
| RFC-1212 | CXProduct-SMI |
| OBJECT-TYPE | Alias | cxCfgDot1dBase |
| cxCfgSrBase |
| cxCfgDot1dBaseNumOfDBFilterEntries | 1.3.6.1.4.1.495.2.1.6.14.1 | ||
| Determines the number of entries in the filtering database. Available RAM is the parameter. Range of Values: None Default Value: None Configuration Changed: Administrative | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| cxCfgDot1dBaseNumOfStaticDBFilterEntries | 1.3.6.1.4.1.495.2.1.6.14.2 | ||
| Determines the number of static entries in the filtering database. Available RAM is the parameter. Range of Values: None Default Value: None Configuration Changed: Administrative | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| cxCfgDot1dBasePortTable | 1.3.6.1.4.1.495.2.1.6.14.3 | ||
| A table that contains basic information about every port that is associated with this bridge. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| CxCfgDot1dBasePortEntry | |||
| cxCfgDot1dBasePortEntry | 1.3.6.1.4.1.495.2.1.6.14.3.1 | ||
| Contains configuration information for each port of the bridge. | |||
| OBJECT-TYPE | |||
| CxCfgDot1dBasePortEntry | |||
| cxCfgDot1dBasePort | 1.3.6.1.4.1.495.2.1.6.14.3.1.1 | ||
| Displays the port number. Options: The acceptable values depend on the type of device that you are configuring. In the CX900 architecture: 11, 21, 31, 41, 51, 61 or 71. The first digit identifies the slot number the I/O board resides in, the second digit identifies the number of the port on the I/O board. In the CX1000 architecture: Accepts only the value '1'. The LAN module only supports 1 port per I/O board. You distinguish between multiple I/O boards by specifying the slot number of the I/O board using another object. Default Value: 1 | |||
| OBJECT-TYPE | |||
| INTEGER | 1..65535 | ||
| cxCfgDot1dBasePortIfIndex | 1.3.6.1.4.1.495.2.1.6.14.3.1.2 | ||
| Displays the table row that contains configuration or monitoring objects for a specific type of physical interface. Range of Values: From 1 to the total number of entries in the Interface Table. Default Value: '0' indicates there is no corresponding entry in the Interface Table for this port. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| cxCfgDot1dBasePortSubnetworkSapAlias | 1.3.6.1.4.1.495.2.1.6.14.3.1.3 | ||
| Specifies a name (alias) for the physical or convergence port to which this port binds in order to establish a circuit for transmission. This value must match a physical or convergence port's alias, as defined by the cxLanIoPortAlias object in the cxLanIoPortTable or by the object cxConvPortAlias in the cxConvTable. Range of Values: From 1 to 32 alphanumeric characters. You can use any combination of letters and numbers however, you cannot use blank spaces. Use a dash or underscore as a delimiter. Default Value: LAN-PORT1 Configuration Changed: Administrative | |||
| OBJECT-TYPE | |||
| Alias | |||
| cxCfgDot1dBasePortRowStatus | 1.3.6.1.4.1.495.2.1.6.14.3.1.4 | ||
| Determines the status of the objects in a table row. Options: invalid (1): Row is flagged; after the next reset the values will be disabled and the row will be deleted from the table). valid (2): Values are enabled. Default value: valid (2) Configuration Changed: Administrative | |||
| OBJECT-TYPE | |||
| INTEGER | invalid(1), valid(2) | ||
| cxCfgDot1dBasePortState | 1.3.6.1.4.1.495.2.1.6.14.3.1.5 | ||
| Determines the state of the STP port. Options: On (1): The STP port is set to on. Off (2): The STP port is set to off. OnEther (3): The Ethernet STP port will bind to IP. OnToken (4): The Token Ring STP port will bind to IP. Default value: On (1) Configuration Changed: Administrative | |||
| OBJECT-TYPE | |||
| INTEGER | on(1), off(2), onether(3), ontoken(4) | ||
| cxCfgDot1dBasePortPriority | 1.3.6.1.4.1.495.2.1.6.14.3.1.6 | ||
| Determines the filtering/forwarding action and the forwarding priority for data sent from the STP bridge. Options: discard (1): Do not forward the data. forward (2): Forward the data. priority-low (3): Forward with a low priority (Frame Relay only). priority-high (4): Forward with a high priority (Frame Relay only). Default Value: forward (2) Configuration Changed: Administrative | |||
| OBJECT-TYPE | |||
| INTEGER | discard(1), forward(2), priority-low(3), priority-high(4) | ||
| cxCfgDot1dBaseMibLevel | 1.3.6.1.4.1.495.2.1.6.14.4 | ||
| Used to determine current MIB module release supported by the agent. Object is in decimal. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| cxCfgSrBasePortTable | 1.3.6.1.4.1.495.2.1.6.17.1 | ||
| A table that contains basic information about every port that is associated with this SR bridge. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| CxCfgSrBasePortEntry | |||
| cxCfgSrBasePortEntry | 1.3.6.1.4.1.495.2.1.6.17.1.1 | ||
| Configuration information for each port of the SR bridge. | |||
| OBJECT-TYPE | |||
| CxCfgSrBasePortEntry | |||
| cxCfgSrBasePort | 1.3.6.1.4.1.495.2.1.6.17.1.1.1 | ||
| Displays the port number. Options: The acceptable values depend on the type of device that you are configuring. In the CX 900 architecture: 11, 21, 31, 41, 51, 61 or 71. The first digit identifies the slot number the I/O board resides in, the second digit identifies the number of the port on the I/O board. In the CX 1000 architecture: Accepts only the value '1'. The LAN module only supports 1 port per I/O board. You distinguish between multiple I/O boards by specifying the slot number of the I/O board using another object. Default Value: 1 | |||
| OBJECT-TYPE | |||
| INTEGER | 1..65535 | ||
| cxCfgSrBasePortIfIndex | 1.3.6.1.4.1.495.2.1.6.17.1.1.2 | ||
| Displays the table row that contains configuration or monitoring objects for a specific type of physical interface. Range of Values: From 1 to the total number of entries in the Interface Table. Default Value: '0' indicates there is no corresponding entry in the Interface Table for this port. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| cxCfgSrBasePortSubnetworkSapAlias | 1.3.6.1.4.1.495.2.1.6.17.1.1.3 | ||
| Specifies a name (alias) for the physical or convergence port to which this SR port binds in order to establish a circuit for transmission. This value must match a physical or convergence port's alias as defined by the object cxLanIoPortAlias of the cxLanIoPortTable or by the object cxConvPortAlias of the cxConvTable. Range of Values: From 1 to 32 alphanumeric characters. You can use any combination of letters and numbers however, you cannot use blank spaces. Use a dash or underscore as a delimiter. Default Value: LAN-PORT1 Configuration Changed: Administrative | |||
| OBJECT-TYPE | |||
| Alias | |||
| cxCfgSrBasePortRowStatus | 1.3.6.1.4.1.495.2.1.6.17.1.1.4 | ||
| Determines the status of the objects in a table row. Options: invalid (1): Row is flagged. After the next reset the values will be disabled and the row will be deleted from the table. valid (2): Values are enabled. Default Value: (2) Configuration Changed: Administrative | |||
| OBJECT-TYPE | |||
| INTEGER | invalid(1), valid(2) | ||
| cxCfgSrBasePortState | 1.3.6.1.4.1.495.2.1.6.17.1.1.5 | ||
| Determines the state of the SR port. You can control activity at the port by changing this value. Options: on (1): The SR port is set to on. off (2): The SR port is set to off. OnToken (4): The Token Ring SR port will bind to IP. Default Value: (1) Configuration Changed: Administrative | |||
| OBJECT-TYPE | |||
| INTEGER | on(1), off(2), ontoken(3) | ||
| cxCfgSrBasePortPriority | 1.3.6.1.4.1.495.2.1.6.17.1.1.6 | ||
| Determines the filtering/forwarding action and the forwarding priority for data sent from the SR bridge. Options: discard (1): Do not forward the data. forward (2): Forward the data. priority-low (3): Forward with a low priority (Frame Relay only). priority-high (4): Forward with a high priority (Frame Relay only). Default value: (2) Configuration Changed: Administrative | |||
| OBJECT-TYPE | |||
| INTEGER | discard(1), forward(2), priority-low(3), priority-high(4) | ||
| CxCfgDot1dBasePortEntry | |||
| SEQUENCE | |||
| INTEGER as cxCfgDot1dBasePort | |||
| INTEGER as cxCfgDot1dBasePortIfIndex | |||
| Alias as cxCfgDot1dBasePortSubnetworkSapAlias | |||
| INTEGER as cxCfgDot1dBasePortRowStatus | |||
| INTEGER as cxCfgDot1dBasePortState | |||
| INTEGER as cxCfgDot1dBasePortPriority | |||
| CxCfgSrBasePortEntry | |||
| SEQUENCE | |||
| INTEGER as cxCfgSrBasePort | |||
| INTEGER as cxCfgSrBasePortIfIndex | |||
| Alias as cxCfgSrBasePortSubnetworkSapAlias | |||
| INTEGER as cxCfgSrBasePortRowStatus | |||
| INTEGER as cxCfgSrBasePortState | |||
| INTEGER as cxCfgSrBasePortPriority | |||