ISIS. Below is a list of the different log levels available and their corresponding bits identifiers. area bit ------------------------------------------------------ critical 0 error 1 warning 2 information 3 detail 4 debug 5 end of description.
OBJECT-TYPE    
  Unsigned32  

csIsisManAreaAddrTable 1.3.6.1.4.1.3085.3.1.4.2.9.1.2
The set of manual area addresses configured on this Intermediate System.
OBJECT-TYPE    
  SEQUENCE OF  
    CsIsisManAreaAddrEntry

csIsisManAreaAddrEntry 1.3.6.1.4.1.3085.3.1.4.2.9.1.2.1
Each entry contains one area address manually configured on this system
OBJECT-TYPE    
  CsIsisManAreaAddrEntry  

csIsisManAreaAddrSysInstance 1.3.6.1.4.1.3085.3.1.4.2.9.1.2.1.1
The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour.
OBJECT-TYPE    
  Integer32  

csIsisManAreaAddr 1.3.6.1.4.1.3085.3.1.4.2.9.1.2.1.2
A manually configured area address for this system. This object follows the index behaviour. Note: an index for the entry {1, {49.0001} active} in this table would be the ordered pair (1, (0x03 0x49 0x00 0x01)), as the length of an Octet string is part of the OID.
OBJECT-TYPE    
  OSINSAddress  

csIsisManAreaAddrExistState 1.3.6.1.4.1.3085.3.1.4.2.9.1.2.1.3
The state of the csIsisManAreaAddrEntry. This object follows the Row Status behaviour. If an attempt is made to set this object to the value off when the corresponding csIsisManAreaAddrEntry is the only valid entry for this instance and when the corresponding ISIS instance has csIsisSysOperState set to On then the attempt is rejected.
OBJECT-TYPE    
  RowStatus  

csIsisAreaAddrTable 1.3.6.1.4.1.3085.3.1.4.2.9.1.3
The union of the sets of area addresses reported in all Level 1 LSPs received by this instance of the protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    CsIsisAreaAddrEntry

csIsisAreaAddrEntry 1.3.6.1.4.1.3085.3.1.4.2.9.1.3.1
Each entry contains one area address reported in a Level 1 LSP received by this instance of the protocol.
OBJECT-TYPE    
  CsIsisAreaAddrEntry  

csIsisAreaAddrSysInstance 1.3.6.1.4.1.3085.3.1.4.2.9.1.3.1.1
The unique identifier of the Integrated IS-IS instance to which this row corresponds.
OBJECT-TYPE    
  Integer32  

csIsisAreaAddr 1.3.6.1.4.1.3085.3.1.4.2.9.1.3.1.2
An area address reported in a Level 1 LSP received by this instance of the protocol.
OBJECT-TYPE    
  OSINSAddress  

csIsisSysProtSuppTable 1.3.6.1.4.1.3085.3.1.4.2.9.1.4
This table contains the manually configured set of protocols supported by each instance of the Integrated ISIS protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    CsIsisSysProtSuppEntry

csIsisSysProtSuppEntry 1.3.6.1.4.1.3085.3.1.4.2.9.1.4.1
Each entry contains one protocol supported by an instance of the Integrated ISIS protocol.
OBJECT-TYPE    
  CsIsisSysProtSuppEntry  

csIsisSysProtSuppSysInstance 1.3.6.1.4.1.3085.3.1.4.2.9.1.4.1.1
The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour.
OBJECT-TYPE    
  Integer32  

csIsisSysProtSuppProtocol 1.3.6.1.4.1.3085.3.1.4.2.9.1.4.1.2
One supported protocol. This object follows the index behaviour.
OBJECT-TYPE    
  SupportedProtocol  

csIsisSysProtSuppExistState 1.3.6.1.4.1.3085.3.1.4.2.9.1.4.1.3
The state of the csIsisSysProtSuppEntry. This object follows the RowStatus behavior.
OBJECT-TYPE    
  RowStatus  

csIsisL2SummAddrTable 1.3.6.1.4.1.3085.3.1.4.2.9.1.5
The set of IP summary addresses to use in forming the contents of Level 2 LSPs originated by this level 2 Intermediate System.
OBJECT-TYPE    
  SEQUENCE OF  
    CsIsisL2SummAddrEntry

csIsisL2SummAddrEntry 1.3.6.1.4.1.3085.3.1.4.2.9.1.5.1
Each entry contains one IP summary address.
OBJECT-TYPE    
  CsIsisL2SummAddrEntry  

csIsisL2SummAddrSysInstance 1.3.6.1.4.1.3085.3.1.4.2.9.1.5.1.1
The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviours.
OBJECT-TYPE    
  Integer32  

csIsisL2SummAddress 1.3.6.1.4.1.3085.3.1.4.2.9.1.5.1.2
The IP Address value for this summary address. This object follows the index behaviour.
OBJECT-TYPE    
  IpAddress  

csIsisL2SummAddrMask 1.3.6.1.4.1.3085.3.1.4.2.9.1.5.1.3
The mask value for this summary address. This object follows the index behaviour.
OBJECT-TYPE    
  IpAddress  

csIsisL2SummAddrExistState 1.3.6.1.4.1.3085.3.1.4.2.9.1.5.1.4
The existence state of this summary address. This object follows the row status behaviour.
OBJECT-TYPE    
  RowStatus  

csIsisL2SummAddrOperState 1.3.6.1.4.1.3085.3.1.4.2.9.1.5.1.5
The operational state of this entry. This object follows the operationalState behaviour. When the operational state changes if this would cause the contents of Level 2 LSPs originated by the system to change then those new LSPs must be generated and sent as soon as is permitted by the ISIS protocol.
OBJECT-TYPE    
  OperState  

csIsisL2SummAddrDefaultMetric 1.3.6.1.4.1.3085.3.1.4.2.9.1.5.1.6
The default metric value to announce this summary address with in Level 2 LSPs generated by this system.
OBJECT-TYPE    
  DefaultMetric  

csIsisL2SummAddrDelayMetric 1.3.6.1.4.1.3085.3.1.4.2.9.1.5.1.7
The delay metric value to announce this summary address with in Level 2 LSPs generated by this system. The value of zero is reserved to indicate that this metric is not supported.
OBJECT-TYPE    
  OtherMetric  

csIsisL2SummAddrExpenseMetric 1.3.6.1.4.1.3085.3.1.4.2.9.1.5.1.8
The expense metric value to announce this summary address with in Level 2 LSPs generated by this system. The value of zero is reserved to indicate that this metric is not supported.
OBJECT-TYPE    
  OtherMetric  

csIsisL2SummAddrErrorMetric 1.3.6.1.4.1.3085.3.1.4.2.9.1.5.1.9
The error metric value to announce this summary address with in Level 2 LSPs generated by this system. The value of zero is reserved to indicate that this metric is not supported.
OBJECT-TYPE    
  OtherMetric  

csIsisExpPolTable 1.3.6.1.4.1.3085.3.1.4.2.9.1.6
A set of Export Policies (see csExpPolTable) that are applied by ISIS.
OBJECT-TYPE    
  SEQUENCE OF  
    CsIsisExpPolEntry

csIsisExpPolEntry 1.3.6.1.4.1.3085.3.1.4.2.9.1.6.1
Each entry represents a single export policy applied by the ISIS layer on a Virtual Router.
OBJECT-TYPE    
  CsIsisExpPolEntry  

csIsisExpPolId 1.3.6.1.4.1.3085.3.1.4.2.9.1.6.1.1
The Export Policy (see the corresponding entry in csExpPolTable) that is applied to this Virtual Router.
OBJECT-TYPE    
  Integer32  

csIsisExpPolStatus 1.3.6.1.4.1.3085.3.1.4.2.9.1.6.1.2
The RowStatus object for this table. This is used to add and delete entries from this table.
OBJECT-TYPE    
  RowStatus  

csIsisExpPolTableEnd 1.3.6.1.4.1.3085.3.1.4.2.9.1.7
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csIsisCirc 1.3.6.1.4.1.3085.3.1.4.2.9.2
OBJECT IDENTIFIER    

csIsisCircTable 1.3.6.1.4.1.3085.3.1.4.2.9.2.1
The table of circuits used by each instance of Integrated IS-IS on this system.
OBJECT-TYPE    
  SEQUENCE OF  
    CsIsisCircEntry

csIsisCircEntry 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1
An csIsisCircEntry exists for each circuit used by Integrated IS-IS on this system.
OBJECT-TYPE    
  CsIsisCircEntry  

csIsisCircSysInstance 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.1
The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour.
OBJECT-TYPE    
  Integer32  

csIsisCircIndex 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.2
The identifier of this circuit, unique within the instance of the protocol. This object follows the index behaviour. This is for SNMP Indexing purposes only and has no relation to any protocol value.
OBJECT-TYPE    
  Integer32  

csIsisCircIfIndex 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.3
The value of ifIndex for the interface to which this circuit corresponds. This object cannot be modified after creation
OBJECT-TYPE    
  Integer32  

csIsisCircIfSubIndex 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.4
A specifier for the part of the interface ifIndex to which this circuit corresponds, such as a DLCI or VPI/VCI. This object cannot be modified after creation
OBJECT-TYPE    
  Integer32  

csIsisCircLocalID 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.5
An identification that can be used in protocol packets to identify a circuit. Implementations may devise ways to assure that this value is suitable for the circuit it is used on. LAN packets only have space for 8 bits. Values of csIsisCircLocalID do not need to be unique. They are only required to differ on LANs where the Intermediate System is the Designated Intermediate System.
OBJECT-TYPE    
  Integer32  

csIsisCircOperState 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.6
The operational state of the circuit. This object follows the operationalState behaviour.
OBJECT-TYPE    
  OperState  

csIsisCircExistState 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.7
The existence state of this circuit. This object follows the Row Status behaviour.
OBJECT-TYPE    
  RowStatus  

csIsisCircType 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.8
The type of the circuit. This object follows the replaceOnlyWhileDisabled behaviour. The type specified must be compatible with the type of the interface defined by the value of csIsisCircIfIndex.
OBJECT-TYPE    
  INTEGER broadcast(1), ptToPt(2), staticIn(3), staticOut(4), dA(5)  

csIsisCircL1DefaultMetric 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.9
The default metric value of this circuit for Level 1 traffic.
OBJECT-TYPE    
  DefaultMetric  

csIsisCircL1DelayMetric 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.10
The delay metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported.
OBJECT-TYPE    
  OtherMetric  

csIsisCircL1ExpenseMetric 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.11
The expense metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported.
OBJECT-TYPE    
  OtherMetric  

csIsisCircL1ErrorMetric 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.12
The error metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported.
OBJECT-TYPE    
  OtherMetric  

csIsisCircExtDomain 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.13
If true, suppress normal transmission of and interpretation of Intra-domain ISIS PDUs on this circuit.
OBJECT-TYPE    
  TruthValue  

csIsisCircAdjChanges 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.14
The number of times an adjacency state change has occurred on this circuit.
OBJECT-TYPE    
  Counter32  

csIsisCircInitFails 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.15
The number of times initialization of this circuit has failed.
OBJECT-TYPE    
  Counter32  

csIsisCircRejAdjs 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.16
The number of times an adjacency has been rejected on this circuit.
OBJECT-TYPE    
  Counter32  

csIsisCircOutCtrlPDUs 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.17
The number of IS-IS control PDUs sent on this circuit.
OBJECT-TYPE    
  Counter32  

csIsisCircInCtrlPDUs 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.18
The number of IS-IS control PDUs received on this circuit.
OBJECT-TYPE    
  Counter32  

csIsisCircIDFieldLenMismatches 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.19
The number of times an IS-IS control PDU with an ID field length different to that for this system has been received.
OBJECT-TYPE    
  Counter32  

csIsisCircL2DefaultMetric 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.20
The default metric value of this circuit for level 2 traffic.
OBJECT-TYPE    
  DefaultMetric  

csIsisCircL2DelayMetric 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.21
The delay metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported.
OBJECT-TYPE    
  OtherMetric  

csIsisCircL2ExpenseMetric 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.22
The expense metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported.
OBJECT-TYPE    
  OtherMetric  

csIsisCircL2ErrorMetric 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.23
The error metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported.
OBJECT-TYPE    
  OtherMetric  

csIsisCircManL2Only 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.24
When true, indicates that this circuit is to be used only for level 2. This object follows the replaceOnlyWhileDisabled behaviour.
OBJECT-TYPE    
  TruthValue  

csIsisCircL1ISPriority 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.25
The priority for becoming LAN Level 1 Deignated Intermediate System on a broadcast circuit.
OBJECT-TYPE    
  ISPriority  

csIsisCircL1CircID 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.26
The LAN ID allocated by the LAN Level 1 Designated Intermediate System. Where this system is not aware of the value (because it is not participating in the Level 1 Designated Intermediate System election), this object has the value which would be proposed for this circuit (i.e. the concatenation of the local system ID and the one octet local Circuit ID for this circuit.
OBJECT-TYPE    
  CircuitID  

csIsisCircL1DesIS 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.27
The ID of the LAN Level 1 Designated Intermediate System on this circuit. If, for any reason this system is not partaking in the relevant Designated Intermediate System election process, then the value returned is the zero length OCTET STRING.
OBJECT-TYPE    
  SystemID  

csIsisCircLANL1DesISChanges 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.28
The number of times the LAN Level 1 Designated Intermediate System has changed.
OBJECT-TYPE    
  Counter32  

csIsisCircL2ISPriority 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.29
The priority for becoming LAN level 2 Designated Intermediate System.
OBJECT-TYPE    
  ISPriority  

csIsisCircL2CircID 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.30
The LAN ID allocated by the LAN Level 2 Designated Intermediate System. Where this system is not aware of this value (because it is not participating in the Level 2 Designated Intermediate System election), this object has the value which would be proposed for this circuit (i.e. the concatenation of the local system ID and the one octet local Circuit ID for this circuit.
OBJECT-TYPE    
  CircuitID  

csIsisCircL2DesIS 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.31
The ID of the LAN Level 2 Designated Intermediate System on this circuit. If, for any reason, this system is not partaking in the relevant Designated Intermediate System election process, then the value returned is the zero length OCTET STRING.
OBJECT-TYPE    
  SystemID  

csIsisCircLANL2DesISChanges 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.32
The number of times the LAN Level 2 Designated Intermediate System has changed.
OBJECT-TYPE    
  Counter32  

csIsisCircMCAddr 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.33
Specifies which type of multicast address will be used for sending HELLO PDUs on this circuit.
OBJECT-TYPE    
  INTEGER group(1), functional(2)  

csIsisCircPtToPtCircID 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.34
The ID of the circuit allocated during initialization. If no value has been negotiated (either because the adjacency is to an End System, or because initialization has not yet successfully completed), this object has the value which would be proposed for this circuit (i.e. the concatenation of the local system ID and the one octet local Circuit ID for this circuit.
OBJECT-TYPE    
  CircuitID  

csIsisCircL1HelloTimer 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.35
Maximum period, in milliseconds, between Level 1 IIH PDUs on multiaccess networks. It is also used as the period between Hellos on point to point circuits. This object follows the resettingTimer behaviour.
OBJECT-TYPE    
  Integer32 10..600000  

csIsisCircL2HelloTimer 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.36
Maximum period, in milliseconds, between Level 1 IIH PDUs on multiaccess networks. This object follows the resettingTimer behaviour.
OBJECT-TYPE    
  Integer32 10..600000  

csIsisCircL1HelloMultiplier 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.37
This value is multiplied by the corresponding HelloTimer and the result in seconds (rounded up) is used as the holding time in transmitted hellos, to be used by receivers of hello packets from this IS
OBJECT-TYPE    
  Integer32 2..100  

csIsisCircL2HelloMultiplier 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.38
This value is multiplied by the corresponding HelloTimer and the result in seconds (rounded up) is used as the holding time in transmitted hellos, to be used by receivers of hello packets from this IS
OBJECT-TYPE    
  Integer32 2..100  

csIsisCircDRL1HelloTimer 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.39
Period, in milliseconds, between Level 1 PDUs on multiaccess networks when this IS is the Designated Intermediate System. This object follows the resettingTimer behaviour.
OBJECT-TYPE    
  Integer32 10..120000  

csIsisCircDRL2HelloTimer 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.40
Period, in milliseconds, between Level 2 PDUs on multiaccess networks when this IS is the Designated Intermediate System. This object follows the resettingTimer behaviour.
OBJECT-TYPE    
  Integer32 10..120000  

csIsisCircMinBroadLSPTransInt 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.41
Minimum interval, in milliseconds, between transmission of LSPs on a broadcast circuit. This object follows the resettingTimer behaviour. This timer shall be capable of a resolution not coarser than 10 milliseconds.
OBJECT-TYPE    
  Integer32 1..1000  

csIsisCircL1MinLSPTransInt 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.42
Minimum interval, in seconds, between re-transmission of an Level 1 LSP. This object follows the resettingTimer behaviour.
OBJECT-TYPE    
  Integer32 1..300  

csIsisCircL2MinLSPTransInt 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.43
Minimum interval, in seconds, between re-transmission of an Level 2 LSP. This object follows the resettingTimer behaviour.
OBJECT-TYPE    
  Integer32 1..300  

csIsisCircL1CSNPInterval 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.44
Interval of time, in seconds, between transmission of Level 1 CSNPs on multiaccess networks if this router is the designated router.
OBJECT-TYPE    
  Integer32 1..600  

csIsisCircL2CSNPInterval 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.45
Interval of time, in seconds, between transmission of Level 2 CSNPs on multiaccess networks if this router is the designated router.
OBJECT-TYPE    
  Integer32 1..600  

csIsisCircL1PartSNPInterval 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.46
Minimum interval between sending Level 1 Partial Sequence Number PDUs. This object follows the resettingTimer behaviour.
OBJECT-TYPE    
  Integer32 1..120  

csIsisCircL2PartSNPInterval 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.47
Minimum interval between sending Level 2 Partial Sequence Number PDUs. This object follows the resettingTimer behaviour.
OBJECT-TYPE    
  Integer32 1..120  

csIsisCircLSPThrottle 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.48
Minimal interval of time, in milliseconds, between transmissions of LSPs on a point to point interface.
OBJECT-TYPE    
  Integer32 1..65535  

csIsisCircPassiveCircuit 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.49
Should we include this interface in LSPs, even if it is not running the ISIS Protocol?
OBJECT-TYPE    
  TruthValue  

csIsisCircMeshGroupEnabled 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.50
Is this port a member of a mesh group, or blocked? Circuits in the same mesh group act as a virtual multiaccess network. LSPs seen on one circuit in a mesh group will not be flooded to another circuit in the same mesh group.
OBJECT-TYPE    
  INTEGER inactive(1), blocked(2), set(3)  

csIsisCircMeshGroup 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.51
Circuits in the same mesh group act as a virtual multiaccess network. LSPs seen on one circuit in a mesh group will not be flooded to another circuit in the same mesh group. If csIsisCircMeshGroupEnabled is false, this value is ignored.
OBJECT-TYPE    
  Integer32 1..2000000000  

csIsisCircL1AuthType 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.52
What authentication scheme, if any, is used to protect Level 1 and Point-to-Point hello packets?
OBJECT-TYPE    
  INTEGER none(1), plaintext(2)  

csIsisCircL1Password 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.53
The value to be used as the Authentication Key in Level 1 and Point-to-Point hello packets whenever the corresponding instance of csIsisCircL1AuthType has a value of plaintext. A modification of the corresponding instance of csIsisCircL1AuthType does not modify the csIsisCircL1Password value. Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object.
OBJECT-TYPE    
  OCTET STRING SIZE(0..255)  

csIsisCircL2AuthType 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.54
What authentication scheme, if any, is used to protect Level 2 hello packets?
OBJECT-TYPE    
  INTEGER none(1), plaintext(2)  

csIsisCircL2Password 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.55
The value to be used as the Authentication Key in Level 1 Hello packets whenever the corresponding instance of csIsisCircL1AuthType has a value of plaintext. A modification of the corresponding instance of csIsisCircL1AuthType does not modify the csIsisCircL1Password value. Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object.
OBJECT-TYPE    
  OCTET STRING SIZE(0..255)  

csIsisCircSmallHellos 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.56
Can we send unpadded hellos on LAN circuits? Off means LAN Hellos must be padded.
OBJECT-TYPE    
  OperState  

csIsisManAdjNeighNSAP 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.57
The address of the neighbour if this is a manual adjacency. This object follows the replaceOnlyWhileDisabled behaviour.
OBJECT-TYPE    
  OSINSAddress  

csIsisManAdjNeighSNPA 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.58
The SNPA of the neighbour if this is a manual adjacency. This object follows the replaceOnlyWhileDisabled behaviour.
OBJECT-TYPE    
  SNPAAddress  

csIsisCircIPEncaps 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.59
Should we encapsulate IS-IS in IP packets?
OBJECT-TYPE    
  TruthValue  

csIsisCircUpTime 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.60
The amount of time in seconds since this circuit entered state 'up'. Note: This can be implemented as start time less the current time.
OBJECT-TYPE    
  Integer32  

csIsisCircIpAddress 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.61
The IP Address of the VI that IS-IS is enabled on.
OBJECT-TYPE    
  IpAddress  

csIsisCircLevel 1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.62
This is the IS-IS circuit level. Level-1 only => isisCircLevel = 1, Level-2 only => isisCircLevel = 2, Level-1 or 2 => isisCircLevel = 3.
OBJECT-TYPE    
  INTEGER level-1(1), level-2(2), level-1-2(3)  

csIsisCircTableEnd 1.3.6.1.4.1.3085.3.1.4.2.9.2.2
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csIsisISAdj 1.3.6.1.4.1.3085.3.1.4.2.9.3
OBJECT IDENTIFIER    

csIsisISAdjTable 1.3.6.1.4.1.3085.3.1.4.2.9.3.1
The table of adjacencies to Intermediate Systems.
OBJECT-TYPE    
  SEQUENCE OF  
    CsIsisISAdjEntry

csIsisISAdjEntry 1.3.6.1.4.1.3085.3.1.4.2.9.3.1.1
Each entry corresponds to one adjacency to an Intermediate System on this system.
OBJECT-TYPE    
  CsIsisISAdjEntry  

csIsisISAdjSysInstance 1.3.6.1.4.1.3085.3.1.4.2.9.3.1.1.1
The unique identifier of the Integrated IS-IS instance to which this row corresponds.
OBJECT-TYPE    
  Integer32  

csIsisISAdjCircIndex 1.3.6.1.4.1.3085.3.1.4.2.9.3.1.1.2
The Circuit Index of the Circuit which is the parent of the IS adjacency.
OBJECT-TYPE    
  Integer32  

csIsisISAdjIndex 1.3.6.1.4.1.3085.3.1.4.2.9.3.1.1.3
A unique value identifying the IS adjacency from all other such adjacencies on this circuit. This value is assigned by the system when the adjacency is created automatically.
OBJECT-TYPE    
  Integer32  

csIsisISAdjState 1.3.6.1.4.1.3085.3.1.4.2.9.3.1.1.4
The state of the adjacency
OBJECT-TYPE    
  INTEGER initializing(1), up(2), failed(3), down(4)  

csIsisISAdjNeighSNPAAddress 1.3.6.1.4.1.3085.3.1.4.2.9.3.1.1.5
The SNPA address of the neighboring system.
OBJECT-TYPE    
  SNPAAddress  

csIsisISAdjNeighSysType 1.3.6.1.4.1.3085.3.1.4.2.9.3.1.1.6
The type of the neighboring system.
OBJECT-TYPE    
  INTEGER unknown(1), intermediateSystem(3), l1IntermediateSystem(4), l2IntermediateSystem(5)  

csIsisISAdjNeighSysID 1.3.6.1.4.1.3085.3.1.4.2.9.3.1.1.7
The system ID and circuit ID of the neighboring Intermediate System set from the source ID field of the neighbor's IIH PDUs.
OBJECT-TYPE    
  OCTET STRING SIZE(0..12)  

csIsisISAdjUsage 1.3.6.1.4.1.3085.3.1.4.2.9.3.1.1.8
An adjacency of type level1 is used for level 1 traffic only. An adjacency of type level2 is used for level 2 traffic only. An adjacency of type level1and2 is used for both level 1 and level 2 traffic. There may be two adjacencies (of types level1 and level2) between the same pair of Intermediate Systems.
OBJECT-TYPE    
  INTEGER undefined(1), level1(2), level2(3), level1and2(4)  

csIsisISAdjHoldTimer 1.3.6.1.4.1.3085.3.1.4.2.9.3.1.1.9
The holding time for this adjacency updated from received IIH PDUs.
OBJECT-TYPE    
  Integer32 1..65535  

csIsisISAdjNeighPriority 1.3.6.1.4.1.3085.3.1.4.2.9.3.1.1.10
Priority of the neighboring Intermediate System for becoming the LAN Level 1 Designated Intermediate System if the value of csIsisISAdjNeighSysType is L1IntermediateSystem or LAN Level 2 Designated Intermediate System if the value of csIsisISAdjNeighSysType is L2IntermediateSystem.
OBJECT-TYPE    
  ISPriority  

csIsisISAdjUpTime 1.3.6.1.4.1.3085.3.1.4.2.9.3.1.1.11
The amount of time in seconds since this adjacency entered state 'up'. Note: This can be implemented as start time less the current time.
OBJECT-TYPE    
  Integer32  

csIsisISAdjAreaAddrTable 1.3.6.1.4.1.3085.3.1.4.2.9.3.2
This table contains the set of Area Addresses of neighboring Intermediate Systems as reported in received IIH PDUs.
OBJECT-TYPE    
  SEQUENCE OF  
    CsIsisISAdjAreaAddrEntry

csIsisISAdjAreaAddrEntry 1.3.6.1.4.1.3085.3.1.4.2.9.3.2.1
Each entry contains one Area Address reported by a neighboring Intermediate System in its IIH PDUs.
OBJECT-TYPE    
  CsIsisISAdjAreaAddrEntry  

csIsisISAdjAreaAddrSysInstance 1.3.6.1.4.1.3085.3.1.4.2.9.3.2.1.1
The unique identifier of the Integrated IS-IS instance to which this row corresponds.
OBJECT-TYPE    
  Integer32  

csIsisISAdjAreaAddrCircIndex 1.3.6.1.4.1.3085.3.1.4.2.9.3.2.1.2
The identifier of the Circuit which is the parent of the IS adjacency to which this Area Address entry corresponds.
OBJECT-TYPE    
  Integer32  

csIsisISAdjAreaAddrAdjIndex 1.3.6.1.4.1.3085.3.1.4.2.9.3.2.1.3
The identifier of the IS adjacency to which this entry belongs.
OBJECT-TYPE    
  Integer32  

csIsisISAdjAreaAddress 1.3.6.1.4.1.3085.3.1.4.2.9.3.2.1.4
One Area Address as reported in IIH PDUs received from the neighbor.
OBJECT-TYPE    
  OSINSAddress  

csIsisISAdjIPAddrTable 1.3.6.1.4.1.3085.3.1.4.2.9.3.3
This table contains the set of IP Addresses of neighboring Intermediate Systems as reported in received IIH PDUs.
OBJECT-TYPE    
  SEQUENCE OF  
    CsIsisISAdjIPAddrEntry

csIsisISAdjIPAddrEntry 1.3.6.1.4.1.3085.3.1.4.2.9.3.3.1
Each entry contains one IP Address reported by a neighboring Intermediate System in its IIH PDUs.
OBJECT-TYPE    
  CsIsisISAdjIPAddrEntry  

csIsisISAdjIPAddrSysInstance 1.3.6.1.4.1.3085.3.1.4.2.9.3.3.1.1
The unique identifier of the Integrated IS-IS instance to which this row corresponds.
OBJECT-TYPE    
  Integer32  

csIsisISAdjIPAddrCircIndex 1.3.6.1.4.1.3085.3.1.4.2.9.3.3.1.2
The identifier of the Circuit which is the parent of the IS adjacency to which this IP Address entry corresponds.
OBJECT-TYPE    
  Integer32  

csIsisISAdjIPAddrAdjIndex 1.3.6.1.4.1.3085.3.1.4.2.9.3.3.1.3
The identifier of the IS adjacency to which this entry belongs.
OBJECT-TYPE    
  Integer32  

csIsisISAdjIPAddress 1.3.6.1.4.1.3085.3.1.4.2.9.3.3.1.4
One IP Address as reported in IIH PDUs received from the neighbor.
OBJECT-TYPE    
  IpAddress  

csIsisISAdjProtSuppTable 1.3.6.1.4.1.3085.3.1.4.2.9.3.4
This table contains the set of protocols supported by neighboring Intermediate Systems as reported in received IIH PDUs.
OBJECT-TYPE    
  SEQUENCE OF  
    CsIsisISAdjProtSuppEntry

csIsisISAdjProtSuppEntry 1.3.6.1.4.1.3085.3.1.4.2.9.3.4.1
Each entry contains one protocol supported by a neighboring Intermediate System as reported in its IIH PDUs.
OBJECT-TYPE    
  CsIsisISAdjProtSuppEntry  

csIsisISAdjProtSuppSysInstance 1.3.6.1.4.1.3085.3.1.4.2.9.3.4.1.1
The unique identifier of the Integrated IS-IS instance to which this row corresponds.
OBJECT-TYPE    
  Integer32  

csIsisISAdjProtSuppCircIndex 1.3.6.1.4.1.3085.3.1.4.2.9.3.4.1.2
The identifier of the Circuit which is the parent of the IS adjacency to which this supported protocol entry corresponds.
OBJECT-TYPE    
  Integer32  

csIsisISAdjProtSuppAdjIndex 1.3.6.1.4.1.3085.3.1.4.2.9.3.4.1.3
The identifier the IS adjacency to which this entry corresponds.
OBJECT-TYPE    
  Integer32  

csIsisISAdjProtSuppProtocol 1.3.6.1.4.1.3085.3.1.4.2.9.3.4.1.4
One supported protocol as reported in IIH PDUs received from the neighbor.
OBJECT-TYPE    
  SupportedProtocol  

csIsisISAdjProtSuppTableEnd 1.3.6.1.4.1.3085.3.1.4.2.9.3.5
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csIsisReachAdddr 1.3.6.1.4.1.3085.3.1.4.2.9.4
OBJECT IDENTIFIER    

csIsisIPReachAddr 1.3.6.1.4.1.3085.3.1.4.2.9.5
OBJECT IDENTIFIER    

csIsisIPRATable 1.3.6.1.4.1.3085.3.1.4.2.9.5.1
The table of IP Reachable Addresses to networks, subnetworks or hosts either manually configured or learned from another protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    CsIsisIPRAEntry

csIsisIPRAEntry 1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1
Each entry defines an IP Reachable Address to a network, subnetwork or host.
OBJECT-TYPE    
  CsIsisIPRAEntry  

csIsisIPRASysInstance 1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.1
The identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index and manualOrAutomatic behaviours.
OBJECT-TYPE    
  Integer32  

csIsisIPRACircIndex 1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.2
The identifier of the Circuit over which this IP destination is reachable. This object follows the index and manualOrAutomatic behaviours.
OBJECT-TYPE    
  Integer32  

csIsisIPRAIndex 1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.3
The identifier for this csIsisIPRAEntry. This value must be unique amongst all IP Reachable Addresses on the same parent Circuit. This object follows the index and manualOrAutomatic behaviours.
OBJECT-TYPE    
  Integer32  

csIsisIPRAType 1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.4
The type of this IP Reachable Address. Those of type manual are created by the network manager. Those of type automatic are created through propagation of routing information from another routing protocol.
OBJECT-TYPE    
  INTEGER manual(1), automatic(2)  

csIsisIPRADest 1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.5
The destination of this IP Reachable Address. This is either a network address, subnetwork address or host address. This object follows the manualOrAutomatic behaviour.
OBJECT-TYPE    
  IpAddress  

csIsisIPRAMask 1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.6
The network mask for the IP Address in the csIsisIPRADest object. This object follows the manualOrAutomatic behaviour.
OBJECT-TYPE    
  IpAddress  

csIsisIPRAExistState 1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.7
The state of this IP Reachable Address. This object follows the ExistenceState and manualOrAutomatic behaviours.
OBJECT-TYPE    
  RowStatus  

csIsisIPRAOperState 1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.8
The operational state of the IP Reachable Address. This object follows the operationalState and manualOrAutomatic behaviours.
OBJECT-TYPE    
  OperState  

csIsisIPRADefMetric 1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.9
The default metric value for reaching the specified destination over this circuit. This object follows the manualOrAutomatic behaviour.
OBJECT-TYPE    
  DefaultMetric  

csIsisIPRADelMetric 1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.10
The delay metric value for reaching the specified destination over this circuit. The value zero is reserved to mean the metric is not supported. This object follows the manualOrAutomatic behaviour.
OBJECT-TYPE    
  OtherMetric  

csIsisIPRAExpMetric 1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.11
The expense metric value for reaching the specified destination over this circuit. The value zero is reserved to mean the metric is not supported. This object follows the manualOrAutomatic behaviour.
OBJECT-TYPE    
  OtherMetric  

csIsisIPRAErrMetric 1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.12
The error metric value for reaching the specified destination over this circuit. The value zero is reserved to mean the metric is not supported. This object follows the manualOrAutomatic behaviour.
OBJECT-TYPE    
  OtherMetric  

csIsisIPRADefMetricType 1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.13
Indicates whether the default metric is internal or external. This object follows the manualOrAutomatic behaviour.
OBJECT-TYPE    
  MetricType  

csIsisIPRADelMetricType 1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.14
Indicates whether the delay metric is internal or external. This object follows the manualOrAutomatic behaviour.
OBJECT-TYPE    
  MetricType  

csIsisIPRAExpMetricType 1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.15
Indicates whether the expense metric is internal or external. This object follows the manualOrAutomatic behaviour.
OBJECT-TYPE    
  MetricType  

csIsisIPRAErrMetricType 1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.16
Indicates whether the error metric is internal or external. This object follows the manualOrAutomatic behaviour.
OBJECT-TYPE    
  MetricType  

csIsisIPRASNPAAddress 1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.17
The SNPA Address to which a PDU may be forwarded in order to reach a destination which matches this IP Reachable Address. This object follows the manualOrAutomatic behaviour.
OBJECT-TYPE    
  SNPAAddress  

csOrionIsisEnd 1.3.6.1.4.1.3085.3.1.4.2.9.6
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionMpls 1.3.6.1.4.1.3085.3.1.4.2.10
OBJECT IDENTIFIER    

csTeRsvpObjects 1.3.6.1.4.1.3085.3.1.4.2.10.1
OBJECT IDENTIFIER    

csRsvpSessionTable 1.3.6.1.4.1.3085.3.1.4.2.10.1.1
This table has one row for each session being managed by LSR. It provides the statistics pertaining to the session.
OBJECT-TYPE    
  SEQUENCE OF  
    CsRsvpSessionEntry

csRsvpSessionEntry 1.3.6.1.4.1.3085.3.1.4.2.10.1.1.1
An entry in this table is created by LSR for every established session. This entry is indexed by Session destination IP address Tunnel Identifier and Extended Tunnel Identifier.
OBJECT-TYPE    
  CsRsvpSessionEntry  

csRsvpSessionTunnelEndpoint 1.3.6.1.4.1.3085.3.1.4.2.10.1.1.1.1
One of the indices for the row of the table. Specifies the IP address (IPv4 only supported) of the destination of the Session.
OBJECT-TYPE    
  IpAddress  

csRsvpSessionTunnelID 1.3.6.1.4.1.3085.3.1.4.2.10.1.1.1.2
One of the indices for the row of the table. Specifies the Tunnel identifier of the Session.
OBJECT-TYPE    
  INTEGER 0..65535  

csRsvpSessionExtendedTunnelID 1.3.6.1.4.1.3085.3.1.4.2.10.1.1.1.3
One of the indices for the row of the table. Specifies the Extended Tunnel identifier of the Session.
OBJECT-TYPE    
  Unsigned32  

csRsvpSessionUpPsbs 1.3.6.1.4.1.3085.3.1.4.2.10.1.1.1.4
This object specifies the number of upside senders (Up PSBs) for this session known to this processor of this LSR.
OBJECT-TYPE    
  Gauge32  

csRsvpSessionDownPsbs 1.3.6.1.4.1.3085.3.1.4.2.10.1.1.1.5
This object specifies the number of downside senders (Down PSBs) for this session known to this processor of this LSR.
OBJECT-TYPE    
  Gauge32  

csRsvpSessionUpRsbs 1.3.6.1.4.1.3085.3.1.4.2.10.1.1.1.6
This object specifies the number of upside receivers (Up RSBs) for this session known to this processor of this LSR.
OBJECT-TYPE    
  Gauge32  

csRsvpSessionDownRsbs 1.3.6.1.4.1.3085.3.1.4.2.10.1.1.1.7
This object specifies the number of downside receivers (Down RSBs) for this session known to this processor of this LSR.
OBJECT-TYPE    
  Gauge32  

csRsvpIfTable 1.3.6.1.4.1.3085.3.1.4.2.10.1.2
This table has one row each for every interface of this LSR running TE-RSVP. Corresponding row in csRsvpNbrTable must be configured before a row in this table can be activated.
OBJECT-TYPE    
  SEQUENCE OF  
    CsRsvpIfEntry

csRsvpIfEntry 1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1
An entry in this table is created for every interface running TE-RSVP.
OBJECT-TYPE    
  CsRsvpIfEntry  

csRsvpIfMaxBandwidth 1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.1
RSVP Reservable Bandwidth (KBPS)
OBJECT-TYPE    
  Integer32  

csRsvpIfMaxFlowBandwidth 1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.2
Largest Reservable Flow (KBPS)
OBJECT-TYPE    
  Integer32  

csRsvpIfUdpNbrs 1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.3
The number of neighbors perceived to be using only the RSVP UDP Encapsulation.
OBJECT-TYPE    
  Gauge32  

csRsvpIfIpNbrs 1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.4
The number of neighbors perceived to be using only the RSVP IP Encapsulation.
OBJECT-TYPE    
  Gauge32  

csRsvpIfNbrs 1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.5
The number of neighbors currently perceived; this will exceed rsvpIfIpNbrs + rsvpIfUdpNbrs by the number of neighbors using both encapsulations.
OBJECT-TYPE    
  Gauge32  

csRsvpIfEnabled 1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.6
If TRUE, RSVP is enabled on this Interface. If FALSE, RSVP is not enabled on this interface.
OBJECT-TYPE    
  TruthValue  

csRsvpIfUdpRequired 1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.7
If TRUE, manual configuration forces the use of UDP encapsulation on the interface. If FALSE, UDP encapsulation is only used if rsvpIfUdpNbrs is not zero.
OBJECT-TYPE    
  TruthValue  

csRsvpIfRefreshBlockadeMultiple 1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.8
The value of the RSVP value 'Kb', Which is the minimum number of refresh intervals that blockade state will last once entered.
OBJECT-TYPE    
  INTEGER 1..65535  

csRsvpIfRefreshMultiple 1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.9
The value of the RSVP value 'K', which is the number of refresh intervals which must elapse (minimum) before a PATH or RESV message which is not being refreshed will be aged out.
OBJECT-TYPE    
  INTEGER 1..65535  

csRsvpIfTTL 1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.10
The value of SEND_TTL used on this interface for messages this node originates. If set to zero, the node determines the TTL via other means.
OBJECT-TYPE    
  INTEGER 0..255  

csRsvpIfRefreshInterval 1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.11
The value of the RSVP value 'R', which is the minimum period between refresh transmissions of a given PATH or RESV message on an interface.
OBJECT-TYPE    
  TimeInterval  

csRsvpIfRouteDelay 1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.12
The approximate period from the time a route is changed to the time a resulting message appears on the interface.
OBJECT-TYPE    
  TimeInterval  

csRsvpIfStatus 1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.13
'active' on interfaces that are configured for RSVP. Corresponding row in csRsvpNbrTable must be configured and activated before the row in this table can be activated.
OBJECT-TYPE    
  RowStatus  

csRsvpIfPktsIn 1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.14
Number of RSVP Packets received in this interface.
OBJECT-TYPE    
  Counter32  

csRsvpIfPathIn 1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.15
Number of PATH messages received on this interface.
OBJECT-TYPE    
  Counter32  

csRsvpIfResvIn 1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.16
Number of RESV messages received on this interface.
OBJECT-TYPE    
  Counter32  

csRsvpIfPathTearIn 1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.17
Number of Path Tear messages received on this interface.
OBJECT-TYPE    
  Counter32  

csRsvpIfPathErrIn 1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.18
Number of Path Error messages received on this interface.
OBJECT-TYPE    
  Counter32  

csRsvpIfResvTearIn 1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.19
Number of Resv Tear messages received on this interface.
OBJECT-TYPE    
  Counter32  

csRsvpIfResvErrIn 1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.20
Number of RESV Error messages received on this interface.
OBJECT-TYPE    
  Counter32  

csRsvpIfResvConfIn 1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.21
Number of RESV COnfirmation messages received on this interface.
OBJECT-TYPE    
  Counter32  

csRsvpIfPathOut 1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.22
Number of Path messages sent out over this interface.
OBJECT-TYPE    
  Counter32  

csRsvpIfResvOut 1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.23
Number of Resv messages sent out over this interface.
OBJECT-TYPE    
  Counter32  

csRsvpIfPathTearOut 1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.24
Number of Path Tear messages sent out over this interface.
OBJECT-TYPE    
  Counter32  

csRsvpIfPathErrOut 1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.25
Number of Path Error messages sent out over this interface.
OBJECT-TYPE    
  Counter32  

csRsvpIfResvTearOut 1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.26
Number of Resv Tear messages sent out over this interface.
OBJECT-TYPE    
  Counter32  

csRsvpIfResvErrOut 1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.27
Number of Resv Error messages sent out over this interface.
OBJECT-TYPE    
  Counter32  

csRsvpIfResvConfOut 1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.28
Number of Resv Confirm messages sent out over this interface.
OBJECT-TYPE    
  Counter32  

csRsvpIfBadPathIn 1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.29
Number of bad Path messages received over this interface.
OBJECT-TYPE    
  Counter32  

csRsvpIfBadResvIn 1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.30
Number of bad Resv messages received over this interface.
OBJECT-TYPE    
  Counter32  

csRsvpIfBadPathTearIn 1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.31
Number of bad Path Tear messages received over this interface.
OBJECT-TYPE    
  Counter32  

csRsvpIfBadPathErrIn 1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.32
Number of bad Path Error messages received over this interface.
OBJECT-TYPE    
  Counter32  

csRsvpIfBadResvTearIn 1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.33
Number of bad Resv Tear messages received over this interface.
OBJECT-TYPE    
  Counter32  

csRsvpIfBadResvErrIn 1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.34
Number of bad Resv Error messages received over this interface.
OBJECT-TYPE    
  Counter32  

csRsvpIfBadResvConfIn 1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.35
Number of bad Resv Confirm messages received over this interface.
OBJECT-TYPE    
  Counter32  

csRsvpIfBadOtherIn 1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.36
Number of messages received over this interface which were not valid RSVP messages.
OBJECT-TYPE    
  Counter32  

csRsvpIfUpPsbsCreated 1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.37
Number of Upside PSBs created so far on this interface.
OBJECT-TYPE    
  Counter32  

csRsvpIfDownPsbsCreated 1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.38
Number of Downside PSBs created so far on this interface.
OBJECT-TYPE    
  Counter32  

csRsvpIfUpRsbsCreated 1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.39
Number of Upside RSBs created so far on this interface.
OBJECT-TYPE    
  Counter32  

csRsvpIfDownRsbsCreated 1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.40
Number of Downside RSBs created so far on this interface.
OBJECT-TYPE    
  Counter32  

csRsvpIfIngressLspsCreated 1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.41
Number of LSPs created on this node which were originated from this interface of this node.
OBJECT-TYPE    
  Counter32  

csRsvpIfEgressLspsCreated 1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.42
Number of LSPs created on this node which were terminated on this interface of this node.
OBJECT-TYPE    
  Counter32  

csRsvpIfIpAddress 1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.43
The IP Address of this RSVP interface.
OBJECT-TYPE    
  IpAddress  

csRsvpIfRRCapable 1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.44
Indicates the administrator's intent to switch on/off RSVP aggregation on the interface. Aggregation includes RSVP Refresh Reduction related messages.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

csRsvpIfAckDesired 1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.45
Indicates the administrator's intent as to whether acknowledgement is desired for the aggregation messages on this interface. If the administrator switches this variable on, then RSVP aggregation (csRsvpIfRRCapable) is switched ON automatically.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

csRsvpIfHelloInterval 1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.46
Configures the interval in seconds between Rsvp Hello messages exchanged between neighbors, on this interface.
OBJECT-TYPE    
  Integer32 0..60  

csRsvpVrConfTable 1.3.6.1.4.1.3085.3.1.4.2.10.1.3
This table is used to provide RSVP related functionality at the router level
OBJECT-TYPE    
  SEQUENCE OF  
    CsRsvpVrConfEntry

csRsvpVrConfEntry 1.3.6.1.4.1.3085.3.1.4.2.10.1.3.1
This entry is indexed by the VPN and VR ID
OBJECT-TYPE    
  CsRsvpVrConfEntry  

csRsvpVrAdminStatus 1.3.6.1.4.1.3085.3.1.4.2.10.1.3.1.1
Indicates the administrator's intent as to whether RSVP should be enabled or disabled on this router.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

csRsvpVrEventLogLevel 1.3.6.1.4.1.3085.3.1.4.2.10.1.3.1.2
This object is used to set the level of details for event logs for RSVP
OBJECT-TYPE    
  Integer32  

csRsvpVrEventLogArea 1.3.6.1.4.1.3085.3.1.4.2.10.1.3.1.3
This object is used to set the area of event logs for RSVP
OBJECT-TYPE    
  Integer32  

csRsvpVrConfOpCode 1.3.6.1.4.1.3085.3.1.4.2.10.1.3.1.4
Used by Rsvp Trace Commands
OBJECT-TYPE    
  Integer32  

csRsvpVrConfRowStatus 1.3.6.1.4.1.3085.3.1.4.2.10.1.3.1.5
A row status type for the Rsvp Table
OBJECT-TYPE    
  RowStatus  

csRsvpVrConfTableEnd 1.3.6.1.4.1.3085.3.1.4.2.10.1.4
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csRsvpIfQueueTable 1.3.6.1.4.1.3085.3.1.4.2.10.1.5
This table is used to allocate MPLS bandwidth for different hardware queues on a physical VI.
OBJECT-TYPE    
  SEQUENCE OF  
    CsRsvpIfQueueEntry

csRsvpIfQueueEntry 1.3.6.1.4.1.3085.3.1.4.2.10.1.5.1
An entry in this table is created for every hardware queue on a physical VI to reserve bandwidth for MPLS.
OBJECT-TYPE    
  CsRsvpIfQueueEntry  

csRsvpIfQueueID 1.3.6.1.4.1.3085.3.1.4.2.10.1.5.1.1
The possible queue on a physical VI
OBJECT-TYPE    
  INTEGER ef(1), af1(2), af2(3), af3(4), af4(5), be(6), none(7), ef-low(8), ef-high(9)  

csRsvpIfQueueBandwidth 1.3.6.1.4.1.3085.3.1.4.2.10.1.5.1.2
The maximum reservable bandwidth for MPLS.
OBJECT-TYPE    
  Integer32 -1..10000000  

csRsvpIfQueueRowStatus 1.3.6.1.4.1.3085.3.1.4.2.10.1.5.1.3
A row status type for this table
OBJECT-TYPE    
  RowStatus  

csRsvpIfQueueOperBandwidth 1.3.6.1.4.1.3085.3.1.4.2.10.1.5.1.4
Operational Bandwidth for the queue
OBJECT-TYPE    
  Integer32  

csRsvpIfQueueTableEnd 1.3.6.1.4.1.3085.3.1.4.2.10.1.6
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csTeMplsObjects 1.3.6.1.4.1.3085.3.1.4.2.10.2
OBJECT IDENTIFIER    

csMplsLspTable 1.3.6.1.4.1.3085.3.1.4.2.10.2.1
List of Configured Label Switched Paths.
OBJECT-TYPE    
  SEQUENCE OF  
    CsMplsLspEntry

csMplsLspEntry 1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1
Entry containing information about a particular Label Switched Path.
OBJECT-TYPE    
  CsMplsLspEntry  

csMplsLspID 1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.1
This object identifies a Label Switched Path.
OBJECT-TYPE    
  Integer32 1..65535  

csMplsLspName 1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.2
Name of the Label Switched Path.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

csMplsLspState 1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.3
The operational state of the LSP.
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down(3)  

csMplsLspOctets 1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.4
The number of octets that have been forwarded over current LSP active path. The number reported is not realtime, may subject to several minutes delay. The delay is controllable by mpls statistics gathering interval, which by default is once every 5 minutes. If mpls statistics gathering is not enabled, this number will not increment.
OBJECT-TYPE    
  Counter32  

csMplsLspPackets 1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.5
The number of packets that have been forwarded over current LSP active path. The number reported is not realtime, may subject to several minutes delay. The delay is controllable by mpls statistics gathering interval, which by default is once every 5 minutes. If mpls statistics gathering is not enabled, this number will not increment.
OBJECT-TYPE    
  Counter32  

csMplsLspAge 1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.6
The age (i.e., time from creation till now) of this LSP in 10-millisecond periods.
OBJECT-TYPE    
  TimeStamp  

csMplsLspTimeUp 1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.7
The total time in 10-millisecond units that this LSP has been operational. For example, the percentage up time can be determined by computing (mplsLspTimeUp/mplsLspAge * 100 %).
OBJECT-TYPE    
  TimeStamp  

csMplsLspPrimaryTimeUp 1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.8
The total time in 10-millisecond units that this LSP's primary path has been operational. For example, the percentage contribution of the primary path to the operational time is given by (mplsLspPrimaryTimeUp/mplsLspTimeUp * 100) %.
OBJECT-TYPE    
  TimeStamp  

csMplsLspTransitions 1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.9
The number of state transitions (up -> down and down -> up) this LSP has undergone.
OBJECT-TYPE    
  Counter32  

csMplsLspLastTransition 1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.10
The time in 10-millisecond units since the last transition occurred on this LSP.
OBJECT-TYPE    
  TimeStamp  

csMplsLspPathChanges 1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.11
The number of path changes this LSP has had. For every path change (path down, path up, path change), a corresponding syslog/trap (if enabled) is generated for it.
OBJECT-TYPE    
  Counter32  

csMplsLspLastPathChange 1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.12
The time in 10-millisecond units since the last change occurred on this LSP.
OBJECT-TYPE    
  TimeStamp  

csMplsLspConfiguredPaths 1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.13
The number of paths configured for this LSP.
OBJECT-TYPE    
  Integer32  

csMplsLspStandbyPaths 1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.14
The number of standby paths configured for this LSP.
OBJECT-TYPE    
  Integer32  

csMplsLspOperationalPaths 1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.15
The number of operational paths for this LSP. This includes the path currently active, as well as operational standby paths.
OBJECT-TYPE    
  Integer32  

csMplsLspFrom 1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.16
Source IP address of this LSP.
OBJECT-TYPE    
  IpAddress  

csMplsLspTo 1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.17
Destination IP address of this LSP.
OBJECT-TYPE    
  IpAddress  

csMplsPathName 1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.18
The name of the active path for this LSP, if any. If there is none, the name should be empty.
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

csMplsPathType 1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.19
The type of path that is active, i.e., a primary path, a standby path, or a generic secondary path. This field is meaningless if csMplsPathName or csMplsPathIdentifier is not supplied
OBJECT-TYPE    
  INTEGER other(1), primary(2), standby(3), secondary(4)  

csMplsPathBandwidth 1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.20
The configured bandwidth for this LSP, in units of thousands of bits per second (Kbps).
OBJECT-TYPE    
  Integer32  

csMplsPathCOS 1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.21
The configured Class Of Service on this path. If the value is between 0 and 7 inclusive, this value will be inserted in the 3 bit COS field in the label. If the value is 255, the value in the COS field of the label will depend on other factors. This field is meaningless if csMplsPathName or csMplsPathIdentifier is not supplied
OBJECT-TYPE    
  INTEGER 0..7 | 255  

csMplsPathInclude 1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.22
This is a configured set of colors (administrative groups) specified as a bit vector (i.e., bit n is 1 if color n is in the set, where n = 0 is the LSB). For each link that this path goes through, the link MUST have colors associated with it, and the intersection of the link's colors and the 'include' set MUST be non-null. This field is meaningless if csMplsPathName or csMplsPathIdentifier is not supplied
OBJECT-TYPE    
  Integer32  

csMplsPathExclude 1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.23
This is a configured set of colors (administrative groups) specified as a bit vector (i.e., bit n is 1 if color n is in the set, where n = 0 is the LSB). For each link that this path goes through, the link MUST have colors associated with it, and the intersection of the link's colors and the 'exclude' set MUST be null.This field is meaningless if csMplsPathName or csMplsPathIdentifier is not supplied
OBJECT-TYPE    
  Integer32  

csMplsPathSetupPriority 1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.24
The setup priority configured for this path.
OBJECT-TYPE    
  INTEGER 0..7  

csMplsPathHoldPriority 1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.25
The hold priority configured for this path.
OBJECT-TYPE    
  INTEGER 0..7  

csMplsPathRecordRoute 1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.26
This is used to set record route
OBJECT-TYPE    
  INTEGER off(0), on(1)  

csMplsPathDynamic 1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.27
This is used to configure a dynamic path
OBJECT-TYPE    
  INTEGER off(0), on(1)  

csMplsPathIdentifier 1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.28
Path-option explicit-path identifier
OBJECT-TYPE    
  Integer32 0..65535  

csMplsPathBgpAutoRouteAnnounce 1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.29
Used to specify that the IGP should use the tunnel (if the tunnel is up) in its enhanced shortest path first (SPF) calculation.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

csMplsPathMetricMode 1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.30
Used to specify the MPLS traffic engineering tunnel metric type that the IGP enhanced SPF calculation uses. MetricMode can be absolute or relative
OBJECT-TYPE    
  INTEGER other(0), absolute(1), relative(2)  

csMplsPathMetricValue 1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.31
Absolute metric mode the user can enter a positive value and for relative metric mode the user can enter a positive negative or zero value
OBJECT-TYPE    
  Integer32  

csMplsPathAffinity 1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.32
Used to configure an affinity for an MPLS traffic engineering tunnel
OBJECT-TYPE    
  Integer32  

csMplsPathAffinityMask 1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.33
Used to configure affinity mask value for an MPLS traffic engineering tunnel
OBJECT-TYPE    
  Integer32  

csMplsLspPreference 1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.34
Used to set the Lsp Preference Value
OBJECT-TYPE    
  Integer32 1..65535  

csMplsLspRowStatus 1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.35
A row status type for the Lsp Table
OBJECT-TYPE    
  RowStatus  

csMplsPathIsisAutoRouteAnnounce 1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.36
Used to specify that the IGP should use the tunnel (if the tunnel is up) in its enhanced shortest path first (SPF) calculation.Used by Isis.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

csMplsPathOspfAutoRouteAnnounce 1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.37
Used to specify that the IGP should use the tunnel (if the tunnel is up) in its enhanced shortest path first (SPF) calculation. Used by Ospf.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

csMplsVrPathRecordRoute 1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.38
This entry records the path recorded by Rsvp for the tunnel. This field is a displayable string in the format of XXX.XXX.XXX.XXX repeated for each explicit address.
OBJECT-TYPE    
  OCTET STRING SIZE(0..1024)  

csMplsLspOperationStatus 1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.39
This object contains the operational status for the LSP
OBJECT-TYPE    
  INTEGER operationallyDown(1), initializing(2), operationallyUp(3), faultRecovery(4), testing(5), unknown(6)  

csMplsPathExpValue 1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.40
Exp Value to use for this path
OBJECT-TYPE    
  INTEGER -1..7  

csMplsPathCosValue 1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.41
Cos Value for this path
OBJECT-TYPE    
  INTEGER ef(1), af1(2), af2(3), af3(4), af4(5), be(6), none(7), ef-low(8), ef-high(9)  

csMplsPathDropPrecedence 1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.42
Drop precedence for this path
OBJECT-TYPE    
  INTEGER red(1), yellow(2), green(3), none(4)  

csMplsPathHotStandby 1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.43
Mark this path as Hot Standby
OBJECT-TYPE    
  INTEGER off(1), on(2)  

csMplsPathVpnAutoRouteAnnounce 1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.44
Used to specify that the IGP should use the tunnel (if the tunnel is up) in its enhanced shortest path first (SPF) calculation
OBJECT-TYPE    
  INTEGER off(0), on(1)  

csMplsPathPwe3AutoRouteAnnounce 1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.45
Used to specify that the IGP should use the tunnel (if the tunnel is up) in its enhanced shortest path first (SPF) calculation
OBJECT-TYPE    
  INTEGER off(0), on(1)  

csMplsInterfaceConfTable 1.3.6.1.4.1.3085.3.1.4.2.10.2.2
This table has one entry for every interface running Mpls
OBJECT-TYPE    
  SEQUENCE OF  
    CsMplsInterfaceConfEntry

csMplsInterfaceConfEntry 1.3.6.1.4.1.3085.3.1.4.2.10.2.2.1
An entry in this table is created for interface specific Label space configuration information.
OBJECT-TYPE    
  CsMplsInterfaceConfEntry  

csMplsInterfaceUseInterfaceLabels 1.3.6.1.4.1.3085.3.1.4.2.10.2.2.1.1
If TRUE indicates that this interface is configured to use interface specific label space. If FALSE then this interface is configured to use Platform specific label space.
OBJECT-TYPE    
  TruthValue  

csMplsInterfaceLabelRange 1.3.6.1.4.1.3085.3.1.4.2.10.2.2.1.2
This object specifies the type of Labels that are being use for interface specific label space configuration information. Value of this object is significant only if csMplsInterfaceUseInterfaceLabels is set to TRUE. (If csMplsInterfaceUseInterfaceLabels is FALSE then this interface is configured to use Platform specific label space.)
OBJECT-TYPE    
  INTEGER generic(0), atm-range(1), fr-range-dlci10(2), fr-range-dlci17(3), fr-range-dlci23(4)  

csMplsInterfaceLabelMinIn 1.3.6.1.4.1.3085.3.1.4.2.10.2.2.1.3
This object specifies the lower limit of the label range to be used in incoming packets over this interface. This object specifies configuration information for interface specific label space and is significant only if value of csMplsInterfaceUseInterfaceLabels is set to TRUE.
OBJECT-TYPE    
  MplsLabel  

csMplsInterfaceLabelMaxIn 1.3.6.1.4.1.3085.3.1.4.2.10.2.2.1.4
This object specifies the upper limit of the label range to be used in incoming packets over this interface. This object specifies configuration information for interface specific label space and is significant only if value of csMplsInterfaceUseInterfaceLabels is set to TRUE.
OBJECT-TYPE    
  MplsLabel  

csMplsInterfaceLabelMinOut 1.3.6.1.4.1.3085.3.1.4.2.10.2.2.1.5
This object specifies the lower limit of the label range to be used in outgoing packets over this interface. This object specifies configuration information for interface specific label space and is significant only if value of csMplsInterfaceUseInterfaceLabels is set to TRUE.
OBJECT-TYPE    
  MplsLabel  

csMplsInterfaceLabelMaxOut 1.3.6.1.4.1.3085.3.1.4.2.10.2.2.1.6
This object specifies the upper limit of the label range to be used in outgoing packets over this interface. This object specifies configuration information for interface specific label space and is significant only if value of csMplsInterfaceUseInterfaceLabels is set to TRUE.
OBJECT-TYPE    
  MplsLabel  

csMplsInterfaceAdminStatus 1.3.6.1.4.1.3085.3.1.4.2.10.2.2.1.7
Indicates the administrator's intent as to whether MPLS should be enabled or disabled on this interface.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

csMplsInterfaceOperStatus 1.3.6.1.4.1.3085.3.1.4.2.10.2.2.1.8
This object specifies the operational state of MPLS on this interface.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

csMplsInterfaceAdminWeight 1.3.6.1.4.1.3085.3.1.4.2.10.2.2.1.9
Used to override the Interior Gateway Protocol (IGP) administrative weight (cost) of the link
OBJECT-TYPE    
  Integer32  

csMplsInterfaceAttribFlags 1.3.6.1.4.1.3085.3.1.4.2.10.2.2.1.10
Used to set the user-specified attribute flags for the interface
OBJECT-TYPE    
  Integer32  

csMplsInterfaceRowStatus 1.3.6.1.4.1.3085.3.1.4.2.10.2.2.1.11
A row status type for the MplsInterface table
OBJECT-TYPE    
  RowStatus  

csMplsVrConfTable 1.3.6.1.4.1.3085.3.1.4.2.10.2.3
This table is used to Configure Mpls on a Virtual Router.
OBJECT-TYPE    
  SEQUENCE OF  
    CsMplsVrConfEntry

csMplsVrConfEntry 1.3.6.1.4.1.3085.3.1.4.2.10.2.3.1
This entry is indexed by the VPN and VR ID
OBJECT-TYPE    
  CsMplsVrConfEntry  

csMplsVrAdminStatus 1.3.6.1.4.1.3085.3.1.4.2.10.2.3.1.1
Indicates the administrator's intent as to whether MPLS should be enabled or disabled on this router.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

csMplsVrEventLogLevel 1.3.6.1.4.1.3085.3.1.4.2.10.2.3.1.2
This object is used to set the level of details for event logs for MPLS
OBJECT-TYPE    
  Integer32  

csMplsVrEventLogArea 1.3.6.1.4.1.3085.3.1.4.2.10.2.3.1.3
This object is used to set the area of event logs for MPLS
OBJECT-TYPE    
  Integer32  

csMplsVrConfOpCode 1.3.6.1.4.1.3085.3.1.4.2.10.2.3.1.4
Used for Mpls Trace Commands only
OBJECT-TYPE    
  Integer32  

csMplsVrConfRowStatus 1.3.6.1.4.1.3085.3.1.4.2.10.2.3.1.5
The existence state of this table. This object follows the Row Status behaviour
OBJECT-TYPE    
  RowStatus  

csMplsExtensionsTable 1.3.6.1.4.1.3085.3.1.4.2.10.2.4
This table is used to support Mpls Extensions
OBJECT-TYPE    
  SEQUENCE OF  
    CsMplsExtensionsEntry

csMplsExtensionsEntry 1.3.6.1.4.1.3085.3.1.4.2.10.2.4.1
This entry is indexed by the VPN and VrID
OBJECT-TYPE    
  CsMplsExtensionsEntry  

csMplsMetricStyle 1.3.6.1.4.1.3085.3.1.4.2.10.2.4.1.1
This entry is used to define the metric-style. wide => csMplsMetricStyle = 1, narrow => csMplsMetricStyle = 2, transition => csMplsMetricStyle = 3
OBJECT-TYPE    
  INTEGER wide(1), narrow(2), transition(3)  

csMplsExtensionsRowStatus 1.3.6.1.4.1.3085.3.1.4.2.10.2.4.1.2
The existence state of this table. This object follows the Row Status behaviour.
OBJECT-TYPE    
  RowStatus  

csMplsOspfOpaqueAdminStatus 1.3.6.1.4.1.3085.3.1.4.2.10.2.4.1.3
This entry is used to indicate if Ospf Opaque is enabled or disabled on a router.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

csMplsVrPathConfTable 1.3.6.1.4.1.3085.3.1.4.2.10.2.5
This table is used to configure Explicitly Routed Path
OBJECT-TYPE    
  SEQUENCE OF  
    CsMplsVrPathConfEntry

csMplsVrPathConfEntry 1.3.6.1.4.1.3085.3.1.4.2.10.2.5.1
This entry is indexed by the VPN and VR ID
OBJECT-TYPE    
  CsMplsVrPathConfEntry  

csMplsVrPathName 1.3.6.1.4.1.3085.3.1.4.2.10.2.5.1.1
Explicit-path Name
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

csMplsVrPathExplicitRoute 1.3.6.1.4.1.3085.3.1.4.2.10.2.5.1.2
The explicit route used to set up this LSP. This may either be the route configured by the user, or a route automatically computed to satisfy constraints set by the user. This field is a displayable string in the format of XXX.XXX.XXX.XXX S/L repeated for each explicit address. The S/L character stands for Strict/Loose route. This field is meaningless if csMplsVrPathIdentifier or csMplsVrPathName is not supplied
OBJECT-TYPE    
  OCTET STRING SIZE(0..1024)  

csMplsVrPathIdentifier 1.3.6.1.4.1.3085.3.1.4.2.10.2.5.1.3
Explicit-path Identifier
OBJECT-TYPE    
  Integer32 1..65535  

csMplsVrPathConfRowStatus 1.3.6.1.4.1.3085.3.1.4.2.10.2.5.1.4
The existence state of this table. This object follows the Row Status behaviour
OBJECT-TYPE    
  RowStatus  

csMplsIsisExtensionsTable 1.3.6.1.4.1.3085.3.1.4.2.10.2.6
This table is used to support ISIS extensions to MPLS
OBJECT-TYPE    
  SEQUENCE OF  
    CsMplsIsisExtensionsEntry

csMplsIsisExtensionsEntry 1.3.6.1.4.1.3085.3.1.4.2.10.2.6.1
This entry is indexed by the VPN and VrID
OBJECT-TYPE    
  CsMplsIsisExtensionsEntry  

csMplsTrafficEnggLevel 1.3.6.1.4.1.3085.3.1.4.2.10.2.6.1.1
This entry is used to define the level on which MPLS traffic-eng will be used. Level-1 only => csMplsExtLevel = 1, Level-2 only => csMplsExtLevel = 2
OBJECT-TYPE    
  INTEGER level-1(1), level-2(2)  

csMplsTrafficEnggAdminStatus 1.3.6.1.4.1.3085.3.1.4.2.10.2.6.1.2
This entry is used to indicate if mpls traffic-eng is enabled or disabled on a level. This entry is used in conjunction with csMplsTrafficEnggLevel.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

csMplsIsisExtensionsRowStatus 1.3.6.1.4.1.3085.3.1.4.2.10.2.6.1.3
The existence state of this table. This object follows the Row Status behaviour.
OBJECT-TYPE    
  RowStatus  

csMplsOspfExtensionsTable 1.3.6.1.4.1.3085.3.1.4.2.10.2.7
This table is used to support Ospf Extensions for Mpls
OBJECT-TYPE    
  SEQUENCE OF  
    CsMplsOspfExtensionsEntry

csMplsOspfExtensionsEntry 1.3.6.1.4.1.3085.3.1.4.2.10.2.7.1
This entry is indexed by the VPN and VrID
OBJECT-TYPE    
  CsMplsOspfExtensionsEntry  

csMplsOspfAreaId 1.3.6.1.4.1.3085.3.1.4.2.10.2.7.1.1
A router running MPLS is configured to flood traffic-engineering for OSPF area csMplsOspfAreaId
OBJECT-TYPE    
  AreaID  

csMplsOspfAreaAdminStatus 1.3.6.1.4.1.3085.3.1.4.2.10.2.7.1.2
This entry is used to indicate if mpls is enabled or disabled on area. This entry is used in conjunction with csMplsOspfAreaId.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

csMplsOspfExtensionsRowStatus 1.3.6.1.4.1.3085.3.1.4.2.10.2.7.1.3
The existence state of this table. This object follows the Row Status behaviour.
OBJECT-TYPE    
  RowStatus  

csMplsOspfExtensionsTableEnd 1.3.6.1.4.1.3085.3.1.4.2.10.2.8
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csTeLdpObjects 1.3.6.1.4.1.3085.3.1.4.2.10.3
OBJECT IDENTIFIER    

csLdpVrConfTable 1.3.6.1.4.1.3085.3.1.4.2.10.3.1
This table is used to provide LDP related functionality at the router level
OBJECT-TYPE    
  SEQUENCE OF  
    CsLdpVrConfEntry

csLdpVrConfEntry 1.3.6.1.4.1.3085.3.1.4.2.10.3.1.1
This entry is indexed by the VPN and VR ID
OBJECT-TYPE    
  CsLdpVrConfEntry  

csLdpVrConfRowStatus 1.3.6.1.4.1.3085.3.1.4.2.10.3.1.1.1
The existence state of this table. This object follows the Row Status behaviour
OBJECT-TYPE    
  RowStatus  

csLdpVrAdminStatus 1.3.6.1.4.1.3085.3.1.4.2.10.3.1.1.2
Indicates the administrator's intent as to whether LDP should be enabled or disabled on this router.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

csLdpVrEventLogLevel 1.3.6.1.4.1.3085.3.1.4.2.10.3.1.1.3
This specifies the level of detail for the event log.
OBJECT-TYPE    
  INTEGER none(0), critical(1), debug(2), inform(3), major(4), minor(5)  

csLdpVrEventLogArea 1.3.6.1.4.1.3085.3.1.4.2.10.3.1.1.4
Each bit within this object enables loggin for a specific area within LDP. Below is a list of the different areas available for logging within LDP and their corresponding bits identifiers. area bit ----------------------------------------------------- all 1 adjacency 2 packet-receive 3 packet-send 4 session 5 packet-verbose 6 lsp 7 end of description.
OBJECT-TYPE    
  Unsigned32  

csLdpVrEventLogAreaMask 1.3.6.1.4.1.3085.3.1.4.2.10.3.1.1.5
csLdpVrEventLogAreaMask is used to indicate which area bit is being set to on/off. Below is a list of the different areas available for logging within LDP and their corresponding bits identifiers. area bit ----------------------------------------------------- all 1 adjacency 2 packet-receive 3 packet-send 4 session 5 packet-verbose 6 lsp 7 end of description.
OBJECT-TYPE    
  Unsigned32  

csLdpVrRoutePreference 1.3.6.1.4.1.3085.3.1.4.2.10.3.1.1.6
Route preference Value for LDP routes
OBJECT-TYPE    
  Integer32 0..255  

csLdpVrAutorouteAnnounce 1.3.6.1.4.1.3085.3.1.4.2.10.3.1.1.7
Indicates the administrator's intent to let BGP use LDP LSP's present in MPLS RIB for the bgp-next-hop resolution
OBJECT-TYPE    
  INTEGER off(1), on(2)  

csLdpVrVpnAutorouteAnnounce 1.3.6.1.4.1.3085.3.1.4.2.10.3.1.1.8
Indicates the administrator's intent to let Vpn use LDP LSP's present in MPLS RIB for the vpn-next-hop resolution
OBJECT-TYPE    
  INTEGER off(1), on(2)  

csLdpVrPwe3AutorouteAnnounce 1.3.6.1.4.1.3085.3.1.4.2.10.3.1.1.9
Indicates the administrator's intent to let PWE3 use LDP LSP's present in MPLS RIB for the next-hop resolution
OBJECT-TYPE    
  INTEGER off(1), on(2)  

csLdpVrAcceptTargetedHellos 1.3.6.1.4.1.3085.3.1.4.2.10.3.1.1.10
Indicates the targeted hellos are accepeted or rejected
OBJECT-TYPE    
  INTEGER reject(0), accept(1)  

csLdpVrConfTableEnd 1.3.6.1.4.1.3085.3.1.4.2.10.3.2
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csLdpEntityTable 1.3.6.1.4.1.3085.3.1.4.2.10.3.3
This table contains information about the MPLS Label Distribution Protocol Entities which exist on this Label Switch Router (LSR).
OBJECT-TYPE    
  SEQUENCE OF  
    CsLdpEntityEntry

csLdpEntityEntry 1.3.6.1.4.1.3085.3.1.4.2.10.3.3.1
An entry in this table represents an LDP entity. An entry can be created by a network administrator or by an SNMP agent as instructed by LDP.
OBJECT-TYPE    
  CsLdpEntityEntry  

csLdpEntityIndex 1.3.6.1.4.1.3085.3.1.4.2.10.3.3.1.1
This index is used as a secondary index to uniquely identify this row. Before creating a row in this table, the 'csLdpEntityIndexNext' object should be retrieved. That value should be used for the value of this index when creating a row in this table. (NOTE: if a value of zero (0) is retrieved, that indicates that no rows can be created in this table at this time. A secondary index (this object) is needed by some but not all, LDP implementations. For example in an LDP implementation which uses PPP, this index may be needed.
OBJECT-TYPE    
  Unsigned32 1..4294967295  

csLdpEntityRowStatus 1.3.6.1.4.1.3085.3.1.4.2.10.3.3.1.2
An object that allows entries in this table to be created and deleted using the RowStatus convention. Once the 'csLdpEntityAdminStatus' object has the value of 'up' and this object has the value of 'active' then the Entity will atttempt to contact an LDP Peer. If the value of this object is changed to 'notInService', then the Entity looses contact with the LDP Peer and all information related to that Peer must be removed from the MIB. This has the same effect as changing 'csLdpEntityAdminStatus' from 'enable' to 'disable'. When this object is set to 'active' and the value of the 'csLdpEntityAdminStatus' is 'enable' then this Entity will attempt to contact the Peer and establish new sessions.
OBJECT-TYPE    
  RowStatus  

csLdpEntityAdminStatus 1.3.6.1.4.1.3085.3.1.4.2.10.3.3.1.3
The administrative status of this LDP Entity. If this object is changed from 'enable' to 'disable' and this entity has already attempted to establish contact with a Peer (which implies that the 'csLdpEntityRowStatus' object has been set to 'active'), then all contact with that Peer is lost and all information from that Peer needs to be removed from the MIB. At this point the user is able to change values which are related to this entity. When the admin status is set back to 'up', then this Entity will attempt to establish new sessions with the Peer.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csLdpEntityHelloTimer 1.3.6.1.4.1.3085.3.1.4.2.10.3.3.1.4
Configures the interval in seconds between LDP hello's on this interface.
OBJECT-TYPE    
  Integer32 0..65535  

csLdpEntityHelloHoldTimer 1.3.6.1.4.1.3085.3.1.4.2.10.3.3.1.5
The two octet value which is the proposed Hello hold timer for this LDP Entity. A value of 0 means use the default, which is 15 seconds for Link Hellos and 45 seconds for Targeted Hellos. A value of 65535 means infinite.
OBJECT-TYPE    
  Integer32 0..65535  

csLdpEntityKeepAliveTimer 1.3.6.1.4.1.3085.3.1.4.2.10.3.3.1.6
Configures the interval in seconds between keepalive messages on this interface.
OBJECT-TYPE    
  Integer32 1..65535  

csLdpEntityKeepAliveHoldTimer 1.3.6.1.4.1.3085.3.1.4.2.10.3.3.1.7
The two octet value which is the proposed keep alive hold timer for this LDP Entity.
OBJECT-TYPE    
  Integer32 1..65535  

csLdpEntityTransportAddr 1.3.6.1.4.1.3085.3.1.4.2.10.3.3.1.8
This is used to store transport ip address for LDP Entity
OBJECT-TYPE    
  IpAddress  

csLdpTargetTable 1.3.6.1.4.1.3085.3.1.4.2.10.3.4
This table contains information about the MPLS Label Distribution Protocol Targeted Sessions which exist on this Label Switch Router (LSR).
OBJECT-TYPE    
  SEQUENCE OF  
    CsLdpTargetEntry

csLdpTargetEntry 1.3.6.1.4.1.3085.3.1.4.2.10.3.4.1
An entry in this table represents an LDP Targeted Session. An entry can be created by a network administrator or by an SNMP agent as instructed by LDP.
OBJECT-TYPE    
  CsLdpTargetEntry  

csLdpTargetPeerIpAddr 1.3.6.1.4.1.3085.3.1.4.2.10.3.4.1.1
This index is used as a secondary index to uniquely identify this row. Before creating a row in this table, the 'csLdpTargetIndexNext' object should be retrieved. That value should be used for the value of this index when creating a row in this table. (NOTE: if a value of zero (0) is retrieved, that indicates that no rows can be created in this table at this time. A secondary index (this object) is needed by some but not all, LDP implementations. For example in an LDP implementation which uses PPP, this index may be needed.
OBJECT-TYPE    
  IpAddress  

csLdpTargetRowStatus 1.3.6.1.4.1.3085.3.1.4.2.10.3.4.1.2
An object that allows entries in this table to be created and deleted using the RowStatus convention. Once the 'csLdpTargetAdminStatus' object has the value of 'up' and this object has the value of 'active' then the Session will atttempt to contact an LDP Peer. If the value of this object is changed to 'notInService', then the Session looses contact with the LDP Peer and all information related to that Peer must be removed from the MIB. This has the same effect as changing 'csLdpTargetAdminStatus' from 'enable' to 'disable'. When this object is set to 'active' and the value of the 'csLdpTargetAdminStatus' is 'enable' then this Session will attempt to contact the Peer and establish new sessions.
OBJECT-TYPE    
  RowStatus  

csLdpTargetAdminStatus 1.3.6.1.4.1.3085.3.1.4.2.10.3.4.1.3
The administrative status of this LDP Targeted Session. If this object is changed from 'enable' to 'disable' and this Session has already attempted to establish contact with a Peer (which implies that the 'csLdpTargetRowStatus' object has been set to 'active'), then all contact with that Peer is lost and all information from that Peer needs to be removed from the MIB. At this point the user is able to change values which are related to this entity. When the admin status is set back to 'up', then this Session will attempt to establish new sessions with the Peer.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csLdpTargetHelloTimer 1.3.6.1.4.1.3085.3.1.4.2.10.3.4.1.4
Configures the interval in seconds between LDP Targeted hello's on VR
OBJECT-TYPE    
  Integer32 0..65535  

csLdpTargetHelloHoldTimer 1.3.6.1.4.1.3085.3.1.4.2.10.3.4.1.5
The two octet value which is the proposed Hello hold timer for this LDP Targeted Session. A value of 0 means use the default, which is 15 seconds for Link Hellos and 45 seconds for Targeted Hellos. A value of 65535 means infinite.
OBJECT-TYPE    
  Integer32 0..65535  

csLdpTargetKeepAliveTimer 1.3.6.1.4.1.3085.3.1.4.2.10.3.4.1.6
Configures the interval in seconds between keepalive messages
OBJECT-TYPE    
  Integer32 1..65535  

csLdpTargetKeepAliveHoldTimer 1.3.6.1.4.1.3085.3.1.4.2.10.3.4.1.7
The two octet value which is the proposed keep alive hold timer for this LDP Targeted Session.
OBJECT-TYPE    
  Integer32 1..65535  

csLdpTargetActive 1.3.6.1.4.1.3085.3.1.4.2.10.3.4.1.8
If TRUE indicates that this is an active targeted entity i.e a targeted neighbor is explictly configured through CLI. The value set to true while creating an targeted entity
OBJECT-TYPE    
  TruthValue  

csOrionMplsEnd 1.3.6.1.4.1.3085.3.1.4.2.10.4
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionPPVpn 1.3.6.1.4.1.3085.3.1.4.2.11
OBJECT IDENTIFIER    

csOrionPPVpnObjects 1.3.6.1.4.1.3085.3.1.4.2.11.1
OBJECT IDENTIFIER    

csVpnVrfTable 1.3.6.1.4.1.3085.3.1.4.2.11.1.1
This table is used to configure RFC2547 VPN routing instances. Each instance represent the partication of this router as a VRF in an BGP/MPLS VPN provider edge (PE). A router can suppport multiple VPN routing instances to allow peering with with multiple VPN providers.
OBJECT-TYPE    
  SEQUENCE OF  
    CsVpnVrfEntry

csVpnVrfEntry 1.3.6.1.4.1.3085.3.1.4.2.11.1.1.1
Each entry contains information about a single RFC2547 BGP/MPLS VPN routing instance.
OBJECT-TYPE    
  CsVpnVrfEntry  

csVpnVrfName 1.3.6.1.4.1.3085.3.1.4.2.11.1.1.1.1
The name for this VPN instance. It can contain alphanumic characters and hiphens (-).
OBJECT-TYPE    
  DisplayString SIZE(1..32)  

csVpnVrfDescription 1.3.6.1.4.1.3085.3.1.4.2.11.1.1.1.2
The description for this instance.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

csVpnVrfProviderName 1.3.6.1.4.1.3085.3.1.4.2.11.1.1.1.3
The name of the VPN Service Provider VR for this instance. Multiple Service Provider names can be specified by separating them using spaces. The VRF instance will select to use one of these providers. If the selected provider connectivity not active then the VRF instance will select another provider from its list. A VRF peers with only one provider at any time.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

csVpnVrfRouteDistinguisher 1.3.6.1.4.1.3085.3.1.4.2.11.1.1.1.4
The route distinguisher for this VPN customer instance.
OBJECT-TYPE    
  OCTET STRING SIZE(0..8)  

csVpnVrfAdminStatus 1.3.6.1.4.1.3085.3.1.4.2.11.1.1.1.5
The enable/disable status of this VPN customer instance.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csVpnVrfLogAreaFlag 1.3.6.1.4.1.3085.3.1.4.2.11.1.1.1.6
Each bit within this object enables logging for a specific area within the VPN routing instance. Below is a list of the different areas available for logging: area bit ------------------------------------------------------ system 0 routes-receive 1 routes-send 2 vpn-sp (control interface to VPN-SP) 3 end of description.
OBJECT-TYPE    
  Unsigned32  

csVpnVrfLogLevelFlag 1.3.6.1.4.1.3085.3.1.4.2.11.1.1.1.7
This object enables logging at a specific level.
OBJECT-TYPE    
  INTEGER critical(1), error(2), warning(3), information(4), detail(5), debug(6)  

csVpnVrfPreference 1.3.6.1.4.1.3085.3.1.4.2.11.1.1.1.8
This default preference value for routes added by the instance to the RIB. A value of -1 indicates that this attribute is not configured.
OBJECT-TYPE    
  Integer32 1..255  

csVpnVrfRowStatus 1.3.6.1.4.1.3085.3.1.4.2.11.1.1.1.9
The variable is used to create, modify or delete a row in this table.
OBJECT-TYPE    
  RowStatus  

csVpnVrfSiteOfOrigin 1.3.6.1.4.1.3085.3.1.4.2.11.1.1.1.10
The site-f-origin extended community attribute for this VPN customer instance.
OBJECT-TYPE    
  OCTET STRING SIZE(0..8)  

csVpnVrfAllowASIn 1.3.6.1.4.1.3085.3.1.4.2.11.1.1.1.11
To allow duplicate AS numbers for the BGP VPN routes received by this VRF. This attribute specifies the number of duplicates which are permitted. By default duplocate ASNs are not permitted. This attribute is used only if the VR is configured with an ASN, i.e., BGP is enabled.
OBJECT-TYPE    
  Integer32 0..10  

csVpnVrfASOverride 1.3.6.1.4.1.3085.3.1.4.2.11.1.1.1.12
To allow the VPN service provider VR to override a VRF's ASN with the provders ASN. This option is normally used along with the site-of-origin option.
OBJECT-TYPE    
  TruthValue  

csVpnVrfMaxRoutes 1.3.6.1.4.1.3085.3.1.4.2.11.1.1.1.13
The maximum number of routes the VRF instance is allowed to add to the RIB. A value of -1 indicates that this attribute is not set, i.e., no maximum is configured.
OBJECT-TYPE    
  Integer32  

csVpnVrfMaxRoutesExceedAction 1.3.6.1.4.1.3085.3.1.4.2.11.1.1.1.14
The action to take if the number of routes exceed the csVpnVrfMaxRoutes configured for this VRF. discard: Routes are rejected with an error mesaage warning-message: Routes are accepted but a warning message is displayed.
OBJECT-TYPE    
  INTEGER discard(0), warning-message(1)  

csVpnVrfRouteTargetTable 1.3.6.1.4.1.3085.3.1.4.2.11.1.2
This table is used to configure import/export route targets for RFC2547 VPN routing instances (VRFs).
OBJECT-TYPE    
  SEQUENCE OF  
    CsVpnVrfRouteTargetEntry

csVpnVrfRouteTargetEntry 1.3.6.1.4.1.3085.3.1.4.2.11.1.2.1
Each entry contains information about a single route target. It is an 8-byte value. Also, each entry indicates if it is an import or export route target
OBJECT-TYPE    
  CsVpnVrfRouteTargetEntry  

csVpnVrfRouteTargetType 1.3.6.1.4.1.3085.3.1.4.2.11.1.2.1.1
The type of Route Target entry.
OBJECT-TYPE    
  INTEGER import(1), export(2)  

csVpnVrfRouteTargetValue 1.3.6.1.4.1.3085.3.1.4.2.11.1.2.1.2
The route target value. It is an extended community encoded as an 8-byte value. An extended community is specified either as <4-byte-ip-address>:<2-byte num> or as <2-byte AS-num>:<4-byte-num>.
OBJECT-TYPE    
  OCTET STRING SIZE(0..8)  

csVpnVrfRouteTargetRowStatus 1.3.6.1.4.1.3085.3.1.4.2.11.1.2.1.3
The variable is used to create, modify or delete a row in this table.
OBJECT-TYPE    
  RowStatus  

csOrionPbf 1.3.6.1.4.1.3085.3.1.4.2.12
OBJECT IDENTIFIER    

csOrionViPbfFilterTable 1.3.6.1.4.1.3085.3.1.4.2.12.1
This table specifies a set of acl's to be applied to packets received over an interface. The first entry whose ACL matches a packet causes the packet to be forwarded over the specified next-hop.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionViPbfFilterEntry

csOrionViPbfFilterEntry 1.3.6.1.4.1.3085.3.1.4.2.12.1.1
Each filter specifies whether packets matching a specific access list entry are forwarded to the specified next hop.
OBJECT-TYPE    
  CsOrionViPbfFilterEntry  

csOrionViPbfFilterIndex 1.3.6.1.4.1.3085.3.1.4.2.12.1.1.1
The Index of this particular PBF Filter.
OBJECT-TYPE    
  Integer32 1..65535  

csOrionViPbfFilterAclId 1.3.6.1.4.1.3085.3.1.4.2.12.1.1.2
The Id of an access list entry (from csOrionGenAclTable).
OBJECT-TYPE    
  Integer32 0..65535  

csOrionViPbfFilterEgressViId 1.3.6.1.4.1.3085.3.1.4.2.12.1.1.3
The index value to uniquely identify the local interface through which the next hop for matching flows should be reached. This field is valid for VIs connected to point-point links only. A value of 0 (zero) indicates the next-hop-vi is not specified.
OBJECT-TYPE    
  Integer32  

csOrionViPbfFilterNextHopIpAddr 1.3.6.1.4.1.3085.3.1.4.2.12.1.1.4
The IP address of the next hop of this route. A value of 0 (zero) indicates the next-hop-addr is not specified.
OBJECT-TYPE    
  IpAddress  

csOrionViPbfFilterAction 1.3.6.1.4.1.3085.3.1.4.2.12.1.1.5
The action performed by this filter.
OBJECT-TYPE    
  INTEGER permit(1), discard(2)  

csOrionViPbfFilterRowStatus 1.3.6.1.4.1.3085.3.1.4.2.12.1.1.6
A row status type for this Table entry.
OBJECT-TYPE    
  RowStatus  

csOrionViPbfFilterCounter 1.3.6.1.4.1.3085.3.1.4.2.12.1.1.7
Enable or disable counter on this filter.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOrionIgmp 1.3.6.1.4.1.3085.3.1.4.2.13
OBJECT IDENTIFIER    

csIgmpMIBObjects 1.3.6.1.4.1.3085.3.1.4.2.13.1
OBJECT IDENTIFIER    

csIgmpInterfaceTable 1.3.6.1.4.1.3085.3.1.4.2.13.1.1
The (conceptual) table listing the interfaces on which IGMP is enabled.
OBJECT-TYPE    
  SEQUENCE OF  
    CsIgmpInterfaceEntry

csIgmpInterfaceEntry 1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1
An entry (conceptual row) representing an interface on which IGMP is enabled.
OBJECT-TYPE    
  CsIgmpInterfaceEntry  

csIgmpInterfaceIfIndex 1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.1
The ifIndex value of the interface for which IGMP is enabled.
OBJECT-TYPE    
  InterfaceIndex  

csIgmpInterfaceQueryInterval 1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.2
The frequency at which IGMP Host-Query packets are transmitted on this interface.
OBJECT-TYPE    
  Unsigned32  

csIgmpInterfaceStatus 1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.3
The activation of a row enables IGMP on the interface. The destruction of a row disables IGMP on the interface.
OBJECT-TYPE    
  RowStatus  

csIgmpInterfaceVersion 1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.4
The version of IGMP which is running on this interface. This object can be used to configure a router capable of running either value. For IGMP to function correctly, all routers on a LAN must be configured to run the same version of IGMP on that LAN.
OBJECT-TYPE    
  Unsigned32  

csIgmpInterfaceQuerier 1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.5
The address of the IGMP Querier on the IP subnet to which this interface is attached.
OBJECT-TYPE    
  IpAddress  

csIgmpInterfaceQueryMaxResponseTime 1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.6
The maximum query response time advertised in IGMPv2 queries on this interface.
OBJECT-TYPE    
  Unsigned32 0..255  

csIgmpInterfaceQuerierUpTime 1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.7
The time since csIgmpInterfaceQuerier was last changed.
OBJECT-TYPE    
  TimeTicks  

csIgmpInterfaceQuerierExpiryTime 1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.8
The amount of time remaining before the Other Querier Present Timer expires. If the local system is the querier, the value of this object is zero.
OBJECT-TYPE    
  TimeTicks  

csIgmpInterfaceVersion1QuerierTimer 1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.9
The time remaining until the host assumes that there are no IGMPv1 routers present on the interface. While this is non- zero, the host will reply to all queries with version 1 membership reports.
OBJECT-TYPE    
  TimeTicks  

csIgmpInterfaceWrongVersionQueries 1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.10
The number of queries received whose IGMP version does not match csIgmpInterfaceVersion, over the lifetime of the row entry. IGMP requires that all routers on a LAN be configured to run the same version of IGMP. Thus, if any queries are received with the wrong version, this indicates a configuration error.
OBJECT-TYPE    
  Counter32  

csIgmpInterfaceJoins 1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.11
The number of times a group membership has been added on this interface; that is, the number of times an entry for this interface has been added to the Cache Table. This object gives an indication of the amount of IGMP activity over the lifetime of the row entry.
OBJECT-TYPE    
  Counter32  

csIgmpInterfaceProxyIfIndex 1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.12
Some devices implement a form of IGMP proxying whereby memberships learned on the interface represented by this row, cause IGMP Host Membership Reports to be sent on the interface whose ifIndex value is given by this object. Such a device would implement the csIgmpV2RouterMIBGroup only on its router interfaces (those interfaces with non-zero csIgmpInterfaceProxyIfIndex). Typically, the value of this object is 0, indicating that no proxying is being done.
OBJECT-TYPE    
  InterfaceIndexOrZero  

csIgmpInterfaceGroups 1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.13
The current number of entries for this interface in the Cache Table.
OBJECT-TYPE    
  Gauge32  

csIgmpInterfaceRobustness 1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.14
The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. IGMP is robust to (Robustness Variable-1) packet losses.
OBJECT-TYPE    
  Unsigned32 1..255  

csIgmpInterfaceLastMembQueryIntvl 1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.15
The Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages. This value may be tuned to modify the leave latency of the network. A reduced value results in reduced time to detect the loss of the last member of a group. The value of this object is irrelevant if csIgmpInterfaceVersion is 1.
OBJECT-TYPE    
  Unsigned32 0..255  

csIgmpInterfaceMulticastTTLThreshold 1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.16
The Multicast TTL threshold value to be used by IGMP forwarding. This value is used to contol multicast packets from going beyone a certain number of routers.
OBJECT-TYPE    
  Unsigned32 0..255  

csIgmpInterfaceAdminStatus 1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.17
This attribute controls the enable/disable settings of an IGMP or IGMP Proxy interface. If this attribute is set to disable, the interface configuration will be saved.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csIgmpCacheTable 1.3.6.1.4.1.3085.3.1.4.2.13.1.2
The (conceptual) table listing the IP multicast groups for which there are members on a particular interface.
OBJECT-TYPE    
  SEQUENCE OF  
    CsIgmpCacheEntry

csIgmpCacheEntry 1.3.6.1.4.1.3085.3.1.4.2.13.1.2.1
An entry (conceptual row) in the csIgmpCacheTable.
OBJECT-TYPE    
  CsIgmpCacheEntry  

csIgmpCacheAddress 1.3.6.1.4.1.3085.3.1.4.2.13.1.2.1.1
The IP multicast group address for which this entry contains information.
OBJECT-TYPE    
  IpAddress  

csIgmpCacheIfIndex 1.3.6.1.4.1.3085.3.1.4.2.13.1.2.1.2
The interface for which this entry contains information for an IP multicast group address.
OBJECT-TYPE    
  InterfaceIndex  

csIgmpCacheSelf 1.3.6.1.4.1.3085.3.1.4.2.13.1.2.1.3
An indication of whether the local system is a member of this group address on this interface.
OBJECT-TYPE    
  TruthValue  

csIgmpCacheLastReporter 1.3.6.1.4.1.3085.3.1.4.2.13.1.2.1.4
The IP address of the source of the last membership report received for this IP Multicast group address on this interface. If no membership report has been received, this object has the value 0.0.0.0.
OBJECT-TYPE    
  IpAddress  

csIgmpCacheUpTime 1.3.6.1.4.1.3085.3.1.4.2.13.1.2.1.5
The time elapsed since this entry was created.
OBJECT-TYPE    
  TimeTicks  

csIgmpCacheExpiryTime 1.3.6.1.4.1.3085.3.1.4.2.13.1.2.1.6
The minimum amount of time remaining before this entry will be aged out. A value of 0 indicates that the entry is only present because csIgmpCacheSelf is true and that if the router left the group, this entry would be aged out immediately. Note that some implementations may process membership reports from the local system in the same way as reports from other hosts, so a value of 0 is not required.
OBJECT-TYPE    
  TimeTicks  

csIgmpCacheStatus 1.3.6.1.4.1.3085.3.1.4.2.13.1.2.1.7
The status of this entry.
OBJECT-TYPE    
  RowStatus  

csIgmpCacheVersion1HostTimer 1.3.6.1.4.1.3085.3.1.4.2.13.1.2.1.8
The time remaining until the local router will assume that there are no longer any IGMP version 1 members on the IP subnet attached to this interface. Upon hearing any IGMPv1 Membership Report, this value is reset to the group membership timer. While this time remaining is non-zero, the local router ignores any IGMPv2 Leave messages for this group that it receives on this interface.
OBJECT-TYPE    
  TimeTicks  

csIgmpStaticGroupTable 1.3.6.1.4.1.3085.3.1.4.2.13.1.3
The (conceptual) table listing the IP multicast static groups to which traffic needs to be sent to even if IGMP is not enabled on the respective interface.
OBJECT-TYPE    
  SEQUENCE OF  
    CsIgmpStaticGroupEntry

csIgmpStaticGroupEntry 1.3.6.1.4.1.3085.3.1.4.2.13.1.3.1
An entry (conceptual row) in the csIgmpStaticGroupTable.
OBJECT-TYPE    
  CsIgmpStaticGroupEntry  

csIgmpStaticGroupIfIndex 1.3.6.1.4.1.3085.3.1.4.2.13.1.3.1.1
The interface for which the static group has been configured.
OBJECT-TYPE    
  InterfaceIndex  

csIgmpStaticGroupAddress 1.3.6.1.4.1.3085.3.1.4.2.13.1.3.1.2
The IP multicast group address which corresponds to the configured static group.
OBJECT-TYPE    
  IpAddress  

csIgmpStaticGroupStatus 1.3.6.1.4.1.3085.3.1.4.2.13.1.3.1.3
The activation of a row enables a static group configuration on the interface. The destruction of a row disables the static group configuration on the interface.
OBJECT-TYPE    
  RowStatus  

csIgmpAccessGroupTable 1.3.6.1.4.1.3085.3.1.4.2.13.1.4
The (conceptual) table listing the IP multicast access groups to which traffic needs to be sent to or rejected from. This table will usually be used to reject traffic to a particular set of multicast groups
OBJECT-TYPE    
  SEQUENCE OF  
    CsIgmpAccessGroupEntry

csIgmpAccessGroupEntry 1.3.6.1.4.1.3085.3.1.4.2.13.1.4.1
An entry (conceptual row) in the csIgmpAccessGroupTable.
OBJECT-TYPE    
  CsIgmpAccessGroupEntry  

csIgmpAccessGroupIfIndex 1.3.6.1.4.1.3085.3.1.4.2.13.1.4.1.1
The interface for which the access group has been configured.
OBJECT-TYPE    
  InterfaceIndex  

csIgmpAccessGroupAddress 1.3.6.1.4.1.3085.3.1.4.2.13.1.4.1.2
The IP multicast group address which corresponds to the configured access group.
OBJECT-TYPE    
  IpAddress  

csIgmpAccessGroupStatus 1.3.6.1.4.1.3085.3.1.4.2.13.1.4.1.3
The activation of a row enables a access group configuration on the interface. The destruction of a row disables the access group configuration on the interface.
OBJECT-TYPE    
  RowStatus  

csIgmpGeneralTable 1.3.6.1.4.1.3085.3.1.4.2.13.1.5
MIB object to control router level attributes of IGMP.
OBJECT-TYPE    
  SEQUENCE OF  
    CsIgmpGeneralEntry

csIgmpGeneralEntry 1.3.6.1.4.1.3085.3.1.4.2.13.1.5.1
Information regarding the router level attributes of IGMP.
OBJECT-TYPE    
  CsIgmpGeneralEntry  

csIgmpGeneralEntryRowStatus 1.3.6.1.4.1.3085.3.1.4.2.13.1.5.1.1
The activation of a row enables an IGMP object for the router. The destruction of a row destroys the IGMP object for this router.
OBJECT-TYPE    
  RowStatus  

csOrionPWE3 1.3.6.1.4.1.3085.3.1.4.2.14
OBJECT IDENTIFIER    

csOrionPWE3Objects 1.3.6.1.4.1.3085.3.1.4.2.14.1
OBJECT IDENTIFIER    

csPwVcTable 1.3.6.1.4.1.3085.3.1.4.2.14.1.1
This table specifies information for connecting various emulated services to various tunnel type.
OBJECT-TYPE    
  SEQUENCE OF  
    CsPwVcEntry

csPwVcEntry 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1
A row in this table represents an emulated virtual connection (VC) across a packet network. It is indexed by: - The csPwVcIndex. Uniquely identifying a singular connection (or set of connections). If a set, individual VCs are identified by the Instance.
OBJECT-TYPE    
  CsPwVcEntry  

csPwVcIndex 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.1
Primary index for the conceptual row identifying a VC (or set of VCs) within this PW Emulation VC table.
OBJECT-TYPE    
  PwVcIndex  

csPwVcID 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.2
Used in the outgoing VC ID field within the 'Virtual Circuit FEC Element' when LDP signaling is used.
OBJECT-TYPE    
  PwVcID  

csPwVcOutboundGroupID 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.3
Used in the outbound Group ID field within the 'Virtual Circuit FEC Element' when some control methods (for example LDP) is used for VC setup, zero if not used.
OBJECT-TYPE    
  PwGroupID  

csPwVcInboundGroupID 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.4
Obtained from the inbound Group ID field in the remote 'Virtual Circuit FEC Element' as received by control methods are used for VC setup, zero if not used or not known yet.
OBJECT-TYPE    
  PwGroupID  

csPwVcInboundMTU 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.5
MTU of the interface at the remote PE. 0 means assume same as outbound MTU
OBJECT-TYPE    
  Unsigned32  

csPwVcPeerAddrType 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.6
Denotes the address type of the peer node signaling address if PW signaling is used for the VC creation. It should be set to 'notApplicable' if PE/PW signaling is not used, i.e. csPwVcOwner is set to 'manual'.
OBJECT-TYPE    
  INTEGER ipV4(1), ipV6(2), notApplicable(3)  

csPwVcPeerIpv4Addr 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.7
If csPwVcPeerAddrType is set to ipV4(1), then this value will contain the IPv4 address of the peer node PW/PE signaling entity. This object is otherwise insignificant and should contain a value of 0.
OBJECT-TYPE    
  IpAddress  

csPwVcPeerIpv6Addr 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.8
If csPwVcPeerAddrType is set to ipV6(2), then this value will contain the Ipv6 address of the peer node PW/PE signaling entity. This object is otherwise insignificant and should contain a value of 0.
OBJECT-TYPE    
  IpAddress  

csPwVcOutboundVcLabel 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.9
The VC label used in the outbound direction. It may be set up manually if owner is 'manual' or automatically otherwise. Examples: For MPLS PSN, it represents the 20 bits of VC tag, for L2TP it represent the 16 bits Session ID.
OBJECT-TYPE    
  Unsigned32  

csPwVcInboundVcLabel 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.10
The VC label used in the inbound direction. It may be set up manually if owner is 'manual' or automatically otherwise. Examples: For MPLS PSN, it represents the 20 bits of VC tag, for L2TP it represent the 16 bits Session ID.
OBJECT-TYPE    
  Unsigned32  

csPwVcInboundMode 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.11
This object is used to enable greater security for implementation that use global VC label space. In conservative mode, inbound packets with a VC label are accepted only from tunnels that are associated to the same VC via the inbound tunnel table. The entries in the inbound tunnel table are either explicitly configured or implicitly known by the control protocol used for VC set-up. If such association is not known, not configured or not desired, liberal mode should be configured, and the node should accept the packet based on the VC label only regardless of the outer tunnel used to carry the VC.
OBJECT-TYPE    
  INTEGER liberal(1), conservative(2)  

csPwVcName 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.12
The canonical name assigned to the VC. This name can be used to refer to the VC on the node console port.
OBJECT-TYPE    
  SnmpAdminString  

csPwVcDescr 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.13
A textual string containing information about the VC. If there is no description this object contains a zero length string.
OBJECT-TYPE    
  SnmpAdminString  

csPwVcCreateTime 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.14
System time when this VC was created.
OBJECT-TYPE    
  TimeStamp  

csPwVcUpTime 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.15
Number of consecutive ticks this VC has been 'up' in both directions together (i.e. 'up' is observed in csPwVcOperStatus.)
OBJECT-TYPE    
  TimeTicks  

csPwVcType 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.16
This value dictates what service-specific tables are indexed by csPwVcIndex and csPwVcInstance. For example, if set for 'cem' csPwVcIndex indexes the csPwVcCemTable in [CEMMIB]. Note: CEM will also have the MSBit set in the VC type (0x8008). This is the 'Control Word' bit used within the 'Virtual Circuit FEC Element' when LDP signaling is used
OBJECT-TYPE    
  INTEGER frameRelay(1), atmAal5Vcc(2), atmTransparent(3), ethernetVLAN(4), ethernet(5), hdlcCisco(6), ppp(7), cem(8), atmVccCell(9), atmVpcCell(10), transparentLanService(11), unspecified(12)  

csPwVcOwner 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.17
Set by the operator to indicate the protocol responsible for establishing this VC. Value 'manual' is used in all cases where no signaling is used to set-up the VC, i.e. require configuration of all entries in the VC tables including VC labels, etc. The value 'signaling' is used in case of standard signaling of the VC for the specific PSN, for example LDP for MPLS PSN as specified in . Value 'other' is used for other types of signaling.
OBJECT-TYPE    
  INTEGER manual(1), signaling(2), other(3)  

csPwVcPsnType 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.18
Set by the operator to indicate the PSN type on which this VC will be carried. Based on this object, the relevant PSN table entries are created in the in the PSN specific MIB modules. For example, if mpls(1) is defined, the agent create an entry in csPwVcMplsTable, which further define the MPLS PSN configuration.
OBJECT-TYPE    
  INTEGER mpls(1), l2tp(2), ip(3), mplsOverIp(4), gre(5), other(6)  

csPwVcPriority 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.19
This object define the relative priority of the VC instance in a lowest-to-highest fashion. VC instances with the same priority are treated with equal priority (i.e. are signaled in parallel). VC instances dropped will be set 'dormant' (as indicated in csPwVcOperStatus).
OBJECT-TYPE    
  Unsigned32  

csPwVcAdminStatus 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.20
The desired operational status of this VC. It is set by the operator if csPwVcIsIf is set to false. Otherwise, it reflects the ifIndex AdminStatus.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

csPwVcOperStatus 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.21
Indicates the actual combined operational status of this VC. It is 'up' if both csPwVcInboundOperStatus and csPwVcOutboundOperStatus are in 'up' state. For all other values, if the VCs in both directions are of the same value it reflects that value, otherwise it is set to 'unknown', and the operator may consult the per direction OperStatus for fault isolation.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3), unknown(4), dormant(5), notPresent(6), lowerLayerDown(7)  

csPwVcInboundOperStatus 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.22
Indicates the actual operational status of this VC in the inbound direction. - down: if PW signaling has not yet finished, or indications available at the service level indicate that the VC is not passing packets. - testing: if AdminStatus at the VC level is set to test. - dormant: The VC is not available because of the required resources are occupied VC with higher priority VCs . - notPresent: Some component is missing to accomplish the set up of the VC. - lowerLayerDown: The underlying PSN is not in OperStatus 'up'.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3), unknown(4), dormant(5), notPresent(6), lowerLayerDown(7)  

csPwVcOutboundOperStatus 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.23
Indicates the actual operational status of this VC in the outbound direction - down: if PW signaling has not yet finished, or indications available at the service level indicate that the VC is not passing packets. - testing: if AdminStatus at the VC level is set to test. - dormant: The VC is not available because of the required resources are occupied VC with higher priority VCs . - notPresent: Some component is missing to accomplish the set up of the VC. - lowerLayerDown: The underlying PSN is not in OperStatus 'up'.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3), unknown(4), dormant(5), notPresent(6), lowerLayerDown(7)  

csPwVcRowStatus 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.24
For creating, modifying, and deleting this row.
OBJECT-TYPE    
  RowStatus  

csPwVcStorageType 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.25
This variable indicates the storage type for this object.
OBJECT-TYPE    
  StorageType  

csPwVcCeIntf 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.26
This object is used to identify the CE interface. This format allows for many formats. We only support LI for now. The format used for this ascii-string valued object is as follows: 'B|L VPNID|SlotID/VRID|PortID/VIID|LLID:BIID' Where 'B' indicates the other end is a Bridge Interface. 'L' indicates this connection maps to a Logical Link. 'VPNID' is a Virtual Private Network ID. 'SlotID' identifies a specific slot on the Orion Box. 'VRID' is a Virtual Router ID for the VPN specified by VPNID. 'PortID' identifies a specific Port on the blade installed in the previously identified slot. 'VIID' is a Virtual Interface on the VR identified by VRID. 'LLID' is a Logical Link ID on PortID. æBIIDÆ is the bridge interface ID. For example, if this connection maps to a bridge interface. (BI 3 on VI number 1 on VR 1.2.3.4 on VPN 4), this object might be set to this value: 'B 4/1.2.3.4/1:3' If this connection maps to subinterface 20 on Logical Link 100 on Port 2 of Slot 2, this object might be set to this value: 'L 2/2:100:10' If this Virtual Interface has not been mapped, this object will have the value 'DISCONNECTED'.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csPwVcForwardSlot 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.27
Slot number of the data forwarding processor engine. 0 means not set.
OBJECT-TYPE    
  Unsigned32 0..26  

csPwVcForwardPE 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.28
Processor engine number of the data forwarding processor engine. 0 means not set.
OBJECT-TYPE    
  Unsigned32 0..65535  

csPwVcCtrlWord 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.29
Include and except control word in the data packets.
OBJECT-TYPE    
  TruthValue  

csPwVcSeqNumber 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.30
Include and check the sequence numbers.
OBJECT-TYPE    
  TruthValue  

csPwVcTestResult 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.31
The result of the previous testing request.
OBJECT-TYPE    
  INTEGER testNotInProgress(1), testResultUnknown(2), testFailed(3), testSucceded(4)  

csPwVcVlanId 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.32
The result of the previous testing request. Note: A valid VLAN ID should be provided if Connected to a BI.
OBJECT-TYPE    
  Unsigned32 0..4094  

csPwVcCustomerId 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.33
Customer ID field.
OBJECT-TYPE    
  Unsigned32  

csPwVcCustomerName 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.34
Customer name field.
OBJECT-TYPE    
  SnmpAdminString  

csPwe3ConfTable 1.3.6.1.4.1.3085.3.1.4.2.14.1.2
This table is used to Configure Mpls on a Virtual Router.
OBJECT-TYPE    
  SEQUENCE OF  
    CsPwe3ConfEntry

csPwe3ConfEntry 1.3.6.1.4.1.3085.3.1.4.2.14.1.2.1
This entry is indexed by the VPN and VR ID
OBJECT-TYPE    
  CsPwe3ConfEntry  

csPwe3EventLogLevel 1.3.6.1.4.1.3085.3.1.4.2.14.1.2.1.1
This object is used to set the level of details for event logs for L2oL3
OBJECT-TYPE    
  INTEGER critical(1), error(2), warning(3), information(4), debug(5)  

csPwe3EventLogArea 1.3.6.1.4.1.3085.3.1.4.2.14.1.2.1.2
Each bit within this object enables logging for a specific area within the Pwe3 instance. Below is a list of the different areas available for logging: area bit ------------------------------------------------------ events 0 forwarding 1 end of description.
OBJECT-TYPE    
  Integer32  

csPwe3ConfRowStatus 1.3.6.1.4.1.3085.3.1.4.2.14.1.2.1.3
The existence state of this table. This object follows the Row Status behaviour
OBJECT-TYPE    
  RowStatus  

csOrionVPNNotifyInfo 1.3.6.1.4.1.3085.3.1.4.3
OBJECT IDENTIFIER    

csOrionChangeTableOID 1.3.6.1.4.1.3085.3.1.4.3.1
Object identifier of the Table, which was changed.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

csOrionChangeSource 1.3.6.1.4.1.3085.3.1.4.3.2
The source of the configuration change (illegal).
OBJECT-TYPE    
  INTEGER cli(1), httpd(2), snmp(3)  

csOrionChangeSourceUserName 1.3.6.1.4.1.3085.3.1.4.3.3
A textual string containing information about the user name of the source configuration change.
OBJECT-TYPE    
  DisplayString  

csOrionLogLinkSlotIndex 1.3.6.1.4.1.3085.3.1.4.3.4
For Logical Link up/down traps, this identifies the slot index of the Logical Link.
OBJECT-TYPE    
  Integer32  

csOrionLogLinkPortIndex 1.3.6.1.4.1.3085.3.1.4.3.5
For Logical Link up/down traps, this identifies the port index (relative to the slot index) of the Logical Link.
OBJECT-TYPE    
  Integer32  

csOrionLogLinkChannelIndex 1.3.6.1.4.1.3085.3.1.4.3.6
For Logical Link up/down traps, this identifies the channel index (relative to the slot/port index) of the Logical Link. If there is no channel, this object has the value -1.
OBJECT-TYPE    
  Integer32  

csOrionLogLinkSubIfIndex 1.3.6.1.4.1.3085.3.1.4.3.7
For Logical Link up/down traps, this identifies the sub interface index (relative to the slot/port[:chan] index) of the Logical Link. If there is no sub interface, this object has the value -1.
OBJECT-TYPE    
  Integer32  

csOrionNumConfigChanges 1.3.6.1.4.1.3085.3.1.4.3.8
Number of changed objects for which the csOrionConfigChange Trap PDU generated. This identifies the number of VarBinds follows this object in the csOrionConfigChange Trap PDU.
OBJECT-TYPE    
  Integer32 1..15  

csOrionConfigChangeType 1.3.6.1.4.1.3085.3.1.4.3.9
For ConfigChange Traps, this identifies the type of change that was made on a table. For scalar objects, this always has the value 1.
OBJECT-TYPE    
  INTEGER delete(1), addModify(2)  

csOrionPortIndex 1.3.6.1.4.1.3085.3.1.4.3.10
For port level alarms related traps, this identifies the port index (relative to the slot index) of the alarm origination.
OBJECT-TYPE    
  Integer32  

csOrionRestoreBladeStatus 1.3.6.1.4.1.3085.3.1.4.3.11
Blade Restoration status. Fail if blade is not restored successfully. Success if blade restoration is successfull. Cold-start if blade reboots. Note that cold-start will not have restored data presented in the trap packet
OBJECT-TYPE    
  INTEGER fail(1), success(2), coldStart(3)  

csOrionRestoreSlotIndex 1.3.6.1.4.1.3085.3.1.4.3.12
Slot number of the affected blade.
OBJECT-TYPE    
  Integer32  

csOrionRestoreNumVRs 1.3.6.1.4.1.3085.3.1.4.3.13
Number of VRs affected by this blade restoration trap. This corresponds the number of VPN/VRs that follows.
OBJECT-TYPE    
  Integer32  

csOrionAlarmType 1.3.6.1.4.1.3085.3.1.4.3.14
For port level alarms related DS3 traps, this identifies the alarm which is cleared now.
OBJECT-TYPE    
  INTEGER farEndReceiveFailure(0), lossOfSignal(1), lossOfFrame(2), lossOfClock(3), alarmIndicationSignal(4), portIdleAlarm(5)  

csOrionOc3AlarmType 1.3.6.1.4.1.3085.3.1.4.3.15
For port level alarms related OC3 traps, this identifies the type of alarm being sent out.
OBJECT-TYPE    
  INTEGER lossOfClock(1), farEndProtectLineFail(2), nearEndProtectLineFail(3), protectSwtichByteFail(4), channelMismatchFail(5), apsModeMismatch(6), remoteDefectIndicatorLine(7), noId(8), lossOfSignal(9), lossOfFrame(10), alarmIndicatSignalLine(11), alarmIndicatSignalPath(12), lossOfPointer(13), signalLabelMismatch(14), j1PTMismatch(15), lossOfCellDeliniation(16), remoteDefectIndicatorPath(17), numOfAlarmCountDummy(18)  

csOrionAlarmAffectType 1.3.6.1.4.1.3085.3.1.4.3.16
Indicates that it is a not service affecting alarm or a service affecting alarm.
OBJECT-TYPE    
  INTEGER notServiceAffect(1), serviceAffect(2)  

csOrionAlarmSeverityType 1.3.6.1.4.1.3085.3.1.4.3.17
Indicates the severity of this alarm.
OBJECT-TYPE    
  INTEGER minor(1), major(2), critical(3)  

csOrionLogLinkModuleIndex 1.3.6.1.4.1.3085.3.1.4.3.18
For Logical Link up/down traps, this identifies the module index (relative to the slot index) of the Logical Link.
OBJECT-TYPE    
  Integer32  

csOrionModuleIndex 1.3.6.1.4.1.3085.3.1.4.3.19
For Logical Link up/down traps, this identifies the module index (relative to the slot index) of the Logical Link.
OBJECT-TYPE    
  Integer32  

csOrionVPNServerInfo 1.3.6.1.4.1.3085.3.1.4.4
OBJECT IDENTIFIER    

csRadiusServer 1.3.6.1.4.1.3085.3.1.4.4.1
OBJECT IDENTIFIER    

csDnsServer 1.3.6.1.4.1.3085.3.1.4.4.2
OBJECT IDENTIFIER    

csOrionBladeInfo 1.3.6.1.4.1.3085.3.1.5
OBJECT IDENTIFIER    

csOrionBladeTable 1.3.6.1.4.1.3085.3.1.5.1
A list of Blades which belongs to Orion box.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionBladeEntry

csOrionBladeEntry 1.3.6.1.4.1.3085.3.1.5.1.1
An entry containing management information applicable to a particular Blade.
OBJECT-TYPE    
  CsOrionBladeEntry  

csOrionBladeSlotLocation 1.3.6.1.4.1.3085.3.1.5.1.1.1
Slot Location of the Blade in the Orion box.
OBJECT-TYPE    
  Integer32 1..26  

csOrionBladeDescr 1.3.6.1.4.1.3085.3.1.5.1.1.2
A textual string containing information about the blade. This string should include the name of the manufacturer and the product name.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

csOrionBladeType 1.3.6.1.4.1.3085.3.1.5.1.1.3
The type of blade inserted in this slot.
OBJECT-TYPE    
  INTEGER process(1), control(2), ethernet(3), ds3Unchannelized(4), ds3channelized(5), oc3Atm(6), oc3Pos(7), e3Unchannelized(8), e3channelized(9), gige(10), oc12atm(11), oc12pos(12), quad-oc3-atm(13), ipsg(14)  

csOrionBladeState 1.3.6.1.4.1.3085.3.1.5.1.1.4
The current state of this blade.
OBJECT-TYPE    
  INTEGER notPresent(1), inactive(2), active(3), softwareLoading(4), operational(5), nonOperational(6), failedWithBackup(7), failedWithOutBackup(8), backup(9), standby(10), reboot(11), disabled(12), master(13)  

csOrionBladeEnginesNumb 1.3.6.1.4.1.3085.3.1.5.1.1.5
The number of engines on the blade. NOTE: This object is not used.
OBJECT-TYPE    
  Integer32  

csOrionBladePortNumb 1.3.6.1.4.1.3085.3.1.5.1.1.6
The number of ports on this blade (note, process blades have no ports).
OBJECT-TYPE    
  Integer32 0..200  

csOrionBladeSerialNumb 1.3.6.1.4.1.3085.3.1.5.1.1.7
The serial number of the blade. This is a series of alphanumeric characters which uniquely identifies this blade. NOTE: This object is not used.
OBJECT-TYPE    
  DisplayString  

csOrionBladeHwVer 1.3.6.1.4.1.3085.3.1.5.1.1.8
A textual string containing information about the hardware revision version. NOTE: This object is not used.
OBJECT-TYPE    
  DisplayString  

csOrionBladeSwVer 1.3.6.1.4.1.3085.3.1.5.1.1.9
A textual string containing information about the software revision version. NOTE: This object is not used.
OBJECT-TYPE    
  DisplayString  

csOrionBladeReset 1.3.6.1.4.1.3085.3.1.5.1.1.10
The software reset for this blade. It is an action object such that when set to 'reset' will reset this blade. Setting it to 'none' has no effect, and when it is retrieved the value will always be 'none'.
OBJECT-TYPE    
  INTEGER none(1), reset(2)  

csOrionBladeConfigAttributes 1.3.6.1.4.1.3085.3.1.5.1.1.11
Contains the configured or static parameters of this blade. Each parameter is represented by a type-lenth-value data structure. A single TLV may contain individual TLVs. The types IDs currently supported are : 1 - Description (string) [sample only] more parameters will be added. NOTE: This object is deprecated and is replaced by individual objects starting from csOrionBladeModelNumb.
OBJECT-TYPE    
  OCTET STRING SIZE(0..2000)  

csOrionBladeOperAttributes 1.3.6.1.4.1.3085.3.1.5.1.1.12
Contains the operational or dynamic parameters of this blade. Each parameter is represented by a type-lenth-value data structure. A single TLV may contain individual TLVs. The types IDs currently supported are : 1 - Description (string) [sample only] more parameters will be added. NOTE: This object is deprecated and is replaced by individual objects starting from csOrionBladeTemperatureSensor1.
OBJECT-TYPE    
  OCTET STRING SIZE(0..2000)  

csOrionBladeModelNumb 1.3.6.1.4.1.3085.3.1.5.1.1.13
A textual string containing information about the model number of the blade.
OBJECT-TYPE    
  DisplayString SIZE(0..40)  

csOrionBladeCLEICode 1.3.6.1.4.1.3085.3.1.5.1.1.14
A textual string containing information about the CLEI of the blade.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionBladeFPGAVersion 1.3.6.1.4.1.3085.3.1.5.1.1.15
A textual string containing information about the FPGA version of the blade.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

csOrionBladePort1MacAddr 1.3.6.1.4.1.3085.3.1.5.1.1.16
MAC Address of ethernet port 1 on the blade. Applies only to control or ethernet blade.
OBJECT-TYPE    
  MacAddress  

csOrionBladePort2MacAddr 1.3.6.1.4.1.3085.3.1.5.1.1.17
MAC Address of ethernet port 2 on the blade. Applies only to control or ethernet blade.
OBJECT-TYPE    
  MacAddress  

csOrionBladePort3MacAddr 1.3.6.1.4.1.3085.3.1.5.1.1.18
MAC Address of ethernet port 3 on the blade. Applies only to control or ethernet blade.
OBJECT-TYPE    
  MacAddress  

csOrionBladePort4MacAddr 1.3.6.1.4.1.3085.3.1.5.1.1.19
MAC Address of ethernet port 4 on the blade. Applies only to control or ethernet blade.
OBJECT-TYPE    
  MacAddress  

csOrionBladeIPSXLoaderProduct 1.3.6.1.4.1.3085.3.1.5.1.1.20
A textual string containing information about the IPSX loader.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

csOrionBladeIPSXLoaderVersion 1.3.6.1.4.1.3085.3.1.5.1.1.21
A textual string containing information about the version of the loader NOTE: This object is not used.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionBladeIPSXLoaderDate 1.3.6.1.4.1.3085.3.1.5.1.1.22
A textual string containing information about the date of the loader. NOTE: This object is not used.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionBladeIPSXLoaderTime 1.3.6.1.4.1.3085.3.1.5.1.1.23
A textual string containing information about the time of the loader.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionBladeTemperatureSensor1 1.3.6.1.4.1.3085.3.1.5.1.1.24
A textual string containing information about the temperature of sensor 1.
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

csOrionBladeTemperatureSensor2 1.3.6.1.4.1.3085.3.1.5.1.1.25
A textual string containing information about the temperature of sensor 2.
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

csOrionBladeTemperatureSensor3 1.3.6.1.4.1.3085.3.1.5.1.1.26
A textual string containing information about the temperature of sensor 3.
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

csOrionBladeTemperatureSensor4 1.3.6.1.4.1.3085.3.1.5.1.1.27
A textual string containing information about the temperature of sensor 4.
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

csOrionBladeShutdown 1.3.6.1.4.1.3085.3.1.5.1.1.28
The software shutdown for this blade. It is an action object such that when set to 'shutdown' will stop the file-system on this blade. Setting it to 'none' has no effect, and when it is retrieved the value will always be 'none'.
OBJECT-TYPE    
  INTEGER none(1), shutdown(2)  

csOrionBladeNumSharcCrypto 1.3.6.1.4.1.3085.3.1.5.1.1.29
Number of crypto modules present on the sharc blade
OBJECT-TYPE    
  Integer32 0..2  

csOrionBladeSharcCryptoModuleId1 1.3.6.1.4.1.3085.3.1.5.1.1.30
Blade port in which the first crypto is present (Note, -1 indicates that there are no crypto modules in the blade)
OBJECT-TYPE    
  Integer32 -1..5  

csOrionBladeSharcCryptoModuleId2 1.3.6.1.4.1.3085.3.1.5.1.1.31
Blade port in which the first crypto is present (Note, -1 indicates that there are one or less crypto modules in the blade)
OBJECT-TYPE    
  Integer32 -1..5  

csOrionBladeSharcCryptoType1 1.3.6.1.4.1.3085.3.1.5.1.1.32
Type of the first sharc crypto module present
OBJECT-TYPE    
  INTEGER none(0), sharcCrypto(8)  

csOrionBladeSharcCryptoType2 1.3.6.1.4.1.3085.3.1.5.1.1.33
Type of the second sharc crypto module present
OBJECT-TYPE    
  INTEGER none(0), sharcCrypto(8)  

csOrionBladeSharcCryptoSerial1 1.3.6.1.4.1.3085.3.1.5.1.1.34
The serial number of the first sharc crypto module - series of alphanumeric characters which uniquely identifies the crypto module on this blade.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

csOrionBladeSharcCryptoSerial2 1.3.6.1.4.1.3085.3.1.5.1.1.35
The serial number of the second sharc crypto module - series of alphanumeric characters which uniquely identifies the crypto module on this blade.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

csOrionBladeSharcCryptoAssembly1 1.3.6.1.4.1.3085.3.1.5.1.1.36
The assembly number of the first sharc crypto module
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

csOrionBladeSharcCryptoAssembly2 1.3.6.1.4.1.3085.3.1.5.1.1.37
The assembly number of the second sharc crypto module
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

csOrionEngineTable 1.3.6.1.4.1.3085.3.1.5.2
A list of Process Engines such as CPU, Search Engine and Encryption Engine which exist in the Orion box. This table is used as csOrionModuleTable. Engine becomes a special type of Module. Module can also be a network interface. To keep the minimum change in 3.0 for the addition of module and maintain the compatibility between 3.0 and 3.1, the name of csOrionEngineTable is still used in 3.0. After 3.1, this table will be rename as csOrionModuleTable.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionEngineEntry

csOrionEngineEntry 1.3.6.1.4.1.3085.3.1.5.2.1
An entry containing management information applicable to a particular process engine.
OBJECT-TYPE    
  CsOrionEngineEntry  

csOrionEngineIndex 1.3.6.1.4.1.3085.3.1.5.2.1.1
A unique value for each engine.
OBJECT-TYPE    
  Integer32 0..65535  

csOrionEngineMemorySize 1.3.6.1.4.1.3085.3.1.5.2.1.2
The size of the memory for the specified Engine, in bytes. NOTE: This object is not used.
OBJECT-TYPE    
  Integer32 1..2147483647  

csOrionEngineMemoryUtil 1.3.6.1.4.1.3085.3.1.5.2.1.3
The current percentage utilization of the memory for the specified Engine.
OBJECT-TYPE    
  Integer32 0..100  

csOrionEngineType 1.3.6.1.4.1.3085.3.1.5.2.1.5
A type of the process engine.
OBJECT-TYPE    
  INTEGER mainCpu(1), cpu(2), search(3), encryption(4), dualCpus(5), singleCpu(6), cpuHwFwdEng(7), baseBlade(8), evalBaseBlade(9), switchFabric(10), sharcCpu(11), sharcCrypto(12), gigeInterface(13), oc12PosMm(14), oc12PosSm(15), oc12AtmMm(16), oc12AtmSm(17), quadOc3PosMm(18), quadOc3PosSm(19), quadOc3AtmMm(20), quadOc3AtmSm(21), triPortDs3U(22), triPortE3U(23), triPortDs3C(24), dualOc3Ch(25), dualGige(26), eightPortOc3AtmMm(27), eightPortOc3AtmSm(28), dualPortOc12AtmMm(29), dualPortOc12AtmSm(30), dualPortOc12PosMm(31), dualPortOc12PosSm(32), sharcBoot(33), osLoader(34), sharcControl(35), sharcCpuSingle(36), sharcCpuFwd(37), midPlane(38), quadOc3ChMm(39), quadOc3ChSm(40), dualPortOc12ChMm(41), dualPortOc12ChSm(42)  

csOrionEngineDescr 1.3.6.1.4.1.3085.3.1.5.2.1.6
A textual string containing information about the process engine manufacturer and the product name. NOTE: This object is not used.
OBJECT-TYPE    
  DisplayString  

csOrionEngineUtilization 1.3.6.1.4.1.3085.3.1.5.2.1.7
A % utilization for the specified Engine.
OBJECT-TYPE    
  Integer32 0..100  

csOrionEngineTemperature 1.3.6.1.4.1.3085.3.1.5.2.1.8
A temperature (in Fahrenheit or Celsius near the specified Engine. NOTE: This object is not used.
OBJECT-TYPE    
  Integer32 -67..257  

csOrionEngineState 1.3.6.1.4.1.3085.3.1.5.2.1.9
The current state of this engine.
OBJECT-TYPE    
  INTEGER notPresent(1), inactive(2), active(3), softwareLoading(4), operational(5), nonOperational(6), failedWithBackup(7), failedWithOutBackup(8), backup(9), standby(10), reboot(11)  

csOrionEngineConfigAttributes 1.3.6.1.4.1.3085.3.1.5.2.1.10
Contains the configured or static parameters of this engine. Each parameter is represented by a type-lenth-value data structure. A single TLV may contain individual TLVs. The types IDs currently supported are : 1 - Description (string) [sample only] more parameters will be added. NOTE: This object is deprecated and is replaced by individual objects starting from csOrionEngineLoaderProduct.
OBJECT-TYPE    
  OCTET STRING SIZE(0..2000)  

csOrionEngineOperAttributes 1.3.6.1.4.1.3085.3.1.5.2.1.11
Contains the operational or dynamic parameters of this engine. Each parameter is represented by a type-lenth-value data structure. A single TLV may contain individual TLVs. The types IDs currently supported are : 1 - Description (string) [sample only] more parameters will be added. NOTE: This object is deprecated and is replaced by individual objects starting from csOrionEngineMemoryAllocs.
OBJECT-TYPE    
  OCTET STRING SIZE(0..2000)  

csOrionEngineLoaderProduct 1.3.6.1.4.1.3085.3.1.5.2.1.12
A textual string containing information about the engine loader.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

csOrionEngineLoaderVersion 1.3.6.1.4.1.3085.3.1.5.2.1.13
A textual string containing information about the version of the loader.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionEngineLoaderDate 1.3.6.1.4.1.3085.3.1.5.2.1.14
A textual string containing information about the date of the loader.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionEngineLoaderTime 1.3.6.1.4.1.3085.3.1.5.2.1.15
A textual string containing information about the time of the loader.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionEngineApplicationProduct 1.3.6.1.4.1.3085.3.1.5.2.1.16
A textual string containing information about the application.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

csOrionEngineApplicationVersion 1.3.6.1.4.1.3085.3.1.5.2.1.17
A textual string containing information about the version of the application.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionEngineApplicationDate 1.3.6.1.4.1.3085.3.1.5.2.1.18
A textual string containing information about the date of the application.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionEngineApplicationTime 1.3.6.1.4.1.3085.3.1.5.2.1.19
A textual string containing information about the time of the application.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionEngineSerialNumb 1.3.6.1.4.1.3085.3.1.5.2.1.20
The serial number of the engine. This is a series of alphanumeric characters which uniquely identifies the engine on this blade.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

csOrionEngineAssemblyNumb 1.3.6.1.4.1.3085.3.1.5.2.1.21
The assembly number of the engine.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

csOrionEngineCpuType 1.3.6.1.4.1.3085.3.1.5.2.1.22
The type of cpu for the engine.
OBJECT-TYPE    
  INTEGER mips-rm5270(1), mips-rm5271(2), mips-rm7000(3), mips-unknown(255)  

csOrionEngineCpuVersion 1.3.6.1.4.1.3085.3.1.5.2.1.23
The CPU version of the engine.
OBJECT-TYPE    
  Integer32  

csOrionEngineDataCacheSize 1.3.6.1.4.1.3085.3.1.5.2.1.24
Data cache size of the engine.
OBJECT-TYPE    
  Gauge32  

csOrionEngineInstructionCacheSize 1.3.6.1.4.1.3085.3.1.5.2.1.25
Instruction cache size of the engine.
OBJECT-TYPE    
  Gauge32  

csOrionEngineSecondaryCacheSize 1.3.6.1.4.1.3085.3.1.5.2.1.26
Secondary cache size of the engine.
OBJECT-TYPE    
  Gauge32  

csOrionEngineLevel3CacheSize 1.3.6.1.4.1.3085.3.1.5.2.1.27
Level 3 cache size of the engine.
OBJECT-TYPE    
  Gauge32  

csOrionEngineMemoryAllocs 1.3.6.1.4.1.3085.3.1.5.2.1.28
Memory allocated for the engine.
OBJECT-TYPE    
  Gauge32  

csOrionEngineMemoryAllocFailures 1.3.6.1.4.1.3085.3.1.5.2.1.29
Memory allocation failures for the engine.
OBJECT-TYPE    
  Gauge32  

csOrionEngineMemoryFrees 1.3.6.1.4.1.3085.3.1.5.2.1.30
Memory freed for the engine.
OBJECT-TYPE    
  Gauge32  

csOrionEngineMemoryBadFrees 1.3.6.1.4.1.3085.3.1.5.2.1.31
Memory free failures for the engine.
OBJECT-TYPE    
  Gauge32  

csOrionEngineMemoryBytesAllocs 1.3.6.1.4.1.3085.3.1.5.2.1.32
Bytes allocated for the engine.
OBJECT-TYPE    
  Gauge32  

csOrionEngineMemoryBytesFreed 1.3.6.1.4.1.3085.3.1.5.2.1.33
Bytes freed for the engine.
OBJECT-TYPE    
  Gauge32  

csOrionEngineFreeMemory 1.3.6.1.4.1.3085.3.1.5.2.1.34
Free memory for the engine.
OBJECT-TYPE    
  Gauge32  

csOrionEngineLargestFreeMemory 1.3.6.1.4.1.3085.3.1.5.2.1.35
Size of the largest free memory block for the engine.
OBJECT-TYPE    
  Gauge32  

csOrionEngineFreeMemoryMedium 1.3.6.1.4.1.3085.3.1.5.2.1.36
Free memory, in 100 KByte unit, averaged over the last 30 seconds.
OBJECT-TYPE    
  Gauge32  

csOrionEngineFreeMemoryLong 1.3.6.1.4.1.3085.3.1.5.2.1.37
Free memory, in 100 KByte unit, averaged over the last 10 minutes.
OBJECT-TYPE    
  Gauge32  

csOrionEngineUtilizationMedium 1.3.6.1.4.1.3085.3.1.5.2.1.38
CPU utilization averaged over the last 30 seconds.
OBJECT-TYPE    
  Integer32 0..100  

csOrionEngineUtilizationLong 1.3.6.1.4.1.3085.3.1.5.2.1.39
CPU utilization averaged over the last 10 minutes.
OBJECT-TYPE    
  Integer32 0..100  

csOrionEngineForwardingMode 1.3.6.1.4.1.3085.3.1.5.2.1.40
Packet Forarding Mode for the Engine,HW Prefix,HW Flow,SW Passthrough
OBJECT-TYPE    
  Integer32 0..2  

csOrionEngineOsVersion 1.3.6.1.4.1.3085.3.1.5.2.1.41
The OS version of the engine/module.
OBJECT-TYPE    
  Integer32  

csOrionServiceQueueInfo 1.3.6.1.4.1.3085.3.1.5.3
OBJECT IDENTIFIER    

csOrionQueueGroupTable 1.3.6.1.4.1.3085.3.1.5.3.1
A list of group of queues found in every blade
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionQueueGroupEntry

csOrionQueueGroupEntry 1.3.6.1.4.1.3085.3.1.5.3.1.1
An entry containing management information applicable to a particular group of queue.
OBJECT-TYPE    
  CsOrionQueueGroupEntry  

csOrionQueueGroupType 1.3.6.1.4.1.3085.3.1.5.3.1.1.1
Indicates the type of queue group. 'systemQueue' is a group of queue used by the system as it sends out packets to the backplane. 'portQueue' is used by the the interface ports.
OBJECT-TYPE    
  INTEGER systemQueue(1), portQueue(2)  

csOrionQueueGroupId 1.3.6.1.4.1.3085.3.1.5.3.1.1.2
A unique id for each group of Queues. Currently (March 2001, for Release 3.0), there is only one group of queues to be shared by all ports/interfaces. And also one group of queues used to send out packets to the packet-ring. A future hardware version could come up with one group of queues per port, or multiple system queues. Our MIB model is ready for that.
OBJECT-TYPE    
  Integer32 1..100  

csOrionQueueGroupPriorityIndex 1.3.6.1.4.1.3085.3.1.5.3.1.1.3
A unique id for each group of priority of Queues. Currently (July 2001, for Release 3.0), there is only four priority groups. Priority Group 1, 2 and 3 have 100% and priority group 4 a group of 5 queues.
OBJECT-TYPE    
  Integer32 1..4  

csOrionQueueGroupSubGroupAllocation 1.3.6.1.4.1.3085.3.1.5.3.1.1.4
An action object used to set the weigth of all queues that belong to the same group priority. It starts with octet 1 for the first queue and octet n-1 for the last queue. Each value will be propagated to the parameter csOrionQueueWeight of a specific csOrionQueueEntry. That should be used for reading. Currently(rel.3.0), a single priority group can have only a maximum of 5 queues. And, sum of percentage of all the Queues must not exceed 100%
OBJECT-TYPE    
  OCTET STRING SIZE(1..15)  

csOrionQueueGroupOperStatus 1.3.6.1.4.1.3085.3.1.5.3.1.1.5
Indicates operational status of this queue group.
OBJECT-TYPE    
  OperStatus  

csOrionQueueGroupTableEnd 1.3.6.1.4.1.3085.3.1.5.3.2
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionQueueTable 1.3.6.1.4.1.3085.3.1.5.3.3
A list of individual queues in every csOrionGroupQueueTable
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionQueueEntry

csOrionQueueEntry 1.3.6.1.4.1.3085.3.1.5.3.3.1
An entry containing management information applicable to a particular queue.
OBJECT-TYPE    
  CsOrionQueueEntry  

csOrionQueueId 1.3.6.1.4.1.3085.3.1.5.3.3.1.1
A unique id for each queue. Currently(rel.3.0), there are only 8 queues in every group.
OBJECT-TYPE    
  Integer32 1..8  

csOrionQueueClassOfService 1.3.6.1.4.1.3085.3.1.5.3.3.1.2
Identifies a class of service this queue is handling.
OBJECT-TYPE    
  INTEGER control(1), efGuaranteed(2), ef(3), af1(4), af2(5), af3(6), af4(7), be(8)  

csOrionQueueWeight 1.3.6.1.4.1.3085.3.1.5.3.3.1.3
Weight setting of this queue for scheduling expressed in percent. This can be modified along with other queues on the same priority group through the object csOrionQueueGroupPriorityAllocation.
OBJECT-TYPE    
  Integer32 0..100  

csOrionQueueMinThresholdForRed 1.3.6.1.4.1.3085.3.1.5.3.3.1.4
Min threshold to start discarding the red packet. Represented as the percentage of the queue size, 256KB.
OBJECT-TYPE    
  INTEGER 0..100  

csOrionQueueMinThresholdForYellow 1.3.6.1.4.1.3085.3.1.5.3.3.1.5
Min threshold to start discarding the yellow packet. Represented as the percentage of the queue size, 256KB.
OBJECT-TYPE    
  INTEGER 0..100  

csOrionQueueMinThresholdForGreen 1.3.6.1.4.1.3085.3.1.5.3.3.1.6
Min threshold to start discarding the green packet. Represented as the percentage of the queue size, 256KB.
OBJECT-TYPE    
  INTEGER 0..100  

csOrionQueueMaxRandomForRed 1.3.6.1.4.1.3085.3.1.5.3.3.1.7
The max_random for red puts a cap on the random number generated by hardware Represented in .
OBJECT-TYPE    
  INTEGER 0..65535  

csOrionQueueMaxRandomForYellow 1.3.6.1.4.1.3085.3.1.5.3.3.1.8
The max_random for yellow puts a cap on the random number generated by hardware Represented in .
OBJECT-TYPE    
  INTEGER 0..65535  

csOrionQueueMaxRandomForGreen 1.3.6.1.4.1.3085.3.1.5.3.3.1.9
The max_random for green puts a cap on the random number generated by hardware Represented in .
OBJECT-TYPE    
  INTEGER 0..65535  

csOrionQueueMaxThreshold 1.3.6.1.4.1.3085.3.1.5.3.3.1.10
Max threshold to discarding packets (red, yellow and green). Represented as the percentage of the queue size, 256KB.
OBJECT-TYPE    
  INTEGER 0..65535  

csOrionQueueTotalByteCount 1.3.6.1.4.1.3085.3.1.5.3.3.1.11
Total number of bytes dropped.
OBJECT-TYPE    
  Counter32  

csOrionQueuePacketCount 1.3.6.1.4.1.3085.3.1.5.3.3.1.12
Total number of packets counted so far.
OBJECT-TYPE    
  Counter32  

csOrionQueueAverageSize 1.3.6.1.4.1.3085.3.1.5.3.3.1.13
Average Queue Size at the present moment
OBJECT-TYPE    
  Counter32  

csOrionBladeInfoEnd 1.3.6.1.4.1.3085.3.1.5.4
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionServiceInfo 1.3.6.1.4.1.3085.3.1.6
OBJECT IDENTIFIER    

csOrionAccessListInfo 1.3.6.1.4.1.3085.3.1.6.1
OBJECT IDENTIFIER    

csOrionAccessListTable 1.3.6.1.4.1.3085.3.1.6.1.1
A list of Access List Entries.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionAccessListEntry

csOrionAccessListEntry 1.3.6.1.4.1.3085.3.1.6.1.1.1
An entry containing filtering information used to classify packets.
OBJECT-TYPE    
  CsOrionAccessListEntry  

csOrionAccessListId 1.3.6.1.4.1.3085.3.1.6.1.1.1.1
An identifier for this Access List Entry.
OBJECT-TYPE    
  Integer32 1..65535  

csOrionAccessListStartAddress 1.3.6.1.4.1.3085.3.1.6.1.1.1.2
OBJECT-TYPE    
  IpAddress  

csOrionAccessListEndAddress 1.3.6.1.4.1.3085.3.1.6.1.1.1.3
OBJECT-TYPE    
  IpAddress  

csOrionAccessListPoolId 1.3.6.1.4.1.3085.3.1.6.1.1.1.4
The NAT Pool that is used when NAT is performed on packets matching this access list.
OBJECT-TYPE    
  Integer32  

csOrionAccessListStatus 1.3.6.1.4.1.3085.3.1.6.1.1.1.5
This object is used to create/delete entries in this table.
OBJECT-TYPE    
  RowStatus  

csOrionGenAclTable 1.3.6.1.4.1.3085.3.1.6.1.2
A list of Access List Entries. This is the table used by all the services (other than NAT) provided by Orion.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionGenAclEntry

csOrionGenAclEntry 1.3.6.1.4.1.3085.3.1.6.1.2.1
An entry containing filtering information used to classify packets.
OBJECT-TYPE    
  CsOrionGenAclEntry  

csOrionGenAclId 1.3.6.1.4.1.3085.3.1.6.1.2.1.1
An identifier for this Access List Entry.
OBJECT-TYPE    
  Integer32 1..65535  

csOrionGenAclSrcAddress 1.3.6.1.4.1.3085.3.1.6.1.2.1.2
OBJECT-TYPE    
  IpAddress  

csOrionGenAclSrcMask 1.3.6.1.4.1.3085.3.1.6.1.2.1.3
OBJECT-TYPE    
  IpAddress  

csOrionGenAclDstAddress 1.3.6.1.4.1.3085.3.1.6.1.2.1.4
OBJECT-TYPE    
  IpAddress  

csOrionGenAclDstMask 1.3.6.1.4.1.3085.3.1.6.1.2.1.5
OBJECT-TYPE    
  IpAddress  

csOrionGenAclProt 1.3.6.1.4.1.3085.3.1.6.1.2.1.6
The Protocol ID that a packet must contain to match this access list entry. The value -1 represents a wildcard for this General Access List parameter.
OBJECT-TYPE    
  Integer32  

csOrionGenAclTos 1.3.6.1.4.1.3085.3.1.6.1.2.1.7
The Type of Service that a packet must contain to match this access list entry. The value -1 represents a wildcard for this General Access List parameter.
OBJECT-TYPE    
  Integer32 -1..255  

csOrionGenAclStartSrcPort 1.3.6.1.4.1.3085.3.1.6.1.2.1.8
The beginning of a range of ports that a packet's source port must satisfy to match this access list entry. The value -1 represents a wildcard for this General Access List parameter.
OBJECT-TYPE    
  Integer32  

csOrionGenAclEndSrcPort 1.3.6.1.4.1.3085.3.1.6.1.2.1.9
The end of a range of ports that a packet's source port must satisfy to match this access list entry. The value -1 represents a wildcard for this General Access List parameter.
OBJECT-TYPE    
  Integer32  

csOrionGenAclStartDstPort 1.3.6.1.4.1.3085.3.1.6.1.2.1.10
The beginning of a range of ports that a packet's destination port must satisfy to match this access list entry. The value -1 represents a wildcard for this General Access List parameter.
OBJECT-TYPE    
  Integer32  

csOrionGenAclEndDstPort 1.3.6.1.4.1.3085.3.1.6.1.2.1.11
The end of a range of ports that a packet's destination port must satisfy to match this access list entry. The value -1 represents a wildcard for this General Access List parameter.
OBJECT-TYPE    
  Integer32  

csOrionGenAclStatus 1.3.6.1.4.1.3085.3.1.6.1.2.1.12
This object is used to create/delete entries in this table.
OBJECT-TYPE    
  RowStatus  

csOrionGenAclSrcAddressList 1.3.6.1.4.1.3085.3.1.6.1.2.1.13
The name of the address-list representing all source addresses For the GAL to be operational there should be at least one entry in the csOrionAddressListTable table with its csOrionAddressListName attribute being equal to the value of this attribute
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionGenAclDstAddressList 1.3.6.1.4.1.3085.3.1.6.1.2.1.14
The name of the address-list representing all destination addresses For the GAL to be operational there should be at least one entry in the csOrionAddressListTable table with its csOrionAddressListName attribute being equal to the value of this attribute
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionGenAclSrcPortList 1.3.6.1.4.1.3085.3.1.6.1.2.1.15
The name of the numeric-list representing all source ports. For the GAL to be operational there should be at least one entry in the csOrionNumericListTable table with its csOrionNumericListName attribute being equal to the value of this attribute.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionGenAclDstPortList 1.3.6.1.4.1.3085.3.1.6.1.2.1.16
The name of the numeric-list representing all source ports. An empty string represents a wildcard for this General Access List parameter. For the GAL to be operational there should be at least one entry in the csOrionNumericListTable table with its csOrionNumericListName attribute being equal to the value of this attribute.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionGenAclTableEnd 1.3.6.1.4.1.3085.3.1.6.1.3
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionAddressListTable 1.3.6.1.4.1.3085.3.1.6.1.4
This table stores named lists of IP addresses. An address is specified as an IP address and mask. Each table entry constitutes a single address.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionAddressListEntry

csOrionAddressListEntry 1.3.6.1.4.1.3085.3.1.6.1.4.1
Each entry contains information about a single address
OBJECT-TYPE    
  CsOrionAddressListEntry  

csOrionAddressListName 1.3.6.1.4.1.3085.3.1.6.1.4.1.1
The name of the address-list. A name shall only contain alphanumeric characters and hyphens.
OBJECT-TYPE    
  DisplayString SIZE(1..80)  

csOrionAddressListIpAddress 1.3.6.1.4.1.3085.3.1.6.1.4.1.2
The IP address for this entry.
OBJECT-TYPE    
  IpAddress  

csOrionAddressListMask 1.3.6.1.4.1.3085.3.1.6.1.4.1.3
The mask for this entry.
OBJECT-TYPE    
  IpAddress  

csOrionAddressListRowStatus 1.3.6.1.4.1.3085.3.1.6.1.4.1.4
The RowStatus object for this table. This is used to add/delete rows from this table.
OBJECT-TYPE    
  RowStatus  

csOrionAddressListTableEnd 1.3.6.1.4.1.3085.3.1.6.1.5
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionNumericListTable 1.3.6.1.4.1.3085.3.1.6.1.6
This table stores named lists of integers. A numeric-list is a named list that includes discreet integers or integer ranges. A numeric-list is typed: Initally a single type has been identified for using numeric-lists to represent port-lists.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionNumericListEntry

csOrionNumericListEntry 1.3.6.1.4.1.3085.3.1.6.1.6.1
Each entry specifies a single numeric specification: a discreet integer or a range of contiguous integers.
OBJECT-TYPE    
  CsOrionNumericListEntry  

csOrionNumericListType 1.3.6.1.4.1.3085.3.1.6.1.6.1.1
The match type for this entry: port: this numeric list represents a list of ports.
OBJECT-TYPE    
  INTEGER port(1)  

csOrionNumericListName 1.3.6.1.4.1.3085.3.1.6.1.6.1.2
The name of the numeric-list. A name shall contain only alphanumeric characters and hyphens (-).
OBJECT-TYPE    
  DisplayString SIZE(1..80)  

csOrionNumericListValue 1.3.6.1.4.1.3085.3.1.6.1.6.1.3
The integer for this entry. This value shall always be used.
OBJECT-TYPE    
  Integer32 0..65535  

csOrionNumericListUpperLimit 1.3.6.1.4.1.3085.3.1.6.1.6.1.4
The integer representing the upper boundary of a range. This attribute shall only be used when `includeRange'is specified in the csOrionNumericListMatchType attribute.
OBJECT-TYPE    
  Integer32 0..65535  

csOrionNumericListRowStatus 1.3.6.1.4.1.3085.3.1.6.1.6.1.5
The RowStatus object for this table. This is used to add/delete rows from this table.
OBJECT-TYPE    
  RowStatus  

csOrionAccessListInfoEnd 1.3.6.1.4.1.3085.3.1.6.1.7
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionFWInfo 1.3.6.1.4.1.3085.3.1.6.2
OBJECT IDENTIFIER    

csOrionFwConfig 1.3.6.1.4.1.3085.3.1.6.2.1
OBJECT IDENTIFIER    

csOrionFwGlobalConfig 1.3.6.1.4.1.3085.3.1.6.2.1.1
OBJECT IDENTIFIER    

csOrionFwInsideIfTable 1.3.6.1.4.1.3085.3.1.6.2.1.1.1
This contains the list of all the interfaces on the inside, or trusted, side of the firewall. NOTE: This table is no longer in use.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionFwInsideIfEntry

csOrionFwInsideIfEntry 1.3.6.1.4.1.3085.3.1.6.2.1.1.1.1
OBJECT-TYPE    
  CsOrionFwInsideIfEntry  

csOrionFwInsideIfIf 1.3.6.1.4.1.3085.3.1.6.2.1.1.1.1.1
The identifier of the 'inside' virtual interface.
OBJECT-TYPE    
  Integer32  

csOrionFwInsideIfAddr 1.3.6.1.4.1.3085.3.1.6.2.1.1.1.1.2
The Ip address of the 'inside' virtual interface.
OBJECT-TYPE    
  IpAddress  

csOrionFwInsideIfMask 1.3.6.1.4.1.3085.3.1.6.2.1.1.1.1.3
The Ip Mask of the 'inside' virtual interface.
OBJECT-TYPE    
  IpAddress  

csOrionFwInsideIfRowStatus 1.3.6.1.4.1.3085.3.1.6.2.1.1.1.1.4
The RowStatus object for this table.
OBJECT-TYPE    
  RowStatus  

csOrionFwDmzIfTable 1.3.6.1.4.1.3085.3.1.6.2.1.1.2
This contains the list of all the interfaces on the DmzIf side of the firewall. NOTE: This table is no longer in use.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionFwDmzIfEntry

csOrionFwDmzIfEntry 1.3.6.1.4.1.3085.3.1.6.2.1.1.2.1
OBJECT-TYPE    
  CsOrionFwDmzIfEntry  

csOrionFwDmzIf 1.3.6.1.4.1.3085.3.1.6.2.1.1.2.1.1
The identifier of a 'Dmz' virtual interface.
OBJECT-TYPE    
  Integer32  

csOrionFwDmzIfAddr 1.3.6.1.4.1.3085.3.1.6.2.1.1.2.1.2
The Ip address of a 'Dmz' virtual interface.
OBJECT-TYPE    
  IpAddress  

csOrionFwDmzIfMask 1.3.6.1.4.1.3085.3.1.6.2.1.1.2.1.3
The Ip Mask of a 'Dmz' virtual interface.
OBJECT-TYPE    
  IpAddress  

csOrionFwDmzIfRowStatus 1.3.6.1.4.1.3085.3.1.6.2.1.1.2.1.4
The RowStatus object for this table.
OBJECT-TYPE    
  RowStatus  

csOrionFwNwGroupTable 1.3.6.1.4.1.3085.3.1.6.2.1.1.3
This contains definitions of all the network groups referred to in other parts of the Firewall configuration. NOTE: This table is no longer in use.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionFwNwGroupEntry

csOrionFwNwGroupEntry 1.3.6.1.4.1.3085.3.1.6.2.1.1.3.1
OBJECT-TYPE    
  CsOrionFwNwGroupEntry  

csOrionFwNwGroupName 1.3.6.1.4.1.3085.3.1.6.2.1.1.3.1.1
The Name assigned to this Network Group.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

csOrionFwNwGroupAddr 1.3.6.1.4.1.3085.3.1.6.2.1.1.3.1.2
The Ip address of this member of this Network Group.
OBJECT-TYPE    
  IpAddress  

csOrionFwNwGroupMask 1.3.6.1.4.1.3085.3.1.6.2.1.1.3.1.3
The Ip Mask assigned to this member of this Network Group.
OBJECT-TYPE    
  IpAddress  

csOrionFwNwGroupInterface 1.3.6.1.4.1.3085.3.1.6.2.1.1.3.1.4
The Interface from which this member of this Network Group can be reached.
OBJECT-TYPE    
  INTEGER inside(1), outside(2), serviceNet(3), any(4)  

csOrionFwNwGroupRowStatus 1.3.6.1.4.1.3085.3.1.6.2.1.1.3.1.5
The RowStatus object for this table.
OBJECT-TYPE    
  RowStatus  

csOrionFwEvLogTable 1.3.6.1.4.1.3085.3.1.6.2.1.1.4
A table for Event Logging Control for FIREWALL.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionFwEvLogEntry

csOrionFwEvLogEntry 1.3.6.1.4.1.3085.3.1.6.2.1.1.4.1
Each entry contains the event logging level for the FIREWALL module on a virtual router.
OBJECT-TYPE    
  CsOrionFwEvLogEntry  

csOrionFwEvLogLevel 1.3.6.1.4.1.3085.3.1.6.2.1.1.4.1.1
This object is used to set the level of details for event logs for FIREWALL.
OBJECT-TYPE    
  EvLogLevel  

csOrionFwGenCfgTable 1.3.6.1.4.1.3085.3.1.6.2.1.1.5
A table for Configuration Control for FIREWALL.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionFwGenCfgEntry

csOrionFwGenCfgEntry 1.3.6.1.4.1.3085.3.1.6.2.1.1.5.1
Each entry contains the generic configuration for the FIREWALL module on a virtual router.
OBJECT-TYPE    
  CsOrionFwGenCfgEntry  

csOrionFwAccCfgFlag 1.3.6.1.4.1.3085.3.1.6.2.1.1.5.1.1
This object is used to set the access configuration flag for FIREWALL.
OBJECT-TYPE    
  INTEGER insync(1), outofsync(2), readytosync(3)  

csOrionFwProxyConfig 1.3.6.1.4.1.3085.3.1.6.2.1.2
OBJECT IDENTIFIER    

csOrionFwGenProxyConfig 1.3.6.1.4.1.3085.3.1.6.2.1.2.1
OBJECT IDENTIFIER    

csOrionFwGenProxyTable 1.3.6.1.4.1.3085.3.1.6.2.1.2.1.1
This table specifies various configuration parameters for each applicable proxy.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionFwGenProxyEntry

csOrionFwGenProxyEntry 1.3.6.1.4.1.3085.3.1.6.2.1.2.1.1.1
Each entry specifies a set of configuration parameters for a single proxy.
OBJECT-TYPE    
  CsOrionFwGenProxyEntry  

csOrionFwGenProxyId 1.3.6.1.4.1.3085.3.1.6.2.1.2.1.1.1.1
The proxy to which this entry applies.
OBJECT-TYPE    
  INTEGER ftp(1), http(2), telnet(3), smtp(4), pop3(5), plug(6), nntp(7), ldap(8), lnotes(9), rsh(10), aol(11), cs(12), netm(13), mssql(14)  

csOrionFwGenProxyChildLimit 1.3.6.1.4.1.3085.3.1.6.2.1.2.1.1.1.2
The maximum number of child processes that each of this proxy's daemon allows to run at a given time. If this option is set to zero, each daemon allows an unlimited number of child processes to run at any given time. Note, this is not applicable to the smtp proxy.
OBJECT-TYPE    
  Integer32 0..2147483647  

csOrionFwGenProxyStatus 1.3.6.1.4.1.3085.3.1.6.2.1.2.1.1.1.3
This is used to enable/disable a specific proxy.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

csOrionFwGenProxyActiveSessions 1.3.6.1.4.1.3085.3.1.6.2.1.2.1.1.1.4
This is the current number of active sessions for a specific proxy.
OBJECT-TYPE    
  Integer32  

csOrionFwDestTable 1.3.6.1.4.1.3085.3.1.6.2.1.2.1.2
This table specifies destination hosts and networks permissions for each applicable proxy. NOTE: This table has been replaced by csOrionFwAccessTable.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionFwDestEntry

csOrionFwDestEntry 1.3.6.1.4.1.3085.3.1.6.2.1.2.1.2.1
Each entry specifies a single destination host or network.
OBJECT-TYPE    
  CsOrionFwDestEntry  

csOrionFwDestProxy 1.3.6.1.4.1.3085.3.1.6.2.1.2.1.2.1.1
The proxy to which this entry applies.
OBJECT-TYPE    
  INTEGER ftp(1), http(2), telnet(3), smtp(4), pop3(5), plug(6), nntp(7), ldap(8), lnotes(9), mssql(10), aol(11), cs(12), netm(13)  

csOrionFwDestIndex 1.3.6.1.4.1.3085.3.1.6.2.1.2.1.2.1.2
The table index for this entry applies. This identifies the order in which the destination rules are applied.
OBJECT-TYPE    
  Integer32 1..2147483647  

csOrionFwDestAccess 1.3.6.1.4.1.3085.3.1.6.2.1.2.1.2.1.3
The access policy applied to the host or network identified in this entry.
OBJECT-TYPE    
  INTEGER permit(1), deny(2)  

csOrionFwDestAddr 1.3.6.1.4.1.3085.3.1.6.2.1.2.1.2.1.4
The Destination address for this entry.
OBJECT-TYPE    
  IpAddress  

csOrionFwDestMask 1.3.6.1.4.1.3085.3.1.6.2.1.2.1.2.1.5
The Destination address mask for this entry.
OBJECT-TYPE    
  IpAddress  

csOrionFwDestRowStatus 1.3.6.1.4.1.3085.3.1.6.2.1.2.1.2.1.6
The RowStatus object for this entry.
OBJECT-TYPE    
  RowStatus  

csOrionFwHostTable 1.3.6.1.4.1.3085.3.1.6.2.1.2.1.3
This table specifies source hosts and networks permissions for each applicable proxy. NOTE: This table has been replaces by csOrionFwAccessTable.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionFwHostEntry

csOrionFwHostEntry 1.3.6.1.4.1.3085.3.1.6.2.1.2.1.3.1
Each entry specifies a single destination host or network.
OBJECT-TYPE    
  CsOrionFwHostEntry  

csOrionFwHostProxy 1.3.6.1.4.1.3085.3.1.6.2.1.2.1.3.1.1
The proxy to which this entry applies.
OBJECT-TYPE    
  INTEGER ftp(1), http(2), telnet(3), smtp(4), pop3(5), plug(6), nntp(7), ldap(8), lnotes(9), mssql(10), aol(11), cs(12), netm(13)  

csOrionFwHostIndex 1.3.6.1.4.1.3085.3.1.6.2.1.2.1.3.1.2
The table index for this entry applies. This identifies the order in which the host rules are applied.
OBJECT-TYPE    
  Integer32 1..2147483647  

csOrionFwHostAccess 1.3.6.1.4.1.3085.3.1.6.2.1.2.1.3.1.3
The access policy applied to the host or network identified in this entry.
OBJECT-TYPE    
  INTEGER permit(1), deny(2)  

csOrionFwHostAddr 1.3.6.1.4.1.3085.3.1.6.2.1.2.1.3.1.4
The Source address for this entry.
OBJECT-TYPE    
  IpAddress  

csOrionFwHostMask 1.3.6.1.4.1.3085.3.1.6.2.1.2.1.3.1.5
The Source address mask for this entry.
OBJECT-TYPE    
  IpAddress  

csOrionFwHostRowStatus 1.3.6.1.4.1.3085.3.1.6.2.1.2.1.3.1.6
The RowStatus object for this entry.
OBJECT-TYPE    
  RowStatus  

csOrionFwAccessTable 1.3.6.1.4.1.3085.3.1.6.2.1.2.1.4
This table specifies the policy to apply for each new connection. A connection is identified by its source id, destination id, and protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionFwAccessEntry

csOrionFwAccessEntry 1.3.6.1.4.1.3085.3.1.6.2.1.2.1.4.1
Each entry specifies a single Access Policy.
OBJECT-TYPE    
  CsOrionFwAccessEntry  

csOrionFwAccessPriority 1.3.6.1.4.1.3085.3.1.6.2.1.2.1.4.1.1
The priority of this Access Table entry.
OBJECT-TYPE    
  Integer32 1..2147483647  

csOrionFwAccessSourceAddr 1.3.6.1.4.1.3085.3.1.6.2.1.2.1.4.1.2
The Address of the source of a proxy connection.
OBJECT-TYPE    
  IpAddress  

csOrionFwAccessSourceMask 1.3.6.1.4.1.3085.3.1.6.2.1.2.1.4.1.3
The Mask of the source of a proxy connection.
OBJECT-TYPE    
  IpAddress  

csOrionFwAccessDestAddr 1.3.6.1.4.1.3085.3.1.6.2.1.2.1.4.1.4
The Address of the destination of a proxy connection.
OBJECT-TYPE    
  IpAddress  

csOrionFwAccessDestMask 1.3.6.1.4.1.3085.3.1.6.2.1.2.1.4.1.5
The Mask of the destination of a proxy connection.
OBJECT-TYPE    
  IpAddress  

csOrionFwAccessAction 1.3.6.1.4.1.3085.3.1.6.2.1.2.1.4.1.6
The action to perform on connections that match the Source Id, Destination Id, and the Protocol.
OBJECT-TYPE    
  INTEGER permit(1), deny(2)  

csOrionFwAccessPortNumber 1.3.6.1.4.1.3085.3.1.6.2.1.2.1.4.1.7
This object identifies the port number this access entry will be applied. Together with the Source Id, and the Destination Id, this is used to identify a specific connection.
OBJECT-TYPE    
  Integer32 -1..65535  

csOrionFwAccessPolicy 1.3.6.1.4.1.3085.3.1.6.2.1.2.1.4.1.8
This is the name of the policy to be applied to any connection that matches the Source Id, Destination Id, and Protocol defined in this entry. The definition of the policy itself can be found in the corresponding protocol-specific Policy Table.
OBJECT-TYPE    
  DisplayString SIZE(0..64)  

csOrionFwAccessRowStatus 1.3.6.1.4.1.3085.3.1.6.2.1.2.1.4.1.9
A row status type for this Table entry.
OBJECT-TYPE    
  RowStatus  

csOrionFwAccessSourceAddrList 1.3.6.1.4.1.3085.3.1.6.2.1.2.1.4.1.10
The name of the address-list representing all source addresses. For the proxy access entry to be operational there should be at least one entry in the csOrionAddressListTable table with its csOrionAddressListName attribute equal to the value of this attribute.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionFwAccessDestAddrList 1.3.6.1.4.1.3085.3.1.6.2.1.2.1.4.1.11
The name of the address-list representing all destination addresses. For the proxy access entry to be operational there should be at least one entry in the csOrionAddressListTable table with its csOrionAddressListName attribute equal to the value of this attribute.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionFwAccessDestPortList 1.3.6.1.4.1.3085.3.1.6.2.1.2.1.4.1.12
The name of the port-list representing all destination addresses. For the proxy access entry to be operational there should be at least one entry in the csOrionAddressListTable table with its csOrionAddressListName attribute equal to the value of this attribute.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionFwProxyDaemonTable 1.3.6.1.4.1.3085.3.1.6.2.1.2.1.5
This is a list of daemon ports along with the protocol that uses it.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionFwProxyDaemonEntry

csOrionFwProxyDaemonEntry 1.3.6.1.4.1.3085.3.1.6.2.1.2.1.5.1
Each entry specifies a daemon port and the protocol.
OBJECT-TYPE    
  CsOrionFwProxyDaemonEntry  

csOrionFwProxyDaemonPortNumber 1.3.6.1.4.1.3085.3.1.6.2.1.2.1.5.1.1
The port number of this daemon.
OBJECT-TYPE    
  Integer32 1..65535  

csOrionFwProxyDaemonProtocol 1.3.6.1.4.1.3085.3.1.6.2.1.2.1.5.1.2
The protocol that uses this daemon. This is a mandatory during creation of entry.
OBJECT-TYPE    
  INTEGER ftp(1), http(2), telnet(3), smtp(4), pop3(5), plug(6), nntp(7), ldap(8), lnotes(9), rsh(10), aol(11), cs(12), netm(13), mssql(14)  

csOrionFwProxyDaemonRowStatus 1.3.6.1.4.1.3085.3.1.6.2.1.2.1.5.1.3
The RowStatus object for this entry.
OBJECT-TYPE    
  RowStatus  

csOrionFwGenProxyConfigEnd 1.3.6.1.4.1.3085.3.1.6.2.1.2.1.6
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionFwFtpConfig 1.3.6.1.4.1.3085.3.1.6.2.1.2.2
OBJECT IDENTIFIER    

csOrionFwFtpConfigTable 1.3.6.1.4.1.3085.3.1.6.2.1.2.2.1
This table specifies Ftp functions that are permitted or denied. NOTE: This table has been replaced by csOrionFwFtpPolicyTable.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionFwFtpConfigEntry

csOrionFwFtpConfigEntry 1.3.6.1.4.1.3085.3.1.6.2.1.2.2.1.1
Each entry specifies a set of FTP proxy configuration parameters for a single firewall instance.
OBJECT-TYPE    
  CsOrionFwFtpConfigEntry  

csOrionFwFtpLog 1.3.6.1.4.1.3085.3.1.6.2.1.2.2.1.1.1
The ftp functions that are logged by this ftp proxy. It is a bitmap where each bit represents a function. The following is the bit assingment, abor (0), acct (1), allo (2), appe (3), cdup (4), cwd (5), dele (6), help (7), list (8), mkd (9), mode (10), nlst (11), noop (12), pass (13), pasv (14), port (15), pwd (16), quit (17), retr (18), rmd (19), rnfr (20), rnto (21), stor (22), stou (23), stru (24), type (25), user (26), xcup (27), xcwd (28), xmkd (29), xpwd (30), xrmd (31)
OBJECT-TYPE    
  Unsigned32  

csOrionFwFtpFunctionIds 1.3.6.1.4.1.3085.3.1.6.2.1.2.2.1.1.2
A set of specific ftp functions. It is a bitmap where each bit represents a specific function that will be suported by this proxy. The following is the bit assignment, abor (0), acct (1), allo (2), appe (3), cdup (4), cwd (5), dele (6), help (7), list (8), mkd (9), mode (10), nlst (11), noop (12), pass (13), pasv (14), port (15), pwd (16), quit (17), retr (18), rmd (19), rnfr (20), rnto (21), stor (22), stou (23), stru (24), type (25), user (26), xcup (27), xcwd (28), xmkd (29), xpwd (30), xrmd (31)
OBJECT-TYPE    
  Unsigned32  

csOrionFwFtpPolicyTable 1.3.6.1.4.1.3085.3.1.6.2.1.2.2.2
This table specifies individual Ftp Policies. The Fw Access Table identifies the specific policies to apply to specific Ftp connections.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionFwFtpPolicyEntry

csOrionFwFtpPolicyEntry 1.3.6.1.4.1.3085.3.1.6.2.1.2.2.2.1
Each entry specifies a single FtpPolicy Policy.
OBJECT-TYPE    
  CsOrionFwFtpPolicyEntry  

csOrionFwFtpPolicyName 1.3.6.1.4.1.3085.3.1.6.2.1.2.2.2.1.1
The name used to identify this Ftp Policy entry.
OBJECT-TYPE    
  DisplayString SIZE(1..64)  

csOrionFwFtpPolicyAuthenticate 1.3.6.1.4.1.3085.3.1.6.2.1.2.2.2.1.2
This flag indicates if additional user authentication is required.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOrionFwFtpPolicyTimeout 1.3.6.1.4.1.3085.3.1.6.2.1.2.2.2.1.3
The number of seconds the proxy is idle before disconnecting.
OBJECT-TYPE    
  Integer32 1..2147483647  

csOrionFwFtpPolicyHandoffAddr 1.3.6.1.4.1.3085.3.1.6.2.1.2.2.2.1.4
The host to which this proxy hands the proxy request.
OBJECT-TYPE    
  DisplayString SIZE(0..128)  

csOrionFwFtpPolicyLog 1.3.6.1.4.1.3085.3.1.6.2.1.2.2.2.1.5
The ftp functions that are logged by this ftp proxy. It is a bitmap where each bit represents a function. The following is the bit assingment, abor (0), acct (1), allo (2), appe (3), cdup (4), cwd (5), dele (6), help (7), list (8), mkd (9), mode (10), nlst (11), noop (12), pass (13), pasv (14), port (15), pwd (16), quit (17), rein (18), rest (19), retr (20), rmd (21), rnfr (22), rnto (23), site (24), size (25), smnt (26), stat (27), stor (28), stou (29), stru (30), syst (31), type (32), user (33), xcup (34), xcwd (35), xmkd (36), xpwd (37), xrmd (38)
OBJECT-TYPE    
  OCTET STRING SIZE(5)  

csOrionFwFtpPolicyFunctionIds 1.3.6.1.4.1.3085.3.1.6.2.1.2.2.2.1.6
A set of specific ftp functions. It is a bitmap where each bit represents a specific function that will be suported by this proxy. The following is the bit assignment, abor (0), acct (1), allo (2), appe (3), cdup (4), cwd (5), dele (6), help (7), list (8), mkd (9), mode (10), nlst (11), noop (12), pass (13), pasv (14), port (15), pwd (16), quit (17), rein (18), rest (19), retr (20), rmd (21), rnfr (22), rnto (23), site (24), size (25), smnt (26), stat (27), stor (28), stou (29), stru (30), syst (31), type (32), user (33), xcup (34), xcwd (35), xmkd (36), xpwd (37), xrmd (38)
OBJECT-TYPE    
  OCTET STRING SIZE(5)  

csOrionFwFtpPolicyDynamicPacketFilter 1.3.6.1.4.1.3085.3.1.6.2.1.2.2.2.1.7
When enabled, allows the ftp proxy to, create dynamic packet filter for data transfer (layer 2 forwarding)
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOrionFwFtpPolicyRowStatus 1.3.6.1.4.1.3085.3.1.6.2.1.2.2.2.1.8
The Row Status object for this table.
OBJECT-TYPE    
  RowStatus  

csOrionFwFtpAuthTable 1.3.6.1.4.1.3085.3.1.6.2.1.2.2.3
This table specifies the authentication configuration for the Ftp Proxy.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionFwFtpAuthEntry

csOrionFwFtpAuthEntry 1.3.6.1.4.1.3085.3.1.6.2.1.2.2.3.1
Each entry specifies a authentication configuration.
OBJECT-TYPE    
  CsOrionFwFtpAuthEntry  

csOrionFwFtpAuthStatus 1.3.6.1.4.1.3085.3.1.6.2.1.2.2.3.1.1
The current status of ftp authentication mode.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOrionFwFtpAuthServiceType 1.3.6.1.4.1.3085.3.1.6.2.1.2.2.3.1.2
The service type used for authentication.
OBJECT-TYPE    
  INTEGER none(1), local(2), radius(3), ldap(4)  

csOrionFwFtpAuthMechanism 1.3.6.1.4.1.3085.3.1.6.2.1.2.2.3.1.3
The machanism used for authentication.
OBJECT-TYPE    
  INTEGER none(1), chap(2), pap(3), password(4)  

csOrionFwFtpAuthServers 1.3.6.1.4.1.3085.3.1.6.2.1.2.2.3.1.4
The authentication server address used by proxy to connect to.
OBJECT-TYPE    
  DisplayString SIZE(0..128)  

csOrionFwFtpAuthNonTransparentAuth 1.3.6.1.4.1.3085.3.1.6.2.1.2.2.3.1.5
The configuration for non-transparent mode.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOrionFwFtpAuthPasswdTimeout 1.3.6.1.4.1.3085.3.1.6.2.1.2.2.3.1.6
The password inactive timeout.
OBJECT-TYPE    
  Integer32 0..2147483647  

csOrionFwFtpAuthPerUserAuthFilter 1.3.6.1.4.1.3085.3.1.6.2.1.2.2.3.1.7
The ldap filter name on per user base.
OBJECT-TYPE    
  DisplayString SIZE(0..128)  

csOrionFwFtpConfigEnd 1.3.6.1.4.1.3085.3.1.6.2.1.2.2.4
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionFwHttpConfig 1.3.6.1.4.1.3085.3.1.6.2.1.2.3
OBJECT IDENTIFIER    

csOrionFwHttpConfigTable 1.3.6.1.4.1.3085.3.1.6.2.1.2.3.1
This table specifies a set of Http proxy configuration parameters. NOTE: This table has been replaced by csOrionFwHttpPolicyTable.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionFwHttpConfigEntry

csOrionFwHttpConfigEntry 1.3.6.1.4.1.3085.3.1.6.2.1.2.3.1.1
Each entry specifies a set of Http proxy configuration parameters for a single Http instance.
OBJECT-TYPE    
  CsOrionFwHttpConfigEntry  

csOrionFwHttpLog 1.3.6.1.4.1.3085.3.1.6.2.1.2.3.1.1.1
The http functions that are logged by the http proxy. It is a bitmap where each bit represents an http function that can be logged. The following is the bit assignment, binary (0), dir (1), exec (2), ftp (3), httpreq (4), http (5), read (6), retr (7), stor (8), text (9), type (10), write (11)
OBJECT-TYPE    
  Unsigned32  

csOrionFwHttpOurname 1.3.6.1.4.1.3085.3.1.6.2.1.2.3.1.1.2
The host and domain name that the HTTP proxy uses when putting its own name into non-transparent forarded URL's.
OBJECT-TYPE    
  DisplayString SIZE(0..128)  

csOrionFwHttpFeatureIds 1.3.6.1.4.1.3085.3.1.6.2.1.2.3.1.1.3
A set of specific http features. It is a bitmap where each bit represents an http feature supported by this proxy. The following is the bit assignment, activex (0), frames (1), java (2), script (3)
OBJECT-TYPE    
  Unsigned32  

csOrionFwHttpFunctionIds 1.3.6.1.4.1.3085.3.1.6.2.1.2.3.1.1.4
A set of specific http functions. It is a bitmap where each bit represents an http function supported by this proxy. The following is the bit assignment, binary (0), dir (1), exec (2), ftp (3), httpreq (4), http (5), read (6), retr (7), stor (8), text (9), type (10), write (11)
OBJECT-TYPE    
  Unsigned32  

csOrionFwHttpHeaderIds 1.3.6.1.4.1.3085.3.1.6.2.1.2.3.1.1.5
A set of specific http headers. It is a bitmap where each bit represents an http header supported by this proxy. The following is the bit assignment, accept-charset (0), accept-encoding (1), accept-language (2), allow (3), content-encoding (4), content-language (5), date (6), expires (7), from (8), if-modified-since (9), last-modified (10), link (11), mime-version (12), pragma (13), referer (14), retry-after (15), server (16), title (17), uri (18), user-agent (19), www-authenticate (20)
OBJECT-TYPE    
  Unsigned32  

csOrionFwHttpPolicyTable 1.3.6.1.4.1.3085.3.1.6.2.1.2.3.2
This table specifies individual Http Policies. The Fw Access Table identifies the specific policies to apply to specific Http connections.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionFwHttpPolicyEntry

csOrionFwHttpPolicyEntry 1.3.6.1.4.1.3085.3.1.6.2.1.2.3.2.1
Each entry specifies a single HttpPolicy Policy.
OBJECT-TYPE    
  CsOrionFwHttpPolicyEntry  

csOrionFwHttpPolicyName 1.3.6.1.4.1.3085.3.1.6.2.1.2.3.2.1.1
The name used to identify this Http Policy entry.
OBJECT-TYPE    
  DisplayString SIZE(1..64)  

csOrionFwHttpPolicyAuthenticate 1.3.6.1.4.1.3085.3.1.6.2.1.2.3.2.1.2
This flag indicates if additional user authentication is required.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOrionFwHttpPolicyTimeout 1.3.6.1.4.1.3085.3.1.6.2.1.2.3.2.1.3
The number of seconds the proxy is idle before disconnecting.
OBJECT-TYPE    
  Integer32 1..2147483647  

csOrionFwHttpPolicyHandoffAddr 1.3.6.1.4.1.3085.3.1.6.2.1.2.3.2.1.4
The host to which this proxy hands the proxy request.
OBJECT-TYPE    
  DisplayString SIZE(0..128)  

csOrionFwHttpPolicyOurname 1.3.6.1.4.1.3085.3.1.6.2.1.2.3.2.1.5
The host and domain name that the HTTP proxy uses when putting its own name into non-transparent forarded URL's.
OBJECT-TYPE    
  DisplayString SIZE(0..128)  

csOrionFwHttpPolicyLog 1.3.6.1.4.1.3085.3.1.6.2.1.2.3.2.1.6
The Http functions that are logged by this Http proxy. It is a bitmap where each bit represents a function. By default, all functions are not logged. The following is the bit assignment, bin (0), -- binary dir (1), -- directory exec (2), -- execute ftp (3), -- ftp hreq (4), -- http request http (5), -- http read (6), -- read retr (7), -- retrieve stor (8), -- store text (9), -- text type (10), -- type wrte (11) -- write
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

csOrionFwHttpPolicyFunctionIds 1.3.6.1.4.1.3085.3.1.6.2.1.2.3.2.1.7
A set of specific http functions. It is a bitmap where each bit represents a specific function that will be suported by this proxy. The following is the bit assignment, bin (0), -- binary dir (1), -- directory exec (2), -- execute ftp (3), -- ftp hreq (4), -- http request http (5), -- http read (6), -- read retr (7), -- retrieve stor (8), -- store text (9), -- text type (10), -- type wrte (11) -- write
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

csOrionFwHttpPolicyFeatures 1.3.6.1.4.1.3085.3.1.6.2.1.2.3.2.1.8
A set of specific http features. It is a bitmap where each bit represents a specific features that will be suported by this proxy. By default, all features are allowed. The following is the bit assignment, actx (0), -- activex fram (1), -- frames htm2 (2), -- html 2 java (3), -- java kanj (4), -- kanji legk (5), -- legacy kanji mpf (6), -- multi part form scrp (7), -- java script
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

csOrionFwHttpPolicyHeader 1.3.6.1.4.1.3085.3.1.6.2.1.2.3.2.1.9
A set of specific http headers. It is a bitmap where each bit represents a specific header that will be suported by this proxy. By default, all http headers are supported. The following is the bit assignment, achr (0), -- accept charset aenc (1), -- accept encoding alng (2), -- accept language alow (3), -- allow cenc (4), -- content encoding clng (5), -- content language date (6), -- date exp (7), -- expires from (8), -- from imod (9), -- if modified since lmod (10), -- last modified lnk (11), -- link mime (12), -- mime version prgm (13), -- pragma refr (14), -- referer reta (15), -- retry after serv (16), -- server titl (17), -- title uri (18), -- uniform resource locator user (19), -- user agent www (20), -- www authenticate
OBJECT-TYPE    
  OCTET STRING SIZE(3)  

csOrionFwHttpPolicyRowStatus 1.3.6.1.4.1.3085.3.1.6.2.1.2.3.2.1.10
The Row Status object for this table.
OBJECT-TYPE    
  RowStatus  

csOrionFwHttpPortTable 1.3.6.1.4.1.3085.3.1.6.2.1.2.3.3
This table defines the specific ports that a particular HTTP policy will permit or deny.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionFwHttpPortEntry

csOrionFwHttpPortEntry 1.3.6.1.4.1.3085.3.1.6.2.1.2.3.3.1
Each entry specifies a single Http Policy.
OBJECT-TYPE    
  CsOrionFwHttpPortEntry  

csOrionFwHttpPortPolicyName 1.3.6.1.4.1.3085.3.1.6.2.1.2.3.3.1.1
The policy name this port access is applied to.
OBJECT-TYPE    
  DisplayString SIZE(1..64)  

csOrionFwHttpPortNumber 1.3.6.1.4.1.3085.3.1.6.2.1.2.3.3.1.2
The port number.
OBJECT-TYPE    
  Integer32 1..65535  

csOrionFwHttpPortAccess 1.3.6.1.4.1.3085.3.1.6.2.1.2.3.3.1.3
The access to this port number.
OBJECT-TYPE    
  INTEGER permit(1), deny(2)  

csOrionFwHttpPortRowStatus 1.3.6.1.4.1.3085.3.1.6.2.1.2.3.3.1.4
The RowStatus object for this entry.
OBJECT-TYPE    
  RowStatus  

csOrionFwHttpAuthTable 1.3.6.1.4.1.3085.3.1.6.2.1.2.3.4
This table specifies the authentication configuration for the Ftp Proxy.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionFwHttpAuthEntry

csOrionFwHttpAuthEntry 1.3.6.1.4.1.3085.3.1.6.2.1.2.3.4.1
Each entry specifies a authentication configuration.
OBJECT-TYPE    
  CsOrionFwHttpAuthEntry  

csOrionFwHttpAuthStatus 1.3.6.1.4.1.3085.3.1.6.2.1.2.3.4.1.1
The current status of http authentication mode.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOrionFwHttpAuthServiceType 1.3.6.1.4.1.3085.3.1.6.2.1.2.3.4.1.2
The service type used for authentication.
OBJECT-TYPE    
  INTEGER none(1), local(2), radius(3), ldap(4)  

csOrionFwHttpAuthMechanism 1.3.6.1.4.1.3085.3.1.6.2.1.2.3.4.1.3
The machanism used for authentication.
OBJECT-TYPE    
  INTEGER none(1), chap(2), pap(3), password(4)  

csOrionFwHttpAuthServers 1.3.6.1.4.1.3085.3.1.6.2.1.2.3.4.1.4
The authentication server address used by proxy to connect to.
OBJECT-TYPE    
  DisplayString SIZE(0..128)  

csOrionFwHttpAuthNonTransparentAuth 1.3.6.1.4.1.3085.3.1.6.2.1.2.3.4.1.5
The configuration for non-transparent mode.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOrionFwHttpAuthPasswdTimeout 1.3.6.1.4.1.3085.3.1.6.2.1.2.3.4.1.6
The password inactive timeout.
OBJECT-TYPE    
  Integer32 0..2147483647  

csOrionFwHttpAuthPerUserAuthFilter 1.3.6.1.4.1.3085.3.1.6.2.1.2.3.4.1.7
The ldap filter name on per user base.
OBJECT-TYPE    
  DisplayString SIZE(0..128)  

csOrionFwHttpConfigEnd 1.3.6.1.4.1.3085.3.1.6.2.1.2.3.5
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionFwSmtpConfig 1.3.6.1.4.1.3085.3.1.6.2.1.2.4
OBJECT IDENTIFIER    

csOrionFwSmtpConfigTable 1.3.6.1.4.1.3085.3.1.6.2.1.2.4.1
This table specifies a set of Smtp proxy configuration parameters. NOTE: This table has been replaced by csOrionFwSmtpPolicyTable.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionFwSmtpConfigEntry

csOrionFwSmtpConfigEntry 1.3.6.1.4.1.3085.3.1.6.2.1.2.4.1.1
Each entry specifies a set of Smtp proxy configuration parameters for a single Smtp instance.
OBJECT-TYPE    
  CsOrionFwSmtpConfigEntry  

csOrionFwSmtpBadAdmin 1.3.6.1.4.1.3085.3.1.6.2.1.2.4.1.1.1
The username to which the smapd server forwards mail that it cannot deliver.
OBJECT-TYPE    
  DisplayString  

csOrionFwSmtpBadDir 1.3.6.1.4.1.3085.3.1.6.2.1.2.4.1.1.2
The directory in which the smapd server places any spooled mail that it cannot deliver.
OBJECT-TYPE    
  DisplayString  

csOrionFwSmtpMaxChildren 1.3.6.1.4.1.3085.3.1.6.2.1.2.4.1.1.3
The maximum number of child processes the smapd server can fork to handle mail.
OBJECT-TYPE    
  Integer32 1..2147483647  

csOrionFwSmtpWakeup 1.3.6.1.4.1.3085.3.1.6.2.1.2.4.1.1.4
The number of seconds the smapd server sleeps between scans of spool directory for undelivered mail.
OBJECT-TYPE    
  Integer32 1..2147483647  

csOrionFwSmtpInternalMailHub 1.3.6.1.4.1.3085.3.1.6.2.1.2.4.1.1.5
This object identifies the Internal Mail Hub using either an IP address or a domain name.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionFwSmtpLocalDomain 1.3.6.1.4.1.3085.3.1.6.2.1.2.4.1.1.6
Local domain that the firewall is serving -- IP address or domain name.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionFwSmtpLogging 1.3.6.1.4.1.3085.3.1.6.2.1.2.4.1.1.7
Specifies if normal or no logging is to be done on SMTP proxy.
OBJECT-TYPE    
  INTEGER none(1), normal(2)  

csOrionFwSmtpLogRelay 1.3.6.1.4.1.3085.3.1.6.2.1.2.4.1.1.8
Logs the rejection of mail relay attempts.
OBJECT-TYPE    
  INTEGER none(1), reject(2)  

csOrionFwSmtpLogSpam 1.3.6.1.4.1.3085.3.1.6.2.1.2.4.1.1.9
Logs the rejection of mail spam attempts.
OBJECT-TYPE    
  INTEGER none(1), reject(2)  

csOrionFwSmtpMaxBytes 1.3.6.1.4.1.3085.3.1.6.2.1.2.4.1.1.10
Maximum number of bytes of the mail content. The value 0 indicates no maximum.
OBJECT-TYPE    
  Integer32 0..2147483647  

csOrionFwSmtpMaxRecip 1.3.6.1.4.1.3085.3.1.6.2.1.2.4.1.1.11
The maximum number of recipients of the mail message. The value 0 indicates no maximum.
OBJECT-TYPE    
  Integer32 1..2147483647  

csOrionFwSmtpSpamReply 1.3.6.1.4.1.3085.3.1.6.2.1.2.4.1.1.12
This object controls the type of response the SMTP proxy makes back to the connected SMTP server when nuisance mail is detected: 554 - Explicitly reject and notify the connected server. 250 - Acknowledge acceptance of the message but drop it at the firewall.
OBJECT-TYPE    
  Integer32  

csOrionFwSmtpRelayReply 1.3.6.1.4.1.3085.3.1.6.2.1.2.4.1.1.13
This object controls the type of response the SMTP proxy makes back to the connected SMTP server when unauthorized mail relaying is detected: 550 - Explicitly reject and notify the connected server. 250 - Acknowledge acceptance of the message but drop it at the firewall.
OBJECT-TYPE    
  Integer32  

csOrionFwSmtpPolicyTable 1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2
This table specifies individual SMTP Policies. The Fw Access Table identifies the specific policies to apply to specific SMTP connections.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionFwSmtpPolicyEntry

csOrionFwSmtpPolicyEntry 1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2.1
Each entry specifies a single SmtpPolicy Policy.
OBJECT-TYPE    
  CsOrionFwSmtpPolicyEntry  

csOrionFwSmtpPolicyName 1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2.1.1
The name used to identify this Smtp Policy entry.
OBJECT-TYPE    
  DisplayString SIZE(1..64)  

csOrionFwSmtpPolicyTimeout 1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2.1.2
The timeout limit on idle connection in seconds.
OBJECT-TYPE    
  Integer32 1..2147483647  

csOrionFwSmtpPolicyInternalMailHub 1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2.1.3
The default internal mail hub for email to go to if the destination mail for the protected domain(see ..).
OBJECT-TYPE    
  DisplayString SIZE(1..128)  

csOrionFwSmtpPolicyBadEmailAdmin 1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2.1.4
The administrator that will receive email notification of any bad email.
OBJECT-TYPE    
  DisplayString SIZE(1..64)  

csOrionFwSmtpPolicyLocalDomain 1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2.1.5
The domain currently being protected by the firewall.
OBJECT-TYPE    
  DisplayString SIZE(1..64)  

csOrionFwSmtpPolicyMaxBytes 1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2.1.6
This is the maximum size (in bytes) of the mail body that the proxy will accept. Any data beyond the maximum size is dropped. NOTE: zero (0) means no limit restriction.
OBJECT-TYPE    
  Integer32 0..2147483647  

csOrionFwSmtpPolicyMaxRecipients 1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2.1.7
This is the maximum recipients that the proxy will allow at any given email. NOTE: zero (0) means no limit restriction.
OBJECT-TYPE    
  Integer32 0..2147483647  

csOrionFwSmtpPolicyLogging 1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2.1.8
Indicates if normal or no logging is to be done.
OBJECT-TYPE    
  INTEGER none(1), normal(2)  

csOrionFwSmtpPolicyLogRelay 1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2.1.9
Indicates if normal or no logging is to be done.
OBJECT-TYPE    
  INTEGER none(1), reject(2)  

csOrionFwSmtpPolicyRelayReply 1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2.1.10
This object controls the type of response the SMTP proxy makes back to the connected SMTP server when unauthorized mail relaying is detected.
OBJECT-TYPE    
  INTEGER ok(250), unavail(550)  

csOrionFwSmtpPolicyLogSpam 1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2.1.11
Indicates if normal or no logging is to be done.
OBJECT-TYPE    
  INTEGER none(1), reject(2)  

csOrionFwSmtpPolicySpamReply 1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2.1.12
This object controls the type of response the SMTP proxy makes back to the connected SMTP server when unauthorized mail relaying is detected.
OBJECT-TYPE    
  INTEGER ok(250), failed(554)  

csOrionFwSmtpPolicyRowStatus 1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2.1.13
Row status for this entry.
OBJECT-TYPE    
  RowStatus  

csOrionFwSmtpPolicyMimeCheck 1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2.1.14
This object controls whether the proxy attempts to validate the syntax of all MIME attachments within the email message
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOrionFwSmtpRelayTable 1.3.6.1.4.1.3085.3.1.6.2.1.2.4.3
This table defines the specific email relay that a particular SMTP policy will permit or deny.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionFwSmtpRelayEntry

csOrionFwSmtpRelayEntry 1.3.6.1.4.1.3085.3.1.6.2.1.2.4.3.1
Each entry specifies a single email relay.
OBJECT-TYPE    
  CsOrionFwSmtpRelayEntry  

csOrionFwSmtpRelayPolicyName 1.3.6.1.4.1.3085.3.1.6.2.1.2.4.3.1.1
The policy name this email relay access is applied to.
OBJECT-TYPE    
  DisplayString SIZE(1..64)  

csOrionFwSmtpRelaySource 1.3.6.1.4.1.3085.3.1.6.2.1.2.4.3.1.2
The source id (IP address, IP address with mask, network IP address, network IP address with mask) of the email relay.
OBJECT-TYPE    
  DisplayString SIZE(1..128)  

csOrionFwSmtpRelayAccess 1.3.6.1.4.1.3085.3.1.6.2.1.2.4.3.1.3
The access to this email relay.
OBJECT-TYPE    
  INTEGER permit(1), deny(2)  

csOrionFwSmtpRelayRowStatus 1.3.6.1.4.1.3085.3.1.6.2.1.2.4.3.1.4
The row status object for this entry.
OBJECT-TYPE    
  RowStatus  

csOrionFwSmtpSpamTable 1.3.6.1.4.1.3085.3.1.6.2.1.2.4.4
This table defines the specific spam email that a particular SMTP policy will permit or deny.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionFwSmtpSpamEntry

csOrionFwSmtpSpamEntry 1.3.6.1.4.1.3085.3.1.6.2.1.2.4.4.1
Each entry specifies a single spamm email.
OBJECT-TYPE    
  CsOrionFwSmtpSpamEntry  

csOrionFwSmtpSpamPolicyName 1.3.6.1.4.1.3085.3.1.6.2.1.2.4.4.1.1
The policy name this spam email access is applied to.
OBJECT-TYPE    
  DisplayString SIZE(1..64)  

csOrionFwSmtpSpamSource 1.3.6.1.4.1.3085.3.1.6.2.1.2.4.4.1.2
The source id (IP address, IP address with mask, network IP address, network IP address with mask) of the spam email.
OBJECT-TYPE    
  DisplayString SIZE(1..128)  

csOrionFwSmtpSpamAccess 1.3.6.1.4.1.3085.3.1.6.2.1.2.4.4.1.3
The access to this spam email.
OBJECT-TYPE    
  INTEGER permit(1), deny(2)  

csOrionFwSmtpSpamRowStatus 1.3.6.1.4.1.3085.3.1.6.2.1.2.4.4.1.4
The row status object for this entry.
OBJECT-TYPE    
  RowStatus  

csOrionFwSmtpConfigEnd 1.3.6.1.4.1.3085.3.1.6.2.1.2.4.5
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionFwTelnetConfig 1.3.6.1.4.1.3085.3.1.6.2.1.2.5
OBJECT IDENTIFIER    

csOrionFwTelnetPolicyTable 1.3.6.1.4.1.3085.3.1.6.2.1.2.5.1
This table specifies individual Telnet Policies. The Fw Access Table identifies the specific policies to apply to specific Telnet connections.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionFwTelnetPolicyEntry

csOrionFwTelnetPolicyEntry 1.3.6.1.4.1.3085.3.1.6.2.1.2.5.1.1
Each entry specifies a single Telnet Policy.
OBJECT-TYPE    
  CsOrionFwTelnetPolicyEntry  

csOrionFwTelnetPolicyName 1.3.6.1.4.1.3085.3.1.6.2.1.2.5.1.1.1
The name used to identify this Telnet Policy entry.
OBJECT-TYPE    
  DisplayString SIZE(1..64)  

csOrionFwTelnetPolicyAuthenticate 1.3.6.1.4.1.3085.3.1.6.2.1.2.5.1.1.2
This flag indicates if additional user authentication is required.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOrionFwTelnetPolicyTimeout 1.3.6.1.4.1.3085.3.1.6.2.1.2.5.1.1.3
The number of seconds the proxy is idle before disconnecting.
OBJECT-TYPE    
  Integer32 1..2147483647  

csOrionFwTelnetPolicyPasswordChange 1.3.6.1.4.1.3085.3.1.6.2.1.2.5.1.1.4
This object indicates whether the user is allowed to change the password.
OBJECT-TYPE    
  INTEGER allowed(1), notAllowed(2)  

csOrionFwTelnetPolicyPrompt 1.3.6.1.4.1.3085.3.1.6.2.1.2.5.1.1.5
The command line promt the proxy should use for telnet sessions.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

csOrionFwTelnetPolicyXGateway 1.3.6.1.4.1.3085.3.1.6.2.1.2.5.1.1.6
This object indicates whether or not the client is allowed to use X proxy.
OBJECT-TYPE    
  INTEGER allowed(1), notAllowed(2)  

csOrionFwTelnetPolicyRowStatus 1.3.6.1.4.1.3085.3.1.6.2.1.2.5.1.1.7
The Row Status object for this table.
OBJECT-TYPE    
  RowStatus  

csOrionFwTelnetAuthTable 1.3.6.1.4.1.3085.3.1.6.2.1.2.5.2
This table specifies the authentication configuration for the Ftp Proxy.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionFwTelnetAuthEntry

csOrionFwTelnetAuthEntry 1.3.6.1.4.1.3085.3.1.6.2.1.2.5.2.1
Each entry specifies a authentication configuration.
OBJECT-TYPE    
  CsOrionFwTelnetAuthEntry  

csOrionFwTelnetAuthStatus 1.3.6.1.4.1.3085.3.1.6.2.1.2.5.2.1.1
The current status of telnet authentication mode.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOrionFwTelnetAuthServiceType 1.3.6.1.4.1.3085.3.1.6.2.1.2.5.2.1.2
The service type used for authentication.
OBJECT-TYPE    
  INTEGER none(1), local(2), radius(3), ldap(4)  

csOrionFwTelnetAuthMechanism 1.3.6.1.4.1.3085.3.1.6.2.1.2.5.2.1.3
The machanism used for authentication.
OBJECT-TYPE    
  INTEGER none(1), chap(2), pap(3), password(4)  

csOrionFwTelnetAuthServers 1.3.6.1.4.1.3085.3.1.6.2.1.2.5.2.1.4
The authentication server address used by proxy to connect to.
OBJECT-TYPE    
  DisplayString SIZE(0..128)  

csOrionFwTelnetAuthNonTransparentAuth 1.3.6.1.4.1.3085.3.1.6.2.1.2.5.2.1.5
The configuration for non-transparent mode.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOrionFwTelnetAuthPasswdTimeout 1.3.6.1.4.1.3085.3.1.6.2.1.2.5.2.1.6
The password inactive timeout.
OBJECT-TYPE    
  Integer32 0..2147483647  

csOrionFwTelnetAuthPerUserAuthFilter 1.3.6.1.4.1.3085.3.1.6.2.1.2.5.2.1.7
The ldap filter name on per user base.
OBJECT-TYPE    
  DisplayString SIZE(0..128)  

csOrionFwTelnetConfigEnd 1.3.6.1.4.1.3085.3.1.6.2.1.2.5.3
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionFwPop3Config 1.3.6.1.4.1.3085.3.1.6.2.1.2.6
OBJECT IDENTIFIER    

csOrionFwPop3PolicyTable 1.3.6.1.4.1.3085.3.1.6.2.1.2.6.1
This table specifies individual POP3 Policies. The Fw Access Table identifies the specific policies to apply to specific POP3 connections.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionFwPop3PolicyEntry

csOrionFwPop3PolicyEntry 1.3.6.1.4.1.3085.3.1.6.2.1.2.6.1.1
Each entry specifies a single POP3 Policy.
OBJECT-TYPE    
  CsOrionFwPop3PolicyEntry  

csOrionFwPop3PolicyName 1.3.6.1.4.1.3085.3.1.6.2.1.2.6.1.1.1
The name used to identify this POP3 Policy entry.
OBJECT-TYPE    
  DisplayString SIZE(1..64)  

csOrionFwPop3PolicyAuthenticate 1.3.6.1.4.1.3085.3.1.6.2.1.2.6.1.1.2
This flag indicates if additional user authentication is required.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOrionFwPop3PolicyTimeout 1.3.6.1.4.1.3085.3.1.6.2.1.2.6.1.1.3
The number of seconds the proxy is idle before disconnecting.
OBJECT-TYPE    
  Integer32 1..2147483647  

csOrionFwPop3PolicyPopServer 1.3.6.1.4.1.3085.3.1.6.2.1.2.6.1.1.4
The default internal POP server for email.
OBJECT-TYPE    
  DisplayString SIZE(0..128)  

csOrionFwPop3PolicyRowStatus 1.3.6.1.4.1.3085.3.1.6.2.1.2.6.1.1.7
The Row Status object for this table.
OBJECT-TYPE    
  RowStatus  

csOrionFwPop3ConfigEnd 1.3.6.1.4.1.3085.3.1.6.2.1.2.6.2
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionFwPlugConfig 1.3.6.1.4.1.3085.3.1.6.2.1.2.7
OBJECT IDENTIFIER    

csOrionFwPlugPolicyTable 1.3.6.1.4.1.3085.3.1.6.2.1.2.7.1
This table specifies individual PLUG Policies. The Fw Access Table identifies the specific policies to apply to specific PLUG connections.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionFwPlugPolicyEntry

csOrionFwPlugPolicyEntry 1.3.6.1.4.1.3085.3.1.6.2.1.2.7.1.1
Each entry specifies a single PLUG Policy.
OBJECT-TYPE    
  CsOrionFwPlugPolicyEntry  

csOrionFwPlugPolicyName 1.3.6.1.4.1.3085.3.1.6.2.1.2.7.1.1.1
The name used to identify this PLUG Policy entry.
OBJECT-TYPE    
  DisplayString SIZE(1..64)  

csOrionFwPlugPolicyAuthenticate 1.3.6.1.4.1.3085.3.1.6.2.1.2.7.1.1.2
This flag indicates if additional user authentication is required. NOTE: Authenticate attribute is not applicable to this kind of application.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOrionFwPlugPolicyTimeout 1.3.6.1.4.1.3085.3.1.6.2.1.2.7.1.1.3
The number of seconds the proxy is idle before disconnecting.
OBJECT-TYPE    
  Integer32 1..2147483647  

csOrionFwPlugPolicyRemoteServer 1.3.6.1.4.1.3085.3.1.6.2.1.2.7.1.1.4
The remote server.
OBJECT-TYPE    
  DisplayString SIZE(0..128)  

csOrionFwPlugPolicyRemotePort 1.3.6.1.4.1.3085.3.1.6.2.1.2.7.1.1.5
The remote server's port number.
OBJECT-TYPE    
  Integer32 0..65535  

csOrionFwPlugPolicyRowStatus 1.3.6.1.4.1.3085.3.1.6.2.1.2.7.1.1.6
The Row Status object for this table.
OBJECT-TYPE    
  RowStatus  

csOrionFwPlugConfigEnd 1.3.6.1.4.1.3085.3.1.6.2.1.2.7.2
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionFwNntpConfig 1.3.6.1.4.1.3085.3.1.6.2.1.2.8
OBJECT IDENTIFIER    

csOrionFwNntpPolicyTable 1.3.6.1.4.1.3085.3.1.6.2.1.2.8.1
This table specifies individual NNTP Policies. The Fw Access Table identifies the specific policies to apply to specific NNTP connections.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionFwNntpPolicyEntry

csOrionFwNntpPolicyEntry 1.3.6.1.4.1.3085.3.1.6.2.1.2.8.1.1
Each entry specifies a single NNTP Policy.
OBJECT-TYPE    
  CsOrionFwNntpPolicyEntry  

csOrionFwNntpPolicyName 1.3.6.1.4.1.3085.3.1.6.2.1.2.8.1.1.1
The name used to identify this NNTP Policy entry.
OBJECT-TYPE    
  DisplayString SIZE(1..64)  

csOrionFwNntpPolicyAuthenticate 1.3.6.1.4.1.3085.3.1.6.2.1.2.8.1.1.2
This flag indicates if additional user authentication is required. NOTE: Authenticate attribute is not applicable to this kind of application.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOrionFwNntpPolicyTimeout 1.3.6.1.4.1.3085.3.1.6.2.1.2.8.1.1.3
The number of seconds the proxy is idle before disconnecting.
OBJECT-TYPE    
  Integer32 1..2147483647  

csOrionFwNntpPolicyRemoteServer 1.3.6.1.4.1.3085.3.1.6.2.1.2.8.1.1.4
The internal NEWS server.
OBJECT-TYPE    
  DisplayString SIZE(0..128)  

csOrionFwNntpPolicyRemotePort 1.3.6.1.4.1.3085.3.1.6.2.1.2.8.1.1.5
The internal NEWS server's port number.
OBJECT-TYPE    
  Integer32 0..65535  

csOrionFwNntpPolicyRowStatus 1.3.6.1.4.1.3085.3.1.6.2.1.2.8.1.1.6
The Row Status object for this table.
OBJECT-TYPE    
  RowStatus  

csOrionFwNntpConfigEnd 1.3.6.1.4.1.3085.3.1.6.2.1.2.8.2
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionFwLdapConfig 1.3.6.1.4.1.3085.3.1.6.2.1.2.9
OBJECT IDENTIFIER    

csOrionFwLdapPolicyTable 1.3.6.1.4.1.3085.3.1.6.2.1.2.9.1
This table specifies individual LDAP Policies. The Fw Access Table identifies the specific policies to apply to specific LDAP connections.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionFwLdapPolicyEntry

csOrionFwLdapPolicyEntry 1.3.6.1.4.1.3085.3.1.6.2.1.2.9.1.1
Each entry specifies a single LDAP Policy.
OBJECT-TYPE    
  CsOrionFwLdapPolicyEntry  

csOrionFwLdapPolicyName 1.3.6.1.4.1.3085.3.1.6.2.1.2.9.1.1.1
The name used to identify this LDAP Policy entry.
OBJECT-TYPE    
  DisplayString SIZE(1..64)  

csOrionFwLdapPolicyAuthenticate 1.3.6.1.4.1.3085.3.1.6.2.1.2.9.1.1.2
This flag indicates if additional user authentication is required. NOTE: Authenticate attribute is not applicable to this kind of application.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOrionFwLdapPolicyTimeout 1.3.6.1.4.1.3085.3.1.6.2.1.2.9.1.1.3
The number of seconds the proxy is idle before disconnecting.
OBJECT-TYPE    
  Integer32 1..2147483647  

csOrionFwLdapPolicyRemoteServer 1.3.6.1.4.1.3085.3.1.6.2.1.2.9.1.1.4
The internal LDAP server.
OBJECT-TYPE    
  DisplayString SIZE(0..128)  

csOrionFwLdapPolicyRemotePort 1.3.6.1.4.1.3085.3.1.6.2.1.2.9.1.1.5
The internal LDAP server's port number.
OBJECT-TYPE    
  Integer32 0..65535  

csOrionFwLdapPolicyRowStatus 1.3.6.1.4.1.3085.3.1.6.2.1.2.9.1.1.6
The Row Status object for this table.
OBJECT-TYPE    
  RowStatus  

csOrionFwLdapConfigEnd 1.3.6.1.4.1.3085.3.1.6.2.1.2.9.2
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionFwLnotesConfig 1.3.6.1.4.1.3085.3.1.6.2.1.2.10
OBJECT IDENTIFIER    

csOrionFwLnotesPolicyTable 1.3.6.1.4.1.3085.3.1.6.2.1.2.10.1
This table specifies individual LNOTES Policies. The Fw Access Table identifies the specific policies to apply to specific LNOTES connections.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionFwLnotesPolicyEntry

csOrionFwLnotesPolicyEntry 1.3.6.1.4.1.3085.3.1.6.2.1.2.10.1.1
Each entry specifies a single LNOTES Policy.
OBJECT-TYPE    
  CsOrionFwLnotesPolicyEntry  

csOrionFwLnotesPolicyName 1.3.6.1.4.1.3085.3.1.6.2.1.2.10.1.1.1
The name used to identify this LNOTES Policy entry.
OBJECT-TYPE    
  DisplayString SIZE(1..64)  

csOrionFwLnotesPolicyAuthenticate 1.3.6.1.4.1.3085.3.1.6.2.1.2.10.1.1.2
This flag indicates if additional user authentication is required. NOTE: Authenticate attribute is not applicable to this kind of application.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOrionFwLnotesPolicyTimeout 1.3.6.1.4.1.3085.3.1.6.2.1.2.10.1.1.3
The number of seconds the proxy is idle before disconnecting.
OBJECT-TYPE    
  Integer32 1..2147483647  

csOrionFwLnotesPolicyRemoteServer 1.3.6.1.4.1.3085.3.1.6.2.1.2.10.1.1.4
The internal Lotus Notes server.
OBJECT-TYPE    
  DisplayString SIZE(0..128)  

csOrionFwLnotesPolicyRemotePort 1.3.6.1.4.1.3085.3.1.6.2.1.2.10.1.1.5
The internal Lotus Notes server's port number.
OBJECT-TYPE    
  Integer32 0..65535  

csOrionFwLnotesPolicyRowStatus 1.3.6.1.4.1.3085.3.1.6.2.1.2.10.1.1.6
The Row Status object for this table.
OBJECT-TYPE    
  RowStatus  

csOrionFwLnotesConfigEnd 1.3.6.1.4.1.3085.3.1.6.2.1.2.10.2
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionFwAolConfig 1.3.6.1.4.1.3085.3.1.6.2.1.2.11
OBJECT IDENTIFIER    

csOrionFwAolPolicyTable 1.3.6.1.4.1.3085.3.1.6.2.1.2.11.1
This table specifies individual AOL Policies. The Fw Access Table identifies the specific policies to apply to specific AOL connections.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionFwAolPolicyEntry

csOrionFwAolPolicyEntry 1.3.6.1.4.1.3085.3.1.6.2.1.2.11.1.1
Each entry specifies a single AOL Policy.
OBJECT-TYPE    
  CsOrionFwAolPolicyEntry  

csOrionFwAolPolicyName 1.3.6.1.4.1.3085.3.1.6.2.1.2.11.1.1.1
The name used to identify this AOL Policy entry.
OBJECT-TYPE    
  DisplayString SIZE(1..64)  

csOrionFwAolPolicyTimeout 1.3.6.1.4.1.3085.3.1.6.2.1.2.11.1.1.2
The number of seconds the proxy is idle before disconnecting.
OBJECT-TYPE    
  Integer32 1..2147483647  

csOrionFwAolPolicyRemoteServer 1.3.6.1.4.1.3085.3.1.6.2.1.2.11.1.1.3
The internal AOL server.
OBJECT-TYPE    
  DisplayString SIZE(0..128)  

csOrionFwAolPolicyRemotePort 1.3.6.1.4.1.3085.3.1.6.2.1.2.11.1.1.4
The internal AOL server's port number.
OBJECT-TYPE    
  Integer32 0..65535  

csOrionFwAolPolicyRowStatus 1.3.6.1.4.1.3085.3.1.6.2.1.2.11.1.1.5
The Row Status object for this table.
OBJECT-TYPE    
  RowStatus  

csOrionFwAolConfigEnd 1.3.6.1.4.1.3085.3.1.6.2.1.2.11.2
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionFwCompuServeConfig 1.3.6.1.4.1.3085.3.1.6.2.1.2.12
OBJECT IDENTIFIER    

csOrionFwCompuServePolicyTable 1.3.6.1.4.1.3085.3.1.6.2.1.2.12.1
This table specifies individual CompuServe Policies. The Fw Access Table identifies the specific policies to apply to specific CompuServe connections.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionFwCompuServePolicyEntry

csOrionFwCompuServePolicyEntry 1.3.6.1.4.1.3085.3.1.6.2.1.2.12.1.1
Each entry specifies a single CompuServe Policy.
OBJECT-TYPE    
  CsOrionFwCompuServePolicyEntry  

csOrionFwCompuServePolicyName 1.3.6.1.4.1.3085.3.1.6.2.1.2.12.1.1.1
The name used to identify this CompuServe Policy entry.
OBJECT-TYPE    
  DisplayString SIZE(1..64)  

csOrionFwCompuServePolicyTimeout 1.3.6.1.4.1.3085.3.1.6.2.1.2.12.1.1.2
The number of seconds the proxy is idle before disconnecting.
OBJECT-TYPE    
  Integer32 1..2147483647  

csOrionFwCompuServePolicyRemoteServer 1.3.6.1.4.1.3085.3.1.6.2.1.2.12.1.1.3
The internal CompuServe server.
OBJECT-TYPE    
  DisplayString SIZE(0..128)  

csOrionFwCompuServePolicyRemotePort 1.3.6.1.4.1.3085.3.1.6.2.1.2.12.1.1.4
The internal CompuServe server's port number.
OBJECT-TYPE    
  Integer32 0..65535  

csOrionFwCompuServePolicyRowStatus 1.3.6.1.4.1.3085.3.1.6.2.1.2.12.1.1.5
The Row Status object for this table.
OBJECT-TYPE    
  RowStatus  

csOrionFwCompuServeConfigEnd 1.3.6.1.4.1.3085.3.1.6.2.1.2.12.2
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionFwNetMeetingConfig 1.3.6.1.4.1.3085.3.1.6.2.1.2.13
OBJECT IDENTIFIER    

csOrionFwNetMeetingPolicyTable 1.3.6.1.4.1.3085.3.1.6.2.1.2.13.1
This table specifies individual NetMeeting Policies. The Fw Access Table identifies the specific policies to apply to specific NetMeeting connections.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionFwNetMeetingPolicyEntry

csOrionFwNetMeetingPolicyEntry 1.3.6.1.4.1.3085.3.1.6.2.1.2.13.1.1
Each entry specifies a single NetMeeting Policy.
OBJECT-TYPE    
  CsOrionFwNetMeetingPolicyEntry  

csOrionFwNetMeetingPolicyName 1.3.6.1.4.1.3085.3.1.6.2.1.2.13.1.1.1
The name used to identify this NetMeeting Policy entry.
OBJECT-TYPE    
  DisplayString SIZE(1..64)  

csOrionFwNetMeetingPolicyTimeout 1.3.6.1.4.1.3085.3.1.6.2.1.2.13.1.1.2
The number of seconds the proxy is idle before disconnecting.
OBJECT-TYPE    
  Integer32 1..2147483647  

csOrionFwNetMeetingPolicyRemoteServer 1.3.6.1.4.1.3085.3.1.6.2.1.2.13.1.1.3
The internal NetMeeting server.
OBJECT-TYPE    
  DisplayString SIZE(0..128)  

csOrionFwNetMeetingPolicyRemotePort 1.3.6.1.4.1.3085.3.1.6.2.1.2.13.1.1.4
The internal NetMeeting server's port number.
OBJECT-TYPE    
  Integer32 0..65535  

csOrionFwNetMeetingPolicyRowStatus 1.3.6.1.4.1.3085.3.1.6.2.1.2.13.1.1.5
The Row Status object for this table.
OBJECT-TYPE    
  RowStatus  

csOrionFwNetMeetingConfigEnd 1.3.6.1.4.1.3085.3.1.6.2.1.2.13.2
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionFwMsSqlConfig 1.3.6.1.4.1.3085.3.1.6.2.1.2.14
OBJECT IDENTIFIER    

csOrionFwMsSqlPolicyTable 1.3.6.1.4.1.3085.3.1.6.2.1.2.14.1
This table specifies individual Microsoft SQL/Sybase Policies. The Fw Access Table identifies the specific policies to apply to specific Microsoft SQL/Sybase connections.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionFwMsSqlPolicyEntry

csOrionFwMsSqlPolicyEntry 1.3.6.1.4.1.3085.3.1.6.2.1.2.14.1.1
Each entry specifies a single Microsoft SQL/Sybase Policy.
OBJECT-TYPE    
  CsOrionFwMsSqlPolicyEntry  

csOrionFwMsSqlPolicyName 1.3.6.1.4.1.3085.3.1.6.2.1.2.14.1.1.1
The name used to identify this Microsoft SQL/Sybase Policy entry.
OBJECT-TYPE    
  DisplayString SIZE(1..64)  

csOrionFwMsSqlPolicyTimeout 1.3.6.1.4.1.3085.3.1.6.2.1.2.14.1.1.2
The number of seconds the proxy is idle before disconnecting.
OBJECT-TYPE    
  Integer32 1..2147483647  

csOrionFwMsSqlPolicyRemoteServer 1.3.6.1.4.1.3085.3.1.6.2.1.2.14.1.1.3
The internal Microsoft SQL or Sybase server.
OBJECT-TYPE    
  DisplayString SIZE(0..128)  

csOrionFwMsSqlPolicyRemotePort 1.3.6.1.4.1.3085.3.1.6.2.1.2.14.1.1.4
The internal Microsoft SQL or Sybase server's port number.
OBJECT-TYPE    
  Integer32 0..65535  

csOrionFwMsSqlPolicyRowStatus 1.3.6.1.4.1.3085.3.1.6.2.1.2.14.1.1.5
The Row Status object for this table.
OBJECT-TYPE    
  RowStatus  

csOrionFwMsSqlConfigEnd 1.3.6.1.4.1.3085.3.1.6.2.1.2.14.2
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionFwRshConfig 1.3.6.1.4.1.3085.3.1.6.2.1.2.15
OBJECT IDENTIFIER    

csOrionFwRshPolicyTable 1.3.6.1.4.1.3085.3.1.6.2.1.2.15.1
This table specifies individual Remote Shell (RSH) Policies. The Fw Access Table identifies the specific policies to apply to specific RSH connections.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionFwRshPolicyEntry

csOrionFwRshPolicyEntry 1.3.6.1.4.1.3085.3.1.6.2.1.2.15.1.1
Each entry specifies a single RSH Policy.
OBJECT-TYPE    
  CsOrionFwRshPolicyEntry  

csOrionFwRshPolicyName 1.3.6.1.4.1.3085.3.1.6.2.1.2.15.1.1.1
The name used to identify this RSH Policy entry.
OBJECT-TYPE    
  DisplayString SIZE(1..64)  

csOrionFwRshPolicyTimeout 1.3.6.1.4.1.3085.3.1.6.2.1.2.15.1.1.2
The number of seconds the proxy is idle before disconnecting. For RSH proxy, the idle timer is triggered if no activities are detected on BOTH control and error connections.
OBJECT-TYPE    
  Integer32 1..2147483647  

csOrionFwRshPolicyRemoteServer 1.3.6.1.4.1.3085.3.1.6.2.1.2.15.1.1.3
The internal RSH server.
OBJECT-TYPE    
  DisplayString SIZE(0..128)  

csOrionFwRshPolicyRowStatus 1.3.6.1.4.1.3085.3.1.6.2.1.2.15.1.1.4
The Row Status object for this table.
OBJECT-TYPE    
  RowStatus  

csOrionFWInfoEnd 1.3.6.1.4.1.3085.3.1.6.2.2
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionPktFilterInfo 1.3.6.1.4.1.3085.3.1.6.3
OBJECT IDENTIFIER    

csOrionVrPktFilterTable 1.3.6.1.4.1.3085.3.1.6.3.1
This table specifies a set of filters to be applied to packets received over each the interfaces over this virtual router. Filters can be configured either to permit a packet, deny a packet, or send the packet to a firewall proxy.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionVrPktFilterEntry

csOrionVrPktFilterEntry 1.3.6.1.4.1.3085.3.1.6.3.1.1
Each filter specifies whether packets satisfying a specific access list entry are permitted or denied to be passed along their route.
OBJECT-TYPE    
  CsOrionVrPktFilterEntry  

csOrionVrPktFilterIndex 1.3.6.1.4.1.3085.3.1.6.3.1.1.1
The Index of this particular Packet Filter.
OBJECT-TYPE    
  Integer32 1..2147483647  

csOrionVrPktFilterAclId 1.3.6.1.4.1.3085.3.1.6.3.1.1.2
The Id of an access list entry (from csOrionGenAclTable). All packets transmitted or received on any of the virtual interfaces on this virtual router that satisfy that access list entry are acted upon by this filter.
OBJECT-TYPE    
  Integer32 0..65535  

csOrionVrPktFilterAction 1.3.6.1.4.1.3085.3.1.6.3.1.1.3
The action performed by this filter.
OBJECT-TYPE    
  INTEGER permit(1), deny(2), firewall(3), spf(4), spfRev(5), spfHW(6), spfHWRev(7)  

csOrionVrPktFilterDirection 1.3.6.1.4.1.3085.3.1.6.3.1.1.4
The direction of packets on which this filter is applied.
OBJECT-TYPE    
  INTEGER in(1), out(2)  

csOrionVrPktFilterRowStatus 1.3.6.1.4.1.3085.3.1.6.3.1.1.5
A row status type for this Table entry.
OBJECT-TYPE    
  RowStatus  

csOrionVrPktFilterTcpStatus 1.3.6.1.4.1.3085.3.1.6.3.1.1.6
The state of the TCP.
OBJECT-TYPE    
  INTEGER dontCare(1), setup(2), established(3)  

csOrionVrPktFilterHitCounter 1.3.6.1.4.1.3085.3.1.6.3.1.1.7
When csOrionVrPktFilterHitCounter is enabled, the counter be incremented everytime a packet that corresponds to the packet filter is received.
OBJECT-TYPE    
  Counter64  

csOrionVrPktFilterCounterStatus 1.3.6.1.4.1.3085.3.1.6.3.1.1.8
The status of csOrionVrPktFilterHitCounter. Will also be enabled as a result of enabling csOrionVrPktFilterEvlogStatus.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOrionVrPktFilterEvlogStatus 1.3.6.1.4.1.3085.3.1.6.3.1.1.9
If enabled, event logs will be sent when a packet hits this packet filter. Will also result to csOrionVrPktFilterCounterStatus enabled.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOrionViPktFilterTable 1.3.6.1.4.1.3085.3.1.6.3.2
This table specifies a set of filters to be applied to packets received over this virtual interface. Filters can be configured either to permit a packet, deny a packet, or send the packet to a firewall proxy.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionViPktFilterEntry

csOrionViPktFilterEntry 1.3.6.1.4.1.3085.3.1.6.3.2.1
Each filter specifies whether packets satisfying a specific access list entry are permitted or denied to be passed along their route.
OBJECT-TYPE    
  CsOrionViPktFilterEntry  

csOrionViPktFilterIndex 1.3.6.1.4.1.3085.3.1.6.3.2.1.1
The Index of this particular Packet Filter.
OBJECT-TYPE    
  Integer32 1..2147483647  

csOrionViPktFilterAclId 1.3.6.1.4.1.3085.3.1.6.3.2.1.2
The Id of an access list entry (from csOrionGenAclTable). All packets transmitted or received on this virtual interface that access list entry are acted upon by this filter.
OBJECT-TYPE    
  Integer32 0..65535  

csOrionViPktFilterAction 1.3.6.1.4.1.3085.3.1.6.3.2.1.3
The action performed by this filter.
OBJECT-TYPE    
  INTEGER permit(1), deny(2), firewall(3), spf(4), spfRev(5), spfHW(6), spfHWRev(7)  

csOrionViPktFilterDirection 1.3.6.1.4.1.3085.3.1.6.3.2.1.4
The direction of packets on which this filter is applied.
OBJECT-TYPE    
  INTEGER in(1), out(2)  

csOrionViPktFilterRowStatus 1.3.6.1.4.1.3085.3.1.6.3.2.1.5
A row status type for this Table entry.
OBJECT-TYPE    
  RowStatus  

csOrionViPktFilterTcpStatus 1.3.6.1.4.1.3085.3.1.6.3.2.1.6
The state of the TCP.
OBJECT-TYPE    
  INTEGER dontCare(1), setup(2), established(3)  

csOrionViPktFilterHitCounter 1.3.6.1.4.1.3085.3.1.6.3.2.1.7
When csOrionViPktFilterHitCounter is enabled, the counter be incremented everytime a packet that corresponds to the packet filter is received.
OBJECT-TYPE    
  Counter64  

csOrionViPktFilterCounterStatus 1.3.6.1.4.1.3085.3.1.6.3.2.1.8
The status of csOrionViPktFilterHitCounter. Will also be enabled as a result of enabling csOrionViPktFilterEvlogStatus.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOrionViPktFilterEvlogStatus 1.3.6.1.4.1.3085.3.1.6.3.2.1.9
If enabled, event logs will be sent when a packet hits this packet filter. Will also result to csOrionViPktFilterCounterStatus reset and enabled.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOrionPktFilterInfoEnd 1.3.6.1.4.1.3085.3.1.6.3.3
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionNatInfo 1.3.6.1.4.1.3085.3.1.6.4
OBJECT IDENTIFIER    

csOrionNatPoolTable 1.3.6.1.4.1.3085.3.1.6.4.1
A list of Access List Entries.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionNatPoolEntry

csOrionNatPoolEntry 1.3.6.1.4.1.3085.3.1.6.4.1.1
An entry containing filtering information used to classify packets.
OBJECT-TYPE    
  CsOrionNatPoolEntry  

csOrionNatPoolId 1.3.6.1.4.1.3085.3.1.6.4.1.1.1
An identifier for this Nat Pool Entry.
OBJECT-TYPE    
  Integer32 1..65535  

csOrionNatPoolStartAddress 1.3.6.1.4.1.3085.3.1.6.4.1.1.2
OBJECT-TYPE    
  IpAddress  

csOrionNatPoolEndAddress 1.3.6.1.4.1.3085.3.1.6.4.1.1.3
OBJECT-TYPE    
  IpAddress  

csOrionNatPoolStartPort 1.3.6.1.4.1.3085.3.1.6.4.1.1.4
OBJECT-TYPE    
  Integer32 -1..2147483647  

csOrionNatPoolEndPort 1.3.6.1.4.1.3085.3.1.6.4.1.1.5
OBJECT-TYPE    
  Integer32 -1..2147483647  

csOrionNatPoolStatus 1.3.6.1.4.1.3085.3.1.6.4.1.1.6
OBJECT-TYPE    
  RowStatus  

csOrionNatTranslationTable 1.3.6.1.4.1.3085.3.1.6.4.2
This contains the NAT translation entries.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionNatTranslationEntry

csOrionNatTranslationEntry 1.3.6.1.4.1.3085.3.1.6.4.2.1
An entry containing IP address, port and the protocol information corresponding to a session.
OBJECT-TYPE    
  CsOrionNatTranslationEntry  

csOrionNatInsideLocalAddr 1.3.6.1.4.1.3085.3.1.6.4.2.1.1
OBJECT-TYPE    
  IpAddress  

csOrionNatInsideLocalPort 1.3.6.1.4.1.3085.3.1.6.4.2.1.2
OBJECT-TYPE    
  Integer32  

csOrionNatOutsideGlobalAddr 1.3.6.1.4.1.3085.3.1.6.4.2.1.3
OBJECT-TYPE    
  IpAddress  

csOrionNatOutsideGlobalPort 1.3.6.1.4.1.3085.3.1.6.4.2.1.4
OBJECT-TYPE    
  Integer32  

csOrionNatProtocol 1.3.6.1.4.1.3085.3.1.6.4.2.1.5
OBJECT-TYPE    
  Integer32  

csOrionNatInsideGlobalAddr 1.3.6.1.4.1.3085.3.1.6.4.2.1.6
OBJECT-TYPE    
  IpAddress  

csOrionNatInsideGlobalPort 1.3.6.1.4.1.3085.3.1.6.4.2.1.7
OBJECT-TYPE    
  Integer32  

csOrionNatStaticTranslationTable 1.3.6.1.4.1.3085.3.1.6.4.3
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionNatStaticTranslationEntry

csOrionNatStaticTranslationEntry 1.3.6.1.4.1.3085.3.1.6.4.3.1
OBJECT-TYPE    
  CsOrionNatStaticTranslationEntry  

csOrionNatStaticInsideLocalAddress 1.3.6.1.4.1.3085.3.1.6.4.3.1.1
An identifier for this Nat Pool Entry. The address as known in the private network.
OBJECT-TYPE    
  IpAddress  

csOrionNatStaticInsideGlobalAddress 1.3.6.1.4.1.3085.3.1.6.4.3.1.2
The address as know in the outside world.
OBJECT-TYPE    
  IpAddress  

csOrionNatStaticTranslationStatus 1.3.6.1.4.1.3085.3.1.6.4.3.1.3
OBJECT-TYPE    
  RowStatus  

csOrionNatStaticNetmask 1.3.6.1.4.1.3085.3.1.6.4.3.1.4
The network mask. For one-to-one static NAT translation, mask should be zero.
OBJECT-TYPE    
  IpAddress  

csOrionNatStaticTranslationType 1.3.6.1.4.1.3085.3.1.6.4.3.1.5
Source address translation will be for outgoing packets and destination address translation will be for incoming packets.
OBJECT-TYPE    
  INTEGER src(1), dst(2)  

csOrionNatStaticVITranslationTable 1.3.6.1.4.1.3085.3.1.6.4.4
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionNatStaticVITranslationEntry

csOrionNatStaticVITranslationEntry 1.3.6.1.4.1.3085.3.1.6.4.4.1
OBJECT-TYPE    
  CsOrionNatStaticVITranslationEntry  

csOrionNatStaticIfIndex 1.3.6.1.4.1.3085.3.1.6.4.4.1.1
The VI where to apply the static NAT translation.
OBJECT-TYPE    
  Integer32  

csOrionNatStaticVIInsideLocalAddress 1.3.6.1.4.1.3085.3.1.6.4.4.1.2
An identifier for this Nat Pool Entry. The address as known in the private network.
OBJECT-TYPE    
  IpAddress  

csOrionNatStaticVIInsideGlobalAddress 1.3.6.1.4.1.3085.3.1.6.4.4.1.3
The address as know in the outside world.
OBJECT-TYPE    
  IpAddress  

csOrionNatStaticVINetmask 1.3.6.1.4.1.3085.3.1.6.4.4.1.4
The network mask. For one-to-one static NAT translation, mask should be zero.
OBJECT-TYPE    
  IpAddress  

csOrionNatStaticVITranslationType 1.3.6.1.4.1.3085.3.1.6.4.4.1.5
Source address translation will be for outgoing packets and destination address translation will be for incoming packets.
OBJECT-TYPE    
  INTEGER src(1), dst(2)  

csOrionNatStaticVITranslationStatus 1.3.6.1.4.1.3085.3.1.6.4.4.1.6
OBJECT-TYPE    
  RowStatus  

csOrionNatInfoEnd 1.3.6.1.4.1.3085.3.1.6.4.5
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionNatGeneralParamTable 1.3.6.1.4.1.3085.3.1.6.4.6
Table for common NAT attributes.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionNatGeneralParamEntry

csOrionNatGeneralParamEntry 1.3.6.1.4.1.3085.3.1.6.4.6.1
This table contains the NAT generic configuration parameters
OBJECT-TYPE    
  CsOrionNatGeneralParamEntry  

csOrionNatGenTimeout 1.3.6.1.4.1.3085.3.1.6.4.6.1.1
The NAT translation entry global timeout. The global timeout setting will be used by protocols that don't have their own inactivity timeout configurable. Default value is 15 minutes. Minimum is 5 minutes. Maximum is 1 year.
OBJECT-TYPE    
  Integer32 5..525600  

csOrionNatTcpTimeout 1.3.6.1.4.1.3085.3.1.6.4.6.1.2
The inactivity timeout for entries from TCP traffic in the translation table. Default value is 15 minutes. Minimum is 5 minutes. Maximum is 1 year.
OBJECT-TYPE    
  Integer32 5..525600  

csOrionNatUdpTimeout 1.3.6.1.4.1.3085.3.1.6.4.6.1.3
The inactivity timeout for entries from UDP traffic in the translation table. Default value is 15 minutes. Minimum is 5 minutes. Maximum is 1 year.
OBJECT-TYPE    
  Integer32 5..525600  

csOrionNatIcmpTimeout 1.3.6.1.4.1.3085.3.1.6.4.6.1.4
The inactivity timeout for entries from ICMP traffic in the translation table. Default value is 15 minutes. Minimum is 5 minutes. Maximum is 1 year.
OBJECT-TYPE    
  Integer32 5..525600  

csOrionNatClearTrans 1.3.6.1.4.1.3085.3.1.6.4.6.1.5
Setting this flag to clear will cause all entries in the translation table to be removed.
OBJECT-TYPE    
  INTEGER none(1), clear(2)  

csOrionNatGeneralParamTableEnd 1.3.6.1.4.1.3085.3.1.6.4.7
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionEncryptInfo 1.3.6.1.4.1.3085.3.1.6.5
OBJECT IDENTIFIER    

csOrionIpSecTransformTable 1.3.6.1.4.1.3085.3.1.6.5.1
A table for IPSEC transforms.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionIpSecTransformEntry

csOrionIpSecTransformEntry 1.3.6.1.4.1.3085.3.1.6.5.1.1
Each entry contains a specific set of IPSEC Transforms for use by a Security Association.
OBJECT-TYPE    
  CsOrionIpSecTransformEntry  

csOrionIpSecTransformName 1.3.6.1.4.1.3085.3.1.6.5.1.1.1
An index for the IpSec Transform Set table.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionIpSecTransform1 1.3.6.1.4.1.3085.3.1.6.5.1.1.2
The first Transform in the IpSec Transform Set table.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionIpSecTransform2 1.3.6.1.4.1.3085.3.1.6.5.1.1.3
The second Transform in the IpSec Transform Set table. If no transform is specified, this object will have a zero length string.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionIpSecTransform3 1.3.6.1.4.1.3085.3.1.6.5.1.1.4
The third Transform in the IpSec Transform Set table. If no transform is specified, this object will have a zero length string.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionIpSecTransformInitVector 1.3.6.1.4.1.3085.3.1.6.5.1.1.5
The size of the Initial Vector used by the IPSEC Transform Set.
OBJECT-TYPE    
  INTEGER four(4), eight(8)  

csOrionIpSecTransformMode 1.3.6.1.4.1.3085.3.1.6.5.1.1.6
The ipsec mode used by this IPSEC Transform Set.
OBJECT-TYPE    
  INTEGER tunnel(1), transport(2)  

csOrionIpSecTransformStatus 1.3.6.1.4.1.3085.3.1.6.5.1.1.7
A row status type for the IpSec Transform Table.
OBJECT-TYPE    
  RowStatus  

csOrionDynamicCryptoMapTable 1.3.6.1.4.1.3085.3.1.6.5.2
A table for Dynamic Crypto Map.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionDynamicCryptoMapEntry

csOrionDynamicCryptoMapEntry 1.3.6.1.4.1.3085.3.1.6.5.2.1
Each entry contains a specific set of Dynamic Crypto Map for use by a Security Association.
OBJECT-TYPE    
  CsOrionDynamicCryptoMapEntry  

csOrionDynamicCryptoMapName 1.3.6.1.4.1.3085.3.1.6.5.2.1.1
An index for the Dynamic Crypto Map Table.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionDynamicCryptoMapNumber 1.3.6.1.4.1.3085.3.1.6.5.2.1.2
An index for the Dynamic Crypto Map Table.
OBJECT-TYPE    
  Integer32  

csOrionDynamicCryptoMapMatchAddress 1.3.6.1.4.1.3085.3.1.6.5.2.1.3
Access List ID used by this Dynamic Crypto Map.
OBJECT-TYPE    
  Integer32 0..65535  

csOrionDynamicCryptoMapPeer 1.3.6.1.4.1.3085.3.1.6.5.2.1.4
Peer Address for this Dynamic Crypto Map.
OBJECT-TYPE    
  IpAddress  

csOrionDynamicCryptoMapTransformSet1 1.3.6.1.4.1.3085.3.1.6.5.2.1.5
A transform set used by this Dynamic Crypto Map.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionDynamicCryptoMapTransformSet2 1.3.6.1.4.1.3085.3.1.6.5.2.1.6
A transform set used by this Dynamic Crypto Map.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionDynamicCryptoMapTransformSet3 1.3.6.1.4.1.3085.3.1.6.5.2.1.7
A transform set used by this Dynamic Crypto Map.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionDynamicCryptoMapTransformSet4 1.3.6.1.4.1.3085.3.1.6.5.2.1.8
A transform set used by this Dynamic Crypto Map.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionDynamicCryptoMapTransformSet5 1.3.6.1.4.1.3085.3.1.6.5.2.1.9
A transform set used by this Dynamic Crypto Map.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionDynamicCryptoMapTransformSet6 1.3.6.1.4.1.3085.3.1.6.5.2.1.10
A transform set used by this Dynamic Crypto Map.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionDynamicCryptoMapSessionKeyLifetimeSec 1.3.6.1.4.1.3085.3.1.6.5.2.1.11
A Session key lifetime in seconds used by this Dynamic Crypto Map.
OBJECT-TYPE    
  Integer32  

csOrionDynamicCryptoMapSessionKeyLifetimeBytes 1.3.6.1.4.1.3085.3.1.6.5.2.1.12
A Session key lifetime in bytes used by this Dynamic Crypto Map.
OBJECT-TYPE    
  Integer32  

csOrionDynamicCryptoMapPfs 1.3.6.1.4.1.3085.3.1.6.5.2.1.13
This object is used to request Perfect Forward Secrecy for this Dynamic Crypto Map.
OBJECT-TYPE    
  INTEGER group1(1), group2(2), none(3)  

csOrionDynamicCryptoMapStatus 1.3.6.1.4.1.3085.3.1.6.5.2.1.14
A row status type for the Dynamic Crypto Map.
OBJECT-TYPE    
  RowStatus  

csOrionManualCryptoMapTable 1.3.6.1.4.1.3085.3.1.6.5.3
A table for Manual Crypto Map.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionManualCryptoMapEntry

csOrionManualCryptoMapEntry 1.3.6.1.4.1.3085.3.1.6.5.3.1
Each entry contains a specific set of Manual Crypto Map for use by a Security Association.
OBJECT-TYPE    
  CsOrionManualCryptoMapEntry  

csOrionManualCryptoMapName 1.3.6.1.4.1.3085.3.1.6.5.3.1.1
An index for the Manual Crypto Map Table.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionManualCryptoMapNumber 1.3.6.1.4.1.3085.3.1.6.5.3.1.2
An index for the Manual Crypto Map Table.
OBJECT-TYPE    
  Integer32 1..10000  

csOrionManualCryptoMapMatchAddress 1.3.6.1.4.1.3085.3.1.6.5.3.1.3
Access List ID used by this Manual Crypto Map.
OBJECT-TYPE    
  Integer32  

csOrionManualCryptoMapTransformSet 1.3.6.1.4.1.3085.3.1.6.5.3.1.5
A transform set used by this Manual Crypto Map.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionManualCryptoMapInboundAHKey 1.3.6.1.4.1.3085.3.1.6.5.3.1.6
An inbound AH key used by this Manual Crypto Map.
OBJECT-TYPE    
  OCTET STRING SIZE(0..256)  

csOrionManualCryptoMapInboundAHSPI 1.3.6.1.4.1.3085.3.1.6.5.3.1.7
An inbound AH SPI used by this Manual Crypto Map.
OBJECT-TYPE    
  Integer32  

csOrionManualCryptoMapOutboundAHKey 1.3.6.1.4.1.3085.3.1.6.5.3.1.8
An outbound AH key used by this Manual Crypto Map.
OBJECT-TYPE    
  OCTET STRING SIZE(0..256)  

csOrionManualCryptoMapOutboundAHSPI 1.3.6.1.4.1.3085.3.1.6.5.3.1.9
An outbound AH SPI used by this Manual Crypto Map.
OBJECT-TYPE    
  Integer32  

csOrionManualCryptoMapInboundESPKey 1.3.6.1.4.1.3085.3.1.6.5.3.1.10
An inbound ESP key used by this Manual Crypto Map.
OBJECT-TYPE    
  OCTET STRING SIZE(0..256)  

csOrionManualCryptoMapInboundESPSPI 1.3.6.1.4.1.3085.3.1.6.5.3.1.11
An inbound ESP SPI used by this Manual Crypto Map.
OBJECT-TYPE    
  Integer32  

csOrionManualCryptoMapInboundESPAuthKey 1.3.6.1.4.1.3085.3.1.6.5.3.1.12
An inbound ESP authentication key used by this Manual Crypto Map.
OBJECT-TYPE    
  OCTET STRING SIZE(0..256)  

csOrionManualCryptoMapOutboundESPKey 1.3.6.1.4.1.3085.3.1.6.5.3.1.13
An outbound ESP key used by this Manual Crypto Map.
OBJECT-TYPE    
  OCTET STRING SIZE(0..256)  

csOrionManualCryptoMapOutboundESPSPI 1.3.6.1.4.1.3085.3.1.6.5.3.1.14
An outbound ESP SPI used by this Manual Crypto Map.
OBJECT-TYPE    
  Integer32  

csOrionManualCryptoMapOutboundESPAuthKey 1.3.6.1.4.1.3085.3.1.6.5.3.1.15
An outbound ESP authentication key used by this Manual Crypto Map.
OBJECT-TYPE    
  OCTET STRING SIZE(0..256)  

csOrionManualCryptoMapStatus 1.3.6.1.4.1.3085.3.1.6.5.3.1.16
A row status type for the Manual Crypto Map.
OBJECT-TYPE    
  RowStatus  

csOrionIKECryptoMapTable 1.3.6.1.4.1.3085.3.1.6.5.4
A table for IKE Crypto Map.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionIKECryptoMapEntry

csOrionIKECryptoMapEntry 1.3.6.1.4.1.3085.3.1.6.5.4.1
Each entry contains a specific set of IKE Crypto Map for use by a Security Association.
OBJECT-TYPE    
  CsOrionIKECryptoMapEntry  

csOrionIKECryptoMapName 1.3.6.1.4.1.3085.3.1.6.5.4.1.1
An index for the IKE Crypto Map Table.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionIKECryptoMapNumber 1.3.6.1.4.1.3085.3.1.6.5.4.1.2
An index for the IKE Crypto Map Table.
OBJECT-TYPE    
  Integer32 1..10000  

csOrionIKECryptoMapFlag 1.3.6.1.4.1.3085.3.1.6.5.4.1.3
Each bit within this object enables a specific feature within the Crypto Map. Below is a list of the features and their corresponding bits identifiers. feature bit ------------------------------------------------------ pfs 0 pfs-identify 1 sa-per-net 5 -- note, sa-per-host & sa-per-net sa-per-host 6 -- are mutually exclusive sa-per-protocol 7 sa-per-port 8 main-mode 10 -- main-mode and aggressive-mode aggressive-mode 11 -- are mutually exclusive copy-df 21 dont-verify-padding 22 always-plain 29 passby 30 deny 31 end of description. NOTE: default value varies depending on csOrionIKECryptoMapType. 'isakmp' - default is 1056 (0x420 main-mode and sa-per-net) 'isakmpDialup' - default is 1088 (0x440 main-mode and sa-per-host).
OBJECT-TYPE    
  Unsigned32  

csOrionIKECryptoMapMatchAddress 1.3.6.1.4.1.3085.3.1.6.5.4.1.4
Access List ID used by this IKE Crypto Map.
OBJECT-TYPE    
  Integer32  

csOrionIKECryptoMapPfsGroup 1.3.6.1.4.1.3085.3.1.6.5.4.1.5
If one of the pfs features is enabled in csOrionIKECryptoMapFlags, this object is used to identify the Diffie-Helman group used for this IKE Crypto Map.
OBJECT-TYPE    
  INTEGER group1(1), group2(2), group5(5)  

csOrionIKECryptoMapKey 1.3.6.1.4.1.3085.3.1.6.5.4.1.6
OBJECT-TYPE    
  OCTET STRING SIZE(0..255)  

csOrionIKECryptoMapTransformSet1 1.3.6.1.4.1.3085.3.1.6.5.4.1.7
A transform set used by this IKE Crypto Map.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionIKECryptoMapTransformSet2 1.3.6.1.4.1.3085.3.1.6.5.4.1.8
A transform set used by this IKE Crypto Map.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionIKECryptoMapTransformSet3 1.3.6.1.4.1.3085.3.1.6.5.4.1.9
A transform set used by this IKE Crypto Map.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionIKECryptoMapTransformSet4 1.3.6.1.4.1.3085.3.1.6.5.4.1.10
A transform set used by this IKE Crypto Map.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionIKECryptoMapTransformSet5 1.3.6.1.4.1.3085.3.1.6.5.4.1.11
A transform set used by this IKE Crypto Map.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionIKECryptoMapTransformSet6 1.3.6.1.4.1.3085.3.1.6.5.4.1.12
A transform set used by this IKE Crypto Map.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionIKECryptoMapPolicy 1.3.6.1.4.1.3085.3.1.6.5.4.1.13
The IKE Policy used by this Crypto Map. This references an entry in csOrionIKEPolicyTable.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionIKECryptoMapLocalIdentity 1.3.6.1.4.1.3085.3.1.6.5.4.1.14
The Local IKE Identity for this Crypto Map entry. This can be either a hostname or an IP address (in dotted decimal format).
OBJECT-TYPE    
  LongDisplayString SIZE(0..512)  

csOrionIKECryptoMapSaLifetimeSoftSec 1.3.6.1.4.1.3085.3.1.6.5.4.1.15
The soft rekey interval lifetime in seconds used by this IKE Crypto Map Entry. This defines the period of time that elapses between ISAKMP phase II rekeys. This object is deprecated because its value is derived from csOrionIKECryptoMapSaLifetimeHardSec and is really not negotiated.
OBJECT-TYPE    
  Integer32 60..2147483647  

csOrionIKECryptoMapSaLifetimeSoftKbytes 1.3.6.1.4.1.3085.3.1.6.5.4.1.16
The soft rekey interval lifetime in kilobytes used by this IKE Crypto Map Entry. This defines the maximum amount of data transferred between ISAKMP phase II rekeys. This object is deprecated because its value is derived from csOrionIKECryptoMapSaLifetimeHardKbytes and is really not negotiated.
OBJECT-TYPE    
  Integer32 256..2147483647  

csOrionIKECryptoMapSaLifetimeHardSec 1.3.6.1.4.1.3085.3.1.6.5.4.1.17
The number of seconds that elapse before the SA is completely deleted. If this occurs on an active connection, a new ISAKMP negotiation starting at phase I takes place and a new SA is initiated. 0 is a special value and indicates that this particular Lifetime parameter is not to be conveyed to the remote side in any proposal that might be sent.
OBJECT-TYPE    
  Integer32 0 | 60..2147483647  

csOrionIKECryptoMapSaLifetimeHardKbytes 1.3.6.1.4.1.3085.3.1.6.5.4.1.18
The number of kilobytes transferred before the SA is completely deleted. 0 is a special value and indicates that this particular Lifetime parameter is not to be conveyed to the remote side in any proposal that might be sent.
OBJECT-TYPE    
  Integer32 0 | 256..2147483647  

csOrionIKECryptoMapStatus 1.3.6.1.4.1.3085.3.1.6.5.4.1.19
A row status type for the IKE Crypto Map.
OBJECT-TYPE    
  RowStatus  

csOrionIKECryptoMapType 1.3.6.1.4.1.3085.3.1.6.5.4.1.20
This object indicates if this IKE Crytomap is used as a regular crytomap or for dial-up. Its value is only set during creation. Therefore, it must not be modified once created.
OBJECT-TYPE    
  INTEGER isakmp(1), isakmpDialup(2)  

csOrionIKECryptoMapIdleTimeout 1.3.6.1.4.1.3085.3.1.6.5.4.1.21
The idle timeout in seconds of the dialup connection. This will be used only when the csOrionIKECryptoMapType is 'isakmpDialup' otherwise its value is zero. Setting this object to 0 will turn the timer off. The minimum valid timeout value for a dialup connection is 60, i.e., 1 minute.
OBJECT-TYPE    
  Integer32 0 | 60..2147483647  

csOrionIKECryptoMapLocalIdentityType 1.3.6.1.4.1.3085.3.1.6.5.4.1.22
The Local IKE Identity type for this Crypto Map entry. This has to be set together with csOrionIKECryptoMapLocalIdentity.
OBJECT-TYPE    
  INTEGER none(0), ipv4(1), distinguishedName(2), fqdn(3)  

csOrionIKECryptoMapRemoteIdentity1 1.3.6.1.4.1.3085.3.1.6.5.4.1.23
The remote IKE Identity for this Crypto Map entry. This can be either a hostname or an IP address (in dotted decimal format). In the case of IP address, the format is 'a.b.c.d/w.x.y.z', where a.b.c.d is the ip address and w.x.y.z is the address mask. If address mask is not specified, it is assumed to be 255.255.255.255. This is used by IKE to differentiate the remote end so as to determine which crypto map with the unique map priority is to be used. This has to be set together with csOrionIKECryptoMapRemoteIdentityType1.
OBJECT-TYPE    
  LongDisplayString SIZE(0..512)  

csOrionIKECryptoMapRemoteIdentity2 1.3.6.1.4.1.3085.3.1.6.5.4.1.24
The remote IKE Identity for this Crypto Map entry. This can be either a hostname or an IP address (in dotted decimal format). In the case of IP address, the format is 'a.b.c.d/w.x.y.z', where a.b.c.d is the ip address and w.x.y.z is the address mask. If address mask is not specified, it is assumed to be 255.255.255.255. This is used by IKE to differentiate the remote end so as to determine which crypto map with the unique map priority is to be used. This has to be set together with csOrionIKECryptoMapRemoteIdentityType2.
OBJECT-TYPE    
  LongDisplayString SIZE(0..512)  

csOrionIKECryptoMapRemoteIdentity3 1.3.6.1.4.1.3085.3.1.6.5.4.1.25
The remote IKE Identity for this Crypto Map entry. This can be either a hostname or an IP address (in dotted decimal format). In the case of IP address, the format is 'a.b.c.d/w.x.y.z', where a.b.c.d is the ip address and w.x.y.z is the address mask. If address mask is not specified, it is assumed to be 255.255.255.255. This is used by IKE to differentiate the remote end so as to determine which crypto map with the unique map priority is to be used. This has to be set together with csOrionIKECryptoMapRemoteIdentityType3.
OBJECT-TYPE    
  LongDisplayString SIZE(0..512)  

csOrionIKECryptoMapRemoteIdentity4 1.3.6.1.4.1.3085.3.1.6.5.4.1.26
The remote IKE Identity for this Crypto Map entry. This can be either a hostname or an IP address (in dotted decimal format). In the case of IP address, the format is 'a.b.c.d/w.x.y.z', where a.b.c.d is the ip address and w.x.y.z is the address mask. If address mask is not specified, it is assumed to be 255.255.255.255. This is used by IKE to differentiate the remote end so as to determine which crypto map with the unique map priority is to be used. This has to be set together with csOrionIKECryptoMapRemoteIdentityType4.
OBJECT-TYPE    
  LongDisplayString SIZE(0..512)  

csOrionIKECryptoMapRemoteIdentity5 1.3.6.1.4.1.3085.3.1.6.5.4.1.27
The remote IKE Identity for this Crypto Map entry. This can be either a hostname or an IP address (in dotted decimal format). In the case of IP address, the format is 'a.b.c.d/w.x.y.z', where a.b.c.d is the ip address and w.x.y.z is the address mask. If address mask is not specified, it is assumed to be 255.255.255.255. This is used by IKE to differentiate the remote end so as to determine which crypto map with the unique map priority is to be used. This has to be set together with csOrionIKECryptoMapRemoteIdentityType5.
OBJECT-TYPE    
  LongDisplayString SIZE(0..512)  

csOrionIKECryptoMapRemoteIdentityType1 1.3.6.1.4.1.3085.3.1.6.5.4.1.28
The remote IKE Identity type for this Crypto Map entry. This has to be set together with csOrionIKECryptoMapRemoteIdentity1.
OBJECT-TYPE    
  INTEGER none(0), ipv4(1), distinguishedName(2), fqdn(3)  

csOrionIKECryptoMapRemoteIdentityType2 1.3.6.1.4.1.3085.3.1.6.5.4.1.29
The remote IKE Identity type for this Crypto Map entry. This has to be set together with csOrionIKECryptoMapRemoteIdentity2.
OBJECT-TYPE    
  INTEGER none(0), ipv4(1), distinguishedName(2), fqdn(3)  

csOrionIKECryptoMapRemoteIdentityType3 1.3.6.1.4.1.3085.3.1.6.5.4.1.30
The remote IKE Identity type for this Crypto Map entry. This has to be set together with csOrionIKECryptoMapRemoteIdentity3.
OBJECT-TYPE    
  INTEGER none(0), ipv4(1), distinguishedName(2), fqdn(3)  

csOrionIKECryptoMapRemoteIdentityType4 1.3.6.1.4.1.3085.3.1.6.5.4.1.31
The remote IKE Identity type for this Crypto Map entry. This has to be set together with csOrionIKECryptoMapRemoteIdentity4.
OBJECT-TYPE    
  INTEGER none(0), ipv4(1), distinguishedName(2), fqdn(3)  

csOrionIKECryptoMapRemoteIdentityType5 1.3.6.1.4.1.3085.3.1.6.5.4.1.32
The remote IKE Identity type for this Crypto Map entry. This has to be set together with csOrionIKECryptoMapRemoteIdentity5.
OBJECT-TYPE    
  INTEGER none(0), ipv4(1), distinguishedName(2), fqdn(3)  

csOrionIKECryptoMapAddressPool 1.3.6.1.4.1.3085.3.1.6.5.4.1.33
This specifies whether IP address assignment is necessary for the remote dialup host and, if it is, how to obtain the address assignment. The following string values can be set: 'NONE' - means IP address assignment is not required for the remote dialup host 'AAA' - means the IP address is to be requested from an authentication or authorization server for the remote private IP address assignment - use the IP address in this address pool for the remote private IP address assignment; this name corresponds to csOrionIpLocalAddrPoolName, so the corresponding entry in csOrionIpLocalAddrPoolTable must have already existed. Applicable to ipsec-dialup crypto map only.
OBJECT-TYPE    
  DisplayString SIZE(1..80)  

csOrionIKECryptoMapDynamicRouteAdd 1.3.6.1.4.1.3085.3.1.6.5.4.1.34
If this object is set to true, IKE will dynamically load a static route when an SA is loaded. This static route will be used to route outgoing data packets to the tunnel VI for encryption to be sent to the remote ISDN network branches. IKE will also delete the route when the ISDN network SA pair is deleted. Note: This is implemented specifically for an ISDN network dialup. For the isakmp site-to-site tunnel, regular dialup tunnel and DSL dialup tunnel configurations, static routes for routing data packets to tunnel VI must be created manually instead of using this dynamic route addition capability, since this will degrade the IKE performance significantly, especially for regular and DSL dialup cases.
OBJECT-TYPE    
  TruthValue  

csOrionIKEPolicyTable 1.3.6.1.4.1.3085.3.1.6.5.5
A table for IKE Crypto Map.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionIKEPolicyEntry

csOrionIKEPolicyEntry 1.3.6.1.4.1.3085.3.1.6.5.5.1
Each entry contains a specific set of IKE Crypto Map for use by a Security Association.
OBJECT-TYPE    
  CsOrionIKEPolicyEntry  

csOrionIKEPolicyName 1.3.6.1.4.1.3085.3.1.6.5.5.1.1
The name assigned to this set of IKE Policies.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionIKEPolicyPriority 1.3.6.1.4.1.3085.3.1.6.5.5.1.2
The priority assigned to this IKE Policy Entry.
OBJECT-TYPE    
  Integer32 1..10000  

csOrionIKEPolicyHash 1.3.6.1.4.1.3085.3.1.6.5.5.1.3
The Hash algorithm employed by this IKE Policy Entry.
OBJECT-TYPE    
  INTEGER hmacMd5(1), hmacSha(2)  

csOrionIKEPolicyEncryption 1.3.6.1.4.1.3085.3.1.6.5.5.1.4
The Encryption algorithm employed by this IKE Policy Entry.
OBJECT-TYPE    
  INTEGER desCbc(1), tripleDesCbc(2)  

csOrionIKEPolicySaLifetimeSoftSec 1.3.6.1.4.1.3085.3.1.6.5.5.1.5
The soft rekey interval lifetime in seconds used by this IKE Crypto Map Entry. This defines the period of time that elapses between ISAKMP phase II rekeys. This object is deprecated because its value is derived from csOrionIKEPolicySaLifetimeHardSec and is really not negotiated.
OBJECT-TYPE    
  Integer32 60..2147483647  

csOrionIKEPolicySaLifetimeSoftKbytes 1.3.6.1.4.1.3085.3.1.6.5.5.1.6
The soft rekey interval lifetime in kilobytes used by this IKE Crypto Map Entry. This defines the maximum amount of data transferred between ISAKMP phase II rekeys. This object is deprecated because its value is derived from csOrionIKEPolicySaLifetimeHardKbytes and is really not negotiated.
OBJECT-TYPE    
  Integer32 256..2147483647  

csOrionIKEPolicySaLifetimeHardSec 1.3.6.1.4.1.3085.3.1.6.5.5.1.7
The number of seconds that elapse before the SA is completely deleted. If this occurs on an active connection, a new ISAKMP negotiation starting at phase I takes place and a new SA is initiated. 0 is a special value and indicates that this particular Lifetime parameter is not to be conveyed to the remote side in any proposal that might be sent.
OBJECT-TYPE    
  Integer32 0 | 60..2147483647  

csOrionIKEPolicySaLifetimeHardKbytes 1.3.6.1.4.1.3085.3.1.6.5.5.1.8
The number of kilobytes transferred before the SA is completely deleted. 0 is a special value and indicates that this particular Lifetime parameter is not to be conveyed to the remote side in any proposal that might be sent.
OBJECT-TYPE    
  Integer32 0 | 256..2147483647  

csOrionIKEPolicyAuthentication 1.3.6.1.4.1.3085.3.1.6.5.5.1.9
The Authentication algorithm employed by this Policy entry.
OBJECT-TYPE    
  INTEGER preShare(1), dssSig(2), rsaSig(3), methRsaEnc(4), methRsaEncRev(5), xauthInitPreShared(65001), xauthInitRsa(65005)  

csOrionIKEPolicyPfsGroup 1.3.6.1.4.1.3085.3.1.6.5.5.1.10
If one of the pfs features is enabled in csOrionIKECryptoMapFlags, this object is used to identify the Diffie-Helman group used for this IKE Crypto Map.
OBJECT-TYPE    
  INTEGER group1(1), group2(2), group5(5)  

csOrionIKEPolicyStatus 1.3.6.1.4.1.3085.3.1.6.5.5.1.11
A row status type for the IKE Policy Entry.
OBJECT-TYPE    
  RowStatus  

csOrionIKEPolicyAuthorizationTypeFlag 1.3.6.1.4.1.3085.3.1.6.5.5.1.12
Each bit within this object specifies the type of authorization to be enabled for IKE phase 1. options bit ------------------------------------------------------ certificate-presence 0 user-exists 1 enterprise-ID 2
OBJECT-TYPE    
  Integer32  

csOrionIKECertTable 1.3.6.1.4.1.3085.3.1.6.5.6
A table of Certificates.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionIKECertEntry

csOrionIKECertEntry 1.3.6.1.4.1.3085.3.1.6.5.6.1
Each entry contains a specific certificate.
OBJECT-TYPE    
  CsOrionIKECertEntry  

csOrionIKECertName 1.3.6.1.4.1.3085.3.1.6.5.6.1.1
The name assigned to this set of IKE Certificates.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionIKECertMapName 1.3.6.1.4.1.3085.3.1.6.5.6.1.2
The IKE Crypto Map referred to by this Cert entry.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionIKECertFlag 1.3.6.1.4.1.3085.3.1.6.5.6.1.3
Each bit within this object enables a specific feature within the Cert Table. Below is a list of the features and their corresponding bits identifiers. feature bit ------------------------------------------------------ no-crl 0 (more descriptions will follow).
OBJECT-TYPE    
  Integer32  

csOrionIKECertCertificate 1.3.6.1.4.1.3085.3.1.6.5.6.1.4
OBJECT-TYPE    
  OCTET STRING SIZE(0..1500)  

csOrionIKECertPrivateKey 1.3.6.1.4.1.3085.3.1.6.5.6.1.5
OBJECT-TYPE    
  OCTET STRING SIZE(0..1500)  

csOrionIKECertStatus 1.3.6.1.4.1.3085.3.1.6.5.6.1.6
A row status type for the IKE Cert Entry.
OBJECT-TYPE    
  RowStatus  

csOrionIKESvrParamTable 1.3.6.1.4.1.3085.3.1.6.5.7
A table of IKE Server Parameters in every VR.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionIKESvrParamEntry

csOrionIKESvrParamEntry 1.3.6.1.4.1.3085.3.1.6.5.7.1
Each entry contains parameter settings of an IKE server.
OBJECT-TYPE    
  CsOrionIKESvrParamEntry  

csOrionIKESvrParamMapName 1.3.6.1.4.1.3085.3.1.6.5.7.1.1
The map name for this server.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionIKESvrParamFlag 1.3.6.1.4.1.3085.3.1.6.5.7.1.2
Each bit within this object specifies the compatibility options that the server uses by default. Below is a list of the features and their corresponding bits identifiers. options bit ------------------------------------------------------ old-pk-encryption-prf-key 0 old-payload-padding 1 old-message-padding 2 old-da-padding 3 old-id-in-hash 4 ignore-cert-request-payload 5 old-cr-format 6 use-zero-spi 7 End of description.
OBJECT-TYPE    
  Unsigned32  

csOrionIKESvrParamIpAddress 1.3.6.1.4.1.3085.3.1.6.5.7.1.3
The address of the IKE server.
OBJECT-TYPE    
  IpAddress  

csOrionIKESvrParamPort 1.3.6.1.4.1.3085.3.1.6.5.7.1.4
The UDP port that the server is listening to.
OBJECT-TYPE    
  Integer32  

csOrionIKESvrParamRetryLimit 1.3.6.1.4.1.3085.3.1.6.5.7.1.5
Limits the number of ISAKMP packet transmission retries. The server retries the transmission if it does not receive a response in csOrionIKESvrParamRetryTimer seconds.
OBJECT-TYPE    
  Integer32  

csOrionIKESvrParamRetryTimer 1.3.6.1.4.1.3085.3.1.6.5.7.1.6
The amount of time, in seconds, that the server gives the remote end to reply to the sent request, before it will send the packet again. Fraction of a second must be specified in csOrionIKESvrParamRetryTimerMicroSec.
OBJECT-TYPE    
  Integer32  

csOrionIKESvrParamRetryTimerMicroSec 1.3.6.1.4.1.3085.3.1.6.5.7.1.7
The microseconds part of csOrionIKESvrParamRetryTimer.
OBJECT-TYPE    
  Integer32  

csOrionIKESvrParamRetryTimerMaximum 1.3.6.1.4.1.3085.3.1.6.5.7.1.8
Specifies the maximum value, in seconds, for the retry timer.
OBJECT-TYPE    
  Integer32  

csOrionIKESvrParamExpireTimer 1.3.6.1.4.1.3085.3.1.6.5.7.1.9
Specifies the maximum time, in seconds, that the IKE server allows a negotiation to continue.
OBJECT-TYPE    
  Integer32  

csOrionIKESvrParamSecretRecreate 1.3.6.1.4.1.3085.3.1.6.5.7.1.10
A local secret recreation timer expressed in seconds.
OBJECT-TYPE    
  Integer32  

csOrionIKESvrParamSPISize 1.3.6.1.4.1.3085.3.1.6.5.7.1.11
A compatibility flag that specifies the number of bytes of zero that can be used when the security parameter index (SPI) of an ISAKMP security association is sent to the remote end.
OBJECT-TYPE    
  Integer32  

csOrionIKESvrParamMaxKeyLength 1.3.6.1.4.1.3085.3.1.6.5.7.1.12
The maximum length of an encryption key, specified in bytes, that is accepted by the local end.
OBJECT-TYPE    
  Integer32  

csOrionIKESvrParamMaxSACount 1.3.6.1.4.1.3085.3.1.6.5.7.1.13
Limits the maximum number of ISAKMP SA entries.
OBJECT-TYPE    
  Integer32  

csOrionIKESvrParamLocalSecretSize 1.3.6.1.4.1.3085.3.1.6.5.7.1.14
The length of the local secrets, specified in bits.
OBJECT-TYPE    
  Integer32  

csOrionIKESvrParamTokenHashType 1.3.6.1.4.1.3085.3.1.6.5.7.1.15
A reference to an algorithm configuration block that defines the anti-clogging token hash algorithm.
OBJECT-TYPE    
  INTEGER md5(1), sha(2)  

csOrionIKESvrParamRowStatus 1.3.6.1.4.1.3085.3.1.6.5.7.1.16
A row status type for the IKE Server.
OBJECT-TYPE    
  RowStatus  

csOrionIKESvrParamAuthenticationList 1.3.6.1.4.1.3085.3.1.6.5.7.1.17
The name of the authentication server list that IKE uses for authentication services. If no listname is provided, the default authentication list of this VR will be used.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionIKESvrParamAuthorizationList 1.3.6.1.4.1.3085.3.1.6.5.7.1.18
The name of the authorization server list that IKE uses for authorization services. If no listname is provided, the default authorization list of this VR will be used.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionIKESvrParamAccountingList 1.3.6.1.4.1.3085.3.1.6.5.7.1.19
The name of the accounting server list that IKE uses for accounting services. If no listname is provided, the default accounting list of this VR will be used.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionIKESvrParamRadiusAcctUserTypePriority1 1.3.6.1.4.1.3085.3.1.6.5.7.1.20
Specifies the preferred user information to include in the RADIUS Accounting-Request User-Name attribute. Choices are: xauthUserId - xauth user login ID subjectAltName - subject alternative name from certificate distinguishedName - DN from certificate If the selected information is not available, IKE will try the type specified in csOrionIKESvrParamRadiusAcctUserTypePriority2.
OBJECT-TYPE    
  IKERadiusAcctUserType  

csOrionIKESvrParamRadiusAcctUserTypePriority2 1.3.6.1.4.1.3085.3.1.6.5.7.1.21
Specifies the user information to include in the RADIUS Accounting-Request User-Name attribute if the type specified in csOrionIKESvrParamRadiusAcctUserTypePriority1 is not available: xauthUserId - xauth user login ID subjectAltName - subject alternative name from certificate distinguishedName - DN from certificate If the selected information is not available, IKE will try the type specified in csOrionIKESvrParamRadiusAcctUserTypePriority3.
OBJECT-TYPE    
  IKERadiusAcctUserType  

csOrionIKESvrParamRadiusAcctUserTypePriority3 1.3.6.1.4.1.3085.3.1.6.5.7.1.22
Specifies the user information to include in the RADIUS Accounting-Request User-Name attribute if neither types specified in csOrionIKESvrParamRadiusAcctUserTypePriority1 and csOrionIKESvrParamRadiusAcctUserTypePriority2 are available: xauthUserId - xauth user login ID subjectAltName - subject alternative name from certificate distinguishedName - DN from certificate If the selected information is not available, IKE will include the assigned IP address in the user-name attribute.
OBJECT-TYPE    
  IKERadiusAcctUserType  

csOrionIpSecEvLogTable 1.3.6.1.4.1.3085.3.1.6.5.8
A table for Event Logging Control for IPSEC/IKE. NOTE: this table has been moved to {csOrionEncryptInfo 13} since it should be under VI level instead of VR level.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionIpSecEvLogEntry

csOrionIpSecEvLogEntry 1.3.6.1.4.1.3085.3.1.6.5.8.1
Each entry contains the event logging level and area for the IPSEC/IKE module on a virtual router.
OBJECT-TYPE    
  CsOrionIpSecEvLogEntry  

csOrionIpSecEvLogLevel 1.3.6.1.4.1.3085.3.1.6.5.8.1.1
This object is used to set the level of details for event logs for IPSEC/IKE.
OBJECT-TYPE    
  EvLogLevel  

csOrionIpSecEvLogArea 1.3.6.1.4.1.3085.3.1.6.5.8.1.2
This object is used to set the area of event logs for IPSEC/IKE.
OBJECT-TYPE    
  EvLogArea  

csOrionIpSecStatsTable 1.3.6.1.4.1.3085.3.1.6.5.9
The IPSEC Statistics table.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionIpSecStatsEntry

csOrionIpSecStatsEntry 1.3.6.1.4.1.3085.3.1.6.5.9.1
An entry containing IPSEC statistics information for this Virtual Interface.
OBJECT-TYPE    
  CsOrionIpSecStatsEntry  

csOrionIpSecStatsRcvAhPktsDropped 1.3.6.1.4.1.3085.3.1.6.5.9.1.1
The number of dropped packets that were AH encrypted and were received in this Virtual Interface.
OBJECT-TYPE    
  Counter64  

csOrionIpSecStatsRcvAhPktsBadAh 1.3.6.1.4.1.3085.3.1.6.5.9.1.2
The number of bad AH packets that are AH encrypted and are received in this Virtual Interface.
OBJECT-TYPE    
  Counter64  

csOrionIpSecStatsRcvAhPktsBadSpi 1.3.6.1.4.1.3085.3.1.6.5.9.1.3
The number of bad SPI packets that are AH encrypted and are received in this Virtual Interface.
OBJECT-TYPE    
  Counter64  

csOrionIpSecStatsRcvEspPktsDropped 1.3.6.1.4.1.3085.3.1.6.5.9.1.4
The number of dropped packets that were ESP encrypted and were received in this Virtual Interface.
OBJECT-TYPE    
  Counter64  

csOrionIpSecStatsRcvEspPktsBadEsp 1.3.6.1.4.1.3085.3.1.6.5.9.1.5
The number of bad ESP packets that are ESP encrypted and were received in this Virtual Interface.
OBJECT-TYPE    
  Counter64  

csOrionIpSecStatsRcvPktsOk 1.3.6.1.4.1.3085.3.1.6.5.9.1.6
The number of good packets received in this Virtual Interface.
OBJECT-TYPE    
  Counter64  

csOrionIpSecStatsTxPktsDenied 1.3.6.1.4.1.3085.3.1.6.5.9.1.7
The number of denied packets transmitted by this Virtual Interface.
OBJECT-TYPE    
  Counter64  

csOrionIpSecStatsEspTotalInboundSAs 1.3.6.1.4.1.3085.3.1.6.5.9.1.8
The total number of ESP encrypted inbound SAs for this Virtual Interface.
OBJECT-TYPE    
  Counter32  

csOrionIpSecStatsEspTotalInboundSAsFailed 1.3.6.1.4.1.3085.3.1.6.5.9.1.9
The total number of failed ESP encrypted inbound SAs for this Virtual Interface.
OBJECT-TYPE    
  Counter32  

csOrionIpSecStatsEspCurrentInboundSAs 1.3.6.1.4.1.3085.3.1.6.5.9.1.10
The current number of ESP encrypted inbound SAs for this Virtual Interface.
OBJECT-TYPE    
  Counter32  

csOrionIpSecStatsEspTotalOutboundSAs 1.3.6.1.4.1.3085.3.1.6.5.9.1.11
The total number of ESP encrypted outbound SAs for this Virtual Interface.
OBJECT-TYPE    
  Counter32  

csOrionIpSecStatsEspTotalOutboundSAsFailed 1.3.6.1.4.1.3085.3.1.6.5.9.1.12
The total number of failed ESP encrypted outbound SAs for this Virtual Interface.
OBJECT-TYPE    
  Counter32  

csOrionIpSecStatsEspCurrentOutboundSAs 1.3.6.1.4.1.3085.3.1.6.5.9.1.13
The current number of ESP encrypted outbound SAs for this Virtual Interface.
OBJECT-TYPE    
  Counter32  

csOrionIpSecStatsAhTotalInboundSAs 1.3.6.1.4.1.3085.3.1.6.5.9.1.14
The total number of AH encrypted inbound SAs for this Virtual Interface.
OBJECT-TYPE    
  Counter32  

csOrionIpSecStatsAhTotalInboundSAsFailed 1.3.6.1.4.1.3085.3.1.6.5.9.1.15
The total number of failed AH encrypted inbound SAs for this Virtual Interface.
OBJECT-TYPE    
  Counter32  

csOrionIpSecStatsAhCurrentInboundSAs 1.3.6.1.4.1.3085.3.1.6.5.9.1.16
The current number of AH encrypted inbound SAs for this Virtual Interface.
OBJECT-TYPE    
  Counter32  

csOrionIpSecStatsAhTotalOutboundSAs 1.3.6.1.4.1.3085.3.1.6.5.9.1.17
The total number of AH encrypted outbound SAs for this Virtual Interface.
OBJECT-TYPE    
  Counter32  

csOrionIpSecStatsAhTotalOutboundSAsFailed 1.3.6.1.4.1.3085.3.1.6.5.9.1.18
The total number of failed AH encrypted outbound SAs for this Virtual Interface.
OBJECT-TYPE    
  Counter32  

csOrionIpSecStatsAhCurrentOutboundSAs 1.3.6.1.4.1.3085.3.1.6.5.9.1.19
The current number of AH encrypted outbound SAs for this Virtual Interface.
OBJECT-TYPE    
  Counter32  

csOrionIpSecStatsEspCryptoCepEstablishOk 1.3.6.1.4.1.3085.3.1.6.5.9.1.20
The number of crypto ceps that are ESP encrypted sucessfully established in this Virtual Interface.
OBJECT-TYPE    
  Counter32  

csOrionIpSecStatsEspCryptoCepEstablishFailed 1.3.6.1.4.1.3085.3.1.6.5.9.1.21
The number of crypto ceps that are ESP encrypted failed to establish in this Virtual Interface.
OBJECT-TYPE    
  Counter32  

csOrionIpSecStatsAhCryptoCepEstablishOk 1.3.6.1.4.1.3085.3.1.6.5.9.1.22
The number of crypto ceps that are AH encrypted sucessfully established in this Virtual Interface.
OBJECT-TYPE    
  Counter32  

csOrionIpSecStatsAhCryptoCepEstablishFailed 1.3.6.1.4.1.3085.3.1.6.5.9.1.23
The number of crypto ceps that are AH encrypted failed to establish in this Virtual Interface.
OBJECT-TYPE    
  Counter32  

csOrionIpSecStatsEspEncryptPktsOk 1.3.6.1.4.1.3085.3.1.6.5.9.1.24
The number of good ESP encrypted packets in this Virtual Interface.
OBJECT-TYPE    
  Counter64  

csOrionIpSecStatsEspDecryptPktsOk 1.3.6.1.4.1.3085.3.1.6.5.9.1.25
The number of good ESP decrypted packets in this Virtual Interface.
OBJECT-TYPE    
  Counter64  

csOrionIpSecStatsAhEncryptPktsOk 1.3.6.1.4.1.3085.3.1.6.5.9.1.26
The number of good AH encrypted packets in this Virtual Interface.
OBJECT-TYPE    
  Counter64  

csOrionIpSecStatsAhDecryptPktsOk 1.3.6.1.4.1.3085.3.1.6.5.9.1.27
The number of good AH decrypted packets in this Virtual Interface.
OBJECT-TYPE    
  Counter64  

csOrionIpSecStatsEspEncryptPktsBad 1.3.6.1.4.1.3085.3.1.6.5.9.1.28
The number of bad ESP encrypted packets in this Virtual Interface.
OBJECT-TYPE    
  Counter64  

csOrionIpSecStatsEspDecryptPktsBad 1.3.6.1.4.1.3085.3.1.6.5.9.1.29
The number of bad ESP decrypted packets in this Virtual Interface.
OBJECT-TYPE    
  Counter64  

csOrionIpSecStatsAhEncryptPktsBad 1.3.6.1.4.1.3085.3.1.6.5.9.1.30
The number of bad AH encrypted packets in this Virtual Interface.
OBJECT-TYPE    
  Counter64  

csOrionIpSecStatsAhDecryptPktsBad 1.3.6.1.4.1.3085.3.1.6.5.9.1.31
The number of bad AH decrypted packets in this Virtual Interface.
OBJECT-TYPE    
  Counter64  

csOrionIKEStatsTable 1.3.6.1.4.1.3085.3.1.6.5.10
The IKE Statistics table.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionIKEStatsEntry

csOrionIKEStatsEntry 1.3.6.1.4.1.3085.3.1.6.5.10.1
An entry containing IKE statistics information for this Virtual Interface.
OBJECT-TYPE    
  CsOrionIKEStatsEntry  

csOrionIKEStatsPhase1Negotiations 1.3.6.1.4.1.3085.3.1.6.5.10.1.1
The number of IKE phase 1 negotiations in this Virtual Interface.
OBJECT-TYPE    
  Counter32  

csOrionIKEStatsPhase1NegotiationsFailed 1.3.6.1.4.1.3085.3.1.6.5.10.1.2
The number of Failed IKE phase 1 negotiations in this Virtual Interface.
OBJECT-TYPE    
  Counter32  

csOrionIKEStatsPhase1InPkts 1.3.6.1.4.1.3085.3.1.6.5.10.1.3
The number of IKE phase 1 packets received in this Virtual Interface.
OBJECT-TYPE    
  Counter32  

csOrionIKEStatsPhase1InPktsRejected 1.3.6.1.4.1.3085.3.1.6.5.10.1.4
The number of rejected IKE phase 1 packets received in this Virtual Interface.
OBJECT-TYPE    
  Counter32  

csOrionIKEStatsPhase1OutPkts 1.3.6.1.4.1.3085.3.1.6.5.10.1.5
The number of IKE phase 1 packets transmitted this Virtual Interface.
OBJECT-TYPE    
  Counter32  

csOrionIKEStatsPhase2Negotiations 1.3.6.1.4.1.3085.3.1.6.5.10.1.6
The number of IKE phase 2 negotiations in this Virtual Interface.
OBJECT-TYPE    
  Counter32  

csOrionIKEStatsPhase2NegotiationsFailed 1.3.6.1.4.1.3085.3.1.6.5.10.1.7
The number of Failed IKE phase 2 negotiations in this Virtual Interface.
OBJECT-TYPE    
  Counter32  

csOrionIKEStatsPhase2InPkts 1.3.6.1.4.1.3085.3.1.6.5.10.1.8
The number of IKE phase 2 packets received in this Virtual Interface.
OBJECT-TYPE    
  Counter32  

csOrionIKEStatsPhase2InPktsRejected 1.3.6.1.4.1.3085.3.1.6.5.10.1.9
The number of rejected IKE phase 2 packets received in this Virtual Interface.
OBJECT-TYPE    
  Counter32  

csOrionIKEStatsPhase2OutPkts 1.3.6.1.4.1.3085.3.1.6.5.10.1.10
The number of IKE phase 2 packets transmitted this Virtual Interface.
OBJECT-TYPE    
  Counter32  

csOrionIKEStateTable 1.3.6.1.4.1.3085.3.1.6.5.11
The IKE State table.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionIKEStateEntry

csOrionIKEStateEntry 1.3.6.1.4.1.3085.3.1.6.5.11.1
An entry containing IKE state information for this Virtual Interface.
OBJECT-TYPE    
  CsOrionIKEStateEntry  

csOrionIKEStateSAIndex 1.3.6.1.4.1.3085.3.1.6.5.11.1.1
A unique value, greater than zero, for each SA.
OBJECT-TYPE    
  Integer32 1..16960  

csOrionIKEStateLocalAddress 1.3.6.1.4.1.3085.3.1.6.5.11.1.2
The local IP address of this SA.
OBJECT-TYPE    
  IpAddress  

csOrionIKEStateRemoteAddress 1.3.6.1.4.1.3085.3.1.6.5.11.1.3
The remote IP address of this SA.
OBJECT-TYPE    
  IpAddress  

csOrionIKEStateInitRespondFlag 1.3.6.1.4.1.3085.3.1.6.5.11.1.4
Indicates if this SA is an initiator or a responder.
OBJECT-TYPE    
  INTEGER initiator(1), responder(2)  

csOrionIKEStateAuthenticationType 1.3.6.1.4.1.3085.3.1.6.5.11.1.5
The authentication type of this SA. It could be a certificate or a pre-shared key.
OBJECT-TYPE    
  INTEGER pre-shared-key(1), dss-signatures(2), rsa-signatures(3), rsa-encryption(4), rsa-encryption-revised(5), gss-api(6), xauth-init-pre-shared(65001), xauth-resp-pre-shared(65002), xauth-init-dss(65003), xauth-resp-dss(65004), xauth-init-rsa(65005), xauth-resp-rsa(65006), xauth-init-rsa-encryption(65007), xauth-resp-rsa-encryption(65008), xauth-init-rsa-revised-encryption(65009), xauth-resp-rsa-revised-encryption(65010)  

csOrionIKEStateCreationTime 1.3.6.1.4.1.3085.3.1.6.5.11.1.6
The creation time of this SA.
OBJECT-TYPE    
  TimeStamp  

csOrionIKEStateExpirationTime 1.3.6.1.4.1.3085.3.1.6.5.11.1.7
The expiration time of this SA.
OBJECT-TYPE    
  TimeStamp  

csOrionIKEStateNegotiations 1.3.6.1.4.1.3085.3.1.6.5.11.1.8
The number of phase 1 ISAKMP/IKE negotiations for this SA.
OBJECT-TYPE    
  Counter32  

csOrionIKEStateLastUsed 1.3.6.1.4.1.3085.3.1.6.5.11.1.9
The last time this SA was used.
OBJECT-TYPE    
  TimeStamp  

csOrionIKEStateBytesTransferred 1.3.6.1.4.1.3085.3.1.6.5.11.1.10
The number of bytes transferred by this SA.
OBJECT-TYPE    
  Counter32  

csOrionIKEStateCryptoAlgorithm 1.3.6.1.4.1.3085.3.1.6.5.11.1.11
The name of the crypto algorithm for this SA.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionIKEStateHashAlgorithm 1.3.6.1.4.1.3085.3.1.6.5.11.1.12
The name of the hash algorithm for this SA.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionIKEStatePrfAlgorithm 1.3.6.1.4.1.3085.3.1.6.5.11.1.13
The name of the PRF algorithm for this SA.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionIKEStateRetryLimit 1.3.6.1.4.1.3085.3.1.6.5.11.1.14
The limit of retry counts for this SA.
OBJECT-TYPE    
  Integer32  

csOrionIKEStateRetryTimer 1.3.6.1.4.1.3085.3.1.6.5.11.1.15
The retry interval in seconds. It indicates the duration from one retry to next retry for this SA. Fraction of a second must be specified in csOrionIKEStateRetryTimerMicroSec.
OBJECT-TYPE    
  Integer32  

csOrionIKEStateRetryTimerMicroSec 1.3.6.1.4.1.3085.3.1.6.5.11.1.16
The micro-second part of csOrionIKEStateRetryTimer.
OBJECT-TYPE    
  Integer32  

csOrionIKEStateMaxRetryDuration 1.3.6.1.4.1.3085.3.1.6.5.11.1.17
The maximum total retry duration for this SA. Fraction of a second must be specified in csOrionIKEStateMaxRetryDurationMicroSec.
OBJECT-TYPE    
  Integer32  

csOrionIKEStateMaxRetryDurationMicroSec 1.3.6.1.4.1.3085.3.1.6.5.11.1.18
The micro-second part of csOrionIKEStateMaxRetryDuration.
OBJECT-TYPE    
  Integer32  

csOrionIKEDialupConnTable 1.3.6.1.4.1.3085.3.1.6.5.12
A table of IKE dialup connection table.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionIKEDialupConnEntry

csOrionIKEDialupConnEntry 1.3.6.1.4.1.3085.3.1.6.5.12.1
Each entry contains a specific IKE dialup connection.
OBJECT-TYPE    
  CsOrionIKEDialupConnEntry  

csOrionIKEDialupConnIndex 1.3.6.1.4.1.3085.3.1.6.5.12.1.1
An index that uniquely identifies an entry in the IKE dialup connection table.
OBJECT-TYPE    
  Integer32 1..4000  

csOrionIKEDialupConnRemIpAddress 1.3.6.1.4.1.3085.3.1.6.5.12.1.2
IP address of the remote IpSec tunnel.
OBJECT-TYPE    
  IpAddress  

csOrionIKEDialupConnUserId 1.3.6.1.4.1.3085.3.1.6.5.12.1.3
Login ID of the dialup user, if the user uses Xauth. If Xauth is skipped, this will be an empty string.
OBJECT-TYPE    
  DisplayString SIZE(0..64)  

csOrionIKEDialupConnDistinguishName 1.3.6.1.4.1.3085.3.1.6.5.12.1.4
X.509 Distinguish Name of the dialup user, if the user uses certificates. For connection that does not use certificate, this will be an empty string.
OBJECT-TYPE    
  DisplayString  

csOrionIKEDialupConnRowStatus 1.3.6.1.4.1.3085.3.1.6.5.12.1.5
This object allows for deletion of a connection if it is set to 'destroy'. 'active' is not a valid value to set. Get on this object will always yield 'active'.
OBJECT-TYPE    
  INTEGER active(1), destroy(6)  

csOrionIpSecStateTable 1.3.6.1.4.1.3085.3.1.6.5.13
The IPSEC State table.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionIpSecStateEntry

csOrionIpSecStateEntry 1.3.6.1.4.1.3085.3.1.6.5.13.1
An entry containing IPSEC state information for this Virtual Interface.
OBJECT-TYPE    
  CsOrionIpSecStateEntry  

csOrionIpSecStateSAIndex 1.3.6.1.4.1.3085.3.1.6.5.13.1.1
A unique value, greater than zero, for each SA.
OBJECT-TYPE    
  Integer32 1..16960  

csOrionIpSecStateSpi 1.3.6.1.4.1.3085.3.1.6.5.13.1.2
The SPI is an arbitray 32-bit value that, in combintation with the destination IP address and security protocol(AH), uniquely identified the Security Association for this datagram.
OBJECT-TYPE    
  Unsigned32  

csOrionIpSecStateSAFlag 1.3.6.1.4.1.3085.3.1.6.5.13.1.3
A flag Containing info regarding this SA. The value of the flag is the combination of the following values: tunnel-only (1), transport-only (2), esp-rfc1827 (8), ah-rfc1826 (16), esp-rfc2045 (32), ah-rfc1828 (64), ah-rfc2202 (128) Giving an example: the value 33 represents tunnel + esp-rfc2045
OBJECT-TYPE    
  Integer32  

csOrionIpSecStateProtocol 1.3.6.1.4.1.3085.3.1.6.5.13.1.4
The protocol being used by this SA. This value is connected to General Access list protocol.
OBJECT-TYPE    
  INTEGER none(1), any(255)  

csOrionIpSecStatePort 1.3.6.1.4.1.3085.3.1.6.5.13.1.5
The port number of the protocol; this value is connected to General Access list port number.
OBJECT-TYPE    
  Integer32  

csOrionIpSecStateCreatorType 1.3.6.1.4.1.3085.3.1.6.5.13.1.6
The creator type of this SA.
OBJECT-TYPE    
  INTEGER manual(1), ike(2), dial-in(3)  

csOrionIpSecStateRemoteGateway 1.3.6.1.4.1.3085.3.1.6.5.13.1.7
The IP address of remote gateway.
OBJECT-TYPE    
  IpAddress  

csOrionIpSecStateLocalGateway 1.3.6.1.4.1.3085.3.1.6.5.13.1.8
The IP address of local gateway.
OBJECT-TYPE    
  IpAddress  

csOrionIpSecStateRemoteEndPoint 1.3.6.1.4.1.3085.3.1.6.5.13.1.9
The IP address of remote end point.
OBJECT-TYPE    
  IpAddress  

csOrionIpSecStateLocalEndPoint 1.3.6.1.4.1.3085.3.1.6.5.13.1.10
The IP address of local end point.
OBJECT-TYPE    
  IpAddress  

csOrionIpSecStateAlgorithmType 1.3.6.1.4.1.3085.3.1.6.5.13.1.11
The algorithm type of this SA.
OBJECT-TYPE    
  INTEGER ah-rfc1828(1), ah-hmac-rfc1828(2), ah-md5-hmac(3), ah-sha-hmac(4), esp-des-rfc1829(5), esp-3des-rfc1829(6), esp-des(7), esp-3des(8), esp-md5-hmac(10), esp-sha-hmac(11), esp3-md5-hmac(12), esp3-sha-hmac(13), other(14)  

csOrionIpSecStateSAType 1.3.6.1.4.1.3085.3.1.6.5.13.1.12
The type of this SA.
OBJECT-TYPE    
  INTEGER esp(1), ah(2), other(3)  

csOrionIpSecStateExpire 1.3.6.1.4.1.3085.3.1.6.5.13.1.13
Indicate when this SA will be dropped.
OBJECT-TYPE    
  TimeStamp  

csOrionIpSecStateLastUsed 1.3.6.1.4.1.3085.3.1.6.5.13.1.14
The last time this SA was used.
OBJECT-TYPE    
  TimeStamp  

csOrionIpSecStateDirection 1.3.6.1.4.1.3085.3.1.6.5.13.1.15
The sending and receiving direction of this SA.
OBJECT-TYPE    
  INTEGER ipsec-sa-send(1), ipsec-sa-rcv(2)  

csOrionIpSecStateEncryptionAlgorithm 1.3.6.1.4.1.3085.3.1.6.5.13.1.16
The name of the encryption algorithm for this SA.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionIpSecStateHashAlgorithm 1.3.6.1.4.1.3085.3.1.6.5.13.1.17
The name of the hash algorithm for this SA.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionIpSecEventLogTable 1.3.6.1.4.1.3085.3.1.6.5.14
A table for Event Logging Control for IPSEC/IKE.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionIpSecEventLogEntry

csOrionIpSecEventLogEntry 1.3.6.1.4.1.3085.3.1.6.5.14.1
Each entry contains the event logging level and area for the IPSEC/IKE module on a virtual router.
OBJECT-TYPE    
  CsOrionIpSecEventLogEntry  

csOrionIpSecEventLogLevel 1.3.6.1.4.1.3085.3.1.6.5.14.1.1
This object is used to set the level of details for event logs for IPSEC/IKE.
OBJECT-TYPE    
  EvLogLevel  

csOrionIpSecEventLogArea 1.3.6.1.4.1.3085.3.1.6.5.14.1.2
This object is used to set the area of event logs for IPSEC/IKE.
OBJECT-TYPE    
  EvLogArea  

csOrionEncryptInfoEnd 1.3.6.1.4.1.3085.3.1.6.5.15
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionQueueInfo 1.3.6.1.4.1.3085.3.1.6.6
OBJECT IDENTIFIER    

csOrionVncQueueTable 1.3.6.1.4.1.3085.3.1.6.6.1
A list of VNC Queues for each Virtual Interfaces. Each queue is assigned a minimum and maximum bandwidth.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionVncQueueEntry

csOrionVncQueueEntry 1.3.6.1.4.1.3085.3.1.6.6.1.1
An entry containing management information applicable to a particular virtual interface's vnc queue.
OBJECT-TYPE    
  CsOrionVncQueueEntry  

csOrionVncQueueId 1.3.6.1.4.1.3085.3.1.6.6.1.1.1
The Id of this particular queue.
OBJECT-TYPE    
  Integer32  

csOrionVncQueueAclId 1.3.6.1.4.1.3085.3.1.6.6.1.1.2
The Id of an access list entry (from csOrionGenAclTable). All packets transmitted on this virtual that satisfy that access list entry are placed in this queue.
OBJECT-TYPE    
  Integer32  

csOrionVncQueueMinBw 1.3.6.1.4.1.3085.3.1.6.6.1.1.3
The minimum bandwidth allocated to this queue.
OBJECT-TYPE    
  Integer32  

csOrionVncQueueMaxBw 1.3.6.1.4.1.3085.3.1.6.6.1.1.4
The maximum bandwidth allocated to this queue.
OBJECT-TYPE    
  Integer32  

csOrionVncQueueRowStatus 1.3.6.1.4.1.3085.3.1.6.6.1.1.5
A row status type for this Rate Allocation Queue.
OBJECT-TYPE    
  RowStatus  

csOrionPppInfo 1.3.6.1.4.1.3085.3.1.6.7
OBJECT IDENTIFIER    

csOrionPppConfigTable 1.3.6.1.4.1.3085.3.1.6.7.1
This table contains general PPP configuration parameters.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionPppConfigEntry

csOrionPppConfigEntry 1.3.6.1.4.1.3085.3.1.6.7.1.1
Each entry represents the PPP configuration parameters for a single Virtual Router.
OBJECT-TYPE    
  CsOrionPppConfigEntry  

csOrionPppConfigHostname 1.3.6.1.4.1.3085.3.1.6.7.1.1.1
The name of this Virtual Router used during pap/chap authentication.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionPppIfConfigTable 1.3.6.1.4.1.3085.3.1.6.7.2
This table contains interface-specific PPP configuration parameters.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionPppIfConfigEntry

csOrionPppIfConfigEntry 1.3.6.1.4.1.3085.3.1.6.7.2.1
Each entry represents the PPP interface-specific configuration parameters for a single Logical Interface.
OBJECT-TYPE    
  CsOrionPppIfConfigEntry  

csOrionPppIfSlotIndex 1.3.6.1.4.1.3085.3.1.6.7.2.1.1
The Slot Id of this Logical Interface.
OBJECT-TYPE    
  Integer32 1..64  

csOrionPppIfModuleIndex 1.3.6.1.4.1.3085.3.1.6.7.2.1.2
The Module Index of this Logical Interface.
OBJECT-TYPE    
  Integer32 1..64  

csOrionPppIfPortIndex 1.3.6.1.4.1.3085.3.1.6.7.2.1.3
The Port Id of this Logical Interface.
OBJECT-TYPE    
  Integer32 1..64  

csOrionPppIfChIndex 1.3.6.1.4.1.3085.3.1.6.7.2.1.4
The Channel Id of this Logical Interface. Channel is 0 if this object is in the Unchannelized DS3/E3 or ATM PVC.
OBJECT-TYPE    
  Integer32 0..64  

csOrionPppIfSubIfIndex 1.3.6.1.4.1.3085.3.1.6.7.2.1.5
The identifier for this logical interface. This corresponds to the 'subinterface' entered via the CLI. A sub-if 0 will be used for PPP objects other than in PPP over ATM.
OBJECT-TYPE    
  Integer32 0..2147483647  

csOrionPppIfConfigAuth 1.3.6.1.4.1.3085.3.1.6.7.2.1.6
The type of authentication used by PPP over this Logical Interface.
OBJECT-TYPE    
  INTEGER none(1), pap(2), chapmd5(3), mschapv1Server(4), mschapv2Server(5)  

csOrionPppIfEncryption 1.3.6.1.4.1.3085.3.1.6.7.2.1.7
NOTE: This object has been obsoleted.
OBJECT-TYPE    
  INTEGER none(1), weak(2), strong(3)  

csOrionPppIfEncryptionMode 1.3.6.1.4.1.3085.3.1.6.7.2.1.8
NOTE: This object has been obsoleted.
OBJECT-TYPE    
  INTEGER stateful(1), stateless(2)  

csOrionPppIfRetransmit 1.3.6.1.4.1.3085.3.1.6.7.2.1.9
The maximum number of PPP retransmissions attempted on this Logical Interface.
OBJECT-TYPE    
  Integer32 1..64  

csOrionPppIfConfigReqRtx 1.3.6.1.4.1.3085.3.1.6.7.2.1.10
The maximum number of PPP configuration request retransmissions attempted on this Logical Interface.
OBJECT-TYPE    
  Integer32 0..64  

csOrionPppIfTerminateReqRtx 1.3.6.1.4.1.3085.3.1.6.7.2.1.11
The maximum number of PPP terminate request retransmissions attempted on this Logical Interface.
OBJECT-TYPE    
  Integer32 0..64  

csOrionPppIfTimeout 1.3.6.1.4.1.3085.3.1.6.7.2.1.12
The amount of time (in seconds) between retransmit attempts on this Logical Interface.
OBJECT-TYPE    
  Integer32 1..64  

csOrionPppIfReauth 1.3.6.1.4.1.3085.3.1.6.7.2.1.13
The amount of time (in seconds) between re-authentication requests on an established PPP connection on this Logical Interface. The value 0 disabled re-authentication.
OBJECT-TYPE    
  Integer32 0..65535  

csOrionPppIfAdminStatus 1.3.6.1.4.1.3085.3.1.6.7.2.1.14
This object is used to enable/disable the PPP.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOrionPppIfOperStatus 1.3.6.1.4.1.3085.3.1.6.7.2.1.15
The operational status for this interface.
OBJECT-TYPE    
  OperStatus  

csOrionPppIfEvLogLevel 1.3.6.1.4.1.3085.3.1.6.7.2.1.16
This object is used to set the level of details for event logs for PPP. Events with level higher than this object will not be logged.
OBJECT-TYPE    
  EvLogLevel  

csOrionPppIfEvLogArea 1.3.6.1.4.1.3085.3.1.6.7.2.1.17
This object is used to set the area of event logs for PPP. Events which area is not specified in this object will not be logged.
OBJECT-TYPE    
  EvLogArea  

csOrionPppIfEchoTimeout 1.3.6.1.4.1.3085.3.1.6.7.2.1.18
The echo timeout (keepalive) in seconds.
OBJECT-TYPE    
  Integer32 0..65535  

csOrionPppRemoteUserTable 1.3.6.1.4.1.3085.3.1.6.7.3
This table contains remote username/password pairs. This database is used to authenticate remote users via PAP or CHAP.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionPppRemoteUserEntry

csOrionPppRemoteUserEntry 1.3.6.1.4.1.3085.3.1.6.7.3.1
Each entry represents a single username, password pair.
OBJECT-TYPE    
  CsOrionPppRemoteUserEntry  

csOrionPppRemoteUserName 1.3.6.1.4.1.3085.3.1.6.7.3.1.1
The name of a remote user.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionPppRemoteUserPassword 1.3.6.1.4.1.3085.3.1.6.7.3.1.2
The password of a remote user.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionPppRemoteUserRowStatus 1.3.6.1.4.1.3085.3.1.6.7.3.1.3
The RowStatus object for this table.
OBJECT-TYPE    
  RowStatus  

csOrionPppRemoteUserConnProfile 1.3.6.1.4.1.3085.3.1.6.7.3.1.4
The connection profile for this user. Refer to csOrionConnectionProfileName object.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionPppInfoEnd 1.3.6.1.4.1.3085.3.1.6.7.4
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionPptpInfo 1.3.6.1.4.1.3085.3.1.6.8
OBJECT IDENTIFIER    

csOrionPptpConfTable 1.3.6.1.4.1.3085.3.1.6.8.1
This table contains general Pptp Configuration parameters.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionPptpConfEntry

csOrionPptpConfEntry 1.3.6.1.4.1.3085.3.1.6.8.1.1
Each entry represents a set of Pptp configuration for a single Virtual Router.
OBJECT-TYPE    
  CsOrionPptpConfEntry  

csOrionPptpConfStatus 1.3.6.1.4.1.3085.3.1.6.8.1.1.1
This object enables or disables the PPTP Server on this Virtual Router.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

csOrionPptpConfMaxConn 1.3.6.1.4.1.3085.3.1.6.8.1.1.2
The maximum number of simultaneous Pptp connections supported by this Virtual Router.
OBJECT-TYPE    
  Integer32 1..65535  

csOrionPptpConfIdleTimeout 1.3.6.1.4.1.3085.3.1.6.8.1.1.3
The amount of time the Pptp server allows a connection to remain idle. A value 0 would mean no timeout.
OBJECT-TYPE    
  Integer32 0..65535  

csOrionPptpConfPPPKeepAliveInterval 1.3.6.1.4.1.3085.3.1.6.8.1.1.4
The timeout interval value the PPTP connection uses to send PPP keepalive requests. A value 0 would mean no timeout.
OBJECT-TYPE    
  Integer32 0..65535  

csOrionPptpConfEncryption 1.3.6.1.4.1.3085.3.1.6.8.1.1.5
The type of encryption used by PPTP Server on this Virtual Router.
OBJECT-TYPE    
  INTEGER none(1), weak(2), strong(3)  

csOrionPptpConfAuthentication 1.3.6.1.4.1.3085.3.1.6.8.1.1.6
The type of authentication used by PPTP Server on this Virtual Router.
OBJECT-TYPE    
  INTEGER none(1), pap(2), chapmd5(3), mschapv1Server(4), mschapv2Server(5)  

csOrionPptpConfIpPool 1.3.6.1.4.1.3085.3.1.6.8.1.1.7
This object identifies the Ip Local Address Pool that should be used by this PPTP Server to assign addresses to dynamic PPTP connections.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionPptpConnTable 1.3.6.1.4.1.3085.3.1.6.8.2
This table identifies all the current Pptp connections on this Virtual Router.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionPptpConnEntry

csOrionPptpConnEntry 1.3.6.1.4.1.3085.3.1.6.8.2.1
Each entry represents a single Pptp connection.
OBJECT-TYPE    
  CsOrionPptpConnEntry  

csOrionPptpConnFarIpAddr 1.3.6.1.4.1.3085.3.1.6.8.2.1.1
This object identifies the far end of a Pptp connection.
OBJECT-TYPE    
  IpAddress  

csOrionPptpConnLocalIpAddr 1.3.6.1.4.1.3085.3.1.6.8.2.1.2
This object identifies the local end of a Pptp connection.
OBJECT-TYPE    
  IpAddress  

csOrionPptpConnAge 1.3.6.1.4.1.3085.3.1.6.8.2.1.3
The age (in seconds) of this Pptp connection.
OBJECT-TYPE    
  Integer32 1..65535  

csOrionPptpConnStatus 1.3.6.1.4.1.3085.3.1.6.8.2.1.4
This object can be used to remove a Pptp connection by setting the value to disabled.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

csOrionPptpConnFarUsername 1.3.6.1.4.1.3085.3.1.6.8.2.1.5
This is the username on the other end of the connection.
OBJECT-TYPE    
  DisplayString SIZE(1..80)  

csOrionPptpInfoEnd 1.3.6.1.4.1.3085.3.1.6.8.3
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionRadiusInfo 1.3.6.1.4.1.3085.3.1.6.9
OBJECT IDENTIFIER    

csOrionVrRadiusConfigTable 1.3.6.1.4.1.3085.3.1.6.9.1
This table contains Radius configuration parameters. This table is obsoleted as of release 3.0 in favor of csOrionAAAServerConfigTable and csOrionAAAServerListConfigTable.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionVrRadiusConfigEntry

csOrionVrRadiusConfigEntry 1.3.6.1.4.1.3085.3.1.6.9.1.1
Each entry represents the Radius configuration parameters for a single VR.
OBJECT-TYPE    
  CsOrionVrRadiusConfigEntry  

csOrionVrRadiusRetransmit 1.3.6.1.4.1.3085.3.1.6.9.1.1.1
The number of times a Radius Server will be queried before moving to the next Radius Server in the list identified by csOrionVrRadiusList.
OBJECT-TYPE    
  Integer32 0..64  

csOrionVrRadiusTimeout 1.3.6.1.4.1.3085.3.1.6.9.1.1.2
The amount of time (in seconds) this Virtual Router will wait for a Radius Server before timing out.
OBJECT-TYPE    
  Integer32 1..128  

csOrionVrRadiusSvrTable 1.3.6.1.4.1.3085.3.1.6.9.2
A list of RADIUS authentication servers. This table is obsoleted as of release 3.0 in favor of csOrionAAAServerConfigTable and csOrionAAAServerListConfigTable.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionVrRadiusSvrEntry

csOrionVrRadiusSvrEntry 1.3.6.1.4.1.3085.3.1.6.9.2.1
An entry containing management information applicable to a particular RADIUS Server.
OBJECT-TYPE    
  CsOrionVrRadiusSvrEntry  

csOrionVrRadiusSvrPriority 1.3.6.1.4.1.3085.3.1.6.9.2.1.1
The relative priority of this RADIUS server in this list.
OBJECT-TYPE    
  Integer32 1..100  

csOrionVrRadiusSvrAddress 1.3.6.1.4.1.3085.3.1.6.9.2.1.2
The IP address of this RADIUS server in this list.
OBJECT-TYPE    
  IpAddress  

csOrionVrRadiusSvrKey 1.3.6.1.4.1.3085.3.1.6.9.2.1.3
The authentication and encryption key used for all Radius communication between the Virtual Router and this Radius Server.
OBJECT-TYPE    
  OCTET STRING SIZE(0..255)  

csOrionVrRadiusSvrRowStatus 1.3.6.1.4.1.3085.3.1.6.9.2.1.4
The Admin Status type for this entry in the Radius Server Table.
OBJECT-TYPE    
  RowStatus  

csOrionVrRadiusSvrOperStatus 1.3.6.1.4.1.3085.3.1.6.9.2.1.5
The operational status for this entry in the Radius Server Table.
OBJECT-TYPE    
  OperStatus  

csOrionVrRadiusSvrPort 1.3.6.1.4.1.3085.3.1.6.9.2.1.6
Radius client uses the default port 1812 for AA requests. This will not work with the old radius servers which uses 1645 for AA requests. To support the old port, we throw in this extra parameter.
OBJECT-TYPE    
  Integer32 0..65535  

csOrionVrRadiusAcctSvrTable 1.3.6.1.4.1.3085.3.1.6.9.3
A list of RADIUS accounting servers. This table is obsoleted as of release 3.0 in favor of csOrionAAAServerConfigTable and csOrionAAAServerListConfigTable.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionVrRadiusAcctSvrEntry

csOrionVrRadiusAcctSvrEntry 1.3.6.1.4.1.3085.3.1.6.9.3.1
An entry containing management information applicable to a particular RADIUS Accounting Server.
OBJECT-TYPE    
  CsOrionVrRadiusAcctSvrEntry  

csOrionVrRadiusAcctSvrPriority 1.3.6.1.4.1.3085.3.1.6.9.3.1.1
The relative priority of this RADIUS accounting server in this list.
OBJECT-TYPE    
  Integer32 1..100  

csOrionVrRadiusAcctSvrAddress 1.3.6.1.4.1.3085.3.1.6.9.3.1.2
The IP address of this RADIUS accounting server in this list.
OBJECT-TYPE    
  IpAddress  

csOrionVrRadiusAcctSvrKey 1.3.6.1.4.1.3085.3.1.6.9.3.1.3
The authentication and encryption key used for all Radius communication between the Virtual Router and this Radius Accounting Server.
OBJECT-TYPE    
  OCTET STRING SIZE(0..255)  

csOrionVrRadiusAcctSvrRowStatus 1.3.6.1.4.1.3085.3.1.6.9.3.1.4
The Admin Status type for this entry in the Radius Accounting Server Table.
OBJECT-TYPE    
  RowStatus  

csOrionVrRadiusAcctSvrOperStatus 1.3.6.1.4.1.3085.3.1.6.9.3.1.5
The operational status for this entry in the Radius Accounting Server Table.
OBJECT-TYPE    
  OperStatus  

csOrionVrRadiusAcctSvrPort 1.3.6.1.4.1.3085.3.1.6.9.3.1.6
Radius client uses the default port 1813 for ACCT requests. This will not work with the old radius servers which uses 1646 for ACCT requests. To support the old port, we throw in this extra parameter.
OBJECT-TYPE    
  Integer32 0..65535  

csOrionRadiusInfoEnd 1.3.6.1.4.1.3085.3.1.6.9.4
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionDNSInfo 1.3.6.1.4.1.3085.3.1.6.10
OBJECT IDENTIFIER    

csOrionVrDnsConfigTable 1.3.6.1.4.1.3085.3.1.6.10.1
This table contains DNS configuration parameters.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionVrDnsConfigEntry

csOrionVrDnsConfigEntry 1.3.6.1.4.1.3085.3.1.6.10.1.1
Each entry represents the DNS configuration parameters for a single VR.
OBJECT-TYPE    
  CsOrionVrDnsConfigEntry  

csOrionVrPrimaryDnsServer 1.3.6.1.4.1.3085.3.1.6.10.1.1.1
The primary DNS server for this VR.
OBJECT-TYPE    
  IpAddress  

csOrionVrSecondaryDnsServer 1.3.6.1.4.1.3085.3.1.6.10.1.1.2
The secondary DNS server for this VR.
OBJECT-TYPE    
  IpAddress  

csOrionDNSInfoEnd 1.3.6.1.4.1.3085.3.1.6.10.2
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionCiscoHdlcInfo 1.3.6.1.4.1.3085.3.1.6.11
OBJECT IDENTIFIER    

csOrionCiscoHdlcConfigTable 1.3.6.1.4.1.3085.3.1.6.11.1
This table contains configuration parameters for Cisco HDLC.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionCiscoHdlcConfigEntry

csOrionCiscoHdlcConfigEntry 1.3.6.1.4.1.3085.3.1.6.11.1.1
Each entry represents the Cisco HDLC interface-specific configuration parameters for a single interface.
OBJECT-TYPE    
  CsOrionCiscoHdlcConfigEntry  

csOrionCiscoHdlcSlotIndex 1.3.6.1.4.1.3085.3.1.6.11.1.1.1
The Slot Id of this interface.
OBJECT-TYPE    
  Integer32 1..64  

csOrionCiscoHdlcModuleIndex 1.3.6.1.4.1.3085.3.1.6.11.1.1.2
The Module Id of this interface.
OBJECT-TYPE    
  Integer32 1..64  

csOrionCiscoHdlcPortIndex 1.3.6.1.4.1.3085.3.1.6.11.1.1.3
The Port Id of this interface.
OBJECT-TYPE    
  Integer32 1..64  

csOrionCiscoHdlcChIndex 1.3.6.1.4.1.3085.3.1.6.11.1.1.4
The Channel Id of this interface. Channel is 0 if this object is in the Unchannelized DS3.
OBJECT-TYPE    
  Integer32 0..64  

csOrionCiscoHdlcSlarpKeepAlive 1.3.6.1.4.1.3085.3.1.6.11.1.1.5
The interval, in second, between keep alive packets.
OBJECT-TYPE    
  Integer32 1..2147483647  

csOrionCiscoHdlcOperStatus 1.3.6.1.4.1.3085.3.1.6.11.1.1.6
The operational status of this table.
OBJECT-TYPE    
  OperStatus  

csOrionCiscoHdlcAdminStatus 1.3.6.1.4.1.3085.3.1.6.11.1.1.7
This object is used to enable/disable the Cisco HDLC.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOrionCiscoHdlcInfoEnd 1.3.6.1.4.1.3085.3.1.6.11.2
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionFRoIPInfo 1.3.6.1.4.1.3085.3.1.6.12
OBJECT IDENTIFIER    

csOrionFRoIPConfTable 1.3.6.1.4.1.3085.3.1.6.12.1
This table contains general FRoIP Configuration parameters.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionFRoIPConfEntry

csOrionFRoIPConfEntry 1.3.6.1.4.1.3085.3.1.6.12.1.1
Each entry represents a set of FRoIPconfiguration for a Virtual Router. There is only one instance of FRoIP on a Virtual Router. An entry is created with IP address and default values for all the other objects when a VR is created. Creation of row by Network Management Stations is not allowed.
OBJECT-TYPE    
  CsOrionFRoIPConfEntry  

csOrionFRoIPVIfaceId 1.3.6.1.4.1.3085.3.1.6.12.1.1.1
OBJECT-TYPE    
  Integer32  

csOrionFRoIPConfMaxPeer 1.3.6.1.4.1.3085.3.1.6.12.1.1.2
OBJECT-TYPE    
  Integer32 1..1024  

csOrionFRoIPConfDefaultWindowSize 1.3.6.1.4.1.3085.3.1.6.12.1.1.3
OBJECT-TYPE    
  Integer32 0..256  

csOrionFRoIPConfDefaultWindowTimeout 1.3.6.1.4.1.3085.3.1.6.12.1.1.4
OBJECT-TYPE    
  Integer32 10..25000  

csOrionFRoIPConfDefaultServiceSlot 1.3.6.1.4.1.3085.3.1.6.12.1.1.5
This object identifies the slot that all new transports created off this base inherit.
OBJECT-TYPE    
  Integer32 1..26  

csOrionFRoIPConfNumActiveTransports 1.3.6.1.4.1.3085.3.1.6.12.1.1.6
OBJECT-TYPE    
  Integer32  

csOrionFRoIPAdminStatus 1.3.6.1.4.1.3085.3.1.6.12.1.1.7
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOrionFRoIPOperStatus 1.3.6.1.4.1.3085.3.1.6.12.1.1.8
OBJECT-TYPE    
  OperStatus  

csOrionFRoIPTransportTable 1.3.6.1.4.1.3085.3.1.6.12.2
This table contains transport related objects of FRoIP.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionFRoIPTransportEntry

csOrionFRoIPTransportEntry 1.3.6.1.4.1.3085.3.1.6.12.2.1
Each entry represents a set of transport related objects of FRoIP on a Virtual Router.
OBJECT-TYPE    
  CsOrionFRoIPTransportEntry  

csOrionFRoIPTransportPeer 1.3.6.1.4.1.3085.3.1.6.12.2.1.1
OBJECT-TYPE    
  IpAddress  

csOrionFRoIPTransportMode 1.3.6.1.4.1.3085.3.1.6.12.2.1.2
OBJECT-TYPE    
  INTEGER active(1), passive(2)  

csOrionFRoIPTransportWindowSize 1.3.6.1.4.1.3085.3.1.6.12.2.1.3
OBJECT-TYPE    
  Integer32 0..256  

csOrionFRoIPTransportWindowTimeout 1.3.6.1.4.1.3085.3.1.6.12.2.1.4
In milliseconds
OBJECT-TYPE    
  Integer32 10..25000  

csOrionFRoIPTransportKeepAlive 1.3.6.1.4.1.3085.3.1.6.12.2.1.5
OBJECT-TYPE    
  Integer32 3..30  

csOrionFRoIPTransportEventWindowSize 1.3.6.1.4.1.3085.3.1.6.12.2.1.6
OBJECT-TYPE    
  Integer32 1..10  

csOrionFRoIPTransportPermittedBadEvents 1.3.6.1.4.1.3085.3.1.6.12.2.1.7
OBJECT-TYPE    
  Integer32 1..10  

csOrionFRoIPTransportDefaultSlot 1.3.6.1.4.1.3085.3.1.6.12.2.1.8
OBJECT-TYPE    
  Integer32 1..26  

csOrionFRoIPTransportOutPkts 1.3.6.1.4.1.3085.3.1.6.12.2.1.9
OBJECT-TYPE    
  Counter32  

csOrionFRoIPTransportInPkts 1.3.6.1.4.1.3085.3.1.6.12.2.1.10
OBJECT-TYPE    
  Counter32  

csOrionFRoIPTransportOutBytes 1.3.6.1.4.1.3085.3.1.6.12.2.1.11
OBJECT-TYPE    
  Counter32  

csOrionFRoIPTransportInBytes 1.3.6.1.4.1.3085.3.1.6.12.2.1.12
OBJECT-TYPE    
  Counter32  

csOrionFRoIPTransportRowStatus 1.3.6.1.4.1.3085.3.1.6.12.2.1.13
OBJECT-TYPE    
  RowStatus  

csOrionFRoIPTransportAdminStatus 1.3.6.1.4.1.3085.3.1.6.12.2.1.14
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOrionFRoIPTransportOperStatus 1.3.6.1.4.1.3085.3.1.6.12.2.1.15
OBJECT-TYPE    
  OperStatus  

csFRoIPCircuitTable 1.3.6.1.4.1.3085.3.1.6.12.3
A table containing information about virtual circuits corresponding to FRoIP Transports..
OBJECT-TYPE    
  SEQUENCE OF  
    CsFRoIPCircuitEntry

csFRoIPCircuitEntry 1.3.6.1.4.1.3085.3.1.6.12.3.1
The information regarding a single Data Link Connection. Discontinuities in the counters contained in this table are indicated by the value in csFrCircuitCreationTime.
OBJECT-TYPE    
  CsFRoIPCircuitEntry  

csFRoIPCircuitDlci 1.3.6.1.4.1.3085.3.1.6.12.3.1.1
The Data Link Connection Identifier for this virtual circuit. Note, this impelemtation supports only values between 16 and 1023 (inclusive).
OBJECT-TYPE    
  DLCI  

csFRoIPCircuitState 1.3.6.1.4.1.3085.3.1.6.12.3.1.2
Indicates whether the particular virtual circuit is operational. In the absence of a Data Link Connection Management Interface, virtual circuit entries (rows) may be created by setting virtual circuit state to 'active', or deleted by changing Circuit state to 'invalid'. Whether or not the row actually disappears is left to the implementation, so this object may actually read as 'invalid' for some arbitrary length of time. It is also legal to set the state of a virtual circuit to 'inactive' to temporarily disable a given circuit. The use of 'invalid' is deprecated in this SNMP Version 2 MIB, in favor of csFRoIPCircuitRowStatus.
OBJECT-TYPE    
  INTEGER invalid(1), active(2), inactive(3)  

csFRoIPCircuitReceivedFECNs 1.3.6.1.4.1.3085.3.1.6.12.3.1.3
Number of frames received from the network indicating forward congestion since the virtual circuit was created. This occurs when the remote DTE sets the FECN flag, or when a switch in the network enqueues the frame to a trunk whose transmission queue is congested.
OBJECT-TYPE    
  Counter32  

csFRoIPCircuitReceivedBECNs 1.3.6.1.4.1.3085.3.1.6.12.3.1.4
Number of frames received from the network indicating backward congestion since the virtual circuit was created. This occurs when the remote DTE sets the BECN flag, or when a switch in the network receives the frame from a trunk whose transmission queue is congested.
OBJECT-TYPE    
  Counter32  

csFRoIPCircuitSentFrames 1.3.6.1.4.1.3085.3.1.6.12.3.1.5
The number of frames sent from this virtual circuit since it was created.
OBJECT-TYPE    
  Counter32  

csFRoIPCircuitSentOctets 1.3.6.1.4.1.3085.3.1.6.12.3.1.6
The number of octets sent from this virtual circuit since it was created. Octets counted are the full frame relay header and the payload, but do not include the flag characters or CRC.
OBJECT-TYPE    
  Counter32  

csFRoIPCircuitReceivedFrames 1.3.6.1.4.1.3085.3.1.6.12.3.1.7
Number of frames received over this virtual circuit since it was created.
OBJECT-TYPE    
  Counter32  

csFRoIPCircuitReceivedOctets 1.3.6.1.4.1.3085.3.1.6.12.3.1.8
Number of octets received over this virtual circuit since it was created. Octets counted include the full frame relay header, but do not include the flag characters or the CRC.
OBJECT-TYPE    
  Counter32  

csFRoIPCircuitCreationTime 1.3.6.1.4.1.3085.3.1.6.12.3.1.9
The value of sysUpTime when the virtual circuit was created, whether by the Data Link Connection Management Interface or by a SetRequest.
OBJECT-TYPE    
  TimeStamp  

csFRoIPCircuitLastTimeChange 1.3.6.1.4.1.3085.3.1.6.12.3.1.10
The value of sysUpTime when last there was a change in the virtual circuit state
OBJECT-TYPE    
  TimeStamp  

csFRoIPCircuitCommittedBurst 1.3.6.1.4.1.3085.3.1.6.12.3.1.11
This variable indicates the maximum amount of data, in bits, that the network agrees to transfer under normal conditions, during the measurement interval.
OBJECT-TYPE    
  Integer32 0..2147483647  

csFRoIPCircuitExcessBurst 1.3.6.1.4.1.3085.3.1.6.12.3.1.12
This variable indicates the maximum amount of uncommitted data bits that the network will attempt to deliver over the measurement interval. By default, if not configured when creating the entry, the Excess Information Burst Size is set to the value of ifSpeed.
OBJECT-TYPE    
  Integer32 0..2147483647  

csFRoIPCircuitThroughput 1.3.6.1.4.1.3085.3.1.6.12.3.1.13
Throughput is the average number of 'Frame Relay Information Field' bits transferred per second across a user network interface in one direction, measured over the measurement interval. If the configured committed burst rate and throughput are both non-zero, the measurement interval, T, is T=csFRoIPCircuitCommittedBurst/csFRoIPCircuitThroughput. If the configured committed burst rate and throughput are both zero, the measurement interval, T, is T=csFRoIPCircuitExcessBurst/ifSpeed.
OBJECT-TYPE    
  Integer32 0..2147483647  

csFRoIPCircuitMulticast 1.3.6.1.4.1.3085.3.1.6.12.3.1.14
This indicates whether this VC is used as a unicast VC (i.e. not multicast) or the type of multicast service subscribed to
OBJECT-TYPE    
  INTEGER unicast(1), oneWay(2), twoWay(3), nWay(4)  

csFRoIPCircuitType 1.3.6.1.4.1.3085.3.1.6.12.3.1.15
Indication of whether the VC was manually created (static), or dynamically created (dynamic) via the data link control management interface.
OBJECT-TYPE    
  INTEGER static(1), dynamic(2)  

csFRoIPCircuitDiscards 1.3.6.1.4.1.3085.3.1.6.12.3.1.16
The number of inbound frames dropped because of format errors, or because the VC is inactive.
OBJECT-TYPE    
  Counter32  

csFRoIPCircuitReceivedDEs 1.3.6.1.4.1.3085.3.1.6.12.3.1.17
Number of frames received from the network indicating that they were eligible for discard since the virtual circuit was created. This occurs when the remote DTE sets the DE flag, or when in remote DTE's switch detects that the frame was received as Excess Burst data.
OBJECT-TYPE    
  Counter32  

csFRoIPCircuitSentDEs 1.3.6.1.4.1.3085.3.1.6.12.3.1.18
Number of frames sent to the network indicating that they were eligible for discard since the virtual circuit was created. This occurs when the local DTE sets the DE flag, indicating that during Network congestion situations those frames should be discarded in preference of other frames sent without the DE bit set.
OBJECT-TYPE    
  Counter32  

csFRoIPCircuitRowStatus 1.3.6.1.4.1.3085.3.1.6.12.3.1.19
This object is used to create a new row or modify or destroy an existing row in the manner described in the definition of the RowStatus textual convention. Writable objects in the table may be written in any RowStatus state.
OBJECT-TYPE    
  RowStatus  

csFRoIPCircuitOperStatus 1.3.6.1.4.1.3085.3.1.6.12.3.1.20
The operational status of this circuit.
OBJECT-TYPE    
  OperStatus  


csFRoIPCircuitTableEnd 1.3.6.1.4.1.3085.3.1.6.12.4
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionL2tpInfo 1.3.6.1.4.1.3085.3.1.6.13
OBJECT IDENTIFIER    

csOrionL2tpConfigTable 1.3.6.1.4.1.3085.3.1.6.13.1
This table contains general L2TP configuration parameters. IMPORTANT : Tunnels and session parameters are established using the parameters in this table. That means, changing the value of an object in this table will not affect existing tunnels and session. It will be applied for the tunnels and session that are to be established.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionL2tpConfigEntry

csOrionL2tpConfigEntry 1.3.6.1.4.1.3085.3.1.6.13.1.1
Each entry represents a single L2TP object for a Virtual Router. Only a single instance of this object is created upon creation of a VR.
OBJECT-TYPE    
  CsOrionL2tpConfigEntry  

csOrionL2tpConfigServiceIf 1.3.6.1.4.1.3085.3.1.6.13.1.1.1
This object defines the VI over which communication will occur with peers. This object can be set only when there is no tunnel.
OBJECT-TYPE    
  Integer32 1..64000  

csOrionL2tpConfigMaxTunnels 1.3.6.1.4.1.3085.3.1.6.13.1.1.2
This object defines the maximum number of L2TP tunnels that can be established.
OBJECT-TYPE    
  Integer32 1..65535  

csOrionL2tpConfigMaxSessionsPerTunnel 1.3.6.1.4.1.3085.3.1.6.13.1.1.3
This object defines the maximum sessions that can be established per tunnel.
OBJECT-TYPE    
  Integer32 1..65535  

csOrionL2tpConfigTunnelAuthentication 1.3.6.1.4.1.3085.3.1.6.13.1.1.4
This object controls the tunnel authentication. If set to Enable, a challenge will be sent to the peer during tunnel creation. The tunnel will be torn down if the peer does not send a valid response. Regardless of the setting, if the peer sends a challenge during tunnel creation, a response will be sent.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOrionL2tpConfigTunnelHelloInterval 1.3.6.1.4.1.3085.3.1.6.13.1.1.5
This object defines the interval (in seconds) in which HELLO (or keep-alive) packets are to be sent to the tunnel peer. Setting this to 0 disables sending of HELLO packets
OBJECT-TYPE    
  Integer32 0..3600  

csOrionL2tpConfigTunnelMaxRetransmissions 1.3.6.1.4.1.3085.3.1.6.13.1.1.6
This object defines the number of retransmissions which the tunnel will attempt before assuming that the peer is no longer responding.
OBJECT-TYPE    
  Integer32 5..10  

csOrionL2tpConfigTunnelMaxRetransmissionTimeout 1.3.6.1.4.1.3085.3.1.6.13.1.1.7
This object defines the maximum retransmission timeout interval in seconds which the tunnel will wait before retransmitting a control packet that has not been acknowledged.
OBJECT-TYPE    
  Integer32 10..30  

csOrionL2tpConfigTunnelRWS 1.3.6.1.4.1.3085.3.1.6.13.1.1.8
This object defines the control channel receive window size. It specifies the maximum number of packets the tunnel peer can send without waiting for an acknowledgement from this peer.
OBJECT-TYPE    
  Integer32 1..16  

csOrionL2tpConfigTunnelEmptyTunnelTimeout 1.3.6.1.4.1.3085.3.1.6.13.1.1.9
This object controls the time interval in seconds after which an alive but empty tunnel (i.e. a tunnel without sessions) will be torn down. Setting this to 0 will allow the empty tunnel to continue to exist until either the peer stops responding or the the tunnel is torn down by peer or the administrator.
OBJECT-TYPE    
  Integer32 0..3600  

csOrionL2tpConfigSessionFlowControl 1.3.6.1.4.1.3085.3.1.6.13.1.1.10
This object will be used to control whether the peer will be requested to flow control its transmissions. Note that regardless of the setting, if the peer requests that this peer flow control its transmissions, that request will be honored. Session Flow Control was part of draft specifications but not part of the RFC. This object should be set to Enable only if all the peers are using draft implementations.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOrionL2tpConfigSessionRWS 1.3.6.1.4.1.3085.3.1.6.13.1.1.11
This object controls the size of the session receive window. It will be advertised to the peer during session setup if csOrionL2tpConfigSessionFlowControl is set to Enable. The value 0 has special significance. It indicates that the peer must include sequence numbers in payload packets but the peer need not flow control its transmissions. This can be used to force a peer that is non-RFC compliant to include sequence numbers in payload packets.
OBJECT-TYPE    
  Integer32 0..16  

csOrionL2tpConfigSessionTxQueueSize 1.3.6.1.4.1.3085.3.1.6.13.1.1.12
This object controls the size of the session-specific transmit queue. If the peer has requested flow control and the peer's session receive window is full, packets to be sent to that peer will be held in a queue waiting for the peer's receive window to open.
OBJECT-TYPE    
  Integer32 1..16  

csOrionL2tpConfigSessionPacketSequencing 1.3.6.1.4.1.3085.3.1.6.13.1.1.13
This object determines whether or not session payload packets will be requested to be sent with sequence numbers from the tunnel peer.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOrionL2tpConfigPppConfigReqRetransmission 1.3.6.1.4.1.3085.3.1.6.13.1.1.14
This object is identical to csOrionPppIfConfigReqRtx.
OBJECT-TYPE    
  Integer32 0..64  

csOrionL2tpConfigPppRestartTimeout 1.3.6.1.4.1.3085.3.1.6.13.1.1.15
This object is identical to csOrionPppIfTimeout.
OBJECT-TYPE    
  Integer32 1..64  

csOrionL2tpConfigPppTermReqRetransmission 1.3.6.1.4.1.3085.3.1.6.13.1.1.16
This object is identical to csOrionPppIfTerminateReqRtx.
OBJECT-TYPE    
  Integer32 0..64  

csOrionL2tpConfigPppAuthProtocol 1.3.6.1.4.1.3085.3.1.6.13.1.1.17
This object is identical to csOrionPppIfConfigAuth.
OBJECT-TYPE    
  INTEGER none(1), pap(2), chapmd5(3), mschapv1Server(4), mschapv2Server(5)  

csOrionL2tpConfigPppReauthPeriod 1.3.6.1.4.1.3085.3.1.6.13.1.1.18
This object is identical to csOrionPppIfReauth.
OBJECT-TYPE    
  Integer32 0..65535  

csOrionL2tpConfigPppEchoTimeout 1.3.6.1.4.1.3085.3.1.6.13.1.1.19
The echo timeout in seconds.
OBJECT-TYPE    
  Integer32 0..65535  

csOrionL2tpConfigPppIpPoolName 1.3.6.1.4.1.3085.3.1.6.13.1.1.20
The name of this address pool. This is used to identify a specific address pool.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionL2tpTunnelTable 1.3.6.1.4.1.3085.3.1.6.13.2
The entries in this table are the L2TP tunnels that have been established with various peers.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionL2tpTunnelEntry

csOrionL2tpTunnelEntry 1.3.6.1.4.1.3085.3.1.6.13.2.1
Each entry represents a single L2TP tunnel established with a peer.
OBJECT-TYPE    
  CsOrionL2tpTunnelEntry  

csOrionL2tpTunnelLocalId 1.3.6.1.4.1.3085.3.1.6.13.2.1.1
Each tunnel is assigned a random locally unique identifier when the tunnel is created. The tunnel identifier can be used as an index for the tunnel table.
OBJECT-TYPE    
  Integer32 1..65535  

csOrionL2tpTunnelMaxSessions 1.3.6.1.4.1.3085.3.1.6.13.2.1.2
This object defines the maximum sessions that can be established in this tunnel. NOTE : Not used at this time.
OBJECT-TYPE    
  Integer32  

csOrionL2tpTunnelAuthentication 1.3.6.1.4.1.3085.3.1.6.13.2.1.3
This object controls the tunnel authentication. If set to Enable, a challenge will be sent to the peer during tunnel creation. The tunnel will be torn down if the peer does not send a valid response. Regardless of the setting, if the peer sends a challenge during tunnel creation, a response will be sent.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOrionL2tpTunnelHelloInterval 1.3.6.1.4.1.3085.3.1.6.13.2.1.4
This object defines the interval (in seconds) in which HELLO (or keep-alive) packets are to be sent to the tunnel peer. The value 0 indicates that sending of HELLO packets is disabled
OBJECT-TYPE    
  Integer32  

csOrionL2tpTunnelMaxRetransmissions 1.3.6.1.4.1.3085.3.1.6.13.2.1.5
This object defines the number of retransmission's which the tunnel will attempt before assuming that the peer is no longer responding.
OBJECT-TYPE    
  Integer32  

csOrionL2tpTunnelMaxRetransmissionTimeout 1.3.6.1.4.1.3085.3.1.6.13.2.1.6
This object defines the maximum retransmission timeout interval in seconds which the tunnel will wait before retransmitting a control packet that has not been acknowledged.
OBJECT-TYPE    
  Integer32  

csOrionL2tpTunnelRWS 1.3.6.1.4.1.3085.3.1.6.13.2.1.7
This object defines the control channel receive window size. It specifies the maximum number of packets the tunnel peer can send without waiting for an acknowledgement from this peer.
OBJECT-TYPE    
  Integer32  

csOrionL2tpTunnelEmptyTunnelTimeout 1.3.6.1.4.1.3085.3.1.6.13.2.1.8
This object controls the time interval in seconds after which an alive but empty tunnel (i.e. a tunnel without sessions) will be torn down. The value 0 indicates that the empty tunnel will continue to exist until either the peer stops responding or the the tunnel is torn down by peer or the administrator.
OBJECT-TYPE    
  Integer32  

csOrionL2tpTunnelUpTime 1.3.6.1.4.1.3085.3.1.6.13.2.1.9
This object indicates the number of seconds this tunnel has been up since it was established.
OBJECT-TYPE    
  Integer32  

csOrionL2tpTunnelRemoteIpAddress 1.3.6.1.4.1.3085.3.1.6.13.2.1.10
This index identifies the IP Address of the peer.
OBJECT-TYPE    
  IpAddress  

csOrionL2tpTunnelRemoteTunnelId 1.3.6.1.4.1.3085.3.1.6.13.2.1.11
This object is the identifier assigned to the tunnel by the peer. This identifier is unique only for a given peer.
OBJECT-TYPE    
  Integer32  

csOrionL2tpTunnelRemoteUdpPort 1.3.6.1.4.1.3085.3.1.6.13.2.1.12
This object identifies the UDP port that the peer is using for communication.
OBJECT-TYPE    
  Integer32  

csOrionL2tpTunnelRemoteRWS 1.3.6.1.4.1.3085.3.1.6.13.2.1.13
This is the control receive window size advertised by the peer during tunnel creation. It specifies the number of control packets that can be sent to the peer without waiting for an acknowledgement.
OBJECT-TYPE    
  Integer32  

csOrionL2tpTunnelRemoteHostname 1.3.6.1.4.1.3085.3.1.6.13.2.1.14
This is the name that the peer used to identify itself during tunnel creation
OBJECT-TYPE    
  DisplayString  

csOrionL2tpTunnelActiveSessionsCount 1.3.6.1.4.1.3085.3.1.6.13.2.1.15
This is the number of sessions that are currently present within this tunnel
OBJECT-TYPE    
  Integer32  

csOrionL2tpTunnelStatus 1.3.6.1.4.1.3085.3.1.6.13.2.1.16
The row status for this table. Used only for deleting this tunnel. IMPORTANT: (1) entries on this table are created when a tunnel is established by the peer. Therefore, creation of entry thru SNMP SET request is not allowed. (2) tunnel is usually torn down by the peer.
OBJECT-TYPE    
  RowStatus  

csOrionL2tpSessionTable 1.3.6.1.4.1.3085.3.1.6.13.3
The entries in this table are the L2TP sessions established in a specific tunnel.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionL2tpSessionEntry

csOrionL2tpSessionEntry 1.3.6.1.4.1.3085.3.1.6.13.3.1
Each entry represents a single session object in a specific tunnel.
OBJECT-TYPE    
  CsOrionL2tpSessionEntry  

csOrionL2tpSessionLocalId 1.3.6.1.4.1.3085.3.1.6.13.3.1.1
Each session is assigned a random locally unique tunnel-specific identifier when it is created. The session identifier can be used as an index to identify a particular session in a tunnel.
OBJECT-TYPE    
  Integer32 1..65535  

csOrionL2tpSessionFlowControl 1.3.6.1.4.1.3085.3.1.6.13.3.1.2
This object will be used to control whether the peer will be requested to flow control its transmissions. Note that regardless of the setting, if the peer requests that this peer flow control its transmissions, that request will be honored. Session Flow Control was part of draft specifications but not part of the RFC. This object should be set to Enable only if all the peers are using draft implementations.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOrionL2tpSessionRWS 1.3.6.1.4.1.3085.3.1.6.13.3.1.3
This object controls the size of the session receive window. It will be advertised to the peer during session setup if csOrionL2tpConfigSessionFlowControl is set to Enable. The value 0 has special significance. It indicates that the peer must include sequence numbers in payload packets but the peer need not flow control its transmissions. This can be used to force a peer that is non-RFC compliant to include sequence numbers in payload packets.
OBJECT-TYPE    
  Integer32  

csOrionL2tpSessionTxQueueSize 1.3.6.1.4.1.3085.3.1.6.13.3.1.4
If the peer has requested flow control and the peer's session receive window is full, packets to be sent to that peer will be held in a queue waiting for the peer's receive window to open. This object controls the size of the session-specific transmit queue.
OBJECT-TYPE    
  Integer32  

csOrionL2tpSessionPacketSequencing 1.3.6.1.4.1.3085.3.1.6.13.3.1.5
This object determines whether or not session payload packets will be requested to be sent with sequence numbers from the tunnel peer.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOrionL2tpSessionUpTime 1.3.6.1.4.1.3085.3.1.6.13.3.1.6
This object indicates the number of seconds this session has been up since established.
OBJECT-TYPE    
  Integer32  

csOrionL2tpSessionRemoteCallId 1.3.6.1.4.1.3085.3.1.6.13.3.1.7
This object is the identifier assigned to the session by the peer. This identifier is unique only for a given peer in a specific tunnel.
OBJECT-TYPE    
  Integer32  

csOrionL2tpSessionRemoteFlowControl 1.3.6.1.4.1.3085.3.1.6.13.3.1.8
This object indicates whether flow control is requested by the peer or not.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOrionL2tpSessionRemoteRWS 1.3.6.1.4.1.3085.3.1.6.13.3.1.9
This is the session receive window size advertised by the peer during session creation. It specifies the number of payload packets that can be sent to the peer without waiting for an acknowledgement. If this is non-zero it means that the peer has requested flow control.
OBJECT-TYPE    
  Integer32  

csOrionL2tpSessionUsername 1.3.6.1.4.1.3085.3.1.6.13.3.1.10
This is the name of the user on whose behalf the session was created.
OBJECT-TYPE    
  DisplayString  

csOrionL2tpSessionRowStatus 1.3.6.1.4.1.3085.3.1.6.13.3.1.11
The row status for this table. Used only for deleting this session. IMPORTANT: (1) entries on this table are created when a session is established by the peer. Therefore, creation of entry thru SNMP SET request is not allowed. (2) the peer usually tears down the session.
OBJECT-TYPE    
  RowStatus  

csOrionL2tpSessionLocalIpAddress 1.3.6.1.4.1.3085.3.1.6.13.3.1.12
The IP address for this sesssion. It is dynamically assigned form the csOrionL2tpConfigPppIpPoolName.
OBJECT-TYPE    
  IpAddress  

csOrionL2tpSessionRemoteIpAddress 1.3.6.1.4.1.3085.3.1.6.13.3.1.13
The IP address on the other side of this sesssion.
OBJECT-TYPE    
  IpAddress  

csOrionL2tpSessionCallType 1.3.6.1.4.1.3085.3.1.6.13.3.1.14
This object indicates the type of call and the role this tunnel peer is providing for this session. For example, lacIncoming(1) indicates that this tunnel peer is acting as a LAC and generated a Incoming-Call-Request to the tunnel peer (the LNS). Note that tunnel peers can be both LAC and LNS simultaneously.
OBJECT-TYPE    
  INTEGER lacIncoming(1), lnsIncoming(2), lacOutgoing(3), lnsOutgoing(4)  

csOrionL2tpSessionState 1.3.6.1.4.1.3085.3.1.6.13.3.1.15
This object determines the current state of the session or call.
OBJECT-TYPE    
  INTEGER sessionIdle(1), sessionConnecting(2), sessionEstablished(3), sessionDisconnecting(4)  

csOrionLnsConfigTable 1.3.6.1.4.1.3085.3.1.6.13.4
This table contains general L2TP Network Server (LNS) configuration parameters.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionLnsConfigEntry

csOrionLnsConfigEntry 1.3.6.1.4.1.3085.3.1.6.13.4.1
Each entry represents a single LNS object for a Virtual Router. There is only one instance of LNS on a Virtual Router. This object is created along with an L2TP object when a VR is created.
OBJECT-TYPE    
  CsOrionLnsConfigEntry  

csOrionLnsConfigAdminStatus 1.3.6.1.4.1.3085.3.1.6.13.4.1.1
Setting this object to 'disable' causes all tunnels to be immediately disconnected and no further tunnels to be either initiated or accepted. Setting this object to 'drain' will prevent any new tunnels and/or sessions to be either initiated or accepted but does NOT disconnect any active tunnels/sessions.
OBJECT-TYPE    
  INTEGER enable(1), disable(2), drain(3)  

csOrionLacConfigTable 1.3.6.1.4.1.3085.3.1.6.13.5
This table contains general L2TP Network Server (LNS) configuration parameters.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionLacConfigEntry

csOrionLacConfigEntry 1.3.6.1.4.1.3085.3.1.6.13.5.1
Each entry represents a single LAC object for a Virtual Router. There is only one instance of LAC on a Virtual Router. This object is created along with an L2TP object when a VR is created.
OBJECT-TYPE    
  CsOrionLacConfigEntry  

csOrionLacConfigAdminStatus 1.3.6.1.4.1.3085.3.1.6.13.5.1.1
Setting this object to 'disable' causes all tunnels to be immediately disconnected and no further tunnels to be either initiated or accepted. Setting this object to 'drain' will prevent any new tunnels and/or sessions to be either initiated or accepted but does NOT disconnect any active tunnels/sessions.
OBJECT-TYPE    
  INTEGER enable(1), disable(2), drain(3)  

csOrionTunnelSwitchTable 1.3.6.1.4.1.3085.3.1.6.13.6
to do...
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionTunnelSwitchEntry

csOrionTunnelSwitchEntry 1.3.6.1.4.1.3085.3.1.6.13.6.1
to do...
OBJECT-TYPE    
  CsOrionTunnelSwitchEntry  

csOrionTunnelSwitchClientName 1.3.6.1.4.1.3085.3.1.6.13.6.1.1
This object identifies the client name of the originating tunnel.
OBJECT-TYPE    
  OCTET STRING SIZE(1..80)  

csOrionTunnelSwitchMode 1.3.6.1.4.1.3085.3.1.6.13.6.1.2
This object determines the switching action.
OBJECT-TYPE    
  INTEGER passThrough(1), authenticate(2)  

csOrionTunnelSwitchRowStatus 1.3.6.1.4.1.3085.3.1.6.13.6.1.3
.
OBJECT-TYPE    
  RowStatus  

csOrionTunnelSwitchTargetTable 1.3.6.1.4.1.3085.3.1.6.13.7
.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionTunnelSwitchTargetEntry

csOrionTunnelSwitchTargetEntry 1.3.6.1.4.1.3085.3.1.6.13.7.1
.
OBJECT-TYPE    
  CsOrionTunnelSwitchTargetEntry  

csOrionTunnelSwitchTargetIpAddress 1.3.6.1.4.1.3085.3.1.6.13.7.1.1
This object identifies the IP address of the destination LNS.
OBJECT-TYPE    
  IpAddress  

csOrionTunnelSwitchTargetPriority 1.3.6.1.4.1.3085.3.1.6.13.7.1.2
This object determines the priority of this target address. Priority value 1 being the highest.
OBJECT-TYPE    
  Integer32 1..65535  

csOrionTunnelSwitchTargetMaxSession 1.3.6.1.4.1.3085.3.1.6.13.7.1.3
This object determines the maximum number of sessions that can be handled by this target address.
OBJECT-TYPE    
  Integer32 1..65535  

csOrionTunnelSwitchTargetSessionCount 1.3.6.1.4.1.3085.3.1.6.13.7.1.4
This object keeps the count of the active sessions on this target address.
OBJECT-TYPE    
  Counter32  

csOrionTunnelSwitchTargetRowStatus 1.3.6.1.4.1.3085.3.1.6.13.7.1.5
Row status for this table.
OBJECT-TYPE    
  RowStatus  

csOrionL2tpStatsTable 1.3.6.1.4.1.3085.3.1.6.13.8
The L2TP Status and Statistics table.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionL2tpStatsEntry

csOrionL2tpStatsEntry 1.3.6.1.4.1.3085.3.1.6.13.8.1
An L2TP Stats entry. An entry in this table may correspond to a single endpoint or a group of tunnel endpoints.
OBJECT-TYPE    
  CsOrionL2tpStatsEntry  

csOrionL2tpStatsTotalTunnels 1.3.6.1.4.1.3085.3.1.6.13.8.1.1
This object returns the total number of tunnels that have successfully reached the established state.
OBJECT-TYPE    
  Counter32  

csOrionL2tpStatsFailedTunnels 1.3.6.1.4.1.3085.3.1.6.13.8.1.2
This object returns the number of tunnels that failed to reach the established state.
OBJECT-TYPE    
  Counter32  

csOrionL2tpStatsFailedAuthentications 1.3.6.1.4.1.3085.3.1.6.13.8.1.3
This object returns the number of failed tunnel connection attempts because the tunnel peer failed authentication.
OBJECT-TYPE    
  Counter32  

csOrionL2tpStatsActiveTunnels 1.3.6.1.4.1.3085.3.1.6.13.8.1.4
This object returns the number of tunnels that are currently active.
OBJECT-TYPE    
  Gauge32  

csOrionL2tpStatsTotalSessions 1.3.6.1.4.1.3085.3.1.6.13.8.1.5
This object returns the total number of sessions that have successfully reached the established state.
OBJECT-TYPE    
  Counter32  

csOrionL2tpStatsFailedSessions 1.3.6.1.4.1.3085.3.1.6.13.8.1.6
This object returns the number of sessions that failed to reach the established state.
OBJECT-TYPE    
  Counter32  

csOrionL2tpStatsActiveSessions 1.3.6.1.4.1.3085.3.1.6.13.8.1.7
This object returns the number of sessions that are currently active.
OBJECT-TYPE    
  Gauge32  

csOrionL2tpStatsDrainingTunnels 1.3.6.1.4.1.3085.3.1.6.13.8.1.8
This object indicates if this L2TP is draining off sessions from all tunnels. This object will return no(2) when the domain is not draining sessions or after the last L2TP session has disconnected when the domain is in the draining state.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

csOrionL2tpStatsControlRecvOctets 1.3.6.1.4.1.3085.3.1.6.13.8.1.9
This object returns the number of control channel octets received. NOTE : This is not currently supported. It will just return zero. [Alan 10/12/2000]
OBJECT-TYPE    
  Counter32  

csOrionL2tpStatsControlRecvPackets 1.3.6.1.4.1.3085.3.1.6.13.8.1.10
This object returns the number of control packets received.
OBJECT-TYPE    
  Counter32  

csOrionL2tpStatsControlSendOctets 1.3.6.1.4.1.3085.3.1.6.13.8.1.11
This object returns the number of control channel octets that were transmitted to tunnel endpoints. NOTE : This is not currently supported. It will just return zero. [Alan 10/12/2000]
OBJECT-TYPE    
  Counter32  

csOrionL2tpStatsControlSendPackets 1.3.6.1.4.1.3085.3.1.6.13.8.1.12
This object returns the number of control packets that were transmitted to tunnel endpoints.
OBJECT-TYPE    
  Counter32  

csOrionL2tpStatsPayloadRecvOctets 1.3.6.1.4.1.3085.3.1.6.13.8.1.13
This object returns the number of payload channel octets that were received.
OBJECT-TYPE    
  Counter32  

csOrionL2tpStatsPayloadRecvPackets 1.3.6.1.4.1.3085.3.1.6.13.8.1.14
This object returns the number of payload packets that were received.
OBJECT-TYPE    
  Counter32  

csOrionL2tpStatsPayloadRecvDiscards 1.3.6.1.4.1.3085.3.1.6.13.8.1.15
This object returns the number of received payload packets that were discarded.
OBJECT-TYPE    
  Counter32  

csOrionL2tpStatsPayloadSendOctets 1.3.6.1.4.1.3085.3.1.6.13.8.1.16
This object returns the number of payload channel octets that were transmitted to tunnel peers. NOTE : This is not currently supported. It will just return zero. [Alan 10/12/2000]
OBJECT-TYPE    
  Counter32  

csOrionL2tpStatsPayloadSendPackets 1.3.6.1.4.1.3085.3.1.6.13.8.1.17
This object returns the number of payload packets that were transmitted to tunnel peers.
OBJECT-TYPE    
  Counter32  

csOrionL2tpTunnelStatsTable 1.3.6.1.4.1.3085.3.1.6.13.9
The L2TP tunnel status and statistics table.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionL2tpTunnelStatsEntry

csOrionL2tpTunnelStatsEntry 1.3.6.1.4.1.3085.3.1.6.13.9.1
An L2TP tunnel interface stats entry.
OBJECT-TYPE    
  CsOrionL2tpTunnelStatsEntry  

csOrionL2tpTunnelStatsState 1.3.6.1.4.1.3085.3.1.6.13.9.1.1
This field contains the current state of the control tunnel.
OBJECT-TYPE    
  INTEGER tunnelIdle(1), tunnelConnecting(2), tunnelEstablished(3), tunnelDisconnecting(4)  

csOrionL2tpTunnelStatsTotalSessions 1.3.6.1.4.1.3085.3.1.6.13.9.1.2
This object contains the total number of sessions that this tunnel has successfully connected through to its tunnel peer since this tunnel was created.
OBJECT-TYPE    
  Counter32  

csOrionL2tpTunnelStatsFailedSessions 1.3.6.1.4.1.3085.3.1.6.13.9.1.3
This object contains the total number of sessions that were initiated but failed to reach the established phase. NOTE : This is not currently supported. It will just return zero. [Alan 10/12/2000]
OBJECT-TYPE    
  Counter32  

csOrionL2tpTunnelStatsActiveSessions 1.3.6.1.4.1.3085.3.1.6.13.9.1.4
This object contains the total number of sessions in the established state for this tunnel. NOTE : This is not currently supported. It will just return zero. [Alan 10/12/2000]
OBJECT-TYPE    
  Gauge32  

csOrionL2tpInfoEnd 1.3.6.1.4.1.3085.3.1.6.13.10
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionQosInfo 1.3.6.1.4.1.3085.3.1.6.14
OBJECT IDENTIFIER    

csOrionDsByteFilterInfo 1.3.6.1.4.1.3085.3.1.6.14.1
OBJECT IDENTIFIER    

csOrionVrDsByteFilterTable 1.3.6.1.4.1.3085.3.1.6.14.1.1
This table specifies a set of acl's to be applied to packets received by (and sent from) this virtual router. The first entry whose acl matches a packet causes the DS Byte field of the packet to be set to the value specified in the table entry. If no entry's acl matches the packet, the DS Byte field of the packet will be set to the value specified in csOrionVPNVRouterIpDsByte.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionVrDsByteFilterEntry

csOrionVrDsByteFilterEntry 1.3.6.1.4.1.3085.3.1.6.14.1.1.1
Each entry specifies whether packets satisfying a specific access list entry will have their DS Byte field set to the value indicated in the table entry.
OBJECT-TYPE    
  CsOrionVrDsByteFilterEntry  

csOrionVrDsByteFilterIndex 1.3.6.1.4.1.3085.3.1.6.14.1.1.1.1
The Index of this particular Packet Filter.
OBJECT-TYPE    
  Integer32 1..65535  

csOrionVrDsByteFilterAclId 1.3.6.1.4.1.3085.3.1.6.14.1.1.1.2
The Id of an access list entry (from csOrionGenAclTable). All packets transmitted or received on any of the virtual interfaces on this virtual router that satisfy that access list entry are acted upon by this filter.
OBJECT-TYPE    
  Integer32 0..65535  

csOrionVrDsByteFilterAction 1.3.6.1.4.1.3085.3.1.6.14.1.1.1.3
The action performed by this filter.
OBJECT-TYPE    
  INTEGER ignore(1), setValue(2)  

csOrionVrDsByteFilterValue 1.3.6.1.4.1.3085.3.1.6.14.1.1.1.4
This object defines the values to be placed in the TypeOfService octet of each IP packet sent out or forwarded by the VR. The valid range covers both 7-bit configurations recommended in RFC 1349 (Precedence and TOS bits) and 6-bit configurations recommended in RFC 2474 (Differentiated Services). If the value selected is 256, the DsByte is not changed and packets are forwarded with their existing TypeOfService byte value.
OBJECT-TYPE    
  Integer32 0..256  

csOrionVrDsByteFilterDirection 1.3.6.1.4.1.3085.3.1.6.14.1.1.1.5
The direction of packets on which this filter is applied.
OBJECT-TYPE    
  INTEGER in(1), out(2)  

csOrionVrDsByteFilterRowStatus 1.3.6.1.4.1.3085.3.1.6.14.1.1.1.6
A row status type for this Table entry.
OBJECT-TYPE    
  RowStatus  

csOrionViDsByteFilterTable 1.3.6.1.4.1.3085.3.1.6.14.1.2
This table specifies a set of acl's to be applied to packets received over (or sent out) each the interfaces belonging to this virtual router. The first entry whose acl matches a packet causes the DS Byte field of the packet to be set to the value specified in the table entry. If no entry's acl matches the packet, the DS Byte field of the packet will be set to the value specified in csOrionVPNVRouterIpDsByte.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionViDsByteFilterEntry

csOrionViDsByteFilterEntry 1.3.6.1.4.1.3085.3.1.6.14.1.2.1
Each filter specifies whether packets satisfying a specific access list entry are permitted or denied to be passed along their route.
OBJECT-TYPE    
  CsOrionViDsByteFilterEntry  

csOrionViDsByteFilterIndex 1.3.6.1.4.1.3085.3.1.6.14.1.2.1.1
The Index of this particular Packet Filter.
OBJECT-TYPE    
  Integer32 1..65535  

csOrionViDsByteFilterAclId 1.3.6.1.4.1.3085.3.1.6.14.1.2.1.2
The Id of an access list entry (from csOrionGenAclTable). All packets transmitted or received on this virtual interface that access list entry are acted upon by this filter.
OBJECT-TYPE    
  Integer32 0..65535  

csOrionViDsByteFilterAction 1.3.6.1.4.1.3085.3.1.6.14.1.2.1.3
The action performed by this filter.
OBJECT-TYPE    
  INTEGER ignore(1), setValue(2)  

csOrionViDsByteFilterValue 1.3.6.1.4.1.3085.3.1.6.14.1.2.1.4
This object defines the values to be placed in the TypeOfService octet of each IP packet sent out or forwarded by the VR. The valid range covers both 7-bit configurations recommended in RFC 1349 (Precedence and TOS bits) and 6-bit configurations recommended in RFC 2474 (Differentiated Services). If the value selected is 256, the DsByte is not changed and packets are forwarded with their existing TypeOfService byte value.
OBJECT-TYPE    
  Integer32 0..256  

csOrionViDsByteFilterDirection 1.3.6.1.4.1.3085.3.1.6.14.1.2.1.5
The direction of packets on which this filter is applied.
OBJECT-TYPE    
  INTEGER in(1), out(2)  

csOrionViDsByteFilterRowStatus 1.3.6.1.4.1.3085.3.1.6.14.1.2.1.6
A row status type for this Table entry.
OBJECT-TYPE    
  RowStatus  

csOrionDsByteFilterInfoEnd 1.3.6.1.4.1.3085.3.1.6.14.1.3
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionExpFilterInfo 1.3.6.1.4.1.3085.3.1.6.14.2
OBJECT IDENTIFIER    

csExpFilterTable 1.3.6.1.4.1.3085.3.1.6.14.2.1
This table is used to filter MPLS EXP bits.
OBJECT-TYPE    
  SEQUENCE OF  
    CsExpFilterEntry

csExpFilterEntry 1.3.6.1.4.1.3085.3.1.6.14.2.1.1
An entry in this table is used to set the attributes for a matching EXP bits for a inbound/outbound direction for a VR.
OBJECT-TYPE    
  CsExpFilterEntry  

csExpFilterDirection 1.3.6.1.4.1.3085.3.1.6.14.2.1.1.1
The direction to filter.
OBJECT-TYPE    
  INTEGER inbound(1), outbound(2)  

csExpFilterMatchingExp 1.3.6.1.4.1.3085.3.1.6.14.2.1.1.2
The EXP value to filter.
OBJECT-TYPE    
  Integer32 0..7  

csExpFilterExpValue 1.3.6.1.4.1.3085.3.1.6.14.2.1.1.3
The EXP value to change to.
OBJECT-TYPE    
  Integer32 -1..7  

csExpFilterServiceCategory 1.3.6.1.4.1.3085.3.1.6.14.2.1.1.4
The service category to use.
OBJECT-TYPE    
  INTEGER ef(1), af1(2), af2(3), af3(4), af4(5), be(6), none(7), ef-low(8), ef-high(9)  

csExpFilterColorMeteringMode 1.3.6.1.4.1.3085.3.1.6.14.2.1.1.5
Used to activate metering.
OBJECT-TYPE    
  INTEGER aware(1), blind(2)  

csExpFilterDropPrecedence 1.3.6.1.4.1.3085.3.1.6.14.2.1.1.6
Used to specify the drop precedence to use.
OBJECT-TYPE    
  INTEGER red(1), yellow(2), green(3), none(4)  

csExpFilterRowStatus 1.3.6.1.4.1.3085.3.1.6.14.2.1.1.7
A row status type for this table
OBJECT-TYPE    
  RowStatus  

csExpFilterTableEnd 1.3.6.1.4.1.3085.3.1.6.14.2.2
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csExpFilterIfTable 1.3.6.1.4.1.3085.3.1.6.14.2.3
This table is used to filter MPLS EXP bits.
OBJECT-TYPE    
  SEQUENCE OF  
    CsExpFilterIfEntry

csExpFilterIfEntry 1.3.6.1.4.1.3085.3.1.6.14.2.3.1
An entry in this table is used to set the attributes for a matching EXP bits for a inbound/outbound direction for a
OBJECT-TYPE    
  CsExpFilterIfEntry  

csExpFilterIfDirection 1.3.6.1.4.1.3085.3.1.6.14.2.3.1.1
The direction to filter.
OBJECT-TYPE    
  INTEGER inbound(1), outbound(2)  

csExpFilterIfMatchingExp 1.3.6.1.4.1.3085.3.1.6.14.2.3.1.2
The EXP value to filter.
OBJECT-TYPE    
  Integer32 0..7  

csExpFilterIfExpValue 1.3.6.1.4.1.3085.3.1.6.14.2.3.1.3
The EXP value to set to.
OBJECT-TYPE    
  Integer32 -1..7  

csExpFilterIfServiceCategory 1.3.6.1.4.1.3085.3.1.6.14.2.3.1.4
Used to assign service category.
OBJECT-TYPE    
  INTEGER ef(1), af1(2), af2(3), af3(4), af4(5), be(6), none(7), ef-low(8), ef-high(9)  

csExpFilterIfColorMeteringMode 1.3.6.1.4.1.3085.3.1.6.14.2.3.1.5
Used to activate metering.
OBJECT-TYPE    
  INTEGER aware(1), blind(2)  

csExpFilterIfDropPrecedence 1.3.6.1.4.1.3085.3.1.6.14.2.3.1.6
Used to assign drop precedence.
OBJECT-TYPE    
  INTEGER red(1), yellow(2), green(3), none(4)  

csExpFilterIfRowStatus 1.3.6.1.4.1.3085.3.1.6.14.2.3.1.7
A row status type for this table
OBJECT-TYPE    
  RowStatus  

csOrionQosInfoEnd 1.3.6.1.4.1.3085.3.1.6.14.3
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionDHCPInfo 1.3.6.1.4.1.3085.3.1.6.15
OBJECT IDENTIFIER    

csOrionDHCPRelayInfo 1.3.6.1.4.1.3085.3.1.6.15.1
OBJECT IDENTIFIER    

csOrionVrDhcpRelayConfigTable 1.3.6.1.4.1.3085.3.1.6.15.1.1
This table contains DHCP Relay Agent configuration parameters.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionVrDhcpRelayConfigEntry

csOrionVrDhcpRelayConfigEntry 1.3.6.1.4.1.3085.3.1.6.15.1.1.1
Each entry represents the DHCP Relay configuration for a single VR.
OBJECT-TYPE    
  CsOrionVrDhcpRelayConfigEntry  

csOrionVrDhcpRelayMaxHops 1.3.6.1.4.1.3085.3.1.6.15.1.1.1.1
The upper limit for the 'hops' field of DHCP requests. Any request with a value exceeding this limit will be dropped by the relay agent.
OBJECT-TYPE    
  Integer32 1..16  

csOrionVrDhcpRelaySecsThreshold 1.3.6.1.4.1.3085.3.1.6.15.1.1.1.2
The threshold, in seconds, for the 'time elapsed' field of DHCP requests. This value is used to prioritize clients across the relay agent. The agent forwards only those requests that have a 'time elapsed' field value equal to or greater than the value set for this paramter.
OBJECT-TYPE    
  Integer32 0..360  

csOrionVrDhcpRelayOperStatus 1.3.6.1.4.1.3085.3.1.6.15.1.1.1.3
This object indicates the current operational status of the relay agent.
OBJECT-TYPE    
  OperStatus  

csOrionVrDhcpRelayAdminStatus 1.3.6.1.4.1.3085.3.1.6.15.1.1.1.4
This object indicates the desired state of the DHCP relay agent. A relay agent, once enabled, requires at least one DHCP server address to forward packets to. If a list of servers has been configured, then all requests are forwarded to all servers -- no priority or precedence is applied.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

csOrionVrDhcpRelayServerTable 1.3.6.1.4.1.3085.3.1.6.15.1.2
This table contains the IP addresses of a list of DHCP servers to which the relay can forward the requests.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionVrDhcpRelayServerEntry

csOrionVrDhcpRelayServerEntry 1.3.6.1.4.1.3085.3.1.6.15.1.2.1
Each entry contains a information about a single DHCP server - an IP address, and, optionally, a name.
OBJECT-TYPE    
  CsOrionVrDhcpRelayServerEntry  

csOrionVrDhcpRelayServerAddress 1.3.6.1.4.1.3085.3.1.6.15.1.2.1.1
The IP address of the DHCP server this entry corresponds to.
OBJECT-TYPE    
  IpAddress  

csOrionVrDhcpRelayServerName 1.3.6.1.4.1.3085.3.1.6.15.1.2.1.2
The name of the the DHCP server this entry corresponds to.
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

csOrionVrDhcpRelayServerRowStatus 1.3.6.1.4.1.3085.3.1.6.15.1.2.1.3
The RowStatus object for this table entry.
OBJECT-TYPE    
  RowStatus  

csOrionDhcpRelayStatsTable 1.3.6.1.4.1.3085.3.1.6.15.1.3
This table contains various statistics pertaining to the DHCP Relay Agent.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionDhcpRelayStatsEntry

csOrionDhcpRelayStatsEntry 1.3.6.1.4.1.3085.3.1.6.15.1.3.1
A Set of statistics for a single DHCP Relay Agent.
OBJECT-TYPE    
  CsOrionDhcpRelayStatsEntry  

csOrionDhcpRelayInReqs 1.3.6.1.4.1.3085.3.1.6.15.1.3.1.1
The total number of DHCP Request packets received.
OBJECT-TYPE    
  Counter32  

csOrionDhcpRelayInDiscs 1.3.6.1.4.1.3085.3.1.6.15.1.3.1.2
The total number of DHCP Discover packets received.
OBJECT-TYPE    
  Counter32  

csOrionDhcpRelayInRels 1.3.6.1.4.1.3085.3.1.6.15.1.3.1.3
The total number of DHCP Release packets received.
OBJECT-TYPE    
  Counter32  

csOrionDhcpRelayInDecs 1.3.6.1.4.1.3085.3.1.6.15.1.3.1.4
The total number of DHCP Decline packets received.
OBJECT-TYPE    
  Counter32  

csOrionDhcpRelayInAcks 1.3.6.1.4.1.3085.3.1.6.15.1.3.1.5
The tatal number of DHCP Ack packets received.
OBJECT-TYPE    
  Counter32  

csOrionDhcpRelayInNaks 1.3.6.1.4.1.3085.3.1.6.15.1.3.1.6
The total number of DHCP Nak packets received.
OBJECT-TYPE    
  Counter32  

csOrionDhcpRelayInOffers 1.3.6.1.4.1.3085.3.1.6.15.1.3.1.7
The total number of DHCP Offer packets received.
OBJECT-TYPE    
  Counter32  

csOrionDhcpRelayOutReqs 1.3.6.1.4.1.3085.3.1.6.15.1.3.1.8
The total number of DHCP Request packets forwarded.
OBJECT-TYPE    
  Counter32  

csOrionDhcpRelayOutDiscs 1.3.6.1.4.1.3085.3.1.6.15.1.3.1.9
The total number of DHCP Discover packets forwarded.
OBJECT-TYPE    
  Counter32  

csOrionDhcpRelayOutRels 1.3.6.1.4.1.3085.3.1.6.15.1.3.1.10
The total number of DHCP Release packets forwarded.
OBJECT-TYPE    
  Counter32  

csOrionDhcpRelayOutDecs 1.3.6.1.4.1.3085.3.1.6.15.1.3.1.11
The total number of DHCP Decline packets forwarded.
OBJECT-TYPE    
  Counter32  

csOrionDhcpRelayOutAcks 1.3.6.1.4.1.3085.3.1.6.15.1.3.1.12
The tatal number of DHCP Ack packets forwarded.
OBJECT-TYPE    
  Counter32  

csOrionDhcpRelayOutNaks 1.3.6.1.4.1.3085.3.1.6.15.1.3.1.13
The total number of DHCP Nak packets forwarded.
OBJECT-TYPE    
  Counter32  

csOrionDhcpRelayOutOffers 1.3.6.1.4.1.3085.3.1.6.15.1.3.1.14
The total number of DHCP Offer packets forwarded.
OBJECT-TYPE    
  Counter32  

csOrionDHCPInfoEnd 1.3.6.1.4.1.3085.3.1.6.15.2
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionMlpppInfo 1.3.6.1.4.1.3085.3.1.6.16
OBJECT IDENTIFIER    

csOrionMlpppBundleTable 1.3.6.1.4.1.3085.3.1.6.16.1
This table contains information about PPP multilink bundles.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionMlpppBundleEntry

csOrionMlpppBundleEntry 1.3.6.1.4.1.3085.3.1.6.16.1.1
Each entry represents a PPP multilink bundle.
OBJECT-TYPE    
  CsOrionMlpppBundleEntry  

csOrionMlpppBundleSlot 1.3.6.1.4.1.3085.3.1.6.16.1.1.1
The slot on which this bundle is to be created. This value must be specified at creation and, henceforth, cannot be changed.
OBJECT-TYPE    
  Integer32 1..26  

csOrionMlpppBundleIndex 1.3.6.1.4.1.3085.3.1.6.16.1.1.2
The index associated with this PPP multilink bundle.
OBJECT-TYPE    
  Integer32 1..65535  


csOrionMlpppBundleQueueSize 1.3.6.1.4.1.3085.3.1.6.16.1.1.4
The maximum size of this bundle's re-sequencing queue.
OBJECT-TYPE    
  Integer32 0..256  

csOrionMlpppBundleFragmentsPerPacket 1.3.6.1.4.1.3085.3.1.6.16.1.1.5
The number of fragments per packet.
OBJECT-TYPE    
  Integer32 1..1  

csOrionMlpppBundleReorderTimeout 1.3.6.1.4.1.3085.3.1.6.16.1.1.6
The configured reorder timeout value for this bundle, expressed in milliseconds.
OBJECT-TYPE    
  Integer32 1000..10000  

csOrionMlpppBundleTxMRRU 1.3.6.1.4.1.3085.3.1.6.16.1.1.7
The maximum receive reconstructed unit in the transmit direction.
OBJECT-TYPE    
  Integer32  

csOrionMlpppBundleRxMRRU 1.3.6.1.4.1.3085.3.1.6.16.1.1.8
The maximum receive reconstructed unit in the receive direction.
OBJECT-TYPE    
  Integer32  

csOrionMlpppBundleEventLogLevel 1.3.6.1.4.1.3085.3.1.6.16.1.1.9
The desired level of event logging for this bundle.
OBJECT-TYPE    
  INTEGER off(0), veryLow(1), low(2), medium(3), high(4), veryHigh(5)  

csOrionMlpppBundleAdminStatus 1.3.6.1.4.1.3085.3.1.6.16.1.1.10
The desired state of the bundle.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOrionMlpppBundleOperStatus 1.3.6.1.4.1.3085.3.1.6.16.1.1.11
The actual of the bundle.
OBJECT-TYPE    
  OperStatus  

csOrionMlpppBundleRowStatus 1.3.6.1.4.1.3085.3.1.6.16.1.1.12
This object is used to create and delete PPP multilink bundles.
OBJECT-TYPE    
  RowStatus  


csOrionMlpppBundlePacketsSent 1.3.6.1.4.1.3085.3.1.6.16.1.1.14
The number of packets sent on this bundle.
OBJECT-TYPE    
  Counter32  

csOrionMlpppBundlePacketsReceived 1.3.6.1.4.1.3085.3.1.6.16.1.1.15
The number of packets received on this bundle.
OBJECT-TYPE    
  Counter32  

csOrionMlpppBundleBytesSent 1.3.6.1.4.1.3085.3.1.6.16.1.1.16
The number of bytes sent on this bundle.
OBJECT-TYPE    
  Counter32  

csOrionMlpppBundleBytesReceived 1.3.6.1.4.1.3085.3.1.6.16.1.1.17
The number of bytes received on this bundle.
OBJECT-TYPE    
  Counter32  

csOrionMlpppBundleSiteName 1.3.6.1.4.1.3085.3.1.6.16.1.1.18
A textual string containing the site name of this Mlppp Bundle interface.
OBJECT-TYPE    
  DisplayString SIZE(0..25)  

csOrionMlpppLinkTable 1.3.6.1.4.1.3085.3.1.6.16.2
This table contains information about PPP multilink links.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionMlpppLinkEntry

csOrionMlpppLinkEntry 1.3.6.1.4.1.3085.3.1.6.16.2.1
Each entry represents a PPP multilink link.
OBJECT-TYPE    
  CsOrionMlpppLinkEntry  

csOrionMlpppLinkSlotIndex 1.3.6.1.4.1.3085.3.1.6.16.2.1.1
The slot of this PPP multilink link.
OBJECT-TYPE    
  Integer32 1..26  

csOrionMlpppLinkPortIndex 1.3.6.1.4.1.3085.3.1.6.16.2.1.2
The port of this PPP multilink link.
OBJECT-TYPE    
  Integer32 1..4  

csOrionMlpppLinkChannelIndex 1.3.6.1.4.1.3085.3.1.6.16.2.1.3
Channel number of this link.
OBJECT-TYPE    
  Integer32 0..512  

csOrionMlpppLinkSubIfIndex 1.3.6.1.4.1.3085.3.1.6.16.2.1.4
The sub-interface number of this link.
OBJECT-TYPE    
  Integer32 1..512  

csOrionMlpppLinkRowStatus 1.3.6.1.4.1.3085.3.1.6.16.2.1.5
This object is used to add and remove PPP multilink links from a bundle.
OBJECT-TYPE    
  RowStatus  

csOrionMlpppInfoEnd 1.3.6.1.4.1.3085.3.1.6.16.3
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionPppoeInfo 1.3.6.1.4.1.3085.3.1.6.17
OBJECT IDENTIFIER    

csPppoeAcConfig 1.3.6.1.4.1.3085.3.1.6.17.1
OBJECT IDENTIFIER    

csPppoeAcIfConfigTable 1.3.6.1.4.1.3085.3.1.6.17.1.1
PPPoE Access Concentrators in given sub-interface (of ATM or FR).
OBJECT-TYPE    
  SEQUENCE OF  
    CsPppoeAcIfConfigEntry

csPppoeAcIfConfigEntry 1.3.6.1.4.1.3085.3.1.6.17.1.1.1
This list contains PPPoE Access Concentrator Servers.
OBJECT-TYPE    
  CsPppoeAcIfConfigEntry  

csPppoeAcIfSlotIndex 1.3.6.1.4.1.3085.3.1.6.17.1.1.1.1
This object identifies the blade to which this instance of AC is created.
OBJECT-TYPE    
  Integer32 1..'7fffffff'h  

csPppoeAcIfModuleIndex 1.3.6.1.4.1.3085.3.1.6.17.1.1.1.2
This object identifies the module of the blade to which this instance of AC is created.
OBJECT-TYPE    
  Integer32 1..'7fffffff'h  

csPppoeAcIfPortIndex 1.3.6.1.4.1.3085.3.1.6.17.1.1.1.3
This object identifies the port in the blade csPppoeAcIfSlotIndex to which this instance of AC is created.
OBJECT-TYPE    
  Integer32 1..'7fffffff'h  

csPppoeAcIfChannelIndex 1.3.6.1.4.1.3085.3.1.6.17.1.1.1.4
This object identifies the channel number.
OBJECT-TYPE    
  Integer32 0..'7fffffff'h  

csPppoeAcIfSubIfIndex 1.3.6.1.4.1.3085.3.1.6.17.1.1.1.5
This object identifies the sub-if number.
OBJECT-TYPE    
  Integer32 0..'7fffffff'h  

csPppoeAcIfConfigMaxSessions 1.3.6.1.4.1.3085.3.1.6.17.1.1.1.6
Maximum sesions that it can accepted on this AC.
OBJECT-TYPE    
  Integer32 1..64000  

csPppoeAcIfConfigMaxSessionsPerHost 1.3.6.1.4.1.3085.3.1.6.17.1.1.1.7
Maximum number of sessions that this AC can accept from a given host.
OBJECT-TYPE    
  Integer32 1..8  

csPppoeAcIfConfigTotalSessions 1.3.6.1.4.1.3085.3.1.6.17.1.1.1.8
Total Number of sessions established with this AC subjecting to maximum of csPppoeAcIfConfigMaxSessions.
OBJECT-TYPE    
  Integer32  

csPppoeAcIfConfigTotalActiveSessions 1.3.6.1.4.1.3085.3.1.6.17.1.1.1.9
Total Number of active sessions in this AC.
OBJECT-TYPE    
  Integer32  

csPppoeAcIfConfigPortEthernetAddress 1.3.6.1.4.1.3085.3.1.6.17.1.1.1.10
This object conatins the MAC Address of this PPPoE AC.
OBJECT-TYPE    
  OCTET STRING SIZE(6)  

csPppoeAcIfConfigVolunteerServiceAdvertising 1.3.6.1.4.1.3085.3.1.6.17.1.1.1.11
If this object contains 'enable' then it advertise service profiles in PADO packets
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csPppoeAcIfConfigName 1.3.6.1.4.1.3085.3.1.6.17.1.1.1.12
This object conatins the name of this PPPoE AC.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

csPppoeAcIfConfigAdminStatus 1.3.6.1.4.1.3085.3.1.6.17.1.1.1.13
This object is used to enable or disable this PPPoE AC.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csPppoeAcIfConfigOperStatus 1.3.6.1.4.1.3085.3.1.6.17.1.1.1.14
This object contains operational status of PPPoE AC. This object value depends on operational status of corresponding underneath interface.
OBJECT-TYPE    
  OperStatus  

csPppoeAcIfConfigServiceTemplateProfile 1.3.6.1.4.1.3085.3.1.6.17.1.1.1.15
This object contains service template, a list of connection profiles, serves the purpose of service name concept in PPPOE AC.
OBJECT-TYPE    
  DisplayString  

csPppoeConfigPppIfAuth 1.3.6.1.4.1.3085.3.1.6.17.1.1.1.16
The type of authentication used by PPP over pppoe sessions on this PPPoE AC server.
OBJECT-TYPE    
  INTEGER none(1), pap(2), chapmd5(3), mschapv1Server(4), mschapv2Server(5)  

csPppoeConfigPppIfEchoTimeout 1.3.6.1.4.1.3085.3.1.6.17.1.1.1.17
The echo timeout (keepalive) in seconds.
OBJECT-TYPE    
  Integer32 0..65535  

csPppoeAcIfConfigEvLogLevel 1.3.6.1.4.1.3085.3.1.6.17.1.1.1.18
This object is used to set the level for details for event logs for PPPoE AC. Events with level higher than this object will not be logged.
OBJECT-TYPE    
  EvLogLevel  

csPppoeAcIfConfigEvLogArea 1.3.6.1.4.1.3085.3.1.6.17.1.1.1.19
This object is used to set the area of event logs for ATM Port. This value will not be applied to VCCs. Events which area is not specified in this object will not be logged.
OBJECT-TYPE    
  EvLogArea  

csPppoeAcIfConfigTableEnd 1.3.6.1.4.1.3085.3.1.6.17.1.2
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csPppoeSession 1.3.6.1.4.1.3085.3.1.6.17.2
OBJECT IDENTIFIER    

csPppoeSessionTable 1.3.6.1.4.1.3085.3.1.6.17.2.1
This is the list of all PPPoE sessions in a given PPPoE Access Concentrator Server.
OBJECT-TYPE    
  SEQUENCE OF  
    CsPppoeSessionEntry

csPppoeSessionEntry 1.3.6.1.4.1.3085.3.1.6.17.2.1.1
This list contains PPPoE Sessions in a given Access Concentrator Server.
OBJECT-TYPE    
  CsPppoeSessionEntry  

csPppoeSessionUserName 1.3.6.1.4.1.3085.3.1.6.17.2.1.1.1
This object contains the user name for this session.
OBJECT-TYPE    
  DisplayString  

csPppoeSessionId 1.3.6.1.4.1.3085.3.1.6.17.2.1.1.2
This object contains the session identifier for this session as assigned by the PPPoE AC in the PADS message.
OBJECT-TYPE    
  Integer32  

csPppoeSessionOperStatus 1.3.6.1.4.1.3085.3.1.6.17.2.1.1.3
This object contains the operational status for this session.
OBJECT-TYPE    
  OperStatus  

csPppoeSessionPeerAddress 1.3.6.1.4.1.3085.3.1.6.17.2.1.1.4
This object contains the MAC address for this session peer.
OBJECT-TYPE    
  OCTET STRING SIZE(6)  

csPppoeSessionServiceName 1.3.6.1.4.1.3085.3.1.6.17.2.1.1.5
This object contains the service name for which this session is established.
OBJECT-TYPE    
  DisplayString  

csPppoeSessionDuration 1.3.6.1.4.1.3085.3.1.6.17.2.1.1.6
This object contains the duration for this session since its establishment.
OBJECT-TYPE    
  Integer32  

csPppoeSessionIPPoolNameInUse 1.3.6.1.4.1.3085.3.1.6.17.2.1.1.7
This object contains the IP Address Pool Name which is used to dynamically allocate IP Addresses.
OBJECT-TYPE    
  DisplayString  

csPppoeSessionServiceVPN 1.3.6.1.4.1.3085.3.1.6.17.2.1.1.8
This object contains the VPN number in which this PPPoE-Session is being served.
OBJECT-TYPE    
  Integer32  

csPppoeSessionServiceVR 1.3.6.1.4.1.3085.3.1.6.17.2.1.1.9
This object contains the VR Identifier in which this PPPoE Session is Served.
OBJECT-TYPE    
  IpAddress  

csPppoeSessionReceivedPkts 1.3.6.1.4.1.3085.3.1.6.17.2.1.1.10
This object contains the number of session packets received by this PPPoE Session.
OBJECT-TYPE    
  Counter64  

csPppoeSessionReceivedOctets 1.3.6.1.4.1.3085.3.1.6.17.2.1.1.11
This object contains the number of session octets received by this PPPoE Session.
OBJECT-TYPE    
  Counter64  

csPppoeSessionTranmittedPkts 1.3.6.1.4.1.3085.3.1.6.17.2.1.1.12
This object contains the number of session packets transmitted by this PPPoE Session.
OBJECT-TYPE    
  Counter64  

csPppoeSessionTransmittedOctets 1.3.6.1.4.1.3085.3.1.6.17.2.1.1.13
This object contains the number of session octets transmitted by this PPPoE Session.
OBJECT-TYPE    
  Counter64  

csPppoeSessionReceiveOperDown 1.3.6.1.4.1.3085.3.1.6.17.2.1.1.14
This object contains the number of session packets received by this PPPoE Session from its peer while its operational status is down.
OBJECT-TYPE    
  Counter64  

csPppoeSessionTransmitOperDown 1.3.6.1.4.1.3085.3.1.6.17.2.1.1.15
This object contains the number of session packets received for to transmit to peer by this PPPoE Session.
OBJECT-TYPE    
  Counter64  

csPppoeSessionReceivedErrors 1.3.6.1.4.1.3085.3.1.6.17.2.1.1.16
This object contains the number of session packets received and having protocol header errors.
OBJECT-TYPE    
  Counter64  

csPppoeSessionRowStatus 1.3.6.1.4.1.3085.3.1.6.17.2.1.1.17
The row status for this table. Used only for deleting this session. IMPORTANT: (1) entries on this table are created when a session is established. Therefore, creation of entry thru SNMP SET Request is not allowed. (2) session is usually torn down by the peer.
OBJECT-TYPE    
  RowStatus  

csPppoeSessionTableEnd 1.3.6.1.4.1.3085.3.1.6.17.2.2
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csPppoeStatistics 1.3.6.1.4.1.3085.3.1.6.17.3
OBJECT IDENTIFIER    

csPppoeAcIfStatTable 1.3.6.1.4.1.3085.3.1.6.17.3.1
The PPPoE Access Concentrators statistics counter table.
OBJECT-TYPE    
  SEQUENCE OF  
    CsPppoeAcIfStatEntry

csPppoeAcIfStatEntry 1.3.6.1.4.1.3085.3.1.6.17.3.1.1
A set of statistics for a single PPPoE Access Concentrator.
OBJECT-TYPE    
  CsPppoeAcIfStatEntry  

csPppoeAcIfStatPADIReceive 1.3.6.1.4.1.3085.3.1.6.17.3.1.1.1
This object contains the number of PADI received by this PPPoE AC.
OBJECT-TYPE    
  Counter64  

csPppoeAcIfStatPADIReject 1.3.6.1.4.1.3085.3.1.6.17.3.1.1.2
This object contains the number of PADI discarded by this PPPoE AC.
OBJECT-TYPE    
  Counter64  

csPppoeAcIfStatPADRReceive 1.3.6.1.4.1.3085.3.1.6.17.3.1.1.3
This object contains the number of PADR received by this PPPoE AC.
OBJECT-TYPE    
  Counter64  

csPppoeAcIfStatPADRReject 1.3.6.1.4.1.3085.3.1.6.17.3.1.1.4
This object contains the number of PADR discarded by this PPPoE AC.
OBJECT-TYPE    
  Counter64  

csPppoeAcIfStatPADOTransmit 1.3.6.1.4.1.3085.3.1.6.17.3.1.1.5
This object contains the number of PADO transmitted by this PPPoE AC.
OBJECT-TYPE    
  Counter64  

csPppoeAcIfStatPADSTransmit 1.3.6.1.4.1.3085.3.1.6.17.3.1.1.6
This object contains the number of PADS transmitted by this PPPoE AC.
OBJECT-TYPE    
  Counter64  

csPppoeAcIfStatPADTReceive 1.3.6.1.4.1.3085.3.1.6.17.3.1.1.7
This object contains the number of PADT received by this PPPoE AC.
OBJECT-TYPE    
  Counter64  

csPppoeAcIfStatPADTTransmit 1.3.6.1.4.1.3085.3.1.6.17.3.1.1.8
This object contains the number of PADT transmitted by this PPPoE AC.
OBJECT-TYPE    
  Counter64  

csPppoeAcIfStatGenericErrorReceive 1.3.6.1.4.1.3085.3.1.6.17.3.1.1.9
This object contains the number of PPPoE Generic-Error tags received by this PPPoE AC.
OBJECT-TYPE    
  Counter64  

csPppoeAcIfStatGenericErrorTransmit 1.3.6.1.4.1.3085.3.1.6.17.3.1.1.10
This object contains the number of PPPoE Generic-Error tags transmitted by this PPPoE AC.
OBJECT-TYPE    
  Counter64  

csPppoeAcIfStatMalformedPkts 1.3.6.1.4.1.3085.3.1.6.17.3.1.1.11
This object contains the number of malformed packets received by this PPPoE AC.
OBJECT-TYPE    
  Counter64  

csPppoeAcIfStatServiceNameErrors 1.3.6.1.4.1.3085.3.1.6.17.3.1.1.12
This object contains the number of PPPoE Service-Name-Error tags received/transmitted by this PPPoE AC.
OBJECT-TYPE    
  Counter64  

csPppoeAcIfStatACSystemErrors 1.3.6.1.4.1.3085.3.1.6.17.3.1.1.13
This object contains the number of PPPoE AC-System-Error tags received/transmitted by this PPPoE AC.
OBJECT-TYPE    
  Counter64  

csPppoeAcIfStatPppAuthFails 1.3.6.1.4.1.3085.3.1.6.17.3.1.1.14
This object contains the number of PPP authentication failures for sessions created on PPPoE AC.
OBJECT-TYPE    
  Counter64  

csPppoeAcIfStatAccessVRFails 1.3.6.1.4.1.3085.3.1.6.17.3.1.1.15
This object contains the number of failures while contacting Access VR for service names on PPPoE AC.
OBJECT-TYPE    
  Counter64  

csOrionPpoeInfoEnd 1.3.6.1.4.1.3085.3.1.6.17.4
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionServiceSelectionInfo 1.3.6.1.4.1.3085.3.1.6.18
OBJECT IDENTIFIER    

csOrionVrIfManagerTable 1.3.6.1.4.1.3085.3.1.6.18.1
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionVrIfManagerEntry

csOrionVrIfManagerEntry 1.3.6.1.4.1.3085.3.1.6.18.1.1
OBJECT-TYPE    
  CsOrionVrIfManagerEntry  

csOrionVrIfManagerSlotIndex 1.3.6.1.4.1.3085.3.1.6.18.1.1.1
This object identifies the slot ID.
OBJECT-TYPE    
  Integer32 1..'7fffffff'h  

csOrionVrIfManagerModuleIndex 1.3.6.1.4.1.3085.3.1.6.18.1.1.2
This object identifies the module ID.
OBJECT-TYPE    
  Integer32 1..'7fffffff'h  

csOrionVrIfManagerPortIndex 1.3.6.1.4.1.3085.3.1.6.18.1.1.3
This object identifies the port ID.
OBJECT-TYPE    
  Integer32 1..'7fffffff'h  

csOrionVrIfManagerChannelIndex 1.3.6.1.4.1.3085.3.1.6.18.1.1.4
This object identifies the channel ID.
OBJECT-TYPE    
  Integer32 0..'7fffffff'h  

csOrionVrIfManagerSubifIndex 1.3.6.1.4.1.3085.3.1.6.18.1.1.5
This object identifies the subif ID.
OBJECT-TYPE    
  Integer32 0..'7fffffff'h  

csOrionVrIfManagerRowStatus 1.3.6.1.4.1.3085.3.1.6.18.1.1.6
The row status for this table.
OBJECT-TYPE    
  RowStatus  

csOrionConnectionProfileTable 1.3.6.1.4.1.3085.3.1.6.18.2
This table contains a list of connection profiles.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionConnectionProfileEntry

csOrionConnectionProfileEntry 1.3.6.1.4.1.3085.3.1.6.18.2.1
This entry represents a single connection profile.
OBJECT-TYPE    
  CsOrionConnectionProfileEntry  

csOrionConnectionProfileName 1.3.6.1.4.1.3085.3.1.6.18.2.1.1
The name of this connection profile.
OBJECT-TYPE    
  LongDisplayString SIZE(0..256)  

csOrionConnectionProfileVpnId 1.3.6.1.4.1.3085.3.1.6.18.2.1.2
The VPN Id this profile applies to.
OBJECT-TYPE    
  Integer32 0..2147483647  

csOrionConnectionProfileVrId 1.3.6.1.4.1.3085.3.1.6.18.2.1.3
The VR Id this profile applies to.
OBJECT-TYPE    
  IpAddress  

csOrionConnectionProfileAddrPoolname 1.3.6.1.4.1.3085.3.1.6.18.2.1.4
The local IP address poolname in the VR.
OBJECT-TYPE    
  LongDisplayString SIZE(0..256)  

csOrionConnectionProfileLnsAddress 1.3.6.1.4.1.3085.3.1.6.18.2.1.5
The LNS IP address this profile applies to.
OBJECT-TYPE    
  IpAddress  

csOrionConnectionProfileRowStatus 1.3.6.1.4.1.3085.3.1.6.18.2.1.6
The row status for this table.
OBJECT-TYPE    
  RowStatus  

csOrionServiceTemplateTable 1.3.6.1.4.1.3085.3.1.6.18.3
This table contains a list of names of service selections. Each of this entry will hold a list of connection profiles. Refer to expansion table csOrionServiceTemplateConnProfileTable.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionServiceTemplateEntry

csOrionServiceTemplateEntry 1.3.6.1.4.1.3085.3.1.6.18.3.2
This entry represents a single service selection.
OBJECT-TYPE    
  CsOrionServiceTemplateEntry  

csOrionServiceTemplateName 1.3.6.1.4.1.3085.3.1.6.18.3.2.1
The service selection template name.
OBJECT-TYPE    
  LongDisplayString SIZE(0..256)  

csOrionServiceTemplateRowStatus 1.3.6.1.4.1.3085.3.1.6.18.3.2.2
The row status for this table.
OBJECT-TYPE    
  RowStatus  

csOrionServiceTemplateConnProfileTable 1.3.6.1.4.1.3085.3.1.6.18.4
This table contains a list of connection profiles contained in a single service selection template.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionServiceTemplateConnProfileEntry

csOrionServiceTemplateConnProfileEntry 1.3.6.1.4.1.3085.3.1.6.18.4.2
This entry represents a single connection profile on a service selection.
OBJECT-TYPE    
  CsOrionServiceTemplateConnProfileEntry  

csOrionServiceTemplateConnProfileName 1.3.6.1.4.1.3085.3.1.6.18.4.2.1
The name of the connection profile to be added in the table. NOTE: Must be an existing csOrionConnectionProfileName.
OBJECT-TYPE    
  LongDisplayString SIZE(0..256)  

csOrionServiceTemplateConnProfileRowStatus 1.3.6.1.4.1.3085.3.1.6.18.4.2.2
The row status for this table.
OBJECT-TYPE    
  RowStatus  

csOrionServiceSelectionInfoEnd 1.3.6.1.4.1.3085.3.1.6.18.5
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionNBNSInfo 1.3.6.1.4.1.3085.3.1.6.19
OBJECT IDENTIFIER    

csOrionVrNbnsConfigTable 1.3.6.1.4.1.3085.3.1.6.19.1
This table contains NBNS configuration parameters.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionVrNbnsConfigEntry

csOrionVrNbnsConfigEntry 1.3.6.1.4.1.3085.3.1.6.19.1.1
Each entry represents the NBNS configuration parameters for a single VR.
OBJECT-TYPE    
  CsOrionVrNbnsConfigEntry  

csOrionVrPrimaryNbnsServer 1.3.6.1.4.1.3085.3.1.6.19.1.1.1
The primary NBNS server for this VR.
OBJECT-TYPE    
  IpAddress  

csOrionVrSecondaryNbnsServer 1.3.6.1.4.1.3085.3.1.6.19.1.1.2
The secondary NBNS server for this VR.
OBJECT-TYPE    
  IpAddress  

csOrionNBNSInfoEnd 1.3.6.1.4.1.3085.3.1.6.19.2
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionSpfInfo 1.3.6.1.4.1.3085.3.1.6.20
OBJECT IDENTIFIER    

csOrionVrSpfConfTable 1.3.6.1.4.1.3085.3.1.6.20.1
This table contains SPF configuration parameters.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionVrSpfConfEntry

csOrionVrSpfConfEntry 1.3.6.1.4.1.3085.3.1.6.20.1.1
This table specifies a set of configurable parameters for the SPF module within each VR.
OBJECT-TYPE    
  CsOrionVrSpfConfEntry  

csOrionVrSpfConnTblSize 1.3.6.1.4.1.3085.3.1.6.20.1.1.1
This Size puts an upper limit on the total number of sessions (inclusive of TCP and UDP) that this VR will accept, connections beyond this number will be dropped.
OBJECT-TYPE    
  Integer32 1..200000  

csOrionVrSpfTcpInitTblSize 1.3.6.1.4.1.3085.3.1.6.20.1.1.2
This Size puts an upper limit on the number of TCP sessions that can remain in the SYN state at any given time, this limits the ability to accept new TCP connections simultaneously.
OBJECT-TYPE    
  Integer32 1..1000  

csOrionVrSpfUdpInitTblSize 1.3.6.1.4.1.3085.3.1.6.20.1.1.3
This Size puts an upper limit on the number of UDP sessions that can remain in the unmatched state at any given time, this limits the ability to accept new UDP connections simultaneously.
OBJECT-TYPE    
  Integer32 1..5000  

csOrionVrSpfTcpSeqCheck 1.3.6.1.4.1.3085.3.1.6.20.1.1.4
If enabled, the tcp packets will be checked for validity of sequence number, this is done at init time, established state and close time.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOrionVrSpfTcpInitTimeout 1.3.6.1.4.1.3085.3.1.6.20.1.1.5
This time out value decides how long a TCP session can remain in SYN state without the session establishment process reaching completion, the session is deleted after the expiry of this period.
OBJECT-TYPE    
  Integer32 1..60  

csOrionVrSpfTcpIdleTimeout 1.3.6.1.4.1.3085.3.1.6.20.1.1.6
This timeout value decides how long a TCP session can hang around without any activity(or Idle), such entries are deleted after the expiry of this period and end peers reset.
OBJECT-TYPE    
  Integer32 -1..64800  

csOrionVrSpfTcpCloseTimeout 1.3.6.1.4.1.3085.3.1.6.20.1.1.7
This decides the lifetime of the TIME_WAIT state in the TCP session closure sequence.
OBJECT-TYPE    
  Integer32 1..900  

csOrionVrSpfUdpIdleTimeout 1.3.6.1.4.1.3085.3.1.6.20.1.1.8
This is the Idle timeout period for UDp sessions.
OBJECT-TYPE    
  Integer32 1..600  

csOrionVrSpfIcmpIdleTimeout 1.3.6.1.4.1.3085.3.1.6.20.1.1.9
This is the idle timeout period for ICMP sessions.
OBJECT-TYPE    
  Integer32 1..60  

csOrionVrSpfTcpCurrentConnTableEntries 1.3.6.1.4.1.3085.3.1.6.20.1.1.10
This is the number of TCP sessions in the Connection Table right now.
OBJECT-TYPE    
  Integer32 0..2147483647  

csOrionVrSpfUdpCurrentConnTableEntries 1.3.6.1.4.1.3085.3.1.6.20.1.1.11
This is the number of UDP sessions in the Connection Table right now.
OBJECT-TYPE    
  Integer32 0..214748364  

csOrionVrSpfIcmpCurrentConnTableEntries 1.3.6.1.4.1.3085.3.1.6.20.1.1.12
This is the number of ICMP sessions in the Connection Table right now.
OBJECT-TYPE    
  Integer32 0..214748364  

csOrionVrSpfTcpTotalConnTableEntries 1.3.6.1.4.1.3085.3.1.6.20.1.1.13
This is the total number of TCP sessions seen by the Connection Table.
OBJECT-TYPE    
  Integer32 0..214748364  

csOrionVrSpfUdpTotalConnTableEntries 1.3.6.1.4.1.3085.3.1.6.20.1.1.14
This is the total number of UDP sessions seen by the Connection Table.
OBJECT-TYPE    
  Integer32 0..214748364  

csOrionVrSpfIcmpTotalConnTableEntries 1.3.6.1.4.1.3085.3.1.6.20.1.1.15
This is the total number of ICMP sessions seen by the Connection Table.
OBJECT-TYPE    
  Integer32 0..214748364  

csOrionVrSpfTcpSynTableEntries 1.3.6.1.4.1.3085.3.1.6.20.1.1.16
This is the total number of TCP SYN sessions in the TCP Initialization Table.
OBJECT-TYPE    
  Integer32 0..1000  

csOrionVrSpfUdpUnmatchedTableEntries 1.3.6.1.4.1.3085.3.1.6.20.1.1.17
This is the total number of UDP sessions in the UDP Initialization Table.
OBJECT-TYPE    
  Integer32 0..5000  

csOrionVrSpfCleanTablesFlag 1.3.6.1.4.1.3085.3.1.6.20.1.1.18
This is a flag to tell SPF to remove all entries fom the tables.
OBJECT-TYPE    
  Integer32 0..1  

csOrionSpfInfoEnd 1.3.6.1.4.1.3085.3.1.6.20.2
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionAAAServiceInfo 1.3.6.1.4.1.3085.3.1.6.21
OBJECT IDENTIFIER    

csOrionAAAServerConfigTable 1.3.6.1.4.1.3085.3.1.6.21.1
This table contains AAA server configuration parameters.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionAAAServerConfigEntry

csOrionAAAServerConfigEntry 1.3.6.1.4.1.3085.3.1.6.21.1.1
Each entry represents the configuration parameters for a single AAA server in this VR.
OBJECT-TYPE    
  CsOrionAAAServerConfigEntry  

csOrionAAAServerType 1.3.6.1.4.1.3085.3.1.6.21.1.1.1
The type of AAA server.
OBJECT-TYPE    
  INTEGER ldap(1), radius(2)  

csOrionAAAServerName 1.3.6.1.4.1.3085.3.1.6.21.1.1.2
Name given for this AAA server. Name has to be unique regardless of csOrionAAAServerType.
OBJECT-TYPE    
  DisplayString SIZE(1..80)  

csOrionAAAServerIpAddress 1.3.6.1.4.1.3085.3.1.6.21.1.1.3
IP Address for this server.
OBJECT-TYPE    
  IpAddress  

csOrionAAAServerPort 1.3.6.1.4.1.3085.3.1.6.21.1.1.4
Port on which this AAA server is listening for messages. Radius client uses the default port 1812 for AA requests. Ldap client uses the default port 389 for AA requests. For rows where csAAAServerType is local, this object has no meaning.
OBJECT-TYPE    
  Integer32 0..65535  

csOrionAAAServerRetransmit 1.3.6.1.4.1.3085.3.1.6.21.1.1.5
The number of times a AAA Server will be queried before moving to the next AAA Server in the list identified by csOrionAAAServerList. This object cannot be set for LDAP server, which is subject to TCP retransmission constraint and cannot be modified. TCP retries 12 times; the first timeout is 1.5 seconds, the subsequent retry timeout is twice as the previous one but no more than 64 seconds.
OBJECT-TYPE    
  Integer32 0..64  

csOrionAAAServerTimeout 1.3.6.1.4.1.3085.3.1.6.21.1.1.6
The amount of time (in seconds) to wait for a response from this AAA Server before timing out. This object cannot be set for LDAP server, which is subject to TCP timeout constraint and cannot be modified. TCP retries 12 times; the first timeout is 1.5 seconds, the subsequent retry timeout is twice as the previous one but no more than 64 seconds.
OBJECT-TYPE    
  Integer32 1..128  

csOrionAAAServerRadiusKey 1.3.6.1.4.1.3085.3.1.6.21.1.1.7
The authentication and encryption key shared between the Radius client and this Radius Server. Applicable only if the server is of radius type.
OBJECT-TYPE    
  OCTET STRING SIZE(0..80)  

csOrionAAAServerLdapUsername 1.3.6.1.4.1.3085.3.1.6.21.1.1.8
Distinguished Name of the LDAP user. Applicable only if the server is of ldap type.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionAAAServerLdapPassword 1.3.6.1.4.1.3085.3.1.6.21.1.1.9
Password of the LDAP user. Applicable only if the server is of ldap type.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

csOrionAAAServerLdapSearchBase 1.3.6.1.4.1.3085.3.1.6.21.1.1.10
Starting point in the directory hierarchy to perform search operations. Applicable only if the server is of ldap type.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

csOrionAAAServerLdapSearchFilter 1.3.6.1.4.1.3085.3.1.6.21.1.1.11
A filter that defines the conditions that must be fulfilled in order for the search to match a given entry. This must conform to RFC 2254 LDAP Search Filter String Representation. Applicable only if the server is of ldap type.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

csOrionAAAServerRowStatus 1.3.6.1.4.1.3085.3.1.6.21.1.1.12
Used to create a row (createAndGo) or destroy a row. Once the row is created, get on this object will always yield active(1).
OBJECT-TYPE    
  INTEGER active(1), createAndGo(4), destroy(6)  

csOrionAAAServerConfigTableEnd 1.3.6.1.4.1.3085.3.1.6.21.2
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionAAAServerListConfigTable 1.3.6.1.4.1.3085.3.1.6.21.3
This table contains AAA server list configuration parameters. An AAA server list is a prioritized collection of AAA servers as defined in csOrionAAAServerConfigTable.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionAAAServerListConfigEntry

csOrionAAAServerListConfigEntry 1.3.6.1.4.1.3085.3.1.6.21.3.1
Each entry points to a single AAA server as defined in csOrionAAAServerConfigTable. This server has a unique priority within the list.
OBJECT-TYPE    
  CsOrionAAAServerListConfigEntry  

csOrionAAAServerListType 1.3.6.1.4.1.3085.3.1.6.21.3.1.1
This object defines the kind of AAA servers that are contained in this list. If this object has a value of authentication(1), then all servers in this list are to be used for authentication purposes. If the server is of radius type, then it is also used for authorization. If this object has a value of authorization(2), then all servers in this list are to be used for authorization purposes. Note that only ldap servers can be added to this list. If this object has a value of accounting(4), then all servers in this list are to be used for accounting purposes. Note that only radius servers can be added to this list.
OBJECT-TYPE    
  INTEGER authentication(1), authorization(2), accounting(4)  

csOrionAAAServerListName 1.3.6.1.4.1.3085.3.1.6.21.3.1.2
The name given to the collection of AAA servers. An application refers to this name when specifying which group of servers to use for AAA purposes. This object has to be set during creation.
OBJECT-TYPE    
  DisplayString SIZE(1..80)  

csOrionAAAServerListPriority 1.3.6.1.4.1.3085.3.1.6.21.3.1.3
The relative priority of the server in this list. Lower number means higher priority.
OBJECT-TYPE    
  Integer32 1..100  

csOrionAAAServerListSvrName 1.3.6.1.4.1.3085.3.1.6.21.3.1.4
The name of the AAA server as defined in csOrionAAAServerConfigTable. A value of 'local' for this object means that the authentication is done locally.
OBJECT-TYPE    
  DisplayString SIZE(1..80)  

csOrionAAAServerListSvrType 1.3.6.1.4.1.3085.3.1.6.21.3.1.5
The type of AAA server. undefined(-1) means the corresponding AAA server is not yet defined, i.e., no entry in csOrionAAAServerConfigTable with a name as defined in csOrionAAAServerListSvrName. local(3) means that authentication is to be done locally.
OBJECT-TYPE    
  INTEGER undefined(-1), ldap(1), radius(2), local(3)  

csOrionAAAServerListRowStatus 1.3.6.1.4.1.3085.3.1.6.21.3.1.6
Used to create a row (createAndGo) or destroy a row. When setting this object to createAndGo, csOrionAAAServerListSvrName must also be set. Once the row is created, get on this object will always yield active(1).
OBJECT-TYPE    
  INTEGER active(1), createAndGo(4), destroy(6)  

csOrionAAAServerListConfigTableEnd 1.3.6.1.4.1.3085.3.1.6.21.4
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionAAAServerListAdminTable 1.3.6.1.4.1.3085.3.1.6.21.5
This table contains a RowStatus object to destroy an AAA server list defined in csOrionAAAServerListConfigTable. This provides a quick way to destroy the list without having to destroy each csOrionAAAServerListConfigEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionAAAServerListAdminEntry

csOrionAAAServerListAdminEntry 1.3.6.1.4.1.3085.3.1.6.21.5.1
Each entry represents an AAA server list.
OBJECT-TYPE    
  CsOrionAAAServerListAdminEntry  

csOrionAAAServerListAdminRowStatus 1.3.6.1.4.1.3085.3.1.6.21.5.1.1
Setting this object to destroy(6) will destroy the whole AAA service list with {type, name} specified in {csOrionAAAServerListConfigType, csOrionAAAServerListConfigName}.
OBJECT-TYPE    
  INTEGER active(1), destroy(6)  

csOrionAAAServiceInfoEnd 1.3.6.1.4.1.3085.3.1.6.21.6
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionMeter 1.3.6.1.4.1.3085.3.1.6.22
OBJECT IDENTIFIER    

csOrionQoSMeterProfileTable 1.3.6.1.4.1.3085.3.1.6.22.1
This table specifies the template of the metering control block. This template can be applied to any of the metering contexts under QoS of VR and VI
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionQoSMeterProfileEntry

csOrionQoSMeterProfileEntry 1.3.6.1.4.1.3085.3.1.6.22.1.1
Each entry specifies unique Metering profile
OBJECT-TYPE    
  CsOrionQoSMeterProfileEntry  

csOrionQoSMeterProfileName 1.3.6.1.4.1.3085.3.1.6.22.1.1.1
The Index of this table.
OBJECT-TYPE    
  DisplayString  

csOrionQoSMeterProfileCBS 1.3.6.1.4.1.3085.3.1.6.22.1.1.2
Committed Burst Size
OBJECT-TYPE    
  Integer32 0..'7fffffff'h  

csOrionQoSMeterProfilePBS 1.3.6.1.4.1.3085.3.1.6.22.1.1.3
Peak Burst Size
OBJECT-TYPE    
  Integer32 0..'7fffffff'h  

csOrionQoSMeterProfileCIR 1.3.6.1.4.1.3085.3.1.6.22.1.1.4
Committed Information Rate
OBJECT-TYPE    
  Integer32 0..'7fffffff'h  

csOrionQoSMeterProfileMIR 1.3.6.1.4.1.3085.3.1.6.22.1.1.5
Maximum Information Rate
OBJECT-TYPE    
  Integer32 0..'7fffffff'h  

csOrionQoSMeterProfileDropPrecedence 1.3.6.1.4.1.3085.3.1.6.22.1.1.6
Drop option. If set to 'red' it will drop incoming red packets belonging to this ACL group. If set to 'redYellow' it will drop both red and yellow packets.
OBJECT-TYPE    
  INTEGER none(1), red(2), redYellow(3)  

csOrionQoSMeterProfileColorMode 1.3.6.1.4.1.3085.3.1.6.22.1.1.7
Color marker metering mode.
OBJECT-TYPE    
  INTEGER colorBlind(1), colorAware(2)  

csOrionQoSMeterProfileStatus 1.3.6.1.4.1.3085.3.1.6.22.1.1.8
Creates or deletes the profile
OBJECT-TYPE    
  RowStatus  

csOrionQoSMeterTable 1.3.6.1.4.1.3085.3.1.6.22.2
This table specifies the metering control block for each of the traffic flows
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionQoSMeterEntry

csOrionQoSMeterEntry 1.3.6.1.4.1.3085.3.1.6.22.2.1
Metering context entries
OBJECT-TYPE    
  CsOrionQoSMeterEntry  

csOrionQoSMeterName 1.3.6.1.4.1.3085.3.1.6.22.2.1.1
Name of the metering control block(MCB) - index to this table
OBJECT-TYPE    
  DisplayString  

csOrionQoSMeterProfile 1.3.6.1.4.1.3085.3.1.6.22.2.1.2
Name of the metering profile to be applied to this MCB
OBJECT-TYPE    
  DisplayString  

csOrionQoSMeterTotalPackets 1.3.6.1.4.1.3085.3.1.6.22.2.1.3
Total number of packets metered for this flow
OBJECT-TYPE    
  Counter32  

csOrionQoSMeterRedByteCount 1.3.6.1.4.1.3085.3.1.6.22.2.1.4
Number of red bytes on this flow.
OBJECT-TYPE    
  Counter32  

csOrionQoSMeterYellowByteCount 1.3.6.1.4.1.3085.3.1.6.22.2.1.5
Number of yellow bytes on this flow.
OBJECT-TYPE    
  Counter32  

csOrionQoSMeterGreenByteCount 1.3.6.1.4.1.3085.3.1.6.22.2.1.6
Number of green bytes on this flow.
OBJECT-TYPE    
  Counter32  

csOrionQoSMeterAclList 1.3.6.1.4.1.3085.3.1.6.22.2.1.7
ACLs that are associated with the metering control block
OBJECT-TYPE    
  DisplayString  

csOrionQoSMeterStatus 1.3.6.1.4.1.3085.3.1.6.22.2.1.8
Creates or deletes the profile
OBJECT-TYPE    
  RowStatus  

csOrionVrQoSFilterTable 1.3.6.1.4.1.3085.3.1.6.22.3
This table specifies the metering control block for each of the traffic flows
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionVrQoSFilterEntry

csOrionVrQoSFilterEntry 1.3.6.1.4.1.3085.3.1.6.22.3.1
Metering context entries
OBJECT-TYPE    
  CsOrionVrQoSFilterEntry  

csOrionVrQoSFilterIndex 1.3.6.1.4.1.3085.3.1.6.22.3.1.1
index to this table.
OBJECT-TYPE    
  Integer32 1..65535  

csOrionVrQoSFilterAclId 1.3.6.1.4.1.3085.3.1.6.22.3.1.2
The ACL id is the index to this table. Prior to using this, the ACL with index equal to this object value must be created
OBJECT-TYPE    
  Integer32 1..65535  

csOrionVrQoSFilterMeterName 1.3.6.1.4.1.3085.3.1.6.22.3.1.3
This specifies which of the metering profile(template) to apply to this metering block
OBJECT-TYPE    
  DisplayString  

csOrionVrQoSFilterServiceCategory 1.3.6.1.4.1.3085.3.1.6.22.3.1.4
Priority with which the traffic is sent out
OBJECT-TYPE    
  INTEGER ef-guaranteed(1), ef(2), af1(3), af2(4), af3(5), af4(6), be(7)  

csOrionVrQoSFilterStatus 1.3.6.1.4.1.3085.3.1.6.22.3.1.5
Creates or deletes the profile
OBJECT-TYPE    
  RowStatus  

csOrionViQoSFilterTable 1.3.6.1.4.1.3085.3.1.6.22.4
This table specifies the metering control block for each of the traffic flows
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionViQoSFilterEntry

csOrionViQoSFilterEntry 1.3.6.1.4.1.3085.3.1.6.22.4.1
Metering context entries
OBJECT-TYPE    
  CsOrionViQoSFilterEntry  

csOrionViQoSFilterIndex 1.3.6.1.4.1.3085.3.1.6.22.4.1.1
index to this table.
OBJECT-TYPE    
  Integer32 1..65535  

csOrionViQoSFilterAclId 1.3.6.1.4.1.3085.3.1.6.22.4.1.2
The ACL id is the index to this table. Prior to using this, the ACL with index equal to this object value must be created
OBJECT-TYPE    
  Integer32 1..65535  

csOrionViQoSFilterMeterName 1.3.6.1.4.1.3085.3.1.6.22.4.1.3
This specifies which of the metering profile(template) to apply to this metering block
OBJECT-TYPE    
  DisplayString  

csOrionViQoSFilterServiceCategory 1.3.6.1.4.1.3085.3.1.6.22.4.1.4
Priority with which the traffic is sent out
OBJECT-TYPE    
  INTEGER ef-guaranteed(1), ef(2), af1(3), af2(4), af3(5), af4(6), be(7)  

csOrionViQoSFilterStatus 1.3.6.1.4.1.3085.3.1.6.22.4.1.5
Creates or deletes the profile
OBJECT-TYPE    
  RowStatus  

csOrionMeterEnd 1.3.6.1.4.1.3085.3.1.6.22.5
End of this group. value undefined
OBJECT-TYPE    
  Integer32  

csOrionHWControlInfo 1.3.6.1.4.1.3085.3.1.7
OBJECT IDENTIFIER    

csOrionPowerSupplyTable 1.3.6.1.4.1.3085.3.1.7.1
A table for power supplies.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionPowerSupplyEntry

csOrionPowerSupplyEntry 1.3.6.1.4.1.3085.3.1.7.1.1
An entry containing power supply state information.
OBJECT-TYPE    
  CsOrionPowerSupplyEntry  

csOrionPowerSupplyIndex 1.3.6.1.4.1.3085.3.1.7.1.1.1
An index for a power supply table.
OBJECT-TYPE    
  Integer32 1..4  

csOrionPowerSupplyInputPowerState 1.3.6.1.4.1.3085.3.1.7.1.1.2
A power supply's input power state.
OBJECT-TYPE    
  INTEGER ok(1), not-ok(2)  

csOrionPowerSupplyOutputPowerState 1.3.6.1.4.1.3085.3.1.7.1.1.3
A power supply's output power state.
OBJECT-TYPE    
  INTEGER ok(1), not-ok(2)  

csOrionFanTable 1.3.6.1.4.1.3085.3.1.7.2
A table for fans.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionFanEntry

csOrionFanEntry 1.3.6.1.4.1.3085.3.1.7.2.1
An entry containing management information applicable to fans.
OBJECT-TYPE    
  CsOrionFanEntry  

csOrionFanIndex 1.3.6.1.4.1.3085.3.1.7.2.1.1
An index for a fan table.
OBJECT-TYPE    
  Integer32 1..16  

csOrionFanState 1.3.6.1.4.1.3085.3.1.7.2.1.2
A fan operational state.
OBJECT-TYPE    
  INTEGER ok(1), not-ok(2)  

csOrionFanSpeed 1.3.6.1.4.1.3085.3.1.7.2.1.3
A fan speed (in RPS: Revolutions Per Second).
OBJECT-TYPE    
  Gauge32  

csOrionPowerSupplyControlInfo 1.3.6.1.4.1.3085.3.1.7.3
OBJECT IDENTIFIER    

csOrionPowerSupplyHWRevision 1.3.6.1.4.1.3085.3.1.7.3.1
The hardward revision information of the power supply controller.
OBJECT-TYPE    
  DisplayString SIZE(0..3)  

csOrionPowerSupplyFWMajorRevision 1.3.6.1.4.1.3085.3.1.7.3.2
The major firmware revision information of the power supply controller.
OBJECT-TYPE    
  DisplayString SIZE(0..3)  

csOrionPowerSupplyFWMinorRevision 1.3.6.1.4.1.3085.3.1.7.3.3
The minor firmware revision information of the power supply controller.
OBJECT-TYPE    
  DisplayString SIZE(0..3)  

csOrionPowerSupplyFWRelease 1.3.6.1.4.1.3085.3.1.7.3.4
The firmware release of the power supply controller.
OBJECT-TYPE    
  DisplayString SIZE(0..3)  

csOrionPowerSupplyFWReleaseDate 1.3.6.1.4.1.3085.3.1.7.3.5
A textual string containing information about the date of the firmware release.
OBJECT-TYPE    
  DisplayString SIZE(0..8)  

csOrionPowerSupplyEventTrapGeneration 1.3.6.1.4.1.3085.3.1.7.3.6
This object is used to enable/disable the generation of events and traps of the power supply.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOrionFanTempSensorTable 1.3.6.1.4.1.3085.3.1.7.4
A table for fans.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionFanTempSensorEntry

csOrionFanTempSensorEntry 1.3.6.1.4.1.3085.3.1.7.4.1
An entry containing management information applicable to fans.
OBJECT-TYPE    
  CsOrionFanTempSensorEntry  

csOrionFanTempSensorState 1.3.6.1.4.1.3085.3.1.7.4.1.1
the temperature sensor's operational status of a fan.
OBJECT-TYPE    
  INTEGER ok(1), not-ok(2)  

csOrionFanTempSensorTemperature 1.3.6.1.4.1.3085.3.1.7.4.1.2
A temperature (in Fahrenheit or Celsius) of the Fan.
OBJECT-TYPE    
  Integer32 -67..257  

csOrionFanTrayControlTable 1.3.6.1.4.1.3085.3.1.7.5
There is a controller for each of the fan tray. This table contains entries of the hardware and firmware revision information and entries used to enable/disable the event/trap generation.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionFanTrayControlEntry

csOrionFanTrayControlEntry 1.3.6.1.4.1.3085.3.1.7.5.1
An entry containing PIC H/W and F/W Revision information applicable to fan tray controllers.
OBJECT-TYPE    
  CsOrionFanTrayControlEntry  

csOrionFanTray 1.3.6.1.4.1.3085.3.1.7.5.1.1
Identifies the upper or lower fan tray.
OBJECT-TYPE    
  INTEGER lowerOrFront(1), upperOrRear(2)  

csOrionFanTrayHWRevision 1.3.6.1.4.1.3085.3.1.7.5.1.2
Fan tray's hardward Revision information
OBJECT-TYPE    
  DisplayString SIZE(0..3)  

csOrionFanTrayFWMajorRevision 1.3.6.1.4.1.3085.3.1.7.5.1.3
Fan tray's firmware major Revision information.
OBJECT-TYPE    
  DisplayString SIZE(0..3)  

csOrionFanTrayFWMinorRevision 1.3.6.1.4.1.3085.3.1.7.5.1.4
Fan tray's firmware minor Revision information.
OBJECT-TYPE    
  DisplayString SIZE(0..3)  

csOrionFanTrayFWRelease 1.3.6.1.4.1.3085.3.1.7.5.1.5
The firmware release of the fan tray controller.
OBJECT-TYPE    
  DisplayString SIZE(0..3)  

csOrionFanTrayFWReleaseDate 1.3.6.1.4.1.3085.3.1.7.5.1.6
A textual string containing information about the date of the firmware release.
OBJECT-TYPE    
  DisplayString SIZE(0..8)  

csOrionFanTrayEventTrapGeneration 1.3.6.1.4.1.3085.3.1.7.5.1.7
Fan tray's firmware minor Revision information.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOrionStatusPanelControlInfo 1.3.6.1.4.1.3085.3.1.7.6
OBJECT IDENTIFIER    

csOrionStatusPanelHWRevision 1.3.6.1.4.1.3085.3.1.7.6.1
The hardward revision information of the status panel controller.
OBJECT-TYPE    
  DisplayString SIZE(0..3)  

csOrionStatusPanelFWMajorRevision 1.3.6.1.4.1.3085.3.1.7.6.2
The major firmware revision information of the status panel controller.
OBJECT-TYPE    
  DisplayString SIZE(0..3)  

csOrionStatusPanelFWMinorRevision 1.3.6.1.4.1.3085.3.1.7.6.3
The minor firmware revision information of the status panel controller.
OBJECT-TYPE    
  DisplayString SIZE(0..3)  

csOrionStatusPanelFWRelease 1.3.6.1.4.1.3085.3.1.7.6.4
The firmware release of the power supply controller.
OBJECT-TYPE    
  DisplayString SIZE(0..3)  

csOrionStatusPanelFWReleaseDate 1.3.6.1.4.1.3085.3.1.7.6.5
A textual string containing information about the date of the firmware release.
OBJECT-TYPE    
  DisplayString SIZE(0..8)  

csOrionTemperatureAirFlowCardInfo 1.3.6.1.4.1.3085.3.1.7.7
OBJECT IDENTIFIER    

csOrionTempAirFlowCardTable 1.3.6.1.4.1.3085.3.1.7.7.1
A table for temperature air flow card.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionTempAirFlowCardEntry

csOrionTempAirFlowCardEntry 1.3.6.1.4.1.3085.3.1.7.7.1.1
An entry containing management information applicable to temperature air flow card.
OBJECT-TYPE    
  CsOrionTempAirFlowCardEntry  

csOrionAirFlowCardIndex 1.3.6.1.4.1.3085.3.1.7.7.1.1.1
Identifies the temperature air flow card.
OBJECT-TYPE    
  INTEGER front(1), rear(2)  

csOrionAirFlowCardHWRevision 1.3.6.1.4.1.3085.3.1.7.7.1.1.2
The air flow card's hardward Revision information.
OBJECT-TYPE    
  DisplayString SIZE(0..3)  

csOrionAirFlowCardFWMajorRevision 1.3.6.1.4.1.3085.3.1.7.7.1.1.3
The air flow card's firmwar major Revision information.
OBJECT-TYPE    
  DisplayString SIZE(0..3)  

csOrionAirFlowCardFWMinorRevision 1.3.6.1.4.1.3085.3.1.7.7.1.1.4
The air flow card's firmware minor Revision information.
OBJECT-TYPE    
  DisplayString SIZE(0..3)  

csOrionAirFlowCardFWRelease 1.3.6.1.4.1.3085.3.1.7.7.1.1.5
The air flow card's firmware release information.
OBJECT-TYPE    
  DisplayString SIZE(0..3)  

csOrionAirFlowCardFWReleaseDate 1.3.6.1.4.1.3085.3.1.7.7.1.1.6
A textual string containing information about the date of the firmwre release.
OBJECT-TYPE    
  DisplayString SIZE(0..8)  

csOrionAirFlowCardTemperature 1.3.6.1.4.1.3085.3.1.7.7.1.1.7
The air flow card's temperature.
OBJECT-TYPE    
  Integer32 -67..257  

csOrionAirFlowCardTempState 1.3.6.1.4.1.3085.3.1.7.7.1.1.8
An inlet air flow temperature sensor operational state.
OBJECT-TYPE    
  INTEGER ok(1), not-ok(2)  

csOrionAirFlowCardEventTrapGeneration 1.3.6.1.4.1.3085.3.1.7.7.1.1.9
The air flow card's trap/event generation status.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOrionBackplaneInfo 1.3.6.1.4.1.3085.3.1.8
OBJECT IDENTIFIER    

csOrionBackplaneUtilization 1.3.6.1.4.1.3085.3.1.8.1
A % of utilization for backplane.
OBJECT-TYPE    
  Gauge32  

csOrionSnmpInfo 1.3.6.1.4.1.3085.3.1.9
OBJECT IDENTIFIER    

csOrionGenSnmp 1.3.6.1.4.1.3085.3.1.9.1
OBJECT IDENTIFIER    

csOrionSnmpGenTable 1.3.6.1.4.1.3085.3.1.9.1.1
This table controls the activation of the snmp agent on a particular Virtual Router. Note, only one agent instance can be enabled at a time.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionSnmpGenEntry

csOrionSnmpGenEntry 1.3.6.1.4.1.3085.3.1.9.1.1.1
Each entry represents a single Virtual Router.
OBJECT-TYPE    
  CsOrionSnmpGenEntry  

csOrionSnmpGenStatus 1.3.6.1.4.1.3085.3.1.9.1.1.1.1
This object is used to enable/disable the snmp server on this Virtual Router. If this object is disabled, the snmp server will not respond to any snmp requests and it won't send any traps.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOrionSnmpCommTable 1.3.6.1.4.1.3085.3.1.9.1.2
This table contains all the community strings recognized by the snmp server on this device.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionSnmpCommEntry

csOrionSnmpCommEntry 1.3.6.1.4.1.3085.3.1.9.1.2.1
Each entry represents a single community string.
OBJECT-TYPE    
  CsOrionSnmpCommEntry  

csOrionSnmpCommString 1.3.6.1.4.1.3085.3.1.9.1.2.1.1
This object identifies one community string recognized by the snmp server on this device.
OBJECT-TYPE    
  DisplayString SIZE(1..80)  

csOrionSnmpCommAddr 1.3.6.1.4.1.3085.3.1.9.1.2.1.2
This object identifies the Ip Address of a manager allowed to use this community string.
OBJECT-TYPE    
  IpAddress  

csOrionSnmpCommPriv 1.3.6.1.4.1.3085.3.1.9.1.2.1.3
This object indicates the privilege level of this community string. If the value of this object is readOnly(1), this snmp server will respond only to GET, GETNEXT, and GETBULK requests from snmp managers using this community string. If this value of this object is readWrite(2), this snmp server will respond to any requests from snmp managers using this community string.
OBJECT-TYPE    
  INTEGER readOnly(1), readWrite(2)  

csOrionSnmpCommRowStatus 1.3.6.1.4.1.3085.3.1.9.1.2.1.4
A row status type for the Snmp Community Table.
OBJECT-TYPE    
  RowStatus  

csOrionSnmpAgentErrorTable 1.3.6.1.4.1.3085.3.1.9.1.3
This table keeps track of the errors that happened when a NMS node tried to a SET operation. Since standard error codes returned by the SNMP response PDU was not comprehensive enough to indicate the actual problem, this table evolved. The NMS node has to keep the request-id field and the UDP port of the SET PDU that is being sent to the Orion SNMP agent. If the response-PDU corresponding to that SET returns an error, NMS node can browse this table with the saved request-id of the failed SET-PDU to get more information about the error.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionSnmpAgentErrorEntry

csOrionSnmpAgentErrorEntry 1.3.6.1.4.1.3085.3.1.9.1.3.1
Each entry represent an error associated with a set operation by a management station. The Orion SNMP agent keeps track of the last 25 instances of such errors. Older entries give way for new entries.
OBJECT-TYPE    
  CsOrionSnmpAgentErrorEntry  

csOrionSnmpAgentErrorNmsIpAddress 1.3.6.1.4.1.3085.3.1.9.1.3.1.1
IP address of the management station which made an unsuccessful SET operation.
OBJECT-TYPE    
  IpAddress  

csOrionSnmpAgentErrorNmsPort 1.3.6.1.4.1.3085.3.1.9.1.3.1.2
The UDP port of the SNMP SET request which resulted in an error.
OBJECT-TYPE    
  Integer32  

csOrionSnmpAgentErrorNmsRequestId 1.3.6.1.4.1.3085.3.1.9.1.3.1.3
The requst-id field of the SNMP SET request which resulted in an error.
OBJECT-TYPE    
  Integer32  

csOrionSnmpAgentErrorCode 1.3.6.1.4.1.3085.3.1.9.1.3.1.4
The error code set when the SNMP SET request resulted in an error.
OBJECT-TYPE    
  Integer32  

csOrionSnmpAgentErrorMsg 1.3.6.1.4.1.3085.3.1.9.1.3.1.5
Error message corresponding to the SET operation.
OBJECT-TYPE    
  DisplayString SIZE(1..128)  

csOrionTrapInfo 1.3.6.1.4.1.3085.3.1.9.2
OBJECT IDENTIFIER    

csOrionSnmpTrapTable 1.3.6.1.4.1.3085.3.1.9.2.1
This table controls the generation of traps by this Virtual Router.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionSnmpTrapEntry

csOrionSnmpTrapEntry 1.3.6.1.4.1.3085.3.1.9.2.1.1
Each entry represents a single Virtual Router.
OBJECT-TYPE    
  CsOrionSnmpTrapEntry  

csOrionSnmpTrapStatus 1.3.6.1.4.1.3085.3.1.9.2.1.1.1
This object is used to control the trap function for the snmp server on this device. If the value of this object is enable(1), the snmp server will send traps. If the value is disable(2), the snmp server will not send traps.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOrionTrapReceiverTable 1.3.6.1.4.1.3085.3.1.9.2.2
The trap receiver table (0 to 25 entries). This table lists the addresses of stations that should receive trap messages from this entity when an exception condition occurs.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionTrapReceiverEntry

csOrionTrapReceiverEntry 1.3.6.1.4.1.3085.3.1.9.2.2.1
A trap receiver table entry.
OBJECT-TYPE    
  CsOrionTrapReceiverEntry  

csOrionTrapReceiverComm 1.3.6.1.4.1.3085.3.1.9.2.2.1.1
Community string used for trap messages to this trap receiver.
OBJECT-TYPE    
  DisplayString SIZE(1..20)  

csOrionTrapReceiverAddr 1.3.6.1.4.1.3085.3.1.9.2.2.1.2
IP address for trap receiver.
OBJECT-TYPE    
  IpAddress  

csOrionTrapReceiverRowStatus 1.3.6.1.4.1.3085.3.1.9.2.2.1.3
A row status type for the Trap Receiver Table. This object is used to add or remove entries from this table.
OBJECT-TYPE    
  RowStatus  

csOrionTrapReceiverPort 1.3.6.1.4.1.3085.3.1.9.2.2.1.4
UDP port number for trap receiver. By default, all traps are sent to Port 162.
OBJECT-TYPE    
  Integer32  

csOrionTrapReceiverTrapType 1.3.6.1.4.1.3085.3.1.9.2.2.1.5
The trap type, which the Receiver wish to receive from this managed entity. By default, v2 inform request type is used to notify traps.
OBJECT-TYPE    
  INTEGER v1Trap(1), v2Inform(2), v1TrapAndv2Inform(3)  

csOrionAcctInfo 1.3.6.1.4.1.3085.3.1.10
OBJECT IDENTIFIER    

csOrionStaticConn 1.3.6.1.4.1.3085.3.1.10.1
OBJECT IDENTIFIER    

csOrionVpnAcctTable 1.3.6.1.4.1.3085.3.1.10.1.1
This table contains composite stats for each of the VPNs in this Orion.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionVpnAcctEntry

csOrionVpnAcctEntry 1.3.6.1.4.1.3085.3.1.10.1.1.1
Each entry contains composite stats for a single VPN.
OBJECT-TYPE    
  CsOrionVpnAcctEntry  

csOrionVpnAcctCompStats 1.3.6.1.4.1.3085.3.1.10.1.1.1.1
Composite stats for this VPN
OBJECT-TYPE    
  OCTET STRING SIZE(0..1000)  

csOrionVrAcctTable 1.3.6.1.4.1.3085.3.1.10.1.2
This table contains composite stats for each of the VRs in this Orion.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionVrAcctEntry

csOrionVrAcctEntry 1.3.6.1.4.1.3085.3.1.10.1.2.1
Each entry contains composite stats for a single VPN.
OBJECT-TYPE    
  CsOrionVrAcctEntry  

csOrionVrAcctCompStats 1.3.6.1.4.1.3085.3.1.10.1.2.1.1
Composite stats for this VPN
OBJECT-TYPE    
  OCTET STRING SIZE(0..1000)  

csOrionDynamicConn 1.3.6.1.4.1.3085.3.1.10.2
OBJECT IDENTIFIER    

csOrionRadiusAcctFlush 1.3.6.1.4.1.3085.3.1.10.2.1
This object is used to flush the contents of the csOrionRadiusAcctTable. To flush the table, set the value of this object to 1.
OBJECT-TYPE    
  INTEGER flush(1)  

csOrionRadiusAcctTable 1.3.6.1.4.1.3085.3.1.10.2.2
This table contains composite stats for each of the VRs in this Orion.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionRadiusAcctEntry

csOrionRadiusAcctEntry 1.3.6.1.4.1.3085.3.1.10.2.2.3
Each entry contains composite stats for a single VPN.
OBJECT-TYPE    
  CsOrionRadiusAcctEntry  

csOrionRadiusAcctIndex 1.3.6.1.4.1.3085.3.1.10.2.2.3.1
The index of this radius accounting entry. The values will increase monotonically, even after the entries have been flushed.
OBJECT-TYPE    
  Integer32  

csOrionRadiusAcctTimestamp 1.3.6.1.4.1.3085.3.1.10.2.2.3.2
The value of sysUpTime when this entry was created.
OBJECT-TYPE    
  TimeTicks  

csOrionRadiusAcctVpnId 1.3.6.1.4.1.3085.3.1.10.2.2.3.3
The Id of the VPN that originated this radius accounting entry.
OBJECT-TYPE    
  Integer32  

csOrionRadiusAcctVrId 1.3.6.1.4.1.3085.3.1.10.2.2.3.4
The Id of the VR that originated this radius accounting entry.
OBJECT-TYPE    
  IpAddress  

csOrionRadiusAcctInfo 1.3.6.1.4.1.3085.3.1.10.2.2.3.5
Information describing the creation or termination of a dynamic connection to a virtual router. The information is presented in standard radius accounting format.
OBJECT-TYPE    
  OCTET STRING SIZE(0..1000)  

csTelnetSvrInfo 1.3.6.1.4.1.3085.3.1.11
OBJECT IDENTIFIER    

csTelnetSvrConfTable 1.3.6.1.4.1.3085.3.1.11.1
A table of telnet server configuration parameters.
OBJECT-TYPE    
  SEQUENCE OF  
    CsTelnetSvrConfEntry

csTelnetSvrConfEntry 1.3.6.1.4.1.3085.3.1.11.1.1
Each entry contains a set of configuration paramters for telnet server in a VR. Note, that only a single instance of telnet server is enabledat a time.
OBJECT-TYPE    
  CsTelnetSvrConfEntry  

csTelnetSvrConfAdminStatus 1.3.6.1.4.1.3085.3.1.11.1.1.1
Enable/Disable the use of telnet server.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csTelnetSvrConfTimeout 1.3.6.1.4.1.3085.3.1.11.1.1.2
A user configurable telnet timeout value in minutes.
OBJECT-TYPE    
  Integer32 0..1440  

csTelnetSvrConfNumOfSessions 1.3.6.1.4.1.3085.3.1.11.1.1.3
User configurable number of simultaneous client sessions supported.
OBJECT-TYPE    
  Integer32 1..8  

csTelnetConnTable 1.3.6.1.4.1.3085.3.1.11.2
Table lists all the currently active telnet connection.
OBJECT-TYPE    
  SEQUENCE OF  
    CsTelnetConnEntry

csTelnetConnEntry 1.3.6.1.4.1.3085.3.1.11.2.1
Each entry lists one currently active telnet connection.
OBJECT-TYPE    
  CsTelnetConnEntry  

csTelnetConnId 1.3.6.1.4.1.3085.3.1.11.2.1.1
Connection Id of this particular telnet session.
OBJECT-TYPE    
  Integer32 1..256  

csTelnetConnIpAddr 1.3.6.1.4.1.3085.3.1.11.2.1.2
The remote peer's ip address of this telnet session.
OBJECT-TYPE    
  IpAddress  

csTelnetConnPort 1.3.6.1.4.1.3085.3.1.11.2.1.3
The remote peer's port number of this telnet session.
OBJECT-TYPE    
  Integer32 0..65535  

csTelnetConnRowStatus 1.3.6.1.4.1.3085.3.1.11.2.1.4
The admin status type for this entry in the connection table.
OBJECT-TYPE    
  RowStatus  

csOrionSyslogd 1.3.6.1.4.1.3085.3.1.12
OBJECT IDENTIFIER    

csOrionSyslogdTable 1.3.6.1.4.1.3085.3.1.12.1
This table controls the activation of the syslogd client on a particular Virtual Router. Note, only one client can be enabled at a time.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionSyslogdEntry

csOrionSyslogdEntry 1.3.6.1.4.1.3085.3.1.12.1.1
Each entry represents a single Virtual Router.
OBJECT-TYPE    
  CsOrionSyslogdEntry  

csOrionSyslogdStatus 1.3.6.1.4.1.3085.3.1.12.1.1.1
This object is used to enable/disable the syslogd client on this Virtual Router. If this object is disabled, the syslogd client will not forward any ev_log messages to a syslogd server.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

csOrionSyslogdReceiverAddr 1.3.6.1.4.1.3085.3.1.12.1.1.2
IP address for syslogd server.
OBJECT-TYPE    
  IpAddress  

csOrionSyslogdFacility1 1.3.6.1.4.1.3085.3.1.12.1.1.3
Mapping to Facility from Area 1
OBJECT-TYPE    
  INTEGER 1..24  

csOrionSyslogdFacility2 1.3.6.1.4.1.3085.3.1.12.1.1.4
Mapping to Facility from Area 2
OBJECT-TYPE    
  INTEGER 1..24  

csOrionSyslogdFacility3 1.3.6.1.4.1.3085.3.1.12.1.1.5
Mapping to Facility from Area 3
OBJECT-TYPE    
  INTEGER 1..24  

csOrionSyslogdFacility4 1.3.6.1.4.1.3085.3.1.12.1.1.6
Mapping to Facility from Area 4
OBJECT-TYPE    
  INTEGER 1..24  

csOrionSyslogdFacility5 1.3.6.1.4.1.3085.3.1.12.1.1.7
Mapping to Facility from Area 5
OBJECT-TYPE    
  INTEGER 1..24  

csOrionSyslogdFacility6 1.3.6.1.4.1.3085.3.1.12.1.1.8
Mapping to Facility from Area 6
OBJECT-TYPE    
  INTEGER 1..24  

csOrionSyslogdFacility7 1.3.6.1.4.1.3085.3.1.12.1.1.9
Mapping to Facility from Area 7
OBJECT-TYPE    
  INTEGER 1..24  

csOrionSyslogdFacility8 1.3.6.1.4.1.3085.3.1.12.1.1.10
Mapping to Facility from Area 8
OBJECT-TYPE    
  INTEGER 1..24  

csOrionSyslogdLevel1 1.3.6.1.4.1.3085.3.1.12.1.1.11
Mapping to syslogd Level from evlog level 1
OBJECT-TYPE    
  INTEGER 1..7  

csOrionSyslogdLevel2 1.3.6.1.4.1.3085.3.1.12.1.1.12
Mapping to syslogd Level from evlog level 2
OBJECT-TYPE    
  INTEGER 1..7  

csOrionSyslogdLevel3 1.3.6.1.4.1.3085.3.1.12.1.1.13
Mapping to syslogd Level from evlog level 3
OBJECT-TYPE    
  INTEGER 1..7  

csOrionSyslogdLevel4 1.3.6.1.4.1.3085.3.1.12.1.1.14
Mapping to syslogd Level from evlog level 4
OBJECT-TYPE    
  INTEGER 1..7  

csOrionSyslogdLevel5 1.3.6.1.4.1.3085.3.1.12.1.1.15
Mapping to syslogd Level from evlog level 5
OBJECT-TYPE    
  INTEGER 1..7  

csOrionSyslogdFacility9 1.3.6.1.4.1.3085.3.1.12.1.1.16
Mapping to Facility from Area 9
OBJECT-TYPE    
  INTEGER 1..24  

csOrionSyslogdFacility10 1.3.6.1.4.1.3085.3.1.12.1.1.17
Mapping to Facility from Area 10
OBJECT-TYPE    
  INTEGER 1..24  

csOrionSyslogdFacility11 1.3.6.1.4.1.3085.3.1.12.1.1.18
Mapping to Facility from Area 11
OBJECT-TYPE    
  INTEGER 1..24  

csOrionSyslogdFacility12 1.3.6.1.4.1.3085.3.1.12.1.1.19
Mapping to Facility from Area 12
OBJECT-TYPE    
  INTEGER 1..24  

csOrionHWNotifyInfo 1.3.6.1.4.1.3085.3.1.13
OBJECT IDENTIFIER    

csOrionFanEvent 1.3.6.1.4.1.3085.3.1.13.1
A fan event.
OBJECT-TYPE    
  INTEGER speedRisingAboveLowerCriticalThreshold(1), speedFallingBelowLowerCriticalThreshold(2), speedRisingAboveUpperCriticalThreshold(3), speedFallingBelowUpperCriticalThreshold(4)  

csOrionTemperatureEvent 1.3.6.1.4.1.3085.3.1.13.2
A fan event. Note that the first four event types apply to analog temperature sensors (for example, those used to measure inlet and outlet air flow temperature), and the last two apply to digital temperature sensors (for example, those in the power supplies).
OBJECT-TYPE    
  INTEGER tempRisingAboveUpperCriticalThreshold(1), tempFallingBelowUpperCriticalThreshold(2), tempRisingAboveUpperNonRecoverableThreshold(3), tempFallingBelowUpperNonRecoverableThreshold(4), tempExceedsMaxValue(5), tempEnteringNormalRange(6)  

csOrionPowerSupplyEvent 1.3.6.1.4.1.3085.3.1.13.3
A power supply event.
OBJECT-TYPE    
  INTEGER supplyModuleInserted(1), supplyModuleRemoved(2), inputVoltageRisingAboveLowerCriticalThreshold(3), inputVoltageFallingBelowLowerCriticalThreshold(4), outputVoltageRisingAboveLowerCriticalThreshold(5), outputVoltageFallingBelowLowerCriticalThreshold(6), outputCurrentRisingAboveUpperCriticalThreshold(7), outputCurrentFallingBelowUpperCriticalThreshold(8), auxVoltageRisingAboveLowerCriticalThreshold(9), auxVoltageFallingBelowLowerCriticalThreshold(10), temperatureExceedsMaxValue(11), temperatureEnteringNormalRange(12), currentShareRisingAboveLowerCriticalThreshold(13), currentShareFallingBelowLowerCriticalThreshold(14)  

csOrionFanSpeedThreshold 1.3.6.1.4.1.3085.3.1.13.4
The fan speed threshold (in revolutions per second).
OBJECT-TYPE    
  INTEGER 0..255  

csOrionTemperatureSensorIndex 1.3.6.1.4.1.3085.3.1.13.5
Identifies a particular temperature sensor.
OBJECT-TYPE    
  INTEGER 1..4  

csOrionTemperature 1.3.6.1.4.1.3085.3.1.13.6
The temperature reported by a temperature sensor.
OBJECT-TYPE    
  INTEGER 0..255  

csOrionTemperatureThreshold 1.3.6.1.4.1.3085.3.1.13.7
The temperature threshold (in degress celsius).
OBJECT-TYPE    
  INTEGER 0..255  

csOrionPacketRingPrimToProtCurrentEndpointSlot 1.3.6.1.4.1.3085.3.1.13.8
Current slot number of the primary-to-protection endpoint.
OBJECT-TYPE    
  Integer32 1..26  

csOrionPacketRingPrimToProtPreviousEndpointSlot 1.3.6.1.4.1.3085.3.1.13.9
Previous slot number of the primary-to-protection endpoint.
OBJECT-TYPE    
  Integer32 1..26  

csOrionPacketRingProtToPrimCurrentEndpointSlot 1.3.6.1.4.1.3085.3.1.13.10
Current slot number of the protection-to-primary endpoint.
OBJECT-TYPE    
  Integer32 1..26  

csOrionPacketRingProtToPrimPreviousEndpointSlot 1.3.6.1.4.1.3085.3.1.13.11
Previous slot number of the protection-to-primary endpoint.
OBJECT-TYPE    
  Integer32 1..26  

csOrionTempAirFlowCard 1.3.6.1.4.1.3085.3.1.13.12
The temperature/airflow sense card for which we are resporting an event. Note there is only one temperature/airflow sense card on 3500 chassis.
OBJECT-TYPE    
  INTEGER front(1), rear(2)  

csOrionI2CDeviceId 1.3.6.1.4.1.3085.3.1.13.13
An I2C device.
OBJECT-TYPE    
  INTEGER statusPanel(1), fanTray3500(2), frontFanTray9500(3), rearFanTray9500(4), tempAirFlowCard3500(5), frontTempAirFlowCard9500(6), rearTempAirFlowCard9500(7), powerSupplyMonitor(8)  

csOrionI2CDevicePresent 1.3.6.1.4.1.3085.3.1.13.14
Indicates whether a given I2C device is present or not.
OBJECT-TYPE    
  INTEGER devicePresent(1), deviceNotPresent(2)  

csOrionPowerSupplyMonitorEvent 1.3.6.1.4.1.3085.3.1.13.15
A power supply monitor event.
OBJECT-TYPE    
  INTEGER redundancyRegained(1), redundancyLost(2), auxVoltageRisingAboveLowerCriticalThreshold(3), auxVoltageFallingBelowLowerCriticalThreshold(4), outputVoltageRisingAboveLowerCriticalThreshold(5), outputVoltageFallingBelowLowerCriticalThreshold(6)  

csOrionTrapPowerSupplyIndex 1.3.6.1.4.1.3085.3.1.13.16
An index for the power supply to be used in power supply trap.
OBJECT-TYPE    
  Integer32 1..4  

cbrFileType 1.3.6.1.4.1.3085.3.1.13.17
The kind of file that is being copied from master to standby control blade: bootcfg(1) - boot configuration file config(2) - configuration file password(3) - password file
OBJECT-TYPE    
  INTEGER bootcfg(1), config(2), password(3)  

cbrFileName 1.3.6.1.4.1.3085.3.1.13.18
Name of the file that is being copied from master to standby control blade.
OBJECT-TYPE    
  DisplayString  

cbrFileErrorType 1.3.6.1.4.1.3085.3.1.13.19
Type of error that occurred during a file copy operation from master to standby control blade: cantOpenConfig(-6) - unable to open/create config file on standby control blade cantSaveConfig(-5) - unable to save config file on standby control blade cantChangeDirConfig(-4) - unable to change directory when updating config file on standby control blade cantWritePassword(-3) - unable to write into the password file on a standby control blade cantOpenPassword(-2) - unable to open/create password file on standby control blade cantChangeDirPassword(-1) - unable to change directory when updating password file on standby control blade savedBootcfg(1) - boot config file is saved successfully on standby control blade savedConfig(2) - configuration file is saved successfully on standby control blade savedPassword(3) - password file is saved successfully on standby control blade.
OBJECT-TYPE    
  INTEGER cantOpenConfig(-6), cantSaveConfig(-5), cantChangeDirConfig(-4), cantWritePassword(-3), cantOpenPassword(-2), cantChangeDirPassword(-1), savedBootcfg(1), savedConfig(2), savedPassword(3)  

cbrFileErrorCode 1.3.6.1.4.1.3085.3.1.13.20
pHILE+ error code associated with the file copy operation from master to standby control blade. Please consult the pSOS Manual for the possible values and the meanings of the error code.
OBJECT-TYPE    
  Integer32  

csOrionBgpMaxPfxLimitEvent 1.3.6.1.4.1.3085.3.1.13.21
Indicates the following events: maximum prefix limit reached exceeds maximum prefix exceeds maximum prefix limit - idling neighbor exceeds maximum prefix limit - discarding additional routes maximum prefix limit threshold reached.
OBJECT-TYPE    
  INTEGER maxPrefixLimitReached(1), exceedsMaxPrefix(2), exceedsMaxPrefixLimit(3), exceedsMaxPrefixLimitDiscardRoutes(4), maxPrefixLimitThresholdReached(5)  

csOrionStatusPanelInfo 1.3.6.1.4.1.3085.3.1.14
OBJECT IDENTIFIER    

csOrionStatusPanelPortTable 1.3.6.1.4.1.3085.3.1.14.1
A table containing information about the Status Panel ports.
OBJECT-TYPE    
  SEQUENCE OF  
    CsOrionStatusPanelPortEntry

csOrionStatusPanelPortEntry 1.3.6.1.4.1.3085.3.1.14.1.1
An entry containing management information applicable to a particular Status Panel port.
OBJECT-TYPE    
  CsOrionStatusPanelPortEntry  

csOrionStatusPanelPortIndex 1.3.6.1.4.1.3085.3.1.14.1.1.1
An index for a Status Panel port.
OBJECT-TYPE    
  Integer32 1..2  

csOrionStatusPanelPortBaudRate 1.3.6.1.4.1.3085.3.1.14.1.1.2
The baud rate of a Status Panel port.
OBJECT-TYPE    
  SPPBaudRate  

csOrionStatusPanelPortLoopback 1.3.6.1.4.1.3085.3.1.14.1.1.3
The loopback state of a Status Panel port.
OBJECT-TYPE    
  SPPLoopbackStatus  

csOrionStatusPanelPortModemStatus 1.3.6.1.4.1.3085.3.1.14.1.1.4
Whether or not a modem is connect to this Status Panel port.
OBJECT-TYPE    
  SPPModemStatus  

csOrionStatusPanelPortRedundantStatus 1.3.6.1.4.1.3085.3.1.14.1.1.5
???? Ask Bev ????.
OBJECT-TYPE    
  SPPRedundantStatus  

Defined Objects

LongDisplayString  
Use this instead of DisplayString for ASCII string that is longer than 255.
TEXTUAL-CONVENTION    
  OCTET STRING SIZE(0..1024)  

OperStatus  
Available operational states for the object (e.g. VPN, Virtual Router, Virtual Interface, etc.). This is used to provide additional granularity beyond that provided by RowStatus.
TEXTUAL-CONVENTION    
  INTEGER operationallyDown(1), initializing(2), operationallyUp(3), faultRecovery(4), testing(5), unknown(6)  

OperState  
Type used in enabling and disabling a row.
TEXTUAL-CONVENTION    
  INTEGER off(1), on(2)  

PerfCurrentCount  
A counter associated with a performance measurement in a current 15 minute measurement interval. The value of this counter starts from zero and is increased when associated events occur, until the end of the 15 minute interval. At that time the value of the counter is stored in the first 15 minute history interval, and the CurrentCount is restarted at zero. In the case where the agent has no valid data available for the current interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation).
TEXTUAL-CONVENTION    
  Gauge32  

PerfIntervalCount  
A counter associated with a performance measurement in a previous 15 minute measurement interval. In the case where the agent has no valid data available for a particular interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation). In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 15 minute interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1 - the value of IntervalCount(1) becomes that of CurrentCount - the TotalCount, if supported, is adjusted.
TEXTUAL-CONVENTION    
  Gauge32  

PerfTotalCount  
A counter associated with a performance measurements aggregating the previous valid 15 minute measurement intervals. (Intervals for which no valid data was available are not counted)
TEXTUAL-CONVENTION    
  Gauge32  

OrionIfIndex  
ifIndex for the interface table of the mib-2 is redefined here. The 32-bit integer is organized as below to easily locate an interface in an Orion box. +---------+----------+-------------+-----------------+----------------------+ |Reserved | | | | | |(always0)| slot # |port # | channel # | subif # | |1-bit | 5-bits |6-bits | 8-bits | 12-bits | +---------+----------+-------------+-----------------+----------------------+ In the case of channelized and un-channelized DS3 blades, subif #4095, refers to the PPP/CiscoHDLC interfaces encapsulted on a channel/port. If the encpsulation is Frame Relay, subif 16-4094 refers to Dlcis' an the subid #4095 refers to the Dlcmi on a channel. Whereever one of those components of ifIndex(slot/port/chan/subif) doesn't make sense, it should be Zero. For example, in the case of an ethernet blade, only the slot and port are the valid fields. Other will be zero. So, the interfeaces in an Orion box are sorted in their order of presence with respect to the slot,port,channel and subif compoinents.
TEXTUAL-CONVENTION    
  Integer32  

AtmVcIdentifier  
The VCI value for a VCL. The maximum VCI value cannot exceed the value allowable by atmInterfaceMaxVciBits defined in ATM-MIB.
TEXTUAL-CONVENTION    
  INTEGER 0..65535  

AtmVpIdentifier  
The VPI value for a VPL or VCL. The value VPI=0 is only allowed for a VCL. For ATM UNIs supporting VPCs the VPI value ranges from 0 to 255. The VPI value 0 is supported for ATM UNIs conforming to the ATM Forum UNI 4.0 Annex 8 (Virtual UNIs) specification. For ATM UNIs supporting VCCs the VPI value ranges from 0 to 255. For ATM NNIs the VPI value ranges from 0 to 4095. The maximum VPI value cannot exceed the value allowable by atmInterfaceMaxVpiBits defined in ATM-MIB.
TEXTUAL-CONVENTION    
  INTEGER 0..4095  

AtmServiceCategory  
The service category for a connection.
TEXTUAL-CONVENTION    
  INTEGER other(1), cbr(2), rtVbr(3), nrtVbr(4), abr(5), ubr(6)  

SPPBaudRate  
The baud rate of a Status Panel port.
TEXTUAL-CONVENTION    
  INTEGER baud50(1), baud75(2), baud110(3), baud134Dot5(4), baud150(5), baud300(6), baud600(7), baud1200(8), baud1800(9), baud2000(10), baud2400(11), baud3600(12), baud3800(13), baud7200(14), baud9600(15), baud19200(16), baud38400(17), baud56000(18), baud128000(19)  

SPPLoopbackStatus  
The loopback status of a Status Panel port.
TEXTUAL-CONVENTION    
  INTEGER noLoop(1), ccmLoop(2), spLoop(3)  

SPPModemStatus  
Indicates whether a modem is connected to a Service Panel port.
TEXTUAL-CONVENTION    
  INTEGER modemConnected(1), modemNotConnected(2)  

SPPRedundantStatus  
???? Ask Bev ????
TEXTUAL-CONVENTION    
  INTEGER master(1), standby(2)  

EvLogLevel  
This specifies the level of detail for the event log.
TEXTUAL-CONVENTION    
  INTEGER none(0), critical(100), major(200), minor(300), informational(400), debug(500)  

EvLogArea  
This is a bitmap where each bit represents the area that the event log belongs to. area bit ------------------------------------------------------ trap 0 emergency 1 system 2 authentication 3 application 4 protocol 5 ipsec/ike 6 link 7 configuration 8
TEXTUAL-CONVENTION    
  Integer32  

MplsLabel  
Represents an MPLS label. Note that the contents of a label field are interpreted in an interface-type specific fashion. For example, the label carried in the MPLS shim header is 20 bits wide and the top 12 bits must be zero. The frame relay label can be either 10, 17 or 23 bits wide depending on the size of the DLCI field size and the top 22, 15, or 9 bits must be zero, respectively. For an ATM interface, the lowermost 16 bits are interpreted as the VCI, the next 8 bits as the VPI and the remaining bits must be zero. Also note the permissible label values are also a function of the interface type. For example, the value 3 has special semantics in the control plane for an MPLS shim header label and is not a valid label value in the datapath.
TEXTUAL-CONVENTION    
  Integer32  

MplsLsrIdentifier  
The Label Switch Router (LSR) identifier is the first 4 bytes or the Router Id component of the Label Distribution Protocol (LDP) identifier.
TEXTUAL-CONVENTION    
  OCTET STRING SIZE(4)  

MplsLdpIdentifier  
The LDP identifier is a six octet quantity which is used to identify an Label Switch Router (LSR) label space. The first four octets encode an IP address assigned to the LSR, and the last two octets identify a specific label space within the LSR.
TEXTUAL-CONVENTION    
  OCTET STRING SIZE(6)  

MplsLdpLabelTypes  
The Layer 2 label types which are defined for MPLS LDP are generic(1), atm(2), or frameRelay(3).
TEXTUAL-CONVENTION    
  INTEGER generic(1), atm(2), frameRelay(3)  

MplsLdpGenAddr  
The value of an network layer or data link layer address.
TEXTUAL-CONVENTION    
  OCTET STRING SIZE(0..64)  

MplsAtmVcIdentifier  
The VCI value for a VCL. The maximum VCI value cannot exceed the value allowable by atmInterfaceMaxVciBits defined in ATM-MIB. The minimum value is 32, values 0 to 31 are reserved for other uses by the ITU and ATM Forum. 32 is typically the default value for the Control VC.
TEXTUAL-CONVENTION    
  Integer32 32..65535  

InterfaceIndexOrZero  
Represents an interface index
TEXTUAL-CONVENTION    
  Integer32  

PwVcIndex  
Virtual Circuit Index. Locally unique index for indexing one of several MIB tables associated with a particular VC.
TEXTUAL-CONVENTION    
  Unsigned32  

PwVcInstance  
Virtual Circuit Instance. Use in conjunction with PwVcIndex when it is required to have more than one instance of a particular VC. The primary application for instances is APS where there are primary and backup VCs.
TEXTUAL-CONVENTION    
  Unsigned32  

PwVcID  
Virtual Circuit Identifier. Uniquely identifies a VC locally. Also uniquely identifies a VC at its end points.
TEXTUAL-CONVENTION    
  Unsigned32  

PwGroupID  
An administrative identification mechanism for grouping a set of service-specific pseudo-wire services. May only have local significance
TEXTUAL-CONVENTION    
  Unsigned32  

SnmpAdminString  
An octet string containing administrative information, preferably in human-readable form. To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 transformation format described in [RFC2279]. Since additional code points are added by amendments to the 10646 standard from time to time, implementations must be prepared to encounter any code point from 0x00000000 to 0x7fffffff. Byte sequences that do not correspond to the valid UTF-8 encoding of a code point or are outside this range are prohibited. The use of control codes should be avoided. When it is necessary to represent a newline, the control code sequence CR LF should be used. The use of leading or trailing white space should be avoided. For code points not directly supported by user interface hardware or software, an alternative means of entry and display, such as hexadecimal, may be provided. For information encoded in 7-bit US-ASCII, the UTF-8 encoding is identical to the US-ASCII encoding. UTF-8 may require multiple bytes to represent a single character / code point; thus the length of this object in octets may be different from the number of characters encoded. Similarly, size constraints refer to the number of encoded octets, not the number of characters represented by an encoding. Note that when this TC is used for an object that is used or envisioned to be used as an index, then a SIZE restriction MUST be specified so that the number of sub-identifiers for any object instance does not exceed the limit of 128, as defined by [RFC1905]. Note that the size of an SnmpAdminString object is measured in octets, not characters.
TEXTUAL-CONVENTION    
  OCTET STRING SIZE(0..255)  

IKERadiusAcctUserType  
Specifies the type of information included in the RADIUS accounting-request user-name attribute sent by IKE.
TEXTUAL-CONVENTION    
  INTEGER xauthUserId(1), subjectAltName(2), distinguishedName(3), assignedIPAddress(4)  

CsOrionSystemBootEntry  
SEQUENCE    
  Integer32 as csOrionSystemBootIndex  
  DisplayString as csOrionSystemBootImageName1  
  DisplayString as csOrionSystemBootImageName2  
  DisplayString as csOrionSystemBootImageName3  
  DisplayString as csOrionSystemBootImageName4  
  DisplayString as csOrionSystemBootImageName5  
  DisplayString as csOrionSystemBootImageName6  
  Integer32 as csOrionSystemBootPort  
  IpAddress as csOrionSystemBootServerAddress  
  IpAddress as csOrionSystemBootLocalIpAddr  
  IpAddress as csOrionSystemBootLocalIpMask  
  IpAddress as csOrionSystemBootDefGw  
  DisplayString as csOrionSystemBootConfig  
  INTEGER as csOrionSystemBootSaveImage  
  DisplayString as csOrionSystemBootUserName  
  DisplayString as csOrionSystemBootUserPassword  
  IpAddress as csOrionSystemBootInternalNwAddr  
  Integer32 as csOrionSystemBootConcurrentDownloads  

CsOrionSystemLoginUserEntry  
SEQUENCE    
  DisplayString as csOrionSystemLoginUserName  
  DisplayString as csOrionSystemLoginUserDesc  
  DisplayString as csOrionSystemLoginUserPassword  
  RowStatus as csOrionSystemLoginUserRowStatus  
  OperStatus as csOrionSystemLoginUserOperStatus  

CsOrionSystemLoginRoleEntry  
SEQUENCE    
  DisplayString as csOrionSystemLoginRoleName  
  DisplayString as csOrionSystemLoginRoleDesc  
  OCTET STRING as csOrionSystemLoginRoleAccessRights  
  RowStatus as csOrionSystemLoginRoleRowStatus  

CsOrionSystemLoginDomainEntry  
SEQUENCE    
  DisplayString as csOrionSystemLoginDomainName  
  DisplayString as csOrionSystemLoginDomainDesc  
  LongDisplayString as csOrionSystemLoginDomainVRList  
  LongDisplayString as csOrionSystemLoginDomainInterfaceList  
  RowStatus as csOrionSystemLoginDomainRowStatus  

CsOrionSystemLoginPermEntry  
SEQUENCE    
  RowStatus as csOrionSystemLoginPermRowStatus  

CsOrionFileSysReqEntry  
SEQUENCE    
  Integer32 as csOrionFileSysReqIndex  
  INTEGER as csOrionFileSysReqType  
  DisplayString as csOrionFileSysReqSrcFile  
  DisplayString as csOrionFileSysReqDestFile  
  INTEGER as csOrionFileSysReqStatus  
  RowStatus as csOrionFileSysReqRowStatus  

CsOrionFileSysResultEntry  
SEQUENCE    
  Integer32 as csOrionFileSysResultIndex  
  DisplayString as csOrionFileSysResultFilename  
  Integer32 as csOrionFileSysResultFilesize  

CsEthEntry  
SEQUENCE    
  Integer32 as csEthSlotIndex  
  Integer32 as csEthModuleIndex  
  Integer32 as csEthPortIndex  
  INTEGER as csEthEncapType  
  INTEGER as csEthAutoneg  
  INTEGER as csEthDuplex  
  INTEGER as csEthSpeed  
  Integer32 as csEthLinkTestInterval  
  INTEGER as csEthAdminStatus  
  OperStatus as csEthOperStatus  
  INTEGER as csEthPppoeService  

CsEthSubIfEntry  
SEQUENCE    
  Integer32 as csEthSubIfChannelIndex  
  Integer32 as csEthSubIfIndex  
  Integer32 as csEthSubIfVlanId  
  Integer32 as csEthSubIfUserPriority  
  DisplayString as csEthSubIfVlanName  
  INTEGER as csEthSubIfAdmStatus  
  OperStatus as csEthSubIfOpStatus  
  RowStatus as csEthSubIfRowStatus  
  INTEGER as csEthSubifPppoeService  

CsDs3ConfigEntry  
SEQUENCE    
  Integer32 as csDs3ConfigSlotIndex  
  Integer32 as csDs3ConfigModuleIndex  
  Integer32 as csDs3ConfigPortIndex  
  Integer32 as csDs3ConfigCableLength  
  INTEGER as csDs3ConfigFraming  
  INTEGER as csDs3ConfigMdlPath  
  INTEGER as csDs3ConfigMdlIdleSig  
  INTEGER as csDs3ConfigMdlTestSig  
  DisplayString as csDs3ConfigMdlEic  
  DisplayString as csDs3ConfigMdlLic  
  DisplayString as csDs3ConfigMdlFic  
  DisplayString as csDs3ConfigMdlUnit  
  DisplayString as csDs3ConfigMdlPfi  
  DisplayString as csDs3ConfigMdlPort  
  DisplayString as csDs3ConfigMdlGenerator  
  Integer32 as csDs3ConfigTestT1Id  
  INTEGER as csDs3ConfigAdminStatus  
  OperStatus as csDs3ConfigOperStatus  
  INTEGER as csDs3ConfigClockSource  
  INTEGER as csDs3ConfigDeviceType  
  INTEGER as csDs3ConfigSendCode  
  INTEGER as csDs3ConfigLoopbackType  
  INTEGER as csDs3ConfigLoopbackStatus  
  INTEGER as csDs3ConfigLineStatus  
  INTEGER as csDs3ConfigTimeElapsed  
  INTEGER as csDs3ConfigValidInterval  
  INTEGER as csDs3ConfigInvalidInterval  
  INTEGER as csDs3ConfigLineCoding  
  INTEGER as csDs3ConfigNationalBit  

CsDs3Ds1ConfigEntry  
SEQUENCE    
  Integer32 as csDs3Ds1Id  
  INTEGER as csDs3Ds1Framing  
  INTEGER as csDs3Ds1YellowAlarmDetect  
  INTEGER as csDs3Ds1YellowAlarmGen  
  INTEGER as csDs3Ds1LineCode  
  INTEGER as csDs3Ds1InvertData  
  INTEGER as csDs3Ds1ClockSource  
  INTEGER as csDs3Ds1Fdl  
  OperStatus as csDs3Ds1OperStatus  
  INTEGER as csDs3Ds1SendCode  
  INTEGER as csDs3Ds1LoopbackType  
  INTEGER as csDs3Ds1LoopbackStatus  
  Integer32 as csDs3Ds1LineConfig  
  Integer32 as csDs3Ds1LineStatus  
  INTEGER as csDs3E1NatBits  
  INTEGER as csDs3E1IntBits  

CsChDs3Entry  
SEQUENCE    
  Integer32 as csChDs3SlotIndex  
  Integer32 as csChDs3ModuleIndex  
  Integer32 as csChDs3PortIndex  
  Integer32 as csChDs3ChNumber  
  Integer32 as csChDs3T1Number  
  DisplayString as csChDs3TimeSlots  
  INTEGER as csChDs3Speed  
  INTEGER as csChDs3Encap  
  RowStatus as csChDs3RowStatus  
  OperStatus as csChDs3OperStatus  

CsEthStatsEntry  
SEQUENCE    
  Counter64 as csEthStatsTxDeferPktsOk  
  Counter64 as csEthStatsTxColCounts  
  Counter64 as csEthStatsTxScolPktsOk  
  Counter64 as csEthStatsTxMulticCollisionPktsOK  
  Counter64 as csEthStatsTx16CollisionCounts  
  Counter64 as csEthStatsTxLateCollisionCounts  
  Counter64 as csEthStatsTx64Pkts  
  Counter64 as csEthStatsTx65To127Pkts  
  Counter64 as csEthStatsTx128To255Pkts  
  Counter64 as csEthStatsTx256To511Pkts  
  Counter64 as csEthStatsTx512To1023Pkts  
  Counter64 as csEthStatsTx1024To1518Pkts  
  Counter64 as csEthStatsTx1519Pkts  
  Counter64 as csEthStatsTxPausePktsOk  
  Counter64 as csEthStatsTxErrCounts  
  Counter64 as csEthStatsTxOctetsBad  
  Counter64 as csEthStatsRxRuntCounts  
  Counter64 as csEthStatsRxOvfCounts  
  Counter64 as csEthStatsRxShortPktsOk  
  Counter64 as csEthStatsRxNormCrcCounts  
  Counter64 as csEthStatsRxNormAliCounts  
  Counter64 as csEthStatsRxLongPktsCounts  
  Counter64 as csEthStatsRxLongCrcCounts  
  Counter64 as csEthStatsRx64Pkts  
  Counter64 as csEthStatsRx65To127Pkts  
  Counter64 as csEthStatsRx128To255Pkts  
  Counter64 as csEthStatsRx256To511Pkts  
  Counter64 as csEthStatsRx512To1023Pkts  
  Counter64 as csEthStatsRx1024To1518Pkts  
  Counter64 as csEthStatsRx1519Pkts  
  Counter64 as csEthStatsRxPausePktsOk  
  Counter64 as csEthStatsRxFalsCrcCounts  
  Counter64 as csEthStatsRxOctsBad  
  Counter64 as csEthStatsRxSysErrCounts  
  Counter64 as csEthStatsTx1024Pkts  
  Counter64 as csEthStatsRx1024Pkts  

CsDs3StatCurrentEntry  
SEQUENCE    
  PerfCurrentCount as csDs3StatCurrentPESs  
  PerfCurrentCount as csDs3StatCurrentPSESs  
  PerfCurrentCount as csDs3StatCurrentSEFSs  
  PerfCurrentCount as csDs3StatCurrentUASs  
  PerfCurrentCount as csDs3StatCurrentLCVs  
  PerfCurrentCount as csDs3StatCurrentPCVs  
  PerfCurrentCount as csDs3StatCurrentLESs  
  PerfCurrentCount as csDs3StatCurrentCCVs  
  PerfCurrentCount as csDs3StatCurrentCESs  
  PerfCurrentCount as csDs3StatCurrentCSESs  
  PerfCurrentCount as csDs3StatCurrentLSESs  

CsDs3StatIntervalEntry  
SEQUENCE    
  INTEGER as csDs3StatIntervalNumber  
  PerfIntervalCount as csDs3StatIntervalPESs  
  PerfIntervalCount as csDs3StatIntervalPSESs  
  PerfIntervalCount as csDs3StatIntervalSEFSs  
  PerfIntervalCount as csDs3StatIntervalUASs  
  PerfIntervalCount as csDs3StatIntervalLCVs  
  PerfIntervalCount as csDs3StatIntervalPCVs  
  PerfIntervalCount as csDs3StatIntervalLESs  
  PerfIntervalCount as csDs3StatIntervalCCVs  
  PerfIntervalCount as csDs3StatIntervalCESs  
  PerfIntervalCount as csDs3StatIntervalCSESs  
  PerfIntervalCount as csDs3StatIntervalLSESs  
  TruthValue as csDs3StatIntervalValidData  

CsDs3StatTotalEntry  
SEQUENCE    
  PerfTotalCount as csDs3StatTotalPESs  
  PerfTotalCount as csDs3StatTotalPSESs  
  PerfTotalCount as csDs3StatTotalSEFSs  
  PerfTotalCount as csDs3StatTotalUASs  
  PerfTotalCount as csDs3StatTotalLCVs  
  PerfTotalCount as csDs3StatTotalPCVs  
  PerfTotalCount as csDs3StatTotalLESs  
  PerfTotalCount as csDs3StatTotalCCVs  
  PerfTotalCount as csDs3StatTotalCESs  
  PerfTotalCount as csDs3StatTotalCSESs  
  PerfTotalCount as csDs3StatTotalLSESs  

CsDs3Ds1CurrentEntry  
SEQUENCE    
  PerfCurrentCount as csDs3Ds1CurrentESs  
  PerfCurrentCount as csDs3Ds1CurrentSESs  
  PerfCurrentCount as csDs3Ds1CurrentSEFSs  
  PerfCurrentCount as csDs3Ds1CurrentUASs  
  PerfCurrentCount as csDs3Ds1CurrentCSSs  
  PerfCurrentCount as csDs3Ds1CurrentPCVs  
  PerfCurrentCount as csDs3Ds1CurrentLESs  
  PerfCurrentCount as csDs3Ds1CurrentBESs  
  PerfCurrentCount as csDs3Ds1CurrentDMs  
  PerfCurrentCount as csDs3Ds1CurrentLCVs  

CsDs3Ds1IntervalEntry  
SEQUENCE    
  INTEGER as csDs3Ds1IntervalNumber  
  PerfIntervalCount as csDs3Ds1IntervalESs  
  PerfIntervalCount as csDs3Ds1IntervalSESs  
  PerfIntervalCount as csDs3Ds1IntervalSEFSs  
  PerfIntervalCount as csDs3Ds1IntervalUASs  
  PerfIntervalCount as csDs3Ds1IntervalCSSs  
  PerfIntervalCount as csDs3Ds1IntervalPCVs  
  PerfIntervalCount as csDs3Ds1IntervalLESs  
  PerfIntervalCount as csDs3Ds1IntervalBESs  
  PerfIntervalCount as csDs3Ds1IntervalDMs  
  PerfIntervalCount as csDs3Ds1IntervalLCVs  
  TruthValue as csDs3Ds1IntervalValidData  

CsDs3Ds1TotalEntry  
SEQUENCE    
  PerfTotalCount as csDs3Ds1TotalESs  
  PerfTotalCount as csDs3Ds1TotalSESs  
  PerfTotalCount as csDs3Ds1TotalSEFSs  
  PerfTotalCount as csDs3Ds1TotalUASs  
  PerfTotalCount as csDs3Ds1TotalCSSs  
  PerfTotalCount as csDs3Ds1TotalPCVs  
  PerfTotalCount as csDs3Ds1TotalLESs  
  PerfTotalCount as csDs3Ds1TotalBESs  
  PerfTotalCount as csDs3Ds1TotalDMs  
  PerfTotalCount as csDs3Ds1TotalLCVs  

CsUnchanDs3ConfigEntry  
SEQUENCE    
  Integer32 as csUnchanDs3ConfigSlotIndex  
  Integer32 as csUnchanDs3ConfigModuleIndex  
  Integer32 as csUnchanDs3ConfigPortIndex  
  Integer32 as csUnchanDs3ConfigCableLength  
  INTEGER as csUnchanDs3ConfigFraming  
  INTEGER as csUnchanDs3ConfigMdlPath  
  INTEGER as csUnchanDs3ConfigMdlIdleSig  
  INTEGER as csUnchanDs3ConfigMdlTestSig  
  DisplayString as csUnchanDs3ConfigMdlEic  
  DisplayString as csUnchanDs3ConfigMdlLic  
  DisplayString as csUnchanDs3ConfigMdlFic  
  DisplayString as csUnchanDs3ConfigMdlUnit  
  DisplayString as csUnchanDs3ConfigMdlPfi  
  DisplayString as csUnchanDs3ConfigMdlPort  
  DisplayString as csUnchanDs3ConfigMdlGenerator  
  INTEGER as csUnchanDs3ConfigAdminStatus  
  OperStatus as csUnchanDs3ConfigOperStatus  
  INTEGER as csUnchanDs3ConfigClockSource  
  INTEGER as csUnchanDs3ConfigEncap  
  INTEGER as csUnchanDs3ConfigSendCode  
  INTEGER as csUnchanDs3ConfigLoopbackType  
  INTEGER as csUnchanDs3ConfigLoopbackStatus  
  INTEGER as csUnchanDs3ConfigLineStatus  
  INTEGER as csUnchanDs3ConfigTimeElapsed  
  INTEGER as csUnchanDs3ConfigValidInterval  
  INTEGER as csUnchanDs3ConfigInvalidInterval  
  INTEGER as csUnchanDs3ConfigDeviceType  

CsOc3ConfigEntry  
SEQUENCE    
  Integer32 as csOc3SlotIndex  
  Integer32 as csOc3ModuleIndex  
  Integer32 as csOc3PortIndex  
  INTEGER as csOc3ClockSource  
  INTEGER as csOc3CrcType  
  INTEGER as csOc3SectionJ0  
  INTEGER as csOc3LineS1S0  
  INTEGER as csOc3PathC2  
  DisplayString as csOc3PathJ1  
  DisplayString as csOc3FarEndJ1  
  INTEGER as csOc3Scramble  
  INTEGER as csOc3NearEndPerfMonControl  
  INTEGER as csOc3FarEndPerfMonControl  
  INTEGER as csOc3ApsControl  
  INTEGER as csOc3ApsForce  
  INTEGER as csOc3ApsActivePort  
  INTEGER as csOc3AlarmControl  
  INTEGER as csOc3Loopback  
  INTEGER as csOc3AdminStatus  
  OperStatus as csOc3OperStatus  
  Integer32 as csOc3TimeElapsed  
  Integer32 as csOc3ValidIntervals  
  Integer32 as csOc3InvalidIntervals  
  INTEGER as csOc3PosEncapType  
  INTEGER as csOc3PosEmptyCellType  
  Integer32 as csOc3PosMaxPacketSize  
  OperStatus as csOc3PosOperStatus  
  INTEGER as csOc3MediumLineType  
  DisplayString as csOc3ReceivedPathJ1  
  INTEGER as csOcNSpeed  

CsOc3SectionCurrentEntry  
SEQUENCE    
  Integer32 as csOc3SectionCurrentStatus  
  PerfCurrentCount as csOc3SectionCurrentESs  
  PerfCurrentCount as csOc3SectionCurrentSESs  
  PerfCurrentCount as csOc3SectionCurrentSEFSs  
  PerfCurrentCount as csOc3SectionCurrentCVs  

CsOc3SectionIntervalEntry  
SEQUENCE    
  Integer32 as csOc3SectionIntervalNumber  
  PerfIntervalCount as csOc3SectionIntervalESs  
  PerfIntervalCount as csOc3SectionIntervalSESs  
  PerfIntervalCount as csOc3SectionIntervalSEFSs  
  PerfIntervalCount as csOc3SectionIntervalCVs  
  TruthValue as csOc3SectionIntervalValidData  

CsOc3SectionDayEntry  
SEQUENCE    
  PerfCurrentCount as csOc3SectionDayESs  
  PerfCurrentCount as csOc3SectionDaySESs  
  PerfCurrentCount as csOc3SectionDaySEFSs  
  PerfCurrentCount as csOc3SectionDayCVs  

CsOc3SectionPrevDayEntry  
SEQUENCE    
  PerfCurrentCount as csOc3SectionPrevDayESs  
  PerfCurrentCount as csOc3SectionPrevDaySESs  
  PerfCurrentCount as csOc3SectionPrevDaySEFSs  
  PerfCurrentCount as csOc3SectionPrevDayCVs  

CsOc3LineCurrentEntry  
SEQUENCE    
  Integer32 as csOc3LineCurrentStatus  
  PerfCurrentCount as csOc3LineCurrentESs  
  PerfCurrentCount as csOc3LineCurrentSESs  
  PerfCurrentCount as csOc3LineCurrentCVs  
  PerfCurrentCount as csOc3LineCurrentUASs  
  PerfCurrentCount as csOc3LineCurrentFCs  

CsOc3LineIntervalEntry  
SEQUENCE    
  Integer32 as csOc3LineIntervalNumber  
  PerfIntervalCount as csOc3LineIntervalESs  
  PerfIntervalCount as csOc3LineIntervalSESs  
  PerfIntervalCount as csOc3LineIntervalCVs  
  PerfIntervalCount as csOc3LineIntervalUASs  
  TruthValue as csOc3LineIntervalValidData  
  PerfIntervalCount as csOc3LineIntervalFCs  

CsOc3LineDayEntry  
SEQUENCE    
  PerfCurrentCount as csOc3LineDayESs  
  PerfCurrentCount as csOc3LineDaySESs  
  PerfCurrentCount as csOc3LineDayCVs  
  PerfCurrentCount as csOc3LineDayUASs  
  PerfCurrentCount as csOc3LineDayFCs  

CsOc3LinePrevDayEntry  
SEQUENCE    
  PerfCurrentCount as csOc3LinePrevDayESs  
  PerfCurrentCount as csOc3LinePrevDaySESs  
  PerfCurrentCount as csOc3LinePrevDayCVs  
  PerfCurrentCount as csOc3LinePrevDayUASs  
  PerfCurrentCount as csOc3LinePrevDayFCs  

CsOc3PathCurrentEntry  
SEQUENCE    
  INTEGER as csOc3PathCurrentWidth  
  Integer32 as csOc3PathCurrentStatus  
  PerfCurrentCount as csOc3PathCurrentESs  
  PerfCurrentCount as csOc3PathCurrentSESs  
  PerfCurrentCount as csOc3PathCurrentCVs  
  PerfCurrentCount as csOc3PathCurrentUASs  
  PerfCurrentCount as csOc3PathCurrentFCs  

CsOc3PathIntervalEntry  
SEQUENCE    
  Integer32 as csOc3PathIntervalNumber  
  PerfIntervalCount as csOc3PathIntervalESs  
  PerfIntervalCount as csOc3PathIntervalSESs  
  PerfIntervalCount as csOc3PathIntervalCVs  
  PerfIntervalCount as csOc3PathIntervalUASs  
  TruthValue as csOc3PathIntervalValidData  
  PerfIntervalCount as csOc3PathIntervalFCs  

CsOc3PathDayEntry  
SEQUENCE    
  PerfCurrentCount as csOc3PathDayESs  
  PerfCurrentCount as csOc3PathDaySESs  
  PerfCurrentCount as csOc3PathDayCVs  
  PerfCurrentCount as csOc3PathDayUASs  
  PerfCurrentCount as csOc3PathDayFCs  

CsOc3PathPrevDayEntry  
SEQUENCE    
  PerfCurrentCount as csOc3PathPrevDayESs  
  PerfCurrentCount as csOc3PathPrevDaySESs  
  PerfCurrentCount as csOc3PathPrevDayCVs  
  PerfCurrentCount as csOc3PathPrevDayUASs  
  PerfCurrentCount as csOc3PathPrevDayFCs  

CsOc3PosStatsEntry  
SEQUENCE    
  Counter64 as csOc3PosRcvBytes  
  Counter64 as csOc3PosRcvFrames  
  Counter64 as csOc3PosRcvAbortedFrames  
  Counter64 as csOc3PosRcvFrameFCSError  
  Counter64 as csOc3PosRcvFrameMinPacketError  
  Counter64 as csOc3PosRcvFrameMaxPacketError  
  Counter64 as csOc3PosSentBytes  
  Counter64 as csOc3PosSentFrames  
  Counter64 as csOc3PosSentFrameUserAborted  
  Counter64 as csOc3PosSentFrameUnderrunAborted  

CsOc3AtmCurrentStatsEntry  
SEQUENCE    
  Counter64 as csOc3AtmCurrentTransmittedCells  
  Counter64 as csOc3AtmCurrentRecievedCells  
  Counter64 as csOc3AtmCurrentIdleCells  
  Counter64 as csOc3AtmCurrentCorrectedHEC  
  Counter64 as csOc3AtmCurrentUnCorrectedHEC  

CsOc3AtmIntervalStatsEntry  
SEQUENCE    
  Integer32 as csOc3AtmIntervalNumber  
  Counter64 as csOc3AtmIntervalTransmittedCells  
  Counter64 as csOc3AtmIntervalRecievedCells  
  Counter64 as csOc3AtmIntervalIdleCells  
  Counter64 as csOc3AtmIntervalCorrectedHEC  
  Counter64 as csOc3AtmIntervalUnCorrectedHEC  
  TruthValue as csOc3AtmIntervalValidData  

DLCI  
The range of DLCI values. Note that this varies by interface configuration; normally, interfaces may use 0..1023, but may be configured to use ranges as large as 0..2^23.
TEXTUAL-CONVENTION    
  Integer32 0..8388607  

CsFrDlcmiEntry  
SEQUENCE    
  Integer32 as csFrDlcmiSlot  
  Integer32 as csFrDlcmiModule  
  Integer32 as csFrDlcmiPort  
  Integer32 as csFrDlcmiChannel  
  INTEGER as csFrDlcmiState  
  INTEGER as csFrDlcmiAddress  
  INTEGER as csFrDlcmiAddressLen  
  Integer32 as csFrDlcmiPollingInterval  
  Integer32 as csFrDlcmiFullEnquiryInterval  
  Integer32 as csFrDlcmiErrorThreshold  
  Integer32 as csFrDlcmiMonitoredEvents  
  DLCI as csFrDlcmiMaxSupportedVCs  
  INTEGER as csFrDlcmiMulticast  
  INTEGER as csFrDlcmiStatus  
  INTEGER as csFrDlcmiIfType  
  INTEGER as csFrDlcmiBECNFlowControl  
  INTEGER as csFrDlcmiInjectionManagement  
  DisplayString as csFrDlcmiName  
  DLCI as csFrDlcmiLmiDlci  
  Integer32 as csFrDlcmiDceN392  
  Integer32 as csFrDlcmiDceN393  
  Integer32 as csFrDlcmiDceT392  
  INTEGER as csFrDlcmiAsyncEnabled  

CsFrCircuitEntry  
SEQUENCE    
  Integer32 as csFrCircuitSubIf  
  DLCI as csFrCircuitDlci  
  INTEGER as csFrCircuitState  
  Counter32 as csFrCircuitReceivedFECNs  
  Counter32 as csFrCircuitReceivedBECNs  
  Counter32 as csFrCircuitSentFrames  
  Counter32 as csFrCircuitSentOctets  
  Counter32 as csFrCircuitReceivedFrames  
  Counter32 as csFrCircuitReceivedOctets  
  TimeStamp as csFrCircuitCreationTime  
  TimeStamp as csFrCircuitLastTimeChange  
  Integer32 as csFrCircuitCommittedBurst  
  Integer32 as csFrCircuitExcessBurst  
  Integer32 as csFrCircuitThroughput  
  INTEGER as csFrCircuitMulticast  
  INTEGER as csFrCircuitType  
  Counter32 as csFrCircuitDiscards  
  Counter32 as csFrCircuitReceivedDEs  
  Counter32 as csFrCircuitSentDEs  
  IpAddress as csFrCircuitRemoteIpAddress  
  RowStatus as csFrCircuitRowStatus  
  OperStatus as csFrCircuitOperStatus  
  INTEGER as csFrCircitFwdDlciType  
  OCTET STRING as csFrCircuitFwdLink  
  INTEGER as csFrCircuitRatePolice  
  INTEGER as csFrCircuitUpperProtocol  

CsFrErrEntry  
SEQUENCE    
  INTEGER as csFrErrType  
  OCTET STRING as csFrErrData  
  TimeStamp as csFrErrTime  
  Counter32 as csFrErrFaults  
  TimeStamp as csFrErrFaultTime  

CsFrDlcmiStatEntry  
SEQUENCE    
  Counter32 as csFrDlcmiStatStatusEnquiries  
  Counter32 as csFrDlcmiStatFullStatusEnquiries  
  Counter32 as csFrDlcmiStatStatusResponses  
  Counter32 as csFrDlcmiStatFullStatusResponses  
  Counter32 as csFrDlcmiStatAsyncUpdates  
  Counter32 as csFrDlcmiStatUnknownMessages  
  Counter32 as csFrDlcmiStatLostSequences  
  Counter32 as csFrDlcmiStatMissingResponses  
  Counter32 as csFrDlcmiStatLocalSequenceNumber  
  Counter32 as csFrDlcmiStatNetSequenceNumber  

CsAtmInterfaceConfEntry  
SEQUENCE    
  Integer32 as csAtmInterfaceConfSlotIndex  
  Integer32 as csAtmInterfaceConfModuleIndex  
  Integer32 as csAtmInterfaceConfPortIndex  
  Integer32 as csAtmInterfaceConfMaxVpcs  
  Integer32 as csAtmInterfaceConfMaxVccs  
  Integer32 as csAtmInterfaceConfVpcs  
  Integer32 as csAtmInterfaceConfVccs  
  Integer32 as csAtmInterfaceConfMaxActiveVpiBits  
  Integer32 as csAtmInterfaceConfCurrentMaxVpiBits  
  Integer32 as csAtmInterfaceConfMaxActiveVciBits  
  Integer32 as csAtmInterfaceConfCurrentMaxVciBits  
  AtmVpIdentifier as csAtmInterfaceConfIlmiVpi  
  AtmVcIdentifier as csAtmInterfaceConfIlmiVci  
  DisplayString as csAtmInterfaceConfMyIfName  
  IpAddress as csAtmInterfaceConfMyNeighbourIpAddress  
  DisplayString as csAtmInterfaceConfMyNeighbourIfName  
  INTEGER as csAtmInterfaceConfIlmiVersion  
  INTEGER as csAtmInterfaceConfUniType  
  INTEGER as csAtmInterfaceConfUniVersion  
  INTEGER as csAtmInterfaceConfAdminStatus  
  OperStatus as csAtmInterfaceConfOperStatus  
  INTEGER as csAtmInterfaceConfIlmiControl  
  INTEGER as csAtmInterfaceConfIlmiStatus  
  EvLogLevel as csAtmInterfaceConfEvLogLevel  
  EvLogArea as csAtmInterfaceConfEvLogArea  

CsAtmConnEntry  
SEQUENCE    
  Integer32 as csAtmConnChannelIndex  
  Integer32 as csAtmConnSubIfIndex  
  AtmVpIdentifier as csAtmConnVpi  
  AtmVcIdentifier as csAtmConnVci  
  AtmServiceCategory as csAtmConnType  
  INTEGER as csAtmConnPvcType  
  Integer32 as csAtmConnPCR  
  Integer32 as csAtmConnSCR  
  Integer32 as csAtmConnMBS  
  Integer32 as csAtmConnICR  
  Integer32 as csAtmConnMCR  
  INTEGER as csAtmConnOamLoopback  
  INTEGER as csAtmConnOamContinuity  
  Integer32 as csAtmConnAal5CpcsTransmitSduSize  
  Integer32 as csAtmConnAal5CpcsReceiveSduSize  
  INTEGER as csAtmConnEncapType  
  INTEGER as csAtmConnKind  
  INTEGER as csAtmConnAdminStatus  
  OperStatus as csAtmConnOperStatus  
  RowStatus as csAtmConnRowStatus  
  INTEGER as csAtmConnUpperProtocol  
  Integer32 as csAtmConnArpAgingTime  
  Integer32 as csAtmConnArpCacheSize  
  MacAddress as csAtmConnEthernetMacAddress  
  EvLogLevel as csAtmConnEvLogLevel  
  EvLogArea as csAtmConnEvLogArea  
  Integer32 as csAtmConnInArpAgingTime  
  INTEGER as csAtmConnInArpManageVc  
  INTEGER as csAtmConnInArpManageStatus  
  INTEGER as csAtmConnInArpAdminStatus  
  Integer32 as csAtmConnOamLoopbackRetryPvcUpCount  
  Integer32 as csAtmConnOamLoopbackRetryPvcUpRetryDelay  
  Integer32 as csAtmConnOamLoopbackRetryPvcUpAge  
  Integer32 as csAtmConnOamLoopbackRetryPvcDownCount  
  Integer32 as csAtmConnOamLoopbackRetryPvcDownRetryDelay  
  Integer32 as csAtmConnOamLoopbackRetryPvcDownAge  
  INTEGER as csAtmConnOamLoopbackManageVc  
  INTEGER as csAtmConnOamLoopbackStatus  

CsAtmConnDynamicArpCacheEntry  
SEQUENCE    
  IpAddress as csAtmConnDynamicArpCacheIpAddress  
  MacAddress as csAtmConnDynamicArpCacheMacAddress  
  RowStatus as csAtmConnDynamicArpCacheRowStatus  

CsAtmConnStaticArpCacheEntry  
SEQUENCE    
  IpAddress as csAtmConnStaticArpCacheIpAddress  
  MacAddress as csAtmConnStaticArpCacheMacAddress  
  RowStatus as csAtmConnStaticArpCacheRowStatus  

CsAtmConnIpAddressEntry  
SEQUENCE    
  IpAddress as csAtmConnIpAddressIpAddress  
  RowStatus as csAtmConnIpAddressRowStatus  
  INTEGER as csAtmConnIpAddressType  

CsAtmInterfaceConfStatsEntry  
SEQUENCE    
  Counter64 as csAtmInterfaceConfTransmittedPackets  
  Counter64 as csAtmInterfaceConfTransmittedBytes  
  Counter64 as csAtmInterfaceConfTransmitErrors  
  Counter64 as csAtmInterfaceConfTransmitOperationallyDown  
  Counter64 as csAtmInterfaceConfTransmitQueueFull  
  Counter64 as csAtmInterfaceConfTransmitBadLength  
  Counter64 as csAtmInterfaceConfTransmitIncomplete  
  Counter64 as csAtmInterfaceConfTransmitVcNotOpened  
  Counter64 as csAtmInterfaceConfReceivedPackets  
  Counter64 as csAtmInterfaceConfReceivedBytes  
  Counter64 as csAtmInterfaceConfReceivedEncapsulationErrors  
  Counter64 as csAtmInterfaceConfReceivedUnknownProtocolErrors  
  Counter64 as csAtmInterfaceConfReceivedGenericErrors  
  Counter64 as csAtmInterfaceConfReceivedOperationallyDown  
  Counter64 as csAtmInterfaceConfReceivedDroppedPkts  
  Counter64 as csAtmInterfaceConfReceivedBufferAllocationFail  
  Counter64 as csAtmInterfaceConfReceivedBadVc  
  Counter64 as csAtmInterfaceConfReceivedBadAalType  
  Counter64 as csAtmInterfaceConfReceivedBadAalLength  
  Counter64 as csAtmInterfaceConfReceivedCRCErrors  
  Counter64 as csAtmInterfaceConfReceivedDroppedCells  
  Counter64 as csAtmInterfaceConfReceivedInvalidVpiVciCells  
  Counter64 as csAtmInterfaceConfTransmittedOamLoopBackRequests  
  Counter64 as csAtmInterfaceConfReceivedOamLoopBackResponses  
  Counter64 as csAtmInterfaceConfRespondedOAMLoopBackRequests  
  Counter64 as csAtmInterfaceConfOamLoopBackTransmitFail  
  Counter64 as csAtmInterfaceConfTransmitCollisions  
  Counter64 as csAtmInterfaceConfTransmittedCells  
  Counter64 as csAtmInterfaceReceivedBadAAL5HdrTrailers  
  Counter64 as csAtmInterfaceReceivedCells  

CsAtmConnStatsEntry  
SEQUENCE    
  Counter64 as csAtmConnTransmittedPackets  
  Counter64 as csAtmConnTransmittedBytes  
  Counter64 as csAtmConnTransmitErrors  
  Counter64 as csAtmConnTransmitOperationallyDown  
  Counter64 as csAtmConnTransmitQueueFull  
  Counter64 as csAtmConnTransmitBadLength  
  Counter64 as csAtmConnReceivedPackets  
  Counter64 as csAtmConnReceivedBytes  
  Counter64 as csAtmConnReceivedEncapsulationErrors  
  Counter64 as csAtmConnReceivedUnknownProtocolErrors  
  Counter64 as csAtmConnReceivedGenericErrors  
  Counter64 as csAtmConnReceivedOperationallyDown  
  Counter64 as csAtmConnReceivedDroppedPkts  
  Counter64 as csAtmConnReceivedBufferAllocationFail  
  Counter64 as csAtmConnReceivedBadAalType  
  Counter64 as csAtmConnReceivedBadAalLength  
  Counter64 as csAtmConnReceivedCRCErrors  
  Counter64 as csAtmConnTransmittedOamLoopBackRequests  
  Counter64 as csAtmConnReceivedOamLoopBackResponses  
  Counter64 as csAtmConnRespondedOAMLoopBackRequests  
  Counter64 as csAtmConnOamLoopBackTransmitFail  
  Counter64 as csAtmConnTransmittedArpRequests  
  Counter64 as csAtmConnTransmittedArpResponses  
  Counter64 as csAtmConnReceivedArpRequests  
  Counter64 as csAtmConnReceivedArpResponses  
  Counter64 as csAtmConnUnRespondedArpRequests  
  Counter64 as csAtmConnArpErrors  
  Counter64 as csAtmConnTransmittedCells  
  Counter64 as csAtmConnTransmitDroppedPkts  
  Counter64 as csAtmConnReceivedCells  

CsAtmConnInArpStatisticsEntry  
SEQUENCE    
  Counter64 as csAtmConnInArpInReqs  
  Counter64 as csAtmConnInArpOutReqs  
  Counter64 as csAtmConnInArpInReplies  
  Counter64 as csAtmConnInArpOutReplies  
  Counter64 as csAtmConnInArpInvalidInReqs  
  Counter64 as csAtmConnInArpInvalidOutReqs  
  Counter64 as csAtmConnInArpGenericErrors  

CsPosInterfaceConfEntry  
SEQUENCE    
  Integer32 as csPosInterfaceConfSlotIndex  
  Integer32 as csPosInterfaceConfModuleIndex  
  Integer32 as csPosInterfaceConfPortIndex  
  INTEGER as csPosEncapsulation  
  INTEGER as csPosAdminStatus  
  OperStatus as csPosOperStatus  

CsOrionVPNEntry  
SEQUENCE    
  Integer32 as csOrionGlobalVPNIndex  
  DisplayString as csOrionVPNName  
  Integer32 as csOrionVPNRadiusSvrList  
  Integer32 as csOrionVPNDNSSvrList  
  RowStatus as csOrionVPNRowStatus  
  OperStatus as csOrionVPNOperStatus  

CsOrionVPNVRouterEntry  
SEQUENCE    
  IpAddress as csOrionVPNVRouterIndex  
  DisplayString as csOrionVPNVRouterName  
  INTEGER as csOrionVPNVRouterIpForwarding  
  Integer32 as csOrionVPNVRouterIpDefaultTTL  
  Integer32 as csOrionVPNVRouterIpReasmTimeout  
  RowStatus as csOrionVPNVRouterRowStatus  
  OperStatus as csOrionVPNVRouterOperStatus  
  DisplayString as csOrionVPNVRouterLocations  
  INTEGER as csOrionVPNVRouterType  
  INTEGER as csOrionVPNVRouterIpDecTtl  
  INTEGER as csOrionVPNVRouterIpDsByte  
  DisplayString as csOrionVPNVRouterOperLocations  
  INTEGER as csOrionVPNVRouterDenyPktFilterEvlogStatus  
  DisplayString as csOrionVPNVRouterBackupPEs  
  TruthValue as csOrionVPNVRouterFailOver  
  TruthValue as csOrionVPNVRouterAbortFailOver  
  TruthValue as csOrionVPNVRouterFailbackToPrimary  
  DisplayString as csOrionVPNVRouterCreationTime  
  DisplayString as csOrionVPNVRouterUpTime  

CsImpPolEntry  
SEQUENCE    
  Integer32 as csImpPolId  
  Integer32 as csImpPolGenAclId  
  Integer32 as csImpPolPeerAS  
  Integer32 as csImpPolHomeAS  
  INTEGER as csImpPolOrigin  
  INTEGER as csImpPolAction  
  Integer32 as csImpPolPreference  
  RowStatus as csImpPolRowStatus  
  Integer32 as csImpPolBgpCommunity1  

CsExpPolEntry  
SEQUENCE    
  Integer32 as csExpPolId  
  Integer32 as csExpPolGenAclId  
  Integer32 as csExpPolPeerAS  
  INTEGER as csExpPolProtocol  
  Integer32 as csExpPolEgpAS  
  Integer32 as csExpPolBgpAS  
  Integer32 as csExpPolExtRteTag  
  IpAddress as csExpPolRipIp  
  IpAddress as csExpPolRipNbrIp  
  INTEGER as csExpPolAction  
  Integer32 as csExpPolMetric  
  RowStatus as csExpPolRowStatus  
  Integer32 as csExpPolBgpCommunity1  
  Integer32 as csExpPolBgpCommunity2  
  INTEGER as csExpPolRouteType  
  INTEGER as csExpPolMetricType  
  INTEGER as csExpPolLevel  

CsRtPolicyTermEntry  
SEQUENCE    
  DisplayString as csRtPolicyName  
  DisplayString as csRtPolicyTermName  
  Integer32 as csRtPolicyTermSeqNum  
  DisplayString as csRtPolicyTermFromBgpASPathName  
  TruthValue as csRtPolicyTermFromVpnRouteTargetNamesListFlag  
  DisplayString as csRtPolicyTermFromVpnSoo  
  DisplayString as csRtPolicyTermFromVpnRd  
  TruthValue as csRtPolicyTermFromBgpCommNamesListFlag  
  Integer32 as csRtPolicyTermFromBgpLocalPref  
  INTEGER as csRtPolicyTermFromBgpOrigin  
  Integer32 as csRtPolicyTermFromIntfIndex  
  IpAddress as csRtPolicyTermFromIntfAddr  
  INTEGER as csRtPolicyTermFromIsisLevel  
  INTEGER as csRtPolicyTermFromIsisMetricType  
  Integer32 as csRtPolicyTermFromMetric1  
  Integer32 as csRtPolicyTermFromMetric2  
  IpAddress as csRtPolicyTermFromNbrAddr  
  DisplayString as csRtPolicyTermFromNbrGroupName  
  IpAddress as csRtPolicyTermFromNextHopAddrIndex  
  IpAddress as csRtPolicyTermFromOspfArea  
  INTEGER as csRtPolicyTermFromOspfAreaType  
  INTEGER as csRtPolicyTermFromOspfMetricType  
  Integer32 as csRtPolicyTermFromOspfTag1  
  Integer32 as csRtPolicyTermFromOspfTag2  
  TruthValue as csRtPolicyTermFromPolicyNamesListFlag  
  Integer32 as csRtPolicyTermFromPreference1  
  Integer32 as csRtPolicyTermFromPreference2  
  TruthValue as csRtPolicyTermFromPrefixNamesListFlag  
  TruthValue as csRtPolicyTermFromRouteFilterFlag  
  Unsigned32 as csRtPolicyTermFromProtocol  
  INTEGER as csRtPolicyTermToIsisLevel  
  INTEGER as csRtPolicyTermToOspfAreaType  
  IpAddress as csRtPolicyTermToNbrAddr  
  DisplayString as csRtPolicyTermToNbrGroupName  
  TruthValue as csRtPolicyTermActionFlag  
  DisplayString as csRtPolicyTermActionBgpASPathName  
  INTEGER as csRtPolicyTermActionBgpASPathOp  
  TruthValue as csRtPolicyTermActionVpnRouteTargetNamesListFlag  
  INTEGER as csRtPolicyTermActionVpnRouteTargetOp  
  INTEGER as csRtPolicyTermActionVpnSooOp  
  DisplayString as csRtPolicyTermActionVpnSoo  
  DisplayString as csRtPolicyTermActionVpnRd  
  TruthValue as csRtPolicyTermActionBgpCommNamesListFlag  
  INTEGER as csRtPolicyTermActionBgpCommOp  
  Integer32 as csRtPolicyTermActionBgpLocalPref  
  INTEGER as csRtPolicyTermActionBgpLocalPrefOp  
  INTEGER as csRtPolicyTermActionBgpOrigin  
  INTEGER as csRtPolicyTermActionBgpMetricType  
  Integer32 as csRtPolicyTermActionMetric  
  INTEGER as csRtPolicyTermActionMetricOp  
  Integer32 as csRtPolicyTermActionMetric2  
  INTEGER as csRtPolicyTermActionMetric2Op  
  INTEGER as csRtPolicyTermActionIsisMetricType  
  INTEGER as csRtPolicyTermActionNextHopAddrType  
  IpAddress as csRtPolicyTermActionNextHopAddr  
  INTEGER as csRtPolicyTermActionOspfMetricType  
  Integer32 as csRtPolicyTermActionOspfTag  
  INTEGER as csRtPolicyTermActionOspfTagOp  
  Integer32 as csRtPolicyTermActionOspfTag2  
  INTEGER as csRtPolicyTermActionOspfTag2Op  
  Integer32 as csRtPolicyTermActionPreference  
  INTEGER as csRtPolicyTermActionPreferenceOp  
  Integer32 as csRtPolicyTermActionPreference2  
  INTEGER as csRtPolicyTermActionPreference2Op  
  INTEGER as csRtPolicyTermActionFlow  
  TruthValue as csRtPolicyTermActionLogFlag  
  RowStatus as csRtPolicyTermRowStatus  

CsPolicyRouteFilterEntry  
SEQUENCE    
  IpAddress as csPolicyRouteFilterPrefix  
  Integer32 as csPolicyRouteFilterPrefixLen  
  INTEGER as csPolicyRouteFilterMatchType  
  IpAddress as csPolicyRouteFilterPrefix2  
  Integer32 as csPolicyRouteFilterPrefixLen2  
  Integer32 as csPolicyRouteFilterSeqNum  
  INTEGER as csRtPolicyRouteFilterActionFlow  
  TruthValue as csRtPolicyRouteFilterActionLogFlag  
  RowStatus as csPolicyRouteFilterRowStatus  

CsRtPolicyPrefixListEntry  
SEQUENCE    
  DisplayString as csRtPolicyPrefixListName  
  IpAddress as csRtPolicyPrefixListPrefix  
  Integer32 as csRtPolicyPrefixListPrefixLen  
  INTEGER as csRtPolicyPrefixListMatchType  
  IpAddress as csRtPolicyPrefixListPrefix2  
  Integer32 as csRtPolicyPrefixListPrefixLen2  
  RowStatus as csRtPolicyPrefixListRowStatus  

CsRtPolicyStrEntry  
SEQUENCE    
  INTEGER as csRtPolicyStrType  
  DisplayString as csRtPolicyStrName  
  DisplayString as csRtPolicyStrData  
  RowStatus as csRtPolicyStrRowStatus  

CsRtPolicyUserEntry  
SEQUENCE    
  INTEGER as csRtPolicyUserType  
  DisplayString as csRtPolicyUserIndexValue  
  INTEGER as csRtPolicyUserPolicyType  
  DisplayString as csRtPolicyUserPolicyString  
  RowStatus as csRtPolicyUserRowStatus  

CsOrionPingCtlEntry  
SEQUENCE    
  DisplayString as csOrionPingCtlTestName  
  IpAddress as csOrionPingCtlTargetAddress  
  Unsigned32 as csOrionPingCtlTimeOut  
  Unsigned32 as csOrionPingCtlProbeCount  
  INTEGER as csOrionPingCtlAdminStatus  
  Unsigned32 as csOrionPingCtlFrequency  
  Unsigned32 as csOrionPingCtlTrapFilter  
  RowStatus as csOrionPingCtlRowStatus  
  IpAddress as csOrionPingCtlSourceAddress  
  Unsigned32 as csOrionPingCtlLength  
  Unsigned32 as csOrionPingCtlTtl  

CsOrionPingResultsEntry  
SEQUENCE    
  IpAddress as csOrionPingResultsIpTargetAddress  
  Unsigned32 as csOrionPingResultsMinRtt  
  Unsigned32 as csOrionPingResultsMaxRtt  
  Unsigned32 as csOrionPingResultsAverageRtt  
  Counter32 as csOrionPingResultsProbeResponses  
  Counter32 as csOrionPingResultsSentProbes  
  Counter32 as csOrionPingResultsErrors  
  Counter32 as csOrionPingResultsTimeOuts  
  Counter32 as csOrionPingResultsLates  
  Counter32 as csOrionPingResultsUnreachables  
  INTEGER as csOrionPingResultsCurrentStatus  

CsOrionTraceRouteReqEntry  
SEQUENCE    
  Integer32 as csOrionTraceRouteReqIndex  
  IpAddress as csOrionTraceRouteReqDestAddr  
  Integer32 as csOrionTraceRouteReqHops  
  IpAddress as csOrionTraceRouteReqSrcAddr  
  INTEGER as csOrionTraceRouteReqStatus  
  RowStatus as csOrionTraceRouteReqRowStatus  

CsOrionTraceRouteResultEntry  
SEQUENCE    
  Integer32 as csOrionTraceRouteResultIndex  
  Integer32 as csOrionTraceRouteResultHopNum  
  Integer32 as csOrionTraceRouteResultRtt1  
  Integer32 as csOrionTraceRouteResultRtt2  
  Integer32 as csOrionTraceRouteResultRtt3  
  IpAddress as csOrionTraceRouteResultHopAddr  
  OCTET STRING as csOrionTraceRouteResultMplsLabelStackInfo  

CsOrionVIfaceEntry  
SEQUENCE    
  Integer32 as csOrionVIfIndex  
  DisplayString as csOrionVIfRemoteEnd  
  IpAddress as csOrionVIfIpAddress  
  IpAddress as csOrionVIfIpMask  
  INTEGER as csOrionVIfBcastAddr  
  Integer32 as csOrionVIfMtu  
  INTEGER as csOrionVIfFrameType  
  INTEGER as csOrionVIfType  
  Gauge32 as csOrionVIfSpeed  
  TimeTicks as csOrionVIfLastChange  
  DisplayString as csOrionVIfCryptoMapName  
  RowStatus as csOrionVIfRowStatus  
  OperStatus as csOrionVIfOperStatus  
  Integer32 as csOrionVIfRateLimitNumBytes  
  Integer32 as csOrionVIfRateLimitInterval  
  Integer32 as csOrionVIfRateLimitRate  
  Integer32 as csOrionVIfRateLimitBurstSize  
  IpAddress as csOrionVIfRemIpAddress  
  INTEGER as csOrionVIfRemIpAddressType  
  Integer32 as csOrionVIfMtuOperational  

CsOrionViStatsEntry  
SEQUENCE    
  Counter64 as csOrionViStatsInOctets  
  Counter64 as csOrionViStatsInUcastPkts  
  Counter64 as csOrionViStatsInNUcastPkts  
  Counter64 as csOrionViStatsInDiscards  
  Counter64 as csOrionViStatsInErrors  
  Counter64 as csOrionViStatsInUnknownProtos  
  Counter64 as csOrionViStatsOutOctets  
  Counter64 as csOrionViStatsOutUcastPkts  
  Counter64 as csOrionViStatsOutNUcastPkts  
  Counter64 as csOrionViStatsOutDiscards  
  Counter64 as csOrionViStatsOutErrors  
  Counter64 as csOrionViStatsRateLimitTxBytesSubmitted  
  Counter64 as csOrionViStatsRateLimitTxPktsSubmitted  
  Counter64 as csOrionViStatsRateLimitTxBytesDropped  
  Counter64 as csOrionViStatsRateLimitTxPktsDropped  
  Counter64 as csOrionViStatsRateLimitRxBytesSubmitted  
  Counter64 as csOrionViStatsRateLimitRxPktsSubmitted  
  Counter64 as csOrionViStatsRateLimitRxBytesDropped  
  Counter64 as csOrionViStatsRateLimitRxPktsDropped  
  Counter64 as csOrionViStatsRateLimitTimeElapsed  

CsOrionGreConfigEntry  
SEQUENCE    
  INTEGER as csOrionGreKeyEnable  
  Unsigned32 as csOrionGreKey  
  INTEGER as csOrionGreSequence  
  INTEGER as csOrionGreCheckSum  
  INTEGER as csOrionGreAdminStatus  

CsOrionGreStatsEntry  
SEQUENCE    
  Counter32 as csOrionGreStatsKeyErrors  
  Counter32 as csOrionGreStatsSequenceErrors  
  Counter32 as csOrionGreStatsUnknownProto  
  Counter32 as csOrionGreStatsHeaderErrors  

CsOrionVPNVRouterIpStatsEntry  
SEQUENCE    
  Counter64 as csOrionVPNVRouterIpInReceives  
  Counter64 as csOrionVPNVRouterIpInHdrErrors  
  Counter64 as csOrionVPNVRouterIpInAddrErrors  
  Counter64 as csOrionVPNVRouterIpForwDatagrams  
  Counter64 as csOrionVPNVRouterIpInUnknownProtos  
  Counter64 as csOrionVPNVRouterIpInDiscards  
  Counter64 as csOrionVPNVRouterIpInDelivers  
  Counter64 as csOrionVPNVRouterIpOutRequests  
  Counter64 as csOrionVPNVRouterIpOutDiscards  
  Counter64 as csOrionVPNVRouterIpOutNoRoutes  
  Counter64 as csOrionVPNVRouterIpReasmReqds  
  Counter64 as csOrionVPNVRouterIpReasmOKs  
  Counter64 as csOrionVPNVRouterIpReasmFails  
  Counter64 as csOrionVPNVRouterIpFragOKs  
  Counter64 as csOrionVPNVRouterIpFragFails  
  Counter64 as csOrionVPNVRouterIpFragCreates  

CsOrionVPNVRouterIpAddrEntry  
SEQUENCE    
  IpAddress as csOrionVPNVRouterIpAdEntAddr  
  Integer32 as csOrionVPNVRouterIpAdEntIfIndex  
  IpAddress as csOrionVPNVRouterIpAdEntNetMask  
  Integer32 as csOrionVPNVRouterIpAdEntBcastAddr  
  Integer32 as csOrionVPNVRouterIpAdEntReasmMaxSize  
  RowStatus as csOrionVPNVRouterIpAdEntRowStatus  
  OperStatus as csOrionVPNVRouterIpAdEntOperStatus  

CsOrionVPNVRouterIpRouteEntry  
SEQUENCE    
  IpAddress as csOrionVPNVRouterIpRouteDest  
  IpAddress as csOrionVPNVRouterIpRouteMask  
  Integer32 as csOrionVPNVRouterIpRouteTos  
  IpAddress as csOrionVPNVRouterIpRouteNextHop  
  Integer32 as csOrionVPNVRouterIpRouteIfIndex  
  INTEGER as csOrionVPNVRouterIpRouteType  
  INTEGER as csOrionVPNVRouterIpRouteProto  
  Integer32 as csOrionVPNVRouterIpRouteAge  
  OBJECT IDENTIFIER as csOrionVPNVRouterIpRouteInfo  
  Integer32 as csOrionVPNVRouterIpRouteNextHopAS  
  Integer32 as csOrionVPNVRouterIpRouteMetric1  
  Integer32 as csOrionVPNVRouterIpRouteMetric2  
  Integer32 as csOrionVPNVRouterIpRouteMetric3  
  Integer32 as csOrionVPNVRouterIpRouteMetric4  
  Integer32 as csOrionVPNVRouterIpRouteMetric5  
  RowStatus as csOrionVPNVRouterIpRouteRowStatus  
  OperStatus as csOrionVPNVRouterIpRouteOperStatus  

CsOrionVPNVRouterIpNetToMediaEntry  
SEQUENCE    
  Integer32 as csOrionVPNVRouterIpNetToMediaIfIndex  
  PhysAddress as csOrionVPNVRouterIpNetToMediaPhysAddress  
  IpAddress as csOrionVPNVRouterIpNetToMediaNetAddress  
  INTEGER as csOrionVPNVRouterIpNetToMediaType  

CsOrionIpLocalAddrPoolEntry  
SEQUENCE    
  DisplayString as csOrionIpLocalAddrPoolName  
  IpAddress as csOrionIpLocalAddrPoolStartRange  
  IpAddress as csOrionIpLocalAddrPoolEndRange  
  RowStatus as csOrionIpLocalAddrPoolRowStatus  

CsOrionVPNVRouterManagedIpRouteEntry  
SEQUENCE    
  INTEGER as csOrionVPNVRouterManagedIpRouteOwner  
  IpAddress as csOrionVPNVRouterManagedIpRouteDest  
  IpAddress as csOrionVPNVRouterManagedIpRouteMask  
  Integer32 as csOrionVPNVRouterManagedIpRouteTos  
  IpAddress as csOrionVPNVRouterManagedIpRouteNextHop  
  Integer32 as csOrionVPNVRouterManagedIpRouteIfIndex  
  INTEGER as csOrionVPNVRouterManagedIpRouteType  
  INTEGER as csOrionVPNVRouterManagedIpRouteProto  
  Integer32 as csOrionVPNVRouterManagedIpRouteAge  
  OBJECT IDENTIFIER as csOrionVPNVRouterManagedIpRouteInfo  
  Integer32 as csOrionVPNVRouterManagedIpRouteNextHopAS  
  Integer32 as csOrionVPNVRouterManagedIpRouteMetric1  
  Integer32 as csOrionVPNVRouterManagedIpRouteMetric2  
  Integer32 as csOrionVPNVRouterManagedIpRouteMetric3  
  Integer32 as csOrionVPNVRouterManagedIpRouteMetric4  
  Integer32 as csOrionVPNVRouterManagedIpRouteMetric5  
  Integer32 as csOrionVPNVRouterManagedIpRoutePreference1  
  Integer32 as csOrionVPNVRouterManagedIpRoutePreference2  
  Integer32 as csOrionVPNVRouterManagedIpRouteColor1  
  Integer32 as csOrionVPNVRouterManagedIpRouteColor2  
  INTEGER as csOrionVPNVRouterManagedIpRouteActiveOption  
  INTEGER as csOrionVPNVRouterManagedIpRouteInstallOption  
  INTEGER as csOrionVPNVRouterManagedIpRouteAdvertiseOption  
  INTEGER as csOrionVPNVRouterManagedIpRouteRetainOption  
  RowStatus as csOrionVPNVRouterManagedIpRouteRowStatus  
  OperState as csOrionVPNVRouterManagedIpRouteOperState  

AreaID  
An OSPF Area Identifier.
TEXTUAL-CONVENTION    
  IpAddress  

RouterID  
A OSPF Router Identifier.
TEXTUAL-CONVENTION    
  IpAddress  

Metric  
The OSPF Internal Metric.
TEXTUAL-CONVENTION    
  Integer32 0..'FFFF'h  

BigMetric  
The OSPF External Metric.
TEXTUAL-CONVENTION    
  Integer32 0..'FFFFFF'h  

Status  
The status of an interface: 'enabled' indicates that it is willing to communicate with other OSPF Routers, while 'disabled' indicates that it is not.
TEXTUAL-CONVENTION    
  INTEGER enabled(1), disabled(2)  

PositiveInteger  
A positive integer. Values in excess are precluded as unnecessary and prone to interoperability issues.
TEXTUAL-CONVENTION    
  Integer32 0..'7FFFFFFF'h  

HelloRange  
The range of intervals on which hello messages are exchanged.
TEXTUAL-CONVENTION    
  Integer32 1..'FFFF'h  

UpToMaxAge  
The values that one might find or configure for variables bounded by the maximum age of an LSA.
TEXTUAL-CONVENTION    
  Integer32 0..3600  

InterfaceIndex  
The range of ifIndex.
TEXTUAL-CONVENTION    
  Integer32  

DesignatedRouterPriority  
The values defined for the priority of a system for becoming the designated router.
TEXTUAL-CONVENTION    
  Integer32 0..'FF'h  

TOSType  
Type of Service is defined as a mapping to the IP Type of Service Flags as defined in the IP Forwarding Table MIB +-----+-----+-----+-----+-----+-----+-----+-----+ | | | | | PRECEDENCE | TYPE OF SERVICE | 0 | | | | | +-----+-----+-----+-----+-----+-----+-----+-----+ IP TOS IP TOS Field Policy Field Policy Contents Code Contents Code 0 0 0 0 ==> 0 0 0 0 1 ==> 2 0 0 1 0 ==> 4 0 0 1 1 ==> 6 0 1 0 0 ==> 8 0 1 0 1 ==> 10 0 1 1 0 ==> 12 0 1 1 1 ==> 14 1 0 0 0 ==> 16 1 0 0 1 ==> 18 1 0 1 0 ==> 20 1 0 1 1 ==> 22 1 1 0 0 ==> 24 1 1 0 1 ==> 26 1 1 1 0 ==> 28 1 1 1 1 ==> 30 The remaining values are left for future definition.
TEXTUAL-CONVENTION    
  Integer32 0..30  

CsOspfGeneralEntry  
SEQUENCE    
  RouterID as csOspfRouterId  
  Status as csOspfAdminStat  
  INTEGER as csOspfVersionNumber  
  TruthValue as csOspfAreaBdrRtrStatus  
  TruthValue as csOspfASBdrRtrStatus  
  Gauge32 as csOspfExternLsaCount  
  Integer32 as csOspfExternLsaCksumSum  
  TruthValue as csOspfTOSSupport  
  Counter32 as csOspfOriginateNewLsas  
  Counter32 as csOspfRxNewLsas  
  Integer32 as csOspfExtLsdbLimit  
  Integer32 as csOspfMulticastExtensions  
  PositiveInteger as csOspfExitOverflowInterval  
  TruthValue as csOspfDemandExtensions  
  RowStatus as csOspfGeneralEntryRowStatus  
  INTEGER as csOspfSpfDelay  
  INTEGER as csOspfSpfHold  
  INTEGER as csOspfRefBw  
  INTEGER as csOspfPrefInt  
  INTEGER as csOspfPrefExt  

CsOspfAreaEntry  
SEQUENCE    
  AreaID as csOspfAreaId  
  DisplayString as csOspfAreaName  
  INTEGER as csOspfImportAsExtern  
  Counter32 as csOspfSpfRuns  
  Gauge32 as csOspfAreaBdrRtrCount  
  Gauge32 as csOspfAsBdrRtrCount  
  Gauge32 as csOspfAreaLsaCount  
  Integer32 as csOspfAreaLsaCksumSum  
  INTEGER as csOspfAreaSummary  
  INTEGER as csOspfAreaAuthType  
  RowStatus as csOspfAreaRowStatus  
  OperStatus as csOspfAreaOperStatus  

CsOspfStubAreaEntry  
SEQUENCE    
  AreaID as csOspfStubAreaId  
  TOSType as csOspfStubTOS  
  BigMetric as csOspfStubMetric  
  RowStatus as csOspfStubStatus  
  INTEGER as csOspfStubMetricType  

CsOspfLsdbEntry  
SEQUENCE    
  AreaID as csOspfLsdbAreaId  
  INTEGER as csOspfLsdbType  
  IpAddress as csOspfLsdbLsid  
  RouterID as csOspfLsdbRouterId  
  Integer32 as csOspfLsdbSequence  
  Integer32 as csOspfLsdbAge  
  Integer32 as csOspfLsdbChecksum  
  OCTET STRING as csOspfLsdbAdvertisement  

CsOspfHostEntry  
SEQUENCE    
  IpAddress as csOspfHostIpAddress  
  TOSType as csOspfHostTOS  
  Metric as csOspfHostMetric  
  RowStatus as csOspfHostStatus  
  AreaID as csOspfHostAreaID  

CsOspfIfEntry  
SEQUENCE    
  IpAddress as csOspfIfIpAddress  
  Integer32 as csOspfAddressLessIf  
  AreaID as csOspfIfAreaId  
  INTEGER as csOspfIfType  
  Status as csOspfIfAdminStatus  
  DesignatedRouterPriority as csOspfIfRtrPriority  
  UpToMaxAge as csOspfIfTransitDelay  
  UpToMaxAge as csOspfIfRetransInterval  
  HelloRange as csOspfIfHelloInterval  
  PositiveInteger as csOspfIfRtrDeadInterval  
  PositiveInteger as csOspfIfPollInterval  
  INTEGER as csOspfIfState  
  IpAddress as csOspfIfDesignatedRouter  
  IpAddress as csOspfIfBackupDesignatedRouter  
  Counter32 as csOspfIfEvents  
  INTEGER as csOspfIfAuthType  
  OCTET STRING as csOspfIfAuthKey  
  INTEGER as csOspfIfMulticastForwarding  
  TruthValue as csOspfIfDemand  
  Metric as csOspfIfMetric  
  INTEGER as csOspfIfAdvertiseSubnet  
  RowStatus as csOspfIfStatus  
  TruthValue as csOspfIfPassive  

CsOspfIfMd5Entry  
SEQUENCE    
  Integer32 as csOspfIfMd5MessageDigestKeyId  
  OCTET STRING as csOspfIfMd5Key  
  RowStatus as csOspfIfMd5RowStatus  

CsOspfIfMetricEntry  
SEQUENCE    
  IpAddress as csOspfIfMetricIpAddress  
  Integer32 as csOspfIfMetricAddressLessIf  
  TOSType as csOspfIfMetricTOS  
  Metric as csOspfIfMetricValue  
  RowStatus as csOspfIfMetricStatus  

CsOspfVirtIfEntry  
SEQUENCE    
  AreaID as csOspfVirtIfAreaId  
  RouterID as csOspfVirtIfNeighbor  
  UpToMaxAge as csOspfVirtIfTransitDelay  
  UpToMaxAge as csOspfVirtIfRetransInterval  
  HelloRange as csOspfVirtIfHelloInterval  
  PositiveInteger as csOspfVirtIfRtrDeadInterval  
  INTEGER as csOspfVirtIfState  
  Counter32 as csOspfVirtIfEvents  
  INTEGER as csOspfVirtIfAuthType  
  OCTET STRING as csOspfVirtIfAuthKey  
  RowStatus as csOspfVirtIfStatus  

CsOspfNbrEntry  
SEQUENCE    
  IpAddress as csOspfNbrIpAddr  
  InterfaceIndex as csOspfNbrAddressLessIndex  
  RouterID as csOspfNbrRtrId  
  Integer32 as csOspfNbrOptions  
  DesignatedRouterPriority as csOspfNbrPriority  
  INTEGER as csOspfNbrState  
  Counter32 as csOspfNbrEvents  
  Gauge32 as csOspfNbrLsRetransQLen  
  RowStatus as csOspfNbmaNbrStatus  
  INTEGER as csOspfNbmaNbrPermanence  
  TruthValue as csOspfNbrHelloSuppressed  

CsOspfVirtNbrEntry  
SEQUENCE    
  AreaID as csOspfVirtNbrArea  
  RouterID as csOspfVirtNbrRtrId  
  IpAddress as csOspfVirtNbrIpAddr  
  Integer32 as csOspfVirtNbrOptions  
  INTEGER as csOspfVirtNbrState  
  Counter32 as csOspfVirtNbrEvents  
  Gauge32 as csOspfVirtNbrLsRetransQLen  
  TruthValue as csOspfVirtNbrHelloSuppressed  

CsOspfExtLsdbEntry  
SEQUENCE    
  INTEGER as csOspfExtLsdbType  
  IpAddress as csOspfExtLsdbLsid  
  RouterID as csOspfExtLsdbRouterId  
  Integer32 as csOspfExtLsdbSequence  
  Integer32 as csOspfExtLsdbAge  
  Integer32 as csOspfExtLsdbChecksum  
  OCTET STRING as csOspfExtLsdbAdvertisement  

CsOspfAreaAggregateEntry  
SEQUENCE    
  AreaID as csOspfAreaAggregateAreaID  
  INTEGER as csOspfAreaAggregateLsdbType  
  IpAddress as csOspfAreaAggregateNet  
  IpAddress as csOspfAreaAggregateMask  
  RowStatus as csOspfAreaAggregateStatus  
  INTEGER as csOspfAreaAggregateEffect  

CsOspfImpPolEntry  
SEQUENCE    
  Integer32 as csOspfImpPolId  
  RowStatus as csOspfImpPolStatus  

CsOspfExpPolEntry  
SEQUENCE    
  Integer32 as csOspfExpPolId  
  RowStatus as csOspfExpPolStatus  

CsRipGlobalStatEntry  
SEQUENCE    
  Counter32 as csRipGlobalRouteChanges  
  Counter32 as csRipGlobalQueries  

CsRipIfStatEntry  
SEQUENCE    
  Counter32 as csRipIfStatRcvBadPackets  
  Counter32 as csRipIfStatRcvBadRoutes  
  Counter32 as csRipIfStatSentUpdates  

CsRipGlobalConfEntry  
SEQUENCE    
  INTEGER as csRipGlobalConfStatus  
  INTEGER as csRipGlobalConfAgeTime  
  INTEGER as csRipGlobalConfPerUpdateInt  
  INTEGER as csRipGlobalConfJitterUpdateStatus  
  INTEGER as csRipGlobalConfRfc1058CalcStatus  
  INTEGER as csRipGlobalConfReqOnStartup  
  RowStatus as csRipGlobalConfRowStatus  
  Unsigned32 as csRipGlobalConfLogAreaFlag  
  Unsigned32 as csRipGlobalConfLogLevelFlag  

CsRipIfConfEntry  
SEQUENCE    
  INTEGER as csRipIfConfStatus  
  INTEGER as csRipIfConfSend  
  INTEGER as csRipIfConfReceiveV1  
  INTEGER as csRipIfConfReceiveV2  
  INTEGER as csRipIfConfSendDefRoute  
  INTEGER as csRipIfConfRcvDefRoute  
  INTEGER as csRipIfConfSplitHorizon  
  INTEGER as csRipIfConfPoisonReverse  
  INTEGER as csRipIfConfFlashUpdate  
  INTEGER as csRipIfConfRipV1Compatibility  
  DisplayString as csRipIfConfAuthPassword  
  RowStatus as csRipIfConfRowStatus  

CsRipImpPolEntry  
SEQUENCE    
  Integer32 as csRipImpPolId  
  RowStatus as csRipImpPolStatus  

CsRipExpPolEntry  
SEQUENCE    
  Integer32 as csRipExpPolId  
  RowStatus as csRipExpPolStatus  

CsOrionVPNVRouterTcpEntry  
SEQUENCE    
  INTEGER as csOrionVPNVRouterTcpRtoAlgorithm  
  Integer32 as csOrionVPNVRouterTcpRtoMin  
  Integer32 as csOrionVPNVRouterTcpRtoMax  
  Integer32 as csOrionVPNVRouterTcpMaxConn  
  Counter32 as csOrionVPNVRouterTcpActiveOpens  
  Counter32 as csOrionVPNVRouterTcpPassiveOpens  
  Counter32 as csOrionVPNVRouterTcpAttemptFails  
  Counter32 as csOrionVPNVRouterTcpEstabResets  
  Gauge32 as csOrionVPNVRouterTcpCurrEstab  
  Counter32 as csOrionVPNVRouterTcpInSegs  
  Counter32 as csOrionVPNVRouterTcpOutSegs  
  Counter32 as csOrionVPNVRouterTcpRetransSegs  
  Counter32 as csOrionVPNVRouterTcpInErrs  
  Counter32 as csOrionVPNVRouterTcpOutRsts  

CsOrionVPNVRouterTcpConnEntry  
SEQUENCE    
  INTEGER as csOrionVPNVRouterTcpConnState  
  IpAddress as csOrionVPNVRouterTcpConnLocalAddress  
  Integer32 as csOrionVPNVRouterTcpConnLocalPort 0..65535  
  IpAddress as csOrionVPNVRouterTcpConnRemAddress  
  Integer32 as csOrionVPNVRouterTcpConnRemPort 0..65535  

CsOrionVPNVRouterUdpEntry  
SEQUENCE    
  Counter32 as csOrionVPNVRouterUdpInDatagrams  
  Counter32 as csOrionVPNVRouterUdpNoPorts  
  Counter32 as csOrionVPNVRouterUdpInErrors  
  Counter32 as csOrionVPNVRouterUdpOutDatagrams  

CsOrionVPNVRouterUdpListenerEntry  
SEQUENCE    
  IpAddress as csOrionVPNVRouterUdpListenerLocalAddress  
  Integer32 as csOrionVPNVRouterUdpListenerLocalPort 0..65535  

CsBgpGenEntry  
SEQUENCE    
  INTEGER as csBgpGenStatus  
  Integer32 as csBgpGenLocalAS  
  IpAddress as csBgpGenClearConn  
  Integer32 as csBgpGenDefaultMetric  
  Integer32 as csBgpGenDefaultLocalPref  
  Integer32 as csBgpGenConfedId  
  INTEGER as csBgpGenDampEnable  
  Integer32 as csBgpGenDampHalfLife  
  Integer32 as csBgpGenDampReuse  
  Integer32 as csBgpGenDampSuppress  
  Integer32 as csBgpGenDampMaxSuppress  
  RowStatus as csBgpGenRowStatus  
  Unsigned32 as csBgpGenLogAreaFlag  
  Unsigned32 as csBgpGenLogLevelFlag  
  INTEGER as csBgpGenClearConnFlag  
  DisplayString as csBgpGenClearNbrGroupName  
  Integer32 as csBgpGenHoldTimeConfigured  
  Integer32 as csBgpGenKeepAliveConfigured  
  Unsigned32 as csBgpGenVpnLogAreaFlag  
  Integer32 as csBgpGenMaxPfx  
  Integer32 as csBgpGenMaxPfxThreshold  
  INTEGER as csBgpGenMaxPfxType  

CsBgpNbrEntry  
SEQUENCE    
  IpAddress as csBgpNbrAddr  
  IpAddress as csBgpNbrId  
  INTEGER as csBgpNbrState  
  INTEGER as csBgpNbrAdminStatus  
  INTEGER as csBgpNbrRemoteAS  
  OCTET STRING as csBgpNbrMd5Password  
  RowStatus as csBgpNbrRowStatus  
  DisplayString as csBgpNbrGroupNm  
  Integer32 as csBgpNbrHoldTimeConfigured  
  IpAddress as csBgpNbrLocalAddr  
  INTEGER as csBgpNbrNextHopSelf  
  IpAddress as csBgpNbrMhopGw  
  INTEGER as csBgpNbrPassive  
  INTEGER as csBgpNbrMhopTTL  
  INTEGER as csBgpNbrIpv4AdminStatus  
  INTEGER as csBgpNbrVpnIpv4AdminStatus  
  Integer32 as csBgpNbrKeepAliveConfigured  
  INTEGER as csBgpNbrRemovePrivateAs  
  Unsigned32 as csBgpNbrLogAreaFlag  
  Integer32 as csBgpNbrMaxPfx  
  Unsigned32 as csBgpNbrVpnLogAreaFlag  
  Integer32 as csBgpNbrMaxPfxThreshold  
  INTEGER as csBgpNbrMaxPfxType  

CsBgpNbrImpPolEntry  
SEQUENCE    
  Integer32 as csBgpNbrImpPolId  
  RowStatus as csBgpNbrImpPolRowStatus  

CsBgpNbrExpPolEntry  
SEQUENCE    
  Integer32 as csBgpNbrExpPolId  
  RowStatus as csBgpNbrExpPolRowStatus  

CsBgpConfedASEntry  
SEQUENCE    
  Integer32 as csBgpConfedAS  
  RowStatus as csBgpConfedASRowStatus  

CsBgpNetworkEntry  
SEQUENCE    
  IpAddress as csBgpNetworkAddr  
  IpAddress as csBgpNetworkMask  
  RowStatus as csBgpNetworkRowStatus  

CsBgpNbrGroupEntry  
SEQUENCE    
  DisplayString as csBgpNbrGroupName  
  INTEGER as csBgpNbrGroupAdminStatus  
  INTEGER as csBgpNbrGroupRemoteAS  
  OCTET STRING as csBgpNbrGroupMd5Password  
  RowStatus as csBgpNbrGroupRowStatus  
  Integer32 as csBgpNbrGroupHoldTimeConfigured  
  IpAddress as csBgpNbrGroupLocalAddr  
  INTEGER as csBgpNbrGroupNextHopSelf  
  IpAddress as csBgpNbrGroupMhopGw  
  INTEGER as csBgpNbrGroupMhopTTL  
  INTEGER as csBgpNbrGroupIpv4AdminStatus  
  INTEGER as csBgpNbrGroupVpnIpv4AdminStatus  
  INTEGER as csBgpNbrGroupVpnIpv4AllowRfc2547Customers  
  INTEGER as csBgpNbrGroupVpnIpv4AllowVrmodelCustomers  
  Integer32 as csBgpNbrGroupKeepAliveConfigured  
  INTEGER as csBgpNbrGroupRemovePrivateAs  
  Unsigned32 as csBgpNbrGroupLogAreaFlag  
  Integer32 as csBgpNbrGroupMaxPfx  
  Unsigned32 as csBgpNbrGroupVpnLogAreaFlag  
  Integer32 as csBgpNbrGroupMaxPfxThreshold  
  INTEGER as csBgpNbrGroupMaxPfxType  

CsBgpNbrGroupImpPolEntry  
SEQUENCE    
  Integer32 as csBgpNbrGroupImpPolId  
  RowStatus as csBgpNbrGroupImpPolRowStatus  

CsBgpNbrGroupExpPolEntry  
SEQUENCE    
  Integer32 as csBgpNbrGroupExpPolId  
  RowStatus as csBgpNbrGroupExpPolRowStatus  

OSINSAddress  
OSI Network Service Address, e.g. NSAP, Network Entity Title
TEXTUAL-CONVENTION    
  OCTET STRING SIZE(0..20)  

SNPAAddress  
A MAC Address or DTE Address or other SNPA Address.
TEXTUAL-CONVENTION    
  OCTET STRING SIZE(0..20)  

NSAPPrefix  
NSAP Prefix. The first octet of the string is used to encode as an unsigned integer the length in bits of the subsequent prefix. This length must be a multiple of 4 bits and may range from 0..160. The second and subsequent octets are used to hold the prefix value. If the last 4 bits of the last octet are not part of the prefix then their value is undefined.
TEXTUAL-CONVENTION    
  OCTET STRING SIZE(1..21)  

SNPAPrefix  
SNPA Prefix. The first octet of the string is used to encode as an unsigned integer the length in bits of the subsequent prefix. The second and subsequent octets are used to hold the prefix value. Bits in the last octet which are not part of the prefix have undefined value.
TEXTUAL-CONVENTION    
  OCTET STRING SIZE(1..21)  

SystemID  
A system ID.
TEXTUAL-CONVENTION    
  OCTET STRING SIZE(0..8)  

LSPBuffSize  
Integer sub range for LSP size.
TEXTUAL-CONVENTION    
  Integer32 512..1492  

LevelState  
states of the ISIS protocol.
TEXTUAL-CONVENTION    
  INTEGER off(1), on(2), waiting(3)  

SupportedProtocol  
Types of network protocol supported by Integrated ISIS. The values for ISO8473 and IP are those registered for these protocols in ISO TR9577.
TEXTUAL-CONVENTION    
  INTEGER iso8473(129), ip(204), ipV6(205)  

DefaultMetric  
Integer sub-range for default metric for single hop.
TEXTUAL-CONVENTION    
  Integer32 1..63  

OtherMetric  
Integer sub-range for metrics other than the default metric for single hop.
TEXTUAL-CONVENTION    
  Integer32 0..63  

MetricType  
Class of metric at Level 2.
TEXTUAL-CONVENTION    
  INTEGER internal(1), external(2)  

CircuitID  
ID for a circuit.
TEXTUAL-CONVENTION    
  OCTET STRING SIZE(2..9)  

ISPriority  
Integer sub-range for ISIS priority.
TEXTUAL-CONVENTION    
  Integer32 1..127  

TOS  
INTEGER default(1), delay(2), expense(3), error(4)    

PathCost  
INTEGER 0..1023    

CsIsisSysEntry  
SEQUENCE    
  Integer32 as csIsisSysInstance  
  DisplayString as csIsisSysVersion  
  INTEGER as csIsisSysType  
  SystemID as csIsisSysID  
  Integer32 as csIsisSysMaxPathSplits  
  Integer32 as csIsisSysMaxLSPGenInt  
  Integer32 as csIsisSysMaxLSPLifetime  
  LSPBuffSize as csIsisSysOrigL1LSPBuffSize  
  Integer32 as csIsisSysMaxAreaAddresses  
  Integer32 as csIsisSysMinL1LSPGenInt  
  Integer32 as csIsisSysMinL2LSPGenInt  
  Integer32 as csIsisSysPollESHelloRate  
  Integer32 as csIsisSysWaitTime  
  OperState as csIsisSysOperState  
  LevelState as csIsisSysL1State  
  Counter32 as csIsisSysCorrLSPs  
  Counter32 as csIsisSysLSPL1DbaseOloads  
  Counter32 as csIsisSysManAddrDropFromAreas  
  Counter32 as csIsisSysAttmptToExMaxSeqNums  
  Counter32 as csIsisSysSeqNumSkips  
  Counter32 as csIsisSysOwnLSPPurges  
  Counter32 as csIsisSysIDFieldLenMismatches  
  Counter32 as csIsisSysMaxAreaAddrMismatches  
  LSPBuffSize as csIsisSysOrigL2LSPBuffSize  
  LevelState as csIsisSysL2State  
  Counter32 as csIsisSysLSPL2DbaseOloads  
  INTEGER as csIsisSysAuthAreaType  
  OCTET STRING as csIsisSysAuthAreaTransPwd  
  INTEGER as csIsisSysAuthDomainType  
  OCTET STRING as csIsisSysAuthDomainTransPwd  
  Counter32 as csIsisSysAuthFails  
  TruthValue as csIsisSysLSPIgnoreErrors  
  TruthValue as csIsisSysLogAdjacencyChanges  
  Counter32 as csIsisSysPartChanges  
  TruthValue as csIsisSysMaxAreaCheck  
  TestAndIncr as csIsisSysNextCircIndex  
  RowStatus as csIsisSysExistState  
  INTEGER as csIsisSysAdminStatus  
  Integer32 as csIsisSysSPFL1Int  
  Integer32 as csIsisSysSPFL2Int  
  Integer32 as csIsisSysSPFStartInt  
  TruthValue as csIsisSysDefInfoOrig  
  TruthValue as csIsisSysL2TO1Leak  
  Unsigned32 as csIsisSysLogAreaFlag  
  Unsigned32 as csIsisSysLogLevelFlag  

CsIsisManAreaAddrEntry  
SEQUENCE    
  Integer32 as csIsisManAreaAddrSysInstance  
  OSINSAddress as csIsisManAreaAddr  
  RowStatus as csIsisManAreaAddrExistState  

CsIsisAreaAddrEntry  
SEQUENCE    
  Integer32 as csIsisAreaAddrSysInstance  
  OSINSAddress as csIsisAreaAddr  

CsIsisSysProtSuppEntry  
SEQUENCE    
  Integer32 as csIsisSysProtSuppSysInstance  
  SupportedProtocol as csIsisSysProtSuppProtocol  
  RowStatus as csIsisSysProtSuppExistState  

CsIsisL2SummAddrEntry  
SEQUENCE    
  Integer32 as csIsisL2SummAddrSysInstance  
  IpAddress as csIsisL2SummAddress  
  IpAddress as csIsisL2SummAddrMask  
  RowStatus as csIsisL2SummAddrExistState  
  OperState as csIsisL2SummAddrOperState  
  DefaultMetric as csIsisL2SummAddrDefaultMetric  
  OtherMetric as csIsisL2SummAddrDelayMetric  
  OtherMetric as csIsisL2SummAddrExpenseMetric  
  OtherMetric as csIsisL2SummAddrErrorMetric  

CsIsisExpPolEntry  
SEQUENCE    
  Integer32 as csIsisExpPolId  
  RowStatus as csIsisExpPolStatus  

CsIsisCircEntry  
SEQUENCE    
  Integer32 as csIsisCircSysInstance  
  Integer32 as csIsisCircIndex  
  Integer32 as csIsisCircIfIndex  
  Integer32 as csIsisCircIfSubIndex  
  Integer32 as csIsisCircLocalID  
  OperState as csIsisCircOperState  
  RowStatus as csIsisCircExistState  
  INTEGER as csIsisCircType  
  DefaultMetric as csIsisCircL1DefaultMetric  
  OtherMetric as csIsisCircL1DelayMetric  
  OtherMetric as csIsisCircL1ExpenseMetric  
  OtherMetric as csIsisCircL1ErrorMetric  
  TruthValue as csIsisCircExtDomain  
  Counter32 as csIsisCircAdjChanges  
  Counter32 as csIsisCircInitFails  
  Counter32 as csIsisCircRejAdjs  
  Counter32 as csIsisCircOutCtrlPDUs  
  Counter32 as csIsisCircInCtrlPDUs  
  Counter32 as csIsisCircIDFieldLenMismatches  
  DefaultMetric as csIsisCircL2DefaultMetric  
  OtherMetric as csIsisCircL2DelayMetric  
  OtherMetric as csIsisCircL2ExpenseMetric  
  OtherMetric as csIsisCircL2ErrorMetric  
  TruthValue as csIsisCircManL2Only  
  ISPriority as csIsisCircL1ISPriority  
  CircuitID as csIsisCircL1CircID  
  SystemID as csIsisCircL1DesIS  
  Counter32 as csIsisCircLANL1DesISChanges  
  ISPriority as csIsisCircL2ISPriority  
  CircuitID as csIsisCircL2CircID  
  SystemID as csIsisCircL2DesIS  
  Counter32 as csIsisCircLANL2DesISChanges  
  INTEGER as csIsisCircMCAddr  
  CircuitID as csIsisCircPtToPtCircID  
  Integer32 as csIsisCircL1HelloTimer  
  Integer32 as csIsisCircL2HelloTimer  
  Integer32 as csIsisCircL1HelloMultiplier  
  Integer32 as csIsisCircL2HelloMultiplier  
  Integer32 as csIsisCircDRL1HelloTimer  
  Integer32 as csIsisCircDRL2HelloTimer  
  Integer32 as csIsisCircMinBroadLSPTransInt  
  Integer32 as csIsisCircL1MinLSPTransInt  
  Integer32 as csIsisCircL2MinLSPTransInt  
  Integer32 as csIsisCircL1CSNPInterval  
  Integer32 as csIsisCircL2CSNPInterval  
  Integer32 as csIsisCircL1PartSNPInterval  
  Integer32 as csIsisCircL2PartSNPInterval  
  Integer32 as csIsisCircLSPThrottle  
  TruthValue as csIsisCircPassiveCircuit  
  INTEGER as csIsisCircMeshGroupEnabled  
  Integer32 as csIsisCircMeshGroup  
  INTEGER as csIsisCircL1AuthType  
  OCTET STRING as csIsisCircL1Password  
  INTEGER as csIsisCircL2AuthType  
  OCTET STRING as csIsisCircL2Password  
  OperState as csIsisCircSmallHellos  
  OSINSAddress as csIsisManAdjNeighNSAP  
  SNPAAddress as csIsisManAdjNeighSNPA  
  TruthValue as csIsisCircIPEncaps  
  Integer32 as csIsisCircUpTime  
  IpAddress as csIsisCircIpAddress  
  INTEGER as csIsisCircLevel  

CsIsisISAdjEntry  
SEQUENCE    
  Integer32 as csIsisISAdjSysInstance  
  Integer32 as csIsisISAdjCircIndex  
  Integer32 as csIsisISAdjIndex  
  INTEGER as csIsisISAdjState  
  SNPAAddress as csIsisISAdjNeighSNPAAddress  
  INTEGER as csIsisISAdjNeighSysType  
  OCTET STRING as csIsisISAdjNeighSysID  
  INTEGER as csIsisISAdjUsage  
  Integer32 as csIsisISAdjHoldTimer  
  ISPriority as csIsisISAdjNeighPriority  
  Integer32 as csIsisISAdjUpTime  

CsIsisISAdjAreaAddrEntry  
SEQUENCE    
  Integer32 as csIsisISAdjAreaAddrSysInstance  
  Integer32 as csIsisISAdjAreaAddrCircIndex  
  Integer32 as csIsisISAdjAreaAddrAdjIndex  
  OSINSAddress as csIsisISAdjAreaAddress  

CsIsisISAdjIPAddrEntry  
SEQUENCE    
  Integer32 as csIsisISAdjIPAddrSysInstance  
  Integer32 as csIsisISAdjIPAddrCircIndex  
  Integer32 as csIsisISAdjIPAddrAdjIndex  
  IpAddress as csIsisISAdjIPAddress  

CsIsisISAdjProtSuppEntry  
SEQUENCE    
  Integer32 as csIsisISAdjProtSuppSysInstance  
  Integer32 as csIsisISAdjProtSuppCircIndex  
  Integer32 as csIsisISAdjProtSuppAdjIndex  
  SupportedProtocol as csIsisISAdjProtSuppProtocol  

CsIsisIPRAEntry  
SEQUENCE    
  Integer32 as csIsisIPRASysInstance  
  Integer32 as csIsisIPRACircIndex  
  Integer32 as csIsisIPRAIndex  
  INTEGER as csIsisIPRAType  
  IpAddress as csIsisIPRADest  
  IpAddress as csIsisIPRAMask  
  RowStatus as csIsisIPRAExistState  
  OperState as csIsisIPRAOperState  
  DefaultMetric as csIsisIPRADefMetric  
  OtherMetric as csIsisIPRADelMetric  
  OtherMetric as csIsisIPRAExpMetric  
  OtherMetric as csIsisIPRAErrMetric  
  MetricType as csIsisIPRADefMetricType  
  MetricType as csIsisIPRADelMetricType  
  MetricType as csIsisIPRAExpMetricType  
  MetricType as csIsisIPRAErrMetricType  
  SNPAAddress as csIsisIPRASNPAAddress  

CsRsvpSessionEntry  
SEQUENCE    
  IpAddress as csRsvpSessionTunnelEndpoint  
  INTEGER as csRsvpSessionTunnelID  
  Unsigned32 as csRsvpSessionExtendedTunnelID  
  Gauge32 as csRsvpSessionUpPsbs  
  Gauge32 as csRsvpSessionDownPsbs  
  Gauge32 as csRsvpSessionUpRsbs  
  Gauge32 as csRsvpSessionDownRsbs  

CsRsvpIfEntry  
SEQUENCE    
  Integer32 as csRsvpIfMaxBandwidth  
  Integer32 as csRsvpIfMaxFlowBandwidth  
  Gauge32 as csRsvpIfUdpNbrs  
  Gauge32 as csRsvpIfIpNbrs  
  Gauge32 as csRsvpIfNbrs  
  TruthValue as csRsvpIfEnabled  
  TruthValue as csRsvpIfUdpRequired  
  INTEGER as csRsvpIfRefreshBlockadeMultiple  
  INTEGER as csRsvpIfRefreshMultiple  
  INTEGER as csRsvpIfTTL  
  TimeInterval as csRsvpIfRefreshInterval  
  TimeInterval as csRsvpIfRouteDelay  
  RowStatus as csRsvpIfStatus  
  Counter32 as csRsvpIfPktsIn  
  Counter32 as csRsvpIfPathIn  
  Counter32 as csRsvpIfResvIn  
  Counter32 as csRsvpIfPathTearIn  
  Counter32 as csRsvpIfPathErrIn  
  Counter32 as csRsvpIfResvTearIn  
  Counter32 as csRsvpIfResvErrIn  
  Counter32 as csRsvpIfResvConfIn  
  Counter32 as csRsvpIfPathOut  
  Counter32 as csRsvpIfResvOut  
  Counter32 as csRsvpIfPathTearOut  
  Counter32 as csRsvpIfPathErrOut  
  Counter32 as csRsvpIfResvTearOut  
  Counter32 as csRsvpIfResvErrOut  
  Counter32 as csRsvpIfResvConfOut  
  Counter32 as csRsvpIfBadPathIn  
  Counter32 as csRsvpIfBadResvIn  
  Counter32 as csRsvpIfBadPathTearIn  
  Counter32 as csRsvpIfBadResvTearIn  
  Counter32 as csRsvpIfBadPathErrIn  
  Counter32 as csRsvpIfBadResvErrIn  
  Counter32 as csRsvpIfBadResvConfIn  
  Counter32 as csRsvpIfBadOtherIn  
  Counter32 as csRsvpIfUpPsbsCreated  
  Counter32 as csRsvpIfDownPsbsCreated  
  Counter32 as csRsvpIfUpRsbsCreated  
  Counter32 as csRsvpIfDownRsbsCreated  
  Counter32 as csRsvpIfIngressLspsCreated  
  Counter32 as csRsvpIfEgressLspsCreated  
  IpAddress as csRsvpIfIpAddress  
  INTEGER as csRsvpIfRRCapable  
  INTEGER as csRsvpIfAckDesired  
  Integer32 as csRsvpIfHelloInterval  

CsRsvpVrConfEntry  
SEQUENCE    
  INTEGER as csRsvpVrAdminStatus  
  Integer32 as csRsvpVrEventLogLevel  
  Integer32 as csRsvpVrEventLogArea  
  Integer32 as csRsvpVrConfOpCode  
  RowStatus as csRsvpVrConfRowStatus  

CsRsvpIfQueueEntry  
SEQUENCE    
  INTEGER as csRsvpIfQueueID  
  Integer32 as csRsvpIfQueueBandwidth  
  RowStatus as csRsvpIfQueueRowStatus  
  Integer32 as csRsvpIfQueueOperBandwidth  

CsMplsLspEntry  
SEQUENCE    
  Integer32 as csMplsLspID  
  DisplayString as csMplsLspName  
  INTEGER as csMplsLspState  
  Counter32 as csMplsLspOctets  
  Counter32 as csMplsLspPackets  
  TimeStamp as csMplsLspAge  
  TimeStamp as csMplsLspTimeUp  
  TimeStamp as csMplsLspPrimaryTimeUp  
  Counter32 as csMplsLspTransitions  
  TimeStamp as csMplsLspLastTransition  
  Counter32 as csMplsLspPathChanges  
  TimeStamp as csMplsLspLastPathChange  
  Integer32 as csMplsLspConfiguredPaths  
  Integer32 as csMplsLspStandbyPaths  
  Integer32 as csMplsLspOperationalPaths  
  IpAddress as csMplsLspFrom  
  IpAddress as csMplsLspTo  
  DisplayString as csMplsPathName  
  INTEGER as csMplsPathType  
  Integer32 as csMplsPathBandwidth  
  INTEGER as csMplsPathCOS 0..7 | 255  
  Integer32 as csMplsPathInclude  
  Integer32 as csMplsPathExclude  
  INTEGER as csMplsPathSetupPriority 0..7  
  INTEGER as csMplsPathHoldPriority 0..7  
  INTEGER as csMplsPathRecordRoute  
  INTEGER as csMplsPathDynamic  
  Integer32 as csMplsPathIdentifier  
  INTEGER as csMplsPathBgpAutoRouteAnnounce  
  INTEGER as csMplsPathMetricMode  
  Integer32 as csMplsPathMetricValue  
  Integer32 as csMplsPathAffinity  
  Integer32 as csMplsPathAffinityMask  
  Integer32 as csMplsLspPreference  
  RowStatus as csMplsLspRowStatus  
  INTEGER as csMplsPathIsisAutoRouteAnnounce  
  INTEGER as csMplsPathOspfAutoRouteAnnounce  
  OCTET STRING as csMplsVrPathRecordRoute SIZE(0..1024)  
  INTEGER as csMplsLspOperationStatus  
  INTEGER as csMplsPathExpValue  
  INTEGER as csMplsPathCosValue  
  INTEGER as csMplsPathDropPrecedence  
  INTEGER as csMplsPathHotStandby  
  INTEGER as csMplsPathVpnAutoRouteAnnounce  
  INTEGER as csMplsPathPwe3AutoRouteAnnounce  

CsMplsInterfaceConfEntry  
SEQUENCE    
  TruthValue as csMplsInterfaceUseInterfaceLabels  
  INTEGER as csMplsInterfaceLabelRange  
  MplsLabel as csMplsInterfaceLabelMinIn  
  MplsLabel as csMplsInterfaceLabelMaxIn  
  MplsLabel as csMplsInterfaceLabelMinOut  
  MplsLabel as csMplsInterfaceLabelMaxOut  
  INTEGER as csMplsInterfaceAdminStatus  
  INTEGER as csMplsInterfaceOperStatus  
  Integer32 as csMplsInterfaceAdminWeight  
  Integer32 as csMplsInterfaceAttribFlags  
  RowStatus as csMplsInterfaceRowStatus  

CsMplsVrConfEntry  
SEQUENCE    
  INTEGER as csMplsVrAdminStatus  
  Integer32 as csMplsVrEventLogLevel  
  Integer32 as csMplsVrEventLogArea  
  Integer32 as csMplsVrConfOpCode  
  RowStatus as csMplsVrConfRowStatus  

CsMplsExtensionsEntry  
SEQUENCE    
  INTEGER as csMplsMetricStyle  
  RowStatus as csMplsExtensionsRowStatus  
  INTEGER as csMplsOspfOpaqueAdminStatus  

CsMplsVrPathConfEntry  
SEQUENCE    
  DisplayString as csMplsVrPathName  
  OCTET STRING as csMplsVrPathExplicitRoute SIZE(0..1024)  
  Integer32 as csMplsVrPathIdentifier  
  RowStatus as csMplsVrPathConfRowStatus  

CsMplsIsisExtensionsEntry  
SEQUENCE    
  INTEGER as csMplsTrafficEnggLevel  
  INTEGER as csMplsTrafficEnggAdminStatus  
  RowStatus as csMplsIsisExtensionsRowStatus  

CsMplsOspfExtensionsEntry  
SEQUENCE    
  AreaID as csMplsOspfAreaId  
  INTEGER as csMplsOspfAreaAdminStatus  
  RowStatus as csMplsOspfExtensionsRowStatus  

CsLdpVrConfEntry  
SEQUENCE    
  RowStatus as csLdpVrConfRowStatus  
  INTEGER as csLdpVrAdminStatus  
  INTEGER as csLdpVrEventLogLevel  
  Unsigned32 as csLdpVrEventLogArea  
  Unsigned32 as csLdpVrEventLogAreaMask  
  Integer32 as csLdpVrRoutePreference  
  INTEGER as csLdpVrAutorouteAnnounce  
  INTEGER as csLdpVrVpnAutorouteAnnounce  
  INTEGER as csLdpVrPwe3AutorouteAnnounce  
  INTEGER as csLdpVrAcceptTargetedHellos  

CsLdpEntityEntry  
SEQUENCE    
  Unsigned32 as csLdpEntityIndex  
  RowStatus as csLdpEntityRowStatus  
  INTEGER as csLdpEntityAdminStatus  
  Integer32 as csLdpEntityHelloTimer  
  Integer32 as csLdpEntityHelloHoldTimer  
  Integer32 as csLdpEntityKeepAliveTimer  
  Integer32 as csLdpEntityKeepAliveHoldTimer  
  IpAddress as csLdpEntityTransportAddr  

CsLdpTargetEntry  
SEQUENCE    
  IpAddress as csLdpTargetPeerIpAddr  
  RowStatus as csLdpTargetRowStatus  
  INTEGER as csLdpTargetAdminStatus  
  Integer32 as csLdpTargetHelloTimer  
  Integer32 as csLdpTargetHelloHoldTimer  
  Integer32 as csLdpTargetKeepAliveTimer  
  Integer32 as csLdpTargetKeepAliveHoldTimer  
  TruthValue as csLdpTargetActive  

CsVpnVrfEntry  
SEQUENCE    
  DisplayString as csVpnVrfName  
  DisplayString as csVpnVrfDescription  
  DisplayString as csVpnVrfProviderName  
  OCTET STRING as csVpnVrfRouteDistinguisher  
  INTEGER as csVpnVrfAdminStatus  
  Unsigned32 as csVpnVrfLogAreaFlag  
  INTEGER as csVpnVrfLogLevelFlag  
  Integer32 as csVpnVrfPreference  
  RowStatus as csVpnVrfRowStatus  
  OCTET STRING as csVpnVrfSiteOfOrigin  
  Integer32 as csVpnVrfAllowASIn  
  TruthValue as csVpnVrfASOverride  
  Integer32 as csVpnVrfMaxRoutes  
  INTEGER as csVpnVrfMaxRoutesExceedAction  

CsVpnVrfRouteTargetEntry  
SEQUENCE    
  INTEGER as csVpnVrfRouteTargetType  
  OCTET STRING as csVpnVrfRouteTargetValue  
  RowStatus as csVpnVrfRouteTargetRowStatus  

CsOrionViPbfFilterEntry  
SEQUENCE    
  Integer32 as csOrionViPbfFilterIndex  
  Integer32 as csOrionViPbfFilterAclId  
  Integer32 as csOrionViPbfFilterEgressViId  
  IpAddress as csOrionViPbfFilterNextHopIpAddr  
  INTEGER as csOrionViPbfFilterAction  
  RowStatus as csOrionViPbfFilterRowStatus  
  INTEGER as csOrionViPbfFilterCounter  

CsIgmpInterfaceEntry  
SEQUENCE    
  InterfaceIndex as csIgmpInterfaceIfIndex  
  Unsigned32 as csIgmpInterfaceQueryInterval  
  RowStatus as csIgmpInterfaceStatus  
  Unsigned32 as csIgmpInterfaceVersion  
  IpAddress as csIgmpInterfaceQuerier  
  Unsigned32 as csIgmpInterfaceQueryMaxResponseTime  
  TimeTicks as csIgmpInterfaceQuerierUpTime  
  TimeTicks as csIgmpInterfaceQuerierExpiryTime  
  TimeTicks as csIgmpInterfaceVersion1QuerierTimer  
  Counter32 as csIgmpInterfaceWrongVersionQueries  
  Counter32 as csIgmpInterfaceJoins  
  InterfaceIndexOrZero as csIgmpInterfaceProxyIfIndex  
  Gauge32 as csIgmpInterfaceGroups  
  Unsigned32 as csIgmpInterfaceRobustness  
  Unsigned32 as csIgmpInterfaceLastMembQueryIntvl  
  Unsigned32 as csIgmpInterfaceMulticastTTLThreshold  
  INTEGER as csIgmpInterfaceAdminStatus  

CsIgmpCacheEntry  
SEQUENCE    
  IpAddress as csIgmpCacheAddress  
  InterfaceIndex as csIgmpCacheIfIndex  
  TruthValue as csIgmpCacheSelf  
  IpAddress as csIgmpCacheLastReporter  
  TimeTicks as csIgmpCacheUpTime  
  TimeTicks as csIgmpCacheExpiryTime  
  RowStatus as csIgmpCacheStatus  
  TimeTicks as csIgmpCacheVersion1HostTimer  

CsIgmpStaticGroupEntry  
SEQUENCE    
  InterfaceIndex as csIgmpStaticGroupIfIndex  
  IpAddress as csIgmpStaticGroupAddress  
  RowStatus as csIgmpStaticGroupStatus  

CsIgmpAccessGroupEntry  
SEQUENCE    
  InterfaceIndex as csIgmpAccessGroupIfIndex  
  IpAddress as csIgmpAccessGroupAddress  
  RowStatus as csIgmpAccessGroupStatus  

CsIgmpGeneralEntry  
SEQUENCE    
  RowStatus as csIgmpGeneralEntryRowStatus  

CsPwVcEntry  
SEQUENCE    
  PwVcIndex as csPwVcIndex  
  PwVcID as csPwVcID  
  PwGroupID as csPwVcOutboundGroupID  
  PwGroupID as csPwVcInboundGroupID  
  Unsigned32 as csPwVcInboundMTU  
  INTEGER as csPwVcPeerAddrType  
  IpAddress as csPwVcPeerIpv4Addr  
  IpAddress as csPwVcPeerIpv6Addr  
  Unsigned32 as csPwVcOutboundVcLabel  
  Unsigned32 as csPwVcInboundVcLabel  
  INTEGER as csPwVcInboundMode  
  SnmpAdminString as csPwVcName  
  SnmpAdminString as csPwVcDescr  
  TimeStamp as csPwVcCreateTime  
  TimeTicks as csPwVcUpTime  
  INTEGER as csPwVcType  
  INTEGER as csPwVcOwner  
  INTEGER as csPwVcPsnType  
  Unsigned32 as csPwVcPriority  
  INTEGER as csPwVcAdminStatus  
  INTEGER as csPwVcOperStatus  
  INTEGER as csPwVcInboundOperStatus  
  INTEGER as csPwVcOutboundOperStatus  
  RowStatus as csPwVcRowStatus  
  StorageType as csPwVcStorageType  
  DisplayString as csPwVcCeIntf  
  Unsigned32 as csPwVcForwardSlot  
  Unsigned32 as csPwVcForwardPE  
  TruthValue as csPwVcCtrlWord  
  TruthValue as csPwVcSeqNumber  
  INTEGER as csPwVcTestResult  
  Unsigned32 as csPwVcVlanId  
  Unsigned32 as csPwVcCustomerId  
  SnmpAdminString as csPwVcCustomerName  

CsPwe3ConfEntry  
SEQUENCE    
  INTEGER as csPwe3EventLogLevel  
  Integer32 as csPwe3EventLogArea  
  RowStatus as csPwe3ConfRowStatus  

CsOrionBladeEntry  
SEQUENCE    
  Integer32 as csOrionBladeSlotLocation  
  DisplayString as csOrionBladeDescr  
  INTEGER as csOrionBladeType  
  INTEGER as csOrionBladeState  
  Integer32 as csOrionBladeEnginesNumb  
  Integer32 as csOrionBladePortNumb  
  DisplayString as csOrionBladeSerialNumb  
  DisplayString as csOrionBladeHwVer  
  DisplayString as csOrionBladeSwVer  
  INTEGER as csOrionBladeReset  
  OCTET STRING as csOrionBladeConfigAttributes  
  OCTET STRING as csOrionBladeOperAttributes  
  DisplayString as csOrionBladeModelNumb  
  DisplayString as csOrionBladeCLEICode  
  DisplayString as csOrionBladeFPGAVersion  
  MacAddress as csOrionBladePort1MacAddr  
  MacAddress as csOrionBladePort2MacAddr  
  MacAddress as csOrionBladePort3MacAddr  
  MacAddress as csOrionBladePort4MacAddr  
  DisplayString as csOrionBladeIPSXLoaderProduct  
  DisplayString as csOrionBladeIPSXLoaderVersion  
  DisplayString as csOrionBladeIPSXLoaderDate  
  DisplayString as csOrionBladeIPSXLoaderTime  
  DisplayString as csOrionBladeTemperatureSensor1  
  DisplayString as csOrionBladeTemperatureSensor2  
  DisplayString as csOrionBladeTemperatureSensor3  
  DisplayString as csOrionBladeTemperatureSensor4  
  INTEGER as csOrionBladeShutdown  
  Integer32 as csOrionBladeNumSharcCrypto  
  Integer32 as csOrionBladeSharcCryptoModuleId1  
  Integer32 as csOrionBladeSharcCryptoModuleId2  
  INTEGER as csOrionBladeSharcCryptoType1  
  INTEGER as csOrionBladeSharcCryptoType2  
  DisplayString as csOrionBladeSharcCryptoSerial1  
  DisplayString as csOrionBladeSharcCryptoSerial2  
  DisplayString as csOrionBladeSharcCryptoAssembly1  
  DisplayString as csOrionBladeSharcCryptoAssembly2  

CsOrionEngineEntry  
SEQUENCE    
  Integer32 as csOrionEngineIndex  
  Integer32 as csOrionEngineMemorySize  
  Integer32 as csOrionEngineMemoryUtil  
  INTEGER as csOrionEngineType  
  DisplayString as csOrionEngineDescr  
  Integer32 as csOrionEngineUtilization  
  Integer32 as csOrionEngineTemperature  
  INTEGER as csOrionEngineState  
  OCTET STRING as csOrionEngineConfigAttributes  
  OCTET STRING as csOrionEngineOperAttributes  
  DisplayString as csOrionEngineLoaderProduct  
  DisplayString as csOrionEngineLoaderVersion  
  DisplayString as csOrionEngineLoaderDate  
  DisplayString as csOrionEngineLoaderTime  
  DisplayString as csOrionEngineApplicationProduct  
  DisplayString as csOrionEngineApplicationVersion  
  DisplayString as csOrionEngineApplicationDate  
  DisplayString as csOrionEngineApplicationTime  
  DisplayString as csOrionEngineSerialNumb  
  DisplayString as csOrionEngineAssemblyNumb  
  INTEGER as csOrionEngineCpuType  
  Integer32 as csOrionEngineCpuVersion  
  Gauge32 as csOrionEngineDataCacheSize  
  Gauge32 as csOrionEngineInstructionCacheSize  
  Gauge32 as csOrionEngineSecondaryCacheSize  
  Gauge32 as csOrionEngineLevel3CacheSize  
  Gauge32 as csOrionEngineMemoryAllocs  
  Gauge32 as csOrionEngineMemoryAllocFailures  
  Gauge32 as csOrionEngineMemoryFrees  
  Gauge32 as csOrionEngineMemoryBadFrees  
  Gauge32 as csOrionEngineMemoryBytesAllocs  
  Gauge32 as csOrionEngineMemoryBytesFreed  
  Gauge32 as csOrionEngineFreeMemory  
  Gauge32 as csOrionEngineLargestFreeMemory  
  Gauge32 as csOrionEngineFreeMemoryMedium  
  Gauge32 as csOrionEngineFreeMemoryLong  
  Integer32 as csOrionEngineUtilizationMedium  
  Integer32 as csOrionEngineUtilizationLong  
  Integer32 as csOrionEngineForwardingMode  
  Integer32 as csOrionEngineOsVersion  

CsOrionQueueGroupEntry  
SEQUENCE    
  INTEGER as csOrionQueueGroupType  
  Integer32 as csOrionQueueGroupId  
  Integer32 as csOrionQueueGroupPriorityIndex  
  OCTET STRING as csOrionQueueGroupSubGroupAllocation  
  OperStatus as csOrionQueueGroupOperStatus  

CsOrionQueueEntry  
SEQUENCE    
  Integer32 as csOrionQueueId  
  INTEGER as csOrionQueueClassOfService  
  Integer32 as csOrionQueueWeight  
  INTEGER as csOrionQueueMinThresholdForRed  
  INTEGER as csOrionQueueMinThresholdForYellow  
  INTEGER as csOrionQueueMinThresholdForGreen  
  INTEGER as csOrionQueueMaxRandomForRed  
  INTEGER as csOrionQueueMaxRandomForYellow  
  INTEGER as csOrionQueueMaxRandomForGreen  
  INTEGER as csOrionQueueMaxThreshold  
  Counter32 as csOrionQueueTotalByteCount  
  Counter32 as csOrionQueuePacketCount  
  Counter32 as csOrionQueueAverageSize  

CsOrionAccessListEntry  
SEQUENCE    
  Integer32 as csOrionAccessListId  
  IpAddress as csOrionAccessListStartAddress  
  IpAddress as csOrionAccessListEndAddress  
  Integer32 as csOrionAccessListPoolId  
  RowStatus as csOrionAccessListStatus  

CsOrionGenAclEntry  
SEQUENCE    
  Integer32 as csOrionGenAclId  
  IpAddress as csOrionGenAclSrcAddress  
  IpAddress as csOrionGenAclSrcMask  
  IpAddress as csOrionGenAclDstAddress  
  IpAddress as csOrionGenAclDstMask  
  Integer32 as csOrionGenAclProt  
  Integer32 as csOrionGenAclTos  
  Integer32 as csOrionGenAclStartSrcPort  
  Integer32 as csOrionGenAclEndSrcPort  
  Integer32 as csOrionGenAclStartDstPort  
  Integer32 as csOrionGenAclEndDstPort  
  RowStatus as csOrionGenAclStatus  
  DisplayString as csOrionGenAclSrcAddressList  
  DisplayString as csOrionGenAclDstAddressList  
  DisplayString as csOrionGenAclSrcPortList  
  DisplayString as csOrionGenAclDstPortList  

CsOrionAddressListEntry  
SEQUENCE    
  DisplayString as csOrionAddressListName  
  IpAddress as csOrionAddressListIpAddress  
  IpAddress as csOrionAddressListMask  
  RowStatus as csOrionAddressListRowStatus  

CsOrionNumericListEntry  
SEQUENCE    
  INTEGER as csOrionNumericListType  
  DisplayString as csOrionNumericListName  
  Integer32 as csOrionNumericListValue  
  Integer32 as csOrionNumericListUpperLimit  
  RowStatus as csOrionNumericListRowStatus  

CsOrionFwInsideIfEntry  
SEQUENCE    
  Integer32 as csOrionFwInsideIfIf  
  IpAddress as csOrionFwInsideIfAddr  
  IpAddress as csOrionFwInsideIfMask  
  RowStatus as csOrionFwInsideIfRowStatus  

CsOrionFwDmzIfEntry  
SEQUENCE    
  Integer32 as csOrionFwDmzIf  
  IpAddress as csOrionFwDmzIfAddr  
  IpAddress as csOrionFwDmzIfMask  
  RowStatus as csOrionFwDmzIfRowStatus  

CsOrionFwNwGroupEntry  
SEQUENCE    
  DisplayString as csOrionFwNwGroupName  
  IpAddress as csOrionFwNwGroupAddr  
  IpAddress as csOrionFwNwGroupMask  
  INTEGER as csOrionFwNwGroupInterface  
  RowStatus as csOrionFwNwGroupRowStatus  

CsOrionFwEvLogEntry  
SEQUENCE    
  EvLogLevel as csOrionFwEvLogLevel  

CsOrionFwGenCfgEntry  
SEQUENCE    
  INTEGER as csOrionFwAccCfgFlag  

CsOrionFwGenProxyEntry  
SEQUENCE    
  INTEGER as csOrionFwGenProxyId  
  Integer32 as csOrionFwGenProxyChildLimit  
  INTEGER as csOrionFwGenProxyStatus  
  Integer32 as csOrionFwGenProxyActiveSessions  

CsOrionFwDestEntry  
SEQUENCE    
  INTEGER as csOrionFwDestProxy  
  Integer32 as csOrionFwDestIndex  
  INTEGER as csOrionFwDestAccess  
  IpAddress as csOrionFwDestAddr  
  IpAddress as csOrionFwDestMask  
  RowStatus as csOrionFwDestRowStatus  

CsOrionFwHostEntry  
SEQUENCE    
  INTEGER as csOrionFwHostProxy  
  Integer32 as csOrionFwHostIndex  
  INTEGER as csOrionFwHostAccess  
  IpAddress as csOrionFwHostAddr  
  IpAddress as csOrionFwHostMask  
  RowStatus as csOrionFwHostRowStatus  

CsOrionFwAccessEntry  
SEQUENCE    
  Integer32 as csOrionFwAccessPriority  
  IpAddress as csOrionFwAccessSourceAddr  
  IpAddress as csOrionFwAccessSourceMask  
  IpAddress as csOrionFwAccessDestAddr  
  IpAddress as csOrionFwAccessDestMask  
  INTEGER as csOrionFwAccessAction  
  Integer32 as csOrionFwAccessPortNumber  
  DisplayString as csOrionFwAccessPolicy  
  RowStatus as csOrionFwAccessRowStatus  
  DisplayString as csOrionFwAccessSourceAddrList  
  DisplayString as csOrionFwAccessDestAddrList  
  DisplayString as csOrionFwAccessDestPortList  

CsOrionFwProxyDaemonEntry  
SEQUENCE    
  Integer32 as csOrionFwProxyDaemonPortNumber  
  INTEGER as csOrionFwProxyDaemonProtocol  
  RowStatus as csOrionFwProxyDaemonRowStatus  

CsOrionFwFtpConfigEntry  
SEQUENCE    
  Unsigned32 as csOrionFwFtpLog  
  Unsigned32 as csOrionFwFtpFunctionIds  

CsOrionFwFtpPolicyEntry  
SEQUENCE    
  DisplayString as csOrionFwFtpPolicyName  
  INTEGER as csOrionFwFtpPolicyAuthenticate  
  Integer32 as csOrionFwFtpPolicyTimeout  
  DisplayString as csOrionFwFtpPolicyHandoffAddr  
  OCTET STRING as csOrionFwFtpPolicyLog  
  OCTET STRING as csOrionFwFtpPolicyFunctionIds  
  INTEGER as csOrionFwFtpPolicyDynamicPacketFilter  
  RowStatus as csOrionFwFtpPolicyRowStatus  

CsOrionFwFtpAuthEntry  
SEQUENCE    
  INTEGER as csOrionFwFtpAuthStatus  
  INTEGER as csOrionFwFtpAuthServiceType  
  INTEGER as csOrionFwFtpAuthMechanism  
  DisplayString as csOrionFwFtpAuthServers  
  INTEGER as csOrionFwFtpAuthNonTransparentAuth  
  Integer32 as csOrionFwFtpAuthPasswdTimeout  
  DisplayString as csOrionFwFtpAuthPerUserAuthFilter  

CsOrionFwHttpConfigEntry  
SEQUENCE    
  Unsigned32 as csOrionFwHttpLog  
  DisplayString as csOrionFwHttpOurname  
  Unsigned32 as csOrionFwHttpFeatureIds  
  Unsigned32 as csOrionFwHttpFunctionIds  
  Unsigned32 as csOrionFwHttpHeaderIds  

CsOrionFwHttpPolicyEntry  
SEQUENCE    
  DisplayString as csOrionFwHttpPolicyName  
  INTEGER as csOrionFwHttpPolicyAuthenticate  
  Integer32 as csOrionFwHttpPolicyTimeout  
  DisplayString as csOrionFwHttpPolicyHandoffAddr  
  DisplayString as csOrionFwHttpPolicyOurname  
  OCTET STRING as csOrionFwHttpPolicyLog  
  OCTET STRING as csOrionFwHttpPolicyFunctionIds  
  OCTET STRING as csOrionFwHttpPolicyFeatures  
  OCTET STRING as csOrionFwHttpPolicyHeader  
  RowStatus as csOrionFwHttpPolicyRowStatus  

CsOrionFwHttpPortEntry  
SEQUENCE    
  DisplayString as csOrionFwHttpPortPolicyName  
  Integer32 as csOrionFwHttpPortNumber  
  INTEGER as csOrionFwHttpPortAccess  
  RowStatus as csOrionFwHttpPortRowStatus  

CsOrionFwHttpAuthEntry  
SEQUENCE    
  INTEGER as csOrionFwHttpAuthStatus  
  INTEGER as csOrionFwHttpAuthServiceType  
  INTEGER as csOrionFwHttpAuthMechanism  
  DisplayString as csOrionFwHttpAuthServers  
  INTEGER as csOrionFwHttpAuthNonTransparentAuth  
  Integer32 as csOrionFwHttpAuthPasswdTimeout  
  DisplayString as csOrionFwHttpAuthPerUserAuthFilter  

CsOrionFwSmtpConfigEntry  
SEQUENCE    
  DisplayString as csOrionFwSmtpBadAdmin  
  DisplayString as csOrionFwSmtpBadDir  
  Integer32 as csOrionFwSmtpMaxChildren  
  Integer32 as csOrionFwSmtpWakeup  
  DisplayString as csOrionFwSmtpInternalMailHub  
  DisplayString as csOrionFwSmtpLocalDomain  
  INTEGER as csOrionFwSmtpLogging  
  INTEGER as csOrionFwSmtpLogRelay  
  INTEGER as csOrionFwSmtpLogSpam  
  Integer32 as csOrionFwSmtpMaxBytes  
  Integer32 as csOrionFwSmtpMaxRecip  
  Integer32 as csOrionFwSmtpSpamReply  
  Integer32 as csOrionFwSmtpRelayReply  

CsOrionFwSmtpPolicyEntry  
SEQUENCE    
  DisplayString as csOrionFwSmtpPolicyName  
  Integer32 as csOrionFwSmtpPolicyTimeout  
  DisplayString as csOrionFwSmtpPolicyInternalMailHub  
  DisplayString as csOrionFwSmtpPolicyBadEmailAdmin  
  DisplayString as csOrionFwSmtpPolicyLocalDomain  
  Integer32 as csOrionFwSmtpPolicyMaxBytes  
  Integer32 as csOrionFwSmtpPolicyMaxRecipients  
  INTEGER as csOrionFwSmtpPolicyLogging  
  INTEGER as csOrionFwSmtpPolicyLogRelay  
  INTEGER as csOrionFwSmtpPolicyRelayReply  
  INTEGER as csOrionFwSmtpPolicyLogSpam  
  INTEGER as csOrionFwSmtpPolicySpamReply  
  RowStatus as csOrionFwSmtpPolicyRowStatus  
  INTEGER as csOrionFwSmtpPolicyMimeCheck  

CsOrionFwSmtpRelayEntry  
SEQUENCE    
  DisplayString as csOrionFwSmtpRelayPolicyName  
  DisplayString as csOrionFwSmtpRelaySource  
  INTEGER as csOrionFwSmtpRelayAccess  
  RowStatus as csOrionFwSmtpRelayRowStatus  

CsOrionFwSmtpSpamEntry  
SEQUENCE    
  DisplayString as csOrionFwSmtpSpamPolicyName  
  DisplayString as csOrionFwSmtpSpamSource  
  INTEGER as csOrionFwSmtpSpamAccess  
  RowStatus as csOrionFwSmtpSpamRowStatus  

CsOrionFwTelnetPolicyEntry  
SEQUENCE    
  DisplayString as csOrionFwTelnetPolicyName  
  INTEGER as csOrionFwTelnetPolicyAuthenticate  
  Integer32 as csOrionFwTelnetPolicyTimeout  
  INTEGER as csOrionFwTelnetPolicyPasswordChange  
  DisplayString as csOrionFwTelnetPolicyPrompt  
  INTEGER as csOrionFwTelnetPolicyXGateway  
  RowStatus as csOrionFwTelnetPolicyRowStatus  

CsOrionFwTelnetAuthEntry  
SEQUENCE    
  INTEGER as csOrionFwTelnetAuthStatus  
  INTEGER as csOrionFwTelnetAuthServiceType  
  INTEGER as csOrionFwTelnetAuthMechanism  
  DisplayString as csOrionFwTelnetAuthServers  
  INTEGER as csOrionFwTelnetAuthNonTransparentAuth  
  Integer32 as csOrionFwTelnetAuthPasswdTimeout  
  DisplayString as csOrionFwTelnetAuthPerUserAuthFilter  

CsOrionFwPop3PolicyEntry  
SEQUENCE    
  DisplayString as csOrionFwPop3PolicyName  
  INTEGER as csOrionFwPop3PolicyAuthenticate  
  Integer32 as csOrionFwPop3PolicyTimeout  
  DisplayString as csOrionFwPop3PolicyPopServer  
  RowStatus as csOrionFwPop3PolicyRowStatus  

CsOrionFwPlugPolicyEntry  
SEQUENCE    
  DisplayString as csOrionFwPlugPolicyName  
  INTEGER as csOrionFwPlugPolicyAuthenticate  
  Integer32 as csOrionFwPlugPolicyTimeout  
  DisplayString as csOrionFwPlugPolicyRemoteServer  
  Integer32 as csOrionFwPlugPolicyRemotePort  
  RowStatus as csOrionFwPlugPolicyRowStatus  

CsOrionFwNntpPolicyEntry  
SEQUENCE    
  DisplayString as csOrionFwNntpPolicyName  
  INTEGER as csOrionFwNntpPolicyAuthenticate  
  Integer32 as csOrionFwNntpPolicyTimeout  
  DisplayString as csOrionFwNntpPolicyRemoteServer  
  Integer32 as csOrionFwNntpPolicyRemotePort  
  RowStatus as csOrionFwNntpPolicyRowStatus  

CsOrionFwLdapPolicyEntry  
SEQUENCE    
  DisplayString as csOrionFwLdapPolicyName  
  INTEGER as csOrionFwLdapPolicyAuthenticate  
  Integer32 as csOrionFwLdapPolicyTimeout  
  DisplayString as csOrionFwLdapPolicyRemoteServer  
  Integer32 as csOrionFwLdapPolicyRemotePort  
  RowStatus as csOrionFwLdapPolicyRowStatus  

CsOrionFwLnotesPolicyEntry  
SEQUENCE    
  DisplayString as csOrionFwLnotesPolicyName  
  INTEGER as csOrionFwLnotesPolicyAuthenticate  
  Integer32 as csOrionFwLnotesPolicyTimeout  
  DisplayString as csOrionFwLnotesPolicyRemoteServer  
  Integer32 as csOrionFwLnotesPolicyRemotePort  
  RowStatus as csOrionFwLnotesPolicyRowStatus  

CsOrionFwAolPolicyEntry  
SEQUENCE    
  DisplayString as csOrionFwAolPolicyName  
  Integer32 as csOrionFwAolPolicyTimeout  
  DisplayString as csOrionFwAolPolicyRemoteServer  
  Integer32 as csOrionFwAolPolicyRemotePort  
  RowStatus as csOrionFwAolPolicyRowStatus  

CsOrionFwCompuServePolicyEntry  
SEQUENCE    
  DisplayString as csOrionFwCompuServePolicyName  
  Integer32 as csOrionFwCompuServePolicyTimeout  
  DisplayString as csOrionFwCompuServePolicyRemoteServer  
  Integer32 as csOrionFwCompuServePolicyRemotePort  
  RowStatus as csOrionFwCompuServePolicyRowStatus  

CsOrionFwNetMeetingPolicyEntry  
SEQUENCE    
  DisplayString as csOrionFwNetMeetingPolicyName  
  Integer32 as csOrionFwNetMeetingPolicyTimeout  
  DisplayString as csOrionFwNetMeetingPolicyRemoteServer  
  Integer32 as csOrionFwNetMeetingPolicyRemotePort  
  RowStatus as csOrionFwNetMeetingPolicyRowStatus  

CsOrionFwMsSqlPolicyEntry  
SEQUENCE    
  DisplayString as csOrionFwMsSqlPolicyName  
  Integer32 as csOrionFwMsSqlPolicyTimeout  
  DisplayString as csOrionFwMsSqlPolicyRemoteServer  
  Integer32 as csOrionFwMsSqlPolicyRemotePort  
  RowStatus as csOrionFwMsSqlPolicyRowStatus  

CsOrionFwRshPolicyEntry  
SEQUENCE    
  DisplayString as csOrionFwRshPolicyName  
  Integer32 as csOrionFwRshPolicyTimeout  
  DisplayString as csOrionFwRshPolicyRemoteServer  
  RowStatus as csOrionFwRshPolicyRowStatus  

CsOrionVrPktFilterEntry  
SEQUENCE    
  Integer32 as csOrionVrPktFilterIndex  
  Integer32 as csOrionVrPktFilterAclId  
  INTEGER as csOrionVrPktFilterAction  
  INTEGER as csOrionVrPktFilterDirection  
  RowStatus as csOrionVrPktFilterRowStatus  
  INTEGER as csOrionVrPktFilterTcpStatus  
  Counter64 as csOrionVrPktFilterHitCounter  
  INTEGER as csOrionVrPktFilterCounterStatus  
  INTEGER as csOrionVrPktFilterEvlogStatus  

CsOrionViPktFilterEntry  
SEQUENCE    
  Integer32 as csOrionViPktFilterIndex  
  Integer32 as csOrionViPktFilterAclId  
  INTEGER as csOrionViPktFilterAction  
  INTEGER as csOrionViPktFilterDirection  
  RowStatus as csOrionViPktFilterRowStatus  
  INTEGER as csOrionViPktFilterTcpStatus  
  Counter64 as csOrionViPktFilterHitCounter  
  INTEGER as csOrionViPktFilterCounterStatus  
  INTEGER as csOrionViPktFilterEvlogStatus  

CsOrionNatPoolEntry  
SEQUENCE    
  Integer32 as csOrionNatPoolId  
  IpAddress as csOrionNatPoolStartAddress  
  IpAddress as csOrionNatPoolEndAddress  
  Integer32 as csOrionNatPoolStartPort  
  Integer32 as csOrionNatPoolEndPort  
  RowStatus as csOrionNatPoolStatus  

CsOrionNatTranslationEntry  
SEQUENCE    
  IpAddress as csOrionNatInsideLocalAddr  
  Integer32 as csOrionNatInsideLocalPort  
  IpAddress as csOrionNatOutsideGlobalAddr  
  Integer32 as csOrionNatOutsideGlobalPort  
  Integer32 as csOrionNatProtocol  
  IpAddress as csOrionNatInsideGlobalAddr  
  Integer32 as csOrionNatInsideGlobalPort  

CsOrionNatStaticTranslationEntry  
SEQUENCE    
  IpAddress as csOrionNatStaticInsideLocalAddress  
  IpAddress as csOrionNatStaticInsideGlobalAddress  
  RowStatus as csOrionNatStaticTranslationStatus  
  IpAddress as csOrionNatStaticNetmask  
  INTEGER as csOrionNatStaticTranslationType  

CsOrionNatStaticVITranslationEntry  
SEQUENCE    
  Integer32 as csOrionNatStaticIfIndex  
  IpAddress as csOrionNatStaticVIInsideLocalAddress  
  IpAddress as csOrionNatStaticVIInsideGlobalAddress  
  IpAddress as csOrionNatStaticVINetmask  
  INTEGER as csOrionNatStaticVITranslationType  
  RowStatus as csOrionNatStaticVITranslationStatus  

CsOrionNatGeneralParamEntry  
SEQUENCE    
  Integer32 as csOrionNatGenTimeout  
  Integer32 as csOrionNatTcpTimeout  
  Integer32 as csOrionNatUdpTimeout  
  Integer32 as csOrionNatIcmpTimeout  
  INTEGER as csOrionNatClearTrans  

CsOrionIpSecTransformEntry  
SEQUENCE    
  DisplayString as csOrionIpSecTransformName  
  DisplayString as csOrionIpSecTransform1  
  DisplayString as csOrionIpSecTransform2  
  DisplayString as csOrionIpSecTransform3  
  INTEGER as csOrionIpSecTransformInitVector  
  INTEGER as csOrionIpSecTransformMode  
  RowStatus as csOrionIpSecTransformStatus  

CsOrionDynamicCryptoMapEntry  
SEQUENCE    
  DisplayString as csOrionDynamicCryptoMapName  
  Integer32 as csOrionDynamicCryptoMapNumber  
  Integer32 as csOrionDynamicCryptoMapMatchAddress  
  IpAddress as csOrionDynamicCryptoMapPeer  
  DisplayString as csOrionDynamicCryptoMapTransformSet1  
  DisplayString as csOrionDynamicCryptoMapTransformSet2  
  DisplayString as csOrionDynamicCryptoMapTransformSet3  
  DisplayString as csOrionDynamicCryptoMapTransformSet4  
  DisplayString as csOrionDynamicCryptoMapTransformSet5  
  DisplayString as csOrionDynamicCryptoMapTransformSet6  
  Integer32 as csOrionDynamicCryptoMapSessionKeyLifetimeSec  
  Integer32 as csOrionDynamicCryptoMapSessionKeyLifetimeBytes  
  INTEGER as csOrionDynamicCryptoMapPfs  
  RowStatus as csOrionDynamicCryptoMapStatus  

CsOrionManualCryptoMapEntry  
SEQUENCE    
  DisplayString as csOrionManualCryptoMapName  
  Integer32 as csOrionManualCryptoMapNumber  
  Integer32 as csOrionManualCryptoMapMatchAddress  
  DisplayString as csOrionManualCryptoMapTransformSet  
  OCTET STRING as csOrionManualCryptoMapInboundAHKey  
  Integer32 as csOrionManualCryptoMapInboundAHSPI  
  OCTET STRING as csOrionManualCryptoMapOutboundAHKey  
  Integer32 as csOrionManualCryptoMapOutboundAHSPI  
  OCTET STRING as csOrionManualCryptoMapInboundESPKey  
  Integer32 as csOrionManualCryptoMapInboundESPSPI  
  OCTET STRING as csOrionManualCryptoMapInboundESPAuthKey  
  OCTET STRING as csOrionManualCryptoMapOutboundESPKey  
  Integer32 as csOrionManualCryptoMapOutboundESPSPI  
  OCTET STRING as csOrionManualCryptoMapOutboundESPAuthKey  
  RowStatus as csOrionManualCryptoMapStatus  

CsOrionIKECryptoMapEntry  
SEQUENCE    
  DisplayString as csOrionIKECryptoMapName  
  Integer32 as csOrionIKECryptoMapNumber  
  Unsigned32 as csOrionIKECryptoMapFlag  
  Integer32 as csOrionIKECryptoMapMatchAddress  
  INTEGER as csOrionIKECryptoMapPfsGroup  
  OCTET STRING as csOrionIKECryptoMapKey  
  DisplayString as csOrionIKECryptoMapTransformSet1  
  DisplayString as csOrionIKECryptoMapTransformSet2  
  DisplayString as csOrionIKECryptoMapTransformSet3  
  DisplayString as csOrionIKECryptoMapTransformSet4  
  DisplayString as csOrionIKECryptoMapTransformSet5  
  DisplayString as csOrionIKECryptoMapTransformSet6  
  DisplayString as csOrionIKECryptoMapPolicy  
  LongDisplayString as csOrionIKECryptoMapLocalIdentity  
  Integer32 as csOrionIKECryptoMapSaLifetimeSoftSec  
  Integer32 as csOrionIKECryptoMapSaLifetimeSoftKbytes  
  Integer32 as csOrionIKECryptoMapSaLifetimeHardSec  
  Integer32 as csOrionIKECryptoMapSaLifetimeHardKbytes  
  RowStatus as csOrionIKECryptoMapStatus  
  INTEGER as csOrionIKECryptoMapType  
  Integer32 as csOrionIKECryptoMapIdleTimeout  
  INTEGER as csOrionIKECryptoMapLocalIdentityType  
  LongDisplayString as csOrionIKECryptoMapRemoteIdentity1  
  LongDisplayString as csOrionIKECryptoMapRemoteIdentity2  
  LongDisplayString as csOrionIKECryptoMapRemoteIdentity3  
  LongDisplayString as csOrionIKECryptoMapRemoteIdentity4  
  LongDisplayString as csOrionIKECryptoMapRemoteIdentity5  
  INTEGER as csOrionIKECryptoMapRemoteIdentityType1  
  INTEGER as csOrionIKECryptoMapRemoteIdentityType2  
  INTEGER as csOrionIKECryptoMapRemoteIdentityType3  
  INTEGER as csOrionIKECryptoMapRemoteIdentityType4  
  INTEGER as csOrionIKECryptoMapRemoteIdentityType5  
  DisplayString as csOrionIKECryptoMapAddressPool  
  TruthValue as csOrionIKECryptoMapDynamicRouteAdd  

CsOrionIKEPolicyEntry  
SEQUENCE    
  DisplayString as csOrionIKEPolicyName  
  Integer32 as csOrionIKEPolicyPriority  
  INTEGER as csOrionIKEPolicyHash  
  INTEGER as csOrionIKEPolicyEncryption  
  Integer32 as csOrionIKEPolicySaLifetimeSoftSec  
  Integer32 as csOrionIKEPolicySaLifetimeSoftKbytes  
  Integer32 as csOrionIKEPolicySaLifetimeHardSec  
  Integer32 as csOrionIKEPolicySaLifetimeHardKbytes  
  INTEGER as csOrionIKEPolicyAuthentication  
  INTEGER as csOrionIKEPolicyPfsGroup  
  RowStatus as csOrionIKEPolicyStatus  
  Integer32 as csOrionIKEPolicyAuthorizationTypeFlag  

CsOrionIKECertEntry  
SEQUENCE    
  DisplayString as csOrionIKECertName  
  DisplayString as csOrionIKECertMapName  
  Integer32 as csOrionIKECertFlag  
  OCTET STRING as csOrionIKECertCertificate  
  OCTET STRING as csOrionIKECertPrivateKey  
  RowStatus as csOrionIKECertStatus  

CsOrionIKESvrParamEntry  
SEQUENCE    
  DisplayString as csOrionIKESvrParamMapName  
  Unsigned32 as csOrionIKESvrParamFlag  
  IpAddress as csOrionIKESvrParamIpAddress  
  Integer32 as csOrionIKESvrParamPort  
  Integer32 as csOrionIKESvrParamRetryLimit  
  Integer32 as csOrionIKESvrParamRetryTimer  
  Integer32 as csOrionIKESvrParamRetryTimerMicroSec  
  Integer32 as csOrionIKESvrParamRetryTimerMaximum  
  Integer32 as csOrionIKESvrParamExpireTimer  
  Integer32 as csOrionIKESvrParamSecretRecreate  
  Integer32 as csOrionIKESvrParamSPISize  
  Integer32 as csOrionIKESvrParamMaxKeyLength  
  Integer32 as csOrionIKESvrParamMaxSACount  
  Integer32 as csOrionIKESvrParamLocalSecretSize  
  INTEGER as csOrionIKESvrParamTokenHashType  
  RowStatus as csOrionIKESvrParamRowStatus  
  DisplayString as csOrionIKESvrParamAuthenticationList  
  DisplayString as csOrionIKESvrParamAuthorizationList  
  DisplayString as csOrionIKESvrParamAccountingList  
  IKERadiusAcctUserType as csOrionIKESvrParamRadiusAcctUserTypePriority1  
  IKERadiusAcctUserType as csOrionIKESvrParamRadiusAcctUserTypePriority2  
  IKERadiusAcctUserType as csOrionIKESvrParamRadiusAcctUserTypePriority3  

CsOrionIpSecEvLogEntry  
SEQUENCE    
  EvLogLevel as csOrionIpSecEvLogLevel  
  EvLogArea as csOrionIpSecEvLogArea  

CsOrionIpSecStatsEntry  
SEQUENCE    
  Counter64 as csOrionIpSecStatsRcvAhPktsDropped  
  Counter64 as csOrionIpSecStatsRcvAhPktsBadAh  
  Counter64 as csOrionIpSecStatsRcvAhPktsBadSpi  
  Counter64 as csOrionIpSecStatsRcvEspPktsDropped  
  Counter64 as csOrionIpSecStatsRcvEspPktsBadEsp  
  Counter64 as csOrionIpSecStatsRcvPktsOk  
  Counter64 as csOrionIpSecStatsTxPktsDenied  
  Counter32 as csOrionIpSecStatsEspTotalInboundSAs  
  Counter32 as csOrionIpSecStatsEspTotalInboundSAsFailed  
  Counter32 as csOrionIpSecStatsEspCurrentInboundSAs  
  Counter32 as csOrionIpSecStatsEspTotalOutboundSAs  
  Counter32 as csOrionIpSecStatsEspTotalOutboundSAsFailed  
  Counter32 as csOrionIpSecStatsEspCurrentOutboundSAs  
  Counter32 as csOrionIpSecStatsAhTotalInboundSAs  
  Counter32 as csOrionIpSecStatsAhTotalInboundSAsFailed  
  Counter32 as csOrionIpSecStatsAhCurrentInboundSAs  
  Counter32 as csOrionIpSecStatsAhTotalOutboundSAs  
  Counter32 as csOrionIpSecStatsAhTotalOutboundSAsFailed  
  Counter32 as csOrionIpSecStatsAhCurrentOutboundSAs  
  Counter32 as csOrionIpSecStatsEspCryptoCepEstablishOk  
  Counter32 as csOrionIpSecStatsEspCryptoCepEstablishFailed  
  Counter32 as csOrionIpSecStatsAhCryptoCepEstablishOk  
  Counter32 as csOrionIpSecStatsAhCryptoCepEstablishFailed  
  Counter64 as csOrionIpSecStatsEspEncryptPktsOk  
  Counter64 as csOrionIpSecStatsEspDecryptPktsOk  
  Counter64 as csOrionIpSecStatsAhEncryptPktsOk  
  Counter64 as csOrionIpSecStatsAhDecryptPktsOk  
  Counter64 as csOrionIpSecStatsEspEncryptPktsBad  
  Counter64 as csOrionIpSecStatsEspDecryptPktsBad  
  Counter64 as csOrionIpSecStatsAhEncryptPktsBad  
  Counter64 as csOrionIpSecStatsAhDecryptPktsBad  

CsOrionIKEStatsEntry  
SEQUENCE    
  Counter32 as csOrionIKEStatsPhase1Negotiations  
  Counter32 as csOrionIKEStatsPhase1NegotiationsFailed  
  Counter32 as csOrionIKEStatsPhase1InPkts  
  Counter32 as csOrionIKEStatsPhase1InPktsRejected  
  Counter32 as csOrionIKEStatsPhase1OutPkts  
  Counter32 as csOrionIKEStatsPhase2Negotiations  
  Counter32 as csOrionIKEStatsPhase2NegotiationsFailed  
  Counter32 as csOrionIKEStatsPhase2InPkts  
  Counter32 as csOrionIKEStatsPhase2InPktsRejected  
  Counter32 as csOrionIKEStatsPhase2OutPkts  

CsOrionIKEStateEntry  
SEQUENCE    
  Integer32 as csOrionIKEStateSAIndex  
  IpAddress as csOrionIKEStateLocalAddress  
  IpAddress as csOrionIKEStateRemoteAddress  
  INTEGER as csOrionIKEStateInitRespondFlag  
  INTEGER as csOrionIKEStateAuthenticationType  
  TimeStamp as csOrionIKEStateCreationTime  
  TimeStamp as csOrionIKEStateExpirationTime  
  Counter32 as csOrionIKEStateNegotiations  
  TimeStamp as csOrionIKEStateLastUsed  
  Counter32 as csOrionIKEStateBytesTransferred  
  DisplayString as csOrionIKEStateCryptoAlgorithm  
  DisplayString as csOrionIKEStateHashAlgorithm  
  DisplayString as csOrionIKEStatePrfAlgorithm  
  Integer32 as csOrionIKEStateRetryLimit  
  Integer32 as csOrionIKEStateRetryTimer  
  Integer32 as csOrionIKEStateRetryTimerMicroSec  
  Integer32 as csOrionIKEStateMaxRetryDuration  
  Integer32 as csOrionIKEStateMaxRetryDurationMicroSec  

CsOrionIKEDialupConnEntry  
SEQUENCE    
  Integer32 as csOrionIKEDialupConnIndex  
  IpAddress as csOrionIKEDialupConnRemIpAddress  
  DisplayString as csOrionIKEDialupConnUserId  
  DisplayString as csOrionIKEDialupConnDistinguishName  
  INTEGER as csOrionIKEDialupConnRowStatus  

CsOrionIpSecStateEntry  
SEQUENCE    
  Integer32 as csOrionIpSecStateSAIndex  
  Unsigned32 as csOrionIpSecStateSpi  
  Integer32 as csOrionIpSecStateSAFlag  
  INTEGER as csOrionIpSecStateProtocol  
  Integer32 as csOrionIpSecStatePort  
  INTEGER as csOrionIpSecStateCreatorType  
  IpAddress as csOrionIpSecStateRemoteGateway  
  IpAddress as csOrionIpSecStateLocalGateway  
  IpAddress as csOrionIpSecStateRemoteEndPoint  
  IpAddress as csOrionIpSecStateLocalEndPoint  
  INTEGER as csOrionIpSecStateAlgorithmType  
  INTEGER as csOrionIpSecStateSAType  
  TimeStamp as csOrionIpSecStateExpire  
  TimeStamp as csOrionIpSecStateLastUsed  
  INTEGER as csOrionIpSecStateDirection  
  DisplayString as csOrionIpSecStateEncryptionAlgorithm  
  DisplayString as csOrionIpSecStateHashAlgorithm  

CsOrionIpSecEventLogEntry  
SEQUENCE    
  EvLogLevel as csOrionIpSecEventLogLevel  
  EvLogArea as csOrionIpSecEventLogArea  

CsOrionVrNbnsConfigEntry  
SEQUENCE    
  IpAddress as csOrionVrPrimaryNbnsServer  
  IpAddress as csOrionVrSecondaryNbnsServer  

CsOrionAAAServerConfigEntry  
SEQUENCE    
  INTEGER as csOrionAAAServerType  
  DisplayString as csOrionAAAServerName  
  IpAddress as csOrionAAAServerIpAddress  
  Integer32 as csOrionAAAServerPort  
  Integer32 as csOrionAAAServerRetransmit  
  Integer32 as csOrionAAAServerTimeout  
  OCTET STRING as csOrionAAAServerRadiusKey  
  DisplayString as csOrionAAAServerLdapUsername  
  DisplayString as csOrionAAAServerLdapPassword  
  DisplayString as csOrionAAAServerLdapSearchBase  
  DisplayString as csOrionAAAServerLdapSearchFilter  
  INTEGER as csOrionAAAServerRowStatus  

CsOrionAAAServerListConfigEntry  
SEQUENCE    
  INTEGER as csOrionAAAServerListType  
  DisplayString as csOrionAAAServerListName  
  Integer32 as csOrionAAAServerListPriority  
  DisplayString as csOrionAAAServerListSvrName  
  INTEGER as csOrionAAAServerListSvrType  
  INTEGER as csOrionAAAServerListRowStatus  

CsOrionAAAServerListAdminEntry  
SEQUENCE    
  INTEGER as csOrionAAAServerListAdminRowStatus  

CsOrionVrSpfConfEntry  
SEQUENCE    
  Integer32 as csOrionVrSpfConnTblSize  
  Integer32 as csOrionVrSpfTcpInitTblSize  
  Integer32 as csOrionVrSpfUdpInitTblSize  
  INTEGER as csOrionVrSpfTcpSeqCheck  
  Integer32 as csOrionVrSpfTcpInitTimeout  
  Integer32 as csOrionVrSpfTcpIdleTimeout  
  Integer32 as csOrionVrSpfTcpCloseTimeout  
  Integer32 as csOrionVrSpfUdpIdleTimeout  
  Integer32 as csOrionVrSpfIcmpIdleTimeout  
  Integer32 as csOrionVrSpfTcpCurrentConnTableEntries  
  Integer32 as csOrionVrSpfUdpCurrentConnTableEntries  
  Integer32 as csOrionVrSpfIcmpCurrentConnTableEntries  
  Integer32 as csOrionVrSpfTcpTotalConnTableEntries  
  Integer32 as csOrionVrSpfUdpTotalConnTableEntries  
  Integer32 as csOrionVrSpfIcmpTotalConnTableEntries  
  Integer32 as csOrionVrSpfTcpSynTableEntries  
  Integer32 as csOrionVrSpfUdpUnmatchedTableEntries  
  Integer32 as csOrionVrSpfCleanTablesFlag  

CsOrionVncQueueEntry  
SEQUENCE    
  Integer32 as csOrionVncQueueId  
  Integer32 as csOrionVncQueueAclId  
  Integer32 as csOrionVncQueueMinBw  
  Integer32 as csOrionVncQueueMaxBw  
  RowStatus as csOrionVncQueueRowStatus  

CsOrionPppConfigEntry  
SEQUENCE    
  DisplayString as csOrionPppConfigHostname  

CsOrionPppIfConfigEntry  
SEQUENCE    
  Integer32 as csOrionPppIfSlotIndex  
  Integer32 as csOrionPppIfModuleIndex  
  Integer32 as csOrionPppIfPortIndex  
  Integer32 as csOrionPppIfChIndex  
  Integer32 as csOrionPppIfSubIfIndex  
  INTEGER as csOrionPppIfConfigAuth  
  INTEGER as csOrionPppIfEncryption  
  INTEGER as csOrionPppIfEncryptionMode  
  Integer32 as csOrionPppIfRetransmit  
  Integer32 as csOrionPppIfConfigReqRtx  
  Integer32 as csOrionPppIfTerminateReqRtx  
  Integer32 as csOrionPppIfTimeout  
  Integer32 as csOrionPppIfReauth  
  INTEGER as csOrionPppIfAdminStatus  
  OperStatus as csOrionPppIfOperStatus  
  EvLogLevel as csOrionPppIfEvLogLevel  
  EvLogArea as csOrionPppIfEvLogArea  
  Integer32 as csOrionPppIfEchoTimeout  

CsOrionPppRemoteUserEntry  
SEQUENCE    
  DisplayString as csOrionPppRemoteUserName  
  DisplayString as csOrionPppRemoteUserPassword  
  RowStatus as csOrionPppRemoteUserRowStatus  
  DisplayString as csOrionPppRemoteUserConnProfile  

CsOrionPptpConfEntry  
SEQUENCE    
  INTEGER as csOrionPptpConfStatus  
  Integer32 as csOrionPptpConfMaxConn  
  Integer32 as csOrionPptpConfIdleTimeout  
  Integer32 as csOrionPptpConfPPPKeepAliveInterval  
  INTEGER as csOrionPptpConfEncryption  
  INTEGER as csOrionPptpConfAuthentication  
  DisplayString as csOrionPptpConfIpPool  

CsOrionPptpConnEntry  
SEQUENCE    
  IpAddress as csOrionPptpConnFarIpAddr  
  IpAddress as csOrionPptpConnLocalIpAddr  
  Integer32 as csOrionPptpConnAge  
  INTEGER as csOrionPptpConnStatus  
  DisplayString as csOrionPptpConnFarUsername  

CsOrionVrRadiusConfigEntry  
SEQUENCE    
  Integer32 as csOrionVrRadiusRetransmit  
  Integer32 as csOrionVrRadiusTimeout  

CsOrionVrRadiusSvrEntry  
SEQUENCE    
  Integer32 as csOrionVrRadiusSvrPriority  
  IpAddress as csOrionVrRadiusSvrAddress  
  OCTET STRING as csOrionVrRadiusSvrKey  
  RowStatus as csOrionVrRadiusSvrRowStatus  
  OperStatus as csOrionVrRadiusSvrOperStatus  
  Integer32 as csOrionVrRadiusSvrPort  

CsOrionVrRadiusAcctSvrEntry  
SEQUENCE    
  Integer32 as csOrionVrRadiusAcctSvrPriority  
  IpAddress as csOrionVrRadiusAcctSvrAddress  
  OCTET STRING as csOrionVrRadiusAcctSvrKey  
  RowStatus as csOrionVrRadiusAcctSvrRowStatus  
  OperStatus as csOrionVrRadiusAcctSvrOperStatus  
  Integer32 as csOrionVrRadiusAcctSvrPort  

CsOrionVrDhcpRelayConfigEntry  
SEQUENCE    
  Integer32 as csOrionVrDhcpRelayMaxHops  
  Integer32 as csOrionVrDhcpRelaySecsThreshold  
  OperStatus as csOrionVrDhcpRelayOperStatus  
  INTEGER as csOrionVrDhcpRelayAdminStatus  

CsOrionVrDhcpRelayServerEntry  
SEQUENCE    
  IpAddress as csOrionVrDhcpRelayServerAddress  
  DisplayString as csOrionVrDhcpRelayServerName  
  RowStatus as csOrionVrDhcpRelayServerRowStatus  

CsOrionDhcpRelayStatsEntry  
SEQUENCE    
  Counter32 as csOrionDhcpRelayInReqs  
  Counter32 as csOrionDhcpRelayInDiscs  
  Counter32 as csOrionDhcpRelayInRels  
  Counter32 as csOrionDhcpRelayInDecs  
  Counter32 as csOrionDhcpRelayInAcks  
  Counter32 as csOrionDhcpRelayInNaks  
  Counter32 as csOrionDhcpRelayInOffers  
  Counter32 as csOrionDhcpRelayOutReqs  
  Counter32 as csOrionDhcpRelayOutDiscs  
  Counter32 as csOrionDhcpRelayOutRels  
  Counter32 as csOrionDhcpRelayOutDecs  
  Counter32 as csOrionDhcpRelayOutAcks  
  Counter32 as csOrionDhcpRelayOutNaks  
  Counter32 as csOrionDhcpRelayOutOffers  

CsOrionVrDnsConfigEntry  
SEQUENCE    
  IpAddress as csOrionVrPrimaryDnsServer  
  IpAddress as csOrionVrSecondaryDnsServer  

CsOrionVrIfManagerEntry  
SEQUENCE    
  Integer32 as csOrionVrIfManagerSlotIndex  
  Integer32 as csOrionVrIfManagerModuleIndex  
  Integer32 as csOrionVrIfManagerPortIndex  
  Integer32 as csOrionVrIfManagerChannelIndex  
  Integer32 as csOrionVrIfManagerSubifIndex  
  RowStatus as csOrionVrIfManagerRowStatus  

CsOrionConnectionProfileEntry  
SEQUENCE    
  LongDisplayString as csOrionConnectionProfileName  
  Integer32 as csOrionConnectionProfileVpnId  
  IpAddress as csOrionConnectionProfileVrId  
  LongDisplayString as csOrionConnectionProfileAddrPoolname  
  IpAddress as csOrionConnectionProfileLnsAddress  
  RowStatus as csOrionConnectionProfileRowStatus  

CsOrionServiceTemplateEntry  
SEQUENCE    
  LongDisplayString as csOrionServiceTemplateName  
  RowStatus as csOrionServiceTemplateRowStatus  

CsOrionServiceTemplateConnProfileEntry  
SEQUENCE    
  LongDisplayString as csOrionServiceTemplateConnProfileName  
  RowStatus as csOrionServiceTemplateConnProfileRowStatus  

CsOrionCiscoHdlcConfigEntry  
SEQUENCE    
  Integer32 as csOrionCiscoHdlcSlotIndex  
  Integer32 as csOrionCiscoHdlcModuleIndex  
  Integer32 as csOrionCiscoHdlcPortIndex  
  Integer32 as csOrionCiscoHdlcChIndex  
  Integer32 as csOrionCiscoHdlcSlarpKeepAlive  
  OperStatus as csOrionCiscoHdlcOperStatus  
  INTEGER as csOrionCiscoHdlcAdminStatus  

CsOrionFRoIPConfEntry  
SEQUENCE    
  Integer32 as csOrionFRoIPVIfaceId  
  Integer32 as csOrionFRoIPConfMaxPeer  
  Integer32 as csOrionFRoIPConfDefaultWindowSize  
  Integer32 as csOrionFRoIPConfDefaultWindowTimeout  
  Integer32 as csOrionFRoIPConfDefaultServiceSlot  
  Integer32 as csOrionFRoIPConfNumActiveTransports  
  INTEGER as csOrionFRoIPAdminStatus  
  OperStatus as csOrionFRoIPOperStatus  

CsOrionFRoIPTransportEntry  
SEQUENCE    
  IpAddress as csOrionFRoIPTransportPeer  
  INTEGER as csOrionFRoIPTransportMode  
  Integer32 as csOrionFRoIPTransportWindowSize  
  Integer32 as csOrionFRoIPTransportWindowTimeout  
  Integer32 as csOrionFRoIPTransportKeepAlive  
  Integer32 as csOrionFRoIPTransportEventWindowSize  
  Integer32 as csOrionFRoIPTransportPermittedBadEvents  
  Integer32 as csOrionFRoIPTransportDefaultSlot  
  Counter32 as csOrionFRoIPTransportOutPkts  
  Counter32 as csOrionFRoIPTransportInPkts  
  Counter32 as csOrionFRoIPTransportOutBytes  
  Counter32 as csOrionFRoIPTransportInBytes  
  RowStatus as csOrionFRoIPTransportRowStatus  
  INTEGER as csOrionFRoIPTransportAdminStatus  
  OperStatus as csOrionFRoIPTransportOperStatus  

CsFRoIPCircuitEntry  
SEQUENCE    
  DLCI as csFRoIPCircuitDlci  
  INTEGER as csFRoIPCircuitState  
  Counter32 as csFRoIPCircuitReceivedFECNs  
  Counter32 as csFRoIPCircuitReceivedBECNs  
  Counter32 as csFRoIPCircuitSentFrames  
  Counter32 as csFRoIPCircuitSentOctets  
  Counter32 as csFRoIPCircuitReceivedFrames  
  Counter32 as csFRoIPCircuitReceivedOctets  
  TimeStamp as csFRoIPCircuitCreationTime  
  TimeStamp as csFRoIPCircuitLastTimeChange  
  Integer32 as csFRoIPCircuitCommittedBurst  
  Integer32 as csFRoIPCircuitExcessBurst  
  Integer32 as csFRoIPCircuitThroughput  
  INTEGER as csFRoIPCircuitMulticast  
  INTEGER as csFRoIPCircuitType  
  Counter32 as csFRoIPCircuitDiscards  
  Counter32 as csFRoIPCircuitReceivedDEs  
  Counter32 as csFRoIPCircuitSentDEs  
  RowStatus as csFRoIPCircuitRowStatus  
  OperStatus as csFRoIPCircuitOperStatus  
  OCTET STRING as csFRoIPCircuitFwdLink  

CsOrionL2tpConfigEntry  
SEQUENCE    
  Integer32 as csOrionL2tpConfigServiceIf  
  Integer32 as csOrionL2tpConfigMaxTunnels  
  Integer32 as csOrionL2tpConfigMaxSessionsPerTunnel  
  INTEGER as csOrionL2tpConfigTunnelAuthentication  
  Integer32 as csOrionL2tpConfigTunnelHelloInterval  
  Integer32 as csOrionL2tpConfigTunnelMaxRetransmissions  
  Integer32 as csOrionL2tpConfigTunnelMaxRetransmissionTimeout  
  Integer32 as csOrionL2tpConfigTunnelRWS  
  Integer32 as csOrionL2tpConfigTunnelEmptyTunnelTimeout  
  INTEGER as csOrionL2tpConfigSessionFlowControl  
  Integer32 as csOrionL2tpConfigSessionRWS  
  Integer32 as csOrionL2tpConfigSessionTxQueueSize  
  INTEGER as csOrionL2tpConfigSessionPacketSequencing  
  Integer32 as csOrionL2tpConfigPppConfigReqRetransmission  
  Integer32 as csOrionL2tpConfigPppRestartTimeout  
  Integer32 as csOrionL2tpConfigPppTermReqRetransmission  
  INTEGER as csOrionL2tpConfigPppAuthProtocol  
  Integer32 as csOrionL2tpConfigPppReauthPeriod  
  Integer32 as csOrionL2tpConfigPppEchoTimeout  
  DisplayString as csOrionL2tpConfigPppIpPoolName  

CsOrionL2tpTunnelEntry  
SEQUENCE    
  Integer32 as csOrionL2tpTunnelLocalId  
  Integer32 as csOrionL2tpTunnelMaxSessions  
  INTEGER as csOrionL2tpTunnelAuthentication  
  Integer32 as csOrionL2tpTunnelHelloInterval  
  Integer32 as csOrionL2tpTunnelMaxRetransmissions  
  Integer32 as csOrionL2tpTunnelMaxRetransmissionTimeout  
  Integer32 as csOrionL2tpTunnelRWS  
  Integer32 as csOrionL2tpTunnelEmptyTunnelTimeout  
  Integer32 as csOrionL2tpTunnelUpTime  
  IpAddress as csOrionL2tpTunnelRemoteIpAddress  
  Integer32 as csOrionL2tpTunnelRemoteTunnelId  
  Integer32 as csOrionL2tpTunnelRemoteUdpPort  
  Integer32 as csOrionL2tpTunnelRemoteRWS  
  DisplayString as csOrionL2tpTunnelRemoteHostname  
  Integer32 as csOrionL2tpTunnelActiveSessionsCount  
  RowStatus as csOrionL2tpTunnelStatus  

CsOrionL2tpSessionEntry  
SEQUENCE    
  Integer32 as csOrionL2tpSessionLocalId  
  INTEGER as csOrionL2tpSessionFlowControl  
  Integer32 as csOrionL2tpSessionRWS  
  Integer32 as csOrionL2tpSessionTxQueueSize  
  INTEGER as csOrionL2tpSessionPacketSequencing  
  Integer32 as csOrionL2tpSessionUpTime  
  Integer32 as csOrionL2tpSessionRemoteCallId  
  INTEGER as csOrionL2tpSessionRemoteFlowControl  
  Integer32 as csOrionL2tpSessionRemoteRWS  
  DisplayString as csOrionL2tpSessionUsername  
  RowStatus as csOrionL2tpSessionRowStatus  
  IpAddress as csOrionL2tpSessionLocalIpAddress  
  IpAddress as csOrionL2tpSessionRemoteIpAddress  
  INTEGER as csOrionL2tpSessionCallType  
  INTEGER as csOrionL2tpSessionState  

CsOrionLnsConfigEntry  
SEQUENCE    
  INTEGER as csOrionLnsConfigAdminStatus  

CsOrionLacConfigEntry  
SEQUENCE    
  INTEGER as csOrionLacConfigAdminStatus  

CsOrionTunnelSwitchEntry  
SEQUENCE    
  OCTET STRING as csOrionTunnelSwitchClientName  
  INTEGER as csOrionTunnelSwitchMode  
  RowStatus as csOrionTunnelSwitchRowStatus  

CsOrionTunnelSwitchTargetEntry  
SEQUENCE    
  IpAddress as csOrionTunnelSwitchTargetIpAddress  
  Integer32 as csOrionTunnelSwitchTargetPriority  
  Integer32 as csOrionTunnelSwitchTargetMaxSession  
  Counter32 as csOrionTunnelSwitchTargetSessionCount  
  RowStatus as csOrionTunnelSwitchTargetRowStatus  

CsOrionL2tpStatsEntry  
SEQUENCE    
  Counter32 as csOrionL2tpStatsTotalTunnels  
  Counter32 as csOrionL2tpStatsFailedTunnels  
  Counter32 as csOrionL2tpStatsFailedAuthentications  
  Gauge32 as csOrionL2tpStatsActiveTunnels  
  Counter32 as csOrionL2tpStatsTotalSessions  
  Counter32 as csOrionL2tpStatsFailedSessions  
  Gauge32 as csOrionL2tpStatsActiveSessions  
  INTEGER as csOrionL2tpStatsDrainingTunnels  
  Counter32 as csOrionL2tpStatsControlRecvOctets  
  Counter32 as csOrionL2tpStatsControlRecvPackets  
  Counter32 as csOrionL2tpStatsControlSendOctets  
  Counter32 as csOrionL2tpStatsControlSendPackets  
  Counter32 as csOrionL2tpStatsPayloadRecvOctets  
  Counter32 as csOrionL2tpStatsPayloadRecvPackets  
  Counter32 as csOrionL2tpStatsPayloadRecvDiscards  
  Counter32 as csOrionL2tpStatsPayloadSendOctets  
  Counter32 as csOrionL2tpStatsPayloadSendPackets  

CsOrionL2tpTunnelStatsEntry  
SEQUENCE    
  INTEGER as csOrionL2tpTunnelStatsState  
  Counter32 as csOrionL2tpTunnelStatsTotalSessions  
  Counter32 as csOrionL2tpTunnelStatsFailedSessions  
  Gauge32 as csOrionL2tpTunnelStatsActiveSessions  

CsOrionVrDsByteFilterEntry  
SEQUENCE    
  Integer32 as csOrionVrDsByteFilterIndex  
  Integer32 as csOrionVrDsByteFilterAclId  
  INTEGER as csOrionVrDsByteFilterAction  
  Integer32 as csOrionVrDsByteFilterValue  
  INTEGER as csOrionVrDsByteFilterDirection  
  RowStatus as csOrionVrDsByteFilterRowStatus  

CsOrionViDsByteFilterEntry  
SEQUENCE    
  Integer32 as csOrionViDsByteFilterIndex  
  Integer32 as csOrionViDsByteFilterAclId  
  INTEGER as csOrionViDsByteFilterAction  
  Integer32 as csOrionViDsByteFilterValue  
  INTEGER as csOrionViDsByteFilterDirection  
  RowStatus as csOrionViDsByteFilterRowStatus  

CsExpFilterEntry  
SEQUENCE    
  INTEGER as csExpFilterDirection  
  Integer32 as csExpFilterMatchingExp  
  Integer32 as csExpFilterExpValue  
  INTEGER as csExpFilterServiceCategory  
  INTEGER as csExpFilterColorMeteringMode  
  INTEGER as csExpFilterDropPrecedence  
  RowStatus as csExpFilterRowStatus  

CsExpFilterIfEntry  
SEQUENCE    
  INTEGER as csExpFilterIfDirection  
  Integer32 as csExpFilterIfMatchingExp  
  Integer32 as csExpFilterIfExpValue  
  INTEGER as csExpFilterIfServiceCategory  
  INTEGER as csExpFilterIfColorMeteringMode  
  INTEGER as csExpFilterIfDropPrecedence  
  RowStatus as csExpFilterIfRowStatus  

CsOrionQoSMeterProfileEntry  
SEQUENCE    
  DisplayString as csOrionQoSMeterProfileName  
  Integer32 as csOrionQoSMeterProfileCBS  
  Integer32 as csOrionQoSMeterProfilePBS  
  Integer32 as csOrionQoSMeterProfileCIR  
  Integer32 as csOrionQoSMeterProfileMIR  
  INTEGER as csOrionQoSMeterProfileDropPrecedence  
  INTEGER as csOrionQoSMeterProfileColorMode  
  RowStatus as csOrionQoSMeterProfileStatus  

CsOrionQoSMeterEntry  
SEQUENCE    
  DisplayString as csOrionQoSMeterName  
  DisplayString as csOrionQoSMeterProfile  
  Counter32 as csOrionQoSMeterTotalPackets  
  Counter32 as csOrionQoSMeterRedByteCount  
  Counter32 as csOrionQoSMeterYellowByteCount  
  Counter32 as csOrionQoSMeterGreenByteCount  
  DisplayString as csOrionQoSMeterAclList  
  RowStatus as csOrionQoSMeterStatus  

CsOrionVrQoSFilterEntry  
SEQUENCE    
  Integer32 as csOrionVrQoSFilterIndex  
  Integer32 as csOrionVrQoSFilterAclId  
  DisplayString as csOrionVrQoSFilterMeterName  
  INTEGER as csOrionVrQoSFilterServiceCategory  
  RowStatus as csOrionVrQoSFilterStatus  

CsOrionViQoSFilterEntry  
SEQUENCE    
  Integer32 as csOrionViQoSFilterIndex  
  Integer32 as csOrionViQoSFilterAclId  
  DisplayString as csOrionViQoSFilterMeterName  
  INTEGER as csOrionViQoSFilterServiceCategory  
  RowStatus as csOrionViQoSFilterStatus  

CsPppoeAcIfConfigEntry  
SEQUENCE    
  Integer32 as csPppoeAcIfSlotIndex  
  Integer32 as csPppoeAcIfModuleIndex  
  Integer32 as csPppoeAcIfPortIndex  
  Integer32 as csPppoeAcIfChannelIndex  
  Integer32 as csPppoeAcIfSubIfIndex  
  Integer32 as csPppoeAcIfConfigMaxSessions  
  Integer32 as csPppoeAcIfConfigMaxSessionsPerHost  
  Integer32 as csPppoeAcIfConfigTotalSessions  
  Integer32 as csPppoeAcIfConfigTotalActiveSessions  
  OCTET STRING as csPppoeAcIfConfigPortEthernetAddress  
  INTEGER as csPppoeAcIfConfigVolunteerServiceAdvertising  
  DisplayString as csPppoeAcIfConfigName  
  INTEGER as csPppoeAcIfConfigAdminStatus  
  OperStatus as csPppoeAcIfConfigOperStatus  
  DisplayString as csPppoeAcIfConfigServiceTemplateProfile  
  INTEGER as csPppoeConfigPppIfAuth  
  Integer32 as csPppoeConfigPppIfEchoTimeout  
  EvLogLevel as csPppoeAcIfConfigEvLogLevel  
  EvLogArea as csPppoeAcIfConfigEvLogArea  

CsPppoeSessionEntry  
SEQUENCE    
  Integer32 as csPppoeSessionId  
  DisplayString as csPppoeSessionUserName  
  OperStatus as csPppoeSessionOperStatus  
  OCTET STRING as csPppoeSessionPeerAddress  
  DisplayString as csPppoeSessionServiceName  
  Integer32 as csPppoeSessionDuration  
  DisplayString as csPppoeSessionIPPoolNameInUse  
  Integer32 as csPppoeSessionServiceVPN  
  IpAddress as csPppoeSessionServiceVR  
  Counter64 as csPppoeSessionReceivedPkts  
  Counter64 as csPppoeSessionReceivedOctets  
  Counter64 as csPppoeSessionTranmittedPkts  
  Counter64 as csPppoeSessionTransmittedOctets  
  Counter64 as csPppoeSessionReceiveOperDown  
  Counter64 as csPppoeSessionTransmitOperDown  
  Counter64 as csPppoeSessionReceivedErrors  
  RowStatus as csPppoeSessionRowStatus  

CsPppoeAcIfStatEntry  
SEQUENCE    
  Counter64 as csPppoeAcIfStatPADIReceive  
  Counter64 as csPppoeAcIfStatPADIReject  
  Counter64 as csPppoeAcIfStatPADRReceive  
  Counter64 as csPppoeAcIfStatPADRReject  
  Counter64 as csPppoeAcIfStatPADOTransmit  
  Counter64 as csPppoeAcIfStatPADSTransmit  
  Counter64 as csPppoeAcIfStatPADTReceive  
  Counter64 as csPppoeAcIfStatPADTTransmit  
  Counter64 as csPppoeAcIfStatGenericErrorReceive  
  Counter64 as csPppoeAcIfStatGenericErrorTransmit  
  Counter64 as csPppoeAcIfStatMalformedPkts  
  Counter64 as csPppoeAcIfStatServiceNameErrors  
  Counter64 as csPppoeAcIfStatACSystemErrors  
  Counter64 as csPppoeAcIfStatPppAuthFails  
  Counter64 as csPppoeAcIfStatAccessVRFails  

CsOrionMlpppBundleEntry  
SEQUENCE    
  Integer32 as csOrionMlpppBundleSlot  
  Integer32 as csOrionMlpppBundleIndex  
  Integer32 as csOrionMlpppBundleMaxLinks  
  Integer32 as csOrionMlpppBundleQueueSize  
  Integer32 as csOrionMlpppBundleFragmentsPerPacket  
  Integer32 as csOrionMlpppBundleReorderTimeout  
  Integer32 as csOrionMlpppBundleTxMRRU  
  Integer32 as csOrionMlpppBundleRxMRRU  
  INTEGER as csOrionMlpppBundleEventLogLevel  
  INTEGER as csOrionMlpppBundleAdminStatus  
  OperStatus as csOrionMlpppBundleOperStatus  
  RowStatus as csOrionMlpppBundleRowStatus  
  Integer32 as csOrionMlpppBundleActiveLinks  
  Counter32 as csOrionMlpppBundlePacketsSent  
  Counter32 as csOrionMlpppBundlePacketsReceived  
  Counter32 as csOrionMlpppBundleBytesSent  
  Counter32 as csOrionMlpppBundleBytesReceived  
  DisplayString as csOrionMlpppBundleSiteName  

CsOrionMlpppLinkEntry  
SEQUENCE    
  Integer32 as csOrionMlpppLinkSlotIndex  
  Integer32 as csOrionMlpppLinkPortIndex  
  Integer32 as csOrionMlpppLinkChannelIndex  
  Integer32 as csOrionMlpppLinkSubIfIndex  
  RowStatus as csOrionMlpppLinkRowStatus  

CsOrionPowerSupplyEntry  
SEQUENCE    
  Integer32 as csOrionPowerSupplyIndex  
  INTEGER as csOrionPowerSupplyInputPowerState  
  INTEGER as csOrionPowerSupplyOutputPowerState  

CsOrionFanEntry  
SEQUENCE    
  Integer32 as csOrionFanIndex  
  INTEGER as csOrionFanState  
  Gauge32 as csOrionFanSpeed  

CsOrionFanTrayControlEntry  
SEQUENCE    
  INTEGER as csOrionFanTray  
  DisplayString as csOrionFanTrayHWRevision  
  DisplayString as csOrionFanTrayFWMajorRevision  
  DisplayString as csOrionFanTrayFWMinorRevision  
  DisplayString as csOrionFanTrayFWRelease  
  DisplayString as csOrionFanTrayFWReleaseDate  
  INTEGER as csOrionFanTrayEventTrapGeneration  

CsOrionFanTempSensorEntry  
SEQUENCE    
  INTEGER as csOrionFanTempSensorState  
  Integer32 as csOrionFanTempSensorTemperature  

CsOrionTempAirFlowCardEntry  
SEQUENCE    
  INTEGER as csOrionAirFlowCardIndex  
  DisplayString as csOrionAirFlowCardHWRevision  
  DisplayString as csOrionAirFlowCardFWMajorRevision  
  DisplayString as csOrionAirFlowCardFWMinorRevision  
  DisplayString as csOrionAirFlowCardFWRelease  
  DisplayString as csOrionAirFlowCardFWReleaseDate  
  Integer32 as csOrionAirFlowCardTemperature  
  INTEGER as csOrionAirFlowCardTempState  
  INTEGER as csOrionAirFlowCardEventTrapGeneration  

CsOrionSnmpGenEntry  
SEQUENCE    
  INTEGER as csOrionSnmpGenStatus  

CsOrionSnmpCommEntry  
SEQUENCE    
  DisplayString as csOrionSnmpCommString  
  IpAddress as csOrionSnmpCommAddr  
  INTEGER as csOrionSnmpCommPriv  
  RowStatus as csOrionSnmpCommRowStatus  

CsOrionSnmpAgentErrorEntry  
SEQUENCE    
  IpAddress as csOrionSnmpAgentErrorNmsIpAddress  
  Integer32 as csOrionSnmpAgentErrorNmsPort  
  Integer32 as csOrionSnmpAgentErrorNmsRequestId  
  Integer32 as csOrionSnmpAgentErrorCode  
  DisplayString as csOrionSnmpAgentErrorMsg  

CsOrionSnmpTrapEntry  
SEQUENCE    
  INTEGER as csOrionSnmpTrapStatus  

CsOrionTrapReceiverEntry  
SEQUENCE    
  DisplayString as csOrionTrapReceiverComm  
  IpAddress as csOrionTrapReceiverAddr  
  RowStatus as csOrionTrapReceiverRowStatus  
  Integer32 as csOrionTrapReceiverPort  
  INTEGER as csOrionTrapReceiverTrapType  

CsOrionVpnAcctEntry  
SEQUENCE    
  OCTET STRING as csOrionVpnAcctCompStats SIZE(0..1000)  

CsOrionVrAcctEntry  
SEQUENCE    
  OCTET STRING as csOrionVrAcctCompStats SIZE(0..1000)  

CsDot1dBaseBridgeEntry  
SEQUENCE    
  MacAddress as csDot1dBaseBridgeAddress  
  INTEGER as csDot1dBaseNumPorts  
  Counter32 as csDot1dTpLearnedEntryDiscards  
  INTEGER as csDot1dTpAgingTime  
  RowStatus as csDot1dBaseBridgeEntryRowStatus  

CsDot1dTpFdbEntry  
SEQUENCE    
  MacAddress as csDot1dTpFdbAddress  
  INTEGER as csDot1dTpFdbPort  
  INTEGER as csDot1dTpFdbSubPort  
  INTEGER as csDot1dTpFdbStatus  

CsDot1dPortEntry  
SEQUENCE    
  INTEGER as csDot1dPortIndex  
  DisplayString as csDot1dPortRemoteEnd SIZE(0..80)  
  INTEGER as csDot1dPortType  
  INTEGER as csDot1dPortStatus  
  RowStatus as csDot1dPortEntryRowStatus  

CsOrionRadiusAcctEntry  
SEQUENCE    
  Integer32 as csOrionRadiusAcctIndex  
  TimeTicks as csOrionRadiusAcctTimestamp  
  Integer32 as csOrionRadiusAcctVpnId  
  IpAddress as csOrionRadiusAcctVrId  
  OCTET STRING as csOrionRadiusAcctInfo SIZE(0..1000)  

CsTelnetSvrConfEntry  
SEQUENCE    
  INTEGER as csTelnetSvrConfAdminStatus  
  Integer32 as csTelnetSvrConfTimeout  
  Integer32 as csTelnetSvrConfNumOfSessions  

CsTelnetConnEntry  
SEQUENCE    
  Integer32 as csTelnetConnId  
  IpAddress as csTelnetConnIpAddr  
  Integer32 as csTelnetConnPort  
  RowStatus as csTelnetConnRowStatus  

CsOrionSyslogdEntry  
SEQUENCE    
  INTEGER as csOrionSyslogdStatus  
  IpAddress as csOrionSyslogdReceiverAddr  
  INTEGER as csOrionSyslogdFacility1  
  INTEGER as csOrionSyslogdFacility2  
  INTEGER as csOrionSyslogdFacility3  
  INTEGER as csOrionSyslogdFacility4  
  INTEGER as csOrionSyslogdFacility5  
  INTEGER as csOrionSyslogdFacility6  
  INTEGER as csOrionSyslogdFacility7  
  INTEGER as csOrionSyslogdFacility8  
  INTEGER as csOrionSyslogdLevel1  
  INTEGER as csOrionSyslogdLevel2  
  INTEGER as csOrionSyslogdLevel3  
  INTEGER as csOrionSyslogdLevel4  
  INTEGER as csOrionSyslogdLevel5  
  INTEGER as csOrionSyslogdFacility9  
  INTEGER as csOrionSyslogdFacility10  
  INTEGER as csOrionSyslogdFacility11  
  INTEGER as csOrionSyslogdFacility12  

CsOrionStatusPanelPortEntry  
SEQUENCE    
  Integer32 as csOrionStatusPanelPortIndex  
  SPPBaudRate as csOrionStatusPanelPortBaudRate  
  SPPLoopbackStatus as csOrionStatusPanelPortLoopback  
  SPPModemStatus as csOrionStatusPanelPortModemStatus  
  SPPRedundantStatus as csOrionStatusPanelPortRedundantStatus