DMTF-LAN-ADAPTER-MIB

File: DMTF-LAN-ADAPTER-MIB.mib (18548 bytes)

Imported modules

SNMPv2-SMI DMTF-DMI-MIB

Imported symbols

OBJECT-TYPE NOTIFICATION-TYPE MODULE-IDENTITY
enterprises Counter32 Counter64
Gauge32 Integer32 DmiString
dmiEventDateTime dmiCompId dmiEventSeverity
dmiEventStateKey dmiEventAssociatedGroup dmiEventSystem
dmiEventSubSystem

Defined Objects

dmtf 1.3.6.1.4.1.412
OBJECT IDENTIFIER    

dmtfStdMifs 1.3.6.1.4.1.412.2
OBJECT IDENTIFIER    

dmtfLANAdapterMIF 1.3.6.1.4.1.412.2.2
This MIB is a translation of the DMTF LAN Adapter MIF, based on the translation rules defined by the DMTF DMI to SNMP Mapping Standard, Version 1.0. DMI-based systems running a DMI-to-SNMP Mapping Agent provide the ability to access DMI component instrumentation via SNMP protocol operations.
MODULE-IDENTITY    

dmtfNetworkAdapter802PortTable 1.3.6.1.4.1.412.2.2.1
Contains objects related to each of the network ports on the network adapter.
OBJECT-TYPE    
  SEQUENCE OF  
    SdmtfNetworkAdapter802Port

dmtfNetworkAdapter802PortEntry 1.3.6.1.4.1.412.2.2.1.1
Contains objects related to each of the network ports on the network adapter.
OBJECT-TYPE    
  SdmtfNetworkAdapter802Port  

dmtfNetworkAdapter802PortState 1.3.6.1.4.1.412.2.2.1.1.0
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

portIndex2 1.3.6.1.4.1.412.2.2.1.1.1
This attribute is the ordinal of the network port within the network adapter, i.e. the 'port number'.
OBJECT-TYPE    
  DmiInteger  

permanentNetworkAddress 1.3.6.1.4.1.412.2.2.1.1.2
This is the node address stored permanently in the adapter.
OBJECT-TYPE    
  DmiString  

currentNetworkAddress 1.3.6.1.4.1.412.2.2.1.1.3
This is the node address that can be modified by software, sometimes referred to as the Locally Administered Address (LAA).
OBJECT-TYPE    
  DmiString  

connectorType 1.3.6.1.4.1.412.2.2.1.1.4
This is the type of connector currently being used to physically attach this port to the LAN.
OBJECT-TYPE    
  INTEGER unknown(1), aUI(2), uTPCategory3(3), uTPCategory4(4), uTPCategory5(5), bNC(6), sTPRJ45(7), sTPDB9(8), fiberMIC(9), appleAUI(10)  

dataRate 1.3.6.1.4.1.412.2.2.1.1.5
This is the rate at which data is transferred over the LAN in Mbps.
OBJECT-TYPE    
  DmiInteger  

totalPacketsTransmitted 1.3.6.1.4.1.412.2.2.1.1.6
This is the total number of packets transmitted.
OBJECT-TYPE    
  DmiCounter64  

totalBytesTransmitted 1.3.6.1.4.1.412.2.2.1.1.7
This is the total number of bytes transmitted.
OBJECT-TYPE    
  DmiCounter64  

totalPacketsReceived 1.3.6.1.4.1.412.2.2.1.1.8
This is the total number of packets received.
OBJECT-TYPE    
  DmiCounter64  

totalBytesReceived 1.3.6.1.4.1.412.2.2.1.1.9
This is the total number of bytes received.
OBJECT-TYPE    
  DmiCounter64  

totalTransmitErrors 1.3.6.1.4.1.412.2.2.1.1.10
This is the total number of transmit errors of any type.
OBJECT-TYPE    
  DmiCounter64  

totalReceiveErrors 1.3.6.1.4.1.412.2.2.1.1.11
This is the total number of receive errors of any type.
OBJECT-TYPE    
  DmiCounter64  

totalHostErrors 1.3.6.1.4.1.412.2.2.1.1.12
This is the total number of errors due to problems with the network adapter host interface.(e.g. overrun / underrun errors).
OBJECT-TYPE    
  DmiCounter64  

totalWireErrors 1.3.6.1.4.1.412.2.2.1.1.13
This is the total number of errors due to problems with the network (e.g. receive CRC Errors).
OBJECT-TYPE    
  DmiCounter64  

dmtf802AlternateAddressTable 1.3.6.1.4.1.412.2.2.2
Contains objects related to alternate addresses for each network adapter port.
OBJECT-TYPE    
  SEQUENCE OF  
    Sdmtf802AlternateAddress

dmtf802AlternateAddressEntry 1.3.6.1.4.1.412.2.2.2.1
Contains objects related to alternate addresses for each network adapter port.
OBJECT-TYPE    
  Sdmtf802AlternateAddress  

dmtf802AlternateAddressState 1.3.6.1.4.1.412.2.2.2.1.0
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

alternateAddressIndex 1.3.6.1.4.1.412.2.2.2.1.1
This is an arbitrary number assigned to each alternate address. The Alternate Address Index usually starts with 1 and increments for each additional alternate address.
OBJECT-TYPE    
  DmiInteger  

portIndex 1.3.6.1.4.1.412.2.2.2.1.2
The value of the Port Index attribute for the network port that uses this alternate address, i.e. the 'port number'.
OBJECT-TYPE    
  DmiInteger  

addressType 1.3.6.1.4.1.412.2.2.2.1.3
This is the type of alternate address, e.g. multicast, functiona , etc.
OBJECT-TYPE    
  INTEGER multicast(1), functional(2), group(3)  

alternateAddress 1.3.6.1.4.1.412.2.2.2.1.4
This is the actual alternate address value.
OBJECT-TYPE    
  DmiString  

dmtfNetworkAdapterDriverTable 1.3.6.1.4.1.412.2.2.3
OBJECT-TYPE    
  SEQUENCE OF  
    SdmtfNetworkAdapterDriver

dmtfNetworkAdapterDriverEntry 1.3.6.1.4.1.412.2.2.3.1
OBJECT-TYPE    
  SdmtfNetworkAdapterDriver  

dmtfNetworkAdapterDriverState 1.3.6.1.4.1.412.2.2.3.1.0
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

driverIndex 1.3.6.1.4.1.412.2.2.3.1.1
OBJECT-TYPE    
  DmiInteger  

driverSoftwareName 1.3.6.1.4.1.412.2.2.3.1.2
OBJECT-TYPE    
  DmiString  

driverSoftwareVersion 1.3.6.1.4.1.412.2.2.3.1.3
OBJECT-TYPE    
  DmiString  

driverSoftwareDescription 1.3.6.1.4.1.412.2.2.3.1.4
OBJECT-TYPE    
  DmiString  

driverSize 1.3.6.1.4.1.412.2.2.3.1.5
OBJECT-TYPE    
  DmiInteger  

driverInterfaceType 1.3.6.1.4.1.412.2.2.3.1.6
OBJECT-TYPE    
  INTEGER other(1), iPX(2), oDI(3), nDIS(4), packetDriver(5), lANtastic(6), uNIX(7), appletalk(8), iBMLanSupportProgram(9), lLC(10), netbios(11), pathworksDLL(12)  

driverInterfaceVersion 1.3.6.1.4.1.412.2.2.3.1.7
OBJECT-TYPE    
  DmiString  

driverInterfaceDescription 1.3.6.1.4.1.412.2.2.3.1.8
OBJECT-TYPE    
  DmiString  

dmtfNetworkAdapterHardwareTable 1.3.6.1.4.1.412.2.2.4
Contains objects related to the network adapter hardware.
OBJECT-TYPE    
  SEQUENCE OF  
    SdmtfNetworkAdapterHardware

dmtfNetworkAdapterHardwareEntry 1.3.6.1.4.1.412.2.2.4.1
Contains objects related to the network adapter hardware.
OBJECT-TYPE    
  SdmtfNetworkAdapterHardware  

networkTopology 1.3.6.1.4.1.412.2.2.4.1.1
This is the network media access method/topology supported by this adapter.
OBJECT-TYPE    
  INTEGER other(1), x10MbpsEthernet(2), x100MbpsEthernet(3), x10010MbpsEthernet(4), x100MbpsVGAnyLAN(5), x4MbpsTokenRing(6), x16MbpsTokenRing(7), x164MbpsTokenRing(8), x2MbpsArcnet(9), x20MbpsArcnet(10), fDDI(11), aTM(12), appleTalk(13)  

transmissionCapability 1.3.6.1.4.1.412.2.2.4.1.2
The transmission capabilities of the adapter.
OBJECT-TYPE    
  INTEGER normal(1), fullDuplex(2)  

networkAdapterRAMSize 1.3.6.1.4.1.412.2.2.4.1.3
This is the total size of adapter RAM in Kb.
OBJECT-TYPE    
  DmiInteger  

busType 1.3.6.1.4.1.412.2.2.4.1.4
This is the type of bus used to interface the adapter to the host.
OBJECT-TYPE    
  INTEGER other(1), iSA(2), eISA(3), mCA(4), pCI(5), vL(6), pCMCIA(7), parallel(8), nEC98(9), motherboard(256)  

busWidth 1.3.6.1.4.1.412.2.2.4.1.5
This is the width (in bits) of the data path used to interface the adapter with the host.
OBJECT-TYPE    
  INTEGER other(1), unknown(2), x8BitCard(3), x16BitCard(4), x32BitCard(5), x64BitCard(6), x128BitCard(7)  

dmtfBootROMConfigurationTable 1.3.6.1.4.1.412.2.2.5
This group describes the characteristics of the boot ROM.
OBJECT-TYPE    
  SEQUENCE OF  
    SdmtfBootROMConfiguration

dmtfBootROMConfigurationEntry 1.3.6.1.4.1.412.2.2.5.1
This group describes the characteristics of the boot ROM.
OBJECT-TYPE    
  SdmtfBootROMConfiguration  

bootROMDescription 1.3.6.1.4.1.412.2.2.5.1.1
This is the description of the software contained in the boot ROM.
OBJECT-TYPE    
  DmiString  

bootROMVersion 1.3.6.1.4.1.412.2.2.5.1.2
This is the version number of the boot ROM software.
OBJECT-TYPE    
  DmiString  

remoteBootProtocolType 1.3.6.1.4.1.412.2.2.5.1.3
This is the type of remote boot protocol supported by this ROM.
OBJECT-TYPE    
  INTEGER other(1), none(2), rPL(3), bootP(4), dECMOP(5), nativeNetWare(6)  

remoteBootProtocolVersion 1.3.6.1.4.1.412.2.2.5.1.4
The version of the remote boot protocol supported by this ROM.
OBJECT-TYPE    
  DmiString  

dmtfBootROMCapabilitiesTable 1.3.6.1.4.1.412.2.2.6
This group describes the capabilities or special features supported by this ROM.
OBJECT-TYPE    
  SEQUENCE OF  
    SdmtfBootROMCapabilities

dmtfBootROMCapabilitiesEntry 1.3.6.1.4.1.412.2.2.6.1
This group describes the capabilities or special features supported by this ROM.
OBJECT-TYPE    
  SdmtfBootROMCapabilities  

dmtfBootROMCapabilitiesState 1.3.6.1.4.1.412.2.2.6.1.0
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

capabilityIndex 1.3.6.1.4.1.412.2.2.6.1.1
This is an arbitrary number assigned to each capability. The Capability Index usually starts with 1 and increments for each additional capability.
OBJECT-TYPE    
  DmiInteger  

capabilityDescription 1.3.6.1.4.1.412.2.2.6.1.2
This is a clear description of a property or special feature of the ROM, e.g. 'virus protection'.
OBJECT-TYPE    
  DmiString  

capabilityStatus 1.3.6.1.4.1.412.2.2.6.1.3
The current state or value associated with the capability or special feature, e.g. 'enabled', 'active', etc.
OBJECT-TYPE    
  DmiString  

dmtfDynOids 1.3.6.1.4.1.412.3
OBJECT IDENTIFIER    

Defined Objects

DmiCounter  
Counter32    

DmiCounter64  
Counter64    

DmiGauge  
Gauge32    

DmiInteger  
Integer32    

DmiOctetstring  
OCTET STRING    

DmiCompId  
INTEGER    

DmiGroupId  
INTEGER    

Sdmtf802AlternateAddress  
SEQUENCE    
  INTEGER as dmtf802AlternateAddressState  
  DmiInteger as alternateAddressIndex  
  DmiInteger as portIndex  
  DmiInteger as addressType  
  DmiString as alternateAddress  

SdmtfBootROMCapabilities  
SEQUENCE    
  INTEGER as dmtfBootROMCapabilitiesState  
  DmiInteger as capabilityIndex  
  DmiString as capabilityDescription  
  DmiString as capabilityStatus  

SdmtfBootROMConfiguration  
SEQUENCE    
  DmiString as bootROMDescription  
  DmiString as bootROMVersion  
  DmiInteger as remoteBootProtocolType  
  DmiString as remoteBootProtocolVersion  

SdmtfNetworkAdapter802Port  
SEQUENCE    
  INTEGER as dmtfNetworkAdapter802PortState  
  DmiInteger as portIndex  
  DmiString as permanentNetworkAddress  
  DmiString as currentNetworkAddress  
  DmiInteger as connectorType  
  DmiInteger as dataRate  
  DmiCounter64 as totalPacketsTransmitted  
  DmiCounter64 as totalBytesTransmitted  
  DmiCounter64 as totalPacketsReceived  
  DmiCounter64 as totalBytesReceived  
  DmiCounter64 as totalTransmitErrors  
  DmiCounter64 as totalReceiveErrors  
  DmiCounter64 as totalHostErrors  
  DmiCounter64 as totalWireErrors  

SdmtfNetworkAdapterDriver  
SEQUENCE    
  INTEGER as dmtfNetworkAdapterDriverState  
  DmiInteger as driverIndex  
  DmiString as driverSoftwareName  
  DmiString as driverSoftwareVersion  
  DmiString as driverSoftwareDescription  
  DmiInteger as driverSize  
  DmiInteger as driverInterfaceType  
  DmiString as driverInterfaceVersion  
  DmiString as driverInterfaceDescription  

SdmtfNetworkAdapterHardware  
SEQUENCE    
  DmiInteger as networkTopology  
  DmiInteger as transmissionCapability  
  DmiInteger as networkAdapterRAMSize  
  DmiInteger as busType  
  DmiInteger as busWidth