
| RFC-1212 | RFC1213-MIB | CXProduct-SMI |
| OBJECT-TYPE | DisplayString | cxV34 |
| SapIndex | Alias |
| v34SlotTable | 1.3.6.1.4.1.495.2.1.6.42.1 | ||
| Describes a table that contains configuration information about each V34 modem and its associated hardware port. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| V34SlotEntry | |||
| v34SlotEntry | 1.3.6.1.4.1.495.2.1.6.42.1.1 | ||
| Describes the configuration information applied to a specific V34 modem and its associated hardware port. | |||
| OBJECT-TYPE | |||
| V34SlotEntry | |||
| v34SlotNumber | 1.3.6.1.4.1.495.2.1.6.42.1.1.1 | ||
| Identifies a numerical value applied to the modem. Each device has a unique number. | |||
| OBJECT-TYPE | |||
| SapIndex | |||
| v34SlotAlias | 1.3.6.1.4.1.495.2.1.6.42.1.1.2 | ||
| Assigns a name used for the alias. Each modem requires a unique name. You may not assign the same name twice. Default Value: none Range of Values: Up to twelve alphanumeric characters, the first character must be alphabetic. Configuration Changed: operative | |||
| OBJECT-TYPE | |||
| Alias | |||
| v34SlotRowStatus | 1.3.6.1.4.1.495.2.1.6.42.1.1.3 | ||
| Determines the status of the objects in in a table row. Default Value: none Options: invalid (1): row is flagged, after next reset the values will be disabled and the row will be deleted from the table. valid (2): values are enabled Configuration Changed: administrative | |||
| OBJECT-TYPE | |||
| INTEGER | invalid(1), valid(2) | ||
| v34SlotStatus | 1.3.6.1.4.1.495.2.1.6.42.1.1.4 | ||
| Identifies the presence or absence of a V.34 modem in the slot and if present, whether it has failed initialization. Default Value: none Options: v34-not-present (1) v34-present (2) v34-present-failed (3) | |||
| OBJECT-TYPE | |||
| INTEGER | v34-not-present(1), v34-present(2), v34-present-failed(3) | ||
| v34SlotModemString | 1.3.6.1.4.1.495.2.1.6.42.1.1.5 | ||
| Determines a string to be sent to the modem upon initialization. Default Value: none Range of Values: 0-32 alphanumberic characters Configuration Changed: administrative | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..32) | ||
| v34SlotDialNumber | 1.3.6.1.4.1.495.2.1.6.42.1.1.6 | ||
| Specifies the number used to dial the remote modem. Default Value: none Range of Values: An octet string of 12 numeric characters Configuration Changed: administrative | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..20) | ||
| v34SlotAnswerMode | 1.3.6.1.4.1.495.2.1.6.42.1.1.7 | ||
| Determines whether the device will answer an incoming call. Default Value: answer-enabled (2) Options: answer-disabled (1) answer-enabled (2) test-mode (3) Configuration Changed: operative | |||
| OBJECT-TYPE | |||
| INTEGER | answer-disabled(1), answer-enabled(2), test-mode(3) | ||
| v34SlotSpeedStatus | 1.3.6.1.4.1.495.2.1.6.42.1.1.8 | ||
| Identifies the connection rate operative during the current dial call only. Default Value: none Options: speed-0-300 (1) speed-600 (2) speed-1200 (3) speed-2400 (4) speed-4800 (5) speed-7200 (6) speed-9600 (7) speed-12000 (8) speed-14400 (9) speed-16800 (10) speed-19200 (11) speed-21600 (12) speed-24000 (13) speed-26400 (14) speed-28800 (15) | |||
| OBJECT-TYPE | |||
| INTEGER | speed-0-300(1), speed-600(2), speed-1200(3), speed-2400(4), speed-4800(5), speed-7200(6), speed-9600(7), speed-12000(8), speed-14400(9), speed-16800(10), speed-19200(11), speed-21600(12), speed-24000(13), speed-26400(14), speed-28800(15) | ||
| v34SlotRetrainStatus | 1.3.6.1.4.1.495.2.1.6.42.1.1.9 | ||
| Identifies whether the modem is retraining or not. It is only applicable while the modem is on-line. Default Value: none Options: no-retraining (1) retraining (2) | |||
| OBJECT-TYPE | |||
| INTEGER | no-retraining(1), retraining(2) | ||
| v34SlotHookStatus | 1.3.6.1.4.1.495.2.1.6.42.1.1.10 | ||
| Identifies whether the modem is 'off-hook' (connected to the telephone line), or 'on-hook' (disconnected). Default Value: none Options: on-hook (1) off-hook (2) | |||
| OBJECT-TYPE | |||
| INTEGER | on-hook(1), off-hook(2) | ||
| v34SlotRingStatus | 1.3.6.1.4.1.495.2.1.6.42.1.1.11 | ||
| Identifies when the modem detects a ring signal from the telephone line. Default Value: none Options: no-ring (1) ring (2) | |||
| OBJECT-TYPE | |||
| INTEGER | no-ring(1), ring(2) | ||
| v34SlotDsrStatus | 1.3.6.1.4.1.495.2.1.6.42.1.1.12 | ||
| Identifies the data transfer state of the modem by the status of the Data Set Ready (DSR) signal . Default Value: none Options dsr-deasserted (1): data transfer inactive dsr-asserted (2): data transfer active | |||
| OBJECT-TYPE | |||
| INTEGER | dsr-deasserted(1), dsr-asserted(2) | ||
| v34SlotDtrStatus | 1.3.6.1.4.1.495.2.1.6.42.1.1.13 | ||
| Identifies the status of the Data Terminal Ready (DTR) signal that the motherboard uses to dial the pre-stored phone number (if in originate mode) or to enable auto answer (if in answer mode). Default Value: none Options: dtr-deasserted (1) dtr-asserted (2) | |||
| OBJECT-TYPE | |||
| INTEGER | dtr-deasserted(1), dtr-asserted(2) | ||
| v34SlotModel | 1.3.6.1.4.1.495.2.1.6.42.1.1.14 | ||
| Identifies the model number of the Printed Circuit Board (PCB) as an integer value from 0 to 7. Default Value: none Range of Values: 0-7 | |||
| OBJECT-TYPE | |||
| INTEGER | 0..7 | ||
| v34SlotRevision | 1.3.6.1.4.1.495.2.1.6.42.1.1.15 | ||
| Identifies the revision number of the PCB as an integer value from 0 to 15. Default Value: none Range of Values: 0-15 | |||
| OBJECT-TYPE | |||
| INTEGER | 0..15 | ||
| v34SlotEco | 1.3.6.1.4.1.495.2.1.6.42.1.1.16 | ||
| Identifies the Engineering Change Order (ECO) level of the PCB as an integer value from 0 to 15. Default Value: none Range of Values: 0-15 | |||
| OBJECT-TYPE | |||
| INTEGER | 0..15 | ||
| V34SlotEntry | |||
| SEQUENCE | |||
| SapIndex as v34SlotNumber | |||
| Alias as v34SlotAlias | |||
| INTEGER as v34SlotRowStatus | |||
| INTEGER as v34SlotStatus | |||
| INTEGER as v34SlotAnswerMode | |||
| DisplayString as v34SlotModemString | SIZE(0..32) | ||
| DisplayString as v34SlotDialNumber | |||
| INTEGER as v34SlotSpeedStatus | |||
| INTEGER as v34SlotRetrainStatus | |||
| INTEGER as v34SlotHookStatus | |||
| INTEGER as v34SlotRingStatus | |||
| INTEGER as v34SlotDsrStatus | |||
| INTEGER as v34SlotDtrStatus | |||
| INTEGER as v34SlotModel | |||
| INTEGER as v34SlotRevision | |||
| INTEGER as v34SlotEco | |||