DECATM-MIB

File: DECATM-MIB.mib (39867 bytes)

Imported modules

RFC1155-SMI RFC-1212

Imported symbols

enterprises OBJECT-TYPE

Defined Objects

dec 1.3.6.1.4.1.36
OBJECT IDENTIFIER    

ema 1.3.6.1.4.1.36.2
OBJECT IDENTIFIER    

sysobjid 1.3.6.1.4.1.36.2.15
OBJECT IDENTIFIER    

atmSwitch 1.3.6.1.4.1.36.2.15.14
OBJECT IDENTIFIER    

atmSwitch1 1.3.6.1.4.1.36.2.15.14.1
OBJECT IDENTIFIER    

atmversion1 1.3.6.1.4.1.36.2.15.14.1.1
OBJECT IDENTIFIER    

atmSwitch2 1.3.6.1.4.1.36.2.15.14.2
OBJECT IDENTIFIER    

atmversion2 1.3.6.1.4.1.36.2.15.14.2.1
OBJECT IDENTIFIER    

decMIBextension 1.3.6.1.4.1.36.2.18
OBJECT IDENTIFIER    

atmExpand 1.3.6.1.4.1.36.2.18.17
OBJECT IDENTIFIER    


adUID 1.3.6.1.4.1.36.2.18.17.1.1
48 bit User Identification number assigned to the ATM device.
OBJECT-TYPE    
  OCTET STRING  

adEscapeSupport 1.3.6.1.4.1.36.2.18.17.1.2
Indicates if the VCI 16 can be used to carry configuration management traffic with a escape sequence 0x55 (instead of SNMP ASN.1 header).
OBJECT-TYPE    
  INTEGER supported(1), none(2)  

adFlowMaster 1.3.6.1.4.1.36.2.18.17.1.3
Indicates if FLOWmaster flow control is supported on this device.
OBJECT-TYPE    
  INTEGER supported(1), none(2)  

adRVC 1.3.6.1.4.1.36.2.18.17.1.4
Indicates if Resilient Virtual Circuits (RVCs) are supported on this device.
OBJECT-TYPE    
  INTEGER supported(1), none(2)  

adObjectId 1.3.6.1.4.1.36.2.18.17.1.5
Switch, none, unknown.
OBJECT-TYPE    
  INTEGER  

adObjectSubId 1.3.6.1.4.1.36.2.18.17.1.6
an3, an2, none, unknown.
OBJECT-TYPE    
  INTEGER  

adNumPorts 1.3.6.1.4.1.36.2.18.17.1.7
Indicates number of ATM ports on this device. adNumLinks is the number of rows in the adPortTable.
OBJECT-TYPE    
  INTEGER  

adPortTable 1.3.6.1.4.1.36.2.18.17.1.8
A list of the link attributes on a per port basis. The number of entries is given in adNumPorts.
OBJECT-TYPE    
  SEQUENCE OF  
    AdPortTableEntry

adPortTableEntry 1.3.6.1.4.1.36.2.18.17.1.8.1
Contains the characteristics of ATM ports.
OBJECT-TYPE    
  AdPortTableEntry  

adpPortIndex 1.3.6.1.4.1.36.2.18.17.1.8.1.1
A unique value which identifies the ATM Port Number. The value 0 has a special meaning and identifies the local port
OBJECT-TYPE    
  INTEGER  

adpType 1.3.6.1.4.1.36.2.18.17.1.8.1.2
Type: qlv1, none, unknown.
OBJECT-TYPE    
  INTEGER  

adpSubType 1.3.6.1.4.1.36.2.18.17.1.8.1.3
Subtye: ver0, none, unknown.
OBJECT-TYPE    
  INTEGER  

adpFlowMaster 1.3.6.1.4.1.36.2.18.17.1.8.1.4
Indicates if FLOWmaster flow control is supported on this device.
OBJECT-TYPE    
  INTEGER none(1), supported(2)  

adpCreditResync 1.3.6.1.4.1.36.2.18.17.1.8.1.5
The type of the credit resynchronization used by the flow control on this link.
OBJECT-TYPE    
  INTEGER unknown(1), none(2), an2Style(3)  

adpResyncVCI 1.3.6.1.4.1.36.2.18.17.1.8.1.6
The VCI used to send credit resynchronization requests and response cells.
OBJECT-TYPE    
  INTEGER  

adpReceiveBuffers 1.3.6.1.4.1.36.2.18.17.1.8.1.7
The amount of buffering available on this port in cells.
OBJECT-TYPE    
  INTEGER  

adpPVCMin 1.3.6.1.4.1.36.2.18.17.1.8.1.8
The lowest VCI value which can be assigned for PVCs.
OBJECT-TYPE    
  INTEGER  

adpPVCMax 1.3.6.1.4.1.36.2.18.17.1.8.1.9
The highest VCI value which can be assigned for PVCs.
OBJECT-TYPE    
  INTEGER  

adpSVCMin 1.3.6.1.4.1.36.2.18.17.1.8.1.10
The lowest VCI value which can be assigned for SVCs.
OBJECT-TYPE    
  INTEGER  

adpSVCMax 1.3.6.1.4.1.36.2.18.17.1.8.1.11
The highest VCI value which can be assigned for SVCs.
OBJECT-TYPE    
  INTEGER  

adpRVCMin 1.3.6.1.4.1.36.2.18.17.1.8.1.12
The lowest VCI value which can be assigned for RVCs.
OBJECT-TYPE    
  INTEGER  

adpRVCMax 1.3.6.1.4.1.36.2.18.17.1.8.1.13
The highest VCI value which can be assigned for RVCs.
OBJECT-TYPE    
  INTEGER  

adpBroadcastVCI 1.3.6.1.4.1.36.2.18.17.1.8.1.14
The VCI used for broadcast on this port. The value of 2 will be used to be UNI compliant.
OBJECT-TYPE    
  INTEGER  

adpArpVCI 1.3.6.1.4.1.36.2.18.17.1.8.1.15
The VCI used to resolve addresses (ARP broadcasts). adpArpVCI will have a value of 2 in UNI compliant implementations.
OBJECT-TYPE    
  INTEGER  

adpHomeVCI 1.3.6.1.4.1.36.2.18.17.1.8.1.16
The Home VCI .
OBJECT-TYPE    
  INTEGER  

adpMaxReceiveBufferCounter 1.3.6.1.4.1.36.2.18.17.1.8.1.17
Although the transmitter can allocate the adpReciveBuffers however it wants to VCs, it will not allocate more than adpMaxReciveBufferCounter to any individual VC
OBJECT-TYPE    
  INTEGER  

adpUsedReceiveBuffers 1.3.6.1.4.1.36.2.18.17.1.8.1.18
The current number of of free buffers for the link
OBJECT-TYPE    
  INTEGER  

adpRemoteFlowMaster 1.3.6.1.4.1.36.2.18.17.1.8.1.19
Indicates if FLOWmaster flow control is supported on this device.
OBJECT-TYPE    
  INTEGER supported(1), none(2)  

adpOutputBandwidth 1.3.6.1.4.1.36.2.18.17.1.8.1.20
Total CBR output bandwidth in cells per second
OBJECT-TYPE    
  INTEGER  

adpAvailableOutputBandwidth 1.3.6.1.4.1.36.2.18.17.1.8.1.21
Available CBR output bandwidth in cells per second
OBJECT-TYPE    
  INTEGER  

dxatm 1.3.6.1.4.1.36.2.18.17.2
OBJECT IDENTIFIER    

dxatmPvcTable 1.3.6.1.4.1.36.2.18.17.2.1
The point-to-point ATM PVC Cross Connect table. A bi-directional PVC cross-connect which cross-connects two end points (i.e., VCLs) is modeled as one entry in this table.
OBJECT-TYPE    
  SEQUENCE OF  
    DxatmPvcEntry

dxatmPvcEntry 1.3.6.1.4.1.36.2.18.17.2.1.1
similar to atm mib description
OBJECT-TYPE    
  DxatmPvcEntry  

dxatmPvcLowIfIndex 1.3.6.1.4.1.36.2.18.17.2.1.1.1
The value of this object is equal to MIB II's ifIndex value of the ATM interface port for this cross-connect. The term low implies that this ATM interface has the numerically lower ifIndex value than the other ATM interface identified in the same dxatmPvcEntry.
OBJECT-TYPE    
  INTEGER  

dxatmPvcLowVpi 1.3.6.1.4.1.36.2.18.17.2.1.1.2
The value of this object is equal to the VPI value at the ATM interface associated with the cross-connect that is identified by dxatmPvcLowIfIndex. The VPI value cannot exceed the number supported by the atmInterfaceMaxVpiBits at the low ATM interface port.
OBJECT-TYPE    
  INTEGER 1..4095  

dxatmPvcLowVci 1.3.6.1.4.1.36.2.18.17.2.1.1.3
The value of this object is equal to the VCI value at the ATM interface associated with the cross-connect that is identified by dxatmPvcLowIfIndex. The VPI value cannot exceed the number supported by the atmInterfaceMaxVciBits at the low ATM interface port.
OBJECT-TYPE    
  INTEGER 1..4095  

dxatmPvcHighIfIndex 1.3.6.1.4.1.36.2.18.17.2.1.1.4
The value of this object is equal to MIB II's ifIndex value of the ATM interface port for this cross-connect. The term high implies that this ATM interface has the numerically higher ifIndex value than the other ATM interface identified in the same dxatmPvcEntry.
OBJECT-TYPE    
  INTEGER  

dxatmPvcHighVpi 1.3.6.1.4.1.36.2.18.17.2.1.1.5
The value of this object is equal to the VPI value at the ATM interface associated with the cross-connect that is identified by dxatmPvcHighIfIndex. The VPI value cannot exceed the number supported by the atmInterfaceMaxVpiBits at the high ATM interface port.
OBJECT-TYPE    
  INTEGER 1..4095  

dxatmPvcHighVci 1.3.6.1.4.1.36.2.18.17.2.1.1.6
The value of this object is equal to the VCI value at the ATM interface associated with the cross-connect that is identified by dxatmPvcHighIfIndex. The VPI value cannot exceed the number supported by the atmInterfaceMaxVciBits at the high ATM interface port.
OBJECT-TYPE    
  INTEGER 1..4095  

dxatmPvcAdminStatus 1.3.6.1.4.1.36.2.18.17.2.1.1.7
The value of this object identifies the desired administrative status of this bi-directional cross-connect. The up and down states indicate that the traffic flow is enabled and disabled respectively on this VP cross-connect.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

dxatmPvcL2HOperStatus 1.3.6.1.4.1.36.2.18.17.2.1.1.8
The value of this object identifies the current operational status of the cross-connect in one direction; (i.e., from the low to high direction). The up and down states indicate that this cross-connect from low to high direction is operational or not operational respectively. The unknown state indicates that the state of it cannot be determined.
OBJECT-TYPE    
  INTEGER up(1), down(2), unknown(3)  

dxatmPvcH2LOperStatus 1.3.6.1.4.1.36.2.18.17.2.1.1.9
The value of this object identifies the current operational status of the cross-connect in one direction; (i.e., from the high to low direction). The up and down states indicate that this cross-connect from high to low direction is operational or not operational respectively. The unknown state indicates that the state of it cannot be determined.
OBJECT-TYPE    
  INTEGER up(1), down(2), unknown(3)  

dxatmPvcL2HFCStatus 1.3.6.1.4.1.36.2.18.17.2.1.1.10
The value of this object identifies the current status of the flow control mecahnism across cross-connect in one direction; (i.e., from the low to high direction). The enabled and disabled states indicate that this flow control from low to high direction is operational or not operational respectively. The notApplicable state indicates that traffic in this direction is not subject to flow control.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), notApplicable(3)  

dxatmPvcH2LFCStatus 1.3.6.1.4.1.36.2.18.17.2.1.1.11
The value of this object identifies the current status of the flow control mecahnism across cross-connect in one direction; (i.e., from the high to low direction). The enabled and disabled states indicate that this flow control from high to low direction is operational or not operational respectively. The notApplicable state indicates that traffic in this direction is not subject to flow control.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), notApplicable(3)  

dxatmPvcL2HTrafficDescriptorType 1.3.6.1.4.1.36.2.18.17.2.1.1.12
The type of traffic management, aplicable to the L2H direction of this PVC. The type may indicate none, or a type with one or more parameters. These parameters are specified as a parameter vector, in the corresponding instances of the objects: dxatmPvcL2HTrafficDescriptorParam1, dxatmPvcL2HTrafficDescriptorParam2, dxatmPvcL2HTrafficDescriptorParam3, dxatmPvcL2HTrafficDescriptorParam4, and dxatmPvcL2HTrafficDescriptorParam5.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

dxatmPvcL2HTrafficDescriptorParam1 1.3.6.1.4.1.36.2.18.17.2.1.1.13
The first parameter of the L2H parameter vector for this PVC, used according to the value of dxatmPvcL2HTrafficDescriptorType.
OBJECT-TYPE    
  INTEGER 0..2147483647  

dxatmPvcL2HTrafficDescriptorParam2 1.3.6.1.4.1.36.2.18.17.2.1.1.14
The second parameter of the L2H parameter vector for this PVC, used according to the value of dxatmPvcL2HTrafficDescriptorType.
OBJECT-TYPE    
  INTEGER 0..2147483647  

dxatmPvcL2HTrafficDescriptorParam3 1.3.6.1.4.1.36.2.18.17.2.1.1.15
The third parameter of the L2H parameter vector for this PVC, used according to the value of dxatmPvcL2HTrafficDescriptorType.
OBJECT-TYPE    
  INTEGER 0..2147483647  

dxatmPvcL2HTrafficDescriptorParam4 1.3.6.1.4.1.36.2.18.17.2.1.1.16
The fourth parameter of the L2H parameter vector for this PVC, used according to the value of dxatmPvcL2HTrafficDescriptorType.
OBJECT-TYPE    
  INTEGER 0..2147483647  

dxatmPvcL2HTrafficDescriptorParam5 1.3.6.1.4.1.36.2.18.17.2.1.1.17
The fifth parameter of the L2H parameter vector for this PVC, used according to the value of dxatmPvcL2HTrafficDescriptorType.
OBJECT-TYPE    
  INTEGER 0..2147483647  

dxatmPvcH2LTrafficDescriptorType 1.3.6.1.4.1.36.2.18.17.2.1.1.18
The type of traffic management, aplicable to the H2L direction of this PVC. The type may indicate none, or a type with one or more parameters. These parameters are specified as a parameter vector, in the corresponding instances of the objects: dxatmPvcH2LTrafficDescriptorParam1, dxatmPvcH2LTrafficDescriptorParam2, dxatmPvcH2LTrafficDescriptorParam3, dxatmPvcH2LTrafficDescriptorParam4, and dxatmPvcH2LTrafficDescriptorParam5.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

dxatmPvcH2LTrafficDescriptorParam1 1.3.6.1.4.1.36.2.18.17.2.1.1.19
The first parameter of the H2L parameter vector for this PVC, used according to the value of dxatmPvcH2LTrafficDescriptorType.
OBJECT-TYPE    
  INTEGER 0..2147483647  

dxatmPvcH2LTrafficDescriptorParam2 1.3.6.1.4.1.36.2.18.17.2.1.1.20
The second parameter of the H2L parameter vector for this PVC, used according to the value of dxatmPvcH2LTrafficDescriptorType.
OBJECT-TYPE    
  INTEGER 0..2147483647  

dxatmPvcH2LTrafficDescriptorParam3 1.3.6.1.4.1.36.2.18.17.2.1.1.21
The third parameter of the H2L parameter vector for this PVC, used according to the value of dxatmPvcH2LTrafficDescriptorType.
OBJECT-TYPE    
  INTEGER 0..2147483647  

dxatmPvcH2LTrafficDescriptorParam4 1.3.6.1.4.1.36.2.18.17.2.1.1.22
The fourth parameter of the H2L parameter vector for this PVC, used according to the value of dxatmPvcH2LTrafficDescriptorType.
OBJECT-TYPE    
  INTEGER 0..2147483647  

dxatmPvcH2LTrafficDescriptorParam5 1.3.6.1.4.1.36.2.18.17.2.1.1.23
The fifth parameter of the H2L parameter vector for this PVC, used according to the value of dxatmPvcH2LTrafficDescriptorType.
OBJECT-TYPE    
  INTEGER 0..2147483647  

dxatmPvcL2HQoSClass 1.3.6.1.4.1.36.2.18.17.2.1.1.24
The QoS Class, as defined in section 4 of Apendix A, for the L2H direction of this PVC connection at the local UNI.
OBJECT-TYPE    
  INTEGER  

dxatmPvcH2LQoSClass 1.3.6.1.4.1.36.2.18.17.2.1.1.25
The QoS Class, as defined in section 4 of Apendix A, for the H2L direction of this PVC connection at the local UNI.
OBJECT-TYPE    
  INTEGER  

dxatmPvcRowStatus 1.3.6.1.4.1.36.2.18.17.2.1.1.26
This object is used to create a new row or modify or delete an existing row in this table.
OBJECT-TYPE    
  INTEGER  

dxatmPvcMpTable 1.3.6.1.4.1.36.2.18.17.2.2
The ATM Multipoint PVC Cross Connect table. A point-to-multipoint PVC cross-connect is modeled as a set of entries in this table having a common root and multiple leaves.
OBJECT-TYPE    
  SEQUENCE OF  
    DxatmPvcMpEntry

dxatmPvcMpEntry 1.3.6.1.4.1.36.2.18.17.2.2.1
similar to atm mib description
OBJECT-TYPE    
  DxatmPvcMpEntry  

dxatmPvcMpRootIfIndex 1.3.6.1.4.1.36.2.18.17.2.2.1.1
The value of this object is equal to MIB II's ifIndex value of the ATM interface port for the root end of the multipoint cross-connect.
OBJECT-TYPE    
  INTEGER  

dxatmPvcMpRootVpi 1.3.6.1.4.1.36.2.18.17.2.2.1.2
The value of this object is equal to the VPI value at the ATM interface associated with the cross-connect that is identified by dxatmPvcMpRootIfIndex. The VPI value cannot exceed the number supported by the atmInterfaceMaxVpiBits at the Root ATM interface port.
OBJECT-TYPE    
  INTEGER 1..4095  

dxatmPvcMpRootVci 1.3.6.1.4.1.36.2.18.17.2.2.1.3
The value of this object is equal to the VCI value at the ATM interface associated with the cross-connect that is identified by dxatmPvcMpRootIfIndex. The VCI value cannot exceed the number supported by the atmInterfaceMaxVciBits at the Root ATM interface port.
OBJECT-TYPE    
  INTEGER 1..4095  

dxatmPvcMpLeafIfIndex 1.3.6.1.4.1.36.2.18.17.2.2.1.4
The value of this object is equal to MIB II's ifIndex value of the ATM interface port for the leaf end of the multipoint cross-connect.
OBJECT-TYPE    
  INTEGER  

dxatmPvcMpLeafVpi 1.3.6.1.4.1.36.2.18.17.2.2.1.5
The value of this object is equal to the VPI value at the ATM interface associated with the cross-connect that is identified by dxatmPvcMpLeafIfIndex. The VPI value cannot exceed the number supported by the atmInterfaceMaxVpiBits at the Leaf ATM interface port.
OBJECT-TYPE    
  INTEGER 1..4095  

dxatmPvcMpLeafVci 1.3.6.1.4.1.36.2.18.17.2.2.1.6
The value of this object is equal to the VCI value at the ATM interface associated with the cross-connect that is identified by dxatmPvcMpLeafIfIndex. The VPI value cannot exceed the number supported by the atmInterfaceMaxVciBits at the Leaf ATM interface port.
OBJECT-TYPE    
  INTEGER 1..4095  

dxatmPvcMpAdminStatus 1.3.6.1.4.1.36.2.18.17.2.2.1.7
The value of this object identifies the desired administrative status of this point-to-multipoint cross-connect branch. The up and down states indicate that the traffic is enabled and disabled respectively on this branch of the cross-connect.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

dxatmPvcMpOperStatus 1.3.6.1.4.1.36.2.18.17.2.2.1.8
The value of this object identifies the current operational status of this branch of the point-to- multipoint cross-connect. The up and down states indicate that this branch of cross-connect is operational or not operational respectively. The unknown state indicates that the state of it cannot be determined.
OBJECT-TYPE    
  INTEGER up(1), down(2), unknown(3)  

dxatmPvcMpFCStatus 1.3.6.1.4.1.36.2.18.17.2.2.1.9
The value of this object identifies the current status of the flow control mecahnism across PM. The enabled and disabled states indicate that this flow control is operational or not operational respectively. The notApplicable state indicates that traffic is not subject to flow control.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), notApplicable(3)  

dxatmPvcMpTrafficDescriptorType 1.3.6.1.4.1.36.2.18.17.2.2.1.10
The type of traffic management, aplicable to the transmit from Root to Leaf. The type may indicate none, or a type with one or more parameters. These parameters are specified as a parameter vector, in the corresponding instances of the objects: dxatmPvcMpTrafficDescriptorParam1, dxatmPvcMpTrafficDescriptorParam2, dxatmPvcMpTrafficDescriptorParam3, dxatmPvcMpTrafficDescriptorParam4, and dxatmPvcMpTrafficDescriptorParam5.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

dxatmPvcMpTrafficDescriptorParam1 1.3.6.1.4.1.36.2.18.17.2.2.1.11
The first parameter of the parameter vector for this PvcMp, used according to the value of dxatmPvcMpTrafficDescriptorType.
OBJECT-TYPE    
  INTEGER 0..2147483647  

dxatmPvcMpTrafficDescriptorParam2 1.3.6.1.4.1.36.2.18.17.2.2.1.12
The second parameter of the parameter vector for this PvcMp, used according to the value of dxatmPvcMpTrafficDescriptorType.
OBJECT-TYPE    
  INTEGER 0..2147483647  

dxatmPvcMpTrafficDescriptorParam3 1.3.6.1.4.1.36.2.18.17.2.2.1.13
The third parameter of the parameter vector for this PvcMp, used according to the value of dxatmPvcMpTrafficDescriptorType.
OBJECT-TYPE    
  INTEGER 0..2147483647  

dxatmPvcMpTrafficDescriptorParam4 1.3.6.1.4.1.36.2.18.17.2.2.1.14
The fifth parameter of the parameter vector for this PvcMp, used according to the value of dxatmPvcMpTrafficDescriptorType.
OBJECT-TYPE    
  INTEGER 0..2147483647  

dxatmPvcMpTrafficDescriptorParam5 1.3.6.1.4.1.36.2.18.17.2.2.1.15
The fifth parameter of the parameter vector for this PvcMp, used according to the value of dxatmPvcMpXmtTrafficDescriptorType.
OBJECT-TYPE    
  INTEGER 0..2147483647  

dxatmPvcMpQoSClass 1.3.6.1.4.1.36.2.18.17.2.2.1.16
The QoS Class, as defined in section 4 of Apendix A, of this PvcMp connection at the local UNI.
OBJECT-TYPE    
  INTEGER 0..255  

dxatmPvcMpRowStatus 1.3.6.1.4.1.36.2.18.17.2.2.1.17
This object is used to create a new row or modify or delete an existing row in this table.
OBJECT-TYPE    
  INTEGER  

dxatmVirtualPathObjects 1.3.6.1.4.1.36.2.18.17.2.3
OBJECT IDENTIFIER    

dxatmVpModeTable 1.3.6.1.4.1.36.2.18.17.2.3.1
A table describing the desired and actual virtual path mode of each line card.
OBJECT-TYPE    
  SEQUENCE OF  
    DxatmVpModeEntry

dxatmVpModeEntry 1.3.6.1.4.1.36.2.18.17.2.3.1.1
Each entry describes one line card.
OBJECT-TYPE    
  DxatmVpModeEntry  

dxatmVpModeSlot 1.3.6.1.4.1.36.2.18.17.2.3.1.1.1
The front-panel slot number for the line card whose virtual path mode is to be examined or modified.
OBJECT-TYPE    
  INTEGER  

dxatmVpModeDesired 1.3.6.1.4.1.36.2.18.17.2.3.1.1.2
The desired virtual path mode for the line card in this slot. On a Version 2.0 line card, on (1) lets you use virtual path terminations - but restricts you to the use of one port. off(2) lets you use all four mod-PHY ports - but only with VPI zero. Line cards which can't support VPs or which can support them without such tradeoffs will ignore this setting.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

dxatmVpModeActual 1.3.6.1.4.1.36.2.18.17.2.3.1.1.3
The actual virtual path mode for this slot.
OBJECT-TYPE    
  INTEGER unknown(1), emptySlot(2), noVpSupport(3), vpModeOn(4), vpModeOff(5)  

dxatmVpTermTable 1.3.6.1.4.1.36.2.18.17.2.3.2
The ATM permanent virtual path termination table.
OBJECT-TYPE    
  SEQUENCE OF  
    DxatmVpTermEntry

dxatmVpTermEntry 1.3.6.1.4.1.36.2.18.17.2.3.2.1
Each entry describes one virtual path termination.
OBJECT-TYPE    
  DxatmVpTermEntry  

dxatmVpTermIfIndex 1.3.6.1.4.1.36.2.18.17.2.3.2.1.1
The value of the MIB II ifIndex object for the 'atm' port on which the virtual path is located.
OBJECT-TYPE    
  INTEGER  

dxatmVpTermVpi 1.3.6.1.4.1.36.2.18.17.2.3.2.1.2
The virtual path index.
OBJECT-TYPE    
  INTEGER 1..4095  

dxatmVpTermAdminStatus 1.3.6.1.4.1.36.2.18.17.2.3.2.1.3
The desired state of this virtual path termination. The up and down states indicate respectively that the traffic flow is enabled and disabled.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

dxatmVpTermOperStatus 1.3.6.1.4.1.36.2.18.17.2.3.2.1.4
The current operational state of the virtual path connection. The up and down states indicate respectively that this VP is operational or not operational. The unknown state indicates that the state of it cannot be determined.
OBJECT-TYPE    
  INTEGER up(1), down(2), unknown(3)  

dxatmVpTermPcr 1.3.6.1.4.1.36.2.18.17.2.3.2.1.5
The peak cell rate for the virtual path, in cells per second. If this is set to 0 (or left unset) when the VP is created, the peak cell rate will default to the link bandwidth.
OBJECT-TYPE    
  INTEGER  

dxatmVpTermScr 1.3.6.1.4.1.36.2.18.17.2.3.2.1.6
The sustained cell rate for the virtual path, in cells per second.
OBJECT-TYPE    
  INTEGER  

dxatmVpTermMbs 1.3.6.1.4.1.36.2.18.17.2.3.2.1.7
The maximum burst size.
OBJECT-TYPE    
  INTEGER  

dxatmVpTermRowStatus 1.3.6.1.4.1.36.2.18.17.2.3.2.1.8
This object is used to create a new row, or modify or delete an existing row in this table.
OBJECT-TYPE    
  INTEGER  

Defined Objects

AdPortTableEntry  
SEQUENCE    
  INTEGER as adpPortIndex  
  INTEGER as adpType  
  INTEGER as adpSubType  
  INTEGER as adpFlowMaster  
  INTEGER as adpCreditResync  
  INTEGER as adpResyncVCI  
  INTEGER as adpReceiveBuffers  
  INTEGER as adpPVCMin  
  INTEGER as adpPVCMax  
  INTEGER as adpSVCMin  
  INTEGER as adpSVCMax  
  INTEGER as adpRVCMin  
  INTEGER as adpRVCMax  
  INTEGER as adpBroadcastVCI  
  INTEGER as adpArpVCI  
  INTEGER as adpHomeVCI  
  INTEGER as adpMaxReceiveBufferCounter  
  INTEGER as adpUsedReceiveBuffers  
  INTEGER as adpRemoteFlowMaster  
  INTEGER as adpOutputBandwidth  
  INTEGER as adpAvailableOutputBandwidth  

DxatmPvcEntry  
SEQUENCE    
  INTEGER as dxatmPvcLowIfIndex  
  INTEGER as dxatmPvcLowVpi  
  INTEGER as dxatmPvcLowVci  
  INTEGER as dxatmPvcHighIfIndex  
  INTEGER as dxatmPvcHighVpi  
  INTEGER as dxatmPvcHighVci  
  INTEGER as dxatmPvcAdminStatus  
  INTEGER as dxatmPvcL2HOperStatus  
  INTEGER as dxatmPvcH2LOperStatus  
  INTEGER as dxatmPvcL2HFCStatus  
  INTEGER as dxatmPvcH2LFCStatus  
  OBJECT IDENTIFIER as dxatmPvcL2HTrafficDescriptorType  
  INTEGER as dxatmPvcL2HTrafficDescriptorParam1  
  INTEGER as dxatmPvcL2HTrafficDescriptorParam2  
  INTEGER as dxatmPvcL2HTrafficDescriptorParam3  
  INTEGER as dxatmPvcL2HTrafficDescriptorParam4  
  INTEGER as dxatmPvcL2HTrafficDescriptorParam5  
  OBJECT IDENTIFIER as dxatmPvcH2LTrafficDescriptorType  
  INTEGER as dxatmPvcH2LTrafficDescriptorParam1  
  INTEGER as dxatmPvcH2LTrafficDescriptorParam2  
  INTEGER as dxatmPvcH2LTrafficDescriptorParam3  
  INTEGER as dxatmPvcH2LTrafficDescriptorParam4  
  INTEGER as dxatmPvcH2LTrafficDescriptorParam5  
  INTEGER as dxatmPvcL2HQoSClass  
  INTEGER as dxatmPvcH2LQoSClass  
  INTEGER as dxatmPvcRowStatus  

DxatmPvcMpEntry  
SEQUENCE    
  INTEGER as dxatmPvcMpRootIfIndex  
  INTEGER as dxatmPvcMpRootVpi  
  INTEGER as dxatmPvcMpRootVci  
  INTEGER as dxatmPvcMpLeafIfIndex  
  INTEGER as dxatmPvcMpLeafVpi  
  INTEGER as dxatmPvcMpLeafVci  
  INTEGER as dxatmPvcMpAdminStatus  
  INTEGER as dxatmPvcMpOperStatus  
  INTEGER as dxatmPvcMpFCStatus  
  OBJECT IDENTIFIER as dxatmPvcMpTrafficDescriptorType  
  INTEGER as dxatmPvcMpTrafficDescriptorParam1  
  INTEGER as dxatmPvcMpTrafficDescriptorParam2  
  INTEGER as dxatmPvcMpTrafficDescriptorParam3  
  INTEGER as dxatmPvcMpTrafficDescriptorParam4  
  INTEGER as dxatmPvcMpTrafficDescriptorParam5  
  INTEGER as dxatmPvcMpQoSClass  
  INTEGER as dxatmPvcMpRowStatus  

DxatmVpModeEntry  
SEQUENCE    
  INTEGER as dxatmVpModeSlot  
  INTEGER as dxatmVpModeDesired  
  INTEGER as dxatmVpModeActual  

DxatmVpTermEntry  
SEQUENCE    
  INTEGER as dxatmVpTermIfIndex  
  INTEGER as dxatmVpTermVpi  
  INTEGER as dxatmVpTermAdminStatus  
  INTEGER as dxatmVpTermOperStatus  
  INTEGER as dxatmVpTermPcr  
  INTEGER as dxatmVpTermScr  
  INTEGER as dxatmVpTermMbs  
  INTEGER as dxatmVpTermRowStatus