
CXLLCInterfaceModule-MIB
File:
CXLLCInterfaceModule-MIB.mib (6777 bytes)
Imported modules
Imported symbols
Defined Objects
| llcimConnectInterval |
1.3.6.1.4.1.495.2.1.6.34.1 |
| Determines the amount of time between LLC-2 XID or TEST retries. Range of Values: 10 - 900 seconds Default Value: 30 seconds Configuration Changed: administrative |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
10..900 |
|
| llcimSapEntry |
1.3.6.1.4.1.495.2.1.6.34.10.1 |
| Defines a row in the llcimSapTable. Each row contains the objects which define an LLC-2 service access point. |
| OBJECT-TYPE |
|
|
|
| |
LlcimSapEntry |
|
|
| llcimSapNumber |
1.3.6.1.4.1.495.2.1.6.34.10.1.1 |
| Identifies this SAP (service access point) with a numerical value. Values for each SAP must be unique. A value of '0' is automatically allocated to the first LLCIM upper SAP. This upper SAP row always exists and cannot be deleted. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..255 |
|
| llcimSapRowStatus |
1.3.6.1.4.1.495.2.1.6.34.10.1.2 |
| Determines the status of the objects in a table row. Options: invalid (1): Row is flagged, after next reset the values will be disabled and the row is deleted from the table valid (2): Values are enabled Default Value: none Configuration Changed: administrative |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
invalid(1), valid(2) |
|
| llcimSapAlias |
1.3.6.1.4.1.495.2.1.6.34.10.1.3 |
| Identifies this service access point by a textual name. Names must be unique across all service access points at all layers. Range of Values: 1 -16 alphanumeric characters (first character must be a letter) Default Value: none Configuration Changed: administrative |
| OBJECT-TYPE |
|
|
|
| |
Alias |
|
|
| llcimSapCompanionAlias |
1.3.6.1.4.1.495.2.1.6.34.10.1.4 |
| Determines the remote SAP this SAP communicates with. This object contains the textual name of the remote SAP. If this object is associated with a lower SAP, this object is set to the value of the corresponding LAPB/D MAC SAP Alias (lapbdMacSapAlias). The LAPB/D SAP must have the following objects defined as follows: labpdMacSapLapType set to 'lapb' lapbdMacSapLapBProtocolFlavor set to 'v8022' Range of Values: 1 -16 alphanumeric characters (first character must be a letter) Default Value: none Configuration Changed: administrative |
| OBJECT-TYPE |
|
|
|
| |
Alias |
|
|
| llcimSapType |
1.3.6.1.4.1.495.2.1.6.34.10.1.5 |
| Determines if this SAP (service access point) is an upper or lower SAP. Options: lower (1): This is a lower SAP, used to communicate with a LAPB/D MAC SAP. upper (2): This is an upper SAP, used to communicate with an upper layer service. Default Value: lower (1) Configuration Changed: administrative |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
lower(1), upper(2) |
|
| llcimSapConnectMethod |
1.3.6.1.4.1.495.2.1.6.34.10.1.6 |
| Determines if the NULL XID exchange used to establish an LLC link is initiated by this station or by the remote station. Options: generateXid (1): This station initiates the NULL XID exchange. waitForXid (2): This station waits for the other side to initiate the NULL XID exchange. Default Value: generateXid (1) Configuration Changed: administrative and operative |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
generateXid(1), waitForXid(2), immediate(3) |
|
| llcimSapState |
1.3.6.1.4.1.495.2.1.6.34.10.1.7 |
| Indicates the state of this service access point. Options: offLine (1): Indicates that the SAP is not configured. unbound (2): Indicates that this SAP is not bound to its companion SAP. notConnected (3): Indicates that the link is idle. testExchange (4): Indicates that the TEST exchange is ongoing. xidIssued (5): Indicates that this SAP has sent a NULL XID. waitXid (6): Indicates that this SAP is waiting for the remote to send a NULL XID. connected (7): Indicates that the link is established (TEST and XID exchanges has been successfully completed). setMode (8): Indicates that this SAP has sent a Set Mode command to the remote. waitSetMode (9): Indicates that this SAP is waiting for a Set Mode command from the remote. setModeReceived (10): Indicates that this SAP has received a Set Mode command from the remote. data (11): Indicates that data exchange mode has been reached. inLinkDisconnect (12): Indicates that the link has been disconnected (a DISC was received from the remote). outLinkDisconnect (13): Indicates that the link has been disconnected (a DISC was sent to the remote). outLineDisconnect (14) Indicates that the connection to the remote is being terminated. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
offLine(1), unbound(2), notConnected(3), testExchange(4), xidIssued(5), waitXid(6), connected(7), setMode(8), waitSetMode(9), setModeReceived(10), data(11), inLinkDisconnect(12), outLinkDisconnect(13), outLineDisconnect(14) |
|
Defined Objects
| LlcimSapEntry |
|
| SEQUENCE |
|
|
|
| |
INTEGER as llcimSapNumber |
|
|
| |
INTEGER as llcimSapRowStatus |
|
|
| |
Alias as llcimSapAlias |
|
|
| |
Alias as llcimSapCompanionAlias |
|
|
| |
INTEGER as llcimSapType |
|
|
| |
INTEGER as llcimSapConnectMethod |
|
|
| |
INTEGER as llcimSapState |
|
|