
CXVSHELL-MIB
File:
CXVSHELL-MIB.mib (3287 bytes)
Imported modules
Imported symbols
Defined Objects
| cxVShell |
1.3.6.1.4.1.495.2.1.1.3 |
| OBJECT IDENTIFIER |
|
|
|
| voxCardsMapTable |
1.3.6.1.4.1.495.2.1.1.3.1 |
| Voice cards associations with I/O slots numbers. The voice card number corresponds to the slot number: voice card 1 is always associated with slot number 1, voice card 2 is always associated with slot number 2 and so on. |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
VoxCardsMapEntry |
|
| voxCardsMapEntry |
1.3.6.1.4.1.495.2.1.1.3.1.1 |
| Each row associates a voice card number to an I/O slot number. |
| OBJECT-TYPE |
|
|
|
| |
VoxCardsMapEntry |
|
|
| voxCardNo |
1.3.6.1.4.1.495.2.1.1.3.1.1.1 |
| Displays the voice I/O card number that is enabled. Range of Values: a single digit from 1 to 8 Default Value: none |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..8 |
|
| voxSlotNo |
1.3.6.1.4.1.495.2.1.1.3.1.1.2 |
| Determines the I/O slot number. Range of Values: a single digit from 1 to 8 Default Value: none Configuration Changed: administrative |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..8 |
|
| voxConnStatus |
1.3.6.1.4.1.495.2.1.1.3.1.1.3 |
| Displays whether a voice I/O card-to-slot number association has been successful at the VCE layer. Options: recorded-in-config (1): configuration is correct but has not yet been implemeted. System reset required. failed (2): configuration not performed correctly. The configuration may have the correct syntax but the change cannot be implemented at the VCE layer because there is no voice I/O card in the requested slot. If the requested slot is currently occupied by another kind of I/O card, for example an Ethernet card, the same result will occur. connected (3): configuration performed properly and association made. DefaultValue: none |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
recorded-in-config(1), failed(2), connected(3) |
|
| voxCardRowStatus |
1.3.6.1.4.1.495.2.1.1.3.1.1.4 |
| Determines the status of the objects in a table row. Options: invalid (1): row is flagged; after the next reset the values will be disabled and the row will be deleted from the table. valid (2): values are enabled. DefaultValue: none Configuration Changed: administrative |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
invalid(1), valid(2) |
|
| cxvshellMibLevel |
1.3.6.1.4.1.495.2.1.1.3.2 |
| Used to determine current MIB module release supported by the agent. Object is in decimal. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
Defined Objects
| VoxCardsMapEntry |
|
| SEQUENCE |
|
|
|
| |
INTEGER as voxCardNo |
|
|
| |
INTEGER as voxSlotNo |
|
|
| |
INTEGER as voxConnStatus |
|
|
| |
INTEGER as voxCardRowStatus |
|
|