CT-CMMPHYS-MIB

File: CT-CMMPHYS-MIB.mib (43768 bytes)

Imported modules

RFC-1212 RFC1213-MIB RFC1155-SMI
CTRON-MIB-NAMES CT-HSIMPHYS-MIB

Imported symbols

OBJECT-TYPE DisplayString ifIndex
IpAddress Counter Gauge
ctCMM mBusBoardID

Defined Objects

cmmModemInfo 1.3.6.1.4.1.52.4.1.1.18.1
OBJECT IDENTIFIER    

cmmBoardTable 1.3.6.1.4.1.52.4.1.1.18.1.1
A list of CMM boards present in this unit.
OBJECT-TYPE    
  SEQUENCE OF  
    CmmBoardEntry

cmmBoardEntry 1.3.6.1.4.1.52.4.1.1.18.1.1.1
A CMM board present in this unit.
OBJECT-TYPE    
  CmmBoardEntry  

cmmBoardType 1.3.6.1.4.1.52.4.1.1.18.1.1.1.1
The value of this object uniquely defines the CMM board type - a vendor's authoritative identification for a module. By convention, this value is allocated within the SMI enterprises subtree(1.3.6.1.4.1), and provides an easy and unambiguous means for determining the type of board.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

cmmNumModules 1.3.6.1.4.1.52.4.1.1.18.1.1.1.2
The value of this object is the number of CMM modules contained on this physical CMM circuit board.
OBJECT-TYPE    
  INTEGER  

cmmModuleNumModems 1.3.6.1.4.1.52.4.1.1.18.1.1.1.3
Number of modems per CMM module.
OBJECT-TYPE    
  INTEGER  

cmmTFTPServer 1.3.6.1.4.1.52.4.1.1.18.1.1.1.4
The value of this object is the IP address of the TFTP server where the object code for CMM modules resides. This object is persistent.
OBJECT-TYPE    
  IpAddress  

cmmUpgradePath 1.3.6.1.4.1.52.4.1.1.18.1.1.1.5
The value of this object is the path to the object code for CMM modules on the TFTP server. This object is persistent.
OBJECT-TYPE    
  DisplayString  

cmmUpgradeFlag 1.3.6.1.4.1.52.4.1.1.18.1.1.1.6
The value of this object is a flag that indicates whether or not to upgrade the software for the CMM modules on the board. This object is persistent.
OBJECT-TYPE    
  INTEGER true(1), false(2)  

cmmCommitFlag 1.3.6.1.4.1.52.4.1.1.18.1.1.1.7
The value of this object is a flag that indicates whether or not to commit the software for the CMM modules on the board. This object is persistent.
OBJECT-TYPE    
  INTEGER true(1), false(2)  

cmmModemResetLimit 1.3.6.1.4.1.52.4.1.1.18.1.1.1.8
The value of this object is the number of times that a modem can be reset within a given time span before it is declared to be faulty. If the value is 0 then the modem will never be declared faulty. This object is persistent.
OBJECT-TYPE    
  INTEGER  

cmmModemResetTime 1.3.6.1.4.1.52.4.1.1.18.1.1.1.9
The value of this object is the time span (in minutes) during which the given number of resets must occur before the modem is declared to be faulty. This object is persistent.
OBJECT-TYPE    
  INTEGER  

cmmOutgoingInactivityTimeout 1.3.6.1.4.1.52.4.1.1.18.1.1.1.10
The value of this object is the duration (in seconds) of a period of inactivity before an outgoing call is terminated. This object is persistent.
OBJECT-TYPE    
  INTEGER  

cmmIncomingInactivityTimeout 1.3.6.1.4.1.52.4.1.1.18.1.1.1.11
The value of this object is the duration (in seconds) of a period of inactivity before an incoming call is terminated. This object is persistent.
OBJECT-TYPE    
  INTEGER  

cmmAsyncBaseOrigATCmdStr 1.3.6.1.4.1.52.4.1.1.18.1.1.1.12
The value of this object is the default or base set of AT commands to be used when originating an async call.
OBJECT-TYPE    
  DisplayString  

cmmAsyncBaseAnswerATCmdStr 1.3.6.1.4.1.52.4.1.1.18.1.1.1.13
The value of this object is the default or base set of AT commands to be used when answering an async call.
OBJECT-TYPE    
  DisplayString  

cmmAsyncOrigStrModifier 1.3.6.1.4.1.52.4.1.1.18.1.1.1.14
The value of this object is a set of additional AT commands to be used when originating an async call. This object is persistent.
OBJECT-TYPE    
  DisplayString  

cmmAsyncAnswerStrModifier 1.3.6.1.4.1.52.4.1.1.18.1.1.1.15
The value of this object is a set of additional AT commands to be used when answering an async call. This object is persistent.
OBJECT-TYPE    
  DisplayString  

cmmAsyncOperOrigATCmdStr 1.3.6.1.4.1.52.4.1.1.18.1.1.1.16
The value of this object is the operative set of AT commands to be used when originating an async call. It includes the base string, the modifier string, and the call timeout value.
OBJECT-TYPE    
  DisplayString  

cmmAsyncOperAnswerATCmdStr 1.3.6.1.4.1.52.4.1.1.18.1.1.1.17
The value of this object is the operative set of AT commands to be used when answering an async call. It includes the base string, the modifier string, and the call timeout value.
OBJECT-TYPE    
  DisplayString  

cmmHdlcBaseOrigATCmdStr 1.3.6.1.4.1.52.4.1.1.18.1.1.1.18
The value of this object is the default or base set of AT commands to be used when originating an HDLC call.
OBJECT-TYPE    
  DisplayString  

cmmHdlcBaseAnswerATCmdStr 1.3.6.1.4.1.52.4.1.1.18.1.1.1.19
The value of this object is the default or base set of AT commands to be used when answering an HDLC call.
OBJECT-TYPE    
  DisplayString  

cmmHdlcOrigStrModifier 1.3.6.1.4.1.52.4.1.1.18.1.1.1.20
The value of this object is a set of additional AT commands to be used when originating an HDLC call. This object is persistent.
OBJECT-TYPE    
  DisplayString  

cmmHdlcAnswerStrModifier 1.3.6.1.4.1.52.4.1.1.18.1.1.1.21
The value of this object is a set of additional AT commands to be used when answering an HDLC call. This object is persistent.
OBJECT-TYPE    
  DisplayString  

cmmHdlcOperOrigATCmdStr 1.3.6.1.4.1.52.4.1.1.18.1.1.1.22
The value of this object is the operative set of AT commands to be used when originating an HDLC call. It includes the base string, the modifier string, and the call timeout value.
OBJECT-TYPE    
  DisplayString  

cmmHdlcOperAnswerATCmdStr 1.3.6.1.4.1.52.4.1.1.18.1.1.1.23
The value of this object is the operative set of AT commands to be used when answering an HDLC call. It includes the base string, the modifier string, and the call timeout value.
OBJECT-TYPE    
  DisplayString  

cmmBoardAdminStatus 1.3.6.1.4.1.52.4.1.1.18.1.1.1.24
The value of this object is the administrative status of the CMM board. down(1) -- all modems that belong to this board are to be removed from service immediately leave-service(2) -- each modem that belongs to this board is to be removed from service at the completion of its current call, if any up(3) -- each modem that belongs to this module is to become available for accepting calls upgrade(4) -- all modules that belong to this board are to be reloaded with new software and restarted
OBJECT-TYPE    
  INTEGER down(1), leave-service(2), up(3), upgrade(4)  

cmmBoardOperStatus 1.3.6.1.4.1.52.4.1.1.18.1.1.1.25
The value of this object is the operational status of the CMM board. initializing(1) -- all modules that belong to this board are booting up or in the process of a software upgrade active(2) -- all modules that belong to this board are available for accepting calls leaving-service(3) -- all modules that belong to this board are functional but are no longer available for accepting calls (Existing calls are allowed to terminate normally.) out-of-service(4) -- none of the modules that belong to this board are available for accepting calls nor do they have any existing calls faulty(5) -- all modules that belong to this board are unusable impaired(6) -- the board is otherwise active but one or more modules are in the out-of-service, initializing, testing, faulty, or impaired states
OBJECT-TYPE    
  INTEGER initializing(1), active(2), leaving-service(3), out-of-service(4), faulty(5), impaired(6)  

cmmModuleTable 1.3.6.1.4.1.52.4.1.1.18.1.2
A list of CMM modules present on each CMM board in this unit
OBJECT-TYPE    
  SEQUENCE OF  
    CmmModuleEntry

cmmModuleEntry 1.3.6.1.4.1.52.4.1.1.18.1.2.1
The value of this object is a CMM module that is present in this unit
OBJECT-TYPE    
  CmmModuleEntry  

cmmModuleID 1.3.6.1.4.1.52.4.1.1.18.1.2.1.1
The value of this object is an index that uniquely identifies the CMM module within the physical CMM board.
OBJECT-TYPE    
  INTEGER  

cmmDpramSize 1.3.6.1.4.1.52.4.1.1.18.1.2.1.2
Size of the DPRAM (in bytes) on the CMM module.
OBJECT-TYPE    
  INTEGER  

cmmSdramSize 1.3.6.1.4.1.52.4.1.1.18.1.2.1.3
Size of the SDRAM (in bytes) on the CMM module.
OBJECT-TYPE    
  INTEGER  

cmmCpuType 1.3.6.1.4.1.52.4.1.1.18.1.2.1.4
CPU type on the CMM module.
OBJECT-TYPE    
  INTEGER unknown(1), hitachish3(2), hitachish4(3)  

cmmCpuSpeed 1.3.6.1.4.1.52.4.1.1.18.1.2.1.5
The speed of the CPU (in Megahertz) on the CMM module.
OBJECT-TYPE    
  INTEGER  

cmmCpuFwRev 1.3.6.1.4.1.52.4.1.1.18.1.2.1.6
Revision of the CPU firmware on the CMM module. This code is a product of RSA.
OBJECT-TYPE    
  DisplayString  

cmmEpldId 1.3.6.1.4.1.52.4.1.1.18.1.2.1.7
EPLD ID on the CMM module. (Read from the Altera chip.)
OBJECT-TYPE    
  DisplayString  

cmmEpldRev 1.3.6.1.4.1.52.4.1.1.18.1.2.1.8
Revision of the EPLD firmware on the CMM module. This code is produced by Cabletron.
OBJECT-TYPE    
  DisplayString  

cmmNumBadModems 1.3.6.1.4.1.52.4.1.1.18.1.2.1.9
The value of this object is the number of bad modems on the CMM module.
OBJECT-TYPE    
  INTEGER  

cmmModuleAdminStatus 1.3.6.1.4.1.52.4.1.1.18.1.2.1.10
The value of this object is the administrative status of the CMM module. down(1) -- all modems that belong to this module are to be removed from service immediately leave-service(2) -- each modem that belongs to this module is to be removed from service at the completion of its current call, if any up(3) -- each modem that belongs to this module is to become available for accepting calls run-diagnostics(4) -- all modems that belong to this module are to run a series of comprehensive on-line diagnostic tests reset(5) -- the entire module is to be physically reset faulty(6) -- the entire module is to be immediately removed from service and considered unusable
OBJECT-TYPE    
  INTEGER down(1), leave-service(2), up(3), run-diagnostics(4), reset(5), faulty(6)  

cmmModuleOperStatus 1.3.6.1.4.1.52.4.1.1.18.1.2.1.11
The value of this object is the operational status of the CMM module. initializing(1) -- the module is booting up or in the process of a software upgrade active(2) -- all modems that belong to this module are available for accepting calls leaving-service(3) -- all modems that belong to this module are functional but are no longer available for accepting calls (Existing calls are allowed to terminate normally.) out-of-service(4) -- none of the modems that belong to this module are available for accepting calls nor do they have any existing calls faulty(5) -- the module has been removed from service by an NMS and is considered to be unusable impaired(6) -- the module is otherwise active but one or more modems are in the out-of-service, initializing, testing, or faulty states
OBJECT-TYPE    
  INTEGER initializing(1), active(2), leaving-service(3), out-of-service(4), faulty(5), impaired(6)  

cmmModemTable 1.3.6.1.4.1.52.4.1.1.18.1.3
A list of modems present on each CMM module on each CMM board in this unit
OBJECT-TYPE    
  SEQUENCE OF  
    CmmModemEntry

cmmModemEntry 1.3.6.1.4.1.52.4.1.1.18.1.3.1
This object contains data for a single CMM modem.
OBJECT-TYPE    
  CmmModemEntry  

cmmBoardID 1.3.6.1.4.1.52.4.1.1.18.1.3.1.1
This object contains the logical number of the CMM board to which the modem belongs.
OBJECT-TYPE    
  INTEGER  

cmmModemID 1.3.6.1.4.1.52.4.1.1.18.1.3.1.2
This object contains the logical number of the modem on the CMM module to which the modem belongs.
OBJECT-TYPE    
  INTEGER  

cmmIFNum 1.3.6.1.4.1.52.4.1.1.18.1.3.1.3
This object contains the number of the instance of the Interface MIB that is associated with this modem.
OBJECT-TYPE    
  INTEGER  

cmmSessionNum 1.3.6.1.4.1.52.4.1.1.18.1.3.1.4
This object contains the session number that is associated with this modem. Session numbers are assigned, starting with 1, from the first modem on the first module of the first CMM board and continuing through the last modem of the last module of the last CMM board.
OBJECT-TYPE    
  INTEGER  

cmmDdpPartNum 1.3.6.1.4.1.52.4.1.1.18.1.3.1.5
Part number of the DDP controller on the CMM module. (Read from the DDP chip.)
OBJECT-TYPE    
  DisplayString  

cmmDdpRevLevel 1.3.6.1.4.1.52.4.1.1.18.1.3.1.6
Revision level of the DDP controller on the CMM module. (Read from the DDP chip.)
OBJECT-TYPE    
  DisplayString  

cmmDdpFwRev 1.3.6.1.4.1.52.4.1.1.18.1.3.1.7
Revison of the DDP controller firmware on the CMM module. This code is produced by Rockwell.
OBJECT-TYPE    
  DisplayString  

cmmDDPInterrupts 1.3.6.1.4.1.52.4.1.1.18.1.3.1.8
This object contains the number of interrupts received by the CMM transfer manager since initialization.
OBJECT-TYPE    
  Counter  

cmmRxFlowCtlEvts 1.3.6.1.4.1.52.4.1.1.18.1.3.1.9
This object contains the number of received flow control events.
OBJECT-TYPE    
  Counter  

cmmTxFlowCtlEvts 1.3.6.1.4.1.52.4.1.1.18.1.3.1.10
This object contains the number of transmitted flow control events.
OBJECT-TYPE    
  Counter  

cmmCallStatus 1.3.6.1.4.1.52.4.1.1.18.1.3.1.11
This object contains the current call status.
OBJECT-TYPE    
  INTEGER idle(1), connected(2), retraining(3), dropping(4), local-test(5), remote-test(6)  

cmmCallOrigin 1.3.6.1.4.1.52.4.1.1.18.1.3.1.12
This object contains an enumerated value that indicates whether the call originated locally or remotely.
OBJECT-TYPE    
  INTEGER answer(1), originate(2)  

cmmRobbedBitDetected 1.3.6.1.4.1.52.4.1.1.18.1.3.1.13
This object contains the robbed bit signalling pattern that was detected by the modem or 0 if none.
OBJECT-TYPE    
  DisplayString  

cmmCorrectionType 1.3.6.1.4.1.52.4.1.1.18.1.3.1.14
This object contains an enumerated value that indicates the type of error correction that was negotiated.
OBJECT-TYPE    
  INTEGER no-ec(1), detection(2), mnp(3), hanging-up(4), speed-matching(5), lapm(6), mnp10(7)  

cmmCompressionType 1.3.6.1.4.1.52.4.1.1.18.1.3.1.15
This object contains an enumerated value that indicates the type of data compression that was negotiated.
OBJECT-TYPE    
  INTEGER none(1), mnp-class-5(2), v42bis-tx-only(3), v42bis-rx-only(4), v42bis(5)  

cmmRxRate 1.3.6.1.4.1.52.4.1.1.18.1.3.1.16
This object contains the current receive rate.
OBJECT-TYPE    
  INTEGER  

cmmTxRate 1.3.6.1.4.1.52.4.1.1.18.1.3.1.17
This object contains the current transmit rate.
OBJECT-TYPE    
  INTEGER  

cmmEncoding 1.3.6.1.4.1.52.4.1.1.18.1.3.1.18
This object contains the current PCM encoding type.
OBJECT-TYPE    
  INTEGER u-law(1), a-law(2)  

cmmFraming 1.3.6.1.4.1.52.4.1.1.18.1.3.1.19
This object contains the current framing type.
OBJECT-TYPE    
  INTEGER pseudo-framing(1), hdlc-framing(2), ppp-async(3)  

cmmInitialConnectRate 1.3.6.1.4.1.52.4.1.1.18.1.3.1.20
This object contains the initial connect rate (in BPS) or the session.
OBJECT-TYPE    
  INTEGER  

cmmMaxHostWindows 1.3.6.1.4.1.52.4.1.1.18.1.3.1.21
This object contains the maximum number of host windows.
OBJECT-TYPE    
  INTEGER  

cmmMaxCmmWindows 1.3.6.1.4.1.52.4.1.1.18.1.3.1.22
This object contains the maximum number of CMM windows.
OBJECT-TYPE    
  INTEGER  

cmmNumOutHostAcks 1.3.6.1.4.1.52.4.1.1.18.1.3.1.23
This object contains the number of host window acks that have not been processed by the CMM side.
OBJECT-TYPE    
  Gauge  

cmmNumOutCmmAcks 1.3.6.1.4.1.52.4.1.1.18.1.3.1.24
This object contains the number of CMM window acks that have not been processed by the host side.
OBJECT-TYPE    
  Gauge  

cmmToNetworkOctets 1.3.6.1.4.1.52.4.1.1.18.1.3.1.25
This object contains the number of data bytes transmitted (modem -> central office switch).
OBJECT-TYPE    
  Counter  

cmmFromNetworkOctets 1.3.6.1.4.1.52.4.1.1.18.1.3.1.26
This object contains the number of data bytes received (central office switch -> modem).
OBJECT-TYPE    
  Counter  

cmmToHostOctets 1.3.6.1.4.1.52.4.1.1.18.1.3.1.27
This object contains the number of data bytes transmitted (modem -> m-bus host).
OBJECT-TYPE    
  Counter  

cmmFromHostOctets 1.3.6.1.4.1.52.4.1.1.18.1.3.1.28
This object contains the number of data bytes received (m-bus host -> modem).
OBJECT-TYPE    
  Counter  

cmmToNetworkFrames 1.3.6.1.4.1.52.4.1.1.18.1.3.1.29
This object contains the number of frames transmitted (modem -> central office switch).
OBJECT-TYPE    
  Counter  

cmmFromNetworkFrames 1.3.6.1.4.1.52.4.1.1.18.1.3.1.30
This object contains the number of frames received (central office switch -> modem).
OBJECT-TYPE    
  Counter  

cmmOversizeFrames 1.3.6.1.4.1.52.4.1.1.18.1.3.1.31
This object contains the number of HDLC frames received that were greater than the maximum permissible size.
OBJECT-TYPE    
  Counter  

cmmOverrunErrors 1.3.6.1.4.1.52.4.1.1.18.1.3.1.32
This object contains the number of HDLC overrun errors.
OBJECT-TYPE    
  Counter  

cmmCRCErrors 1.3.6.1.4.1.52.4.1.1.18.1.3.1.33
This object contains the number of HDLC CRC errors.
OBJECT-TYPE    
  Counter  

cmmAbortedFrames 1.3.6.1.4.1.52.4.1.1.18.1.3.1.34
This object contains the number of HDLC frames that were aborted while they were being received.
OBJECT-TYPE    
  Counter  

cmmRetrainEvents 1.3.6.1.4.1.52.4.1.1.18.1.3.1.35
This object contains the number of times that retrain and renegotiation events have occurred since initialization.
OBJECT-TYPE    
  Counter  

cmmARAEvents 1.3.6.1.4.1.52.4.1.1.18.1.3.1.36
This object contains the number of times that automatic rate adaption events have occurred.
OBJECT-TYPE    
  Counter  

cmmARAFlag 1.3.6.1.4.1.52.4.1.1.18.1.3.1.37
This object contains a flag that indicates whether or not an ARA event has occurred during the current session.
OBJECT-TYPE    
  INTEGER true(1), false(2)  

cmmCarrierLossEvents 1.3.6.1.4.1.52.4.1.1.18.1.3.1.38
This object contains the number of times that carrier loss events have occurred.
OBJECT-TYPE    
  Counter  

cmmCarrierLossFlag 1.3.6.1.4.1.52.4.1.1.18.1.3.1.39
This object contains a flag that indicates whether or not a carrier loss event has occurred during the current session.
OBJECT-TYPE    
  INTEGER true(1), false(2)  

cmmRcvSignalLevel 1.3.6.1.4.1.52.4.1.1.18.1.3.1.40
This object contains the receive signal level.
OBJECT-TYPE    
  INTEGER  

cmmRcvSignalEQM 1.3.6.1.4.1.52.4.1.1.18.1.3.1.41
This object contains the receive signal EQM.
OBJECT-TYPE    
  INTEGER  

cmmTDMSlot 1.3.6.1.4.1.52.4.1.1.18.1.3.1.42
This object contains the number of the TDM slot used by this session.
OBJECT-TYPE    
  INTEGER  

cmmResetModemStats 1.3.6.1.4.1.52.4.1.1.18.1.3.1.43
This object is used to reset the statistics pertaining to the selected modem. If written with the value 'true', the statistics will be reset. If written with the value 'false', no action will be taken. Its value will always be read as 'false'.
OBJECT-TYPE    
  INTEGER true(1), false(2)  

cmmModemAdminStatus 1.3.6.1.4.1.52.4.1.1.18.1.3.1.44
This object contains the administrative status of a modem. down(1) -- the modem is to be removed from service immediately leave-service(2) -- the modem is to be removed from service at the completion of its current call, if any up(3) -- the modem is to become available for accepting calls run-diagnostics(4) -- the modem is to run a series of comprehensive on-line diagnostic tests reset(5) -- the modem is to be physically reset faulty(6) -- the modem is to be immediately removed from service and considered unusable
OBJECT-TYPE    
  INTEGER down(1), leave-service(2), up(3), run-diagnostics(4), reset(5), faulty(6)  

cmmModemOperStatus 1.3.6.1.4.1.52.4.1.1.18.1.3.1.45
This object contains the operational status of a modem. initializing(1) -- the module to which the modem belongs is booting up or in the process of a software upgrade idle(2) -- the modem is available for accepting calls but has no call in place active(3) -- the modem is not available for accepting calls because it already has one in place leaving-service(4) -- the modem is functional but is no longer available for accepting calls (Existing calls are allowed to terminate normally.) out-of-service(5) -- the modem is neither available for accepting calls nor does it have a call in place testing(6) -- the modem is running a series of comprehensive on-line diagnostic tests faulty(7) -- the modem has been removed from service by an NMS or due to a hardware or software failure and is considered to be unusable resetting(8) -- the modem is executing a reset sequence
OBJECT-TYPE    
  INTEGER initializing(1), idle(2), active(3), leaving-service(4), out-of-service(5), testing(6), faulty(7), resetting(8)  

cmmFreeFormAtCmdGroup 1.3.6.1.4.1.52.4.1.1.18.1.5
OBJECT IDENTIFIER    

cmmATCommand 1.3.6.1.4.1.52.4.1.1.18.1.5.1
This object contains the user-defined AT command string. It can contain up to 256 characters, including a carriage return that will automatically be inserted and a NULL terminator.
OBJECT-TYPE    
  OCTET STRING  

cmmSelectedModem 1.3.6.1.4.1.52.4.1.1.18.1.5.2
This object contains the ID of the modem to which the free-form AT command string should be sent.
OBJECT-TYPE    
  INTEGER  

cmmATCmdStatus 1.3.6.1.4.1.52.4.1.1.18.1.5.3
This object allows the free-form AT command string to be sent and allows the status of the command string to be examined.
OBJECT-TYPE    
  INTEGER sending(1), not-sending(2)  

cmmATCmdResult 1.3.6.1.4.1.52.4.1.1.18.1.5.4
This object contains the result string from issuing the free-form AT command .
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

Defined Objects

CmmBoardEntry  
SEQUENCE    
  OBJECT IDENTIFIER as cmmBoardType  
  INTEGER as cmmNumModules  
  INTEGER as cmmModuleNumModems  
  IpAddress as cmmTFTPServer  
  DisplayString as cmmUpgradePath  
  INTEGER as cmmUpgradeFlag  
  INTEGER as cmmCommitFlag  
  INTEGER as cmmModemResetLimit  
  INTEGER as cmmModemResetTime  
  INTEGER as cmmOutgoingInactivityTimeout  
  INTEGER as cmmIncomingInactivityTimeout  
  DisplayString as cmmAsyncBaseOrigATCmdStr  
  DisplayString as cmmAsyncBaseAnswerATCmdStr  
  DisplayString as cmmAsyncOrigStrModifier  
  DisplayString as cmmAsyncAnswerStrModifier  
  DisplayString as cmmAsyncOperOrigATCmdStr  
  DisplayString as cmmAsyncOperAnswerATCmdStr  
  DisplayString as cmmHdlcBaseOrigATCmdStr  
  DisplayString as cmmHdlcBaseAnswerATCmdStr  
  DisplayString as cmmHdlcOrigStrModifier  
  DisplayString as cmmHdlcAnswerStrModifier  
  DisplayString as cmmHdlcOperOrigATCmdStr  
  DisplayString as cmmHdlcOperAnswerATCmdStr  
  INTEGER as cmmBoardAdminStatus  
  INTEGER as cmmBoardOperStatus  

CmmModuleEntry  
SEQUENCE    
  INTEGER as cmmModuleID  
  INTEGER as cmmDpramSize  
  INTEGER as cmmSdramSize  
  INTEGER as cmmCpuType  
  INTEGER as cmmCpuSpeed  
  DisplayString as cmmCpuFwRev  
  DisplayString as cmmEpldId  
  DisplayString as cmmEpldRev  
  INTEGER as cmmNumBadModems  
  INTEGER as cmmModuleOperStatus  
  INTEGER as cmmModuleAdminStatus  

CmmModemEntry  
SEQUENCE    
  INTEGER as cmmBoardID  
  INTEGER as cmmModemID  
  INTEGER as cmmIFNum  
  INTEGER as cmmSessionNum  
  DisplayString as cmmDdpPartNum  
  DisplayString as cmmDdpRevLevel  
  DisplayString as cmmDdpFwRev  
  Counter as cmmDDPInterrupts  
  Counter as cmmRxFlowCtlEvts  
  Counter as cmmTxFlowCtlEvts  
  INTEGER as cmmCallStatus  
  INTEGER as cmmCallOrigin  
  DisplayString as cmmRobbedBitDetected  
  INTEGER as cmmCorrectionType  
  INTEGER as cmmCompressionType  
  INTEGER as cmmRxRate  
  INTEGER as cmmTxRate  
  INTEGER as cmmEncoding  
  INTEGER as cmmFraming  
  INTEGER as cmmInitialConnectRate  
  INTEGER as cmmMaxHostWindows  
  INTEGER as cmmMaxCmmWindows  
  Gauge as cmmNumOutHostAcks  
  Gauge as cmmNumOutCmmAcks  
  Counter as cmmToNetworkOctets  
  Counter as cmmFromNetworkOctets  
  Counter as cmmToHostOctets  
  Counter as cmmFromHostOctets  
  Counter as cmmToNetworkFrames  
  Counter as cmmFromNetworkFrames  
  Counter as cmmOversizeFrames  
  Counter as cmmOverrunErrors  
  Counter as cmmCRCErrors  
  Counter as cmmAbortedFrames  
  Counter as cmmRetrainEvents  
  Counter as cmmARAEvents  
  INTEGER as cmmARAFlag  
  Counter as cmmCarrierLossEvents  
  INTEGER as cmmCarrierLossFlag  
  INTEGER as cmmRcvSignalLevel  
  INTEGER as cmmRcvSignalEQM  
  INTEGER as cmmTDMSlot  
  INTEGER as cmmResetModemStats  
  INTEGER as cmmModemAdminStatus  
  INTEGER as cmmModemOperStatus