DL-SLA-MIB

File: DL-SLA-MIB.mib (31548 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC-1215

Imported symbols

enterprises IpAddress Counter
OBJECT-TYPE TRAP-TYPE

Defined Objects


dl-ServiceLevelAgreement 1.3.6.1.4.1.300.260
OBJECT IDENTIFIER    

dlcSLAConfigurationGroup 1.3.6.1.4.1.300.260.1
OBJECT IDENTIFIER    

fDRThresholdTrap 1.3.6.1.4.1.300.260.1
This trap will be sent if 'fDRNumberOfThresholdViolations' is incremented. The VARIABLES contain the DLCI number whose Frame Delivery Ratio threshold violation is updated.
TRAP-TYPE    
  deliveryRatioPerDLCITableIndex  

unitSLAConfiguration 1.3.6.1.4.1.300.260.1.1
OBJECT IDENTIFIER    

configSLA 1.3.6.1.4.1.300.260.1.1.1
This object represents whether SLA is enabled or disabled on this unit.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

unitSamplingPeriodForFDR-DDR 1.3.6.1.4.1.300.260.1.1.2
This object is to configure the sampling period in minutes for Frame Delivery Ratio and Data Delivery Ratio. The default is 1 minute.
OBJECT-TYPE    
  INTEGER 1..255  

unitSamplingPeriodForDelayMeasurement 1.3.6.1.4.1.300.260.1.1.3
This object is to configure the sampling period in minutes for Delay Measurements. The default is 1 minute.
OBJECT-TYPE    
  INTEGER 1..255  

unitThresholdForFDR 1.3.6.1.4.1.300.260.1.1.4
This object is to configure the threshold in one thousandth of a percentage for Frame Delivery Ratio. A value of 0 disables the trap altogether.
OBJECT-TYPE    
  INTEGER 0..99999  

unitThresholdForDDR 1.3.6.1.4.1.300.260.1.1.5
This object is to configure the threshold in one thousandth of a percentage for Data Delivery Ratio. A value of 0 disables the trap altogether.
OBJECT-TYPE    
  INTEGER 0..99999  

unitDelayMeasurementPacketSize 1.3.6.1.4.1.300.260.1.1.6
This object is to configure the size in bytes of Delay Measurement Packets, one size of all DLCIs.
OBJECT-TYPE    
  INTEGER 50..1500  

unitOamDomainIdentifier 1.3.6.1.4.1.300.260.1.1.7
This object is the Domain Identifier for OA&M protocol. All end points participating in this SLA measurement must have the SAME OA&M Domain Identifier. The default is 0.
OBJECT-TYPE    
  Counter  

unitOamLocationIdentifier 1.3.6.1.4.1.300.260.1.1.8
This object is the Location Identifier for OA&M protocol. All end points participating in this SLA measurement must have a unique OA&M Location Identifier.
OBJECT-TYPE    
  Counter  

perDLCIConfiguration 1.3.6.1.4.1.300.260.1.2
OBJECT IDENTIFIER    

configurationPerDLCITable 1.3.6.1.4.1.300.260.1.2.1
Configuration Table Per DLCI
OBJECT-TYPE    
  SEQUENCE OF  
    ConfigurationPerDLCIEntry

configurationPerDLCIEntry 1.3.6.1.4.1.300.260.1.2.1.1
An entry in the Configuration per DLCI table.
OBJECT-TYPE    
  ConfigurationPerDLCIEntry  

configurationPerDLCITableIndex 1.3.6.1.4.1.300.260.1.2.1.1.1
The index of Configuration Per DLCI table, which is DLCI number.
OBJECT-TYPE    
  INTEGER  

commitedInformationRatePerDLCI 1.3.6.1.4.1.300.260.1.2.1.1.2
This is the DLCI's Committed Information Rate (CIR). The CIR can be discovered automatically if LMI Rev 1.0 is used. If Annex A or Annex D is used, then the CIR must be entered manually in the DLCI table. The DLCI table is in the enterprise MIB.
OBJECT-TYPE    
  INTEGER 0..1536000  

remoteDLCIPerDLCI 1.3.6.1.4.1.300.260.1.2.1.1.3
DLCI of the far end unit on each DLCI, which is discovered using Frame Relay OA&M Protocol. It will be stored in volatile memory.
OBJECT-TYPE    
  INTEGER  

remoteIpAddressPerDLCI 1.3.6.1.4.1.300.260.1.2.1.1.4
IP Address of the NET port of the far end unit on each DLCI, which is discovered using Frame Relay OA&M Protocol. It will be stored in volatile memory.
OBJECT-TYPE    
  IpAddress  

thresholdForDelayMeasurementsPerDLCI 1.3.6.1.4.1.300.260.1.2.1.1.5
This object represents this DLCI's delay threshold in milliseconds. The default is 64000. A value of 0 disables the trap altogether.
OBJECT-TYPE    
  INTEGER 0..64000  

dlcSLAStatisticsGroup 1.3.6.1.4.1.300.260.2
OBJECT IDENTIFIER    

dDRThresholdTrap 1.3.6.1.4.1.300.260.2
This trap will be sent if 'dDRNumberOfThresholdViolations' is incremented. The VARIABLES contain the DLCI number whose Data Delivery Ratio threshold violation is updated.
TRAP-TYPE    
  deliveryRatioPerDLCITableIndex  

dlcDeliveryRatioStatistics 1.3.6.1.4.1.300.260.2.1
OBJECT IDENTIFIER    

deliveryRatioPerDLCITable 1.3.6.1.4.1.300.260.2.1.1
Lifetime Delivery counter Table Per DLCI, contains both Frame Delivery Ratio and Data Delivery Ratio.
OBJECT-TYPE    
  SEQUENCE OF  
    DeliveryRatioPerDLCIEntry

deliveryRatioPerDLCIEntry 1.3.6.1.4.1.300.260.2.1.1.1
An entry in the Delivery Ratio table.
OBJECT-TYPE    
  DeliveryRatioPerDLCIEntry  

deliveryRatioPerDLCITableIndex 1.3.6.1.4.1.300.260.2.1.1.1.1
The index of Delivery Ratio Table, which is the same value as configurationPerDLCITableIndex.
OBJECT-TYPE    
  INTEGER  

deliveryTableEncodedValue 1.3.6.1.4.1.300.260.2.1.1.1.2
This object represents the value of the whole row of the table. If the table. The intent of object is to increase the efficiency of retrieving the table. For each object value in this table, which are all of Counter type, it will be represented with 4 bytes of data. The byte order of the Counter value will be MSB ... LSB. This object will contain the value of all objects on the table, except 'deliveryRatioPerDLCITableIndex'.
OBJECT-TYPE    
  OCTET STRING  

deliveryTableTimestamp 1.3.6.1.4.1.300.260.2.1.1.1.3
Timestamp of the last sample for delivery Entry statistics. Each time the near end of the DLCI receives Delivery Ratio Results Information Field, this number will contain the unit's current timestamp. A timestamp is a 32-bit number representing the number of seconds that have elapsed since 12:00AM, January 1, 1970.
OBJECT-TYPE    
  Counter  

fTCLperDLCI 1.3.6.1.4.1.300.260.2.1.1.1.4
Number of frames transmitted at the near end within CIR on this DLCI.
OBJECT-TYPE    
  Counter  

fTELperDLCI 1.3.6.1.4.1.300.260.2.1.1.1.5
Number of frames transmitted at the near end above CIR on this DLCI
OBJECT-TYPE    
  Counter  

fRCLperDLCI 1.3.6.1.4.1.300.260.2.1.1.1.6
Number of frames received at the near end on this DLCI within CIR. These frames will have the Discard Eligible (DE) bit reset.
OBJECT-TYPE    
  Counter  

fRELperDLCI 1.3.6.1.4.1.300.260.2.1.1.1.7
Number of frames received at the near end on this DLCI above CIR. These frames will have the Discard Eligible (DE) bit set.
OBJECT-TYPE    
  Counter  

fTCRperDLCI 1.3.6.1.4.1.300.260.2.1.1.1.8
Number of frames transmitted at the far end within CIR on this DLCI.
OBJECT-TYPE    
  Counter  

fTERperDLCI 1.3.6.1.4.1.300.260.2.1.1.1.9
Number of frames transmitted at the far end above CIR on this DLCI.
OBJECT-TYPE    
  Counter  

fRCRperDLCI 1.3.6.1.4.1.300.260.2.1.1.1.10
Number of frames received at the far end on this DLCI within CIR. These frames will have the Discard Eligible (DE) bit reset.
OBJECT-TYPE    
  Counter  

fRERperDLCI 1.3.6.1.4.1.300.260.2.1.1.1.11
Number of frames received at the far end on this DLCI above CIR. These frames will have the Discard Eligible (DE) bit set.
OBJECT-TYPE    
  Counter  

fDRNumberOfSamplesTaken 1.3.6.1.4.1.300.260.2.1.1.1.12
Number of samples taken for Frame Delivery Statistics. Each time the near end receives the Frame Delivery Ratio Results Information Field, this counter will be incremented.
OBJECT-TYPE    
  Counter  

fDRNumberOfThresholdViolations 1.3.6.1.4.1.300.260.2.1.1.1.13
Number of threshold violations for Frame Delivery. FDRCL = fRCRPerDLCI / fTCLPerDLCI FDRCR = fRCLPerDLCI / fTCRPerDLCI For each sample, FDRCL and FDRCR are compared to the threshold configured on object 'unitThresholdForFDR'. When either FDRCL or FDRCR is less than the threshold, this counter is incremented.
OBJECT-TYPE    
  Counter  

dTCLperDLCI 1.3.6.1.4.1.300.260.2.1.1.1.14
Number of bytes transmitted to the network within CIR on this DLCI.
OBJECT-TYPE    
  Counter  

dTELperDLCI 1.3.6.1.4.1.300.260.2.1.1.1.15
Number of bytes transmitted to the network above CIR on this DLCI
OBJECT-TYPE    
  Counter  

dRCLperDLCI 1.3.6.1.4.1.300.260.2.1.1.1.16
Number of bytes received at the near end on this DLCI within CIR. These frames will have the Discard Eligible (DE) bit reset.
OBJECT-TYPE    
  Counter  

dRELperDLCI 1.3.6.1.4.1.300.260.2.1.1.1.17
Number of bytes received at the near end of this DLCI above CIR. These frames will have the Discard Eligible (DE) bit set.
OBJECT-TYPE    
  Counter  

dTCRperDLCI 1.3.6.1.4.1.300.260.2.1.1.1.18
Number of bytes transmitted at the far end within CIR on this DLCI.
OBJECT-TYPE    
  Counter  

dTERperDLCI 1.3.6.1.4.1.300.260.2.1.1.1.19
Number of bytes transmitted at the far end above CIR on this DLCI.
OBJECT-TYPE    
  Counter  

dRCRperDLCI 1.3.6.1.4.1.300.260.2.1.1.1.20
Number of bytes received at the far end on this DLCI above CIR. These frames will have the Discard Eligible (DE) bit reset.
OBJECT-TYPE    
  Counter  

dRERperDLCI 1.3.6.1.4.1.300.260.2.1.1.1.21
Number of bytes received at the far end on his DLCI above CIR. These frames will have the Discard Eligible (DE) bit set.
OBJECT-TYPE    
  Counter  

dDRNumberOfSamplesTaken 1.3.6.1.4.1.300.260.2.1.1.1.22
Number of samples taken for Data Delivery statistics. Each time the near end receives the Data Delivery Ratio Results Information Field, this counter will be incremented.
OBJECT-TYPE    
  Counter  

dDRNumberOfThresholdViolations 1.3.6.1.4.1.300.260.2.1.1.1.23
Number of threshold violations for Data Delivery statistics. DDRCL = dRCRPerDLCI / dTCLPerDLCI DDRCR = dRCLPerDLCI / dTCRPerDLCI For each sample, DDRCL and DDRCR are compared to the threshold configured on object 'unitThresholdForDDR'. When either DDRCL or DDRCR is less than the threshold, this counter is incremented.
OBJECT-TYPE    
  Counter  

txFDRTimestamp 1.3.6.1.4.1.300.260.2.1.1.1.24
Timestamp of the last sample for delivery Entry statistics. Each time the near end of the DLCI receives Delivery Ratio Results Information Field, this number will contain the unit's current timestamp. A timestamp is a 32-bit number representing the number of seconds that have elapsed since 12:00AM, January 1, 1970.
OBJECT-TYPE    
  Counter  

txFDRNumberOfSamplesTaken 1.3.6.1.4.1.300.260.2.1.1.1.25
Number of samples taken for Frame Delivery Statistics. Each time the near end receives the Frame Delivery Ratio Results Information Field, this counter will be incremented.
OBJECT-TYPE    
  Counter  

txFDRNumberOfThresholdViolations 1.3.6.1.4.1.300.260.2.1.1.1.26
Number of threshold violations for Frame Delivery. FDRCL = fRCRPerDLCI / fTCLPerDLCI For each sample, FDRCL is compared to the threshold configured on object 'unitThresholdForFDR'. When FDRCL is less than the threshold, this counter is incremented.
OBJECT-TYPE    
  Counter  

rxFDRTimestamp 1.3.6.1.4.1.300.260.2.1.1.1.27
Timestamp of the last sample for delivery Entry statistics. Each time the near end of the DLCI receives Delivery Ratio poll, this number will contain the unit's current timestamp. A timestamp is a 32-bit number representing the number of seconds that have elapsed since 12:00AM, January 1, 1970.
OBJECT-TYPE    
  Counter  

rxFDRNumberOfSamplesTaken 1.3.6.1.4.1.300.260.2.1.1.1.28
Number of samples taken for Frame Delivery Statistics. Each time the near end receives the Frame Delivery Ratio poll, this counter will be incremented.
OBJECT-TYPE    
  Counter  

rxFDRNumberOfThresholdViolations 1.3.6.1.4.1.300.260.2.1.1.1.29
Number of threshold violations for Frame Delivery. FDRCR = fRCLPerDLCI / fTCRPerDLCI For each sample, FDRCR is compared to the threshold configured on object 'unitThresholdForFDR'. When FDRCR is less than the threshold, this counter is incremented.
OBJECT-TYPE    
  Counter  

txDDRTimestamp 1.3.6.1.4.1.300.260.2.1.1.1.30
Timestamp of the last sample for delivery Entry statistics. Each time the near end of the DLCI receives Delivery Ratio Results Information Field, this number will contain the unit's current timestamp. A timestamp is a 32-bit number representing the number of seconds that have elapsed since 12:00AM, January 1, 1970.
OBJECT-TYPE    
  Counter  

txDDRNumberOfSamplesTaken 1.3.6.1.4.1.300.260.2.1.1.1.31
Number of samples taken for DataDelivery Statistics. Each time the near end receives the Data Delivery Ratio Results Information Field, this counter will be incremented.
OBJECT-TYPE    
  Counter  

txDDRNumberOfThresholdViolations 1.3.6.1.4.1.300.260.2.1.1.1.32
Number of threshold violations for Data Delivery. DDRCL = dRCRPerDLCI / dTCLPerDLCI For each sample, DDRCL is compared to the threshold configured on object 'unitThresholdForDDR'. When DDRCL is less than the threshold, this counter is incremented.
OBJECT-TYPE    
  Counter  

rxDDRTimestamp 1.3.6.1.4.1.300.260.2.1.1.1.33
Timestamp of the last sample for delivery Entry statistics. Each time the near end of the DLCI receives Delivery Ratio poll, this number will contain the unit's current timestamp. A timestamp is a 32-bit number representing the number of seconds that have elapsed since 12:00AM, January 1, 1970.
OBJECT-TYPE    
  Counter  

rxDDRNumberOfSamplesTaken 1.3.6.1.4.1.300.260.2.1.1.1.34
Number of samples taken for Data Delivery Statistics. Each time the near end receives the Data Delivery Ratio poll, this counter will be incremented.
OBJECT-TYPE    
  Counter  

rxDDRNumberOfThresholdViolations 1.3.6.1.4.1.300.260.2.1.1.1.35
Number of threshold violations for Data Delivery. DDRCR = dRCLPerDLCI / dTCRPerDLCI For each sample, DDRCR is compared to the threshold configured on object 'unitThresholdForDDR'. When DDRCR is less than the threshold, this counter is incremented.
OBJECT-TYPE    
  Counter  

txDiscardEligible 1.3.6.1.4.1.300.260.2.1.1.1.36
Number of Discard Eligible counters transmitted at the near end. This counter has the same value as object 'etherStatsFragments' in RMON MIB (RFC 1757) for DTE port.
OBJECT-TYPE    
  Counter  

rxDiscardEligible 1.3.6.1.4.1.300.260.2.1.1.1.37
Number of Discard Eligible counters received by the near end. This counter has the same value as object 'etherStatsFragments' in RMON MIB (RFC 1757) for DCE port
OBJECT-TYPE    
  Counter  

txFECN 1.3.6.1.4.1.300.260.2.1.1.1.38
Number of FECN counters transmitted at the near end. This counter has the same value as object 'etherStatsCollisions' in RMON MIB (RFC 1757) for DTE port.
OBJECT-TYPE    
  Counter  

rxFECN 1.3.6.1.4.1.300.260.2.1.1.1.39
Number of FECN counters received by the near end. This counter has the same value as object 'etherStatsCollisions' in RMON MIB (RFC 1757) for DCE port.
OBJECT-TYPE    
  Counter  

txBECN 1.3.6.1.4.1.300.260.2.1.1.1.40
Number of BECN counters transmitted at the near end. This counter has the same value as object 'etherStatsJabbers' in RMON MIB (RFC 1757) for DTE port.
OBJECT-TYPE    
  Counter  

rxBECN 1.3.6.1.4.1.300.260.2.1.1.1.41
Number of BECN counters received by the near end. This counter has the same value as object 'etherStatsJabbers' in RMON MIB (RFC 1757) for DCE port.
OBJECT-TYPE    
  Counter  

dlcDelayStatistics 1.3.6.1.4.1.300.260.2.2
OBJECT IDENTIFIER    

delayPerDLCITable 1.3.6.1.4.1.300.260.2.2.1
Delay Table Per DLCI
OBJECT-TYPE    
  SEQUENCE OF  
    DelayPerDLCIEntry

delayPerDLCIEntry 1.3.6.1.4.1.300.260.2.2.1.1
An entry in the Delay per DLCI table.
OBJECT-TYPE    
  DelayPerDLCIEntry  

delayPerDLCITableIndex 1.3.6.1.4.1.300.260.2.2.1.1.1
The index of Delay Table, which is DLCI number.
OBJECT-TYPE    
  INTEGER  

delayTableEncodedValue 1.3.6.1.4.1.300.260.2.2.1.1.2
This object represents the value of the whole row of the table. If the table. The intent of object is to increase the efficiency of retrieving the table. For each object value in this table, which are all of Counter type, it will be represented with 4 bytes of data. The byte order of the Counter value will be MSB ... LSB. This object will contain the value of all objects on the table, except 'delayPerDLCITableIndex'.
OBJECT-TYPE    
  OCTET STRING  

delayTableTimestamp 1.3.6.1.4.1.300.260.2.2.1.1.3
Timestamp for Delay Table entry. Each time the near end of the DLCI receives an OA&M message containing a Frame Transfer Delay Information Field, this number will contain the unit's current timestamp. A timestamp is a 32-bit number representing the number of seconds that have elapsed since 12:00AM, January 1, 1970.
OBJECT-TYPE    
  Counter  

totalRoundTripDelayPerDLCI 1.3.6.1.4.1.300.260.2.2.1.1.4
Sum of all the round trip delay measurements taken so far.
OBJECT-TYPE    
  Counter  

maximumRoundTripDelayNSamplesPerDLCI 1.3.6.1.4.1.300.260.2.2.1.1.5
Maximum Round Trip Delay in last n samples. N is 15.
OBJECT-TYPE    
  Counter  

maximumRoundTripDelay2NSamplesPerDLCI 1.3.6.1.4.1.300.260.2.2.1.1.6
Maximum Round Trip Delay in last 2N samples. N is 15.
OBJECT-TYPE    
  Counter  

maximumRoundTripDelay4NSamplesPerDLCI 1.3.6.1.4.1.300.260.2.2.1.1.7
Maximum Round Trip Delay in last 4n samples. N is 15.
OBJECT-TYPE    
  Counter  

numberOfDelayMeasurementsPerDLCI 1.3.6.1.4.1.300.260.2.2.1.1.8
Number of delay measurements per DLCI. Each time the near end receives an OA&M message containing a Frame Transfer Delay Information Field, this counter will be incremented.
OBJECT-TYPE    
  Counter  

delayNumberOfThresholdViolations 1.3.6.1.4.1.300.260.2.2.1.1.9
Number of threshold violations on Delay measurement. If an individual delay measurement on this DLCI is greater than the threshold value configured in object 'thresholdForDelayMeasurementPerDLCI', this counter will be incremented.
OBJECT-TYPE    
  Counter  

dlcOutageStatistics 1.3.6.1.4.1.300.260.2.3
OBJECT IDENTIFIER    

outagePerDLCITable 1.3.6.1.4.1.300.260.2.3.1
Outage Table Per DLCI
OBJECT-TYPE    
  SEQUENCE OF  
    OutagePerDLCIEntry

outagePerDLCIEntry 1.3.6.1.4.1.300.260.2.3.1.1
An entry in the Outage per DLCI table.
OBJECT-TYPE    
  OutagePerDLCIEntry  

outageTableIndex 1.3.6.1.4.1.300.260.2.3.1.1.1
Index of Outage Table, which is the DLCI number.
OBJECT-TYPE    
  INTEGER  

outageTableEncodedValue 1.3.6.1.4.1.300.260.2.3.1.1.2
This object represents the value of the whole row of the table. If the table. The intent of object is to increase the efficiency of retrieving the table. For each object value in this table, which are all of Counter type, it will be represented with 4 bytes of data. The byte order of the Counter value will be MSB ... LSB. This object will contain the value of all objects on the table, except 'outageTableIndex'.
OBJECT-TYPE    
  OCTET STRING  

outageTableTimestamp 1.3.6.1.4.1.300.260.2.3.1.1.3
Timestamp of when this Outage Table entry last updated. A timestamp is a 32-bit number representing the number of seconds that have elapsed since 12:00AM, January 1, 1970.
OBJECT-TYPE    
  Counter  

outageStatus 1.3.6.1.4.1.300.260.2.3.1.1.4
OBJECT-TYPE    
  INTEGER unknown(1), no-outage(2), excluded-outage(3), included-outage(4)  

numberOfOutageCounter 1.3.6.1.4.1.300.260.2.3.1.1.5
Number of outages.
OBJECT-TYPE    
  Counter  

periodOfOutages 1.3.6.1.4.1.300.260.2.3.1.1.6
The sum total of how long the outages are.
OBJECT-TYPE    
  Counter  

numberOfExcludedOutageCounter 1.3.6.1.4.1.300.260.2.3.1.1.7
Number of excluded outages.
OBJECT-TYPE    
  Counter  

periodOfExcludedOutages 1.3.6.1.4.1.300.260.2.3.1.1.8
The sum total of how long excluded outages are.
OBJECT-TYPE    
  Counter  

outageTableLastTimestamp 1.3.6.1.4.1.300.260.2.3.2
This object contains timestamp (in seconds) of the last time 'outagePerDLCITable' is updated (changed).
OBJECT-TYPE    
  Counter  

delayThresholdTrap 1.3.6.1.4.1.300.260.3
This trap will be sent if 'delayNumberOfThresholdViolations' is incremented. The VARIABLES contain the DLCI number whose Delay threshold violation is updated.
TRAP-TYPE    
  delayPerDLCITableIndex  

Defined Objects

ConfigurationPerDLCIEntry  
SEQUENCE    
  INTEGER as configurationPerDLCITableIndex  
  INTEGER as commitedInformationRatePerDLCI  
  INTEGER as remoteDLCIPerDLCI  
  IpAddress as remoteIpAddressPerDLCI  
  INTEGER as thresholdForDelayMeasurementsPerDLCI  

DeliveryRatioPerDLCIEntry  
SEQUENCE    
  INTEGER as deliveryRatioPerDLCITableIndex  
  OCTET STRING as deliveryTableEncodedValue  
  Counter as deliveryTableTimestamp  
  Counter as fTCLperDLCI  
  Counter as fTELperDLCI  
  Counter as fRCLperDLCI  
  Counter as fRELperDLCI  
  Counter as fTCRperDLCI  
  Counter as fTERperDLCI  
  Counter as fRCRperDLCI  
  Counter as fRERperDLCI  
  Counter as fDRNumberOfSamplesTaken  
  Counter as fDRNumberOfThresholdViolations  
  Counter as dTCLperDLCI  
  Counter as dTELperDLCI  
  Counter as dRCLperDLCI  
  Counter as dRELperDLCI  
  Counter as dTCRperDLCI  
  Counter as dTERperDLCI  
  Counter as dRCRperDLCI  
  Counter as dRERperDLCI  
  Counter as dDRNumberOfSamplesTaken  
  Counter as dDRNumberOfThresholdViolations  
  Counter as txFDRTimestamp  
  Counter as txFDRNumberOfSamplesTaken  
  Counter as txFDRNumberOfThresholdViolations  
  Counter as rxFDRTimestamp  
  Counter as rxFDRNumberOfSamplesTaken  
  Counter as rxFDRNumberOfThresholdViolations  
  Counter as txDDRTimestamp  
  Counter as txDDRNumberOfSamplesTaken  
  Counter as txDDRNumberOfThresholdViolations  
  Counter as rxDDRTimestamp  
  Counter as rxDDRNumberOfSamplesTaken  
  Counter as rxDDRNumberOfThresholdViolations  
  Counter as txDiscardEligible  
  Counter as rxDiscardEligible  
  Counter as txFECN  
  Counter as rxFECN  
  Counter as txBECN  
  Counter as rxBECN  

DelayPerDLCIEntry  
SEQUENCE    
  INTEGER as delayPerDLCITableIndex  
  OCTET STRING as delayTableEncodedValue  
  Counter as delayTableTimestamp  
  Counter as totalRoundTripDelayPerDLCI  
  Counter as maximumRoundTripDelayNSamplesPerDLCI  
  Counter as maximumRoundTripDelay2NSamplesPerDLCI  
  Counter as maximumRoundTripDelay4NSamplesPerDLCI  
  Counter as numberOfDelayMeasurementsPerDLCI  
  Counter as delayNumberOfThresholdViolations  

OutagePerDLCIEntry  
SEQUENCE    
  INTEGER as outageTableIndex  
  OCTET STRING as outageTableEncodedValue  
  Counter as outageTableTimestamp  
  INTEGER as outageStatus  
  Counter as numberOfOutageCounter  
  Counter as periodOfOutages  
  Counter as numberOfExcludedOutageCounter  
  Counter as periodOfExcludedOutages